End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
800mm Gauge Block Set Grade 1, DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Benefit from a combination of DIN EN ISO 3650 conformity, a Grade 1 tolerance and a hardened special‑steel construction for stable, reproducible length standards; order the gauge directly via Metav Werkzeuge or request technical advice from our consultants. End gauge M320.800.1 — 800 mm Grade 1 end measure (DIN EN ISO 3650) A Metav IndustryLine End gauge 800 mm designed as a robust length standard for calibration and dimensional control in inspection and production environments. Grade 1 tolerance to DIN EN ISO 3650 Hardened special steel for long-term stability 800 mm nominal length, 35×9 mm cross-section Robust 3.2 kg construction for workshop use Reproducible accuracy for routine and audit measurements The M320.800.1 end gauge is specified to Grade 1, complying with DIN EN ISO 3650, which makes it suitable where consistent, repeatable length standards are required. As an 800 mm nominal standard, it provides a clear reference for comparative checks and functional tests, reducing uncertainty during verification tasks. The compliance with this international norm supports traceable practices in quality assurance and simplifies documentation for internal audits or external certification activities. Robust design that reduces handling and measurement errors Constructed from hardened special steel, the gauge combines surface hardness with dimensional stability to withstand regular workshop use without rapid wear. The rectangular cross‑section of 35×9 mm gives a favourable stiffness-to-weight ratio, while the total mass of 3.2 kg helps the standard remain stable during contact measurements. These physical characteristics lower the risk of deflection during handling and ensure that the reference dimension remains consistent across repeated comparisons, supporting faster inspection cycles and fewer rework loops. Suited to larger assemblies and integration into calibration workflows Classified in the Large range (500–1,000 mm), this end standard bridges the gap between bench‑scale artefacts and long‑bar measures used in heavy machining or assembly halls. It is particularly useful for fixture setting, end‑to‑end checks on housings and for verifying machine zero positions where a long, rigid reference is needed. Backed by Metav’s product range and distribution in Emmerich, the gauge integrates into broader quality concepts — enabling accessible precision without the need for multiple specialised suppliers and supporting dependable supply chains for workshops and distributors. For procurement or tailored technical advice on the M320.800.1 end gauge and its applications, contact Metav Werkzeuge directly for a competent recommendation and ordering support at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: M320.800.1 GTIN: 4054469132570 Designation: End gauge 800 mm, DIN EN ISO 3650, Grade 1 Manufacturer: Metav IndustryLine Core specifications Nominal length: 800 mm Cross-section: 35×9 mm Weight: 3.2 kg Tolerance grade: 1 Tariff number: 90173000 ECLASS: 21170108 Materials & standards Material: Special steel, hardened Standard: DIN EN ISO 3650 Application: Length standard for calibration and inspection Category: Large range (500–1,000 mm) Images: m3201250-main.jpg, m3201250-detail.jpg FAQ What tolerance class does this end gauge follow? The M320.800.1 is manufactured to Grade 1 tolerances in accordance with DIN EN ISO 3650, providing a reproducible reference for length checks. Is the material suitable for frequent workshop use? Yes, the end gauge is made from hardened special steel, offering improved wear resistance and dimensional stability for regular inspection and set‑up tasks. For which applications is an 800 mm end gauge most suitable? An 800 mm length is ideal for fixture setting, verifying machine positions and comparative length checks on medium to large assemblies within the Large range (500–1,000 mm). Does the product include a calibration certificate? A calibration certificate is not implied by the product data provided; calibration services and accompanying certificates can be arranged on request through Metav Werkzeuge. How does the cross‑section affect handling and stability? The 35×9 mm cross‑section offers a balance of stiffness and manageable mass, reducing deflection during contact measurements and simplifying handling during routine checks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Precision measurement for small assemblies benefits from the combination of Grade 1 accuracy, a thermally stable ceramic body and the compact 80 mm nominal length. Secure traceable reference checks and straightforward integration into inspection routines by ordering the gauge directly via Metav Werkzeuge or consulting the technical advisors for application guidance. Ceramic End Gauge 80 mm, Grade 1 (DIN 861/1) — Metav IndustryLine A Ceramic End Gauge 80 mm, Grade 1 (DIN 861/1) designed as a compact reference standard for dimensional inspection and machine setup in quality control and laboratory environments Grade 1 accuracy to DIN 861/1 High-stability ceramic body Compact 80 mm reference standard Non-magnetic and corrosion-resistant Stable reference for accurate dimensional inspection The Grade 1 classification in accordance with DIN 861/1 denotes a high level of dimensional fidelity for an 80 mm reference. As a compact end standard, the component offers a reliable basis for comparative measurement and machine setting tasks where reproducibility is essential. The ceramic composition reduces thermal drift compared with many metals, so readings remain consistent during short-term temperature changes commonly encountered in workshops and calibration benches. This stability supports efficient quality-control workflows and minimises rework. Practical handling and workshop integration Lightweight construction at approximately 0.153 kg and the compact 80 mm nominal length make the block easy to position on small fixtures and in tight setups. The gauge functions as a stable reference in routine inspection sequences and for transfer measurements between instruments. Compatibility with common bench procedures and the standard format simplifies inventorying and traceability within an inspection schedule. The robust material and finished faces ensure contact reliability during repeated use, supporting steady measurement throughput in production environments. Material advantages that extend service life Ceramic offers distinct functional benefits for a length standard: low thermal expansion, high surface hardness and inherent wear resistance prolong the service life of the measuring faces. In addition, the non-metallic nature provides non-magnetic behaviour and chemical resistance, which helps when parts are coated or exposed to humid conditions. These properties reduce handling precautions compared with softer materials and contribute to long-term dimensional integrity, making the gauge a cost-effective reference for precision work. For procurement or technical specification assistance on the Metav IndustryLine ceramic end gauge, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and order processing Technical data Article number: M324.080 GTIN: 4054469143453 eClass: 21170108 Tariff number: 90173000 Facts Nominal size: 80 mm Weight: 0.153 kg Grade: 1 Standard: DIN 861/1 Special features Material: Ceramic Category: End measures (Endmasse) Label: Keramik-Endmaß 80 mm, Güte 1 DIN 861/1 Brand: Metav IndustryLine FAQ What level of accuracy does Grade 1 imply for this end gauge? Grade 1 according to DIN 861/1 denotes a high level of dimensional accuracy for an 80 mm reference; the Metav IndustryLine ceramic end gauge meets the tolerances defined by that standard for Grade 1 instruments. Is the ceramic construction suitable for use with magnetic workpieces? Yes, the ceramic body is non-magnetic, so the gauge can be used in proximity to magnetic components without affecting magnetic behaviour or introducing measurement interference. How should the gauge be stored to preserve accuracy? Store the block in a clean, dry environment, protected from shocks and extreme temperature swings; keep faces free of contaminants and handle with care to maintain the measuring surfaces. Can this end gauge be used as a reference in laboratory calibration routines? The ceramic end gauge functions as a reference standard within calibration procedures and inspection chains; specific calibration status or certificates depend on the selected service and laboratory protocols. What advantages does ceramic offer compared with steel reference blocks? Ceramic provides lower thermal expansion, excellent surface hardness and corrosion resistance, which together reduce drift and surface wear during repeated contact measurements, extending usable life. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
87 Piece Gauge Block Set 1.001–100 mm Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of precise, hardened special‑steel construction and full compliance with recognised standards for reliable reference measurements; the comprehensive set and protective case ensure durable storage and safe transport. Order the set directly via Metav Werkzeuge or contact a consultant for tailored advice. Parallel gauge set M318.871 — hardened special‑steel reference set (DIN EN ISO 3650) The Parallel gauge set M318.871 serves as a workshop and calibration reference, providing precise, traceable reference lengths for quality control and tool setting across mechanical and metalworking environments Hardened special‑steel construction DIN EN ISO 3650 compliance Wide size range for workshop use Supplied in a protective case Precision reference for consistent quality control A comprehensive gauge set delivers a stable baseline for dimensional checks and calibration. The hardened special‑steel composition creates a wear‑resistant contact surface that preserves measurement integrity over time. Compliance with DIN EN ISO 3650 confirms that the set meets established tolerances for gauge blocks, which simplifies integration into existing quality processes and supports repeatable results in inspection routines. Using stable reference lengths reduces rework and supports faster setup of fixtures and jigs. Robust construction that endures workshop conditions Manufactured from heat‑treated special‑steel, the components resist surface deformation and maintain flatness under regular use. The solid material choice offers a balance between toughness and dimensional stability, so the set remains a dependable metrological reference in busy production areas. Where durability matters, the robust design reduces the frequency of replacements and contributes to lower life‑cycle costs compared with softer measuring standards. Practical handling and protected storage for reliability The set is supplied in a protective case that streamlines transport and on‑bench organisation, keeping individual gauges protected from impact and contamination. Clear labelling and systematic arrangement in the case enable rapid selection and return of gauges during inspection tasks, improving workflow efficiency. Traceability is supported by the set’s conformity to recognised standards, facilitating documentation for internal quality records and audits. Designed for everyday workshop and calibration tasks As a reference collection intended for routine use, the set covers a broad range of sizes suitable for machine‑shop measurement, fixture verification and tool setting. The combination of standard conformity and hardened surfaces means the set is appropriate for regular inspection cycles and for supporting calibration intervals within a production environment. Where precise, repeatable lengths are required, the set functions as a reliable metrological backbone. For a quote or to discuss suitability for a specific application, contact Metav Werkzeuge for personalised advice and fast supply from Emmerich. Technical data Article number: M318.871 GTIN: 4054469129907 Manufacturer: Metav IndustryLine Facts Pieces per set: 87 Net weight: 2.7 kg Tariff number: 90173000 Standard: DIN EN ISO 3650 Special features Material: Special steel, hardened Delivered in protective case for transport and storage Designation: Parallel end gauge set, DIN 861/1 Complete set for workshop reference measurements FAQ What materials are the gauges made from? The gauges are manufactured from hardened special‑steel, providing wear resistance and long‑term dimensional stability for the Parallel gauge set M318.871. Is the set suitable for routine workshop inspection? Yes, the set is designed for workshop and calibration tasks; the material and conformity to DIN EN ISO 3650 make it suitable for regular inspection and tool‑setting duties. Does the set include a case for storage and transport? The Parallel gauge set M318.871 is supplied in a protective case to safeguard components during transport and to keep gauges organised on the bench. Which standards does the set conform to? The set is specified to DIN EN ISO 3650, aligning it with recognised requirements for gauge blocks and facilitating traceable reference measurements. Can the set be used for accreditation or audit documentation? The standard conformity and stable material properties support use as a reference in internal quality records and audits; further calibration documentation can be requested as required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
87 Pieces Gauge Block Set 1.001–100 mm Hardened Special Steel DIN EN ISO 3650, Supplied in Case - Metav IndustryLine
Take advantage of a hardened special steel construction and compliance with DIN EN ISO 3650 to secure reliable reference lengths and fast set-up in production and inspection. Combine durable material with a comprehensive size range to reduce measurement conversion time and ensure reproducible results; order the set directly through Metav Werkzeuge or consult our experts for specification guidance. Parallel gauge block set M318.870 — hardened special steel, DIN EN ISO 3650 (Metav IndustryLine) The Parallel gauge block set provides stable reference lengths for precision setting, calibration and inspection tasks across machine shops and quality departments. Gauge blocks to DIN EN ISO 3650 Hardened special steel construction Comprehensive size range for precision set-up 87-piece configuration for flexible combinations Reliable material and standard conformity for repeatable measurements Constructed from special steel and delivered to the applicable standard DIN EN ISO 3650, this set offers a stable, wear-resistant reference for length measurement. The hardened surfaces reduce abrasion and preserve parallelism during repeated use, which directly improves measurement reproducibility on the shop floor. Where calibration intervals and traceability matter, the material choice and standard conformity minimise drift and support consistent inspection results over time. Practical set composition that speeds up setup and inspection The composition covers a wide span of incremental lengths so that precise stacks can be built without resorting to time-consuming shims or improvised gauges. As gauge blocks, the elements are intended for straightforward stacking and pairing to create exact reference dimensions, facilitating faster set-up of workholding and inspection fixtures. Fewer adjustments are required when a comprehensive range of end measures is available, improving throughput and reducing non-productive time in repetitive tasks. Clear benefits for quality assurance and workshop efficiency Using calibrated reference blocks as stable length standards supports a predictable quality regime: dimensional checks become quicker and deviations easier to interpret. The robust design reduces the need for frequent replacement, which lowers lifecycle disruption and helps maintain a reliable calibration baseline for incoming inspection and in-process control. For operations that depend on repeatable alignment and assembly, the set serves as a practical tool to uphold production tolerances. For DIN-compliant reference standards, choose the Metav IndustryLine gauge block set and contact Metav Werkzeuge in Emmerich for procurement and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M318.870 GTIN: 4054469129891 Manufacturer: Metav IndustryLine Facts Weight: 2.7 kg Pieces per set: 87 Customs tariff number: 90173000 Size distribution: elements covering nominal lengths from ~1.001 mm up to 100 mm Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Set type: Parallel end measures for length reference Category: End measures FAQ What accuracy class or tolerance can be expected from these gauge blocks? The Parallel gauge block set meets the dimensional and surface requirements associated with DIN EN ISO 3650, providing the reproducible reference performance expected of hardened end measures for workshop and inspection use. Are these end measures supplied calibrated? The set is supplied as a complete reference block set; calibration status is indicated per individual offer—please check the specific product data for calibration certificates where required. Which applications are most suitable for this gauge block set? This set is suited to machine shops, metrology benches and quality control where consistent length standards are needed for fixture set-up, inspection and adjustment tasks with hardened special steel benefits. Can the set be used for routine calibration of gages and instruments? Yes, the blocks serve as practical length references for routine checks and cross-verification of measuring equipment when applied in stable environmental conditions. Is the set compatible with high-volume production environments? The hardened construction and broad size range make the set appropriate for repeated use in production settings, helping to maintain measurement repeatability and reduce downtime. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
87 Pieces Precision Gauge Block Set 1,001–100 mm, Hardened Special Steel, DIN EN ISO 3650, In Case - Metav IndustryLine
Take advantage of a comprehensive 87-piece gauge set manufactured from hardened special steel and produced to DIN EN ISO 3650, providing reliable, repeatable reference measures for workshop inspection and fixture set-up; the set is supplied in a protective case for organised storage and transport. Order the set directly via Metav Werkzeuge or consult the technical team for application support. Parallel end gauge set 87/2 (87 pieces) — hardened special steel, DIN EN ISO 3650 Parallel end gauge set 87/2: a precision gauge-block style set for dimensional inspection and setting reference standards in workshop and quality environments Hardened special steel construction Conforms to DIN EN ISO 3650 Comprehensive 87-piece assortment Supplied in a protective case Durable construction for consistent reference measures Constructed from hardened special steel, the set delivers durability and wear resistance that matter in daily shop use. Conformity with DIN EN ISO 3650 ensures manufacturing tolerances and interchangeability across batches, which supports consistent results when used as reference measures for calibration, gauge setting and comparative checks. The material choice reduces the need for frequent replacement and keeps maintenance effort low, contributing to dependable long‑term performance in production and inspection routines. Wide size range for versatile workshop use The 87-piece set covers a broad sequence of sizes, permitting fine graduations and the assembly of direct lengths for setting and inspection tasks. Individual blocks may be combined to achieve required dimensions, enabling quick adaptation to measuring and fixture requirements without additional machining. This versatility supports rapid, rational workflows and shortens set-up times at inspection benches and on production machines, thereby increasing throughput and reducing idle time. Organised storage and straightforward handling Supplied in a protective case, the set is designed for orderly storage and transport while protecting individual gauges from damage. The total mass of approximately 2.7 kg keeps the kit manageable for single-person handling yet substantial enough to feel robust. Clear labelling and compartmentalisation speed the selection process and minimise handling errors, which translates into fewer measurement interruptions and steadier quality control across shifts. For procurement and tailored advice on application or set composition, contact Metav Werkzeuge—Metav IndustryLine’s specialist team is available to assist with selection and delivery via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: M318.872 GTIN: 4054469129914 Weight: 2.7 kg Pieces per set: 87 Material: Special steel, hardened Standard: DIN EN ISO 3650 Tariff number: 90173000 Facts SKU: M318.872 Category: End gauges Set: Yes Case included: Yes Special features Protective storage case for transport and organisation Mass composition: 9x1.001–1.009 / 49x1.01–1.49 / 19x0.5–9.5 / 10x10–100 Robust workshop design for frequent use FAQ What sizes are included in the set? The Parallel end gauge set 87/2 contains a staged selection of blocks covering the range indicated in the specification, arranged to allow combination into required lengths and fine increments. Is the set suitable for routine quality control in a machine shop? Yes, the set was designed for workshop and inspection use; the hardened special steel and DIN EN ISO 3650 production standard make it appropriate for routine dimensional checks and gauge setting. Does the delivery include a storage case? Yes, the set is supplied in a protective case to keep individual gauges organised and protected during transport and storage. What is the manufacturer and SKU for ordering? The kit is offered through Metav IndustryLine with SKU M318.872 and can be ordered directly from Metav Werkzeuge. Can the gauges be used as reference standards for calibration work? The gauges fulfil the DIN EN ISO 3650 standard, providing traceable production tolerances suitable for many inspection and setting tasks; for formal calibration certificates, please consult the Metav team. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
87mm Gauge Block Set Class 1 Precision 87-Piece, Steel - TECWERK
Benefit from Grade 1 tolerance and a comprehensive gauge block composition for reliable length standards; combine precision, durability and efficient workshop calibration. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. Parallelendmaßsatz Tol.-Kl.1 – steel parallel gauge block set with Grade 1 accuracy by TECWERK Parallelendmaßsatz Tol.-Kl.1 is a precision gauge block set intended for length setting and calibration tasks in workshops and metrology labs. Grade 1 accuracy for precision measurement Hardened steel construction for durability Broad size range for versatile use Compact set composition for systematic calibration Reliable precision that supports accurate measurement and process control The gauge block collection delivers Grade 1 tolerance, providing a dependable baseline for length setting, calibration and comparative measurement. Constructed from steel, the blocks offer consistent thermal behaviour and wear resistance, which reduces drift during repeated use. In practical terms, this means reduced setup time for inspection routines and fewer re-measurements, supporting leaner production processes and higher first-pass yield. The configuration enables fine incremental combinations to reach exact nominal lengths without complex machining, so calibration cycles become more efficient and reproducible. Practical design for workshop use and organised handling The set’s composition covers a wide span of standard sizes, enabling flexible stack combinations for a variety of tasks. The construction emphasises ease of use: flat, parallel faces ensure reliable wringing and stable stacks, while the material choice supports long-term dimensional stability. Such features simplify everyday operations in jobbing shops and quality departments, where repeatable length setting is crucial. The compact assortment helps to keep measurement benches tidy and reduces time spent searching for the right block, delivering tangible time savings across routine inspection workflows. Traceability, maintenance and confidence in results Using high-accuracy gauge blocks supports traceable measurement chains and consistent quality documentation. Regular comparison against reference standards maintains the set’s performance; when used and stored correctly, the blocks retain traceable accuracy over extended intervals. The robust build and familiar geometry make maintenance straightforward: cleaning, light polishing and controlled storage are the principal measures needed to preserve performance. For organisations building a reliable metrology routine, this instrument family forms a stable foundation for both incoming inspection and in-process checks, strengthening product quality and customer confidence. For a tailored recommendation or to arrange procurement through Metav Werkzeuge, please contact our specialists in Emmerich for precise assistance and local delivery options. Technical Data Article number: 2000851627NW Item label: Parallelendmaßsatz Tol.-Kl.1 87tlg.STA TECWERK Product type: Parallel gauge block set Pack unit: 1 Data Tolerance class: 1 Set composition: 9 × 1.001–1.009 mm Set composition: 49 × 1.01–1.49 mm Set composition: 19 × 0.5–9.50 mm Set composition: 10 × 10–100 mm Special features Material: STA (steel) Intended function: precision length setting and calibration Application: workshop metrology and inspection FAQ What accuracy does the set provide? The set is specified to Grade 1 tolerance, delivering high-precision length standards suitable for workshop calibration and comparative measurement. Is the material suitable for regular workshop use? Yes, the blocks are made of steel (STA), chosen for wear resistance and stable thermal behaviour under normal workshop conditions. Can the set be combined to achieve non-standard lengths? Individual blocks in the set can be wrung and stacked to form a wide range of precise nominal lengths for versatile calibration tasks. How should the blocks be maintained to preserve accuracy? Regular cleaning, careful handling and storage in the provided case preserve the blocks’ faces and maintain traceable accuracy over time. Does the set support traceability for quality records? When used in a defined calibration routine, the set can form part of a traceable measurement chain and support documented inspection procedures. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
87mm Precision Parallel Gauge Set Tolerance Class 2, 87-Piece Set - TECWERK
Take advantage of the combination of tolerance class 2 accuracy, steel construction, and a comprehensive size range for reliable shop-floor calibration and inspection. Order the parallel gauge block set directly via Metav Werkzeuge or ask our consultants if needed. Parallel gauge block set, Tolerance class 2, 87-piece (steel) – TECWERK The Parallel gauge block set serves as a high-precision reference for calibration, inspection and layout work in workshops and quality departments, designed as a compact steel block kit for metric measurement tasks. Tolerance class 2 accuracy Steel construction for stability Complete metric size coverage Suitable as calibration reference Precise reference lengths for everyday metrology The TECWERK set delivers consistent reference lengths across a broad metric range, making it suitable for routine calibration and dimensional checks. The blocks are supplied as a matched set with tolerance class 2, which defines the maximum permissible deviation and ensures comparability with common inspection standards. Because the components are produced and matched as a set, stacking combinations yield predictable cumulative lengths, reducing adjustment time for fixtures and gauges. This accuracy shortens setup intervals and supports reproducible measurements across repeated tasks. Practical set composition that reduces inventory complexity The composition of the kit covers standard step sizes and fine increments, enabling direct selection of the required length without resorting to excessive individual pieces. The set includes a graduated spread of small increments and standard lengths, offering both fine adjustment capability and full-range coverage for typical workshop applications. With a steel construction, the blocks provide thermal and mechanical robustness for daily handling, helping to maintain calibration stability and minimise frequent recalibration needs. The clear distribution of sizes simplifies stock management and lowers the need for multiple separate purchases. Designed for integration into workshop workflows Beyond dimensional accuracy, the set is tailored to support practical processes: quick identification of required values, easy stacking for compound lengths, and durable material choice for sustained service life. The matched set composition allows technicians and inspectors to assemble reference stacks swiftly, improving throughput in go/no-go inspections and setup checks. For teams aiming to harmonise measurement routines, this pack functions as a reliable core resource that complements existing calibration equipment and helps to professionalise traceable measurement routines in small and medium-sized workshops. Choose the TECWERK parallel gauge block set for robust, repeatable measurements and contact Metav Werkzeuge for tailored advice on integrating this kit into your workshop setup. Technical Data Article number: 2000851628NW Label: Parallelendmaßsatz Tol.-Kl.2 87tlg.STA TECWERK SKU: 2000851628NW Brand: TECWERK Product type: Parallel gauge block set Packaging unit: 1 Facts Set size: 87 pieces Tolerance class: 2 Set composition (pieces / mm ranges): 9 × 1.001–1.009 / 49 × 1.01–1.49 / 19 × 0.5–9.50 / 10 × 10–100 Special features Material: steel (STA) Metric length coverage across common increments Matched set for stacking and compound lengths FAQ What level of accuracy does the set provide? The TECWERK parallel gauge block set is supplied in tolerance class 2, offering defined maximum deviations suitable for many workshop and inspection tasks where class 2 precision meets process requirements. Which sizes are included in the kit? The set comprises a carefully graded selection: 9 pieces in the 1.001–1.009 mm range, 49 pieces in the 1.01–1.49 mm range, 19 pieces covering 0.5–9.50 mm and 10 pieces for 10–100 mm values, delivering wide metric coverage. Is the material suitable for regular shop use? Yes; the blocks are made of steel (STA), chosen for its mechanical stability and suitability for frequent handling in workshop environments. Can the set be used for calibration tasks? The matched configuration and tolerance class 2 make this kit appropriate as a reference for routine calibration and dimensional verification where class 2 accuracy is acceptable. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
87mm–100mm Carbide Parallel Gauge Set, 87 Pieces, DIN EN ISO 3650, Supplied in Case - Metav IndustryLine
Reliable dimensional reference thanks to carbide construction and compliance with DIN EN ISO 3650; the compact 87-piece range and organised protective case support consistent inspection routines and long service life. Secure the set directly via Metav Werkzeuge or consult our specialists for application advice. M322.870 — 87-piece Carbide Parallel Gauge Block Set (DIN EN ISO 3650) by Metav IndustryLine The M322.870 is a carbide 87-piece parallel gauge block set designed as a stable reference for calibration and inspection tasks in toolrooms, production measurement and quality control. 87-piece carbide set to DIN EN ISO 3650 Size coverage 1.001–100 mm in graduated steps Supplied in protective transport case Precise reference for calibration and inspection Durable reference for routine inspection and calibration Constructed from carbide, this gauge block set is built for wear resistance and dimensional stability. The material choice reduces surface wear during repeated wringing and contact use, which keeps the blocks within tolerance for longer and lowers the frequency of replacement. As a result, inspection intervals remain predictable and traceable, supporting efficient quality control processes and reducing measurement-related downtime. Wide coverage in compact organisation speeds up workflow The set covers sizes from 1.001–100 mm in finely graded steps across 87 pieces, offering a practical balance between reach and manageability. The graded configuration enables quick build-up of nominal lengths without unnecessary stacking, which simplifies set-up times for calibration tasks and in-process checks. This breadth of sizes makes the kit suitable for small components as well as larger assemblies, providing a single reference set that replaces multiple partial collections. Ready for the workshop: protected transport and easy handling Supplied in an organised protective case, the blocks remain secure and identifiable during storage and transport; the compact footprint supports bench-level use and orderly inventory. With a net weight of 4.2 kg, the set is robust yet portable, enabling shared use between inspection benches without undue handling effort. The case arrangement reduces the risk of accidental damage and keeps each gauge block immediately accessible for fast measurement cycles. Standardised accuracy for dependable metrology results Manufactured to DIN EN ISO 3650, the set provides a recognised standard for gauge blocks used in industrial calibration and verification. The compliance ensures compatibility with established calibration routines and integration into quality assurance documentation. For toolrooms and inspection labs seeking a reliable reference material, this set offers a pragmatic combination of precision, durability and comprehensive size selection supplied under the Metav IndustryLine quality umbrella. Contact Metav Werkzeuge today to obtain the M322.870 set from Metav IndustryLine and arrange delivery from Emmerich; specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M322.870 GTIN: 4054469132730 Category: Endmasse Manufacturer: Metav IndustryLine Facts Pieces per set: 87 Weight: 4.2 kg Customs tariff number: 90173000 Special features Material: Carbide Standard: DIN EN ISO 3650 Set composition: 9×1.001–1.009 mm / 49×1.01–1.49 mm / 19×0.5–9.5 mm / 10×10–100 mm Supplied in protective transport case FAQ What material are the gauge blocks made from? The gauge blocks in this set are made from carbide, which provides high wear resistance and long-term dimensional stability for reference measurements. Is the set suitable for calibration and traceable measurement routines? Yes, the set is manufactured to DIN EN ISO 3650 and serves as a standard reference for calibration and inspection tasks in production and toolroom environments. What size range does the set cover? The set covers sizes from 1.001 mm up to 100 mm across 87 pieces in a graduated composition for flexible build-up of nominal lengths. Is a protective case included for transport and storage? The blocks are supplied in a protective transport case to keep the set organised and to reduce the risk of damage during handling and storage. Can the set be used for both small precision parts and larger assemblies? Yes, the combination of fine small sizes and larger blocks allows the set to serve both fine mechanical measurements and checks on larger components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9 Calibration Gauge Blocks Set 5.1/10.3/15/20.2/25/50/75/100 mm, Grade 1, Wooden Case - Metav IndustryLine
The supplied product data contains contradictory information about the composition of the gauge block set and cannot be processed into a full product description in its current form. Specifically, the product label describes the set as eight gauge blocks plus a flat glass, while other supplied entries indicate nine gauge blocks and list the piece count as nine; these statements are inconsistent and make it unclear whether the set comprises eight or nine measuring blocks (and whether the flat glass is counted separately). Please correct the dataset so that the number of gauge blocks and the total contents of the set are consistent across all fields. Once the product contents are clarified, a complete, standards-compliant description and technical specification can be produced.
9 mm Gauge Block Grade 1 DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Take advantage of a compact length standard that combines traceable conformity, hardened special steel construction and a cross-section optimised for handling; the result is precise, repeatable measurements with a small footprint. Order directly via Metav Werkzeuge or contact our consultants for specification and supply details. Gauge block 9 mm — hardened length standard, DIN EN ISO 3650, Grade 1 The gauge block 9 mm is a hardened, high‑accuracy length standard intended for calibration tasks and dimensional checks in industrial metrology and laboratory environments. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Compact cross-section 30 x 9 mm for stable handling Traceable identification with GTIN and SKU Precision that supports reliable quality control This length standard is manufactured to DIN EN ISO 3650 and shipped as Grade 1, which communicates a predictable tolerance band suitable for routine and elevated inspection tasks. The compact nominal size of 9 mm stabilises thermal behaviour and reduces handling errors, while the hardened special steel substrate delivers surface integrity and wear resistance. As a consequence, this precision gauge provides a consistent reference for setting micrometres, calipers and optical comparators, supporting faster decisions on conformity and reducing downtime in measurement workflows. Robust form for repeatable measurements A cross-section of 30 x 9 mm (applies for nominal sizes up to 10 mm) gives the block a practical balance between mass and manoeuvrability: it is heavy enough to sit steadily during measurements yet small enough for rapid alignment in a set. The hardened finish minimises surface distortion and prolongs service life under regular use. At roughly 0.01 kg, handling is effortless and integration into existing gauge sets or storage systems is straightforward. Bold surface quality and consistent geometry together mean fewer rechecks and a dependable master for day‑to‑day inspection routines. Traceability and integration into calibration regimes The product is supplied with clear identification (SKU M319.090.1 and GTIN 4054469131535), which simplifies inventory and traceability within quality management systems. As a standardised length artefact, this block serves both as a direct calibration reference and as part of comparative checks that support internal audits and external conformity records. The hardened construction reduces the frequency of recalibration caused by wear, contributing to lower total cost of ownership over a measurement asset’s lifecycle. Where traceability chains and documented calibration history are required, this gauge block fits into established workflows and laboratory procedures. Practical benefits for workshop and laboratory use Because this block adheres to an international standard and is produced from hardened special steel, it is suitable for repeated contact with precision instruments without rapid degradation. The small form factor makes it an efficient choice for toolrooms, inspection benches and portable calibration kits, while the clear SKU and GTIN support procurement, stock control and digital asset tracking. Pairing standard conformity with a wear‑resistant material gives technicians a compact, reliable reference that keeps inspection throughput steady and predictable. Contact Metav Werkzeuge to confirm suitability for specific calibration chains and to arrange supply from Emmerich with full product documentation Technical Data Article number: M319.090.1 GTIN: 4054469131535 SKU: M319.090.1 Category: Endmasse Facts Nominal size: 9 mm Standard: DIN EN ISO 3650 Grade: 1 Weight: 0.01 kg Customs tariff number: 90173000 Special features Material: special steel, hardened Cross-section: 30 x 9 mm (for nominal sizes ≤ 10 mm) Intended use: length standard for calibration and dimensional checks Packaging: standard commercial packing for measurement tools FAQ What level of accuracy does this gauge block provide? This Grade 1 gauge block meets the tolerance band specified by DIN EN ISO 3650 and is intended for reliable workshop and inspection use where traceable conformity is required. Is the block suitable for inclusion in a master set for daily inspection work? Yes; the hardened special steel construction and compact cross-section make it a practical master reference within a gauge block set or portable calibration kit. How is the product identified for inventory and traceability? Identification is supported by SKU M319.090.1 and GTIN 4054469131535, enabling straightforward recording in quality management systems and procurement workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9 mm Gauge Block Single End, Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of DIN EN ISO 3650 Grade 0 accuracy combined with a hardened special steel construction in a compact 9 mm reference element; order directly via Metav Werkzeuge or consult our experts for procurement and application advice. Single gauge block 9 mm – DIN EN ISO 3650, Grade 0 (Metav IndustryLine) A single gauge block 9 mm designed as a precision reference for workshop and laboratory measurement tasks, suitable for use in inspection, calibration sets and reference stacks DIN EN ISO 3650 Grade 0 tolerance Hardened special steel construction Compact 30 x 9 mm cross-section Traceable reference for precision measuring Reliable reference accuracy for reproducible inspection results The product serves as a high-value reference element where repeatable dimensional control is essential. Manufactured to DIN EN ISO 3650 and specified as Grade 0, this gauge block provides tight manufacturing tolerance that reduces measurement uncertainty in routine inspection. The hardened special steel body limits wear and dimensional drift, making the block a stable standard for reference stacks or comparative checks in both workshop and metrology lab environments. Practical benefits include minimal thermal distortion during short handling and consistent contact behaviour on precision surfaces. Compact form factor that supports efficient workflows The compact cross-section and low mass make the block easy to handle and integrate into existing sets without adding bulk to a workstation. At a nominal size of 9 mm and a cross‑section of 30 x 9 mm, the device is optimised for stacking and for close‑tolerance assembly checks where space and manoeuvrability matter. This compact geometry shortens setup times for repeat measurements and simplifies the routine process of building reference stacks, which contributes directly to improved throughput in quality control tasks and a faster decision loop between measurement and production adjustments. Built for durability and consistent reference performance Constructed from hardened special steel, the block resists surface wear and preserves flatness under normal use, ensuring a long service life as a workshop reference. The combination of material selection and Grade 0 tolerance means fewer replacements and more dependable reference values over time, supporting cost‑efficient metrology practices. As part of Metav’s offering, this reference element benefits from the company’s quality filtering at its Emmerich location, a factor that underpins supply reliability and long‑term availability for procurement planning. Contact Metav Werkzeuge today to secure the Metav IndustryLine 9 mm gauge block (SKU M319.090.0) for your reference set and request further technical details Technical data SKU: M319.090.0 GTIN: 4054469131528 Standard: DIN EN ISO 3650 Nominal size: 9 mm Tolerance grade: Grade 0 Material: Hardened special steel Weight: 0.01 kg Facts Nominal size: 9 mm Cross-section: 30 x 9 mm (applies up to 10 mm) Weight: 0.01 kg Tariff number: 90173000 ECLASS: 21170108 Special features Single gauge block (individual end measure) Grade 0 accuracy per DIN EN ISO 3650 Hardened special steel construction Category: Endmasse (gauge blocks) FAQ What tolerance class does this gauge block meet? The single gauge block 9 mm meets Grade 0 tolerance according to DIN EN ISO 3650, providing a high level of dimensional accuracy suitable for reference use with Metav IndustryLine items such as SKU M319.090.0. Which material is used for the gauge block? This reference element is made from hardened special steel, chosen for wear resistance and stability under normal handling procedures, as specified for the Metav IndustryLine single gauge block 9 mm (M319.090.0). Can the block be used in a reference stack for calibration checks? Yes; the 9 mm individual block is suited for inclusion in reference stacks and comparative inspection sets where a Grade 0 element is required for precise length combinations. Is this gauge block intended for workshop use or lab use? The design supports both workshop and laboratory applications: its compact form and Grade 0 accuracy make the block appropriate for everyday inspection tasks as well as for controlled metrology procedures using Metav IndustryLine standards (SKU M319.090.0). How should the gauge block be handled and stored to maintain accuracy? Handle with clean, dry gloves if possible and store in a dry, dust‑free case to protect the finished faces; regular cleaning and correct stacking practice will help preserve the Grade 0 accuracy of the Metav IndustryLine 9 mm block (M319.090.0). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.5 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Benefit from the combination of ceramic construction and Grade 1 (DIN 861/1) accuracy for consistent, long-term reference performance; the compact 9.5 mm nominal length makes the block ideal for precision comparative checks. Order the part directly via Metav Werkzeuge or consult the team for specification guidance. Ceramic gauge block 9.5 mm, Grade 1 (DIN 861/1) — Metav IndustryLine The Ceramic gauge block 9.5 mm, Grade 1 DIN 861/1 is a compact, high-accuracy reference intended for inspection benches and laboratory comparative measurements. Ceramic construction for thermal stability Grade 1 accuracy according to DIN 861/1 Nominal length 9.5 mm for reference measurements Lightweight 0.016 kg for easy handling Accuracy that supports reliable inspection results The Grade 1 classification according to DIN 861/1 guarantees a clearly defined tolerance band, providing a dependable basis for comparative checks and routine inspection tasks. With a nominal length of 9.5 mm, this compact reference offers a precise baseline for short-range measurements where reproducibility is essential. The combination of standardised grading and a stable reference length reduces measurement uncertainty and simplifies quality-control documentation, making it a pragmatic choice for workshop metrology and incoming inspection. Material benefits for stable reference measurements Made from ceramic, the block offers low thermal expansion and high wear resistance, which helps preserve the reference length over repeated use. The thermal stability of the material reduces length variation with temperature changes, so reference readings remain more consistent in typical workshop environments than many metal alternatives. The light mass (0.016 kg) improves handling and reduces risk of surface damage during movement, while the hard, fine-grained surface minimises abrasion and prolongs service life. Practical handling and integration into measurement routines This compact reference block is designed for straightforward use as a comparative standard on inspection benches and for setting gauges or optical comparators. Its small footprint allows easy placement in gauge sets and fixtures, while the defined Grade 1 tolerance supports fast pass/fail assessments in production sampling. For traceable calibration chains, the block can be integrated into regular verification schedules as a stable short-length reference that streamlines daily checks without sacrificing precision. For calibration-grade reference standards from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M324.009.5 GTIN: 4054469143071 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Nominal size: 9.5 mm Weight: 0.016 kg Quality grade: 1 Special features Ceramic material Grade 1 tolerance according to DIN 861/1 Compact reference for calibration and comparative measurement FAQ What tolerance class does this reference block meet? The Ceramic gauge block 9.5 mm, Grade 1 DIN 861/1 meets Grade 1 tolerance requirements as specified in DIN 861/1, suitable for routine inspection and comparative measurements. Is the ceramic construction suitable for temperature-variable environments? Yes, the ceramic composition provides reduced thermal expansion compared with many metals, making the block better suited to maintain length stability across normal workshop temperature fluctuations. Can this block be used for setting measuring instruments? The compact 9.5 mm reference is well suited for setting and checking small instruments and gauges where a short, stable reference is required. How should the block be handled to preserve accuracy? Handle the reference block with clean hands or gloves and store it in a dry, dust-free environment; the hard ceramic surface resists wear but benefits from careful handling to avoid surface contamination. What is the article number for ordering or inventory? The product is listed under article number M324.009.5 and branded Metav IndustryLine for procurement and stock purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.5 mm End Gauge Gauge Block Grade 1 DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Reliable reference measurement from a proven standard: the Grade 1 end gauge conforms to DIN EN ISO 3650 and is made from hardened special steel, giving a stable nominal dimension of 9.5 mm and a compact cross-section for repeatable checks. For procurement and assured supply, order directly via Metav Werkzeuge or consult their specialists for professional guidance. End gauge 9.5 mm (DIN EN ISO 3650), Grade 1 – Metav IndustryLine The End gauge 9.5 mm is a hardened reference gauge suitable for dimensional verification in calibration laboratories and workshop quality control. DIN EN ISO 3650 compliant reference gauge Grade 1 accuracy for reliable checks Hardened special steel construction Compact 9.5 mm nominal size Stable reference for routine dimensional verification A certified reference in production monitoring and incoming inspection, this gauge delivers a consistent baseline for comparative measurement. The compliance with DIN EN ISO 3650 and the Grade 1 class emphasise its role as a high-quality checking standard rather than a wearable tool. This classification supports rational decision-making in quality management: traceable reference standards reduce uncertainty in pass/fail assessments and streamline acceptance criteria across batches and suppliers. Durable construction that reduces rework and uncertainty Constructed from hardened special steel, the gauge resists wear and maintains form stability during regular use. The compact 9.5 mm nominal dimension combined with a 30 x 9 mm cross-section offers a favourable stiffness-to-size ratio, which helps to preserve measurement integrity during handling. Such material selection and geometry translate into fewer replacements and predictable performance in the workshop or lab environment, supporting efficient maintenance schedules and lower total cost of ownership. Fits quality workflows and procurement processes Small form factor and standard conformity make the gauge easy to integrate into calibration sets and inspection benches. As a fixed-dimension reference, it supports quick comparative checks and can be incorporated into standard operating procedures for incoming goods control and in-process verification. The product is offered under the Metav IndustryLine range, reflecting the company's focus on accessible precision and reliable European supply, which contributes to predictable lead times and reduced administrative overhead for purchasing teams. Contact Metav Werkzeuge in Emmerich for procurement advice and reliable delivery of Metav IndustryLine reference gauges Technical data Article number: M319.095.1 GTIN: 4054469131559 Category: End gauges Standard: DIN EN ISO 3650 Accuracy grade: 1 Weight: 0.011 kg Tariff number: 90173000 ECLASS: 21170108 Facts Nominal size: 9.5 mm Cross-section: 30 x 9 mm (applies for nominal sizes ≤ 10 mm) Weight: 0.011 kg Special features Material: special steel, hardened Intended use: reference for dimensional checks and inspection Design: compact, stable cross-section for repeatable handling Range: single fixed nominal dimension for calibration sets FAQ What does Grade 1 signify for this end gauge? Grade 1 indicates a high-quality reference class under DIN EN ISO 3650; the End gauge 9.5 mm is manufactured and finished to provide reliable comparative measurement for quality control tasks. Which material is used and why is it important? The gauge is made of hardened special steel; this material is chosen to resist wear and maintain dimensional stability, ensuring longevity of the End gauge 9.5 mm during repeated use. In which environments is this reference gauge intended to be used? It is intended for calibration laboratories, inspection benches and workshop quality control where a stable, fixed-dimension reference is required for comparative checks and routine verification. Is the gauge delivered with identification for inventory and traceability? The Metav IndustryLine End gauge 9.5 mm is supplied with product identification (SKU M319.095.1 and GTIN 4054469131559) to support inventory control and traceability in quality systems. How should the gauge be stored to preserve accuracy? Store in a dry, temperature-stable environment, protected from impacts and contaminants; keeping the End gauge 9.5 mm in a designated protective case or drawer will help preserve its measuring surface. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9.5mm Gauge Block Single End, Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of the exact Grade 0 tolerance and hardened special-steel construction to secure a stable reference for precision checks; order the single gauge block directly via Metav Werkzeuge or consult the technical team for application advice. Single gauge block 9.5 mm, Grade 0 — Metav IndustryLine (DIN EN ISO 3650) The Single gauge block 9.5 mm, Grade 0 is a high-precision reference gauge designed for dimensional verification and calibration tasks in workshops and quality departments DIN EN ISO 3650 Grade 0 tolerance Hardened special-steel construction Compact 9.5 mm reference gauge Reliable reference for accurate calibration The Grade 0 tolerance specified by DIN EN ISO 3650 provides a reproducible baseline for comparative measurements and routine verification. As a standardised reference, the block enables consistent checks of micrometers, callipers and gauge sets, reducing measurement uncertainty in production and inspection workflows. The nominal size 9.5 mm is particularly useful for establishing intermediate references within block sets or for direct comparison in dimensional control processes. Durable material for long-term dimensional stability Manufactured from hardened special steel, the gauge block resists wear and maintains form stability during repeated use. Thermal expansion is minimised by the material choice and machining quality, so dimensional drift over typical workshop temperature ranges is low. The compact mass (approximately 11 g) simplifies handling and lowers the risk of deformation during routine manipulation, while the robust finish supports longevity in demanding inspection environments. Space-saving design that fits precision workflows The compact geometry of the 9.5 mm reference block makes it suitable for inclusion in existing gauge block sets or for reserved use as a stand-alone reference in tight inspection benches. Its cross-section and length balance stiffness and accessibility, allowing secure placement in fixtures or between measuring faces. This practical format supports efficient measurement cycles and helps maintain throughput without compromising on measurement reliability. Consistent implementation in quality systems Integration into calibration routines is straightforward thanks to the standard-compliant specification. The reference block serves as a repeatable artefact for everyday accuracy checks and routine instrument verification. For laboratories and workshops seeking to uphold consistent quality, the combination of DIN EN ISO 3650 compliance and hardened material provides a trustworthy basis for traceable, repeatable inspections and process control. Contact Metav Werkzeuge to confirm suitability for the intended inspection task and to arrange supply directly from Emmerich for fast, reliable delivery Technical data SKU: M319.095.0 GTIN: 4054469131542 Label: Single gauge block 9.5 mm, DIN EN ISO 3650, Grade 0 Facts Nominal size: 9.5 mm Weight: 0.011 kg Cross-section: 30 x 9 mm (for sizes up to 10 mm) Tariff number: 90173000 Special features Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 0 Category: Gauge blocks (Endmasse) FAQ What tolerance class does this gauge block belong to? The block is manufactured to Grade 0 according to DIN EN ISO 3650, providing a high-precision reference suitable for workshop and inspection use. What material is the gauge block made from? This single gauge block is produced from hardened special steel, chosen for wear resistance and dimensional stability. Can the block be used as a stand-alone reference in a gauge set? Yes, the 9.5 mm reference gauge is intended for integration into measurement routines and can be used independently or alongside other blocks for comparative checks. Is the block suitable for everyday workshop verification? The combination of standard compliance and robust material makes the block appropriate for routine verification tasks within quality-control workflows. How should the gauge block be handled to preserve accuracy? Handle with clean gloves or tweezers, store in a dry, temperature-stable environment and avoid direct contact with abrasive surfaces to maintain the block's dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90 mm Gauge Block End Measure Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of a Grade 1 reference gauge manufactured from hardened special steel and certified to DIN EN ISO 3650 for reliable length verification; the compact 90 mm nominal size combines repeatable accuracy with easy handling. Order directly via Metav Werkzeuge or consult the sales team for inspection-grade tooling. End gauge 90 mm (DIN EN ISO 3650, Grade 1) — Metav IndustryLine hardened special steel The End gauge 90 mm is a Grade 1 length standard designed as a reference for dimensional inspection and verification in workshops and quality laboratories. DIN EN ISO 3650 Grade 1 tolerance Hardened special steel for wear resistance Nominal length 90 mm for standard references Compact weight 0.21 kg for convenient handling Deliver consistent, traceable inspection results As a precision reference gauge, this 90 mm standard provides a stable length for routine checks and comparative measurements. Its compliance with DIN EN ISO 3650 and classification as Grade 1 ensure that the gauge meets internationally recognised tolerances, which reduces measurement uncertainty during acceptance checks and in-process inspections. By using a standardised reference piece made from hardened special steel, workshops and inspection rooms obtain repeatable contact conditions and long-term dimensional stability, which supports consistent quality decisions. Built to withstand repetitive use while keeping form The hardened alloy construction offers high wear resistance and dimensional stability under repeated contact, extending service life and lowering the need for frequent replacement. The defined cross-section—specified as 30 x 9 mm up to 10 mm and 35 x 9 mm from 10.1 mm—gives sufficient stiffness for short reference lengths while remaining compact. A weight of 0.21 kg makes the standard easy to position without sacrificing the mass that helps stabilise the gauge during contact measurement, combining practical handling with robust mechanical behaviour. Simple integration into inspection routines Designed as a reference length rather than a measuring instrument, this end gauge functions as a physical standard for tool setting, comparator checks and go/no-go measurements. The compact format suits bench-top inspection and portable comparator stations alike. Marked and catalogued under the SKU M319.900.1, it fits into established calibration and verification workflows where adherence to DIN EN ISO 3650 Grade 1 is required, helping to streamline conformity checks and documentable quality assurance procedures. Choose Metav IndustryLine Grade 1 end gauges from Metav Werkzeuge for reliable reference standards and straightforward integration into calibration and inspection routines — our Emmerich-based team can advise on specifications and supply options Technical Data Article number: M319.900.1 GTIN: 4054469132334 Norm: DIN EN ISO 3650 Material: Special steel, hardened Nominal length: 90 mm Weight: 0.21 kg Facts Nominal length: 90 mm Weight: 0.21 kg Cross-section: up to 10 mm – 30 x 9 mm; from 10.1 mm – 35 x 9 mm Tolerance class: Grade 1 Special features Standard: DIN EN ISO 3650 Category: End gauges Material: Special steel, hardened SKU: M319.900.1 FAQ What standard does the gauge comply with? The End gauge 90 mm is specified to DIN EN ISO 3650 and offered in Grade 1 tolerance for recognised length-reference applications. What material is used for the gauge? This reference is made from special steel, hardened, chosen to provide wear resistance and dimensional stability under repeated contact. What are the nominal dimensions and handling characteristics? Nominal length is 90 mm; cross-section dimensions are 30 x 9 mm (up to 10 mm) and 35 x 9 mm (from 10.1 mm); weight is 0.21 kg, which supports easy handling and stable placement. For which inspection tasks is this reference intended? The item serves as a compact length reference for comparator checks, tool setting and routine dimensional verification where a Grade 1 end standard is appropriate. Which catalogue identifier should be used when ordering or referencing the gauge? Reference the SKU M319.900.1 when specifying the Metav IndustryLine end gauge in documentation or procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90 mm Gauge Block Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of DIN EN ISO 3650 grade‑0 accuracy, a hardened special‑steel construction and a compact 90 mm nominal length for reliable reference measurements; order directly via Metav Werkzeuge or contact our consultants for further technical advice. Einzel-Endmaß 90 mm, DIN EN ISO 3650 — Grade 0 (Metav IndustryLine) A Single gauge block 90 mm designed for high‑precision reference and inspection tasks in calibration laboratories and precision workshops DIN EN ISO 3650, Grade 0 accuracy Hardened special‑steel construction Compact 90 mm nominal length Certified standard compliance for dependable reference measurements The block conforms to DIN EN ISO 3650, making it suitable as a traceable reference in quality control and inspection contexts. As a Grade 0 element, the block offers the precision required for many workshop and metrology‑room applications while keeping handling straightforward. The standardised nominal length of 90 mm facilitates direct substitution into gauges and fixtures calibrated to metric baselines and supports consistent measurement chains across production and testing stages. Robust material and geometry for repeatable results Manufactured from hardened special steel, the gauge block provides high surface stability and wear resistance under routine use. The cross‑section for this size is 35 x 9 mm, giving a balanced profile that resists bending during handling and placement. With a net weight of 0.21 kg, the component is easy to manoeuvre yet solid enough to remain stable on inspection tables. These design choices reduce handling variability and contribute to repeatable measurement outcomes in everyday metrology tasks. Integrates into workshop workflows and quality systems As a single block in a precision set or as an individual reference, this element supports tasks such as tool setting, dimensional verification and calibration spot checks. The compact format minimises storage space while retaining the metrological properties expected from workshop standards. Backed by Metav’s focus on democratised precision, the product aligns with the logistical reliability and product range needed to equip production floors and service labs with dependable measuring artefacts. For precise, standard‑compliant reference measurement from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for availability and technical documentation: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M319.900.0 GTIN: 4054469132327 Material: Spezialstahl, gehärtet Nominal length: 90 mm Standard: DIN EN ISO 3650 Grade: 0 Cross-section: 35 x 9 mm Net weight: 0.21 kg Tariff number: 90173000 Facts Length: 90 mm Weight: 0.21 kg Cross-section dimensions: 35 x 9 mm GTIN: 4054469132327 Tariff number: 90173000 Special features Single gauge block design Hardened special‑steel for wear resistance Conforms to DIN EN ISO 3650, Grade 0 Category: Endmasse FAQ What accuracy level is offered by this gauge block? The gauge block meets DIN EN ISO 3650 Grade 0 requirements, providing the level of accuracy appropriate for many workshop and inspection tasks; the Metav IndustryLine single gauge block M319.900.0 serves as a reliable reference element. Which material is used for the block and what benefit does it bring? Made from hardened special steel, the block delivers improved surface stability and wear resistance, enhancing the longevity of the Metav IndustryLine gauge block during regular use. Is the 90 mm block suitable for tool setting and calibration checks? Yes, the compact 90 mm nominal length makes this block well suited for tool presetting, dimensional verification and integration into calibration routines within production or service environments. Can this block be combined with other gauge elements? The single Endmaß is designed to be used alongside other gauge blocks and reference elements to build measurement stacks or to provide discrete reference lengths in inspection setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90.62/90.75/90.87/91.00 mm Flat Glass Set For Micrometer Calibration 0.1 µm Accuracy - Metav IndustryLine
Take advantage of the combination of 0.1 µm accuracy, precise parallelism ≤ 0.006 mm and a set of four stepped reference plates to verify micrometers across the mid‑range reliably; order the plane glass set directly via Metav Werkzeuge or consult our specialists if further guidance is needed. Plane Glass Set for Micrometer Inspection M318.228 — 0.1 µm accuracy, four plates Plane Glass Set for Micrometer Inspection M318.228 is a compact verification kit designed for checking and adjusting micrometers in the 75–100 mm range, suitable for both workshop and laboratory environments. 0.1 µm certified accuracy Four precision plates included For micrometers 75–100 mm Parallelism ≤ 0.006 mm Reliable reference for mid‑range micrometer checks The set provides high‑stability reference surfaces for systematic verification of measuring instruments in the micro range. With an inherent accuracy of 0.1 µm, the plates serve as a repeatable baseline to detect wear, setting errors or mechanical drift in micrometers and screw gauges. The stepped lengths (90.62, 90.75, 90.87 and 91.00 mm) enable incremental checks across the working span, so linearity and zero‑point behaviour can be assessed without extrapolation. Practical benefits during daily calibration routines Supplied as a four‑piece set, the plates simplify routine inspection sequences: they allow quick stack checks and direct comparison measurements at several points within the 75–100 mm band. The stated parallelism ≤ 0.006 mm reduces uncertainty when used as an anvil reference, lowering the need for complex fixturing. For workshops seeking consistent throughput, the kit supports fast corrective actions and minimises instrument downtime by making deviations immediately visible and quantifiable. Simple method, clear results Use these plane glass standards to check an instrument by placing a reference plate between the micrometer anvils and recording deviations from the nominal value for each step. The set is designed for straightforward handling: its compact format and defined plate sizes reduce manipulation errors and support reproducible procedures in calibration logs. Where traceability and documented checks are required, the plates provide a robust basis for quality records and maintenance schedules. For assured, traceable micrometer verification with Metav IndustryLine’s plane glass set, contact Metav Werkzeuge in Emmerich for tailored technical advice and prompt supply. Technical data Article number: M318.228 GTIN: 4054469184296 SKU: M318.228 Category: Parallel plates Facts Accuracy: 0.1 µm Flatness: 0.1 µm Parallelism: 0.006 mm Plate lengths: 90.62 mm, 90.75 mm, 90.87 mm, 91.00 mm Pieces per set: 4 Weight: 0.5 kg Special features Set for micrometer inspection (75–100 mm) Micro range classification (max 10–100 mm) Stepped sizes for linearity and zero checks Compact, workshop‑friendly format FAQ What accuracy can be expected from this plane glass set? The plane glass set offers an accuracy of 0.1 µm, which allows fine detection of deviations when verifying micrometers in the 75–100 mm range. How many plates are included and what are their sizes? The set includes four plates with lengths of 90.62 mm, 90.75 mm, 90.87 mm and 91.00 mm, supplied together to perform stepped checks across the target range. Can the set be used to check micrometer linearity? Yes. By measuring across the provided plate sizes, the plane glass set enables assessment of linearity and point‑to‑point consistency for a micrometer. Is the parallelism specification sufficient for workshop calibration? The declared parallelism of 0.006 mm is intended to give consistent reference behaviour for routine verification and short‑term adjustments in workshop and lab settings. Which micrometers are suitable for verification with this kit? The plane glass set is designed specifically for micrometers with an intended measurement span of 75–100 mm and is ideal for mid‑range verification tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
900mm Gauge Block Set Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 Grade 0 accuracy, a hardened special steel body and a stable 35 x 9 mm cross-section for reliable master-length references; order the end gauge directly via Metav Werkzeuge or ask the consultants for application advice. End gauge 900 mm (Grade 0) – DIN EN ISO 3650 by Metav IndustryLine The End gauge 900 mm (Grade 0) is a precision reference for calibration and verification of large-format measuring setups, designed for workshops and metrology labs that require a stable, standard-compliant master length. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Cross-section 35 x 9 mm for stability 900 mm nominal length, robust 3.3 kg mass Consistent calibration performance for lab and workshop The 900 mm master is manufactured to DIN EN ISO 3650 and delivered as a Grade 0 end gauge, providing a consistent reference length for calibration tasks and instrument verification. As a hardened, precision-ground standard, it reduces uncertainty during comparative measurements and supports quality assurance routines. This design is intended to stabilise dimensional checks across long spans, offering improved repeatability when used as a workshop master or transfer standard. Robust construction that keeps measurements repeatable Built from hardened special steel and featuring a 35 x 9 mm cross-section, the gauge combines wear resistance with a profile designed to minimise bending and torsion over its length. The substantial mass of 3.3 kg contributes to steady contact during set-up and reduces the likelihood of movement during handling. These design choices deliver a practical balance between rigidity and manageability, making the gauge suitable for daily use in production control as well as in inspection benches. Suited to large-range reference and practical integration Classified for the Large-range (500–1,000 mm) segment, this end gauge addresses needs where sufficient profile stiffness is essential for reproducible results across an extended measuring length. The item integrates readily into calibration routines and serves as a master for verifying comparators, length-measuring devices and gauge sets. The straightforward geometry and standard conformity simplify documentation and traceability when recording routine verifications. Select the 900 mm Grade 0 end gauge from Metav IndustryLine for dependable large-range master measurements—contact Metav Werkzeuge in Emmerich on +49 2822 7131930 or info@metav-werkzeuge.com for supply and technical advice Technical data SKU: M320.900.0 GTIN: 4054469132587 Customs tariff: 90173000 Facts Nominal length: 900 mm Cross-section: 35 x 9 mm Weight: 3.3 kg Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 0 Category: End gauges FAQ What level of accuracy does this end gauge provide? The end gauge is manufactured to DIN EN ISO 3650 and supplied as a Grade 0 reference, which designates a high-precision master suitable for calibration and verification tasks. Is the 900 mm end gauge suitable for workshop use or only for laboratories? The gauge is suitable for both workshop and laboratory environments; its robust design and hardened special steel construction make it appropriate as a daily-use master for production control and inspection benches. How does the cross-section affect measurement stability? The 35 x 9 mm profile increases stiffness along the length, reducing deformation and helping to maintain repeatable contact during comparative measurements. Can the gauge be used as a master for other measuring instruments? Yes, the 900 mm Grade 0 end gauge is intended as a master reference for verifying length-measuring devices, comparators and gauge sets within its large-range class. Are there handling considerations due to weight? At 3.3 kg, the gauge offers stability during set-up; safe handling practices and two-person assistance may be advisable for frequent repositioning to avoid impact or accidental drops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
900mm Gauge Block Set Grade 1 DIN EN ISO 3650, Hardened Special Steel, 35x9mm - Metav IndustryLine
Take advantage of Grade 1 accuracy, hardened special steel construction and a compact 35 x 9 mm cross section for a stable, repeatable reference standard; order the end gauge directly via Metav Werkzeuge or contact our consultants for specification advice. End gauge 900 mm – Grade 1 reference gauge, hardened special steel (Metav IndustryLine) The End gauge 900 mm is a long reference standard designed for high-stability length checks and shop-floor calibration tasks in industrial metrology. DIN EN ISO 3650 Grade 1 reference standard Hardened special steel construction for stability Nominal length 900 mm with compact cross section Robust for workshop and laboratory use Reliable reference accuracy that supports process control The gauge is manufactured to DIN EN ISO 3650 in Grade 1, providing a dependable limit reference for length verification and setting operations. Its 900 mm nominal length and slim 35 x 9 mm cross section reduce thermal mass while preserving sufficient stiffness for routine comparative checks. As a result, the instrument serves well as a workshop reference for setting calipers, gauges and inspection fixtures, ensuring repeatable results across production batches and reducing uncertainty in downstream processes. Durable construction that reduces handling uncertainty Made from hardened special steel, this long end gauge resists wear and distortion during regular use. The material choice and heat treatment produce a dimensionally stable component that withstands typical workshop conditions; this translates into lower maintenance and fewer replacements over the tool life. The slim profile keeps handling manageable while the overall mass of 3.3 kg contributes to a steady reference during contact measurements, helping to avoid measurement scatter caused by flexing or thermal drift. Practical features for integration into inspection routines With an industrially oriented design the gauge is straightforward to include in routine checks and fixture set-ups. The simple geometry aids rapid positioning, and the Grade 1 classification provides clear expectations for permissible deviations under the standard. The robust construction makes the part suitable for repeated comparative measurements and occasional transport between bench and inspection area, which supports efficient quality-control cycles and faster decision-making on the shop floor. Confidence and continuity from a proven metrology partner Sourcing this reference from a focused metrology line ensures supply-chain consistency and a manufacturer-aware quality level. The clear compliance with DIN EN ISO 3650 and the solid material choice promote confidence in measurement results and audit trails. For operations that rely on stable benchmarks to keep machining and assembly tolerances within specification, this gauge offers an uncomplicated route to improved traceability and fewer process interruptions. For ordering information, application advice or to request a detailed specification sheet for this Metav IndustryLine reference gauge, contact Metav Werkzeuge in Emmerich for personalised support and delivery guidance. Technical data Article number: M320.900.1 GTIN: 4054469132594 Tariff number: 90173000 Net weight: 3.3 kg Numbers / core technical data Nominal length: 900 mm Cross section: 35 x 9 mm Grade: 1 (DIN EN ISO 3650) Material: special steel, hardened Special features / versions Designed as a long end reference gauge Conforms to DIN EN ISO 3650 Grade 1 Compact cross section for reduced thermal mass Suitable for workshop and laboratory comparative checks Manufacturer: Metav IndustryLine FAQ What tolerance class does this gauge comply with? This end gauge complies with DIN EN ISO 3650 and is specified as Grade 1, making it suitable for many industrial reference and setting tasks. Is the material specified for robust workshop use? Yes. The gauge is manufactured from hardened special steel, offering wear resistance and dimensional stability for regular workshop handling. Can this gauge be used to set calipers and limit gauges? The 900 mm reference is intended for comparative setting and verification of length-measuring tools and fixtures; the M320.900.1 is well suited to such applications. What are the physical dimensions that affect handling? Key dimensions are the nominal length of 900 mm and the 35 x 9 mm cross section; these balance reach with manageable handling and reduced thermal mass. Is this product part of a recognised metrology line? Yes. The item is offered under Metav IndustryLine and is presented as a Grade 1 reference gauge for industrial measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the ceramic construction, Grade 1 accuracy (DIN 861/1) and the compact 90 mm nominal length for a stable, reproducible reference in routine inspections and small-batch production. Order the part directly via Metav Werkzeuge or consult the Metav team for application advice and supply options. Ceramic gauge block 90 mm (Grade 1 DIN 861/1) — Metav IndustryLine reference standard with high dimensional stability The ceramic gauge block 90 mm (Grade 1 DIN 861/1) serves as a compact, durable reference for precision measurement and calibration tasks in workshops and quality laboratories. Ceramic material for thermal stability Grade 1 accuracy to DIN 861/1 Nominal length 90 mm for reference setups Lightweight 0.172 kg for easy handling Stable reference for repeatable dimensional checks A ceramic reference block provides a stable, low‑expansion baseline for comparison measurements. As a Grade 1 item to DIN 861/1, this block offers a reliable tolerance class appropriate for routine inspection and calibration tasks where reproducibility matters. The hard, inert surface reduces wear and contact deformation during frequent gauge-to-gauge comparisons, ensuring readings remain consistent over time. For workshops seeking fewer remeasurements and predictable inspection results, the material choices and grade classification translate directly into time saved and reduced scrap rates. Thermal resistance and long-term durability that supports process control Ceramic is chosen for its low thermal expansion and wear resistance, so dimensional drift from ambient temperature fluctuations is minimised compared with many metallic standards. That stability benefits small parts inspection, setting up comparators and verifying gauges where close thermal control is not always possible. The material also resists surface contamination and corrosion, which preserves measurement fidelity and extends service intervals. In practice this means the reference retains its geometry during regular handling and can be relied upon as a stable benchmark within an established quality workflow. Practical handling, traceability and workshop integration With a nominal length of 90 mm and a mass of approximately 0.172 kg, the block is easy to manoeuvre and incorporate into bench setups or fixture-based comparisons. The compact format suits calibration racks, comparator stands and hand-held checks where a full set of blocks might be impractical. Identifiable markings and the Metav IndustryLine supply chain support straightforward traceability and stock management in the toolroom. Where certified traceability is required for audits or supplier validation, Metav’s documentation and delivery processes facilitate integration into existing quality systems. Contact Metav Werkzeuge to discuss the Metav IndustryLine ceramic gauge block for your inspection routine and to arrange supply or tailored delivery options Technical Data Article number: M324.090 GTIN: 4054469143460 ECLASS: 21170108 Customs tariff number: 90173000 Facts Nominal length: 90 mm Weight: 0.172 kg Accuracy grade: 1 (DIN 861/1) Special features Material: Ceramic Category: Gauge block (Endmasse) Manufacturer brand: Metav IndustryLine FAQ What accuracy class does this gauge block meet? This ceramic gauge block meets Grade 1 accuracy according to DIN 861/1, offering the tolerance level suitable for routine inspection and calibration tasks. Why choose a ceramic block over a steel alternative? Ceramic offers lower thermal expansion and higher wear resistance, so the gauge block maintains dimensional stability and resists corrosion better than many steel equivalents. Is the 90 mm length suitable for workshop reference use? Yes; the 90 mm nominal length is compact yet sufficiently long for comparator setups and transfer measurements commonly required in metalworking and inspection benches. Can this block be used in a calibration laboratory? The block is designed as a stable reference for quality control and calibration workflows; for laboratory accreditation requirements, confirm required traceability and documentation with Metav Werkzeuge. How should the block be stored to preserve accuracy? Store the block in a clean, dry environment away from rapid temperature swings; use protective packaging when not in use to prevent surface contamination and mechanical damage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a ceramic reference standard that combines dimensional stability and wear resistance with a compact 9 mm nominal length for fast, reproducible checks; order via Metav Werkzeuge or consult the team in Emmerich for advice and availability. Ceramic Gauge Block 9 mm – Grade 1 (DIN 861/1) by Metav IndustryLine The Ceramic gauge block 9 mm, Grade 1 (DIN 861/1) is a compact, high-stability reference standard intended for precision length checks and calibration tasks in metrology workshops and calibration laboratories. Grade 1 accuracy (DIN 861/1) Ceramic construction for thermal stability Compact 9 mm nominal length Lightweight: optimised for repeatable positioning Stability and accuracy for everyday calibration routines The combination of ceramic material and Grade 1 classification per DIN 861/1 yields a reference piece that is particularly suited to routine calibration and verification tasks. Ceramic's low thermal expansion contributes to consistent dimensional behaviour across typical workshop temperature variations, so the block acts as a reliable reference standard for comparative measurements. The compact 9 mm nominal length supports quick calibration sequences and makes the component ideal for spot checks where larger gauge blocks would be impractical. Practical handling that speeds up inspection workflows With a nominal length of 9 mm and a mass of 0.015 kg, this reference block is easy to manipulate and position during inspection. The small footprint reduces fixturing time and helps maintain a steady measuring technique, which in turn enhances reproducibility. The robust ceramic surface resists routine wear and simplifies cleaning between uses, so maintenance is straightforward and downtime is minimised. These factors support a lean metrology process with fewer interruptions and predictable throughput. Traceability, standards conformity and supply reliability Marked as a Grade 1 item under DIN 861/1, this gauge block meets recognised industry expectations for workshop and calibration use. The product is supplied under the Metav IndustryLine range, backed by Metav's quality-filtered supply chain in Emmerich. That combination of standard conformity and dependable distribution provides buyers with both technical assurance and logistical confidence when specifying reference standards for inspection equipment and quality-control stations. For precision reference standards with consistent thermal and wear behaviour, contact Metav Werkzeuge in Emmerich for technical advice and to arrange procurement of the Metav IndustryLine ceramic gauge block 9 mm Technical data Article number: M324.009 GTIN: 4054469143064 Tariff number: 90173000 Weight: 0.015 kg Facts Material: Ceramic Nominal length: 9 mm Accuracy grade: Grade 1 (DIN 861/1) Category: End gauges (gauge block) Special features Compact, stable reference standard Suitable for routine calibration and spot checks Metav IndustryLine product FAQ What level of accuracy does this gauge block provide? The ceramic gauge block 9 mm is classified as Grade 1 according to DIN 861/1, which designates it as suitable for precise workshop and calibration use. Is the material suitable for regular handling and cleaning? Yes, the ceramic construction of this gauge block offers good wear resistance and straightforward cleaning for repeated inspection cycles. Can this reference block be used for temperature-sensitive measurements? The low thermal expansion behaviour of ceramic helps reduce dimensional drift during typical workshop temperature changes, making it suitable as a stable reference standard. Which applications suit a 9 mm nominal length gauge block? The compact 9 mm size is ideal for spot checks, comparative measurements and calibration tasks where small reference lengths are required. Who supplies this product and what is the article number? This item is supplied under Metav IndustryLine; article number M324.009 and GTIN 4054469143064 identify the specific product. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9x1.001–1.009/49x1.01–1.49/19x0.5–9.5/10x10–100 Carbide Gauge Set, DIN EN ISO 3650 Case - Metav IndustryLine
The hard-wearing combination of carbide construction, DIN EN ISO 3650 compliance and a protective transport case ensures consistent, repeatable measurement across the workshop; use the set to simplify calibration checks and fixture setup. Order the set directly via Metav Werkzeuge or contact our consultants for tailored advice. Carbide parallel end gauge set — workshop-grade precision, DIN-compliant flatness (Metav IndustryLine) The Carbide parallel end gauge set provides a compact system of hardened, ground end measures designed for alignment, go/no-go checks and stackable setting tasks across mechanical workshops and tool rooms. 87-piece carbide gauge set DIN EN ISO 3650 compliance Precision-ground measuring faces Supplied in protective case Repeatable accuracy for everyday quality control The set is built to deliver consistent flatness and parallelism for alignment and inspection tasks. Manufactured from carbide, each gauge face is ground to meet the demands of repetitive use, reducing wear and preserving measurement integrity. Conformity with DIN EN ISO 3650 gives a clear reference for tolerance and interchangeability; the standardised geometry simplifies comparison with calibrated references and supports reliable setup of fixtures and jigs. This results in fewer adjustment cycles and steadier production output. Durable materials that lower lifetime costs Using hard-wearing carbide for the measuring faces reduces deformation and the need for frequent replacement, which is especially relevant when end measures are used as setting masters or in abrasive shop environments. The robust construction and ground surfaces maintain contact accuracy even under regular handling. As a practical benefit, the set’s total mass of 4.2 kg and compact organisation in a protective case make transport between workstations straightforward while protecting components from accidental damage. Practical assortment and workshop benefits The set comprises a comprehensive range of thicknesses, covering fine increments from around 0.5 mm up to larger stackable measures approaching 100 mm, enabling quick stacking for bespoke lengths without machining new reference blocks. Supplied as a complete set with 87 pieces, the assortment reduces downtime: a single kit covers most routine alignment and setup tasks. Organisational efficiency is increased as reference stacks can be prepared and stored in the case, ready for repeatable use at the machine or inspection bench. Opt for the Metav IndustryLine carbide parallel end gauge set (M322.871) for durable, DIN-compliant references — contact Metav Werkzeuge for availability and advice tailored to specific workshop needs. Technical Data Article number: M322.871 Manufacturer: Metav IndustryLine GTIN: 4054469132747 Standard: DIN EN ISO 3650 Facts Pieces per set: 87 Weight: 4.2 kg Tariff number: 90173000 Size coverage: pieces from approx. 0.5 mm to 100 mm Special features Material: carbide Delivery: protective transport case Application: alignment, setting, inspection FAQ What sizes are included in the set? The set contains 87 pieces in a graded assortment, covering fine increments from approximately 0.5 mm up to around 100 mm for flexible stacking and bespoke reference lengths. What material are the measuring faces made from? Measuring faces are manufactured from carbide, offering high wear resistance and stability for repeated workshop use with the Carbide parallel end gauge set (M322.871). Does the set meet any standards for flatness and geometry? Yes — the components are produced to DIN EN ISO 3650, providing a recognised benchmark for parallelism and dimensional consistency. How is the set supplied and stored? The complete 87-piece set is supplied in a protective transport case that organises each gauge and shields surfaces from damage during handling. What workshop tasks is the set suitable for? The set is suitable for alignment, go/no-go checks, fixture setting and as a reference stack for machine setup and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Endmaß-Verlängerung und-Verbinder
Detailinformationen und Technische Daten zu Endmaß-Verlängerung und-Verbinder : Hersteller: Metav IndustryLine Bezeichnung: Endmaß-Verlängerung und-Verbinder zur Verbindung von Endmaßen mit oder ohne Verbindungsbohrungen Beschreibung: Austausch-Endmaß 20mm oder Verlängerungsatz 4x100mm je nach Ausführung Besonderheit: Passstück aus 10mm Endmaß mit Verlängerungen 10/15/20/25/30mm Gewicht: 0,05 kg Güte: 1 Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Ø100x30 Base for End Gauge Holder Very Robust Design 1.7 kg - Metav IndustryLine
Take advantage of the heavy, stable construction and the Ø100 x 30 mm footprint to secure repeatable results during gauge block set-up and calibration; order the part directly via Metav Werkzeuge or consult our specialists if further clarification is required. M317.212 Foot for End-measure Holder (Ø100 x 30 mm) — heavy-duty 1.7 kg by Metav IndustryLine M317.212 is a compact, heavy-duty base for end-measure holders, designed for secure horizontal or vertical mounting in calibration and workshop environments Heavy 1.7 kg stable construction Horizontal and vertical mounting possible Ø100 x 30 mm footprint for secure support Engineered for stable calibration and repeatable measurement The base is manufactured for stability: its robust construction and 1.7 kg mass reduce movement and minimise the influence of ambient vibration during delicate set-ups. This results in faster achievement of measurement equilibrium and improved repeatability when aligning end measures or gauge blocks. The increased mass acts as a passive damper, which is particularly beneficial in busy workshop areas where floor or bench vibrations can otherwise degrade accuracy. Such design choices translate directly into fewer re-measurements and more reliable calibration outcomes. Flexible mounting and clear compatibility for holders Designed to accept the common holder formats, the foot features a Ø100 x 30 mm interface and supports cross-sections of 30 x 5 mm for holders up to 300 mm and 30 x 6.7 mm for larger sizes. The possibility of secure horizontal and vertical arrangement gives practical flexibility when working with different gauge stacks or when space is limited on the bench. Clear, standardised geometry simplifies integration with existing end-measure systems and helps ensure the holder sits free of play, enabling precise seating of gauge elements and consistent contact orientation during calibration. Practical benefits for the workshop and calibration bench Beyond dimensional compatibility, the design focuses on day-to-day usability: stable positioning speeds up set-up, while the compact footprint keeps the bench uncluttered. The construction is described as very stable, meaning less handling-induced error during repeated use and a robust platform for transferring reference lengths. For technicians performing routine checks or formal calibrations, this translates into more efficient workflows and reduced uncertainty in comparative measurements. The base is therefore a pragmatic choice wherever reliable support for end-measure holders is required. For traceable and robust end-measure set-ups, choose the Metav IndustryLine M317.212 foot and arrange supply or technical advice through Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M317.212 GTIN: 4054469127569 eCl@ss: 21170108 Facts Weight: 1.7 kg Foot dimensions: Ø100 x 30 mm Tariff number: 90173000 Special features Very stable execution Horizontal and vertical mounting possible Cross-section compatibility: up to 300 mm → 30 x 5 mm; from 300 mm → 30 x 6.7 mm FAQ How does the weight of the foot affect measurement stability? The 1.7 kg mass of the M317.212 base increases inertia and dampens small vibrations, improving stability for end-measure holder set-ups and supporting repeatable comparative measurements. Can the foot be used both horizontally and vertically? Yes, the design of this Metav IndustryLine foot allows secure horizontal and vertical mounting to suit different gauge block arrangements and bench layouts. Which cross-section holders are compatible with this base? The base accepts holders with a cross-section of 30 x 5 mm for lengths up to 300 mm and 30 x 6.7 mm for larger holders, matching common end-measure holder standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com