High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
8.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G Metal Drill, Ø 8.5 mm, 135° The Twist Drill (Type N) is a short, bright‑finished HSS‑G drill designed for precision metalworking in drilling machines and hand drills. Short design for high stability and precision HSS‑G ground tip for clean, accurate holes 135° tip angle optimised for hard materials Fully ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Precision and faster penetration in hard metals The Profi Line short Twist Drill brings measurable efficiency to metalworking: the HSS‑G ground geometry reduces required feed force and enables up to 40% faster drilling compared with conventional HSS types. With a 135° tip angle, the drill enters hard materials more smoothly and reduces wandering on the surface, so one clean, centred hole is achieved with less rework. This results in time savings and improved process reliability for daily workshop tasks. Greater stability and reduced deflection during drilling A reduced overall projection improves stiffness: the short execution (total length 117 mm, spiral length 75 mm) minimises bending and vibration when compared with longer drills. The shorter overhang leads directly to better hole accuracy and longer tool life in many setups. The fully ground shank ensures reliable clamping and concentricity in standard drill chucks and machine spindles, lowering runout and improving surface quality of the bore. Designed for a wide range of metalworking applications This Twist Drill (Type N) is tailored for demanding tasks: ideal for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The normal spiral geometry of Type N provides a balanced chip evacuation and cutting action suited to general metal drilling. Use in stationary drilling machines or appropriately rated hand drills delivers consistent results when standard cooling and speeds for the material are observed. Manufacturing standard, sharpening and recommended handling Manufactured to DIN 338, the drill is produced with CNC grinding of the flute geometry (HSS‑G), which gives very sharp cutting edges and a high degree of concentricity. Ground drills can be more brittle than rolled variants; therefore, application with coolant and controlled feeds is recommended to avoid breakage. For maintenance, regrind the lip and chisel edge respecting the original 135° tip to retain centring performance and chip formation characteristics. Who benefits from this Profi Line Twist Drill Workshop professionals and maintenance technicians who require fast, precise holes in tough materials will value the combination of short design and ground HSS quality. The tool is particularly useful where repeatable accuracy and reduced setup time matter, for example in toolrooms, small series production or repair work. METAVCUT’s specification focuses on dependable performance for metalworking environments. Strong recommendation: choose the MetavCUT Profi Line Twist Drill for precision metal drilling — for expert technical advice contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48085-FDA Diameter: 8.5 mm Tip angle: 135° Type: Type N Material: HSS‑G (ground high speed steel) Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Colour: bright finished Intended for: Drilling Machine / Hand Drill Norm: DIN 338 Model series: Profi Line Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Profi Line Twist Drill mainly used for? The MetavCUT Profi Line Twist Drill (Type N) is primarily used for drilling into high‑strength and hard metals; it performs especially well in alloyed and unalloyed steel, cast iron and similar materials where a durable, accurate hole is required. Can the MetavCUT Profi Line Twist Drill be used in a hand drill? Yes, the MetavCUT Profi Line Twist Drill can be used in suitably rated hand drills as well as in stationary drilling machines, provided the chuck secures the fully ground shank correctly and recommended speeds and cooling are applied. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength workpieces and larger drill diameters. This shape is easy to sharpen and withstands higher loads. Which three drill types exist? There are three primary drill categories: Metal Drill, Wood Drill, and Stone/Concrete Drill. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction so that less feed force is needed and the tip centres more reliably in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance is poorer and the finish is less clean; however, these drills are easier to re‑sharpen and have lower self‑feed tendency. At which drilling depths is the Twist Drill the most used tool? A through‑hole in solid material is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The widespread belief that HSSE is always superior to HSS is not universally true. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for your application.
8.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill Basic Line — Twist Drill, 8.5 mm, 118° tip, Short, TIN-coated, HSS-G, DIN 338 The Twist Drill Basic Line is a short HSS-G twist drill for Drilling Machine use, optimised for precise metalworking. Short design for increased stability and accuracy TIN-coated surface for reduced wear and longer life Fully ground shank for superior concentricity Conforms to DIN 338 for short cylinder-shank drills Precision and durability for metalworking tasks The Twist Drill Basic Line combines a short design with HSS-G material to deliver greater stability when drilling metal. The reduced overhang lowers the risk of bending, so holes are truer and repeatability improves. This results in more accurate component assembly and fewer rejects in production. The TIN-coated finish diminishes friction and enhances surface hardness, extending tool life under cyclic loads and when used with appropriate cooling. Faster drilling with lower feed forces Thanks to the fully ground geometry and optimised flute design, this short twist drill requires noticeably less axial force during cutting. Users benefit from up to 40% faster penetration in many ferrous materials compared with conventional HSS options, while feed effort is reduced by roughly 50%, making manual drilling on a Drilling Machine easier and more controlled. The 118° tip angle aids centring on semi-soft materials while maintaining good chip evacuation in metalworking. Designed for demanding metal applications Engineered in accordance with DIN 338, this short twist drill is suitable for alloyed and unalloyed steel, cast iron, sintered iron, copper, bronze, and hard plastics. The short spiral length improves stability for hard materials and larger diameters, making it a practical choice for workshop and industrial settings. Use with coolant is recommended to maximise life and maintain cutting performance, particularly when machining tough or heat-sensitive alloys. Who benefits and how to integrate it into workflows Workshops and maintenance departments that prioritise precision and repeatability will appreciate the Basic Line short twist drills. The 8.5 mm diameter and 117 mm overall length (with a 75 mm spiral length) fit many standard setups and can be used in portable Drilling Machines as well as stationary machines. For best results, clamp workpieces securely, apply suitable cutting fluid, and select appropriate spindle speed for the material being drilled. MetavCUT recommends the Twist Drill Basic Line for precise metal drilling; for tailored technical advice or to confirm suitability for specific materials and thicknesses, contact METAV Werkzeuge – comprehensive consulting is available via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Basic Line (short) Brand: MetavCUT SKU: 28085-FDA Diameter: 8.5 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 118° Material: HSS-G (ground High Speed Steel) Shank: Fully ground (geschliffen) Coating/Colour: TIN-coated (Titanium Nitride) Intended machine: Drilling Machine (Handbohrmaschine compatible) Standard: DIN 338 Application: Drills for metal / Bohrer für Metall Execution: Short (kurz) Model series: Basic Line Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Basic Line best used for and which materials suit it? The Twist Drill Basic Line from MetavCUT is optimised for drilling metal; it performs well in alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Copper, Bronze and Hard Plastics when used on a Drilling Machine and preferably with coolant to reduce wear. Can the MetavCUT Twist Drill Basic Line be used in handheld drills? Yes, the MetavCUT Twist Drill Basic Line can be used in compatible Hand Drilling Machines, but its short design and ground geometry are particularly beneficial in stable setups or where rigidity and precision are required. What are Twist Drills used for? Twist Drills are primarily applied to the machining of high-strength materials and larger drill diameters; their form is easy to resharpen and withstands higher loads, making them suitable for demanding metalworking tasks. Which 3 drill types exist? There are three main drill categories: Metal drills, Wood drills, Stone/Concrete drills.
8.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Kombinieren Sie Präzision und Wirtschaftlichkeit: Der kurze HSS-G Spiralbohrer mit TIN-beschichtung liefert stabile Bohrbilder in Stahl und Nichteisenmetallen und reduziert Verschleiß durch geschliffene Geometrie; Bestellungen und fachliche Beratung direkt über Metav aus Emmerich verfügbar. Spiralbohrer kurz, geschliffen, TIN-beschichtet Der Spiralbohrer ist ein kurzer HSS-G Bohrer für das Bohren in Metall mit optimierter Stabilität und hoher Standzeit bei Handbohrmaschine und stationären Maschinen. Kurze Ausführung für erhöhte Stabilität TIN-beschichtet für geringeren Verschleiß Geschliffene Geometrie für saubere Bohrlöcher Spitzenwinkel 135° für harte Werkstoffe DIN 338 konforme kurze Spiralbohrer Höhere Standzeit durch Materialwahl und Beschichtung Dank HSS-G (Schnellarbeitsstahl, geschliffen) und der TIN-Beschichtung (Titan-Nitrid) reduziert dieser Bohrer Reibung und Wärmeeintrag beim Bohren von Metall. Die Kombination führt zu einer verlängerten Lebensdauer und weniger Nachschleifen, was insbesondere bei häufigen Bohrvorgängen Zeit und Kosten spart. Die geschliffene Ausführung sorgt für eine sehr scharfe Schneide und einen sauberen Spanfluss. Präzision und Stabilität bei kurzen Auskraglängen Die kurze Gesamtlänge und die reduzierte Auskraglänge erhöhen die Steifigkeit der Bohrung und minimieren das Kippmoment, was zu präziseren Bohrungen führt. Für Anwender bedeutet das weniger Nacharbeit und höhere Maßhaltigkeit bei Passungen. Besonders bei harten Werkstoffen wie legiertem Stahl oder Temperguss entfaltet die Konstruktion ihre Vorteile, da die Kraftübertragung stabil und kontrolliert erfolgt. Einsatzbereiche und Maschinenkompatibilität Der Bohrer eignet sich für allgemeine Metallbearbeitung und Reparaturarbeiten sowohl in der Werkstatt als auch auf der Baustelle. Die Ausführung ist für Handbohrmaschine und stationäre Bohrmaschinen geeignet; typischer Einsatz sind Bleche, Profile, Guss- und Sinterteile sowie Nichteisenmetalle wie Kupfer und Bronze. Aufgrund der Normierung nach DIN 338 entspricht der Bohrer gängigen Industriestandards für kurze Spiralbohrer. Verarbeitungshinweise für optimale Ergebnisse Bei Bearbeitung von harten Werkstoffen empfiehlt sich ein leicht reduzierter Vorschub und die Nutzung von Kühlschmierstoff, um Wärmeaufbau zu minimieren und die Standzeit weiter zu erhöhen. Vorbohren bei großen Durchmessern bzw. progressive Aufbohrungen vermeiden die Überlastung der Schneide. Die geschliffene Zerspanungsgeometrie verlangt eine ruhige, ruckfreie Führung; bei stationärem Einsatz erhöhen Kühlung und geeignete Schnittgeschwindigkeit die Effektivität weiter. Bestellen Sie den HSS-G Spiralbohrer von MetavCUT über Metav für präzise Metallbohrungen; fachliche Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 verfügbar Produktmerkmale Artikelnummer: 46085-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Ausführung: kurz Fakten Durchmesser: 8,5 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaft: geschliffen Typ: Typ N (Normalspirale) Norm: DIN 338 (kurze Spiralbohrer) Beschichtung: TIN-beschichtet (Titan-Nitrid-Beschichtung) Für Maschine: Handbohrmaschine FAQ Für welche Werkstoffe ist dieser Spiralbohrer geeignet? Der Spiralbohrer von MetavCUT (SKU 46085-FDA) eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze und Hartkunststoff. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung des HSS-G Spiralbohrers wurde für den Einsatz mit Handbohrmaschine und stationären Maschinen entwickelt und bietet durch die reduzierte Auskraglänge erhöhte Stabilität. Welche Vorteile bietet die TIN-Beschichtung konkret? Die TIN-beschichtung (Titan-Nitrid) auf dem Spiralbohrer verringert Reibung und Verschleiß, erhöht die Standzeit und ermöglicht höhere Schnittgeschwindigkeiten bei gleichbleibender Präzision. Wann ist der Spitzenwinkel 135° sinnvoll? Der Spitzenwinkel 135° ist besonders bei harten Werkstoffen wie Edelstahl und gehärtetem Stahl zu empfehlen, weil er das Eindringen erleichtert und die Lebensdauer der Schneide verbessert. Entspricht der Bohrer einer Norm und welche Bedeutung hat das? Der Bohrer entspricht DIN 338, was bedeutet, dass es sich um einen standardisierten kurzen Spiralbohrer handelt; Nutzer profitieren von austauschbaren Abmessungen und verlässlicher Maßhaltigkeit.
8.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Der Spiralbohrer überzeugt durch die Kombination aus hoher Präzision und verschleißreduzierender TiN-Beschichtung; ideal für stationäre und handgeführte Anwendungen. Bestellen Sie direkt bei Metav oder lassen Sie sich von unserer technischen Beratung unterstützen. Spiralbohrer – HSS-G Kurzbohrer, MetavCUT Profi Line Der Spiralbohrer von MetavCUT ist ein kurz ausgeführter HSS-G Bohrer mit TiN-Beschichtung für präzises Bohren in Stahl und Nichteisenmetallen. Kurze Ausführung für höhere Stabilität TiN-Beschichtung reduziert Verschleiß Geschliffene Geometrie für saubere Bohrlöcher Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Mehr Stabilität für anspruchsvolle Metallbearbeitung Dank der kurzen Ausführung reduziert sich die Auskraglänge, was die Stabilität deutlich erhöht. Diese Bauform minimiert Vibrationen und Neigung zum Verbiegen, sodass sich die Kräfte sauber in das Werkstück übertragen lassen. Die Kombination aus HSS-G und geschliffener Schaftgeometrie sorgt für eine höhere Rundlaufgenauigkeit, was besonders bei Bohrungen in legierten und unlegierten Stahl zu präzisen Ergebnissen führt. Ein Vorteil für Anwender, die saubere Passungen und wiederholbare Toleranzen benötigen. Effizienteres Arbeiten durch Oberflächen- und Geometrieoptimierung Die TiN-Beschichtung verringert die Reibung an der Schneide und senkt damit die Wärmeentwicklung bei Metallbohrungen. Dadurch verlängert sich die Lebensdauer des Werkzeugs und die Standzeit steigt signifikant. Zusätzlich ermöglicht der geschliffene Spanwinkel ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft verglichen mit konventionellen HSS-Varianten. Das Ergebnis ist ein effizienterer Fertigungsablauf mit weniger Werkzeugwechseln und höherer Produktivität. Zielgerichtete Anwendung und Materialvielfalt Dieser Bohrer ist speziell ausgelegt für das Bohren in legiertem und unlegiertem Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetallen wie Kupfer, Bronze und Neusilber. Auch Hartkunststoffe lassen sich zuverlässig bearbeiten. Die Spitzenwinkel 135° sind optimal auf härtere Werkstoffe abgestimmt und reduzieren das Einkerben beim Anbohren. Somit eignet sich das Werkzeug für Werkstätten, Instandhaltung und Serienfertigung, die auf robuste und wiederholbare Bohrqualität angewiesen sind. Verarbeitung, Norm und Fertigungsart erklärt Der Bohrer entspricht der DIN 338, die kurze Spiralbohrer mit Zylinderschaft klassifiziert. Die geschliffene Ausführung (HSS-G) entsteht durch CNC-Schliff, wodurch sehr scharfe Kanten und eine hohe Rundlaufgenauigkeit erzielt werden. Solche Bohrer liefern saubere Bohrbilder, sind jedoch empfindlicher gegenüber Krafteinleitungen; deshalb empfiehlt sich der Einsatz an stationären Maschinen oder mit einer geeigneten Spannvorrichtung. Bei Handgebrauch bitte auf exakte Führung und angemessene Kühlung achten. Empfehlung: Die MetavCUT Profi Line HSS-G TiN-beschichteten Spiralbohrer nutzen, um präzise und langlebige Bohrungen in Stahl und Nichteisenmetallen zu erzielen — Anfragen und Bestellungen über Metav, E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 41085-FDA Hersteller: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Daten Durchmesser: 8,5 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Beschichtung: TIN-beschichtet (Titan‑Nitrid, verschleißmindernd) Ausführung: kurz Schaftausführung: geschliffen Typ: Typ N (Normalspirale) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Für Bohrmaschine: Handbohrmaschine Modellserie: Profi Line SKU: 41085-FDA FAQ Für welche Werkstoffe eignet sich dieser Bohrer am besten? Der MetavCUT Profi Line Spiralbohrer mit HSS-G und TiN-Beschichtung ist ausgelegt für legierten und unlegierten Stahl, Gusswerkstoffe, Sintereisen sowie Nichteisenmetalle und Hartkunststoffe. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Bohrer ist für den Einsatz an einer Handbohrmaschine geeignet, empfiehlt sich jedoch besonders bei präzisen Einsätzen mit fester Führung oder an stationären Maschinen. Warum ist die geschliffene Ausführung wichtig? Die geschliffene Fertigung sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; die MetavCUT Profi Line HSS-G Ausführung liefert dadurch konstante Bohrergebnisse. Welchen Vorteil bietet die TiN‑Beschichtung? Die TiN‑Beschichtung reduziert Reibung und Verschleiß, erhöht die Standzeit und verbessert das Bohrverhalten bei Metallbearbeitung, wie es der MetavCUT Spiralbohrer demonstriert. Ist ein Spitzenwinkel von 135° für Edelstahl geeignet? Ja, ein Spitzenwinkel von 135° ist vorteilhaft für härtere Werkstoffe wie Edelstahl, weil er das Anbohren erleichtert und das Einlaufen in das Werkstück kontrollierter gestaltet.
8.5mm HSS-G Twist Drill DIN 338 - MetavCUT
MetavCUT Twist Drill HSS‑G 8.5 mm (Twist Drill, DIN 338, 135°) The Twist Drill HSS‑G 8.5 mm is a precision metalworking drill designed for use with Hand and Stationary Drilling Machines, optimised for rapid, burr‑free holes in steel, cast iron and non‑ferrous materials. HSS‑G Material for high wear resistance 135° Tip for cleaner entry in hard materials Triangular shank for secure grip in Drilling Machines Conforms to DIN 338 short twist drill standard Rapid‑ground geometry reduces feed force and drilling time Faster metal drilling with less operator effort and consistent results The specially ground HSS‑G construction of this Twist Drill translates into tangible productivity: up to 40% faster drilling and approximately 50% less feed force compared with conventional HSS drills, as achieved by the optimized cutting geometry. This means shorter cycle times on production tasks and less physical strain during repetitive work. The 135° tip angle is tailored for harder materials, improving centring and reducing walking at the start of the hole to deliver neat, burr‑reduced results. Reliable performance across a wide range of engineering materials Designed for machining alloyed and unalloyed steels, cast and sintered irons, non‑ferrous metals, aluminium and hard plastics, the Twist Drill offers versatility for everyday workshop and industrial applications. The rapid ground point ensures clean hole edges and steady chip evacuation, which is particularly beneficial when working with tougher materials or when achieving a high surface quality of the bore is required. Secure clamping and compatibility with cordless and bench units The triangular shank (3‑flat shank) provides a positive drive in chucks and quick‑change holders, making the drill ideal for efficient use with cordless screwdrivers as well as conventional Drilling Machines. The overall length and flute geometry are matched to the DIN 338 classification for short twist drills, so users can expect consistent handling characteristics and straightforward integration into existing tool assortments. Practical advantages for professional workshops and assemblers Because the point geometry reduces required thrust, tool life can be extended and the risk of drill breakage diminished during deep or repetitive holes. The combination of rapid‑ground tip and HSS‑G material also simplifies regrinding for maintenance, giving workshops a cost‑efficient balance between performance and serviceability. For operators seeking both speed and longevity in metal drilling, this drill delivers measurable benefits. Expert support and technical consultation when needed If it is unclear whether this Twist Drill meets specific application demands or if additional technical data is required, METAV Werkzeuge offers comprehensive and competent consultation. Experienced advisers can help with material‑specific recommendations, suitable drilling speeds and feeds, or selection of complementary tooling to optimise your production process. Contact METAV Werkzeuge for tailored support by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 We recommend the MetavCUT Twist Drill HSS‑G for demanding metalworking applications — for personalised advice and application support please contact METAV Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Twist Drill (Twist Drill) Marke: MetavCUT SKU: 55085-FDA Diameter: 8.5 mm Material: HSS‑G Tip Angle: 135° Overall Length: 117 mm Spiral Length: 75 mm Shaft Execution: with multi‑bevel cutting edge and triangular shank Application: Drills for metal Standard: DIN 338 Series: Spezial (Special) Suitable For: Handbohrmaschine / Drilling Machine Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and where does the MetavCUT Twist Drill perform best? The MetavCUT Twist Drill is primarily used for drilling in high‑strength materials and larger diameters; it is especially suited to alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. Its design allows easy regrinding and it withstands higher mechanical loads while delivering clean starts and burr‑reduced holes. Which three drill types exist and how does the MetavCUT Twist Drill relate to them? The three common drill types are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drill category and is optimised for use in metalworking applications rather than woodworking or masonry.
8.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Hohe Präzision durch HSS‑G und CNC‑geschliffene Geometrie, kombiniert mit der langen Ausführung (DIN 340) und dem 135° Spitzenwinkel, ermöglicht tiefe, saubere Bohrungen in Stahl und Guss. Bestellen Sie den Bohrer direkt über METAV Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 8,5 mm – MetavCUT Standard Line Der Spiralbohrer von MetavCUT ist eine lange, geschliffene Ausführung für präzise Tiefbohrungen in legierten und unlegierten Metallen. Spiralbohrer »53085-FDA« von MetavCUT Standard Line HSS‑G geschliffen für hohe Präzision DIN 340 lange Ausführung für tiefe Löcher Spirallänge 109 mm für bessere Spanabfuhr Spitzenwinkel 135° für harte Werkstoffe Höhere Effizienz durch geschliffene HSS‑Geometrie Die HSS‑G Ausführung mit CNC‑Schliff liefert scharfe Schneidenkanten und hohen Rundlauf, was sich direkt in sauberere Bohrlöcher und reduzierten Nacharbeitbedarf übersetzt. Durch den geschliffenen Aufbau sind Anbohrung und Vorschub leichter, was laut Herstelleraussage bis zu 40 % schnelleres Bohren und etwa 50 % geringere Anpresskraft gegenüber herkömmlichen HSS‑Bohrern erlaubt. Das bedeutet weniger Verschleiß an Maschine und Werkzeug sowie kürzere Taktzeiten in der Werkstatt. Passend für Standard‑Einsätze in Werkstatt und Montage Mit einem Durchmesser von 8,5 mm liegt der Bohrer im Standard‑Bereich (2,0 mm–13,0 mm) und eignet sich damit für typische Werkstattaufgaben: Bohren in Baustahl, Aluminium, Kunststoffe sowie dünnere Profile und Bleche. Die lange Spirallänge macht den Bohrer besonders geeignet für schwer zugängliche Bohrstellen und tiefe Bohrungen, wobei für hohe Genauigkeit ein Anpunkten mit Zentrierbohrer empfohlen wird. Die Geometrie erlaubt den Einsatz an Handbohrmaschinen ebenso wie an stationären Säulenmaschinen. Einsatzhinweise, Kühlung und Werkstoffempfehlung Die lange Ausführung nach DIN 340 bietet Vorteile bei tieferen Bohrungen, verlangt aber eine angepasste Arbeitsweise: Kühlung bei Stahl und Guss sowie moderate Schnittgeschwindigkeit vermeiden Überhitzung und Bruchgefahr. Der Spitzenwinkel von 135° ist ausgelegt für härtere Werkstoffe; für sehr dünnwandige oder filigrane Bauteile sind alternative Verfahren zu prüfen. Für legierte und unlegierte Stähle bis etwa 900 N/mm² liefert die Kombination aus Material und Schliff zuverlässige Ergebnisse. Für präzise Tiefbohrungen empfehlen wir den HSS‑G geschliffenen Spiralbohrer von MetavCUT; bei Fragen technischen Umfangs oder zur Einsatzabstimmung steht METAV Werkzeuge per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 zur Verfügung Leistungsmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 53085-FDA Marke: MetavCUT Serie: Standard Line Ausführung: lang Norm: DIN 340 Daten: Durchmesser: 8,5 mm Gesamtlänge: 165 mm Spirallänge: 109 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 Ausführung EN: long FAQ Wie tief kann mit dem MetavCUT Spiralbohrer gebohrt werden? Die lange Ausführung des MetavCUT Spiralbohrers (SKU 53085-FDA) erlaubt tiefere Bohrungen als Standardbohrer; Maßgeblich sind jedoch Bohrmaschinensteifigkeit und Kühlung, daher empfiehlt METAV Werkzeuge die Verwendung stationärer Maschinen für maximale Tiefen. Ist der Bohrer für Edelstahl geeignet? Der HSS‑G Spiralbohrer von MetavCUT ist für härtere Werkstoffe konzipiert; der 135° Spitzenwinkel verbessert das Eindringen in Edelstahl, bei höherer Härte sind reduzierte Schnittgeschwindigkeiten und Kühlung ratsam. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, der Spiralbohrer ist auch für Handbohrmaschinen geeignet, wobei bei tieferen Löchern oder hohen Vorschubkräften stationäre Aufnahme bevorzugt wird, um Rundlauf und Standzeit zu erhöhen. Welche Vorteile bietet der CNC‑Schliff gegenüber gewalzten Bohrern? Der geschliffene HSS‑G Bohrer von MetavCUT liefert schärfere Kanten und bessere Rundlaufgenauigkeit, was zu saubereren Bohrbildern und effizienter Spanabfuhr führt; das wirkt sich positiv auf Oberflächenqualität und Nachbearbeitung aus. In welchen Werkstoffen erzielt der Bohrer die besten Ergebnisse? Der MetavCUT Spiralbohrer 8,5 mm liefert besonders gute Ergebnisse in legierten und unlegierten Stählen, Gusseisen und Nichteisenmetallen; für sehr zähe oder gehärtete Materialien sollte geprüft werden, ob Vollhartmetall die wirtschaftlichere Wahl ist.
8.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, short HSS, Ø 8.6 mm, 118° tip, black, DIN 338 — MetavCUT The Twist Drill Type N short HSS is designed for precise metal drilling in hand and drilling machines, offering stability and clean starts for workshop and industrial use. Short HSS design for high stability Ø 8.6 mm for medium-diameter holes 118° tip for reliable centring on curved surfaces Type N normal spiral for metal drilling Conforms to DIN 338 for short twist drills Reliable HSS performance for demanding metalwork Manufactured from HSS (High Speed Steel), this Twist Drill targets the drilling of alloyed and unalloyed steel, cast iron and non‑ferrous Metals. The material choice provides a balanced combination of hardness and toughness, which supports sustained cutting performance under load. As a result, workshops benefit from consistent hole quality and extended tool life when processing common engineering materials. Short execution and Type N spiral for precision and stability The short design specified by DIN 338 reduces overhang and increases rigidity compared with longer variants, which minimises deflection and improves concentricity when drilling from chucks. The Type N normal spiral geometry is the classic solution for metal drilling, offering predictable chip evacuation and stable cutting behaviour in stationary and portable Drilling Machines. This leads to noticeably better guidance and fewer rejects in precision tasks. 118° tip for better centring and smoother starts A 118° tip provides a favourable compromise between easy centring and fast penetration for many common metals; the geometry supports accurate positioning even on slightly curved surfaces. Tip sharpening (outpointing) reduces the cross‑cutting edge width, which lowers friction and reduces necessary feed forces, improving centring and resulting hole finish. For operators this means quicker set‑up and fewer re‑drills while maintaining a clean bore. Practical advantages for workshops and maintenance teams The combination of HSS construction, short overall length and Type N spiral makes this Twist Drill particularly suitable for mechanical workshops, tool rooms and maintenance teams requiring reliable medium‑diameter holes. The geometry is also straightforward to resharpen, so machines with frequent use benefit from a tool that can be economically maintained. Its black finish improves visibility of wear and handling in busy production environments. Strong recommendation: Choose the MetavCUT Twist Drill Type N (Ø 8.6 mm, short HSS) for robust, precise metal drilling — for expert advice contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 40086-FDA Type: Type N Diameter: 8.6 mm Tip angle: 118° Spiral length: 81 mm Overall length: 125 mm Material: HSS Execution: short Colour: black Suitable for: Drilling Machine / Hand Drill Application: Drills for metal Norm: DIN 338 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N from MetavCUT used for? The MetavCUT Twist Drill Type N is primarily used for drilling in metal; its short HSS construction and normal spiral make it suitable for precise holes in Alloyed and Unalloyed Steel, Cast Iron and Non‑Ferrous Metals in both workshop and maintenance environments. Can the MetavCUT Twist Drill be used with a hand drill or drilling machine? Yes, the MetavCUT Twist Drill Type N is designed for use in Drilling Machines and can also be employed with Hand Drills, though the short execution particularly benefits stationary setups where rigidity and concentricity are crucial. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high‑strength materials and larger drill diameters; its form is easy to grind and it withstands elevated loads, making it suitable for robust metalworking tasks. Which three drill types exist? The three common drill types are: Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills sharpened (outpointed)? Sharpening reduces the cross‑cutting edge at the tip of the Twist Drill, which significantly lowers friction forces and thus requires less feed force; at the same time the tip centres better in the workpiece, improving accuracy. Can a metal Twist Drill be used to drill wood? A metal (HSS) Twist Drill can be used in wood but it generally provides poorer guidance and a less clean finish compared with dedicated wood drills; however, metal drills are easier to resharpen and show less self‑feeding behaviour.
8.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill – Short Twist Drill Type N, 8.6 mm, 135° Point Angle, 5% Cobalt‑Alloyed, Fully Ground, DIN 338, HSS‑E (MetavCUT) The Twist Drill is a short Type N drilling tool for precise metalworking in Drilling Machines, designed for high stability and clean bores in alloyed and unalloyed metals. Short HSS‑E Twist Drill for stable precision 8.6 mm Diameter with 135° Point Angle Fully ground shank for high runout accuracy Conforms to DIN 338 for short twist drills Higher Precision through Reduced Overhang for Consistent Holes Because of its short design the drill benefits from a reduced overhang, which significantly increases stability and reduces bending under load. This results in more consistent hole geometry and less vibration when working with tougher materials. For metalworkers who require repeatable results, the shorter flute length improves control and makes it easier to maintain concentricity even at higher spindle speeds. Material Composition and Grinding: Sharpness and Accuracy Manufactured from HSS‑E (High Speed Steel with 5% cobalt) and executed as fully ground, this twist drill delivers sharper Cutting Edges and excellent dimensional accuracy. The addition of cobalt increases hot hardness, improving wear resistance when drilling stainless or alloyed steels. Ground flutes offer superior Roundness and a cleaner finish compared with rolled alternatives, though users should consider appropriate cooling and tooling fixtures to mitigate fragility in highly loaded operations. Optimised Geometry for Harder Materials and Precise Entry The 135° Point Angle and Type N Normal Spiral geometry are selected to ease penetration into harder metals and to reduce Step‑in effects at the start of the hole. This geometry helps centre the tool and lowers the tendency to Skew on hard surfaces, making it suitable for stainless steel and tougher alloys encountered in workshop and industrial applications. Use of coolant and steady feeds will further extend tool life and hole quality. Suitable Uses and Target Users: Workshops and Professionals Engineered for use in Drilling Machines, this short twist drill is ideal for professional workshops, toolrooms and maintenance departments that prioritise accuracy over long reach. It is particularly effective when performing precision metal drilling tasks like mounting holes, component assembly, and repair work where straightness and roundness are critical. The product supports drilling in Alloyed Steel, Unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Plastics. Operational Tips and Durability Notes Adopt moderate spindle speeds and consistent coolant flow to exploit the 5% cobalt‑alloyed HSS‑E properties fully; this reduces the risk of thermal softening and tool wear. Because fully ground drills can be more brittle than rolled types, clamp the workpiece firmly and avoid excessive radial forces. For diameters below 6 mm the manufacturing process reduces breakage risk, but appropriate machine setup remains essential for long tool life. Strong recommendation: Choose the MetavCUT short HSS‑E Twist Drill for precise metal drilling — for technical questions or guidance METAV Werkzeuge provides expert support, contact info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill (Short, Type N, HSS‑E, 8.6 mm, 135°) Brand: MetavCUT SKU: 47086-FDA Diameter: 8.6 mm Point Angle: 135° Type: Type N Execution: Short Colour / Alloy: 5% cobalt-alloyed Shank Version: Fully ground Spiral Length: 81 mm Overall Length: 125 mm Application: Drills for Metal Material: HSS-E Standard: DIN 338 Suitable for Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill by MetavCUT (Type N)? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger bore diameters; its short form is easy to sharpen and endures higher loads, making it suitable for demanding metalworking tasks where durability and penetration into tough alloys are required. Which three drill types exist and how does the MetavCUT Twist Drill fit in? Generally, the main drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drill family and is optimised for metalworking with a Type N spiral and HSS‑E composition. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cutting edge at the point of the Twist Drill, lowering friction and therefore the necessary feed forces while improving centring of the tip in the workpiece for more accurate starts. Can a metal Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are generally inferior compared with dedicated Wood Drills; metal drills are easier to re‑grind and have less self‑pulling tendency.
8.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Spiralbohrer) — Ø 8.6 mm · 135° tip · Type N · Bright finished · Short · DIN 338 · HSS‑G · MetavCUT The Twist Drill is a short HSS‑G metal drill designed for precise drilling in hard materials on Drilling Machines. Short design for higher stability and precision Conforms to DIN 338 for short twist drills 135° tip optimised for hard materials Fully ground shank for high concentricity Up to 40% faster drilling with reduced feed force Deliver faster, cleaner holes with a short HSS‑G design The short Twist Drill construction reduces overhang and vibration, which directly improves stability and hole quality. Thanks to the HSS‑G (ground High Speed Steel) geometry, cutting edges are sharper and concentricity is higher than rolled alternatives, leading to more consistent hole diameters and less rework. The reduced tendency to wander makes this drill particularly effective when accuracy matters, for example when preparing holes for threaded fastenings in metal components. Precision at the tip: why 135° helps with hard materials A 135° tip angle increases the contact area at the point and reduces the initial penetration aggressiveness compared with steeper tips, which helps when drilling stainless steel, cast and alloyed steels or hard plastics. The Type N normal spiral is the classic metalworking geometry and provides reliable chip evacuation and centre guidance. In practice, this means fewer retries, reduced burr formation and a cleaner finish on the workpiece. Suitable machines and material range for consistent results This short Type N Twist Drill is intended for metalworking on rotating machines and is suitable for both stationary Drilling Machines and compatible portable setups when rigidity is ensured. It is recommended for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The fully ground shank ensures tight clamping and low runout, improving tool life and repeatability in production environments. Handling advice to maximise performance and tool life Ground HSS drills can be more brittle than rolled types; therefore, apply moderate feed and appropriate cutting fluid when machining metals to avoid premature breakage. Correct speed and steady feed are essential: slower speeds and continuous coolant are advised for harder alloys. For precise positioning, use a pilot or centre punch before drilling. If uncertain about speeds, feeds or machine setup, expert advice is available from METAV Werkzeuge to match operating conditions to material and hole requirements. Choose MetavCUT quality for precision metal drilling — for personalised technical advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 45086-FDA Diameter: 8.6 mm Tip Angle: 135° Type: Type N Execution: Short Finish/Colour: Bright finished Material: HSS‑G Spiral Length: 75 mm Overall Length: 117 mm Shank Finish: Fully ground Standard: DIN 338 Intended Use: Drills for metal For Machine: Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for drilling in hard and high‑strength materials; it is especially suited to metalworking tasks such as holes in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics, where precision and stability are required. Which three drill types exist? The three main drill categories are Metal drill, Wood drill and Stone/Concrete drill; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for machining metals. Why are twist drills pointed? The point geometry reduces the cross‑cut area at the tip, lowering friction and required feed forces; by sharpening (pointing) a Twist Drill the cutting forces decrease and the tip centres more reliably in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but the guidance is inferior and the hole finish is usually less clean compared with dedicated Wood drills; however, metal Twist Drills are easier to resharpen and show less self‑pulling action.
8.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G Twist Drill Ø 8.6 mm · 135° tip · Type N · Bright Finished · Fully Ground Shank · DIN 338 · MetavCUT Profi Line The Twist Drill short Type N is a precision drill for metalworking, designed for stable, accurate holes in hard and alloyed steels with its 135° tip. Short design for increased stability and precision HSS‑G ground for clean, accurate hole quality 135° tip optimised for hard and stainless steels Fully ground shank for excellent concentricity Complies with DIN 338 for short twist drills Greater Stability for Precise Metal Drilling This short Twist Drill delivers enhanced stability thanks to its reduced overhang and compact overall length. The short flute length reduces bending and vibration, which results in sharper, more concentric holes and longer tool life when used under appropriate conditions. For work on milling or drilling machines where rigidity matters, the compact design significantly improves repeatability and reduces the risk of wander in tough materials. Faster Cutting with Lower Feed Forces The specially ground HSS‑G geometry is engineered to cut more efficiently: the manufacturer reports up to 40% faster drilling and approximately 50% reduced feed force compared with conventional HSS variants. The 135° tip shortens initial bore time in harder metals and helps maintain the centre, while the ground cutting lips deliver a clean chip flow and reduced heat generation during operation. Built for Metalworking: Materials and Use Cases This Type N short twist drill is intended primarily for metal applications, including alloyed and unalloyed steels, cast steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its bright finished surface and fully ground shank make it particularly suitable for stationary and machine‑based drilling, where precision and surface quality of the hole are priorities. Typical users are toolrooms, metal workshops and maintenance departments requiring reliable performance in demanding materials. Precision Manufacturing and Practical Considerations Manufactured to DIN 338 standards, the drill is produced by grinding the flutes (HSS‑G), yielding very sharp cutting edges and excellent runout accuracy. The fully ground cylindrical shank ensures secure clamping and minimal runout in the chuck. Note that ground HSS drills can be comparatively brittle; for best results, use appropriate coolant, moderate speeds and the support of a rigid machine setup to avoid premature breakage. Highly recommended: Choose the MetavCUT short Twist Drill for demanding metalworking tasks — for technical questions or to confirm suitability for your application, contact METAV Werkzeuge for expert advice via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or on WhatsApp at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48086-FDA Type: Type N (Normal spiral) Diameter: Ø 8.6 mm Spiral (flute) length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G (ground high‑speed steel) Shank: Fully ground (geschliffen) Finish: Bright finished Execution: Short (kurz) Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine (Handbohrmaschine) Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N machine reliably? The MetavCUT Twist Drill Type N is suitable for a wide range of metals, including alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics; its HSS‑G ground geometry is optimised for clean holes in demanding materials. For what is a Twist Drill used? A Twist Drill is primarily used for machining high‑strength materials and larger diameters; its form is easy to sharpen and it withstands considerable loads, which makes it a common choice for drilling in metal and other demanding applications. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills, each designed with geometries and materials matched to the intended workpiece.
8.75mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 8.75 mm, 118° point angle, short HSS, black, DIN 338 A Twist Drill Type N designed for precise metal drilling in drilling machines and hand drills. HSS short Twist Drill, DIN 338 compliant 8.75 mm Diameter with 118° point angle 125 mm Overall length for stable handling Type N normal spiral optimized for metal Black finish for improved surface protection Precision and durability for demanding metalworking This short HSS Twist Drill combines material toughness with a compact design to deliver reliable performance in metal applications. The HSS material provides high wear resistance and good elasticity, making the bit suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. The short design reduces overhang and therefore vibration, which results in precise holes and a lower tendency to wander during drilling. Stability and handling that improve machining accuracy The reduced exposed length and 125 mm overall length increase stiffness and control when using a drilling machine or hand drill. The 81 mm flute length evacuates chips efficiently while maintaining rigidity, enabling consistent results in moderate deep holes. This combination supports clean hole geometry and repeatable centering, which is particularly important for workshop and maintenance tasks. Designed to the DIN 338 short‑drill standard for industrial use Manufactured to DIN 338, this short Twist Drill meets common shop standards for short spiral drills with cylindrical shank. The Type N normal spiral offers a reliable helix geometry for metal cutting, while the 118° point angle supports good centering behavior and is versatile across many metal types. For harder materials such as stainless steel, a steeper angle may be preferred, but the 118° point here balances penetration and chip formation for broad use. Practical guidance and safe working tips When working with this Twist Drill in metal, use appropriate spindle speeds and cutting fluid to extend tool life and improve surface finish. Start with lower speeds for larger diameters and increase coolant flow for heat management. Because the bit is a short version, it is less prone to bending — a benefit when precision is required. For occasional sharpening, the normal spiral geometry of this bit allows easier regrinding while retaining performance. Strong recommendation: the MetavCUT Twist Drill Type N is ideal for precision metal drilling — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 400875-FDA Diameter: 8.75 mm Point angle: 118° Type: Type N Execution: short Material: HSS (High Speed Steel) Flute length: 81 mm Overall length: 125 mm Colour: black For drill: Drilling Machine / Hand Drill Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended for metalworking and is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics; its HSS composition provides the hardness and elasticity needed for these materials. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; its shape allows comparatively easy resharpening and it withstands higher loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills, each designed with geometries and materials adapted to their specific applications.
8.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Bauweise, geschliffene HSS‑Geometrie und 135° Spitzenwinkel sorgen für stabile, präzise Bohrungen in harten Werkstoffen. Die kurze Ausführung reduziert die Auslenkung und ermöglicht schnelleres Bohren bei geringer Anpresskraft. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer kurz von MetavCUT, Typ N Der Spiralbohrer kurz eignet sich für präzise Metallbohrungen an stationären und handgeführten Maschinen und bietet hohe Stabilität bei harten Werkstoffen. HSS‑G geschliffen für hohe Schärfe und Rundlauf 135° Spitzenwinkel für harte Werkstoffe Kurze Ausführung erhöht Stabilität und Präzision Spirallänge 81 mm für sichere Spanabfuhr DIN 338 Norm für kurze Spiralbohrer Stabilität und Präzision bei drehenden Maschinen Die verkürzte Bauform reduziert die Auskraglänge und minimiert so Vibrationen und Verbiegen während des Bohrens. Dadurch entsteht eine höhere Stabilität, die besonders bei mittelgroßen Durchmessern spürbar ist. Der Einsatz einer Handbohrmaschine oder einer stationären Bohrmaschine wird durch die kompakte Länge erleichtert, was saubere Bohrbilder und verbesserte Rundlaufwerte zur Folge hat. Für Anwender bedeutet das weniger Nacharbeit und präzisere Passungen. Effizienz durch geschliffene HSS‑Geometrie und optimierten Spitzenwinkel Die geschliffene HSS‑G Geometrie liefert sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit. In Kombination mit dem 135° Spitzenwinkel dringt der Bohrer leichter in harte Materialien ein und reduziert das Ausbrechen an der Austrittskante. Technisch bewirkt das bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS‑Bohrern, was die Produktivität in Werkstatt und Produktion erhöht. Vielfältige Einsatzgebiete und Praktische Hinweise Der Bohrer eignet sich für legierte und unlegierte Stähle, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe. Als Vertreter des Standard‑Bereichs ist er ideal für Werkstatt‑ und Montagearbeiten sowie für anspruchsvolle DIY‑Projekte. Bei hoher Präzision empfiehlt sich zuvor ein Zentrierbohrer, um ein Wandern des Bohrers zu vermeiden. Kühlung bei zähen Werkstoffen verlängert die Standzeit und sorgt für konstant gute Ergebnisse. Handhabung, Sicherheit und Lebensdauer Die geschliffene Herstellung verlangt umsichtiges Handling: Plötzliche Biegung soll vermieden werden, da geschliffene Werkzeuge spröder reagieren können. Für lange Standzeiten sind kontrollierte Schnittgeschwindigkeit, ausreichende Kühlung und eine stabile Werkzeugaufnahme empfehlenswert. Die Kombination aus kurzer Ausführung und geschliffener Spirale führt zu saubereren Bohrlöchern und reduziert Nacharbeit in der Fertigung. Kaufen Sie den Spiralbohrer von MetavCUT über Metav Werkzeuge und profitieren Sie von präziser Geometrie und robuster Anwendung; bei technischen Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 450875-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Typ: Typ N Norm: DIN 338 Daten Durchmesser: 8,75 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G — Schnellarbeitsstahl, geschliffen Schaftausführung: geschliffen — volle Schaftbearbeitung für hohen Rundlauf Ausführung: kurz — reduzierte Auskraglänge für erhöhte Stabilität Einsatzgebiet: legierter und unlegierter Stahl, Guss, Nichteisenmetalle, Hartkunststoff Spirallänge 81 mm — unterstützt sichere Spanabfuhr DIN 338 — Norm für kurze Spiralbohrer mit Zylinderschaft Typ N — Normalspirale, klassisch für Metallbearbeitung Farbe: blank — helle, glänzende Oberfläche Geeignet für: Handbohrmaschine und stationäre Bohrmaschinen FAQ Wie ist der Spiralbohrer für harte Werkstoffe ausgelegt? Der Spiralbohrer von MetavCUT ist mit HSS‑G geschliffen und einem 135° Spitzenwinkel ausgestattet, wodurch er sich besonders für harte Werkstoffe wie legierten Stahl und Gusseisen eignet und saubere Bohrlöcher erzeugt. Welche Maschinen sind für den Einsatz geeignet? Die kurze Ausführung wurde für den Einsatz an Handbohrmaschinen und stationären Bohrmaschinen entwickelt; bei Verwendung an mobilen Geräten sorgt die reduzierte Auskraglänge für mehr Stabilität und geringeres Verbiegen. Welche Vorteile bietet die geschliffene Ausführung gegenüber gewalzten Bohrern? Geschliffene Bohrer liefern schärfere Kanten und höhere Rundlaufgenauigkeit, was zu präziseren Bohrungen führt. Der Spiralbohrer MetavCUT als HSS‑G bietet diese Vorteile, verlangt jedoch schonendere Handhabung und Kühlung. Gibt es Empfehlungen zur Spanabfuhr und Kühlung? Dank der Spirallänge von 81 mm ist die Spanabfuhr verbessert; bei zähen oder dicken Werkstoffen empfiehlt sich zusätzliche Kühlung, um Werkzeugverschleiß zu reduzieren. Welche Norm und Typenbezeichnung hat der Bohrer? Der Bohrer entspricht der DIN 338 und wird als Typ N geführt, die Norm beschreibt kurze Spiralbohrer mit Zylinderschaft und die Typenbezeichnung steht für die Normalspirale für Metall.
8.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — 8.7 mm, 118° tip, short, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N is a short High Speed Steel drill bit designed for precise metal drilling with hand or drilling machines. Short design for increased stability and precision HSS material for metalworking durability 8.7 mm diameter for standard metal holes 118° tip angle for reliable centring Conforms to DIN 338 short twist drill specification Reliable rigidity for precision metalworking A short HSS twist drill with a Type N spiral offers clear benefits where accuracy matters. The reduced overhang and the 81 mm spiral length together with an overall length of 125 mm reduce deflection and vibration during drilling, resulting in cleaner holes and longer tool life. This geometry is particularly advantageous for workshop and maintenance tasks where repeatable hole quality is required. The roll-formed or ground cutting edges deliver consistent cutting behaviour across common ferrous and non-ferrous metals. Standardised design that supports consistent results Compliance with DIN 338 identifies this bit as a short twist drill with a cylindrical shank, engineered for machine and hand-tool use. The short format increases stability and makes the tool less prone to bending under load, which benefits precision fitting and assembly processes. Users benefit from predictable tool behaviour and easier tool handling when switching between similar machines, while manufacturers achieve repeatable hole tolerances as required in many metalworking applications. Practical compatibility and drilling behaviour The 118° tip angle helps the drill centre reliably on slightly contoured surfaces and reduces the tendency to wander during the initial contact. As a Type N bit, it is the classic geometry for metal drilling and is suited for alloyed and unalloyed steels, cast iron and many non-ferrous metals. The cylindrical shank enables secure clamping in standard chucks of both hand and drilling machines, and the short construction aids chip evacuation and cooling when used with appropriate cutting fluids. Who gains most from this short HSS bit Metalworkers, toolroom technicians and maintenance engineers will appreciate the combination of HSS toughness and the short format for tasks that require repeatable precision. The design reduces the risk of breakage during moderate feeds and supports efficient workshop workflows. Produced by MetavCUT, this bit is a reliable choice for industrial repairs, prototype shops and technical training environments where durability and consistent drilling performance are essential. We recommend the MetavCUT Type N short Twist Drill for precision metalwork — for personalised technical advice and application support please contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40087-FDA Diameter: 8.7 mm Tip angle: 118° Spiral length: 81 mm Overall length: 125 mm Execution: short Type: Type N Material: HSS (High Speed Steel) Colour: Black Suitable for: Hand Drill / Drilling Machine Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is primarily used for machining metal; it performs well on alloyed and unalloyed steels, cast iron and many non-ferrous metals where a short, stable drill is required for precise holes. Can the MetavCUT Twist Drill Type N be used with a hand drill? Yes, the MetavCUT Twist Drill Type N is suitable for both hand drills and machine drilling when clamped securely; its short form reduces bending and improves accuracy in handheld applications. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high-strength materials and larger drill diameters. This shape is easy to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are there? The main categories are Metal drills, Wood drills and Stone/Concrete drills. Why are twist drills pointed? Pointing reduces the chisel edge at the tip, lowering friction and therefore requiring less feed force; it also improves centring of the drill tip in the workpiece. Can a twist drill be used to drill wood? A metal twist drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; metal bits are easier to re-sharpen and have less aggressive self-feed.
8.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Type N) — 8.7 mm, 135°, Short, 5% Cobalt‑Alloyed, HSS‑E, DIN 338 The Twist Drill (Type N) is a short HSS‑E metal drill designed for precise drilling in hard and alloyed steels using a Drilling Machine. Twist Drill Type N by MetavCUT 8.7 mm Diameter for precise metal holes 135° Tip for harder materials Short design improves stability and accuracy HSS‑E with 5% Cobalt for increased heat resistance Precision and Durability for Tough Metals Designed as a short Type N bit, this HSS‑E Twist Drill delivers high stability and reduced deflection thanks to its shorter overhang. The 5% cobalt alloy increases red‑hardness and thermal resistance, so heat buildup during high‑speed metal drilling is better tolerated, extending tool life. For users who require repeatable, clean holes in Alloyed Steel and Stainless Steel, the shorter geometry directly translates into improved hole quality and fewer rejects. Optimised Geometry for Clean, Accurate Holes With a 135° tip angle and a fully ground flute geometry, the tool enters harder materials with less walking and lower axial force. The grinding process creates sharp cutting edges and excellent concentricity, resulting in precise bores and smooth chip evacuation. For customers unfamiliar with cutting geometry: the larger tip angle reduces penetration aggressiveness and is recommended for harder workpieces such as stainless steels. Suited Use Cases and Who Benefits This short, Type N HSS‑E drill is particularly appropriate for machinists and professionals working on metal fabrication, maintenance, and toolmaking. The stable design makes it ideal for drilling on bench or column Drilling Machines where rigidity matters most. If occasional mobile hand‑drilling is needed, the bit still performs, but best results are achieved with a steady, well‑clamped setup. Standards, Manufacturing and Practical Advice Manufactured to DIN 338 and available in a fully ground shaft execution, the bit conforms to recognised short twist‑drill specifications for industrial use. Ground (HSS‑G) drills offer superior roundness and cutting precision compared to rolled counterparts, though they can be less tolerant of shock loads. For prolonged runs, use appropriate cutting fluid and moderate feed rates to maximise tool life and hole quality. MetavCUT recommends this short HSS‑E Twist Drill for demanding metalworking tasks — for expert guidance and application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke/Hersteller: MetavCUT SKU: 47087-FDA Typ: Type N Durchmesser: 8.7 mm Spitzenwinkel: 135° Ausführung: short Material: HSS‑E Farbe: 5% cobalt-alloyed Schaft Ausführung: fully ground Gesamtlänge: 125 mm Spirallänge: 81 mm Für Bohrmaschine: Drilling Machine Norm: DIN 338 Modellserie: Standard Line Anwendung: Drills for metal Verpackungseinheit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (Type N) from MetavCUT used for? The MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength materials and larger drill diameters; its short form is easier to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are there? Commonly, drill types are divided into Metal Drills, Wood Drills and Stone/Concrete Drills, and the MetavCUT Twist Drill (Type N) is the standard choice among metal drills.
8.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short HSS‑G, 8.7 mm, 135°, Bright Finished, DIN 338 The Twist Drill is a short Type N HSS‑G drill designed for precision metalworking in Drilling Machines, offering high stability and clean holes for demanding industrial applications. Short HSS‑G design for higher stability 8.7 mm diameter for precision metal drilling 135° point for hard materials like stainless steel Fully ground shank for high runout accuracy DIN 338 standard for consistent quality Improved stability and faster cutting for metalworking Short design increases rigidity: the short Twist Drill reduces overhang and resists bending, which improves positional accuracy during drilling. The HSS‑G (ground High Speed Steel) geometry enables significantly faster material removal — the manufacturer information cites up to 40% faster drilling with 50% less feed force compared with conventional HSS drills — which directly translates into shorter cycle times and lower operator effort when working with steels and other tough metals. Tip geometry tailored for harder materials A 135° point angle is specified to ease entry into hardened surfaces and to reduce chipping when drilling stainless and alloyed steels. For non‑specialists: a larger point angle flattens the tip, spreading cutting forces and reducing the tendency for the drill to "grab", so holes start cleaner and tool life improves under correct cooling and feed. The drill conforms to the Type N normal spiral profile, making it particularly suitable for metal applications rather than soft woods. Precise shank and manufacturing quality for consistent results The fully ground shank and ground flute geometry produce high concentricity and sharp cutting edges. Grinding (HSS‑G) rather than roll‑forming creates very sharp cutting lips and excellent roundness, which yields cleaner holes and better dimensional accuracy. Users should note that ground drills can be more brittle than rolled types and therefore benefit from using appropriate coolant and secure clamping in the machine. Intended applications and user recommendations Designed primarily as a Drill for Metal, this short Twist Drill excels in workshop and production environments where repeatable accuracy is required: toolrooms, maintenance departments and metal fabrication shops. The 8.7 mm size and 125 mm overall length make it well suited to standard drilling tasks on lathes and drilling machines, especially when drilling in alloyed or unalloyed steel, cast materials and hard plastics. For novice users, using moderate feed and coolant will extend tool life and maintain hole quality. For precision metalwork, choose the MetavCUT short HSS‑G Twist Drill — METAV Werkzeuge provides expert advice and ordering support: eMail info@metav-werkzeuge.com · Phone +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45087-FDA Diameter: 8.7 mm Spiral length: 81 mm Total length: 125 mm Point angle: 135° Type: Type N Execution: short Finish / Colour: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Packaging unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; it is suitable for alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper castings, non‑ferrous metals and hard plastics. The short HSS‑G geometry supports precise drilling in harder materials when used with suitable coolant and machine setup. How does the 135° point angle affect drilling performance with the MetavCUT Twist Drill? A 135° point angle on the MetavCUT Twist Drill reduces initial penetration forces and improves centring on hard materials; this larger angle shortens the effective cutting time and helps prevent chipping at the entry, provided the drill is used with appropriate feed and cooling. For what is a Twist Drill mainly used? A Twist Drill is most commonly applied to the machining of high‑strength materials and larger hole diameters. It is easy to regrind and withstands higher loads, making it suitable for demanding metal drilling tasks. Which three drill types are there? There are three main drill families: Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for that purpose. Why are Twist Drills sharpened (pointed)? Pointing the tip reduces the cross‑cut at the drill’s tip, which lowers friction and consequently the required feed force; this also improves the drill’s ability to self‑centre in the workpiece for cleaner starts. Can a Twist Drill be used for drilling wood? A metal Twist Drill can be used in wood, but guidance and finish are typically inferior to a dedicated wood bit. Metal drills are easier to resharpen and have lower self‑feed, so they are usable in a pinch but do not give as clean results as wood‑specific bits. At which depths is the Twist Drill most used? Solid drilling is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect. When choosing between HSS and HSSE, evaluate whether the specific working conditions justify the higher cost of HSSE material.
8.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing Twist Drill — MetavCUT short Type N, 8.7 mm, 135°, HSS‑G, DIN 338, bright finished The Twist Drill is a short Type N HSS‑G drill designed for precise metalworking in drilling machines and hand drills, optimised for hard materials and industrial use. Short design for enhanced stability and accuracy HSS‑G material for sharp, long‑lasting edges 135° tip angle for hard materials and stainless steel Fully ground shank for high concentricity Conforms to DIN 338 for consistent quality Faster, more stable drilling in demanding metalwork A short, fully ground HSS‑G drill blank delivers a tangible productivity gain when machining metal. The reduced overhang improves rigidity, which means less vibration and cleaner holes even in tougher alloys. For shop floors and maintenance work where repeatable accuracy matters, this short configuration reduces the risk of runout and tool deflection, translating into fewer reworks and more consistent component fit. Optimised tip geometry for hard materials The 135° tip angle and Type N spiral geometry are chosen to reduce initial cutting forces and improve centring in metals such as alloyed and unalloyed steel. This makes the tool particularly effective when starting holes in stainless steel or cast components. The broader tip reduces the tendency to "grab" while the flute geometry efficiently evacuates chips, so feed rates can be maintained with lower thrust force. Built for professional applications and precise results Designed under DIN 338 as a short twist drill, this component suits stationary and portable drilling machines where precision counts. The combination of HSS‑G metallurgy and CNC grinding yields very sharp cutting edges and high concentricity, producing burr‑reduced holes. Use coolant for longer life during deep or continuous drilling to avoid thermal softening. Who benefits from this short twist drill This tool is aimed at machinists, toolroom technicians and maintenance engineers requiring reliable metal drilling performance. The robust construction and Type N cutting geometry make it suitable for a wide range of metals, including cast iron and non‑ferrous alloys. Where compact setup or limited reach reduces leverage, the short design supports steadier machining and repeatable tolerances. Practical handling and drilling recommendations For best results, clamp workpieces securely and select appropriate spindle speed for an 8.7 mm diameter HSS‑G drill in metal. Apply moderate feed to allow the cutting lips to engage and use coolant where possible to extend tool life. Re‑sharpening is feasible for ground drills but must be performed carefully to preserve geometry. The short flute length of 75 mm and overall length of 117 mm make this drill practical for most bench and machine setups. Strongly recommended: Choose MetavCUT when precision and stability are required — METAV Werkzeuge offers expert advice on matching this tool to your machining setup, including speed and coolant recommendations. For personal assistance contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com or by phone +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48087-FDA Type: Type N Diameter: 8.7 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G Shank finish: Fully ground Execution: Short Colour: Bright finished Application: Drills for metal Standard: DIN 338 Model series: Profi Line For drilling machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Type N short drill? The MetavCUT Twist Drill Type N is primarily used for metalworking and is suited to alloyed and unalloyed steels, cast iron, non‑ferrous metals and hard plastics; its short, rigid form and 135° tip make it especially effective for precise drilling in hard materials. Which three drill types exist and where does the MetavCUT Type N belong? There are three common drill categories: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N is a metal drill designed for professional machining of metals and belongs to the classic metal drill category.
8.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 8.8 mm, 118°, black, DIN 338 The Twist Drill is a short Type N HSS drill designed for precise metal drilling in workshop and industrial settings. Short HSS Type N for high stability 8.8 mm Diameter for precise metal holes 118° Point Angle for improved centring DIN 338 short design reduces bending Black finish for clear visibility in the chuck Short design that boosts stability and accuracy A short design according to DIN 338 reduces the unsupported length of the tool, which directly improves rigidity and lowers the risk of bending during drilling. This construction leads to more precise holes and longer tool life when working on metal parts. For tasks requiring tight tolerances, the compact geometry is particularly advantageous because it minimises vibration and preserves concentricity even under handheld or machine-fed conditions. High-speed steel core for reliable cutting performance Manufactured from HSS (High Speed Steel), the drill offers a balanced combination of toughness and heat resistance suitable for common metalworking tasks. HSS is easy to re-sharpen and maintains cutting performance on alloyed and unalloyed steels, cast iron, non-ferrous metals and many plastics. This material choice reduces the likelihood of breakage in smaller diameters and supports repeated sharpening during maintenance, making it a durable option for everyday workshop use. Optimised tip geometry for centring and chip evacuation The 118° point angle and classic Type N helix create a reliable starting behaviour on flat and slightly curved surfaces, improving initial centring without excessive walking. The standard flute geometry facilitates efficient chip removal while drilling through metal, which helps maintain cutting edges and reduces heat build-up. These features together make the drill particularly well suited to metalworking tasks that demand a clean entry and consistent hole quality. Designed for compatibility and straightforward handling With a diameter of 8.8 mm, a spiral length of 81 mm and a total length of 125 mm, this short HSS drill is compatible with a wide range of drilling machines and hand-held drills used in workshops. The Type N helix is the classic choice for metal drilling and pairs well with standard chucks. The black finish aids visibility in the chuck and protects surfaces during storage. Handling is simplified by the reduced overhang, which also contributes to safer operation and easier regrinding when required. Strong recommendation: For consistent results in metalworking choose the MetavCUT short HSS Twist Drill — technical advice and fitting support are available from METAV Werkzeuge; for personalised guidance email info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Key specifications for reliable workshop use Designation: Twist Drill Brand: MetavCUT SKU: 40088-FDA Type: Type N Diameter: 8.8 mm Point Angle: 118° Material: HSS (High Speed Steel) Execution: short Colour: black Spiral Length: 81 mm Total Length: 125 mm Application: Drills for metal Recommended machine: Drilling Machine / Hand Drill compatible Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the typical use of the Twist Drill from MetavCUT (Type N)? The MetavCUT Twist Drill Type N is primarily used for drilling in high-strength materials and for larger hole diameters in metals; its robust roll-rolled HSS construction makes it suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics, while offering good resistance to breakage and straightforward re-sharpening. Which three drill types are commonly available? Common drill categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for steel and similar materials. Why are Twist Drills dressed (pointed)? Dressing the tip reduces the cross-cut at the peak of the Twist Drill, which significantly lowers friction so that less feed force is required; at the same time the dressed tip improves centring and reduces walking when starting the hole. Can the MetavCUT Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with a dedicated wood bit; the metal drill offers easier re-sharpening and less aggressive self-feeding, which may affect hole cleanliness. For which drilling depths is the Twist Drill most commonly used? The Twist Drill is typically used for through drilling where a cylindrical hole is produced by material removal; it is most common for diameters up to 20 mm and drilling depths up to around 100 mm, depending on the machine and setup. Is HSS better than HSSE? The general belief that HSSE steels are categorically superior to HSS is not always correct; the choice between HSS and HSSE should depend on actual working conditions, as HSSE may justify its higher cost only under specific demands.
8.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short HSS‑E, 8.8 mm, 135° Point Angle, 5% cobalt‑alloyed, DIN 338, Fully Ground A Twist Drill (Type N, short) designed for precision metal drilling with improved stiffness and suitability for hard materials. Short Design for higher drilling stability HSS‑E Material with 5% Cobalt for wear resistance 135° Point Angle for hard and stainless steels Fully Ground shank for excellent runout accuracy Conforms to DIN 338 for short twist drills Higher stability for precise metal drilling The short execution provides a Short Design that reduces the cantilever length and significantly lowers deflection during operation. This means the bit delivers straighter holes and improved positional accuracy when used in a Drilling Machine or bench setup. For precision work in metal, reduced vibration translates into fewer rejects and faster downstream operations. Durable HSS‑E composition for tough applications Made from HSS‑E with 5% Cobalt, the drill retains hardness at elevated temperatures and resists wear when cutting alloyed steels. Cobalt‑alloyed high‑speed steel improves tool life and allows more aggressive cutting parameters on harder materials. This blend is advantageous when drilling stainless steel or other demanding metals where conventional HSS would wear prematurely. Geometry optimised for hard materials and centering A 135° Point Angle and Type N normal spiral geometry favour slower entry but superior centring and lower axial forces in hard materials. The geometry reduces chipping at the tip and helps maintain hole quality in thicker or tougher workpieces. For users unfamiliar: the point angle controls penetration and centring, with 135° commonly chosen for steels and stainless applications. Fully ground shank and conformity to DIN 338 The bit is Fully Ground, meaning the flutes and geometry are created by CNC grinding rather than rolling, resulting in sharper cutting edges and high concentricity. The product conforms to DIN 338 for short twist drills, ensuring consistent dimensions and interchangeability with standard toolholders. Users benefit from predictable fit and performance in professional shop environments. Intended applications and recommended use This short Type N twist drill is primarily specified for Drilling for Metal and is suitable for alloyed and unalloyed steel, cast iron, Non‑Ferrous Metals and Plastics under appropriate speeds and lubrication. Its shorter overall length increases stability for handheld or stationary machining. For best results, use cutting fluid and moderate spindle speeds; cooling reduces heat build‑up and extends tool life. Choose MetavCUT short twist drills for demanding metalwork and contact METAV Werkzeuge for personalised technical advice via eMail: info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications for accurate selection Twist Drill Brand: MetavCUT SKU: 47088-FDA Type: Typ N / Type N Diameter: 8.8 mm Overall Length: 125 mm Spiral Length: 81 mm Point Angle: 135° Execution: short Shaft Execution: fully ground Material: HSS‑E Composition: 5% cobalt‑alloyed For Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Standard: DIN 338 Colour: 5% cobalt‑alloyed Manufacturer: MetavCUT Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is mainly applied to the machining of high‑strength materials and larger drill diameters; its short form is easier to regrind and withstands greater loads, making it suitable for demanding metalwork where tool robustness and reusability are important. Which three drill types exist? Regarding drill families, common categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill group and is optimised for metalworking applications.
8.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G, Ø 8.8 mm, 135°, Type N, Bright Finished, DIN 338 A short Twist Drill Type N for Drilling Machine use, designed for precise metal drilling in demanding industrial and workshop applications. Short design for higher drilling stability HSS-G ground geometry for clean, precise holes 135° tip for hard and stainless materials Fully ground shank for excellent concentricity Conforms to DIN 338 for reliable interchangeability Faster, more reliable metal drilling for tough materials The short HSS-G construction delivers a direct benefit: significantly reduced tendency to bend or whip during use, which translates into more precise holes and longer tool life under proper conditions. The 135° tip angle is optimised for harder metals and stainless steels, shortening the pilot time and improving centring on difficult surfaces. As a Type N normal-spiral geometry, this design balances chip evacuation and cutting action for typical metalworking tasks while allowing stable performance on stationary and mobile machines. Stability and handling that improve machining results A reduced overhang and the shortened overall length mean less vibration and better runout behaviour on the spindle; this yields cleaner hole edges and reduces rework. The fully ground shank guarantees improved concentricity in the chuck, so tolerances remain tight even during series production. With a diameter of 8.8 mm, a spiral length of 81 mm and an overall length of 125 mm, the tool is tailored for tasks where a compact, rigid drill bit is required to maintain accuracy in metals such as alloyed and unalloyed steels, cast steel and non-ferrous metals. Who benefits and how to choose the right drill Workshop professionals, toolmakers and maintenance technicians gain most from a short, ground HSS tool when precision and repeatability matter. The combination of HSS-G material and the short format reduces the required feed force and can increase drilling speed in appropriate conditions. For applications involving Sintereisen or Temperguss, the recommended approach is to use cutting fluid and moderate cutting parameters to exploit the drill’s performance without risking premature wear. Understanding the key specifications and safe use DIN 338 classifies short twist drills with cylindrical shank made from high-speed steel; in this case the designation indicates a ground geometry (HSS-G), produced by grinding rather than rolling. Ground drills typically achieve sharper cutting edges and higher runout precision, but they require careful handling because they can be more brittle than rolled variants. For best results, use appropriate coolant, clamp the tool securely, and keep overhangs minimal. These measures reduce heat and extend service life while ensuring consistent hole quality. Sustainability, service and after-sales support MetavCUT manufactures this short twist drill to industrial standards and METAV Werkzeuge as the vendor provides comprehensive technical consultation. If there is any uncertainty about material suitability, machining parameters, or alternative tool geometries, METAV Werkzeuge offers expert guidance and tailored recommendations to match specific workshop requirements. For precision metalworking choose the MetavCUT short HSS-G Twist Drill Type N for improved stability and hole quality — METAV Werkzeuge provides professional consultation at info@metav-werkzeuge.com or +49 2822 7131930 and via WhatsApp at +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 45088-FDA Type: Typ N Diameter: 8.8 mm Spiral length: 81 mm Overall length: 125 mm Point angle: 135° Material: HSS-G (ground high-speed steel) Finish / Colour: Bright finished Shank execution: Fully ground Execution: Short Standard: DIN 338 For use in: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suited to? The MetavCUT Twist Drill Type N is primarily used for metalworking; it is especially suitable for alloyed and unalloyed steel, cast steel, gusseisen and other hard materials. Its short, ground HSS construction provides improved stability and cleaner holes when used with appropriate machine settings and coolant. How does the short format of this Twist Drill affect drilling performance? A short design reduces the overhang and increases stiffness, which lowers vibration and improves concentricity. For the MetavCUT short Twist Drill this means better hole quality and the ability to operate at higher effective cutting speeds with lower feed force compared to longer equivalents. For what is a Twist Drill mainly used? A Twist Drill is mainly applied in the machining of high-strength workpieces and larger drill diameters. Its geometry is relatively easy to regrind and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three primary drill categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills pointed? Pointing reduces the cross-edge at the tip of the Twist Drill, which significantly lowers friction and thus requires less feed force. At the same time the pointed geometry improves centring in the workpiece for more accurate drilling. Can a Twist Drill be used to drill wood? A metal Twist Drill such as the MetavCUT HSS-G can be used in wood, but it offers poorer guidance and a less clean finish than a dedicated wood drill. It is easier to resharpen and has less self-feeding tendency than specialised wood drills. For which drilling depths is the Twist Drill the most used tool? Solid drilling is commonly performed with Twist Drills. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE steels are inherently superior to standard HSS is not universally correct. The decision should be based on the specific working conditions and whether the performance benefits justify the higher acquisition cost.
8.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill short HSS-G Type N — Ø 8.8 mm, 135° tip, Bright Finished, DIN 338 The Twist Drill short HSS-G Type N is a precision metal‑drilling tool designed for use in Drilling Machines, offering high stability and fast cutting performance for hard materials. Short design for improved stability Ø 8.8 mm for precise metal holes 135° tip for hard materials like stainless steel HSS‑G fully ground for sharp cutting edges Conforms to DIN 338 for consistent accuracy Faster, cleaner metal drilling with measurable efficiency The short Twist Drill from MetavCUT combines a compact geometry with a HSS‑G ground flute to deliver up to 40% faster drilling and 50% less feed force compared with conventional HSS variants. This efficiency reduces operator effort and machine load, making the tool particularly advantageous for repetitive metalworking tasks. The reduced overhang lowers vibration and increases Precision, resulting in cleaner hole walls and less burr formation. Reliable performance in hard and alloyed metals Designed as a Type N normal‑spiral drill, this short twist drill is optimised for a wide range of metallic materials: legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle and hard plastics. The 135° tip angle shortens entry time and improves centring in tougher workpieces, so fewer dwell corrections are needed. For users with limited experience, this means more consistent results when working with challenging materials. Precision geometry and fabrication for professional results The tool is manufactured according to DIN 338 as a short twist drill with a cylindrical shank. The fully ground flute geometry (HSS‑G) ensures razor‑sharp cutting edges and excellent runout accuracy, which benefits machining centres and manual setups alike. Ground drills deliver very clean holes and high repeatability; however, they require appropriate coolant and controlled feed to avoid chipping under heavy intermittent loads. Compact design that expands machine compatibility With a spiral length of 75 mm and overall length of 117 mm, the short execution reduces cantilever and enhances stability in the chuck. This compactness makes the drill well suited for use in Drilling Machines where rigidity and minimal deflection are critical. The bright finished surface aids chip evacuation and inspection, while the cylindrical shank fits standard chucks reliably. Practical guidance for safe and effective use When working with harder alloys, prefer moderate speeds and steady feed to leverage the 135° geometry. Use cutting fluid for prolonged tool life and improved surface finish. The short design is ideal for setups where overhang must be minimised; for very deep holes beyond the spiral length, choose an appropriately longer tool. For specific machining parameters or support with selection, METAV Werkzeuge offers comprehensive advice and technical consultation. Strong recommendation: For precise metalworking choose the MetavCUT short HSS‑G Twist Drill Type N for its superior stability and cutting efficiency — for technical questions or personalised advice contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48088-FDA Type: Type N Diameter: 8.8 mm Tip angle: 135° Material: HSS-G Norm: DIN 338 Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Colour/Finish: bright finished Application: Drills for metal Model series: Profi Line For Drilling Machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which tasks suit the MetavCUT Twist Drill short HSS‑G Type N best? The MetavCUT Twist Drill short HSS‑G Type N is mainly applied to the machining of high‑strength materials and larger drill diameters; its short form is easy to regrind and withstands higher loads, making it especially suitable for precise metalworking and demanding industrial applications. Which three drill types are commonly available? The three principal drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for drilling in a variety of metals.
8.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS Ø 8.9 mm, 118° tip, black, DIN 338, short design The Twist Drill Type N short HSS is a metalworking bit designed for precise drilling in metals with hand drills and drilling machines, offering a stable short shank and a 118° tip for efficient penetration. Short design for increased stability HSS construction for reliable metal drilling 118° tip for easier penetration in softer metals DIN 338 standard for short twist drills Compatible with hand drills and drilling machines Precision and stability for demanding metalwork The short Type N geometry delivers high stability and reduced run-out during operation, which directly benefits hole accuracy. With a Ø 8.9 mm cutting diameter and a total length of 125 mm, this short twist drill minimises bending and chatter when used in both portable and benchtop drilling equipment. The compact spiral length of 81 mm concentrates rigidity where it matters, enabling consistent hole diameter and a cleaner finish even under higher cutting loads. Durable HSS material for extended tool life Made from HSS (High Speed Steel), the bit combines hardness and toughness for prolonged service life in a wide range of metals. The material choice supports drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, while still allowing straightforward resharpening when required. For users this means fewer tool changes, predictable wear behaviour and reliable performance in routine workshop and maintenance tasks. Practical use cases and who benefits most Designed for professional workshops, maintenance teams and skilled hobbyists, the MetavCUT short twist drill is ideal where precision and repeatability are required. The Type N spiral is optimised for metallic materials, and the black finish improves visibility during setup. If you are unsure whether the bit suits a specific machine or material, METAV Werkzeuge offers detailed advice and technical support — contact via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Standards, tip geometry and application guidance Conforming to DIN 338 as a short twist drill ensures consistent dimensions and manufacturing quality across batches. The 118° tip angle favours entry and centring in softer metals and related tasks, while the classic Type N flute geometry balances chip evacuation and cutting action. For harder stainless steels or very abrasive materials, consider a flatter tip angle or a coated variant; for standard steel work, this short HSS bit provides an effective combination of penetration and rigidity. Strong recommendation: Opt for the MetavCUT Twist Drill Type N short HSS for precise metal drilling — expert consultation and ordering support are available from METAV Werkzeuge at info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40089-FDA Diameter: 8.9 mm Tip angle: 118° Spiral length: 81 mm Total length: 125 mm Type: Type N Material: HSS Execution: short Colour: black Suitable for: Drilling Machine / Hand drills Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill are primarily used for machining high-strength materials and larger drill diameters; their form is easy to resharpen and they withstand considerable loads, making them suitable for demanding metalworking tasks. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills group and is designed accordingly. Why are twist drills tipped? The tip sharpening reduces the cross-cut at the drill point, which lowers friction and therefore reduces the required feed force; this also improves centring of the MetavCUT Twist Drill during the initial entry into the workpiece. Can a Twist Drill be used to drill wood? A metal drill like the MetavCUT Twist Drill can be used in wood, but guidance and finish are usually inferior compared with a dedicated wood bit; metal drills are easier to resharpen and show less self-feed, which can be an advantage in some manual operations.
8.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 8.9 mm, 135° point, short HSS‑E, 5% cobalt‑alloyed, fully ground shank, DIN 338, MetavCUT The Twist Drill is a short Type N drill designed for precision metalworking, offering high stability and improved penetration for harder materials thanks to its 135° point angle. Short design for improved stability 8.9 mm Diameter for common metal holes 135° Point Angle for harder materials HSS‑E with 5% cobalt for heat resistance Fully ground shank for high runout accuracy Precision and stability for metalworking that matters This short, purpose‑built cutter delivers stability where long overhangs would cause deflection. The reduced overall length and shorter projection reduce bending and vibration during drilling, which directly improves hole accuracy and prolongs tool life. For workshop operations and portable drilling machines, this geometry supports fast, straight entries into Steel and other metals, translating to fewer rejected parts and less rework. Durable material for demanding conditions Manufactured from HSS‑E with 5% cobalt, the tool resists heat and wear significantly better than standard HSS. That makes it suitable for sustained drilling in alloyed and unalloyed Steel, Cast Iron and Non‑Ferrous Metals. The cobalt content increases red hardness, so the cutter maintains cutting edges at higher temperatures; the direct user benefit is longer service life and fewer tool changes when machining tougher materials. Geometry optimised for harder workpieces The 135° point angle is chosen to ease engagement with harder materials and to reduce chatter on difficult surfaces. A wider point angle shortens the initial entry time and decreases the tendency of the tip to wander, which is particularly helpful on stainless Steel and high‑strength alloys. The "Type N" normal helix fluting provides a balance between chip evacuation and cutting stability for metalworking tasks. Ground flute finish and norm conformity for precise holes Being fully ground (HSS‑G style) yields sharp cutting lips and very good concentricity, resulting in clean, burr‑reduced holes with excellent surface finish. Conformance to DIN 338 ensures consistent dimensions and interchangeability, which benefits production runs and tool inventories. For users who value repeatable quality, this specification simplifies planning and tool management in professional shops. Intended use and target users Designed for machinists, maintenance teams and metalworking professionals, this short twist drill excels where precision counts and materials are tough. It suits both stationary machines and hand‑held drilling machines where a compact, stiff tool is needed. The result is reliable performance in fabrication, repair, and assembly environments where reproducible hole quality reduces secondary operations. We recommend MetavCUT’s precision HSS‑E short twist drill for demanding metal applications; for personalised technical advice or if you are unsure this tool meets your requirements, contact METAV Werkzeuge for competent consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 47089-FDA Diameter: 8.9 mm Total length: 125 mm Spiral length: 81 mm Point angle: 135° Type: Type N Execution: Short Colour: 5% cobalt‑alloyed Shank execution: Fully ground Material: HSS‑E Standard: DIN 338 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its short form and robust design make it particularly suitable for precise drilling in Steel and other metals. This form is easy to re‑grind and withstands higher loads, which supports longer life under demanding conditions. Which 3 drill types exist? When considering the MetavCUT Twist Drill (Type N), the three main drill categories to know are Metal drills, Wood drills, and Stone/Concrete drills. Each category is optimised for different materials and geometry, so selecting the correct drill type ensures better results and tool life.
8.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Short Type N 8.9 mm | 135° | HSS-G | Bright Finished | DIN 338 The Twist Drill Short Type N is a precision metalworking drill for Drilling Machines, designed for stable and accurate machining of hard materials. Short design for higher stability 135° point angle for hard materials HSS‑G fully ground for precise holes Complies with DIN 338 for short drills Suitable for use in Drilling Machine applications Durable HSS‑G construction for reliable machining Equipped with HSS‑G material, this Twist Drill delivers consistent cutting performance when working with alloyed and unalloyed steels. The fully ground geometry produces sharp cutting edges and high concentricity, which results in clean, burr‑reduced holes and extended tool life under correct cooling. Because the flute geometry is produced by CNC grinding rather than rolling, users benefit from superior roundness and repeatable accuracy that is particularly useful in demanding metalworking environments. Short overall length for enhanced stability and accuracy Thanks to its Short Design, the drill offers reduced overhang from the chuck, lowering the tendency to deflect and improving concentricity when drilling in tougher materials. This results in higher feed control and better hole quality, especially on bench and floor Drilling Machines. When precision counts, the shorter projection enables operators to apply lower lateral forces and maintain tighter tolerances, making the tool ideal for repetitive, high‑precision metalworking tasks. Optimised geometry for hard materials and faster drilling With a 135° Point Angle, the Twist Drill penetrates harder workpieces such as stainless steel more efficiently than standard angles, reducing the initial skidding and improving centring. The ground cutting lips and polished flutes support faster chip evacuation and allow up to 40% quicker drilling rates under suitable conditions, while requiring significantly lower feed force compared with conventional HSS drills. This geometry is particularly effective for applications where reduced entry burr and consistent hole form are priorities. Conformance, application and user guidance Manufactured to DIN 338, this Short Twist Drill Type N is specified for metalworking tasks on rotating stationary or portable machines. It is intended primarily for drilling metallic materials including cast iron, sintered iron, non‑ferrous metals and hard plastics, and is not optimised for very soft timbers. For best results, use appropriate cutting speed, steady coolant supply and a stable clamping setup to exploit the drill’s high concentricity and edge sharpness. Strong recommendation: Choose MetavCUT Twist Drill for demanding metal drilling tasks and contact METAV Werkzeuge for expert technical support and ordering assistance — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Marke: MetavCUT SKU: 45089-FDA Diameter: 8.9 mm Overall Length: 125 mm Spiral Length: 81 mm Point Angle: 135° Type: Type N Execution: short Shank Execution: fully ground Material: HSS-G Standard: DIN 338 Colour: bright finished For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Standard Line Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Short Type N best used for? The MetavCUT Twist Drill Short Type N is primarily used for machining metal; it excels in drilling alloyed and unalloyed steel, cast materials and harder plastics thanks to its robust HSS‑G construction and shortened geometry that improves stability. Can the MetavCUT Twist Drill be used in a hand drill or only in a Drilling Machine? The Twist Drill is designed for Drilling Machine applications to achieve optimal stability and concentricity, though it may be used in heavy‑duty hand drills with appropriate clamping and reduced projection; for precise industrial tasks a stationary Drilling Machine is recommended. What are Twist Drills used for? Twist Drills are mainly applied in the machining of high‑strength materials and large drill diameters; their grindable form allows straightforward re‑sharpening and they withstand greater loads, making them suitable for demanding metalwork. Which three drill types exist? The common drill types are Metal Drill, Wood Drill and Stone/Concrete Drill. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip, significantly lowering friction; by re‑pointing the tip the required feed force decreases and the drill centres better in the workpiece. Can you drill wood with this Twist Drill? A Metal Drill like the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated Wood Drills; however, metal drills are easier to re‑sharpen and show less self‑pulling action. For which depths is the Twist Drill most used? Twist Drills are the standard tool for through drilling; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm. Is HSS or HSSE better? The assumption that HSSE is always superior to HSS is incorrect; selection should depend on working conditions and whether the higher cost of HSSE is justified by specific application demands.
8.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill (Type N) — Short HSS‑G, Ø 8.9 mm, 135° Tip, Bright Finished, DIN 338 A MetavCUT Twist Drill (Type N) for precise metalworking, optimised for use with a Drilling Machine and handheld drills where stability and clean holes are essential. Short design for increased stability and precision Fully ground shank for high runout accuracy 135° tip angle for hard materials HSS‑G material for fast, precise metal drilling Conforms to DIN 338 for standardised performance Short length for greater accuracy and less deflection A shorter overall length reduces the exposed Cantilever and therefore the tendency to bend during drilling. The MetavCUT short Twist Drill combines a reduced Spiral Length with a robust geometry to deliver higher stability and repeatable hole accuracy. For workshop applications this means fewer reworks and tighter tolerances, especially when working with hard materials where tool chatter normally degrades the hole quality. Sharper geometry lowers feed forces and boosts speed The HSS‑G (ground high speed steel) geometry and a 135° tip are tailored to penetrate tougher metals with less effort. The grinded flute profile produces very sharp cutting edges and better centring, so drilling can be up to 40% faster and requires significantly lower Feed Force compared with conventional HSS bits. Type N normal spiral makes this bit especially suitable for steels, cast materials and non‑ferrous metals while maintaining clean, burr‑reduced holes. Engineered for metalworking and standardised reliability Manufactured to DIN 338 the short Twist Drill is specified for metal applications on stationary and portable drilling equipment. It excels in drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics. Conformance to the norm ensures consistent dimensions, shank fit and performance across batches, simplifying tool selection and inventory for professional workshops. Practical handling and care for longer tool life Fully ground flutes and a bright finished surface aid chip evacuation and improve runout precision, but ground HSS can be more brittle than rolled variants. Use coolant for extended life when drilling deep or hard materials and avoid excessive lateral forces; stationary drilling with appropriate clamping yields the best results. For handheld operations the short design reduces vibration and improves control, while occasional resharpening restores edge quality if needed. We recommend the MetavCUT Profi Line short HSS‑G Twist Drill as the professional choice for precision metal drilling — for expert advice and technical support contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48089-FDA Diameter: 8.9 mm Overall Length: 117 mm Spiral Length: 75 mm Tip Angle: 135° Type: Type N Execution: short Shaft Finish: fully ground Surface Colour: bright finished Material: HSS‑G Standard: DIN 338 For Use With: Drilling Machine (Handbohrmaschine) Model Series: Profi Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ How well does the MetavCUT Twist Drill Type N perform in stainless and hard steels? The MetavCUT Twist Drill Type N with a 135° tip and HSS‑G ground geometry is designed to reduce Anbohrzeit and improve centring in harder materials; it provides faster penetration and cleaner holes in stainless and alloyed steels when used with appropriate coolant. Can the MetavCUT Twist Drill Type N be used in a handheld drill? Yes, the short design of the MetavCUT Twist Drill Type N improves stability and control in a Hand Drill, making it suitable for many on‑site and workshop tasks; however, for maximum tool life and precision, stationary drilling and cooling are recommended. What are Twist Drills used for? Twist Drills are used primarily for machining high‑strength materials and larger diameters; they are relatively easy to resharpen and withstand higher loads. The short version is particularly suited to precision work in steels and other hard materials. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills.
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com