End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
175 mm Gauge Block Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of Grade 0 accuracy, hardened special steel construction and a compact 35 x 9 mm cross-section for a stable workshop reference standard; combine these attributes for repeatable measurements and low wear in daily use. Order the slip gauge directly via Metav Werkzeuge or contact our consultants for application advice. Slip gauge M320.175.0 – 175 mm end gauge, Grade 0 (Metav IndustryLine) A Slip gauge M320.175.0 serving as a 175 mm end standard for calibration benches and precision workshops, produced to DIN EN ISO 3650 Grade 0 tolerances Precision reference to DIN EN ISO 3650 Grade 0 Hardened special steel for long service life Compact cross-section 35 x 9 mm for stability Robust workshop reference with low mass Reference-grade accuracy for traceable measurements The unit is a slip gauge manufactured to DIN EN ISO 3650, specified as Grade 0, which positions it as a reference for fine inspection and calibration tasks. The standardized tolerance class ensures compatibility with established calibration processes and measurement chains, making the component suitable where repeatability and traceability are required. As a length reference, it supports reliable comparative checks and can be used to set up or verify callipers, micrometers and other workshop instruments. Durable construction that reduces uncertainty Built from special steel that is hardened, the standard combines surface durability with thermal stability for everyday workshop use. The slim 35 x 9 mm cross-section provides a balance between rigidity and ease of handling, while the modest mass of 0.8 kg reduces momentum during placement and helps avoid accidental damage. These material and geometric choices translate into lower wear rates and consistent contact behaviour, which directly reduces measurement uncertainty during frequent use. Optimised for the standard workshop range With a nominal length of 175 mm, the gauge falls into the standard measurement class (suitable for the common workshop sizes between 100 and 300 mm), offering the optimum compromise of reach and stiffness for machine‑building and tooling tasks. The article is catalogued as M320.175.0, enabling straightforward identification when integrating the block into existing sets or when ordering spare references. Its form factor supports handheld alignment and placement on datum surfaces for comparative measurement and setup operations. Practical handling, storage and partner support The slip gauge is intended as a working standard; careful handling and clean storage extend lifetime and protect surface integrity. For transport and integration into quality processes, the robust construction simplifies routine use without frequent replacement. For further technical details, calibration options or set composition, Metav Werkzeuge provides application support and product advice to ensure the chosen reference fits the intended inspection or calibration workflow. Metav’s position as a precision partner delivers pragmatic supply reliability from Emmerich to the workshop bench. Contact Metav Werkzeuge today for tailored advice on integrating the M320.175.0 slip gauge into calibration routines or for assistance selecting complementary reference blocks and storage solutions Technical Data Article number: M320.175.0 GTIN: 4054469132402 Nominal length: 175 mm Weight: 0.8 kg Cross-section: 35 x 9 mm Tariff code: 90173000 Facts Material: special steel, hardened Standard: DIN EN ISO 3650, Grade 0 Category: End gauges / Slip gauges Manufacturer: Metav IndustryLine Special features Compact geometry for workshop use Designed as a reference standard Low-wear hardened surface Suitable for comparative checks and instrument setup FAQ What accuracy class does this slip gauge follow? The slip gauge conforms to DIN EN ISO 3650 and is specified as Grade 0, making the M320.175.0 suitable as a workshop reference with traceable tolerances. Is the M320.175.0 suitable for everyday workshop calibration tasks? Yes, this 175 mm end gauge from Metav IndustryLine is designed for regular comparative measurements, instrument checks and set-up operations within the standard workshop range. What material is used and how does that affect service life? The block is made from hardened special steel, which provides abrasion resistance and stable contact behaviour, contributing to extended service life under normal workshop conditions. How should the slip gauge be stored to preserve accuracy? Store in a clean, dry environment on a stable surface and avoid shocks; for long-term protection, use a dedicated case or drawer designed for precision tools. Can this gauge be used to verify callipers and micrometers? Yes, as a calibrated reference to DIN EN ISO 3650 Grade 0, the M320.175.0 is suitable for comparative verification of callipers, micrometers and similar linear measuring devices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
175 mm Gauge Block, Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Benefit from Grade 1 accuracy, hardened special steel and a robust 35 x 9 mm cross-section for repeatable reference measurements; secure reliable dimensional control in the workshop by ordering directly through Metav Werkzeuge or contacting our advisors for application guidance. End gauge 175 mm — Grade 1, hardened special steel (Metav IndustryLine) The End gauge 175 mm is a precision reference standard for dimensional inspection and calibration tasks in metrology labs and production control, designed to deliver stable contact surfaces and reproducible results according to industrial inspection routines. Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel for wear resistance Cross-section 35 x 9 mm for high stability Precision ground contact faces for repeatability Trusted accuracy for routine inspection and control As a Grade 1 reference made to DIN EN ISO 3650, this precision block provides a verifiable baseline for comparative measurements and instrument checks. The fully precision ground faces ensure consistent contact geometry, reducing variability when used as a reference for micrometres, calipers or gauge sets. The use of hardened special steel increases wear resistance, so the block maintains its nominal dimensions under repeated use. This stability supports efficient quality control workflows and reduces the need for frequent replacement of reference standards. Rigidity and handling that support reproducible measurements The compact profile with a 35 x 9 mm cross-section combines stiffness and manageable mass to keep deflection low during handling and set-up. At approximately 0.8 kg, the unit is weighty enough to sit stably on a workbench yet light enough for straightforward manual positioning. The geometry is suitable for common shop‑floor and laboratory tasks where a solid, flat reference is required; the design minimises the influence of operator handling on measurement scatter, improving process reliability. Supply reliability and suitability for professional use Produced under the Metav IndustryLine, this reference block fits into established inspection routines and equipment sets. The combination of standard conformity and robust material selection makes it suitable for use as a workshop master gauge or a reference in incoming inspection. For bespoke traceability needs or integration into calibration schedules, Metav Werkzeuge provides practical advice and fast delivery from Emmerich, ensuring the reference standard reaches the workbench with minimal administrative effort and maximum clarity. Contact Metav Werkzeuge for application advice or to order this Grade 1 reference gauge directly from our Emmerich centre — phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com Technical data SKU: M320.175.1 GTIN: 4054469132419 Article designation: End gauge 175 mm, DIN EN ISO 3650, Grade 1 Facts Nominal size: 175 mm Cross-section: 35 x 9 mm Weight: 0.8 kg Tariff number: 90173000 ECLASS: 21170108 Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 1 Precision ground contact faces Category: End gauges (Endmasse) Manufacturer brand: Metav IndustryLine FAQ What level of accuracy does this reference provide? The End gauge 175 mm is manufactured to Grade 1 tolerances under DIN EN ISO 3650, offering a high-precision baseline suitable for routine inspection and comparative measurements. Can this gauge be used for calibration of micrometres and calipers? Yes, the hardened, precision ground faces of the gauge block make it suitable as a reference for setting and checking micrometres, calipers and other dimensional measuring instruments. What is the construction material and how does it affect longevity? Constructed from hardened special steel, the gauge is designed for improved wear resistance and dimensional stability during repeated contact and handling. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a ceramic reference standard that combines Grade 1 accuracy with exceptional thermal stability for reliable workshop comparisons; the 17 mm nominal length and low mass ensure easy handling and consistent repeatability. Order the ceramic gauge block directly via Metav Werkzeuge or ask our consultants if needed. Ceramic gauge block 17 mm – Grade 1 reference standard with DIN 861/1 Ceramic gauge block 17 mm delivers a compact, thermally stable reference for dimensional checks and comparator setups in production and quality inspections. High-stability ceramic material Grade 1 accuracy (DIN 861/1) Exact nominal length 17 mm Low weight 32 g Precision where repeatability counts The Grade 1 classification according to DIN 861/1 designates this block as a workshop-grade reference suitable for routine verification and set building. Its 17 mm nominal length provides a defined reference point for gauge sets and length standards, reducing cumulative error when used in combinations. By selecting a block with defined geometric quality, measurement chains become more reproducible and corrective actions can be taken sooner, improving process control and lowering scrap rates. Material benefits that reduce drift and wear Made from ceramic, this block offers low thermal expansion compared with many metals, which translates into greater stability under varying workshop temperatures. The surface hardness and wear resistance of the material maintain contact integrity over repeated use, while corrosion resistance ensures long service life with minimal maintenance. These material properties support consistent contact conditions during calibration and comparative measurements, so readings remain dependable between inspection intervals. Compact handling and practical workshop use At just 32 g, the compact form factor makes this reference standard easy to position in tight inspection rigs or alongside other standards in a set. The nominal size is convenient for rapid set assembly and storage without excessive bulk. The block’s clean, defined faces simplify setup on comparators, length gauges or simple jig checks, enabling faster inspection cycles and a smoother workflow at the production bench. Built for dependable quality systems This ceramic gauge block is designed to integrate into existing quality routines and calibration plans as a stable short-length reference. The combination of Grade 1 accuracy and the ceramic material supports consistent comparative measurements and traceable inspection practices. For operations seeking dependable reference pieces without specialist handling needs, the block is a pragmatic choice that reinforces measurement confidence on the shop floor. For a reliable addition to precision tooling, request supply and application advice from Metav Werkzeuge — Metav IndustryLine products are stocked and supported from Emmerich, and our consultants can advise on integration with existing gauge sets and inspection routines. Technical data Article number: M324.017 GTIN: 4054469143224 Customs tariff number: 90173000 Measurements Nominal length: 17 mm Weight: 0.032 kg Accuracy class: Grade 1 Features Material: Ceramic Standard: DIN 861/1 Category: End standard / Gauge block Brand: Metav IndustryLine FAQ What tolerance or accuracy does this block provide? The block is specified as Grade 1 (DIN 861/1), which defines its permissible geometrical deviations for use as a workshop reference. Is the block suitable for temperature‑sensitive comparisons? Yes — the ceramic material exhibits low thermal expansion and is therefore well suited to comparative measurements where ambient variation might otherwise introduce drift. Can this block be combined with other lengths to build sets? The 17 mm nominal length is intended for combination with other standards; it serves as a compact, stable element when constructing gauge stacks or reference sets. What handling or storage is recommended to preserve accuracy? Store the block in a clean, dry environment and avoid impacts to the measurement faces; the ceramic surface is wear‑resistant but benefits from cautious handling to keep faces pristine. Does the product include a traceability label or serial reference? Product labelling and identification follow standard manufacturer practice; for full traceability options and documentation, please consult Metav Werkzeuge when ordering. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18 mm Gauge Block Grade 1, DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Combine Grade 1 accuracy with a hardened special-steel construction and conformity to DIN EN ISO 3650 to ensure a stable length standard that supports repeatable measurements and traceability. Order directly via Metav Werkzeuge or consult the Metav team for application-specific advice. End gauge 18 mm (gauge block) – Grade 1, DIN EN ISO 3650 | Metav IndustryLine The End gauge 18 mm is a hardened gauge block designed as a compact length standard for precision inspection and calibration tasks in industrial metrology Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel construction Compact 18 mm nominal length Consistent accuracy for reliable quality control A measurement standard with Grade 1 specification and conformity to DIN EN ISO 3650 provides a documented tolerance class that supports process control and instrument verification. As a compact length standard, this gauge block offers a defined nominal dimension of 18 mm, making it immediately usable as a reference for setting instruments, verifying calipers or comparing against master standards. The clear normative basis simplifies documentation and helps maintain production stability by reducing measurement uncertainty at the control point. Robust design for repeated use in the workshop Manufactured from hardened special steel, the component resists wear and maintains its dimensional stability over many cycles of use. The specified cross-section (up to 10 mm: 30 x 9 mm; from 10.1 mm: 35 x 9 mm) balances handling comfort with sufficient mass to avoid user-induced deflection, so routine handling produces repeatable results. At approximately 0.035 kg the piece is compact yet substantial enough to withstand regular use on an inspection bench without compromising the calibration interval expected of a workshop standard. Practical compatibility and traceability in everyday metrology The block's simple geometry and standard conformity make it compatible with conventional comparison methods and with common workshop instruments. Labelling with the nominal value and the applicable standard assists in inventory and calibration records, supporting traceability chains. Where traceable standards are required for audits or quality management, the normative reference to DIN EN ISO 3650 clarifies acceptance criteria and streamlines integration into existing calibration routines. For standard-compliant measuring standards from Metav IndustryLine, contact Metav Werkzeuge for expert advice and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M319.180.1 GTIN: 4054469131894 Facts Nominal length: 18 mm Weight: 0.035 kg Cross-section: up to 10 mm: 30 x 9 mm; from 10.1 mm: 35 x 9 mm Special features Material: special steel, hardened Grade: 1 Standard: DIN EN ISO 3650 FAQ What tolerance class does this gauge block meet? The block is supplied as Grade 1 conformity to DIN EN ISO 3650, providing a clearly defined tolerance band for routine verification tasks. Is the 18 mm block suitable for tool setup and caliper checks? Yes, the End gauge 18 mm from Metav IndustryLine functions as a compact reference for setting calipers and performing quick comparative checks on workshop instruments. What material is used and why does it matter? The block is made from hardened special steel, chosen for wear resistance and dimensional stability so that the calibration interval is extended under normal handling. How should the gauge block be stored to preserve accuracy? Store the standard in a clean, dry environment at stable temperature; avoid contact with abrasive surfaces and handle with care to protect the measuring faces. Can this gauge block be integrated into a traceability chain? Yes, the combination of the nominal size, Grade 1 classification and reference to DIN EN ISO 3650 supports inclusion in documented traceability and calibration systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18 mm Gauge Block, Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of DIN EN ISO 3650 Grade 0 accuracy, a hardened special-steel construction and the compact 18 mm nominal size for reproducible reference measurements; order the single gauge block directly via Metav Werkzeuge or request advice from our consultants for integration into existing calibration sets. Single Gauge Block 18 mm — DIN EN ISO 3650, Grade 0 (Metav IndustryLine) The Single Gauge Block 18 mm is a precision reference standard for laboratory and workshop calibration tasks, suitable as a traceable length standard and for checking micrometres and plug gauges. DIN EN ISO 3650 Grade 0 accuracy Hardened special-steel construction Compact 18 mm nominal size Suitable for calibration sets and traceable checks Consistent reference accuracy for reliable results A gauge block certified to DIN EN ISO 3650 and specified as Grade 0 provides a clearly defined tolerance band for precision work. This classification means the block serves as a trustworthy length reference in calibration procedures and quality control routines, enabling repeatable results when used to check instruments or set up comparative measurements. The standardised specification reduces uncertainty in inspection chains and supports compliance with internal quality procedures. Robust material and compact geometry for everyday use Manufactured from hardened special steel, the block resists wear and preserves its dimensions during routine handling. The compact profile and defined cross-section ensure low deformation under manual contact, keeping the reference stable even with repeated use. These properties translate into lower replacement frequency and consistent service life, which benefits production environments where durability and long-term stability matter. Practical integration into calibration workflows The compact format and exact nominal size make the block straightforward to incorporate into a calibration set or a workshop inspection routine. As a single, portable reference, it simplifies comparative checks and helps maintain traceability across measuring instruments. The combination of standard conformity and sturdy construction supports efficient inspection processes and reduces downtime associated with recalibration or uncertainty investigations. For assured dimensional standards from Metav IndustryLine, contact Metav Werkzeuge to arrange supply of the M319.180.0 single gauge block and to discuss calibration-set integration Technical Data Article number: M319.180.0 GTIN: 4054469131887 Label: Einzel-Endmaß 18 mm, DIN ISO 3650, Güte 0 DIN ISO 3650 Facts Nominal size: 18 mm Tolerance class: Grade 0 Weight: 0.035 kg Tariff number: 90173000 Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 compliance Cross-section: up to 10 mm → 30 x 9 mm; from 10.1 mm → 35 x 9 mm Category: Gauge block / End mass FAQ What does Grade 0 mean for measurement uncertainty? Grade 0 denotes a narrow tolerance according to DIN EN ISO 3650, providing a reliable reference for routine calibration and comparative checks with low uncertainty. Is the block suitable for use in a calibration set? Yes, the single gauge block is intended as a portable length standard and integrates easily into calibration sets for micrometres, verniers and other dimensional checks. What material is used and how does it affect longevity? The block is made of hardened special steel, which increases wear resistance and dimensional stability during repeated handling and use. Can the M319.180.0 be used as a master for workshop inspections? The M319.180.0, compliant with DIN EN ISO 3650 and Grade 0, serves as a traceable reference for workshop inspections and routine verification tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.5 mm Gauge Block, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of Grade 0 accuracy, conformity to DIN EN ISO 3650 and hardened special steel for reliable, repeatable reference measurements; order the gauge block directly via Metav Werkzeuge or consult our specialists for procurement and application advice. Gauge block (end measure) 18.5 mm — Grade 0, DIN EN ISO 3650 Gauge block 18.5 mm for high-precision length references in calibration labs and quality control, suitable as a reference standard or for stack combinations. Grade 0 accuracy (DIN EN ISO 3650) Nominal length 18.5 mm Hardened special steel GTIN 4054469131900, SKU M319.185.0 Precision that secures measurement chains The Grade 0 classification and compliance with DIN EN ISO 3650 ensure this gauge block functions as a trusted length reference in laboratory and workshop environments. As a slip gauge, it provides a stable datum for comparison measurements and the calibration of micrometres or callipers. The nominal size of 18.5 mm is useful both as a standalone reference and as part of stacked sets, allowing flexible build-ups while maintaining traceability and low uncertainty for routine checks. Durable construction for repeated, reliable use Manufactured from hardened special steel, the block resists wear and maintains surface integrity under regular use. The hardened material and precise machining reduce the likelihood of dimensional drift, which benefits quality control processes that demand long-term reproducibility. The compact form and defined cross-section simplify handling and stacking; this robustness translates to less downtime for replacements and consistent measurement outcomes in production and inspection workflows. Practical fit for calibration and routine inspection Compact and purpose-designed, this end measure is suited to calibration benches and transfer standards. Its conformity to an established international norm facilitates documentation and audit trails in quality systems, while the clear identification via SKU M319.185.0 and GTIN 4054469131900 supports inventory and process control. The combination of standard compliance and durable material offers a cost-effective route to maintain measurement quality across workshops and laboratories without compromising on traceability or repeatability. For procurement or technical advice on this Grade 0 gauge block, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored guidance and supply options Technical data Article number: M319.185.0 GTIN: 4054469131900 SKU: M319.185.0 Norm: DIN EN ISO 3650 Quality grade: 0 Nominal length: 18.5 mm Weight: 0.039 kg Tariff number: 90173000 Facts Nominal size 18.5 mm Weight 0.039 kg Quality grade 0 (high precision) GTIN and SKU for traceability Special features Material: hardened special steel Category: gauge block / end measure Suitable for reference and stacking combinations Conforms to international metrology standard DIN EN ISO 3650 FAQ What tolerance class does this gauge block have? The gauge block is supplied in Grade 0, meeting the tolerance and surface requirements specified by DIN EN ISO 3650 for high-precision reference use. Is the block suitable for use in a calibration laboratory? Yes. The gauge block 18.5 mm is intended for calibration benches and inspection tasks where a Grade 0 reference standard is required. What material is the gauge block made from and why does it matter? This end measure is made from hardened special steel, chosen for wear resistance and dimensional stability to ensure long-term repeatability in routine measurements. Can this gauge block be used in stacked combinations? Yes. The nominal length and precise machining allow safe stacking with other blocks for build-ups while preserving measurement integrity. How is the product identified for inventory and traceability? Identification is provided via SKU M319.185.0 and GTIN 4054469131900, which support catalogue management and traceable documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.5mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of Grade 1 dimensional accuracy and the intrinsic thermal stability of ceramic for a reliable reference standard at 18.5 mm; order the gauge block directly via Metav Werkzeuge or consult our technical advisors for application advice. Ceramic gauge block 18.5 mm (Grade 1 DIN 861/1) — Metav IndustryLine A Ceramic gauge block 18.5 mm, Grade 1 DIN 861/1 serving as a compact, stable length standard for calibration benches, inspection tasks and precision setup work Grade 1 accuracy (DIN 861/1) Ceramic for thermal and wear stability Nominal length 18.5 mm Lightweight 35 g for easy handling Reliable reference for routine calibration and setup The Grade 1 specification according to DIN 861/1 means the block is suitable where tight but practical tolerances are required for workshop and inspection work. Manufactured from ceramic, the block offers improved dimensional stability against thermal changes compared with many steels, which reduces drift during short-term measurements. This behaviour makes the component a dependable length standard for setting micrometers, verifying gauges and checking small fixtures. The nominal value 18.5 mm is suitable for building up master stacks or checking specific tool offsets, providing a compact and precise reference in daily metrology tasks. Practical handling benefits and workplace efficiency At just 35 g, the block is easy to manoeuvre and position, supporting quick measurement cycles without cumbersome mass. The ceramic composition delivers wear resistance that helps preserve the reference surface over repeated use, which contributes to longer service intervals and predictable performance. For production environments where traceable checks and reproducible setups speed up throughput, this slip gauge reduces the time spent compensating for thermal or wear-related variation. The compact format also eases storage and transport between bench and inspection station while maintaining a stable reference for fast checks. Clear guidance for care and intended applications Routine care—cleaning with a soft, lint‑free cloth and avoiding impacts—is sufficient to retain the block’s metrological quality over time. The item is primarily intended as a precision reference for quality control, tool setting and inspection in mechanical workshops and small laboratories. Where a certified calibration or specific traceability statement is required, Metav Werkzeuge can advise on appropriate calibration pathways and documentation. The ceramic construction ensures compatibility with a wide range of dimensional control tasks while remaining lightweight and robust for everyday use. For precise short-length standards, choose the Metav IndustryLine ceramic block 18.5 mm — order or request specification advice directly from Metav Werkzeuge in Emmerich for tailored guidance and swift supply. Technical data Article number: M324.018.5 GTIN: 4054469143255 Material: Ceramic Nominal length: 18.5 mm Weight: 0.035 kg Grade: 1 (DIN 861/1) Tariff code: 90173000 Facts Nominal length: 18.5 mm Weight: 0.035 kg Grade: 1 DIN 861/1 Tariff number: 90173000 Special features Ceramic material Category: Endmasse (gauge block) Manufacturer brand: Metav IndustryLine SKU: M324.018.5 FAQ What accuracy can be expected from this ceramic gauge block? The Ceramic gauge block 18.5 mm, Grade 1 DIN 861/1 (M324.018.5) conforms to Grade 1 tolerances under DIN 861/1, providing a dependable reference for workshop and inspection measurements where this class is specified. Is the ceramic block suitable for use in a temperature‑controlled laboratory? Yes, the ceramic composition of the Ceramic gauge block 18.5 mm, Grade 1 DIN 861/1 helps reduce thermal drift compared with many metallic blocks, making it well suited to temperature‑stable environments and repeatable measurements. Can this gauge block be used to set micrometers and gauges? The block is intended as a length standard and is ideal for setting micrometers, verifying calipers and building master stacks; the Grade 1 accuracy supports routine calibration and setup operations. What handling precautions are recommended for the gauge block? Handle the Ceramic gauge block 18.5 mm, Grade 1 DIN 861/1 with care: avoid shocks, keep faces clean and dry, and store in a protective environment to preserve the reference surfaces and dimensional stability. Is this product traceable by SKU or GTIN? Yes, the item is identified as M324.018.5 and carries the GTIN 4054469143255, which supports inventory control and traceability in quality systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18.5mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy, hardened special steel construction and conformity to DIN EN ISO 3650 for reliable reference measurements. Order the gauge directly via Metav Werkzeuge or ask the consultants at Metav for technical advice. End gauge 18.5 mm — Gauge block, DIN EN ISO 3650 Grade 1 (Metav IndustryLine) End gauge 18.5 mm is a compact gauge block designed as a precision reference for calibration and reference measurements in metrology laboratories and workshop quality control. *DIN EN ISO 3650 Grade 1 accuracy *Hardened special steel construction *Compact reference for laboratory calibration *Suitable for precision inspection tasks Precise reference for calibration and quality control The 18.5 mm end gauge serves as a stable reference standard, providing repeatable dimensional checks where traceability and conformity matter. Manufactured to DIN EN ISO 3650 and classified as Grade 1, this gauge block fulfils the expectations for fine workshop and laboratory inspection tasks. The nominal size is clearly stated as 18.5 mm, which simplifies documentation and integration into existing gauge sets. By specifying an established international standard, the product supports clear quality procedures and audit trails. Durable construction to reduce wear and measurement drift Made from hardened special steel, the block is engineered for durability and resistance to surface wear, which contributes to stable measurement results over many cycles of use. The material selection and heat treatment deliver a wear-resistant contact surface that helps maintain the original dimensions of the reference. The cross-section for this nominal size is 35 x 9 mm, providing sufficient mass and stiffness for stable placement during inspection without compromising handling for single-person operation. Designed for everyday inspection workflows and documentation Conformity to DIN EN ISO 3650 and the Grade 1 designation allow straightforward use of the gauge in calibration routines, comparative checks and quality control documentation. The piece integrates directly into bench inspection procedures as a compact end gauge or as a member of a gauge block set, supporting routine dimensional verification and tool-setting tasks. As part of the Metav IndustryLine, the unit is intended to fit seamlessly into procurement lists for workshops, small labs and production quality departments that prioritise dependable reference standards. For delivery and procurement of this Metav IndustryLine end gauge, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: M319.185.1 GTIN: 4054469131917 Tariff number: 90173000 Norm: DIN EN ISO 3650 Nominal size: 18.5 mm Material: Special steel, hardened Grade: 1 Facts Weight: 0.039 kg Cross-section applicable: 35 x 9 mm Category: End gauges (gauge blocks) SKU: M319.185.1 Special features Precision reference for calibration Conforms to DIN EN ISO 3650 Grade 1 Hardened contact surfaces for wear resistance Compact format for laboratory and workshop use FAQ What accuracy does this end gauge provide? The gauge meets Grade 1 tolerances as specified in DIN EN ISO 3650, making it suitable as a reliable reference in routine inspection and comparative measurements. What material is used for the gauge and why does it matter? The block is made from hardened special steel, which offers increased wear resistance and dimensional stability compared with untreated steels, ensuring reproducible measurements over time. Which cross-section applies to this nominal size? For the 18.5 mm nominal size the applicable cross-section is 35 x 9 mm, providing the necessary stiffness for stable placement during inspection (SKU M319.185.1, Metav IndustryLine). Is this gauge suitable for laboratory calibration routines? Yes. The unit is designed as a compact reference standard compliant with DIN EN ISO 3650 Grade 1, appropriate for calibration, routine checks and quality control tasks in workshops and small metrology labs. How is the product identified for ordering and inventory? Order and inventory identification can use the SKU M319.185.1 and the GTIN 4054469131917; the product is sold under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
The combination of Grade 1 accuracy to DIN 861/1 and a stable ceramic construction ensures a reliable length standard for inspection and calibration tasks; its compact 18 mm nominal size supports versatile use in laboratory and workshop sets. Order the gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 18 mm, Grade 1 (DIN 861/1) — Metav IndustryLine A Ceramic gauge block 18 mm, Grade 1 serving as a compact, high‑accuracy length standard for calibration, quality control and dimensional inspection tasks Grade 1 accuracy to DIN 861/1 Wear‑resistant ceramic construction Nominal length 18 mm for reference stacks Compact and lightweight at 34 g Reliable reference for calibration and inspection The Ceramic gauge block 18 mm, Grade 1 is designed as a stable reference for routine calibration and comparative measurement. Conforming to DIN 861/1 and specified as Grade 1, it provides the dimensional precision required for traceable length standards without excess bulk. As a compact length standard, it supports efficient set assembly and straightforward integration into existing inspection routines, contributing to consistent measurement outcomes. Material advantages that reduce maintenance Manufactured from ceramic, this block combines high surface hardness with wear‑resistant behaviour, which extends the service life compared with softer materials. The ceramic body is dimensionally stable and resists common workshop influences that can affect steel gauges, making it suitable for frequent handling. These material characteristics translate into fewer replacements and lower life‑cycle intervention, preserving the original calibration state for longer periods. Practical handling and workflow benefits Weighing just 0.034 kg, the block’s compact and lightweight format makes it practical for portable gauge sets and rapid comparison tasks on the shop floor. As a single, precise reference standard, it complements modular gauge stacks and supports repeatable inspection sequences. The combination of small footprint and Grade 1 tolerance helps to speed up routine checks while maintaining the reliability expected in calibration environments. Choose Metav IndustryLine when a durable, Grade 1 ceramic reference is required; contact Metav Werkzeuge for tailored advice or to secure compatible gauge sets and accessories by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M324.018 GTIN: 4054469143248 Label: Ceramic gauge block 18 mm, Grade 1 DIN 861/1 Facts Nominal length: 18 mm Grade: 1 Weight: 0.034 kg Tariff code: 90173000 Special features Material: Ceramic Standard: DIN 861/1 Category: End gauges (gauge blocks) ECLASS: 21170108 FAQ What accuracy class does this gauge block meet? The block is specified as Grade 1 under DIN 861/1, indicating a high level of dimensional accuracy suitable for many calibration and inspection tasks. Is the material suitable for frequent shop use? Yes, the ceramic construction offers wear‑resistant properties that make the gauge block appropriate for repeated handling and routine comparative measurements. Can this 18 mm standard be combined with other gauge blocks? The 18 mm nominal length is intended for use in modular reference stacks and will integrate with other standard gauge blocks to build the required length combinations. Does the product data specify calibration status or certificate? Calibration status is not detailed in the provided product data; the specification focuses on material and Grade 1 conformity under DIN 861/1. What applications are typical for this gauge block? Typical uses include laboratory calibration, quality control checks, dimensional inspection and incorporation into reference stacks for comparative measurement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19 mm Gauge Block Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Compact 19.00 mm Grade 1 end gauge in hardened special steel provides reliable dimensional reference and conformity to DIN EN ISO 3650, enabling consistent inspection results and repeatable setup checks; order the End gauge 19 mm directly via Metav Werkzeuge or ask our consultants if needed. End gauge 19 mm — DIN EN ISO 3650 Grade 1, hardened special steel (Metav IndustryLine) The End gauge 19 mm is a hardened verification gauge designed for precise nominal‑size checks in workshop inspection, incoming goods control and production setup. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 19.00 mm Cross-section 35 x 9 mm for >10.1 mm Trusted standards and repeatable inspection outcomes The gauge is manufactured to DIN EN ISO 3650 and classified as Grade 1, which defines a high level of dimensional conformity for end standards. This classification supports systematic quality control and reduces uncertainty during routine checks. As a compact reference piece with a 19.00 mm nominal size, it is suitable for frequent verification tasks where a clearly defined reference is required. The normative designation means coordination with inspection plans and documentation is straightforward, facilitating traceable acceptance criteria in production and incoming inspection. Robust material and geometry for long service life Constructed from hardened special steel, the instrument resists wear and maintains stable dimensions under repeated use. The given cross-section 35 x 9 mm (applicable for nominal sizes above 10.1 mm) adds profile stiffness that eases handling and reduces bending-related measurement error. Weight and compact form factor allow simple placement in inspection jigs and fixtures while the material treatment ensures long-term surface integrity. For workshop environments where handling and throughput matter, this combination of material and section preserves the reference geometry over many inspection cycles. Practical use and integration into quality routines This precision reference is intended for direct size verification tasks, fixture set‑up and comparative checks across batches. In practice, the gauge is used as a quick go/no‑go reference or as a measured standard in visual or tactile inspection sequences. The simple design reduces the need for complex fixturing while providing a stable datum for repeat measurements. Where traceable standards are required for internal quality records, the normative compliance simplifies documentation and harmonises inspection routines across multiple operators or shifts. Choose Metav IndustryLine precision: request supply and technical advice from Metav Werkzeuge in Emmerich to ensure the right nominal standard is integrated into the inspection process Technical Data Article number: M319.190.1 GTIN: 4054469131931 SKU: M319.190.1 Facts Nominal size: 19 mm Weight: 0.042 kg Harmonised tariff number: 90173000 Cross-section: 35 x 9 mm (for nominal >10.1 mm) Special features Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 1 Category: End gauges / End standards FAQ What level of conformity does this gauge provide? The gauge meets DIN EN ISO 3650 and is specified as Grade 1, providing a high level of dimensional conformity suitable for routine inspection and verification tasks. What material is the gauge made from? The instrument is manufactured from hardened special steel, which offers wear resistance and dimensional stability for repeated use. For which applications is the 19 mm reference suitable? This 19 mm reference is intended for nominal‑size verification, fixture set‑up and incoming goods inspection in workshop and production environments. Is a calibration certificate included with the gauge? The product data does not specify an included calibration certificate; standard delivery conditions apply unless a calibrated variant or certificate is explicitly requested. Which product identifiers should be used for ordering? Use the article number M319.190.1 and GTIN 4054469131931 when placing orders or requesting product information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19 mm Gauge Block, Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of a DIN EN ISO 3650 reference with tolerance grade 0 and a hardened special steel body for long-term wear resistance; order this precision end measure directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Single End Measure 19 mm — DIN EN ISO 3650, tolerance grade 0, hardened special steel The Single End Measure 19 mm is a hardened precision gauge block designed as a stable length reference for inspection, calibration and workshop measurement tasks. DIN EN ISO 3650, tolerance grade 0 Hardened special steel construction 35 × 9 mm cross-section for stable handling Reference accuracy for calibration chains Built to DIN EN ISO 3650 and specified as tolerance grade 0, this precision end measure serves as a reliable length standard in inspection and calibration workflows. The nominal 19 mm dimension provides a definitively traceable reference for comparative checks and gauge set composition. Specified tolerances reduce uncertainty during routine verification tasks, which improves throughput in quality control processes and supports consistent results across repeated measurements. Robust construction for repeatable use Manufactured from hardened special steel, the component resists surface wear and retains dimensional stability under normal workshop conditions. The larger cross-section of 35 × 9 mm (applicable for nominal sizes above 10.1 mm) offers a comfortable and firm support when handled or stacked with other blocks. With a mass of 0.042 kg the piece is compact yet sufficiently weighted for steady placement, reducing the chance of accidental displacement during fine alignment or comparator use. Identification and traceability simplified Marked with the article reference M319.190.0 and GTIN 4054469131924, the unit is prepared for straightforward inventory control and integration into an existing calibration system. The concise format and standardised tolerance class make it suitable for lab benches, workshop toolrooms and metrology sets where orderly documentation and rapid identification are essential for process reliability and audit readiness. Practical application and compatibility The single end measure functions as an elemental length standard within sets or as an individual reference for immediate verification tasks. Compliance with the ISO standard ensures interoperability with other DIN EN ISO 3650 gauge blocks and supports harmonised measurement practice across suppliers and test benches. The hardened steel construction is appropriate for repeated contact with other blocks and measuring faces; maintenance is limited to gentle cleaning and corrosion protection to preserve dimensional integrity. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating this Metav IndustryLine end measure into existing calibration sets or to request technical specifications and supply options Technical Data Article number: M319.190.0 GTIN: 4054469131924 Category: End measures SKU: M319.190.0 Facts Nominal size: 19 mm Weight: 0.042 kg Cross-section: 35 × 9 mm Tariff number: 90173000 Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Tolerance: Grade 0 Label: Einzel-Endmaß 19 mm, DIN ISO 3650, Güte 0 DIN ISO 3650 FAQ What tolerance class does this end measure have? The end measure is delivered to tolerance grade 0 in accordance with DIN EN ISO 3650, making it suitable as a high-precision reference in calibration and inspection contexts. Is the end measure supplied calibrated to an accredited standard? No specific calibration certificate is stated for this item. The product is supplied as a DIN EN ISO 3650 grade 0 end measure; accredited calibration (e.g. ISO 17025) can be arranged separately if required for laboratory traceability. What material is used for the gauge block? The block is produced from special steel, hardened, chosen for wear resistance and dimensional stability under normal workshop use. Which cross-section applies to the 19 mm size? For nominal sizes above 10.1 mm the applicable cross-section is 35 × 9 mm, which provides improved handling stability for this 19 mm reference. How is the product identified for inventory and procurement? Identification is possible via the article number M319.190.0 and GTIN 4054469131924, both referenced on the product specification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.5 mm End Gauge Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Combine Grade 0 accuracy with hardened special steel and a compact 19.5 mm nominal size for a dependable length reference in quality control. Order directly via Metav Werkzeuge or contact our consultants for application advice and supply. Gauge block 19.5 mm (Grade 0) — hardened special steel | Metav IndustryLine A gauge block 19.5 mm designed as a high-precision length reference for calibration and inspection in laboratories and production metrology Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel for long-term wear resistance Nominal length 19.5 mm for precise reference measurements Compact cross-section 35×9 mm for stable handling Reliable reference for precise length checks This gauge block is manufactured to DIN EN ISO 3650 and supplied in Grade 0, making it suitable where reproducible, traceable reference lengths are required. The 19.5 mm nominal size provides a standard datum for setting and checking instruments such as micrometres and calipers, and for building combination stacks in inspection routines. Because the block is made from hardened special steel, mechanical stability and resistance to surface wear are prioritised, which preserves the reference dimension over repeated use. The specification-focused design supports efficient quality workflows by reducing rework and uncertainty in dimensional verification. Robust construction for routine workshop and laboratory use The block’s section follows the larger-profile dimension for pieces above 10.1 mm, with a 35×9 mm cross-section that balances stiffness with convenient handling. At around 0.046 kg, the piece is easily positioned and manipulated without compromising mass-related thermal inertia needed for short-term dimensional stability. The hardened steel surface withstands frequent wringing and contact with other gauge blocks or measurement tools, promoting consistent measurement results and lower life-cycle maintenance. Practical design elements translate into fewer downtimes for replacement and a predictable service life under normal workshop or laboratory conditions. Practical benefits and integration into inspection routines Incorporating this end measure into incoming inspection, process control or calibration benches streamlines traceable verification of measuring equipment and parts. The block enables rapid checks during production runs and supports the construction of accurate gauge stacks for stepwise measurement tasks. As part of the Metav IndustryLine range, the component complements a broad portfolio of precision instruments and workshop supplies, simplifying procurement and logistics for maintenance and quality teams. The combination of conformity to an established standard and robust material choice delivers a clear return in reliability and reduced measurement uncertainty. For professional Grade 0 reference requirements, contact Metav Werkzeuge in Emmerich for specialist advice and supply through the Metav IndustryLine range. Technical data SKU: M319.195.0 GTIN: 4054469131948 Article description: Single gauge block 19.5 mm Facts Nominal size: 19.5 mm Weight: 0.046 kg Cross-section: 35×9 mm Tariff number: 90173000 Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 0 Category: Gauge blocks / End measures FAQ What level of accuracy does this gauge block provide? The gauge block meets Grade 0 requirements under DIN EN ISO 3650, making the 19.5 mm block suitable as a high-precision reference for routine calibration and inspection tasks. Can this block be used in combination stacks for larger lengths? Yes, the 19.5 mm block can be combined with other gauge blocks to form precise stacks; its standardised dimensions and Grade 0 tolerance support reliable stacking for extended length references. Is the material suitable for frequent wringing and use in a workshop? The block is made from hardened special steel, chosen for surface hardness and wear resistance, which makes it appropriate for regular wringing and handling in both laboratory and workshop environments. Which applications are typical for this end measure? Typical uses include verification of micrometres and calipers, creation of gauge stacks for inspection, and use as a workshop reference in quality-control procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.5 mm Gauge Block, Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
This Grade 1 gauge block combines DIN EN ISO 3650 conformity with a hardened special steel construction for dependable, repeatable measurements — order the End gauge directly via Metav Werkzeuge or consult our technical team for application advice. End gauge 19.5 mm — Grade 1, DIN EN ISO 3650, hardened special steel (Metav IndustryLine) The End gauge 19.5 mm is a precision gauge block for dimensional verification and reference measurements in workshop and laboratory metrology. Conforms to DIN EN ISO 3650 Grade 1 accuracy Hardened special steel for long-term stability Compact, lightweight 35 x 9 mm cross-section Clear identification with SKU M319.195.1 Precision that supports reliable quality control A Grade 1 gauge block manufactured to DIN EN ISO 3650 provides a reproducible reference for production inspection and calibration routines. The high specification ensures dimensional interchangeability across different instruments and workplaces, reducing systematic deviations during incoming and final inspections. Using a standardised reference reduces rework and supports consistent process capability results. Robust design for repeatable handling and storage The block’s hardened special steel body and compact form deliver mechanical resilience during routine use. The cross-section of 35 x 9 mm (applies to nominal sizes above 10.1 mm) gives a stable grip and resists bending, which helps maintain measurement fidelity over repeated cycles. The lightweight construction facilitates quick handling while preserving the surface integrity required for accurate contact measurements. Easy identification and practical workshop integration Marked with SKU M319.195.1 and GTIN, the gauge block is straightforward to log into traceability systems and inventory lists. Its nominal 19.5 mm size makes it suitable as a calibration standard or comparative reference within dimensional chains of gauges. The solid construction and conformity to recognised standards make it a practical choice for machine shops, inspection benches and calibration labs seeking dependable reference artefacts. Choose the Metav IndustryLine End gauge M319.195.1 from Metav Werkzeuge for stable, standards‑compliant references — contact Metav Werkzeuge for tailored advice and rapid supply Technical Data Article number: M319.195.1 GTIN: 4054469131955 Material: special steel, hardened Norm: DIN EN ISO 3650 Grade: 1 Category: End gauges Facts Nominal size: 19.5 mm Weight: 0.046 kg Cross-section: 35 x 9 mm (for sizes > 10.1 mm) Tariff number: 90173000 Special features Conformity with DIN EN ISO 3650 Grade 1 accuracy for reproducible references Hardened surface for wear resistance SKU for stock and traceability: M319.195.1 FAQ What does Grade 1 mean for this gauge block? Grade 1 indicates the block meets the dimensional quality and surface standards defined in DIN EN ISO 3650, making the End gauge 19.5 mm suitable as a reliable workshop reference. Is the material suitable for regular workshop use? Yes, the End gauge 19.5 mm is made from hardened special steel, which provides wear resistance and stable dimensional performance under normal handling. Can this gauge block be used for calibration routines? The 19.5 mm gauge block is designed for reference tasks and can be integrated into calibration and verification procedures where a DIN EN ISO 3650 Grade 1 artefact is required. How is the product identified for inventory and ordering? The gauge is listed under SKU M319.195.1 and GTIN 4054469131955, which simplifies ordering and stock management. Which applications benefit most from this end gauge? Applications that demand repeatable length references—such as inspection benches, comparators and workshop control stations—benefit from the stable reference provided by this Grade 1 gauge block. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19.5mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of a ceramic length standard that combines material stability and Grade 1 precision for reliable reference measurements; with a compact 19.5 mm nominal length and low mass, the block is easy to handle and integrates smoothly into calibration routines. Order directly via Metav Werkzeuge or contact their consultants for compatibility and delivery advice. Ceramic gauge block 19.5 mm, Grade 1 (DIN 861/1) — compact precision length standard The Ceramic gauge block 19.5 mm, Grade 1 (DIN 861/1) is a compact length standard intended for calibration and reference measurements in metrology benches, quality control stations and precision workshops. Ceramic material for thermal stability Grade 1 accuracy to DIN 861/1 19.5 mm nominal length, compact format Consistent reference with ceramic advantages A ceramic gauge block offers long-term dimensional stability and excellent resistance to wear and corrosion compared with many metallic reference pieces. The combination of a stable substrate and the Grade 1 classification under DIN 861/1 provides a trustworthy length standard for routine verification tasks and setting precision instruments. This stability reduces drift between checks, which helps maintain consistent tolerances on production parts and inspection equipment. Compact format for flexible workshop and laboratory use The short 19.5 mm nominal length and lightweight construction (approx. 0.037 kg) make this block simple to manipulate during gauge stack assembly or comparator setup. The compact size is particularly useful when space is limited at a measuring bench or when establishing short-reference stacks for micrometre calibration. Handling benefits translate into time savings during repetitive checks and reduce handling-induced measurement variability. Practical benefits: traceability, handling and integration As a precision end standard, the block is suited to reference measurements, instrument setting and integration into gauge block sets. The ceramic material supports stable measurements across typical workshop temperature fluctuations and reduces surface wear during repeated wringing and separation cycles. The compact design also simplifies storage and transport within the workshop workflow while preserving reference accuracy for inspection tasks. Contact Metav Werkzeuge in Emmerich to discuss how the Metav IndustryLine ceramic gauge block (SKU M324.019.5) fits into existing calibration routines or to arrange purchase and secure delivery Technical data Article number: M324.019.5 GTIN: 4054469143279 Tariff number: 90173000 Facts Nominal length: 19.5 mm Weight: 0.037 kg Grade: 1 (DIN 861/1) Special features Material: Ceramic Category: Endmasse (gauge block) Label: Keramik-Endmaß 19,5 mm, Güte 1 DIN 861/1 FAQ What applications suit this ceramic gauge block best? The ceramic gauge block is ideal for short-reference stacks, micrometre setting and comparator checks where a 19.5 mm compact standard and Grade 1 accuracy are required. How does the ceramic material affect measurement stability? Ceramic provides reduced thermal expansion and enhanced surface durability, helping to maintain the block’s dimensional integrity over repeated use and contributing to reliable reference measurements. Can this block be combined with steel gauge blocks? Yes, the block can be used in mixed stacks, though differences in thermal behaviour between ceramic and steel should be considered when assembling reference stacks for highest precision. Is the Metav IndustryLine gauge block suitable for workshop environments? The compact size and wear-resistant ceramic surface make it suitable for both workshop and laboratory settings where a small, stable reference piece is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic material and Grade 1 tolerance for a reliable length reference; the compact 19 mm nominal size and low mass allow quick handling and repeatable set‑ups in inspection routines. Order the gauge block directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Ceramic gauge block 19 mm — Grade 1, DIN 861/1 (Metav IndustryLine) The Ceramic gauge block 19 mm, Grade 1 DIN 861/1 is a compact, high‑stability length standard designed for precision reference and transfer measurements in workshop and laboratory environments Precision Grade 1 per DIN 861/1 Stable ceramic material for dimensional constancy Nominal size 19 mm reference Lightweight 36 g for easy handling Stable reference length for consistent inspection The 19 mm ceramic gauge block provides a stable reference for routine dimensional checks and calibration tasks. Made of ceramic, the block exhibits thermal stability that helps minimise length drift during temperature changes, which is essential when consistent reference lengths are required across multiple measurement sessions. The conformity to DIN 861/1 and Grade 1 classification denotes a stringent manufacturing tolerance, making this block suitable as a workshop standard where repeatability and traceability are priorities. In practice, a ceramic reference block like this is used as a baseline for setting micrometers, verifying comparator settings or checking height gauges. Durable, low‑maintenance material for long service life The use of ceramic confers distinct wear resistance compared with many metallic gauges, preserving the reference surface over extended use. Its intrinsic properties reduce susceptibility to corrosion and minimise routine maintenance, so the block retains its dimensional integrity without frequent intervention. At 36 g the piece is lightweight, which aids rapid swapping and manual handling during inspection processes while lowering the risk of operator fatigue. Simple care—cleaning with a lint‑free cloth and storing in a protective box—will preserve the reference surface and keep measurement uncertainty low. Practical integration and traceability in workflows As a compact length standard, this block suits small‑to‑medium production and calibration tasks where a precise, portable reference is required. The Grade 1 tolerance makes it compatible with common inspection equipment and quality control routines, enabling efficient checks without resorting to laboratory‑only artefacts. The product is identified by SKU M324.019 and GTIN 4054469143262 for inventory and traceability purposes; these identifiers facilitate documentation in quality systems and simplify procurement and stock management. For specialised traceability or calibration requirements, Metav Werkzeuge can advise on suitable procedures and accompanying documentation. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine ceramic gauge block into existing inspection routines or to request procurement and delivery details Technical data Article number: M324.019 GTIN: 4054469143262 Tariff number: 90173000 Category: Gauge blocks (Endmasse) Facts Nominal size: 19 mm Weight: 0.036 kg Tolerance class: Grade 1 Standard: DIN 861/1 Special features Material: Ceramic Brand: Metav IndustryLine Label: Keramik-Endmaß 19 mm, Güte 1 DIN 861/1 FAQ What tolerance and standard does this gauge block meet? The ceramic gauge block meets Grade 1 tolerances according to DIN 861/1, providing a defined accuracy class for workshop reference and routine inspections. Is the material suitable for long‑term use in a shop environment? Yes, the ceramic construction offers high wear resistance and reduced corrosion risk, which supports long‑term dimensional stability under normal workshop handling. How is the product identified for procurement and inventory? The item is listed under SKU M324.019 and GTIN 4054469143262, which can be used for ordering and documentation within quality systems. Can this block be used for calibration of hand tools and comparators? The 19 mm reference is suitable for setting and verification of various measuring instruments; compatibility depends on the required reference length and the instrument’s specification. What handling or storage is recommended to preserve measurement accuracy? Handle the block with clean hands or gloves, keep surfaces free of debris, and store in a protective container when not in use to maintain the reference surface and minimise contamination. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1x1,005/20x1,01‑1,2/7x1,3‑1,9/9x1‑9/10x10‑100 Hardmetal Parallel Gauge Set 47 Pieces DIN EN ISO 3650
Take advantage of the combination of carbide durability, conformity to DIN EN ISO 3650 and a compact transport case for reliable, repeatable reference measurements. Order the Carbide parallel gauge block set (M322.470) directly via Metav Werkzeuge or ask our consultants if needed. Carbide parallel gauge block set M322.470 – 47-piece, DIN EN ISO 3650 Carbide parallel gauge block set M322.470 provides hardened reference surfaces for precise workshop inspection and fixture setup across industrial metrology applications Carbide measuring faces for long service life Conforms to DIN EN ISO 3650 standard Complete 47-piece reference set Delivered in a protective transport case Stable reference for reliable measurement results The set delivers a consistent, repeatable baseline for dimensional checks and fixture setting. Constructed from carbide, the measuring faces resist wear and maintain flatness under frequent use, which reduces drift and rework. Compliance with DIN EN ISO 3650 ensures that the components meet recognised tolerances for gauge blocks and parallel measures, enabling straightforward integration into existing QA procedures and statistical process control routines. Efficient workshop workflow and traceability A compact set of reference parallels speeds up inspection cycles and minimises tool changes during set-up. The configuration of multiple sizes within one kit allows for rapid stack combinations and fine adjustment of overall lengths, shortening machine downtime and raising throughput. The solid construction and documented conformity simplify traceability in production records and support consistent part acceptance across shifts and sites. Practical transport and robust handling Supplied in a protective case suitable for workshop transport, the set is arranged to prevent damage during movement and storage. The organised layout ensures quick access on the bench and safer stacking when parts are returned. At a total weight of 3.7 kg the kit remains portable for mobile measurement tasks while the carbide composition keeps calibration intervals longer compared with softer materials. Applications, care and best practice Designed for general metrology, tooling set‑up and inspection tasks, the set is well suited to calibration benches, fixture alignment and comparative measurement. Routine care—cleaning with a lint-free cloth and storage in the supplied case—preserves the measuring faces. When used as reference standards, these parallels help to reduce measurement uncertainty and support reproducible results in machine shops and quality departments. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine carbide gauge block set M322.470 fits into inspection routines and to request order or specification advice Technical data SKU: M322.470 GTIN: 4054469132716 Pieces per set: 47 Material: Carbide Standard: DIN EN ISO 3650 Weight: 3.7 kg Tariff number: 90173000 Numbers / Core technical data Number of pieces: 47 Total weight: 3.7 kg GTIN: 4054469132716 Tariff number: 90173000 Special features / Versions Carbide measuring faces Conformity to DIN EN ISO 3650 Supplied as a set (47 pieces) Protective transport case included Category: End gauges / gauge blocks FAQ What material are the measuring faces made from? The measuring faces are manufactured from carbide, providing high wear resistance and long service life for the gauge block set M322.470. Does the set comply with industry standards? Yes, the kit conforms to DIN EN ISO 3650, ensuring the parallels meet recognised tolerance and quality criteria for reference measures. How is the set delivered and stored? The Metav IndustryLine 47-piece set is supplied in a protective transport case to safeguard the components during movement and storage. Can the components be used for fixture and machine set-up? The parallels in this set are suitable for fixture alignment, comparative measurement and quick stack combinations when setting up machines. Is the set suitable for everyday workshop use? With carbide faces and a protective case, the set is designed for frequent use in production and quality-control environments; regular cleaning and correct storage will extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of Grade 1 accuracy, a 2 mm nominal length and stable ceramic construction for a compact, reliable reference standard; order the gauge block directly via Metav Werkzeuge or consult the specialists if specific tolerances or applications need clarification. Ceramic gauge block 2 mm — Grade 1 precision, compact length standard (Metav IndustryLine) A ceramic gauge block 2 mm serving as a small-format length standard for laboratory checks, workshop calibration and instrument verification Grade 1 accuracy to DIN 861/1 Made from ceramic Precision-ground 2 mm nominal length Weight approx. 0.004 kg for easy handling Precision that supports reproducible measurements The compact reference delivers Grade 1 accuracy in accordance with DIN 861/1, providing a defined tolerance band that is suitable for many calibration benches and incoming inspection tasks. As a standardised length master, this small-format block functions as a reliable point of reference for verifying micrometre settings, comparator stages and gauge stacks. The measured tolerance class means the component can be used where repeatability and traceability are required without escalating to laboratory-only artefacts. Material benefits tailored to metrology tasks Constructed from ceramic, the block benefits from the material’s inherent dimensional stability and resistance to common environmental influences found in workshops. Ceramic reference blocks typically offer good wear characteristics and low susceptibility to corrosion, which reduces the need for frequent refurbishment. The 2 mm nominal size and lightweight construction make the item straightforward to handle and integrate into existing gauge sets or slot into tightly packed comparison stacks without disturbing the surrounding standards. Practical use cases and handling guidance This compact length standard is well suited to calibration labs, quality control stations and precision workshops where small nominal lengths are frequently checked. Because of its modest mass and size, the block is convenient for rapid comparative checks and as part of a set of reference lengths. When used as a reference in measurement chains, the block contributes to traceable inspection procedures and helps to shorten setup times for small-batch quality checks. For documentation and audit trails, the SKU and marking ensure clear identification within an inventory system. Contact Metav Werkzeuge for tailored advice on integrating this Grade 1 ceramic gauge block into existing calibration chains and to secure item M324.002 from Metav IndustryLine Technical data Article number: M324.002 GTIN: 4054469142920 Tariff number: 90173000 Weight: 0.004 kg Material: Ceramic Grade: 1 (DIN 861/1) Nominal length: 2 mm Facts Nominal length: 2 mm Weight: 0.004 kg Standard: DIN 861/1 GTIN: 4054469142920 Special features Precision-ground surface Ceramic construction Category: Gauge blocks SKU: M324.002 FAQ What tolerance class does this block comply with? The block is manufactured to Grade 1 tolerance according to DIN 861/1, making it suitable as a workshop reference where Grade 1 accuracy is required. Is the material suitable for everyday workshop use? Yes, the ceramic construction of the gauge block offers robust dimensional behaviour and resistance to typical workshop environments, which supports routine comparative checks. What is the exact nominal length and how is the item identified? The nominal length is 2 mm and the item is listed as SKU M324.002, enabling straightforward traceability in inventory and calibration records. Can this gauge block be combined with other reference lengths? The compact 2 mm block is designed to be combined in gauge stacks and comparative setups; its lightweight and precise finish make integration into standard metrology chains simple. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 mm Gauge Block Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of DIN EN ISO 3650 Grade 0 accuracy, hardened special steel construction and a compact 30×9 mm cross-section for reliable reference measurements and durable shop-floor use. Order the gauge block directly via Metav Werkzeuge or ask our consultants for application advice. Single gauge block 2 mm — gauge block, DIN EN ISO 3650, Grade 0 (Metav IndustryLine) The single gauge block 2 mm is a precision reference standard for dimensional control and set-up tasks in inspection and calibration contexts DIN EN ISO 3650, Grade 0 accuracy Hardened special steel construction Compact cross-section 30×9 mm for 2 mm block Traceable reference with GTIN 4054469131245 Consistent accuracy for reproducible measurements The block conforms to DIN EN ISO 3650 and is specified as Grade 0, which places it among precision reference masters used for comparative and transfer measurements in workshops and inspection labs. This classification means that the component is manufactured to tight geometric and dimensional tolerances, providing a stable reference when establishing gauges, checking micrometres or verifying other length standards. Using a Grade 0 reference reduces uncertainty in routine checks and supports repeatable measurement processes on production lines and in quality control. Robust material and surface quality for long service life Manufactured from hardened special steel, the block resists mechanical wear and retains flatness under normal shop conditions, which translates into fewer replacements and consistent performance over time. The hardened surfaces offer high contact stability during stackings and gauge comparisons, while the compact mass and dimensions make handling straightforward. These material properties are particularly valuable where frequent use is expected, as they preserve the measurement faces and maintain reliable contact geometry across countless comparisons. Compact cross-section reduces distortion and eases handling With a 30×9 mm cross-section applicable to blocks up to 10 mm, this format balances rigidity and ergonomics: the wider section prevents easy bending while keeping the block compact enough for rapid stacking and alignment in gauge sets. The cross-section also simplifies pairing with other blocks and accessories commonly used in inspection benches, ensuring compatibility in modular gauge assemblies. For technicians, this means quicker set-ups and less risk of measurement error due to handling-induced deformation. Integrates into inspection routines and workshop toolkits As a single, traceable reference (SKU M319.020.0) the block fits seamlessly into existing calibration routines and gauge sets, supporting both incoming inspection and in-process checks. The clear identification via GTIN 4054469131245 and the robust construction make it a dependable element in a metrology kit intended for everyday workshop use as well as service benches. Combined with Metav’s position as a quality filter for the European market, this component helps to democratise precision by making reliable reference standards accessible to small and medium-sized workshops as well as larger quality departments. Request the M319.020.0 Grade 0 gauge block from Metav Werkzeuge in Emmerich—our specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitability and delivery Technical data Article number: M319.020.0 GTIN: 4054469131245 Material: Special steel, hardened Nominal size: 2 mm Standard: DIN EN ISO 3650 Grade: 0 Weight: 0.007 kg Cross-section (≤10 mm): 30×9 mm Numbers / Core technical data Nominal size: 2 mm Weight: 0.007 kg Cross-section: 30×9 mm Tariff number: 90173000 Special features Hardened special steel DIN EN ISO 3650 conformity Grade 0 tolerance Cross-section specification for blocks up to 10 mm: 30×9 mm FAQ What tolerance class does this gauge block meet? The gauge block meets DIN EN ISO 3650 and is specified as Grade 0, offering tight dimensional tolerances suitable for reliable reference tasks. What material is the block made from? The block is made from hardened special steel, selected for wear resistance and surface stability under frequent use. Is the block suitable for use in a gauge set? Yes, the single gauge block (SKU M319.020.0) is designed for stacking and pairing in conventional gauge sets and inspection assemblies. Can this block be used for routine workshop checks? The Grade 0 specification and robust construction make the block appropriate as a workshop reference for comparative measurements and set-up verification. What are the block’s dimensions and mass? The nominal size is 2 mm, the cross-section for blocks up to 10 mm is 30×9 mm, and the weight is 0.007 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 mm Gauge Block, Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Benefit from a compact reference standard that combines DIN EN ISO 3650 Grade 1 accuracy with a hardened special‑steel construction and a stable 30 x 9 mm cross‑section for reproducible short‑range measurements. Order directly via Metav Werkzeuge or contact the consultants for bespoke advice. Gauge block 2 mm, DIN EN ISO 3650, Grade 1 (Metav IndustryLine) The gauge block 2 mm provides a certified reference length for laboratory and workshop calibration tasks, designed for short, highly repeatable measurements in precision metrology instruments. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 2 mm for reference stacks Compact cross‑section 30 x 9 mm for stability Reliable reference length for precision checks A hardened, compact reference block supplies a stable, known length for verification of measuring instruments and assembly checks. The 2 mm nominal size is ideal as a building block in slip‑gauge stacks or as a single reference standard for dial indicators and comparators. Compliance with DIN EN ISO 3650 and the Grade 1 designation signal that the component meets strict manufacturing tolerances, making it suitable for routine laboratory checks and workshop calibration where consistent, traceable lengths are required. The small mass and compact geometry also reduce thermal lag during brief handling. Durable construction that holds up in daily use The block is manufactured from hardened special steel, providing wear resistance and long service life under repeated use. The chosen cross‑section of 30 x 9 mm (applicable for nominal sizes up to 10 mm) increases bending stiffness relative to thinner bars, so the reference length remains reproducible when used on benches or in comparison setups. The robust surface finish resists nicks and abrasions that would otherwise affect measurement fidelity, while the compact form factor simplifies storage in instrument cabinets and integration into inspection routines. Practical in the workshop and laboratory context Lightweight and easy to handle, the reference block suits both production environments and quality control laboratories. Its small footprint allows it to be included in portable test kits, while the clear standard marking and traceable identification support documentation in quality systems. For procurement and stocking, the M319.020.1 designation and GTIN simplify ordering and inventory management. Combining standard conformity with sturdy materials delivers a dependable element for everyday metrological tasks. For professional enquiries or to secure the Metav IndustryLine 2 mm gauge block, contact Metav Werkzeuge for guidance and reliable supply from Emmerich. Technical data Article number: M319.020.1 GTIN: 4054469131252 Tariff number: 90173000 Facts Nominal size: 2 mm Weight: 0.007 kg Cross‑section: 30 x 9 mm Special features Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 1 FAQ What accuracy class does this reference block have? The gauge block is supplied in Grade 1 in accordance with DIN EN ISO 3650, making it suitable for precise reference measurements and routine laboratory checks. Is the 2 mm block suitable for stacking with other gauges? Yes, the 2 mm gauge block is intended for use as a stackable reference element in slip‑gauge sets and can be combined with other standard sizes for cumulative lengths. Which material is used and how does it affect longevity? Manufactured from hardened special steel, the block offers improved wear resistance and dimensional stability under normal workshop and laboratory conditions. How is the product identified for ordering and stock management? The reference is listed as M319.020.1 and bears GTIN 4054469131252 for straightforward ordering and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.5 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
This ceramic reference provides a compact, stable length standard with Grade 1 accuracy and a nominal size of 2.5 mm, combining material stability and traceable geometry for reliable calibration tasks; order the ceramic gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 2.5 mm, Grade 1 (DIN 861/1) — ceramic end gauge by Metav IndustryLine Ceramic gauge block 2.5 mm, Grade 1 DIN 861/1 serves as a precise length standard for calibration benches and inspection routines in precision workshops and metrology labs. Exceptional stability of ceramic material Grade 1 accuracy to DIN 861/1 Nominal length 2.5 mm for reference tasks Low weight 0.004 kg for easy handling Consistent baseline for dimensional checks and calibration The ceramic construction delivers a stable reference that resists wear and preserves geometry over repeated use, making it suitable as a baseline for routine verification. Specified as Grade 1 under DIN 861/1, the gauge block offers a reliable standard for comparative measurements and dimensional checks where reproducibility matters. Use as a short reference element in assembly controls, comparators or as part of a gauge set when small, high-quality standards are required. Material benefits that reduce measurement uncertainty A ceramic reference brings inherent advantages: thermal stability minimises length change with temperature fluctuations, and the hard, wear-resistant surface sustains contact integrity during repeated probing. These properties reduce typical sources of measurement drift and contribute to consistent results in quality-control loops. The compact nominal size supports fast positioning and integration into calibration stacks while the low mass limits inertial effects during handling. Practical use and workshop integration The compact format and minimal mass facilitate quick handling and safe storage on a dedicated bench block or in a protective tray. As a small-format reference, the gauge is particularly useful for calibration benches, inspection fixtures and for establishing short-span standards in production monitoring. The clear specification of 2.5 mm nominal length and conformity to DIN 861/1 aid traceability in documentation and inspection plans, supporting process control and audit requirements. For traceable Grade 1 measurement, contact Metav Werkzeuge in Emmerich to arrange supply and discuss technical fitment for this ceramic 2.5 mm gauge block Technical data Article number: M324.002.5 GTIN: 4054469142937 Material: Ceramic Nominal length: 2.5 mm Quality grade: 1 (DIN 861/1) Weight: 0.004 kg Tariff number: 90173000 Facts Nominal length: 2.5 mm Weight: 0.004 kg Quality grade: 1 GTIN: 4054469142937 Special features Ceramic material Conforms to DIN 861/1 Category: End gauge (reference block) Compact reference size for short-span calibration FAQ What does Grade 1 (DIN 861/1) indicate for this ceramic gauge block? Grade 1 under DIN 861/1 identifies a high-quality tolerance class suitable for precise reference work and routine calibration tasks using well-controlled measuring equipment. Is the ceramic gauge block supplied calibrated? The product data does not state a supplied calibration certificate; calibration status should be verified in the product listing or with the supplier before acceptance. What advantages does ceramic offer compared with steel gauge blocks? Ceramic provides enhanced wear resistance, reduced susceptibility to corrosion and lower thermal expansion, which together improve long-term dimensional stability for short reference lengths. How should the gauge block be handled and stored? Handle with clean, gloved hands and store in a dry, dust‑free tray; avoid sharp impacts and aggressive chemicals to preserve surface integrity and geometry. Can this gauge block be used in a set or combined with other lengths? Yes, the compact 2.5 mm reference is suited to combine in gauge stacks or as a short reference master within a set of end gauges for comparative measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.5 mm Gauge Block Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of proven reference quality and long-term stability by using a hardened Grade 1 gauge block manufactured to DIN EN ISO 3650; the compact 2.5 mm nominal dimension and stable cross-section ensure repeatable calibration steps and smooth inspection routines. Order the gauge block directly via Metav Werkzeuge or ask our consultants for application advice. Gauge block 2.5 mm — hardened special steel, DIN EN ISO 3650 Grade 1 Gauge block 2.5 mm for use as a traceable reference in calibration, inspection and precision assembly tasks Gauge block 2.5 mm, DIN EN ISO 3650, Grade 1 Hardened special steel for dimensional stability Compact cross-section 30×9 mm for ≤10 mm sizes Consistent reference accuracy for inspection and calibration The block delivers a stable reference dimension in accordance with DIN EN ISO 3650, enabling reliable comparative measurements in production control and metrology. Manufactured to Grade 1 tolerance, it provides a defined nominal length of 2.5 mm that serves as a benchmark for verifications and gauge stacking. The specification translates into predictable measurement behaviour, which simplifies setup tasks and reduces uncertainty in routine checks. Robust material and compact geometry for workshop use Built from hardened special steel, the component combines wear resistance with thermal robustness to preserve the reference surface under normal workshop conditions. The compact 30×9 mm cross-section (applicable for sizes up to 10 mm) supports secure handling and vertical stacking while keeping weight to a minimum (approx. 0.007 kg). This geometry assists technicians when assembling gauge stacks or conducting short-range master comparisons without excessive bulk. Proven conformity and practical procurement advantages Supplied to industry standard, the part fits into established calibration chains and inspection plans where traceable standards are required. The adherence to DIN EN ISO 3650 and the delivery as a single, hardened reference make this item suitable for laboratories and shop-floor quality points that prioritise repeatability. Metav’s role as a precision partner further ensures dependable availability and documentation for integration into quality management systems. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine gauge block into existing calibration procedures and to arrange procurement and delivery options. Technical data Article number: M319.025.1 GTIN: 4054469131276 Label: Endmaß 2,5 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Norm: DIN EN ISO 3650 Key figures Nominal size: 2.5 mm Weight: 0.007 kg Cross-section: up to 10 mm → 30×9 mm, from 10.1 mm → 35×9 mm Tariff number: 90173000 Special features Material: special steel, hardened Grade: 1 Category: Endmasse / Gauge block Story trigger: endmasse FAQ What tolerance class does this gauge block have? The gauge block conforms to Grade 1 tolerance under DIN EN ISO 3650, providing a stable reference for standard inspection and calibration tasks. Is the material suitable for regular workshop handling? Yes; the block is made from hardened special steel, which offers good wear resistance and dimensional stability for routine use in inspection and assembly areas. What is the nominal size and cross-section of the block? The nominal length is 2.5 mm; the cross-section for sizes up to 10 mm is 30×9 mm, designed for compact handling and stacking. Can this block be used as a calibration master in a laboratory? The DIN EN ISO 3650 conformity and Grade 1 classification make the block suitable as a reference in laboratory checks and for comparative calibrations within the corresponding accuracy class. Which SKU should be ordered for procurement records? Order using SKU M319.025.1; the same identifier appears as the article number and in the GTIN record for unambiguous procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.5 mm Plain Gauge Block Grade 0, DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Take advantage of Grade 0 accuracy, hardened special steel construction and a compact 2.5 mm nominal size to secure reproducible reference measurements in inspection and calibration tasks. Order the end gauge directly via Metav Werkzeuge or ask our consultants if additional technical details are required. Single end gauge 2.5 mm — Grade 0 gauge block (Metav IndustryLine) Single end gauge 2.5 mm for precision reference and verification tasks in metrology and quality control Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Nominal size 2.5 mm reference standard Lightweight 7 g for easy handling Traceable accuracy for inspection and setting tasks The DIN EN ISO 3650 specification ensures this end gauge meets internationally recognised tolerances for gauge blocks. As a Grade 0 reference piece, the element delivers a high level of dimensional certainty suitable for workshop calibration benches and production spot checks. The nominal dimension 2.5 mm is ideal for establishing short-range standards, verifying measuring instruments and cross-checking set-ups on micrometres or comparator stands. The measured tolerance class minimises uncertainty in routine quality control, enabling faster decision-making and fewer re-measurements. Robust material and compact form for everyday metrology Manufactured from hardened special steel, this gauge block resists surface wear and retains its geometry under normal workshop conditions. The compact cross-section (applicable up to 10 mm: 30 x 9 mm) gives a stable contact face and simplifies positioning in fixtures or between anvils. The small mass (approx. 7 g) and firm geometry reduce handling-induced error during short measurements, translating into efficient use on the shop floor and in inspection rooms. This combination of material and form supports repeatable results without the need for elaborate handling equipment. Practical use and care to extend service life As a single reference element, the gauge is straightforward to incorporate into daily routines for verification, machine set-up and instrument comparison. Routine care—cleaning contact faces with lint-free cloth and suitable solvent, storing in a dry case and avoiding hard impacts—preserves the calibrated surface over time. Where multiple reference sizes are required, keeping a set of matched end gauges simplifies traceability chains and reduces downtime for recalibration. The robust finish of the part makes maintenance simple while supporting long-term dimensional stability. Contact Metav Werkzeuge for a suitability check and reliable supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M319.025.0 GTIN: 4054469131269 Customs tariff number: 90173000 Facts Nominal size: 2.5 mm Weight: 0.007 kg Cross-section (≤10 mm): 30 x 9 mm Special features Material: hardened special steel Standard: DIN EN ISO 3650 Tolerance class: Grade 0 Category: End gauge / gauge block FAQ What level of accuracy does this gauge provide? The gauge conforms to DIN EN ISO 3650 in Grade 0, providing high-precision reference tolerance suitable for laboratory and workshop verification with the SKU M319.025.0. Can this gauge be used for calibration of micrometres and comparators? Yes — the hardened special steel and stable geometry make this 2.5 mm end gauge appropriate as a short-range reference for micrometre and comparator checks. How should the end gauge be stored to preserve accuracy? Store the element in a dry, clean environment, protect faces from contamination and impacts, and use lint-free cloths and appropriate solvents for cleaning to maintain dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.5/5.1/7.7/10.3/12.9/15.0/17.6/20.2/22.8/25.0 Gauge Block Set, Hardened Steel, DIN EN ISO 3650/1
A compact 10-piece reference set in hardened special steel and compliant with DIN EN ISO 3650/1 delivers reproducible micrometer verification and long-term stability; the lightweight set supports efficient in-house checks and secure transport in a protective case. Order the end gauge set directly via Metav Werkzeuge or ask the consultants for application advice. End gauge set M318.201 — 10-piece micrometer test set, DIN EN ISO 3650/1 (Metav IndustryLine) End gauge set M318.201 is a precision reference for verifying and calibrating micrometers in workshops and laboratories, certified to industry measuring standards. 10-piece set for micrometer testing Hardened special steel construction Compliant with DIN EN ISO 3650/1 Delivered in protective case Reliable reference for micrometer verification The set functions as a stable reference standard for routine verification and comparative checks of micrometers. Conformance with DIN EN ISO 3650/1 and DIN 863 ensures that the blocks match recognised dimensional tolerances, so calibration intervals and inspection protocols can be planned with confidence. By using proven gauge sizes in defined steps, measurement uncertainty is reduced and repeatability across shifts is improved, supporting quality control and traceable documentation. Robust material and handling for everyday use Manufactured from hardened special steel, the blocks resist wear and preserve measuring faces under regular use. The aged and hardened steel offers dimensional stability and a predictable surface hardness that minimises friction-related wear on micrometer anvils. At a total net weight of approximately 0.6 kg the set is compact and easy to handle, while the protective case provides secure transport and prevents surface damage during storage, keeping the reference condition intact between calibrations. Practical assortment that matches common workshop needs The kit comprises ten nominal sizes (in mm): 2.5, 5.1, 7.7, 10.3, 12.9, 15.0, 17.6, 20.2, 22.8 and 25.0, arranged to cover the most frequent verification steps for micrometers and small gauges. This progression allows fast comparative checks across the micrometer range without changing measuring strategy, reducing downtime in production and simplifying inspection tasks in the workshop or inspection lab. The set format supports efficient inventorying of reference standards and clear procedural workflows. Choose the Metav IndustryLine M318.201 for dependable micrometer verification and contact Metav Werkzeuge in Emmerich for ordering or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.201 GTIN: 4054469127972 Weight: 0.6 kg Pieces per set: 10 Sizes (mm): 2.5; 5.1; 7.7; 10.3; 12.9; 15.0; 17.6; 20.2; 22.8; 25.0 Material: Special steel, aged and hardened Standards: DIN 863; DIN EN ISO 3650/1 Tariff number: 90173000 Category: End gauge set Facts Set: 10 pieces Net weight: 0.6 kg GTIN: 4054469127972 Tariff number: 90173000 Special features Hardened special steel construction Conforms to DIN EN ISO 3650/1 and DIN 863 Supplied as a compact set for transport Designed for micrometer verification and comparative checks FAQ What sizes are included in the set? The set contains ten nominal sizes: 2.5, 5.1, 7.7, 10.3, 12.9, 15.0, 17.6, 20.2, 22.8 and 25.0 mm, enabling stepwise verification across common micrometer ranges with the Metav IndustryLine end gauge set M318.201. Is the material suitable for frequent use? Yes, the blocks are made from special steel, aged and hardened, providing wear resistance and stable contact faces for regular verification work with micrometers and inspection equipment. Which standards does this gauge set meet? The gauge set is manufactured to meet DIN EN ISO 3650/1 and DIN 863, ensuring dimensional conformity for laboratory and workshop calibration routines. Can the set be used for on-the-spot verification in production? Designed as a portable reference, the compact set and its protective case permit quick comparative checks and spot verification of micrometers on the shop floor while maintaining reference integrity. Is the M318.201 suitable as a workshop reference standard? Yes, the M318.201 by Metav IndustryLine is intended as a workshop and laboratory reference for micrometer verification, providing traceable sizes and robust construction for routine use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 mm Calibration Ring, 41.3 mm & 131.4 mm Gauge Blocks Set, Grade 2, Wooden Case - Metav IndustryLine
Benefit from a compact three-piece calibration kit made from hardened special steel, combining Grade 2 accuracy with two precision end standards and an adjustment ring for reliable workshop calibration; order through Metav Werkzeuge or consult the technical team for tailored advice. Calibration set for calipers M318.204 — Grade 2 end standards 41.3 mm & 131.4 mm with 20 mm setting ring (Metav IndustryLine) the Calibration set for calipers M318.204 provides two traceable reference end standards and a setting ring for routine verification and adjustment of measuring jaws in workshop and inspection environments Grade 2 calibration accuracy Includes 41.3 mm and 131.4 mm end standards 20 mm adjustment ring included Hardened special steel construction Precise reference standards that reduce uncertainty in routine checks The three-piece kit centres on two end standards (41.3 mm and 131.4 mm) plus a 20 mm setting ring, offering a straightforward basis for quick verification of caliper jaws. Manufactured from special steel, aged and hardened, the components deliver mechanical stability and wear resistance, which reduces the need for frequent replacement. Conformity with DIN EN ISO 3650 and VDI/VDE/DGQ 2618 ensures that dimensional checks performed with these standards are comparable and acceptable within typical workshop quality-control procedures. The compact format supports fast-change checks without extensive set-up time, improving overall throughput in calibration routines. Built for reproducible calibration and easy handling in the workshop Design choices focus on repeatability: the Grade 2 tolerance class provides a reliable compromise between precision and everyday robustness. The parts are weighted and finished to offer consistent seating when used for outside, inside and step verifications of calipers; the three-piece arrangement makes it simple to establish short, medium and reference points during an inspection sequence. Supplied components are suitable for routine verification cycles in maintenance departments and small metrology labs where traceable reference artefacts are required but laboratory-level artefacts would be excessive. Practical delivery and standards compliance for traceable results Supplied as a complete set in a protective transport case, the kit protects surfaces from accidental knocks and contamination during storage and transit. The set includes three pieces and carries the necessary identification for use in documentation and test records. Clear labelling and adherence to established norms support integration into existing quality systems and calibration protocols, while the robust material choice prolongs service life and keeps long-term total cost of ownership low compared with frequently replaced or softer reference pieces. For dependable routine calibration and straightforward integration into workshop quality processes, select the Metav IndustryLine M318.204 calibration set and contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.204 GTIN: 4054469128023 Tariff number: 90173000 Facts Nominal sizes: 41.3 mm; 131.4 mm; setting ring 20 mm Pieces per set: 3 Weight: 1 kg Special features Grade: 2 Material: Special steel, aged and hardened Standards: DIN EN ISO 3650; VDI/VDE/DGQ 2618 Supplied in protective case FAQ What is included in the calibration set? The kit contains two end standards (41.3 mm and 131.4 mm) and a 20 mm setting ring as a three-piece set (M318.204) for caliper verification. Which tolerance class does the set comply with? The components are manufactured to Grade 2 tolerances and conform to DIN EN ISO 3650 and VDI/VDE/DGQ 2618 standards. What material are the standards made from? The artefacts are produced from special steel, aged and hardened, chosen for dimensional stability and wear resistance. Is the kit suitable for workshop and small-laboratory use? Yes; the M318.204 set is aimed at workshop calibration and small metrology labs where Grade 2 reference standards provide a balance of precision and robustness. How is the set delivered? The calibration set is supplied as a three-piece kit in a protective case to prevent damage during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com