Twist Drill Bits for Professionals: Quality You Can Rely On

Twist Drill (Type N) — 7 mm, 135° tip, short, 5% cobalt-alloyed, HSS‑E, DIN 338 by MetavCUT The Twist Drill Type N is a short, fully ground metalworking drill for Drilling Machine use, optimised for precise holes in hard materials and professional shop environments. Short design for higher stability 7 mm diameter for standard metal holes 135° tip angle for harder materials like stainless steel HSS‑E with 5% cobalt for improved wear resistance Precision and stability for accurate metal holes The short execution of this Twist Drill reduces overhang and thus significantly lowers the tendency to bend or wander during machining, delivering higher stability and improved concentricity. With a Spiral Length of 69 mm and a Total Length of 109 mm, the reduced cantilever ensures cleaner holes and better roundness when used in stationary or bench Drilling Machines. This geometry is particularly beneficial for tasks that demand repeatable accuracy and minimal rework. Material composition and cutting behaviour for demanding tasks Manufactured from HSS‑E with a 5% cobalt alloy, the drill provides increased hardness and thermal resistance compared with standard HSS, improving tool life under higher cutting temperatures. The fully ground flute geometry yields sharp cutting edges and excellent runout accuracy, while the 135° tip angle optimises entry into harder materials by reducing initial cutting forces. For workshop users, this means more reliable performance when drilling alloyed and unalloyed steel, cast iron and many non‑ferrous metals. Intended uses and practical advice for best results This Type N Twist Drill is designed primarily as a metal drill for professional metalworking applications. It is well suited for use in Drilling Machines for through‑holes and precision fits. For optimal results, a stable clamping setup and appropriate cutting fluid are recommended, especially when working with stainless steels or when long continuous cuts are needed. As the fully ground variant can be more brittle than rolled versions, controlled feed and adequate cooling extend service life and reduce breakage risk. Who benefits from this tool Workshops, toolrooms and metal fabricators who require repeatable, precise holes will value the balance of durability and accuracy this short HSS‑E Twist Drill offers. The combination of Type N spiral geometry and cobalt enrichment addresses the needs of professionals drilling harder materials while maintaining the option to work with various non‑ferrous metals and plastics as required. Strongly recommended: Choose the MetavCUT Type N Twist Drill for demanding metal drilling tasks and contact METAV Werkzeuge for expert application support — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47070-FDA Diameter: 7 mm Total Length: 109 mm Spiral Length: 69 mm Tip Angle: 135° Type: Type N Execution: short Shaft Execution: fully ground Material: HSS‑E Colour: 5% cobalt-alloyed For: Drilling Machine Model Series: Standard Line Norm: DIN 338 Applications: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Type N Twist Drill is primarily applied to the machining of high‑strength and standard steels and larger drill diameters; its short form is ideal for precision work in metal, offering easier grinding and greater resistance to mechanical stress. Can the MetavCUT Type N Twist Drill be used in a drilling machine? Yes, the MetavCUT Type N Twist Drill is intended for use in Drilling Machines and performs best when clamped in stable chucks or fixtures under controlled feed and with cutting fluid where applicable. Why are twist drills point‑sharpened? Point‑sharpening reduces the cross‑cutting edge at the tip of the Twist Drill, lowering frictional forces and therefore requiring less feed force; the sharper tip also improves centring accuracy in the workpiece. Can a metal twist drill be used to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but guidance and surface finish are typically inferior to dedicated wood drills; metal drills are easier to re‑grind and have lower self‑feeding tendencies. At which drill depths is the Twist Drill most commonly used? For solid drilling, the Twist Drill is the most frequently used tool; it is particularly common for diameters up to 20 mm and drilling depths up to 100 mm, depending on machine setup and material. Which is better, HSS or HSSE? The common assumption that HSSE steels are always superior to HSS is not universally true; selection should be based on actual working conditions, as HSSE may only justify higher cost under specific stress and temperature regimes.

Twist Drill — Extra-long HSS‑G 7 mm, 135° point, bright‑finished, fully‑ground shank, DIN 1869 (MetavCUT) The Twist Drill is an extra‑long HSS‑G drill designed for deep metal drilling with a Drilling Machine, offering precise performance for demanding workshop and industrial applications. Extra‑long design for deep bores HSS‑G material for high cutting performance 135° point angle for harder materials Fully ground shank for high concentricity DIN 1869 specification for deep‑hole drilling Durable HSS construction for reliable metal cutting The HSS‑G material and CNC ground flute geometry deliver a robust combination of hardness and sharpness that makes the Twist Drill ideal for metalworking. Ground manufacturing creates very sharp cutting edges and excellent Runout Accuracy, so holes are cleaner and reaming effort is reduced. Because ground drills can be comparatively brittle, the drill performs best under machine conditions and with appropriate Coolant to extend tool life. Designed for deep, precise boreholes in tough materials With an overall length of 225 mm and a spiral length of 155 mm, this extra‑long twist drill reaches deep workpieces where standard lengths cannot. The 7 mm diameter combined with a 135° point angle improves entry in harder steels and stainless materials, reducing the risk of wandering at the start of the bore. Conformity to DIN 1869 ensures suitability for deep‑hole conditions and industrial standards, enabling consistent results in production environments. Best used in machine setups for professional results This twist drill is optimised for use with a Drilling Machine rather than handheld use, thanks to its fully‑ground shank and precision geometry. Professionals in fabrication, maintenance and toolrooms will benefit from faster penetration and lower feed forces—features that support efficient workshop workflows. For stationary drilling rigs or press machines, the drill’s geometry allows better centring and repeatable hole quality. Faster drilling and lower operator effort Testing and manufacturer guidance show that the ground HSS design can enable up to 40% faster drilling and require about 50% less thrust than conventional rolled HSS tools in comparable conditions. That translates into reduced machine load and less operator fatigue during repetitive work. Keep in mind that the extra‑long geometry is specifically targeted at deep or hard‑to‑reach bores and performs best with steady clamping and adequate lubrication. We recommend the MetavCUT extra‑long Twist Drill for professionals needing precise deep metal bores; for personalised technical advice and application support contact METAV Werkzeuge via email, phone or WhatsApp — expert consultation is available to ensure the right tool choice and safe handling 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 32070-FDA Diameter: 7 mm Point Angle: 135° Execution / Type: Extra long Colour: Bright finished Overall Length: 225 mm Spiral Length: 155 mm Shank Execution: Fully ground Material: HSS‑G Standard / Norm: DIN 1869 Application: Drills for metal, for Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily used for machining high‑strength metals and larger drill diameters; its extra‑long design and ground geometry make it suitable for deep bore operations and difficult‑to‑access drilling tasks in professional metalworking. Which three drill types are commonly distinguished? The three main drill types are Metal drills, Wood drills, and Masonry/Concrete drills, where the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking applications.

Twist Drill — Extra Long Drill Bit (7 mm, 135°) HSS‑G, Bright Finished, DIN 1869 — MetavCUT A Twist Drill extra long HSS‑G drill bit for Drilling Machines, designed for deep metal drilling and precise holemaking. 7 mm diameter for precision metalwork Extra long design for deep bore applications Fully ground shank for high concentricity HSS‑G material for hard metals and longevity 135° tip angle reduces walking in tough materials Faster deep drilling thanks to extra long design The extra long overall length delivers the reach required for deep drilling tasks without the need to reposition workpieces, making the bit ideal for access-restricted setups. Made from HSS‑G, this Twist Drill combines hardness with a ground geometry that produces clean, precise holes in steel and cast materials; the CNC grinding process yields sharp cutting edges and high runout accuracy, which shortens machining time and improves repeatability. Reliable penetration in hard materials with 135° tip A 135° tip angle provides a more gradual cutting action suited to harder alloys and stainless steels, lowering the risk of chipping at the entry and improving centering when starting a hole. This geometry reduces the need for pilot operations in many cases and helps maintain edge life under elevated contact stresses, so fewer tool changes are necessary during a job. Clean chips and better cooling for extended tool life The deep spiral flute (spiral length 200 mm) evacuates swarf efficiently from deep bores, while the bright finished surface supports smoother chip flow and easier cleaning. When used with appropriate coolant and a stable setup on a Drilling Machine, the combination of flute geometry and fully ground shank minimizes heat build-up and supports longer service intervals for the cutting edge. Precise guidance and handling in production environments The fully ground shank (fully ground) ensures excellent concentricity and stable clamping, reducing vibration and improving surface quality of the bore. Consciously engineered to DIN 1869 tolerances, this Twist Drill is suited for workshop and production use where consistent hole quality and interchangeability are required. Who benefits from this drill and how to use it Designed primarily for machining professionals and maintenance technicians working with legierter and unlegierter steels, cast iron and non‑ferrous metals, this bit excels where deep, accurate holes are required. For best results, secure the workpiece, use a stable Drill Machine setting, apply suitable coolant, and avoid excessive feed to prevent brittle fracture typical of ground HSS tools. METAV CUT recommends this Twist Drill for demanding deep metal drilling tasks; for personalised technical advice or to verify suitability for a specific application, METAV Werkzeuge offers expert consultation — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 33070-FDA Diameter: 7 mm Overall length: 290 mm Spiral length: 200 mm Tip angle: 135° Material: HSS‑G Standard: DIN 1869 Finish: Bright finished Shank execution: Fully ground Execution: Extra long For: Drilling Machine Model series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT best used for? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger drill diameters; its extra long configuration and HSS‑G grade make it well suited for deep holes in legierte and unlegierter steel, cast iron and hard plastics, providing clean, precise bores under demanding conditions. Can the MetavCUT Twist Drill be used with a regular drilling machine? Yes, this MetavCUT Twist Drill is designed for use in a Drilling Machine; for optimal performance secure the bit in a precise chuck, apply appropriate coolant and moderate feed rates to exploit the ground geometry and avoid undue stress on the cutting edge. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their shape makes them easy to sharpen and capable of withstanding significant loads. Which three drill types exist? There are three common categories: metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑cut at the tip, lowering friction and thus the required feed forces; it also improves centring at the start of the hole, giving better guidance and less wander. Can metal Twist Drills be used to drill wood? Metal Twist Drills can be used in wood, but they generally offer less guidance and a less clean finish than dedicated wood drills; however, they are easier to resharpen and exhibit less self‑feeding tendency. At what drilling depths are Twist Drills most commonly used? Twist Drills are the go‑to tool for through drilling in solid materials; they are most frequently used for diameters up to about 20 mm and depths up to around 100 mm. Is HSS or HSSE better? The common assumption that HSSE is categorically superior to HSS is not universally true; when choosing, assess whether your working conditions justify the higher cost of HSSE for improved wear resistance in specific applications.

Spiralbohrer für Metall, 7 mm, 135°, HSS-G, extra lang, blank, DIN 1869 Der Spiralbohrer in 7 mm ist ein extra langer HSS-G-Bohrer für tiefe Metallbohrungen mit geschliffener Schaftausführung und optimiertem Spitzenwinkel für harte Werkstoffe. Extra lange Ausführung für tiefe Bohrungen Geschliffen für hohe Rundlaufgenauigkeit DIN 1869 mit Tieflochspirale für Metall HSS-G Material für legierten und unlegierten Stahl 135° Spitzenwinkel ideal für härtere Werkstoffe Schnelle, kraftsparende Bohrleistung bei Metallen Dank der geschliffenen Geometrie erzielt der Bohrer deutlich schärfere Schneidkanten und eine konstante Bohrleistung. Die HSS-G-Legierung ermöglicht ein bis zu 40 % schnelleres Eindringen bei gleichzeitig etwa 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Ausführungen. Bei Einsatz in Baustahl, Guss oder Hartkunststoff sorgt die 135°-Spitze für reduziertes Auslaufen und saubere Bohrlöcher, was die Nachbearbeitung minimiert und die Fertigungszeit senkt. Extra Länge und sichere Spanabfuhr für tiefe Bohrungen Mit einer Gesamtlänge von 370 mm und einer Spirallänge von 250 mm ist diese Ausführung speziell für tiefe Bohrungen konzipiert. Die Tieflochspirale nach DIN 1869 gewährleistet verbesserte Spanabfuhr auch unter erschwerten Bedingungen, wodurch Verblockungen reduziert werden. Für den Einsatz mit Handbohrmaschine ist die Ausführung geeignet; für besonders lange oder hochbelastete Bohrungen empfiehlt sich der stationäre Betrieb und die Nutzung von Kühlschmierstoff, um die Standzeit zu maximieren. Für Werkstattprofis und Instandhaltung konzipiert Diese Ausführung spricht Anwender in der Metallbearbeitung, Maschineninstandhaltung und im professionellen Handwerk an, die tiefe, präzise Bohrungen benötigen. Der Bohrer ist besonders geeignet für legierten und unlegierten Stahl bis 1000 N/mm², Gussstahl und Nichteisenmetalle. Die Kombination aus geschliffenem Schaft und HSS-G-Material stellt eine wirtschaftliche Lösung dar, wenn Präzision und Bohrgeschwindigkeit im Vordergrund stehen. Anwendungstipps für präzise Ergebnisse und lange Lebensdauer Vor dem Bohren empfiehlt sich Anpunkten, um das Abwandern des Bohrers zu vermeiden, und die Verwendung moderater Schnittgeschwindigkeiten bei härteren Werkstoffen. Bei längeren Einsätzen sorgt kontinuierliche Kühlung für geringere thermische Belastung; aufgrund der geschliffenen Ausführung ist erhöhte Vorsicht bei Stößen geboten, da die Sprödigkeit die Bruchgefahr erhöht. Ersatzweise kann bei sehr harten Serienmaterialien auf Vollhartmetalllösungen ausgewichen werden. Empfehlung: Für tiefe Metallbohrungen die extra lange, geschliffene HSS-G-Ausführung von MetavCUT wählen — bei Unsicherheiten oder Bedarf an ergänzenden technischen Daten berät METAV Werkzeuge gerne per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 34070-FDA Durchmesser: 7 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: extra lang Farbe: blank Schaftausführung: geschliffen Norm: DIN 1869 Spirallänge: 250 mm Gesamtlänge: 370 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der MetavCUT Spiralbohrer für Metall mit 135° Spitzenwinkel ist für härtere Werkstoffe wie Edelstahl geeignet; bei Edelstahl empfiehlt sich reduzierte Schnittgeschwindigkeit und Kühlung, um bestmögliche Standzeiten zu erreichen. Kann ich den Spiralbohrer von MetavCUT mit einer Handbohrmaschine verwenden? Ja, der Spiralbohrer von MetavCUT in 7 mm ist für den Einsatz mit Handbohrmaschine geeignet; für besonders tiefe oder anspruchsvolle Bohrungen wird jedoch stationäre Aufnahme und Kühlung empfohlen, um Bruchrisiken zu minimieren. Warum ist der geschliffene Schaft beim MetavCUT Spiralbohrer vorteilhaft? Die geschliffene Schaftausführung beim MetavCUT Spiralbohrer sorgt für höhere Rundlaufgenauigkeit und schärfere Schneidkanten, was präzisere Bohrlöcher und sauberere Oberflächen ermöglicht; dabei erhöht sich jedoch die Vorsicht bei Stoßeinwirkungen. Für welche Materialien ist der MetavCUT Spiralbohrer primär ausgelegt? Der MetavCUT Spiralbohrer eignet sich primär für legierten und unlegierten Stahl bis 1000 N/mm², Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe; bei sehr zähen Materialien sollte auf spezialisierte Kühlung oder andere Werkstofflösungen geachtet werden. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#34070-FDA","sku":"34070-FDA","mpn":"34070-FDA","name":"Spiralbohrer 7 mm 135° HSS-G extra lang blank","description":"Extra langer Spiralbohrer 7 mm, HSS-G, 135° Spitzenwinkel, geschliffener Schaft, Tieflochspirale nach DIN 1869, geeignet für legierten und unlegierten Stahl bis 1000 N/mm², Gussstahl, Nichteisenmetalle und Hartkunststoffe; konzipiert für tiefe Metallbohrungen und reproduzierbare Spanabfuhr.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"7 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Spirallänge","value":"250 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"370 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7 mm von MetavCUT mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe wie Edelstahl; bei Edelstahl werden reduzierte Schnittgeschwindigkeit und Kühlung empfohlen, um die Standzeit zu verbessern."}},{"@type":"Question","name":"Kann ich den Spiralbohrer von MetavCUT mit einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7 mm von MetavCUT ist für den Einsatz mit einer Handbohrmaschine geeignet; für sehr tiefe oder anspruchsvolle Bohrungen empfiehlt sich jedoch eine stationäre Aufnahme und Kühlung."}},{"@type":"Question","name":"Warum ist der geschliffene Schaft beim MetavCUT Spiralbohrer vorteilhaft?","acceptedAnswer":{"@type":"Answer","text":"Die geschliffene Schaftausführung des MetavCUT Spiralbohrers sorgt für hohe Rundlaufgenauigkeit und schärfere Schneidkanten, was präzisere Bohrlöcher und sauberere Oberflächen ermöglicht; zugleich erfordert die geschliffene Ausführung erhöhte Vorsicht bei Stößen."}},{"@type":"Question","name":"Für welche Materialien ist der MetavCUT Spiralbohrer primär ausgelegt?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 7 mm ist primär ausgelegt für legierten und unlegierten Stahl bis 1000 N/mm², Gussstahl, Gusseisen, Nichteisenmetalle und Hartkunststoffe; bei sehr zähen Materialien sollte spezialisierte Kühlung oder alternative Werkstofflösungen in Betracht gezogen werden."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-34070-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer für tiefe Metallbohrungen"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"DIN 1869 Tieflochspirale"},{"@type":"Thing","name":"Extra lange Ausführung"}],"mentions":[{"@type":"Thing","name":"MetavCUT"},{"@type":"Thing","name":"Tieflochspirale DIN 1869"},{"@type":"Thing","name":"Geschliffener Schaft"},{"@type":"Thing","name":"135° Spitzenwinkel"}]}]}

Twist Drill — left-cutting HSS‑G metal drill, Ø 7 mm, 135° (DIN 338) by MetavCUT The Twist Drill is a left‑cutting metal drill bit for Drilling Machine use, designed for fast, precise removal of broken or seized screws and reliable machining of alloyed and unalloyed steels. Left‑cutting geometry for screw extraction and reverse drilling HSS‑G material for high wear resistance 135° point angle for harder materials like stainless steel Conforms to DIN 338 for short cylindrical shank bits Optimised cutting: up to 40% faster drilling with less thrust Faster results when extracting screws and working in reverse The left‑cutting geometry of this bit gives a decisive advantage when encountering broken or jammed screws: the cutting lips are ground so the drill cuts correctly in left rotation, which often helps to unscrew and remove the damaged fastener while drilling. This construction also reduces the tendency to pull the bit into the workpiece and, in many cases, allows for a more controlled extraction process. The left‑cutting feature therefore converts a common workshop problem into a predictable, solvable task. Durable performance through HSS‑G and Profi Line engineering Manufactured from HSS‑G, this Twist Drill offers elevated hardness and heat resistance compared with standard HSS grades, resulting in longer tool life under high loads. The Profi Line design emphasises dimensional accuracy and consistent edge geometry, so wear patterns remain predictable and regrinding is straightforward. For users who need repeatable performance in tougher materials, the combination of HSS‑G and professional series quality translates into fewer tool changes and less downtime. Optimised point angle for hard materials and reduced walking A 135° point angle is specified for improved centring and longer edge life when machining harder materials such as stainless steel and cast components. The flatter point reduces penetration shock and helps avoid chatter at the start of a hole. In practical terms, this means cleaner entry holes and better control when drilling alloys and tempered steels, especially in combination with an appropriate coolant and steady feed. Standardised dimensions for reliable machine compatibility This Twist Drill is produced to DIN 338, the classification for short twist drills with cylindrical shank, which ensures compatibility with a wide range of bench and portable drilling machines. The Ø 7 mm diameter and standard shank dimensions permit quick clamping and stable rotation in chucks and collets. Choosing a DIN‑compliant bit reduces the risk of misfits and simplifies tool inventory management for workshops and industrial operations. Practical benefits for workshop and maintenance applications Beyond material and geometry, this bit is tailored for real workshop needs: reduced thrust force during cutting can make hand‑held drilling less strenuous and improve operator control, while the left‑cutting option expands the bit’s usefulness for maintenance tasks such as extracting corroded or stripped screws. The resulting time savings and increased first‑pass success rate benefit both craftspersons and production teams with frequent metalworking demands. Simple explanation of key terms for everyday use If the terminology is unfamiliar, here is a brief guide: left‑cutting means the flutes and cutting edges are ground to cut effectively when the spindle turns counterclockwise; HSS‑G is a high‑speed steel grade with enhanced properties for heavy cutting; a 135° point angle produces a flatter tip suited to hard materials; and DIN 338 specifies short, cylindrical‑shank twist drills commonly used in metalworking. These characteristics combine to make the bit a specialist solution rather than a general‑purpose wood or masonry tool. Choose the MetavCUT Profi Line Twist Drill with 7 mm diameter and 135° point angle for demanding metalwork — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 60070-FDA Durchmesser: 7 mm Spitzenwinkel: 135° Ausführung: left cutting (linksschneidend) Typ: Twist Drill for Drilling Machine Material: HSS‑G Norm: DIN 338 Modellserie: Profi Line Anwendung: Drills for metal (Bohrer für Metall) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT best used for The MetavCUT Twist Drill is primarily intended for metalworking, with a particular strength in extracting broken or seized screws thanks to its left‑cutting geometry; it is also suitable for drilling alloyed and unalloyed steels when used in a Drilling Machine. Does the MetavCUT Profi Line Twist Drill require a special machine? The MetavCUT Profi Line Twist Drill needs a drilling machine capable of running in reverse (left rotation) to exploit the left‑cutting grind; for conventional forward drilling the same DIN 338 bit shape is compatible with standard chucks, but screw‑extraction performance requires left rotation. For what is a Twist Drill used A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; the shape is easy to regrind and withstands higher loads, which makes it suitable for demanding metalwork and repair tasks. Which three drill types exist There are three principal drill types: Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills pointed Pointing a Twist Drill reduces the cross‑cut at the tip; this lowers friction and therefore reduces required thrust force while improving centring of the drill tip in the workpiece. Can a Twist Drill be used for wood A Metal drill can be used in wood, but guidance and finish will be inferior compared with a purpose‑made wood drill; metal drills are easier to regrind and usually have less self‑feeding action. For which drilling depths is the Twist Drill most used A through hole in solid material is commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most frequently used tool. Is HSS or HSSE better The common belief that HSSE steels are always superior to HSS is incorrect; you should evaluate whether the working conditions justify the higher cost of HSSE before deciding.

Twist Drill Type N — MetavCUT short HSS‑G 7 mm, 135° tip, bright finished, DIN 338 The Twist Drill Type N short from MetavCUT is a precision HSS‑G 7 mm drill bit with a 135° tip angle, bright finished and fully ground shaft, engineered for metalworking on Drilling Machines. HSS‑G ground for up to 40% faster drilling 135° tip for hard and stainless steels Short design for higher stability and precision Fully ground shaft for improved concentricity Conforms to DIN 338 for short twist drills Faster machining with less effort thanks to HSS‑G technology Designed primarily for professional metalworking, this HSS‑G short Twist Drill delivers greater drilling performance and reduced operator effort. The ground finish of the cutting edges enables up to 40% faster penetration and requires significantly lower feed force compared with conventional HSS bits. Because the bit is short, it exhibits higher rigidity and reduced deflection, which directly improves hole accuracy when working in alloys, cast steels or temper cast materials. For users who prioritise efficiency on a Drilling Machine, this design translates into measurable time savings and more consistent results. Stable holes and reliable centring for demanding materials The 135° tip angle is chosen to perform reliably in harder materials such as stainless steel, where a blunter tip reduces wandering and shortens dwell time at the start of the hole. The Type N normal spiral geometry provides a universal flute form suited to metal drilling while the fully ground shaft improves concentricity and chuck clamping. Conforming to DIN 338 ensures consistent dimensions and manufacturing quality across the Basic Line series, so users benefit from reproducible drilling performance and predictable tool behaviour under higher loads. Optimised for metalworking applications and precise tasks Engineered for tasks where precision matters, this short Twist Drill is especially suited to drilling in unalloyed and alloyed steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. The combination of Type N spiral geometry and the bright finished surface supports chip evacuation and prolongs tool life when paired with appropriate cutting fluid. Contractors, workshops and maintenance professionals will value the bit for producing clean, accurate holes in component manufacture, repair work and installation tasks. Practical handling, compatibility and supplier support The reduced overall length and the short spirallength improve handling and reduce the tendency to chatter in handheld and bench Drilling Machines. The fully ground shaft simplifies clamping and increases runout accuracy, which benefits threaded hole preparation and reaming follow‑up. If there is uncertainty whether this Twist Drill Type N suits a specific machine or material, METAV Werkzeuge provides extensive and competent advice to help select the right tool or to supply additional technical data. Choose the MetavCUT Twist Drill Type N for reliable metal drilling performance, and contact METAV Werkzeuge for expert advice by email info@metav-werkzeuge.com or by phone +49 2822 7131930 — WhatsApp available at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27070-FDA Type: Type N Diameter: 7 mm Tip angle: 135° Material: HSS‑G Standard: DIN 338 Execution: short Colour: bright finished Shaft finish: fully ground Spiral length: 69 mm Overall length: 109 mm Application: Drills for metal / Drilling Machine compatibility Model series: Basic Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters; its geometry and HSS‑G composition make it suitable for alloyed and unalloyed steel, cast steel and similar tough materials, and its form is relatively easy to re‑grind while withstanding greater loads. Which 3 drill types are there? Commonly distinguished drill types are: Metal drill bits, Wood drill bits and Stone/Concrete drill bits, with the MetavCUT Twist Drill Type N belonging to the metal drill category.

Twist Drill (Type N) — 7 mm, 135° Point Angle, Short, Bright finished, HSS-G, DIN 338 A Twist Drill (Type N) designed for precise metal drilling in Drilling Machines, offering a short, stable geometry for work on hard materials. Short design for improved stability HSS-G material for high cutting performance 135° point angle for hard materials Fully ground shank for excellent runout accuracy Durable HSS-G construction for faster, cleaner holes The HSS-G material of this Twist Drill ensures high wear resistance and reliable cutting behaviour when machining Steel and other Alloys. Because the flute geometry is produced by CNC grinding, the tool achieves very sharp cutting edges and a high concentricity, which translates into cleaner holes and longer tool life under correct cutting conditions. Users will benefit from up to 40% faster drilling and about 50% less feed force compared with conventional HSS designs, provided adequate coolant and appropriate speeds are used. Short overall length increases precision and reduces vibration A shorter design reduces the exposed overhang and therefore minimizes bending and chatter during operation. This results in higher positional accuracy and makes the drill particularly suitable for precise work in hardened materials such as Stainless Steel. The designation to DIN 338 confirms the geometry and format as a short Twist Drill with a Cylindrical Shank, ensuring compatibility with common chucks and fixtures in metalworking shops. Geometry optimised for metalworking and hard materials The 135° point angle is tailored to reduce initial drilling forces and improve centring in tough materials, shortening pilot time and improving surface finish in the hole. As a Type N (normal spiral) drill, this tool is engineered primarily for Metal applications including Cast Iron, Sintered Iron, Tempered Castings, Non-Ferrous Metals and Hard Plastics. For best results, use on stationary or machine-mounted Drilling Machines and apply appropriate cooling to avoid tempering the cutting edge. Target users and handling recommendations Workshop professionals, toolroom technicians and demanding hobbyists will appreciate the combination of a short flute length and a fully ground shank that delivers consistent runout and repeatable hole quality. To avoid brittleness-related breakage, operate the Twist Drill with steady feed, adequate coolant and secure clamping. Ground drills can be re-sharpened more easily than rolled equivalents, maintaining edge quality and service life when reconditioned correctly. We recommend the MetavCUT Twist Drill for precise metalworking applications; for technical advice or to confirm suitability for a specific material or machine, METAV Werkzeuge provides expert consultation – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45070-FDA Diameter: 7 mm Point Angle: 135° Type: Type N Execution: Short Finish: Bright finished Shank Execution: Fully ground Material: HSS-G Norm: DIN 338 Spiral Length: 69 mm Total Length: 109 mm For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill is primarily used for machining high-strength materials and larger hole diameters. Its ground geometry is easy to re-sharpen and withstands higher loads, making it suitable for demanding metalworking tasks where durability and precision are required. Which three drill types exist? For context, the MetavCUT Twist Drill belongs to the metal-drill category. The three main drill types are Metal drills, Wood drills and Stone/Concrete drills.

Spiralbohrer 7 mm, HSS-G, kurz, Typ N, 135°, geschliffen, DIN 338, blank – MetavCUT Profi Line Der Spiralbohrer 7 mm kurz von MetavCUT ist ein präziser Metallbohrer für stationäre und handgeführte Anwendungen, optimiert für legierte und unlegierte Stähle sowie Gusswerkstoffe. Geschliffener HSS-G für präzise Metallbohrungen Spitzenwinkel 135° für harte Werkstoffe Kurze Ausführung für hohe Stabilität DIN 338 konform mit Zylinderschaft Spirallänge 69 mm, Gesamtlänge 109 mm Schnellere und kraftsparende Bearbeitung durch geschliffene HSS-Technologie Der HSS-G Kurzbohrer wurde so gestaltet, dass er beim Bohren in Metall effizienter arbeitet: dank optimierter Spanfläche ermöglicht er ein 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Ausführungen. Die geschliffene Geometrie sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stahlgüten sowie in Gusseisen und Hartkunststoffen gewährleistet. Dadurch reduziert sich die Bearbeitungszeit ohne Einbußen bei der Qualität. Stabilität und Präzision durch kurze Auskraglänge Die kurze Ausführung erhöht die Steifigkeit des Werkzeugs und minimiert Vibrationen, was besonders bei handgeführten Bohrmaschinen und beim Anbohren wichtig ist. Im Standard-Bereich für Durchmesser von 2 mm bis 13 mm bietet dieser Bohrer die ideale Kombination aus Handhabung und Leistungsfähigkeit. Anwender profitieren von geringerem Verbiegen, besserem Zentrierverhalten und höherer Bohrgenauigkeit, sodass sich der Bohrer für Montage, Werkstattarbeiten und anspruchsvolle Reparaturarbeiten eignet. Materialanpassung, Spitzenwinkel und Einsatzempfehlungen Der gewählte Spitzenwinkel 135° verbessert das Anbohrverhalten in harten Werkstoffen und verringert das Wandern beim Einstich. Als Typ N mit Normalspirale ist der Bohrer klassisch für Metall ausgelegt; die Spirallänge 69 mm und Gesamtlänge 109 mm sind auf den stationären und mobilen Einsatz abgestimmt. Für höchste Präzision empfiehlt sich vor dem Bohren ein Anpunkten mit einem Zentrierbohrer, sowie die Nutzung geeigneter Kühlung bei längeren Bohrzyklen, um Werkzeugverschleiß zu minimieren. Robustheit und Fertigungsqualität erklären Die geschliffene Schaft-Ausführung und die Fertigungsnorm DIN 338 stehen für reproduzierbare Qualität und Maßhaltigkeit. Geschliffene Bohrer zeigen schärfere Schneiden und bessere Rundläufe als walzgeformte Varianten, sind jedoch empfindlicher gegenüber Stoßbeanspruchung; daher empfiehlt sich der Einsatz in stationären Spannmitteln oder mit sicherer Spannaufnahme in Akkubohrmaschinen. So bleibt die Standzeit hoch und Produktionsfehler werden reduziert. MetavCUT empfiehlt die Profi Line Kurz-Ausführung für präzise Metallbohrungen; bei Fragen zur Wahl des passenden Bohrers oder zur Anwendung steht METAV Werkzeuge mit fachkundiger Beratung per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 zur Verfügung Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 48070-FDA Durchmesser: 7 mm Material: HSS-G Ausführung: kurz Typ: Typ N (Normalspirale) Spitzenwinkel: 135° Schaft-Ausführung: geschliffen Norm: DIN 338 Spirallänge: 69 mm Gesamtlänge: 109 mm Farbe: blank Für Bohrmaschine: Handbohrmaschine, stationäre Maschinen geeignet Modellserie: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien ist der Spiralbohrer 7 mm von MetavCUT geeignet? Der Spiralbohrer 7 mm aus der MetavCUT Profi Line ist besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen sowie Nichteisenmetalle und Hartkunststoffe ausgelegt und bietet dort saubere Bohrbilder. Kann der Spiralbohrer 7 mm kurz in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer 7 mm ist im Standard-Bereich einsetzbar und eignet sich für Handbohrmaschinen; die kurze Ausführung erhöht die Stabilität, dennoch empfiehlt sich sicheres Spannen und bei härteren Werkstoffen Kühlung. Worin unterscheidet sich der geschliffene HSS-G Spiralbohrer von walzgeformten Typen? Der geschliffene HSS-G Spiralbohrer liefert aufgrund des CNC-Schliffs schärfere Kanten und höhere Rundlaufgenauigkeit, was präzisere Bohrlöcher ermöglicht; als Nachteil ist die erhöhte Sprödigkeit zu beachten, weshalb schonende Handhabung und Kühlung empfohlen werden. Wie vermeide ich ein Wandern des Bohrers beim Anbohren mit dem MetavCUT Spiralbohrer? Nutzen Sie ein Zentrierstift oder einen Zentrierbohrer vor dem Durchbohren und sichern Sie das Werkstück; der 135° Spitzenwinkel des MetavCUT Spiralbohrers reduziert das Wandern, ein Anpunkten erhöht jedoch die Präzision weiter. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#48070-FDA","sku":"48070-FDA","mpn":"48070-FDA","name":"Spiralbohrer 48070-FDA","description":"Spiralbohrer 7 mm kurz, HSS-G, geschliffen, Typ N, Spitzenwinkel 135°, DIN 338, blank; Kurzbohrer für präzise Metallbohrungen in legierten und unlegierten Stählen, Gusswerkstoffen und Hartkunststoffen; hohe Stabilität durch kurze Auskraglänge; geeignet für Handbohrmaschine und stationäre Maschinen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"7 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Schaft-Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Spirallänge","value":"69 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"109 mm"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine, stationäre Maschinen geeignet"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"UID","value":"48070-FDA"},{"@type":"PropertyValue","name":"Preis Netto","value":"3.91 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien ist der Spiralbohrer 7 mm von MetavCUT geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7 mm von MetavCUT (Profi Line) eignet sich besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe und liefert dort saubere, präzise Bohrbilder."}},{"@type":"Question","name":"Kann der Spiralbohrer 7 mm kurz in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer 7 mm kurz von MetavCUT kann in Handbohrmaschinen eingesetzt werden; die kurze Ausführung erhöht die Stabilität, dennoch ist sicheres Spannen und bei härteren Werkstoffen Kühlung zu empfehlen."}},{"@type":"Question","name":"Worin unterscheidet sich der geschliffene HSS-G Spiralbohrer von walzgeformten Typen?","acceptedAnswer":{"@type":"Answer","text":"Der geschliffene HSS-G Spiralbohrer von MetavCUT besitzt durch CNC-Schliff schärfere Schneiden und höhere Rundlaufgenauigkeit als walzgeformte Typen, was präzisere Bohrlöcher ermöglicht; als Nachteil ist die erhöhte Sprödigkeit zu beachten, daher empfiehlt sich schonende Handhabung und Kühlung."}},{"@type":"Question","name":"Wie vermeide ich ein Wandern des Bohrers beim Anbohren mit dem MetavCUT Spiralbohrer?","acceptedAnswer":{"@type":"Answer","text":"Um Wandern zu vermeiden, empfiehlt sich ein Anpunkten mit einem Zentrierbohrer oder Zentrierstift und sichere Spannaufnahme; der 135° Spitzenwinkel des MetavCUT Spiralbohrers reduziert das Wandern zusätzlich."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/product/48070-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Kurz-Ausführung"},{"@type":"Thing","name":"HSS-G Geschliffen"},{"@type":"Thing","name":"DIN 338 Zylinderschaft"}],"mentions":[{"@type":"Thing","name":"Kurzbohrer für präzise Metallbohrungen"},{"@type":"Thing","name":"Geeignet für Handbohrmaschine und stationäre Maschinen"},{"@type":"Thing","name":"Empfohlenes Vorgehen: Anpunkten und Kühlung"}]}]}

MetavCUT Twist Drill (Short, 7 mm, 118°, TiN-coated, HSS-G, DIN 338, Fully ground shank) The MetavCUT Twist Drill is a short Twist Drill engineered for precision metal drilling, offering a 7 mm diameter, a 118° tip angle and a TiN coating for longer tool life. Short design for increased stability 7 mm Diameter for precise holes 118° Tip Angle for easier penetration TiN-coated HSS for extended tool life Fully ground shank for fast drilling High performance and measurable efficiency for metalworking The MetavCUT Twist Drill combines a short design with HSS-G material and a TiN-coated surface to reduce friction and extend service life. The ground geometry delivers up to 40% faster drilling and requires 50% less feed force compared with conventional HSS drills, which directly reduces operator effort and cycle times. The TiN coating further lowers wear when used with an appropriate cooling system, making the tool particularly suitable for alloyed and unalloyed steel, Tempered Cast Iron and other non-ferrous metals. Precision, stability and guidance in every hole A reduced overall length and a shortened overhang increase stability and reduce deflection, so holes come out more accurate on both stationary and portable machines. The fully ground shank and ground flutes ensure excellent centring and a clean chip evacuation pattern, translating to improved surface finish and repeatable hole quality. The 118° tip angle supports reliable penetration on slightly softer metals and reduces walking on curved surfaces. Clear application range and machining recommendations This short Twist Drill is optimised for drilling into metals such as steel, Cast Iron, Sintered Iron, Copper, Bronze and Hard Plastics. Use with a suitable Drilling Machine or a stable hand drill at the correct speed for the material; cooling is recommended for tougher alloys to maximise lifetime. The drill conforms to DIN 338, which specifies short cylindrical-shank high-speed steel drills; the ground manufacturing process (HSS-G) provides sharp cutting edges and high run-out accuracy, best exploited under rigid clamping and controlled feeds. Who benefits and why this design matters Workshop professionals and production technicians will appreciate the tool’s combination of precision and durability. The short geometry suits tasks requiring minimal vibration and exact hole placement, for example in jig work or when working close to edges. Because the cutter is easier to regrind than some other types, maintenance and refurbishment are straightforward, making this an economical choice for repetitive machining of medium-hard materials. We recommend the MetavCUT short TiN-coated Twist Drill for demanding metalworking tasks; METAV Werkzeuge offers expert technical advice and support if you are unsure whether this tool meets your requirements — contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 28070-FDA Diameter: 7 mm Overall length: 109 mm Spiral length: 69 mm Tip angle: 118° Type / Execution: Short Material: HSS-G Surface / Coating: TiN-coated Shank finish: Fully ground Suitable for: Drilling Machine / Hand drill Application: Drills for metal Standard: DIN 338 Model series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A Twist Drill such as the MetavCUT Twist Drill is primarily used for machining high-strength materials and larger bore diameters; its design can be ground easily and withstands significant loads, making it suitable for steels and other hard materials. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills, each optimised for material-specific cutting geometry and chip removal behavior.

Spiralbohrer 7 mm – HSS-G geschliffen, TIN-beschichtet, kurz, Typ N, 135°, DIN 338, MetavCUT Der Spiralbohrer ist ein kurzer HSS-G Metallbohrer für präzise Bohrungen in Stahl, Guss und Nichteisenmetallen mit hoher Stabilität und verbesserter Standzeit. Kurzausführung für höhere Stabilität HSS-G geschliffen nach DIN 338 TIN-beschichtet für längere Lebensdauer 135° Spitzenwinkel für harte Werkstoffe Schnelleres Bohren bei geringerer Anpresskraft Mehr Präzision und weniger Vibrationen beim Metallbohren Die kurze Ausführung reduziert die Auskraglänge und führt zu deutlich höherer Stabilität beim Bohren in Metall. Durch die geschliffene Schaftausführung zeigt das Bohrwerkzeug eine höhere Rundlaufgenauigkeit, was saubere und maßhaltige Bohrlöcher zur Folge hat. Anwender profitieren von geringerer Vibration und besserer Führung, insbesondere bei stationären Säulenbohrmaschinen oder handgeführten Akkubohrschraubern, wenn eine gute Spannfutteraufnahme gewährleistet ist. Längere Standzeit dank TIN-Beschichtung und HSS-G Material Die TIN-beschichtung verringert Reibung und Wärmeentwicklung, wodurch der Verschleiß bei Metallbearbeitung reduziert wird. In Kombination mit dem hochwertigen HSS-G Werkstoff ergibt sich eine verlängerte Lebensdauer des Werkzeugs, besonders bei legierten und unlegierten Stählen sowie Gusseisen. Die Oberfläche sorgt zudem für bessere Spanabfuhr und stabileren Schneidprozess, was die Effizienz in der Werkstatt erhöht. Schnelleres Eindringen und geringere Anpresskraft Der 135° Spitzenwinkel ist auf härtere Werkstoffe ausgelegt und verkürzt die Anbohrzeit, ohne die Randzonen zu beschädigen. Durch die optimierte Geometrie ermöglicht das Bohrwerkzeug ein bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten. Das Ergebnis sind höhere Bearbeitungsgeschwindigkeiten und weniger Ermüdung bei wiederkehrenden Arbeitsgängen. Einsatzbereiche, Anwendungshinweise und Vorteile für die Werkstatt Das Bohrwerkzeug eignet sich für die Bearbeitung von legiertem und unlegiertem Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoff. Bei stationärer Nutzung und ausreichender Kühlung empfiehlt sich die Verwendung eines geeigneten Kühlsystems, um die Vorteile der Beschichtung voll auszuschöpfen. Für tiefe oder sehr präzise Passungen sollte vorgebohrt und gegebenenfalls schrittweise auf das Zielmaß aufgebohrt werden, um die Querschneide zu entlasten. Empfehlung: Das MetavCUT Bohrwerkzeug in HSS-G mit TIN-Beschichtung wählen für langlebige und präzise Metallbearbeitung – bei Fragen berät METAV Werkzeuge gern persönlich per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 46070-FDA Durchmesser: 7 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: kurz Schaft Ausführung: geschliffen Spirallänge: 69 mm Gesamtlänge: 109 mm Typ: Typ N Farbe: TIN-beschichtet Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Werkstoffe ist der Spiralbohrer von MetavCUT geeignet? Der MetavCUT Spiralbohrer ist speziell für legierte und unlegierte Stähle, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe konzipiert und liefert dort präzise Ergebnisse. Kann der geschliffene HSS-G Spiralbohrer in Handbohrmaschinen eingesetzt werden? Der geschliffene HSS-G Spiralbohrer kann mit Handgeführten Bohrmaschinen genutzt werden, empfiehlt sich aber besonders bei stationärer Aufnahme für maximale Rundlaufgenauigkeit. Ist Kühlung beim Einsatz des MetavCUT Spiralbohrers notwendig? Bei längeren oder intensiven Bohrvorgängen in harten Werkstoffen wird Kühlung empfohlen, da die TIN-Beschichtung die Wärmeentwicklung reduziert, eine aktive Kühlung jedoch die Standzeit weiter erhöht. Wie wirkt sich der 135° Spitzenwinkel beim Bohrvorgang aus? Der 135° Spitzenwinkel des Spiralbohrers reduziert das Anbohren bei harten Werkstoffen und sorgt für kontrolliertes Eindringen sowie saubere Bohrlochränder. Wodurch unterscheidet sich ein geschliffener Spiralbohrer von einem gewalzten? Ein geschliffener Spiralbohrer wie der MetavCUT Standard Line bietet schärfere Schneidkanten und höhere Rundlaufgenauigkeit, was präzisere Bohrbilder ergibt; er erfordert jedoch sorgfältige Handhabung und eignet sich besonders für stationäre Anwendungen. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#46070-FDA","sku":"46070-FDA","mpn":"46070-FDA","name":"Spiralbohrer 7 mm – HSS-G, kurz, Typ N, TIN-beschichtet","description":"Kurzer HSS-G Spiralbohrer, TIN-beschichtet, 7 mm Durchmesser, 135° Spitzenwinkel, geschliffener Schaft, DIN 338; Entwickelt für präzise Bohrungen in legierten und unlegierten Stählen, Gusseisen, Temperguss, Nichteisenmetallen und Hartkunststoffen. Höhere Stabilität durch Kurzausführung, längere Standzeit dank TiN-Beschichtung und verbesserte Spanabfuhr.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"7 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spirallänge","value":"69 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"109 mm"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Spezialmerkmal","value":"geschliffener HSS-G für hohe Rundlaufgenauigkeit"},{"@type":"PropertyValue","name":"Vorteil Beschichtung","value":"TiN reduziert Reibung und Wärme, erhöht Standzeit"},{"@type":"PropertyValue","name":"Leistungskennzahl","value":"bis zu 40 % schnelleres Bohren, bis zu 50 % geringere Anpresskraft (Herstellerangaben)"}],"offers":{"@type":"Offer","priceCurrency":"EUR","price":"2.82"}},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Werkstoffe ist der Spiralbohrer von MetavCUT geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7 mm von MetavCUT (HSS-G, TIN-beschichtet, kurz, Typ N) eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoff."}},{"@type":"Question","name":"Kann der geschliffene HSS-G Spiralbohrer in Handbohrmaschinen eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Der geschliffene HSS-G Spiralbohrer von MetavCUT kann mit handgeführten Bohrmaschinen verwendet werden, empfiehlt sich jedoch besonders für stationäre Aufnahmen zur Gewährleistung maximaler Rundlaufgenauigkeit."}},{"@type":"Question","name":"Ist Kühlung beim Einsatz des MetavCUT Spiralbohrers notwendig?","acceptedAnswer":{"@type":"Answer","text":"Bei längeren oder intensiven Bohrvorgängen in harten Werkstoffen wird Kühlung empfohlen; die TiN-Beschichtung reduziert die Wärmeentwicklung, aktive Kühlung erhöht jedoch die Standzeit zusätzlich."}},{"@type":"Question","name":"Wie beeinflusst der 135° Spitzenwinkel den Bohrvorgang?","acceptedAnswer":{"@type":"Answer","text":"Der 135° Spitzenwinkel des MetavCUT Spiralbohrers verkürzt das Anbohren in harten Werkstoffen, sorgt für kontrolliertes Eindringen und saubere Bohrlochränder."}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-7mm-hss-g-tin-kurz-typ-n","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer 7 mm"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"TiN-beschichtet"},{"@type":"Thing","name":"DIN 338"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine"},{"@type":"Thing","name":"Stationäre Säulenbohrmaschine"},{"@type":"Thing","name":"Kühlung empfohlen"}]}]}

MetavCUT Spiralbohrer 7 mm, Typ N – kurz, HSS‑G, TIN‑beschichtet, 135° (DIN 338) Der Spiralbohrer 7 mm ist ein kurzer, geschliffener HSS‑G Bohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. Spiralbohrer 7 mm, 135° Spitzenwinkel HSS‑G geschliffen für präzise Metallbohrung TIN‑Beschichtung reduziert Reibung und Verschleiß Kurze Ausführung für höhere Stabilität beim Bohren Geeignet für Handbohrmaschine und stationäre Maschinen Hohe Stabilität bei anspruchsvollen Metallarbeiten Dank der kurzen Ausführung und der geschliffenen Schaftgeometrie bietet dieser Kurzspiralbohrer eine deutlich verringerte Auskraglänge, was die Stabilität während des Bohrens erhöht. Das Resultat sind sauberere Bohrbilder und weniger Vibrationen, besonders bei harten Werkstoffen. Anwender profitieren von geringerer Werkzeugbelastung und konstanter Bohrqualität. Schnelleres und wirtschaftlicheres Bohren durch gehobene Oberflächen Die TIN‑Beschichtung reduziert die Reibung zwischen Bohrer und Werkstück, wodurch die Wärmeentwicklung und der Verschleiß sinken. In Kombination mit dem geschliffenen HSS‑G Material ermöglicht dies bis zu 40 % schnellere Vorschübe und reduziert die erforderliche Anpresskraft deutlich. Das spart Zeit und verlängert die Lebensdauer des Werkzeugs. Präzision durch geschliffene Geometrie und Normenkonformität Als geschliffener Bohrer (HSS‑G) mit DIN 338 Norm gewährleistet das Werkzeug hohe Rundlaufgenauigkeit und scharfe Schneiden. Der Typ N (Normalspirale) ist speziell für Metall geeignet und erzeugt saubere Späneführung bei legierten und unlegierten Stählen sowie Gusseisen. Diese Eigenschaften erleichtern präzise Passungsbohrungen in Werkstatt und Produktion. Materialvielfalt und Einsatzbereiche kurz erklärt Der Bohrer ist ausgelegt für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetalle wie Kupfer oder Bronze und Hartkunststoff. Für Anwender ohne tiefe Materialkenntnis: HSS‑G steht für Schnellarbeitsstahl mit geschliffener Geometrie, ideal für feste Werkstoffe; TIN sorgt für zusätzlichen Verschleißschutz und bessere Wärmeabfuhr. Praxisorientierte Anwendungsempfehlung Im 2–13 mm Bereich zählt dieser 7 mm Bohrer zur Standardklasse und eignet sich sowohl für Handgeführte Akkubohrschrauber als auch für stationäre Bohrmaschinen. Zur Erzielung optimaler Ergebnisse empfiehlt sich Vorbohren bei höheren Anforderungen an Maßhaltigkeit sowie die Nutzung von Kühlschmierstoff bei warmfesten Werkstoffen. Für wen dieses Werkzeug entwickelt wurde Dieses Werkzeug richtet sich an professionelle Anwender in Werkstatt, Montage und Instandhaltung sowie anspruchsvolle Heimwerker, die Wert auf Präzision, Standzeit und eine robuste Handhabung legen. Die Profi Line Ausstattung und die kurze Bauform machen den Bohrer zur ersten Wahl bei harten Materialien und engen Toleranzen. Empfehlung: Den MetavCUT Profi Line Spiralbohrer in Kurzausführung für präzise Metallbohrungen wählen und bei technischen Fragen gern METAV Werkzeuge kontaktieren unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer 7 mm, Typ N, kurz Marke: MetavCUT SKU: 41070-FDA Material: HSS‑G (geschliffen) Ausführung: kurz, geschliffen Beschichtung: TIN‑beschichtet Spitzenwinkel: 135° Norm: DIN 338 Gesamtlänge: 109 mm Spirallänge: 69 mm Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine / stationäre Maschinen Modellserie: Profi Line Farbe: TIN‑beschichtet Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Was bedeutet HSS‑G beim MetavCUT Spiralbohrer 7 mm und wofür ist er geeignet? HSS‑G steht beim MetavCUT Spiralbohrer 7 mm für geschliffenen Schnellarbeitsstahl; diese Ausführung ist besonders geeignet für präzise Bohrungen in harten Werkstoffen wie legierten Stählen und Gusseisen. Warum ist die TIN‑Beschichtung beim MetavCUT Spiralbohrer 7 mm vorteilhaft? Die TIN‑Beschichtung des MetavCUT Spiralbohrers 7 mm reduziert Reibung und erhöhte Wärmeabfuhr, wodurch Verschleiß minimiert und die Standzeit unter Betriebsbedingungen verlängert wird. Kann der MetavCUT Spiralbohrer 7 mm an einer Handbohrmaschine eingesetzt werden? Ja, der kurze Spiralbohrer 7 mm von MetavCUT ist für Handbohrmaschine geeignet und bietet durch die kürzere Auskraglänge bessere Stabilität als lange Ausführungen. Für welche Materialien ist der MetavCUT Spiralbohrer 7 mm nicht empfohlen? Der MetavCUT Spiralbohrer 7 mm ist nicht ideal für sehr weiche Materialien, bei denen die Normalspirale schlechte Spanabfuhr liefert, oder für hochlegierte Werkstoffe ohne geeignete Kühlung. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#41070-FDA","sku":"41070-FDA","mpn":"41070-FDA","name":"Spiralbohrer 7 mm","description":"Kurzspiralbohrer 7 mm, Typ N, HSS-G geschliffen, TIN-beschichtet, 135° Spitzenwinkel, DIN 338; entwickelt für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen; kurze Ausführung für erhöhte Stabilität und längere Standzeit.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer 7 mm"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Material","value":"HSS-G (geschliffen)"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz, geschliffen"},{"@type":"PropertyValue","name":"Beschichtung","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"109 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"69 mm"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine / stationäre Maschinen"},{"@type":"PropertyValue","name":"Farbe","value":"TIN-beschichtet"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Preis Netto","value":"4.08 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Was bedeutet HSS-G beim Spiralbohrer 7 mm und wofür ist er geeignet?","acceptedAnswer":{"@type":"Answer","text":"HSS-G steht für geschliffenen Schnellarbeitsstahl; der Spiralbohrer 7 mm eignet sich damit besonders für präzise Bohrungen in harten Werkstoffen wie legierten und unlegierten Stählen sowie Gusseisen."}},{"@type":"Question","name":"Welche Vorteile bietet die TIN-Beschichtung beim Spiralbohrer 7 mm?","acceptedAnswer":{"@type":"Answer","text":"Die TIN-Beschichtung reduziert Reibung und Verschleiß, verbessert die Wärmeabfuhr und verlängert die Standzeit des Spiralbohrers 7 mm bei Metallbearbeitung."}},{"@type":"Question","name":"Ist der Spiralbohrer 7 mm für Handbohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der kurze Spiralbohrer 7 mm ist für Handbohrmaschine geeignet und bietet durch die reduzierte Auskraglänge bessere Stabilität als längere Ausführungen."}},{"@type":"Question","name":"Für welche Materialien ist der Spiralbohrer 7 mm ausgelegt?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7 mm eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Kupfer, Bronze, Neusilber und Hartkunststoff."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/41070-FDA","dateModified":"2026-03-31T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Kurzspiralbohrer nach DIN 338"},{"@type":"Thing","name":"HSS-G geschliffen für Metallbearbeitung"},{"@type":"Thing","name":"TIN-Beschichtung für erhöhte Standzeit"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine empfohlen"},{"@type":"Thing","name":"Einsatz in Werkstatt und Montage"},{"@type":"Thing","name":"Geeignet für legierten Stahl"}]}]}

Twist Drill (Twist Drill) – Ø 7 mm · 135° tip · HSS‑G · DIN 338 · with W‑point and triangular shank · Model: Spezial · Brand: MetavCUT The Twist Drill is a precision metal‑drilling tool for handheld and machine use, designed to deliver fast, centred holes in steels, non‑ferrous metals and engineering plastics. Rapid drilling performance with HSS‑G material 135° tip for cleaner entry in hard materials Triangular shank for secure grip in cordless drills Conforms to DIN 338 for short twist drills Special W‑point grind reduces required feed force Faster, cleaner holes in demanding materials The Twist Drill made from HSS‑G combines high cutting speed with good wear resistance, so drilling progress is noticeably quicker than with conventional HSS drills. The 135° tip angle is optimised for harder workpieces such as stainless steel and other tough alloys, meaning reduced wandering at the start and cleaner hole edges. For users this translates into less rework and more precise bores even under repetitive use. Efficient power transfer and easy handling with handheld tools The design with a triangular shank ensures a positive fit in chucks and quick torque transmission, ideal for use with a Drilling Machine or cordless hand drills. The integrated W‑point (multi‑bevel cutting edge) improves centring and reduces the required axial force, so less effort is needed during operation and the risk of drill deflection is lower. Professionals benefit from faster cycle times and safer handling on the job. Application range and target users This Spezial series Twist Drill is intended primarily for metalworking: alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. It is therefore particularly suitable for workshop technicians, toolmakers and maintenance teams who need a reliable general‑purpose metal drill. The robust geometry also makes it useful for occasional work in aluminium and wood where a durable, resharpenable drill is preferred. Standards, maintenance and technical advantages Manufactured to DIN 338, the short twist drill geometry ensures compatibility with industry expectations for short HSS drills with cylindrical or polygonal shanks. The HSS‑G substrate allows resharpening without significant loss of accuracy, extending tool life when compared to coated disposable types. A correctly reground W‑point preserves centring and chip evacuation, reducing heat build‑up and helping to maintain hole quality over repeated sharpening cycles. We recommend the MetavCUT Spezial Twist Drill for tradespeople and engineers who require fast, precise drilling in metals and engineering plastics; for further technical advice or to confirm suitability for a specific application please contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 55070-FDA Diameter: 7 mm Tip angle: 135° Material: HSS‑G Spiral length: 69 mm Overall length: 109 mm Shaft execution: with W‑point and triangular shank Model series: Spezial Norm: DIN 338 Application: Drills for metal For use with: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (Twist Drill) be used on? The MetavCUT Twist Drill is designed for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals, aluminium and hard plastics; its geometry and HSS‑G material also allow occasional use in wood where a resharpenable metal drill is acceptable. What are the three main drill types? The three main drill types are metal drills, wood drills and stone/concrete drills, each optimised in geometry and material for the specific substrate and cutting conditions.

Twist Drill — 7 mm, 135° tip, long, bright finished, HSS‑G, DIN 340 The Twist Drill long HSS‑G 7 mm is built for deep metal drilling with a 135° tip, suited to hard materials and less accessible bore locations on a Drilling Machine. Long Twist Drill for deep, hard-to-reach holes HSS-G ground for faster drilling and precise holes 135° tip suited for hard materials like stainless steel Fully ground shank ensures high runout accuracy DIN 340 standard for long drill execution Faster deep drilling with reduced effort for workshop use Long execution according to DIN 340 offers clear practical benefits: the increased Spiral Length and overall length enable drilling into deeper workpieces or into recesses where standard bits fall short. Because the flute geometry is ground, the bit cuts with very sharp edges, which can result in up to 40% faster drilling and requires substantially lower feed pressure compared with conventional HSS bits. The practical effect is less operator fatigue, more consistent bore quality and a faster cycle time for repetitive metalworking tasks. Precise holes in hard materials thanks to HSS‑G and 135° tip A HSS‑G (ground high‑speed steel) blank combined with a 135° tip improves centring and reduces walking on harder substrates such as stainless steel. The ground geometry gives high Runout Accuracy and clean chip evacuation, producing more concentric and burr‑reduced holes. Users benefit from better repeatability and less post‑processing. Note that ground HSS bits can be more brittle than rolled types, so controlled feeds and appropriate coolant are advised to avoid chipping. Built for metalworking: materials and machine compatibility This long variant is intended primarily for metallic materials: alloyed and unalloyed steel, cast steels, grey and spheroidal cast iron, sintered iron, non‑ferrous metals and hard plastics. It is compatible with handheld Drilling Machines and bench drills when greater reach is needed. For drilling in steels up to the typical range of 900 N/mm² the geometry and tip angle help maintain performance while minimising chatter and deflection, delivering holes that meet machining tolerances in assembly and maintenance operations. Practical handling advice to extend service life and hole quality Because the flutes and cutting geometry are produced by grinding, re‑sharpening is straightforward and preserves cutting performance. For best results, use moderate cutting speeds, steady feed and regular cooling or lubrication to manage heat and chip formation. When drilling deep bores, peck drilling or intermittent withdrawal will improve chip evacuation and reduce risk of breakage. Store bits to avoid impact and inspect for wear before reuse to ensure continued precision. Strong recommendation: For demanding deep‑hole metal drilling choose the MetavCUT long HSS‑G Twist Drill for reliable performance; METAV Werkzeuge offers comprehensive technical advice and support — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 53070-FDA Durchmesser: 7 mm Spitzenwinkel: 135° Ausführung: long Gesamtlänge: 156 mm Spirallänge: 102 mm Farbe: bright finished Schaft Ausführung: fully ground Material: HSS-G Norm: DIN 340 Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is this Twist Drill suitable for? The MetavCUT Twist Drill long 7 mm is suitable for metalworking tasks where deeper or less accessible holes are required; the HSS‑G ground geometry and 135° tip make it especially effective for alloyed and unalloyed steels, cast materials and hard plastics. Which three drill types exist? There are three common drill categories: metal drill bits, wood drill bits and stone/concrete drill bits; the MetavCUT Twist Drill belongs to the metal drill bit family and is optimised for that application. What is a Twist Drill used for? A Twist Drill is principally used for machining high‑strength materials and larger bore diameters; its shape is easy to re‑grind and it endures higher loads while keeping a sharp cutting edge.

Spiralbohrer 8,5 mm (HSS, DIN 345) – rollgewalzt, Schwarz, Morsekegel Der Spiralbohrer rollgewalzt ist ein HSS-Bohrer für präzise Metallbohrungen in Ständerbohrmaschinen und für Anwendungen mit Morsekegelaufnahme geeignet. Hochfeste HSS-Ausführung für Metallbohrungen Rollgewalzte Spiralform erhöht Bruchsicherheit Morsekegelschaft für feste Werkzeugaufnahme Spitzenwinkel 118° für sauberes Eindringen Spirallänge 87 mm für effiziente Spanabfuhr Robuste Werkstoffwahl für zuverlässige Bohrungen Der Spiralbohrer aus HSS profitiert von der rollgewalzten Herstellung: Ein erhitzter Rundstab wird durch Walzen in die Spiralform gebracht, was die Bruchsicherheit erhöht und den Bohrer elastischer macht. Für Alltagseinsätze in Werkstatt und Montage bedeutet das weniger Ausfall durch Bruch und eine längere Nutzungsdauer. Die Haltbarkeit zeigt sich besonders bei wechselnden Belastungen und geringfügigen Rundlauffehlern. Effizienter Einsatz im Standard-Bereich für Metall Mit einem Durchmesser von 8,5 mm liegt dieser Bohrer im Standard-Bereich, ideal für dünne bis mittlere Bleche, Profile und Flachstähle. Die Konstruktion erlaubt schnelles Vorankommen in legiertem und unlegiertem Stahl sowie in Nichteisenmetallen und Kunststoffen bis ca. 900 N/mm² Zugfestigkeit. Für handgeführte Akkubohrschrauber empfiehlt sich kurzes Anpunkten mit Zentrierbohrer bei hoher Präzision, stationäre Maschinen profitieren von konstantem Vorschub. Sichere Kraftübertragung durch Morsekegelaufnahme Die Morsekegelschaft sorgt für formschlüssige Verbindung zur Maschine, was hohe Drehmomente sicher überträgt und die Arbeit an Ständerbohrmaschinen oder Reitstöcken erleichtert. Durch diese Aufnahme sitzt der Bohrer fest und lässt sich unkompliziert austreiben, wenn nötig. Die Spirallänge 87 mm unterstützt dabei die Spanableitung, wodurch sich Stau und Überhitzung reduzieren lassen. Praktische Anwendungstipps für saubere Ergebnisse Der Spitzenwinkel 118° erleichtert das Eindringen in weichere Materialien und sorgt für saubere Bohrbilder ohne übermäßiges Wandern auf gewölbten Flächen. Bei zäheren Werkstoffen empfiehlt sich niedrige Schnittgeschwindigkeit und Kühlschmierstoff, um Standzeit zu erhöhen. Ein Hinweis zur Handhabung: Vor dem Bohren kurz zentrieren, bei tiefen Löchern stufenweise aufbohren, um die Querschneide zu entlasten und Verformungen zu vermeiden. Die MetavCUT Standard Line ist die Empfehlung für robuste und zuverlässige Metallbohrungen; bei Unsicherheiten oder Fragen zur Anwendung berät METAV Werkzeuge gern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer 8,5 mm Marke: MetavCUT SKU: 54085-FDA Durchmesser: 8,5 mm Material: HSS Ausführung: rollgewalzt Farbe: Schwarz Norm: DIN 345 Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Schaft Ausführung: Morsekegel Modellserie: Standard Line Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien eignet sich der Spiralbohrer von MetavCUT am besten? Der Spiralbohrer (MetavCUT, HSS-Bohrer) ist für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle sowie Kunststoffe ausgelegt und empfiehlt sich für Werkstücke bis etwa 900 N/mm² Zugfestigkeit. Kann der Spiralbohrer mit einem handgeführten Akkubohrschrauber benutzt werden? Der MetavCUT Spiralbohrer kann mit handgeführten Akkubohrschraubern verwendet werden; bei hoher Präzision sollte jedoch vorher mit einem Zentrierbohrer angepunktet werden, um Wandern zu vermeiden. Welche Vorteile bietet die rollgewalzte Ausführung gegenüber geschliffenen Bohrern? Die rollgewalzte Herstellung macht den HSS-Bohrer zäher und bruchsicherer, was besonders bei kleinen Durchmessern und wechselnden Belastungen die Standzeit erhöht und das Bruchrisiko reduziert. Wie löse ich den Bohrer aus einer Morsekegelaufnahme, wenn er festsitzt? Bei festsitzendem Bohrer in der Morsekegelaufnahme hilft meist der Austreiblappen oder ein passender Keil; METAV Werkzeuge berät bei Bedarf gern telefonisch oder per eMail. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#54085-FDA","sku":"54085-FDA","mpn":"54085-FDA","gtin13":"","name":"Spiralbohrer 8,5 mm, 54085-FDA","description":"Spiralbohrer 8,5 mm, HSS, rollgewalzt, Schwarz, Morsekegel nach DIN 345; geeignet für Metallbohrungen in Ständerbohrmaschinen und Montage; robust, bruchsicher und mit guter Spanabfuhr durch 87 mm Spirallänge.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer 8,5 mm"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,5 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Ausführung","value":"rollgewalzt"},{"@type":"PropertyValue","name":"Farbe","value":"Schwarz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 345"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"168 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"87 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"Morsekegel"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Preis Netto","value":"7.84"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien eignet sich der Spiralbohrer am besten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 8,5 mm von MetavCUT eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle sowie Kunststoffe und ist empfohlen für Werkstücke bis ca. 900 N/mm² Zugfestigkeit."}},{"@type":"Question","name":"Kann der Spiralbohrer mit einem handgeführten Akkubohrschrauber benutzt werden?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 8,5 mm von MetavCUT kann mit handgeführten Akkubohrschraubern verwendet werden; bei hoher Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um Wandern zu vermeiden."}},{"@type":"Question","name":"Welche Vorteile bietet die rollgewalzte Ausführung gegenüber geschliffenen Bohrern?","acceptedAnswer":{"@type":"Answer","text":"Die rollgewalzte Ausführung des MetavCUT Spiralbohrers macht den HSS-Bohrer zäher und bruchsicherer, erhöht die Standzeit bei wechselnden Belastungen und reduziert das Bruchrisiko, besonders bei kleineren Durchmessern."}},{"@type":"Question","name":"Wie löse ich den Bohrer aus einer Morsekegelaufnahme, wenn er festsitzt?","acceptedAnswer":{"@type":"Answer","text":"Bei festsitzendem Spiralbohrer 8,5 mm in der Morsekegelaufnahme hilft meist ein Austreiblappen oder ein passender Keil; METAV Werkzeuge berät bei Bedarf gern telefonisch oder per E-Mail."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/54085-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Morsekegelschaft"},{"@type":"Thing","name":"Rollgewalzte HSS-Ausführung"}],"mentions":[{"@type":"Thing","name":"DIN 345 Norm"},{"@type":"Thing","name":"Spirallänge 87 mm"},{"@type":"Thing","name":"Spitzenwinkel 118°"}]}]}

MetavCUT Twist Drill (Type N) — 8.1 mm · 118° tip · HSS · Short · Black · DIN 338 A MetavCUT Twist Drill (Type N) for precision metal drilling, designed as a short HSS drill for use with hand drilling machines. Short HSS construction for increased stability Precision 8.1 mm diameter for consistent hole quality 118° tip angle for reliable centring in metals Conforms to DIN 338 for standardised short twist drills Suitable for hand drilling machines and workshop use Stable, accurate holes for metalworking tasks The HSS material of this short twist drill offers a reliable balance of hardness and toughness for metalworking. Thanks to its short design, the tool exhibits reduced deflection and higher stability during drilling, which translates into more precise holes and less wear on the drill shank. This characteristic is particularly important when working with tougher materials or when drilling by hand, since a more rigid tool reduces the risk of wobble and off-centre bores. Cutting geometry optimised for clean starts and centring Equipped with a 118° tip and the classic Type N spiral, this twist drill provides predictable entry behaviour and good centring on a variety of metals. A 118° point angle reduces the initial cutting force and supports easier alignment on slightly curved or irregular surfaces. The combination of point geometry and the normal spiral pitch means the drill removes chips reliably while maintaining a controlled cutting action—an advantage for both manual drilling and machine use. Designed for workshop versatility and user convenience With a spiral length of 75 mm and an overall length of 117 mm, the short execution ensures compact handling and improved rigidity in confined setups. The MetavCUT Twist Drill is finished in black and manufactured to DIN 338 standards, making it a suitable choice for drilling alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics. The roll-walzen HSS production process yields an elastic drill that is easier to resharpen and reduces brittle fracture risk for smaller diameters. Choose the MetavCUT Twist Drill for workshop-grade metal drilling — METAV Werkzeuge offers expert technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) to help select the right tool for the task Technical data Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40081-FDA Durchmesser: 8.1 mm Spitzenwinkel: 118° Spirallänge: 75 mm Gesamtlänge: 117 mm Farbe: black Ausführung: short Typ: Type N Material: HSS Norm: DIN 338 Anwendung: Drills for metal Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (Type N) be used on? The MetavCUT Twist Drill Type N is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics; its HSS composition makes it versatile for a broad range of metal drilling tasks. Is the MetavCUT Twist Drill suitable for use with a hand drilling machine? Yes, the MetavCUT Twist Drill in short execution is designed for compatibility with hand drilling machines and offers improved rigidity and control during manual operation. For what is a Twist Drill used? A Twist Drill such as the MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger hole diameters. Its form allows for straightforward resharpening and it withstands greater loads. Which three drill types exist? The main categories are metal drills (like the MetavCUT Twist Drill), wood drills and stone/concrete drills. Why are Twist Drills sharpened at the point? The point sharpening reduces the cross‑cut at the tip of the twist drill; sharpening lowers friction forces and therefore requires less feed force while improving centring in the workpiece. Can a metal drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but it typically offers poorer guidance and a less clean finish compared with dedicated wood drills; however it is easier to resharpen and shows less self‑feeding tendency. At which drilling depths is the Twist Drill most commonly used? The Twist Drill is the most used tool for solid drilling. For diameters up to 20 mm and drilling depths up to 100 mm it is commonly employed for through‑holes and general metalwork. What is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to HSS is not always correct. When choosing between the two, assess whether working conditions justify a higher investment in HSSE for your specific applications.

Spiralbohrer — kurzer HSS‑E Metallbohrer Ø 8,1 mm · 135° Spitzenwinkel · Typ N · 5% kobaltlegiert · geschliffen · DIN 338 Der Spiralbohrer ist ein kurzer HSS‑E Spiralbohrer nach DIN 338 und eignet sich für präzise Metallbohrungen mit Handbohrmaschine. Kurze Ausführung für höhere Stabilität 5% Kobaltlegierung für bessere Warmfestigkeit 135° Spitzenwinkel für harte Werkstoffe Geschliffene Geometrie für saubere Bohrlöcher DIN 338 Standard, geeignet für stationäre Maschinen Höhere Stabilität für präzise Metallbohrungen Dank der kurzen Ausführung reduziert sich die Auskraglänge deutlich, wodurch die Neigung zum Verbiegen minimiert wird. Das Ergebnis sind präzise Bohrlöcher selbst bei längeren Einsatzzeiten, weil weniger Schwingung entsteht. Für Anwender bedeutet das eine höhere Wiederholgenauigkeit und geringeren Ausschuss beim Bohren in Baustahl, Gusseisen und anderen Metallen. Die kompakte Bauform erleichtert zudem die Handhabung in beengten Arbeitsbereichen. Material und Wärmebeständigkeit für anspruchsvolle Einsätze Die HSS‑E Legierung mit 5% Kobalt erhöht die Warmfestigkeit und verbessert die Standzeit bei höheren Schnittgeschwindigkeiten. Gerade beim Bohren in legierten Stählen sorgt die Kobaltanteil für geringere Wärmeeinwirkung auf die Schneidekante. Dadurch bleibt die Schneidfähigkeit länger erhalten, was insbesondere bei Serien‑ und Daueranwendungen zu spürbaren Effizienzgewinnen führt. Geschliffene Geometrie für saubere Bohrlöcher Die geschliffene Fertigung gewährleistet scharfe Kanten und hohe Rundlaufgenauigkeit. Das führt zu saubereren Einbohrungen und reduziert Nacharbeit wie Entgraten oder Nachschleifen. Bei der Bearbeitung von dünnen Blechen und Präzisionsbauteilen macht sich die verbesserte Geometrie besonders bemerkbar, weil die Bohrung sehr zentriert und mit minimalem Wandversatz entsteht. Ausgewählte Geometrie: 135° Spitzenwinkel und Typ N Mit dem 135° Spitzenwinkel ist dieser Bohrer optimiert für härtere Werkstoffe, da der größere Winkel die Anbohrphase verkürzt und das Abgleiten reduziert. Die Typ N Normalspirale steht für universelle Einsatzbarkeit beim Bohren von Metall und bietet eine ausgewogene Spanabfuhr für die angegebenen Durchmesser. Diese Kombination erleichtert das Anbohren und sorgt für stabile Vorschubbedingungen. Einsatzgebiet und Maschinenkompatibilität Konzipiert für den Einsatz an Handbohrmaschinen und stationären Bohrmaschinen, erfüllt der Bohrer die Anforderungen der DIN 338 für kurze Spiralbohrer mit Zylinderschaft. Durch die robuste Bauweise eignet sich das Werkzeug für Werkstätten, Montageeinsätze und anspruchsvolle Reparaturarbeiten. Bei tieferen Löchern oder besonders zähen Materialien empfiehlt sich eine geeignete Kühlung und gegebenenfalls Vorbohren. Praxistipps für längere Standzeit und sichere Anwendung Für eine verlängerte Standzeit sollten geeignete Schnittgeschwindigkeiten und Schmierstoffe verwendet werden; bei harten Stählen reduziert Kühlung thermische Belastungen. Vorbohren mindert die Belastung der Querschneide, insbesondere bei größeren Durchmessern. METAVCUT Bohrer profitieren von sachgerechter Nutzung und regelmäßiger Kontrolle der Bohrermontage, um Rundlauffehler und vorzeitigen Werkzeugverschleiß zu vermeiden. Vertrauen Sie auf die Präzision der MetavCUT Standard Line und sichern Sie sich mit dem kurzen HSS‑E Bohrer die gewünschte Bohrqualität — bei Fragen oder Bedarf an technischer Beratung steht METAV Werkzeuge gern per E‑Mail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 zur Verfügung Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 47081-FDA Durchmesser: 8,1 mm Material: HSS-E Ausführung: kurz Spitzenwinkel: 135° Typ: Typ N Farbe: 5% kobaltlegiert Schaftausführung: geschliffen Gesamtlänge: 117 mm Spirallänge: 75 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (Typ N) mit HSS‑E und 5% Kobalt eignet sich für das Bohren in härteren Werkstoffen wie legiertem Stahl und ist somit auch für viele Edelstahlanwendungen verwendbar, wobei eine passende Kühlung empfohlen wird. Eignet sich der Spiralbohrer von MetavCUT für Handbohrmaschinen? Ja, der Spiralbohrer von MetavCUT wurde sowohl für Handbohrmaschine als auch stationäre Maschinen ausgelegt; die kurze Ausführung erhöht dabei die Stabilität bei handgeführten Einsätzen. Wie erhöht man die Standzeit des MetavCUT Spiralbohrers? Die Standzeit des MetavCUT Spiralbohrers wird durch richtige Schnittgeschwindigkeit, Einsatz von Kühlschmierstoffen und gegebenenfalls Vorbohren verbessert; zudem empfiehlt sich die Nutzung im angegebenen Materialspektrum. Entspricht der Spiralbohrer der Norm DIN 338 und was bedeutet das? Der Spiralbohrer von MetavCUT entspricht der DIN 338, was die Klassifizierung kurzer Spiralbohrer mit Zylinderschaft regelt und damit Maßhaltigkeit sowie Kompatibilität zu gängigen Halterungen sicherstellt. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#47081-FDA","sku":"47081-FDA","mpn":"47081-FDA","name":"Spiralbohrer 47081-FDA","description":"Kurzer HSS-E Spiralbohrer Ø 8,1 mm, 135° Spitzenwinkel, Typ N, 5% kobaltlegiert, geschliffen, DIN 338; geeignet für präzise Metallbohrungen mit Handbohrmaschine und stationären Maschinen; erhöhte Warmfestigkeit und Standzeit durch Kobaltlegierung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,1 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-E"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"5% kobaltlegiert"},{"@type":"PropertyValue","name":"Schaftausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT als kurzer HSS-E Bohrer Ø 8,1 mm mit 5% Kobalt und Typ N eignet sich für viele Edelstahlanwendungen, wobei geeignete Kühlung empfohlen wird."}},{"@type":"Question","name":"Eignet sich der Spiralbohrer von MetavCUT für Handbohrmaschinen?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT ist in kurzer Ausführung gefertigt und damit auch für Handbohrmaschine geeignet; die kurze Bauform erhöht die Stabilität bei handgeführten Einsätzen."}},{"@type":"Question","name":"Wie erhöht man die Standzeit des MetavCUT Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Die Standzeit des MetavCUT Spiralbohrers wird durch richtige Schnittgeschwindigkeit, den Einsatz von Kühlschmierstoffen und gegebenenfalls Vorbohren verbessert; Nutzung im vorgesehenen Materialspektrum empfohlen."}},{"@type":"Question","name":"Entspricht der Spiralbohrer der Norm DIN 338 und was bedeutet das?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer entspricht DIN 338, was die Klassifizierung kurzer Spiralbohrer mit Zylinderschaft regelt und Maßhaltigkeit sowie Kompatibilität zu gängigen Halterungen sicherstellt."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-47081-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Kurze HSS-E Spiralbohrer"},{"@type":"Thing","name":"Metallbohrung und Montageanwendung"},{"@type":"Thing","name":"DIN 338 Klassifizierung"}],"mentions":[{"@type":"Thing","name":"Kühlung empfohlen"},{"@type":"Thing","name":"Vorbohren bei größeren Durchmessern"},{"@type":"Thing","name":"Geschliffene Geometrie für hohe Rundlaufgenauigkeit"}]}]}

Twist Drill — Type N short, Ø 8.1 mm, 135° point angle, Bright finished, Short execution, DIN 338, HSS‑G (MetavCUT) A Twist Drill (Type N) designed for precise metal drilling on drilling machines and stationary machine tools. Short design for higher stability and precision HSS‑G fully ground for sharp, clean holes 135° point angle suited for hard materials like stainless steel Conforms to DIN 338 for short twist drills Short overall length reduces vibration and deflection Greater Stability and Faster Drilling for Metalwork The short design of this Twist Drill delivers increased Stability and reduced deflection when working with hard materials. Shorter overhang from the Chuck improves concentricity and lowers the risk of bending, which directly raises hole accuracy. In many industrial applications the HSS‑G ground geometry achieves up to 40% faster drilling and requires 50% less feed force compared with conventional HSS drills, so productivity improves while Operator fatigue decreases. Precise Tip Geometry for Tough Materials A 135° point angle optimises entry into hard and abrasion‑resistant metals by reducing the initial bite and spreading heat. For less experienced users: the point angle is the cone at the Drill Tip that influences how quickly the tool penetrates and how well it centres. With Type N normal spiral geometry this tool balances cutting speed and chip evacuation, making it particularly effective for Stainless Steel, Cast Iron and Alloyed Steels. Engineered Finish and Compliance for Reliable Results The fully ground flute and land geometry (HSS‑G) produce very sharp cutting edges and excellent Runout accuracy, yielding cleaner holes and longer life under correct conditions. The product conforms to DIN 338, which classifies short Twist Drills with cylindrical shanks and specifies manufacturing tolerances and execution variants. This standardisation supports reproducible setup and interchangeability in workshop environments. Recommended Use and Machine Compatibility Designed primarily for machining metal, this Twist Drill suits both stationary machine tools and drilling machines; it is most effective when used with appropriate cutting speeds, coolant and steady clamping. For hand‑held Drilling Machines take care with feed and torque limits because fully ground HSS drills can be more brittle than rolled variants; cooling and moderate speeds extend tool life. Typical applications include holes in unalloyed and alloyed steels, castings, sintered parts and hard plastics. Material Care and Maintenance Tips The HSS‑G material benefits from correct machining parameters: use steady coolant/lubrication for deep or high‑speed holes, and avoid excessive pecking without coolant to prevent heat build‑up. The fully ground geometry makes re‑sharpening straightforward for experienced toolmakers, while maintaining concentricity is essential to prevent premature breakage. For best performance, inspect the Twist Drill for wear and micro‑chipping before each critical operation. Strong recommendation: Choose the MetavCUT Twist Drill (Type N, HSS‑G) for demanding metal drilling tasks and contact METAV Werkzeuge for expert advice and application support — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 45081-FDA Diameter: 8.1 mm Point angle: 135° Type: Type N Colour: Bright finished Execution: Short Spiral length: 75 mm Total length: 117 mm Shank execution: Fully ground Material: HSS-G Standard: DIN 338 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for drilling metal; it excels in producing precise holes in alloyed and unalloyed steels, cast components and hard plastics when used on drilling machines or stationary machine tools. Can the MetavCUT Twist Drill be used in a hand drill? The MetavCUT Twist Drill can be used in a hand drilling machine with caution; due to its short, fully ground HSS design it performs best in well‑supported setups and benefits from controlled feed, cooling and firm clamping to avoid breakage. For what is a Twist Drill used? Twist Drills are mainly applied to machining high‑strength materials and larger diameters; their form is easy to re‑grind and they withstand greater loads, making them suitable for demanding metalwork. Which three drill types exist? There are three main drill types: Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills sharpened (pointed)? Sharpening reduces the cross‑cut at the tip, which lowers friction and the required feed force while improving the drill’s centring in the workpiece. Can you drill wood with a Twist Drill? Metal drills can be used in wood, but they offer poorer guidance and a less clean finish; however, they are easier to resharpen and have lower self‑feed tendencies. At which drilling depths is the Twist Drill most commonly used? Solid drilling is commonly executed with Twist Drills; they are most frequently the tool of choice for diameters up to 20 mm and drilling depths up to 100 mm. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect; choice should be based on the specific working conditions and whether those conditions justify the higher cost of HSSE.

MetavCUT Twist Drill — Short HSS‑G Twist Drill (Ø 8.1 mm, 135° Tip, Type N, Bright Finished, DIN 338) The MetavCUT Twist Drill is a short Type N Twist Drill designed for precision metalworking, offering a bright finished surface and a 135° tip for improved entry into hard materials. Short HSS-G design for increased stability 8.1 mm diameter for precision metal drilling 135° tip for harder materials like stainless steel Fully ground shank for high concentricity Compliant with DIN 338 for short Twist Drills Stability and faster drilling for demanding metalwork Short design combined with HSS‑G grinding provides tangible advantages in daily workshop use. The reduced overhang reduces vibration and bending so that drilling stays precise even under higher loads. Because the Flute Geometry is CNC‑ground, the drill cuts with sharply defined edges; this results in up to 40% faster drilling and requires about 50% less thrust than comparable conventional HSS tools, which reduces operator fatigue and machine wear. Users benefit from cleaner holes and improved tool life when used with appropriate cooling. Reliable performance in hard and alloyed steels A 135° Tip reduces the tendency to wander on hard surfaces and shortens the initial drilling time for tougher materials such as Stainless Steel and alloyed Steels. As a Type N normal‑spiral Twist Drill, this tool is optimised for Metal applications and provides consistent chip evacuation under typical machining conditions. Compliance with DIN 338 ensures that dimensions and tolerances match workshop expectations for short Twist Drills, making the drill an efficient choice for production and repair tasks where reproducible results matter. Built for precision and concentricity The Fully Ground Shank and accurate manufacturing in the Profi Line series deliver high concentricity at the chuck. This construction minimises runout and produces rounder, more accurate holes when compared to rolled alternatives. For work on stationary or mobile machine tools, the short overall length improves rigidity and gives craftsmen more control during finishing and reaming operations. For those who recondition tools, the ground geometry is also simpler to resharpen while maintaining cutting accuracy. Practical guidance and application areas This Twist Drill has been developed primarily for drilling in a range of metals including alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The short flute length (Spiral Length 75 mm) and total length of 117 mm make it especially suitable for precision work on machine tools and hand drills where stability is essential. If unsure whether this drill meets a specific application, METAV Werkzeuge offers expert consultation to advise on performance, cooling strategy and feed rates. Why choose this short Profi Line Twist Drill Manufacturing choices such as the grinding process (HSS‑G) result in sharper cutting edges and superior running accuracy. That precision translates into fewer rejects, less rework and a measurable increase in productivity in workshop environments. For operators facing frequent drilling in harder materials, the combination of Short Design and 135° Tip delivers a practical balance of durability and cutting performance without sacrificing control. Strong recommendation: Choose the MetavCUT Profi Line Short Twist Drill for precision metal drilling and contact METAV Werkzeuge for tailored technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 48081-FDA Model Series: Profi Line Type: Typ N Diameter: 8.1 mm Spiral Length: 75 mm Overall Length: 117 mm Tip Angle: 135° Material: HSS-G Execution: short Shank Execution: fully ground Colour: bright finished For Drill Machine: Drilling Machine Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main advantage of a short Twist Drill like the MetavCUT Twist Drill? A short Twist Drill such as the MetavCUT Twist Drill offers greater stability and less tendency to bend, which improves precision when drilling hard materials; the reduced overhang also means cleaner holes and more consistent results on machine tools. Is the MetavCUT Twist Drill suitable for stainless steel and hardened material? Yes, the MetavCUT Twist Drill with its 135° Tip and HSS‑G geometry is particularly suited to harder Materials including Stainless Steel; the tip angle shortens entry time and the ground flutes maintain sharpness for effective cutting. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength materials and for larger drill diameters. The shape is easy to resharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three common drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the chisel edge at the tip of the Twist Drill. Pointing decreases friction forces, which lowers the required feed force and helps the drill to centre more reliably in the workpiece. Can a metal drill be used in wood? A Metal Drill can be used in Wood, but guidance is reduced and the hole finish is usually not as clean. Metal Drills are easier to resharpen and typically have less self‑feeding tendency than dedicated wood drills. For which drilling depths is the Twist Drill most commonly used? A through hole is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE is always superior to HSS is not universally correct. When choosing between HSS and HSSE, evaluate whether your working conditions justify the higher cost of HSSE.

Twist Drill — Type N short, 8.25 mm, 118°, HSS, black (DIN 338) by MetavCUT The Twist Drill by MetavCUT is a short Type N metalworking drill bit designed for stable, precise boreholes in metals and suitable for use in drilling machines and hand drills. MetavCUT Twist Drill Type N for metal drilling 8.25 mm Diameter for precision holes 118° Point angle for fast centring Short execution for high stability Made from HSS per DIN 338 standard Precision and durability for metalworking applications The Twist Drill from MetavCUT combines a 8.25 mm diameter with a 118° tip geometry to deliver reliable entry and clean holes in a variety of metals. Manufactured from HSS (High Speed Steel), this short spiral drill offers a balance of hardness and elasticity, which reduces the risk of breakage when drilling smaller diameters and provides lasting edge retention under repeated loads. Compliance with DIN 338 ensures standardized dimensions and performance, so compatibility with typical chucks and machining fixtures is guaranteed. More stability and better control through a short design A short overall length and reduced protruding length increase stability and minimise wobble, which benefits precision work on tougher materials. The compact form reduces vibration and improves concentricity, making the drill ideal when accuracy matters and when working with portable Drilling Machines or bench-mounted equipment. Users benefit from easier handling, safer operation, and less tendency for the bit to deflect under sideways loads. Practical suitability and recommended uses This Type N Twist Drill is optimised for metalworking tasks: it is appropriate for alloyed and unalloyed steel, cast iron, non-ferrous metals and various plastics. The design supports both stationary Drilling Machines and suitable Hand Drills for robust workshop use. Professionals and advanced hobbyists who require dependable, repeatable results in mechanical, fabrication and maintenance contexts will find this short HSS drill a dependable choice. Material and tip geometry explained for confident selection HSS (High Speed Steel) provides elevated hot hardness and toughness compared with regular carbon steels, meaning the bit holds its edge under the heat generated by high RPM machining. The 118° Point angle favours faster centring and is typically chosen for softer to medium-hard materials; it also reduces thrust in the initial penetration. The Type N normal spiral geometry ensures efficient chip removal and general-purpose performance for metal drilling. For particularly hard alloys or specialised tasks, consider whether a different grade or coating would be advantageous. Choose the MetavCUT Twist Drill for reliable, precise metal drilling — for personalised technical advice or to confirm suitability for your exact application, contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 400825-FDA Diameter: 8.25 mm Point Angle: 118° Spiral Length: 75 mm Overall Length: 117 mm Execution: short Type: Type N Material: HSS Standard: DIN 338 Colour: black For: Drilling Machine (Hand drill) Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and drilling larger diameters in metalwork; its construction allows it to withstand higher loads and to be re-sharpened easily while maintaining performance. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill is suitable for use in a Hand Drill as well as in stationary Drilling Machines, though the short execution particularly improves stability and results when mounted in robust chucks or machine spindles. What are Twist Drills used for? Twist Drills such as this MetavCUT Type N are mainly applied to the machining of high-strength materials and larger bore diameters; their geometry makes them easy to re-grind and capable of withstanding substantial loads during metal drilling. Which three drill types exist? Common categories include Metal drills, Wood drills, and Stone/Concrete drills, where the MetavCUT Twist Drill belongs to the metal drill group. Why are Twist Drills sharpened (pointed)? The sharpening reduces the minor cutting edge at the tip, significantly lowering friction and therefore the required feed force; this also improves initial centring of the MetavCUT Twist Drill in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill can be used in wood, but the MetavCUT Type N metal drill provides less guidance and a less clean finish than a dedicated wood bit; however, it is easier to re-sharpen and shows less self-feeding tendency.

Twist Drill — Short HSS‑G Twist Drill, Diameter 8.25 mm, 135° tip, Type N, Bright finished, Fully ground shank, DIN 338 The Twist Drill short HSS‑G Type N is a compact metal‑drilling tool designed for precise work in hard materials, suitable for use in a Drilling Machine. Short design for higher rigidity and precision HSS‑G material for sharp, clean metal holes 135° tip for improved entry in hard materials Fully ground shank for excellent runout accuracy Compliant with DIN 338 for short twist drills Precision and stability for demanding metalwork The short HSS‑G Twist Drill from MetavCUT combines a reduced overhang with a robust geometry to deliver reliable concentricity and minimal deflection. Its short design reduces the unsupported length outside the chuck, which translates into higher stability and better hole accuracy when machining steels and other hard materials. For workshop and industrial applications where repeatable hole quality matters, this configuration helps maintain machining tolerances and reduces scrap rates. Faster penetration with lower feed force A HSS‑G (ground high speed steel) construction and a 135° tip angle optimise the cutting action for tougher metals, shortening the initial entry phase and lowering required thrust. The ground flute geometry provides sharp cutting edges that support faster drilling — the design enables up to around 40% faster progress and reduces required feed forces compared with conventional HSS variants, making the short drill particularly effective for alloyed and unalloyed steel, cast materials and hardened plastics. Explanation: ground (G) means the flutes are CNC‑ground rather than roll‑formed, yielding sharper edges and improved runout accuracy. Designed for metal, tailored to professional use As a Type N normal spiral, this short twist drill is engineered primarily for metalworking on stationary or portable Drilling Machines. Typical applications include drilling in steel, cast steel, cast iron, sintered iron and non‑ferrous metals. The fully ground shank supports precise clamping and is advantageous in production environments where high concentricity and repeatability are required. For less experienced users: Type N indicates a general‑purpose metal drill with a standard spiral suited to a wide range of ferrous materials. Norm conformity and manufacturing details that matter Compliance with DIN 338 identifies this tool as a short twist drill with a cylindrical shank produced to standardised dimensions and tolerances. The bright finished surface and the fully ground shaft contribute to predictable seating in chucks and collets. Because ground HSS variants can be more brittle than rolled types, cooling and controlled feeds are recommended for stationary operations to maximise tool life. The short length also reduces vibration, improving surface finish and hole roundness in high‑precision tasks. Strong recommendation: MetavCUT short HSS‑G Twist Drill for professional metal drilling — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge for competent consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 450825-FDA Typ: Type N Durchmesser: 8.25 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: short Schaft Ausführung: fully ground Farbe: bright finished Norm: DIN 338 Für Bohrmaschine: Drilling Machine Modellserie: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the ideal use of the Twist Drill by MetavCUT? The MetavCUT Twist Drill short HSS‑G is primarily used for machining high‑strength materials and larger drill diameters; its ground geometry makes it easy to regrind while withstanding greater loads, which suits heavy‑duty metalworking tasks. Which three drill types exist? When classifying common drills, there are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill category and is optimised for that purpose. Why are twist drills point‑sharpened? The point sharpening on a MetavCUT Twist Drill reduces the cross‑edge at the tip, which significantly lowers friction and therefore the required feed force, and it improves centring in the workpiece for more accurate starts. Can a Twist Drill for metal be used to drill wood? A MetavCUT metal Twist Drill can be used in wood, but it offers less guidance and a rougher finish than a purpose‑built wood drill; metal drills are easier to re‑sharpen and have less self‑feeding action. For which drilling depths is the Twist Drill commonly used? A through hole in solid material is typically made with a Twist Drill; for diameters up to around 20 mm and drilling depths up to about 100 mm, the short twist drill form is the most frequently used tool. Which is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to HSS is not universally correct. Evaluate working conditions to determine whether HSSE justifies a higher cost; MetavCUT recommends choosing material and coating based on specific machining demands.

Spiralbohrer – MetavCUT HSS, 8,2 mm, 118°, Typ N, kurz, schwarz, DIN 338 Der Spiralbohrer ist ein kurzer HSS-Bohrer nach DIN 338, entwickelt für präzise Metallbohrungen mit 8,2 mm Durchmesser und Einsatz an Handbohrmaschinen. Kurze Ausführung für hohe Stabilität beim Bohren HSS für Stahl, Gusseisen und Nichteisenmetalle Typ N Normalspirale, ideal für Metallbearbeitung Spitzenwinkel 118° für sichere Zentrierung und Anbohrung DIN 338 konform und passend für Handbohrmaschine HSS-Material für vielseitige Metallbearbeitung mit Robustheit Der Einsatz von HSS (High Speed Steel) macht den Bohrer widerstandsfähig gegenüber thermischer Belastung und eignet ihn für die Bearbeitung von legierten und unlegierten Stählen, Gusseisen, Nichteisenmetallen und Kunststoffen. Durch die Materialwahl wird eine gute Schnittfestigkeit erreicht, wodurch saubere Bohrbilder und gleichmäßige Spanabfuhr unterstützt werden. Diese Materialeigenschaft sorgt für Verlässlichkeit bei typischen Werkstatt- und Montagearbeiten. Perfekt für den Standard-Bereich: Einsatzempfehlung und Praxisnutzen Mit einem Durchmesser von 8,2 mm gehört der Bohrer in den Standard-Bereich (2,0–13,0 mm) und ist für den Alltagsgebrauch in Werkstatt, Montage und DIY bestens geeignet. Die Kombina­tion aus Typ N und kurzem Aufbau ermöglicht direktes Bohren in dünnen bis mittleren Blechen, Profilen und Flachstählen. Für besonders exakte Passungen empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, damit das Wandern auf der Oberfläche minimiert wird und das Ergebnis präzise bleibt. Kurze Ausführung, Maße und Bohrtechnische Hinweise für mehr Effizienz Die kurze Bauform verbessert die Stabilität durch geringe Auskraglänge; die Spirallänge 75 mm und Gesamtlänge 117 mm reduzieren Vibrationen und minimieren Verformung beim Vorschub. Der Spitzenwinkel 118° erleichtert das Anbohren und sorgt für gute Zentrierung bei vielen Metallen; bei sehr harten Werkstoffen kann ein größerer Winkel vorteilhaft sein. Für saubere Ergebnisse empfiehlt sich passende Drehzahl, regelmäßige Kühlung oder Schmierung und ordentliche Spannmittel am Bohrfutter. Für präzise Metallbohrungen empfehlen wir den MetavCUT Spiralbohrer in Kurz-Ausführung; bei Unsicherheit oder für technische Rückfragen steht METAV Werkzeuge per E‑Mail unter info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 zur Verfügung Technische Daten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40082-FDA Durchmesser: 8,2 mm Material: HSS Norm: DIN 338 Typ: Typ N Ausführung: kurz Farbe: schwarz Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 118° Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (HSS Spiralbohrer) ist grundsätzlich für viele Metalle geeignet; bei sehr hartem Edelstahl kann jedoch ein Bohrer mit größerem Spitzenwinkel oder spezieller Beschichtung vorteilhafter sein, um längere Standzeiten zu erreichen. Kann ich den MetavCUT Spiralbohrer in meiner Handbohrmaschine verwenden? Der MetavCUT Spiralbohrer (Kurz-Ausführung, Typ N) ist für den Einsatz an Handbohrmaschinen ausgelegt und eignet sich besonders für dünne bis mittlere Bleche sowie allgemeine Werkstattarbeiten. Welche Vorteile bietet die kurze Ausführung des Spiralbohrers von MetavCUT? Die kurze Bauform des MetavCUT Spiralbohrers reduziert das Auslenken und sorgt für erhöhte Stabilität und präzisere Bohrbilder, besonders bei stationären und handgeführten Anwendungen. Wie sollte ich den MetavCUT Spiralbohrer pflegen, um die Lebensdauer zu erhöhen? Für eine längere Standzeit des MetavCUT Spiralbohrers empfiehlt sich das Bohren mit geeigneter Drehzahl, Verwendung von Kühlmittel oder Schmierstoff bei Metallbearbeitung und regelmäßiges Nachschleifen oder Austausch bei Verschleiß. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40082-FDA","sku":"40082-FDA","mpn":"40082-FDA","name":"Spiralbohrer 40082-FDA","description":"Kurzer HSS Spiralbohrer nach DIN 338, Durchmesser 8,2 mm, Spitzenwinkel 118°, Typ N Normalspirale, schwarze Oberfläche; geeignet für Metallbohrungen mit Handbohrmaschine; Spirallänge 75 mm, Gesamtlänge 117 mm; robust und stabil für Werkstatt und Montage.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,2 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (HSS Spiralbohrer) ist für viele Metalle geeignet; bei sehr hartem Edelstahl empfiehlt sich jedoch ein Bohrer mit größerem Spitzenwinkel oder spezieller Beschichtung für längere Standzeiten."}},{"@type":"Question","name":"Kann ich den MetavCUT Spiralbohrer in einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer (Kurz-Ausführung, Typ N) ist für den Einsatz an Handbohrmaschinen ausgelegt und eignet sich besonders für dünne bis mittlere Bleche sowie allgemeine Werkstattarbeiten."}},{"@type":"Question","name":"Welche Vorteile bietet die kurze Ausführung des MetavCUT Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Die kurze Bauform des MetavCUT Spiralbohrers reduziert die Auslenkung, erhöht die Stabilität und sorgt für präzisere Bohrbilder, besonders bei handgeführten Anwendungen."}},{"@type":"Question","name":"Welche Werkstoffe lassen sich mit dem MetavCUT Spiralbohrer bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer aus HSS eignet sich für legierte und unlegierte Stähle, Gusseisen, Nichteisenmetalle und Kunststoffe; HSS bietet gute Schnittfestigkeit und thermische Beständigkeit."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/40082-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer nach DIN 338"},{"@type":"Thing","name":"HSS für Metallbearbeitung"},{"@type":"Thing","name":"Kurz-Ausführung für erhöhte Stabilität"}],"mentions":[{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Spirallänge 75 mm"},{"@type":"Thing","name":"Spitzenwinkel 118°"}]}]}

Twist Drill — Type N short, 8.2 mm, 135° tip, 5% cobalt-alloyed, HSS‑E, DIN 338 (MetavCUT) A Twist Drill Type N short designed for precision metal drilling with Drilling Machines, offering enhanced stability and wear resistance for demanding workshop tasks. Short design for higher stability 5% cobalt-alloyed HSS‑E for heat resistance 8.2 mm diameter with 135° tip for hard metals Fully ground shank for accurate runout Conforms to DIN 338 for standardised quality Stable drilling in hard materials that reduces vibration and breakage The short design of this drill gives a reduced overhang and therefore higher stability during machining. With an 8.2 mm diameter and a spiral length of 75 mm, the geometry minimises bending forces when used in a Hand Drill or on stationary Drilling Machines. For operations in tougher materials the compact length helps to keep the tool steady, which reduces chatter and the risk of sudden breakage while improving hole accuracy and surface finish. Material choice and cutting geometry for longer tool life Made from HSS‑E and alloyed with 5% cobalt, the drill maintains cutting hardness and heat resistance at elevated temperatures. The 135° tip angle is optimised for penetrating hardened and stainless steels, shortening the initial piercing time and improving centring in the workpiece. The combination of material and geometry makes the tool suitable for alloys and cast iron while preserving cutting edges when proper cooling is applied. Precision manufacture: grinding, runout and compliance This item is produced as a fully ground (HSS‑G) short Twist Drill rather than roll‑formed, which results in very sharp cutting lips and high concentricity. The ground flutes and accurately ground shank improve runout and produce clean bore surfaces, especially important when drilling small diameters in metal. Conformity to DIN 338 ensures the dimensions and tolerances meet recognised standards for short cylindrical shank drills. Who benefits most: applications and working tips Engineers, toolroom technicians and advanced hobbyists working with metal will value the performance of this short Type N drill for precise tasks and for drilling up to depths compatible with a 75 mm spiral length. Use moderate speeds, appropriate cutting fluid and a steady feed to exploit the cobalt alloy’s heat resistance. If drilling non‑ferrous materials or wood, expect less guidance than with specialised wood drills; however the tool can still be used with care for multi‑purpose tasks. We recommend the MetavCUT Twist Drill Type N short for precision metalworking; for individual advice on feeds, speeds or tool selection contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 47082-FDA Diameter: 8.2 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Type: Type N Execution: short Shank execution: fully ground Material: HSS‑E Colour / Alloy: 5% cobalt‑alloyed Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill and where does it perform best? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength metals and for larger hole diameters in metalworking; its short design improves stability and precision when drilling steels, castings and non‑ferrous alloys. Which three drill types exist and how does this product fit in? There are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill group and is engineered for use in metalworking applications. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑edge at the tip of a Twist Drill, which lowers friction and the necessary feed force; this also improves centring so the tip starts the hole more accurately in the workpiece. Can a metal Twist Drill be used to drill wood? A Metal drill can be used in Wood, but the guidance is generally poorer and the hole finish may not be as clean; however metal drills are easier to resharpen and tend to have a lower self‑feeding tendency compared to specialised wood bits. For which hole depths is the Twist Drill most commonly used? A full bore into solid material is typically made with a Twist Drill; for diameters up to about 20 mm and drilling depths to around 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are always superior to standard HSS is not universally correct; selection should be based on working conditions and whether the additional cost of HSSE is justified for your specific application.

Twist Drill — Type N short, 8.2 mm, 135°, HSS‑G, Bright Finished, Fully Ground Shank, DIN 338 The Twist Drill Type N short is a precision metal‑drilling tool for Drilling Machines, offering an 8.2 mm diameter and a 135° tip for reliable penetration in hard materials. Twist Drill Type N, 8.2 mm, 135° tip Short design for higher stability and precision HSS‑G ground for fast drilling and clean holes Sized to machine drilling in metals per DIN 338 Bright finished with fully ground shank Short design increases accuracy and reduces vibration A shorter overall length combined with a reduced overhang provides noticeably higher stability during machining, which is particularly advantageous when working on tough alloys. The compact geometry lowers the tendency to bend or chatter, so operators achieve more consistent hole quality under load. For workshop set‑ups where rigidity matters, the short execution of this tool supports precise centring and smoother feeds. HSS‑G ground geometry for faster, cleaner holes in metal The HSS‑G (ground high‑speed steel) construction yields very sharp cutting edges and excellent roundness, enabling up to 40% faster drilling speeds with significantly reduced feed forces compared with conventional HSS. Combined with the 135° tip geometry, the tool is optimised for harder materials and reduces the risk of workpiece deformation while improving tool life when used with appropriate coolant. Fully ground shank and bright finish for reliable clamping A fully ground cylindrical shank ensures uniform clamping in chucks and holders, minimising run‑out and enhancing concentricity for deeper or repeated bores. The bright finished surface facilitates chip evacuation and inspection, while the compliance with DIN 338 confirms the tool class and dimensional tolerances expected in professional metalworking environments. Best suited for professional metalworking and demanding tasks Engineers and machinists who require robust performance in steel, castings and non‑ferrous metals will appreciate the balance of durability and precision offered by this Type N Twist Drill. The tool is designed primarily for machine drilling operations and excels where repeatable accuracy and clean bore edges are required, for example in toolrooms, maintenance shops and production lines. Choose the MetavCUT Twist Drill Type N short with HSS‑G grind for demanding metal applications — for expert advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45082-FDA Diameter: 8.2 mm Tip angle: 135° Type: Type N Material: HSS-G Execution: short Spiral length: 75 mm Total length: 117 mm Shank finish: fully ground Colour / Finish: bright finished Application: Drills for metal Model series: Standard Line Standard: DIN 338 Shaft execution: geschliffen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications is the Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking operations; it is particularly effective when machining steels, cast irons and other harder materials on Drilling Machines, offering stable performance for precision bores. Can the Twist Drill be used in portable drills? While the Twist Drill Type N is designed for machine drilling, it can be used in Handheld Drilling Machines for lighter tasks; however the short geometry shows its full advantages in rigid, machine‑mounted setups to maintain concentricity and hole quality. For what is Twist Drill used? The Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters. This shape is easy to regrind and withstands higher loads. Which 3 drill types exist? There are three principal drill types: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills pointed (regrinded)? Pointing reduces the web thickness at the tip of the Twist Drill. By pointing, frictional forces are substantially lowered so that smaller feed forces are required and the tip centres better in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood but typically gives poorer guidance and a less clean result. However, such drills are easier to resharpen and exhibit less aggressive self‑feeding.

Twist Drill – Short HSS‑G, Ø 8.2 mm, 135° (Type N), Bright Finished The Twist Drill is a short Type N HSS‑G drill designed for precision metalworking with Drilling Machines such as hand and stationary units, ideal where stability and clean holes are required. Short design for higher stability and precision HSS‑G fully ground for sharp, accurate holes 135° tip for hard materials like stainless steel Suitable for Drilling Machines and stationary use Conforms to DIN 338 for short twist drills High performance for demanding metal drilling Short HSS‑G geometry delivers a direct performance advantage: the short design reduces overhang and therefore deflection, improving hole accuracy under load. The fully ground cutting geometry enables up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS cutters, which is especially beneficial when working with alloyed and unalloyed Steel, Cast Iron, Sintered Iron or Hard Plastics. The 135° tip reduces walking on hard surfaces and shortens plunge time, so production cycles become more efficient while maintaining repeatable results. Precision manufacturing and what “fully ground” means for you A fully ground or HSS‑G tool is produced by CNC grinding rather than roll forming. This process yields very sharp cutting edges and high concentricity, leading to clean, precise bores and excellent roundness. Such advantages suit precision drillwork but also call for appropriate handling: ground drills can be more brittle than rolled types, so cooling and controlled feed are advised to prevent breakage and extend tool life. Compliance with DIN 338 ensures the drill matches the expected dimensions and tolerances for short twist drills with cylidrical shanks. Who benefits and where to use it Workshops, metal fabricators and maintenance engineers profit most from this short drill: it is tailored for operations requiring accurate holes in hard materials and where machine stability is limited. With a spiral length of 75 mm and an overall length of 117 mm combined with a Ø 8.2 mm core, the tool is particularly suited to drilling in confined setups or on compact Drilling Machines, where reduced overhang improves process reliability. The Type N normal spiral is the classic choice for metal applications, giving robust chip evacuation and general-purpose versatility. Practical handling tips for longer tool life To get the best from this Profi Line HSS‑G twist drill, use moderate cutting speeds for stainless and hard steels and ensure adequate coolant or lubrication during operation. Short drills tolerate higher feeds thanks to reduced bending moments, but avoid heavy side loads. If re‑sharpening is required, maintain the original 135° tip geometry to preserve centring behaviour and reduce thrust. Regular inspection for wear at the margin and lip relief keeps hole quality consistent and reduces scrap. Strong recommendation: Choose MetavCUT Profi Line short HSS‑G Twist Drills for precision metalworking and contact METAV Werkzeuge for tailored technical advice and application support — Email: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48082-FDA Type: Type N Diameter: 8.2 mm Point angle: 135° Material: HSS‑G Execution: Short Finish/Colour: Bright finished Shank finish: Fully ground Spiral length: 75 mm Overall length: 117 mm For Drilling Machine: Drilling Machine (Hand Drilling Machine) Norm: DIN 338 Model series: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The Twist Drill from MetavCUT (Type N) is mainly applied for machining high‑strength materials and larger drill diameters; its geometry and grinding make it suitable for demanding metalwork where clean, precise holes are required and where the tool must withstand higher loads. Which 3 drill types exist? Common basic categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill family and is optimized for metal applications. Why are twist drills pointed? The point grind on a MetavCUT Type N Twist Drill reduces the cross‑cut at the tip, which lowers friction so that less thrust is needed; additionally, a correctly ground tip improves centring and reduces walking on the workpiece. Can the Twist Drill be used for wood? A metal drill such as the MetavCUT Type N Twist Drill can be used in wood, but guidance and finish are usually inferior to dedicated wood drills; metal drills are easier to re‑sharpen and have lower self‑feeding tendency, yet they may not give as clean a hole as a wood‑specific bit.