End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
250mm End Gauge Grade 1, DIN EN ISO 3650, Hardened Special Steel, 35x9mm - Metav IndustryLine
Take advantage of Grade 1 accuracy and a rigid 35 x 9 mm profile for dependable reference measurements; the hardened special-steel construction ensures long-term stability while the compact 250 mm size simplifies handling in both workshop and inspection environments. Order the gauge directly via Metav Werkzeuge or ask our consultants for application advice. End measure 250 mm — Grade 1 precision, hardened special steel The End measure 250 mm is a hardened precision end measure for calibration and reference work in workshop and laboratory settings, compliant with DIN EN ISO 3650. Hardened special steel construction Grade 1 accuracy to DIN EN ISO 3650 Nominal length 250 mm Rigid 35 x 9 mm cross-section A reference standard for consistent measurements As a Grade 1 reference, this end measure is manufactured to meet DIN EN ISO 3650, supplying a stable baseline for dimensional checks and calibration tasks. The standardised tolerance class makes it suitable where reliable, repeatable reference values are required, for instance when verifying gauges, setting up inspection fixtures or confirming machining output. The calibrated nature of the product class provides confidence in the measurement chain and helps to reduce rework through early detection of deviations. Durable construction that reduces measurement uncertainty Made from hardened special steel, the piece combines wear resistance with dimensional stability across repetitive use. The 35 x 9 mm cross-section provides increased stiffness relative to slimmer profiles, so straightness and flatness are preserved under typical handling. At approximately 1 kg, the item balances mass for stable contact without being cumbersome during routine checks. These attributes translate into fewer refixturings and more consistent contact points, improving day-to-day throughput in quality control processes. Practical benefits for inspection routines With a nominal length of 250 mm, the gauge fits standard inspection benches and portable measuring sets while covering common component sizes found in metalworking and assembly operations. The clear specification and identifiable markings facilitate fast selection and traceability — the product is listed as M320.250.1 and carries GTIN 4054469132457 for unambiguous stock and record-keeping. Using a standardised end measure simplifies audit trails and supports internal quality procedures by providing an objective reference for comparative measurements. Where this end measure adds value This robust, standards-compliant reference is well suited to machine shops, toolrooms and incoming inspection stations where dependable short- to medium-length references are necessary. The combination of a compact footprint, hardened special steel and Grade 1 tolerances makes it an efficient choice for routine verification, OEE-focused quality loops and as a stable reference within gauge sets. Integration into existing workflows is straightforward due to the conventional dimensions and industry-standard compliance. For reliable Grade 1 reference standards and professional advice, contact Metav Werkzeuge in Emmerich — our specialists will recommend the right end measure configuration and supply logistics to match the inspection requirements of your operation. Technical Data Article number: M320.250.1 GTIN: 4054469132457 Manufacturer brand: Metav IndustryLine Facts Nominal size: 250 mm Weight: 1 kg Cross-section: 35 x 9 mm Special features Material: Special steel, hardened Grade: 1 Standard: DIN EN ISO 3650 TARIC / customs code: 90173000 FAQ What level of accuracy does this end measure provide? The end measure is manufactured to Grade 1 tolerances under DIN EN ISO 3650, offering a calibration-grade reference suitable for routine laboratory and workshop verification. Is the material suitable for long-term shop-floor use? Yes; the hardened special steel construction gives high wear resistance and dimensional stability, making the gauge suitable for repeated handling and standard inspection cycles. How is the product identified for inventory and traceability? The product is listed as M320.250.1 and carries GTIN 4054469132457, enabling clear stock management and traceability in quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
281.2 mm Calibration Gauge Grade 1 DIN 861/1, DIN EN ISO 3650/1 - Metav IndustryLine
Take advantage of Grade 1 precision, a stable 281.2 mm reference length and robust special steel construction to secure reproducible dimensional checks and reliable calibration workflows. Order the calibration end gauge directly via Metav Werkzeuge or consult our specialists for application-specific advice. Metav IndustryLine Calibration End Gauge 281.2 mm – Grade 1, DIN EN ISO 3650/1 The Calibration End Gauge 281.2 mm is a Grade 1 precision reference intended for dimensional verification and calibration tasks in metrology laboratories and inspection benches. Grade 1 accuracy per DIN 861/1 281.2 mm reference length for traceable checks Special steel construction for thermal stability Measurable accuracy for dependable calibration results The Grade 1 classification denotes a high level of geometric tolerance suitable for routine laboratory and workshop calibration. With a reference length of 281.2 mm, this end standard provides a stable datum for verifying length measuring instruments and setting up inspection equipment. Conformity to recognised standards ensures that measurements taken against this reference are comparable and reproducible across different instruments and sites, supporting in‑house quality assurance and calibration protocols. Stable construction that reduces measurement uncertainty Manufactured from special steel, the gauge offers improved dimensional stability and resistance to thermal drift compared with softer materials. The mass of approximately 1.9 kg contributes to handling stability when placed on an inspection surface, reducing susceptibility to small disturbances during comparisons. These construction choices translate into a lower risk of measurement noise and more consistent reference performance during routine checks of calipers, micrometres and other length gauges. Designed for integration into calibration workflows As a precision reference, the end measure functions as a reliable component in traceable calibration chains and inspection procedures. Its clear reference length and Grade 1 tolerance make it suitable for daily verification tasks, batch checks and as a workshop reference for setting measuring machines. Documentation elements such as article identifiers and standard references support inventory management and process traceability when the end gauge is used within accredited quality systems. For a robust, workshop‑ready reference from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored procurement and technical guidance. Technical data Article number: M318.210 GTIN: 4054469128122 ECLASS: 21170109 Customs tariff number: 90173000 Facts Length: 281.2 mm Weight: 1.9 kg Grade: 1 Material: Special steel Standard: DIN EN ISO 3650/1 Special features Intended use: Reference standard for dimensional verification and calibration Suitable for verification of calipers and length gauges Robust construction for reduced thermal and mechanical distortion FAQ What tolerance class does this end gauge have and what does it mean? The end gauge is specified as Grade 1; this indicates a tight geometric tolerance band suitable for reliable workshop and laboratory calibration tasks where reproducible reference values are required. Can the gauge be used to verify digital and analogue calipers? Yes, the Calibration End Gauge 281.2 mm can be used as a reference for both digital and analogue calipers and for routine checks of length measuring instruments in a calibration workflow. What material is the gauge made from and why is that important? The gauge is made from special steel; this material choice enhances dimensional stability and reduces thermal expansion effects, which helps maintain consistent measurement results. Is the standard noted on the product the same as the listed norm? The product references recognised metrology standards to ensure compatibility with common calibration practices; the supplied technical data lists the applicable standard for documentation and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
The combination of Grade 1 dimensional accuracy and the thermal stability of a ceramic body makes this small reference a dependable choice for repeatable measurements in both laboratory and workshop environments. Its compact 3 mm nominal size and light weight support ease of handling while maintaining traceable standards. Order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 3 mm, Grade 1 DIN 861/1 — Metav IndustryLine precision gauge block The Ceramic gauge block 3 mm, Grade 1 DIN 861/1 is a compact, dimensionally stable reference standard designed for calibration and precision setting in metrology and workshop processes. Grade 1 accuracy according to DIN 861/1 Low thermal expansion ceramic body Nominal 3 mm reference for precision setups Exceptional stability for repeatable measurements A Grade 1 reference provides a verified tolerance class under DIN 861/1, ensuring measurement reproducibility in calibration chains and routine checks. The ceramic composition contributes to low thermal expansion, reducing length variation with temperature shifts and therefore lowering measurement drift when compared with many metallic standards. For applications where repeatability is critical—such as gauge calibration, comparator set‑ups or master reference inspections—this reference block offers a stable baseline that supports consistent decision-making and process reliability. Compact form that integrates easily into workflows The small 3 mm nominal size and feather-light mass suit confined workstations, gauge nests and transfer standards where space and quick handling are priorities. Its compactness speeds up set-up times on optical comparators, height gauges and comparator stands while preserving the precision expected from a Grade 1 reference. Where throughput and traceability matter, the block’s form factor minimises fixturing effort and simplifies handling in repetitive inspection routines without sacrificing measurement confidence. Durable ceramic construction for long service life Crafted from ceramic, the block resists corrosion and surface wear better than typical steel counterparts, extending interval periods between reprofiling or replacement. The intrinsic hardness and dimensional stability of the material make it suited to repeated contact measurements with minimal surface alteration, thereby protecting the baseline accuracy of the reference. When supplied with a calibration record, the block supports documented quality systems and helps maintain audit-ready inspection practices. Contact Metav Werkzeuge for technical clarification and to source this Metav IndustryLine ceramic gauge block through our Emmerich quality filter Technical data Article number: M324.003 GTIN: 4054469142944 Category: Endmasse Facts Nominal size: 3 mm Weight: 0.005 kg Grade: 1 (DIN 861/1) Customs tariff number: 90173000 Special features Material: Ceramic Precision reference standard Compact, low-mass format FAQ What tolerance class does this gauge block meet? The block meets Grade 1 tolerances as defined by DIN 861/1, offering a certified level of dimensional accuracy suitable for calibration and reference use. Is the gauge block supplied with a calibration document? A calibration certificate is available on delivery where applicable; the Metav IndustryLine ceramic gauge block can be documented to support traceability within quality systems. Can this block be used for comparator and master-setting tasks? Yes, the compact 3 mm form and stable ceramic properties make it suitable as a master reference for optical comparators, height gauges and transfer standards. How should the block be stored to preserve accuracy? Store the block in a stable, dust-free environment at moderate temperature and avoid sudden thermal shocks; routine visual inspection will help detect any surface contamination before use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3 mm Gauge Block Grade 1, DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Reliable workshop reference thanks to DIN EN ISO 3650 Grade 1 accuracy and a hardened special steel construction, combined with the compact 3.000 mm nominal size for quick verification tasks. Order the end gauge directly via Metav Werkzeuge or ask our consultants if needed. End gauge 3 mm (DIN EN ISO 3650, Grade 1) — by Metav IndustryLine The End gauge 3 mm is a compact dimensional standard for fast, repeatable checks in workshop metrology and incoming‑goods inspection. DIN EN ISO 3650 conformity, Grade 1 Hardened special steel construction Nominal size 3.000 mm for precise checks Consistent accuracy for routine verification As a DIN EN ISO 3650 Grade 1 reference, this compact standard provides a measurable baseline for everyday inspection tasks. The Grade 1 class limits geometric and dimensional deviation to a level suited for workshop and production control, making this gauge an efficient tool for verifying micrometre adjustments, plug gauges and calibration jigs. The result is fewer measurement disputes and faster go/no‑go decisions during quality checks. Durable construction that reduces rework Made from hardened special steel, the gauge resists wear during repeated contact checks and maintains form stability over time. The robust material choice minimises surface damage and preserves critical reference faces, which reduces the need for frequent replacement or regrinding. This durability translates into lower interruption rates on the production floor and a more predictable inspection routine. Compact format for fast handling and storage The compact 3 mm nominal size and slim cross profile make the standard easy to pick up, position and compare without cumbersome fixtures. The lightweight construction helps rapid sequential checks on small machined parts and tooling. Handling ergonomics shorten cycle times for inspection steps and keep verification close to the workpiece, improving workflow efficiency in small‑part production. Clear role in traceable quality processes Used as a reference standard, the gauge supports traceable checks and repeatable setups in assembly or machining operations. Its nominal size and conformity to the established standard mean it integrates smoothly into existing inspection plans or checklists. The simple, unambiguous reference value reduces interpretation errors and supports consistent in‑house quality documentation. Choose Metav IndustryLine’s 3 mm end gauge for dependable workshop standards — contact Metav Werkzeuge in Emmerich for procurement guidance and specification clarification. Technical data Article number: M319.030.1 GTIN: 4054469131290 Tariff number: 90173000 Facts Nominal size: 3.000 mm Weight: 0.007 kg Cross-section: 30 x 9 mm Tolerance grade: 1 Special features Material: Hardened special steel Standard: DIN EN ISO 3650 Category: End gauges FAQ What tolerance class does this gauge comply with? The gauge conforms to DIN EN ISO 3650 in Grade 1, providing the dimensional control expected for workshop verification and routine inspection tasks. What material is used for the gauge and how does it affect longevity? Constructed from hardened special steel, the gauge retains form stability and resists wear during repeated contact checks, which supports longer service life and fewer replacements. Is this product suitable for small‑part inspection and quick checks? Yes. The compact 3.000 mm nominal size and slim profile make it particularly suitable for rapid verification of small machined parts and tooling setups. What identification is available for ordering or inventory? Order and inventory identification is via SKU M319.030.1 and GTIN 4054469131290 for consistent traceability. Can this end gauge be used as a reference in a shop floor quality plan? The Grade 1 classification and standard compliance make it suitable as a reference standard for shop floor verification and routine control procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3 mm Gauge Block, Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Combining Grade 0 accuracy, hardened special steel and conformity to DIN EN ISO 3650, this 3 mm gauge block provides a reliable reference for workshop measurements and basic calibration tasks. Order the gauge block directly via Metav Werkzeuge or consult the technical team for matching sets and traceability options. Single gauge block M319.030.0 — 3 mm, Grade 0, DIN EN ISO 3650 (Metav IndustryLine) The Single gauge block M319.030.0 is a compact, precision reference intended for setting and verifying measurement equipment in calibration, inspection and workshop environments. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Precision-ground measuring faces Compact cross-section 30 x 9 mm Accurate reference for reliable measurement chains A Grade 0 slip gauge in accordance with DIN EN ISO 3650 serves as a stable reference for routine verification and adjustment of measuring instruments. By providing a defined nominal 3 mm length with industrial tolerance, the element reduces uncertainty when setting micrometres, callipers and gauge blocks in a reference stack. The clear conformity to the international standard supports comparable results across different instruments and shifts the focus from guesswork to quantifiable measurement performance. Robust construction that eases everyday handling Manufactured from hardened special steel, the element combines wear resistance with dimensional stability. The precision-ground measuring faces and the compact 30 x 9 mm cross-section for sizes up to 10 mm allow safe manipulation in a busy workshop; the low mass (approx. 0.007 kg) minimises thermal influence during short handling periods. These characteristics ensure the reference value remains repeatable over many cycles, which in turn lowers rework and inspection times. Practical use and system compatibility The block is suited for use as a single reference or as part of a set when building certified lengths. Its nominal size and standardised tolerance make it compatible with common metrology procedures in production control and basic calibration labs. As a standardised end measure, the element integrates smoothly into measurement routines, supporting traceable results and consistent process decisions. For traceability, consult Metav Werkzeuge about calibration and set options that match internal quality systems. Contact Metav Werkzeuge for supply, set configuration and calibration guidance tailored to Metav IndustryLine gauge blocks Technical Data Article number: M319.030.0 GTIN: 4054469131283 Norm: DIN EN ISO 3650 Facts Nominal size: 3 mm Tolerance grade: 0 Weight: 0.007 kg Cross-section: 30 x 9 mm Special features Material: special steel, hardened Precision-ground measuring faces Category: end mass / gauge block FAQ What tolerance standard does this gauge block meet? The Single gauge block M319.030.0 meets Grade 0 tolerances according to DIN EN ISO 3650, providing a calibrated reference suitable for workshop and basic laboratory verification. Is the block suitable for use in a calibration laboratory? Yes; the block is intended as a reference element for setting and checking measuring equipment in calibration and inspection environments, though full laboratory workflows may require traceable calibration documentation. What material is used and how does it affect durability? The element is made from hardened special steel, which offers good wear resistance and dimensional stability for repeatable reference measurements. What handling considerations apply to this compact element? The compact 30 x 9 mm cross-section and low mass reduce thermal transfer during handling; normal good practice—clean faces and avoid fingerprints—helps preserve dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5 mm Gauge Block, Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of Grade 1 accuracy and a compact, hardened-steel construction to secure a stable reference length for workshop and laboratory checks; order the gauge block directly via Metav Werkzeuge or ask the consultants for specification advice. Gauge block 3.5 mm – End gauge, Grade 1, DIN EN ISO 3650 (Metav IndustryLine) A gauge block 3.5 mm intended as a precision reference for length calibration and inspection in metrology, toolmaking and quality control. Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel construction Compact 30 x 9 mm cross-section for 3.5 mm Consistent reference performance for routine calibration and inspection The gauge block functions as a reference standard for comparative measurements and routine checks on calibration benches. Manufactured to DIN EN ISO 3650 specifications and classified as Grade 1, the block provides a dependable nominal length of 3.5 mm, giving clear benefits where repeatability and minimal uncertainty are required in day‑to‑day inspection. The special hardened steel substrate offers dimensional stability and resistance to wear, supporting consistent measurement outcomes over many cycles. Practical form factor that fits workshop workflows With a compact 30 x 9 mm cross-section applicable for the 3.5 mm size, the component is easy to handle and store in precision tool sets. The small mass and modest footprint simplify integration into inspection sequences, jigs and comparison stacks without demanding excessive bench space. The nominal length is produced with attention to manufacturing tolerances, so the block serves well as a portable reference for toolrooms, maintenance departments and laboratory calibration kits. Confidence through traceable quality and proven supply Sourcing from Metav IndustryLine gives access to a European quality filter in Emmerich that supports reliable availability and specification control. The product is listed under SKU M319.035.1 and is suitable for professionals in machining, metrology and process control who prioritise clear standards and dependable repeatability. The construction material and conformity to recognised norms underline a pragmatic balance of longevity and practicality for everyday quality assurance tasks. Contact Metav Werkzeuge for specification advice or to secure this Grade 1 gauge block directly from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M319.035.1 GTIN: 4054469131313 Weight: 0.007 kg Facts Nominal length: 3.5 mm Cross-section (≤ 10 mm): 30 x 9 mm Classification: Grade 1 Special features Material: special steel, hardened Standard: DIN EN ISO 3650 Tariff code: 90173000 eClass: 21170108 FAQ What tolerance class does this gauge block follow? The gauge block follows Grade 1 according to DIN EN ISO 3650; the gauge block 3.5 mm is manufactured to that standard for consistent reference use. Which material is used for the block and why? The block is made from special hardened steel, chosen for its dimensional stability and wear resistance; this material supports the long‑term use of the Metav IndustryLine gauge block (SKU M319.035.1). For which applications is the 3.5 mm size suitable? The 3.5 mm reference is well suited to calibration tasks, comparative length checks and quality control in toolmaking and precision workshops where compact reference standards are needed. How is the block identified in stock and documentation? This product is listed under SKU M319.035.1 and GTIN 4054469131313, facilitating traceability in procurement and inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
High measurement stability is provided by the combination of a ceramic body and Grade 1 tolerance (DIN 861/1), making this a dependable reference for routine calibration and setup; the 3.5 mm nominal size integrates easily into precision stacks. Order directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 3.5 mm, Grade 1 (DIN 861/1) — Precision reference, ceramic material The Ceramic gauge block 3.5 mm, Grade 1 DIN 861/1 is a compact precision standard intended for calibration, inspection and the assembly of reference stacks in workshop and laboratory metrology. Precision grade 1 per DIN 861/1 Ceramic material with thermal stability Nominal length 3.5 mm for reference stacks Lightweight 0.007 kg for easy handling Consistent reference accuracy for process control A compact reference block such as this provides a stable datum for short-range measurement tasks. The combination of Grade 1 tolerance according to DIN 861/1 and the intrinsically stable ceramic substrate reduces measurement uncertainty when used as a single standard or as part of a stack. This increases repeatability in routine quality checks and helps maintain production tolerances without frequent recalibration, supporting faster decisions in inspection workflows. Material advantages that reduce environment‑related drift Ceramic construction offers low thermal expansion and high wear resistance compared with many metals, which translates into thermal stability and minimal wear under typical workshop conditions. The material’s resistance to corrosion and surface degradation preserves the block’s measuring faces, so dimensional integrity is retained over many cycles. These properties lower the long‑term cost of ownership by extending service intervals and reducing the need for corrective adjustments. Compact handling and integration into metrology kits With a nominal length of 3.5 mm and a weight of approximately 0.007 kg, this precision block is easy to include in a gauge block set or to carry for on‑bench use. Its small footprint is ideal for creating reference stacks for fixture set‑up, machine probing checks or calibration of small parts. Correct handling—cleaning measuring faces before stacking and avoiding shocks—ensures optimal performance and preserves the block as a reliable reference in daily measurement routines. For expert advice on integrating this Metav IndustryLine reference into measurement routines or to arrange supply from Metav Werkzeuge in Emmerich, contact our consultants for tailored recommendations and rapid delivery. Technical Data Article number: M324.003.5 GTIN: 4054469142951 Tariff code: 90173000 Facts Nominal length: 3.5 mm Weight: 0.007 kg Tolerance grade: Grade 1 (DIN 861/1) Special features Material: Ceramic Category: Gauge block Precision reference for calibration and setup FAQ What applications is this ceramic gauge block suitable for? The ceramic gauge block 3.5 mm, Grade 1 DIN 861/1 is suited to calibration, reference stacking and short‑range inspection tasks in workshop and laboratory environments. How does the ceramic material affect thermal behaviour? Ceramic offers low thermal expansion and high stability, so the gauge block exhibits reduced thermal drift compared with many metallic standards. Is this block compliant with a recognised tolerance standard? Yes, the product meets Grade 1 tolerances as specified in DIN 861/1, providing a documented precision class for traceable measurements. Can the block be used in a stack with other sizes? The 3.5 mm nominal length is intended for inclusion in reference stacks; care in cleaning and correct stacking technique preserves accuracy and repeatability. How should the gauge block be stored to maintain accuracy? Store the block in a clean, dry environment and avoid mechanical shocks; regular inspection of measuring faces will help maintain the reference condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5mm Gauge Block Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a traceable, workshop-ready length standard with proven DIN EN ISO 3650 compliance and Grade 0 accuracy, combined with a hardened special-steel body for long service life; order directly from Metav Werkzeuge or contact the team for procurement advice. Single Gauge Block 3.5 mm – DIN EN ISO 3650, Grade 0 (Metav IndustryLine) A Single Gauge Block 3.5 mm that serves as a compact, stable length reference for calibration, setting and inspection tasks in laboratory and workshop metrology. Grade 0 accuracy per DIN EN ISO 3650 Hardened special steel construction Compact 30 x 9 mm cross-section Reference standard for repeatable measurements This compact length standard provides a stable reference for setting comparators, micrometres and measuring stands. Produced to DIN EN ISO 3650, the block offers Grade 0 specification suitable for routine laboratory checks and precision workshop applications. The nominal dimension of 3.5 mm makes it ideal for assembling calibrated stacks or for direct use where a small, highly stable reference is required. The block’s geometry and surface finish support reliable wringing and stacking without the need for further treatment. Durable design that supports measurement integrity Manufactured from hardened special steel, the single block resists wear and preserves its dimensional integrity under normal workshop conditions. The compact cross-section of 30 x 9 mm (applies to sizes up to 10 mm) balances rigidity and handling convenience, allowing secure clamping in fixtures and easy placement during calibration procedures. Lightweight at approximately 0.007 kg, the block can be integrated into portable kits or combined into bespoke sets while maintaining consistent surface contact and repeatability over many measurement cycles. Practical integration into quality workflows The component is supplied as an individual end measure suitable for inclusion in gauge sets or as a stand-alone reference for bench checks and instrument set-up. Traceability to DIN EN ISO 3650 supports documented quality processes, and the clear, compact format simplifies storage and identification in busy inspection areas. Where precise assembly of stacks is required, the block’s standardised dimensions and finish facilitate rapid, reproducible results and reduce downtime in routine control tasks. For procurement or to confirm suitability for specific inspection procedures, contact Metav Werkzeuge regarding the Metav IndustryLine single gauge block and available delivery options from Emmerich. Technical Data Article number: M319.035.0 GTIN: 4054469131306 Tariff number: 90173000 Weight: 0.007 kg Dimensions & Core Data Nominal size: 3.5 mm Cross-section (up to 10 mm): 30 x 9 mm Quality grade: 0 Category: Endmasse Materials & Standards Material: hardened special steel Standard: DIN EN ISO 3650 FAQ What is the intended use of this block? The single gauge block is intended as a length reference for calibration tasks, instrument setting and stack assembly in workshop and laboratory metrology; the Single Gauge Block 3.5 mm from Metav IndustryLine is suited for these routines. Is the block compliant with recognised standards? Yes. The block is manufactured to DIN EN ISO 3650 and specified as Grade 0 for precision reference work. What material and cross-section does the block have? The block is made from hardened special steel and uses a 30 x 9 mm cross-section for dimensions up to 10 mm, combining rigidity with convenient handling. Can this gauge block be integrated into an existing set? Integration is straightforward; the Single Gauge Block 3.5 mm (SKU M319.035.0) is compatible with standard wringing and stacking procedures used in gauge block sets. How can technical suitability or supply be checked? For confirmation of fit or delivery options, contact Metav Werkzeuge with the product reference M319.035.0 and the Metav IndustryLine designation Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30 mm Gauge Block, DIN EN ISO 3650 Grade 1, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 conformity, Grade 1 tolerance and a hardened special steel construction for a stable reference standard in daily workshop use. Order the End gauge 30 mm directly via Metav Werkzeuge or ask our consultants if needed. End gauge 30 mm — DIN EN ISO 3650, Grade 1 (Metav IndustryLine) the End gauge 30 mm, DIN EN ISO 3650, Grade 1 is a precision reference for dimensional control and calibration tasks in production and inspection environments DIN EN ISO 3650 compliant end gauge Grade 1 tolerance for reliable reference measurements Hardened special steel for long-lasting stability Certified accuracy for reproducible measurements This reference gauge is manufactured to DIN EN ISO 3650 and delivered as a Grade 1 end standard, offering a dependable basis for routine calibration and verification tasks. As a hardened reference in 30 mm nominal size, it provides traceable accuracy suitable for incoming inspection and in-process checks. The declared manufacturing tolerance supports a rational, efficiency-driven workflow: fewer measurement-related rejects, predictable inspection outcomes and clearer pass/fail decisions in production control. Robust material and cross-section for handling and wear resistance Made from hardened special steel, the gauge resists wear and maintains edge definition over prolonged use, which reduces the need for frequent replacements. For sizes above 10.1 mm the typical cross-section is 35 x 9 mm, giving the component the profile stiffness required for consistent perpendicular seating and minimal deformation under handling. The material choice and profile deliver practical longevity in workshop environments where repeated contact and manual handling are common. Integration into quality procedures and practical logistics Designed as a portable reference, this end gauge is suitable for quality departments, toolrooms and calibration benches as a repeatable standard. Identification data such as SKU: M319.300.1 and GTIN: 4054469132198 simplify ordering and traceability in inventory systems. At 0.073 kg the piece is easy to handle and to include in gauge sets; its DIN classification supports harmonised documentation and simpler supplier communication when establishing control limits or audit trails. Choose the Metav IndustryLine Grade 1 end gauge for dependable reference measurements and contact Metav Werkzeuge for tailored technical advice or procurement support. Technical data Article number: M319.300.1 GTIN: 4054469132198 Tariff code: 90173000 Facts Nominal size: 30 mm Weight: 0.073 kg Standard: DIN EN ISO 3650 Special features Material: hardened special steel Grade: 1 Cross-section: bis 10 mm → 30 x 9 mm; ab 10,1 mm → 35 x 9 mm ECLASS: 21170108 FAQ What tolerance class does this end gauge meet? The end gauge meets Grade 1 according to DIN EN ISO 3650, providing a reliable reference tolerance for workshop and inspection use. Which material is used for the gauge? The gauge is produced from hardened special steel, chosen for wear resistance and dimensional stability in routine calibration and inspection tasks. Is this gauge suitable as a portable reference in the workshop? Yes. With a nominal size of 30 mm, low weight and robust construction, this end gauge serves well as a portable reference and is straightforward to include in standard gauge sets. How can the item be identified for reordering or stock management? Use SKU: M319.300.1 or GTIN: 4054469132198 to locate and reorder the Metav IndustryLine end gauge efficiently. What documentation accompanies the gauge? The delivery includes the specified reference gauge and identification details for traceability; for specific calibration certificates please consult Metav Werkzeuge if further documentation is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30 mm Gauge Block, Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 conformity, Grade 0 accuracy and hardened special steel for a reliable reference that supports precise set‑ups and calibration routines — order the gauge block directly via Metav Werkzeuge or consult the team for purchasing advice. Gauge block, single, 30 mm — Grade 0 precision, DIN EN ISO 3650 (Metav IndustryLine) The single 30 mm gauge block is a compact reference standard for dimensional setting and verification in workshop and laboratory environments, designed for routine calibration and accurate length references. DIN EN ISO 3650 — Grade 0 accuracy Hardened special steel construction Nominal length 30 mm for reference stacks Cross-section 35×9 mm for stable handling Precision where repeatability matters A Grade 0 reference made to DIN EN ISO 3650 provides a consistent baseline for length measurements and tool settings. As a certified production standard, this block reduces measurement variation when used as a reference for micrometres, calipers and comparator setups. The 30 mm size fits common reference stacks and simplifies set-up times, helping to keep production tolerances tight. The combination of standard conformity and compact geometry supports traceable processes without introducing unnecessary handling complexity. Durable construction for everyday metrology Manufactured from hardened special steel, the block resists wear and maintains its dimensional integrity through repeated use, which lowers replacement frequency and long‑term costs. The specified 35×9 mm cross-section for this length gives a stable contact area for gauge block wringing and for use in fixtures, improving thermal and mechanical stability during measurement. Robust material selection also means the block tolerates workshop conditions better than untreated variants, preserving calibration intervals and ensuring dependable reference performance. Practical benefits for workshop and quality control At 30 mm, the reference block serves as a versatile base length: it integrates easily into common gauge block sets and speeds up routine checks and adjustments. The compact weight and form factor support efficient handling during calibration cycles and reduce operator fatigue in repetitive tasks. Supplied as a singular reference, this block is a practical addition for inspection rounds, tool set‑up and interim verification, delivering measurable improvements in process reliability and part quality with minimal training required. Choose the Metav IndustryLine 30 mm gauge block for dependable reference standards — order through Metav Werkzeuge for confident supply from Emmerich or request specialist advice to match this block to existing calibration workflows Technical Data Article number: M319.300.0 GTIN: 4054469132181 SKU: M319.300.0 Facts Nominal length: 30 mm Weight: 0.073 kg Tariff code: 90173000 Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 0 Cross-section: 35×9 mm for 30 mm block Category: End gauges (gauge blocks) FAQ What level of accuracy does this gauge block offer? The single 30 mm gauge block is supplied to Grade 0 tolerance under DIN EN ISO 3650, providing a high‑precision reference suitable for routine workshop and laboratory use. Is the block suitable for use in gauge block stacks? Yes, the 30 mm block is intended as a reference length and can be combined in gauge block stacks to achieve a wide range of nominal dimensions for calibration and setting tasks. What material is the block made from and why does it matter? The block is made from hardened special steel, chosen for its wear resistance and dimensional stability, which helps maintain reference accuracy over repeated use. Can this block be used for comparator set‑ups and tool offsets? Its 30 mm nominal length and stable cross‑section make the block well suited as a reference for comparator set‑ups and for establishing tool offsets in workshop routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30 x 15 mm Plane Glass Flatness 0.1 µm, 12 mm Thick - Metav IndustryLine
Take advantage of the combination of ultra-fine flatness (0.1 µm), a compact 30 x 15 mm footprint and easy handling for reliable surface checks in confined inspection stations. Order this precision reference directly via Metav Werkzeuge or consult our specialists for integration advice. Planglas, 30 x 15 mm – Flatness reference glass 0.1 µm (Metav IndustryLine) The Planglas, 30 x 15 mm is a compact flatness reference glass designed for precise surface inspection and checking of small parts in quality-control and calibration workflows Flatness accuracy 0.1 µm Compact 30 × 15 mm footprint Low weight 0.1 kg for easy handling Consistent measurement quality for surface inspection The glass reference delivers a clearly defined reference plane with a flatness of 0.1 µm, enabling repeatable comparisons against component faces and small workpieces. Such a tolerance places it in the category of high-precision inspection aids suitable for fine mechanical checks and optical alignment tasks. By using a stable, machined glass surface as the reference, systematic measurement deviations caused by uneven supporting surfaces are minimised, which supports reliable pass/fail assessments in production and incoming inspection. Space-saving format that fits tight inspection stations Measuring 30 x 15 mm with a nominal thickness of 12 mm, the reference is sized for compact vice jaws, microscope stages and small bench fixtures where larger plates would be impractical. The small footprint combined with a weight of 0.1 kg makes it simple to position and manoeuvre without auxiliary handling tools, while retaining sufficient cross-section to avoid easy warping. This format is particularly useful where quick visual or tactile verification is required without dedicating large bench space to reference artefacts. Integrates readily into workshop routines and calibration chains As a purpose-made parallel pad for flatness checks, the unit is well suited to everyday control tasks such as verifying datum faces, setting up measuring microscopes, or checking planarity before assembly. The specimen offers a clear, stable reference plane for short-range comparisons and is particularly valuable when high-resolution flatness verification is needed on small parts. Its traceable specification and compact design support efficient workflows in tool rooms, small-batch production and laboratory test benches. Choose the Metav IndustryLine flatness reference for repeatable surface checks and contact Metav Werkzeuge for tailored integration or product advice from our Emmerich-based team Technical data Article number: M318.221 GTIN: 4054469128160 Customs tariff: 90173000 Facts Dimensions: 30 x 15 mm Thickness: 12 mm Flatness: 0.1 µm Weight: 0.1 kg Category: Parallelunterlagen (parallel pads) Special features Material: glass reference surface Primary use: flatness inspection and reference checks Suitable for small-part inspection and microscope stages FAQ What level of flatness does this reference provide? The Planglas reference offers a flatness accuracy of 0.1 µm, making it suitable for fine inspection and small-scale calibration tasks. Can the reference be used on microscope stages? Yes, the compact 30 x 15 mm format and low weight make the item appropriate for use on microscope stages and other confined fixtures. Is this product suitable for routine workshop checks? The glass reference is designed for routine surface checks and quick verification of datum faces in tool rooms and small-batch production. How is the item identified in ordering systems? Order or reference the product using article number M318.221 and GTIN 4054469128160. What are the primary applications for this reference pad? Typical applications include planarity checks, optical alignment, setting up measuring devices and short-range calibration comparisons Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30/41.3/131.4 mm Calibration Gauge Set With Setting Rings 4+25, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of Grade 1 accuracy, hardened special steel construction and protected transport to keep calibration cycles short and measurement uncertainty low. Order the calibration set directly via Metav Werkzeuge or contact our consultants for technical advice and supply arrangements. Calibration set for calipers M318.204.N — Grade 1 end standards, hardened special steel The Calibration set for calipers M318.204.N supplies Grade 1 end standards for quick verification of precision calipers and routine inspection tasks in workshops and quality labs. Grade 1 calibration standard Hardened special steel construction Included setting rings 4 mm and 25 mm Supplied in transport case Reliable reference standards for consistent measurements The set contains high-stability end standards manufactured to Grade 1, providing a dependable reference for verifying caliper accuracy. Conformance with DIN EN ISO 3650 and VDI/VDE/DGQ 2618 ensures that readings can be traced to recognised norms, which simplifies documentation in quality control processes. Using certified end standards reduces rework and inspection time because measurement deviations are identified quickly, enabling decisive corrective actions in production or maintenance workflows. Robust material and protected transport extend service life Made from special steel, aged and hardened, the standards resist wear and retain flat, stable surfaces that are essential for repeatable calibration. The thermal and mechanical stability of the material lowers the risk of surface deformation during routine handling. Supplied in a protective transport case, the components are safeguarded against knocks and contamination during storage or on-site movement, preserving their calibration state and extending service life for long-term use in demanding workshop environments. Practical setup and routine verification made efficient The set includes precision end dimensions of 30 mm, 41.3 mm and 131.4 mm, plus setting rings of 4 mm and 25 mm, enabling stepwise checks across a caliper's measuring range and allowing straightforward zero and scale verification. These reference sizes help to confirm both external and internal measuring performance and to spot linearity errors across the instrument's travel. Clear conformity to established standards supports efficient audit preparation and reduces downtime during scheduled maintenance cycles, making the set a pragmatic choice for inspection benches and calibration routines. Request supply or tailored calibration advice from Metav Werkzeuge for this Grade 1 set; Metav IndustryLine specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to arrange delivery or answer technical questions Technical Data Article number: M318.204.N GTIN: 4054469128047 Tariff number: 90173000 Weight: 1 kg Data Accuracy grade: 1 Sizes: 30 mm / 41.3 mm / 131.4 mm Setting rings: 4 mm, 25 mm Pieces per set: 5 Materials & Standards Material: special steel, aged and hardened Standards: DIN EN ISO 3650; VDI/VDE/DGQ 2618 Supplied in transport case FAQ What accuracy class do these end standards provide? The set delivers Grade 1 accuracy in accordance with DIN EN ISO 3650, providing a stable reference for routine caliper verification with the M318.204.N calibration set. Which reference sizes and accessories are included? Reference dimensions of 30 mm, 41.3 mm and 131.4 mm are included, together with setting rings of 4 mm and 25 mm for scale checks and zero verification. Is this set suitable for workshop and inspection use? Yes; the materials and compliance with VDI/VDE/DGQ 2618 make the set appropriate for both workshop calibration and inspection bench routines where traceable reference standards are required. How is the calibration set delivered and protected? The components are supplied in a transport case to protect measuring faces during storage and transit, ensuring long-term reliability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30/41.3/131.4 mm Ceramic Gauge Block Set 5-Piece With Setting Rings 4 mm + 25 mm, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of a compact, traceable reference that combines Grade 1 accuracy and thermally stable ceramic end gauges for dependable caliper verification; order the set directly via Metav Werkzeuge or ask the consultants for application advice. Calibration set for calipers M318.204.K (5-piece, Grade 1 ceramic end gauges) by Metav IndustryLine A calibration set for calipers M318.204.K engineered as a reliable reference for routine verification and adjustment of workshop and quality-control calipers. Grade 1 accuracy per DIN EN ISO 3650 Ceramic end gauges for thermal stability Includes hardened-steel setting rings Five-piece set for common calibration tasks Dependable reference standards that reduce rework and downtime This five-piece set provides a straightforward way to verify the measuring performance of hand-held calipers and comparators, delivering repeatable reference values that shorten inspection loops and reduce the risk of rework. The combination of a clearly defined accuracy class (Grade 1) and standardised nominal lengths makes the set suitable as a routine check standard in production testing and incoming‑inspection stations. By using certified reference gauges as the baseline, measurement uncertainty at the workplace is reduced, enabling faster quality decisions and fewer production interruptions. Materials and dimensional stability explained for consistent readings The set comprises ceramic end gauges alongside hardened‑steel setting rings, with nominal sizes of 30 mm, 41.3 mm and 131.4 mm, plus setting rings at 4 mm and 25 mm, supplied as a cohesive five‑piece kit. Ceramic offers superior resistance to temperature‑induced expansion compared with many metals, which means the gauge values remain more stable during short temperature fluctuations commonly found in workshop environments. The hardened steel rings combine wear resistance with secure fitting for quick calibration tasks. Conformance to DIN EN ISO 3650 and VDI/VDE/DGQ 2618 underlines the set’s suitability for standardised calibration procedures. Practical benefits for workshop and laboratory workflows Designed to integrate with standard calipers and portable verification routines, this set simplifies on‑the‑bench checks and helps maintain traceability across inspection records. As a compact verification kit, it supports rapid pass/fail decisions and reduces the frequency of full instrument returns to the metrology lab. The Grade 1 classification ensures that the gauges are precise enough for most machine‑shop and metalworking quality checks while remaining economical for everyday use. For organisations seeking a pragmatic balance between accuracy and workflow efficiency, this calibration kit functions as a reliable reference point within a structured measurement regime. Choose Metav IndustryLine’s Grade 1 calibration set for calipers M318.204.K as a practical reference standard and contact Metav Werkzeuge for ordering or detailed product information at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M318.204.K SKU: M318.204.K GTIN: 4054469128030 Category: Endmasse Pieces per set: 5 Facts Nominal sizes: 30 mm / 41.3 mm / 131.4 mm Setting rings: 4 mm and 25 mm Weight: 1 kg Customs tariff number: 90173000 Special features Material: ceramic end gauges, hardened-steel setting rings Accuracy class: Grade 1 Standards: DIN EN ISO 3650; VDI/VDE/DGQ 2618 Set type: calibration/verification set FAQ What accuracy class does the set offer? The calibration set for calipers M318.204.K is specified as Grade 1, meeting the tolerances referenced in DIN EN ISO 3650 and VDI/VDE/DGQ 2618. Which sizes and components are included in the kit? The five‑piece kit contains ceramic end gauges in 30 mm, 41.3 mm and 131.4 mm plus two setting rings of 4 mm and 25 mm, designed for quick verification tasks. Are the materials suited to workshop conditions? Yes; the end gauges are made from ceramic for improved thermal stability, while the setting rings are hardened steel, offering wear resistance for regular reference use. For which applications is this calibration set intended? The set is intended as a practical reference for routine caliper verification in machine shops, inspection benches and quality‑control stations where Grade 1 accuracy is appropriate. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Gauge Block Grade 0 DIN EN ISO 3650, Hardened Special Steel 35x9mm - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 Grade 0 accuracy, a 300 mm nominal length and a hardened special steel construction for reproducible length checks and stable workshop handling. Order the gauge directly via Metav Werkzeuge or ask the consultants for application advice. End gauge 300 mm, DIN EN ISO 3650 — Metav IndustryLine, Grade 0, hardened special steel The End gauge 300 mm is a precision length standard designed for calibration tasks, workshop inspection and comparator checks where a certified reference with DIN EN ISO 3650 conformity is required. DIN EN ISO 3650 — Grade 0 precision Hardened special steel construction Nominal length 300 mm, cross-section 35 x 9 mm Compact weight 1.1 kg for stable handling Reliable measurement basis for production control As a Grade 0 length standard that complies with DIN EN ISO 3650, this gauge provides a consistent reference for comparative measurements and setup tasks. The specified grade denotes a high level of geometric accuracy suitable for calibration benches and length comparators. Relying on a standardised reference reduces scatter in measurement routines and supports repeatable quality checks on production lines. Robust material and stable geometry reduce wear The body is finished from hardened special steel, which combines surface hardness with dimensional stability. The defined cross-section 35 x 9 mm and optimised profile resist bending during routine handling, while the hardened finish limits abrasive wear in contact areas. These material choices minimise rework and maintain the gauge’s functional accuracy over prolonged service intervals. Practical dimensions for workshop and laboratory use With a nominal length of 300 mm and a mass of 1.1 kg, the instrument balances reach and manageability: long enough for common machine‑tool setups yet compact enough for comparator tables and gauge blocks stacks. The format supports quick integration into inspection routines and facilitates transfer measurements between bench and machine, helping to streamline throughput in small and medium series production. Confidence from a specialist partner Supplied under the Metav IndustryLine label, this end measure benefits from Metav’s broad offering and supply reliability. Metav’s position as a precision partner for industry and trade ensures access to documentation, replacement parts and complementary gauges. The combination of standard conformity, robust design and distributor expertise supports a dependable inspection workflow. Contact Metav Werkzeuge to discuss how the Metav IndustryLine end gauge can be integrated into existing calibration procedures or to request a formal quotation: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; +49 2822 7131930; info@metav-werkzeuge.com Technical data Article number: M320.300.0 GTIN: 4054469132464 Manufacturer: Metav IndustryLine Facts Nominal length: 300 mm Cross-section: 35 x 9 mm Weight: 1.1 kg Special features Standard: DIN EN ISO 3650 Grade: 0 Material: hardened special steel FAQ What does Grade 0 mean for this end gauge? Grade 0 denotes a high level of geometric accuracy according to the DIN EN ISO 3650 standard and is intended for precise comparative measurements and calibration tasks. Is this gauge suitable for routine workshop checks? Yes, the hardened special steel and compact format make the 300 mm end gauge appropriate for workshop inspection, comparator use and machine setup where a stable reference is required. Which technical identifiers are relevant for ordering? The product is listed as SKU M320.300.0 with GTIN 4054469132464 and is supplied under the Metav IndustryLine brand. How should the gauge be stored to preserve accuracy? Store in a dry, clean environment, protected from impact and corrosion; avoid prolonged exposure to humid conditions and keep contact faces free from oils or dust. Can this gauge be used with comparator and calibration benches? The dimensional stability and Grade 0 conformity make the gauge suitable as a bench reference for comparators and for transfer standards in calibration workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300-400mm End Gauge Holder Very Sturdy Construction, Expandable - Metav IndustryLine
Take advantage of the very stable construction and the adjustable 300–400 mm clamping range to secure calibrated end gauges for reproducible measurements and instrument verification. Order the holder through Metav Werkzeuge or request advice from our consultants for application-specific guidance. End gauge holder M317.116 — robust 400 mm holder with 300–400 mm clamping range (extendable) The End gauge holder M317.116 is a purpose-built device for securing end gauges during precision measurement and calibration tasks in workshop and laboratory metrology environments. Very robust design for stable clamping Adjustable clamping range 300–400 mm Cross-section 30.5 x 2.5 mm for rigidity Compact weight 0.8 kg for easy handling Consistent clamping for repeatable calibration results A stable fixture minimises variables that affect measurement uncertainty. The holder’s robust design and its cross-section 30.5 x 2.5 mm provide the lateral stiffness needed to keep end measures aligned during inspection or comparison procedures. With a defined clamping range 300–400 mm, the device supports medium‑range gauge stacks and reduces the risk of movement that would otherwise compromise repeatability. This mechanical stability translates directly into fewer re-measurements and more efficient quality routines. Suited to medium‑range metrology and gauge applications Classified in the medium measuring range, this holder fills the gap between compact bench fixtures and long‑span assemblies; it is therefore suitable for calibration of larger gauge stacks, fixture plates and mid‑sized components. The construction is optimised for use with calibrated end gauges and length standards, enabling traceable checks and instrument verification. The extendable clamping capability supports varied end‑measure combinations without resorting to multiple specialised fixtures, simplifying inventory and setup. Practical handling and workshop integration At 0.8 kg the unit remains manageable for routine handling while offering a secure hold during measurement operations. The straightforward mechanical clamping principle requires no electronic interface and integrates with existing inspection benches and gauge block setups. The compact mass and slim profile make it simple to position within a measurement stack or alongside gauge plates, speeding up changeovers and supporting a smooth workflow in the quality area. For reliable calibration fixtures, choose the Metav IndustryLine holder and contact Metav Werkzeuge for application advice or ordering information at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M317.116 GTIN: 4054469127453 ECLASS: 21170108 Tariff number: 90173000 Facts Weight: 0.8 kg Clamping range: 300–400 mm (extendable) Cross-section: 30.5 x 2.5 mm Special features Very stable construction Designed for use with end gauges and calibration tasks Suitable for medium measuring range applications FAQ What is the primary application of this end gauge holder? The holder is intended for securing end gauges during precision measurement and the calibration of measuring instruments; the End gauge holder M317.116 supports repeatable setups in workshop and laboratory environments. Is the clamping range adjustable beyond 300–400 mm? The device is specified with a 300–400 mm clamping range and is described as extendable for varied gauge combinations; specific extension options can be confirmed with Metav Werkzeuge. How does the holder improve measurement reproducibility? By providing a very stable design and a rigid cross‑section 30.5 x 2.5 mm, the holder reduces movement and alignment errors, which lowers measurement uncertainty during calibration and inspection routines. Can the holder be used with standard gauge blocks and end measures? Yes, the holder is designed for use with end gauges and gauge stacks commonly used in metrological checks and instrument verification processes. What is the product SKU for ordering and reference? Reference the article number M317.116 when enquiring or ordering via Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm End Gauge Holder Very Sturdy Design - Metav IndustryLine
Benefit from a robust, heavy‑duty holder with a 0–300 mm clamping range and a compact 30×5 mm profile that keeps end measures stable during calibration and routine checks. Order the end gauge holder directly via Metav Werkzeuge or ask our consultants if needed. End gauge holder M317.206 — heavy‑duty holder for end measures, clamping range 0–300 mm The End gauge holder M317.206 serves as a secure fixture for end measures during precision measurement and instrument calibration, designed for standard workshop and laboratory use. Robust, heavy-duty construction Clamping range 0–300 mm Compatible with end measures for calibration Compact 30×5 mm profile up to 300 mm Stable, repeatable mounting for precision workflows The holder is engineered to provide a stable support for end measures, reducing setup time and variability during repeated calibrations. Its heavy‑duty construction minimises flex and vibration, so comparative and reference measurements remain consistent. Classified for the standard measuring range (up to 300 mm), the fixture balances reach and stiffness, making it suitable for everyday workshop tasks in machine and metalworking environments where repeatability and process reliability are priorities. The compact profile contributes to a low moment of inertia, which supports more reproducible contact conditions when aligning gauges. Designed for calibration efficiency and routine metrology A straightforward clamping mechanism with a full 0–300 mm span accommodates common end measures without the need for multiple adapters, simplifying calibration procedures and saving handling time. The cross‑section specification — 30×5 mm for lengths up to 300 mm — provides a slim, yet stiff, support beam that is easy to position and secure on workbenches or within test rigs. At approximately 0.4 kg, the holder is portable for bench use yet heavy enough to remain steady during fine adjustments. These properties support a smoother inspection cycle and lower error rates in dimensional verification tasks. Practical integration and workshop relevance Supplied as a purpose‑built fixture, the holder integrates into established measuring routines and jigs, offering a pragmatic tool for quality control, toolroom tasks and calibration benches. The combination of robustness and compact design reduces the need for frequent repositioning and minimises operator influence on the measurement. For production lines and service shops seeking dependable reference fixturing, this holder supports repeatable outcomes and efficient throughput. Metav’s inventory and logistics ensure reliable availability and consistent quality for workshop supplies across Europe. Contact Metav Werkzeuge for expert advice and prompt supply of the Metav IndustryLine M317.206 end gauge holder with 0–300 mm clamping range Technical data SKU: M317.206 GTIN: 4054469127521 Tariff number: 90173000 Core specifications Measuring range: 0–300 mm Clamping range: 0–300 mm Cross-section: up to 300 mm – 30×5 mm Weight: 0.4 kg Special features Very stable construction Designed for use with end measures and calibration Category: End measures (measuring instruments) Brand: Metav IndustryLine FAQ How does the holder secure end measures during calibration? The holder uses a clamping system covering a 0–300 mm span to fix end measures securely; the robust construction minimises movement for stable calibration results with the M317.206. Is the fixture suitable for routine workshop checks? Yes, the compact profile and sturdy design make the holder well suited to everyday dimensional checks and calibration tasks in machine shops and quality departments. What physical dimensions define the beam profile? Up to 300 mm the cross‑section is 30×5 mm, providing a slim yet stiff support that helps maintain alignment during measurement. Can the holder be used with different end measure lengths? The clamping range of 0–300 mm accommodates common end measures without modifications, streamlining calibration workflows. Which category of measuring equipment does this holder belong to? The product is intended for end measures within the measuring instruments category and is optimised for standard‑range applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Gauge Block Set Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a DIN EN ISO 3650 Grade 1 length standard that combines hardened special steel construction with a compact 35×9 mm cross‑section for dependable shop-floor reference measurements; order directly from Metav Werkzeuge or ask the team for application advice. End gauge 300 mm — DIN EN ISO 3650, Grade 1 (Metav IndustryLine) A End gauge 300 mm for use as a workshop reference standard and dimensional master in machine shops and quality control applications DIN EN ISO 3650, Grade 1 certified Hardened special steel construction 300 mm nominal length, cross-section 35×9 mm Robust, workshop-ready master gauge Consistent dimensional reference for machining and inspection The DIN EN ISO 3650 specification ensures that this length master meets a recognised tolerance class, making it a reliable baseline in routine inspection and setup tasks. As a Grade 1 end gauge it provides a high level of dimensional fidelity appropriate for component verification and comparator use. The nominal length of 300 mm positions the gauge in the Standard range (100–300 mm), which offers an effective compromise between reach and stiffness — ideal for general machine‑tooling, jigs and fixtures where reproducible comparative measurements are required. The normative designation supports traceable processes and simplifies the integration of the gauge into quality-management workflows. Durable design to withstand daily workshop use Manufactured from hardened special steel, the bar is engineered for dimensional stability and wear resistance under frequent handling. The slim cross‑section 35×9 mm reduces thermal mass for quicker ambient equilibration while maintaining sufficient profile stiffness for repeatable measurements; the unit's weight 1.1 kg reflects this balance of rigidity and usability. Surface hardness and the selected material minimise abrasion and preserve gauge faces, lowering the need for premature rework or replacement. For production environments that demand dependable reference tools, the mechanical robustness translates directly into lower downtime and sustained measurement confidence. Practical traceability and integration into inspection routines Supplied with clear identifiers, including GTIN 4054469132471 and article indexing, the gauge is straightforward to record in asset logs and instrument registers. The rigid format and standardised geometry make the piece suitable as a workshop master for setting up callipers, micrometres or as a comparison artefact in dimensional audits. While the item adheres to the DIN EN ISO 3650 standard, it is intended for straightforward incorporation into existing calibration schedules and quality checks rather than as a primary calibration artefact for laboratories requiring specific accreditation. The compact form factor and recognised standard reduce ambiguity during audits and streamline everyday measurement tasks. For reliable workshop standards from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to discuss suitability for specific workflows and secure prompt delivery from the European quality hub. Technical data Article number: M320.300.1 GTIN: 4054469132471 Manufacturer: Metav IndustryLine Category: End gauges Facts Nominal length: 300 mm Cross-section: 35×9 mm Weight: 1.1 kg Grade: 1 Customs tariff: 90173000 Materials & features Hardened special steel Standard: DIN EN ISO 3650 Robust workshop design Compact profile for improved stiffness FAQ What applications is this end gauge intended for? This end gauge 300 mm from Metav IndustryLine is designed as a workshop reference for machine shops, fixture set-up and routine dimensional checks where a stable length master is required. Does Grade 1 imply laboratory-level tolerance? Grade 1 under DIN EN ISO 3650 indicates a high-accuracy workshop standard suitable for quality control and comparator use; it serves as a dependable reference within production and inspection environments. What material and durability characteristics does the gauge offer? The gauge is made from hardened special steel, chosen to resist wear and preserve measuring faces during regular handling and comparative checks. How should the gauge be recorded and integrated into quality systems? Use the GTIN and article number when logging the item into instrument registers; the standardised geometry simplifies integration into existing calibration and QA schedules. Is the 300 mm length suitable for general workshop demands? Yes — classified in the Standard range, the 300 mm length offers a practical balance of reach and stiffness for everyday machining and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the ceramic construction, Grade 1 precision and compact 30 mm nominal length for dependable reference measurements in workshop and laboratory settings; order directly via Metav Werkzeuge or ask the consultants for tailored advice. Ceramic gauge block 30 mm — Grade 1 precision, DIN 861/1, Metav IndustryLine The Ceramic gauge block 30 mm is a compact reference length designed for high-precision dimensional checks and calibration tasks in inspection benches and toolrooms. Grade 1 accuracy to DIN 861/1 Thermally stable ceramic material Precision-ground 30 mm nominal length Reliable reference for routine calibration Manufactured to DIN 861/1 and rated Grade 1, this compact reference delivers dependable dimensional stability for everyday calibration tasks. As a gauge block, it serves as a known length standard for setting up comparators, verifying calipers and confirming reference stacks. The combination of a precisely ground surface and defined tolerance class reduces uncertainty in traceable checks, supporting routine quality control procedures in production and inspection environments. Material benefits that support consistent measurements The use of ceramic provides a stable, wear-resistant surface well suited to repeated contact with other standards and measuring tools. This material choice minimises the risk of corrosion and contributes to a long service life for the length standard. The 30 mm nominal size is compact and easy to handle on the bench, allowing quick integration into existing master sets or standalone use where a short, precise reference is required. Practical applications and workshop integration The compact format is ideal for inspection benches, maintenance departments and toolmaking shops that require a small, high-quality reference length. Its nominal length and finish make it suitable for setting up instruments, validating routine measurements and forming part of a gauge block set. The modest mass of the block eases handling and storage without compromising on the tactile feel required for precise seating and stacking operations. Designed for traceable quality in industry Compliance with DIN 861/1 signals that this length standard fits established German and international metrology practices, enabling straightforward documentation within quality systems. The precision-ground faces permit reliable stacking and comparative measurement, while the simple geometry supports repeatable contact conditions during measurement. For buyers requiring a compact, grade-defined reference, this solution balances usability and conformity to recognised norms. For dependable, compact length standards choose the Metav IndustryLine ceramic gauge block — contact Metav Werkzeuge for purchasing guidance and technical advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: M324.030 GTIN: 4054469143392 Tariff code: 90173000 Facts Nominal length: 30 mm Weight: 0.057 kg Special features Material: ceramic Tolerance class: Grade 1 (DIN 861/1) Category: Endmasse FAQ What tolerance class does this gauge block meet? The gauge block meets Grade 1 tolerance according to DIN 861/1, providing a recognised precision level for workshop and inspection use. Which material is used and what are the handling benefits? The reference is made from ceramic, offering a stable, wear-resistant surface that is easy to handle and suitable for repeated comparison measurements. Is the 30 mm size suitable for stack-based measurements? Yes, the 30 mm nominal length is a compact reference that integrates neatly into gauge block stacks and supports quick setup for comparative checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32 Piece Gauge Block Set 1–50 mm Hardened Special Steel DIN EN ISO 3650 Plastic Case - Metav IndustryLine
Take advantage of a compact, DIN EN ISO 3650-compliant toolset that combines wear-resistant hardened special steel and a complete assortment of sizes for reliable setup and inspection tasks; order the set directly via Metav Werkzeuge or contact our consultants for application advice. Parallel end gauge set 32/1 — hardened special steel, DIN EN ISO 3650 (Metav IndustryLine) The Parallel end gauge set 32/1 is a precision set of parallels designed for setting, supporting and inspecting components in workshop, assembly and quality‑control environments according to DIN EN ISO 3650 DIN EN ISO 3650 compliance Hardened special steel construction Complete 32-piece assortment for setups Total weight approx. 1.3 kg for easy handling Reliable precision for workshop and inspection The set delivers consistent measurement and fixturing support, translating standardised geometry into dependable results on the shop floor. Constructed to meet DIN EN ISO 3650, the collection of parallels provides repeatable contact surfaces that reduce setup variation and improve batch-to-batch consistency. Using standardised parallels simplifies aligning workpieces, enabling faster machine changeovers and fewer rejects — a clear efficiency gain in production and inspection processes. Robust construction reduces wear and downtime Made from hardened special steel, the parallels resist deformation and surface wear that can compromise accuracy over time. The material choice and heat treatment produce a stable contact surface that maintains dimensional integrity under regular use. This durability lowers the frequency of replacement and maintenance, supporting continuous operation and predictable maintenance intervals — an economic advantage for any workshop aiming to keep throughput high. Versatile assortment for set-up and calibration tasks A complete 32-piece assortment covers a broad range of stacking and spacer configurations, making the set suitable for workholding, gauging and precision staging. The varied sizes support small components through to larger fixtures, enabling internal and external support as required in milling, drilling and inspection processes. By offering a ready range of parallels in one set, downtime for searching or improvising is minimised and process reproducibility is improved. Practical handling and workshop integration With an overall weight of about 1.3 kg, the set is straightforward to handle and transport between workstations, yet substantial enough to remain stable during use. The compact package facilitates storage in tool cabinets or inspection benches without occupying excessive space. For procurement and logistics, the set is listed with GTIN and tariff classification to support inventory control and customs documentation, streamlining acquisition and part tracking. Contact Metav Werkzeuge today for tailored advice on the M318.321 parallel end gauge set and fast, reliable delivery from our Emmerich facility Technical data Article number: M318.321 GTIN: 4054469128825 Weight: 1.3 kg Pieces per set: 32 Tariff number: 90173000 Facts Material: special steel, hardened Standard: DIN EN ISO 3650 Category: Endmasse SKU: M318.321 Special features Complete set for setup and support Durable contact surfaces for repeatability Compact mass for easy handling Suitable for workshop and inspection applications FAQ What standards does this set comply with? The set complies with DIN EN ISO 3650, ensuring standardised geometry and interchangeability of the parallels. Is the material suitable for heavy-duty use? Yes, the parallels are made from hardened special steel, chosen for wear resistance and long service life in typical workshop environments. How many pieces are included in the set? The set comprises 32 pieces and is supplied as a complete assortment for flexible stacking and fixturing. Can the set be used for both setup and inspection tasks? Yes, the design and material make the set suitable for precise setup, supporting fixtures and general inspection work in production and quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32 Piece Gauge Block Set 1–50 mm, Hardened Special Steel, DIN EN ISO 3650, Supplied In Case - Metav IndustryLine
Combine the proven stability of hardened special steel, the conformity to DIN EN ISO 3650, and secure transport in a protective case for dependable reference measurements; order the Metav IndustryLine parallel gauge block set directly via Metav Werkzeuge or consult our advisors for specification support. Metav IndustryLine Parallel gauge block set M318.322 — 32-piece, DIN EN ISO 3650 The Parallel gauge block set M318.322 is a precision reference kit for dimensional metrology, suited to workshop measurement, quality control and calibration preparation. Hardened special-steel construction Conforms to DIN EN ISO 3650 Supplied in protective case Precision-ground reference surfaces Reliable reference for repeatable measurements The set provides precision reference elements manufactured from hardened special steel, offering stable dimensions and low wear over repeated use. Built to the DIN EN ISO 3650 standard, the components act as trustworthy length standards in inspection routines and comparators. Because the blocks are precision-ground, they enable consistent stack-ups and stepwise build-ups that reduce cumulative error in setting gauges and fixtures, supporting efficient process control in production and workshop environments. Durability that keeps calibration intervals realistic Hardening and finishing of the material ensure resistance to abrasion and surface deformation, so the reference faces remain true under normal workshop handling. The precision-ground reference surfaces minimise flatness deviations and ensure predictable contact conditions during comparison measurements. Supplied as a complete set, the collection is suitable as a stable master for routine checks, assisting in maintaining measurement traceability and predictable drift characteristics that lower the frequency of corrective maintenance. Practical handling and safe transport for busy shops Delivered in a protective case designed for safe transport, the set arrives ready for storage and mobile use between bench, machine and calibration station. The compact total mass and ergonomic layout simplify handling while protecting surfaces from damage. As a workshop-grade reference kit from Metav IndustryLine, the set supports faster setup of inspection rigs and a clearer assessment of process capability, helping engineers and technicians make measurement decisions with confidence. For ordering, specification help or to discuss suitability for a specific measurement task, request the Metav IndustryLine parallel gauge block set (M318.322) via Metav Werkzeuge—phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for personalised advice. Technical data Article number: M318.322 GTIN: 4054469128832 Customs tariff number: 90173000 Weight: 1.3 kg Facts Pieces per set: 32 Quality class: 2 Standard: DIN EN ISO 3650 Special features Material: hardened special steel Precision-ground reference surfaces Supplied in protective case for transport Set configuration: assorted block lengths for stepwise build-up FAQ What tolerance class does this gauge block set meet? The Metav IndustryLine parallel gauge block set M318.322 is provided as quality class 2 and manufactured to the requirements of DIN EN ISO 3650, offering a balance between workshop usability and traceable reference performance. Are the block faces finished for immediate stacking and comparison? Yes, the components feature precision-ground reference surfaces that allow reliable stacking and comparison measurements without additional preparation. Is this set suitable for routine use in a production inspection environment? The M318.322 set is intended for workshop and inspection use; its hardened steel construction and protective case make it appropriate for recurring reference checks and fixture set-up tasks in production environments. How should the set be stored to preserve accuracy? Store the blocks clean, lightly oiled and in their protective case to avoid nicks and corrosion; the case supplied with the set is intended for transport protection and short-term storage between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32 Pieces Ceramic Gauge Block Set 1–50 mm, Grade 0, Antimagnetic, No Lubrication Required, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of the combination of ceramic construction, Grade 0 accuracy and a protective transport case for dependable reference measurements in workshop and inspection environments — order directly via Metav Werkzeuge or contact our consultants for tailored advice. Ceramic parallel end gauge set, Grade 0 — End gauges by Metav IndustryLine, DIN EN ISO 3650, ceramic precision Ceramic parallel end gauge set, Grade 0 provides a compact, corrosion-resistant reference for alignment, setup and inspection tasks across machine shops and metrology benches Ceramic material, corrosion-resistant Grade 0 accuracy to DIN EN ISO 3650 Antimagnetic, maintenance-free handling Delivered in protective transport case High-precision reference that supports reproducible measurement results The set is manufactured to Grade 0 tolerances in accordance with DIN EN ISO 3650, offering a stable reference for alignment and inspection tasks where reproducibility matters. By combining defined geometry with a dimensionally stable ceramic body, the parallels deliver a reliable datum surface for clamping, squaring and calibration preparations. This consistency reduces iterative adjustments during setup and supports efficient quality checks on components and assemblies. Long-term stability and low maintenance for busy workshops Made from ceramic, the parallels resist corrosion and abrasion, which translates into extended service life and reduced rework of datum surfaces. The material’s inherent properties mean the set is non-magnetic, eliminating interference in magnetic-sensitive operations, and the specified handling characteristics remove the need for pre-degreasing or post-oiling before routine use. The overall lightweight construction also eases handling while preserving wear resistance and dimensional stability under normal workshop conditions. Practical integration, transport and compatibility with inspection routines A protective transport case keeps the parallels organised and protected during storage and on the move, supporting fast retrieval and safe handling at the bench or on site. Cross-section profiles conform to workshop conventions for parallel end gauges, enabling secure fixturing and straightforward stacking for compound heights. The set is compatible with standard inspection and setup procedures, making it a practical choice where a corrosion-resistant, maintenance-friendly datum set is required. For Metav IndustryLine ceramic parallels, contact Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com, +49 2822 7131930) for purchasing advice and dependable supply from our European distribution centre Technical Data Article number: M321.320 GTIN: 4054469132631 Material: Ceramic Standard: DIN EN ISO 3650 Weight: 1.2 kg Cross-section: up to 30 mm → 30 x 9 mm; from 40 mm → 35 x 9 mm Tariff number: 90173000 Grade: 0 Set: yes Pieces per set: 32 Facts Mass: 1.2 kg Cross-section dimensions: 30 x 9 mm and 35 x 9 mm Standards: DIN EN ISO 3650 Tariff: 90173000 Set composition: multiple parallel end gauges Special features Antimagnetic No pre-degreasing or post-oiling required for standard use Ceramic construction for corrosion resistance and wear resistance Delivered in protective transport case FAQ What accuracy class do these parallels conform to? The parallels conform to Grade 0 accuracy as defined by DIN EN ISO 3650, providing a high-precision reference for alignment and inspection. Are the parallels suitable for magnetic-sensitive applications? Yes, the ceramic construction is non-magnetic, making the set suitable for environments where magnetic interference must be avoided. Is a calibration certificate included with the set? The set is produced to DIN EN ISO 3650; any calibration or certificate beyond production specification should be clarified with Metav Werkzeuge at the point of purchase. How does ceramic compare with steel for reference parallels? Ceramic offers superior corrosion resistance and excellent wear characteristics for prolonged datum stability, with lower maintenance compared with standard steel parallels. Can the parallels be used for both setup and inspection tasks? Yes, the geometry and stability of these parallels make them suitable for routine setup, squaring, and comparative inspection tasks in workshops and labs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32-Piece Carbide Parallel Gauge Set DIN EN ISO 3650 Hardened Steel Blocks In Wooden Case - Metav IndustryLine
Take advantage of a carbide construction and DIN EN ISO 3650 compliance to ensure durable, repeatable set-up and inspection results; combine these strengths with a compact total weight for straightforward handling and streamlined workshop workflows. Order the set directly via Metav Werkzeuge or request further specification advice from our consultants. Carbide parallel end gauge set M322.321 — 32-piece, DIN EN ISO 3650 The Carbide parallel end gauge set M322.321 is a precision set of parallels intended for inspection, fixture set-up and comparative measurements in metalworking and toolroom environments. Carbide construction for long-lasting wear resistance DIN EN ISO 3650 compliant precision Lightweight set totalling 1.3 kg for easy handling Comprehensive range of parallels for workshop use Durable carbide for reliable repeatability The parallels are manufactured from carbide, giving them high wear resistance and dimensional stability under repeated contact and clamping. Such material choice reduces frequent replacement and keeps production interruptions to a minimum, which improves overall process efficiency. Using hard, wear-resistant parallels is particularly advantageous where regular comparative checks are performed, since the contact surfaces retain the geometry required for consistent results over time. Standards and practical benefits for inspection work Compliance with DIN EN ISO 3650 ensures that the set meets recognised metrological dimensions and tolerances for parallels, providing a verifiable basis for quality assurance and fixture calibration. The set’s specification supports routine quality control and makes integration into existing inspection protocols straightforward. The compact overall mass of 1.3 kg aids ergonomic handling during set-up and transfer between benches, helping to maintain workflow speed without compromising on accuracy. Practical range and workshop functionality Supplied as a complete set, the collection of parallels covers a broad range of practical sizes for everyday tasks in machining and assembly. The modular nature of the set enables versatile stacking and pairing to create support blocks, datum planes or height references for measuring and clamping. The combination of material durability and standard-compliant manufacture reduces uncertainty in repetitive measurements and supports leaner maintenance cycles for tooling and gauges. For tailored specification advice and to secure the carbide parallels from Metav IndustryLine, contact Metav Werkzeuge in Emmerich via +49 2822 7131930 or info@metav-werkzeuge.com — Metav’s specialists provide precise product guidance for workshop and inspection needs Technical data Article number: M322.321 GTIN: 4054469132709 Weight: 1.3 kg Pieces per set: 32 Tariff number: 90173000 eClass: 21179208 Facts Material: Carbide Standard: DIN EN ISO 3650 Set: complete parallels collection Mass: 1.3 kg Special features Wear-resistant carbide construction Suitable for inspection and fixture set-up Compact handling weight for workshop use Delivered as a complete set FAQ What material are the parallels made from? The parallels are manufactured from carbide, providing high wear resistance and stability for repeated use in inspection and set-up tasks. How many parallels are included in the set? The set contains 32 parallels and is listed under SKU M322.321. Which standard does the set conform to? The parallels conform to DIN EN ISO 3650, as stated in the product specification. Is the set suitable for workshop inspection and fixture set-up? Yes. The carbide construction and standard-compliant manufacture make the set appropriate for inspection tasks, comparative measurements and fixture preparation in machine shops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Ceramic Gauge Block Set 32-Piece Grade 1, DIN EN ISO 3650, Antimagnetic, Supplied in Case - Metav IndustryLine
Combine Grade 1 accuracy with the dimensional stability of ceramic and antimagnetic behaviour to secure dependable reference lengths for shop and lab; order this solution directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic parallel end gauge set M321.321 — Grade 1, DIN EN ISO 3650, 32-piece (Metav IndustryLine) The Ceramic parallel end gauge set offers a compact, thermally stable reference for routine calibration and quality checks across workshop and inspection environments. Grade 1 accuracy to DIN EN ISO 3650 Wear‑resistant ceramic construction Antimagnetic with low thermal expansion Comprehensive 32-piece reference set Precision that secures quality on the production line Measured parts require repeatable reference standards; this Grade 1 ceramic set provides precisely that. The tolerances defined by DIN EN ISO 3650 mean the set functions as a reliable reference standard for dimensional verification, reducing uncertainty in go/no‑go checks and comparative measurements. By using blocks with inherently low thermal sensitivity, measurement drift from ambient changes is minimised, so inspection intervals can be planned with greater confidence and fewer rechecks. Material and handling that reduce maintenance overhead Made from engineered ceramic, the blocks combine surface hardness with corrosion resistance to deliver long service life with minimal maintenance. The material is antimagnetic, eliminating magnetic attraction that can disturb alignment when comparing to soft jaws or magnetic fixtures. Because the finish and composition prevent rapid wear and do not require post‑use greasing, routine handling becomes cleaner and less time consuming — a tangible saving for busy inspection bays. Standards and traceability for robust documentation Conformity to DIN EN ISO 3650 ensures the set aligns with recognised metrology practice and supports internal quality systems. Each value can be used as a documented reference in inspection reports, making quality audits and process validation more straightforward. The compact design and consistent geometry of the blocks make them suitable for calibration benches and comparative setups in small laboratories as well as production floor control stations. Practical use: integrating a stable reference into daily checks The block set is conceived for quick assembly into composite standards or for individual reference use. The combination of wear‑resistant surfaces and a well‑defined cross‑section gives stable seating on gauge faces, reducing rocking or misalignment during comparison. The set’s composition makes it particularly useful where thermal effects or magnetic interference would otherwise compromise steel standards, allowing the set to complement existing steel gauge blocks rather than replace essential tooling entirely. For tailored advice on integrating this Metav IndustryLine ceramic set into inspection routines, contact Metav Werkzeuge in Emmerich for product availability and application support. Technical data SKU: M321.321 GTIN: 4054469132648 Article name: Ceramic parallel end gauge set, Grade 1 Standard: DIN EN ISO 3650 Facts Weight: 1.2 kg Pieces per set: 32 Tariff number: 90173000 Cross section: up to 30 mm 30x9 mm, from 40 mm 35x9 mm Lengths: 1x1,005 / 9x1,01–1,09 / 9x1,1–1,9 / 9x1–9 / 4x10–30, 50 Special features Material: Ceramic Grade: 1 Antimagnetic Wear‑resistant finish Set design for reference measurements FAQ What tolerance class does this ceramic set meet? The set meets Grade 1 tolerances as defined by DIN EN ISO 3650, making it suitable as a high‑precision reference in many inspection tasks. Is the material suitable where magnetic interference is a concern? Yes, the blocks are antimagnetic, so the ceramic composition of the set avoids magnetic attraction that can affect delicate comparative measurements. How does ceramic compare with steel for gauge blocks? Ceramic offers lower thermal expansion and superior corrosion resistance; the set is therefore a stable reference where temperature fluctuations or oxidising environments compromise steel standards. What does the set include and how is it identified? The delivery comprises a 32‑piece parallel end gauge set identified as SKU M321.321 and GTIN 4054469132648, covering a range of standard reference lengths. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Parallel Gauge Block Set 32‑Piece, Hardened Special Steel, DIN EN ISO 3650, Supplied in Case - Metav IndustryLine
Take advantage of a 32-piece composition paired with hardened special steel and conformity to DIN EN ISO 3650 for consistent, workshop-ready reference measurements; this combination supports reliable in-process checks and repeatable setups. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. Parallel end gauge set M318.320 — 32-piece precision parallel gauges (DIN EN ISO 3650) by Metav IndustryLine The Parallel end gauge set M318.320 is a compact, factory-proven collection of precision parallels intended for reference measurements, setting-up and inspection tasks within metalworking and measurement labs. Complete 32-piece precision set Hardened special steel construction DIN EN ISO 3650 conformity Total weight 1.8 kg Precision engineered for traceable reference measurements The set is designed as a reliable reference standard to support routine dimensional checks and fixture set-up. Conformity with DIN EN ISO 3650 means tolerances and flatness are specified to an industry-recognised benchmark, reducing uncertainty in go/no-go assessments and calibration chains. Where process stability and reproducibility matter, these parallels provide a measurable basis for alignment and inspection, making them suitable for quality-control benches and assembly jigs that require repeatable spacing and parallelism. Durable construction that keeps production running Manufactured from special steel, hardened for wear resistance, the parallels are intended for repetitive handling in industrial environments. The 32-piece composition offers a broad selection of thicknesses for shimming, stacking and supporting components during machining or inspection. With a compact overall mass of 1.8 kg, the set is straightforward to store and transport within the workshop while remaining robust enough to withstand routine use. The material choice and heat treatment combine to limit surface degradation and maintain dimensional stability over time. Practical benefits for workshop efficiency and quality assurance Using reference parallels streamlines setup times and reduces iterative adjustments during machining and measurement. The set acts as a time-saving tool in fixture preparation and height-setting tasks, supporting faster first-off verification and lower scrap rates. The modular nature of the kit simplifies selection for specific tasks and helps maintain a clear audit trail when combined with standard operating procedures. Backed by Metav’s distribution and quality filter for the European market, the set aligns with a pragmatic purchasing approach for industry and trade customers who prioritise dependable measurement tools. For a dependable, workshop-ready reference set from Metav IndustryLine, contact Metav Werkzeuge to discuss delivery options and application guidance — Metav Werkzeuge can advise on selecting the right parallels for specific processes. Technical data SKU: M318.320 Label: Parallelendmaßsatz 32/0 32-tlg., DIN 861/0 GTIN: 4054469128818 Weight: 1.8 kg Pieces per set: 32 Data Pieces: 32 Weight: 1.8 kg Tariff number: 90173000 GTIN: 4054469128818 Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Set type: Parallel end gauge set ECLASS: 21179208 FAQ What is the primary use of these parallels? The parallels are intended as reference elements for spacing, shimming and alignment tasks; the Parallel end gauge set M318.320 is suited to workshop and inspection applications where controlled parallelism is required. Which standard does the set comply with? This set conforms to DIN EN ISO 3650, which defines dimensional and form tolerances for parallel end gauges and helps ensure interchangeability and traceability. What material are the gauges made from and why does it matter? The gauges are made from special steel, hardened, which provides wear resistance and dimensional stability for frequent handling in industrial environments. How many pieces are included and how does that benefit workshop use? The kit contains 32 pieces, offering a broad selection of thicknesses for flexible stacking and shimming; this variety reduces the need for improvisation during setup and speeds up fixture preparation. Can these parallels be used for both inspection and fixture setup? Yes, the design and tolerances make the set suitable for quality checks as well as for setting up jigs and fixtures where reproducible spacing is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com