Granite plates for ultra-stable metrology foundations
Granit plates provide an absolutely flat, thermally stable reference surface for precision metrology and toolmaking, enabling repeatable calibration and accurate scribing of workpieces while resisting wear and corrosion. Used as a primary surface plate, these granite inspection plates offer exceptional form stability and low thermal expansion, ensuring reliable measurements even in non‑climatised workshops. Their non‑magnetic, non‑conductive and scratch‑resistant properties let sensitive gauges and fixtures glide smoothly without affecting readings. Robust support frames and three‑point levelling preserve the plate’s accuracy across a range of accuracy grades for both workshop and laboratory applications.
1000 x 630 x 100 mm Granite Surface Plate Grade 0, DIN 876/0 - Metav IndustryLine
Benefit from Grade 0 flatness and a massive dark granite construction that delivers reproducible reference measurements and exceptional long‑term stability; the plate is supplied as a control surface only, without a stand. Order the granite surface plate directly via Metav Werkzeuge or ask our consultants for delivery and handling advice. Granite surface plate, 1000 × 630 × 100 mm, Grade 0 — Surface plate for precision inspection A Granite surface plate, 1000 × 630 × 100 mm Grade 0 provides a thermally stable, wear‑resistant reference surface for inspection, layout and assembly tasks in machine shops and tool rooms Grade 0 accuracy (DIN 876/0) Dark granite, wear‑resistant surface 1000 × 630 × 100 mm working area Supplied as plate only, no stand Reliable reference for reproducible inspection A Grade 0 surface on a heavyweight granite slab forms the basis for consistent dimensional control and layout work. The specification Grade 0 (per DIN 876/0) defines the flatness class and ensures that the reference surface meets tight tolerances suitable for high‑precision inspection. With a compact footprint of 1000 × 630 × 100 mm, the slab combines accessibility with a stable measuring plane, while the mass of the component contributes to vibration damping and positional stability during measurements. Built for durability and low maintenance The use of dark granite as the construction material gives the slab long service life under regular workshop conditions. The surface resists wear from contact with gauge blocks and fixtures, reducing the need for frequent resurfacing and allowing inspections to remain reliable over time. Routine cleaning and gentle care preserve the measurement qualities, helping to lower total cost of ownership through extended intervals between maintenance operations. Workshop handling and practical notes The slab is delivered as a control plate only — no stand is included — so planning for a suitable support frame or measuring table is required. With a considerable mass, safe handling and transport arrangements should be arranged in advance to avoid damage and ensure personnel safety. The plate is intended for use as a precision reference in machine shops, quality control areas and toolrooms where stable, reproducible surfaces are required for setting up, inspecting and aligning components. For consistent, workshop‑ready reference surfaces choose the Metav IndustryLine Grade 0 granite surface plate and contact Metav Werkzeuge in Emmerich for delivery coordination and handling guidance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M206.108 Label: Granite surface plate, 1000 x 630 x 100 mm Grade 0 GTIN: 4054469103051 Tariff number: 68022300 Facts Dimensions: 1000 × 630 × 100 mm Weight: 210 kg Grade: 0 (DIN 876/0) Special features Material: dark granite Standard: DIN 876/0 Delivery: plate only, without stand Category: Measuring table FAQ What flatness standard does this surface plate meet? The surface plate fulfils Grade 0 tolerances according to DIN 876/0, offering a high‑precision reference suitable for demanding inspection tasks. Is a stand included with the plate? The plate is supplied as a control surface only and is delivered without a stand; the SKU for this item is M206.108 from Metav IndustryLine. How heavy is the granite plate and what handling is required? The slab weighs 210 kg; appropriate lifting equipment and transport planning are recommended to ensure safe handling and accurate placement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Gauge Rod For Granite Plate With M8 Thread, Ø28x230 Column Ø18x190 Crossarm - Metav IndustryLine
Robust mounting and compact dimensions combine to deliver stable incremental extension for height gauge 208.144. The rod provides a 100 mm measuring range with an M8 mounting thread and a stiff Ø28×230 mm column, ensuring reproducible set-ups and minimal vibration. Order the accessory directly via Metav Werkzeuge or consult the Metav team for configuration advice. Measuring rod M208.143.S – Accessory for 208.144 with 100 mm range and M8 mount (Metav IndustryLine) The Measuring rod M208.143.S is a compact accessory designed to extend the measurement capability of the 208.144 height gauge by 100 mm, offering a stable column and versatile cross arm for precision inspection tasks in workshops and metrology labs. Extends measurement range to 100 mm M8 thread for granite plate mounting Ø28×230 mm column for stable support Ø18×190 mm cross arm for versatile positioning Greater stability for repeatable measurements The extension rod is engineered to provide a stiff support structure, with a Ø28×230 mm main column that reduces deflection during contact measurements. Paired with the Ø18×190 mm cross arm, the configuration maintains alignment for short-range gauging tasks and small assemblies. This construction increases measurement reproducibility, translating into fewer rechecks and a more efficient inspection routine without additional mechanical adaptation. Secure mounting and straightforward integration Mounting uses an M8 thread widely found on granite plates and metrology fixtures, enabling fast integration into existing setups. The threaded connection combined with the rod’s mass of 2.4 kg gives inertia that helps dampen external disturbances during measurement. The simple mechanical interface avoids complex adapters, which reduces set-up time and supports predictable results in production or quality-control environments. Designed for reliable workshop use As an accessory for the 208.144 system, the rod is suited to everyday tasks in machine shops and inspection benches where compact extension and consistent positioning are required. The accessory is classified as a measuring-instrument component and supports modular arrangements, helping to maintain workflow continuity when switching between small workpieces or repeat measurements on the same fixture. Low-maintenance accessory that supports throughput The straightforward mechanical design minimises maintenance needs while delivering consistent performance under regular use. Fewer moving parts mean less adjustment and a smaller risk of cumulative error, so inspection throughput can be increased without compromising data quality. The accessory complements existing metrology assets by delivering predictable mechanical behaviour in short-range gauging tasks. Contact Metav Werkzeuge for tailored advice on integrating the measuring rod M208.143.S with existing 208.144 setups and to arrange prompt supply from Emmerich. Technical data Article number: M208.143.S GTIN: 4054469104942 Label: Measuring rod 208.143 for 208.144 measuring range 100 mm Facts Measurement range: 100 mm Weight: 2.4 kg Cross arm: Ø18×190 mm Column: Ø28×230 mm Special features Mounting thread: M8 Suitable as accessory for measuring device 208.144 Category: Accessory (Measuring instruments) FAQ What measurement range does this accessory provide? The measuring rod offers a 100 mm extension to the measurement capability of the 208.144 system, enabling short-range gauging tasks. Is the rod compatible with granite plate fixtures? Yes. The rod uses an M8 mounting thread compatible with standard granite plate fixings and metrology fixtures. What dimensions contribute to the rod’s stability? Stability is achieved through the Ø28×230 mm column and the Ø18×190 mm cross arm, which together reduce deflection during contact measurements. Which device is this accessory intended for? This accessory is intended for use with the 208.144 measuring device and is supplied as a dedicated extension component (SKU M208.143.S). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200 x 800 x 150 mm Granite Surface Plate Grade 0, DIN 876/0 - Metav IndustryLine
Take advantage of the Grade 0 accuracy and the mass‑stabilised construction to create a reliable inspection baseline that improves reproducibility and reduces rework. The generous 1200 x 800 x 150 mm measuring surface combined with the inherent damping of dark granite provides long‑term stability for bench‑level metrology. Order the granite surface plate directly via Metav Werkzeuge or contact our consultants for integration advice. Granite surface plate 1200 x 800 x 150 mm, Grade 0 — Metav IndustryLine A Granite surface plate 1200 x 800 x 150 mm, Grade 0 serving as a stable inspection and layout reference for metrology laboratories and workshop quality control Grade 0 accuracy to DIN 876/0 Large 1200 x 800 mm measuring surface 150 mm thickness for high rigidity Dark granite construction, vibration-dampening Precision baseline that supports dependable measurements A laboratory‑grade reference surface with Grade 0 tolerance according to DIN 876/0 creates a reproducible zero for dimensional checks and layout tasks. The plate’s specification ensures a flatness band appropriate for high‑accuracy inspection, so height gauges, dial indicators and layout tools perform against a certified geometric reference. Using a dedicated surface plate as the stable datum minimises cumulative errors in assembly checks and reduces the incidence of scrapped parts, offering a measurable quality‑control advantage on the shop floor. Mass and material that improve stability and reduce noise The combination of a heavy body and a dense dark granite material helps suppress vibrations and thermal drift during measurement cycles. With a mass of 450 kg, the plate dampens ambient disturbances and supports repeatable readings across the entire surface. The 150 mm thickness contributes structural rigidity, keeping the traverse deflection low under typical test loads. Together these properties translate into more reliable comparative measurements and fewer retests during process control. Generous working area with workshop practicality The substantial 1200 x 800 x 150 mm measuring surface provides ample room for multi‑point reference tasks, assembly checks and layout marking without frequent repositioning. The plate is supplied as a control plate only, without stand, which allows customers to integrate it into existing benches, stands or instrument tables according to their workflow. The dark, fine‑grained granite resists corrosion and is straightforward to maintain with proper cleaning practices, preserving the measuring surface quality over many years of service. Why a Metav IndustryLine plate adds value to the workshop Choosing a Metav IndustryLine reference surface connects the inspection process with a wider supply and service network focused on accessible precision. The plate is suited to manufacturers and inspection labs that require a dependable metrology baseline without unnecessary extras; its robust design supports a stable production flow and helps maintain traceable measurement routines. If additional configuration advice is needed, Metav’s consultants can recommend suitable fixtures and transport arrangements to match the shop’s handling capabilities. Contact Metav Werkzeuge to discuss delivery options, site suitability and integration of the Metav IndustryLine granite surface plate into the production or inspection workflow. Technical data SKU: M206.109 GTIN: 4054469103082 Label: Granite surface plate, 1200 x 800 x 150 mm, Grade 0 Facts Dimensions: 1200 x 800 x 150 mm Weight: 450 kg Accuracy: Grade 0 (DIN 876/0) Special features Material: dark granite Standard: DIN 876/0 Delivery: control plate only, without stand Tariff number: 68022300 Category: Messtisch FAQ What level of flatness tolerance does this plate provide? The granite surface plate meets Grade 0 flatness tolerances as specified by DIN 876/0, giving a high‑precision reference suitable for laboratory and advanced workshop inspections. Is the granite plate supplied with a support or stand? Delivery comprises the control surface only; the plate is supplied without stand, allowing custom integration into existing benches or specially selected supports. How does the plate’s mass influence measurement stability? The plate’s 450 kg mass increases vibration damping and reduces external disturbance, improving repeatability for comparative and layout measurements across the plate. Can the surface plate be used for layout and as a datum for height gauges? Yes — the large 1200 x 800 mm measuring surface is suitable as a stable datum for height gauges, dial indicators and layout operations in both metrology labs and production inspection. Who manufactures and supplies this surface plate? This unit is offered under the Metav IndustryLine brand and distributed via Metav Werkzeuge; refer to the SKU M206.109 for ordering and specification checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Granite Surface Table 150 x 150 mm With Column Ø22 x 160 mm, Fixed Or Sliding Crossarm, DIN 876/0 - Metav IndustryLine
Take advantage of a DIN 876/0 granite surface and compact footprint to ensure stable, repeatable inspections; the robust Ø22 × 160 mm support column adds reliable rigidity. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Granite measuring table M208.146 — 150 × 150 mm granite plate, Ø22 × 160 mm column (Metav IndustryLine) A Granite measuring table with a precision-ground plate and a sturdy support column, engineered for small-component inspection and bench-top measuring tasks DIN 876/0 granite surface Compact 150 × 150 mm plate Ø22 × 160 mm support column Fixed or adjustable cross arm Stable inspection surface for consistent results The precision-ground granite plate provides a naturally flat and vibration-damping reference that supports repeatable measurements. Specified to DIN 876/0, the surface resists wear and thermal distortion better than metallic tops, so inspection routines remain reliable across shifts. For bench-top use, the 150 × 150 mm working area is optimised to combine reach with minimal footprint, allowing accurate placement of small components without compromising stability. This makes the table suitable for toolrooms, quality-control benches and fine-machining setups seeking low-variation results. Rigidity and setup flexibility that aid measurement precision A rigid Ø22 × 160 mm support column ensures the measuring head and cross arm remain stable during gauging and marking operations. The cross arm is supplied either fixed or adjustable, enabling alignment with diverse workpiece geometries while keeping the datum plane constant. The combination of a solid column and a vibration‑absorbing granite surface reduces measurement scatter, supporting more reliable comparisons and quicker go/no-go decisions during routine inspections. Compact design for bench-top metrology and constrained spaces Designed as a small-format inspection table, the compact granite top balances reach and manoeuvrability for small to medium workpieces. The reduced footprint aids ergonomic placement beside measuring instruments such as height gauges and microscopes, while the mass of the granite contributes to overall steadiness. Where bench space is limited, the small plate size still permits full access for clamping and probing, supporting efficient workflow without the need for large, heavy furniture. Built for workshop integration and process repeatability The table is intended as a stable reference platform within inspection chains and jig-and-fixture setups. Its DIN 876/0 grade surface simplifies traceability and documentation of measurement conditions, while the robust construction supports frequent handling in production environments. Integration into a standard metrology bench is straightforward, and the solid granite top minimises recalibration frequency by resisting knocks and thermal effects that otherwise alter metallic surfaces. For precise, repeatable inspection choose the Metav IndustryLine granite measuring table and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for product guidance and availability Technical Data Article number: M208.146 GTIN: 4054469104980 Manufacturer: Metav IndustryLine Category: Measuring table Data Measurement range: 0–120 mm Plate size: 150 × 150 mm Support column: Ø22 × 160 mm Weight: 2.15 kg Standard: DIN 876/0 Special features Material: granite plate Cross arm: fixed or adjustable Intended use: bench-top inspection and gauging Tariff number: 90173000 FAQ What is the load-bearing material of the inspection surface? The top is a precision-ground granite plate, specified to DIN 876/0 for flatness and stability. Is the support column adjustable and what are its dimensions? The support column measures Ø22 × 160 mm; the cross arm can be supplied fixed or adjustable to suit different set-ups. What measurement range is appropriate for this table? The platform is sized for precision work up to 0–120 mm, making it suitable for small-component inspection tasks. Can the table be used alongside height gauges and microscopes? Yes. The compact 150 × 150 mm plate and rigid column make the table well suited for integration with height gauges and microscopes on a metrology bench. Does the product include calibration documentation? Calibration documentation is not part of the standard specification shown; refer to Metav Werkzeuge for available calibration services and certificates. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Granite Surface Table 300x200 mm With Ø28 mm Column And Ø18 mm Crossarm, DIN 876/0 - Metav IndustryLine
Data inconsistency detected: the product label includes a "150 mm" designation while the supplied technical specification states a measuring range of 0–190 mm. This contradiction affects the correct classification and the resulting product description, so a full, standards‑aligned text cannot be produced until the discrepancy is resolved. Please confirm whether the "150 mm" notation is a model reference or the intended maximum measuring range, and verify the exact plate and column dimensions and the cross‑arm configuration (fixed or movable). Once the correct measuring range and dimensional data are confirmed, a complete description will be prepared that includes the appropriate measuring class, technical data, conformity notes and purchasing guidance. Please provide the clarified specifications to proceed; no assumptions about the product’s range or function have been made.
150 x 100 x 50 mm Granite Surface Table With Ø30x150 Column And 100 mm Articulated Arm, DIN 876/0 - Metav IndustryLine
The combination of a granite top to DIN 876/0, a precise fine adjustment mechanism and a rigid Ø30 × 150 mm column ensures stable, repeatable set-ups for inspection and fixture work. Order the granite measuring table directly via Metav Werkzeuge or ask our consultants for tailored application advice. Granite measuring table 150 x 100 x 50 mm – column Ø30×150, 100 mm arm (M208.150.1) by Metav IndustryLine Granite measuring table 150 x 100 x 50 mm (M208.150.1) offers a compact, stable reference surface for workshop inspection and fixture setup across machining and metrology tasks Granite surface to DIN 876/0 Fine height adjustment for repeatable set-ups Column Ø30 × 150 mm for robust support 100 mm measuring arm for localised reach Stability and reproducible reference for precision work A solid granite plate specified to DIN 876/0 provides a thermally stable, wear‑resistant measuring surface that minimises deformation under load. The top dimension of 150 × 100 mm gives a compact but usable work area that is easy to position on benches or inspection stands; combined with the overall mass of the assembly, the result is reduced vibration and improved measurement repeatability. Such a foundation is especially beneficial where fine tolerances must be verified without elaborate fixturing. Accurate positioning and controlled adjustment The integrated fine adjustment allows slow, controlled vertical movements of the measuring arm, permitting delicate alignment and precise approach to a measurement target. The Ø30 × 150 mm column delivers axial stiffness and secure guidance, while the 100 mm measuring arm gives the reach needed for local inspections and setting tasks without sacrificing rigidity. These elements together support a workflow where setup time is reduced and measurement variance from operator handling is minimised. Workshop integration and practical benefits Designed for use in machine shops, inspection benches and assembly fixtures, the unit's compact footprint supports flexible placement and straightforward handling. The modest overall weight aids relocation between workstations while retaining the stability required for accurate checking. Supplied as a straightforward measuring assembly, it suits routine quality assurance, small‑batch inspection and fixturing tasks where a reliable, flat reference is essential. Contact Metav Werkzeuge for an individual specification check or a quotation from our Emmerich warehouse to ensure this granite measuring table fits the intended application Technical data Article number: M208.150.1 GTIN: 4054469151540 Category: Messtisch Core dimensions & figures Table top: 150 × 100 × 50 mm Measurement range: 0–100 mm Column: Ø30 × 150 mm Measuring arm reach: 100 mm Weight: 6 kg Standard: DIN 876/0 Materials & special features Surface material: granite plate Fine adjustment: yes Aufnahme: 8 Ausladung: 85 FAQ What measurement range does the granite measuring table cover? The measuring table covers a range of 0–100 mm and is classed for standard workshop measurement tasks with localised reach provided by the 100 mm measuring arm. Is the surface specification conformed to a recognised standard? Yes, the granite top is manufactured to DIN 876/0, providing a verified flat, stable reference surface for inspection and setting work. Does the unit include a fine adjustment mechanism? The assembly includes a fine adjustment feature to enable controlled vertical movement of the measuring arm for repeatable positioning. Which applications is this unit best suited for? The device is suitable for machine‑shop inspection, fixture set‑ups and quality assurance tasks where a compact, stable reference surface and short measurement reach are required. Can the granite measuring table be moved between benches? At approximately 6 kg it is compact enough for relocation between workstations while maintaining the mass needed for measurement stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Granite Surface Plate 200x150x50mm With Ø30x200mm Column And 100mm Measuring Arm, DIN 876/0 - Metav IndustryLine
Take advantage of the combination of DIN 876/0 flatness, a 200 x 150 x 50 mm granite plate and an adjustable Ø30 x 200 mm column with fine adjustment for a reliable bench-top reference that speeds up inspection and set-up tasks. Order the M208.150.2 directly via Metav Werkzeuge or request specialist advice for immediate availability and delivery. M208.150.2 Granite Surface Plate — 200 x 150 x 50 mm plate with Ø30 x 200 mm column and 100 mm measuring arm (Metav IndustryLine) The M208.150.2 Granite Surface Plate is a compact inspection table designed as a stable reference plane for precision measuring and layout work in workshop and inspection environments. Granite plate 200 x 150 x 50 mm Accuracy class DIN 876/0 Ø30 x 200 mm support column 100 mm adjustable measuring arm Stable reference plane for reliable quality control A precision granite plate with the dimensions 200 x 150 x 50 mm provides a consistent, flat surface for layout and inspection. Certified to DIN 876/0, the table functions as a trusted reference for comparative and dimensional checks, helping to reduce rework and inspection variability. The overall unit weight of 8 kg keeps the assembly bench‑portable yet stable under standard workshop conditions, making it a practical choice for production control and tool set‑up tasks. The compact footprint is optimised for benches where space and repeatability are priorities. Flexible set-up with fine adjustment for accurate positioning The integrated Ø30 x 200 mm column and 100 mm measuring arm allow secure mounting and precise positioning of dial indicators, sensors or small fixtures. A built‑in fine adjustment mechanism enables micro‑positioning without the need for repeated manual tweaks, speeding up alignment and gauge set-up. This arrangement supports a variety of inspection workflows: the articulation provided by the arm simplifies transfer measurements and comparative checks while maintaining a stable reference from the granite plane. Compact design tailored for workshop efficiency With a measurement range of 0–150 mm, the unit covers everyday inspection tasks while remaining easy to handle and store. The design is tailored to provide the best compromise between reach and rigidity for bench‑top metrology: the modest plate size and column allow one‑person handling and fast deployment across different workstations. As part of Metav IndustryLine, this surface plate supports straightforward integration into small inspection cells and quality benches, offering dependable performance where space and usability matter. Contact Metav Werkzeuge for availability, delivery options from Emmerich and expert advice on integrating the M208.150.2 into existing inspection workflows Technical data Article number: M208.150.2 GTIN: 4054469151557 Category: Messtisch Material: Granite plate Weight: 8 kg Tariff number: 90173000 Core dimensions and range Plate dimensions: 200 x 150 x 50 mm Measurement range: 0–150 mm Column: Ø30 x 200 mm Measuring arm length: 100 mm Features Accuracy class DIN 876/0 Fine adjustment Compact bench‑top design Intended for inspection and layout work FAQ How flat is the surface and what standard applies? The plate meets DIN 876/0, providing a high‑precision flat reference plane suitable for routine inspection and layout use. Does the unit include fine adjustment for the measuring arm? Yes, the assembly features a fine adjustment mechanism on the column and arm to allow precise positioning during set‑up. What are the external dimensions of the plate and the weight for handling considerations? The granite plate measures 200 x 150 x 50 mm and the complete unit weighs 8 kg, enabling bench‑top use and straightforward handling. Which measurement range is supported by the table assembly? The indicated measurement range is 0–150 mm, covering common bench inspection and gauge set‑up tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150x150x40 mm Granite Plate With 1x M8 Thread, DIN 876/0 - Metav IndustryLine
Take advantage of a compact, DIN 876/0 reference surface that combines stable dark granite construction with a standard M8 mounting thread for reliable fixture integration; order via Metav Werkzeuge or consult the Metav team for specification advice and delivery from Emmerich. Granite Plate 150 x 150 x 40 mm (DIN 876/0) with M8 Mounting — Metav IndustryLine The Granite Plate 150 x 150 x 40 mm (DIN 876/0) provides a compact, thermally stable reference surface for workshop and laboratory measurements, designed for use with standard M8 instrument stands. High-stability dark granite construction DIN 876/0 accuracy class reference surface Integrated 1x M8 mounting thread Repeatable measurements from a rigid reference surface Manufactured from dark granite, this compact reference surface is intended to deliver repeatable measurement results in inspection work and fixture set-up. The 150 x 150 x 40 mm footprint and 3.5 kg mass create a balance between portability and stability, making the plate suitable for bench‑top use where a flat, low‑wear surface is required. Conformance to DIN 876/0 signals that the surface meets recognised flatness and quality criteria, which supports consistent datum establishment and reduces setup time in routine workflows. Simple integration with stands and inspection rigs An integrated 1x M8 thread allows direct attachment to common measuring stands and fixtures without additional adapters, simplifying alignment of probes, indicators and microscopes. The threaded interface follows standard practice for instrument mounting, so the plate can be incorporated into existing test jigs or rolled into modular inspection stations with minimal fuss. This practical compatibility shortens assembly time and helps maintain a stable datum across repeated checks. Durable material benefits for everyday use Granite offers inherent advantages for metrology: wear resistance, low thermal expansion and passive vibration damping, all of which contribute to more reliable readings over time compared with softer surfaces. The plate’s material choice and compact dimensions make it well suited to routine quality checks, optical alignment tasks and small-assembly inspection, where a controlled reference plane improves process reliability and reduces rework. Choose the Metav IndustryLine granite plate for compact, standardised reference surfaces and contact Metav Werkzeuge for expert advice and supply from Emmerich. Technical Data Article number: M206.111 GTIN: 4054469103136 Category: Messtisch Facts Dimensions: 150 x 150 x 40 mm Weight: 3.5 kg Tariff code: 68022300 Special features Material: dark granite Mounting thread: 1x M8 Standard: DIN 876/0 FAQ What degree of flatness does this plate provide? The Granite Plate 150 x 150 x 40 mm is manufactured to DIN 876/0, which defines the plate as a high‑grade reference surface suitable for workshop and laboratory measurement tasks. Can the plate be mounted to a measuring stand? Yes, the plate features an M8 mounting thread designed for direct attachment to standard instrument stands and inspection rigs, allowing quick and secure integration. Is the material suitable for daily workshop use? The dark granite construction offers wear resistance and low thermal expansion, making the plate appropriate for regular quality checks and fixture set‑ups where dimensional stability matters. How portable is the reference surface for bench‑top work? With dimensions 150 x 150 x 40 mm and a weight of 3.5 kg, the reference surface is compact enough for bench‑top portability while providing the mass needed for a stable measuring base. Does the product include any protective case or special packaging? Standard delivery details are provided with the plate; consult Metav Werkzeuge for information on transport packaging options and any special handling recommendations for larger orders. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160mm Granite Surface Table 250x160x50 With Column Scale, DIN 876/0 - Metav IndustryLine
Take advantage of a stable granite reference, a scaled column for repeatable vertical positioning, and an integrated fine adjustment to speed up setup and increase measurement reliability; order the table directly via Metav Werkzeuge or consult their specialists for configuration advice. M208.148 — Metav IndustryLine Granite Measurement Table with Scaled Column (250×160×50 mm) The M208.148 is a granite measurement table designed for workshop metrology, offering a flat granite surface and a scaled column to support repeatable height settings and precise fixturing. Granite surface plate 250×160×50 mm Scaled column for repeatable vertical positioning Fine adjustment for micro alignment Complies with DIN 876/0 flatness class Stable reference surface for reproducible results A heavy granite surface provides a thermally stable and vibration-damping reference that minimises measurement drift during routine checks. The 250×160×50 mm plate offers a flat, wear-resistant base that supports gauges, jigs and small assemblies with high stability. Compliance with DIN 876/0 indicates the flatness class and gives a verifiable benchmark for quality control, helping to reduce uncertainty in repeat inspections and to maintain traceable results in the workshop. Precise vertical positioning with a scaled column and fine adjustment The integrated scaled column (Ø35×220 mm) allows for fast, repeatable vertical alignment of fixtures and measuring heads, while the cross arm (Ø20×25.5 mm) supports compact probe holders or indicators. The built-in fine adjustment enables micro-positioning without the need for constant re-clamping, so setups are faster and less prone to human error. With a measuring range of 0–160 mm, the assembly suits common bench-top metrology tasks where controlled vertical travel and repeatability are essential. Practical handling and workstation benefits With a compact footprint and a robust granite base, the table is easy to incorporate into test benches and assembly stations. The surface geometry simplifies reference transfers and alignment tasks, reducing secondary operations during inspection. The combination of granite surface and a scaled column makes the unit particularly useful for toolrooms, small-batch production monitoring and incoming inspection, where quick, reproducible set-ups lower cycle times and increase throughput. Conformance to standards and typical applications Built to the recognised flatness class DIN 876/0, this measuring table is suitable for precision layout, small-part inspection and fixture set-up in mechanical workshops and quality departments. The construction supports repeatable comparison measurements, gauge checks and positional verification tasks. As a Metav IndustryLine product, the unit complements a broader range of metrology accessories and mounting options, helping to standardise measuring practices across the shop floor. For dependable shop-floor metrology, choose the Metav IndustryLine M208.148 granite measurement table and contact Metav Werkzeuge in Emmerich for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M208.148 GTIN: 4054469105017 Material: Granite plate Surface dimensions: 250×160×50 mm Measuring range: 0–160 mm Standard: DIN 876/0 Special feature: Scaled column Facts Column diameter × usable length: Ø35×220 mm Cross arm diameter: Ø20×25.5 mm ECLASS: 21170604 Special features Fine adjustment for micro positioning Scaled column for repeatable vertical setup Granite surface plate for thermal stability and vibration damping Conforms to DIN 876/0 Brand: Metav IndustryLine FAQ What is the usable vertical travel on the table? The M208.148 offers a measuring range of 0–160 mm, enabling controlled vertical travel for a variety of bench-top inspection and fixturing tasks. Is the surface accuracy certified? The table is manufactured to meet DIN 876/0 flatness class, which provides a clear standard for surface accuracy and ensures the granite base is suitable for repeatable reference measurements. Can the table be used for mounting dial indicators or small probes? Yes. The scaled column and cross arm support common indicator mounts and compact probe holders, while the fine adjustment facilitates precise positioning without repeated re-clamping. Which workshop tasks suit this measurement table best? The M208.148 is ideal for toolroom layout, small-part inspection, repeat gauge checks and fixture set-ups where a stable granite reference and repeatable vertical positioning improve workflow efficiency. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Granite Surface Plate 300x200x50mm With 30mm×245mm Column And 100mm Arm, DIN 876/0 - Metav IndustryLine
Granit construction combined with a slim, adjustable column and a compact measuring arm delivers a stable, workshop-ready reference surface; benefit from precise set-up, reliable flatness and a small footprint for routine inspection. Order directly via Metav Werkzeuge or consult the team for application advice. Granite surface table M208.150.3 – granite surface table, 300 x 200 x 50 mm, Ø30 mm column Granite surface table M208.150.3 offers a compact, durable reference surface for inspection, assembly and gauging tasks in machine shops and quality control environments Granite plate 300 x 200 x 50 mm Ø30 mm column with fine adjustment 100 mm measuring arm, 85 mm reach Engineered flatness for consistent reference measurements The granite plate is manufactured to the DIN 876/0 class, providing a stable, low-wear surface for repeatable measurements and fixture work. Granite resists thermal distortion and surface wear better than many metals, which keeps reference planes consistent over long service intervals. For workshop use, this means less rework: parts can be referenced and aligned directly on a surface that preserves flatness under normal shop conditions. The solid plate thickness also dampens vibration, improving the quality of comparative checks and visual inspections. Adjustable column and arm for precise, repeatable positioning An Ø30 x 250 mm column with fine adjustment and a 100 mm measuring arm permit controlled vertical and lateral set-up of gauges or probes. The arm reach of 85 mm (ausladung) and the compact mounting arrangement make the table suited to small-to-medium components while maintaining a low centre of gravity. The unit’s mass (approx. 12 kg) contributes to rigidity during tactile or contact checks. These attributes reduce setup time and minimise measurement scatter, enhancing throughput in routine inspection tasks where repeatability matters most. Practical design tuned to shop workflows and inspection benches Built for everyday metrology, the table’s 300 x 200 x 50 mm working area fits bench-top installations without sacrificing useful measuring space. The combination of a durable granite surface and an adjustable column supports a range of tasks from visual inspection and runout checks to fixture set-up and small-assembly alignment. The compact footprint and robust construction make the table an efficient choice for production lines, toolrooms and R&D benches where a reliable datum plane is required alongside easy repositioning and stable clamping capability. Choose the Metav IndustryLine granite surface table for a robust, space-efficient reference system and contact Metav Werkzeuge for ordering and detailed application guidance. Technical data Article number: M208.150.3 GTIN: 4054469151564 Weight: 12 kg Material: Granite plate Standard: DIN 876/0 Numbers / Core technical data Plate dimensions: 300 x 200 x 50 mm Column: Ø30 x 250 mm Measuring arm: 100 mm Reach (ausladung): 85 mm Mounting / Aufnahme: 8 Measuring range: 0–200 mm Special features / Versions Fine adjustment included Compact bench-top footprint Suitable for inspection, alignment and assembly tasks Metav IndustryLine product family FAQ What flatness class does this table meet? The granite surface table M208.150.3 is specified to DIN 876/0, which denotes a high flatness class suitable for general workshop and inspection tasks. Can the column be adjusted precisely for repeatable set-ups? Yes, the Ø30 x 250 mm column on the M208.150.3 includes a fine adjustment feature to aid repeatable positioning of gauges and fixtures. Is the surface plate suitable for routine shop use and small assemblies? The granite plate (300 x 200 x 50 mm) on the M208.150.3 is designed for workshop conditions, offering wear resistance and thermal stability for routine inspection and assembly work. What is the usable reach of the measuring arm and how does it affect applications? The measuring arm provides a 100 mm span with an 85 mm lateral reach, allowing positioning over small to medium components while keeping the datum close to the plate for stable checks. Does the table require a special mounting or heavy-duty bench? The M208.150.3 is bench-compatible thanks to its compact footprint and approximately 12 kg mass; it is suitable for standard inspection benches without special foundations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200x150 mm Granite Surface Table With Ø22x180 mm Column, Ø18x140 mm Cross Arm, DIN 876/0 - Metav IndustryLine
Take advantage of a precision granite base, a compact 200 x 150 mm working surface and an adjustable cross arm for accurate, repeatable inspections; order the measurement table directly via Metav Werkzeuge or consult the sales team for configuration advice. Measurement table with granite plate M208.145 — 200 x 150 mm granite base, DIN 876/0 The Measurement table with granite plate M208.145 offers a compact, rigid inspection platform for workshop measurement tasks and small‑part fixture work Granite plate to DIN 876/0 precision Compact 200 x 150 mm working surface Cross arm fixed or movable Column diameter Ø22 mm for rigid support Stable foundation for reproducible measurements A natural granit surface provides thermal stability and vibration damping that metal bases cannot match; this ensures low drift during successive checks. The plate conforms to DIN 876/0, which denotes a high flatness grade and a reliable reference plane for visual inspection, dial indicator checks and optical comparators. Specified flatness reduces setup uncertainty and shortens the time spent compensating for surface irregularities, delivering measurable gains in process reliability. Compact layout that fits the workshop flow The 200 x 150 mm working surface combines a small footprint with practical reach, ideal for bench‑level inspection and assembly tasks where space is at a premium. The instrument supports a measurement range of 0–130 mm, while the cross arm (Ø18 x 140 mm) is available either fixed or movable to position probes or gauges precisely over the workpiece. The column diameter Ø22 mm gives a stable bearing for the arm, and the table’s modest mass of 2.15 kg allows relocation between stations without specialized handling equipment. Built for inspection, fixture mounting and repeat checks Designed as a stable datum for quality control, the platform suits tasks such as runout checks, small‑part alignment, gauge zeroing and comparative measurement. The granite surface accepts clamping fixtures and magnetic or mechanical holders used in metrology benches, while the cross arm facilitates off‑centre measurements without complex fixturing. In production and repair shops where repeatability and throughput matter, this measurement table reduces setup variation and helps standardise inspection routines — an efficient option for integration into existing measuring processes. Contact Metav Werkzeuge GmbH for specification checks and delivery options for the M208.145 measurement table — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply arrangements Technical data Article number: M208.145 GTIN: 4054469104966 Customs tariff number: 90173000 Measurements Plate size: 200 x 150 mm Measurement range: 0–130 mm Weight: 2.15 kg Cross arm: Ø18 x 140 mm Column diameter: Ø22 mm Special features Material: granite plate Flatness standard: DIN 876/0 Cross arm: fixed or movable Category: measurement table (Messtisch) FAQ What flatness standard does the granite plate meet? The granite plate complies with DIN 876/0, providing a high flatness grade suitable for reference measurements and repeatable inspection tasks with the M208.145 measurement table. What is the usable working area and measurement range? The working surface is 200 x 150 mm and the instrument supports a measurement range of 0–130 mm, making it suitable for small to medium inspection tasks. Is the cross arm adjustable? The cross arm can be supplied fixed or movable (querarm fest oder verschiebbar) to allow flexible probe positioning for off‑centre or interior measurements. Can the measurement table be used for fixture mounting and indicators? Yes, the granite surface and cross arm are designed to accept common metrology fixtures and indicator holders for comparative checks and alignment work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200x150x50mm Granite Plate With 1x M8 Thread, DIN 876/0 - Metav IndustryLine
The stable combination of dark granite construction and DIN 876/0 flatness delivers a durable, low-maintenance measuring base with integrated mounting; order the granite plate directly via (Metav Werkzeuge) or ask our consultants if needed. Granite plate M206.115 — Compact DIN 876/0 surface plate with 1×M8 mounting thread (Metav IndustryLine) The Granite plate M206.115 serves as a compact, high-stability surface plate for workshop inspection, fixture set-up and comparator work, supplied to the DIN 876/0 accuracy class and fitted with a central M8 thread for secure attachment to indicator stands. DIN 876/0 accuracy class Compact 200 x 150 x 50 mm size Dark granite resists wear and thermal drift Integrated 1×M8 mounting thread Stable base for repeatable measurements A surfaced measuring base made from dark granite gives excellent thermal stability and natural damping, which reduces the impact of shop-floor disturbances on sensitive readings. The 200 x 150 x 50 mm footprint and substantial mass provide a secure platform for dial indicators and small fixtures, while the DIN 876/0 classification documents the flatness standard that underpins reliable comparative measurements. These attributes make the plate suitable for quality checks and setup tasks where consistent reference across repeated cycles is essential. Secure mounting and practical workshop use Fitted with an 1×M8 threaded mounting point, the plate accepts common indicator stands and holding devices directly, enabling a compact, repeatable arrangement of gauge and part. The thread location and the plate’s rigid body reduce relative motion between instrument and workpiece, improving measurement repeatability. The material's resistance to abrasion keeps functional surfaces intact with minimal upkeep, so routine cleaning and gentle handling are usually sufficient to preserve performance over years of typical workshop use. Why this surface plate improves day-to-day workflows Built as part of the Metav IndustryLine range, the plate offers a pragmatic balance of precision, robustness and space economy for machine shops and inspection benches. The relatively low maintenance of granite and the clear compliance with DIN 876/0 support efficient inspection cycles and reduce downtime related to reference drift. For operations seeking a dependable small-format surface plate that integrates easily into existing gauge setups, this solution represents a compact, long-lived measuring base that prioritises reproducible results. Choose the Metav IndustryLine granite plate for a dependable measuring foundation — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M206.115 GTIN: 4054469181264 Manufacturer: Metav IndustryLine SKU: M206.115 Facts Dimensions: 200 x 150 x 50 mm Weight: 9.4 kg Thread: 1×M8 Standard: DIN 876/0 Tariff code: 68022300 Special features Material: dark granite Central mounting thread for indicator stand Compact surface plate for workshop use Durable and wear-resistant surface FAQ What tolerance or flatness class does this surface plate meet? The plate meets the DIN 876/0 flatness specification; the Metav IndustryLine granite plate M206.115 is supplied to that standard for consistent reference measurements. Can the plate be mounted to an indicator stand? Yes, the product includes a central 1×M8 mounting thread for direct attachment of indicator stands and comparable fixtures, enabling secure setups. Is the granite surface suitable for heavy workshop environments? The dark granite construction of the Metav IndustryLine surface plate resists abrasion and offers good thermal stability, making it appropriate for standard workshop inspection and setup tasks with normal handling precautions. How large and heavy is the plate for bench allocation? The measuring base measures 200 x 150 x 50 mm and weighs 9.4 kg, providing a compact yet stable footprint for bench or cabinet placement. Does the plate require special maintenance or calibration on delivery? The granite surface requires only routine cleaning; calibration details are standard for the product. For specific calibration documentation requests, consult Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Granite Surface Table 300x200mm Plate, Column Ø25mm, DIN 876/0 - Metav IndustryLine
Take advantage of a stable granite reference surface, a compact 300 x 200 mm plate and a rigid column to secure repeatable measurements and streamlined inspection workflows; order the granite measuring table directly via Metav Werkzeuge or ask our consultants if needed. Granite measuring table M208.149 — granite surface plate with Ø25 mm column and DIN 876/0 accuracy A compact granite measuring table designed for workshop metrology and small‑batch inspection tasks, combining a 300 x 200 mm reference surface with a rigid column support for repeatable positioning and measuring ranges up to 0–250 mm Granite plate 300 x 200 mm DIN 876/0 flatness accuracy Column Ø25 mm, 300 mm height Stable 14.1 kg base mass Dependable reference plane for accurate shop measurements The granite plate offers a thermally stable, wear‑resistant reference surface that minimises deformation under typical workshop conditions. Conforming to DIN 876/0, the top face provides a defined flatness class suitable for calibre checks, small jig alignment and component inspection. With a compact footprint of 300 x 200 mm and a substantial mass of 14.1 kg, the table resists vibration and local loading—so measurements remain consistent without elaborate fixturing. The 0–250 mm measuring range supports a broad set of routine checks while keeping the assembly highly manoeuvrable on a bench or inspection table. Rigid support and practical reach for fixture mounting A solid column with a Ø25 mm shaft and 300 mm effective height secures measuring heads, dial gauges or other instruments at a reproducible position. The lateral reach, given by a 120 mm cross arm and effective projection, permits placements for comparative and height checks without intrusive setup changes. This mechanical arrangement reduces setup time and ensures that repeat measurements are taken from the same datum, which increases throughput in production sampling and quality control tasks. The design emphasises mechanical stability and simple integration with common test equipment used in machine shops. Optimised for everyday metrology and workshop reliability Constructed to serve as a dependable inspection base, the unit supports quick transitions between tasks and tolerates the demands of a busy workshop environment. The granite surface resists coolant and most shop contaminants, simplifying maintenance and preserving the DIN 876/0 flatness over time. Identifiable as model M208.149, the table suits bench‑level quality assurance, incoming inspection of small components and jigs, where a compact, flat and stable surface speeds up decision making and reduces rework. The overall specification focuses on measurable benefits: reproducible measurements, low upkeep and robust handling characteristics. Contact Metav Werkzeuge to discuss how the M208.149 granite measuring table fits existing inspection routines or to arrange procurement from our Emmerich distribution centre. Technical Data SKU: M208.149 GTIN: 4054469105024 Weight: 14.1 kg Material: Granite plate Standard: DIN 876/0 Core measurements Plate size: 300 x 200 mm Measuring range: 0–250 mm Column: Ø25 x 300 mm Cross arm (querarm): 120 mm Projection (Ausladung): 115 mm Aufnahme: 8 Design & features Stable granite reference surface Rigid column support for measuring heads Compact footprint for bench use Workshop‑suitable mass for vibration damping FAQ What flatness standard does this granite measuring table meet? The granite measuring table conforms to DIN 876/0, delivering a defined flatness class appropriate for routine shop inspection and reference checks using the M208.149. Which plate dimensions and weight should be expected? The unit has a 300 x 200 mm granite plate and a mass of 14.1 kg, providing a compact yet stable reference suitable for bench‑level metrology. Can the column accommodate common dial gauges and test probes? Yes; the Ø25 mm column with a 300 mm effective height is intended to accept standard mounts and measuring heads typically used in workshop inspection setups. For which measuring range is the table designed? The specification lists a measuring capability of 0–250 mm, matching small component inspection and fixture checks where a compact reference surface is advantageous. Which applications are best suited to this model? The M208.149 is well suited for component inspection, jig and fixture alignment, incoming part checks and routine quality control tasks that require a compact, stable reference surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Granite Surface Plate Grade 0 DIN 876/0, Dark Granite, 50mm Thick - Metav IndustryLine
Take advantage of the combination of Grade 0 flatness, durable dark granite and a compact 300 × 300 × 50 mm footprint for a stable, low‑vibration reference surface; order the plate directly via Metav Werkzeuge or ask our consultants for application advice. Granite plate, 300 x 300 x 50 mm Grade 0 — precision granite surface plate by Metav IndustryLine The Granite plate, 300 x 300 x 50 mm Grade 0 is a compact precision reference surface designed for inspection, layout and calibration tasks in workshops and quality laboratories Grade 0 flatness per DIN 876 Dimensions 300 × 300 × 50 mm Mass 14 kg for vibration damping Stable reference for reliable dimensional checks The compact surface plate offers a true reference plane thanks to its Grade 0 specification, which denotes the highest flatness tolerance under DIN 876/0. For bench‑level quality control and tooling checks, a consistent datum plane is essential: the dark granite composition provides thermal stability and low wear, keeping the working surface unchanged over long periods. The substantial mass and stiffness reduce the influence of ambient vibrations, so measurements and layouts remain repeatable even in a busy workshop environment. Built for practical workshop handling and longevity At 300 × 300 × 50 mm and approximately 14 kg, this plate balances reach and manageability: wide enough for many small to medium components, yet compact for one‑person handling and safe storage. The natural stone surface resists scratching and is simple to keep clean, supporting precise probes and marking operations. Note that this item is supplied as a control plate only, without a frame or stand, making it suitable for integration into existing benches, stands or inspection jigs where a bespoke mounting solution is preferred. Easy integration into inspection workflows and fixtures The plate’s compact footprint and consistent material properties make it straightforward to use as a datum for visual inspection, scribing, or as a base for small fixtures. The robust granite surface minimises thermal expansion compared with many metallic plates, improving measurement stability across temperature changes. For traceable quality routines, the clear designation to DIN 876/0 simplifies documentation and acceptance criteria in quality records, while the solid construction supports repeated clamping and probing without notable deformation. For a reliable, workshop‑ready granite surface plate from Metav IndustryLine, contact Metav Werkzeuge to arrange supply and technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M206.102 GTIN: 4054469102931 Label: Granite plate, 300 x 300 x 50 mm Grade 0 Facts Dimensions: 300 x 300 x 50 mm Weight: 14 kg Standard: DIN 876/0 Tariff number: 68022300 Special features Material: dark granite Note: control plate only, without frame Category: Messtisch (measurement table) FAQ What tolerance class does this plate meet? The plate meets Grade 0 flatness according to DIN 876/0, providing a high‑precision reference surface suitable for demanding inspection tasks. Is the granite plate supplied with a stand or frame? The delivery includes the plate only; the item is a control plate without a frame or stand, allowing integration with existing fixtures or bespoke mounting solutions. How heavy is the plate and how does that affect use? Weighing approximately 14 kg, the plate offers good mass for vibration damping while remaining manageable for bench use and one‑person handling. Can the surface plate be used for calibration work? The plate’s Grade 0 flatness and DIN 876/0 designation make it appropriate as a reference surface in calibration routines, subject to the laboratory’s traceability and documentation procedures. What material is the plate made from and what are the benefits? Manufactured from dark granite, the plate provides low thermal expansion, high wear resistance and a stable measuring plane for long‑term use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x200x50 mm Granite Plate With 2x M8 Thread, DIN 876/0 - Metav IndustryLine
A compact, stable reference surface with DIN 876/0 flatness and two M8 mounting threads ensures reproducible inspection results; the 300 × 200 × 50 mm format combines sufficient working area with manageable handling thanks to its 9.4 kg mass. Order the item directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Granite Plate M206.112 — 300 × 200 × 50 mm with 2 × M8 threads A granite plate designed as a flat reference surface for inspection, fixture set-up and precision measuring tasks in workshops and quality departments. Flat reference surface DIN 876/0 2x M8 threaded mounting holes Dark granite for thermal stability 300 × 200 × 50 mm working area Stable reference surface for reliable measurements This plate delivers a flat, wear‑resistant reference that supports repeatable dimensional checks and assembly inspections. The surface class DIN 876/0 indicates a high flatness standard suitable for most workshop and inspection tasks; it reduces measurement scatter and the need for repeated checks, improving throughput in quality control. Made from dark granite, the slab offers low thermal expansion and good vibration damping, which keeps readings consistent during routine use. Built for integration with stands and fixtures Two M8 threaded holes are provided for secure attachment of measuring posts, clamps or small fixtures, enabling quick integration into existing test benches. The threaded mounting option simplifies alignment of gauges and probes, making this reference surface a practical base for height gauges, dial indicators and small coordinate measuring setups. The combination of a rigid support and fixed mounting points reduces set‑up time and improves positional stability during inspection. Workshop practicality: size, weight and durability At 300 × 200 × 50 mm and approximately 9.4 kg, this plate balances portability and stiffness: compact enough for bench use yet heavy enough to resist easy displacement during handling. The material choice grants excellent surface hardness and wear resistance, so routine cleaning with a soft cloth and light solvent keeps the plate ready for measurements. Its dimensions make it a versatile messtisch solution for small to medium components where a dependable reference area is required. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine granite plate into measurement workflows and arranging prompt delivery from Emmerich. Technical Data Article number: M206.112 Dimensions: 300 x 200 x 50 mm Material: dark granite Mounting thread: 2x M8 Standard: DIN 876/0 Weight: 9.4 kg GTIN: 4054469103143 Tariff number: 68022300 Facts Surface flatness class: DIN 876/0 Working area: 300 × 200 mm Thickness: 50 mm Weight in kg: 9.4 Special features Two M8 threaded holes for attachments Dark granite with high thermal stability Suitable as a reference surface for inspection Category: Messtisch / measuring table Manufacturer SKU: M206.112 FAQ What flatness standard does the plate meet? The plate complies with DIN 876/0, providing a high flatness class suitable for routine inspection and workshop metrology with the Metav IndustryLine granite plate (M206.112). Can measuring stands be mounted directly to the plate? Yes, the two M8 threaded holes permit direct attachment of measuring posts and small fixtures, allowing stable integration of height gauges and dial indicators. Is the surface suitable for optical and tactile probes? The dark granite surface is appropriate for both tactile probes and many optical checks because of its low reflectivity and long‑term dimensional stability. How should the plate be cleaned and maintained? Clean with a soft, lint‑free cloth and mild solvent if required; avoid abrasive tools. Regular light maintenance preserves the wear resistance and flatness of the reference surface. Is the plate appropriate for portable bench use? With its 300 × 200 × 50 mm format and weight of about 9.4 kg, the plate is designed for bench use where a compact yet stable reference surface is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x200x50 mm Granite Surface Plate With 6x M8 Top And 4x M10 Bottom, DIN 876/0 - Metav IndustryLine
Take advantage of a stable, DIN-classed reference surface combined with versatile threaded mounting for reliable measurement and fixturing; order the plate directly via Metav Werkzeuge or consult our advisers for integration into existing inspection setups. Granitplatte, 300x200x50 mm — Granite surface plate (DIN 876/0) with threaded mounts by Metav IndustryLine Granitplatte, 300x200x50 mm is a compact, high-accuracy granite surface plate designed as a stable reference for inspection, assembly and fixture alignment in workshops and small inspection bays. DIN 876/0 accuracy class Dark granite for thermal stability 300 x 200 x 50 mm working surface Threaded mounts: 6x M8 & 4x M10 Consistent reference surface for repeatable measurements A calibrated granite surface provides a durable and stable base for everyday metrology tasks. The 300 x 200 x 50 mm working area balances reach and stiffness, making the plate suitable for bench-top inspection and small-assembly jigs. The dark granite raw material reduces thermal distortion compared with many metallic alternatives, which helps maintain reproducible results across typical workshop temperature fluctuations. With a nominal mass of 10 kg, the plate sits securely on a bench, resisting unwanted movement during tactile probing or comparative gauging. The DIN 876/0 classification signals a high flatness standard, so components and gauges rest on a predictable, low-wear surface that supports efficient process control. Integrated mounting for modular workflows Threaded connections simplify fixture layout and the attachment of stands or locating elements: this plate features 6x M8 and 4x M10 thread options, allowing direct mounting of inspection stands or bespoke clamps without additional adapters. The built-in thread pattern supports repeatable set-ups, reducing set-up time and minimising stack-up errors when swapping parts or fixtures. For production environments where throughput and reproducibility are priorities, the threaded configuration facilitates fast transfer between measuring tasks and downstream operations, improving workflow efficiency and reducing machine downtime. Practical quality and workshop integration The compact format and robust composition make this plate a practical choice for inspection benches, test rigs and assembly fixtures where space and accuracy matter. The granular surface resists routine wear and provides a reliable datum for comparative checks, layout work and small-part inspection. Supplied under the Metav IndustryLine range, the plate benefits from Metav’s positioning as a precision partner for trades and industry — an offer supported by local European stock and a service rationale that combines product availability with application advice. Where a stable, DIN-classed reference is required, this surface plate gives measurable gains in repeatability and confidence during everyday inspection tasks. For application advice or to secure the Metav IndustryLine granite surface plate for integration into an inspection bench, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com — our advisers can recommend mounting options and delivery details Technical Data Article number: M206.116 GTIN: 4054469183510 Manufacturer: Metav IndustryLine Material: dark granite Norm: DIN 876/0 Core data Dimensions: 300 x 200 x 50 mm Weight: 10 kg Threading: 6x M8 (top) and 4x M10 (bottom) SKU: M206.116 Special features High-accuracy surface plate (DIN 876/0) Threaded mounting for stands and fixtures Compact, bench-top format for workshop use FAQ What level of flatness does this plate offer? The plate is specified to DIN 876/0, indicating a high flatness class suitable for precise reference tasks in inspection and assembly. Can the plate be mounted to inspection stands or fixturing systems? Yes — the plate includes 6x M8 and 4x M10 threaded interfaces designed to accept inspection stands, clamps and custom fixture elements. Is the plate suitable for portable use or stationary benches? With dimensions 300 x 200 x 50 mm and a mass of 10 kg, the plate is optimised for stationary bench-top use while remaining portable enough for controlled repositioning when required. What material is the surface made from and why is that important? The plate is made from dark granite, chosen for thermal stability and wear resistance, which helps preserve flatness and repeatability in routine workshop conditions. Does the Metav IndustryLine plate include certification or calibration details? Product documentation is available from Metav IndustryLine; for specific calibration certificates or traceability requirements, please consult the product adviser. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
39mm Adjustable Base With M10 Thread - Filetta
Reliable support for measuring tables is achieved with an adjustable foot that combines a secure M10 thread, a broad 39 mm base and a compact, service-friendly design; order the adjustable foot directly via Metav Werkzeuge or ask our consultants if needed Adjustable foot MS636.760 — M10 threaded support for measuring tables (Filetta) The adjustable foot provides a stable, height-adjustable support for measuring tables and stands, designed for secure attachment and reliable load distribution in workshop and inspection environments Adjustable support element with M10 thread Broad 39 mm base for even load distribution Simple retrofitting to standard M10 mountings Compact design for tight installation spaces Improved repeatability through stable support A robust support point is a small detail that improves measurement repeatability. The M10 thread ensures a positive mechanical connection to frames and table plates, while the 39 mm base spreads load and reduces point pressure. As a result, mechanical resonance and local deformation are reduced, which leads to more consistent readings during inspection or assembly tasks. Fewer micro-shifts at the support translate directly into lower rework rates and faster quality checks, making the component a pragmatic efficiency gain for production and metrology benches. Fast installation and compatibility with common equipment Fitting or replacing machine supports is straightforward when standardised thread sizes are used. The M10 interface of this component matches common metric fastenings, enabling quick retrofitting to existing measuring tables, tripods or stands without special adaptors. The compact footprint allows installation in confined spaces and close to fixtures, which simplifies jig assembly and shortens maintenance windows. For procurement planning, the Filetta MS636.760 is a low-complexity component that reduces downtime and supports lean workshop procedures. Practical design for wide-ranging workshop use Although compact, the support is intended for demanding shop-floor applications where secure seating and simple adjustability matter. The geometry of the base prioritises stable contact and resistance to tilting, which benefits inspection rigs, small measurement tables and portable stands alike. Sourcing these components through a dedicated distributor ensures consistent quality across batches; Metav’s distribution model provides traceable logistics and a practical supply channel for replacement parts and matching fittings, supporting uninterrupted operation on the shop floor. Contact Metav Werkzeuge in Emmerich for advice on compatibility, supply and tailored quantities for the Filetta adjustable foot MS636.760 Technical data Article number: MS636.760 Manufacturer: Filetta Category: Measuring table support (Messtisch) Measurements & thread Base diameter: 39 mm Thread: M10 Thread length: 20.6 mm Features Adjustable foot element Intended for measuring tables and stands Compact footprint for tight installation spaces FAQ Is the support compatible with standard metric mountings? Yes. The Filetta MS636.760 is equipped with an M10 thread and is compatible with standard metric M10 mountings used on measuring tables and stands. What is the contact area of the base? The base has a diameter of 39 mm, offering a broad contact area for improved load distribution and reduced point pressure. How deep is the threaded engagement? Thread engagement is provided by an M10 thread with a thread length of 20.6 mm, suitable for secure fastening into common support plates. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
400 x 250 x 50 mm Granite Surface Plate Grade 0, DIN 876/0 - Metav IndustryLine
The combination of Grade 0 accuracy, dark granite construction and a solid 16 kg mass ensures stable, repeatable inspection results; suitable for layout work and precision checks. Order the granite plate directly via Metav Werkzeuge or contact the consultants for application advice. Granite plate 400 x 250 x 50 mm, Grade 0 (Metav IndustryLine) A Granite plate 400 x 250 x 50 mm, Grade 0 designed as a stable control surface for precision inspection, layout and checking tasks in workshops and metrology rooms Grade 0 accuracy per DIN 876/0 Dimensions 400 x 250 x 50 mm Made from dark granite for stability Solid 16 kg mass for vibration damping Reliable flatness and measurement support for inspection tasks The Grade 0 classification according to DIN 876/0 guarantees a reference surface suitable for demanding inspection and layout work. The high flatness tolerance of a Grade 0 surface reduces systematic measuring errors and provides a stable datum for visual checks, height gauges and simple mechanical measuring rigs. The dark granite material resists corrosion and retains its geometry over time, so routine results remain reproducible even in busy workshop environments. Designed mass and material for vibration damping and long-term stability With a substantial mass of 16 kg, the plate dampens minor vibrations and improves the stability of hand-held measuring operations and stationary instruments. The dark granite construction combines low thermal expansion with excellent wear resistance; this means surface deviations due to temperature changes are minimised and the plate remains a dependable reference during production runs. The result is improved measurement consistency and fewer repeat checks. Practical information for integration and use This item is supplied as a control surface only; no stand is included. The compact footprint of 400 x 250 x 50 mm makes the plate suitable for bench-top use while still offering a robust reference area for components and gauges. The moderate weight allows single-person handling in most cases and ensures the surface sits firmly during routine checks and marking operations. The plate is identified by SKU M206.103 and GTIN 4054469102948 for straightforward inventory and reordering. Contact Metav Werkzeuge today to reserve the Grade 0 granite plate for immediate dispatch from Emmerich and benefit from expert advice on integration into the measuring workflow—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M206.103 GTIN: 4054469102948 ECLASS: 21170603 Facts Dimensions: 400 x 250 x 50 mm Weight: 16 kg Grade: 0 Special features Material: dark granite Standard: DIN 876/0 Note: only control plate, without stand Tariff code: 68022300 FAQ What tolerance class does the plate comply with? The plate complies with Grade 0 flatness according to DIN 876/0, making it suitable for high-precision inspection tasks. Is the support structure included with the granite plate? No; the product is supplied as a control plate only and is delivered without a stand. Which material is the surface plate made from? The surface is manufactured from dark granite, chosen for its low thermal expansion and wear resistance. What is the item identifier for reordering? The SKU is M206.103 and the GTIN is 4054469102948 for inventory and procurement. Is the plate suitable for bench-top metrology setups? Yes; the dimensions 400 x 250 x 50 mm and the 16 kg mass make it well suited for bench-top inspection and layout applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 x 400 x 100 mm Granite Surface Plate Grade 0, DIN 876/0 - Metav IndustryLine
Reliable, wear‑resistant reference surface engineered for workshop metrology: the plate combines Grade 0 flatness with dense dark granite construction to deliver stable measurements and excellent vibration damping. With a compact footprint and substantial mass, it reduces thermal and mechanical distortion for repeatable inspection results. Order the granite plate directly via Metav Werkzeuge or ask our consultants if needed. Granite plate 400 x 400 x 100 mm, Grade 0 — Metav IndustryLine surface plate The Granite plate 400 x 400 x 100 mm Grade 0 is a precision surface plate designed as a stable reference for inspection, layout and quality control tasks in machine shops and metrology labs. Grade 0 accuracy to DIN 876/0 Dense dark granite for stable reference 400 x 400 x 100 mm flat working area 50 kg mass for excellent vibration damping Stable reference for repeatable measurements A surface reference in Grade 0 provides a high level of flatness suitable for routine quality control and workshop inspection. Certified to DIN 876/0, the plate serves as a reliable horizontal datum for layout, squaring and comparative checks. The specified grade indicates a fine tolerance class that keeps systematic measurement errors low; this makes the component ideal where consistent, repeatable results are required rather than laboratory micro‑metrology. The solid construction and flatness class reduce the need for frequent readjustment of tools and fixtures, shortening inspection cycles and streamlining throughput. Material and thermal performance for everyday use Manufactured from dark granite, the plate excels in thermal stability and wear resistance compared with metallic reference surfaces. Granite’s low coefficient of thermal expansion and high density minimise dimensional change during normal shop temperature fluctuations, supporting stable results across measurement runs. The inherent damping properties of the stone, combined with a mass of 50 kg, suppress small vibrations from nearby machinery, improving dial and probe readings. The result is a robust reference surface that requires little maintenance and retains its calibration over time when handled and stored correctly. Ready integration into inspection layouts and fixtures As a compact surface plate, the unit is supplied as a control plate only — without stand — offering flexibility for direct mounting on benches, stands, or custom frames. The flat working area of 400 x 400 x 100 mm provides ample space for fixturing small to medium components used in general machine building and toolmaking. The dense top surface is suitable for routine cleaning and can be used with surface plates accessories and parallels. For procurement and logistics, the plate is a practical balance between manoeuvrability and stability: substantial enough to damp vibrations, yet small enough for single‑person placement with appropriate handling aids. Contact Metav Werkzeuge for guidance on workshop integration, delivery options from Emmerich and compatibility with existing inspection equipment for the Metav IndustryLine granite plate M206.104 Technical data Article number: M206.104 GTIN: 4054469102955 Manufacturer: Metav IndustryLine Facts Dimensions: 400 x 400 x 100 mm Weight: 50 kg Tariff number: 68022300 Standard: DIN 876/0 Special features Material: dark granite Grade: 0 Usage: inspection and layout work Note: only control plate, without stand FAQ What flatness class does the plate meet? The plate conforms to Grade 0 flatness and is manufactured to DIN 876/0, providing a high‑grade workshop reference suitable for general inspection tasks. Can the plate be used for layout and squaring tasks? Yes. The dense granite top and 400 x 400 x 100 mm working area make it well suited for layout, squaring and comparative checks in machine shops and quality control cells. Is a stand or frame included with the delivery? No. This unit is supplied as a control plate only and is delivered without a stand; it can be mounted on benches or compatible frames as required. How does the material benefit measurement stability? The dark granite construction offers low thermal expansion and excellent vibration damping, which helps to maintain repeatable measurement results under typical workshop conditions. What is the product SKU for ordering or referencing? The surface plate is listed under SKU M206.104 and is part of the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x250mm Granite Surface Plate With 4x M10 Threaded Inserts, DIN 876/0 - Filetta
Benefit from the combination of DIN 876/0 flatness, robust granite construction and integrated M10 fixing points for reliable inspection and fixture work; order this plate directly via Metav Werkzeuge or consult our advisers for application advice. Granite plate MS402.038 — precision surface plate, 400 x 250 x 50 mm, 4×M10 (Filetta) The Granite plate MS402.038 is a compact precision surface plate intended as a flat reference and mounting surface for inspection, jig assembly and metrology bench applications. High-stability granite construction DIN 876/0 accuracy class Four M10 threaded fixing points Repeatable measurements through proven flatness The plate is manufactured to DIN 876/0, which ensures a defined level of flatness suitable for routine inspection and workshop control tasks. The combination of natural granite and controlled machining reduces local deformation under load, delivering a stable reference surface that improves measuring repeatability. This level of specification benefits processes where consistent comparison of parts is required and helps to reduce rework caused by uncertain reference standards. Secure fixturing and practical bench format With four threaded fixing points (4×M10) and compact dimensions of 400 x 250 x 50 mm, the plate offers a practical balance between reach and rigidity for bench-top work. The overall mass provides inherent stability during measurements and small assembly tasks, while the threaded inserts simplify attachment of fixtures, clamping elements or lightweight stands. This results in faster set-up times and fewer adjustments when aligning components for visual inspection or jig assembly. Built for workshop routines and inspection benches The material choice provides wear resistance and dimensional stability under normal workshop conditions, making the plate well suited to everyday metrology tasks on inspection benches or portable stands. Its format and thread pattern match common fixturing practices so that small fixtures and tripods can be integrated without complicated adaptors. The result is a practical reference surface that supports consistent quality checks and straightforward integration into existing inspection workflows. For precise application advice or to arrange supply of the Filetta MS402.038 through Metav Werkzeuge in Emmerich, contact Metav Werkzeuge to confirm suitability and delivery details Technical data Article number: MS402.038 Dimensions: 400 x 250 x 50 mm Weight: 20 kg Threads: 4 x M10 Standard: DIN 876/0 Facts Flatness class: DIN 876/0 Material: granite Number of threaded fixing points: 4 Thread size: M10 Mass: 20 kg Special features Suitable for metrology and inspection tables Compact format for bench-top use Compatible with stands and fixtures (stativ) Robust granite surface resists wear FAQ What flatness standard does the plate meet? The Filetta granite plate MS402.038 is manufactured to DIN 876/0, providing a defined flatness class for routine inspection and comparative measurements. How can the plate be mounted or fixed? The plate includes four M10 threaded fixing points for direct attachment of clamping elements, fixtures or lightweight stands. Is the plate suitable for bench-top inspection use? Yes, the 400 x 250 x 50 mm format and 20 kg mass make the plate well suited to bench-top inspection and jig assembly where a stable reference surface is required. How should the surface be maintained? Maintain the granite surface with a soft brush or lint-free cloth; avoid abrasive cleaners and strong solvents to preserve the measuring face and mounting threads. Can the plate be used with portable stands or tripods? The design and threaded fixing points allow integration with common portable stands and fixtures, enabling flexible use on inspection benches and small assembly stations. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
400x250x50 mm Granite Plate With 3x M8 Mounting Threads, DIN 876/0 - Metav IndustryLine
Take advantage of a DIN 876/0 reference surface combined with the mass and stiffness of dark granite to secure repeatable measurement results; the three M8 mounting points enable direct attachment of a measuring stand for compact inspection setups. Order the granite surface plate directly via Metav Werkzeuge or ask the consultants for installation advice. Granite surface plate M206.113 — 400×250×50 mm with 3× M8 (DIN 876/0) The granite surface plate M206.113 is a compact, high‑stability measuring reference for workshop inspection and bench metrology, featuring a wear‑resistant dark granite surface and three M8 threaded mounting points for secure attachment of test stands Precision grade DIN 876/0 accuracy Surface 400×250×50 mm in dark granite Three M8 threaded mounting points Stable weight 15.6 kg for vibration damping Repeatable flatness for reliable quality checks A reference surface built to DIN 876/0 offers a clearly defined specification for allowable deviations, so repeat measurements remain comparable over time. The flatness of the plate is the fundamental contributor to measurement reproducibility: a stable reference plane reduces geometric uncertainty when comparing parts or setting gauges. For routine inspection tasks, this translates into fewer reworks and a faster go/no‑go decision process, improving overall throughput in production control. Material benefits that reduce environmental effects Made from dark granite, the slab combines low thermal expansion with excellent wear resistance, which keeps the working surface stable under typical workshop temperature fluctuations. Granite’s natural damping reduces susceptibility to ambient vibrations, while its resistance to scratching and corrosion preserves the reference quality over long service life. These material properties make the plate especially suitable for precision jigs, small assembly fixtures and repeat inspection of medium‑sized components. Secure mounting and handling for compact setups Equipped with 3 × M8 threaded mounting points, the plate accepts measuring stands and fixturing without additional adapters, enabling a compact measuring station on the workshop bench. Its mass—15.6 kg—provides inherent stability and aids vibration damping during probing or manual measurements, while keeping the unit compact enough for single‑person handling with care. The integrated threads shorten setup time and improve positional stability for dial gauges and small probe arms. Practical size for workshop versatility With overall dimensions of 400×250×50 mm, this surface is large enough for most bench inspection tasks yet small enough to be repositioned or stored easily. The format suits general metalworking and precision assembly where a reproducible reference plane is required for squareness checks, height setting or comparative measurements. Compliance with a DIN accuracy class means the plate fits standardised workflows in quality control and measuring laboratories, simplifying documentation and traceability. Discuss mounting and delivery with Metav Werkzeuge’s Emmerich team to ensure the granite surface plate M206.113 integrates with existing stands and inspection benches Technical data Article number: M206.113 GTIN: 4054469103150 Tariff number: 68022300 Facts Size: 400×250×50 mm Weight: 15.6 kg Threads: 3 × M8 Special features Material: dark granite Accuracy: DIN 876/0 Category: Measuring table FAQ What level of flatness tolerance does this plate offer? The plate meets DIN 876/0, which defines the allowable flatness deviation for this accuracy grade and ensures a certified reference level for routine inspection. Can measuring stands be fixed directly to the plate? Yes. The plate is supplied with 3 × M8 threaded mounting points so measuring stands and small fixtures can be attached directly for a compact inspection setup. Is the granite surface suitable for workshop environments? The dark granite construction provides low thermal expansion and good wear resistance, making the slab robust for normal workshop conditions and repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x300x50 mm Granite Surface Plate With 6x M8 Top And 4x M10 Bottom, DIN 876/0 - Metav IndustryLine
Take advantage of the combination of a stable, wear‑resistant measuring surface, precise compliance with DIN 876/0, and practical mounting options for reliable inspection workflows; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Granite plate M206.117 — 400 x 300 x 50 mm, DIN 876/0 (Metav IndustryLine) The Granite plate M206.117 is a compact measuring table designed as a flat, stable reference surface for workshop inspection, fixture set‑up and small‑scale assembly measurement tasks. High-stability dark granite construction Compliant with DIN 876/0 standard Mounting threads for fixture integration Precise flatness for inspection work Consistent reference surface for repeatable measurements A rigid reference surface is the foundation of reliable metrology. The combination of a 400 x 300 x 50 mm footprint and a mass of 20 kg gives a low centre of gravity and effective vibration damping, which helps reduce measurement scatter during manual or instrumented checks. The flatness ensured by the DIN grade contributes directly to traceable results on the shop floor and in quality control, so measuring sessions become faster and results more trustworthy. Flexible integration with fixtures and stands Equipped with mounting threads, the plate allows simple integration of clamping fixtures and measuring stands. The provision of 6 x M8 and 4 x M10 threaded points supports a variety of attachments and accessories, enabling modular fixturing without invasive modification of the measuring surface. This fixture integration capability streamlines setup times and reduces the need for bespoke adapters when switching between inspection tasks. Durable material and standardised accuracy for long service life Manufactured from dark granite, the plate resists wear and maintains thermal stability better than many metallic alternatives; that results in smaller dimensional shifts under routine workshop conditions. Conformity to DIN 876/0 indicates the highest grade of surface accuracy within that norm, making this solution suitable where precise flatness matters. Handling is straightforward: the plate’s mass provides stability in use while remaining manageable for two‑person transfers within a workshop or lab. Practical benefits for inspection, layout and assembly work The plate serves as a multi‑purpose metrology aid: as a base for visual inspection, a datum for layout tasks, or as the foundation for mounted gauges and small fixtures. Its compact size balances reach and stiffness, delivering superior rigidity compared with longer plates of similar cross section. The result is improved measurement reproducibility and a reduction in rework, supporting a smoother production flow and better quality outcomes. Contact Metav Werkzeuge for tailored advice and local availability — Metav IndustryLine granite plates are stocked in Emmerich and can be prepared for prompt dispatch to the workshop. Technical data Article number: M206.117 GTIN: 4054469183527 Material: dark granite Standard: DIN 876/0 Facts Dimensions: 400 x 300 x 50 mm Weight: 20 kg Special features Mounting threads: 6 x M8, 4 x M10 Category: Measuring table / messtisch Image asset available for reference (thumbnail) FAQ What surface accuracy does the plate provide? The granite plate M206.117 is manufactured to meet DIN 876/0, which denotes the highest flatness grade within that standard and supports precise inspection tasks. Can the plate be used as a base for measuring stands and gauges? Yes, the plate’s threaded points (6 x M8 and 4 x M10) permit secure attachment of measuring stands, gauges and fixtures, allowing modular set‑ups for inspection and assembly. Is the material suitable for a busy workshop environment? Constructed from dark granite, the plate delivers good wear resistance and thermal stability, making it appropriate for regular use in industrial and shop settings. How does the plate help reduce measurement variability? The combination of mass (20 kg), granite stiffness and the DIN 876/0 flatness reduces vibration and geometric drift, which improves repeatability for manual and instrumented measurements. What is the recommended handling method for the plate? Given its mass and dimensions, handling with two persons or appropriate lifting aids is recommended; the plate’s size balances stability and manageability for workshop logistics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x400x50 mm Granite Plate With 3x M8 Mounting Threads, DIN 876/0 - Metav IndustryLine
Take advantage of a stable, wear‑resistant reference surface and the convenience of three threaded mounts for secure fixturing; the combination of DIN 876/0 accuracy and dense dark granite supports repeatable inspection and layout tasks. Order the granite surface plate directly via Metav Werkzeuge or consult the technical team for application advice. Granite surface plate 400 x 400 x 50 mm — Surface plate with 3x M8, DIN 876/0 (Metav IndustryLine) The Granite surface plate 400 x 400 x 50 mm is a compact, thermally stable reference plane for metrology, inspection and workshop layout tasks Precise DIN 876/0 flatness 3x M8 threaded mounting points Dense dark granite for thermal stability Built for repeatable precision A DIN 876/0 classification guarantees a high degree of planar accuracy, making the plate an appropriate choice where consistent reference geometry is required. The 400 × 400 × 50 mm footprint offers a practical balance between working area and rigidity; at 25 kg the plate resists vibration and local deformation during measurement. For inspections that require reliable repeatability, the combination of a hard natural stone surface and a validated manufacturing standard reduces uncertainty and simplifies conformity checks. Robust mounting and material benefits Threaded attachments simplify integration with measurement stands and fixtures: the 3x M8 threaded ports allow secure clamping or permanent mounting to a base or a measuring stand without resorting to improvised fixturing. The dark granite body delivers excellent wear resistance and low thermal expansion compared with many metals, which helps maintain a stable datum across temperature variations in a standard workshop environment. This results in fewer setup rechecks and more productive inspection cycles. Practical advantages for the workshop and quality lab Using a dedicated granite reference surface shortens setup times for gauges, dial indicators and manual measuring assemblies because a single, flat datum removes the need for temporary shims or complex alignment procedures. The plate supports layout work, comparative inspection and alignment tasks where a reliable reference is essential. Supplied as a compact, transportable block, it is suitable for inspection benches, toolroom use and as a fixed station on production lines where a repeatable reference plane improves throughput and reduces scrap. Contact Metav Werkzeuge in Emmerich to discuss integration options for the Metav IndustryLine granite surface plate and to arrange delivery or technical consultation Technical Data Article number: M206.114 Label: Granite surface plate, 400 x 400 x 50 mm, with 3 x M8 DIN 876/0 Material: dark granite Standard: DIN 876/0 Facts Dimensions: 400 x 400 x 50 mm Weight: 25 kg Threading: 3 x M8 GTIN: 4054469103167 Tariff number: 68022300 eClass: 21170603 Special features Dense natural granite for stability and wear resistance Three threaded mounts for measuring stands or fixtures Compact footprint for bench and workshop use Suitable as a stable reference surface for inspection and layout FAQ What flatness class does this plate have? The plate is specified to DIN 876/0, which indicates a high flatness standard suitable for precise inspection and layout tasks. Can the plate be mounted to a measuring stand? Yes — the product includes 3x M8 threaded mounting points intended for secure attachment to stands or fixturing systems. What material is the surface plate made from? The surface plate is manufactured from dark granite, chosen for its wear resistance and low thermal expansion. Is a calibration certificate supplied with the surface plate? No calibration certificate is specified in the product data for this item; the product description does not list an included calibration document. What applications suit this granite surface plate? The plate is intended for metrology workstations, toolroom inspection, layout and bench‑level comparative measurements where a stable, repeatable reference surface is required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Foot for Granite Plate M10 Thread, Set of 4, Length 32 mm - Metav IndustryLine
Take advantage of the M10 threaded fixing and Ø50 mm contact area to gain a low‑profile, vibration‑resistant support for measurement plates; the compact 32 mm overall length and lightweight construction ensure easy retrofitting and reliable repeatability on workshop granite bases. Order directly via Metav Werkzeuge or consult their technical team for compatibility questions. M206.118 Granite plate feet (M10, Ø50 mm) — Metav IndustryLine The M206.118 is an accessory for granite plates with an M10 thread and 50 mm diameter pads, engineered to provide stable, low‑profile support for precision measurement bases and fixtures. M10 threaded attachment for secure fixing Ø50 mm support pads for stable contact Compact 32 mm overall length for low profile Increased stability for repeatable measurements Granite support feet with a larger contact pad reduce point pressure and improve the distribution of load across the measurement surface. The Ø50 mm pads offer a broader contact area that helps to limit micro‑movement and vibration, which translates into more repeatable readings on measurement plates and assemblies. Supplied as a set of four, the component supports four‑point seating that stabilises small to medium‑sized bases without adding significant height, making these feet a practical choice where measurement integrity is essential. Straightforward fitting and broad compatibility The M10 screw interface simplifies installation and replacement on compatible plates and fixtures. The M10 thread enables secure mechanical attachment without special tooling, allowing retrofitting to existing measurement setups. Compatibility is documented with models M206.116 and M206.117, and the design is suitable for use wherever a threaded M10 support is specified. The compact form factor also allows easy integration into tight assemblies while maintaining robust mechanical contact. Workshop efficiency through compact design A total length of 32 mm overall length makes these feet particularly suitable for applications that require a low profile to preserve working clearance. At a nominal 0.2 kg the set keeps added mass to a minimum, reducing handling effort and simplifying transport and storage of measurement fixtures. The compact design supports quick assembly workflows and reduces the chance of interference with jigs, gauges or other measuring instruments, helping to keep inspection processes both efficient and dependable. Contact Metav Werkzeuge for tailored advice on integrating these granite plate feet into existing measurement systems or to confirm compatibility with specific plates — Tel: +49 2822 7131930 · Email: info@metav-werkzeuge.com Technical Data Article number: M206.118 GTIN: 4054469183534 Weight: 0.2 kg Set contents: 4 pieces Total length: 32 mm Pad diameter: 50 mm Thread: M10 Facts Suitable for: M206.116 and M206.117 Category: Accessory eCl@ss: 27110390 Special features Low‑profile granite support feet Set for stable, four‑point support Compact design for measurement bases FAQ What thread do these granite plate feet use? The M206.118 granite plate feet from Metav IndustryLine use an M10 thread for mechanical attachment. Are the feet delivered ready for installation as a set? Yes, the M206.118 is supplied as a set of four feet, intended to provide four‑point support for granite plates and similar bases. What are the pad diameter and overall length? The support pads measure Ø50 mm and the components have a 32 mm overall length. Which measurement plates are explicitly compatible? Compatibility is documented for plates referenced as M206.116 and M206.117; the feet fit any application with an M10 mounting requirement. How much does the set weigh? The complete set is specified with a weight of 0.2 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Establish a traceable, stable measurement base for precision work
Granite plates provide the fundamental, absolutely flat reference surface required for reliable quality control in industrial metrology, toolmaking and r&d. Designed for mounting measurement setups, calibrating gauges and accurate scribing of workpieces, granite plates outperform traditional cast-iron alternatives where long-term form stability and low thermal sensitivity are essential.
Why granite plates are the preferred measurement surface
Naturally dense and free of internal stresses, granite resists post-production distortion and offers a very low thermal expansion coefficient, so measurements remain reproducible even in non‑climatised workshops. The material is inherently wear- and corrosion-resistant, antimagnetic and non-conductive, preventing interference with magnetic stands or delicate electrical measuring instruments. A finely lapped surface ensures smooth glide of gauges and test pieces without generating burrs.
Practical advantages that improve shop-floor performance
- Reduced setup and recalibration frequency thanks to exceptional form stability and a low coefficient of thermal expansion.
- Consistent measurement results in variable ambient conditions, supporting reproducible inspection processes.
- Maintenance-free surface: no oiling or greasing required due to corrosion resistance and scratch behaviour that avoids burr formation.
- Compatibility with magnetic and non-magnetic inspection equipment because the plates are antimagnetic and non-conductive.
- Available accuracy classes per DIN 876, from robust workshop grades (grade 1 or 2) to high-precision laboratory plates (grade 00), plus matching stable underframes with stress-free, levellable three-point support.
Metav as your precision partner for measurement foundations
Metav combines decades of industry expertise with a broad, quality-filtered assortment from its Emmerich hub. With over 48,000 customers and more than 250,000 products, Metav supplies granite plates alongside engineered underframes and accessories to form a complete measurement foundation. This makes Metav a pragmatic choice for purchasing managers who want reliable supply, transparent order processing and specialist advice for industrial measurement needs.
FAQ
What accuracy classes are available for granite plates and how do they differ?
Granite plates are offered in accuracy classes according to DIN 876; workshop plates (grade 1 or 2) suit routine inspection and layout work, while laboratory plates (grade 00) provide the highest flatness for calibration and precision metrology.
Can granite plates be used with magnetic measuring stands and electronic gauges?
Yes. The granite plates in our range are antimagnetic and non-conductive, so they do not interfere with magnetic stands and are compatible with sensitive electrical measuring devices.
How do granite plates behave under temperature changes in a typical workshop?
Due to their low thermal expansion coefficient and the absence of internal stresses, granite plates maintain consistent form stability, enabling reproducible measurement results even in workshops without climate control.
Are supports and underframes necessary, and what should they provide?
Stable underframes with a stress-free, levellable three-point support are recommended to preserve the plate’s flatness and ensure reliable long-term accuracy; Metav supplies matching underframes engineered for this purpose.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com