High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
4.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill (Type N) — 4.2 mm · 118° point · short · black · DIN 338 · HSS · MetavCUT The Twist Drill Type N is a short HSS metal-drilling bit designed for precise work with hand and drilling machines. High-Speed Steel for durable metal drilling Short design for improved stability and precision 118° point angle for easier centring on workpieces Conforms to DIN 338 for consistent manufacturing quality Black finish reduces glare and improves visibility Precision and durability for demanding metalwork Built for metal applications, this short HSS bit provides a reliable combination of hardness and elasticity. The material choice—High Speed Steel—ensures sustained cutting performance on alloyed and unalloyed steels, cast iron and non-ferrous metals while reducing the risk of brittle fracture on small diameters. For operators who require repeatable hole quality, the use of a Type N geometry yields steady chip formation and prolonged tool life. Better control and straighter holes thanks to the short design Because the overall length is reduced, vibration and deflection are minimised, resulting in straighter bores and improved surface finish. The compact geometry of this short variant increases rigidity when clamped in the chuck, which is especially advantageous for precise bench and hand drilling tasks. Users notice fewer wander effects at the start of the hole and a lower tendency for the tool to chatter under moderate feeds. Faster centring and adaptable cutting with the 118° point A 118° point angle offers balanced entry performance and is well suited to softer to medium-hard metals and general-purpose shop work. This tip geometry helps to centre the bit quickly without excessive force, making initial alignment easier on curved or slightly irregular surfaces. For operators unfamiliar with drill geometry, the shorter point reduces the chance of slipping while starting the hole and supports consistent results. Designed for workshop use and straightforward application Engineered to DIN 338 standards, this bit fits the typical requirements of industrial and craft environments: consistent dimensions, reliable tolerances and easy handling. The black surface finish improves visibility against bright metal shavings and can offer modest protection against corrosion. Suited to standard drilling machines and hand operation, the tool is a practical choice for mechanics, maintenance teams and metal fabricators seeking a robust general-purpose twist drill. Strong recommendation: Choose the MetavCUT Twist Drill Type N for precise metal drilling — METAV Werkzeuge provides expert technical advice and support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 40042-FDA Diameter: 4.2 mm Spiral length: 43 mm Total length: 75 mm Point angle: 118° Execution: short Type: Type N Colour: black Material: HSS Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine / Hand drilling machine Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; the HSS composition makes this drill suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, delivering reliable performance in standard shop conditions. How does the short version of the Twist Drill improve results? A short Twist Drill reduces overhang and therefore deflection, which improves hole accuracy and surface finish. The shorter length increases rigidity in the chuck and lowers the tendency to chatter during manual or machine drilling. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high-strength materials and large drill diameters. Its form allows straightforward sharpening and it withstands higher loads during drilling. Which three drill types exist? The three common drill types are metal drill, wood drill and stone/concrete drill. Why are Twist Drills pointed? Pointing reduces the cross-cut at the tip of the Twist Drill. By regrinding the tip, friction forces are significantly lowered which reduces the required feed force; at the same time the drill tip centres better in the workpiece. Can a metal drill be used for wood drilling? A metal drill can be used in wood, but guidance and hole cleanliness are typically worse than with a dedicated wood bit. Metal drills are easier to resharpen and have less self-feeding action. At which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is usually made with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE steels are always superior to conventional HSS is not universally true. When choosing, consider whether the working conditions justify the higher purchase price of HSSE.
4.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Die Kombination aus hoher Stabilität, langlebigem HSS-E und präzisem 135° Spitzenwinkel sorgt für saubere Metallbohrungen bei geringem Bruchrisiko; bei Fragen zur Anwendung hilft die Beratung von Metav gern weiter. Bestellen Sie den Spiralbohrer von MetavCUT direkt über Metav oder rufen Sie die Technik an. Spiralbohrer kurz HSS-E 4,2 mm von MetavCUT Spiralbohrer von MetavCUT in Kurz-Ausführung für präzise Metallbohrungen mit hoher Standzeit und guter Rundlaufgenauigkeit Spiralbohrer »47042-FDA« von MetavCUT HSS-E 5% Kobaltlegierung für harte Werkstoffe geschliffen für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für Edelstahl und Stahl Kurze Ausführung für mehr Stabilität beim Bohren Höhere Präzision durch geschliffene Werkzeuggeometrie Die geschliffene Fertigung sorgt für sehr scharfe Schneiden und eine ausgezeichnete Rundlaufgenauigkeit, was sich in sauberen Bohrbildern und gleichmäßigen Spankonturen niederschlägt. Die Ausführung nach DIN 338 klassifiziert den Bohrer als kurzen Spiralbohrer mit Zylinderschaft und macht die Qualität nachvollziehbar. Anwender profitieren von vermindertem Wandern beim Anbohren und besserer Zentrierung im Werkstück. Robustheit und Einsatzbereiche für den Werkstattalltag Diese Kurz-Ausführung wurde für den Einsatz an der Handbohrmaschine und stationären Maschinen entwickelt und eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe. Die reduzierte Auskraglänge erhöht die Stabilität und senkt das Risiko von Verbiegen oder Bruch, wodurch die Produktivität in Werkstatt und Montage steigt. Optimaler Spitzenschliff und Typ N Geometrie für Metall Der 135° Spitzenwinkel reduziert das Anheben beim Anbohren harter Werkstoffe und verbessert die Anlaufeigenschaften in dünnen Blechen und Profilen. Die normale Spirale Typ N ist die klassische Metallgeometrie und bietet ausgewogene Spanabfuhr bei typischen Schnittbedingungen. Für Edelstahl empfiehlt sich die Verwendung von Kühlschmierstoff und moderater Vorschubgeschwindigkeit. Praxisnahe Hinweise für sicheren Einsatz Für saubere Passungen vorher mit einem Zentrierbohrer anpunktieren und bei Bohrungen tiefer als das Fünffache des Durchmessers Zwischenbohrungen planen. Die Kurz-Ausführung verringert das Bruchrisiko bei Bohrungen unter 6 mm, die Rolle der Kühlung bleibt bei harten Werkstoffen entscheidend. Verpackungseinheit Zehn Stück macht die Bestellung für kleine Werkstätten wirtschaftlich praktikabel. Empfehlung: Der Spiralbohrer von MetavCUT in der Standard Line verbindet Stabilität, HSS-E und präzise Geometrie — bei Fragen zur Auswahl kontaktieren Sie Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47042-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 338 Ausführung: kurz Fakten Durchmesser: 4,2 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-E (Schnellarbeitsstahl mit Kobaltanteil) Kobaltlegierung: 5% kobaltlegiert Schaftausführung: geschliffen (Vollschliff) Typ: Typ N (Normalspirale für Metall) Für Bohrmaschine: Handbohrmaschine FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT aus HSS-E mit 135° Spitzenwinkel ist für Edelstahl geeignet; bei rostfreien Stählen empfiehlt sich Kühlung und moderater Vorschub, um Standzeit und Bohrbild zu optimieren. Welche Vorteile bietet die geschliffene Ausführung gegenüber gewalzten Bohrern? Die geschliffene Ausführung des Spiralbohrer liefert schärfere Schneiden und bessere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; das Modell 47042-FDA ist daher besonders für präzise Metallbearbeitung empfohlen. Für welche Maschinen ist dieser Bohrer vorgesehen? Der Spiralbohrer 47042-FDA wurde für Handbohrmaschine und stationäre Maschinen entwickelt und eignet sich im Standard-Bereich für Werkstatt, Montage und DIY-Anwendungen. Wie viele Bohrer sind pro Verpackungseinheit enthalten? Die Verpackungseinheit umfasst Zehn Stück, was die Versorgung kleiner Werkstätten vereinfacht und Nachbestellungen reduziert. Worin liegt der Nutzen der 5% Kobaltlegierung beim HSS-E Bohrer? Der Kobaltanteil erhöht die Warmhärte und Verschleißfestigkeit des HSS-E Materials, so dass der Bohrer auch bei höheren Schnitttemperaturen und in gehärteteren Werkstoffen länger zuverlässig arbeitet.
4.2mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill — MetavCUT Profi Line double-ended HSS‑G, 4.2 mm, 135° tip, black finished without margin A Body Drill double-ended Twist Drill designed for metalworking on a Drilling Machine, offering a 4.2 mm diameter and a 135° tip for hard materials. MetavCUT Profi Line double-ended design 4.2 mm diameter ideal for precise metal holes 135° tip for harder materials like stainless steel Fully ground shank for high runout accuracy Black finished without margin for wear resistance Faster, cleaner metal drilling thanks to ground HSS geometry The HSS‑G construction of this Twist Drill delivers significantly improved cutting performance compared with rolled drills. Because the flute geometry is produced by CNC grinding, the Body Drill shows very sharp cutting edges and high roundness, which translates into cleaner holes and reduced rework. For the user this means faster progress during series work and less manual finishing. The fully ground design also reduces the required feed force, helping to minimize operator fatigue during repetitive drilling tasks. Robust double‑ended design for sheet metal and bodywork The double‑ended (doppelseitig) layout makes this drill especially practical in workshop environments: when one tip becomes dull it is simply turned and the second tip is used, effectively providing two ready‑to‑use ends in one tool. This short, sturdy Twist Drill is therefore well suited for thin sheet and rivet hole applications in automotive and metal‑fabrication contexts, where stability and repeatability matter more than long penetration depths. Geometry tuned for hard materials and precise centring A 135° tip reduces walking and improves centring on harder materials such as stainless steel and tool steels. The relatively large tip angle shortens the initial penetration phase and spreads cutting forces more evenly, which supports accurate hole placement. With a flute length of 13 mm and a total length of 55 mm, the tool is optimized for shallow to medium depth holes where precision rather than long reach is the priority. Designed for workshop drills with guidance for safe use This Twist Drill is intended for use in a Drilling Machine or suitable hand drill under controlled conditions. The fully ground shank ensures excellent runout accuracy when clamped in a good chuck. Because ground HSS tools can be more brittle than rolled equivalents, it is recommended to use moderate speeds, appropriate lubrication or cooling for steel, and to avoid heavy shock loads. When used correctly, the tool performs reliably in alloyed and unalloyed steels, cast materials, non‑ferrous metals and certain hard plastics. Who benefits most from this Profi Line Body Drill The MetavCUT Profi Line Body Drill is targeted at professional workshops, bodyshops and maintenance departments that require a compact, dependable drill for metalworking tasks. Its double‑ended convenience and precise grind make it especially useful where downtime must be minimised and hole quality is critical. We strongly recommend the MetavCUT Profi Line double‑ended HSS‑G Twist Drill for reliable, precise metal drilling; for technical advice or to confirm suitability for your application please contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Body Drill Brand: MetavCUT SKU: 59042-FDA Diameter: 4.2 mm Tip angle: 135° Execution: double-ended Colour/Finish: black finished without margin For Drill Type: Drilling Machine Flute length: 13 mm Total length: 55 mm Shank finish: fully ground Material: HSS-G Model Series: Profi Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Body Drill be used on stainless steel and other hard metals? The MetavCUT Body Drill, a double‑ended Twist Drill, is suitable for harder materials; the 135° tip and HSS‑G geometry improve centring and wear resistance when drilling stainless steel and alloyed steels, provided appropriate speeds and cooling are used. Is this Body Drill suitable for portable hand drills? The Body Drill is designed for use in a Drilling Machine and can be used in robust portable hand drills, but for best results use a well‑maintained chuck and moderate speeds; the fully ground shank benefits stability and runout accuracy. For what is a Twist Drill used? A Twist Drill is primarily applied to the machining of high‑strength materials and larger hole diameters; its form is relatively easy to re‑grind and withstands higher loads, making it common in bodywork and thin‑sheet drilling. Which three drill types are there? The main categories are Metal Drills, Wood Drills and Masonry/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of a Twist Drill, significantly lowering friction and thus the required feed force; it also improves centring of the tip in the workpiece. Can a metal Twist Drill be used for wood? A Metal Drill can be used in wood, but guidance is poorer and the hole finish is usually less clean; metal drills are easier to re‑grind and show less self‑feeding compared with dedicated wood drills. For which drilling depths is the Twist Drill most used? Twist Drills are the standard tool for solid drilling; they are most common for diameters up to around 20 mm and drilling depths up to about 100 mm.
4.2mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill — Twist Drill, 4.2 mm, 135° tip, double sided, bright finished, HSS‑G The Body Drill is a double‑sided twist drill for metalworking, designed for use with drilling machines and optimised for sheet metal and rivet holes. Double‑ended design for reversible use Fully ground HSS‑G for high precision Optimised 135° tip for hard metals Bright finished surface for easy chip evacuation Short, stable geometry for sheet metal work High‑performance Material for Faster, Cleaner Drilling The HSS‑G construction combined with a fully ground shaft yields exceptionally sharp cutting edges and high concentricity. This manufacturing method—CNC grinding rather than rolling—produces a Twist Drill with very precise geometry, which leads to cleaner holes and reduced runout. In practice, the ground HSS geometry can deliver up to 40% faster drilling with roughly 50% less feed force compared with conventional HSS variants, making it particularly effective when working with alloyed and unalloyed steels, cast materials and hard plastics. Precision Tip Geometry Minimises Entry Time and Workpiece Damage An optimised 135° tip shortens the initial contact time and improves centring on harder materials such as stainless steel and cast iron. The larger tip angle spreads cutting forces and reduces tendency to chip or pull, so the Twist Drill penetrates smoothly under proper coolant and clamping conditions. For users this means fewer re‑drills, better surface quality and lower risk of workpiece distortion when producing precise, repeatable holes. Double‑ended Design: Practical and Economical in Sheet Metal Work The double‑sided (double‑ended) configuration functions like two drills in one: when one cutting end becomes dull it can be reversed and the opposite end used immediately. This compact, short geometry is ideal for Body‑ and sheet‑metal applications, especially where rivet or thin‑plate holes are common. The bright finished surface aids chip flow and inspection, while the short length improves stability in handheld or bench drilling operations. For best results use with appropriate speeds and cooling to mitigate brittleness under heavy loads. Who Benefits and How to Use It for Long Service Life Metalworkers, body shop technicians and maintenance teams benefit from the stable cutting action and easy reversibility of this twist drill. For optimal life and hole quality, clamp the workpiece securely, use adequate cooling, and avoid excessive feed on thin sheets. The MetavCUT Body Drill performs well in drilling machines and stationary setups; due to its ground geometry it is also straightforward to re‑sharp in a controlled workshop environment if required. Choose the MetavCUT Body Drill for reliable, high‑precision sheet metal and general metal drilling — for technical advice or help selecting the right drill for your application contact METAV Werkzeuge; we provide expert consultation by e‑mail, phone and WhatsApp: info@metav-werkzeuge.com · +49 2822 7131930 · +49 170 2837271 Technical Specifications Designation: Body Drill Brand: MetavCUT SKU: 58042-FDA Diameter: 4.2 mm Overall length: 55 mm Spiral length: 13 mm Tip angle: 135° Material: HSS‑G Execution: double sided Shank execution: fully ground Colour / Finish: bright finished For use with: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Body Drill (MetavCUT) cut reliably? The MetavCUT Body Drill, a robust twist drill, is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics; its HSS‑G geometry is optimised for those harder materials and provides clean holes when used with correct speeds and coolant. What is a Twist Drill used for? A Twist Drill is primarily used for machining high‑strength materials and larger bore diameters; its form is easy to resharpen and it tolerates higher loads, which makes it suitable for demanding metalwork and large‑diameter holes. Which three drill types exist? The three common drill categories are metal drills, wood drills and stone/concrete drills.
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G Drill (Ø 4.2 mm, 135°) The Twist Drill is an extra long HSS‑G drill designed for deep metal drilling, offering a 135° point angle and a fully ground shank for precise work with drilling machines. Extra long geometry for deep, hard-to-reach holes 4.2 mm diameter for precise hole placement 135° point angle for stainless and hard steels HSS-G material, CNC-ground for precise holes Fully ground shank for excellent runout accuracy Faster deep drilling with less feed force Thanks to its extra long geometry and HSS‑G composition, this drill is optimised for deep holes in demanding materials. The ground spiral profile and DIN 1869 specification make it particularly suitable for alloyed and unalloyed steels, cast iron and non‑ferrous metals. The manufacturing method produces a bit that can drill up to 40 % faster and requires around 50 % less feed force compared with conventional HSS drills, which reduces operator fatigue and machine load and shortens cycle times. Precise holes and clean edges for reduced rework The CNC grinding process of the flutes yields very sharp cutting edges and high radial accuracy, so the tool produces precision bores with minimal burr and superior surface quality. Such precision lowers the need for secondary finishing and reduces scrap rates. Be aware that ground HSS bits can be less ductile than rolled types, so optimal results are obtained with appropriate speeds, steady clamping and cooling in more stationary or semi‑stationary setups. Built for workshop and industrial demands Engineered for use in a Drilling Machine, this extra long bit supports applications where standard lengths fall short, for example deep‑bore assemblies or hard‑to‑reach mounting positions. The 135° tip ensures efficient entry into harder materials, shortening punch‑through times and improving centring. For machinists and maintenance teams tackling thick workpieces, this design translates into fewer tool changes and more predictable cycle times. Practical handling, maintenance and cost advantages A fully ground shank contributes to low runout and stable clamping in chucks, while the bright finish aids visual inspection and corrosion resistance. The HSS‑G material can be resharpened, extending service life and making the tool economical for regular workshop use. Regular use of coolant and correct cutting parameters will maximise lifetime and maintain hole quality, offering a balance of durability and regrindability for professional applications. Strong recommendation: Choose the MetavCUT extra long Twist Drill for reliable deep‑hole metalworking — for technical advice or to confirm suitability for specific jobs, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 32042-FDA Diameter: 4.2 mm Overall length: 175 mm Spiral length: 120 mm Tip angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: extra long Shaft finish: fully ground Surface finish: bright finished Intended for: Drilling Machine Application: Drills for metal Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill from MetavCUT used? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger bore diameters; it is intended for deep holes and heavy‑duty applications. Its ground HSS geometry makes it suitable for alloyed and unalloyed steels, cast and sintered irons, non‑ferrous metals and hard plastics, and the design allows efficient cutting, good centring and high wear resistance under demanding conditions. Which three drill types exist? There are three common basic types of drills: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks.
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Kombination aus hoher Schnittschärfe, extra langer Ausführung und präziser Spitze sorgt für effiziente Tiefbohrungen in Stahl und Guss; Bestellen Sie den Artikel direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei Rückfragen. Spiralbohrer von MetavCUT, HSS‑G, extra lang Der Spiralbohrer ist ein extra langer HSS‑G Bohrer für präzise Tiefbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen Extra lange Bauform für tiefe Bohrungen Geschliffene HSS‑Geometrie für hohe Schnittschärfe DIN 1869 Tieflochspirale für sauberen Spantransport 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und Werkstattbetrieb Effiziente Leistung bei Metallbohrungen steigern Der HSS‑G geschliffene Spiralbohrer wurde entwickelt, um die Schnittleistung beim Bohren in Stahl und Guss zu erhöhen. Durch den CNC‑Schliff entstehen scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere Bohrlöcher und weniger Gratbildung bewirkt. Die Ausführung mit Tieflochspirale sorgt gleichzeitig für effektiven Spantransport bei längeren Bohrungen, wodurch Arbeitszyklen verkürzt werden und Nacharbeit reduziert wird. Tiefbohren sicher und kontrolliert ausführen Die extra lange Gesamtlänge in Verbindung mit 150 mm Spiralänge ermöglicht das Erreichen tiefer Bohrungen ohne mehrfaches Aufbohren. Dabei ist die Bohrermontage auf einer Handbohrmaschine möglich, da der Durchmesser im Standard‑Bereich liegt; für höchste Stabilität empfiehlt sich jedoch eine stationäre Aufnahme oder Magazinführung. Kühlung und moderates Vorschubverhalten verlängern die Standzeit erheblich. Materialeignung und Einsatzbereiche klar nutzen Der Bohrer eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und harte Kunststoffe. Der 135° Spitzenwinkel reduziert Anbohrwiderstand bei harten Werkstoffen und minimiert Wanderneigung beim Ansetzen. Werkstätten, Maschinenbauer und Instandhaltungsteams profitieren von der Kombination aus Durchmesser, Länge und robuster HSS‑G Ausführung. Handhabung, Pflege und Sicherheitsempfehlungen Beim Einsatz empfiehlt sich regelmäßige Kühlung, um thermische Belastung und Zähigkeitsverlust zu vermeiden. Da geschliffene Bohrer empfindlicher gegenüber Verkantung sind, verbessert eine vorgebohrte Zentrierung die Prozesssicherheit. Ersatzweise sind mehrstufige Aufbohrschritte für sehr tiefe Durchmesser zu empfehlen, um Bruchrisiken zu reduzieren. MetavCUT empfiehlt den Einsatz dieses HSS‑G Spiralbohrers für präzise Tiefbohrungen in Stahl und Guss; für Bestell‑ oder Anwendungsfragen kontaktieren Sie bitte info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 33042-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Material: HSS-G Ausführung: extra lang Schaft Ausführung: geschliffen Norm: DIN 1869 Fakten Durchmesser: 4,2 mm Gesamtlänge: 220 mm Spiralänge: 150 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Tieflochspirale Farbe: blank Für Bohrmaschine: Handbohrmaschine Geschliffen: hohe Schnittschärfe, präziser Rundlauf Eignung: legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle FAQ Für welche Materialien ist dieser Bohrer geeignet? Der Spiralbohrer von MetavCUT aus der Standard Line (HSS‑G, SKU 33042-FDA) eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe; für sehr zähe Werkstoffe ist angepasste Kühlung empfehlenswert. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, der MetavCUT Spiralbohrer HSS‑G (33042-FDA) mit 4,2 mm Durchmesser ist für Handbohrmaschinen geeignet, wobei bei tiefen Bohrungen Stabilisierung oder stationäre Führung die Prozesssicherheit erhöht. Wie tief kann man mit dem extra langen Spiralbohrer bohren? Die Gesamtlänge von 220 mm und die Spiralänge von 150 mm erlauben deutlich tiefere Bohrungen als Standardausführungen; die Tieflochspirale nach DIN 1869 unterstützt sicheren Spantransport bei solchen Anwendungen. Was bedeutet geschliffen beim Schaft und Material? Geschliffen (HSS‑G) beim Spiralbohrer von MetavCUT bedeutet, dass die Geometrie per CNC‑Schliff gefertigt wurde, was sehr scharfe Kanten, hohe Genauigkeit und saubere Bohrbilder zur Folge hat; gleichzeitig ist die Bruchneigung unter rauer Handhabung höher, daher Kühlung und ruhige Führung empfohlen.
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Drill for Drilling Machine, Ø 4.2 mm, 135°, HSS‑G, Extra‑Long, Bright Finished, DIN 1869 (MetavCUT) The Twist Drill is an extra‑long HSS‑G drill for deep metal holes, designed for use in Drilling Machines and industrial applications. Extra‑long design for deep hole drilling HSS‑G material for high cutting performance 135° point angle for hard materials Fully ground shank for high concentricity Complies with DIN 1869 for deep‑hole applications Precision and power for deep metal drilling The Twist Drill from MetavCUT is engineered as an extra‑long HSS‑G bit to reach depths that standard drills cannot. The 135° point angle reduces walking on hard materials and shortens the initial penetration time, which is especially valuable when drilling thicker plates or components made from stainless or alloyed steels. Compliance with DIN 1869 guarantees a geometry and spiral design optimised for demanding, deep‑hole applications, providing consistent results in production and workshop use. Faster machining with a ground geometry A fully ground (HSS‑G) spiral geometry yields very sharp cutting edges and excellent run‑out precision. The CNC grinding process produces a stable flute profile and clean bore surfaces; as a result, the MetavCUT bit can deliver up to 40% faster drilling and requires significantly less axial pressure compared with conventional rolled HSS drills. This translates into reduced operator fatigue and improved cycle times when used with appropriate coolant and steady fixturing. Materials and suitable applications This drill is specified for metalworking: it is suitable for legierte und unlegierte Stähle, Gray Cast Iron, Brass, Non‑Ferrous Metals and Hard Plastics within the recommended hardness limits. The extra‑long overall and working lengths make it ideal where through‑holes or deep blind holes are required and where access is limited. Use it in Drilling Machines and machine tool set‑ups that provide stable clamping and coolant flow to extend life and maintain hole quality. Handling recommendations and support For best results, secure the workpiece and use steady feed rates tailored to the material. Because ground HSS bits can be more brittle than rolled variants, avoid shock loads and always apply suitable cooling for long drilling operations. If uncertain about feeds, speeds or the correct bit for a specific alloy or thickness, METAV Werkzeuge offers comprehensive technical support and advice. Their experienced team will help choose the right tooling and operating parameters for the application. For reliable deep‑hole machining choose the MetavCUT extra‑long HSS‑G Twist Drill and request tailored machining advice from METAV Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Extra‑long) Brand: MetavCUT Diameter: 4.2 mm Point angle: 135° Execution: Extra‑long Overall length: 280 mm Spiral length: 190 mm Material: HSS‑G Shank execution: Fully ground Colour: Bright finished Model series: Standard Line Application: Drills for metal Suitable for: Drilling Machine Standard: DIN 1869 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is used primarily for drilling in metal; it is designed for deep holes and for machining high‑strength and hard materials where an extra‑long working length is required. The geometry and HSS‑G material suit alloyed and unalloyed steels, cast irons and other non‑ferrous metals. Which three drill types exist? Common drill types are metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for machining metallic materials. Why are Twist Drills point‑ground? Point grinding reduces the cross‑cut at the tip, lowering friction and required feed force. For the MetavCUT Twist Drill a ground tip improves centring and reduces radial run‑out, which results in cleaner holes and more consistent drilling under load. Can a metal Twist Drill be used in wood? A metal Twist Drill like the MetavCUT bit can be used in wood, but guidance and finish are inferior to purpose‑made wood drills. Metal drills are easier to re‑grind and have less aggressive self‑feed, so hole quality and tracking may be reduced in timber.
4.2mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 4.2 mm, 135°, Extra short, Bright finished, HSS-G, DIN 1897 by MetavCUT The Twist Drill Type N is an extra-short HSS-G metal drill designed for hand and drilling-machine use, offering increased stability and faster drilling in confined spaces. Extra-short design for higher stability HSS-G material for robust metal drilling 135° point angle for harder workpieces Cylindrical shank fits standard chucks Conforms to DIN 1897 extra-short specification Increased Precision and Faster Drilling for Metalwork The extra-short geometry of this Twist Drill improves rigidity and reduces the risk of breakage when working with thin materials or in restricted spaces. Made from HSS-G, the bit combines wear resistance with toughness, enabling up to 40% faster drilling and requiring about 50% less feed force compared with conventional HSS drills. This leads to more consistent hole quality in alloyed and unalloyed steel, cast steels and non-ferrous metals while reducing operator effort. Better Penetration in Harder Materials With a 135° point angle, this Type N Twist Drill is optimised for harder workpieces such as stainless steel and tempered materials. The flatter point reduces chipping and shortens initial contact time, so the drill centres more reliably and requires less rework. For workshops that frequently face demanding substrates, this geometry translates directly into fewer tool changes and steadier machining results. Practical Design for Hand and Angle Drills The cylindrical shank ensures universal compatibility with standard three-jaw chucks, making the bit simple to mount in typical hand or angle drilling machines. The extra-short overall length enhances torque transmission and reduces flex during manual operation, which is particularly useful when access is limited or when drilling from awkward angles. The bright finished surface eases chip evacuation and inspection. Targeted Applications and User Benefits Designed as a classic metalworking solution, the Twist Drill Type N from MetavCUT is intended for professionals and advanced hobbyists who require reliable performance on steel, cast iron, sintered materials and hard plastics. Its robustness and ease of resharpening make it a cost-effective choice for production tasks where consistent centring and longevity are priorities. Strong recommendation: For precise metal drilling tasks choose the MetavCUT Twist Drill Type N for its extra-short stability and HSS-G performance — for further technical advice or to confirm suitability for your application, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 56042-FDA Durchmesser: 4.2 mm Spitzenwinkel: 135° Typ: Type N Ausführung: extra short Farbe / Finish: Bright finished Material: HSS-G Schaftausführung: Cylindrical Gesamtlänge: 55 mm Spirallänge: 22 mm Anwendung: Drills for metal Norm: DIN 1897 Modellserie: Standard Line Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is primarily designed for metalworking; it performs well in alloyed and unalloyed steel, cast steel, sintered iron, non-ferrous metals and hard plastics, delivering reliable centring and efficient material removal. Is the MetavCUT Twist Drill Type N compatible with standard hand drills? Yes, the cylindrical shank of the MetavCUT Twist Drill Type N fits standard three-jaw chucks on most hand and angle drilling machines, enabling straightforward mounting and universal compatibility. For what is a Twist Drill used? The MetavCUT Twist Drill is mainly used for machining high-strength workpieces and larger bore diameters; its form is easy to sharpen and it withstands higher loads. Which 3 drill types exist? Common drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened? The sharpening reduces the chisel edge at the tip of the Twist Drill; by sharpening, friction forces are significantly lowered, requiring less feed force and improving centring in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood but will generally guide less well and produce a less clean hole; however, it is easier to resharpen and shows lower self-feed tendency. At what drill depths is the Twist Drill most commonly used? A through-hole is typically executed with a Twist Drill; for diameters up to 20 mm and drill depths up to 100 mm the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE steels are universally superior to standard HSS is not correct; when choosing between HSS and HSSE, evaluate whether working conditions justify the higher initial cost of HSSE for your specific tasks.
4.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — HSS‑G, 4.2 mm, 135°, short, bright finished, fully ground shaft, DIN 338 The Twist Drill short Type N for Drilling Machines is engineered for precise metalworking, offering high stability and fast penetration in hardened materials. Short HSS‑G drill for high stability 4.2 mm diameter with 135° point angle Fully ground shank for secure clamping Conforms to DIN 338 for metalworking Optimised for drilling machines and hand drills Faster drilling performance with less feed force Designed for efficiency, the short HSS‑G construction delivers up to 40% faster drilling while requiring 50% less thrust compared with conventional HSS drills. The combination of HSS‑G material and a ground flute geometry reduces friction and heat build‑up, so holes are produced more quickly and with lower machine load. This makes the tool particularly effective for repetitive metalworking tasks where cycle time and operator effort matter. Built for stability and accuracy in hard materials The reduced overhang of the short design increases rigidity and minimises deflection during cutting, resulting in straighter holes and improved tolerances. With a 135° point angle the drill resists wandering and is optimised for tougher materials such as stainless steel and hardened alloys. The Type N normal spiral offers a reliable balance between chip evacuation and cutting edge strength for standard metalworking applications. Secure clamping and machine compatibility A fully ground shaft ensures concentricity and a snug fit in chucks, improving run‑out and enabling consistent performance on both bench and portable Drilling Machines. The overall length of 75 mm with a spiral length of 43 mm provides a compact, robust working length that suits confined setups and reduces vibration. These mechanical features support longer tool life and more predictable results in daily workshop use. Simple technical background explained For users less familiar with tooling: HSS‑G stands for ground high‑speed steel, which combines toughness with a sharper cutting geometry after grinding. DIN 338 specifies short twist drills with cylindrical shanks and helps you compare dimensions and tolerances across manufacturers. The 135° point angle indicates a flatter tip suited to harder metals and reduced drilling start time compared with steeper tips. Who benefits most from this drill Workshops, maintenance technicians and metal fabricators value the combination of speed, stability and durability offered by this short HSS‑G Type N drill. It is particularly suited to tasks where precision in steel, castings and non‑ferrous metals is required and where a compact, reliable tool reduces rework and tool changes. We recommend MetavCUT Twist Drill Type N with HSS‑G for demanding metalworking tasks — for further technical advice or to confirm compatibility with your application contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel. +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 27042-FDA Diameter: 4.2 mm Point angle: 135° Type: Type N Execution: short Finish/Colour: bright finished Shaft design: fully ground Spiral length: 43 mm Overall length: 75 mm Material: HSS‑G Standard: DIN 338 Application: Drills for metal Series: Basic Line For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The Twist Drill from MetavCUT, Type N, is primarily used for machining high‑strength materials and larger drill diameters; it is well suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics, offering easy regrinding and reliable performance under heavier loads. Which three drill types exist? The main categories are metal drills (often HSS), wood drills, and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for metalworking applications.
4.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 4.2 mm, 135° point angle, short, bright finished, HSS‑G, DIN 338 The Twist Drill Type N is a short HSS‑G metal drill designed for precision drilling in demanding materials with a 135° point angle and a fully ground shank for high concentricity. Short design for improved stability HSS‑G geometry for precise metalworking 135° point angle for hard material entry Fully ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Precision Material and Cutting Performance The short HSS‑G construction of this twist drill combines sharp cutting edges with material hardness optimised for metalworking. A ground flute geometry results in clean holes and high roundness, while the shorter overhang reduces vibration and bending. For users working with alloyed and unalloyed steel, cast steel, spheroidal graphite iron, non‑ferrous metals and hard plastics, this design translates into higher drilling speed and reduced feed force compared with conventional HSS tools. HSS‑G (ground High Speed Steel) means edges are manufactured by CNC grinding for better sharpness and hole quality. Designed for Demanding Metalwork Engineered as a Type N (normal spiral) twist drill, the 135° point angle facilitates controlled entry into harder workpieces and reduces the tendency to wander on start. This geometry shortens initial penetration time and improves centring when commencing a bore. Because the tool is a short variant, it is particularly suitable for stationary and hand‑guided drilling where stability and accuracy are critical. The cutter is therefore recommended for precision shops and maintenance tasks that require consistently round, burr‑reduced holes. Handling, Compatibility and Practical Advantages With an Overall Length of 75 mm and a Spiral Length of 43 mm, the short profile ensures a stiff setup when mounted in drill chucks. The fully ground cylindrical shank aids in secure clamping and precise run‑out on collets or chucks used in Drilling Machines and hand drills. Users will find less chatter and improved surface finish, which reduces subsequent rework. For laypersons: a fully ground shank means the shaft and flute were machined to exact tolerances rather than rolled, giving better balance and a sharper cutting geometry. Who Benefits Most from This Tool This short twist drill is aimed at professionals and advanced hobbyists who bore metals requiring repeatable accuracy—toolmakers, maintenance technicians and fabrication shops. Because the drill suits harder materials, it is less ideal for very soft woods where specialised wood bits give cleaner guidance; however, its robustness makes it versatile for many workshop applications. If precise, repeatable metal holes are your priority, this product meets those needs through focused engineering rather than general‑purpose compromise. Choose the MetavCUT Twist Drill Type N for precise metalworking and request expert technical advice from METAV Werkzeuge — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and recommendations Designation: Twist Drill (Short Twist Drill) Brand: MetavCUT SKU: 45042-FDA Diameter: 4.2 mm Point angle: 135° Type: Type N Material: HSS‑G Finish/Colour: Bright finished Execution: Short (kurz) Shank execution: Fully ground Spiral length: 43 mm Overall length: 75 mm For drilling machine: Drilling Machine / Hand Drill compatible Application: Drills for Metal Standard: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill (MetavCUT Type N) and when should it be chosen? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters; its short design and ground flutes make it suitable for precision work in steel, cast alloys and hard plastics where stability and clean hole quality are required. Which three drill types exist and how does the MetavCUT Twist Drill fit in? The three common drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill family and is optimised for metalworking rather than for timber or masonry applications.
4.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Profitieren Sie von der Kombination aus HSS-G Schneidleistung, kurzer Ausführung und 135° Spitzenwinkel für effiziente Metallbohrungen; die erhöhte Stabilität reduziert Ausschuss und Nacharbeit. Bestellen Sie den Bohrer bequem über Metav oder nutzen Sie unsere technische Beratung bei Bedarf. Spiralbohrer von MetavCUT (Kurzausführung, HSS-G) Der Spiralbohrer von MetavCUT ist ein kurzer, geschliffener HSS-G Bohrer nach DIN 338 für präzise Bohrungen in legierten und unlegierten Stählen sowie Gusseisen. Kurze Ausführung für höhere Stabilität Geschliffen HSS-G für saubere Bohrbilder 135° Spitzenwinkel für harte Werkstoffe DIN 338 Konformität, Zylinderschaft Geeignet für Handbohrmaschine und stationäre Maschine Hohe Stabilität durch kurze Auskraglänge Die kurze Ausführung reduziert die Auskraglänge und damit das Biege- und Vibrationsempfinden beim Bohren. Das führt zu präziseren Bohrungen und geringerer Werkzeugbelastung, besonders bei harten Werkstoffen wie legiertem Stahl. Anwender profitieren von weniger Nacharbeit und längeren Werkzeugstandzeiten. Schnelleres Eindringen mit geschliffener Geometrie Die geschliffene Schaftgeometrie (HSS-G) sorgt für sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit. Dadurch ist ein bis zu 40 % schnelleres Bohren möglich bei gleichzeitig deutlich reduzierter Anpresskraft. Das Ergebnis sind sauberere Bohrlochkanten und weniger Gratbildung. Optimale Spitze für harte Materialien Der 135° Spitzenwinkel ist optimal auf harte Werkstoffe abgestimmt und reduziert das Auswandern beim Anbohren. Der größere Winkel verkürzt die Anbohrzeit und verteilt die Schnittkräfte, was insbesondere bei Edelstahl und Temperguss zu einem zuverlässigeren Prozess führt. Einsatzbereiche und Maschinenkompatibilität Die kurze Ausführung eignet sich sowohl für stationäre Säulenbohrmaschinen als auch für leistungsfähige Handbohrmaschinen mit Zylinderschaftaufnahme. Typische Anwendungen sind Maschinenbau, Instandsetzung und präzise Werkstattarbeiten an Stahl, Guss und Nichteisenmetallen. Materialwahl und Verarbeitungsfolge Der Bohrer ist aus HSS-G (Schnellarbeitsstahl, geschliffen) gefertigt und wird nach DIN 338 als Kurzspiralbohrer klassifiziert. Die geschliffene Ausführung bietet höhere Präzision; für sehr tiefe oder zähe Materialien sind abgestimmte Kühlschmierstoffe und Vorbohrstrategien zu empfehlen. Zielgruppe und Einsatzempfehlung Entwickelt für professionelle Anwender im Handwerk und in der Industrie, die Wert auf Wiederholgenauigkeit und Standzeit legen. Die Profi Line Ausführung richtet sich an Betriebe, die regelmäßig Metall bearbeiten und dabei Zuverlässigkeit mit Effizienz verbinden möchten. Empfehlung: Für anspruchsvolle Metallbohrungen die Profi Line Ausführung von MetavCUT wählen; für Beschaffung oder technische Rückfragen steht Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung. Produktmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 48042-FDA Marke: MetavCUT Serie: Profi Line Norm: DIN 338 Fakten Durchmesser: 4,2 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen (voll geschliffener Zylinderschaft) Ausführung: kurz Typ: Typ N (Normalspirale) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine / stationäre Maschine FAQ Welche Materialien sind für den MetavCUT Spiralbohrer Profi Line geeignet? Der MetavCUT Spiralbohrer Profi Line aus HSS-G eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Ist der Spiralbohrer für Handgeführte Geräte zuverlässig? Ja, die kurze Ausführung des Spiralbohrers reduziert die Auskraglänge und verbessert die Standfestigkeit, sodass er für leistungsfähige Handbohrmaschine und stationäre Maschinen gleichermaßen geeignet ist. Was bedeutet HSS-G geschliffen beim Spiralbohrer? HSS-G steht für Schnellarbeitsstahl, geschliffen; das Verfahren erzeugt sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was präzise Bohrungen in harten Werkstoffen fördert. Wann ist ein 135° Spitzenwinkel vorteilhaft? Der 135° Spitzenwinkel ist besonders vorteilhaft beim Bohren in harten Werkstoffen wie Edelstahl oder Temperguss, da er die Anbohrzeit verkürzt und das Wandern beim Anbohren minimiert. Welche Norm beschreibt diese Ausführung und warum ist das wichtig? Die Norm DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft und gibt Ausführungen sowie Fertigungsverfahren vor; das sichert Kompatibilität und Reproduzierbarkeit bei industriellen Anwendungen.
4.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Nutzen Sie die Kombination aus TIN-Beschichtung und geschliffener HSS-G-Geometrie für schnellere Bohrfortschritte und höhere Standzeit. Die kurze Ausführung reduziert Auslenkung und verbessert die Präzision bei Hand- und stationären Anwendungen. Bestellen Sie den Spiralbohrer von MetavCUT direkt über Metav oder fragen Sie bei Bedarf unsere technische Beratung an. Spiralbohrer von MetavCUT Basic Line Spiralbohrer kurzausführung für präzises Metallbohren in Werkstatt und Montage Spiralbohrer von MetavCUT Basic Line TIN-beschichtung reduziert Reibung und Verschleiß HSS-G geschliffen für hohe Rundlaufgenauigkeit Kürzere Ausführung für mehr Stabilität und Präzision Spitzenwinkel 118° ideal für gängige Metalle Präzision und Standfestigkeit beim Metallbohren Die kurze Bauform dieses Spiralbohrers sorgt für deutlich verringerte Auskraglänge und damit für mehr Stabilität beim Bohren in Metall. Durch die reduzierte Neigung zum Verbiegen werden Bohrabweichungen minimiert, was saubere Bohrbilder und gleichmäßige Toleranzen fördert. Für alltägliche Werkstattarbeiten und den Einsatz an Handbohrmaschinen ist die Kombination aus kurzer Gesamtlänge und geschliffener Schaftgeometrie optimal. Effizienz durch Beschichtung und geschliffene Geometrie Die TIN-Beschichtung verringert Reibung und Hitzeentwicklung und verlängert so die Lebensdauer des Werkzeugs. Der geschliffene HSS-Grundkörper (HSS-G) erzeugt scharfe Schneidkanten, die ein bis zu 40 % schnelleres Bohren und etwa 50 % geringeren Anpressdruck ermöglichen. Die Norm DIN 338 dokumentiert die Ausführung als kurzen Spiralbohrer mit Zylinderschaft und garantiert reproduzierbare Fertigungsmerkmale. Vielseitige Materialverträglichkeit für metallische Werkstoffe Der Bohrer ist geeignet für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer, Bronze und Neusilber und ebenso für Hartkunststoff. Durch den Spitzenwinkel von 118° lässt sich der Bohrer gut in gängige Metalle einführen, während die geschliffene Geometrie saubere Spanabfuhr und präzise Bohrungen unterstützt. Bei geeigneter Kühlung bleibt die Schneide länger scharf und die Bohrqualität stabil. Praxisnahe Hinweise für sicheren Einsatz und maximale Standzeit Für präzise Arbeiten empfiehlt sich das Anpunkten mit einem Zentrierbohrer, insbesondere bei dünnen oder leicht gewölbten Werkstücken. Bei Bohrungen im Bereich von 2 mm bis 13 mm kann in der Regel direkt gebohrt werden; für höhere Genauigkeit ist das Vorbohren hilfreich. Kühlmittel reduziert Verschleiß und sorgt für konstante Schnittbedingungen. Die kürzere Ausführung erlaubt weniger Seitenkräfte, wodurch gerade bei Handgebrauch das Bruchrisiko sinkt. Die Empfehlung: Den MetavCUT Basic Line Spiralbohrer mit TIN-Beschichtung und geschliffener HSS-G-Geometrie wegen seiner hohen Präzision und Standzeit direkt bei Metav anfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 28042-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Ausführung: kurz Fakten Durchmesser: 4,2 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Schaftausführung: geschliffen Beschichtung: TIN-beschichtet (Titan-Nitrid) Norm: DIN 338 Einsatzbereich: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine SKU: 28042-FDA FAQ Wie geeignet ist dieser Bohrer für Handbohrmaschinen? Der MetavCUT Basic Line Spiralbohrer SKU 28042-FDA ist durch die kurze Ausführung und geschliffene Schaftgeometrie gut für Handbohrmaschinen geeignet, da die verringerte Auskraglänge die Stabilität erhöht und das Risiko von Verkantungen reduziert. Für welche Materialien kann dieser Spiralbohrer eingesetzt werden? Der Spiralbohrer von MetavCUT eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle und Hartkunststoff; bei harten Werkstoffen wird Kühlung empfohlen, um Standzeit und Bohrbild zu optimieren. Muss vorgebohrt werden, wenn hohe Präzision verlangt wird? Bei hoher Präzision empfiehlt sich ein Anpunktben mit einem Zentrierbohrer; allgemein kann der 4,2‑mm-Bohrer im Bereich 2–13 mm direkt verwendet werden, für passgenaue Bohrungen ist Vorbohren vorteilhaft. Kann der HSS-G Spiralbohrer nachgeschliffen werden? Geschliffene HSS-Bohrer wie dieser lassen sich grundsätzlich nachschleifen; zu beachten sind dabei die korrekte Geometrie und die Einhaltung des Spitzenwinkels, damit Präzision und Rundlauf erhalten bleiben. Was unterscheidet geschliffene von gewalzten Spiralbohrern? Geschliffene Bohrer (HSS-G) bieten schärfere Kanten und höhere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern in Metall führt; sie können jedoch spröder sein und profitieren von stationärem Einsatz und Kühlung für längere Lebensdauer.
4.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Stabile Kurz-Ausführung und TiN-Beschichtung sorgen für hohe Präzision und längere Standzeit; die geschliffene HSS-G-Geometrie ermöglicht deutlich schnelleres Bohren bei geringerem Anpressdruck. Bestellen Sie den Spiralbohrer von MetavCUT direkt über Metav oder fragen Sie unsere Beratung an. Spiralbohrer von MetavCUT (HSS-G, Typ N, SKU 46042-FDA) Der kurze HSS-G Spiralbohrer für präzise Metallbohrungen an Handbohrmaschinen und stationären Maschinen Kurze Ausführung für höhere Stabilität und weniger Vibrationen TiN-Beschichtung reduziert Reibung und erhöht Standzeit Geschliffene Geometrie für schnellere Schnittgeschwindigkeit 135° Spitzenwinkel für härtere Werkstoffe Geeignet für Handbohrmaschine und Werkstattbetrieb Höhere Stabilität durch kurze Bauweise und geschliffene Ausführung Dank der Kurz-Ausführung verringert sich die Auskraglänge deutlich, wodurch Verwölbung und Schwingungen minimiert werden. Die geschliffene Ausführung liefert eine sehr scharfe Schneidegeometrie und somit saubere Bohrlöcher bei Metall. Für Anwender bedeutet das weniger Nacharbeit und konstantere Passungen bei Serien- und Einzelteilen. TiN-Beschichtung reduziert Verschleiß und Verbesserung der Bearbeitungsleistung Die TiN-Beschichtung (Titan-Nitrid) sorgt für eine geringere Reibung an der Schnittzone und eine reduzierte Wärmeentwicklung. In Kombination mit geeigneter Kühlschmierung führt das zu deutlich längerer Standzeit und zu konstanteren Ergebnissen bei legierten und unlegierten Stählen sowie Nichteisenmetallen. Anwender profitieren von seltenerem Werkzeugwechsel und höherer Produktivität. Vielseitiger Einsatzbereich für Werkstatt und Montage Der Bohrer passt in den Standard-Bereich für Bohrdurchmesser und ist daher ideal für Werkstatt, Montage und DIY-Anwendungen in Metall. Er eignet sich für dünne bis mitteldicke Bleche, Profile und viele Stahlsorten sowie für Kupfer, Bronze und Hartkunststoffe. Bei sehr feinen Präzisionsarbeiten oder extrem gehärteten Stählen sind speziellere Werkzeuge empfehlenswert. Normgerechte Fertigung und praxisnahe Geometrie für Metall Herstellergerecht gefertigt nach DIN 338, Typ N, bietet der Bohrer eine bewährte Metallgeometrie mit 135° Spitzenwinkel, die das Anbohren von härteren Werkstoffen erleichtert. Durch den geschliffenen Zylinderschaft und die präzise Spiralgeometrie lässt sich bis zu 40 % schneller bohren bei 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS-Werkzeugen, was Ergonomie und Effizienz am Arbeitsplatz verbessert. Empfehlung: Setzen Sie auf den robusten Spiralbohrer von MetavCUT für zuverlässige Metallbearbeitung und bestellen Sie über Metav oder kontaktieren Sie unsere technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 46042-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Daten Durchmesser: 4,2 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Schaft: geschliffen (Zylinderschaft) Beschichtung: TIN-beschichtet (Titan-Nitrid) Ausführung: kurz Typ: Typ N Einsatz: Handbohrmaschine Verpackungseinheit: 10 FAQ Für welche Materialien ist dieser Spiralbohrer geeignet? Der Spiralbohrer von MetavCUT (HSS-G, Typ N, SKU 46042-FDA) eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze und Hartkunststoff. Warum ist die kurze Ausführung vorteilhaft? Die kurze Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität und Rundlaufgenauigkeit; das führt zu präziseren Bohrungen und weniger Bruchrisiko bei stationären und handgeführten Anwendungen. Welche Vorteile bietet die TiN-Beschichtung? Die TiN-Beschichtung verringert Reibung und Wärmeentwicklung, erhöht die Standzeit des Werkzeugs und verbessert die Schnittbedingungen insbesondere bei Metallbearbeitung in Kombination mit Kühlung. Ist der Bohrer für die Handbohrmaschine geeignet? Ja, der Bohrer ist für Handbohrmaschine geeignet und wurde für den Einsatz in Werkstatt und Montage konzipiert, wobei bei höheren Anforderungen an Präzision stationäre Maschinen empfohlen werden. Was bedeutet DIN 338 und geschliffen in diesem Kontext? DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft; „geschliffen“ bedeutet, dass die Schneidgeometrie durch Schleifen hergestellt wurde, was sehr scharfe Kanten und hohe Rundlaufgenauigkeit ermöglicht.
4.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Introducing the Twist Drill — short Type N, Ø 4.2 mm, 135°, TiN-coated, HSS-G, DIN 338 The Twist Drill short Type N for Drilling Machine delivers precision metal drilling with a TiN coating for extended tool life. Twist Drill Type N, Ø 4.2 mm 135° tip for harder materials TiN-coated HSS-G for extended tool life Short design for higher stability and precision Fully ground shank for faster, cleaner drilling Longer life through advanced coating and material The short HSS-G construction combined with a TiN-coated surface reduces friction and wear during Metal Drilling, resulting in a noticeably longer service life compared with uncoated tools. The Titanium Nitride layer acts as a thermal and abrasive barrier, so the tool maintains cutting performance when working on alloyed and unalloyed Steel, Cast Iron, Copper, Bronze and engineering plastics. This means fewer tool changes and more uptime in workshops and production environments. Short geometry for improved accuracy and stability A reduced overhang from the short overall length and the 43 mm spiral length increases rigidity and minimises bending, producing cleaner, more concentric holes in demanding applications. The fully ground flute geometry enables up to 40 % faster drilling with 50 % less required thrust compared to conventional HSS drills, which translates into faster cycle times and lower operator effort when machining hard materials. Designed for metalworking and demanding tasks The Type N normal spiral and a 135° tip angle are optimised for cutting into harder materials such as Stainless Steel and Tempered components; the blunter tip shortens initial penetration time and improves centring on metal surfaces. Manufactured to DIN 338 for short twist drills and with CNC grinding of the flutes, the tool offers sharp cutting edges and high running accuracy—ideal for stationary and powered Drilling Machines when combined with adequate cooling to avoid thermal stress. Who benefits and how to get best results Workshops, maintenance teams and professional machinists benefit from the combination of short design and TiN coating, especially for precise bore holes in metals where repeatability matters. Best practice: secure the workpiece, use suitable coolant for metalworking, and select appropriate spindle speeds for a 4.2 mm diameter to preserve tool life and hole quality. The Profi Line execution emphasises performance and repeatable results in series production and repair tasks. Strong recommendation: Choose MetavCUT’s short TiN-coated HSS-G Twist Drill for precision metalworking — for expert advice or to confirm suitability for a specific job, contact METAV Werkzeuge; Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Clear technical data for workshop planning Designation: Twist Drill (short Type N) Brand: MetavCUT Diameter: 4.2 mm Overall length: 75 mm Spiral length: 43 mm Tip angle: 135° Material: HSS-G Coating: TiN-coated Shank execution: fully ground Execution: short Norm: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT (Type N Twist Drill) mainly used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high-strength materials and larger drilling diameters; its geometry and coating make it suitable for Steel, Cast Iron and non-ferrous Metals. The short design and TiN coating enable durability under heavy load and the form is easy to re-sharpen while maintaining stability for demanding tasks. Which three drill types exist and where does the MetavCUT Twist Drill fit? The three common drill types are Metal Drills, Wood Drills and Masonry/Concrete Drills. The MetavCUT Twist Drill belongs to the Metal Drill category (Type N normal spiral) and is optimised for metallic materials rather than timber or masonry.
4.2mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill (Spiralbohrer) — HSS-G long, 4.2 mm, 135° The Twist Drill (Spiralbohrer) is a long HSS-G drill bit designed for deep metal drilling with DIN 340 specification, ideal for use with a Drilling Machine. Long HSS-G design for deep holes Precise 4.2 mm diameter for accurate results 135° tip angle for harder materials Fully ground shank for high runout accuracy Bright finished surface for reduced adhesion High performance through HSS-G construction Designed as a long execution according to DIN 340, this HSS-G tool combines endurance and cutting efficiency. The fully ground geometry ensures sharp cutting edges and a high degree of roundness, which supports up to 40% faster drilling and requires 50% less feed force compared with conventional rolled HSS bits. This results in cleaner holes and less operator fatigue when working with legated and unlegated steels, cast materials and hard plastics. Deeper holes made accessible and precise With an overall length of 119 mm and a spiral length of 78 mm, the bit enables drilling in recessed or hard-to-access positions where standard lengths fall short. The 135° point angle improves performance on tougher materials by reducing initial chipping and improving centering, so fewer pilot operations are needed. This geometry is particularly suited to stainless and tempered steels where a flatter point reduces wander. Accurate handling and machine compatibility The ground shank and bright finish give excellent seating and reduced friction when clamped in chucks of a Drilling Machine. Because the bit is ground (HSS-G), it provides superior concentricity and hole quality; however, it is comparatively more brittle than rolled types and benefits from steady feed, proper cooling and preferably stationary machine use for maximum service life. The bit is engineered for routine workshop use and professional metalworking environments. Who benefits most from this design Production shops, maintenance teams and precision metalworkers will appreciate the combination of long reach and HSS-G performance for demanding tasks such as bushings, deep through-holes and repair work in cast and sintered parts. The tool is a reliable choice when deep, accurate holes in steels and non-ferrous metals are required and when regrinding capability is desirable for tool life extension. Strong recommendation: Choose the MetavCUT long HSS‑G Twist Drill for demanding metal drilling tasks and contact METAV Werkzeuge for expert, personalised advice and technical support — Email: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 53042-FDA Durchmesser: 4.2 mm Spitzenwinkel: 135° Material: HSS-G Norm: DIN 340 Ausführung: long Gesamtlänge: 119 mm Spirallänge: 78 mm Schaft Ausführung: fully ground Farbe / Finish: bright finished Für Bohrmaschine: Drilling Machine Modellserie: Standard Line Anwendungen: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill (Spiralbohrer) used? The Twist Drill from MetavCUT is primarily applied to machining high-strength materials and large drill diameters; its long design supports deeper holes and working in hard-to-reach positions. The ground form is easy to re-sharpen and withstands considerable loads, making it suitable for tougher metalworking tasks. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for steels and similar materials. Why are Twist Drills re-sharpened (ausgespitzt)? Re-sharpening reduces the cross-edge at the tip, which lowers friction and thus requires less feed force; for the MetavCUT Twist Drill this improves centring and reduces cutting forces during the initial penetration into the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill such as the MetavCUT HSS-G Twist Drill can be used in wood, but guidance is poorer and the hole finish is not as clean as with a dedicated wood bit; metal drills are easier to re-sharpen and tend to have less self-feeding action in timber. For which drilling depths is the Twist Drill most used? A solid through hole is typically executed with a Twist Drill; for diameters up to about 20 mm and depths up to 100 mm the Twist Drill is the most frequently used tool, and the MetavCUT long execution is well suited for deeper bores. Is HSS or HSSE better? The common assumption that HSSE steels are always superior to HSS is not universally true. When choosing, evaluate whether the working conditions justify the higher cost of HSSE; the MetavCUT HSS-G long drill offers excellent performance for many standard applications. Are you unsure whether this tool meets your requirements or need additional technical data? METAV Werkzeuge provides comprehensive, expert consultation — Email: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271
4.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 4.3 mm, 118° | Short HSS, Black, DIN 338 The Twist Drill is a short Type N drill designed for metalworking, offering precise 4.3 mm holes with a 118° point angle for use in Drilling Machines and hand drills. Short HSS construction for stable drilling Conforms to DIN 338 for short twist drills 118° point angle for reliable centring Type N normal spiral optimised for metal Suitable for Drilling Machines and hand-held use High precision and efficiency for metalworking tasks The short HSS design delivers increased stability and reduced runout when working with metal. With a diameter of 4.3 mm and a 118° point angle, this short twist drill requires lower feed forces and centres reliably on typical metal surfaces. Its Type N normal spiral geometry is expressly intended for drilling steel, cast iron and other metallic materials, ensuring a clean hole with minimal burr formation. This combination of short length and hardened construction reduces the tendency to bend, which increases repeatable accuracy in series work. Robust performance where tool life matters Manufactured to the DIN 338 specification for short twist drills with cylindrical shank, this drill is suitable for conventional machining tasks on rotating tool-holders. The roll-formed HSS option offers improved elasticity and a lower risk of breakage for smaller diameters, making the tool resilient under normal workshop loads. For everyday metal-drilling operations, the material choice HSS (High Speed Steel) means reliable wear behaviour and straightforward resharpening when required, so the tool remains serviceable for longer. Easy handling and clear application guidance Because the drill is a short execution, it provides high rigidity and easier handling for both stationary Drilling Machines and portable hand machines. The Type N geometry is not optimised for very soft materials, but it performs consistently when used for its intended purpose: Drills for Metal. Users benefit from simpler set-up, stable cutting performance and predictable chip evacuation in typical workshop environments. For operators less familiar with drill geometries: a 118° point angle is generally preferable for softer metals and improves centring on curved or uneven surfaces. Practical maintenance and recommended use The roll-formed HSS variant reduces the chance of catastrophic breakage when drilling holes under 6 mm diameter; this makes upkeep and resharpening less critical for routine use. Resharpening a short twist drill restores the cutting lips while preserving the correct point angle, keeping the tool precise. When selecting drilling parameters, match speed and feed to the workpiece material and ensure secure clamping to exploit the drill’s stiffness and to prevent chatter or premature wear. Strong recommendation: For precision metal drilling choose the MetavCUT Twist Drill Type N with HSS short execution — METAV Werkzeuge offers expert advice and technical support by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40043-FDA Diameter: 4.3 mm Spiral length: 43 mm Overall length: 80 mm Point angle: 118° Type: Type N Execution: short Material: HSS Colour: black Standard: DIN 338 Application: Drills for Metal For machine: Drilling Machine / Hand Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is intended primarily for metalworking; it is best used for drilling alloyed and unalloyed steel, cast iron and other metallic materials where a normal spiral geometry provides reliable cutting and chip removal. Can the MetavCUT Twist Drill be used in a hand-held drill? Yes, the MetavCUT Twist Drill with short execution and HSS material is suitable for both Drilling Machines and quality hand-held drills, offering improved rigidity and easier handling compared with longer designs. For what is a Twist Drill used? Twist Drills are mainly applied to the machining of high-strength materials and larger drill diameters; their form is easy to resharpen and they withstand higher loads. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are twist drills pointed? Pointing reduces the cross-cut at the tip of the twist drill. By pointing, friction forces are significantly lowered so that less feed force is necessary and the drill tip centres better in the workpiece. Can a twist drill be used to drill wood? A metal drill can also be used in wood; however, guidance is poorer and the result is not as clean. Metal drills are easier to resharpen and have a lower tendency to self-feed. For which drilling depths is the twist drill mostly used? A through-hole in solid material is performed with a twist drill. For diameters up to 20 mm and drilling depths up to 100 mm, the twist drill is the most commonly used tool. What is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to standard HSS steels is incorrect. When choosing, consider whether the working conditions justify the higher initial cost of HSSE.
4.3mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Type N) — MetavCUT; 4.3 mm; Short; HSS‑E; 135° point angle; 5% cobalt‑alloyed; Fully Ground; DIN 338 The Twist Drill (Type N) from MetavCUT is a short HSS‑E metal drill designed for precise, stable drilling in harder materials on drilling machines. Short design for higher rigidity and precision 4.3 mm diameter for precise metal holes 135° point angle for harder materials HSS‑E with 5% cobalt for enhanced durability Fully ground shank and DIN 338 conformity Precise holes through higher rigidity and stability The Twist Drill with a short design reduces the out‑of‑chuck overhang, resulting in noticeably less vibration and improved concentricity when machining metal. With a nominal 4.3 mm diameter and compact 47 mm spiral length, this drill delivers higher stability compared with longer variants, which directly benefits hole quality and repeatability. For workshop environments where accuracy matters, the reduced tendency to bend means fewer rejects and a steadier process, especially when using a dedicated Drilling Machine. Material choice and tip geometry tailored for hard materials Constructed from HSS‑E with 5% cobalt, the tool offers improved red hardness and wear resistance for demanding cuts. The 135° point angle is specifically chosen to ease entry and reduce chipping when working with harder steels and alloyed materials, while the Type N normal spiral remains the proven choice for general metalworking. Conformity to DIN 338 signals compatibility with industry expectations for short, cylindrical shank drills, and helps you match the right tool to the machining task. Fully ground geometry for accurate, clean drilling A fully ground flute and point geometry produce sharp cutting edges and excellent runout behaviour, resulting in clean bores and precise diameters. Grinding (CNC‑grind) creates the typical HSS‑G characteristics: high edge sharpness and excellent concentricity. Note that ground drills can be more brittle than rolled alternatives and benefit from correct clamping, moderate cutting parameters and adequate cooling to avoid premature fracture. The short variant reduces these risks further by minimising leverage on the cutting edge. Application focus, user guidance and workshop compatibility Designed primarily as a Drill for Metal, this short HSS‑E twist drill is ideal for workshop machinists, toolrooms and maintenance departments that require repeatable, accurate holes in alloyed and unalloyed steels, cast iron, non‑ferrous metals and plastics. The tool is best used in stationary or portable drilling machines with secure chucking and appropriate coolant. For customers unsure about cutting speeds, feeds or suitability for a specific material, METAV Werkzeuge offers competent support and technical advice to match the tool to the job. Strongly recommend MetavCUT Twist Drill Type N for precision metalworking — for expert guidance and ordering assistance contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47043-FDA Diameter: 4.3 mm Spiral length: 47 mm Overall length: 80 mm Point angle: 135° Type: Type N Version: short Shaft execution: fully ground Material: HSS‑E Colour: 5% cobalt-alloyed For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Norm: DIN 338 Execution: kurz Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill Type N is mainly applied when machining high‑strength materials and larger drilling diameters; its shape allows relatively easy re‑sharpening and it withstands higher loads, making it suitable for robust metalworking tasks. Which three drill types are there? Typical categories are metal drills, wood drills and stone/concrete drills, and the MetavCUT Twist Drill is positioned within the metal drill group for machining metals. Why are Twist Drills point‑sharpened? The point sharpening reduces the cross‑cut at the tip, which lowers friction and therefore requires less feed force; with the MetavCUT Twist Drill this also improves centring of the tip in the workpiece. Can you use a metal drill for wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance is poorer and hole quality is usually inferior; the advantage is easier re‑grinding and less tendency for self‑feeding, but expect a rougher finish. At what drilling depths is the Twist Drill most commonly used? A through‑hole is typically made with a Twist Drill; for diameters up to about 20 mm and depths up to approximately 100 mm the Twist Drill is the most frequently used tool, and the MetavCUT short variant is optimised for stability at such depths. What is better, HSS or HSSE? The common belief that HSSE steels are always superior to HSS is not universally correct; when choosing a MetavCUT Twist Drill, evaluate whether the specific working conditions justify a higher‑cost HSSE tool, since HSS‑E may already provide the required performance.
4.3mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Twist Drill) — Double‑Ended HSS‑G, Ø 4.3 mm, 135° The Body Drill is a double‑ended Twist Drill from MetavCUT designed for precise metalworking and drilling machines, ideal for short, stable holes in sheet metal and chassis applications. Double‑ended design for two usable tips HSS‑G material for sharp, precise holes 135° tip angle for harder materials Fully ground shank for high concentricity Bright finished surface for easy chip evacuation Faster, more accurate metal drilling with a ground HSS design The Body Drill delivers a measurable productivity advantage: its HSS‑G construction and fully ground Flute Geometry enable up to 40% faster drilling with significantly lower axial force compared to conventional HSS bits. This makes shorter cycle times and reduced operator fatigue achievable, particularly when processing Alloyed and Unalloyed Steel. The 135° Tip Angle reduces chatter when penetrating harder materials, improving Hole Quality and prolonging tool life. Stable double‑ended format for workshop efficiency A Double‑Ended or double‑sided configuration means the tool functions like two drills in one: when one tip is worn, simply reverse the bit to use the other end. This design is especially valuable in high‑throughput sheet‑metal and chassis work where quick tip changes reduce downtime. The bright finished surface aids Chip Evacuation while the short overall length contributes to rigidity and better axial control during drilling. Clear suitability and handling recommendations for users This Twist Drill is specified for metalworking tasks and suits both stationary Drilling Machines and robust hand drills when used with proper clamping and coolant. For best results in Stainless Steel and other hard alloys, maintain steady spindle speed, use cutting fluid, and avoid excessive pecking; these measures preserve the HSS‑G cutting edges and help achieve round, burr‑reduced holes. Operators seeking repeatable precision will appreciate the high Round‑Run Accuracy of the fully ground Shank. Sustainable use, lifecycle and support from METAV Werkzeuge Choosing a durable ground HSS tool reduces consumable turnover and scrap from poor holes, supporting more efficient manufacturing practices. For technical questions about feed rates, speeds or suitable coolant for specific alloys, METAV Werkzeuge offers comprehensive advice and support tailored to your application. Their guidance helps ensure safe, optimal use of the Body Drill and maximises service life. Strong recommendation: For precise chassis and sheet‑metal work, choose MetavCUT’s Body Drill and contact METAV Werkzeuge for expert application support at info@metav-werkzeuge.com or +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Body Drill / Karosseriebohrer Brand: MetavCUT SKU: 58043-FDA Material: HSS‑G (ground high‑speed steel) Diameter: 4.3 mm Spiral (Flute) Length: 13 mm Overall Length: 55 mm Tip Angle: 135° Execution: Double‑ended (double‑sided) Shank Finish: Fully ground Colour / Surface: Bright finished For Use With: Drilling Machine Model Series: Standard Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Body Drill by MetavCUT best used for? The Body Drill (Twist Drill) from MetavCUT is primarily used for cutting holes in metal, especially in chassis and sheet‑metal applications; its double‑ended design and HSS‑G material make it suitable for alloyed and unalloyed steels, cast irons and hard plastics where short, precise holes are required. Which three drill types exist? Commonly distinguished drill types are Metal Drills (often HSS or HSS‑G), Wood Drills, and Masonry/Concrete Drills; the Body Drill from MetavCUT belongs to the Metal Drill category and is optimised for metalworking tasks. What is a Twist Drill used for? A Twist Drill is mainly applied when machining high‑strength materials and larger hole diameters; its geometry allows straightforward re‑grinding and it withstands considerable loads, making the MetavCUT Body Drill suitable for demanding metal drilling operations. Why are Twist Drills pointed (sharpened)? The point sharpening reduces the cross‑edge at the tip of the Twist Drill, lowering friction and thus reducing required feed forces; this sharpening also improves centring in the workpiece and results in cleaner, more accurate holes when using tools such as the MetavCUT Body Drill.
4.3mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Die Kombination aus Extra kurzer Bauform und HSS-G-Schliff sorgt für bis zu 40 % schnellere Bohrungen bei deutlich geringerem Anpressdruck und reduziert so Bruchrisiko und Nacharbeit. Nutzen Sie die erhöhte Stabilität und die universelle Zylinderschaft-Aufnahme für präzise Bohrungen in dünnen Blechen und Profilen; Bestellungen und technische Beratung über Metav erfolgen direkt aus Emmerich. Spiralbohrer 4,3 mm (Typ N) – extra kurz von MetavCUT Der Spiralbohrer 4,3 mm von MetavCUT ist ein extra kurzer HSS-G Metallbohrer für Handbohrmaschinen, der besonders bei engen Platzverhältnissen und dünnwandigen Werkstücken Stabilität und schnelle Bohrfortschritte bietet. Extra kurz für mehr Stabilität beim Bohren HSS-G geschliffen für schnelleres Eindringen 135° Spitze reduziert Anbohrwiderstand Zylinderschaft für universelles Spannfutter Geeignet für legierte und unlegierte Stähle Mehr Leistung bei beengten Platzverhältnissen Die Extra kurze Ausführung reduziert die Hebelwirkung und verringert die Bruchneigung bei Handgeführten Bohrmaschinen. Durch den geschliffenen HSS-G-Werkstoff werden Bohrzeiten spürbar verkürzt, während der Kraftaufwand sinkt. Die 135° Spitze erleichtert das Anbohren in härteren Werkstoffen und minimiert das Wandern des Bohrers. Dieser Vorteil macht sich insbesondere bei dünnen Blechen und Profilen bemerkbar, wo Präzision und geringe Verformung zählen. Robuste Konstruktion und universelle Aufnahme Die Kombination aus gehärtetem HSS-G, genormter DIN 1897-Ausführung und Zylinderschaft gewährleistet eine einfache Handhabung in Standard-Dreibackenfuttern. Die kurze Spirallänge erhöht die Verdrehungsfestigkeit und eignet sich daher für Arbeiten mit begrenztem Platzangebot. Anwender profitieren von einer langlebigen Schneidegeometrie, die für Legierungsstähle, Gusseisen und Nichteisenmetalle ausgelegt ist, ohne dass bei normaler Werkstattanwendung sofort Verschleißprobleme auftreten. Praxistauglichkeit, Einsatzbereiche und Hinweise Mit einem Durchmesser von 4,3 mm fällt dieser Bohrer in den Standard-Bereich für Alltags- und Werkstattarbeiten und ist für dünne bis mittlere Bleche, Profile und Flachstahl empfohlen. Bei hohem Präzisionsanspruch empfiehlt sich vorheriges Zentrieren, da Bohrer in diesem Bereich zum Wandern neigen können. Tiefe Sacklochbohrungen über das Fünffache des Durchmessers sollten vermieden werden, da die Spanabfuhr kritisch wird. Für stärkere Drehmomente ist auf sichere Spannfutterspannung zu achten, weil der Zylinderschaft bei sehr hoher Last durchrutschen kann. Greifen Sie zur MetavCUT HSS-G Lösung für präzise Metallbohrungen und fordern Sie bei Bedarf technische Beratung per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produkteigenschaften Bezeichnung: Spiralbohrer Marke: MetavCUT Serie: Standard Line Norm: DIN 1897 Artikelnummer: 56043-FDA Daten Durchmesser: 4,3 mm Gesamtlänge: 55 mm Spirallänge: 22 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, gehärtet) Schaftausführung: Zylinder (Rundschaft, universell spannbar) Ausführung: extra kurz (mehr Stabilität, weniger Bruchneigung) Typ: Typ N (Normalspirale für Metall) Farbe: blank (hell fertigungsglanz) Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall FAQ Welche Werkstoffe lassen sich mit dem Spiralbohrer 4,3 mm von MetavCUT bearbeiten? Der Spiralbohrer 4,3 mm von MetavCUT (Standard Line, SKU 56043-FDA) eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe; bei sehr zähen Materialien auf geeignete Kühlung achten. Ist der Zylinderschaft des Spiralbohrers 4,3 mm für Akkubohrschrauber geeignet? Ja, der Zylinderschaft passt in gängige Dreibackenfutter von Akkubohrschraubern, jedoch ist bei hohen Drehmomenten auf feste Spannfutterspannung zu achten, da Rundschäfte bei extremer Belastung eher durchrutschen können. Warum ist die Ausführung extra kurz vorteilhaft? Die extra kurze Bauform erhöht die Verdrehungsfestigkeit und reduziert die Bruchneigung, was besonders beim Bohren in dünnwandigen Werkstücken und bei beengten Platzverhältnissen vorteilhaft ist. Welcher Spitzenwinkel ist sinnvoll für harte Werkstoffe? Der Spiralbohrer 4,3 mm verfügt über einen 135° Spitzenwinkel, der das Anbohren in härteren Werkstoffen erleichtert und das Wandern auf der Oberfläche reduziert. Gibt es spezielle Einsatzgrenzen für tiefe Bohrungen? Für den Durchmesser 4,3 mm gelten die üblichen Grenzen des Standard-Bereichs; Bohrtiefe über das Fünffache des Durchmessers wird nicht empfohlen, da die Spanabfuhr und Kühlung kritisch werden und die Bohrqualität leidet.
4.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT kombiniert hohe Präzision, verbesserte Stabilität durch die verkürzte Auskraglänge und die scharfe HSS‑G Schneidgeometrie für bis zu 40 % schnellere Bohrvorgänge bei reduziertem Anpressdruck. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 4,3 mm – MetavCUT Standard Line Der Spiralbohrer von MetavCUT in kurzer Ausführung für präzise Metallbohrungen an stationären und handgeführten Maschinen. Spiralbohrer von MetavCUT, HSS-G geschliffen Kürzere Ausführung für erhöhte Stabilität Spitzenwinkel 135° für harte Werkstoffe DIN 338 konform für kurze Spiralbohrer Zylinderschaft, geeignet für Handbohrmaschine Kompakte Bauweise sorgt für höhere Präzision und Stabilität Die kurze Ausführung reduziert die Auskraglänge und minimiert damit Vibrationen sowie das Verbiegen beim Bohren. Daraus resultiert eine deutlich bessere Rundlaufgenauigkeit und sauberere Bohrlöcher, insbesondere in hartem Material wie legiertem Stahl. Durch die geschliffene HSS‑Geometrie lässt sich die Schnittgeschwindigkeit erhöhen und die benötigte Anpresskraft um rund 50 % reduzieren, was das Arbeiten ergonomischer und effizienter macht. Geschliffenes HSS und Geometrie: Vorteile und Hinweise Geschliffene HSS‑Bohrer (HSS‑G) bieten sehr scharfe Schneiden und hohe Maßtreue; dies führt zu saubereren Bohrbildern und präziseren Ergebnissen. Die Ausführung als geschliffener Zylinderschaft sorgt für exakten Halt im Spannfutter. Der Spitzenwinkel 135° unterstützt das Anbohren harter Werkstoffe und reduziert das Wandern des Bohrers beim Ansetzen. Beachten Sie, dass geschliffene Bohrer empfindlicher gegen Schlagbelastung sind und bei Bedarf mit Kühlung eingesetzt werden sollten. Norm, Typ und empfohlene Einsatzbereiche Die Ausführung entspricht DIN 338 für kurze Spiralbohrer und wird als Typ N (Normalspirale) klassifiziert, ideal für Metallbearbeitung in Werkstatt und Produktion. Durchmesser 4,3 mm fällt in den Standard‑Bereich, wodurch der Bohrer sowohl für stationäre Säulenbohrmaschinen als auch für handgeführte Akkubohrmaschinen geeignet ist. Typische Materialien sind legierte und unlegierte Stähle, Gusswerkstoffe, Sintereisen, Nichteisenmetalle und harte Kunststoffe. Zielgruppe und Anwendungsempfehlung Professionelle Metallverarbeiter, Instandhalter und engagierte Heimwerker profitieren von der Kombination aus Stabilität und schneller Schnittleistung. Für höchste Passungsgenauigkeit empfiehlt sich vorheriges Zentrieren mit einem Zentrierbohrer; bei allgemeinen Anwendungen kann direkt gebohrt werden. Der Bohrer eignet sich besonders, wenn präzise, wiederholbare Bohrungen in mittleren Serien oder Einzelteilen gefragt sind. Empfehlung: Für präzise Metallbohrungen empfehlen wir den MetavCUT Spiralbohrer; bei Detailfragen erreichen Sie unsere Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 45043-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 338 Fakten Durchmesser: 4,3 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G (geschliffen) Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N (Normalspirale) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der MetavCUT Spiralbohrer (HSS‑G) SKU 45043-FDA ist ausgelegt für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie harte Kunststoffe und liefert in diesen Werkstoffen saubere Bohrbilder. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der kurze Spiralbohrer eignet sich für Handbohrmaschine und stationäre Maschinen; bei handgeführten Anwendungen sorgt die reduzierte Auskraglänge für bessere Stabilität und weniger Vibration. Was bedeutet HSS‑G und welche Konsequenzen hat das für die Anwendung? HSS‑G steht für geschliffen; dadurch entstehen sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was besonders bei Metall vorteilhaft ist. Im Gegenzug ist der Bohrer etwas empfindlicher gegen seitliche Schläge und sollte bei Bedarf mit Kühlung betrieben werden. Warum ist ein Spitzenwinkel von 135° vorteilhaft? Ein Spitzenwinkel von 135° reduziert das Wandern beim Anbohren und verteilt die Spänedynamik günstiger bei harten Werkstoffen, wodurch das Einstechen kontrollierter und die Standzeit oft länger wird. Brauche ich einen Vorbohrer für Durchmesser 4,3 mm? Im Standard‑Bereich (2,0–13,0 mm) kann oft direkt gebohrt werden; für hochpräzise Passungen empfiehlt sich jedoch ein Zentrierbohrer, um die Querschneide zu entlasten und maximale Maßhaltigkeit zu erreichen.
4.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — short, 4.3 mm, HSS‑G, DIN 338, bright finished The Twist Drill (Type N) short is a precision metalworking drill for Drilling Machines, providing a 4.3 mm diameter, 135° tip angle and a bright finished, fully ground shank for stable, accurate machining. Short design for increased stability HSS‑G material for high wear resistance 135° tip angle for hard materials Fully ground shank for precise runout Conforms to DIN 338 standard Precision and performance for demanding metalwork Designed for metalworking applications, the Twist Drill from MetavCUT combines a short design with a fully ground geometry to reduce deflection and improve positional accuracy. This shorter projection decreases the lever arm during drilling, which leads to noticeably better stability and less tendency to wander when starting a hole. The result is consistent hole quality and reduced rework effort in workshop and production environments. Material and longevity: why HSS‑G matters Built from HSS‑G (ground high speed steel), this short twist drill achieves a sharp cutting geometry with excellent edge quality. Ground manufacturing produces a cleaner flute profile and higher concentricity, which translates into faster penetration and longer tool life when paired with appropriate cooling. For operations in alloyed and unalloyed steels, cast steels and non‑ferrous metals, the material choice balances toughness and hardness for reliable performance. Geometry optimized for hard materials and accuracy A 135° tip angle is selected to improve entry and reduce chipping when working with harder materials such as stainless steel. The Type N normal spiral flute geometry offers predictable chip evacuation and good centring characteristics on metal substrates. Because the tip and flute form are ground rather than rolled, the drill produces clean, round holes with reduced burr formation under the correct machining parameters and coolant use. Suitable applications and who benefits most Workshops and machine shops that require precise, repeatable metal drilling benefit from the short Twist Drill Type N configuration. The tool is especially suitable for tasks on stationary and portable Drilling Machines where rigidity is essential, such as component manufacture, maintenance and toolroom work. Its characteristics make it a practical choice for machinists focused on hole quality and production efficiency. Strong recommendation: For precise metal drilling choose the MetavCUT Twist Drill Type N short for superior stability and hole quality — METAV Werkzeuge provides thorough technical advice and support: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill, short, Type N, Diameter 4.3 mm, Overall Length 75 mm Brand: MetavCUT SKU: 48043-FDA Material: HSS‑G Tip Angle: 135° Norm: DIN 338 Colour: bright finished Execution: short Shank: fully ground For: Drilling Machine Spiral Length: 43 mm Model Series: Profi Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N short mainly used for? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength materials and larger metal bore diameters. Its short geometry and ground flute design allow easier regrinding, good centring and sustained performance under higher loads. Which three drill types exist? The main categories are Metal Drill, Wood Drill and Masonry/Concrete Drill. The MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for ferrous and non‑ferrous metals. For what is a Twist Drill used? A Twist Drill is applied chiefly in the machining of high‑strength materials and larger diameters. Its form is easy to regrind and it withstands substantial loads, making it suitable for tough metalworking tasks. Why are twist drills pointed (what is the purpose of the point)? Pointing reduces the cross‑cut at the tip of the twist drill, which significantly lowers friction and therefore requires less feed force. Pointing also improves centring of the drill on the workpiece ensuring more accurate starts and straighter holes. If unsure whether this tool meets specific requirements or additional technical data is needed, METAV Werkzeuge provides comprehensive advice. Contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support.
4.4mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 4.4 mm, 118°, black, DIN 338, MetavCUT The Twist Drill by MetavCUT is a short HSS Type N drill for metalworking, designed for use with a Drilling Machine and Hand Drill to deliver precise, stable holes in demanding workshop applications. MetavCUT Twist Drill Type N, HSS short design 4.4 mm diameter for precise holes 118° point angle for easy centring Conforms to DIN 338 for short HSS drills Designed for drilling machine use in metal Precision and Stability for demanding metalwork Short design combined with HSS construction provides increased Stability and reduced run-out compared with longer drills. The reduced overhang inherent to the short execution minimises bending and vibration, so holes remain true in steel and non-ferrous metals. Conformity with DIN 338 guarantees standardised lengths and shank geometry, which improves compatibility with chucks and reduces setup time in professional environments. Easier centring and lower feed forces A 118° point angle reduces the size of the chisel edge and lowers friction during entry, which helps to centre the bit and requires less push force from the operator. For workshop users this means cleaner starts, fewer burrs and less chance of walk‑off on curved or coated surfaces. When working with common metal grades, the combination of the point geometry and HSS material delivers predictable cutting behaviour and longer usable life before regrinding is needed. Optimised for Type N metal drilling and machine use The Type N normal spiral geometry is the classic choice for metal drilling and was selected here to balance chip evacuation and cutting efficiency. This Twist Drill is specified for Drilling Machine operation and is equally suited for handheld machines where a short shank improves control. HSS manufacturing assures elasticity that reduces the risk of breakage on diameters below 6 mm while maintaining cutting performance in alloyed and unalloyed steels, cast iron and many non‑ferrous materials. Who benefits and typical applications Maintenance technicians, toolroom operatives and metal fabricators benefit from the combination of Precision and durability offered by this short HSS Type N drill. Typical applications include through and blind holes in sheet metal, plate and machined components where stability and repeatable hole quality are essential. The black surface finish assists visual inspection and handling in busy workshop conditions. MetavCUT recommends this Twist Drill Type N for precise metal drilling — for personalised technical advice METAV Werkzeuge provides expert support: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 40044-FDA Diameter: 4.4 mm Point angle: 118° Type: Type N Material: HSS Execution: short Spiral length: 47 mm Overall length: 80 mm Colour: black Application: Drills for metal For drilling machine: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT Type N best used for? The MetavCUT Twist Drill Type N is primarily used for metalworking tasks; it is ideal for drilling alloyed and unalloyed steel, cast iron and many non‑ferrous metals when operated on a drilling machine or by skilled handheld use. Its short HSS design improves stability and accuracy in workshop operations. Which three drill types exist? Three common drill types are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for those materials. For what is a Twist Drill generally used? A Twist Drill is mainly applied when machining high‑strength materials and for larger hole diameters; its shape makes it straightforward to resharpen and it withstands significant loads during cutting. It is often chosen where durability and regrindability are required.
4.4mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Typ N) — short HSS‑E Metal Drill, 4.4 mm, 135° tip, 5% cobalt‑alloyed The Twist Drill (Typ N) is a short HSS‑E metal drill designed for precise machining with a 135° point angle and a fully ground shank for secure chucking. Short design for higher stability 135° tip for hard and alloyed steels 5% cobalt‑alloyed HSS‑E for increased red‑hardness Fully ground flutes for accurate, clean holes Conforms to DIN 338 for short twist drills Precision and Stability for Demanding Metalwork A short HSS‑E drill of this design delivers notably greater stability during drilling because the reduced overhang minimises bending and vibration. The combination of a 4.4 mm diameter with a 47 mm flute length and overall length of 80 mm results in a compact tool that keeps the cutting geometry close to the chuck, improving concentricity and repeatable hole quality when used in a compatible Drilling Machine or stationary set‑up. This construction is ideal for work that requires tight tolerances and reliable hole positioning. Optimised for Hard Materials and Clean Holes Thanks to the 135° point angle and the 5% cobalt‑alloyed HSS‑E substrate, the drill penetrates harder and alloyed steels more effectively than standard HSS tools. The fully ground flute geometry produces very sharp cutting edges and high roundness, which leads to cleaner holes with less burring. Users should note that the grinded version offers excellent precision but can be more brittle than roll‑formed variants; appropriate coolant and stable clamping are recommended to extend tool life during high‑performance drilling. Designed to Meet DIN 338 Requirements and Workshop Needs Manufactured to the DIN 338 standard for short twist drills with a cylindrical shank, this tool follows established size and tolerance criteria that support interchangeability and predictable performance. The Type N spiral geometry represents the classic metal‑drill profile, suitable for materials such as alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The short format is particularly suited to precision workshop tasks where reduced run‑out and minimal deflection are priorities. Who benefits from this short HSS‑E drill? Engineers, toolroom technicians and metalworkers who require accurate, repeatable holes in tougher materials will find this drill especially useful. Its compact design and fully ground shank make it a strong choice for setups where rigidity matters—such as jig bores, component finishing and jobs on vertical or radial drilling machines. For less rigid hand‑held applications, ensure a secure chuck grip and moderate feeds to avoid undue stress on the cutting edge. Empfehlung von MetavCUT: For precise metal drilling tasks choose the MetavCUT short Twist Drill in HSS‑E; for further advice on suitability or complementary tooling contact METAV Werkzeuge — we provide expert consultation and technical support via eMail, phone and WhatsApp Email: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer), short, Type N, 4.4 mm, 135° Marke/Hersteller: MetavCUT SKU: 47044-FDA Material: HSS-E (5% cobalt-alloyed) Durchmesser: 4.4 mm Spiralänge (Flute Length): 47 mm Gesamtlänge (Overall Length): 80 mm Spitzenwinkel (Point Angle): 135° Schaft-Ausführung: fully ground (geschliffen) Ausführung: short (kurz) Anwendung: Drills for metal / Bohrer für Metall Norm: DIN 338 Für Bohrmaschine: Drilling Machine (Handbohrmaschine) Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength materials and larger drill diameters; its form allows straightforward re‑grinding and it endures higher mechanical loads, making it suitable for demanding metalworking tasks. Which three drill types are there? There are three common drill categories: metal drills, wood drills and stone/concrete drills. Why is a twist drill pointed (ausgespitzt)? The pointing reduces the cross‑cut at the drill tip, which significantly lowers friction and thus the required feed forces; at the same time the sharper point improves centring of the drill in the workpiece.
4.4mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill Twist Drill — 4.4 mm, 135°, Double-Sided, Bright Finished, HSS-G by MetavCUT A Body Drill twist drill designed for precision metalworking, ideal for drilling in automotive panels and thin sheet applications. Double-ended reversible design for extended use HSS-G material for precise, clean metal holes 135° tip optimized for harder materials Fully ground shank for excellent concentricity Short, robust profile for sheet-metal and bodywork Durable HSS-G construction for precise metalwork The Body Drill from MetavCUT is manufactured in HSS-G, a ground high-speed steel grade that delivers high precision and sharp cutting edges. Ground flute geometry provides superior hole quality and repeatable performance when machining alloys and steels. Because the flutes are ground rather than rolled, the result is a cleaner cutting geometry and improved concentricity, which reduces vibration and leads to consistently accurate holes. Double-sided design that extends tool life Engineered as a double-sided (double-ended) twist drill, this bit offers practical redundancy: when one tip becomes dull, the tool can be reversed and the second cutting end used, effectively doubling usable life for many workshop scenarios. The compact, short profile makes it particularly suited to tight spaces in automotive bodywork and thin-sheet operations, where a stable, robust tool is required for repeatable drilling. 135° tip and application guidance for harder materials The 135° tip angle reduces initial cutting forces and improves centring when working with harder materials such as stainless steel or tempered alloys. For users less familiar with drill geometry: a larger tip angle flattens the cutting edge, slowing initial penetration but improving stability and reducing burr formation. This makes the bit well suited for drilling in both alloyed and unalloyed steels, cast irons, and some hard plastics when used with appropriate cutting fluid and moderate speeds. Compatibility, handling and recommended use The bit features a fully ground shank designed for secure chucking in standard Drilling Machines and Hand Drills. Its short overall length and ground shank minimise runout, improving precision in repetitive tasks. For best results, use cooling lubricant when drilling tough steels and avoid excessive pecking on very hard materials to reduce the risk of breakage. This tool is aimed at bodywork professionals, metal fabricators, and maintenance technicians who require reliable performance in demanding conditions. MetavCUT’s HSS-G double-sided Body Drill is recommended for demanding metalworking tasks — for personalised technical advice or to confirm suitability for specific applications, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Designation: Body Drill Brand: MetavCUT SKU: 58044-FDA Diameter: 4.4 mm Point angle: 135° Version / Execution: Double-sided Colour / Finish: Bright finished Material: HSS-G Shank execution: Fully ground Spiral length (flute length): 13 mm Overall length: 55 mm For Drilling Machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Body Drill twist drill is primarily used for machining high-strength materials and larger hole diameters in metalworking. Twist drills of this type are often applied to alloyed and unalloyed steels, cast steel, cast iron, sintered iron, non-ferrous metals and hard plastics. Their geometry makes them relatively easy to grind and able to withstand significant loads. Which three drill types exist? Three common categories are metal drills, wood drills, and stone/concrete drills. The MetavCUT Body Drill belongs to the metal-drill category, designed specifically for metalworking tasks and differing in geometry and material from wood or masonry bits.
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com