End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
20 mm Calibration Ring, 41.3/131.4/243.5/281.2 mm Gauge Block Set, Grade 2, Boxed - Metav IndustryLine
Take advantage of the combination of Grade 2 accuracy, hardened special steel construction and a practical assortment of gauges for dependable verification of workshop calipers; order the set directly via Metav Werkzeuge or consult our specialists for integration guidance. Kalibriersatz für Messschieber, 5-tlg., Güte 2, incl. Einstellring 20 mm — Metav IndustryLine A Kalibriersatz für Messschieber, 5-tlg., Güte 2 designed for traceable verification and routine calibration tasks in workshops and quality departments, suitable for end-gauge checks and setting calipers. Grade 2 accuracy for traceable measurements Five gauge masses for wide calibration range Hardened special steel construction Includes setting ring 20 mm for quick adjustment Precision that keeps production moving This calibration set is built to ensure repeatable, traceable measurement steps during daily quality checks. The assortment of end gauges — with measured increments listed in the product data — provides a practical spread for verifying common caliper positions and for zero-point checks. The Grade 2 tolerance defines a reliable benchmark for workshop calibration, helping to reduce downtime caused by uncertain readings. By using dedicated gauge blocks instead of ad hoc references, process reliability and measurement confidence are improved, which supports faster decision-making on the shop floor. Robust construction for frequent use Manufactured from special steel, aged and hardened, the gauges resist wear and maintain dimensional stability under regular handling. The set is supplied as a matched collection that preserves relative accuracy between pieces, facilitating quick comparative checks and transfer standards in assembly and inspection workflows. A compact total weight of approximately 2.6 kg makes the kit easy to store and carry between stations while retaining the mass needed for stable placement. The included setting ring 20 mm speeds up zeroing procedures and reduces the number of adjustments required during setup. Standards compliance and practical documentation Compliance with DIN EN ISO 3650 and VDI/VDE/DGQ 2618 provides a verifiable basis for conformity within calibration routines and internal audits. The gauges are intended for use as reference end masses for caliper calibration and routine control, offering a simple method to check linear response across typical measurement ranges. Incorporating calibrated end gauges into a documented inspection plan supports quality systems and helps justify measurement decisions during process audits. For complex integration questions or specific traceability chains, Metav Werkzeuge can advise on the best practices for implementing the set into existing control plans. For precision calibration accessories from Metav IndustryLine and advice on adapting this gauge set to specific workshop requirements, contact Metav Werkzeuge for personalised support and reliable supply from Emmerich. Technical data Article number: M318.207 GTIN: 4054469128085 Weight: 2.6 kg Pieces per set: 5 Facts Sizes (mm): 41.3 / 131.4 / 243.5 / 281.2 Setting ring (mm): 20 Tolerance grade: 2 Special features Material: Special steel, aged and hardened Standards: DIN EN ISO 3650; VDI/VDE/DGQ 2618 Category: End gauges FAQ Which sizes are included in the set? The set contains end gauges with nominal dimensions 41.3 mm, 131.4 mm, 243.5 mm and 281.2 mm plus a 20 mm setting ring as part of the 5-piece configuration supplied with the Kalibriersatz für Messschieber, 5-tlg., Güte 2 (SKU M318.207). What is the intended use of this gauge set? The Metav IndustryLine calibration set is intended for verification and setting of calipers and for use as reference end gauges during routine workshop checks and calibration procedures. What material and durability can be expected? The gauges are made from special steel, aged and hardened, offering durability for frequent comparative measurements and stable performance in standard workshop environments. Which standards does the product comply with? Compliance is declared to DIN EN ISO 3650 and VDI/VDE/DGQ 2618, supporting integration into documented quality and calibration processes. How many pieces are in the set and what is the total weight? The 5-piece set comprises four nominal end gauges plus the 20 mm setting ring; the complete kit weighs approximately 2.6 kg (SKU M318.207). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy (DIN 861/1), ceramic construction and a compact 20 mm nominal length to ensure a stable, wear‑resistant reference in calibration and production checks. Order the Ceramic gauge block 20 mm directly via Metav Werkzeuge or ask our consultants if needed. Ceramic gauge block 20 mm, Grade 1 (DIN 861/1) — Metav IndustryLine The Ceramic gauge block 20 mm, Grade 1 (DIN 861/1) serves as a temperature‑stable reference standard for precise length calibration and repeatable inspection tasks in workshops and metrology labs. Grade 1 accuracy to DIN 861/1 20 mm nominal length, precision ceramic Durable, wear‑resistant material Compact reference for calibration routines Consistent reference for precise calibration A compact 20 mm ceramic reference delivers a stable baseline for length verification in routine quality checks. The Grade 1 classification in accordance with DIN 861/1 signals a high level of metrological performance suitable for laboratory and shop‑floor use; this ensures reproducible results when used as a comparative standard for instruments or during incoming inspection. Ceramic as a material contributes low thermal expansion and excellent dimensional stability, which reduces drift during temperature fluctuations and supports consistent measurement chains. Durable design that reduces maintenance needs The use of ceramic provides high hardness and wear resistance, making the block a long‑lasting element in a set of gauges or a standalone reference. Its small mass contributes to ease of handling while limiting the risk of surface damage from magnetic contaminants, and the compact format simplifies storage and transport between workstations. This durability translates into fewer replacements and less downtime, delivering a pragmatic efficiency advantage for calibration schedules and production controls. Traceable asset for quality systems and process control As a precisely defined reference, the block is suited to integration into documented quality procedures and serves well for periodic verification of measuring equipment. The compact gauge is easy to reference in inspection plans, enabling rapid checks that uphold process capability and minimise scrap. Supplied with clear identification (GTIN and SKU) and Metav IndustryLine provenance, the block supports traceability and inventory control within a modern metrology workflow. Contact Metav Werkzeuge for delivery from Emmerich and to discuss how this Grade 1 ceramic gauge block can be incorporated into existing calibration routines Technical data Article number: M324.020 GTIN: 4054469143286 Manufacturer: Metav IndustryLine Nominal length: 20 mm Material: Ceramic Accuracy grade: 1 (DIN 861/1) Tariff number: 90173000 Weight: 0.038 kg Facts Nominal dimension: 20 mm Accuracy grade: 1 Weight: 0.038 kg GTIN: 4054469143286 SKU: M324.020 Special features Compact ceramic gauge block for length references Grade 1 tolerance according to DIN 861/1 Durable and wear‑resistant material Category: gauge blocks (end masses) FAQ What is the tolerance class of this gauge block? The Ceramic gauge block 20 mm, Grade 1 (DIN 861/1) is specified as Grade 1 according to DIN 861/1, making it suitable for laboratory and workshop reference use. Can this block be used for routine calibration tasks? Yes. The Metav IndustryLine ceramic block is intended as a stable reference standard for routine calibration and quick verification of measuring equipment. Is the material suitable for environments with magnetic contamination? Yes. The block is made from ceramic, which is non‑magnetic and resists common shop contaminants better than some metallic gauges. How is the product identified for traceability? The gauge block carries GTIN 4054469143286 and SKU M324.020 for inventory and traceability within quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 mm End Gauge, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a Grade 0 reference that combines certified dimensional accuracy, hardened special steel construction and compact handling for dependable verification tasks; order this precision end gauge directly via Metav Werkzeuge or consult the team for application advice Single end gauge 20 mm — Grade 0 reference (DIN EN ISO 3650) A single end gauge 20 mm designed as a stable length standard for laboratory checks, workshop inspection and routine verification tasks End gauge 20 mm, DIN EN ISO 3650 Grade 0 Hardened special steel for long-term stability Grade 0 tolerance for precision verification Compact, workshop-ready reference with low weight Ensure measurement conformity with a Grade 0 standard This Grade 0 end gauge is produced to DIN EN ISO 3650, delivering a 20 mm nominal length with the accuracy expected from a precision reference. As a calibrated manufacturing standard, the gauge block provides a verifiable basis for dimensional checks and quality control processes; its Grade 0 specification translates into tight dimensional tolerances that reduce uncertainty in Go/No‑Go tests, comparator setups and incoming goods inspection. The clear standardisation supports traceable workflows and faster decision-making in production. Durable design for consistent, repeatable results Manufactured from hardened special steel, the block resists wear and deformation during day‑to‑day use, which preserves the reference dimension over many inspection cycles. The compact cross‑section (35 x 9 mm for this nominal size) and a low mass of 0.05 kg make handling straightforward while limiting thermal inertia and operator fatigue. The robust material choice ensures surface integrity and contributes to reproducible measurements when used as a master in gauge stacks or as a single master reference in bench metrology. Integrates easily into workshop metrology routines The geometry and finish of this end gauge support quick seating in height gauges, comparison stands and gauge block sets. As a fixed nominal reference, it simplifies periodic verification tasks and aids the calibration chain by offering a stable 20 mm datum for comparative checks. Reduced handling time and straightforward incorporation into existing inspection plans deliver practical efficiency gains, helping to keep throughput steady without compromising measurement confidence. For reliable Grade 0 reference standards, choose the Metav IndustryLine end gauge and contact Metav Werkzeuge in Emmerich for procurement and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M319.200.0 GTIN: 4054469131962 Label: Einzel-Endmaß 20 mm, DIN ISO 3650, Güte 0 DIN ISO 3650 ECLASS: 21170108 Core specifications Nominal size: 20 mm Accuracy class: Grade 0 Cross-section: 35 x 9 mm Weight: 0.05 kg Tariff number: 90173000 Material & special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Category: End measure / gauge block Intended use: Reference standard for verification and inspection FAQ What tolerance level does this end gauge meet? The end gauge meets Grade 0 tolerances as defined in DIN EN ISO 3650, providing a high‑precision reference for dimensional verification. Is the material suitable for regular workshop use? Yes; the block is made from hardened special steel, offering wear resistance and dimensional stability for routine inspection tasks. Can this gauge be used in stacked gauge sets? The geometry and finish are suitable for stacking as part of a gauge block set or for standalone use as a master reference at 20 mm. How should the reference be handled and stored to preserve accuracy? Handle with clean, oil‑free gloves and store in a dry, dust‑free box to avoid corrosion and surface damage that could affect the reference dimension. Does the product include a calibration certificate? The product is manufactured to the DIN EN ISO 3650 standard; calibration and certificates depend on the selected service level at the time of purchase Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 mm End Gauge, Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
The hardened 20 mm gauge block delivers Grade 1 dimensional reference performance to DIN EN ISO 3650, combining stable geometry and wear‑resistant material for reliable workshop and laboratory checks; its compact cross‑section ensures handling stability and repeatable measurements. Order the 20 mm gauge block directly via Metav Werkzeuge or ask our consultants if needed. Gauge block 20 mm (DIN EN ISO 3650) – Grade 1, hardened special steel The gauge block 20 mm is a precision reference block designed for dimensional calibration and routine inspection tasks in machine shops, quality control and metrology laboratories. DIN EN ISO 3650 standard compliance Grade 1 accuracy for reference measurements Hardened special steel construction Nominal 20 mm with compact cross-section Reliable reference for calibration and inspection A Grade 1 block to DIN EN ISO 3650 serves as a stable reference for comparative measurements and process checks. The Grade 1 designation indicates a high level of geometric fidelity within the DIN standard, making this block suitable for shop‑floor verification and traceable inspection work. As a solid reference element, it reduces measurement uncertainty in go/no‑go checks and assists in maintaining machine tolerances, thereby supporting consistent production quality. Robust construction for repeatable results Manufactured from hardened special steel, the block resists wear and surface damage during repeated wringing and handling. The larger cross‑section applied to this nominal size (35 x 9 mm) increases bending stiffness, which helps maintain dimensional stability under normal workshop conditions. At approximately 0.05 kg it combines a compact footprint with enough mass to sit steadily during measurement, minimising handling errors and enabling quick, repeatable readings when used alongside comparison instruments. Practical integration into workshop workflows The block’s compact format and standardised dimensioning simplify storage in gauge sets and incorporation into calibration routines. Clear identification via SKU and GTIN streamlines procurement and inventory management, while the defined customs classification supports cross‑border logistics. By providing a consistent reference, the block contributes to faster setup verification, fewer rejected parts and a more efficient quality process overall. Secure the Metav IndustryLine Grade 1 20 mm gauge block through Metav Werkzeuge to strengthen calibration reliability on the shop floor and in the lab — contact Metav Werkzeuge for ordering and product guidance. Technical data Article number: M319.200.1 GTIN: 4054469131979 Nominal size: 20 mm Standard: DIN EN ISO 3650 Tolerance grade: Grade 1 Material: Hardened special steel Facts Weight: 0.05 kg Cross-section: 35 x 9 mm Customs tariff number: 90173000 Special features DIN EN ISO 3650 compliance Grade 1 high-precision reference Hardened special steel construction Compact format for stable handling FAQ What tolerance class does this block have? The block is supplied as Grade 1 to DIN EN ISO 3650, providing a high‑precision reference suitable for routine calibration and inspection. Is the material suitable for frequent wringing and handling? Yes, the hardened special steel construction of the 20 mm gauge block is chosen for wear resistance and long service life under regular use. Can this block be integrated into existing gauge sets? The nominal 20 mm dimension and compact cross‑section make the block compatible with standard gauge sets and simple to store alongside existing reference pieces. What identifiers are available for procurement and inventory? The block is listed with article number M319.200.1 and GTIN 4054469131979, which simplifies ordering and stock management. Is this block intended for workshop use or laboratory calibration? This Grade 1 gauge block is suited to both workshop verification and quality‑control applications in laboratories where a reliable dimensional reference is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-125mm End Gauge Connector With Two 10mm End Gauges, Grade 1 - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy, modular extension pieces and a compact assembly range of 20–125 mm for reliable gauge-block extensions; order the connector directly via Metav Werkzeuge or consult our advisors for configuration support. End gauge connector M317.133 — connector for gauge blocks under 100 mm, adjustable 20–125 mm (Metav IndustryLine) End gauge connector M317.133 is a compact connector designed to join and extend gauge blocks for precision length stacks in workshop and inspection environments Grade 1 accuracy Extends gauge blocks 20–125 mm Includes two 10 mm end gauges Modular 10/15/20/25/30 mm extensions Precise, repeatable extensions for compact gauge systems This connector delivers reproducible length stacks for gauge blocks classified for use under 100 mm, placing it in the micro measurement class where compactness and stiffness are essential. The device is supplied with two 10 mm end gauges and a set of extension pieces that permit a continuous adjustable range from 20–125 mm, enabling fine incremental assembly without sacrificing stability. The Grade 1 designation signals conformance with industry expectations for accuracy in length transfer and makes the connector suitable for routine calibration tasks and workshop quality checks where dependable repeatability is required. Modular design that simplifies set-up and reduces downtime A straightforward modular concept lies at the heart of the connector: a pass piece derived from a 10 mm end gauge is combined with a choice of extensions (10/15/20/25/30 mm) to build the required nominal length quickly. This arrangement reduces handling time during changeovers and minimises the need for specialist jigs. The modularity also reduces inventory complexity because a small number of extension components covers a wide span of lengths, delivering an efficient and cost-effective approach to gauge-block assembly while maintaining the precision needed for production and inspection work. Practical applications and assurance in everyday metrology The connector is intended for use with gauge blocks and end measures in machining, tooling and inspection workflows where compact stacks are common. It supports standardised measurement practices by enabling accurate joins between end gauges, which helps maintain measurement traceability across routine checks. The product’s design and Grade 1 quality make it a reliable component of a measurement set that contributes to consistent process control and fewer rework cycles, thereby supporting leaner inspection routines and better throughput in small to medium production environments. For fast specification and supply of the M317.133 Grade 1 end gauge connector, contact Metav Werkzeuge to confirm the optimal extension set for the intended gauge-block configuration — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M317.133 GTIN: 4054469157757 EClass: 21170108 ETIM: EC002219 Quality grade: Grade 1 Facts Adjustable length: 20–125 mm Included end gauges: 2 × 10 mm Extension pieces: 10, 15, 20, 25, 30 mm Suitable for gauge blocks under 100 mm Tariff number: 90173000 Special features Pass piece made from a 10 mm end gauge Modular extension system for flexible stacks Intended for precision length assembly and calibration FAQ How does the connector extend gauge-block stacks? The connector M317.133 joins end gauges using a pass piece and selectable extensions, enabling an adjustable nominal length between 20 and 125 mm while preserving stack stability. Is the connector suitable for laboratory calibration work? Yes, the Grade 1 specification of the connector makes the M317.133 appropriate for workshop calibration and routine inspection where reliable repeatability is required. Which extension lengths are supplied for flexible stacking? The connector is supplied with extension pieces in 10, 15, 20, 25 and 30 mm increments to cover a broad range of assembly lengths. Can the connector be used with any gauge-block set under 100 mm? The connector is designed for gauge blocks and end measures with a maximum nominal size below 100 mm and is compatible with standard block geometries used in that class. What benefit does Grade 1 provide in daily metrology tasks? Grade 1 indicates a level of manufacturing quality and dimensional conformity that supports consistent measurement results, reducing uncertainty in routine control tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20.2 mm Gauge Block For Micrometer Calibration DIN EN ISO 3650/1, Special Steel - Metav IndustryLine
Combining standardised compliance, a stable 20.2 mm reference length and a special steel construction, this end standard delivers reproducible verification results for micrometres and helps maintain quality control across workshop and laboratory environments. Order the end standard directly via Metav Werkzeuge or consult our advisers if required. End standard for verification of micrometres, 20.2 mm (DIN EN ISO 3650/1) — Metav IndustryLine The End standard for verification of micrometres, 20.2 mm is a precision reference gauge designed for routine verification and comparative checks of workshop and laboratory micrometres. DIN EN ISO 3650/1 compliant Precision 20.2 mm reference length Special steel construction for durability Compact, workshop-suitable design Dependable reference for routine verification The end standard provides a stable 20.2 mm reference that simplifies verification routines and reduces cumulative measurement uncertainty. Conformity with DIN EN ISO 3650/1 means the item serves as a recognised reference in both production and inspection tasks, enabling consistent comparative checks against micrometre readings. The compact form factor supports efficient handling during serial checks, helping to streamline quality-control workflows while maintaining traceable, repeatable outcomes. Material choice and practical benefits Constructed from special steel, the gauge combines dimensional stability with resistance to everyday workshop handling. The material choice reduces the risk of surface damage during use and helps preserve the reference length over time. For operators, this translates into fewer replacement cycles and a reliable standard that supports regular calibration intervals and process stability. The modest mass also makes single-person handling straightforward without compromising rigidity. Integration into inspection routines and asset lists The robust specification and clear identification data (SKU and GTIN available) facilitate cataloguing the gauge within inspection equipment lists and calibration schedules. Used as a comparative reference, the standard helps to validate micrometre performance quickly, supporting corrective action when discrepancies appear. Where formal traceability is required, the compliance with an established DIN/EN/ISO standard simplifies documentation and auditing of measurement processes. For purchase advice, availability or ordering of the Metav IndustryLine end standard, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — for precise delivery and handling information Technical data Article number: M318.203.6 GTIN: 4054469178448 Material: Special steel Standard: DIN EN ISO 3650/1 Size: 20.2 mm Weight: 0.3 kg Customs tariff number: 90173000 Numbers / core technical data Reference length: 20.2 mm Mass / weight: 0.3 kg GTIN numeric ID: 4054469178448 Special features / design Category: End standards Intended use: Verification of micrometres Brand: Metav IndustryLine FAQ What standard does the end standard comply with? The end standard complies with DIN EN ISO 3650/1, which defines requirements for end standards used in the verification of micrometres. What is the reference dimension of the gauge? The reference length is 20.2 mm for the End standard for verification of micrometres, 20.2 mm (Metav IndustryLine). Which material is used for the gauge? The gauge is made from special steel, chosen for its dimensional stability and workshop durability. Is the gauge suitable for routine workshop verification? Yes. The design and material make the gauge suitable for regular comparative checks and routine verification of micrometres in both workshop and laboratory settings. Does the product data state an included calibration certificate? The provided product data does not specify an included calibration certificate for the end standard; calibration status is not indicated in the dataset. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20.5mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Ceramic construction and DIN 861/1 Grade 1 tolerance provide a stable, wear‑resistant reference for repeatable dimensional checks; the 20.5 mm nominal length and low thermal expansion contribute to consistent stack measurements. Order the gauge block directly via Metav Werkzeuge or consult the product specialists for delivery options. Ceramic gauge block 20.5 mm, Grade 1 DIN 861/1 — Metav IndustryLine reference standard A ceramic gauge block 20.5 mm designed as a stable reference for precision dimensional metrology and calibration routines Ceramic construction for thermal stability DIN 861/1 Grade 1 tolerance Nominal length 20.5 mm for reference use Low weight 0.04 kg for easy handling Exceptional stability for reliable reference measurements The ceramic composition of this gauge block ensures low thermal expansion, reduced susceptibility to corrosion and excellent surface hardness, which together yield long‑term dimensional stability. As a precision reference element, the block supports reproducible measurement chains where temperature influence and wear must be minimised. The material choice is particularly advantageous when repeatability and minimal drift are critical for quality control and inspection tasks. Defined tolerance and suitability for calibration work Manufactured to Grade 1 (DIN 861/1), the block offers a tolerance class appropriate for many workshop and laboratory reference uses, providing predictable deviation bounds when incorporated into slip‑gauge stacks or calibration sets. The 20.5 mm nominal length is compatible with standard reference block assortments and facilitates combination with other sizes to build exact lengths. The specification supports traceable dimensional checking workflows and helps maintain instrument accuracy across routine inspections. Compact handling and process integration benefits At a nominal mass of 0.04 kg and with a compact footprint, this gauge block is practical for frequent handling in assembly and inspection environments. Its lightweight nature reduces operator fatigue during stacking operations and simplifies transport between bench and measuring device. The block’s surface finish and material hardness diminish the need for frequent replacement, supporting uninterrupted production checks and lowering lifetime maintenance needs. Confidence through a trusted supplier network Supplied under the Metav IndustryLine umbrella, this reference block benefits from a supplier that positions itself as a "quality filter" for the European market. Metav’s broad product range and logistical presence in Emmerich support reliable availability for industry and trade. Choosing this ceramic gauge block aligns practical measurement performance with a supplier model that emphasises consistent quality and accessible stock for workshop integration. For specialist enquiries and to arrange supply of Metav IndustryLine ceramic gauge blocks, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss availability and delivery specifics Technical Data Article number: M324.020.5 GTIN: 4054469143293 Material: Ceramic Nominal length: 20.5 mm Weight: 0.04 kg Grade: 1 (DIN 861/1) Tariff number: 90173000 Facts Nominal length: 20.5 mm Mass: 0.04 kg Tariff number: 90173000 Special features Ceramic construction Compliance: DIN 861/1 Grade 1 Category: Gauge block Lightweight design Intended for reference measurements FAQ What tolerance does the ceramic gauge block meet? The ceramic gauge block meets Grade 1 (DIN 861/1) tolerances; the specification defines permissible deviations for reliable reference use. Is calibration status specified for this gauge block? The provided product data does not specify a supplied calibration certificate; calibration status is not stated in the available information. For which applications is the Ceramic gauge block 20.5 mm (Metav IndustryLine, SKU M324.020.5) suitable? This gauge block is suitable for reference and dimensional metrology tasks, slip‑gauge stacks and routine inspection where a 20.5 mm standard length is required. How should the Ceramic gauge block 20.5 mm be handled and stored? Handle the Ceramic gauge block carefully to avoid shocks and scratches; store in a clean, dry environment and protect surfaces from contaminants to preserve dimensional integrity. What are the material benefits of the Ceramic gauge block 20.5 mm? The ceramic material offers low thermal expansion, good wear resistance and corrosion immunity, which support stable measurements over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20.5mm Gauge Block Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 conformity, Grade 0 tolerance and hardened special steel construction for a stable reference standard; order the gauge block directly via Metav Werkzeuge or contact our consultants for application advice. Single gauge block 20.5 mm (Grade 0) — Metav IndustryLine Single gauge block 20.5 mm for traceable workshop and laboratory reference measurements, compliant with DIN EN ISO 3650 and produced for high-stability calibration tasks Single gauge block 20.5 mm, Grade 0 DIN EN ISO 3650 conformity Hardened special steel construction Reference accuracy for precision work The gauge block offers a nominal size of 20.5 mm with Grade 0 classification under DIN EN ISO 3650, making it suitable where a tight reference is required. Built from hardened special steel, the block resists wear and maintains dimensional stability during frequent use. For assembly and setting tasks, its compact form provides a reliable reference dimension that integrates easily into inspection benches and calibration sets, supporting consistent checks without excessive rework. Durable format for everyday calibration and measurement With a 35 x 9 mm cross-section applicable to sizes above 10.1 mm, the block balances stiffness and handling comfort; the section reduces bending under clamp forces while remaining manageable by a single operator. The material choice and heat treatment minimise surface degradation, which keeps long-term uncertainty low and extends inspection intervals. The compact weight (approx. 0.052 kg) and robust finish ensure the standard can be handled on the shop floor without special fixtures yet still perform as a stable reference in precision tasks. Practical integration and traceability in the workshop The block is supplied as a single, calibrated reference compliant with recognised norming, and its compact dimensions support stacking with other gauge blocks in a set for generating composite lengths. The DIN EN ISO 3650 designation facilitates traceability within quality systems and documentation; labelling and the SKU make inventory management straightforward. For procurement and inventory rationalisation, this reference standard fits seamlessly into routine inspection workflows and reduces downtime associated with uncertain measurements. For traceable reference standards from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and reliable supply: eMail info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge supports specification checks and delivery to workshops across Europe. Technical data Article number: M319.205.0 GTIN: 4054469131986 Tariff number: 90173000 Numbers / Core technical data Nominal size: 20.5 mm Weight: 0.052 kg Cross-section: 35 x 9 mm (applies for sizes >10.1 mm) Grade: 0 Designs / Special features Material: hardened special steel Standard: DIN EN ISO 3650 Category: End gauges / Gauge block Manufacturer brand: Metav IndustryLine FAQ What tolerance class does this gauge block meet? The gauge block meets Grade 0 tolerance according to DIN EN ISO 3650, providing a tight reference suitable for high-quality workshop and laboratory use. Is the material resistant to wear during regular handling? Yes, the block is manufactured from hardened special steel, chosen to reduce wear and preserve dimensional stability under normal workshop handling. Can this block be combined with other sizes to form composite lengths? The single gauge block is designed for stacking in sets; its compact cross-section and stable surfaces enable reliable composite lengths when used with compatible blocks. How is the product identified for inventory and traceability? Identification is provided by the article number M319.205.0 and the GTIN 4054469131986, which support stock control and traceability in quality documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20.5mm Gauge Block, Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Reliable reference measurement with 20.5 mm nominal size, DIN EN ISO 3650 Grade 1 accuracy and a hardened special-steel finish for long-term stability. Benefit from a compact, workshop-ready measuring standard and order the gauge block directly via Metav Werkzeuge or consult our specialists for application support. Gauge block 20.5 mm — DIN EN ISO 3650 Grade 1 (Metav IndustryLine) The Gauge block 20.5 mm is a precision reference standard for dimensional verification and calibration in workshops and inspection labs. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 20.5 mm precisely ground Compact, workshop-ready gauge block Reduce measurement uncertainty with a certified reference Achieve consistent inspection outcomes with a DIN EN ISO 3650 Grade 1 reference that minimises traceable measurement uncertainty. The 20.5 mm nominal size is ground and lapped to tight tolerances, providing a reliable benchmark for setting calipers, micrometres and comparators. Specifying a Grade 1 block supports repeatable dimensional decisions and reduces scrap and rework by ensuring instruments are checked against a stable, standardised artefact. Robust construction for durable shop-floor use Built from hardened special steel, the block resists wear and maintains flatness and parallelism during regular handling. The cross-section specification for sizes above 10.1 mm (35 x 9 mm) delivers the stiffness required to avoid bending during use, while the compact mass supports easy handling and storage on inspection benches. This combination of material and form factor prioritises long service life and consistent dimensional stability in daily quality control routines. Confidence through a trusted supplier network Sourcing this precision standard from Metav IndustryLine places it within a wider supply chain designed for workshop reliability. Metav’s approach to democratising precision means that high-quality measurement equipment is available with dependable logistics from Emmerich, backed by decades of sector experience and a broad product portfolio. This practical assurance supports efficient procurement and integration into existing inspection regimes. Contact Metav Werkzeuge today for tailored advice on integrating this DIN EN ISO 3650 Grade 1 20.5 mm gauge block into the measurement set-up at your site and benefit from specialist guidance from our Emmerich team Technical Data Article number: M319.205.1 GTIN: 4054469131993 Category: Gauge blocks (Endmasse) Customs tariff number: 90173000 Facts Nominal size: 20.5 mm Weight: 0.052 kg Accuracy class: Grade 1 Cross-section: 35 x 9 mm (applies for >10.1 mm) Special features Material: Hardened special steel Standard: DIN EN ISO 3650 Product label: Endmaß 20,5 mm, DIN ISO 3650, Güte 1 Compact design for workshop use FAQ What measurement tasks is this gauge block suited for? This 20.5 mm gauge block by Metav IndustryLine is suitable for setting and verifying calipers, micrometres and comparator gauges where a Grade 1 reference is required. Does the gauge block comply with international standards? Yes, the block is manufactured to DIN EN ISO 3650 and delivered as a Grade 1 reference suitable for general workshop and laboratory calibration checks. What material and durability can be expected? Constructed from hardened special steel, the gauge block offers wear resistance and long-term stability for routine inspection work. Which cross-section applies to this nominal size? For the 20.5 mm nominal size the specified cross-section is 35 x 9 mm, providing increased stiffness for reliable handling. Can this gauge block be used to check micrometres and calipers? Yes, the 20.5 mm reference dimension is ideal for verifying the accuracy of micrometres and calipers and for periodic instrument checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Gauge Block Grade 0, Hardened Special Steel, Cross Section 35x9mm, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, hardened special steel and the standardised DIN EN ISO 3650 specification to secure reliable reference measurements in calibration and inspection. Order the gauge block directly via Metav Werkzeuge or ask the consultants for application support. End gauge 200 mm — Grade 0, DIN EN ISO 3650 (Metav IndustryLine) The 200 mm gauge block provides a Grade 0 reference length for laboratory and workshop measurement tasks, intended as a precision standard for calibrating gauges and verifying measuring equipment. Grade 0 accuracy according to DIN EN ISO 3650 Hardened special steel for dimensional stability Cross-section 35 x 9 mm for secure handling Nominal length 200 mm for medium-range calibration Precision that supports reliable decisions The End gauge 200 mm (M320.200.0) is manufactured to DIN EN ISO 3650 tolerances and delivers a Grade 0 reference length suitable for high-accuracy comparative measurements. As a defined reference standard, it reduces uncertainty when checking micrometres, calipers and setting up inspection fixtures. The standardisation of the length permits reproducible results across shifts and machines, which translates into fewer rework cycles and more consistent production quality. Built for stability and repeatability Constructed from hardened special steel, the block combines wear resistance with the dimensional stability required for frequent use in workshops and calibration labs. The 35 x 9 mm cross-section gives a compact, rigid profile that resists bending during handling, while the roughly 0.8 kg mass provides a steady feel when seating or stacking. These material and geometric choices extend service life and preserve the calibrated form, ensuring the block remains a dependable reference over time. Practical integration into inspection workflows Designed as a precision reference standard, the block suits bench calibration, incoming inspection and periodic verification routines where a defined nominal length is required. Its compact form simplifies storage and handling in busy metrology cabinets and measuring benches. Where traceability or specific calibration certificates are required, Metav IndustryLine can advise on calibration routes to integrate this block into existing quality-management processes without compromising throughput. For Grade 0 reference lengths from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich for personalised advice and supply — phone +49 2822 7131930, eMail info@metav-werkzeuge.com Technical Data Article number: M320.200.0 GTIN: 4054469132426 Label: End gauge 200 mm, DIN EN ISO 3650, Grade 0 Facts Nominal length: 200 mm Cross-section: 35 x 9 mm Weight: 0.8 kg Tolerance grade: 0 (Grade 0) Tariff number: 90173000 Materials and standards Material: Hardened special steel Standard: DIN EN ISO 3650 ECLASS: 21170108 Category: Gauge blocks FAQ What tolerance level does this gauge block provide? The M320.200.0 is manufactured to Grade 0 tolerances in accordance with DIN EN ISO 3650, making it suitable as a high-precision reference length. Is the gauge block supplied with a calibration certificate? The End gauge 200 mm is delivered as a factory-manufactured precision block; calibration certificates are not included by default and can be arranged on request through Metav IndustryLine. What material is the block made from and why does it matter? This gauge block is made from hardened special steel, which offers durability and dimensional stability under normal workshop and laboratory conditions. For which applications is this 200 mm block intended? The block is intended for calibration, comparative checking of measuring instruments and as a reference length in inspection routines where a reliable 200 mm standard is required. How should the gauge block be handled to preserve accuracy? Handle with clean, dry hands or gloves, avoid shocks, and store in a protective environment to prevent corrosion or wear; routine inspections help maintain its role as a reference standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Gauge Block Set Grade 1 DIN EN ISO 3650 Hardened Special Steel Querschnitt 35x9mm - Metav IndustryLine
Take advantage of Grade 1 precision and a DIN EN ISO 3650 reference standard in a compact, robust format — the hardened special steel construction and a 200 mm nominal length provide a reliable baseline for workshop and calibration tasks. Order the gauge block directly via Metav Werkzeuge or ask the consultants for application advice. Gauge Block M320.200.1 — 200 mm Grade 1, hardened special steel (Metav IndustryLine) The Gauge Block M320.200.1 is a 200 mm precision end standard designed as a stable reference for workshop measurement and calibration work in accordance with DIN EN ISO 3650. Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel construction 200 mm nominal length, stable profile Cross-section 35x9 mm for high stiffness Consistent reference accuracy for routine calibration The DIN EN ISO 3650 specification ensures the block serves as a consistent reference standard for routine checks and setup tasks. As a Grade 1 item, the block provides workshop-level precision that supports repeatable measurements and reliable comparative checks. This classification helps quality managers and technicians select an appropriate standard without needing in-depth standard‑analysis; the designation itself signals the intended measurement fidelity for everyday industrial use. Robust geometry that supports handling and stability With a nominal length of 200 mm and a cross-section of 35x9 mm, the block balances reach and stiffness for dependable handling. The hardened special steel construction resists wear and preserves flatness under normal workshop use, reducing the need for frequent replacement. The moderate mass (approx. 0.8 kg) contributes to stable placement during comparative measurements, making the block suitable for use on surface plates, gauge stands or within fixture-based inspection routines where a rigid reference is essential. Practical integration into quality workflows The block is supplied as a clearly identified industrial article (SKU M320.200.1, GTIN 4054469132433), simplifying inventory and traceability in stock lists and calibration schedules. Its format suits direct comparison with length measurement instruments and complements laboratory and workshop sets where standardised reference pieces are required. The listing does not state the inclusion of a calibration certificate; when a traceable certificate is necessary, this requirement should be specified separately to ensure alignment with internal quality assurance practices. For reliable workshop references from Metav IndustryLine, request the M320.200.1 gauge block via Metav Werkzeuge or consult the product specialists at Metav Werkzeuge for application-specific guidance. Technical Data Article number: M320.200.1 GTIN: 4054469132433 Category: End gauges (Endmasse) Facts Nominal length: 200 mm Cross-section: 35 x 9 mm Weight: 0.8 kg Grade: 1 Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Label: Endmaß 200 mm, DIN ISO 3650, Güte 1 FAQ What level of accuracy does Grade 1 indicate? Grade 1 denotes a workshop precision classification under DIN EN ISO 3650; the Gauge Block M320.200.1 is intended as a reliable reference for routine calibration and comparative measurement tasks. What material is the gauge block made from? The block is manufactured from hardened special steel, selected to provide wear resistance and sustained flatness for frequent use. Is the 200 mm block suitable for fixture setup and comparative checks? Yes, the 200 mm nominal length and a 35 x 9 mm cross-section make the block well suited to fixture setups, transfer standards and direct comparative checks on benches and stands. Does the product listing include a calibration certificate? The product data does not state that a calibration certificate is included; if a traceable certificate is required, this should be arranged separately. How is the block identified for ordering and inventory? The item is listed under SKU M320.200.1 and GTIN 4054469132433 for direct identification in procurement and stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200-300mm End Gauge Holder Very Sturdy Construction, Expandable - Metav IndustryLine
Benefit from the combination of very robust construction, an expandable 200–300 mm clamping range and a stiff 30.5 × 2.5 mm profile to secure reproducible reference lengths for calibration tasks; order the end gauge holder directly via Metav Werkzeuge or consult our specialists for tailored advice. End gauge holder M317.115 — 300 mm holder with 200–300 mm clamping range (expandable) by Metav IndustryLine The End gauge holder M317.115 is a purpose-built reference clamp for the secure use of end gauges in precision measurement and calibration tasks within workshop and inspection environments. Very robust construction Clamping range 200–300 mm (expandable) 300 mm nominal holder length Stable reference for reproducible calibration results The holder delivers a very robust construction that provides a stable datum for end gauges, reducing measurement scatter caused by flexing or movement. The substantial 30.5 × 2.5 mm cross-section increases profile stiffness, which in turn supports consistent contact conditions during measurements; this helps laboratories and production inspection points to maintain traceable and repeatable results. By focusing on rigidity and secure clamping, the unit reduces the need for repeated checks and accelerates throughput in routine calibration work. Practical range and workshop usability Designed for the standard range of metrology tasks, the clamp covers a clamping range of 200–300 mm and accepts a nominal holder length of 300 mm, making it suitable for the common end gauges used in machine shops and quality departments. The component’s modest mass of 0.7 kg keeps it easy to position while still giving the solidity required for precise reference measurement. The expandable clamping arrangement allows adaptation to slightly different reference lengths without the need for multiple dedicated holders, saving storage space and simplifying daily workflows. A sensible choice for precision-oriented teams For teams seeking a balance of durability and practical operation, this holder supports accurate measurement and calibration routines with minimal hassle. The design is aimed at the everyday needs of inspection benches and calibration stations where a reliable reference speeds up checks and reduces uncertainty. Metav’s approach to precision democratisation means access to well-engineered metrology aids that fit into organised processes, backed by documentation and local distribution for the European market. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine end gauge holder can be integrated into inspection procedures — request specification details by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: M317.115 GTIN: 4054469127446 ECLASS: 21170108 Zolltarifnummer: 90173000 Brand: Metav IndustryLine Numbers / Core technical data Clamping range: 200–300 mm Nominal holder length: 300 mm Cross-section: 30.5 × 2.5 mm Weight: 0.7 kg Special features Very stable execution (high rigidity) Expandable clamping range Intended for use with end gauges for precise measurement and calibration FAQ What clamping range does the end gauge holder cover? The End gauge holder M317.115 provides a clamping range of 200–300 mm and a nominal holder length of 300 mm for standard end‑gauge references. Can the clamping range be extended beyond 300 mm? The holder is described as expandable for adjusted applications; the standard configuration covers 200–300 mm and additional extension options can be discussed for specific needs. Is this holder suitable for calibration work? Yes. The design of the M317.115 supports the secure positioning of end gauges and is intended for precise measurement and calibration tasks in inspection and quality environments. What indicates the rigidity and stability of the device? Rigidity is achieved through the 30.5 × 2.5 mm cross‑section and the very stable construction, which together reduce flexing and help ensure reproducible reference conditions. How portable is the holder for bench use? With a weight of 0.7 kg and a compact 300 mm nominal length, the unit is easy to handle and reposition on inspection benches while remaining sufficiently heavy for secure clamping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200-500mm Gauge Block Holder Very Robust Design - Metav IndustryLine
Benefit from the very stable construction and the broad 200–500 mm clamping range for repeatable positioning; order the End gauge holder 200–500 mm directly via Metav Werkzeuge or ask our consultants if needed. End gauge holder 200–500 mm — very stable construction, 200–500 mm clamping range (Metav IndustryLine) The End gauge holder 200–500 mm is a precision mounting fixture for secure positioning and calibration of end gauges within a 200–500 mm span, designed for repeatable set-ups in workshop and calibration environments. Very stable construction for repeatable set-ups 200–500 mm clamping range Cross-section: 30×5 mm up to 300 mm Cross-section: 30×6.7 mm above 300 mm Built for repeatable calibration and accurate positioning The holder provides a stable construction that translates directly into repeatability during calibration cycles. Its engineered geometry keeps end standards aligned while measurements are taken, which reduces operator-induced variation and supports consistent results across batches. By fixing the reference gauge in a rigid fixture, metrology procedures become more reliable and traceable, helping to meet internal quality checks and external audit requirements without guesswork. Robust profile reduces deflection and eases handling The two cross-section profiles — 30×5 mm for spans up to 300 mm and 30×6.7 mm for longer spans — are chosen to balance stiffness with manageable weight. The holder weighs 0.4 kg, which aids quick set-up yet maintains sufficient rigidity for precise positioning. This combination minimises bending over the clamping length and shortens preparation time, so measurement technicians can complete more calibrations with stable reference points and fewer re-measures. Suitable for workshop use and calibration laboratories As a purpose-built fixture for end gauges, the unit integrates into routine measurement workflows and complements existing calibration equipment. The robust design is ideal for repeated use in production inspection stations as well as in dedicated calibration benches. Backed by Metav IndustryLine quality and the distribution strength of Metav Werkzeuge, the holder supports the democratisation of precision by making dependable metrology tools available to a broad range of users, from small workshops to specialised inspection labs. Choose Metav IndustryLine's End gauge holder 200–500 mm for stable, repeatable calibration — contact Metav Werkzeuge for tailored advice and reliable supply direct from Emmerich Technical data Article number: M317.207 GTIN: 4054469127538 Category: Endmasse Weight: 0.4 kg Country tariff number: 90173000 Facts Clamping range: 200–500 mm Cross-section up to 300 mm: 30×5 mm Cross-section above 300 mm: 30×6.7 mm Special features Very stable construction Intended for positioning end gauges and calibration Suitable for workshop and laboratory use Brand: Metav IndustryLine FAQ What clamping range does the holder cover? The End gauge holder 200–500 mm from Metav IndustryLine covers a clamping range of 200–500 mm, allowing mounting of end standards across that span. How do the cross-section sizes affect performance? The 30×5 mm profile (up to 300 mm) and the 30×6.7 mm profile (above 300 mm) increase stiffness with length; the Metav IndustryLine End gauge holder M317.207 therefore reduces deflection for longer spans. Is the holder suitable for calibration benches? Yes, the holder is engineered for repeatable set-ups and is suitable for both workshop inspection stations and calibration benches when used with appropriate end gauges. What is the weight of the fixture and how does that influence handling? The fixture weighs 0.4 kg, which balances ease of handling with sufficient rigidity for stable positioning during measurement tasks with the Metav IndustryLine holder. Can the holder be used with standard end gauges? The design of the End gauge holder 200–500 mm accommodates standard end gauges for precise positioning and calibration; Metav IndustryLine’s fixture is intended to simplify and stabilise gauge mounting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm End Gauge Holder Very Sturdy Design - Metav IndustryLine
Robust heavy‑duty construction combined with a precise 0–200 mm clamping range delivers repeatable results for calibration and workshop measurement tasks; the compact, lightweight design (0.4 kg) simplifies handling without sacrificing stability. Order the End gauge holder directly via Metav Werkzeuge or consult Metav specialists for application support. End gauge holder 0–200 mm — robust clamping, profile 30 x 5 mm (Metav IndustryLine) The End gauge holder 0–200 mm is a purpose-built fixture for securing end gauges during precision measurement and calibration in metrology workshops and quality control environments. Robust heavy‑duty construction Clamping range 0–200 mm Profile 30 x 5 mm for sizes ≤300 mm Ideal for calibration and precision measurement Secure clamping for reproducible measurements The holder’s robust construction and engineered profile ensure stable contact between the gauge face and the clamping surfaces, reducing measurement scatter and enabling reproducible readings. With a specified clamping range of 0–200 mm, the device is optimised for standard metrology tasks where repeatability and firm fixation are priorities. The compact assembly keeps potential flexing to a minimum while the modest mass of 0.4 kg supports quick positioning and secure handling during series checks. These attributes translate into fewer retests and a more efficient inspection routine. Suited to calibration workflows and workshop use Designed for the demands of calibration benches and production inspection, the holder supports the systematic use of end measures for verification of length gauges and comparator setups. The profile dimension 30 x 5 mm (applied to sizes up to 300 mm) gives a consistent contact geometry that assists in aligning gauge faces and maintaining flatness under clamping forces. The result is a practical balance between accessibility and metrological stability, making this device a straightforward choice for calibration technicians and quality engineers who require a reliable fixturing solution. Compact design that saves space and time Classified in the standard range for measuring tools (measurement range up to 300 mm), this holder integrates easily into existing benches and fixtures without occupying excessive space. The compact footprint and clear functional design reduce setup time for repeat measurements, supporting lean workflows on the shop floor. Identified as M317.205, the unit is supplied with clear technical characteristics so that planners and purchasing professionals can match the holder to their existing end measures and instruments with confidence. For specification checks or to arrange supply, contact Metav Werkzeuge to discuss the Metav IndustryLine holder M317.205 and its integration into calibration routines Technical data Article number: M317.205 GTIN: 4054469127514 Category: End masses Description: End gauge holder Manufacturer: Metav IndustryLine Weight: 0.4 kg Facts Measurement range: 0–200 mm Clamping range: 0–200 mm Cross-section: 30 x 5 mm (≤300 mm) Customs tariff number: 90173000 Special features Very robust construction Suitable for precision measurement and calibration of instruments Profile geometry for stable clamping SKU: M317.205 FAQ What is the intended application of this holder? The holder is intended for securing end gauges during precision measurement and calibration tasks; the Metav IndustryLine end gauge holder 0–200 mm (M317.205) is suitable for metrology benches and workshop inspection points. What are the measurement and clamping ranges? Measurement and clamping ranges are 0–200 mm, providing coverage for standard length checks and calibration operations. Which profile does the holder use and why does it matter? The profile is 30 x 5 mm for sizes up to 300 mm; this geometry ensures stable support and consistent contact conditions that improve repeatability. Is the device heavy to handle during routine checks? Weighing 0.4 kg, the holder is lightweight enough for easy positioning while remaining sufficiently rigid for reliable clamping. Can this holder be integrated into existing calibration setups? Yes. The M317.205 is designed for straightforward integration with end measures and typical calibration fixtures used in quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Gauge Extension and Connector For 10mm Gauge With Extensions 10/15/20/25/30mm - Metav IndustryLine
Take advantage of the 20 mm exchange insert and the modular 10–30 mm extension options to adapt existing gauge block sets quickly; the connector reduces stock variety while keeping measurement chains precise — order the gauge block extension and connector directly via Metav Werkzeuge or ask the consultants for configuration advice. Gauge block extension and connector — 20 mm exchange insert for modular gauge blocks (Metav IndustryLine) The Gauge block extension and connector is a compact modular insert designed to extend and link standard gauge blocks, allowing flexible assembly of length chains for calibration, workshop measurement and inspection tasks. Exchange insert 20 mm Compatible with 10 mm gauge blocks Extensions available 10–30 mm Extend measurement range without large blocks The modular insert delivers a straightforward way to increase the effective measuring length of a gauge block set. Fitted as a 20 mm exchange insert, the component mates with a 10 mm gauge block and accepts dedicated extensions, enabling composite stacks without resorting to larger, heavier blocks. This approach improves stock efficiency and simplifies logistics in the inspection room: instead of holding multiple large blocks, technicians keep a small set of inserts and extensions, which streamlines set-up and reduces handling time while maintaining traceable lengths. Maintain repeatable joins and stable measurement chains A precisely machined mating piece ensures reproducible contact between linked blocks, so each assembled length remains consistent across repeated measurements. The component’s design prioritises precision and mechanical stability, reducing hinge or play where blocks meet. For routine calibrations and workshop verifications, this results in lower measurement uncertainty and faster throughput. The lightweight nature of the insert supports easy positioning in a stack while preserving the repeatability expected from gauge block systems. Ideal for calibration benches and flexible workshop use Designed to complement standard gauge block practices, the connector suits metrology benches, quality-control stations and toolrooms where variable lengths must be composed quickly. The set-up supports common tasks such as building reference lengths, checking fixtures and aligning assemblies. With extensions offered in 10, 15, 20, 25 and 30 mm, the accessory provides practical granularity for fine adjustments and makes it simpler to achieve target dimensions without custom machining. Contact Metav Werkzeuge in Emmerich for technical advice on configuring the 20 mm exchange insert and to confirm stock availability and delivery options Technical data Article number: M319.200.S GTIN: 4054469158150 Weight: 0.05 kg ECLASS: 21170108 ETIM: EC002219 Customs tariff: 90173000 Facts Exchange insert size: 20 mm Base compatibility: 10 mm gauge block Extension sizes: 10 mm, 15 mm, 20 mm, 25 mm, 30 mm Category: Gauge blocks (Endmasse) Special features Exchange-end measure 20 mm Mating piece for 10 mm gauge block with extensions Modular connector for assembling length chains Compact, lightweight accessory for calibration and workshop use FAQ What is the primary function of the connector? The connector serves as a modular insert to extend and link gauge blocks, enabling composite lengths using a 20 mm exchange insert and the available extensions. Which sizes are available for the extensions? Extensions are supplied in 10 mm, 15 mm, 20 mm, 25 mm and 30 mm to provide fine-grained length composition options for gauge block stacks. Is the component compatible with standard 10 mm gauge blocks? Yes, the mating piece is designed specifically for use with a 10 mm gauge block and works as an adaptable linkage within gauge block sets. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21 mm Gauge Block End Standard Grade 1, DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Take advantage of a certified measurement reference that combines Grade 1 accuracy, a robust hardened special steel construction and a compact cross‑section for reliable shop‑floor and laboratory checks; order the gauge directly via Metav Werkzeuge or request advice from our consultants. End gauge 21 mm (DIN EN ISO 3650) – Grade 1, Metav IndustryLine The End gauge 21 mm is a Grade 1 precision reference for dimensional verification and master checks in inspection, calibration and production control environments. Grade 1 tolerance to DIN EN ISO 3650 Hardened special steel construction Exact nominal size 21 mm Compact cross-section 35x9 mm for >10.1 mm sizes Certified tolerance for dependable measurement control The device is manufactured to DIN EN ISO 3650 and certified as Grade 1, which provides a defined tolerance band suitable for high‑reliability verification tasks. As a dimensional reference with a 21 mm nominal size, this gauge supports traceable inspection routines and helps to reduce measurement uncertainty in repetitive checks. Using a standardised end measure simplifies compliance documentation and ensures consistent decision limits across production and quality control processes. Durable construction that eases handling and storage Constructed from hardened special steel, the gauge delivers long service life and resistance to wear under regular use. For the 21 mm nominal size the specified cross‑section is 35x9 mm, which balances stiffness and ergonomics: the profile resists bending while remaining easy to position during checks. The compact mass of 0.054 kg keeps handling straightforward and reduces operator fatigue, allowing fast placement and repeatable seating on mating surfaces without unnecessary bulk. Practical integration into quality workflows and inventory This master measure is ideal for bench calibration, incoming inspection and routine shop‑floor verification where a reliable reference is required. Supplied as a standard Grade 1 end measure, it integrates with existing gauge sets and inspection plans and is traceable via the item identifier M319.210.1. Specification clarity—nominal size, material and compliance—helps to streamline procurement and inventory management while supporting regular conformity checks in production. For Grade 1 accuracy and robust construction, contact Metav Werkzeuge to secure the M319.210.1 end gauge and discuss delivery or calibration options through our Emmerich quality hub Technical Data Article number: M319.210.1 GTIN: 4054469132013 Tariff number: 90173000 Facts Nominal size: 21 mm Cross-section: 35x9 mm (applies for sizes >10.1 mm) Weight: 0.054 kg Tolerance grade: Grade 1 Standard: DIN EN ISO 3650 Special features Material: Special steel, hardened Category: End gauge Intended use: Dimensional verification and master reference FAQ What tolerance standard does this end gauge conform to? The end gauge conforms to DIN EN ISO 3650 and is manufactured to Grade 1 tolerance. What material is the gauge made from? The gauge is made from hardened special steel, chosen for wear resistance and long service life. Which cross‑section applies to this 21 mm gauge? For the 21 mm nominal dimension the applicable cross‑section is 35x9 mm, corresponding to the specification for sizes above 10.1 mm. What is the article identifier for ordering and inventory? The article is listed as M319.210.1, which can be used for procurement, stock control and documentation. Is a calibration certificate included with the product data provided? No specific calibration certificate is stated in the supplied data; calibration status is not specified for this item Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21 mm Gauge Block, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Combine DIN EN ISO 3650 Grade 0 accuracy with hardened special steel construction and a compact 21 mm nominal length for a dependable reference standard; these features support reproducible measurements in both workshop and calibration environments. Order the single gauge block directly via Metav Werkzeuge or ask our consultants if needed. Single gauge block 21 mm — DIN EN ISO 3650 Grade 0, hardened special steel (Metav IndustryLine) The Single gauge block 21 mm serves as a high-precision reference for calibration and measurement tasks, ideal for forming gauge stacks and checking dimensional standards in workshop and inspection settings. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Nominal length 21 mm for precision stacks Cross-section 35×9 mm for rigid handling Traceable accuracy for routine and lab use The block is manufactured to DIN EN ISO 3650 and specified as Grade 0, providing a clearly defined tolerance class for reference measurements. As a compact reference element with a 21 mm nominal length, it is suitable for assembling gauge stacks or checking the setting of measuring instruments. The standard conformity ensures that the deviation band and manufacturing tolerances meet recognised metrological criteria, which supports consistent, comparable results across instruments and shifts in production. Robust construction that preserves geometry Made from hardened special steel, the block resists wear and maintains its geometry under regular handling. The larger cross-section specified for this size—35×9 mm—delivers increased stiffness compared with smaller-section blocks, reducing the risk of bending during placement and improving repeatability when used in stacks. This rigidity translates into fewer re-measurements and a lower incidence of handling-induced error, which is particularly relevant in busy shop-floor situations. Easy integration into measurement routines Designed as a single end standard, the block integrates smoothly into existing calibration and measurement workflows. It is suitable for building gauge stacks, verifying micrometer and caliper settings, and serving as a reference for height gauges and other dimensional equipment. The compact nominal length aids manoeuvrability when assembling stacks or measuring small components, while the standardised form factor simplifies compatibility with holders and accessories commonly used in inspection labs. Reliability backed by a focused supplier Metav IndustryLine positions this block as a workshop-proven reference that reflects the company’s focus on accessible precision. The construct and compliance with international norms make it a practical choice for quality departments and toolrooms that require dependable reference standards without excessive logistical overhead. Metav’s distribution and quality processes support consistent supply and clear product identification for traceable inventory management. Contact Metav Werkzeuge in Emmerich to discuss the Metav IndustryLine 21 mm gauge block (SKU M319.210.0) and confirm its suitability for specific calibration routines; our consultants will advise on delivery and certification options. Technical Data Article number: M319.210.0 GTIN: 4054469132006 Category: Endmasse (gauge blocks) Norm: DIN EN ISO 3650 Facts Nominal size: 21 mm Weight: 0.054 kg Cross-section: 35×9 mm Customs tariff number: 90173000 Special features Material: special steel, hardened Grade: 0 Application: reference standard for gauge stacks and dimensional checks FAQ What level of accuracy does this gauge block offer? The Metav IndustryLine single gauge block 21 mm conforms to DIN EN ISO 3650 Grade 0, providing the specified tolerance class required for traceable reference measurements. Which material is used for this block and why does it matter? Manufactured from hardened special steel, the block offers excellent wear resistance and dimensional stability, which preserves measurement geometry during regular workshop use. Can this block be used in gauge stacks and for calibrating other instruments? Yes. The 21 mm nominal length and standardised form make the block suitable for building gauge stacks and for checking micrometer, caliper and height-gauge settings. How does the cross-section affect handling and repeatability? The 35×9 mm cross-section for sizes above 10.1 mm increases stiffness and reduces bending, improving handling repeatability and lowering the chance of handling-induced measurement error. Is this gauge block suitable for both workshop and inspection-laboratory environments? Yes, the combination of DIN EN ISO 3650 conformity and hardened construction makes the block appropriate for workshop calibration tasks and for use as a traceable reference in inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21.5 mm Gauge Block Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of DIN EN ISO 3650 Grade 0 accuracy combined with a hardened special‑steel construction for a reproducible measurement reference. The compact 21.5 mm nominal size and low mass support easy handling and stable integration into gauge sets. Order the item directly via Metav Werkzeuge or consult our specialists for application advice. Single end gauge 21.5 mm — Grade 0, hardened special steel (Metav IndustryLine) Single end gauge 21.5 mm — a precision reference for inspection and gauge sets DIN EN ISO 3650 grade 0 accuracy Hardened special‑steel construction Nominal size 21.5 mm precision Compact, low‑mass design 0.056 kg Precision where repeatable reference matters The DIN EN ISO 3650 conformity and Grade 0 classification ensure this single end gauge functions as a reliable measurement reference in quality control. Manufactured from hardened special steel, the component offers stability against typical handling and routine use. The nominal 21.5 mm dimension is produced to the tolerance band defined by the standard, which supports consistent comparison measurements and reduces uncertainty when verifying other gauges or setting instruments. This section emphasises the measurable assurance that a standard‑conforming end gauge provides to inspection workflows. Robust construction for dependable performance A hardened special‑steel body gives the gauge mechanical resistance that promotes long service life and reproducible contact conditions during measurement. The compact geometry and low mass (0.056 kg) make handling straightforward while maintaining surface integrity under normal use; the cross‑section options noted for similar sizes assist in resisting bending during insertion into fixtures. In practice, the construction translates into fewer retests and faster throughput in incoming inspection or production monitoring, delivering tangible operational efficiency with minimal compromise on accuracy. Where this gauge brings value in the workshop and lab As a single measurement standard, this end gauge fits naturally into gauge sets, inspection benches and reference equipment in manufacturing and laboratory environments. It supports routine verification tasks and can be used as a comparative master for setting calipers or checking fixture dimensions. The compact size makes it suitable for small‑part inspection while maintaining the conformity expected in industrial metrology. For procurement and inventory management, the article is listed as M319.215.0 under the Metav IndustryLine range, simplifying identification within structured quality systems. Contact Metav Werkzeuge to request technical details or to secure the Metav IndustryLine M319.215.0 end gauge with traceable standards for integration into inspection routines Technical data Article number: M319.215.0 GTIN: 4054469132020 Nominal size: 21.5 mm Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 0 Weight: 0.056 kg Tariff number: 90173000 Facts Nominal size: 21.5 mm Weight: 0.056 kg Cross‑section: up to 10 mm — 30 x 9 mm; from 10.1 mm — 35 x 9 mm Category: End gauges Special features Hardened special‑steel construction Conforms to DIN EN ISO 3650 Grade 0 tolerance class Single end gauge for gauge sets and inspection Category path: Measuring instruments > End gauges FAQ What tolerance class does this gauge meet? The Single end gauge 21.5 mm meets DIN EN ISO 3650 Grade 0 requirements; it is supplied as the Metav IndustryLine item M319.215.0. What material is the gauge made from? This gauge is manufactured from special steel, hardened to provide the required surface and dimensional stability for routine reference tasks. Where is this end gauge typically used? It is intended for use in inspection benches, gauge sets and incoming quality control where a compact, high‑accuracy reference is required. Can this gauge be integrated into an existing gauge set? Yes. The single end gauge M319.215.0 is dimensioned for straightforward inclusion in gauge sets and for use as a comparative master on workshop and laboratory instruments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21.5mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
The combination of ceramic construction, Grade 1 accuracy (DIN 861/1) and compact 21.5 mm nominal length delivers a stable, low‑expansion reference for workshop and inspection tasks; its light weight and hard surface reduce wear and handling error. Order the Ceramic gauge block 21.5 mm directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 21.5 mm — Grade 1 DIN 861/1 (Metav IndustryLine) A Ceramic gauge block 21.5 mm designed as a compact length standard for precision inspection, calibration and master-setting in workshop and quality‑control environments. Ceramic material for thermal stability Grade 1 accuracy to DIN 861/1 Compact 21.5 mm nominal length Precision where small dimensions matter This compact length standard offers a reproducible reference for fine measurements and setting tasks. The combination of 21.5 mm nominal size and Grade 1 production quality according to DIN 861/1 makes the block suitable as a master for routine calibration and comparative checks. As a small-format gauge, it sits in the micro class of measuring standards (max range 10–100 mm), which balances stiffness and accessibility for tasks such as fixture set‑up, gauge stacking and component inspection. The hardened, stable surface provides a reliable datum that reduces cumulative error in assembly and measurement chains. Material advantages that improve repeatability Made from ceramic, the end standard benefits from inherently low thermal expansion and excellent wear resistance, improving measurement stability across typical shop temperature fluctuations. The hard ceramic surface resists surface deformation and keeps mating faces flat over many cycles, which reduces drift in calibration intervals and extends service life compared with softer materials. Lightweight construction (approx. 44 g) also minimises handling fatigue during frequent use and supports rapid positioning in measurement routines. Practical use, traceability and integration Supplied as a discrete end standard, this item is straightforward to integrate into inspection benches and toolrooms as a master reference for comparative checks and gauge block stacks. The compact form factor simplifies storage and transport between workstations while the Grade 1 classification supports consistent results in quality control processes. For traceability, the product is identified by its SKU and GTIN, enabling straightforward inventory management and documentation in procurement and calibration records. For procurement and calibration support of Metav IndustryLine ceramic gauge blocks, contact Metav Werkzeuge in Emmerich for tailored technical advice and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M324.021.5 GTIN: 4054469143316 Category: Gauge blocks (Endmasse) Facts Nominal length: 21.5 mm Weight: 0.044 kg Quality grade: 1 (DIN 861/1) Tariff code: 90173000 Special features Material: Ceramic Label: Keramik-Endmaß 21,5 mm, Güte 1 DIN 861/1 Brand: Metav IndustryLine FAQ What accuracy class does this gauge block meet? The Ceramic gauge block 21.5 mm meets Grade 1 in accordance with DIN 861/1, making it suitable as a workshop and inspection reference standard. Is the ceramic material suitable for shop use and stacking? Yes. The ceramic construction of the Metav IndustryLine gauge block gives low thermal expansion and strong wear resistance, which supports frequent stacking and comparative measurements without rapid surface degradation. How is the product identified for procurement and inventory? The item is listed as SKU M324.021.5 and GTIN 4054469143316, enabling direct ordering and traceability of the Ceramic gauge block 21.5 mm (Metav IndustryLine). Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21.5mm Gauge Block, DIN EN ISO 3650 Grade 1, Hardened Special Steel - Metav IndustryLine
Take advantage of DIN EN ISO 3650 Grade 1 accuracy, a precise 21.5 mm nominal size and a hardened special steel construction to secure dependable reference measurements and repeatable inspection results. Order the end gauge directly via Metav Werkzeuge or ask the consultants for application advice. End Gauge 21.5 mm (DIN EN ISO 3650) — Grade 1, Hardened Special Steel The End Gauge 21.5 mm serves as a calibrated reference standard for inspection, setting and verification tasks in metrology benches and production quality control. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 21.5 mm reference standard Precision that defines tolerances The gauge is produced to DIN EN ISO 3650, Grade 1, delivering a reliable reference for acceptance testing and routine inspection tasks. With a nominal size of 21.5 mm, the component provides a tight reference point for plug, bore and limit-gauge comparisons, making it suitable where dimensional certainty is required. The standardised specification ensures compatibility with international inspection routines and supports traceable documentation when incorporated into in-house calibration procedures. This focus on measurable conformity reduces uncertainty in process control and improves decision-making in production. Built for repeatability and robust handling Manufactured from hardened special steel, the item resists wear and maintains its geometry across repeated use, supporting stable comparative checks over time. The compact mass and defined cross-section facilitate secure gripping and minimise thermal and tactile distortion during handling. These mechanical properties contribute to consistent measurement cycles and lower risk of accidental deformation, which is essential for a reference piece intended for frequent use in workshop and laboratory environments. Designed as a practical shop-floor standard, the gauge combines durability with simple usability to keep inspection routines efficient. Integration into quality workflows and documentation As a Grade 1 reference, the gauge fits seamlessly into existing quality assurance systems for receiving inspection, first-article verification and routine calibration traces. The solid construction and normative conformity allow it to serve as a transfer standard for cross-checking instruments and fixtures. When incorporated into documented inspection plans, the component supports repeatable acceptance criteria and enhances comparability between shifts or sites. In combination with Metav’s advisory services, this reference standard becomes part of a pragmatic supply chain approach that promotes accessible, professional metrology across workshops and small-scale production. For reliable grade‑1 reference standards and professional advice, contact Metav Werkzeuge to arrange supply of the M319.215.1 end gauge or speak to a consultant on technical suitability. Technical Data Article number: M319.215.1 GTIN: 4054469132037 Label: End Gauge 21.5 mm, DIN ISO 3650, Grade 1 Core measurements Nominal size: 21.5 mm Weight: 0.056 kg Cross-section: up to 10 mm 30x9 mm; from 10.1 mm 35x9 mm Tariff code: 90173000 Materials & standards Material: Special steel, hardened Standard: DIN EN ISO 3650 Accuracy grade: Grade 1 FAQ What tolerance class does this gauge meet? The gauge is manufactured to DIN EN ISO 3650 Grade 1, providing a high level of dimensional conformity suitable for precision inspection tasks. Is the nominal size 21.5 mm traceable for calibration purposes? Yes, the 21.5 mm nominal dimension is an industry reference size and can be used as a traceable reference within internal calibration schemes and inspection plans. What material is used and how does it affect durability? The component is made from hardened special steel, chosen for wear resistance and long-term stability during repeated comparative measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
21mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Reliable Grade 1 accuracy combined with the thermal stability of ceramic provides a compact, wear‑resistant reference for precise length setting and quality control; select the 21 mm gauge block for repeatable workshop calibration tasks. Order the ceramic gauge block directly via Metav Werkzeuge or consult the specialists for application advice. Ceramic gauge block 21 mm, Grade 1 DIN 861/1 — Metav IndustryLine The Ceramic gauge block 21 mm, Grade 1 DIN 861/1 serves as a compact, thermally stable length reference for workshop measurement, calibration tasks and assembly checks. Thermally stable ceramic reference Grade 1 accuracy (DIN 861/1) Compact 21 mm nominal length Stable reference for repeatable measurements The Grade 1 designation in accordance with DIN 861/1 marks this slip gauge as a reliable length reference suitable for workshop calibration and comparative measurement workflows. The Grade 1 tolerance ensures consistent performance when setting gauges, verifying micrometre adjustments or establishing short reference standards on the shop floor. As a compact reference, the 21 mm nominal dimension reduces handling error and supports quick, accurate comparisons without extensive set‑up time. Material benefits that support metrology routines Made from ceramic, the block offers low thermal expansion and high surface hardness compared with many metallic references. These properties reduce length changes due to temperature shifts in normal workshop conditions and enhance wear resistance during repeated use. The non‑corroding nature of the material helps preserve surface integrity over time, contributing to a stable reference that maintains its geometry under typical handling and storage conditions. Appropriate handling—cleaning with a soft cloth and protecting the faces from impact—will prolong service life and measurement reliability. Practical integration and handling in the workshop The compact 21 mm format and light mass (approx. 0.042 kg) make this reference simple to incorporate into daily procedures, whether used alone for single‑point checks or as part of a set of slip gauges. The block is suitable for establishing short reference lengths, setting comparators and calibrating small instruments. Its ceramic composition also minimises magnetic interaction and surface oxidation, simplifying maintenance routines. For traceability and logistic integration the product is delivered with standard identification (GTIN) and clear labelling to assist inventory management and quality documentation. Contact Metav Werkzeuge in Emmerich for supply and technical advice — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M324.021 GTIN: 4054469143309 ECLASS: 21170108 Category: Gauge blocks Label: Ceramic gauge block 21 mm, Grade 1 DIN 861/1 Net weight: 0.042 kg Tariff code: 90173000 Core specifications Nominal length: 21 mm Grade: 1 Weight: 0.042 kg Materials & features Material: Ceramic Standard: DIN 861/1 Compact reference dimension Wear‑resistant surface FAQ What level of accuracy does this gauge block provide? The Ceramic gauge block 21 mm, Grade 1 DIN 861/1 conforms to Grade 1 requirements of DIN 861/1 and is intended as a high‑precision workshop reference for repeatable length comparisons. For which tasks is this gauge block suitable? This Metav IndustryLine ceramic block is suitable for precision length setting, short‑range calibration, assembly checks and integration into gauge block sets for comparative measurements. What advantages does ceramic offer over steel in a gauge block? Ceramic provides low thermal expansion, strong surface hardness and resistance to corrosion, which help to maintain dimensional stability and reduce maintenance compared with many steel references. Can the block be used together with standard gauge block sets? Yes; the 21 mm nominal dimension and standard grading make it compatible as a reference element within gauge block stacks and comparative measurement procedures. How should the gauge block be handled and stored? Handle with care to avoid impact on measuring faces; keep clean and dry, and store the block in a protective environment to preserve surface quality and measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22 mm Gauge Block, Hardened Special Steel, Grade 0, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of a Grade 0 reference gauge made from hardened special steel with a compact cross-section for stable handling; this combination ensures dependable reference measurements and long service life. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Single end gauge 22 mm — End gauge, Grade 0, DIN EN ISO 3650 (Metav IndustryLine) The Single end gauge 22 mm is a hardened precision reference for calibration and verification tasks in workshops and inspection labs, compliant with DIN EN ISO 3650 for reliable Go/No‑Go checking Grade 0 accuracy per DIN EN ISO 3650 Hardened special steel construction Compact cross-section 35 x 9 mm for stability Traceable identification GTIN 4054469132044 Measurable accuracy that reduces inspection uncertainty This reference standard delivers Grade 0 tolerance according to DIN EN ISO 3650, providing a clear, objective basis for pass/fail evaluations and gauge block sets. The 22 mm nominal size is manufactured to tight dimensional limits, making the item suitable as a workshop reference for incoming inspection and routine quality checks. By using a standardised end gauge, measurement deviations arising from subjective assessment are minimised, which supports process stability and repeatable quality documentation. Robust construction for repeatable performance Manufactured from hardened special steel, the gauge resists wear and maintains its datum geometry during repeated contact checks. The geometry for sizes above 10.1 mm uses a 35 x 9 mm cross‑section, providing increased profile stiffness compared with very slim designs; this aids handling and reduces bending under typical workshop forces. The construction therefore extends service intervals and keeps maintenance predictable, which benefits production planning and reduces downtime. Practical integration into calibration workflows The item is delivered as a single‑piece end gauge with clear identification M319.220.0 and GTIN 4054469132044, simplifying inventory and traceability in calibration records. Its nominal 22 mm dimension fits common gauge block sets and mechanical fixtures used in metrology benches and inspection jigs. Where traceable reference measurements are required, this hardened reference serves as a compact, easily storable standard that integrates with existing procedures without the need for specialised holding devices. Clear benefits for workshop and inspection teams As a compact reference standard, the gauge supports rapid Go/No‑Go assessments and spot checks on machined components and tooling. The combination of precision manufacturing and a stable cross‑section reduces the influence of handling on results, so teams can rely on consistent outcomes during serial checks or setup operations. The small weight and compact form also simplify storage and handling while preserving the reference surface integrity. Contact Metav Werkzeuge for expert advice on using the Metav IndustryLine single end gauge M319.220.0 as a dependable Grade 0 reference in measurement and inspection workflows Technical Data Article number: M319.220.0 GTIN: 4054469132044 Nominal size: 22 mm Weight: 0.058 kg Standard: DIN EN ISO 3650 Grade: 0 Facts Cross-section (≤ 10 mm): 30 x 9 mm Cross-section (> 10.1 mm): 35 x 9 mm Tariff number: 90173000 Category: End gauges / End masses Special features Material: hardened special steel Application: reference gauge for Go/No‑Go and calibration checks Identification: SKU M319.220.0, GTIN 4054469132044 FAQ What tolerance class does this end gauge have? The Single end gauge 22 mm is manufactured to Grade 0 tolerance in accordance with DIN EN ISO 3650, providing precise limits for reference checks. Which material is used for the gauge and why is it important? The gauge is made from hardened special steel, chosen for wear resistance and dimensional stability so the reference surface remains reliable through repeated use. Can this gauge be used with existing gauge block sets? Yes, the 22 mm nominal size and standardised geometry make it compatible with typical gauge block arrangements and inspection fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22 mm Go Gauge, DIN EN ISO 3650 Grade 1, Hardened Special Steel - Metav IndustryLine
Take advantage of DIN EN ISO 3650 conformity, Grade 1 accuracy and hardened special steel for reliable reference measurements; order the gauge block directly via Metav Werkzeuge or request technical advice from our consultants. Gauge block 22 mm (DIN EN ISO 3650, Grade 1) by Metav IndustryLine A gauge block 22 mm designed as a traceable reference for calibration, inspection and workshop dimensional checks, suited to metrology labs and tool rooms. Manufactured to DIN EN ISO 3650 Grade 1 accuracy Hardened special steel for long service life Compact 35 x 9 mm cross-section for stability GTIN-coded for inventory and traceability Precision reference for reliable inspection results This reference piece is manufactured to DIN EN ISO 3650 and rated Grade 1, providing a stable dimensional standard for routine calibration and verification tasks. As a compact reference of 22 mm, the block serves as a direct standard for setting and checking measuring instruments. The international standard ensures interchangeability across laboratories and supports a clear calibration chain, which benefits quality assurance procedures and reduces measurement uncertainty in production control. Durable construction that sustains accuracy Made from hardened special steel, the block combines surface wear resistance with the rigidity required for repeated contact during comparison and calibration. The cross-section for this nominal size is 35 x 9 mm, offering a favourable contact area that minimises tilting and thermal mass effects in typical bench environments. The modest mass and compact footprint facilitate secure clamping or placement on gauge plates without compromising the dimensional stability that reference measurements demand. Practical benefits for everyday metrology As a workshop and laboratory standard, the block simplifies the process of checking micrometers, calipers and gauge sets by providing a single, stable reference dimension. The robust finishing and conformity to established standards reduce the frequency of corrective adjustments and help maintain consistent inspection throughput. Where traceability and repeatability matter, a standard-compliant reference reduces process variation and supports documented quality workflows. Suitable applications and professional contexts The reference is intended for use in inspection departments, tool rooms, maintenance shops and calibration facilities where a compact gauge block is required for routine checks and instrument setting. Its Grade 1 classification makes it well suited to general industrial metrology tasks that require a reliable reference without the need for laboratory-grade sub-micron resolution. Compatibility with standard gauge sets and fixture designs ensures straightforward integration into existing measurement routines. Contact Metav Werkzeuge for a technical quotation or to discuss integration of this Metav IndustryLine gauge block 22 mm into calibration workflows — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M319.220.1 GTIN: 4054469132051 Category: Endmasse Facts Nominal size: 22 mm Weight: 0.058 kg Cross-section: bis 10 mm → 30 x 9 mm; ab 10,1 mm → 35 x 9 mm Tariff number: 90173000 Special features Material: Special steel, hardened Accuracy: Grade 1 (DIN EN ISO 3650) Suitable for calibration and inspection workflows SKU: M319.220.1 FAQ What standard does this gauge block comply with? The gauge block complies with DIN EN ISO 3650 and is supplied as a Grade 1 reference suitable for general industrial metrology. Is this 22 mm gauge block suited to workshop calibration? Yes; the 22 mm block from Metav IndustryLine is intended for workshop and inspection use where Grade 1 accuracy provides a reliable reference for setting and verifying measuring instruments. What material is used and how does it affect longevity? The block is made from hardened special steel, which improves wear resistance and preserves dimensional stability during repeated use. How does the cross-section influence handling and stability? The applicable cross-section for this size is 35 x 9 mm, offering increased contact area and rigidity that helps maintain flatness and reduces tilting during comparisons. Can the block be used with existing gauge sets and fixtures? Yes; the block's dimensions and conformity to DIN EN ISO 3650 make it compatible with standard gauge holders and comparison benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22.5 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a compact reference that combines ceramic stability, Grade 1 conformity and a precise 22.5 mm nominal length for reliable, repeatable checks in inspection and calibration workflows; order directly via Metav Werkzeuge or consult our specialists for application support. Ceramic End Gauge 22.5 mm, Grade 1 (DIN 861/1) by Metav IndustryLine The Ceramic End Gauge 22.5 mm, Grade 1 (DIN 861/1) is a hardened, dimensionally stable reference intended for traceable dimensional checks and short-range calibration tasks in metrology and quality assurance environments. Ceramic material with excellent wear resistance Grade 1 accuracy according to DIN 861/1 Compact 22.5 mm reference for calibrations Consistent accuracy for routine quality control This compact reference block delivers a high degree of measurement certainty thanks to its Grade 1 tolerance class as defined in DIN 861/1. The combination of a stable ceramic body and a short nominal length reduces the influence of thermal drift and handling variability, which translates into fewer measurement deviations during repetitive checks. For workshop environments and laboratory benches alike, this stability supports faster decision-making in go/no-go inspections and in-process verification. Material advantages and long-term reliability Manufactured from technical ceramic, the gauge offers outstanding wear resistance and low coefficient of thermal expansion compared with many metallic gauges. These material properties keep the reference dimension stable over time and under typical shop‑floor temperature fluctuations, helping to prolong the interval between replacements. The light mass and compact footprint make the item easy to handle and position, while the high surface hardness preserves the measuring faces against abrasion. Practical use and compatibility with inspection procedures As a fixed-length end gauge the part functions as a reference standard for tactile comparators, gauge blocks and quick verification tools. Its nominal 22.5 mm size is suited to short-range checks and complements sets of standard lengths without occupying excessive bench space. In routine metrology procedures, the gauge can be integrated into inspection jigs or used as a verified master for caliper and micrometer spot checks, supporting efficient workflows and clear pass/fail criteria. For precision reference standards and expert application advice, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm specifications and supply options. Technical data SKU: M324.022.5 GTIN: 4054469143330 Tariff number: 90173000 Facts Nominal size: 22.5 mm Weight: 0.048 kg Grade: 1 (DIN 861/1) Special features Material: Ceramic Category: End gauge Manufacturer: Metav IndustryLine FAQ What level of accuracy does this end gauge provide? The end gauge conforms to Grade 1 tolerance as specified in DIN 861/1, providing a precision level suitable for routine laboratory and workshop reference tasks. Is the material suitable for harsh workshop use? Yes, the ceramic construction offers high wear resistance and low thermal expansion, making the gauge durable under normal inspection-room and shop-floor conditions. Can the gauge be used to verify calipers and micrometers? The gauge is intended as a short-range reference standard and is well suited for spot checks and verification of calipers, micrometers and comparator setups. What is the supplier and product identification? The item is supplied as Ceramic End Gauge 22.5 mm, Grade 1 (DIN 861/1), SKU M324.022.5, and is part of the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com