High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill (Short) – 3 mm | 118° | TiN-coated | HSS-G | DIN 338 The Twist Drill is a short HSS-G metalworking drill designed for Drilling Machines, offering a TiN-coated surface, a 118° tip and a fully ground shank for stable, precise metal drilling. Short design for higher stability and precision TiN-coated surface for extended tool life HSS-G fully ground for faster, cleaner cuts 118° tip for improved centring on curved surfaces Precision and Durability for Metalworking Deriving strength from HSS-G material, this Twist Drill combines a TiN-coated surface with a fully ground geometry to reduce friction and extend tool life when machining metal. The TiN layer lowers wear at the cutting edges and supports longer cutting intervals, especially when a suitable cooling system is used. Anwenders profitieren von saubereren Bohrlöchern und einer längeren Standzeit des Werkzeugs, da die Beschichtung Reibung und Verschleiß deutlich verringert. Short Design for Stable, Accurate Results Die kurze Ausführung des Bohrers minimiert die überstehende Auskraglänge und erhöht so die Stabilität beim Bohren; das reduziert Vibrationen und verbessert den Rundlauf. Dadurch sind präzise Bohrungen in harten Materialien möglich. Zudem ermöglicht die geschliffene Ausführung ein bis zu 40 % schnelleres Bohren und benötigt dabei bis zu 50 % weniger Anpresskraft, was das Arbeiten mit stationären oder leichten mobilen Maschinen deutlich erleichtert. Ideal für anspruchsvolle Metallanwendungen Dieser Twist Drill ist speziell für das Bearbeiten von Metallen ausgelegt und eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze sowie Hartkunststoff. Die Ausführung nach DIN 338 signalisiert, dass es sich um einen kurz konstruierten Spiralbohrer mit Zylinderschaft handelt, wie er für Dreh- und Bohrmaschinen typisch ist. Nutzer erhalten ein Werkzeug, das für robuste Materialklassen konzipiert ist und wiederholbar präzise Ergebnisse liefert. Practical Tips for Best Performance Für bestmögliche Ergebnisse beim Einsatz des Twist Drill empfiehlt sich die Verwendung von Kühlschmierstoff, insbesondere bei der Bearbeitung von Stahl und Guss, um Hitzeentwicklung und Werkzeugverschleiß zu minimieren. Die 118° tip sorgt für einfaches Zentrieren auf flachen oder leicht gewölbten Oberflächen; bei sehr harten Werkstoffen kann ein kleinerer Spitzenwinkel nötig sein. Verwenden Sie geeignete Drehzahlen und Bohrwerte entsprechend Werkstoff und Durchmesser, um Bruchgefahr zu reduzieren und die Standzeit zu maximieren. MetavCUT recommends this Twist Drill for precise metalworking; for expert advice or additional technical data please contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications Twist Drill Marke: MetavCUT SKU: 28030-FDA Diameter: 3 mm Overall Length: 61 mm Spiral (Flute) Length: 33 mm Tip Angle: 118° Execution: Short Shank Finish: Fully ground Coating/Colour: TiN-coated Material: HSS-G Standard: DIN 338 Suitable for: Drilling Machine, Metalworking Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill from MetavCUT is mainly applied when machining high‑strength materials and larger diameters; its short, robust form is easier to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which 3 drill types exist? Commonly distinguished drill types are: Metal drill, Wood drill, Masonry/Concrete drill.
3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short, 3 mm, 135° tip, TIN-coated, HSS‑G, DIN 338 A Twist Drill (Type N) from MetavCUT for precise metal drilling with a short design suited to drilling machines. Short design for improved stability TIN-coated for extended tool life 135° tip angle for hard metals Fully ground HSS‑G for precise holes Conforms to DIN 338 for short twist drills Precision and durability that improve metalworking results The MetavCUT Twist Drill combines a 3 mm diameter with a 135° tip angle and a short overall length to deliver high precision when machining hard materials. The HSS‑G material and fully ground flute geometry enable sharp cutting edges and consistent concentricity, which produce cleaner holes and reduce wobble. This design reduces required feed forces and supports stable drilling on both stationary and portable drilling machines, making it well suited for professional metalworking tasks. Short length for greater stability and accuracy A shorter working length reduces overhang and thus vibration, which directly improves hole quality in demanding operations. The short configuration of this Type N twist drill increases stiffness and lowers the risk of deflection when drilling alloys, cast iron or tempered steels. For operators, this means fewer rejected parts and less rework, especially when precise hole position and diameter tolerance are critical in assemblies and components. Coating and material explained — longer lifetime under load The TiN coating (TIN‑coated) provides a hard, low-friction surface that reduces wear and heat buildup during metal cutting. When combined with HSS‑G construction, the coating extends tool life and maintains sharpness, especially under intermittent cooling or light lubrication. For users unfamiliar with the term, HSS‑G refers to high‑speed steel that has been ground (G) to produce very sharp cutting edges and high concentric accuracy, which is particularly beneficial for drilling small diameters such as 3 mm. Application advice and practical use cases This short Type N twist drill is designed primarily for metal: alloyed and unalloyed steel, cast iron, sintered metals, copper, bronze and hard plastics. The 135° tip angle shortens the initial penetration time for harder materials and improves centring. Use with appropriate coolant or cutting fluid for best wear performance, and prefer steady clamping and minimal overhang to exploit the stability advantages of the short design. For handheld drilling machines, ensure the chuck grip is secure and use steady feed to avoid breakage. Who benefits most from this tool Engineers, machinists and maintenance technicians who require repeatable, precise holes in metal parts will find the short Twist Drill especially valuable. The combination of fully ground geometry and TiN coating supports applications where hole quality matters — toolrooms, small-batch fabrication and repair workshops. The tool is also suitable for use in production where short, accurate drill cycles reduce scrap and improve throughput. Strongly recommended: choose the MetavCUT Twist Drill Type N for demanding metal drilling tasks thanks to its short, stable design and TiN coating — for personal technical advice or further specifications contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 46030-FDA Diameter: 3 mm Overall length: 61 mm Spiral length: 33 mm Tip angle: 135° Type: Type N Material: HSS‑G Coating/Colour: TIN-coated Shank execution: fully ground Execution: short Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill from MetavCUT, Type N, is primarily used for machining high‑strength materials and larger bore diameters. The geometry of this short, fully ground HSS‑G drill allows relatively easy regrinding and withstands higher mechanical loads, making it suitable for demanding metalworking operations where durability and sharpness are required. Which three drill types are there? When selecting drills, the main categories are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill (Type N) falls into the Metal drills category and is optimised for steel, cast iron and other non‑ferrous metals.
3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Profitieren Sie von der Kombination aus HSS-G-Qualität, TiN-Beschichtung und kurzer Ausführung für präzise Metallbohrungen; die geschliffene Geometrie reduziert Anpresskraft und erhöht die Standzeit. Bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 3 mm | MetavCUT Profi Line (kurz, HSS‑G) Der Spiralbohrer in kurzer Ausführung für präzise Metallbohrungen an Hand- und stationären Maschinen. Kurze Ausführung für höhere Stabilität TiN-Beschichtung für längere Standzeit HSS‑G geschliffen für präzise Bohrlöcher 135° Spitzenwinkel für harte Werkstoffe DIN 338, Zylinderschaft für Maschinenbetrieb Mehr Standzeit durch Material und Beschichtung Dank der HSS‑G-Werkstoffwahl und der TiN-Beschichtung profitieren Anwender von erhöhter Verschleißfestigkeit und reduzierter Reibung beim Bohren von Metall. Die Beschichtung verringert Wärmeentwicklung und erleichtert Spanabfuhr, wodurch sich die Lebensdauer des Werkzeugs messbar erhöht. Dies ist besonders relevant bei häufigen Serienarbeiten oder bei Bohrungen in legierten Stählen, weil sich die Gesamtbetriebskosten dadurch verringern und weniger Werkzeugwechsel nötig werden. Fachbegriffe wie HSS‑G (geschliffen) und TiN (Titan‑Nitrid) stehen damit für greifbare Vorteile in der Werkstatt. Stabilität und Präzision bei Metallarbeiten Die kurze Auskraglänge reduziert Vibrationen und Verwindung, sodass die Bohrung sauberer und geradliniger wird. Durch die geschliffene Schaft‑ und Spiralengeometrie entsteht eine hohe Rundlaufgenauigkeit, was besonders bei anspruchsvollen Bohrungen in Gusseisen und gehärteten Materialien wichtig ist. Die Kombination aus kurzer Bauform und Stabilität sorgt dafür, dass deutlich weniger Nacharbeit anfällt und die Bohrung schneller ins Maß gebracht werden kann. Geeignete Anwendungen und Maschinen Typische Einsätze liegen im Standard‑Bereich für Metallbohrer: Werkstatt, Montage und DIY‑Projekte sowie stationäre Säulenbohrmaschinen und Handbohrmaschinen. Dieses Werkzeug ist speziell für das Bohren in legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetallen wie Kupfer und Bronze geeignet. Für das Durchführen sauberer Bohrungen an Handmaschinen empfiehlt sich dennoch sorgfältiges Anpunkten, um ein „Wandern“ beim Anbohren zu vermeiden und die Genauigkeit zu steigern. Praxistipps für lange Nutzungsdauer und sichere Ergebnisse Für optimale Ergebnisse empfiehlt sich der Einsatz von Kühlmittel bei Stahlbearbeitung, moderater Vorschub und angepasste Drehzahlen. Der 135° Spitzenwinkel reduziert das Auflaufen auf harten Oberflächen und erleichtert das Anbohren bei zähen Werkstoffen. Bei sehr präzisen Passungen hilft ein kurzes Vorbohren mit Zentrierbohrer. Bei stationärem Einsatz erhöht sich die Zuverlässigkeit weiter, weil die Sprödigkeit geschliffener Bohrer durch bessere Kühlung und stabile Aufnahme kompensiert wird. Bestellen Sie den MetavCUT Profi Line Spiralbohrer für präzise Metallbearbeitung direkt über Metav und lassen Sie sich bei technischen Fragen persönlich beraten unter info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 41030-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Ausführung: kurz Daten Durchmesser: 3 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (geschliffen) Farbe: TIN‑beschichtet (Titan‑Nitrid) Schaftausführung: geschliffen Norm: DIN 338 Typ: Typ N Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall Verpackungseinheit: 10 FAQ Für welche Werkstoffe ist dieser Bohrer geeignet? Der MetavCUT Profi Line Spiralbohrer (Typ N, SKU 41030-FDA) eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer, Bronze und Neusilber; bei Hartkunststoff sind ebenfalls gute Ergebnisse möglich. Kann ich den Bohrer mit einer Handbohrmaschine verwenden? Ja, der Spiralbohrer von MetavCUT (Profi Line, SKU 41030-FDA) ist für Handbohrmaschinen geeignet; wegen der kurzen Ausführung empfiehlt sich jedoch sauberes Anpunkten für höhere Präzision. Wie verlängere ich die Standzeit des Bohrers? Wählen Sie passende Drehzahl, moderaten Vorschub und eine Kühlmittelzufuhr; die TiN‑Beschichtung des MetavCUT Profi Line Spiralbohrers (41030-FDA) reduziert Reibung und trägt so zur längeren Standzeit bei. Was bedeutet die DIN 338 Kennzeichnung für dieses Produkt? Die Norm DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft; der MetavCUT Profi Line Spiralbohrer (Typ N, SKU 41030-FDA) erfüllt diese Klassifikation und steht damit für definierte Abmessungen und Fertigungsqualität. Worin unterscheidet sich ein geschliffener HSS‑Bohrer von einem gewalzten? Geschliffene HSS‑Bohrer wie der MetavCUT Profi Line (41030-FDA) bieten schärfere Schneiden und höhere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; sie sind jedoch empfindlicher und profitieren von stationärer Aufnahme und Kühlung.
3mm HSS-G Twist Drill DIN 338 - MetavCUT
Der Spiralbohrer überzeugt durch seine Kombination aus schneller Spanabfuhr und hoher Anbohrstabilität; die HSS‑G-Ausführung und der 135° Spitzenwinkel reduzieren Anpresskraft und ermöglichen effiziente, gratfreie Bohrungen in Stahl und Gusseisen. Nutzen Sie die Präzision und Robustheit für produktive Metallbearbeitung und bestellen Sie direkt über Metav oder kontaktieren Sie unsere Beratung bei Bedarf. Spiralbohrer (HSS‑G) von MetavCUT Der Spiralbohrer ist ein geschliffener HSS‑G Kurzspiralbohrer nach DIN 338 für präzise Metallbohrungen an Handbohrmaschinen und stationären Werkzeugmaschinen. HSS‑G für hohe Verschleißfestigkeit 135° Spitzenwinkel für härtere Werkstoffe Bis zu 40 % schnellere Bohrleistung Geeignet für Handbohrmaschine und stationäre Maschinen Norm DIN 338, kurze Spiralbohrer Schnelleres Bohren mit weniger Anpresskraft für effiziente Abläufe Dank der speziell geschliffenen Schneide ermöglicht der Bohrer einen deutlich schnelleren Bohrfortschritt bei reduziertem Kraftaufwand. Dieses Merkmal sorgt für geringere Ermüdung der Maschine und längere Standzeiten der Werkzeuge, was die Effizienz in Werkstatt und Produktion steigert. Anwender profitieren von saubereren Lochrändern und kürzeren Bearbeitungszeiten bei dünnen bis mittleren Blechen und Profilen. Präzision beim Anbohren und saubere Lochränder für hochwertige Ergebnisse Die W‑Spitze und der definierte Spitzenwinkel reduzieren das Wandern beim Anbohren und führen zu gratarmen Ergebnissen. Dadurch werden Nacharbeit und Entgraten minimiert, was besonders bei nachfolgenden Passungen und Montageprozessen Zeit spart. Diese Eigenschaft ist besonders vorteilhaft beim Bohren in legierten und unlegierten Stählen sowie in Gusseisen. Vielseitigkeit in der Materialbearbeitung und robustes Design Als Kurzspiralbohrer nach DIN 338 ist dieses Werkzeug für eine breite Palette von Materialien geeignet: Stahl, Gusseisen, Aluminium, Buntmetalle und technische Kunststoffe. Die HSS‑G-Legierung bietet eine gute Balance aus Zähigkeit und Verschleißfestigkeit, wodurch der Bohrer sowohl für einfache Werkstattaufgaben als auch für anspruchsvollere Montagearbeiten geeignet ist. Anwendungsempfehlung und Maschinenkompatibilität für sichere Prozesse Für handgeführte Akkubohrschrauber und stationäre Säulenbohrmaschinen liefert der Bohrer zuverlässige Ergebnisse. Bei einem Durchmesser von 3 mm empfiehlt sich bei Bedarf das Anpunkten mit einem Zentrierbohrer zur Erhöhung der Rundlaufgenauigkeit. So werden Verkantungen vermieden und die Standzeit weiter erhöht. Profitieren Sie von schnellerem Bohren mit dem HSS‑G Bohrer von MetavCUT – Beratung und Bestellung über Metav: info@metav-werkzeuge.com · Tel. +49 2822 7131930 · WhatsApp +49 170 2837271 Produkteigenschaften Artikelnummer: 55030-FDA Marke: MetavCUT Serie: Spezial Bezeichnung: Spiralbohrer Norm: DIN 338 Fakten Durchmesser: 3 mm Gesamtlänge: 61 mm Spirallänge: 33 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (Schnellarbeitsstahl, geschliffen) Schaft Ausführung: mit W‑Spitze, ohne 3‑Kantschaft Anwendung: Bohrer für Metall Geeignet für: Handbohrmaschine, stationäre Maschinen FAQ Ist der Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS‑G und mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe; bei rostfreiem Stahl kann die Standzeit geringer sein als bei speziellen HSS‑Co Typen. Welche Maschine passt am besten zu diesem Bohrer? Für den 3 mm Bohrer empfiehlt sich die Nutzung an einer Handbohrmaschine oder einer stationären Säulenbohrmaschine; die Ausführung entspricht DIN 338 für kurze Spiralbohrer. Wie erhöht man die Präzision beim Anbohren? Punktieren mit einem Zentrierbohrer und stabile Spannmittel reduzieren Wandern; der geschliffene Bohrerspitzenwinkel unterstützt ein sauberes Anbohren. Woraus besteht der Bohrer und was bedeutet das für die Anwendung? Der Bohrer besteht aus HSS‑G, was eine gute Kombination aus Zähigkeit und Verschleißfestigkeit bietet und ihn für Stahl, Gusseisen und Nichteisenmetalle geeignet macht. Welche SKU hat dieses Produkt für Nachbestellungen? Die Artikelnummer lautet 55030-FDA; Bestellungen und technische Rückfragen können über Metav oder direkt per E‑Mail an info@metav-werkzeuge.com gestellt werden.
3mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G Twist Drill, 3 mm, 135° point, Bright Finished, Fully Ground, DIN 340 The Twist Drill long HSS‑G is a precision drill for metalworking, designed for deep holes and use with a Drilling Machine. Long design for deeper or hard-to-reach holes 3 mm Diameter for precise pilot holes 135° Point angle for harder materials Fully ground shank for high concentricity Conforms to DIN 340 for industrial applications High‑performance material for demanding metalwork The Twist Drill uses HSS‑G (high‑speed steel, ground) to combine cutting performance with durability when machining tough metals. This material allows up to 40% faster drilling compared with conventional HSS in many applications and typically requires less feed force, which reduces operator strain and wear on the machine. The 135° point angle is optimised for harder materials such as stainless steel, shortening initial plunge time and improving centring on difficult surfaces. Long execution for deep bores and restricted access The long execution follows DIN 340 dimensions, providing extra overall length and extended spiral length for deep holes or recessed drilling positions. The extended geometry is ideal when the bore is set back from the workpiece edge or when using jigs that limit accessibility. Because the flute geometry is fully ground, concentricity and hole quality are improved, producing clean, precise bores suitable for finishing or reaming. Optimised geometry and handling recommendations A fully ground flute geometry delivers sharp cutting edges and excellent roundness, which benefits accuracy in demanding metalworking tasks. Operators should note that ground HSS drills can be more brittle than rolled types and therefore are best used with steady machine support and adequate cooling for long runs. Re‑sharpening restores edge geometry; therefore the tool can be maintained economically in a workshop environment. Intended users and typical applications This Twist Drill is aimed at professional workshops, toolrooms and industrial users who require reliable performance when drilling in legied and unlegied steels, cast irons and non‑ferrous metals. It is suitable for use in a Drilling Machine and for stationary applications where high concentricity and hole quality are priorities. For occasional handheld use, ensure the drill is clamped securely and run at appropriate speeds with coolant. We recommend the MetavCUT Twist Drill for deep metal drilling — for expert guidance and to confirm suitability for your application contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical details Designation: Twist Drill Brand: MetavCUT SKU: 53030-FDA Diameter: 3 mm Point angle: 135° Execution: long Finish/Colour: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 340 Spiral length: 66 mm Total length: 100 mm For use with: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for and which materials suit it best? The Twist Drill from MetavCUT (Twist Drill) is primarily applied to machining high‑strength materials and larger bore diameters; it performs well in alloyed and unalloyed steel, cast iron varieties and non‑ferrous metals, offering robust cutting action for demanding metalwork. Is the MetavCUT Twist Drill suitable for deep holes and recessed bores? Yes, the Twist Drill by MetavCUT is a long execution conforming to DIN 340, designed for deeper bores and situations where the drill must reach further into the workpiece than a standard length would allow. What are Twist Drills mainly used for? Twist Drills are mainly used when machining high‑strength materials and larger diameters; their form is easy to grind and they withstand higher loads. Which three drill types exist? The three principal drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the chisel edge at the tip of the Twist Drill, significantly lowering friction and therefore feed forces, while improving the drill’s ability to centre in the workpiece. Can metal Twist Drills be used for drilling wood? Metal drills can be used in wood but offer inferior guidance and a less clean finish; they are easier to re‑grind and have a reduced self‑feeding tendency compared with wood‑specific drills. For which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is often executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The general view that HSSE steels are categorically superior to standard HSS is incorrect; assess working conditions carefully to decide whether the higher cost of HSSE is justified for your application.
3mm NC Spot Drill HSS-Co 120° With Cylindrical Shank DIN 1835-A, Right-Hand Cutting - TECWERK
Take advantage of HSS‑Co strength and a DIN 1835‑A cylindrical shank for reliable, repeatable spotting and chamfering. The tool’s combination of position‑accurate centring and a proven feed recommendation (0.03 mm/rev in steel up to 800 N) reduces setup time and increases first‑pass quality — order directly via Metav Werkzeuge or contact our team for compatibility advice. TECWERK NC spot drill — 3 mm, HSS‑Co, 120° tip The TECWERK NC spotting drill (3 mm) is a purpose‑built centreing and chamfering tool for position‑accurate pre‑drilling on NC machines and drilling centres, ideal for preparing threaded holes in a single pass HSS‑Co grade for increased wear resistance Cylindrical shank to DIN 1835‑A Position‑accurate spot drilling and chamfering Optimised feed: 0.03 mm/rev in steel up to 800 N Reliable centreing to improve thread quality The combination of a 120° tip and the HSS‑Co material creates a stable initial bore that reduces run‑out and misalignment when tapping follows. This stability is particularly valuable when producing threaded holes where concentricity matters; a correct initial spot ensures the subsequent thread form is created evenly, reducing rejects and rework. The geometry is right‑hand cutting and designed to produce a clean centring mark that supports consistent tap engagement. Consistent performance under production conditions Constructed from HSS‑Co, the tool is intended for higher mechanical and thermal stress than standard high‑speed steels, which leads to longer life in repetitive NC operations. The specified feed guidance — 0.03 mm/rev in steel up to 800 N — gives a practical starting point for process parameterisation, helping to achieve reliable chip formation and surface finish. Using these parameters, cycle times can be standardised across batches, improving predictability on the shop floor. Fast integration into existing tool setups The DIN 1835‑A cylindrical shank ensures straightforward clamping in common collets and tool holders used on NC machines and drill rigs, allowing quick tool changes and minimal retrofitting. Because centring and chamfering are combined in one operation, fixture time and handling are reduced, which is especially beneficial for medium‑volume production or mixed‑batch work. The tool’s compatibility with standard tool holding systems makes it an efficient choice for retrofit or green‑field installations. Designed for workshop and production use This spotting drill is suitable for manufacturers and job shops that demand repeatable hole starts and efficient downstream tapping. The right‑hand cutting action delivers predictable chip flow, while the compact 3 mm diameter supports fine feature work without excessive material removal. Operators gain confidence from a tool that produces consistent results: fewer broken taps, reduced scrap rates and a steadier production rhythm — practical benefits that contribute directly to process reliability. For production environments requiring repeatable, position‑accurate spotting and chamfering, contact Metav Werkzeuge to order the TECWERK NC spot drill or to discuss integration with existing NC machinery Technical data Article number: 2000860083NW Label: NC‑Anbohrer D.3mm HSS‑Co 120Grad TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Diameter: 3 mm Tip angle: 120° Recommended feed in steel up to 800 N: 0.03 mm/rev Special features Material: HSS‑Co Shank: cylindrical shank to DIN 1835‑A Cutting direction: right‑hand cutting Application: position‑accurate spotting on NC machines and drilling machines Function: centring and chamfering of tapped holes in one pass FAQ How does this tool improve threaded hole preparation? The TECWERK NC spot drill creates a precise centring point and clean chamfer, which improves tap alignment and reduces the chance of tap breakage during thread cutting. Is the shank compatible with standard holders on milling and drilling machines? Yes, the cylindrical shank conforms to DIN 1835‑A, so it is compatible with common collets and holders used on NC machines and drilling centres. What machining parameters are suggested for steel? A practical feed guideline is 0.03 mm/rev in steel up to 800 N, as stated for the tool; this supports stable chip formation and repeatable results. Can the tool be used for fine‑feature work with small diameters? The 3 mm diameter and the tool’s geometry are suitable for small‑bore preparation where accurate centring and minimal material removal are required. Which material is the tool made from and what benefit does it provide? The spotting drill is produced from HSS‑Co, offering improved wear resistance and thermal stability for repeated NC use. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3mm NC Spot Drill HSS-Co 90° With Cylindrical Shank DIN 1835-A, Right-Hand Cutting - TECWERK
Take advantage of precise positioning and faster cycle times thanks to the combination of cobalt HSS material and a 90° point that centres and chamfers in one pass; benefit from secure clamping via the DIN 1835‑A cylindrical shank and straightforward integration into CNC processes. Order the (NC spot drill D 3 mm HSS‑Co 90°) directly via (Metav Werkzeuge) or ask our consultants if needed. NC spot drill D 3 mm – HSS‑Co spot/centre drill, 90° point (TECWERK) The NC spot drill D 3 mm is a cobalt high‑speed steel spot drill with a DIN 1835‑A cylindrical shank, designed for precise positioning and rapid centring on CNC machines and drilling rigs. Cobalt HSS for enhanced wear resistance 3 mm diameter for fine positioning 90° point for fast centring and chamfering DIN 1835‑A cylindrical shank for secure clamping Faster, more reliable centring that reduces rework The tool’s 90° point and 3 mm cutting diameter provide a compact contact zone that stabilises initial drilling and prevents wander during the first cut. Manufactured from HSS‑Co, the tip offers improved wear resistance compared with standard high‑speed steel, which translates into longer service intervals and fewer rejects. Because the tool is designed for NC machines, the combined centring and chamfering action reduces handling steps and eliminates a separate chamfering operation, improving overall throughput while maintaining hole quality. Secure clamping and straightforward integration on production equipment A DIN 1835‑A cylindrical shank ensures consistent seating in standard toolholders and collets, reducing run‑out and vibration in automated spindles. The geometry is right‑hand cutting, compatible with conventional spindle directions, and the robust shank profile supports repeatable positioning across series production. As a result, the insert operation becomes more predictable and maintenance intervals extend, supporting a leaner production flow and reduced setup time for recurring batches. Clear machining data for process planning and tool selection The tool is optimised for controlled feeds: for steels up to a cutting force of 800 N the recommended feed is 0.03 mm/rev, which balances chip formation and surface finish for the initial spot and chamfer. Using this parameter helps maintain the integrity of the hole entry and reduces burr formation ahead of subsequent threading operations. The compact form and material selection make this tool a practical choice where precise hole location, quick cycle times and tool life are priorities in a high‑mix, automated environment. For procurement or technical consultation on the NC spot drill D 3 mm HSS‑Co 90° (SKU 2000860103NW), contact Metav Werkzeuge in Emmerich for availability and process advice Technical data Article number: 2000860103NW Product: NC spot drill D 3 mm HSS‑Co 90° Manufacturer: TECWERK Packaging unit: 1 Facts Diameter: 3 mm Point angle: 90° Recommended feed in steel ≤ 800 N: 0.03 mm/rev Special features Material: HSS‑Co Shank: DIN 1835‑A cylindrical shank Cutting direction: right‑hand cutting Application: positioning, centring and chamfering on NC machines and drilling rigs FAQ Can this tool be used on CNC machines and drilling rigs? Yes. The NC spot drill D 3 mm is specifically designed for NC machines and drilling rigs to provide accurate initial positioning and quick centring. What shank standard does the tool use? The tool features a DIN 1835‑A cylindrical shank for secure clamping in standard collets and toolholders. Which materials is the tool intended for? The TECWERK NC spot drill D 3 mm is intended for use on steel, with a recommended feed of 0.03 mm/rev at cutting forces up to 800 N for initial spotting and chamfering. Does the drill chamfer threaded holes in a single pass? Yes. The 90° point geometry is designed to centre and chamfer threaded holes in one operation, reducing process steps. What is the SKU for ordering and reference? The SKU is 2000860103NW; the product is the NC spot drill D 3 mm HSS‑Co 90° by TECWERK. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3mm NC Spot Drill HSS-Co TiN 90° With Cylindrical Shank DIN 1835-A, Right-Hand Cutting - TECWERK
Take advantage of the combination of HSS‑Co cutting material, TiN coating and a 90° point for reliable, repeatable centre drilling; the DIN 1835‑A cylindrical shank ensures secure clamping for unattended NC operation. Order directly via Metav Werkzeuge or consult the Metav team for application-specific advice. NC Centre Drill D 3 mm HSS‑Co TiN 90° – Centre drill for NC machines by TECWERK The NC Centre Drill D 3 mm HSS‑Co TiN 90° is designed for precise centring and chamfering on NC machines and drilling centres, combining fast positioning with abrasion resistance HSS‑Co for high wear resistance TiN coating for extended tool life 90° point for precise centring Cylindrical shank DIN 1835‑A for secure clamping Consistent precision for automated production The combination of HSS‑Co substrate and a TiN coating provides a balance between hardness and toughness, resulting in steady performance under repetitive cycles. In practice, this means fewer tool changes and more consistent hole starts during batch runs on automated equipment. The 90° geometry produces clean centre points that reduce runout and rework, while the right‑hand cutting geometry delivers predictable chip evacuation and tool behaviour during high‑volume machining. Two operations in one: centring and chamfering A single operation for centring and chamfering shortens cycle time and minimises handling between stations. The 90° point creates the accurate entry needed for subsequent thread tapping, and the integrated chamfer reduces burr formation at the hole rim. Together, these features support faster set‑ups on production lines and decrease the risk of misalignment when preparing holes for threading or downstream assembly. Designed for NC machines and drilling centres The tool’s cylindrical shank to DIN 1835‑A makes it compatible with standard chucks and holders, ensuring secure clamping during automated runs. The stated feed capability — 0.03 mm/rev in steel up to 800 N — offers guidance for stable cutting parameters and helps process planners select appropriate feeds for consistent results. Right‑hand cutting and robust geometry support reliable performance across a range of machine speeds common in NC applications. Easy specification and process integration Specification is straightforward: the tool is optimised for centre drilling tasks where positional accuracy and repeatability are priorities. The combined material and coating reduce built‑up edge and extend time between inspections, while the standardised shank simplifies toolchanger programming. For workshops aiming to increase throughput without complex tool strategies, this option offers a pragmatic way to improve first‑pass hole quality. Contact Metav Werkzeuge for tailored application advice or to arrange supply from our Emmerich facility — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 2000861383NW Label: NC‑Anbohrer D.3mm HSS‑Co TiN 90Grad TECWERK Manufacturer: TECWERK Facts Diameter: 3 mm Point angle: 90° Feed in steel up to 800 N: 0.03 mm/rev Packaging unit: 1 Special features HSS‑Co material TiN coating Cylindrical shank to DIN 1835‑A Right‑hand cutting For NC machines and drilling centres Centres and chamfers thread holes in one operation FAQ What materials can this centre drill be used on? The NC Centre Drill D 3 mm HSS‑Co TiN 90° is specified for steel applications (feed guidance: 0.03 mm/rev at up to 800 N); the HSS‑Co substrate and TiN coating support wear resistance during repetitive steel machining. Is the shank compatible with standard toolholders? Yes, the tool uses a cylindrical shank to DIN 1835‑A, which fits common chucks and toolholders used on NC machines and drilling centres. How does the TiN coating affect performance? The TiN coating reduces friction and delays wear, extending cutting life and improving surface finish consistency for the centre drilling operation. Can this drill perform chamfering for thread preparation? The 90° point and geometry allow centring and chamfering in a single pass, helping to prepare holes for threading and to reduce manual deburring steps. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3mm NC Spot Drill Solid Carbide TiAlN Coated 142° Point, Cylindrical Shank DIN 6535-HA - TECWERK
Take advantage of precise centring, a TiAlN-coated solid carbide tip and a DIN 6535-HA cylindrical shank for fast, repeatable spot drilling on CNC equipment; order the tool directly via Metav Werkzeuge or contact the consultants for application guidance. NC centre drill D 3 mm, solid carbide, TiAlN coating – TECWERK A NC centre drill D 3 mm designed for positional, fast spot drilling and for combined centring and chamfering on NC machines and boring mills Solid carbide with TiAlN coating 142° point angle for quick centring DIN 6535-HA cylindrical shank Boosted process speed with reliable centring The centre drill delivers a clear production advantage by combining a 142° point angle with a right-hand cutting geometry that reduces wobble during the initial contact. The TiAlN coating ensures higher surface hardness and improved heat resistance, so the tool maintains its edge when used for rapid positional drilling on NC machines and boring mills. With a predefined feed in steel up to 800 N: 0.05 mm/rev, the design supports consistent chip formation and repeatable hole starts, which translates into fewer rejects and more predictable cycle times. Material versatility and coating benefits explained Made from solid carbide, the drill is optimised for demanding materials: high-strength steels, cast steel, grey cast iron, stainless steels and a range of non‑ferrous metals. The TiAlN coating provides oxidation resistance at higher temperatures and extends tool life where conventional coatings would fail. For shops that machine mixed batches, this combination reduces tool changes and keeps set‑ups lean. The result is greater uptime and a more economical machining flow without compromising hole quality. Integration with machines and downstream tooling The cylindrical shank conforms to DIN 6535‑HA, allowing secure clamping in standard toolholders and quick integration into existing tool libraries. It also serves as a reliable pilot for solid carbide drills with point angles between 120° and 140°, enabling accurate centring before drilling operations. This compatibility reduces setup complexity and ensures alignment between the centre drill and subsequent drills, improving thread starts and reducing rework. Practical application and handling recommendations The tool is intended for positional spot drilling and for centring plus chamfering of tapped holes in a single pass, which streamlines workflows in production and maintenance settings. The right-hand cutting direction and recommended feed value help to avoid burr formation while achieving clean chamfers. For best results, verify clamping rigidity and use coolant appropriate to the workpiece material; the coated carbide geometry tolerates elevated cutting temperatures but benefits from adequate chip evacuation. For tailored advice on integrating the TECWERK NC centre drill into production, contact Metav Werkzeuge in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com for fast, reliable supply and application guidance. Technical data Article number: 2000865837NW Name: NC centre drill D 3 mm, solid carbide, TiAlN coating Manufacturer: TECWERK Packaging unit: 1 Key figures Point angle: 142° Feed in steel up to 800 N: 0.05 mm/rev Shank standard: DIN 6535-HA Cutting direction: right-hand Features Coating: TiAlN Material: solid carbide Applications: high-strength steels; cast steel; grey cast iron; stainless steels; non‑ferrous metals Functions: positional spot drilling; centring and chamfering of tapped holes in one pass Compatibility: centres solid carbide drills with 120–140° point angle FAQ What materials can this centre drill machine? The TECWERK NC centre drill is suitable for high‑strength steels, cast steel, grey cast iron, stainless steels and non‑ferrous metals, thanks to its solid carbide substrate and TiAlN coating. Can the tool perform centring and chamfering in a single operation? Yes, the design enables combined centring and chamfering of tapped holes in one pass to reduce handling and cycle time. Which shank standard does the drill use for clamping? The tool uses a DIN 6535‑HA cylindrical shank for secure clamping in standard holders and straightforward integration into tool systems. What point angles can it centre for follow‑up drills? It is intended to centre solid carbide drills with point angles in the range of 120° to 140°, ensuring alignment for subsequent drilling operations. What feed is recommended for steel applications? The technical specification indicates a feed in steel up to 800 N of 0.05 mm/rev to achieve consistent chip formation and stable centring. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3mm Solid Carbide Spot Drill 90° For Precise NC Positioning And Countersinking, High Feed Capability - TECWERK
Take advantage of the combination of fast cycle times, precise centring and durable solid‑carbide construction for reliable series production. Order this tool directly via Metav Werkzeuge or consult the specialists for process optimisation. NC Spot Drill D 3 mm VHM 90° — solid‑carbide centre drill (TECWERK) A NC Spot Drill D 3 mm VHM 90° engineered for positions‑accurate and rapid spot drilling on NC machines and drill rigs, enabling centring and chamfering of threaded holes in a single pass. Solid carbide (VHM) for high wear resistance Cylindrical shank to DIN 6535‑HA 90° point for precise centring and chamfering Minimise setup time with one‑pass centring and chamfering The tool combines a sharply defined 90° point with a geometry optimised for quick, positions‑accurate entry on automated systems. This design allows centring and chamfering of a tapped hole within one operation, reducing cycle time and lowering fixture use. For production environments that prioritise throughput, the integrated process step translates directly into fewer tool changes and shorter non‑productive time. Durability and repeatable accuracy from solid carbide Constructed from solid carbide (VHM), the drill offers high rigidity and consistent cutting performance under load. Carbide construction improves edge retention and thermal stability, which supports repeatable hole quality over longer runs. The right‑hand cutting geometry ensures reliable chip formation, while the tool material reduces wear when machining tougher alloys, helping to maintain tight positional tolerances across batches. Machine compatibility and reliable feed guidance The cylindrical shank to DIN 6535‑HA ensures secure clamping in standard toolholders and spindle chucks on NC machines and drilling rigs. The specified feed guidance—0.05 mm/rev in steel up to 800 N—provides a practical baseline for process setup; selecting a matching spindle speed and feed consistent with machine rigidity keeps forces within recommended limits and preserves hole accuracy. The combination of shank standard and robust geometry simplifies integration into automated machining sequences. Broad material range for workshop and industrial use The tool is particularly suited to demanding materials including high‑strength steels, cast steel, grey cast iron, stainless steels and non‑ferrous metals. The geometry supports clean centring in brittle and ductile materials alike, while carbide resilience helps when intermittent contact with hard inclusions occurs. This makes the drill a practical choice for production shops, maintenance departments and drill centres looking to standardise a single process‑capable centre drill across multiple materials. Contact Metav Werkzeuge for application advice and availability from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: 2000865801NW Name: NC Spot Drill D 3 mm VHM 90° Manufacturer: TECWERK Packaging unit: 1 Numbers Diameter: 3 mm Point angle: 90° Recommended feed in steel up to 800 N: 0.05 mm/rev Special features Solid carbide (VHM) Cylindrical shank to DIN 6535‑HA Right‑hand cutting For positions‑accurate and rapid spot drilling on NC machines and drill rigs Centres and chamfers threaded holes in one pass Suitable for high‑strength steels, cast steel, grey cast iron, stainless steels and non‑ferrous metals FAQ What is the intended use for this centre drill? The NC spot drill is intended for positions‑accurate spot drilling on NC machines and drill rigs, providing centring and chamfering of threaded holes in a single operation. Which materials can be machined with this tool? The tool is suitable for high‑strength steels, cast steel, grey cast iron, stainless steels and non‑ferrous metals, thanks to its solid‑carbide construction and robust geometry. How should feed and speed be set? A practical reference is a feed of 0.05 mm/rev in steel up to 800 N; final spindle speed and feed should match machine rigidity and material specifics. Is the shank compatible with standard holders? Yes. The cylindrical shank complies with DIN 6535‑HA, allowing secure clamping in standard toolholders and chucks. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3mm Solid Carbide Spot Drill TiAlN 90° Compact Shank DIN 6535-HA, Right-Hand - TECWERK
The combination of solid carbide construction and a TiAlN coating delivers extended tool life and consistent centre accuracy, enabling shorter cycle times and fewer re‑setups; order the NC spot drill directly via Metav Werkzeuge or consult the technical team for application-specific guidance. NC spot drill D.3 mm solid carbide TiAlN 90° – TECWERK spot drill for CNC machines A NC spot drill D.3 mm solid carbide TiAlN 90° designed for position‑accurate spot drilling, centring and countersinking on CNC machines and boring mills. Solid carbide construction for high rigidity TiAlN coating for increased tool life Cylindrical shank to DIN 6535-HA 90° point for precise centring and countersink Suitable for high-strength and stainless steels Faster production through durable solid carbide design The solid carbide build combined with a TiAlN surface finish provides superior wear resistance and thermal stability compared with coated high‑speed steels. This results in reduced tool changes and more predictable tool life under repetitive NC operations, which supports continuous production runs. The specification includes a recommended feed in steel up to 800 N at 0.05 mm/rev, a parameter that guides commissioning and helps maintain consistent hole quality in serial machining. Reliable single‑pass centring and countersinking Featuring a 90° point, the tool enables centring and light countersinking in a single operation, reducing setup time and eliminating a separate countersink cycle. The geometry promotes immediate contact and secure location for subsequent drilling or tapping operations, improving hole alignment and thread start quality. This benefit is particularly relevant where positional accuracy and repeatability influence assembly fit and downstream process yield. Secure clamping and machine compatibility The cylindrical shank to DIN 6535-HA ensures secure retention in standard tool holders, minimising run‑out and vibration. Right‑hand cutting geometry offers conventional chip evacuation for a wide range of turning and milling configurations. Compatibility with standard CNC spindles and boring mills makes the tool easy to integrate into existing workflows, supporting both prototype and production environments without additional tooling investment. Designed for demanding materials and steady feeds Optimised for machining high‑strength steels, cast steels, grey cast iron, stainless steels and non‑ferrous metals, the drill provides stable performance where conventional centre drills may wear prematurely. The combination of carbide and coating is tailored to withstand elevated cutting temperatures, while the tool’s geometry supports position‑accurate and fast spot drilling operations that contribute to shorter cycle times and fewer rejected parts. Secure the TECWERK NC spot drill through Metav Werkzeuge for consistent centring and improved cycle time — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for precise application advice and order processing Technical data Article number: 2000865810NW SKU / UID: 2000865810NW Brand: TECWERK Packaging unit: 1 Core specifications Diameter: 3 mm Point angle: 90° Feed recommendation in steel up to 800 N: 0.05 mm/rev Materials and features Material: solid carbide Coating: TiAlN Shank: cylindrical shank to DIN 6535-HA Cutting direction: right‑hand cutting Application: high‑strength steels, cast steel, grey cast iron, stainless steels, non‑ferrous metals Intended use: position‑accurate spot drilling, centring and countersinking on CNC machines and boring mills FAQ What is the primary use of this spot drill? The TECWERK NC spot drill D.3 mm solid carbide TiAlN 90° is intended for position‑accurate spot drilling, centring and light countersinking on CNC machines and boring mills. Which materials are suitable for machining with this tool? This spot drill is suitable for high‑strength steels, cast steel, grey cast iron, stainless steels and various non‑ferrous metals according to the TECWERK specification. What clamping standard does the shank follow? The tool is supplied with a cylindrical shank to DIN 6535‑HA for secure clamping in standard holders. Are there recommended cutting parameters? A guidance value is given as feed in steel up to 800 N: 0.05 mm/rev; machining parameters should be adapted to machine rigidity and the specific workpiece material. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
4.1mm Double-Ended Twist Drill HSS Profile-Ground Short Spiral Cross-Point Cylindrical Shank - TECWERK
Benefit from a cost-effective, workshop-ready solution that combines HSS durability with a double-ended design and a split point for precise starts; order directly via Metav Werkzeuge or consult our experts for details. Double-ended 4.1 mm HSS bodywork twist drill – TECWERK The Double-ended 4.1 mm HSS bodywork twist drill is a purpose-built cutter for fast, clean drilling of thin metals and sheet work with hand-held drills. HSS construction for reliable durability Double-ended design for quick tool changes Split-point for precise, burr-reduced starts Short spiral ideal for thin sheet metal Faster, cleaner holes in thin materials Made from HSS, this twin-ended twist drill delivers consistent cutting performance when working with thin gauges. The 4.1 mm diameter and the split point geometry reduce walking at the start of the hole, so pilot marks or centre punches are needed less often. Short flute geometry ensures rapid chip ejection on delicate sheets, which lowers the risk of tearing and produces cleaner edges — a clear benefit for bodywork and panel fabrication where finish quality matters. Suited to hand-held drills and sheet metal tasks The tool features a cylindrical shank and right-hand cutting geometry designed for secure clamping and predictable chip flow when used in portable drilling machines. The short spiral limits grab and vibration in light-duty setups, improving control for manual operators. For everyday metal-joining and repair tasks, this configuration balances ease of use with the cutting behaviour expected from a specialised bodywork drill. Workshop efficiency through practical design The double-ended layout halves downtime for bit changes and reduces the number of individual items to manage in a busy workshop. The bit is profile-ground for consistent geometry and supplied in an uncoated finish suitable for general sheet-metal applications. Together, these aspects contribute to reliable repeatability and straightforward tool handling, supporting an efficient workflow without unnecessary complexity. Clear application scope and handling advice This bodywork twist drill is optimised for thin materials and sheet metal operations with hand drills and light machines; it is not specified for hardened or high-alloy steels. The HSS construction makes it robust for frequent use in repair and fabrication, while the split point decreases the need for elaborate fixturing on thin panels. For specific machine speeds, feed suggestions or alternative diameters, Metav Werkzeuge’s technical advisors can provide tailored guidance. For availability, packaging options and specific application advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will recommend the right TECWERK bodywork drill for the task. Technical data Article number: 2000860141NW Product: Double-ended 4.1 mm HSS bodywork twist drill Manufacturer: TECWERK Packaging unit: 10 Core data Diameter: 4.1 mm Material: HSS Shank: cylindrical Cutting direction: right-hand Point type: split point Spiral length: short Design: double-ended, profile-ground Finish: uncoated Special features Intended use: sheet metal / thin materials Best used with: hand-held drilling machines Geometry: cross/grind split point for reduced walking Application focus: bodywork and panel fabrication FAQ Is this drill suitable for drilling aluminium sheets? Yes. The Double-ended 4.1 mm HSS bodywork twist drill from TECWERK is suitable for aluminium and other thin non-hardened sheet materials; the short spiral aids chip evacuation. Can the bit be used in a drill press as well as a hand drill? The geometry and cylindrical shank allow use in both hand-held drills and light bench drills, though the design is optimised for manual, sheet-metal tasks. What does the split point achieve in practice? The split point reduces axial walking at drill start and produces more accurate hole positioning with less need for pilot holes when using the TECWERK bodywork drill. How does the double-ended design benefit the workshop? A double-ended configuration provides two working ends per item, reducing changeover time and inventory complexity while maintaining consistent cutting geometry. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
4.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — 4.1 mm, 118° Point Angle, Short HSS Drill by MetavCUT (Black, DIN 338) The Twist Drill Type N is a short High Speed Steel Metal Drill with a 4.1 mm Diameter and a 118° Point Angle, designed for precise work in Drilling Machines and handheld drilling applications. Short HSS design for improved stability Conforms to DIN 338 for short spiral drills 118° point for reliable centring on many metals Type N Normal Spiral for general metalworking Black finish with 75 mm overall length Exceptional Precision and Stability for Metalworking The short HSS construction of this Twist Drill provides higher stability and reduced tendency to bend compared with longer drills. With a 4.1 mm Diameter and a Spiral Length optimised to DIN 338, this geometry reduces run-out and vibration when used in a Drilling Machine or a Hand Drill, resulting in cleaner Holes and extended Tool Life. For professionals and hobbyists who demand repeatable accuracy, the compact form factor improves concentricity and simplifies alignment at the workpiece. Material Properties and What 118° Means for Your Work Made from HSS (High Speed Steel), this short Twist Drill resists heat and wear during standard metal drilling tasks. The 118° Point Angle offers a balanced penetration profile that eases centring on curved or mild surfaces and reduces walking on sheet materials, while still delivering efficient cutting in unalloyed and alloyed steels, cast iron, non-ferrous Metals and Plastics. The result is lower risk of Breakage on small diameters and reliable hole quality for through-drilling operations. Practical Applications and Who Benefits Most This Twist Drill Type N is intended primarily for drilling metal: workshops, maintenance departments and industrial users performing repair or fabrication tasks will appreciate the short design for confined setups. The tool suits both stationary and portable Drilling Machine use and is particularly effective when drilling diameters under typical hand-operated feed forces. Users seeking an uncomplicated, durable solution for everyday metalworking find this drill a practical choice. Why MetavCUT’s Short Twist Drill Stands Out Conforming to DIN 338, the short configuration of this Twist Drill emphasises precision and reduced deflection, which is crucial for repeatable results in production or repair work. The Type N Normal Spiral is a proven standard for general metal drilling and can be reground more easily than complex geometries. If you need tailored advice on whether the short HSS variant is the right solution for a specific material or machine, METAV Werkzeuge provides competent, detailed consultation to help you select the correct tool and operating parameters. Strongly recommend MetavCUT's short HSS Twist Drill Type N for precise metal drilling — for expert advice or technical questions contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 40041-FDA Diameter: 4.1 mm Point Angle: 118° Type: Type N Execution: Short Colour: Black Material: HSS Spiral Length: 43 mm Overall Length: 75 mm Application: Drills for metal For Drill Machine: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The Twist Drill (MetavCUT, Type N) is primarily applied to the machining of high-strength materials and larger drilling diameters in metalworking; its classic spiral form allows straightforward resharpening and reliable performance under higher loads. Which three drill types exist? Common drill categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill (Type N) belongs to the Metal Drill group and is optimised for steel and similar materials. Why are Twist Drills pointed (split-point or sharpened)? The tip geometry reduces the cross-cut at the drill point, which significantly lowers friction and the required feed force; the Twist Drill (MetavCUT, Type N) benefits from this by achieving better centring and easier penetration with reduced walking. Can the Twist Drill (MetavCUT, Type N) be used in wood? A Metal Drill such as the Twist Drill (MetavCUT, Type N) can be used in Wood, but guidance is inferior and the hole finish will be less clean compared with dedicated Wood Drills; however, these drills are easier to regrind and exhibit lower self-feeding tendencies. For which drilling depths is the Twist Drill mostly used? Solid through-holes are commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool, and the short variant offers higher stability for many workshop operations. What is better, HSS or HSSE? The assumption that HSSE is categorically superior to HSS is not always correct; when choosing between HSS and HSSE for the Twist Drill (MetavCUT, Type N), evaluate the working conditions carefully to determine whether the higher cost of HSSE is justified by the specific application.
4.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Profitieren Sie von der Kombination aus kurzer Ausführung für erhöhte Stabilität, HSS‑E mit 5% Kobaltlegierung für mehr Verschleißfestigkeit und dem 135° Spitzenwinkel für bessere Anbohrleistung in harten Werkstoffen; bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei Bedarf. Spiralbohrer 4,1 mm (HSS‑E) – MetavCUT Standard Line Der Spiralbohrer in kurzer Ausführung ist für präzise Metallbohrungen konzipiert und eignet sich besonders für legierten und unlegierten Stahl sowie für Gusseisen und Nichteisenmetalle. Kurze Ausführung für höhere Stabilität HSS‑E mit 5% Kobaltlegierung für längere Lebensdauer Geschliffene Schaftausführung für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für sicheres Anbohren harter Werkstoffe Geeignet für Handbohrmaschine und stationäre Bohrarbeiten Präzise Leistung für den Alltag in Werkstatt und Montage Die kurze Ausführung dieses Bohrers reduziert die Auskraglänge und minimiert damit Vibrationen sowie Verbiegen, was zu saubereren Bohrlöchern und höherer Maßhaltigkeit führt. Durch die Kombination aus geschliffener Geometrie und optimiertem Schneidwinkel entsteht eine sehr gute Rundlaufgenauigkeit, die sich in präzisen Ergebnissen bei Serien- und Einzelfertigung niederschlägt. Für Anwender bedeutet das weniger Nacharbeit und eine verlässlichere Prozessqualität. Materialkompetenz und Fertigungsverfahren für harten Einsatz Gefertigt aus HSS‑E (Schnellarbeitsstahl mit Kobalt) und mit 5% Kobaltlegierung, bietet dieser Bohrer verbesserte Warmfestigkeit und Zähigkeit gegenüber herkömmlichem HSS. Die geschliffene Herstellung sorgt für scharfe Schneiden und saubere Spanführung, was besonders beim Bohren in harten Werkstoffen wie Edelstahl oder legiertem Stahl von Vorteil ist. Die Einordnung nach DIN 338 bestätigt die Ausführung als kurzer Spiralbohrer mit Zylinderschaft. Praxiseinsatz, Maschinenkompatibilität und Verarbeitungshinweise Der Durchmesser von 4,1 mm liegt im Standard‑Bereich, somit eignet sich der Bohrer sowohl für Handgeführte Akkubohrschrauber als auch für stationäre Säulenbohrmaschinen. Im Vergleich zu langen Bohrern bietet die kurze Bauform deutlich bessere Stabilität; das verringert Bruchrisiken besonders bei kleinen Durchmessern. Für saubere Ergebnisse bei Metall empfiehlt sich der Einsatz von Kühlschmierstoff und moderatem Vorschub, Schraubfutter fest anziehen und Rundlauf prüfen. Handling, Vorsichtsmaßnahmen und Zielgruppe Für Anwender im Maschinenbau, in der Instandhaltung und im Handwerk ist dieser Bohrer eine wirtschaftliche Wahl, wenn es um zuverlässige Metallbearbeitung geht. Bei Bohrungen über das Fünffache des Durchmessers oder bei extrem zähen Werkstoffen sind abgestufte Vorgehensweisen zu wählen. Kleine Durchmesser wie 4,1 mm profitieren von hoher Drehzahl und kontrolliertem Vorschub; das reduziert Spanaufbau und verlängert die Lebensdauer des Werkzeugs. Setzen Sie auf die MetavCUT Standard Line und fordern Sie eine persönliche Beratung per info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 an, um die passende Ausführung für Ihre Anwendung zu wählen. Produktmerkmale Artikelnummer: 47041-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Daten Durchmesser: 4,1 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑E — Schnellarbeitsstahl mit Kobalt Schaftausführung: geschliffen — CNC‑Schliff für hohe Rundlaufgenauigkeit Farbe: 5% kobaltlegiert Ausführung: kurz — reduzierte Auskraglänge für Stabilität Typ: Typ N — Normalspirale, klassischer Metallbohrer Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich der Bohrer besonders gut? Der Spiralbohrer von MetavCUT (Standard Line, SKU 47041-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; die Kombination aus HSS‑E und 5% Kobaltlegierung erhöht die Standzeit beim Bohren in harten Materialien. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, der Spiralbohrer 4,1 mm (MetavCUT Standard Line, 47041-FDA) ist für den Einsatz in Handbohrmaschinen geeignet; die kurze Ausführung bietet dabei mehr Stabilität und reduziert die Gefahr von Verbiegen. Ist die Schaftausführung geschliffen oder gewalzt? Die Schaftausführung dieses Bohrers ist geschliffen, was eine hohe Rundlaufgenauigkeit und scharfe Schneidkanten gewährleistet; das ist besonders bei präzisen Metallbohrungen von Vorteil. Welche Vorteile bietet der 135° Spitzenwinkel in der Praxis? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers (47041-FDA) verringert das Ausbrechen beim Anbohren harter Werkstoffe und verbessert die Zentrierwirkung, sodass kontrolliertes Anbohren ohne übermäßiges Wandern möglich ist. Wie wird der Bohrer geliefert und wie viele Stück sind in einer Einheit? Der Spiralbohrer wird in einer Verpackungseinheit von 10 Stück geliefert; die SKU lautet 47041-FDA und gehört zur MetavCUT Standard Line.
4.1mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill (Karosseriebohrer) — 4.1 mm, 135° Point Angle, Double‑Ended, Black Finished, HSS‑G The Body Drill is a double‑ended Twist Drill for metalworking, engineered by MetavCUT for use in hand drills and drilling machines with a 4.1 mm diameter and a 135° point angle for reliable performance in hard materials. Double‑ended design for twice the usable life Fully ground HSS‑G for precise, clean holes 135° point angle for harder steels and stainless Reduced feed force; up to 40% faster drilling Faster, more efficient metalworking with precise cutting geometry The fully ground HSS‑G geometry delivers consistently sharp cutting edges and excellent runout accuracy, so drilling into alloyed and unalloyed Steel, Cast Steel and Non‑Ferrous Metals becomes more efficient. The 135° point angle reduces entry forces and improves centring in hard materials; as a result, users benefit from faster penetration and less tool wandering when compared to standard point geometries. Double‑ended design reduces downtime and cost per hole A double‑ended or double‑sided layout means each tool offers two functional tips, effectively providing two drills in one and cutting replacement frequency. When one tip dulls, the drill can be reversed for immediate reuse, which is especially practical in sheet metal and bodywork applications where short, stable drills are required. This design supports uninterrupted workflow and lowers total tooling cost. Ideal for demanding applications and compatible machines Designed for use with a hand drill or drilling machine, this Body Drill suits applications such as holes for rivets and thin‑sheet work, as well as machining into harder substrates. The fully ground shank and short overall length contribute to stability under higher loads, making the tool well suited for workshop and industrial environments where precise, repeatable holes are required. Handling, cooling and best‑practice recommendations Because ground HSS variants can be more brittle than rolled types, it is advisable to use adequate cutting fluid and moderate feed rates for sustained life. The fully ground spiral flutes ensure clean chip evacuation; combined with intermittent cooling this reduces thermal stress and prolongs tip life. For optimal results in thicker or very hard materials, prefer stationary machines with stable clamping. We recommend the MetavCUT Body Drill for professional metalworking tasks requiring fast, precise, and repeatable holes — for expert guidance or further technical data contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Body Drill / Karosseriebohrer Brand: MetavCUT SKU: 59041-FDA Diameter: 4.1 mm Point Angle: 135° Type / Execution: Double‑ended (double‑sided) Colour: Black finished without margin For Drill Type: Hand Drill / Drilling Machine Spiral Length: 13 mm Overall Length: 55 mm Shank: Fully ground Material: HSS‑G Model Series: Profi Line Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Body Drill are primarily used for machining high‑strength workpieces and larger drill diameters; their geometry makes them relatively easy to resharpen and able to withstand greater loads, which is why they are common for metalworking and bodyshop applications. Which three drill types are there? The three common drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Body Drill belongs to the metal drill group and is optimised for tough, alloyed and unalloyed metals. Can the MetavCUT Body Drill be used in wood? The MetavCUT Body Drill (a metal‑type twist drill) can be used in Wood, but guidance and finish tend to be inferior compared with dedicated wood drills; however, they are easier to resharpen and exhibit less self‑feeding in softer materials.
4.1mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
MetavCUT Body Drill – Twist Drill, Ø 4.1 mm, 135°, Double-sided, Bright finished, HSS‑G, Fully ground The MetavCUT Body Drill is a double‑ended Twist Drill designed for precision metalworking in Drilling Machines, offering a 135° tip angle and a fully ground shank for high concentric accuracy. HSS‑G construction for hard metals Double‑ended design for extended usability 135° tip angle for stainless steel and hard alloys Fully ground shank for precise concentricity Bright finished surface for smooth chip flow Outstanding cutting performance for demanding metals Designed for work with legated and unlegated steels, this Twist Drill delivers high cutting performance thanks to its HSS‑G alloy and a 135° tip angle. The geometry reduces radial forces when entering hard materials, so drilling starts cleaner and with less wandering. Users benefit from faster penetration in tough substrates and a reduced risk of workpiece damage. Practical workshops find the shorter, double‑ended format especially suited to sheet and bodywork tasks where repeatable, centred holes are required. Long life through precise grinding and surface finish A CNC grind of the flutes creates very sharp cutting edges and excellent runout properties, while the bright finished surface supports consistent chip evacuation. This ground manufacturing approach yields cleaner holes and longer usable life under appropriate cooling. The fully ground shank improves centring in chucks and reduces vibration, which in turn enhances tool life and hole quality when used in a stable Drilling Machine setup. Applications, guidance and safe handling in the workshop Engineered for metalworking, the Twist Drill is particularly effective on cast materials, Tempered Steels, Non‑Ferrous Metals and Hard Plastics. For best results, select appropriate cutting speeds and use coolant for higher alloy steels. When turning a blunt side, the double‑ended design allows immediate reuse by flipping the tool, providing operational efficiency in production or maintenance environments. Always secure the workpiece and observe safety practices when working with high‑speed Metal Drilling. Who benefits most and why experts choose this design Maintenance technicians, panel beaters and precision shops benefit from the combination of double‑ended utility and HSS‑G sharpness. The reduced axial force and improved centring capability make the drill a practical choice for repeatable holemaking in bodywork and thin‑plate metal applications. MetavCUT’s Standard Line aims to balance robust performance with straightforward handling for both station‑based and mobile Drilling Machine work. Strong recommendation: Choose the MetavCUT Body Drill for precision metal drilling — contact METAV Werkzeuge for tailored advice and technical support via email, phone or WhatsApp Are you unsure whether this Twist Drill meets your requirements or need additional data? METAV Werkzeuge offers competent consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58041-FDA Diameter: 4.1 mm Tip Angle: 135° Spiral Length: 13 mm Overall Length: 55 mm Material: HSS‑G Execution: Double-sided Shaft Execution: Fully ground Colour: Bright finished Intended Use: Drills for metal / Drilling Machine Model Series: Standard Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Body Drill Twist Drill? The MetavCUT Body Drill Twist Drill is primarily used for machining high‑strength metals and larger drilling diameters; its double‑ended design and HSS‑G composition make it suitable for demanding bodywork and thin‑plate applications where robust, repeatable holes are required. Can the MetavCUT Body Drill be used in handheld drills? The MetavCUT Body Drill Twist Drill is intended for use with Drilling Machines but can be used in suitable Hand Drills when proper clamping and reduced cutting speeds are observed; for best performance and safety, a stable Drilling Machine with coolant is recommended. What are Twist Drills primarily used for? Twist Drills are mainly applied in the machining of high‑strength materials and larger drill diameters; their design enables straightforward resharpening and they withstand higher loads, making them ideal for metalworking and bodywork tasks. Which three drill types exist? There are three common families of drill: Metal Drills, Wood Drills, and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the secondary cutting edge at the tip of the Twist Drill, which lowers friction forces and therefore decreases required feed force while improving centre‑holding accuracy in the workpiece. Can a metal drill be used to drill wood? A Metal Drill can be used in wood, but guidance and hole finish are generally inferior compared to purpose‑made Wood Drills. Metal Drills are easier to resharpen and tend to have less aggressive self‑feed characteristics. For which drilling depths is the Twist Drill most commonly used? A through‑hole is typically made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.
4.1mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Spiralbohrer – MetavCUT Standard Line, HSS-G, 4,1 mm Der Spiralbohrer in extra kurzer Ausführung ermöglicht stabile und kraftsparende Bohrungen in Metall bei begrenztem Bauraum. Spiralbohrer MetavCUT, Typ N Extra kurze Ausführung für enge Arbeitsräume HSS-G: schnelles Bohren in Stahl und Guss Zylinderschaft: passt in Standard-Bohrfutter 135° Spitzenwinkel für härtere Werkstoffe Mehr Leistung durch geschliffene HSS-G-Schneide für schnellere Ergebnisse Die geschliffene HSS-G-Schneide reduziert die Reibung und ermöglicht nach Herstellerangaben ein um bis zu 40 % schnelleres Bohren sowie rund 50 % geringere Anpresskraft gegenüber herkömmlichen HSS-Varianten. Dies bedeutet weniger Ermüdung bei der Arbeit und höhere Produktivität in der Werkstatt. Mit dieser Kombination aus robuster Werkstoffauswahl und optimierter Geometrie wird die Bearbeitungszeit bei Serien- und Einzelfertigungen spürbar verkürzt. Extra kurze Bauform sorgt für Stabilität und Flexibilität beim Bohren in engen Bereichen Die extra kurze Bauform erhöht die Verdrehungsfestigkeit und senkt die Bruchneigung, wenn wenig Bauraum zur Verfügung steht. Dadurch eignet sich der Bohrer besonders für Bleche, Profileisen und andere dünnwandige Werkstücke. Anwender profitieren von einfacher Handhabung in Winkelbohrmaschinen und bei beengten Montageverhältnissen, ohne auf Standzeit oder Präzision verzichten zu müssen. Universelle Schaftausführung und passende Geometrie für Metallanwendungen Der Zylinderschaft gewährleistet eine problemlose Aufnahme in gängige Dreibackenfutter und macht den Bohrer universell einsetzbar in Handbohrmaschine und Winkelbohrmaschine. Die 135° Spitzenwinkel-Geometrie optimiert das Anbohren härterer Werkstoffe wie legierten Stahl und Guss und reduziert das Auslaufen beim Startpunkt. So entstehen sauberere Bohrbilder und geringerer Nacharbeitaufwand. Zielgruppe, Einsatzbereiche und Praxistipps für sichere Ergebnisse Entwickelt für Werkstatt, industrielle Instandhaltung und anspruchsvolle Heimwerker, liefert die Standard Line zuverlässige Ergebnisse beim Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetallen. Zur Vermeidung von Durchrutschen im Bohrfutter empfiehlt sich bei hohem Drehmoment die Nutzung eines Spannfutters mit zusätzlicher Sicherung. Für höhere Präzision vorzentrieren oder ein kleines Ansenkbohrloch setzen. Setzen Sie auf den MetavCUT Standard Line Spiralbohrer in extra kurzer Ausführung für effizientere Metallbearbeitung; bei technischen Fragen steht Metav direkt zur Verfügung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 56041-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 1897 Daten Durchmesser: 4,1 mm Gesamtlänge: 55 mm Spirallänge: 22 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (schnellarbeitsstahl, geschliffen) Ausführung: extra kurz (stabilere Länge, reduzierte Bruchneigung) Schaftausführung: Zylinder (passt in Standard-Bohrfutter) Typ: Typ N (Normalspirale für Metall) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line FAQ Wie unterscheidet sich die extra kurze Ausführung von Standardlängen? Die extra kurze Ausführung des Spiralbohrers bietet mehr Stabilität und eine geringere Bruchneigung als Standardlängen, wodurch sie besonders bei beengten Arbeitsverhältnissen und dünnwandigen Werkstücken vorteilhaft ist. Für welche Materialien ist der MetavCUT Standard Line Spiralbohrer geeignet? Der MetavCUT Standard Line Spiralbohrer aus HSS-G eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff. Welche Vorteile bietet der 135° Spitzenwinkel in der Praxis? Ein 135° Spitzenwinkel reduziert das Wandern beim Anbohren in härteren Werkstoffen und sorgt für kürzere Anbohrzeiten sowie bessere Zentrierung bei Materialien wie Edelstahl und gehärtetem Stahl. Ist der Zylinderschaft für alle Bohrmaschinen geeignet? Der Zylinderschaft passt in gängige Dreibackenfutter von Handbohrmaschinen und Winkelbohrmaschinen, kann bei sehr hohem Drehmoment jedoch zum Durchrutschen neigen; in solchen Fällen ist ein Spannfutter mit besserer Kraftübertragung empfehlenswert. Welche Vorteile bringt die geschliffene HSS-G-Schneide konkret? Die geschliffene HSS-G-Schneide reduziert Reibung, ermöglicht schnellere Vorschübe und senkt die benötigte Anpresskraft, was die Effizienz erhöht und die Belastung für Maschine und Anwender vermindert.
4.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N, Ø 4.1 mm, 135° tip, HSS‑G, Bright Finished, Short, DIN 338) by MetavCUT The Twist Drill Type N short version is a precision metal‑drilling tool designed for use with hand and drilling machines, ideal for stainless and alloyed steels. HSS‑G material for hard metals 135° tip for stainless steel and hard materials Short design for increased stability and precision Fully ground shank for secure clamping Conforms to DIN 338 standard Faster penetration and less operator effort for metalworking The HSS‑G composition of this Twist Drill delivers measurable efficiency: tests show up to 40% faster drilling and about 50% less feed force compared with conventional HSS drills. This translates into shorter cycle times and reduced operator fatigue when working with alloyed and unalloyed steels, cast steels and non‑ferrous metals. The combination of material and geometry makes the tool especially suited for demanding production tasks where throughput and consistency matter. Short length increases rigidity and accuracy in tough jobs A short design according to DIN 338 reduces the exposed overhang and therefore the tendency to deflect, which improves hole position and roundness. For precision tasks on tougher materials the reduced flute length keeps the tool stable and minimises chatter. This benefit is particularly important when drilling from fixtures or in confined set‑ups where control and repeatability are required rather than deep penetration. 135° tip and Type N spiral: reliable centring and wear behaviour Equipped with a 135° tip, the drill is optimised for harder workpiece materials such as stainless steel; the flatter point lowers plunge forces and delays wear on the cutting lip. As a Type N (normal spiral) tool, it offers the classic metal‑drilling balance between chip evacuation and cutting action. The tip geometry also supports better centring on curved surfaces and reduces burr formation, producing cleaner entry holes and simplifying downstream deburring. Secure clamping and broad machine compatibility The fully ground shank provides consistent diameter tolerance for secure clamping in chucks, reducing slippage and concentricity errors. Designed as a short twist drill for manual and machine drilling operations, it suits both stationary drilling machines and robust hand drills. This makes it a practical choice for workshops and maintenance technicians who need a reliable, easy‑to‑mount cutter for everyday metalworking tasks. Who benefits and when to choose this tool Maintenance crews, toolroom staff and production operators working with steels, castings or hard plastics will find this short Twist Drill advantageous where accuracy and tool life are priorities. Choose this twist drill when hole precision, reduced feed effort and process reliability are required rather than maximum hole depth. For guided production runs and fixture work the shorter length improves handling and repeatability. Strong recommendation: For demanding metal drilling choose the MetavCUT Twist Drill Type N in HSS‑G for superior performance; for technical advice or to confirm suitability for your workpiece contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27041-FDA Diameter: 4.1 mm Tip angle: 135° Type: Type N Length overall: 75 mm Length of spiral: 43 mm Version: Short Shank finish: Fully ground Surface colour: Bright finished Material: HSS‑G Standard: DIN 338 Application: Drills for metal; suitable for hand and drilling machines Series: Basic Line Notes: HSS‑G provides faster drilling and lower feed force; short design increases stability and precision Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications suit the Twist Drill Type N by MetavCUT? The MetavCUT Twist Drill Type N is primarily intended for metalworking: it drills alloyed and unalloyed steels, cast steels, cast iron, sintered iron, malleable castings, non‑ferrous metals and hard plastics, offering durable cutters for workshop and maintenance applications. Can the MetavCUT Twist Drill be used in portable hand drills? Yes, the MetavCUT Twist Drill short version is compatible with hand and drilling machines; its short design and fully ground shank ensure stable clamping and safe operation in robust portable drills and bench units. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high‑strength materials and for larger drill diameters. This form is easy to sharpen and withstands higher loads. Which three drill types exist? There are three main groups: Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills sharpened? Sharpening reduces the cross‑edge at the point of the twist drill. By sharpening the point, frictional forces are significantly lowered so that less feed force is required. At the same time the tip centres better in the workpiece. Can a metal drill be used to drill wood? Metal drills can be used in wood, but they generally guide less well and produce a less clean hole. They are, however, easier to re‑grind and show less self‑feeding behaviour. For which drilling depths is the twist drill most used? Solid drilling is commonly performed with a twist drill. For diameters up to 20 mm and drilling depths up to 100 mm the twist drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE steels are always superior to HSS is incorrect. When deciding, consider whether the working conditions justify the higher purchase cost of HSSE.
4.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G, 4.1 mm, 135°, Bright Finished, DIN 338 by MetavCUT A Twist Drill (Type N) in short execution for precise metal drilling with a 4.1 mm diameter and a 135° point angle, suited for use in Drilling Machines and Hand Drills. Short execution for increased stability and precision Fully ground shank for high concentricity 135° point angle optimised for hard materials Conforms to DIN 338 for short HSS twist drills Outstanding drilling performance and faster cycle times The short Twist Drill in HSS‑G combines a reduced overhang with a ground flute geometry to deliver high stability and precision when machining metal. Shorter projection reduces the tendency to deflect, which translates into cleaner holes and longer tool life under comparable conditions. The ground design provides very sharp cutting edges and excellent runout accuracy, enabling up to 40% faster drilling speeds and requiring up to 50% less feed force compared with conventional HSS versions when used with suitable machining parameters. Robust geometry for demanding materials With a 135° point angle and the classical Type N spiral, this drill is optimised for harder materials such as stainless and alloyed steels. The larger point angle shortens the initial entry phase, improving centring and reducing chatter on tough surfaces. The fully ground shank and CNC‑ground flutes ensure consistently accurate centring and repeatable hole quality, making it ideal for precision metalworking tasks in production and repair environments. Practical design for workshop and machine use Designed to the DIN 338 standard for short twist drills with cylindrical shank, this tool is intended primarily for stationary or mobile machine applications where high concentricity is required. The short length and bright finished surface facilitate handling and inspection, while the overall length of 75 mm and spiral length of 43 mm suit common drilling depths without unnecessary flex. The Type N geometry focuses on metalworking, not soft woods or masonry. Who benefits from this Twist Drill Engineers, maintenance technicians and metalworkers who demand precise, repeatable holes in alloys and steels will value the combination of HSS‑G material and short design. The drill is particularly useful where tool rigidity matters—small bores in hardened or cast materials and jobs on bench drills or portable drilling machines where minimising deflection improves final part quality. For tasks requiring high surface finish and tight tolerances, this drill provides reliable performance. For applications requiring expert advice on suitability, tolerances or recommended machining parameters, Metav Werkzeuge offers comprehensive technical support — contact via info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 We recommend the MetavCUT Twist Drill Type N for precision metalworking where stability and repeatable hole quality are essential — for tailored technical guidance contact METAV Werkzeuge. Twist Drill (Bezeichnung): Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 45041-FDA Type: Type N Diameter: 4.1 mm Point angle: 135° Execution: Short (kurz) Colour / Finish: Bright Finished (blank) Shank design: Fully Ground (geschliffen) Spiral length: 43 mm Overall length: 75 mm Material: HSS‑G Standard / Norm: DIN 338 Application: Drills for metal (Bohrer für Metall) Model series: Standard Line Intended machine: Drilling Machine / Hand Drill (Handbohrmaschine) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill from MetavCUT (Type N)? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger hole diameters; its ground geometry makes it easy to regrind and it withstands higher loads, which suits it for demanding metalworking tasks. Which three drill types exist and how does the MetavCUT Twist Drill fit in? Common categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill group and is designed specifically for steels and similar materials. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the chisel edge at the tip, lowering friction and the required feed forces while improving centring of the drill in the workpiece for the MetavCUT Twist Drill (Type N). Can a metal Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and surface quality are inferior compared with dedicated wood drills; however, metal drills are easier to regrind and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through hole is typically made with a Twist Drill; for diameters up to about 20 mm and depths up to 100 mm the Twist Drill is the most frequently used tool, including the MetavCUT short HSS‑G versions. Is HSS or HSSE better for my application? The notion that HSSE is always superior to HSS is not universally true; evaluate working conditions and material specifics before choosing, and consult Metav Werkzeuge for tailored advice on whether the MetavCUT HSS‑G Twist Drill is appropriate.
4.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N – 4.1 mm, 135° Point, HSS‑G, Short, Bright Finished, DIN 338 by MetavCUT The Twist Drill Type N is a short HSS‑G drill for Drilling Machines, engineered for stable, precise metalworking in hard materials. Short HSS‑G Twist Drill for high stability 135° Point angle for hard materials Fully ground shank for precise runout Conforms to DIN 338 for short drills Suitable for Drilling Machines and metalwork Faster, more stable drilling for demanding metal applications The short HSS‑G construction of this Twist Drill ensures reduced overhang and therefore significantly improved stiffness compared with standard length drills. Users benefit from higher feed stability and less tendency to wander, which translates directly into cleaner, more accurate holes and fewer rejects. The shorter Spiral Length and reduced cantilever make this design particularly effective when machining steel, cast steel and other hard metals, where maintaining concentricity is critical for downstream assembly and finishing. Better penetration and longevity in tough materials A 135° Point Angle combined with the ground geometry reduces the initial cutting forces and shortens the drilling‑in time for harder materials such as stainless steel and tempered steels. The fully ground (HSS‑G) flute geometry produces sharp cutting edges and high runout accuracy, which improves hole quality. For professional workshops, this means faster cycle times and more predictable tool life when used with appropriate cooling and moderate cutting speeds. Precise use cases and operator guidance Designed for operation in Drilling Machines, this short Twist Drill is ideal for precision tasks such as jig and toolmaking, maintenance and repair work, and production runs where tight positional accuracy is required. When drilling, use steady clamping, correct spindle speeds for the material and a suitable coolant to extend life. Because the drill is ground rather than roll‑formed, it is easier to resharpen, but users should note that ground HSS variants require careful handling to avoid chipping. Clear standards and material benefits for professional users Manufactured to DIN 338 as a short Twist Drill with a Cylindrical Shank, the tool meets established tolerances and dimensional standards for short HSS drills. The designation Type N denotes the standard spiral geometry optimised for metalworking. These specifications offer purchasers verifiable parameters for production planning and procurement and ensure interchangeability with other DIN‑compliant tooling in industrial environments. Strong recommendation: Choose the MetavCUT Profi Line Twist Drill for precise, stable metal drilling — METAV Werkzeuge offers competent technical advice and support at info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications Designation: Twist Drill Marke: MetavCUT SKU: 48041-FDA Diameter: 4.1 mm Point angle: 135° Type: Type N Execution: Short (kurz) Spiral length: 43 mm Overall length: 75 mm Shank execution: Fully ground (geschliffen) Finish/Colour: Bright finished (blank) Material: HSS‑G Norm: DIN 338 For Machine: Drilling Machine (Handbohrmaschine) Application: Drills for metal (Bohrer für Metall) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength metals and larger drill diameters; it is especially suitable for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Castings, Non‑Ferrous Metals and hard Plastics. Its short design offers greater stability and precision when working in demanding metal applications. Which three basic drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. The MetavCUT Twist Drill falls into the Metal Drill category and is optimised for machining metallic materials. Why are Twist Drills point‑sharpened? The point sharpening reduces the cross‑edge at the tip, which significantly lowers friction forces and therefore requires less feed force. As a result, the MetavCUT Twist Drill centres more reliably in the workpiece and improves hole accuracy. Can you use a Twist Drill to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but it generally provides poorer guidance and a less clean finish than dedicated Wood Drills. Metal drills are easier to resharpen and tend to have lower self‑feeding action compared with specialised wood drills. At which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is typically executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool; the MetavCUT short design is particularly well suited for controlled depths where stiffness is essential. What is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to HSS is not universally correct. When choosing between HSS and HSSE for the MetavCUT Twist Drill, evaluate the specific working conditions and whether they justify the higher acquisition cost of HSSE for the intended application.
4.1mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — HSS-G Twist Drill (Diameter 4.1 mm, 135° Point, Long, Bright Finished) The Twist Drill is a long HSS-G drill bit designed for deep metal drilling and tight access areas, suitable for use with hand and drilling machines and compliant with DIN 340. Long HSS-G design for deep holes 4.1 mm Diameter for precise pilot holes 135° point angle for hard materials Fully ground shank for high runout accuracy DIN 340 long series with bright finish Power and Precision for Demanding Metalwork The Twist Drill from MetavCUT combines the wear resistance of HSS-G with a 135° point geometry to tackle harder alloys with improved centring. The ground flute geometry delivers sharp cutting edges and consistent chip evacuation, which reduces cutting forces and increases hole quality. For operations in alloyed and unalloyed steel, cast materials and hard plastics, this design ensures a reliable, repeatable machining result and reduces the need for rework. Reach Deeper: Long Version for Difficult Access Engineered as a long execution according to DIN 340, this drill offers extended overall length and working spiral length to access recessed or hard-to-reach bore sites. The longer geometry makes it ideal for drilling deeper holes without switching tools. The bright finished surface helps to reduce friction and improves visibility of the cutting zone, while the fully ground shaft provides superior runout accuracy for straight, precise holes even when used in hand-held drilling setups. Best Materials and Typical Applications This Twist Drill is particularly suited to drilling operations in legierte und unlegierte Stähle (alloyed and unalloyed steel), Gussstahl, Gusseisen, Sintereisen, Nichteisenmetalle and hard engineering plastics. The combination of HSS-G material and the 135° tip reduces chipping and improves entry in tougher substrates. When used as intended, users benefit from cleaner hole walls and maintained dimensional accuracy, which simplifies subsequent assembly or finishing steps. Handling Tips for Reliable Results To preserve tool life and maintain performance, use moderate feed with adequate coolant when machining harder materials; the ground geometry can be more brittle than rolled alternatives and benefits from controlled cutting conditions. For best centring and lower heat build-up, start with a suitable pilot where possible and ensure the drill is clamped with minimal runout. The fully ground shaft enhances chuck performance and reduces vibration, supporting consistent hole quality in both production and workshop environments. Choose the MetavCUT Twist Drill for precise, deep metal drilling — for personalised technical advice and application support contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 53041-FDA Diameter: 4.1 mm Point angle: 135° Execution: long Overall length: 119 mm Spiral length: 78 mm Colour: bright finished Shaft execution: fully ground Material: HSS-G Norm: DIN 340 Model series: Standard Line Application: Drills for metal For drilling machine: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill primarily used for? The MetavCUT Twist Drill is mainly applied for machining high-strength materials and larger bore diameters; its long version suits deeper holes and less accessible locations while the ground geometry allows faster drilling with lower applied feed force. Can the MetavCUT Twist Drill be used with a hand drilling machine? Yes, the MetavCUT Twist Drill is suitable for use with a Handbohrmaschine (drilling machine); its fully ground shaft improves chuck grip and runout accuracy, making it appropriate for both stationary and careful hand-held applications when correct speeds and cooling are observed. For what is a Twist Drill used? A Twist Drill is primarily applied when machining high-strength materials and larger drill diameters; this form is easy to resharpen and withstands higher loads. Which three drill types are there? Metal drill, Wood drill, Stone/Concrete drill. Why are Twist Drills pointed? The pointing reduces the cross edge at the tip of the Twist Drill, which significantly lowers friction forces and requires reduced feed force; pointing also improves centring of the drill tip in the workpiece. Can you drill wood with a Twist Drill? A metal drill can also be used in wood, but guidance and surface quality are inferior; however, such drills are easier to resharpen and usually have less self-feed tendency. At what drilling depths is the Twist Drill most commonly used? Solid drilling with a Twist Drill is common; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to standard HSS is not correct; evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for your application.
4.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
MetavCUT Twist Drill — Type N, 4.25 mm, HSS, Short, 118° (Black, DIN 338) The MetavCUT Twist Drill Type N is a short HSS metal drill designed for precise holemaking in hand drills and drilling machines. Short HSS design for high stability 118° point angle for reliable centring 4.25 mm precision diameter DIN 338 compliant for short twist drills Suitable for hand drills and drilling machines Greater accuracy through a short, stable design The short Twist Drill construction reduces overhang and therefore vibration, which significantly improves hole accuracy when working with metal. Made from HSS (High Speed Steel), this short Type N cutter offers elasticity that lowers the risk of breakage when drilling small holes under 6 mm. For users who require clean, repeatable results in maintenance work or light production, the compact geometry means less runout and faster setup. Optimised tip and geometry for metalworking efficiency A 118° point angle balances centring ability and cutting action for many common metals; it makes the drill easier to start and is suitable for materials like mild steel and aluminium. The Type N spiral is the classic metal-drilling geometry, engineered for chip evacuation and durable performance. Choosing the correct point angle reduces the need for rework and shortens cycle time when multiple holes are required. Material compatibility and practical guidance This short HSS tool is intended primarily for metal applications including alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics — in other words, typical uses grouped under "Drills for metal". Because the Type N geometry is not optimised for very soft woods, users seeking cleaner guidance for timber should prefer dedicated wood drills. For longevity, moderate cutting speeds and proper lubrication when machining harder alloys are recommended. Who benefits and where to use it Maintenance technicians, machinists and metalworking hobbyists who operate hand drills or compact drilling machines will gain most from this compact twist drill. Its 4.25 mm diameter and short overall length provide a stable tool for confined setups and jig work. If uncertainty remains about suitability for a specific material or machine, METAV Werkzeuge offers comprehensive, expert advice to match tools to tasks. Choose the MetavCUT Twist Drill Type N for precise metal drilling and contact METAV Werkzeuge for tailored technical support — 📧 info@metav-werkzeuge.com • ☎️ +49 2822 7131930 • ✔️ WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 400425-FDA Diameter: 4.25 mm Spiral length: 43 mm Total length: 75 mm Point angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: short Colour: black Standard: DIN 338 Application: Drills for metal For use with: Hand Drill / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high-strength materials and larger drill diameters; its shape allows relatively easy resharpening and it withstands higher loads, making it suitable for drilling steel, cast iron and non-ferrous metals. Which three drill types exist? There are three main drill categories: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N is an example of a metal drill optimised for machining metallic materials.
4.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short HSS‑G drill, Ø 4.25 mm, 135° tip, bright finished The Twist Drill Type N is a short, fully ground HSS‑G drill engineered for precise metalworking tasks in drilling machines and hand drills. Short design for higher stability and precision HSS‑G ground geometry for clean metal holes 135° tip for harder materials like stainless steel Fully ground shank for accurate runout Conforms to DIN 338 for short twist drills Precision and strength for demanding metalworking The Twist Drill from MetavCUT combines a HSS‑G ground geometry with a 135° point to deliver reliable performance when drilling harder metals. Because the flutes and cutting geometry are produced by CNC grinding, the result is sharp cutting lips and a high runout accuracy, which leads to cleaner holes and reduced burr formation. This short version reduces overhang and therefore vibration, so the user benefits from improved centring and longer tool life when paired with adequate cooling. Stable holes through reduced overhang and robust shank A shorter overall length means less deflection and better feed control, particularly when working on alloyed and unalloyed steel, cast steel, and non‑ferrous metals. The fully ground shank ensures accurate clamping and minimal eccentricity in the chuck, which supports consistent hole quality. Use in stationary or portable drilling machines profits from the increased stiffness, making the drill a good choice for workshop setups where precision matters. Who gains most from this compact design Metalworkers, maintenance technicians and toolroom operators will appreciate the combination of a short flute length and Type N normal spiral for typical metal drilling tasks. The drill was designed to excel where stable, repeatable holes are required rather than for deep through‑holes. For users needing quick, accurate spot drilling and finishing holes in tougher materials, this design reduces rework and improves process reliability. Practical guidance and material recommendations To maximise performance, operate the drill with appropriate cutting fluid and moderate speeds for the workpiece material. The 135° point reduces chipping on entry and shortens the start time on hard metals; however, for very soft materials consider a different point geometry. The designation DIN 338 indicates this is a short cylindrical‑shank twist drill series; ground types like this (often marked HSS‑G) are easier to re‑sharpen but can be more brittle than rolled variants, so avoid excessive side loads and use cooling where possible. Highly recommended for precision metalwork: choose the MetavCUT Twist Drill Type N with HSS‑G ground geometry and consult METAV Werkzeuge for tailored technical advice — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 450425-FDA Diameter: 4.25 mm Total Length: 75 mm Spiral Length: 43 mm Point Angle: 135° Type: Type N Execution: short Colour: bright finished For Drilling Machine: Drilling Machine Shank Execution: fully ground Model Series: Standard Line Material: HSS-G Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N by MetavCUT used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters in metalworking. Its short design and ground geometry make it suitable for precise metal drilling tasks where stable, clean holes are required. Which three drill types exist? Common drill categories are metal drills, wood drills and masonry/concrete drills, and the MetavCUT Twist Drill Type N belongs to the metal drill group designed for ferrous and non‑ferrous metals. Why are twist drills pointed? The point on a twist drill reduces the size of the chisel edge at the tip, lowering friction and therefore the required feed force; this improves centring and reduces the tendency for the drill to wander in the workpiece. Can a metal twist drill be used for wood? A metal‑type drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically inferior compared with dedicated wood drills; however, metal drills are easier to re‑sharpen and have lower self‑feed tendencies.
4.2mm Double-Ended HSS Body Drill Short Spiral Cross Point Cylindrical Shank, Profile-Ground - TECWERK
Take advantage of a compact double-ended design combined with HSS for durable cutting and fast tip replacement; ideal for clean holes in thin sheet metal. Order the TECWERK double-ended bodywork drill D 4.2 mm directly via Metav Werkzeuge or consult our specialists for batch supply and suitability. TECWERK double-ended bodywork drill D 4.2 mm — HSS, short spiral The TECWERK double-ended bodywork drill D 4.2 mm is a compact HSS twist drill designed for fast, clean drilling in thin sheet metal with handheld drilling machines. Double-ended design for quick tip changes High-speed steel (HSS) for durable cutting Short spiral ideal for thin sheet metal Cylindrical shank for handheld drills Consistent, fast holes in thin materials This double-ended bit, made from HSS, delivers consistent performance when working on thin gauges. The 4.2 mm diameter and short spiral reduce material pull-through and help to evacuate chips reliably in sheet-metal operations, which shortens cycle times and minimises rework. The compact two-tip format halves downtime for tip changes, improving throughput in small-batch workshop environments while keeping tool handling simple. Clean edges with precise cutting geometry A profile-ground flute and cross-ground point geometry produce clean entry holes and reduced burr formation, so finishing effort is lowered. The bright, uncoated finish contributes to neat hole walls and consistent hole diameters across runs. These features together extend service intervals and maintain hole quality, making the bit suitable for applications where appearance and fit are important in final assemblies. Easy, stable handling for handheld drilling The cylindrical shank and right-hand cutting orientation are optimised for use in conventional handheld drills and light bench units. The short helix limits chatter and supports stable drilling in thin sheets, while the two usable ends reduce tool changes during on-site or mobile repair tasks. This design balances operator convenience with the need for repeatable results in maintenance and vehicle bodywork contexts. Practical supply and workshop compatibility Supplied in a packaging unit of 10, the product is practical for small workshops and service fleets that require regular replacement bits without complex inventory. The robust HSS construction and straightforward geometry mean stocked items remain useful across a range of common sheet-metal tasks, simplifying procurement and helping to reduce the total number of different tools required. For reliable workshop supply of TECWERK double-ended bodywork drills and expert advice on suitable quantities, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000860142NW Product name: Double-ended bodywork drill D 4.2 mm HSS TECWERK Manufacturer: TECWERK Packaging unit: 10 UID: 2000860142NW Facts Diameter: 4.2 mm Packaging unit: 10 pieces Special features HSS material Profile-ground Cylindrical shank Right-hand cutting Cross-ground point Short spiral Best suited for drilling thin materials with handheld drills Primarily for sheet-metal work Bright/plain finish Execution: bodywork drill FAQ What materials is this drill suitable for? The TECWERK double-ended bodywork drill D 4.2 mm (HSS) is primarily intended for thin sheet metal and similar thin materials; other substrates are not specified for this item. Can the bit be used in battery-powered handheld drills? Yes — the cylindrical shank and right-hand cutting geometry make the bit compatible with standard handheld and battery drills for routine workshop and repair use. How does the double-ended design benefit workshop workflows? The double-ended design provides two cutting ends per bit, reducing tool changes and downtime and supporting faster throughput during repetitive sheet-metal drilling tasks. Is the drill coated or uncoated? The product is supplied in a bright/plain finish (uncoated), with profile-ground and cross-ground geometry for clean holes without a coating. How is the product packaged for stocking? The drill is supplied in a packaging unit of 10 pieces, suitable for routine replacement in service and maintenance inventories. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com