High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
4.4mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — 4.4 mm, 135°, Type N, extra short, Bright finished, HSS‑G, DIN 1897 The Twist Drill Type N is an extra‑short, high‑performance HSS‑G drill bit designed for precise metal drilling with hand Drilling Machines and in confined working spaces. Extra-short design for enhanced stability 4.4 mm diameter for precise holemaking 135° point for hard materials like stainless steel Cylindrical shank fits standard three-jaw chucks HSS-G material for increased wear resistance Greater control where space is limited The extra‑short construction reduces overhang and gives noticeably more stability during manual drilling, which lowers the risk of walking or breakage when working in narrow or thin components. This shortened geometry is especially advantageous when drilling into sheet metal, profiles or thin‑walled parts, since the reduced overall length makes the bit easier to guide and prevents unwanted bending under load. Faster drilling with less force A ground HSS‑G cutting geometry enables significantly improved cutting performance: users can expect up to 40% faster drilling while requiring roughly 50% less feed force compared with conventional HSS bits. This means reduced operator fatigue and more efficient machining cycles when producing holes in alloyed and unalloyed steel, cast materials, sintered iron and hard plastics. Engineered for demanding metalwork The 135° point angle is optimised for harder materials and short‑run accuracy: it reduces initial axial deflection and shortens the time to penetrate hard surfaces such as stainless steel. As a Type N normal‑spiral twist drill, the bit is primarily intended for metalworking applications and offers a well‑balanced flute geometry for reliable chip evacuation under typical workshop conditions. Practical fit and recommended use With a cylindrical shank, the bit fits universally in standard three‑jaw chucks, making it suitable for hand and angle Drilling Machines where convenience and universality matter. Professionals and advanced DIY users who require robust, short‑length drilling tools for maintenance, assembly or fabrication will find the bit particularly useful. If uncertain whether this tool meets specific requirements, METAV Werkzeuge offers competent technical advice and support via email, phone or WhatsApp. We recommend the MetavCUT Twist Drill for precision metalworking tasks — for tailored guidance or further technical details contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Designation: Twist Drill Brand: MetavCUT SKU: 56044-FDA Diameter: 4.4 mm Point angle: 135° Type: Type N Execution: extra short Finish: bright finished Shank: cylindrical Material: HSS-G Standard: DIN 1897 Spiral length: 22 mm Total length: 55 mm For Drilling Machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which workplaces suit the MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is best applied in workshops and on assembly tasks where precise, stable holes are required. The extra‑short design makes this Twist Drill well suited to thin materials and confined spaces while the HSS‑G grade supports drilling in alloyed and unalloyed steels as well as cast materials. Which three drill types are common and how does the Twist Drill compare? Common drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill (a metal drill) is optimised for metal applications and differs from wood or masonry drills in flute geometry, point angle and material, which together ensure cleaner holes and better durability when working with metals.
4.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill – Short HSS‑G, 4.4 mm, 135° (Typ N), Bright Finished, DIN 338, Fully Ground Shank — MetavCUT The Twist Drill is a short precision drill for metalworking, designed for use with drilling machines and hand drills to deliver stable, accurate holes in hard materials. Short design for increased stability and precision HSS‑G material with CNC ground flute geometry 135° tip for improved entry in hard steels Fully ground shank for high concentricity Conforms to DIN 338 for short cylindrical twist drills Precision and reduced deflection for demanding metalwork The short construction of this Twist Drill delivers higher stability and significantly reduced deflection compared with longer geometries. That shorter overhang improves hole accuracy under load and lowers the risk of breakage during tough cuts, making it particularly suitable for precise operations in workshops and industrial environments. The combination of reduced vibration and a compact length supports consistent hole quality on difficult materials. Faster cutting and easier feed thanks to ground HSS geometry Equipped with HSS‑G material and ground flute geometry, this tool offers cleaner cutting edges and excellent chip evacuation. Ground drills (HSS‑G) typically produce sharper cutting lips and better runout, which translates to faster penetration and reduced feed forces compared with rolled variants. For users unfamiliar with the term: ground means the flutes and cutting geometry are machined by grinding, resulting in very sharp, precise edges ideal for metal. Targeted application: engineered for metals and workshop use Designed as a Type N normal spiral, the Twist Drill is aimed at operations in alloyed and unalloyed steels, cast iron, sintered materials, non‑ferrous metals and hard plastics. Use with stationary drilling machines or robust hand drills is recommended; the short length suits jigs, fixtures and confined setups. Professionals and serious hobbyists who require repeatable, high‑quality holes in demanding substrates will benefit most from this tool. DIN 338 conformity and dimensional data for reliable integration Manufactured to DIN 338 standards for short cylindrical twist drills, the tool ensures compatibility with industry expectations for dimensions and performance. Key dimensions: Diameter 4.4 mm, Spiral Length 43 mm, Overall Length 75 mm and Tip Angle 135°. The fully ground shank promotes excellent concentricity in chucks, helping to maintain accuracy across repeated operations and simplifying tool changes on CNC or conventional machines. We strongly recommend the MetavCUT short HSS‑G Twist Drill (Type N) for precision metalworking — for individual technical advice or to check suitability for specific applications contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 45044-FDA Diameter: 4.4 mm Spiral length: 43 mm Overall length: 75 mm Tip angle: 135° Type: Typ N Execution: short Material: HSS‑G Shank: fully ground Surface/Finish: bright finished Application: Drills for metal Standard: DIN 338 For drilling machine: Drilling Machine / Hand Drill Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the recommended use for the MetavCUT Twist Drill (Type N)? The MetavCUT Twist Drill (Type N) is primarily intended for metalworking applications; it excels when drilling alloyed and unalloyed steels, cast and sintered irons, non‑ferrous metals and hard plastics in both workshop and industrial settings. Can the MetavCUT Twist Drill be used in hand drills and drilling machines? Yes, the MetavCUT Twist Drill (Type N) is suitable for use in sturdy hand drills as well as stationary drilling machines; its short design and fully ground shank ensure good stability and concentricity in common chucks. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength materials and larger hole diameters; its ground geometry makes it easy to sharpen and capable of withstanding higher loads. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills pointed? The pointing reduces the cross‑cut at the tip, which lowers friction and decreases the required feed force while improving centring of the tip in the Workpiece. Can you drill wood with a Twist Drill? A metal Twist Drill can be used in wood, but guidance and finish are inferior compared to dedicated wood drills; however, metal drills are easier to resharpen and exhibit less self‑feed. At what drilling depths is the Twist Drill most used? For through‑hole drilling in solid material, Twist Drills are the standard choice; they are most commonly used up to diameters around 20 mm and drill depths up to approximately 100 mm. Is HSS or HSSE better? The general belief that HSSE steels are always superior to HSS is not universally correct; decisions should be based on specific working conditions to determine whether the higher cost of HSSE is justified.
4.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — Short, Type N, 4.4 mm, HSS‑G, DIN 338, 135° tip, Bright Finished The Twist Drill is a short HSS‑G metalworking drill designed for precise drilling on Drilling Machines and professional workshop use. Short design for increased stability Diameter 4.4 mm for precise positioning 135° tip for hard materials such as stainless steel Fully ground shank for high concentricity Complies with DIN 338 for short twist drills Precision and performance for demanding metalwork The MetavCUT Twist Drill (Short, Type N) combines HSS‑G material and a 135° tip geometry to enable efficient penetration in hard materials. The shortened overall length and flute length reduce overhang and vibration, which results in a more stable cut and better hole quality. According to manufacturer data, the ground HSS design can achieve up to 40% faster drilling with roughly 50% less feed force compared with conventional HSS bits, providing a clear productivity advantage in serial and precision tasks. Durable design with ground geometry for clean holes A ground flute geometry (CNC‑grind) gives this short twist drill very sharp cutting edges and excellent runout accuracy, which produces clean, burr‑reduced holes in metal. HSS‑G construction is ideal for machining alloyed and unalloyed steel, cast materials and non‑ferrous metals. Because ground drills can be more brittle than rolled designs, using appropriate cooling and steady fixturing is recommended to maximise tool life and prevent breakage during heavy‑duty operations. Best suited applications and user groups This Twist Drill is developed for professional workshops, toolrooms and industrial maintenance where precise metal drilling is required. Typical applications include drilling in Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Castings, Non‑Ferrous Metals and Hard Plastics. The short Type N geometry makes the bit particularly suitable for machining on Drilling Machines where stability and repeatable accuracy are priorities, rather than for freehand soft‑material work. Why tip angle and short length matter for results A 135° point angle decreases initial punching time and helps centre the drill on hard materials, reducing walk‑off and improving hole position. The short execution lowers bending moments and allows higher spindle speeds with less deflection, delivering better concentricity and longer service intervals for reaming or finishing operations. In practice, “geschliffen” (ground) means the flute geometry is cut by grinding rather than roll forming, which yields superior edge sharpness and precision at the expense of slightly increased brittleness. Strong recommendation: For accurate and efficient metal drilling choose the MetavCUT Twist Drill short Type N with HSS‑G construction — and if unsure whether this tool meets your specific requirements, METAV Werkzeuge provides expert advice and technical support via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 48044-FDA Diameter: 4.4 mm Point angle: 135° Type: Type N Execution: Short Material: HSS‑G Flute length (Spirallänge): 43 mm Overall length (Gesamtlänge): 75 mm Shank execution: Fully ground Finish/Colour: Bright finished Intended for: Drilling Machine Norm: DIN 338 Model series: Profi Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill (Short, Type N) are primarily used for machining high‑strength materials and larger drill diameters. The short, ground geometry is easy to sharpen and withstands higher loads, making it suitable for demanding metalworking tasks and robust industrial applications. Which three drill types exist? There are three common drill categories: metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for use in metalworking environments.
4.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — 4.5 mm, 118° Tip Angle, Short, Black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS metal drilling tool designed for precise, stable holes in metal components using standard Drilling Machines. MetavCUT Twist Drill Type N short for metal drilling Diameter 4.5 mm for accurate hole guidance 118° Tip Angle for reliable centring on soft metals HSS construction for toughness and wear resistance Complies with DIN 338 short-length specification Consistent Precision and Reduced Vibration for Metalworking The short design of this Twist Drill provides improved stability and reduced deflection compared with longer drills, so holes remain true to size and position. Because the exposed length beyond the Chuck is reduced, bending moments decrease and the tool transfers cutting forces more effectively to the machine. This results in fewer rework cycles and a steady hole finish when machining components from alloyed or unalloyed steel. For workshop applications where repeatable accuracy matters, the short execution is a practical advantage. Robust Material Choice for Long Tool Life Manufactured from HSS (High Speed Steel), this Type N Twist Drill balances hardness and toughness for sustained use in metal. HSS resists softening at elevated temperatures, which helps maintain cutting geometry during continuous operation. For users less familiar with the term: HSS stands for High Speed Steel, a standard tool material that performs well on steel, cast iron, non-ferrous metals and many plastics. The result is longer service life and fewer tool changes on production or maintenance tasks. Designed for Metal Drilling, Suited to Hand and Machine Work As a Type N normal-spiral geometry, the drill is optimised for metalworking tasks on Drilling Machines and compatible hand-operated equipment where controlled feed is applied. The 4.5 mm Diameter and 118° Tip Angle are chosen to give reliable centring and chip formation in a broad range of metals; the geometry supports common workshop procedures such as pilot hole drilling and sequential operation with larger diameters. This tool is particularly effective when stability and precision are required rather than deep-reach drilling. Practical Handling, Sharpening and Application Notes Short Twist Drills are easier to keep concentric in the Chuck and are less prone to chatter; this makes them well suited for repeatable workshop tasks and for operators seeking consistent results. If reconditioning is needed, the normal spiral and HSS material allow straightforward resharpening on conventional tool grinders, prolonging service life. For safe, efficient use, maintain steady feed, adequate cutting speed and appropriate lubrication when machining steel to reduce heat and extend tool life. METAV Werkzeuge offers expert advice if application specifics require tailored recommendations. We recommend MetavCUT's short Type N Twist Drill for demanding metal applications — for competent, personalised support contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40045-FDA Type: Type N Diameter: 4.5 mm Tip Angle: 118° Material: HSS Execution: short Spiral Length: 47 mm Overall Length: 80 mm Colour: black Application: Drills for metal Standard: DIN 338 Suitable For: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? A MetavCUT Twist Drill (Type N) is principally applied to the machining of high-strength materials and larger hole diameters; its form allows economical sharpening and it endures higher loads, making it suitable for demanding metalwork. Which three drill types exist? Common categories are Metal Drill (like this MetavCUT Twist Drill), Wood Drill, and Stone/Concrete Drill, each designed with geometry and materials suited to their target substrates. Why are Twist Drills pointed? Pointing reduces the cross-cut at the tip of the Twist Drill which lowers friction and thereby reduces required feed forces; in addition the sharpened tip improves centring in the workpiece. Can you drill wood with a Twist Drill? A Metal Drill such as the MetavCUT Type N can be used in wood, but guidance and finish are inferior to purpose-designed wood bits; however, metal drills are easier to resharpen and show less self-feeding. For which drilling depths is the Twist Drill most used? A through-hole in solid stock is typically produced with a Twist Drill; for diameters up to around 20 mm and depths up to about 100 mm, the Twist Drill is the most commonly applied tool. What is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is incorrect; assess working conditions and whether the higher cost of HSSE is justified for your specific MetavCUT drilling tasks before choosing.
4.5mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill Type N — 4.5 mm, 135° point angle, short execution, 5% cobalt-alloyed, HSS‑E, DIN 338 The Twist Drill Type N is a short HSS‑E metalworking bit designed for stable, precise drilling in hard materials with a 135° Point Angle and a fully ground shank for high concentricity. Short Twist Drill 4.5 mm for precise metalwork 135° Point Angle for hard materials like stainless steel 5% cobalt-alloyed HSS‑E for higher heat resistance Fully ground shank for excellent concentricity and finish Conforms to DIN 338 for short Twist Drills Designed for precision in metalworking and stable drilling Short design delivers a tangible benefit: reduced overhang means less deflection and improved accuracy when working with tough materials. The compact geometry of this short Twist Drill supports higher rigidity, so holes remain rounder and positional tolerances are easier to achieve. This is particularly relevant when machining alloyed or unalloyed Steel, Cast Iron and other Metals where tool chatter or bending would otherwise impair results. The result is a reliable Tool that helps maintain Process stability in both bench and machine applications. Robust Material and geometry for demanding applications Manufactured from HSS‑E with 5% cobalt-alloyed composition, the bit resists softening under elevated temperatures and keeps cutting edges sharper for longer life. The 135° Point Angle reduces entry forces on hard materials and improves centring on tougher Surfaces such as Stainless Steel. Being a Type N normal spiral, the geometry balances chip evacuation and edge strength—explainable: HSS‑E adds hot hardness, cobalt increases wear resistance; together they extend tool life under intermittent or high-load drilling. Machine compatibility and standards for reproducible results Designed according to DIN 338 for short Twist Drills, this Tool fits standard chuck systems and is intended for use in a drilling machine or hand drilling Machine where increased stiffness is required. The fully ground Shank ensures superior concentricity and runout characteristics, which supports precision fixtures and measured machining. For operators, this means fewer rejections and easier post-process handling when producing repeatable holes in metal components. Practical guidance, target users and safe operation Workshop professionals, maintenance technicians and toolroom users benefit most from this short Twist Drill due to its stability and suitability for harder metals. Use moderate cutting speeds, appropriate coolant for metalworking, and firm clamping to exploit the Drill’s advantages; avoid excessive overhang despite the short form. The fully ground flute geometry is explained by its manufacturing: grinding produces very sharp cutting edges and high Roundness, but requires careful handling to avoid brittle fractures—especially at very small diameters or under unsupported conditions. Strong recommendation: choose the MetavCUT Twist Drill Type N for precise metal drilling — for personalised technical advice contact METAV Werkzeuge; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271 Technical Data Designation: Twist Drill Marke: MetavCUT SKU: 47045-FDA Diameter: 4.5 mm Total Length: 80 mm Spiral Length: 47 mm Point Angle: 135° Typ: Type N Execution: short Material: HSS‑E Colour / Alloy: 5% cobalt-alloyed Shaft Finish: fully ground For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill Type N from MetavCUT? The MetavCUT Twist Drill Type N is primarily intended for drilling Metal; it excels in machining high-strength and alloyed steels thanks to its short design, which increases stability and reduces bending during operation. Can the MetavCUT Twist Drill Type N be used with a hand drilling machine? Yes, the MetavCUT Twist Drill Type N can be used in a hand drilling Machine, but optimal results are achieved with a well-secured workpiece and steady feed to minimise stress on the short, fully ground flute geometry. For what is a Twist Drill used? A Twist Drill is mainly applied when working on high‑strength materials and large diameters; its form is easy to regrind and withstands higher loads while remaining suitable for precision metal drilling. Which three drill types exist? The three main drill types are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N belongs to the Metal drill category. Why are Twist Drills pointed? Pointing the Twist Drill reduces the secondary cutting edge at the tip, which lowers friction and the required feed forces while improving centring of the Drill in the Workpiece. Can a Twist Drill be used to drill wood? A Metal drill such as the MetavCUT Twist Drill Type N can be used in Wood, but guidance and hole finish are inferior compared with dedicated Wood drills; however, Metal drills are easier to regrind and have less self‑feeding tendency. At which drilling depths is the Twist Drill most used? A drilling operation into solid material is typically performed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool.
4.5mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Der Karosseriebohrer kombiniert die HSS-G-Schneide mit doppelseitiger Bauart für kurze Rüstzeiten und präzise Bohrlöcher; ideal für Karosserie- und Blecharbeiten. Nutzen Sie die hohe Schnittleistung und den 135° Spitzenwinkel für zügiges Anbohren und wenden Sie sich bei technischen Fragen direkt an MetavCUT. Karosseriebohrer HSS-G Profi Line Der Karosseriebohrer ist ein doppelseitiger HSS-G Bohrer für präzises Bohren in Metall und Blech. Doppelseitiger Doppelendbohrer für schnellen Wechsel Geschliffene HSS-G Geometrie für hohe Präzision 4,5 mm Durchmesser für Niet- und Blechlöcher 135° Spitzenwinkel für harte Werkstoffe Kompakt: Gesamtlänge 58 mm, Spirallänge 13 mm Effiziente Bohrleistung für Metallarbeiten Die geschliffene HSS-G-Geometrie ermöglicht ein spürbar schnelleres Eindringen in Werkstoffe und reduziert die Anpresskraft deutlich. Für Anwender bedeutet das geringere Ermüdung bei Serienarbeiten und kürzere Bearbeitungszeiten bei Karosserie- und Blechbearbeitung. Der 135° Spitzenwinkel ist auf härtere Werkstoffe abgestimmt und verkürzt die Anbohrzeit ohne zu verrunden. Langlebigkeit durch Materialwahl und Verarbeitung Dank des verwendeten HSS-G und der präzisen Schleifgeometrie entstehen sehr scharfe Schneiden und saubere Bohrlöcher, was Verschleiß reduziert. Die kompakte Bauform und die geschliffene Schaftausführung sorgen für guten Rundlauf in stationären sowie handgeführten Aufnahmen. Zur Lebensdauersteigerung empfiehlt sich der Einsatz von Kühlschmierstoff bei dichten oder legierten Stählen. Anwendungshinweise für sicheres und präzises Bohren Vor dem Bohren empfiehlt sich Anpunkten mit einem Zentrierbohrer, besonders bei dünnen Blechen, um Wandern zu vermeiden. Bei Handbohrmaschine moderate Drehzahlen und gleichmäßiger Vorschub sichern präzise Ergebnisse. Wegen der fein geschliffenen Kanten ist der Bohrer besonders geeignet für Niet- und Dünnblecharbeiten; bei Serienbearbeitung sorgt die doppelseitige Ausführung für geringere Stillstandszeiten. Konzipiert für Werkstatt und Karosseriearbeit Dieses Werkzeug richtet sich an Karosserie-Profis, Werkstätten und ambitionierte Handwerker, die auf Effizienz und Präzision Wert legen. Die Kombination aus kompakter Länge, geschliffener Geometrie und doppelter Nutzbarkeit macht den Bohrer zur praktischen Lösung beim schnellen Austausch und bei Reparaturarbeiten an Fahrzeugblechen oder ähnlichen Anwendungen. Setzen Sie auf die Präzision der Profi Line von MetavCUT und fordern Sie ein Angebot oder technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 an, alternativ WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 59045-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Profi Line Material: HSS-G Ausführung: doppelseitig Daten Durchmesser: 4,5 mm Gesamtlänge: 58 mm Spirallänge: 13 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Schaftausführung: geschliffen Farbe: schwarz ohne Fase Für Bohrmaschine: Handbohrmaschine Einsatzbereich: Bohrer für Metall HSS-G: geschliffener Schnellarbeitsstahl, hohe Präzision FAQ Wie empfiehlt sich der Einsatz des Karosseriebohrers bei dünnem Blech? Für dünnes Blech empfiehlt sich Anpunkten mit einem Zentrierbohrer und moderater Drehzahl; der Karosseriebohrer aus der Profi Line von MetavCUT liefert dann saubere Löcher ohne Ausreißer. Ist der Bohrer für Edelstahl geeignet? Der Karosseriebohrer (MetavCUT, SKU 59045-FDA) mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe; bei Edelstahl sollten angepasste Drehzahlen und Kühlschmierstoff verwendet werden. Wie nutze ich die doppelseitige Ausführung effizient? Die doppelseitige Bauart erlaubt das Umdrehen bei stumpfer Spitze, was Rüstzeiten reduziert und besonders bei Reparatur- und Karosseriearbeiten Zeit spart. Welche Maschine passt am besten zu diesem Bohrer? Der Bohrer ist ausgelegt für die Handbohrmaschine und stationäre Maschinen mit entsprechender Aufnahme; durch die geschliffene Schaftausführung wird ein guter Rundlauf unterstützt.
4.5mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
MetavCUT Body Drill (Karosseriebohrer) — Twist Drill for Drilling Machine, 4.5 mm Ø, 135° tip, HSS‑G, double‑sided, bright finished, fully ground shaft The MetavCUT Body Drill is a double‑sided Twist Drill engineered for precise metalworking on drilling machines, combining HSS‑G cutting performance with a 135° tip for hard materials. Double‑ended design for two usable tips High‑speed HSS‑G for precise metal drilling 135° tip for harder materials like stainless steel Fully ground shank for high roundness accuracy Bright finished surface for improved corrosion resistance Engineered for hard metals with lower feed force and fast cutting The MetavCUT Body Drill uses HSS‑G material to achieve high cutting performance in demanding conditions. The ground geometry results in very sharp cutting edges and improved roundness, which can lead to up to 40% faster drilling and approximately 50% less required feed force compared with conventional HSS drills. This makes the tool particularly efficient when working with alloyed and unalloyed steels, cast steels and other hard metals, delivering clean holes with minimal burr formation. Practical double‑ended design and robust shaft for workshop use A double‑sided or double‑ended Twist Drill offers clear workshop advantages: two usable tips in one short, stable body. If one tip becomes blunt, the drill can be reversed and the opposite tip used, effectively providing two tools in a single bit. The fully ground shaft and bright finished surface contribute to high concentricity and easier handling in chucks, while the compact overall length increases stability when drilling thin sheets or rivet holes. Best applications and dimensional clarity for correct tool selection Designed for metalworking, this Body Drill is suitable for Drilling Machines and hand drills where precision is required. Key dimensions are a diameter of 4.5 mm, a spiral/ flute length of 13 mm and an overall length of 58 mm. Typical materials include cast iron, sintered iron, tempered cast, non‑ferrous metals and hard plastics; the 135° tip reduces thrust and improves centring in tougher substrates. Choose appropriate speeds and coolant when machining harder alloys. Simple recommendations to prolong life and improve hole quality To avoid chipping or breakage, use moderate speeds and adequate cooling when working with hard materials, and secure the workpiece to eliminate runout. The ground flute geometry improves chip evacuation, but the short spiral length is optimised for through‑holes and thin‑section drilling rather than deep boring. For repeatable, high‑quality results, prefer stationary setups with coolant and verify feed rates to match the stated benefits of reduced feed force. Strong recommendation: the MetavCUT Body Drill is ideal for professionals seeking durable, precise metal drilling — for further technical advice or assistance contact METAV Werkzeuge for expert consultation via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58045‑FDA Diameter: 4.5 mm Tip angle: 135° Material: HSS‑G Execution: double‑sided Colour / Finish: bright finished Intended for: Drilling Machine / Hand Drill Spiral length: 13 mm Overall length: 58 mm Shaft execution: fully ground Model series: Standard Line Application: Drills for metal Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Body Drill be used in a handheld drill or is a drilling machine required? The MetavCUT Body Drill is suitable for use in both a drilling machine and a robust hand drill, but best results—especially in hard or alloyed metals—are achieved with a stable drilling machine and appropriate coolant to reduce heat and prevent breakage. Why choose a double‑sided Twist Drill like the MetavCUT Body Drill? A double‑sided Twist Drill provides two usable tips in one tool; when one end becomes blunt it can simply be reversed, offering greater cost efficiency and reduced downtime in workshops handling thin sheets or riveted assemblies. For what is a Twist Drill used? A Twist Drill is mainly applied to machining high‑strength materials and larger drill diameters; its design allows relatively easy re‑grinding and it withstands higher loads, making it especially common for metalworking tasks and holes in sheet or structural components. Which three drill types exist? There are three common drill families: metal drills, wood drills and masonry/concrete drills. Each type is optimised for material‑specific geometry and cutting behaviour.
4.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der geschliffene HSS‑G Spiralbohrer verbindet hohe Schnittgeschwindigkeit mit extra langer Bauart: Bis zu 40 % schnelleres Bohren und 50 % geringerer Anpressdruck reduzieren Arbeitszeit und Ermüdung. Die 125 mm Spirallänge ermöglicht tiefe, saubere Bohrungen in Metall. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer HSS‑G extra lang von MetavCUT Der Spiralbohrer HSS‑G extra lang für tiefe Metallbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen. Extra lange Bauart für tiefe Bohrungen Geschliffen HSS‑G für scharfe Kanten und Präzision 125 mm Spirallänge, verbessert Spänetransport Spitzenwinkel 135° für harte Werkstoffe DIN 1869 konform, geeignet für Stahl und Guss Schnelleres Bohren, weniger Kraftaufwand Der geschliffene HSS‑G Werkstoff reduziert Reibung und ermöglicht ein bis zu 40 % schnelleres Arbeitsfortschreiten bei gleichzeitig 50 % geringerem Anpressdruck im Vergleich zu konventionellen HSS‑Bohrern. Das Resultat ist weniger Werkzeugverschleiß und eine höhere Produktivität in Serien‑ und Einzelarbeiten. Für Anwender bedeutet das konkret kürzere Bearbeitungszeiten und geringere körperliche Belastung bei wiederholten Bohrungen. Extra Länge sorgt für Zugänglichkeit bei tiefen Bohrungen Mit einer Gesamtlänge von 185 mm und einer aktiven Spirallänge von 125 mm eignet sich dieses Extra‑Lang‑Design speziell für tiefe Sackloch‑ und Durchgangsbohrungen, bei denen Standardlängen nicht ausreichen. Die verlängerte Arbeitslänge verbessert den Späneaustrag in tiefen Bohrungen und reduziert das Nachschneiden. Dennoch empfiehlt sich bei sehr langen Auskragungen eine ruhige Führung oder der stationäre Einsatz zur Vermeidung von Abweichung. Geometrie und Material für harte Werkstoffe Die 135° Spitzengeometrie ist optimal abgestimmt auf härtere Werkstoffe wie legierten Stahl und Edelstahl, während die Norm DIN 1869 die Eignung für anspruchsvolle Metallbearbeitung bestätigt. Der geschliffene Schaft liefert hohe Rundlaufgenauigkeit und saubere Bohrbilder, verlangt jedoch vorsichtigen Umgang: Bei tiefen oder sehr harten Materialien ist Kühlung und langsamer Vorschub empfehlenswert, um thermische Überlastung und Bruchrisiken zu minimieren. Einsatzempfehlung für Werkstatt und Montage Mit einem Durchmesser von 4,5 mm bewegt sich der Bohrer im Standard‑Bereich und ist für den Einsatz in Werkstatt, Montage und mit Handbohrmaschinen geeignet. Für hochpräzise Passungen empfiehlt sich Voranpunkten mit einem Zentrierbohrer, um Abwandern zu vermeiden. Bei tiefen Bohrungen oder häufiger Nutzung erhöht eine stationäre Aufnahme mit laufender Kühlung die Standzeit erheblich und sorgt für konstante Bohrqualität. Wählen Sie den MetavCUT HSS‑G Spiralbohrer in Extra‑Länge für anspruchsvolle Metallbohrungen und sichern Sie sich präzise Ergebnisse — bei Fragen kontaktieren Sie uns per E‑Mail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 oder via WhatsApp +49 170 2837271. Technische Daten Artikelnummer: 32045-FDA Marke: MetavCUT Serie: Standard Line Fakten Durchmesser: 4,5 mm Gesamtlänge: 185 mm Spirallänge: 125 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Norm: DIN 1869 Ausführung: extra lang Schaftausführung: geschliffen Verpackungseinheit: 10 Farbe: Blank Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine SKU: 32045-FDA FAQ Für welche Materialien eignet sich dieser Spiralbohrer am besten? Der MetavCUT Spiralbohrer HSS‑G (SKU 32045-FDA) ist ausgelegt für legierte und unlegierte Stähle, Grauguss, Gusseisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff und erreicht sichere Ergebnisse bis circa 1000 N/mm². Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der 4,5 mm Bohrer fällt in den Standard‑Bereich und kann mit Handbohrmaschinen eingesetzt werden; bei tiefen Löchern oder erhöhter Präzision empfiehlt sich jedoch eine ruhige Führung oder stationäre Aufnahme. Welche Vorteile bietet die geschliffene Schaftausführung? Die geschliffene Schaftausführung sorgt beim MetavCUT Spiralbohrer für hohe Rundlaufgenauigkeit und sehr scharfe Schneiden, was zu sauberen, präzisen Bohrbildern führt; dafür ist vorsichtiger Umgang und Kühlung wichtig, um Bruchrisiken zu minimieren. Brauche ich Vorbohren für 4,5 mm Durchmesser? Für allgemeine Anwendungen kann direkt gebohrt werden; bei besonders präzisen Passungen empfiehlt sich Voranpunkten mit einem Zentrierbohrer, um ein Wandern der Bohrung zu verhindern. Wie beeinflusst die Spitzengeometrie die Anwendung? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers verkürzt die Anbohrzeit in härteren Werkstoffen und reduziert den Schneidendruck, wodurch sich saubere Einstiche und weniger Ausriss ergeben.
4.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G Twist Drill, 4.5 mm, 135°, Bright Finished, Fully Ground, DIN 1869 (MetavCUT) The Twist Drill is an extra long HSS‑G drill designed for deep metal drilling with a 135° point angle for reliable centring and efficient penetration. Extra long design for deep hole access HSS‑G fully ground for precise bore quality 135° point angle for harder materials Bright finished surface for corrosion protection Compatible with Handheld Drilling Machines Faster, cleaner metal drilling for demanding tasks The HSS‑G composition of this Twist Drill delivers a combination of hardness and toughness optimised for metalworking. Because the flutes are CNC ground rather than rolled, the tool achieves high roundness accuracy and razor‑sharp cutting edges, which produce cleaner Holes and extend tool life under appropriate cooling. One major benefit is the documented performance gain: the ground HSS design can drill up to 40% faster and requires up to 50% less feed force compared with conventional HSS variants, making it particularly efficient for alloys and unalloyed steels. Designed for deep-hole applications and accessibility With a Spiral Length of 160 mm and an Overall Length of 235 mm, this extra long Twist Drill reaches depths that standard lengths cannot. The extended geometry is ideal when drilling in confined or hard‑to‑reach positions, or when a longer reach is needed from a Drilling Machine or handheld device. The tool’s bright finished surface eases chip evacuation and reduces surface friction during long penetration depths, supporting stable, repeatable results. Optimised geometry for hard materials and precision The 135° Point Angle of this Twist Drill reduces walking and improves centring when working with harder Metals such as stainless steel or cast materials. The fully ground shank ensures superior concentricity in chucks, translating into better hole tolerances and lower run‑out. For users needing precision bores in components, this geometry offers a clear advantage: faster initial engagement and a reduced tendency for the tool to skid during the start of the cut. Practical guidance: use, cooling and sharpening Although the ground HSS design gives excellent cutting performance, users should note the material can be more brittle than rolled types and benefits from correct application. Apply steady cutting speeds, adequate coolant and moderate feed to avoid chipping. The Twist Drill is easier to regrind when required, and the sharpened geometry reduces radial forces, meaning less effort during re‑sharpening. For stationary machine work and workshop conditions, cooling and secure clamping are recommended to maximise service life. For demanding deep‑hole metalwork choose the MetavCUT Twist Drill with its extra long HSS‑G design — METAV Werkzeuge provides expert advice and support: eMail info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 33045-FDA Durchmesser: 4.5 mm Spitzenwinkel: 135° Ausführung: Extra long Farbe: Bright finished Material: HSS‑G Schaft Ausführung: Fully ground Gesamtlänge: 235 mm Spirallänge: 160 mm Norm: DIN 1869 Anwendung: Drills for metal / For Drilling Machine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Twist Drill (MetavCUT Twist Drill) be used on? The MetavCUT Twist Drill is intended primarily for metalwork; its HSS‑G composition and 135° point angle make it suitable for legierte und unlegierte Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle and hard plastics where precision and durability are required. Is the MetavCUT Twist Drill suitable for handheld drilling machines? Yes, the MetavCUT Twist Drill can be used with a Handheld Drilling Machine, but due to its extra long geometry and the ground HSS design, stable clamping, reduced feed forces and adequate cooling are advised to prevent chipping and ensure safe operation. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger bore diameters; the form is easy to regrind and endures higher loads, which is why the MetavCUT Twist Drill is chosen for demanding metalworking tasks. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for such applications. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip of the Twist Drill, which lowers friction and therefore decreases required feed forces, while improving centring and initial penetration of the MetavCUT Twist Drill. Can the MetavCUT Twist Drill be used to drill wood? A metal drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; the MetavCUT Twist Drill can cut wood but may show poorer tracking and a less clean hole while being easier to regrind and exhibiting lower self‑feed characteristics. At which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool, and the extra long MetavCUT variant is especially useful for deeper requirements. What is better, HSS or HSSE? The general belief that HSSE is always superior to HSS is not universally true. Consider whether your working conditions actually justify the higher purchase cost of HSSE before deciding; the MetavCUT HSS‑G grade may already meet many demanding applications.
4.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Drill for Metal (Ø 4.5 mm, 135° Point, Extra Long, Bright Finished, HSS-G, DIN 1869) The Twist Drill is an Extra Long Drill for Metal designed for deep drilling in Drilling Machines and workshop applications. Extra Long design for deep drilling Fully Ground shank for high runout accuracy HSS-G Material for hard metal performance 135° Point Angle optimized for tough alloys Bright Finished surface for consistent chip evacuation Deep reach and faster metal removal for demanding tasks Engineered as an Extra-Long solution, this Twist Drill delivers extended reach with a Gesamtlänge of 295 mm and a Spiral Length of 200 mm, making it ideal for deep-hole tasks. The HSS-G construction and the special flute geometry enable up to 40 % faster drilling and require 50 % less Anpresskraft compared with conventional HSS tools, which translates to higher productivity on long runs and reduced operator fatigue. Precision geometry that creates clean, accurate holes Thanks to the Fully Ground flute geometry and precise Points, the drill achieves very sharp cutting edges and excellent Rundlaufgenauigkeit. The 135° Point Angle is tailored for harder Werkstoffe and shortens Anbohrzeit, while the DIN 1869 specification ensures consistent quality. Because ground tools can be more brittle, stationary operation with coolant is recommended to preserve tool life and hole quality. Suited materials and professional workshop applications This Twist Drill is intended for a wide range of Metall applications, including legierten and unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle and Hartkunststoff, and is rated for materials up to 1000 N/mm². Workshops, toolrooms and industrial users benefit from the combination of depth capability and cutting performance when working on components that require deep, precise bores. Handling, sharpening and practical tips for longer service life For best results mount the drill concentrically in a suitable Chuck of a Drilling Machine and use sufficient coolant during operation. The Ausspitzung (point preparation) reduces Querschneide and lowers Reibkräfte, so lower Vorschubkräfte are sufficient and centering improves. If regrinding is necessary, maintain the 135° geometry to preserve performance; note that ground HSS-G drills are easier to resharpen yet require careful handling to avoid breakage. If unsure whether this tool fits specific requirements, METAV Werkzeuge offers comprehensive technical advice to help select the right solution. Strong recommendation: Choose the MetavCUT Twist Drill for deep, demanding metal drilling and consult METAV Werkzeuge for expert support — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 34045-FDA Diameter: 4.5 mm Overall Length: 295 mm Spiral Length: 200 mm Point Angle: 135° Execution: extra long Colour: bright finished Shank Execution: fully ground Material: HSS-G Norm: DIN 1869 For: Drilling Machine Model Series: Standard Line Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily applied to the machining of high-strength Werkstoffe and large bore diameters; its form allows relatively easy resharpening and it withstands considerable Belastungen, making it suitable for demanding metalworking tasks. Which three drill types exist? There are three common drill categories: Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drills group and is optimized for metalwork. Why are Twist Drills pointed? The point geometry reduces the Querschneide at the Tip of the Twist Drill; by pointing, frictional forces are significantly lowered and smaller Vorschubkräfte are needed while the Tip centers better in the Workpiece. Can you use metal drills in wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance is poorer and the bore finish may be less clean; however, Metal Drills are easier to resharpen and show less self-feed tendency. For which bore depths is the Twist Drill most commonly used? A through-hole is commonly executed with a Twist Drill; for diameters up to 20 mm and drill depths up to 100 mm, the Twist Drill is the most frequently used tool, while the extra-long MetavCUT version extends that capability for deeper bores. Is HSS or HSSE better? The general belief that HSSE steels are inherently superior to HSS is not universally correct; evaluate working conditions carefully to decide whether the higher investment in HSSE is justified for your specific MetavCUT application.
4.5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 4.5 mm, 135°, Extra Short, Bright Finished, HSS‑G, DIN 1897 (Cylindrical Shank) by MetavCUT The Twist Drill Type N is an extra short HSS‑G drill designed for Drilling Machines and Hand Drills, offering high stability and efficient metalworking in tight or thin‑walled components. Extra‑short design for improved stability Optimised 135° tip for harder materials HSS‑G construction for long tool life Cylindrical shank fits standard chucks Standard Line quality for professional use Compact design increases stability and reduces breakage The Twist Drill in an extra short execution combines a reduced Overall Length with a shortened Spiral Length to deliver superior Verdrehungsfestigkeit (torsional stability) compared with standard drills. Shorter geometry reduces the lever arm and thus the risk of bending and breakage, which is especially valuable when working in constrained assemblies or on thin sheet and profile parts. The result is more reliable hole quality and fewer tool changes during demanding metalworking tasks. 135° point angle and Type N spiral for tougher materials A 135° tip halves the tendency to wander on tough surfaces and shortens the initial penetration phase, which is advantageous when machining stainless steel and other hard alloys. The Type N normal spiral profile is optimised for Metal work and provides consistent chip evacuation and cutting behaviour across legierte und unlegierte Stähle, Gusswerkstoffe and non‑ferrous metals. For operators this means cleaner entry holes and predictable feed forces when using a Hand Drill or Drilling Machine. Practical handling: cylindrical shank and compatibility Equipped with a Cylindrical Shank, this Twist Drill clamps securely in standard three‑jaw chucks and is universally compatible with conventional drill chucks. While cylindrical shanks are broadly adaptable, users should ensure correct chuck tightening to avoid slippage under high torque; using a torque‑controlled drill or a drill sleeve can further improve safety. The bright finished surface assists in visual inspection of wear and facilitates cleaning after use. Target users and best applications Developed for machinists, fitters and maintenance technicians, the MetavCUT Standard Line Twist Drill is particularly well suited to workshop tasks that require robust Metal drilling in tight spaces and accurate hole positioning. Conforming to DIN 1897 and made from HSS‑G, this tool balances cost and performance for professional everyday use and for jobs where straightforward regrindability and dependable cutting speed are required. For precision metalworking choose MetavCUT’s Twist Drill Type N with Extra Short design — METAV Werkzeuge offers comprehensive technical advice and personalised support: eMail info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 56045-FDA Diameter: 4.5 mm Point Angle: 135° Execution: Extra short Finish / Colour: Bright finished Material: HSS‑G Type: Type N Spiral Length: 24 mm Total Length: 58 mm Shank Execution: Cylindrical For Drilling Machine: Drilling Machine (Hand Drill) Model Series: Standard Line Application: Drills for Metal Standard: DIN 1897 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the Twist Drill Type N from MetavCUT suitable for hand drills? Yes. The MetavCUT Twist Drill Type N with a Cylindrical Shank is designed for use in Hand Drills and standard chucks; its Extra Short geometry improves stability in manual operations and reduces the risk of breakage when clamping and feeding correctly. What is the Twist Drill used for? The Twist Drill Type N by MetavCUT is primarily applied to the machining of high‑strength materials and larger hole diameters; its form is straightforward to regrind and withstands higher loads, making it ideal for steels, cast materials and hard plastics. Which three drill types exist? Common categories are Metal drills (such as the MetavCUT Twist Drill Type N), Wood drills, and Stone/Concrete drills. Why are Twist Drills pointed? Twist Drills are pointed to reduce the cross‑cut at the tip; this lowering of the cross‑edge decreases friction so that significantly lower feed forces are required and the drill centers more reliably in the workpiece. Can a metal drill be used in wood? A Metal drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish may be inferior compared with dedicated Wood drills; however, metal drills are easier to regrind and tend to produce less self‑feeding. For which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most commonly used tool. Is HSS or HSSE better? There is no universal answer; the belief that HSSE steels are always superior to HSS is incorrect. Assess whether your working conditions justify the higher cost of HSSE before choosing.
4.5mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Nutzen Sie die Kombination aus HSS-G Schneidleistung und Sechskant Schaft für schnelle, präzise Metallbohrungen; der geschliffene Spiralbohrer reduziert die Anpresskraft und beschleunigt den Bohrvorgang spürbar. Bestellen Sie den Spiralbohrer von MetavCUT über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer HSS-G von MetavCUT Der Spiralbohrer HSS-G ist für präzise Metallbohrungen ausgelegt und eignet sich für Handbohrmaschine und stationäre Anwendungen Geschliffener HSS-G für hohe Schneidleistung Sechskant Schaft für formschlüssigen Werkzeugwechsel DIN 338 Kurzspiralbohrer für Metallbearbeitung Spirallänge 46 mm für effiziente Spanabfuhr Präzision und Leistung bei Metallbohrungen erreichen mehr Effizienz Der geschliffene HSS-G Spiralbohrer liefert scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt. Durch die spezifische Ausführung lässt sich die Vorschubkraft deutlich reduzieren, was in der Praxis ein bis zu 40 % schnelleres Bohren und 50 % weniger Anpresskraft ermöglicht. Diese Kombination reduziert die Maschinenlaufzeit und steigert die Produktivität in Werkstatt und Produktion, ohne zusätzliche komplexe Werkzeuge zu benötigen. Vielseitige Einsatzgebiete für Werkstatt, Montage und DIY Mit einem Durchmesser von 4,5 mm fällt dieser Spiralbohrer in den Standard-Bereich und ist ideal für allgemeine Werkstattarbeiten, Montageaufgaben und DIY-Projekte. Er eignet sich für dünne bis mittlere Bleche, Profile, Flachstahl, Aluminium und Kunststoffe. Für hochpräzise Passungen empfiehlt sich das Voranstechen mit einem Zentrierbohrer, um Wandern auf der Oberfläche zu vermeiden und exakte Passmaße zu erreichen. Praktische Handhabung und Tipps für lange Lebensdauer Der Sechskant Schaft ermöglicht schnellen Wechsel in Bit-Haltern und reduziert Körnerschlupf bei Akkuschraubern. Weil geschliffene Bohrer empfindlicher gegenüber Stoßbelastung sind, empfiehlt sich bei intensiver Nutzung die stationäre Aufnahme und der Einsatz von Kühlmittel, besonders bei legierten Stählen. Für Durchmesser im Standard-Bereich kann meist direkt gebohrt werden; bei sehr hoher Präzision hilft ein Anpunktieren, die Zentrierung zu gewährleisten. Normgerechte Qualität und materialtechnische Vorteile Die Einhaltung der DIN 338 garantiert die Zuordnung als kurzer Spiralbohrer mit Zylinderschaft und macht die Standard Line von MetavCUT planbar in Bestückung und Einsatz. HSS-G steht für geschliffenen Schnellarbeitsstahl, der durch seine Schärfe saubere Bohrbilder erzeugt und besonders für legierte sowie unlegierte Stähle geeignet ist. Die kompakte Bauweise mit einer Spirallänge von 46 mm sorgt für zuverlässige Spanabfuhr und reduziert Verstopfungen bei Metallbearbeitung. Empfehlung: Für präzise und wirtschaftliche Metallbearbeitung wählen Sie den MetavCUT HSS-G Spiralbohrer aus der Standard Line — bei Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 57045-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Daten Durchmesser: 4,5 mm Gesamtlänge: 98 mm Spirallänge: 46 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffener Schnellarbeitsstahl, hohe Schärfe) Ausführung: geschliffen Schaft: Sechskant (E6.3 kompatibel) Farbe: Silber Für Bohrmaschine: Handbohrmaschine FAQ Ist der Spiralbohrer für legierte Stähle geeignet? Der MetavCUT Spiralbohrer HSS-G ist speziell für legierte und unlegierte Stähle sowie Gusswerkstoffe ausgelegt und bietet durch den geschliffenen Schliff saubere Bohrbilder und gute Schneidleistung. Kann der Sechskant Schaft im Akkuschrauber verwendet werden? Ja, der Sechskant Schaft ist für den Einsatz in Bit-Haltern von Akkuschraubern geeignet und sorgt für formschlüssige Drehmomentübertragung ohne Durchrutschen. Welche Vorteile bietet die DIN 338 Norm bei diesem Bohrer? Die DIN 338 Klassifikation steht für kurze Spiralbohrer mit Zylinderschaft und gewährleistet kompatible Abmessungen sowie reproduzierbare Fertigungsqualität in der Standard Line von MetavCUT. Brauche ich Vorbohren mit dem 4,5 mm Bohrer? Für Standardanwendungen im Bereich 2,0–13,0 mm kann in der Regel direkt gebohrt werden; bei hochpräzisen Passungen empfiehlt sich vorheriges Zentrieren oder Anpunktieren. Welche Pflege verlängert die Lebensdauer des Bohrers? Kühlmittel bei Stahlbearbeitung, moderate Vorschubgeschwindigkeit und stationäre Aufnahme bei intensiver Nutzung vermeiden Überhitzung und Bruchrisiko des geschliffenen HSS-G Werkzeugs.
4.5mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Twist Drill (Spiralbohrer) – Left-Cutting HSS‑G, 4.5 mm, 135° (Profi Line) The Twist Drill (Spiralbohrer) by MetavCUT is a left‑cutting metal drill designed for drilling and extraction tasks in harder materials, best used with a Drilling Machine. High‑performance HSS‑G construction for durability Left‑cutting geometry for screw extraction and reverse drilling 135° tip angle for efficient work in hard metals Conforms to DIN 338 for short cylinder‑shank drills Part of the Profi Line for consistent industrial quality Maximum penetration power with reduced effort Built in HSS‑G, this Twist Drill combines hardness and toughness to withstand high stresses when drilling metal. The 4.5 mm diameter provides a versatile hole size for many engineering tasks, while the 135° tip angle reduces the tendency to wander on entry and shortens the initial bite time in tougher materials. This results in faster hole making with lower operator force, an advantage in production environments where repeatable accuracy matters. Effective extraction and specialised left‑cutting design The left‑cutting (linksschneidend) geometry is ground to cut correctly in counter‑clockwise rotation, making this Twist Drill particularly suitable for removing broken or seized screws and for operations where reverse rotation assists extraction. When used in a compatible Drilling Machine with left rotation, the design often allows the screw remnant to be turned out during drilling, improving salvage rates and reducing rework. Standardised quality for metalworking professionals Manufactured to DIN 338, the short cylinder‑shank design of this Twist Drill reflects industry standards for metalworking tools. Users benefit from a predictable, robust tool geometry that is suitable for alloyed and unalloyed steel, cast steel, spheroidal graphite cast iron, non‑ferrous metals and hard plastics. The Profi Line focus ensures consistent manufacturing tolerances and surface finish, helping maintain hole quality across batches. Who benefits most from this tool and how to get support Engineers, locksmiths and maintenance technicians who frequently encounter damaged fasteners or need reliable metal drilling in tight tolerances will value the specialised function of this left‑cutting Twist Drill. For complex applications or questions about machine compatibility, METAV Werkzeuge offers comprehensive, expert advice and can assist with selecting the correct drill geometry or recommending the appropriate machine settings. Strongly recommend MetavCUT left‑cutting Twist Drill for challenging metal and screw‑extraction tasks — for personalised technical advice contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical information Designation: Twist Drill (Spiralbohrer) Brand/Manufacturer: MetavCUT SKU: 60045-FDA Diameter: 4.5 mm Tip Angle: 135° Execution: left‑cutting (linksschneidend) Material: HSS‑G Standard: DIN 338 Intended Machine: Drilling Machine (Handbohrmaschine) Application: Drills for metal Model Series: Profi Line Notes: Bei einem Spiralbohrer bedeutet „linksschneidend“, dass er so geschliffen ist, dass er im Linkslauf richtig schneidet; typische Anwendung: abgebrochene/festsitzende Schrauben ausbohren; geschliffener HSS Bohrer ermöglicht bis zu 40 % schnelleres Bohren und benötigt 50 % weniger Anpresskraft als herkömmliche HSS‑Bohrer (Herstellerinfos) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The MetavCUT Twist Drill is primarily used for drilling and extracting in high‑strength materials; its left‑cutting grind makes it especially effective when removing broken or seized screws and when working with alloyed steels and hard plastics. Which three drill types are commonly distinguished? In general classification, the main drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drill category designed for machining metals. For what situations is a Twist Drill applied? A Twist Drill such as the MetavCUT model is most often applied when machining high‑strength materials and for larger drill diameters; its form is easy to regrind and it endures higher loads while maintaining cutting performance. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of a Twist Drill, lowering friction and thus reducing the required feed force; this also improves centring of the drill tip in the workpiece for more accurate holes.
4.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Meet the MetavCUT Twist Drill — Short Type N, 4.5 mm, HSS‑G, 135°, Bright Finished (DIN 338) The MetavCUT Twist Drill is a short Type N Twist Drill designed for precision metalworking with a 4.5 mm diameter and a 135° point angle for demanding materials Short Type N design for high stability and precision HSS‑G fully ground for up to 40% faster drilling 135° point angle: optimised for hard and stainless steels Conforms to DIN 338 for short twist drills Fully ground shank for secure clamping in drills High-performance drilling with less operator force The HSS‑G construction of this short Twist Drill delivers a measurable productivity advantage: the ground geometry enables up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS bits. This translates into reduced operator fatigue and shorter cycle times in repetitive metalworking operations. The 4.5 mm diameter combined with the 135° point angle is particularly effective for starting holes cleanly in tougher alloys, while the Type N spiral provides reliable chip evacuation under machine or handheld operation. Short design for maximum stability and precision A short overall length reduces overhang and flex, increasing drilling accuracy in critical applications. Conforming to DIN 338, the short configuration improves concentricity and minimizes runout when clamped in a chuck. The fully ground shank ensures secure clamping and consistent concentricity, making the tool ideal for setups where tight tolerances are required. These mechanical advantages help deliver repeatable hole quality in production and workshop contexts. Material suitability and application guidance This Twist Drill in HSS‑G is engineered for drilling a broad range of metals: alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper cast, non‑ferrous metals and hard plastics. The 135° point angle slows initial penetration slightly but improves centring and reduces wandering on curved or coated surfaces, which is beneficial for stainless steel and other hard materials. The Type N spiral denotes the classic metalworking geometry, optimised for metal and less suitable for very soft woods or highly abrasive masonry. Who benefits and practical handling notes Workshops, maintenance teams and precision machinists gain from the combined stability of the short design and the productivity of the ground HSS material. The Twist Drill is suitable for both drilling machines and hand drills when correct clamping and feed rates are observed. Regrinding is straightforward due to the ground geometry, extending service life when maintained properly. For queries about suitability for a specific application, METAV Werkzeuge provides expert technical consultation and support. Strong recommendation: Choose the MetavCUT HSS‑G short Twist Drill for precise, efficient metal drilling; for tailored technical advice or application support contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27045-FDA Diameter: 4.5 mm Point angle: 135° Type: Type N Material: HSS-G Standard: DIN 338 Execution: short Colour/Finish: bright finished Suitable for: Drilling Machine (Handbohrmaschine / Hand drill) Spiral length: 47 mm Overall length: 80 mm Shank finish: fully ground Model series: Basic Line Axite enrichment: HSS‑G: The ground HSS drill enables up to 40% faster drilling and requires 50% less feed force than conventional HSS drills. It is particularly suitable for drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast, non‑ferrous metals and hard plastics. DIN 338: Classifies short twist drills with cylindrical shank made of high‑speed steel. The 135° point angle is suitable for harder materials such as stainless steel. Type N: Normal spiral, classic metal drill geometry Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill (short Type N, HSS‑G) is mainly used for machining high‑strength materials and larger drill diameters. Its geometry allows easier regrinding and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The primary drill categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for metalworking applications.
4.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, Ø 4.5 mm, 135°, HSS‑G, bright finished, DIN 338 A short Twist Drill (Type N) designed for precise metalworking with drilling machines and hand drills. Short design increases rigidity and precision Ground HSS-G for sharp cutting and clean holes 135° tip for hard materials like stainless steel Suitable for drilling machines and handheld drills Conforms to DIN 338 for short cylindrical shank drills Precision and stability for demanding metalwork The short execution of this Twist Drill reduces overhang and therefore bending, delivering noticeably higher stability during machining. With a diameter of 4.5 mm and an overall length of 80 mm, the compact geometry is ideal for tight setups and precise centre‑to‑centre tolerance work. The Type N spiral is the classic geometry for metal drilling, while the DIN 338 designation guarantees standardised dimensions and performance expectations for short cylindrical‑shank drills. Faster cutting with lower feed force A ground HSS‑G flute geometry enables up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS variants under comparable conditions. This means shorter cycle times and reduced operator exertion when producing series holes in alloyed and unalloyed steels, cast steels, sintered irons and certain hard plastics. The 135° tip reduces initial point pressure and improves centring when entering harder materials, shortening dwell time on the workpiece surface. Applications and machine compatibility This Twist Drill is developed for drilling metal: steel, cast iron, non‑ferrous metals and hard plastics. It is suitable for both stationary drilling machines and portable hand drills where increased rigidity and accurate hole quality are required. The fully ground shank aids consistent clamping in chucks and collets, and the bright finished surface supports chip evacuation and inspection. Use coolant for deep or continuous cuts to preserve tip life and hole quality. Handling, life cycle and practical tips Because the flutes and geometry are produced by CNC grinding, the drill offers high runout accuracy and very sharp cutting edges, giving clean bores and reduced burr formation. Note that ground HSS drills can be more brittle than rolled variants; avoid excessive shock and use machine‑steady feeds. Re‑sharpening is possible but should be performed by experienced toolmakers to retain geometry. For optimal results, pair the drill with appropriate cutting speeds and lubricants for the specific metal being machined. For precision metal drilling tasks, choose the MetavCUT Twist Drill Type N short — METAV Werkzeuge provides expert advice and technical support: info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 45045-FDA Diameter: 4.5 mm Tip angle: 135° Type: Type N Execution: short Colour / Finish: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 338 Overall length: 80 mm Spiral length: 47 mm Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is primarily intended for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, offering reliable hole quality when used with correct speeds and cooling. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill is suitable for both stationary drilling machines and hand drills (Drilling Machine), but the short design particularly benefits setups that demand rigidity and precision; always ensure secure clamping and compatible cutting parameters. What are twist drills used for? Twist Drills are mainly applied when machining high‑strength materials and larger hole diameters; their form is easy to regrind and resists higher loads, making them suitable for demanding metalworking operations. Which 3 drill types exist? The three primary drill categories are metal drills, wood drills and stone/concrete drills.
4.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Spiralbohrer 4,5 mm »Profi Line« (HSS‑G, geschliffen) Der Spiralbohrer 4,5 mm in kurzer Ausführung bietet erhöhte Stabilität und eignet sich speziell für präzise Metallbohrungen an stationären und handgeführten Maschinen. Kurze Ausführung für höhere Stabilität HSS‑G geschliffen für präzise Metallbohrungen Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und Maschinenbetrieb DIN 338 konform, Profi Line Qualität Hohe Stabilität durch kurze Bauform Die kurze Bauform reduziert die Auskraglänge und minimiert das Verbiegen des Werkzeugs. Das Ergebnis ist eine bessere Rundlaufgenauigkeit und präzise Bohrlöcher selbst in anspruchsvollen Materialien. Für Anwender bedeutet das weniger Nacharbeit und verlässlichere Passungen bei Montage und Fertigung. Die kompakte Geometrie unterstützt zudem konstante Prozessbedingungen bei stationärem Einsatz. Effizienz bei harten Werkstoffen Der geschliffene HSS‑G Werkstoff kombiniert hohe Schnittfähigkeit mit guter Wärmebeständigkeit. Durch die optimierte Geometrie lassen sich Bohrungen bis zu 40 % schneller ausführen und es ist 50 % weniger Anpresskraft erforderlich als bei herkömmlichen HSS‑Bohrern. Dies reduziert Belastung auf Maschine und Werkstück und erhöht die Arbeitseffizienz bei Stahl, Guss und ähnlichen Werkstoffen. Passend für den Alltag in Werkstatt und Industrie Mit einem Durchmesser von 4,5 mm fällt der Bohrer in den Standard‑Bereich und eignet sich für typische Werkstattaufgaben, Montage und DIY‑Projekte. Die Kombination aus kurzer Ausführung und Profi Line Fertigungsqualität macht das Werkzeug zur guten Wahl für Anwender, die präzise Ergebnisse mit Handbohrmaschine oder Säulenbohrmaschine erzielen wollen. Durch die robuste Ausführung sind auch wiederholte Einsätze ohne Qualitätsverlust möglich. Normgerechte Fertigung und Materialcharakteristik Die Fertigung nach DIN 338 sichert reproduzierbare Abmessungen und Qualitätsmerkmale. Die geschliffene Schaft‑ und Nutengeometrie sorgt für scharfe Schneiden und sauberen Spanfluss, ist aber empfindlicher gegenüber unkontrollierter Krafteinleitung. Anwender sollten daher stationäre Spannmittel und bei Bedarf Kühlung einsetzen, um die Standzeit optimal zu nutzen. Anwendungstipps für dauerhaft gute Ergebnisse Vor dem Bohren empfiehlt sich das Anpunkten mit einem Zentrierbohrer, um Wandern zu vermeiden. Bei 4,5 mm Durchmesser ist zentrisches Anstechen besonders hilfreich für präzise Passungen. Verwenden Sie moderate Schnittgeschwindigkeiten, passende Kühlschmierstoffe und vermeiden Sie übermäßigen Vorschub, um Bruchrisiken zu minimieren. So bleibt die Leistung des Bohrers über viele Einsätze konstant erhalten. Empfehlung: Vertrauen Sie der Profi Line von MetavCUT und wählen Sie diesen Spiralbohrer für präzise Metallbohrungen; bei technischen Fragen oder zur Beratung erreichen Sie Metav per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Leistungsmerkmale Artikelnummer: 48045-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Profi Line Norm: DIN 338 Typ: Typ N Fakten Durchmesser: 4,5 mm Gesamtlänge: 80 mm Spirallänge: 47 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (geschliffen, hohe Schärfe) Schaftausführung: geschliffen (vollständig) Ausführung: kurz (reduzierte Auskraglänge) Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien ist der Bohrer geeignet? Der Spiralbohrer von MetavCUT aus der Profi Line ist vor allem für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff geeignet und liefert saubere Bohrbilder. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung und die robuste Schaftgeometrie ermöglichen den Einsatz an Handbohrmaschinen; für höchste Präzision empfiehlt sich jedoch die Nutzung an stationären Maschinen. Was bedeutet HSS‑G geschliffen konkret? HSS‑G steht für Schnellarbeitsstahl geschliffen; diese Fertigungsart sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit, eignet sich daher besonders für Metallarbeiten mit hoher Genauigkeit. Warum wird ein Spitzenwinkel von 135° eingesetzt? Der Spitzenwinkel 135° reduziert die Anbohrkräfte und ist speziell für harte Werkstoffe wie Edelstahl und gehärtete Stähle geeignet, da er das Einstechen gleichmäßiger verteilt. Wodurch unterscheidet sich die kurze Ausführung von Standardbohrern? Die kurze Ausführung hat eine geringere Auskraglänge und bietet dadurch höhere Stabilität und weniger Verformung beim Einbohren, was besonders bei präzisen Bauteilen Vorteile bringt.
4.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
MetavCUT Twist Drill — short HSS‑G, TIN‑coated, Ø 4.5 mm, 118° The MetavCUT Twist Drill is a short HSS‑G drill bit designed for precise metalworking on drilling machines and hand drills, optimised for stability and long tool life. Short design for higher rigidity and precision TIN‑coating extends tool life for metal drilling Fully ground shaft for clean, accurate holes Complies with DIN 338 for short twist drills Fast cutting with reduced feed force Greater Precision through a Short, Stable Design The short configuration of this Twist Drill reduces the exposed length and significantly improves Stability during machining. This leads to less bending and a more accurate hole position when working on vertical or portable drilling machines. For users who require repeatable, tight tolerances, the reduced overhang is a clear practical advantage that minimises rework and scrap. Coating and Material for Longer Service Life Equipped with a TiN (Titanium Nitride) coating and made from HSS‑G, this drill offers enhanced wear resistance when machining steels and non‑ferrous metals. The coating lowers friction and, with appropriate cooling, reduces abrasion so that tool life is extended. In many workshop applications the fully ground HSS formulation enables up to 40% faster drilling and requires around 50% less feed force, improving efficiency and operator comfort. Application Range and Practical Use The MetavCUT short Twist Drill is intended for metalworking and performs well in alloyed and unalloyed Steel, Tempered Cast Iron, Cast Iron, Bronze, Copper, Neusilber and Hard Plastics. It is suitable for use in both stationary machines and hand‑held drilling devices when proper clamping and alignment are ensured. Use cutting fluid or a cooling system for best results in tougher materials to avoid premature wear or breakage. Why DIN 338 and the Fully Ground Shaft Matter Manufactured according to DIN 338, this short twist drill follows standardised dimensions and geometric features for reliable interchangeability. The designation HSS‑G (ground) means the flutes and cutting geometry are produced by grinding rather than rolling, resulting in sharper cutting edges, excellent concentricity and cleaner hole surfaces. Note that ground drills can be more brittle; therefore controlled feed, correct clamping and coolant use are recommended for prolonged tool life. Strong recommendation: For precision metal drilling, choose MetavCUT tools and consult METAV Werkzeuge for tailored advice — professional support is available by eMail, phone or WhatsApp at the contact details below Are you unsure whether this tool fits your needs? METAV Werkzeuge provides extensive technical consultation: info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 28045-FDA Diameter: 4.5 mm Point Angle: 118° Overall Length: 80 mm Spiral Length: 47 mm Execution: short Shaft Execution: fully ground Coating/Colour: TIN-coated Material: HSS-G Model Series: Basic Line Application: Drills for metal For Use In: Drilling Machine / Hand Drill Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Twist Drill be used in hand drills or only in machines? The MetavCUT Twist Drill is suitable for both drilling machines and careful use in hand drills, provided the workpiece is securely clamped and the drill is guided to avoid lateral stress. The short design increases rigidity, which helps when using portable equipment, but for best results and longest life a stationary drilling machine with coolant is recommended. What is a Twist Drill mainly used for? A Twist Drill like the MetavCUT Twist Drill is primarily applied to the machining of high‑strength materials and larger diameters; its geometry is easily resharpened and it withstands substantial loads, making it ideal for demanding Metal Drilling tasks. Which three drill types exist? Common categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill belongs to the Metal Drill group and is optimised for use in metalworking applications.
4.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Wirtschaftlichkeit, Haltbarkeit und Präzision verbinden sich in diesem Spiralbohrer zu einem effizienten Werkzeug für Metallarbeiten. Die TiN-beschichtete Oberfläche reduziert Reibung und verlängert die Lebensdauer, während die geschliffene HSS-G-Geometrie und die kurze Ausführung für stabile, präzise Bohrungen sorgen. Bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere Beratung an. Spiralbohrer 4,5 mm von MetavCUT – kurzer HSS-G Bohrer (Typ N) Der Spiralbohrer 4,5 mm ist ein kurzer, geschliffener HSS-G Bohrer, ausgelegt für präzise Bohrungen in legierten und unlegierten Stahl sowie in Guss- und Nichteisenmetallen. Spiralbohrer »Spiralbohrer« von MetavCUT TiN-Beschichtung reduziert Reibung und Verschleiß Geschliffen: hohe Rundlaufgenauigkeit Kurze Ausführung für stabile Präzisionsbohrungen Spitzenwinkel 135° für harte Werkstoffe Hohe Standzeit durch Beschichtung und Materialwahl Die Kombination aus HSS-G und TiN-beschichteter Oberfläche sorgt für eine spürbar längere Standzeit bei Metallbearbeitung. Durch die Titan-Nitrid-Beschichtung verringert sich die Reibung an der Schneide, was Wärmeentwicklung und Werkzeugverschleiß reduziert. Für Anwender bedeutet das weniger Werkzeugwechsel, höhere Ausbringung und geringere Stillstandzeiten bei Serien- und Einzelfertigung. Kurz ausgeführte Bauform für präzise Ergebnisse Die kurze Ausführung reduziert die Auskraglänge und verbessert dadurch die Stabilität während des Bohrens. Diese Konstruktion minimiert das Verbiegen und Wandern des Werkzeugs, wodurch saubere Bohrbilder und engere Toleranzen erzielt werden. Besonders bei stationären wie auch handgeführten Maschinen ist die kürzere Bauform vorteilhaft, weil sie kontrollierten Vorschub und bessere Rundlaufgenauigkeit ermöglicht. Geschliffene Geometrie und Schneidvorteile Durch den CNC-basierten Schliff der Spannuten erreicht der Bohrer eine scharfe Kantengeometrie und hohen Rundlauf. Die geschliffene Ausführung unterstützt ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft im Vergleich zu konventionellen HSS-Bohrern. Anwender profitieren von schnellerem Arbeitsfortschritt und ergonomischerer Handhabung, vor allem bei der Bearbeitung harter Werkstoffe. Eignung und Anwendungsempfehlung für Werkstatt und Montage Mit einem Durchmesser von 4,5 mm fällt das Produkt in den Standard-Bereich für Alltagsanwendungen und eignet sich für Werkstatt, Montage und anspruchsvolle DIY-Projekte. Der Typ N Normalspirale ist für Metall bohrungen konzipiert und eignet sich besonders für legierte und unlegierte Stähle, Temperguss, Gusseisen sowie Nichteisenmetalle. Bei stationären Einsätzen empfiehlt sich eine Kühlmittelzufuhr, um die Lebensdauer weiter zu erhöhen. Für präzise Metallbohrungen empfiehlt MetavCUT die Verwendung dieses kurz ausgeführten, TiN-beschichteten HSS-G Bohrers; bestellen Sie unkompliziert über Metav und kontaktieren Sie uns bei Detailfragen per eMail info@metav-werkzeuge.com Produktmerkmale Artikelnummer: 46045-FDA Marke: MetavCUT Serie: Standard Line Daten Durchmesser: 4,5 mm Gesamtlänge: 80 mm Spirallänge: 47 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Norm: DIN 338 Farbe: TIN-beschichtet Schaft Ausführung: geschliffen Typ: Typ N Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 SKU: 46045-FDA FAQ Für welche Materialien eignet sich der Bohrer primär? Der MetavCUT Spiralbohrer in 4,5 mm eignet sich primär für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie für Nichteisenmetalle und Hartkunststoff. Die Kombination aus HSS-G und TiN-beschichtung macht ihn besonders geeignet für anspruchsvolle Metallarbeiten. Ist die kurze Ausführung auch für Handbohrmaschinen geeignet? Ja, die kurze Ausführung ist für Handbohrmaschinen geeignet und bietet durch die reduzierte Auskraglänge bessere Stabilität. Bei handgeführten Anwendungen empfiehlt sich dennoch kontrollierter Vorschub und gegebenenfalls Anpunktieren für höchste Präzision. Welche Vorteile bringt die geschliffene Schaftausführung? Die geschliffene Ausführung sorgt für scharfe Kanten und hohe Rundlaufgenauigkeit, was sauberere Bohrlöcher und reproduzierbare Ergebnisse ermöglicht. Bei Verwendung des MetavCUT Spiralbohrers zeigt sich dies besonders in präzisen Metallbohrungen. Woraus ergibt sich die höhere Bohrgeschwindigkeit und verringerte Anpresskraft? Die Geometrie und der CNC-Schliff der Spannuten führen zu effizienterer Spanabfuhr und geringeren Reibungsverlusten. Dadurch kann der Bohrer bis zu 40 % schneller bohren und benötigt etwa 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern.
4.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Kombinieren Sie die hohe Stabilität der kurzen Ausführung mit der Verschleißfestigkeit der TiN-Beschichtung für präzise Metallbohrungen. Profitieren Sie von schnellerem Vorschub und geringerem Anpressdruck dank geschliffener Geometrie. Bestellen Sie den Spiralbohrer direkt über Metav oder lassen Sie sich vor dem Kauf fachkundig beraten. Spiralbohrer 4,5 mm (HSS-G, TIN-beschichtet) – MetavCUT Profi Line Spiralbohrer 4,5 mm in kurzer Ausführung für präzises Bohren in Stahl und NE-Metallen mit hoher Standzeit Kurze Ausführung für hohe Stabilität HSS-G geschliffen für scharfe Kanten TiN-Beschichtung reduziert Reibung und Verschleiß Spitzenwinkel 135° für härtere Werkstoffe Geeignet für Handbohrmaschine und Werkstattbetrieb Höhere Präzision durch kurze Auskraglänge Die kurze Bauform sorgt für deutlich weniger Ausschlag und eine höhere Stabilität beim Bohren. Durch die verminderte Auskraglänge bleibt die Bohrung runder und Maßtreuer, was besonders bei Passungen und Montagebohrungen zählt. Der geschliffene Schaft und die präzise Geometrie ermöglichen ein bis zu 40% schnelleres Bohren bei gleichzeitig etwa 50% reduzierter Anpresskraft im Vergleich zu Standard-HSS-Bohrern. Längere Lebensdauer durch Beschichtung und Materialwahl Die Kombination aus HSS-G und TiN-beschichtung minimiert den Verschleiß bei Metallbearbeitung. Die Dünnschicht verringert die Reibung und erhöht die Wärmebeständigkeit, wodurch sich die Standzeit im Einsatz mit geeigneter Kühlung erhöht. Diese Eigenschaften machen den Bohrer zur guten Wahl für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle. Praktische Einsatzbereiche und Maschinenkompatibilität Mit einem Durchmesser von 4,5 mm liegt der Bohrer im Standard-Bereich und eignet sich für Werkstatt, Montage und DIY-Anwendungen. Er ist kompatibel mit Handgeführten Bohrmaschinen und stationären Geräten und verarbeitet dünne bis mittlere Bleche sowie Profile zuverlässig. Für hochpräzise Bohrungen empfiehlt sich vorheriges Anpunkten, um das Wandern des Bohrers zu minimieren. Fertigung, Normen und Anwendungshinweise Der Spiralbohrer entspricht der DIN 338 und ist als Typ N mit Normalspirale ausgeführt, was ihn zum universellen Metallbohrer macht. Die geschliffene Herstellung garantiert sehr scharfe Schneiden und hohen Rundlauf, erfordert aber sachgemäße Kühlung und stationäre Spannbedingungen, um Bruchrisiken zu reduzieren. Der Spitzenwinkel 135° unterstützt das Anbohren harter Werkstoffe wie Edelstahl. Empfehlung: MetavCUT Profi Line Kurzbohrer mit TiN-Schicht für präzise Metallbearbeitung über Metav anfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 41045-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 4,5 mm Gesamtlänge: 80 mm Spirallänge: 47 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Beschichtung: TIN-beschichtet Schaftausführung: geschliffen (Zylinderschaft) Norm: DIN 338 Typ: Typ N Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der Spiralbohrer MetavCUT Profi Line (Spiralbohrer, SKU 41045-FDA) ist besonders geeignet für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Ist der Bohrer für Handgeführte Akkubohrschrauber geeignet? Ja, der Spiralbohrer MetavCUT Profi Line wurde für Werkstatt- und Montageeinsätze konzipiert und lässt sich mit Handgeführten Bohrmaschinen verwenden, wobei Anpunkten bei hoher Präzision empfohlen wird. Welche Vorteile bietet die TiN-Beschichtung konkret? Die TiN-beschichtung des MetavCUT Profi Line Spiralbohrers vermindert Reibung, verbessert die Wärmebeständigkeit und verlängert damit die Standzeit unter geeigneter Kühlung. Warum ist der Bohrer geschliffen und was bedeutet das für die Anwendung? Die geschliffene Ausführung (HSS-G) der MetavCUT Profi Line liefert sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, erfordert jedoch vorsichtigen Einsatz und Kühlung, da geschliffene Bohrer spröder sein können. Worauf ist beim Bohren mit Spitzenwinkel 135° zu achten? Ein Spitzenwinkel von 135° beim MetavCUT Profi Line Spiralbohrer erleichtert das Anbohren harter Werkstoffe und reduziert das Ausbrechen, vor allem bei Edelstahl und gehärteten Stählen.
4.5mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill — HSS‑G Metal Twist Drill, Ø 4.5 mm, 135° Tip, DIN 338, W‑style Tip The Twist Drill for Drilling Machines is a high‑performance HSS‑G metal drill engineered for fast, low‑effort boring in alloyed and unalloyed steels and a wide range of non‑ferrous materials. Rapid HSS‑G cutting for faster drilling 135° tip for hardened steels Conforms to DIN 338 short twist drills Multi‑bevel W‑style tip for clean starts For use in Drilling Machines and hand drills Engineered for faster, lower‑effort metal drilling with measurable gains Designed for professional metalworking, the HSS‑G composition delivers high hardness and thermal stability while the specially ground geometry provides up to 40% faster drilling and requires 50% less feed force compared with conventional HSS drills. This means less operator fatigue and higher throughput on repetitive tasks. The HSS‑G material also permits straightforward regrinding, so the tool life and cost efficiency remain attractive for demanding workshop cycles. Secure centring and clean holes in tougher materials thanks to a 135° tip A 135° tip angle reduces the risk of walking on difficult surfaces and shortens the plunge phase when working with stainless and tempered steels. The precision ground W‑style cutting edge ensures a clean entry with minimal burr formation, producing holes with better edge quality and less need for rework. Conformance to DIN 338 classifies the tool as a short twist drill with cylindrical shank, making its performance predictable on stationary and portable drilling equipment. Machine‑compatible design and practical dimensions for everyday use With a nominal Diameter of 4.5 mm, Spiral Length of 47 mm and an Overall Length of 80 mm, this tool fits standard chucks and is suitable for both Drilling Machines and hand drills used in workshops and maintenance environments. The Shaft Execution is supplied with multi‑bevel cutting edge, without triangular shank, allowing secure clamping in cylindrical holders while delivering reliable chip removal. Such dimensions and form factor simplify inventory planning and ensure compatibility with common setups. Who benefits and how to maintain peak performance Maintenance is straightforward: the HSS‑G substrate can be re‑sharpened on standard tool grinders, restoring cutting geometry and extending service life. Target users include machinists, maintenance technicians and metal fabricators who need a resilient, easy‑handled drill for mixed materials like alloyed steel, cast iron, non‑ferrous metals and engineering plastics. Regular inspection of cutting edges and modest cooling during prolonged runs protect tool life and optimise drilling quality. Strongly recommended for professional metalworking: choose MetavCUT HSS‑G Twist Drills for reliable, faster holes — for technical advice or to confirm suitability, METAV Werkzeuge offers expert consultation via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Precise Technical Specifications for Reliable Workshop Use Designation: Twist Drill Brand: MetavCUT SKU: 55045-FDA Diameter: 4.5 mm Tip Angle: 135° Spiral Length: 47 mm Overall Length: 80 mm Material: HSS‑G Standard: DIN 338 Shaft Execution: with multi‑bevel cutting edge, without triangular shank Model Series: Spezial Application: Drills for metal For Drill: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for, and which materials suit the MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily designed for metalworking; it is used for drilling alloyed and unalloyed steels, cast materials and many non‑ferrous metals as well as hard plastics. Its ground geometry and HSS‑G material allow efficient, precise holes in demanding applications where speed and edge quality are important. Which three drill types are commonly used? Commonly distinguished drill types are: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill family and is optimised for metalworking tasks. For what purpose are twist drills most often used? Twist Drills are mainly applied to the machining of high‑strength materials and larger diameters. Their shape allows relatively simple regrinding and they withstand greater loads, which makes them the standard choice for through‑hole drilling in engineering applications. Why are twist drills pointed (ground to a tip)? Pointing a Twist Drill reduces the cross‑cut at the tip, lowering friction and thus requiring smaller feed forces; this improves centring and makes hole starts cleaner. The pointed geometry also helps to guide the drill precisely into the workpiece, reducing walking and burr formation. If you are unsure whether this tool matches your application or need further technical data, METAV Werkzeuge provides comprehensive and competent advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 or WhatsApp +49 170 2837271
4.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G Twist Drill, 4.5 mm, 135° tip, Bright finished, Fully ground, DIN 340 The Twist Drill is a long‑version metal drilling bit designed for deep and hard‑material drilling with drilling machines and hand drills. Long design for deeper, hard‑to‑reach holes 135° tip for reliable entry into hard materials Fully ground HSS‑G for precise, clean holes DIN 340 standard for industrial compatibility Reach deep holes reliably with the long design The long execution of this Twist Drill (Total Length 126 mm, Spiral Length 82 mm) is ideal when holes must be drilled far from the workpiece edge or in recessed positions. The extended Spiral Length reduces the need for extensions or special fixtures, allowing deeper boreholes with consistent chip evacuation. This makes the bit particularly useful in maintenance, toolroom tasks, and assembly work where access is limited and reliability matters. Faster cutting and easier feed thanks to fully ground HSS‑G The HSS‑G material and fully ground flute geometry provide a sharper cutting edge and high concentricity. Compared with rolled HSS variants, a ground Twist Drill can cut up to 40% faster and requires significantly less feed force, which reduces operator fatigue and improves spindle load behaviour. The ground geometry also creates cleaner hole walls in alloyed and unalloyed steels, cast materials and non‑ferrous metals. Optimised tip geometry for harder materials A 135° tip angle reduces the tendency to wander on hard surfaces and shortens initial penetration time in tough materials such as stainless steels. The flatter tip distributes cutting forces better and is recommended when drilling high‑strength steels and cast materials up to the limits specified by the DIN 340 family. For best results, combine with appropriate coolant and moderate spindle speeds to balance tool life and surface finish. Practical guidance for use and durability The bright finished surface improves corrosion resistance and visual inspection, while the fully ground shank ensures a secure clamping fit in drill chucks. Although ground HSS bits can be more brittle than rolled types, correct coolant use and controlled feed rates extend service life considerably. For stationary machining and demanding metalworking applications, the Standard Line model offers a balanced compromise between performance and tool robustness. We recommend the MetavCUT Twist Drill for professionals who require deep, precise holes in metal — for personalised application advice or technical clarifications contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill Marke: MetavCUT SKU: 53045-FDA Diameter: 4.5 mm Total Length: 126 mm Spiral Length: 82 mm Tip Angle: 135° Material: HSS‑G Execution: long Shank execution: fully ground Colour / Finish: bright finished For Drilling Machine: Drilling Machine / Hand Drill Application: Drills for metal Model Series: Standard Line Norm: DIN 340 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can this Twist Drill be used in a hand drill or only in a machine? The MetavCUT Twist Drill is suitable for both drilling machines and hand drills, but for best precision and tool life use in a stable chuck with controlled speeds; heavier use in stationary machines with coolant is recommended for harder materials. What is a Twist Drill used for? A Twist Drill is primarily applied to the machining of high‑strength materials and larger bore diameters; it is relatively easy to regrind and withstands high cutting loads, making it suitable for alloyed and unalloyed steels, cast materials and other demanding applications. Which three drill types are there? The main drill categories are metal drills (such as HSS Twist Drills), wood drills, and stone/concrete drills.
4.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Robuste HSS-Konstruktion und kurze Ausführung bieten hohe Stabilität und präzise Bohrung in Stahl; die DIN 338-Konformität gewährleistet Kompatibilität mit stationären Bohrmaschinen. Bestellen Sie den Spiralbohrer direkt über Metav oder kontaktieren Sie unsere Beratung für technische Details und Einsatzempfehlungen. Spiralbohrer von MetavCUT – kurzer HSS Twist Drill für Metallbearbeitung Der Spiralbohrer von MetavCUT ist ein kurzer HSS-Spiralbohrer, der für präzise Metallbohrungen an stationären und handgeführten Maschinen konzipiert wurde HSS-Material für legierten und unlegierten Stahl DIN 338: kurze Spiralbohrer für stationäre Maschinen Typ N-Normalspirale optimal für Metallbohrungen Ø 4,6 mm mit hoher Stabilität bei kurzer Ausführung Geeignet für Handbohrmaschine und stationäre Maschinen Stabilität durch kurze Ausführung und HSS-Material für saubere Bohrungen Die Kombination aus HSS-Werkstoff und kurzer Konstruktion reduziert die Auslenkung während des Bohrens und minimiert das Bruchrisiko bei kleinen Durchmessern. Durch die kurze Ausführung verringert sich die Auskraglänge, was eine höhere Rundlaufstabilität und damit sauberere Bohrbilder in Stahl und Gusseisen ermöglicht. Anwender profitieren von geringerer Nacharbeit und konstanter Maßhaltigkeit. Präzision beim Anbohren und Empfehlungen für Spitzenwinkel Für viele Metallarten bietet der Spitzenwinkel 118° ein ausgewogenes Anbohrverhalten; dieser Winkel erleichtert das Zentrieren auf gewölbten Oberflächen und eignet sich besonders für legierte und unlegierte Stähle. Für härtere Werkstoffe kann ein anderer Spitzenwinkel sinnvoll sein; bei Standardanwendungen in Werkstatt und Montage ist die Einstellung 118° jedoch oft die wirtschaftlichste Wahl. Einsatzgebiete, Maschinentypen und Durchmesser-Cluster Mit Ø 4,6 mm liegt der Bohrer im Standard-Bereich, ideal für Werkstatt, Montage und DIY-Projekte. Die Ausführung eignet sich für dünne bis mittlere Bleche, Profile und Flachstähle sowie für Handbohrmaschine und stationäre Säulenbohrmaschinen. Bei Anforderungen an hohe Serienraten oder extrem gehärtete Werkstoffe sollte auf Vollhartmetall oder spezialisierte Werkzeuge ausgewichen werden. Handhabung, Vorschub und praktische Tipps für saubere Ergebnisse Vor dem Bohren empfiehlt sich leichtes Anpunkten zur Vermeidung von Wandern, besonders bei Handbohrmaschinen. Kühlung reduziert Wärmeeintrag und verlängert die Lebensdauer des Werkzeugs; Schneidöl ist bei Stahlbearbeitung empfohlen. Die Spirallänge 47 mm bietet genügend Spanraum für mittlere Bohrtiefen und unterstützt zuverlässige Spanabfuhr bei häufigen Werkstattaufgaben. Sichern Sie sich die präzise HSS-Qualität von MetavCUT und bestellen Sie über Metav oder kontaktieren Sie uns per eMail an info@metav-werkzeuge.com beziehungsweise telefonisch unter +49 2822 7131930 – wir beraten bei Einsatz und Maschinenauswahl. Produktmerkmale Artikelnummer: 40046-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Typ: Typ N Material: HSS Norm: DIN 338 Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Fakten Durchmesser: 4,6 mm Gesamtlänge: 80 mm Spirallänge: 47 mm Spitzenwinkel: 118° Besonderheiten Typ: Typ N (Normalspirale, Metall) Material: HSS (Schnellarbeitsstahl) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz (hohe Stabilität, geringe Auskragung) Farbe: schwarz FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer in HSS eignet sich vor allem für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; bei sehr harten Stählen kann ein anderes Werkzeug wirtschaftlicher sein. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung und der Durchmesser von 4,6 mm machen den Spiralbohrer von MetavCUT kompatibel mit Handbohrmaschine und bieten ausreichend Stabilität für typische Werkstattanwendungen. Welcher Spitzenwinkel ist verbaut und warum? Der Spiralbohrer verfügt über einen Spitzenwinkel von 118°, der eine gute Balance aus Zentrierverhalten und Vorschub erzielt und sich gut für viele Stahlarten eignet. Wie tief kann mit diesem Bohrer sicher gebohrt werden? Die Spirallänge von 47 mm und die Gesamtlänge von 80 mm erlauben mittlere Bohrtiefen; für sehr tiefe Sacklochbohrungen sind abgestufte Vorgehensweisen oder spezielle Werkzeuge empfehlenswert. Welche Norm gilt für diesen Bohrer und welche Vorteile bringt sie? Die Einhaltung der DIN 338 garantiert die standardisierte Bauform kurzer Spiralbohrer mit Zylinderschaft und erleichtert die Auswahl für stationäre Maschinen sowie die Vergleichbarkeit technischer Daten.
4.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Dieser kurze Abriss fasst die Stärken zusammen: HSS-E für erhöhte Standzeit, die kurze Ausführung für maximale Stabilität und der 135° Spitzenwinkel für sicheres Anbohren in harten Werkstoffen sorgen für präzise Ergebnisse. Bestellen Sie das Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. MetavCUT Spiralbohrer 4,6 mm — Standard Line (kurze Ausführung) MetavCUT Spiralbohrer 4,6 mm in kurzer Ausführung für präzise Metallbearbeitung mit Handbohrmaschine Kurze Ausführung für hohe Stabilität HSS-E mit 5% Kobalt für längere Standzeit Geschliffen: Hohe Rundlaufgenauigkeit und scharfe Schneiden DIN 338 Klassifizierung für kurze Spiralbohrer 135° Spitzenwinkel ideal für harte Werkstoffe Präzision durch kompakte Bauweise für saubere Bohrbilder Die kurze Ausführung reduziert die Auskraglänge und minimiert Vibrationen, wodurch saubere Bohrbilder und hohe Maßhaltigkeit erreicht werden. Dieses Bohrwerkzeug ist speziell für stationäre und handgeführte Anwendungen konzipiert, bei denen Stabilität und kontrollierter Vorschub wichtiger sind als große Reichweite. Anwender profitieren von geringerem Wanderverhalten beim Anbohren und einer zuverlässigeren Zentrierung auf der Oberfläche. Langlebigkeit und Einsatz in anspruchsvollen Materialien Der Einsatz von HSS-E mit 5% Kobalt erhöht die Warmfestigkeit und Widerstandsfähigkeit gegen Verschleiß, deshalb eignet sich der Kurzbohrer besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle. Der 135° Spitzenwinkel verringert die Anbohrkraft bei harten Werkstoffen und verlängert die Werkzeuglebensdauer. Durch fachgerechte Kühlung und stationären Einsatz lässt sich die Performance weiter optimieren. Geschliffene Geometrie für höchste Genauigkeit Die geschliffene Schaft- und Spannutengeometrie garantiert scharfe Schneiden und hervorragende Rundlaufgenauigkeit. Das Resultat sind präzise, gratarme Bohrungen mit definierten Toleranzen. Für Anwendungen, die saubere Passungen verlangen oder nachbearbeitungsarme Ergebnisse benötigen, bietet diese Ausführung klare Vorteile gegenüber gewalzten Varianten. Geeignete Einsatzbereiche und Anwenderhinweise Im Standard-Bereich (2,0–13,0 mm) ist dieses Werkzeug ideal für Werkstatt, Montage und überwiegende Metallbearbeitung. Bei Handbohrmaschinen empfiehlt sich ein ruhiger Vorschub und gegebenenfalls Vorzentrieren mit einem Zentrierbohrer, um das Wandern zu minimieren. Für tiefe oder großserielle Bohrungen sind spezialisierte Aufbohrverfahren oder andere Werkzeugtypen wirtschaftlicher. Empfehlen Sie das MetavCUT Kurzbohrersystem mit HSS-E für präzise Metallbohrungen; bei Fragen stehen unsere Techniker zur Verfügung – per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Leistungsmerkmale Artikelnummer: 47046-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Typ: Typ N Norm: DIN 338 Zahlen Durchmesser: 4,6 mm Gesamtlänge: 80 mm Spirallänge: 47 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-E (Schnellarbeitsstahl, 5% Kobalt erhöht Warmfestigkeit) Schaftausführung: geschliffen (CNC-Schliff für hohe Rundlaufgenauigkeit) Ausführung: kurz (reduzierte Auskraglänge, höhere Stabilität) Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall (legierter und unlegierter Stahl, Gusseisen, Nichteisenmetalle, Kunststoffe) Normhinweis: DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft FAQ Kann der Spiralbohrer für Edelstahl verwendet werden? Der MetavCUT Spiralbohrer aus HSS-E mit 135° Spitzenwinkel ist für harte Werkstoffe geeignet und kann für viele Edelstahlarten verwendet werden, allerdings empfiehlt sich konstante Kühlung und angepasste Schnittgeschwindigkeit; bei sehr zähen Edelstählen sind speziell legierte Sorten zu prüfen. Welche Bohrmaschine ist passend für dieses Werkzeug? Für stationäre Säulenbohrmaschinen und Handbohrmaschinen ist der MetavCUT Spiralbohrer 4,6 mm (SKU 47046-FDA) geeignet; bei Handgebrauch auf stabile Führung und Vorzentrierung achten, um Bruchrisiken zu minimieren. Worin liegt der Unterschied zwischen geschliffenen und gewalzten Bohrern? Geschliffene Bohrer, wie dieser Kurzbohrer, bieten schärfere Schneiden und bessere Rundlaufgenauigkeit, was zu präziseren Bohrlöchern führt; gewalzte Varianten sind tendenziell zäher, aber weniger scharf. Für welche Materialien ist dieser Kurzbohrer besonders empfohlen? Der MetavCUT Spiralbohrer eignet sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe, dank HSS-E und der kurzen Bauform für stabile Bearbeitung. Wie verhält sich der Bohrer bei tiefen Bohrungen? Bei Bohrungen über das Fünffache des Durchmessers hinaus empfiehlt sich mehrstufiges Vorgehen oder spezielle Spiralgeometrien; für das hier angebotene Kurzformat sind eher flachere Durchdringungen und präzise, kontrollierte Einsätze vorgesehen.
4.6mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — Double-sided Twist Drill, 4.6 mm, 135° Point, HSS-G, Bright Finished, Fully Ground Shank, Standard Line by MetavCUT The Body Drill is a double-sided Twist Drill designed for precise metalworking with Drilling Machines, offering fast penetration and reliable hole quality for sheet metal, castings and alloyed steels. Double-sided design for reversible use HSS-G material for precise metal drilling 135° point angle for harder materials Fully ground shank for high concentricity Bright finished surface for improved corrosion resistance Faster, cleaner holes thanks to precision engineering Manufactured for demanding metal applications, this Twist Drill combines a HSS-G cutting geometry with a 135° point angle to reduce chatter and improve centring in hard materials. The ground flute geometry provides sharp cutting edges and consistent chip evacuation, which means fewer restarts and a more predictable drilling process. For workshops that rely on repeatable results, this configuration lowers scrap rates and shortens cycle times. Practical benefits of the double-sided, fully ground design A double-ended layout lets the operator use both ends, effectively doubling tool life per piece and reducing tool changes. The fully ground shank ensures excellent concentricity in chucks and collets, minimising runout and vibration during high-speed operation. This results in cleaner Bohrlöcher and less secondary finishing, especially when working with thin sheet metal and structural parts. Where this drill excels and who benefits most The tool is optimised for metalworking: suitable for legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle and hard plastics. Professionals in Bodywork, Maintenance and Production will value the combination of robustness and precision. Workshops using portable Drilling Machines or small stationary units benefit from the reversible tip and the reliable performance of a ground HSS geometry. Handling recommendations and machining tips To preserve tool life, use appropriate cutting speeds for the material and apply coolant where possible, particularly for stainless steels. The Bright Finished surface eases chip release and reduces corrosion risk during storage. Because the drill is ground rather than rolled, it delivers superior hole quality but can be more brittle; avoid excessive side loads and use steady axial feed to prevent breakage. Strong recommendation: choose MetavCUT quality for demanding metal drilling — for further technical advice or selection help contact METAV Werkzeuge for expert support eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Information Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58046-FDA Diameter: 4.6 mm Point angle: 135° Overall length: 58 mm Spiral length: 13 mm Execution: double sided Shank finish: fully ground Colour: bright finished Material: HSS-G Application: Drills for metal Model series: Standard Line For use with: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Body Drill from MetavCUT used for and which machine fits best? The MetavCUT Body Drill is a double-sided Twist Drill intended for metalworking and is primarily used with handheld Drilling Machines or small bench drills where precise, repeatable holes in sheet and cast materials are required. Can the MetavCUT Body Drill be used for different metal types? The MetavCUT Body Drill with HSS-G construction is suitable for alloyed and unalloyed steels, cast steel, cast iron, non-ferrous metals and hard plastics, offering clean holes and reliable tool life under proper cutting conditions. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high-strength materials and large drill diameters. Its geometry is easy to grind and withstands higher loads, making it suitable for holes in demanding metals. Which three drill types exist? The three main drill types are metal drills, wood drills, and stone/concrete drills. Why are Twist Drills pointed? Pointing reduces the cross-cut at the tip of a Twist Drill. This lowers frictional forces so less feed force is required and improves the drill's centring in the workpiece. Can a metal drill be used for wood drilling? Metal drills can be used in wood, but they offer poorer guidance and less clean results compared with dedicated wood drills. Their advantage is easier resharpening and a reduced tendency to self-feed.
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com