End gauges for precise length calibration
End gauges provide exact reference lengths for calibrating measurement instruments and ensuring consistent dimensional accuracy in metalworking and inspection processes. Used in production and laboratory settings, these end gauges—made from steel, ceramic or carbide—allow technicians to compensate for wear and thermal effects and maintain measurement traceability, especially when employed alongside parallel end gauges, cylinder gauges and calibration masters. Classes 0, 1 and 2 define practical tolerance levels for workshop, inspection-room and production use respectively, delivering the repeatable precision required for machining and quality control.
14.5 mm End Gauge, DIN EN ISO 3650 Grade 1, Hardened Special Steel - Metav IndustryLine
A compact, Grade 1 reference that combines DIN EN ISO 3650 conformity with durable hardened special steel construction for repeatable dimensional verification; the precise 14.5 mm nominal size and robust 35 x 9 mm cross-section support reliable handling and long service life. Order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge block 14.5 mm — Grade 1 fixed-length reference, DIN EN ISO 3650 (Metav IndustryLine) The gauge block 14.5 mm is a fixed-length reference for industrial metrology, designed for dimensional checks and calibration tasks in quality control environments Grade 1 accuracy to DIN EN ISO 3650 Hardened special steel construction Cross-section 35 x 9 mm for stable handling Precision that secures quality control The block offers Grade 1 conformity to DIN EN ISO 3650, providing a dependable reference for routine verification and inspection tasks. As a fixed-length standard with a nominal size of 14.5 mm, it supports fast comparative checks and reduces throughput variability. The standardised dimension aids traceable measurement chains and helps to maintain process reliability in workshop and production‑level quality assurance. Durable build for repeatable results Manufactured from hardened special steel, this reference is designed for resistance to wear and mechanical stress. The larger 35 x 9 mm cross-section, applied for sizes above 10.1 mm, improves grip and reduces the risk of bending during handling, which enhances repeatability of readings. The compact mass and form factor also simplify fixturing in inspection setups and make storage straightforward. Practical handling and integration into workflows With a lightweight construction (approx. 0.012 kg) and compact footprint, the reference is easy to transport within a metrology bench environment and straightforward to store alongside other gauges. The product’s clear technical specification facilitates planning of calibration intervals and integration into measurement routines. The solid construction reduces maintenance needs and supports consistent measurement results over extended service life. Choose the Metav IndustryLine Grade 1 gauge block for reliable reference standards and contact Metav Werkzeuge in Emmerich for ordering or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M319.145.1 GTIN: 4054469131757 Tariff number: 90173000 Facts Nominal size: 14.5 mm Weight: 0.012 kg Cross-section: 35 x 9 mm (applies for >10.1 mm) Special features Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 1 FAQ What level of accuracy does this gauge provide? The gauge block 14.5 mm (Metav IndustryLine, SKU M319.145.1) is supplied to Grade 1 specification according to DIN EN ISO 3650, making it suitable for routine verification and quality‑control tasks that require reliable dimensional references. Can this reference be used on the shop floor for regular checks? Yes, the hardened special steel construction and the stable 35 x 9 mm cross‑section make the block well suited for shop‑floor use where repeatable comparative measurements are required. What are the handling and storage considerations? Due to its compact size and low mass, the block is easy to handle and store; using dedicated protective storage and clean handling practices will prolong its service life and preserve measurement integrity. Is the material specified for resistance to wear? The reference is made from hardened special steel, which provides improved wear resistance and mechanical stability for repeated use in inspection workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.5 mm Gauge Block Single-End, Grade 0, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of Grade 0 conformity and a hardened special steel body combined with the compact 14.5 mm nominal length for a reliable length standard in calibration and inspection workflows; order the gauge block directly via Metav Werkzeuge or contact our consultants for application advice. Gauge block 14.5 mm (DIN EN ISO 3650) – Grade 0 by Metav IndustryLine A gauge block 14.5 mm designed as a high-precision length standard for calibration laboratories and workshop quality control. Grade 0 accuracy (DIN EN ISO 3650) Hardened special steel construction Compact 14.5 mm nominal length Reliable standard for precision measurement The product is manufactured to DIN EN ISO 3650 and delivered with the tight tolerances associated with Grade 0, which ensures repeatable length references for calibration and comparative measurement. The 14.5 mm nominal size is a precise intermediate value useful when building stacks for non-standard lengths; its conformity to international standard supports traceable measurements and reduces uncertainty in verification routines. By relying on a standardised length block, inspection processes benefit from consistent reference points and simplified documentation. Compact design that integrates into workshop routines A small mass and compact footprint make this block easy to handle during set-up and stacking operations; the specified cross-section — 30×9 mm for sizes up to 10 mm and 35×9 mm where applicable — provides stable contact surfaces and reduces tilting when combined with other blocks. The hardened construction resists wear in regular use, which lowers the frequency of replacement and keeps measurement drift to a minimum. As a result, routine quality checks and comparator calibrations can be performed faster and with greater confidence in the reference dimension. Built for durability and seamless standardisation Manufactured from hardened special steel, the block offers long-term dimensional stability under normal storage and handling conditions, helping to preserve calibration intervals and reduce total cost of ownership. The clear product identification (SKU and GTIN) allows straightforward inventory management and integration into quality-control systems. Compatibility with established stacking and wringing procedures ensures the block functions reliably within existing gauge block sets and laboratory equipment, supporting efficient metrology workflows. Request the Metav IndustryLine gauge block via Metav Werkzeuge in Emmerich for assured conformity and practical application guidance; email info@metav-werkzeuge.com or call +49 2822 7131930 for bespoke advice Technical data Article number: M319.145.0 GTIN: 4054469131740 Nominal length: 14.5 mm Standard: DIN EN ISO 3650 Grade: 0 Facts Mass: 0.012 kg Tariff number: 90173000 Cross-section: 30×9 mm (≤10 mm), 35×9 mm (>10.1 mm) Special features Material: hardened special steel Category: Gauge block (end mass) Brand: Metav IndustryLine FAQ What accuracy class does the block meet? The block meets Grade 0 accuracy in accordance with DIN EN ISO 3650, providing a high level of dimensional fidelity suitable for calibration and inspection work. What material is used for the block? This gauge block is made from hardened special steel, selected for wear resistance and long-term dimensional stability under normal laboratory conditions. How is the block typically used in measurement routines? The 14.5 mm nominal length is used as an individual length standard and combined in stacks to achieve non-standard reference lengths during comparative measurements and comparator calibration. Are the cross-section dimensions specified? Yes; the block uses a cross-section of 30×9 mm for sizes up to 10 mm and 35×9 mm for sizes above 10.1 mm, giving stable support for wringing and stacking operations. Which identification helps with inventory and traceability? The product is listed under SKU M319.145.0 and GTIN 4054469131740, facilitating ordering, stock control and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.5mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the proven combination of Grade 1 accuracy and the dimensional stability of a ceramic reference to secure reproducible measurements and fast set‑up times in the workshop. Order the ceramic gauge block directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 14.5 mm, Grade 1 (DIN 861/1) — Metav IndustryLine Ceramic gauge block 14.5 mm, Grade 1 (DIN 861/1) serves as a compact, stable reference for calibration, setting and comparison tasks in metrology and quality control. Grade 1 accuracy to DIN 861/1 Ceramic body for dimensional stability Nominal size 14.5 mm exact Assured accuracy for reference and calibration work The Grade 1 classification to DIN 861/1 denotes a high level of metrological precision suitable for laboratory and workshop reference tasks. As a single gauge block, the unit provides a defined nominal length of 14.5 mm, making it suitable for use as a reference during setting of measuring instruments, fixture set‑up and comparative checks. The conformity to the DIN class gives procurement and quality teams a clear, rational basis for selection: compliance with an established standard reduces uncertainty in traceable measurement chains and streamlines inspection procedures. Material choice and practical handling in routine use Constructed from ceramic, the block is inherently resistant to many environmental influences that affect metallic gauges; this material choice supports long‑term dimensional stability under normal workshop conditions. The item is a lightweight reference, weighing 0.026 kg, which simplifies handling during repetitive setting or inspection tasks and reduces wear on support tooling. The compact format and stable body allow straightforward integration into existing gauge block sets or as an individual reference for specific tooling or fixture verification. Efficient workflow integration and inventory traceability The compact reference dimension and standardised grade make the block easy to incorporate into work instructions and measurement routines, reducing setup times and the risk of manual error. Identifiers such as the SKU and GTIN facilitate inventory control and unambiguous ordering; the clear technical specification helps planning for quality audits and calibration cycles. For operations seeking predictable repeatability, the ceramic gauge block offers a rational solution that supports consistent measurements and a more efficient inspection workflow. For reliable reference measurements and procurement support, contact Metav Werkzeuge to discuss the Ceramic gauge block 14.5 mm (Grade 1) and receive tailored advice from our team — Metav Werkzeuge in Emmerich maintains stock and technical consultancy at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M324.014.5 GTIN: 4054469143170 Category: End gauges Material: Ceramic Nominal dimension: 14.5 mm Tolerance class: Grade 1 (DIN 861/1) Weight: 0.026 kg Customs tariff number: 90173000 Facts Nominal dimension: 14.5 mm Weight: 0.026 kg Customs tariff: 90173000 Special features Material: Ceramic Accuracy class: Grade 1 (DIN 861/1) Category: End gauges SKU: M324.014.5 FAQ What level of accuracy does this gauge block offer? The ceramic gauge block is specified as Grade 1 according to DIN 861/1; this classification indicates a high level of metrological accuracy appropriate for reference and calibration tasks. Can the ceramic block be used in place of metal gauge blocks? Yes, the ceramic gauge block 14.5 mm is suitable as a stable reference; its material properties differ from metal but the defined nominal dimension and Grade 1 tolerance make it appropriate for many comparative and setting operations. How should the ceramic gauge block be stored to preserve accuracy? Store the block in a clean, dry environment and avoid abrasive contact with harder materials; standard protective storage for gauges prevents contaminants and supports long‑term dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic construction, Grade 1 accuracy and compact 15 mm nominal length for reliable reference measurements; order directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic gauge block 15 mm (Grade 1, DIN 861/1) — Metav IndustryLine The Ceramic gauge block 15 mm (Grade 1 DIN 861/1) serves as a precision reference standard for calibration and dimensional checks in toolrooms, inspection labs and production settings. Grade 1 accuracy to DIN 861/1 Ceramic material for thermal stability Compact 15 mm nominal reference length Precision where it matters: stable Grade 1 reference The ceramic gauge block is manufactured to Grade 1 tolerance under DIN 861/1, providing a dependable nominal length of 15 mm for comparative measurements and calibrations. Grade 1 indicates tight geometric and dimensional control suitable for workshop and laboratory reference tasks; this classification supports consistent repeatability when used as a baseline for gauge sets or verification routines. The block’s conformity to the DIN standard gives a clear, technical basis for specification sheets and quality documentation. Material benefits: thermal and wear advantages of ceramic Made from ceramic, the measuring standard offers a low thermal expansion coefficient and excellent wear resistance, which reduces length changes with temperature and prolonged use. These material properties translate into more stable readings during short-term measurements and less performance drift over repeated cycles. The modest mass (approximately 0.027 kg) and compact geometry make the block simple to handle while preserving stiffness and surface integrity required for reliable contact with measuring instruments. Practical use: integration into calibration and inspection workflows The nominal 15 mm gauge block functions as a primary reference for comparative checks, setting up length standards, and verifying callipers, micrometers and gauge sets. As a slip gauge or master reference, it pairs effectively with other standards to build step blocks or measure against master faces. Handling recommendations include cleaning contact faces before use and avoiding harsh impacts to preserve the finished surfaces; correct storage in a dry, stable environment prevents contamination and maintains long-term accuracy. Application scope and professional assurance Ideal for precision shops, metrology labs and production inspection benches, this compact gauge block supports repeatable measurements on small components and subassemblies. The product’s engineering focus addresses the rational need for traceable, stable references in measurement chains. Combined with Metav’s technical portfolio and quality assurance practices, the block is a practical element in workflows that demand reproducible dimensional control and straightforward integration with existing measurement equipment. For stable reference measurements, choose the Metav IndustryLine ceramic gauge block 15 mm (Grade 1) and contact Metav Werkzeuge for tailored advice or technical clarification at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M324.015 GTIN: 4054469143187 Customs tariff number: 90173000 Facts Nominal size: 15 mm Grade: 1 (DIN 861/1) Weight: 0.027 kg ECLASS: 21170108 Special features Material: Ceramic Category: Gauge blocks / End measures Label: Ceramic gauge block 15 mm, Grade 1 DIN 861/1 FAQ What accuracy class does this gauge block meet? The ceramic gauge block meets Grade 1 accuracy according to DIN 861/1, providing a stable 15 mm reference for workshop and laboratory use. Is the ceramic material suitable for repeated comparative measurements? Yes, the ceramic construction offers good wear resistance and low thermal expansion, making the 15 mm gauge block appropriate for repeated comparative tasks over time. How should the gauge block be handled and stored to preserve accuracy? Handle the gauge block carefully to avoid impacts, clean contact faces before measurement, and store in a dry, stable environment to maintain the reference length and surface condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15 mm End Gauge Single End, DIN EN ISO 3650 Grade 0, Hardened Special Steel - Metav IndustryLine
Combining DIN EN ISO 3650 Grade 0 accuracy with a hardened special‑steel construction and a compact 35 x 9 mm cross‑section delivers a stable, traceable reference for calibration and dimensional inspection; order directly via Metav Werkzeuge or consult our advisors for application support. Single gauge block 15 mm (DIN EN ISO 3650) — Grade 0, hardened special steel The Single gauge block 15 mm is a precision reference element for calibration and dimensional inspection in metrology laboratories and workshop quality control. DIN EN ISO 3650 Grade 0 accuracy Hardened special‑steel construction 15 mm nominal size, traceable standard Compact 35 x 9 mm cross‑section Confidence in the measuring chain thanks to class‑based precision The block is manufactured to DIN EN ISO 3650 and specified as Grade 0, which defines a higher accuracy class within the international standard. As a calibrated reference element, it provides a reproducible length that stabilises measurement chains and supports quality assurance workflows. By using a standardised reference, uncertainty budgets shrink and inspection results become comparable across shifts and locations, enabling faster decisions in production and inspection. Durable form factor that eases handling and storage Constructed from hardened special steel, the gauge block combines dimensional stability with resistance to wear. The larger cross‑section relevant for this nominal size is 35 x 9 mm, offering a balance between rigidity and compactness that aids manual handling and stacking. With a mass of approximately 0.012 kg the block is easy to position yet stable in use; the compact geometry reduces the risk of edge damage during routine handling and makes the block suitable for both bench and portable verification tasks. Practical integration for calibration and shop‑floor use As a single reference element, the block works well for setting master gauges, verifying calipers and micrometres or checking fixture reference points. The clear identification via SKU and GTIN supports procurement and traceability in quality systems, while the standard conformity simplifies documentation. For users seeking reliable, long‑term references, the combination of standard compliance and robust material reduces adjustment intervals and contributes to consistent production quality. For procurement or technical advice on selecting the right reference standards, contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich Technical data SKU: M319.150.0 GTIN: 4054469131764 Nominal size: 15 mm Standard: DIN EN ISO 3650 Grade: 0 Facts Weight: 0.012 kg Cross‑section: 35 x 9 mm Tariff code: 90173000 Special features Material: special steel, hardened Category: gauge block / end measure Intended use: calibration and dimensional inspection Compact, stackable form FAQ What tolerance class is this gauge block manufactured to? This single gauge block is produced to Grade 0 under DIN EN ISO 3650, offering a high accuracy class for reference and inspection tasks. Is the material corrosion‑resistant and suitable for regular workshop use? The block is made from hardened special steel, which provides wear resistance and dimensional stability; routine care such as cleaning and light oiling is recommended for long service life. Can this 15 mm block be used to verify calipers and micrometres? Yes, the 15 mm reference length is suitable for checking and setting calipers and micrometres as part of regular verification and calibration procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15 mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a Grade 1 tolerance standard and hardened special steel construction for dependable dimensional reference checks; the compact 15 mm size and clear product identification via SKU simplify inventory and traceability—order the gauge directly via Metav Werkzeuge or consult our team for inventory and technical advice. End gauge 15 mm — Grade 1, DIN EN ISO 3650 (Metav IndustryLine) The End gauge 15 mm is a precision reference gauge designed for dimensional verification and workshop inspection tasks in metrology and quality control environments Grade 1 accuracy to DIN EN ISO 3650 Hardened special-steel construction Compact 15 mm nominal size Clear identification with SKU and GTIN Precision and conformity for reliable checks Manufactured to DIN EN ISO 3650 and specified as Grade 1, this compact reference element serves as a stable standard for verification tasks where reproducible dimensional conformity is required. Its designation as a Grade 1 gauge signals higher fidelity than routine workshop checks, supporting consistent pass/fail comparisons and the calibration of bench instruments. Using a standardised gauge reduces measurement uncertainty and streamlines inspection procedures by providing an unequivocal reference point for quality records and dimensional audits. Robust construction for daily workshop use The gauge is produced from hardened special steel, offering elevated surface hardness and wear resistance that preserve the functional dimensions over repeated use. For the 15 mm nominal size the applicable cross-section is 35 x 9 mm, delivering a compact beam with sufficient stiffness to resist bending during manual handling. At approximately 0.012 kg, the piece is easy to position and handle while still providing tactile stability when used to check micrometers, calipers or go/no‑go fixtures. These material and geometric choices combine to lower maintenance needs and extend service life in routine inspection cycles. Clear identification and straightforward integration Product identification is simplified for workshop logistics: SKU M319.150.1 and GTIN 4054469131771 are assigned for inventory control and procurement systems. The nominal size of 15 mm makes the item well suited as a periodic check standard for small-bore gauges and handheld measuring instruments. Supplied as a single, ready-to-use gauge, it integrates into existing inspection benches without additional adjustment, helping to maintain throughput in production or quality departments while supporting traceable documentation of measurement equipment status. Contact Metav Werkzeuge today for stock availability, specification support or to confirm suitability for a specific inspection task—our Emmerich facility combines warehouse supply with a quality filter for reliable delivery and expert advice. Technical Data SKU: M319.150.1 GTIN: 4054469131771 Label: Endmaß 15 mm, DIN ISO 3650, Güte 1 DIN ISO 3650 Numerical data Nominal size: 15 mm Weight: 0.012 kg Cross-section: 35 x 9 mm (applies for >10.1 mm) Commodity code: 90173000 Materials & features Material: Spezialstahl, gehärtet Tolerance class: Grade 1 Standard: DIN EN ISO 3650 Category: End gauges / Measuring instruments FAQ What is the intended use of this end gauge? The end gauge is intended as a dimensional reference for verification and inspection tasks; the End gauge 15 mm is suitable for checking small instruments and validating calibration setups in workshop and lab environments. Does this gauge comply with international standards? Yes, the gauge is manufactured to DIN EN ISO 3650 and specified as Grade 1, ensuring conformity with the relevant standardised tolerance classes. What material is the gauge made from and how durable is it? The piece is made from hardened special steel, offering good wear resistance and dimensional stability for frequent use. How is the product identified for ordering and inventory? Identification is provided via SKU M319.150.1 and GTIN 4054469131771, which supports procurement, stock control and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.5 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Benefit from the combination of Grade 1 accuracy to DIN 861/1, a ceramic construction and a compact 15.5 mm nominal size for reliable reference checks; order the Ceramic end gauge 15.5 mm directly via Metav Werkzeuge or consult their specialists if application advice is required. Ceramic end gauge 15.5 mm — Grade 1 DIN 861/1, Metav IndustryLine The Ceramic end gauge 15.5 mm is a compact, wear‑resistant reference standard designed for precision length checks in inspection, calibration and production control environments. Grade 1 accuracy to DIN 861/1 Wear‑resistant ceramic construction Nominal size 15.5 mm for precision checks Lightweight — 0.028 kg for easy handling Precision where routine checks meet traceable results As a Grade 1 reference, the gauge provides a clearly defined tolerance class under DIN 861/1, making it suitable for routine verification of micrometres, calipers and inspection fixtures. The small 15.5 mm nominal dimension is ideal for short-span reference tasks where reproducibility matters: the compact format reduces handling error and speeds up comparative checks. This combination of compactness and classification supports efficient quality control workflows and consistent measurement output. Durable material for long-term stability The ceramic construction offers inherent hardness and dimensional stability that help preserve the reference surface over extended use. Ceramic end standards are valued for their resistance to wear and chemical attack compared with softer materials, so the gauge maintains its defined size for longer intervals between service events. Long service life reduces the need for frequent replacement, supporting lower life‑cycle costs while keeping inspection accuracy high. Practical handling tailored to workshop routines With a mass of only 0.028 kg, the gauge is simple to position during bench checks and fast comparative inspections. The compact design permits quick integration into existing inspection routines and aids rapid reference verification on the shop floor or in the metrology bench. Supplied as a single, dedicated datum of nominal 15.5 mm, it fits naturally into sets of end gauges and complements caliper and micrometre checks without adding bulk to the tool kit. Discuss the Metav IndustryLine ceramic end gauge with Metav Werkzeuge to integrate Grade 1 reference checks into inspection routines and specify any additional calibration requirements Technical Data Article number: M324.015.5 GTIN: 4054469143194 Category: End gauges Facts Nominal size: 15.5 mm Weight: 0.028 kg Accuracy grade: 1 (DIN 861/1) Tariff number: 90173000 Materials / Special features Material: Ceramic Manufacturer: Metav IndustryLine Label: Ceramic end gauge 15.5 mm, Grade 1 DIN 861/1 FAQ What does Grade 1 according to DIN 861/1 imply for measurement use? Grade 1 under DIN 861/1 denotes a defined tolerance class for end gauges; the Ceramic end gauge 15.5 mm (SKU M324.015.5) is manufactured and verified to meet that tolerance level for repeatable reference checks. Is ceramic suitable for everyday workshop inspection tasks? Yes, ceramic provides high surface hardness and good dimensional stability; the Metav IndustryLine ceramic end gauge 15.5 mm is therefore appropriate for routine comparative checks where wear resistance supports long service life. Can this end gauge be used to check micrometres and calipers? The design and tolerance rating make the gauge suitable as a reference for verifying micrometres and calipers; the 15.5 mm nominal size is commonly used for short-span verification tasks. How should the ceramic gauge be stored to preserve accuracy? Store the Ceramic end gauge 15.5 mm in a clean, dry environment and avoid mechanical shocks or abrasive contact with harder surfaces; gentle handling and a dedicated storage compartment extend the reference surface life. What identifiers and manufacturer details are associated with this product? Article identifiers: SKU M324.015.5, GTIN 4054469143194; Manufacturer: Metav IndustryLine (see manufacturer information below) Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.5 mm Gauge Block Single-End Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of Grade 0 conformity and the wear‑resistant hardened special steel construction for a durable, traceable reference standard that supports repeatable calibration results; order the gauge block directly via Metav Werkzeuge or consult our specialists for further technical information. Metav IndustryLine single gauge block 15.5 mm, Grade 0 (DIN EN ISO 3650) The Metav IndustryLine single gauge block 15.5 mm is a precision reference block intended for laboratory and workshop calibration tasks, offering traceable length standards for measurement chains and instrument verification. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Nominal length 15.5 mm for fine calibration Compact weight 0.016 kg for easy handling Consistent accuracy for calibration and quality control The block delivers Grade 0 accuracy according to DIN EN ISO 3650, making it a reliable reference for calibration labs and quality departments. Grade 0 denotes tight tolerance bands that permit its use as a comparative standard when verifying micrometers, callipers and gauge sets. The nominal length of 15.5 mm is ideal as a mid‑range reference for setting up instruments and checking machine zeroes, providing a tangible standard that supports reproducible measurement routines and reduces cumulative error in inspection chains. Robust construction that supports long service life Manufactured from hardened special steel, the reference block resists wear and surface damage during regular handling, which preserves dimensional integrity over repeated use. The compact design and low mass (approx. 0.016 kg) make the block easy to position in tight fixtures and for single‑person handling, while the machined cross‑section maintains parallelism and flatness where it matters. These material and geometric choices reduce the frequency of reconditioning and ensure a stable reference for routine verification tasks in both workshop and controlled environments. Practical integration into inspection workflows As a single reference element, this block complements sets and standalone standards, enabling fast spot checks and integration into traceable measurement procedures. The block’s conformity to recognised standards simplifies documentation of inspection results and supports internal quality systems. When paired with a calibrated set or used to set instrument zeroes, the block contributes to improved process control and fewer reworks. For procurement and supply chain reliability, Metav IndustryLine combines market availability with the assurance expected by professional metrology teams. For calibration tasks that require certified accuracy, order the Metav IndustryLine single gauge block through Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com for tailored recommendations and delivery details Technical data Article number: M319.155.0 GTIN: 4054469131788 Tariff number: 90173000 Category: Endmasse Facts Nominal size: 15.5 mm Weight: 0.016 kg Cross-section: up to 10 mm: 30×9 mm; from 10.1 mm: 35×9 mm Grade: 0 Special features Material: hardened special steel Standard: DIN EN ISO 3650 Product type: single gauge block Label: single gauge block 15.5 mm, Grade 0 (DIN EN ISO 3650) FAQ What tolerance class does this gauge block conform to? The Metav IndustryLine single gauge block 15.5 mm conforms to Grade 0 tolerance as specified in DIN EN ISO 3650, providing a high‑precision reference for comparative measurements. Is the block suitable for workshop use or only for laboratories? The hardened special steel construction makes the block durable enough for frequent workshop use while remaining precise enough for laboratory checks; the Metav IndustryLine reference block is intended for both environments. Can this block be used to verify micrometers and callipers? Yes, the 15.5 mm single gauge block is suitable as a calibration standard for micrometers, callipers and as a reference within gauge block sets when conducting instrument verification. How should the reference block be handled to preserve accuracy? Handle the Metav IndustryLine block with clean, dry gloves or tweezers, avoid impacts and store it in a dry, temperature‑stable environment when not in use to maintain surface condition and dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.5mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a DIN EN ISO 3650 Grade 1 reference that combines hardened special steel construction with a compact 15.5 mm nominal size for reliable calibration and repeatable measurements; order via Metav Werkzeuge or ask the consultants for application advice. 15.5 mm gauge block (DIN EN ISO 3650, Grade 1) — Metav IndustryLine The 15.5 mm gauge block is a compact precision reference element designed for calibration, dimensional checks and laboratory reference use in industrial metrology. DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Nominal size 15.5 mm for precision calibration Consistent reference standard for calibration and quality control A Grade 1 block certified to DIN EN ISO 3650 provides a stable reference for reference‑grade measurement chains and routine verification. The Grade 1 specification is intended for shops and inspection benches where a high level of dimensional trust is required; this delivers a measurable improvement in process control and reduces downstream rework. As a compact reference element, the block offers an immediate, objective basis for comparative checks and helps to maintain instrument consistency across production batches. Robust construction for long service life and repeatability Built from hardened special steel, the gauge block resists wear and preserves the measuring face geometry under normal workshop handling, enabling repeatable measurements over time. The cross‑section applied to sizes above 10.1 mm is 35 x 9 mm, which balances stiffness with manageability; the item listed has a nominal dimension of 15.5 mm and a mass of 0.016 kg, making it easy to handle while remaining stable during use. The hardening treatment reduces surface damage during mounting or stacking and supports consistent performance in comparative and calibration tasks. Practical integration into measurement workflows The compact format and standard conformity simplify integration into calibration sequences and stack assemblies for setting up gauges or verifying instruments. As a standard reference, the block is suited to laboratory benches, toolrooms and quality departments that require a traceable, shop‑ready artefact for dimensional control. Metav IndustryLine's distribution ensures dependable availability and a European quality filter at the Emmerich site, which supports uninterrupted production workflows and long‑term supply reliability. For procurement, traceability details or assistance selecting complementary gauge blocks, contact Metav Werkzeuge for tailored advice and order facilitation. Technical data Article number: M319.155.1 GTIN: 4054469131795 Category: Gauge blocks Facts Nominal size: 15.5 mm Weight: 0.016 kg Tariff number: 90173000 eClass: 21170108 Cross-section (applicable): 35 x 9 mm Special features Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 1 Label: Endmaß 15,5 mm, DIN ISO 3650, Güte 1 Category path: Messgeräte → Endmasse FAQ What level of accuracy does this block provide? The block complies with DIN EN ISO 3650 Grade 1 tolerances, making it suitable as a high‑quality workshop reference for dimensional checks. Is this gauge block suitable for calibration and stacking with other blocks? Yes. The 15.5 mm gauge block from Metav IndustryLine is manufactured for use in stack assemblies and comparative calibration routines where Grade 1 conformity is required. What is the block made from and how durable is it? The block is manufactured from hardened special steel, providing wear resistance and stable measuring faces for repeated use in inspection and calibration tasks. Which cross‑section applies to this size and why does it matter? For sizes above 10.1 mm the cross‑section is 35 x 9 mm; this dimension improves stiffness and handling, which helps to keep measurements reproducible across multiple operations. How should the block be stored and handled to maintain accuracy? Handle with clean hands or gloves, avoid shocks and contamination, and store in a dry, dust‑free environment to preserve the hardened surfaces and dimensional integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.62/15.75/15.87/16.00 mm Plane-Glass Set For Micrometer Calibration 0.1 µm Accuracy - Metav IndustryLine
Take advantage of a compact verification solution that combines high flatness accuracy and matched thicknesses for consistent micrometre checks; the set of four precision optical flats supports reproducible results and streamlined workshop calibration. Order directly via Metav Werkzeuge or consult the Metav team for application advice and supply options. Optical Flat Set M318.225 – Verification standard for micrometres, 0.1 µm flatness The Optical Flat Set M318.225 is a precision reference set intended for verification of 0–25 mm micrometres, supplying ultra-flat surfaces for calibration tasks and routine inspection in production and quality departments. 0.1 µm flatness accuracy Four precision plates 15.62–16.00 mm Designed for 0–25 mm micrometre checks Consistent calibration with measurable accuracy The set provides a flatness specification of 0.1 µm, making it suitable as a visual and tactile reference when verifying the anvil surfaces of small-capacity micrometres. Supplied as four plates, each plate has a matched nominal thickness (15.62, 15.75, 15.87 and 16.00 mm) so that measurement set-ups can be adapted to different anvil clearances without modifying the instrument under test. The closely controlled parallelism 0.006 mm ensures that measurements taken across a plate remain consistent; this reduces the need for repeat adjustments and supports faster in-process checks. Designed for shop-floor repeatability and ease of use Manufactured for routine inspection, these reference surfaces combine ease of handling with workshop durability. The compact dimensions (diameter 30 mm) and a total set mass of 0.5 kg make the set simple to store and deploy at the measurement station. Using matched plate thicknesses reduces handling time because the right reference can be selected quickly for the target micrometre range. For quality teams, the direct benefit is fewer measurement interruptions and a clearer pass/fail decision path during calibration or incoming inspection. Practical applications and technical advantages This optical flat set is intended primarily for verification of small micrometres and other contact measuring tools that cover the 0–25 mm range; the plates act as stable references for detecting wear or cumulative error in instrument anvils. In production environments, the set serves as a fast diagnostic aid: by comparing the instrument’s reading against the known plate thicknesses, faults and drift can be identified without lengthy dismantling. The compact format and clear nominal values support straightforward documentation of routine checks and help maintain traceability in quality records. For reliable verification with Metav IndustryLine, contact Metav Werkzeuge in Emmerich to secure the M318.225 optical flat set and receive tailored advice for integration into calibration routines. Technical data Article number: M318.225 GTIN: 4054469184265 Manufacturer: Metav IndustryLine Flatness: 0.1 µm Parallelism: 0.006 mm Plate thicknesses: 15.62 / 15.75 / 15.87 / 16.00 mm Diameter: 30 mm Pieces per set: 4 Weight: 0.5 kg Category: Parallelunterlagen eClass: 21170126 Set format: four matched optical flats Application: Verification of micrometres (0–25 mm) Use case: Workshop calibration and routine inspection Packaging: set supplied (no on-site demonstration offered) FAQ What is the purpose of the optical flat set? The optical flat set M318.225 is designed as a reference standard for verification of 0–25 mm micrometres, supplying ultra-flat surfaces to assess instrument accuracy and detect anvil wear. How are the plates used in a calibration procedure? Each plate in the set represents a known thickness; by placing a plate between the micrometre anvils and comparing the instrument reading with the plate nominal value, deviations can be identified and recorded for corrective action. Is the M318.225 suitable for production environments? Yes, the compact design, matched plate thicknesses and 0.1 µm flatness make the set suitable for routine shop-floor checks and quick diagnostic tasks in production and quality departments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Gauge Block Set Grade 0 DIN EN ISO 3650 Hardened Special Steel - Metav IndustryLine
Benefit from industrial-grade repeatability and conformity: Grade 0 accuracy according to DIN EN ISO 3650 together with a hardened special steel construction provides a stable 150 mm reference for calibration and inspection tasks. Order the end measure directly via Metav Werkzeuge or consult their advisors for specification and availability. End measure 150 mm — Grade 0 precision end gauge (DIN EN ISO 3650) by Metav IndustryLine The End measure 150 mm is a precision end gauge intended for laboratory calibration, incoming inspection and production acceptance testing in industrial metrology. Grade 0 accuracy to DIN EN ISO 3650 Hardened special steel construction Nominal 150 mm size for lab and workshop Cross-section 35x9 mm for rigid stability Precise conformity for dependable measurement outcomes This measuring standard meets DIN EN ISO 3650 and carries the Grade 0 accuracy class, making it suitable where narrow tolerances and reproducible results are required. As a fixed-length reference, the 150 mm nominal size provides a stable baseline for gauge comparisons and verification tasks. The specification reduces uncertainty in everyday calibration work and supports efficient decision-making in quality control by delivering an unambiguous reference length for repeat checks and fixture set-ups. Robust construction for long-term dimensional stability Manufactured from hardened special steel, the gauge is designed to resist wear and to maintain its geometry under regular use. The compact 35x9 mm cross-section balances stiffness with manageable handling, helping to avoid bending or deformation during placement. The relatively low mass supports secure seating on flat references and minimises dynamic effects during transfer measurements, while the finish and hardness help to preserve contact faces and extend service life in workshop and lab environments. Seamless integration into inspection routines and traceable workflows As a Grade 0 end gauge from Metav IndustryLine, this measure fits naturally into traceable inspection chains and calibration schedules. Its nominal size and standardised tolerance make it straightforward to include in master sets or to use as a datum for comparative gauging. For organisations aiming to streamline quality processes, the gauge provides a reliable mechanical reference that complements digital systems and manual verification alike, supporting process stability across production and metrology departments. For purchase and technical confirmation of delivery options, contact Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — to arrange supply of the Metav IndustryLine end measure (SKU M320.150.0) with advice on handling and storage. Technical Data Article number: M320.150.0 GTIN: 4054469132389 SKU: M320.150.0 Category: End measures Core measurements Nominal size: 150 mm Weight: 0.5 kg Cross-section: 35x9 mm Tariff number: 90173000 Materials & features Material: Special steel, hardened Standard: DIN EN ISO 3650 Accuracy class: Grade 0 Category: End measure FAQ What level of accuracy does this gauge provide? The End measure 150 mm from Metav IndustryLine is manufactured to Grade 0 and conforms to DIN EN ISO 3650, offering the tight tolerances expected for precision reference gauges (SKU M320.150.0). Is this end measure suitable for workshop and laboratory use? Yes — the hardened special steel construction and compact 35x9 mm cross-section make the gauge suitable for both laboratory calibration benches and routine workshop inspection tasks where a stable 150 mm reference is required. How should the gauge be handled and stored to maintain accuracy? Handle the Metav IndustryLine end gauge with care, avoiding impacts and ensuring clean, dry storage. Proper seating on flat datum surfaces and minimal contact force during transfer measurements will help preserve dimensional stability. Can this end measure be used as a master standard in inspection sets? The 150 mm nominal size and Grade 0 conformity make this measure appropriate as a reference in master sets and comparative gauging arrangements used in quality control and acceptance tests. What information identifies this item for ordering and inventory? This product is listed as End measure 150 mm, Metav IndustryLine, SKU M320.150.0 and GTIN 4054469132389 for procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Gauge Block, Grade 1, Hardened Special Steel, DIN EN ISO 3650 - Metav IndustryLine
Take advantage of the combination of Grade 1 tolerance and a hardened special steel construction for a reliable workshop reference that improves measurement repeatability; order directly via Metav Werkzeuge or consult our specialists for integration advice. End measure 150 mm – Grade 1 gauge block, DIN EN ISO 3650 (Metav IndustryLine) A 150 mm end measure, supplied as a precision gauge block for dimensional verification and workshop calibration, compliant with the DIN EN ISO 3650 Grade 1 standard and suited to component inspection and tool setting Grade 1 tolerance to DIN EN ISO 3650 150 mm nominal length, stable reference Hardened special steel construction Compact 35 x 9 mm cross-section Precision that stabilises production output A Grade 1 reference standard provides a dependable baseline for machinery set-up and inspection processes. The Grade 1 tolerance specified by DIN EN ISO 3650 translates into predictably low deviation during comparative measurements, which reduces rework and shortens setup times. As a stable reference, this gauge block supports consistent part quality across batches, enabling measurable efficiency gains in the metrology loop. Robust construction for repeatable results Manufactured from hardened special steel, the block combines wear resistance with dimensional stability under normal workshop conditions. The 35 x 9 mm cross-section gives a compact form factor while maintaining sufficient mass for thermal inertia; this helps to limit short-term temperature-induced drift during routine use. The result is a durable calibration standard that preserves its reference value over prolonged service life. Practical benefits for everyday inspection tasks At 150 mm, this gauge sits in the range commonly used for medium-sized components and jigs. Its length makes it a practical choice for bench checks, comparator setups and as a master for step gauges or length standards. The compact profile eases handling and storage while the mass (approximately 0.5 kg) provides a reassuring, stable feel during alignment and measurement operations. Traceable conformity and workshop confidence Supplied according to the DIN EN ISO 3650 standard, the device is intended to be used as a national workshop reference or a secondary standard in production environments. Clear material specification and normative compliance support traceability in quality records and audits. Choosing a standardised gauge block removes ambiguity from calibration chains and simplifies documentation for internal quality systems. Select the Metav IndustryLine Grade 1 150 mm gauge block for a dependable workshop reference — contact Metav Werkzeuge in Emmerich for product matching and technical guidance at info@metav-werkzeuge.com or by phone Technical Data Article number: M320.150.1 Nominal size: 150 mm Material: Special steel, hardened Standard: DIN EN ISO 3650 Tolerance class: Grade 1 Cross-section: 35 x 9 mm Weight: 0.5 kg GTIN: 4054469132396 Customs tariff number: 90173000 Facts Nominal length: 150 mm Cross-section dimensions: 35 mm x 9 mm Mass: 0.5 kg GTIN code: 4054469132396 Customs code: 90173000 Special features Category: End measures / gauge blocks Manufacturer brand: Metav IndustryLine Compliance: DIN EN ISO 3650 Tolerance level: Grade 1 Material finish: hardened special steel FAQ What accuracy can be expected from this gauge block? The End measure 150 mm (Grade 1) fulfils the tolerance requirements of DIN EN ISO 3650 for Grade 1, providing a stable reference suitable for workshop and inspection applications. Is the material specified for heavy use and wear resistance? Yes, the block is made from hardened special steel, offering improved wear resistance and dimensional stability during normal metrology and shop-floor use. For which applications is a 150 mm end measure most suitable? This 150 mm gauge block is ideal for medium-sized components, comparator setups and length verification tasks where a stable, standardised reference improves repeatability. Does the product come with an official identifier for inventory? The product is listed under article number M320.150.1 and GTIN 4054469132396 for unambiguous identification in procurement and stock systems. Can this gauge be used as a secondary standard in a production environment? Yes, the Grade 1 classification and DIN EN ISO 3650 conformity make it suitable as a secondary workshop standard for routine checks and process control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Take advantage of the combination of ceramic stability, Grade 1 accuracy (DIN 861/1) and compact handling for dependable reference measurements. Order the gauge block directly via Metav Werkzeuge or consult the Metav team for application advice. Ceramic gauge block 16 mm — Grade 1 reference (DIN 861/1) by Metav IndustryLine A Ceramic gauge block 16 mm, Grade 1, designed as a robust length reference for workshop calibration and precision setting tasks Ceramic material for thermal stability Grade 1 accuracy to DIN 861/1 Wear-resistant and chemically inert Compact 16 mm reference standard Consistent reference accuracy for routine calibration The Ceramic gauge block 16 mm, Grade 1 serves as a stable reference for length checks and comparative measurements in toolrooms and calibration benches. Manufactured to Güte 1 (Grade 1) according to DIN 861/1, the block provides a well-defined tolerance band suitable for workshop-level verification and equipment set-up. The compact 16 mm nominal length, combined with a low mass and precise finish, facilitates repeatable contact with comparators and setting devices while reducing the risk of handling-induced deviation. As a consequence, measurement routines become more predictable and downtime for readjustment is minimised. Material benefits: thermal and chemical stability that supports accuracy Made from high-grade ceramic, this reference piece offers markedly lower thermal expansion compared with steel, delivering thermal stability during short transfers between workstations or within temperature-controlled rooms. The material’s chemical inertness and resistance to corrosion reduce surface degradation over time, so the reference dimension remains reliable under normal workshop conditions. Its wear-resistant surface preserves gauge integrity over repeated use, keeping re-measurement intervals longer and the need for frequent replacement lower than with softer materials. Practical handling and integration into quality workflows The small footprint and light weight make the block easy to place into fixture sets or to use as a reference master when setting micrometers, callipers or comparators. The compact form supports quick alignment and reduces the chance of leverage errors during contact measurement. Identifiers such as SKU M324.016 and GTIN 4054469143200 enable traceable inventory handling and integration into asset management systems. For routine inspection tasks where a stable, non‑magnetic reference is preferred, this block offers a pragmatic balance between portability and metrological performance. Secure the Metav IndustryLine ceramic gauge block via Metav Werkzeuge — contact the Emmerich team for specification support and rapid dispatch to the workshop Technical data Article number: M324.016 GTIN: 4054469143200 Material: Ceramic Nominal length: 16 mm Grade: 1 (DIN 861/1) Weight: 0.03 kg Tariff code: 90173000 Numbers / Core technical data Nominal length: 16 mm Weight: 0.03 kg GTIN numeric: 4054469143200 Tariff number: 90173000 Special features / Versions Ceramic material for low thermal expansion Grade 1 accuracy to DIN 861/1 Compact reference standard Wear‑resistant and chemically inert surface FAQ What accuracy class does this gauge block offer? The ceramic gauge block is manufactured to Grade 1 (Güte 1) according to DIN 861/1, providing the dimensional control expected for workshop and calibration-bench reference standards. Why choose a ceramic gauge block over a steel reference? Ceramic offers lower thermal expansion and chemical inertness, so the block maintains its dimension with less influence from short-term temperature shifts and resists corrosion better than many steel references. For which applications is this 16 mm reference suitable? The 16 mm block is intended for routine calibration, setting and comparative measurements in toolrooms, inspection benches and when establishing master references for micrometers and callipers. Is this gauge block easy to integrate into an inventory system? Yes; the product is supplied with identifiers such as SKU M324.016 and GTIN 4054469143200, which assist in traceability and stock control. How should the ceramic gauge block be handled and stored? Handle the block with care to avoid impact and grit; store it in a clean, dry container away from abrasive materials to preserve the wear‑resistant surface and maintain dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 mm Gauge Block Grade 0 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a highly stable reference standard that combines DIN EN ISO 3650 conformity with a hardened special-steel construction for consistent dimensional checks; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. End gauge 16 mm, DIN EN ISO 3650, Grade 0 — Metav IndustryLine The End gauge 16 mm, DIN EN ISO 3650, Grade 0 is a compact, hardened reference standard designed for traceable calibration and precision verification in metrology labs and workshop quality control. DIN EN ISO 3650 Grade 0 tolerance Hardened special steel construction Nominal size 16 mm, compact reference Cross-section 35 x 9 mm for rigidity Exact conformity for repeatable measurements The gauge is manufactured to DIN EN ISO 3650 with Grade 0 accuracy, providing a reproducible reference for comparative and verification tasks. As an ISO-based end standard, it supplies a defined nominal length of 16 mm and a tightly controlled tolerance band, which translates into fewer measurement uncertainties during routine checks. This rational advantage supports faster decision-making in quality control and reduces rework rates by ensuring that master standards and measuring instruments are consistently referenced to a certified dimension. Robust material and form for long-term stability Made from hardened special steel, the body offers wear resistance and dimensional stability under normal workshop conditions. The profile for sizes above 10.1 mm uses a 35 x 9 mm cross-section, enhancing stiffness and helping to minimise bending when used as a transfer standard. With a mass of approximately 0.02 kg, the component is easy to handle while remaining solid enough to resist accidental deformation. These material choices extend the usable life of the standard and lower the total cost of ownership through fewer replacements. Practical use and integration into inspection routines As a compact end standard, the 16 mm gauge serves well for calibration benches, comparator setups and routine verification of micrometre and caliper references. The article is identified as M319.160.0 and carries GTIN 4054469131801 for straightforward inventory and traceability. Its compact dimensions make it simple to store in a protective tray or a dedicated holder; when used as part of a calibrated set, the gauge contributes to a coherent measurement chain that supports quality documentation and audit trails. For environments requiring certified calibration, the item can be referenced in laboratory protocols and inspection plans. For traceable precision: request the Metav IndustryLine end gauge via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com for tailored advice and supply options Technical data Article number: M319.160.0 GTIN: 4054469131801 Tariff number: 90173000 Facts Nominal size: 16 mm Weight: 0.02 kg Cross-section (for >10.1 mm): 35 x 9 mm Special features Material: hardened special steel Standard: DIN EN ISO 3650 Grade: 0 FAQ What tolerance class does this gauge meet? The end gauge complies with DIN EN ISO 3650 and is supplied in Grade 0, which ensures a narrow tolerance suitable for precise reference and calibration tasks. Is the gauge suited for workshop and laboratory use? Yes, the hardened special-steel construction and compact form of the End gauge 16 mm, DIN EN ISO 3650, Grade 0 make it suitable for both workshop verification and laboratory reference roles. How is the item identified for inventory and traceability? The product is listed as M319.160.0 and carries GTIN 4054469131801 for straightforward stock control and traceability within inspection systems. What handling precautions should be observed? Handle the gauge carefully to avoid impacts and contamination; store it in a clean, dry tray or protective holder to preserve the hardened surface and dimensional integrity. Can this gauge be used as a transfer standard in comparator setups? The compact 16 mm reference is well suited to comparator and transfer applications where a stable, calibrated nominal length is required for comparative measurement chains. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 mm Gauge Block, Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a high-precision reference delivered in a hardened special-steel finish and conforming to DIN EN ISO 3650, Grade 1 for dependable dimensional control. Order the unit directly via Metav Werkzeuge or consult the Metav team for specification matching and fast supply. End gauge 16 mm (DIN EN ISO 3650, Grade 1) — Hardened special steel, Metav IndustryLine The End gauge 16 mm is a precision reference gauge designed for dimensional inspection and calibration tasks in metrology laboratories and industrial quality control. DIN EN ISO 3650, Grade 1 accuracy Hardened special steel construction Nominal size 16 mm for calibration tasks Compact cross-section 35 x 9 mm for stable handling Reliable reference for repeatable dimensional checks A Grade 1 reference under DIN EN ISO 3650 serves as a stable benchmark for routine inspection and calibration workflows. The nominal 16 mm dimension provides a common reference point for verification of gauges, fixtures and measuring instruments, reducing uncertainty in production control. By specifying a Grade 1 item, the focus is on measurable repeatability and adherence to an established international standard, which supports reproducible quality checks across production batches and inspection routines. Durable, low‑deformation design for consistent use Constructed from hardened special steel, the gauge offers resistance to wear and surface damage that could affect long‑term accuracy. The profile for this nominal size features a 35 x 9 mm cross‑section, giving a favourable stiffness-to-mass ratio that minimises flexing during handling and storage. With a mass of approximately 0.02 kg, the piece is easy to position while remaining dimensionally stable; the material choice and compact geometry together extend the service life of the reference surface under regular use. Clear identification and ready workshop integration Marked and stocked under SKU M319.160.1 and identified by GTIN 4054469131818, the unit integrates smoothly into traceability and inventory systems. The designation as an end measure in the metrology category clarifies its role as a reference element for calibration and inspection. For customers seeking consistent supply and a clear provenance, the Metav IndustryLine badge denotes a supplier chain with a European quality filter and logistic presence that simplifies procurement and workshop planning. Contact Metav Werkzeuge for a bespoke supply or technical clarification on the M319.160.1 — Metav IndustryLine will advise on fitment, delivery and documentation to match quality control requirements (info@metav-werkzeuge.com • +49 2822 7131930) Technical data Article number: M319.160.1 GTIN: 4054469131818 Standard: DIN EN ISO 3650 Facts Nominal size: 16 mm Weight: 0.02 kg Grade: 1 Tariff code: 90173000 Special features Material: hardened special steel Cross-section: 35 x 9 mm Category: End measures Manufacturer: Metav IndustryLine FAQ What tolerance class does this end gauge meet? The end gauge conforms to DIN EN ISO 3650, Grade 1, which designates a high level of dimensional accuracy suitable for laboratory and workshop reference tasks. Is the 16 mm reference suitable for routine inspection tasks? Yes, the End gauge 16 mm (M319.160.1) is intended as a repeatable reference point for routine calibration and inspection scenarios where a stable nominal dimension is required. What material is used and why does it matter? The gauge is made from hardened special steel, chosen for wear resistance and long-term surface stability to preserve measurement integrity under regular use. How is the item identified for inventory and traceability? The unit is supplied with SKU M319.160.1 and GTIN 4054469131818, facilitating integration into procurement and traceability systems. For which applications is this end measure typically used? This end measure is used as a precision reference in quality control, calibration benches and metrology labs where a Grade 1 standard-length reference is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.5 mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
The combination of Grade 1 accuracy, low thermal drift from ceramic construction and a compact 16.5 mm nominal length makes this gauge block an excellent reference piece for precision stacks and calibration tasks. Order the part directly via Metav Werkzeuge or contact the consultants for application advice. Ceramic gauge block 16.5 mm (Grade 1 DIN 861/1) — Metav IndustryLine precision standard A Ceramic gauge block 16.5 mm (Grade 1 DIN 861/1) designed as a stable reference element for calibration benches and precision assembly jigs Ceramic construction for thermal stability and wear resistance Grade 1 accuracy according to DIN 861/1 Nominal length 16.5 mm for reference stacks Consistent reference performance for calibration and inspection The ceramic construction delivers a stable reference that resists corrosion and shows a reduced coefficient of thermal expansion compared with many steels, which translates into reliable length reproducibility when used in temperature‑controlled environments. With Grade 1 tolerance per DIN 861/1, this standard fits into laboratory and workshop inspection routines where trustworthy repeatability and stackability matter. The compact 16.5 mm size is especially useful for building fine calibration stacks and for use as a short reference in fixture set‑ups, providing a balance between handling convenience and metrological function. Practical benefits in the workshop and metrology lab Low mass and a hard ceramic surface reduce wear during repeated wringing and handling, so long‑term dimensional integrity is improved. The material choice supports clean wringing contact and minimises the need for frequent rework of reference surfaces, which helps maintain throughput in routine quality checks. As a result, the standard contributes to faster setup cycles and fewer interruptions in inspection work, underlining its role as a time‑saving, precision element in production and quality control workflows. Integration into measurement sets and traceable routines Compact gauge blocks like this one are straightforward to combine with other standards to form traceable stacks for comparative measurements or for verifying measuring instruments. Their stable geometry and resistance to corrosion make them well suited for repeated wringing and stacking procedures used during calibration rounds. When incorporated into regular verification plans, the block supports reproducible checks that underpin statistically meaningful process control and documentation. For procurement or technical clarification, contact Metav Werkzeuge for tailored advice and ordering support based on Metav IndustryLine standards Technical data SKU: M324.016.5 GTIN: 4054469143217 Tariff code: 90173000 Facts Nominal length: 16.5 mm Weight: 0.031 kg Tolerance class: Grade 1 (DIN 861/1) Special features Material: Ceramic Category: Gauge blocks / End measures Intended use: Reference standard for calibration and stacks FAQ What tolerance class does this gauge block meet? The gauge block conforms to Grade 1 tolerances as specified in DIN 861/1 and is supplied as the Metav IndustryLine ceramic reference with SKU M324.016.5. Is the block suitable for stacking with steel gauge blocks? Yes. The ceramic standard is designed for wringing and stacking with other blocks; care with surface cleanliness is advised to ensure optimal contact and repeatability. Can this block be used in a production environment without temperature control? The ceramic material offers lower thermal expansion than many steels, improving stability, but for the most accurate results a temperature‑controlled environment is recommended when making metrological comparisons. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.5 mm Gauge Block Grade 1 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
The combination of DIN EN ISO 3650 conformity, Grade 1 tolerance and a hardened special steel construction ensures reliable, repeatable dimensional checks; excellent for incoming inspection and process control. Order the gauge directly via Metav Werkzeuge or consult the technical team for application advice. End gauge 16.5 mm (DIN EN ISO 3650, Grade 1) — Metav IndustryLine precision gauge End gauge 16.5 mm for dimensional verification in production, inspection and quality-assurance workflows, designed to provide a compact, robust reference for go/no‑go and comparative checks DIN EN ISO 3650 Grade 1 accuracy Hardened special steel construction Compact 16.5 mm nominal size Precise dimensional verification tool Reliable accuracy for repeatable inspection results The end gauge 16.5 mm is manufactured to DIN EN ISO 3650 and delivered as Grade 1, providing a quantifiable accuracy class that supports reproducible inspection outcomes. The adherence to the standard means the gauge fits into documented quality procedures and audit trails, reducing uncertainty during acceptance tests. As a compact reference, the instrument is suitable for frequent use on the shop floor and in the inspection room, where precision and conformity to norms determine whether components pass or trigger rework. Robust materials and compact form for everyday use Made from hardened special steel, the gauge resists wear and maintains its nominal dimension under repeated handling, which lowers the need for early replacement and preserves measurement certainty. The compact cross‑section—30 x 9 mm up to 10 mm diameter, switching to 35 x 9 mm above 10.1 mm—keeps the component stable in use while remaining easy to position in small bores or fixtures. The low mass supports safe handling during rapid inspection cycles and reduces the risk of accidental damage when transferred between bench and calibration cabinet. Practical integration into quality workflows As a simple, standardised reference, this precision gauge speeds up go/no‑go checks and comparative setups without complex fixturing. Its nominal size and conformity to international standard permit straightforward documentation in inspection records and process control charts, helping to demonstrate traceable verification. The robust construction and normative compliance make it a pragmatic choice for suppliers, machine shops and quality departments aiming to reduce reject rates and improve throughput while keeping calibration and maintenance demands manageable. Contact Metav Werkzeuge for personalised application support and to arrange supply of the Metav IndustryLine end gauge 16.5 mm from our Emmerich warehouse Technical data Article number: M319.165.1 GTIN: 4054469131832 Weight: 0.023 kg Norm: DIN EN ISO 3650 Grade: 1 Material: Special steel, hardened Facts Nominal dimension: 16.5 mm Cross‑section up to 10 mm: 30 x 9 mm Cross‑section from 10.1 mm: 35 x 9 mm Tariff number: 90173000 Special features Category: End gauges Conformity: DIN EN ISO 3650 Construction: hardened special steel Intended use: dimensional verification, go/no‑go checks FAQ What tolerance class does this gauge meet? The gauge is manufactured and supplied to Grade 1 specification according to DIN EN ISO 3650, ensuring a recognised tolerance class for inspection tasks. Is the material suitable for repeated workshop use? Yes, the hardened special steel construction of the end gauge provides wear resistance suitable for regular use in shop and inspection environments. How should the gauge be used in a go/no‑go check? The end gauge 16.5 mm serves as a fixed dimensional reference for quick pass/fail checks or comparative measurements during incoming inspection and in‑process control. Can this gauge be documented in quality records? Conformity with DIN EN ISO 3650 allows the gauge to be cited in inspection procedures and recorded in quality documentation for traceability. What dimensions define the gauge’s profile? The instrument has a compact profile: 30 x 9 mm cross‑section up to 10 mm and 35 x 9 mm from 10.1 mm nominal diameter, supporting stable seating in small features. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16.5mm Calibration Gauge Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of a DIN EN ISO 3650 Grade 0 reference manufactured from hardened special steel and sized at 16.5 mm for highly repeatable dimensional checks; the compact, robust form supports stable handling and long service life. Order the gauge directly via Metav Werkzeuge or consult our advisors if additional technical information is required. Single end gauge 16.5 mm — Grade 0 (Metav IndustryLine) The Single end gauge 16.5 mm is a precision reference end gauge for dimensional inspection and verification in calibration laboratories and quality control environments. DIN EN ISO 3650 Grade 0 accuracy Hardened special steel construction Nominal size 16.5 mm Cross-section optimized for rigidity 35x9 mm Certified accuracy for dependable inspection results Built to the DIN EN ISO 3650 specification and classified as Grade 0, this end gauge provides a high level of dimensional certainty for inspection tasks. The Grade 0 designation indicates very tight manufacturing tolerances, making the part suitable as a reference for setting and checking measuring instruments or for use in high-precision quality control routines. Using a standardised reference minimises uncertainty in measurement chains and supports consistent decision-making in production and inspection processes. Durable construction that keeps measurements stable Manufactured from hardened special steel, the component resists wear and maintains geometry under regular use. The supplied cross-section 35x9 mm (applicable above 10.1 mm nominal size) increases stiffness and reduces flexing during handling, which in turn improves repeatability of contact measurements. The combination of a compact form and robust material reduces the frequency of replacement and helps preserve the reference dimension over prolonged service life. Practical integration into laboratory and workshop workflows This reference item is delivered as a single, traceable gauge identified by GTIN 4054469131825 and article number M319.165.0, which simplifies inventory and calibration records. As a standardised measuring artefact, it is suited to bench checks, plug-type comparisons and as a baseline for comparative measurements. The compact mass and size support easy placement in inspection jigs and allow quick verification steps without extensive handling time, improving throughput in routine quality inspections. Contact Metav Werkzeuge for tailored metrology advice and acquisition of Metav IndustryLine reference gauges; reach us via info@metav-werkzeuge.com or by phone at +49 2822 7131930 and benefit from local supply and technical guidance from Emmerich. Technical data Article number: M319.165.0 GTIN: 4054469131825 Standard: DIN EN ISO 3650 Nominal size: 16.5 mm Grade: 0 Facts Weight: 0.023 kg Tariff code: 90173000 Special features Material: Special steel, hardened Cross-section: bis 10mm 30x9mm, ab 10,1mm 35x9mm Category: End gauges Brand: Metav IndustryLine FAQ What level of accuracy does this end gauge provide? The end gauge conforms to DIN EN ISO 3650 and is manufactured to Grade 0, offering very tight tolerances suitable for demanding inspection tasks. Is the gauge suitable for routine workshop checks or only for calibration labs? The compact, hardened construction makes the item appropriate for both calibration laboratories and everyday workshop verification where a stable reference dimension is required. How is the gauge identified for inventory and traceability? Identification is provided by article number M319.165.0 and GTIN 4054469131825, facilitating record keeping and traceability across inspection and procurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17 mm Gauge Block Grade 1 DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Grade 1 accuracy to DIN EN ISO 3650, a hardened special steel construction and a compact 17 mm nominal size together provide a stable, long‑lasting reference standard for inspection and calibration; order the gauge block directly via Metav Werkzeuge or ask our consultants if needed. Gauge block 17 mm — DIN EN ISO 3650 Grade 1, hardened special steel (Metav IndustryLine) A gauge block 17 mm designed as a precise length reference for calibration, inspection and fixture set‑up in machine shops and quality departments. DIN EN ISO 3650 — Grade 1 accuracy Hardened special steel for durability Compact nominal 17 mm reference Reliable reference for routine inspection and calibration This compact length standard offers repeatable accuracy in everyday quality control tasks. Conforming to DIN EN ISO 3650 at Grade 1, the block reduces measurement uncertainty when used as a reference for comparators, micrometres or as a master during visual and tactile checks. The nominal 17 mm dimension makes it ideal for checking small gauges, plug gauges and setup shims, while its defined tolerance band supports traceable results and efficient decision‑making in production control. Built for longevity and stability in the workshop Manufactured from hardened special steel, the piece resists wear and preserves its surface integrity over prolonged use. The selected material and heat treatment ensure long‑term stability, meaning fewer replacements and a consistent reference over time. The block’s compact cross‑section balances rigidity with handling convenience, so the reference remains stable during contact measurements and when used in stacked configurations for setting compound lengths. Practical handling and integration into workflows The compact format and nominal size make the standard straightforward to store, handle and incorporate into routine calibration sets. As a discrete length reference, it simplifies quick verifications on the shop floor and supports efficient setup procedures at the machine. For laboratories requiring documented traceability, the block serves as a reliable working standard; additional technical details and advice for integration into existing control plans can be provided on request by Metav’s technical team. Contact Metav Werkzeuge for tailored advice on implementing Metav IndustryLine gauge blocks and secure consistent measurement performance for your inspection routines Technical Data Article number: M319.170.1 GTIN: 4054469131856 Material: Special steel, hardened Nominal size: 17 mm Standard: DIN EN ISO 3650 Grade: 1 Facts Weight: 0.027 kg Cross-section: up to 10 mm: 30 x 9 mm; from 10.1 mm: 35 x 9 mm Tariff number: 90173000 Special features Precision reference for calibration and inspection Compact format, nominal 17 mm Category: Endmasse (end measures) Durable hardened surface treatment FAQ What level of accuracy does this gauge block provide? The gauge block complies with DIN EN ISO 3650 at Grade 1, providing the accuracy expected of a workshop reference standard for routine inspection. What material is used for the block? The component is made from hardened special steel, selected for wear resistance and dimensional stability under repeated contact measurements. Is the 17 mm size suitable for small‑part setups? Yes, the nominal 17 mm dimension is compact and well suited to setting and checking small gauges, shims and measurement fixtures in machining and assembly operations. Can this block be used as a working standard in a calibration lab? The block is appropriate as a working reference for calibration and inspection; for formal calibration procedures, the block can be referenced within the laboratory’s traceability chain. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17 mm Gauge Block Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of the combination of certified accuracy, robust material and compact handling for reproducible reference measurements. The combination of DIN EN ISO 3650 conformity and Grade 0 tolerance ensures a dependable master reference for workshop and laboratory use. Order the single end gauge directly via Metav Werkzeuge or consult our specialists for technical advice. Single end gauge 17 mm — DIN EN ISO 3650, Grade 0 by Metav IndustryLine Single end gauge 17 mm is a calibrated precision reference for dimensional control and gauge calibration across machine shops and inspection benches DIN EN ISO 3650 compliant Grade 0 Hardened special steel construction Precise 17 mm nominal size Compact, low-mass reference piece Reproducible reference for routine calibration and inspection The 17 mm single end gauge is manufactured to DIN EN ISO 3650 and delivered in Grade 0, giving a well-defined tolerance band suitable as a master for routine calibration tasks and reference checks. As a compact reference standard, it supports traceable measurement chains and contributes to reduced measurement uncertainty when used as the comparative element for plug gauges, sets of gauge blocks or comparator fixtures. The standardised geometry simplifies interchangeability with other calibrated artefacts and inspection fixtures. Durable construction for long service life and stability Made from special steel, hardened, this reference combines surface hardness with a compact cross‑section that resists wear and maintains form across repeated contact cycles. The specified cross‑section dimensions provide lateral stiffness appropriate for a single end gauge of this nominal size, helping to preserve dimensional integrity during handling and storage. The low mass and small footprint make the piece easy to position in measuring setups while remaining robust against routine use. Practical integration into metrology workflows As a grade‑defined master piece, the single end gauge integrates readily into workshop inspection routines, comparison measurements and set‑building for transfer standards. The clear specification of standard and grade facilitates documentation and quality records, while the compact form factor aids rapid swapping between fixtures. Where repeatability and a stable reference are required, this precision end gauge reduces process variability and supports consistent quality decisions. Choose Metav IndustryLine masters for standardised, workshop-ready metrology — contact Metav Werkzeuge to discuss delivery and calibration options Technical Data Article number: M319.170.0 GTIN: 4054469131849 Nominal size: 17 mm Material: Special steel, hardened Standard: DIN EN ISO 3650 Grade: 0 Weight: 0.027 kg Tariff number: 90173000 Cross-section: up to 10 mm → 30 x 9 mm; from 10.1 mm → 35 x 9 mm Data Nominal size: 17 mm Weight: 0.027 kg GTIN: 4054469131849 Tariff number: 90173000 Special features DIN EN ISO 3650 compliance Grade 0 tolerance Hardened special steel construction Compact single end design Category: End gauges / Gauge blocks FAQ What tolerance does this end gauge meet? The single end gauge is manufactured to Grade 0 tolerance in accordance with DIN EN ISO 3650, providing a defined accuracy class for reference and calibration uses. Is the 17 mm gauge suitable for workshop master sets? Yes, the 17 mm single end gauge from Metav IndustryLine is intended as a compact master reference and can be combined into sets or used for comparative measurements on inspection benches. What material is used and how does it affect wear? Constructed from hardened special steel, the gauge offers improved wear resistance and long-term dimensional stability under normal workshop handling. Can this end gauge be used directly in comparator fixtures? The compact geometry and standardised dimensions make the gauge suitable for use in comparator fixtures and transfer measurement setups where a stable reference point is required. Is the piece traceable and documented for quality records? The product specification (DIN EN ISO 3650, Grade 0) supports traceable documentation practices; Metav IndustryLine items are supplied with the necessary product identification for quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.5 mm Gauge Block Single End, Grade 0, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
The combination of DIN EN ISO 3650 Grade 0 accuracy, a hardened special-steel construction and a compact 17.5 mm nominal length delivers a reliable reference for precision gauge stacks and calibration routines; order directly via Metav Werkzeuge or consult product information for stack planning. Single gauge block 17.5 mm – DIN EN ISO 3650 Grade 0, hardened special steel (Metav IndustryLine) The single gauge block 17.5 mm provides a Grade 0 reference block for high-precision metrology and modular gauge-stack assembly in quality control and workshop environments DIN EN ISO 3650 Grade 0 accuracy Hardened special steel for durability Compact nominal length 17.5 mm Suitable for precision gauge stacks Consistent accuracy for reference measurements Manufactured to DIN EN ISO 3650, the block offers Grade 0 dimensional performance suitable for demanding reference tasks. The nominal 17.5 mm size fills intermediate gaps in gauge stacks and allows precise, repeatable combinations with other blocks. Because the geometry follows the international standard, it supports traceable length standards and reduces combination errors when used in certified stacks. The hardened construction preserves surface integrity, ensuring long-term precision and minimal wear under normal metrology use. Robust material and geometry for dependable handling The block is produced from hardened special steel, which gives a stable contact surface and resistance to deformation during handling and stacking. The specified cross-section dimensions accommodate standard clamp and holder designs and maintain rigidity in stack assemblies. For practical use, the block’s mass and trimmed faces enable secure mating between blocks, while the material choice aids thermal stability within typical workshop conditions—contributing to reproducible measurement results and lower uncertainty in comparative inspections. Integration into measurement routines and gauge stacks As a single reference element, this precision block is intended for inclusion in gauge stacks and comparative length checks where sub-0.1 mm accuracy is required. The compact format simplifies storage and organisation of sets while the standardized dimensions allow straightforward planning of stack combinations. When paired with other Grade 0 or matched-grade blocks, the assembly forms a reliable master reference for calibration benches and on-machine checks, supporting efficient quality-control workflows without extensive setup time. Choose Metav IndustryLine when traceable Grade 0 references are required — contact Metav Werkzeuge for availability and configuration advice to match the block to existing sets Technical Data Article number: M319.175.0 GTIN: 4054469131863 Weight: 0.031 kg Facts Nominal size: 17.5 mm Tolerance grade: 0 (Grade 0) Cross-section: up to 10 mm → 30 × 9 mm; from 10.1 mm → 35 × 9 mm Customs tariff number: 90173000 Special features Material: hardened special steel Standard: DIN EN ISO 3650 Category: End measures / gauge blocks FAQ What standard does this gauge block comply with? The single gauge block 17.5 mm is manufactured to DIN EN ISO 3650 and specified to Grade 0 tolerances for precision reference use. What material is the block made from? The block is produced from hardened special steel, providing wear resistance and stable contact surfaces for repeated stacking and measurement. Is the 17.5 mm block suitable for use in gauge stacks? Yes. The 17.5 mm nominal length is intended for combination in precision gauge stacks and for filling intermediate lengths in reference assemblies. What cross-section applies to this gauge block? Cross-section specification is given as: up to 10 mm → 30 × 9 mm; from 10.1 mm → 35 × 9 mm, ensuring compatibility with standard holders and clamps. What are the dimensions and mass of the block? Nominal size is 17.5 mm and the mass is 0.031 kg, consistent with compact reference elements for workshop stacks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.5mm Ceramic Gauge Block Grade 1 DIN 861/1 - Metav IndustryLine
Benefit from the combination of ceramic construction, Grade 1 (DIN 861/1) accuracy and a compact 17.5 mm nominal size for dependable reference measurements; order directly via Metav Werkzeuge or consult our specialists for application advice. Ceramic end gauge 17.5 mm, Grade 1 (DIN 861/1) — Precision gauge block by Metav IndustryLine The Ceramic end gauge 17.5 mm, Grade 1 (DIN 861/1) is a compact precision gauge block designed as a stable reference for calibration and high-accuracy inspection tasks in workshops and quality-control environments. Ceramic material for dimensional stability Grade 1 accuracy to DIN 861/1 Compact 17.5 mm nominal size Light handling weight 0.033 kg Reliability and calibrated-grade accuracy for inspection A Grade 1 specification according to DIN 861/1 denotes a high level of dimensional precision suitable for many workshop and inspection duties. The gauge block serves as a traceable reference when establishing measurement baselines or verifying instruments. Thanks to the manufacturing tolerance implied by the grade, the block provides reproducible values that support consistent quality control and reduce uncertainty in routine checks. Material advantages and practical handling Manufactured from ceramic, the block offers notable resistance to wear and a lower coefficient of thermal expansion compared with many metallic standards; this supports stable readings across typical workshop temperature variations. The 17.5 mm nominal size makes the block convenient for inclusion in precision stacks and easy to handle during set-up, while the low mass simplifies manual manipulation and minimises the risk of unintended overload on delicate fixturing. These material and form-factor choices contribute to lower maintenance and long-term dimensional integrity. How this block fits into measurement workflows As a compact reference component, the block integrates cleanly into comparator setups, stack assemblies and spot checks on production lines. The neutral dimensional behaviour of ceramic complements a calibrated instrument fleet by providing a consistent standard for interim verification. For bespoke measurement strategies or compatibility checks, Metav’s specialists can advise on stacking sequences and storage to protect the block and preserve accuracy over time. Contact Metav Werkzeuge to discuss how the Metav IndustryLine ceramic gauge block with Grade 1 accuracy can be integrated into existing inspection routines and quality systems Technical data Article number: M324.017.5 GTIN: 4054469143231 Material: Ceramic Nominal size: 17.5 mm Grade: 1 (DIN 861/1) Facts Weight: 0.033 kg Tariff number: 90173000 ECLASS: 21170108 Special features Category: End measures (gauge blocks) Label: Ceramic end gauge 17.5 mm, Grade 1 DIN 861/1 Brand: Metav IndustryLine FAQ What accuracy class does the block have? The block meets Grade 1 accuracy according to DIN 861/1, providing a high-precision reference for workshop inspection and instrument checks. Is the block supplied with a calibration certificate? The Ceramic end gauge 17.5 mm, Grade 1 (DIN 861/1) is supplied under standard calibration practice; an ISO 17025 certificate is not indicated for this item. What are the benefits of the ceramic material? Ceramic provides excellent wear resistance and reduced thermal expansion, so the gauge block maintains dimensional stability for reliable measurement references. Can this size be used in gauge stacks? Yes, the 17.5 mm nominal dimension is suitable for incorporation into precision stacks and comparative measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.5mm Gauge Block Grade 1, DIN EN ISO 3650, Hardened Special Steel - Metav IndustryLine
Take advantage of Grade 1 accuracy, DIN EN ISO 3650 conformity and the stability of hardened special steel to secure a reliable reference for dimensional control; order directly via Metav Werkzeuge or contact our consultants for application advice. End gauge 17.5 mm — precision gauge block, DIN EN ISO 3650 Grade 1 A End gauge 17.5 mm precision gauge block designed as a traceable reference for inspection, calibration and laboratory metrology. DIN EN ISO 3650 compliant grade 1 calibration standard Precision ground from hardened special steel Nominal size 17.5 mm for reference stacks Compact cross-section 35x9 mm for stable stacking Consistent reference accuracy for inspection and calibration The DIN EN ISO 3650 specification and Grade 1 classification make this gauge block a dependable reference within quality assurance routines. As a precision instrument with a 17.5 mm nominal length, it serves as a stable calibration element for micrometrology benches and incoming inspection. The standardised tolerance class supports reproducible results and simplifies specification management in serial checks and machine acceptance tests. Material and geometry for long-term dimensional stability Manufactured from hardened special steel, the block is precision ground to ensure flatness and parallelism over its faces. The geometry for this nominal size uses a 35x9 mm cross-section, providing the stiffness required for repeatable stacking and minimised deformation during handling. With a mass of 0.031 kg, the block is compact yet robust, reducing thermal inertia while remaining easy to manoeuvre in routine workflows. Integration into laboratory and workshop workflows Designed as a gauge block for both stand‑alone reference and stacked assemblies, this item integrates seamlessly into calibration sequences and fixture setups. The standardised form factor allows straightforward combination with other blocks for stepwise lengths and rapid verification tasks. Clear compliance with recognised standards supports documentation and audit trails in quality management systems. Practical handling and maintenance that protect measurement quality Flat, finely finished faces and a compact profile simplify cleaning, pairing and storage in organised inspection cabinets. Gentle handling, occasional lubrication of storage cases and avoidance of abrasive contact preserve the ground faces and dimensional integrity. The component's compactness also aids transport between bench, gauge room and measuring instruments, with minimal effect on temperature equilibration. For precise reference measurements and standardized inspection equipment, contact Metav Werkzeuge to discuss the Grade 1 17.5 mm gauge block and its suitability for specific calibration or production tasks; Metav Werkzeuge can provide purchasing and application support. Technical data Article number: M319.175.1 GTIN: 4054469131870 Designation: End gauge 17.5 mm, DIN EN ISO 3650, Grade 1 Facts Nominal size: 17.5 mm Weight: 0.031 kg Cross-section: 35x9 mm Tariff number: 90173000 Materials and features Material: special steel, hardened Standard: DIN EN ISO 3650 Grade: 1 Manufacturer: Metav IndustryLine FAQ What level of accuracy does this gauge provide? The gauge block conforms to DIN EN ISO 3650 as Grade 1, making it suitable as a traceable reference for many inspection and calibration tasks where a standardised tolerance class is required. What material and surface quality can be expected? This item is machined from hardened special steel and precision ground, delivering flat, parallel faces appropriate for stacking and reference measurements. Is the 17.5 mm size suitable for stack building and step measurements? Yes, the 17.5 mm nominal length is intended for use in assembled stacks and reference sets; the block's 35x9 mm cross‑section supports stable stacking and handling. Which SKU should be specified when ordering or documenting calibrations? Use SKU M319.175.1 (End gauge 17.5 mm) for ordering and inventory records to ensure the correct Grade 1 reference piece is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17.6 mm Gauge Block For Micrometer Verification, DIN EN ISO 3650/1 - Metav IndustryLine
Take advantage of a compact, traceable test artefact that combines DIN EN ISO 3650/1 conformity, hardened special steel construction and bench-friendly mass for reliable micrometre verification; order directly via Metav Werkzeuge or consult our specialists for application advice. End standard for micrometre testing, 17.6 mm (DIN EN ISO 3650/1) — Metav IndustryLine precision artefact with traceable dimension End standard for micrometre testing, 17.6 mm (DIN EN ISO 3650/1) provides a dedicated reference for routine verification and short-term checks of micrometres and comparable length gauges. Traceable to DIN EN ISO 3650/1 Precision 17.6 mm working dimension Special steel, hardened construction Compact 0.3 kg bench artefact Reliable verification with standardised traceability The end standard is manufactured to meet DIN EN ISO 3650/1, ensuring a measurable reference point for routine checks and conformity assessments. As a standardised artefact the component offers a single, well-defined 17.6 mm reference dimension that simplifies verification procedures and documentation. The clear normative basis supports audit trails and quality records, while the compact form factor reduces handling time during repeated checks. Durable construction for repeatable measurements Built from special steel and finished for metrological use, the device combines wear resistance with a weight that keeps it stable during bench checks (0.3 kg). The material choice and mechanical finish are aimed at minimising surface degradation so that the reference dimension remains stable across multiple cycles. This stability translates into fewer rechecks, improved throughput in incoming inspection and more consistent calibration intervals for workshop and laboratory environments. Practical integration into workshop and lab routines Designed as a straightforward reference artefact, the item supports a rational measurement workflow: quick comparison against micrometre readings, simple documentation of deviations and uncomplicated storage when not in use. The compact form and normative conformity make it suitable for production spot checks, incoming goods inspection and routine tool control. Together, these aspects contribute to measurable efficiency gains and help maintain process capability without complex handling or special fixtures. For calibrated reference artefacts and expert guidance on integrating standardised test pieces into measurement routines, contact Metav Werkzeuge in Emmerich — our specialists will advise on suitability, supply and logistics. Technical Data Article number: M318.203.5 GTIN: 4054469178431 Tariff number: 90173000 Designation: End standard for micrometre testing, 17.6 mm DIN EN ISO 3650/1 Manufacturer: Metav IndustryLine Facts Size: 17.6 mm Weight: 0.3 kg Special features Material: special steel Standard: DIN EN ISO 3650/1 Application: testing micrometres and length gauges FAQ What is this artefact used for? This end standard is used for verification of micrometres and similar length-measuring instruments to confirm the correct indication at the 17.6 mm reference point. Is the reference traceable to a recognised standard? Yes, the artefact is manufactured in accordance with DIN EN ISO 3650/1, which provides the normative basis for end standards used in micrometre verification. Which material is used and why does it matter? The device is made from special steel, chosen for mechanical stability and resistance to wear, ensuring prolonged dimensional stability during routine checks. Can this artefact be used in production checks? Its compact design and standard conformity make it suitable for spot checks in production, incoming inspection and routine tool control. Is a calibration certificate included? Calibration and certificates are handled according to the indicated standard when supplied; please consult Metav Werkzeuge for the exact calibration status at delivery. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ensure traceable length calibration with gauge blocks
gauge blocks, also called slip gauges or end gauges, are precision length standards designed to transfer exact measures during calibration and setup. Manufactured and graded for metrological use, they provide the reference dimensions needed to verify and adjust measuring instruments in industrial workshops and calibration labs.
how gauge blocks work and where they are essential
gauge blocks are used to create known lengths by wringing individual blocks together or by using a single block as a reference. length calibration in industry commonly relies on parallel gauge blocks, while angle, cylinder and sphere end gauges serve specialised tasks. these blocks are produced in steel, ceramic or carbide, and their material choice balances wear resistance with thermal behaviour. regular calibration—typically performed annually—by DAkkS-accredited laboratories ensures traceability. the highest-precision reference work, class K, is certified by the PTB using laser techniques; classes 0, 1 and 2 are tested under progressively less controlled conditions (class 0 in a climate-controlled lab, class 1 in a standard measurement room, class 2 in production).
measurable benefits that cut downtime and uncertainty
- consistent, traceable length standards reduce rework and measurement disputes by enabling reliable instrument calibration.
- choosing the correct material (steel, ceramic, carbide) extends service life and limits wear in high-use environments.
- selecting the right accuracy class (K, 0, 1 or 2) matches calibration effort to application needs and avoids over‑specification.
- annual calibration by accredited labs maintains documented compliance and supports quality systems such as ISO.
why Metav is a smart partner for precision standards
Metav combines specialist knowledge with a broad range of measurement technology, making the procurement of gauge blocks straightforward and dependable. with over 48,000 customers and more than 250,000 products stocked from Emmerich, Metav acts as a pragmatic quality filter for European workshops, reducing supplier complexity and ensuring consistent supply.
In short, gauge blocks deliver traceable, material‑appropriate and class‑matched references that keep calibration workflows efficient and auditable.
faq
what materials are gauge blocks available in and why does it matter?
gauge blocks are typically supplied in steel, ceramic or carbide. material choice affects wear resistance, stability and thermal expansion; selecting the right material for your environment optimises longevity and measurement stability.
how often should gauge blocks be calibrated?
industry practice is an annual calibration cycle, carried out by DAkkS-accredited laboratories, though frequency can be increased depending on usage and required uncertainty.
what do the accuracy classes k, 0, 1 and 2 indicate?
the classes denote graded tolerances and test conditions: K is the highest precision (certified by PTB with laser measurement), class 0 is checked under climate-controlled lab conditions, class 1 in a normal measurement room and class 2 in production environments.
are parallel gauge blocks always used for length calibration?
yes; for length calibration the parallel gauge blocks are the primary standard because they provide exact planar faces for wringing and stacking to create precise lengths.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com