Precision cut-off tools for accurate grooving and part-off operations
Cut-off tools are narrow holder systems for lathes designed to produce precise grooves and part-offs, offering reliable control when machining steels and other workpiece materials where clean separation is essential. They serve as either solid clamp-style holders or flat tool blades fitted with indexable carbide inserts, and when equipped with internal coolant channels they deliver high-pressure coolant directly to the insert to control heat and evacuate chips efficiently. Using these tools reduces the risk of chip jamming, surface damage and sudden tool failure while improving repeatability, particularly in deep grooving and tough materials where external coolant is insufficient. Key advantages include enhanced cutting stability, extended insert life and consistent part quality through optimised chip evacuation and thermal management.
16mm Stechklemmhalter 1616 3C-R ZT-D For 3C ZT.D Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of secure clamping, precise 3 mm cutting width and compatibility with ZCC 3C ZT.D indexable inserts for reliable parting and grooving performance. Order the parting tool holder directly via Metav Werkzeuge or consult our specialists for specification matching and fast supply. Parting Tool Holder 1616 by Teknik Makina — right-hand, 3 mm cutting width A Parting Tool Holder 1616 engineered for right-hand parting and grooving tasks; designed to accept ZCC 3C ZT.D indexable inserts for precise, repeatable cuts in production and workshop environments Compatible with ZCC 3C ZT.D inserts 3 mm cutting width for narrow grooves 16 mm shank height and width Right-hand cutting for standard turning Dependable parting performance that reduces rework The Parting Tool Holder delivers a focused cutting geometry that supports stable, repeatable cuts thanks to its defined 3 mm cutting width and solid interface for indexable inserts. The combination of a compact clamping area and the holder’s stiffness reduces vibration during cut-off operations, which in turn lowers the risk of part distortion and tool failure. For production environments where cycle consistency is critical, this configuration promotes predictable tool life and fewer scrap parts. Compact dimensions with secure clamping for consistent set-up The holder’s 16 mm shank dimensions (height and width) and robust clamping construction permit quick, precise positioning in tool posts with minimal overhang. With an overall length of 125 mm and a mass of 0.301 kg, the component is sized to minimise leverage while still providing convenient access for insert changes. The clamping design secures the indexable insert reliably, supporting higher feed stability and repeatable set-ups across series production. Streamlined compatibility to simplify tooling choices Compatibility with ZCC 3C ZT.D indexable inserts and the ISO designation 1616 means straightforward integration into existing parting and grooving tool sets. The holder is specified for right-hand cutting, matching standard lathe orientations, and is referenced with the bar designation 3C-R ZT-D, enabling easier procurement of matching bars and inserts. This alignment of holder and insert standards reduces complexity when planning tool inventories and replacement cycles. Practical workshop benefits and suitable applications Designed for narrow parting, finishing grooves and intermittent cut-off operations, the holder supports controlled material removal up to the stated maximum cutting depth of 18 mm. Its compatibility with a recognised insert family and concise dimensions make it a pragmatic choice for small-batch production, toolrooms and maintenance shops where fast insert swaps and dependable clamping are priorities. The result is improved throughput with lower setup overhead. For technical clarification or procurement of Teknik Makina parting components, contact Metav Werkzeuge in Emmerich for a specification check and prompt supply from stock Technical Data Article number: D027TM Manufacturer: Teknik Makina Product name: Parting tool holder (Stechklemmhalter) Manufacturer SKU: D027TM Dimensions & Weight Overall length: 125 mm Shank width: 16 mm Shank height: 16 mm Cutting width: 3 mm Maximum parting depth: 18 mm Weight: 0.301 kg Compatibility & Features Cutting direction: right-hand Compatible inserts: 3C ZT.D Insert manufacturer reference: ZCC ISO designation: 1616 Bar designation: 3C-R ZT-D FAQ What inserts fit this holder? The holder accepts ZCC 3C ZT.D indexable inserts; the assembly is specified to work with that insert family for consistent seat and chip control with the Parting Tool Holder (Teknik Makina, SKU D027TM). Is the tool suitable for deep grooving? This parting holder is specified for a maximum cutting depth of 18 mm; for deeper operations, alternative tooling or multiple passes may be required with the Teknik Makina holder D027TM. Can it be mounted in standard tool posts? Yes. The 16 mm shank dimensions are compatible with tool posts designed for 16 mm holders, enabling reliable clamping and repeatable set-up with the Teknik Makina parting solution. What is the hand of cut and how does it affect set-up? The component is configured for right-hand cutting, which matches common lathe orientations; this should be considered when positioning the holder in the turret or tool post to achieve correct chip flow and clearance. Which data specify the holder for procurement? Refer to the SKU D027TM, ISO designation 1616, and the compatible insert family 3C ZT.D when ordering or matching inserts for the parting holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Stechklemmhalter 2mm Cutting Width, 16mm Stechschwert Depth, 125mm Overall Length, ISO 1616, 2C-L MGM, For 2C MGM Wendeplatten, Linksschneidend Innenkühlung - Teknik Makina
Take advantage of a compact, rigid holder that combines a 16 x 16 mm ISO shank, a 2 mm cutting width and compatibility with Korloy 2C MGM inserts to achieve clean parting cuts and stable grooving operations; order the (Stechklemmhalter) directly via (Metav Werkzeuge) or ask our consultants if needed. Stechklemmhalter — Parting and grooving tool holder, left-hand, ISO 1616 (Teknik Makina) The Stechklemmhalter is a left-hand parting and grooving holder engineered for secure clamping of 2C MGM style inserts and precision narrow-width cuts in CNC turning applications. Compact 16 x 16 mm ISO shank Max grooving depth 16 mm 2 mm cutting width for narrow grooves Compatible with Korloy 2C MGM inserts Increased stability through a compact ISO 1616 shank A compact 16 x 16 mm shank (ISO 1616) provides a rigid interface with the tool post, reducing vibration and improving surface finish during parting operations. The modest 125 mm overall length and low mass (0.25 kg) limit overhang while maintaining accessibility in tight setups. This translates into more predictable chip formation and reduced rework, so production runs benefit from steadier cycle times and fewer rejects. Reliable compatibility with established insert systems Designed for use with Korloy inserts in the 2C MGM format and matching boring-bar designation 2C-L MGM, the holder fits commonly stocked insert types. Compatibility ensures simple stocking and fast aftermarket replacement. The clamp-style mounting secures the insert for consistent cutting geometry; explained for non-specialists, this means repeatable parting widths and predictable tool life with standardised inserts. Precise narrow cuts up to 16 mm depth With a 2 mm cutting width and a maximum grooving depth of 16 mm, the holder is intended for fine parting and internal/external grooving tasks where space is restricted. Narrow-width cutting reduces material waste and enables close-tolerance separation of finished parts. For left-hand operations, the orientation of the holder sets the correct chip flow and clearance, helping to protect the workpiece and insert during the cut. Practical workshop advantages and straightforward handling The conservative dimensions and proven geometry make the holder straightforward to integrate across turning centres and lathes. The parting solution is lightweight yet robust, supporting quicker set-ups and simpler handling on the bench. For purchasers seeking dependable supply and expert advice, Metav provides a quality-filtered inventory from Emmerich and guidance on matching the holder to machine and insert choices. For precise left-hand parting with Teknik Makina tool holders, contact Metav Werkzeuge for tailored advice and secure supply from Emmerich — Metav’s consultants are available to discuss application specifics and compatibility Technical data Article number: D608TM Manufacturer: Teknik Makina Product designation: Stechklemmhalter ISO shank designation: 1616 Compatible inserts: Korloy 2C MGM Boring-bar designation: 2C-L MGM Facts Weight: 0.25 kg Overall length: 125 mm Shank height: 16 mm Shank width: 16 mm Cutting width: 2 mm Max grooving depth: 16 mm Special features Left-hand cutting direction Parting and grooving application Clamp-style holder for indexable inserts ISO 1616 compact shank FAQ Which insert type fits this parting holder? The holder accepts Korloy 2C MGM style inserts; the designation 2C MGM is the specified compatible insert format for reliable seating and cutting performance. Is this holder suitable for left-hand turning only? Yes, the tool is specified for left-hand cutting direction and is configured to direct chips and cutting forces accordingly. What are the key dimensions relevant for machine setup? Important setup dimensions include the 16 x 16 mm ISO shank, 125 mm overall length, and 2 mm cutting width, which guide tool-post clearance and overhang planning. Can the holder handle deep grooving operations? The holder supports a maximum grooving depth of 16 mm, making it suitable for many parting and grooving tasks within that limit. What is the SKU for ordering spare holders or replacements? Order reference: D608TM (Teknik Makina Stechklemmhalter) Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Stechklemmhalter 3mm Cutting Width, 17mm Max Depth, 1616, 3C-DGM 3, For 3C DGM 3 Inserts, Innenkühlung, Rechtsschneidend - Teknik Makina
Take advantage of a compact, rigid holder that combines secure clamping with compatibility for common indexable inserts; the 16 x 16 mm shank and 3 mm cutting width ensure stable parting and grooving operations — order directly via Metav Werkzeuge or consult our advisors for application-specific advice. Parting clamp holder D848TM — 16 x 16 mm shank, 3 mm cutting width (Teknik Makina) Parting clamp holder D848TM is a compact tool holder designed for grooving and parting tasks on CNC lathes, compatible with 3C DGM 3 indexable inserts. Robust 16 x 16 mm shank for secure mounting Precise 3 mm cutting width for narrow grooving Compatible with 3C DGM 3 indexable inserts 125 mm overall length for improved rigidity Efficient, measurable performance for routine parting operations The D848TM combines a 16 x 16 mm tool shank with a focused 3 mm cutting width to deliver repeatable results on short to medium-length turning and grooving cycles. The holder accepts the common 3C DGM 3 format of indexable inserts, allowing fast insert changes and consistent cutting geometry. By using a standardised insert format, toolset management is simplified and process stability is increased, which supports predictable cycle times and reduced setup effort. Rigid design that reduces vibration and improves surface finish With an overall length of 125 mm and a compact cross-section, the holder is engineered to maximise rigidity close to the cutting edge. The clamping arrangement secures the insert for reliable cutting up to a 17 mm parting depth, while the modest mass (approx. 0.263 kg) keeps dynamic forces low on the spindle. This combination helps to lower chatter, producing better surface integrity and extending insert life — an economical choice for workshops prioritising throughput and consistent quality. Practical handling and setup for workshop efficiency The clamp-style fixation and compatibility indicated as 3C DGM 3 facilitate quick insert replacement and simple tool alignment. The ISO-style designation 1616 reflects the standardised shank dimensions, making the holder straightforward to integrate into existing tool posts that accept 16 x 16 mm tooling. For cutters and maintenance teams, the obvious advantages are reduced changeover times and fewer bespoke holders to manage, supporting leaner tool inventories and faster job changeovers. For reliable parting and grooving, request Teknik Makina’s D848TM via Metav Werkzeuge — contact our Emmerich team for matching inserts, delivery options and technical guidance to ensure the holder fits the intended machine and application Technical data Article number: D848TM Manufacturer: Teknik Makina Designation: Parting clamp holder Facts Shank height: 16 mm Shank width: 16 mm Cutting-head width: 16 mm Cutting width: 3 mm Maximum parting depth: 17 mm Overall length: 125 mm Weight: 0.263 kg ISO designation: 1616 Special features Compatible inserts: 3C DGM 3 Suitable insert manufacturer reference: TNGLY-OKE Clamp-style fixation for indexable inserts FAQ Which inserts fit this holder? The holder is specified for 3C DGM 3 indexable inserts; use inserts referenced as 3C DGM 3 and those listed by the insert manufacturer TNGLY-OKE. What is the maximum cutting depth? Maximum recommended parting depth is 17 mm, in line with the holder’s design and clamping geometry. Is the shank industry-standard? Yes, the shank follows the 16 x 16 mm (ISO 1616) format, enabling fitment in tool posts that accept 16 x 16 mm holders. Which applications suit this holder best? The D848TM is optimised for grooving and parting on conventional and CNC lathes where a narrow 3 mm cut and solid clamping are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Stechklemmhalter 3mm Cutting Width, 18mm Max Stech Depth, 1616, 3C-R S224, For Horn Inserts, Right-Hand Cutting, Innenkühlung - Teknik Makina
Take advantage of a compact, precision-engineered holder that combines rigid clamping with narrow cutting capability for clean parting operations; reliable compatibility with Horn indexable inserts ensures consistent tool life and repeatable grooves. Order the parting tool directly via Metav Werkzeuge or consult the Metav team for application advice. Parting Tool Holder D703TM — right-hand grooving and parting holder, 16 x 16 mm shank Parting Tool Holder D703TM designed for right-hand parting and grooving on conventional and CNC lathes, compatible with Horn indexable inserts and ISO 1616 insert geometries 16 x 16 mm shank for stable clamping Compatible with Horn indexable inserts 3 mm cutting width for precise grooves Right-hand cutting, 100 mm overall length Precise mounting and compatibility for dependable setups The compact parting tool holder delivers a predictable, vibration-resistant mounting thanks to its 16 x 16 mm cross section and ISO designation 1616, which aligns with common toolpost interfaces. Compatibility with Horn indexable inserts and the listed bar designation 3C-R S224 simplifies procurement and replacement, reducing machine downtime. The clamping geometry is engineered to maintain consistent insert seating, which directly improves repeatability and reduces rework in batch production. Optimised cutting performance for narrow grooves and parting With a defined 3 mm cutting width and a maximum cutting depth of 18 mm, this grooving holder is aimed at precise parting and finishing passes where tight groove tolerances are required. The right-hand cutting orientation supports conventional lathe setups and predictable chip flow, making the holder suitable for both small-series manufacture and repair work. By matching groove width and depth to the insert geometry, material removal becomes more efficient and tool life is extended. Compact form factor that suits busy workstations At an overall length of 100 mm and a mass of only 0.26 kg, the tool holder is easy to position and causes minimal overhang, which helps to reduce deflection during heavy cuts. The balanced dimensions support stable cutting even in short overhang scenarios, while the modest weight makes tool changes quicker and less fatiguing for operators. This compact design is particularly useful in shops where multiple holders are kept ready for rapid switching between operations. Clear application range and workshop advantages The holder is intended for use with Horn-manufactured inserts and conforms to the ISO 1616 insert family, enabling straightforward inventory management and fast replacement. The combination of narrow cutting width, defined maximum depth and standardised shank size provides a predictable solution for turning centres, toolrooms and maintenance departments that require clean parting cuts and accurate grooving. The result is fewer rejects and better process control across repeated cycles. For reliable parting and grooving performance from Teknik Makina, contact Metav Werkzeuge for purchasing and tailored technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machines and applications Technical data Article number: D703TM Name: Stechklemmhalter Manufacturer: Teknik Makina ISO designation: 1616 Facts Shank height: 16 mm Shank width: 16 mm Cutting-head width: 16 mm Cutting width: 3 mm Max parting depth: 18 mm Overall length: 100 mm Weight: 0.26 kg Cutting direction: right Special features Compatible with Horn indexable inserts Bar designation: 3C-R S224 Suitable for parting and grooving applications FAQ What insert type fits this holder? The holder accepts Horn indexable inserts compatible with the ISO 1616 geometry; matching insert style should be selected to suit the required groove width and material. Is this holder suitable for both CNC and manual lathes? Yes — the compact dimensions and standardised 16 x 16 mm shank make the holder suitable for conventional toolposts and many CNC turret systems. What is the maximum parting depth with this holder? The maximum cutting or parting depth is 18 mm, which accommodates most narrow-to-medium section separations and grooving tasks. Does the holder support left-hand cutting? This model is configured for right-hand cutting; left-hand operations require the corresponding left-hand variant. Which bar specification does the holder match for mounting? The tool holder matches the bar designation 3C-R S224, facilitating compatibility with common bar and turret systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Stechklemmhalter S16Q 2C-R MGM For 2C MGM Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Combining precise 2 mm cutting capability with a 16 mm shank and a 35 mm cutting height delivers stable, repeatable parting operations and reduced scrap; order the K600TM through Metav Werkzeuge or consult their specialists for application guidance. K600TM Parting and Grooving Clamp Holder — 16 mm shank, 2 mm cutting width (Teknik Makina) K600TM is a parting and grooving clamp holder engineered for precision turning applications, compatible with 2C MGM indexable inserts and tailored for production lathe environments 16 mm shank diameter for secure clamping 2 mm cutting width for narrow parting cuts 35 mm cutting height for deep grooves 180 mm overall length for extended reach Compatible with Korloy, ISCAR, Sandvik inserts Stable parting performance that reduces rework The K600TM delivers a stable clamping interface thanks to its 16 mm shank and robust holder geometry, which together lower vibration during parting and grooving operations. The 2 mm cutting width provides a narrow kerf suited to accurate cut‑off work, while the 35 mm cutting height supports deeper groove needs without frequent re‑setups. These characteristics translate into fewer rejects and more predictable cycle times on production lathes. Wide compatibility for streamlined tooling logistics Designed around the MGM holder family and the ISO designation S16Q 2C‑R, this clamp holder accepts 2C MGM indexable inserts and is compatible with major insert manufacturers such as Korloy, ISCAR, and Sandvik. That compatibility simplifies tool procurement and spare‑part management in mixed‑brand toolrooms, enabling standardised toolholders across multiple machines and reducing inventory complexity. Compact, lightweight design for efficient handling With an overall length of 180 mm and a weight of 0.288 kg, the holder combines reach with a compact footprint for tight toolposts and small‑diameter tooling envelopes. The reduced mass aids rapid tool changes and helps maintain tool balance, which benefits machining stability. The modest diameter and precise dimensions support consistent set‑ups across repetitive batches, improving first‑part accuracy. Practical machining benefits and shop-floor reliability Beyond raw dimensions, the clamp holder focuses on practical workshop gains: reliable insert seating, a predictable cutting geometry for parting, and straightforward integration into established turning stations. The design supports systematic changeover procedures and consistent chip formation, helping to shorten ramp‑up times on new jobs while maintaining process reliability in everyday production. Contact Metav Werkzeuge for availability and tailored application advice on the Teknik Makina K600TM parting and grooving holder — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K600TM Designation: Parting and grooving clamp holder Manufacturer: Teknik Makina eClass: 21181005 Core technical data Shank diameter: 16 mm Cutting width: 2 mm Cutting height: 35 mm Overall length: 180 mm Weight: 0.288 kg Diameter: 21 mm Compatibility & features Suitable for 2C MGM inserts Compatible with Korloy, ISCAR, Sandvik, ZCC Shank designation: S16Q 2C‑R Holder family: MGM FAQ Is the K600TM compatible with Korloy inserts? Yes. The K600TM is designed for 2C MGM insert geometries and is compatible with inserts from Korloy, as well as other common brands listed in the technical data. What shank diameter and length does the holder use? The Teknik Makina K600TM features a 16 mm shank diameter and an overall length of 180 mm, offering a balance between reach and rigidity. What are the cutting width and height specifications? The holder provides a 2 mm cutting width and a 35 mm cutting height, suitable for precise parting and deeper grooving operations. Which holder family and ISO designation apply to this tool? The clamp belongs to the MGM holder family with the ISO designation S16Q 2C‑R, ensuring standardised fitting where MGM tooling is used. Is the K600TM suitable for production lathe applications? Yes. The K600TM from Teknik Makina is engineered for production turning and parting tasks, offering the stability and repeatability required for batch machining and high‑frequency tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Cut-Off Clamp Holder For MGM 800 Indexable Inserts 8mm Cutting Width Right, 3232 - Teknik Makina
Benefit from reliable right-hand grooving with precise clamping, 170 mm overall length and compatibility with MGM 800 indexable inserts; the D687-3TM improves process stability and reduces set-up time. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Stechklemmhalter MGM 800 L170mm — Grooving clamping holder for MGM 800 indexable inserts, right-hand, 170 mm Stechklemmhalter MGM 800 L170mm is a purpose-built grooving clamping holder designed for heavy-duty workshop and light production use, engineered to accept MGM 800 indexable inserts for consistent right-hand grooving applications. Compatible with MGM 800 indexable inserts 170 mm overall length for deeper reach Right-hand grooving with 30 mm max depth Robust 32 mm clamping head, 8 mm cutting width Precision and process reliability for groove turning The grooving clamp is engineered to deliver consistent results in repeat production. The combination of a 32 mm clamping head and a secure ISO 3232 clamping interface ensures stable insert seating and low vibration, which in turn preserves tool life and surface finish. With a clear numerical specification for max. 30 mm grooving depth, the holder supports defined machining windows so cycle times can be planned precisely and quality targets met routinely. Compatibility and setup efficiency in mixed-tool environments Designed for use with MGM 800 indexable inserts and compatible with Korloy supply ranges, this holder simplifies tool inventory by aligning with common insert platforms. The straightforward clamping mechanism, secured by an M8x22 screw and adjusted with a 6 Allen key, reduces set-up time and allows fast insert changes during shift work. Clear mechanical interfaces translate into less downtime and more predictable throughput for batch or single-part manufacturing. Robust design for workshop and light production conditions At a weight of 1.275 kg and an overall length of 170 mm, the holder balances rigidity and accessibility, enabling deeper reach without excessive tool overhang. The 8 mm cutting width is suitable for a wide range of grooving tasks where stable chip control and defined kerf width are essential. The designation ISO 3232 denotes an industry-standard clamping geometry, which supports interchangeability and simplifies tool management across machines. Practical benefits and recommended use cases This grooving clamping holder is particularly suitable for turning centres performing through-grooving and finish-grooving on steel and alloy components where a right-hand cut is required. Its compatibility with Korloy and MGM 800 inserts makes it a pragmatic choice for workshops seeking a balance between tool availability and machining performance. The solid mechanical interface reduces the likelihood of micro-movements, helping to maintain tolerances during serial production. Request tailored application advice from Metav Werkzeuge for Teknik Makina grooving clamping holders or arrange supply from our Emmerich warehouse for fast, reliable delivery Technical data Article number: D687-3TM Label: Stechklemmhalter MGM 800 L170mm Manufacturer: Teknik Makina Product type: Grooving clamping holder ECLASS: 21181005 Facts Overall length: 170 mm Weight: 1.275 kg Clamping width: 32 mm Clamping height: 32 mm Cutting-head width: 32 mm Max grooving depth: 30 mm Cutting width: 8 mm Screw: M8x22 Hex key: 6 Allen Cutting direction: right Special features Compatible with MGM 800 indexable inserts ISO clamping designation: 3232 Suitable for Korloy inserts SKU: D687-3TM FAQ What inserts are compatible with this grooving clamping holder? The holder accepts MGM 800 indexable inserts and is listed as compatible with Korloy insert ranges for straightforward sourcing and installation. What is the maximum grooving depth achievable with this tool? The grooving capability is specified at a maximum depth of 30 mm, allowing for deeper groove operations within stable cutting parameters. How is the insert secured and what tools are required for maintenance? The insert is clamped via an ISO 3232 interface using an M8x22 clamping screw; a 6 Allen key is required for tightening and insert changes. Is the holder suited for serial production environments? Yes; the holder’s robust 32 mm clamping head and stable design make it suitable for repeated production cycles where process reliability and dimensional consistency are priorities. Which cutting direction does the holder support? This grooving clamping holder is configured for right-hand cutting direction, optimised for right-hand grooving operations. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Grooving Clamp Holder For MGM 600 Indexable Inserts 6mm Cutting Width, 25mm Max Depth, Right - Teknik Makina
Take advantage of a compact holder that combines sturdy construction with predictable repeatability: the design supports MGM 600 indexable inserts, offers a 32 mm clamping head for reduced vibration and a 25 mm maximum cutting depth for deeper grooving tasks. Order supply or request technical advice via Metav Werkzeuge for fast delivery and tailored recommendations. Grooving clamping holder MGM 600 L170mm – right-hand clamping holder with 170 mm overall length (Teknik Makina) The Grooving clamping holder MGM 600 L170mm is a purpose-built clamping solution for MGM 600 indexable inserts, engineered for right-hand grooving and parting operations in production and repair workshops Fits MGM 600 indexable inserts (Korloy) Robust 32 mm clamping head width 170 mm overall length, 25 mm max cutting depth Stable clamping for consistent groove quality The holder delivers a rigid interface between toolpost and insert, with a 32 mm clamping head and a compact L170 mm body that reduces overhang and vibration. The resulting stability improves surface finish and tool life by lowering chatter during parting and grooving, which is critical where dimensional repeatability matters. The toolholder’s mass (approx. 1.272 kg) contributes to damping without sacrificing manoeuvrability, so cycle times remain competitive while tolerances are held. Fast, repeatable set-up that lowers downtime Designed for straightforward assembly, the holder uses an M8x22 clamping screw and a 6 Allen key interface for secure fixation. The ISO 3232 clamping geometry provides repeatable positioning of the insert, simplifying index changes and reducing set-up variance across batches. For operations that demand quick tool changes, this configuration minimises machine downtime and supports predictable process control — a clear efficiency gain for small series and serial production alike. Broad compatibility and workshop fit Compatibility with MGM 600 indexable inserts (Korloy) makes the holder a versatile choice across common insert ranges, while the right-hand cutting orientation and 25 mm maximum cutting depth accommodate deeper grooving tasks without additional tooling. The clamping head width and insert seating are suited to both lathe and turning-centre applications where stable parting is required. The compact footprint and standardised fastening mean the holder integrates easily into established tooling sets and tool magazines. Contact Metav Werkzeuge for a tailored recommendation or to arrange supply of the Teknik Makina grooving clamping holder D687-1TM and additional compatible inserts Technical data SKU: D687-1TM Label: Stechklemmhalter MGM 600 L170mm Product type: Grooving clamping holder Manufacturer: Teknik Makina Facts Overall length: 170 mm Weight: 1.272 kg Clamping head width: 32 mm Clamping head height: 32 mm Cutting head width: 32 mm Insert cutting width: 6 mm Max cutting depth: 25 mm Cutting direction: right Clamping screw: M8x22 Allen key: 6 Allen Compatible inserts: MGM 600 Compatible insert manufacturer: Korloy ISO designation: 3232 ECLASS: 21181005 Special features Suitable for MGM 600 indexable inserts Right-hand grooving and parting orientation Standardised ISO seating for repeatable positioning Compact design for reduced overhang and vibration Robust clamping screw and Allen-key fixation FAQ What insert series fits this clamping holder? The holder is designed for MGM 600 indexable inserts and is compatible with Korloy MGM 600 inserts for reliable seating and repeatable cutting geometry. What is the maximum grooving depth achievable with this holder? The grooving clamping holder supports a maximum cutting depth of 25 mm, suitable for deeper parting and grooving operations where the insert geometry allows. Which direction of cut is this holder intended for? This clamping holder is configured for right-hand cutting, optimised for conventional right-hand grooving and parting setups. What fastening hardware is used for the clamping mechanism? Fixation is achieved with an M8x22 clamping screw, tightened with a 6 Allen key for secure and repeatable clamping. What is the article number or SKU for ordering? The product is listed as D687-1TM, referenced as the Teknik Makina grooving clamping holder for MGM 600 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Grooving Clamp Holder for MGM 800 Indexable Inserts 8mm Cutting Width, Left-Hand - Teknik Makina
Take advantage of a precise combination of compatibility with MGM 800 indexable inserts, a sturdy 25 × 25 mm clamping area and a 170 mm overall length for reliable parting operations; order directly via Metav Werkzeuge or contact our consultants for application advice. Grooving clamp holder MGM 800 L170 mm — left-hand parting holder by Teknik Makina The Grooving clamp holder for MGM 800 indexable inserts is a left-hand parting and grooving solution designed for stable, repeatable cuts in production and workshop environments. Compatible with MGM 800 indexable inserts Left-hand cutting orientation for parting 170 mm overall length for deeper grooves 25 × 25 mm clamping area with 32 mm cutting face Stable compatibility that reduces setup time and scrap The holder is engineered for direct use with MGM 800 indexable inserts and inserts from Korloy, ensuring fast tool changes and repeatable seating. This compatibility simplifies inventory management and reduces downtime compared with bespoke tooling solutions. The left-hand orientation supports conventional parting cycles and is particularly suited to setups where the toolpath requires a left-facing approach. The clear match to common insert standards means fewer seating errors and a more predictable machining result. Robust design for vibration control and consistent clamping A compact clamping area of 25 mm by 25 mm and an ISO designation of 3232 create a stable interface between tool and workpiece. The holder’s clamping system uses an M8×22 clamping screw and a 6 mm Allen key for secure tightening, supporting high repeatability across successive workpieces. The overall weight of 1.279 kg contributes to damping during parting operations, which helps preserve insert life and maintain surface finish, while the solid construction reduces the need for frequent re‑adjustment. Reach and cutting control for deeper grooves With an overall length of 170 mm and a cutting‑head width of 32 mm, the holder accommodates deeper parting operations up to a maximum cutting depth of 30 mm and a cutting width of 8 mm. This geometry enables controlled chip formation and stable cutting forces in narrow grooves, which is especially beneficial when machining prismatic parts or when precise part separation is required. The design also supports predictable tool behaviour, making cycle planning and downstream handling simpler. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina grooving clamp holder with existing tooling systems and to discuss MGM 800 insert options — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D621-3TM Manufacturer: Teknik Makina Product type: Grooving clamp holder Compatibility: MGM 800 indexable inserts (Korloy) Core specifications Overall length: 170 mm Weight: 1.279 kg Holder width: 25 mm Holder height: 25 mm Cutting-head width: 32 mm Maximum cutting depth: 30 mm Cutting width: 8 mm Materials & features ISO designation: 3232 Clamping screw: M8x22 Allen key: 6 mm Cutting orientation: left SKU: D621-3TM FAQ Which inserts fit this holder? The holder is designed for MGM 800 indexable inserts and is compatible with inserts from Korloy; the fit and seating match common MGM‑800 insert geometries. What is the maximum cutting depth achievable? Maximum cutting depth for this holder is 30 mm, allowing for deeper parting and grooving operations while maintaining stability. Which screw and tool are required for clamping? Clamping is by an M8×22 screw using a 6 mm Allen key, ensuring secure seating and straightforward maintenance. Is this holder left‑hand or right‑hand oriented? This grooving clamp holder is specified for left‑hand cutting orientation, suitable for workflows requiring a left‑facing toolpath. Can this holder be used for heavy‑duty parting? The robust 25 × 25 mm clamping area, solid mass and precise ISO interface provide good vibration control for demanding parting tasks in compatible setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Klemmhalter 27 ER For Outside Thread Right, SER 3232, P27-ER27, Innenkühlung, Rechtsschneidend - Teknik Makina
Take advantage of the holder's combination of precise clamping, compatibility with standard 27 ER indexable inserts and easy service using a T20 Torx key; order through Metav Werkzeuge or consult their specialists for a reliable supply from Emmerich. Clamping holder (Klemmhalter) SER 3232 — right-hand, 32 × 32 mm, for 27 ER inserts (Teknik Makina) A Clamping holder (Klemmhalter) SER 3232 engineered for right-hand external thread turning, compatible with P27-ER27 toolholders and designed for fast, repeatable set-ups. Right-hand cutting direction Holds 27 ER indexable inserts 32 × 32 mm clamping face 40 mm cutting height, 170 mm overall length Secure clamping that supports consistent thread turning The clamping holder is built to keep the tool geometry stable over extended cycles. With an ISO designation SER 3232 and a secure fastening system using an M5x18 Torx screw accessed by a T20 key, the assembly reduces micro-movement at the insert seat and thus improves repeatability. The robust construction and precise seat for 27 ER indexable inserts make the device suitable for repetitive external thread operations where dimensional consistency is essential. Reduced rework and quicker verification contribute directly to predictable process outcomes. Faster set-up and process stability for workshop throughput A clear operational benefit derives from the combination of a 32 × 32 mm clamping face, 40 mm cutting height and a 170 mm overall length: these dimensions provide the necessary clearance and rigidity for common turning set-ups while remaining compact enough for tight toolpost layouts. Compatibility with the P27-ER27 toolholder format simplifies tooling procurement and replacement, shortening changeover times. The result is a measurable improvement in cycle-to-cycle stability and reduced set-up time, which supports higher net productive time on the lathe. Practical serviceability to reduce downtime Service and on-bench handling have been considered in the holder's design: the Torx fastening arrangement allows safe, repeatable torque application with a T20 key and a standard M5x18 screw, enabling quick insert changes and maintenance. At ~1.405 kg the component strikes a balance between mass for vibration damping and manageable weight for manual handling. Supplied compatibility with the TA064 U‑plate and clear reference to the matching bar designation P27-ER27 supports straightforward integration into existing tooling systems, helping workshops maintain continuous operation with minimal adjustment. For reliable right-hand external thread machining choose the Teknik Makina clamping holder — contact Metav Werkzeuge for tailored advice and prompt delivery from Emmerich. Technical data SKU: D492TM Manufacturer: Teknik Makina ECLASS: 21181004 ISO designation: SER 3232 Compatible bar/toolholder: P27-ER27 Compatible insert type: 27 ER U-plate: TA064 Core specifications Clamping face width: 32 mm Clamping face height: 32 mm Cutting height: 40 mm Overall length: 170 mm Weight: 1.405 kg Torx key: T20 Torx screw: M5x18 Features and compatibility Right-hand cutting direction Holds 27 ER indexable inserts P27-ER27 bar compatibility TA064 U-plate fitment ISO SER 3232 designation Robust, workshop-oriented design FAQ Which inserts are compatible with this clamping holder? The clamping holder (Klemmhalter) SER 3232 accepts 27 ER indexable inserts and is specified for use with the matching P27-ER27 toolholder configuration. Is the holder suitable for right-hand external thread turning? Yes — the design states a right-hand cutting direction and is intended specifically for external thread operations in that orientation; the holder is identified as SER 3232 (SKU D492TM). What tools are required for insert changes and maintenance? Insert retention uses an M5x18 Torx screw, accessible with a T20 Torx key for secure, repeatable clamping. Can the holder be integrated into existing toolposts and bars? Integration is simplified by the holder's compatibility with P27-ER27 bars and the TA064 U-plate, allowing use with common turning tool systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com
170mm Stechklemmhalter 25mm Cutting Width 2525 5C-R MGM For 5C MGM Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Reliable production-grade parting and grooving performance thanks to a 25 mm cutting-head width, right-hand cutting direction and a compact 170 mm overall length; ideal for integration with Korloy 5C MGM inserts. Order direct via Metav Werkzeuge or consult the technical team for application guidance. Parting clamp holder — 25 mm cutting-head, right-hand by Teknik Makina The parting clamp holder is designed for precision parting and grooving on lathes and CNC turning centres, compatible with Korloy 5C MGM indexable inserts 25 mm cutting-head width Right-hand cutting direction Compatible with Korloy 5C MGM inserts 170 mm overall length Consistent parting accuracy for uninterrupted machining This holder delivers a stable clamping concept that supports repeatable parting and grooving operations. The 25 mm cutting-head width provides a defined contact area that reduces lateral vibration and maintains a clean kerf, while the right-hand orientation suits standard lathe feed directions. By pairing the holder with Korloy 5C MGM inserts the system benefits from a proven insert geometry that promotes reliable chip control. The combination of these features reduces the need for frequent adjustments and contributes directly to predictable cycle times on production runs. Easy integration into existing tooling setups Designed with standard designations in mind, the holder uses the ISO 2525 format and accepts a 5C-R MGM shank configuration, which simplifies tool selection and mounting. The overall length of 170 mm balances reach and rigidity, making it suitable for both close-coupled and slightly extended setups without compromising stability. Clear specification of insert compatibility and ISO designation enables quick verification during tool changeovers and supports efficient toolroom workflows, reducing setup complexity for operators and planners. Durable behaviour under shop-floor conditions Built for regular workshop use, the parting clamp holder combines compact geometry with a secure clamping interface to keep inserts firmly seated during interrupted cuts. The solid build and straightforward interface with 5C MGM inserts result in fewer insert slippages and a reduced frequency of rework. This reliability translates into lower downtime and makes the holder a cost-effective choice for small-batch production as well as higher-volume turning work where consistent part quality is required. Contact Metav Werkzeuge for availability, technical clarification and order processing of the Teknik Makina parting clamp holder D962TM — expert advice and quick delivery from Emmerich guarantee a reliable supply chain. Technical data SKU: D962TM Manufacturer: Teknik Makina Product name: Parting clamp holder ISO designation: 2525 Compatible inserts: Korloy 5C MGM Bore bar designation: 5C-R MGM Cutting direction: right Cutting-head width: 25 mm Overall length: 170 mm Core technical figures Cutting-head width: 25 mm Overall length: 170 mm Intended cutting direction: right-hand ISO designation: 2525 Versions and special features Compatible inserts manufacturer: Korloy Insert type: 5C MGM Bore bar / shank: 5C-R MGM SKU: D962TM FAQ What insert type fits this holder? The holder accepts 5C MGM indexable inserts and is specified for Korloy 5C MGM insert geometries. Is the cutting direction fixed? Yes, the tool is supplied for right-hand cutting applications and is optimised for conventional lathe feed directions. What is the overall length and how does that affect rigidity? The overall length is 170 mm; this length balances reach with stiffness to provide good rigidity for standard parting and grooving tasks. Which ISO designation applies to the holder? The holder follows ISO 2525, facilitating compatibility checks and straightforward integration into established tool inventories. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Stechklemmhalter 4mm Cut Width, 25mm Stech Depth, 25mm Head Width, 3C-R MGM, 4C MGM For Indexable Inserts, Right-Hand Cutting, Innenkühlung - Teknik Makina
Take advantage of a compact clamp-style design combined with a 4 mm cutting width and a 25 mm maximum grooving depth to achieve precise, repeatable parting and grooving operations; order directly via Metav Werkzeuge or request technical guidance for optimal integration into existing tooling setups. Stechklemmhalter D963TM — clamp-style parting and grooving toolholder, 4 mm cutting width (Teknik Makina) A Stechklemmhalter D963TM for right-hand parting and grooving applications, engineered to accept Korloy 4C MGM inserts and to deliver consistent performance in production turning operations 4 mm cutting width for narrow grooves Max grooving depth 25 mm 25 mm cutting head width Right-hand cutting direction Compatible with Korloy 4C MGM inserts Consistent groove quality through defined cutting geometry The clamp-style design provides a secure seat for indexable inserts, which stabilises the cutting edge and reduces vibration; the result is consistent groove dimension and improved surface finish. The 4 mm cutting width is intended for narrow slotting and parting tasks where control and repeatability matter. By combining a rigid clamping arrangement with a modest tool mass, the holder supports reliable chip formation and predictable tool life in medium-duty turning cycles Robust clamping for repeatable set-up and long tooling life A robust clamping mechanism ensures the insert remains locked during interrupted cuts and high radial loads. The holder’s 25 mm head width and secure screw clamp reduce micro-movement at the cutting edge, delivering repeatable set-ups and minimising rework. Because the assembly is straightforward, changeover times are reduced and process stability is improved — relevant benefits for batch production and workshop environments Easy integration with existing turning systems Designed with industry-standard interfaces, the toolholder uses the 3C‑R MGM shank designation for straightforward mounting. Compatibility with Korloy 4C MGM inserts simplifies procurement and inventory management, since widely available insert geometries can be used. The right-hand cutting orientation is suitable for conventional lathe set-ups where turning tools approach the workpiece from the operator’s left to right Application guidance for productive machining workflows With an overall length of 170 mm and a compact mass of 0.727 kg, the holder balances accessibility and rigidity for both external and internal grooving set-ups where reach and clearance are required. The 25 mm maximum grooving depth enables substantial engagement for deep slots while remaining within a safe range for standard indexable inserts. For process optimisation, pairing the holder with inserts from the specified manufacturer yields the greatest performance consistency Contact Metav Werkzeuge for application advice or component recommendations for the Teknik Makina clamp holder — Metav Werkzeuge provides technical support from Emmerich and can assist with selection and integration Technical data Article number: D963TM Name: Stechklemmhalter Manufacturer: Teknik Makina Weight: 0.727 kg Overall length: 170 mm Facts Head width: 25 mm Cutting width: 4 mm Max grooving depth: 25 mm Cutting direction: right Special features ISO designation: 2525 Compatible inserts: Korloy 4C MGM Shank designation: 3C‑R MGM FAQ Which insert types fit this holder? The holder accepts Korloy 4C MGM indexable inserts as specified for the D963TM and is optimised for those geometries What is the maximum grooving depth? Maximum grooving depth for this clamp-style holder is 25 mm, enabling deeper slotting within recommended insert limits Is the toolholder for right-hand cutting only? Yes, the tool is specified for right-hand cutting, suitable for standard lathe orientations with right-hand approach What are the key dimensions for mounting and reach? Overall length is 170 mm and head width is 25 mm, providing a compact reach with stable support Which shank designation is used for machine compatibility? Shank designation 3C‑R MGM is applied for the D963TM to match common turning tool posts and holders Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Stechklemmhalter 4mm Cutting Width, 18mm Max Depth, 3232, 4C-R GRP, For 4C GRP Inserts, Innenkühlung, Rechtsschneidend - Teknik Makina
Take advantage of a robust, right-hand parting holder that combines consistent clamping, narrow 4 mm cutting width and a 18 mm maximum cutting depth to maintain stable parting operations. The holder's compact profile and ISO designation support seamless integration into existing tool setups; order via Metav Werkzeuge or consult the specialists for exact matching inserts and delivery. Parting Tool Holder D772TM — Right-hand parting holder, 4 mm cutting width (Teknik Makina) A Parting Tool Holder D772TM for right-hand grooving and parting operations, designed for compatibility with ISCAR 4C GRP inserts and standard shank interfaces Right-hand orientation for standard turning setups 4 mm cutting width for narrow parting operations Max cutting depth 18 mm for deeper grooving Compatible with ISCAR 4C GRP inserts Stable parting performance that reduces rework The holder is engineered to deliver consistent cut geometry for parting and grooving tasks. With a 4 mm cutting width and an 18 mm max cutting depth, the design focuses on keeping forces predictable during engagement, which reduces chatter and the risk of workpiece distortion. The right-hand orientation supports common lathe set-ups and simplifies tool inventory. This results in fewer rejected parts and a measurable improvement in process reliability when compared with generic clamping solutions. Compact, rigid design for quick set-up and low downtime A compact clamping area of 32 mm x 32 mm and a 170 mm overall length provide a small footprint while maintaining rigidity. The ISO 3232 designation and the matching shank reference 4C-R GRP ensure standardised mounting and repeatable positioning on turret systems. At 1.285 kg, the holder balances mass for stability without overloading the turret, making tool changeover faster and reducing machine idle time. Insert compatibility that simplifies tool management Compatibility with ISCAR 4C GRP inserts and the widely used 4C-R GRP shank family allows straightforward procurement and stocking. The use of familiar insert formats reduces the need for special tooling and shortens lead times for replacement parts. The holder’s clamping concept keeps the insert secure under interrupted cuts, improving insert life and lowering overall tooling costs. Ideal for workshops aiming to raise throughput This holder is suited to production and job-shop environments where predictability and uptime matter. The combination of narrow cutting capability, solid clamping and standard interfaces supports tasks from simple parting to more demanding grooving operations. Supplied specifications help planning for spindle loads and cycle times, while compatibility with established inserts reduces administrative overhead for tool purchasing. For precise parting and reliable delivery, request the Teknik Makina D772TM through Metav Werkzeuge — technical advice and availability are provided at Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D772TM Manufacturer: Teknik Makina ECLASS: 21181005 SKU: D772TM Facts Overall length: 170 mm Holder width: 32 mm Holder height: 32 mm Cutting head width: 32 mm Cutting width: 4 mm Max cutting depth: 18 mm Weight: 1.285 kg Cutting direction: right Special features Compatible with ISCAR 4C GRP inserts Shank designation: 4C-R GRP ISO designation: 3232 Application: parting / grooving FAQ Which inserts fit this holder? The holder accepts ISCAR 4C GRP type inserts; the matched shank designation is 4C-R GRP, ensuring standard insert fitment for the D772TM. Is the holder suitable for left-hand operations? This version is configured for right-hand cutting direction; left-hand operations require a left-hand variant. What is the maximum depth of cut? Maximum cutting depth is 18 mm, as specified for the D772TM, which helps plan process parameters and tool selection. What are the key dimensions for turret mounting? Key dimensions include a 32 mm holder width and height with an overall length of 170 mm, enabling straightforward turret accommodation. How heavy is the tool holder? The holder weight is 1.285 kg, chosen to balance rigidity and turret load for stable parting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17mm Grooving Blade For Indexable Inserts, Slotting Tool - Teknik Makina
Take advantage of precise material separation, flexible insert compatibility and streamlined procurement for uninterrupted production. The combination of a standardised ISCAR-compatible interface and a clear SKU reference (KL17TM) simplifies tool inventory and replacement. Order the parting blades directly via Metav Werkzeuge or ask their consultants if needed. Parting blades KL17TM — ISCAR-compatible parting and grooving blades by Teknik Makina The Parting blades KL17TM are precision-engineered parting blades intended for accurate grooving and parting operations where standard insert compatibility and straightforward procurement are decisive ISCAR-compatible insert interface Designed for grooving and parting operations SKU KL17TM for straightforward procurement Reduce scrap with consistent, controlled cuts High-priority for production environments is repeatable performance. These blades provide consistent kerf control and stable engagement with the workpiece, reducing the risk of chatter and limiting material waste. By using a standardised insert interface, the component enables predictable cutting behaviour, which in turn supports shorter cycle times and fewer reworks. The configuration therefore favours shops aiming to optimise throughput without compromising component tolerances or surface finish. Faster set-up and fewer spare parts Compatibility with a widely used insert system brings direct logistical benefits. An ISCAR-compatible interface allows the mounting of commonly available inserts, reducing the number of different spare items that must be stocked. This insert standardisation shortens changeover times and simplifies tool management for maintenance teams and purchasing departments alike. Clear identification via the KL17TM SKU supports fast reordering and rapid replacement, keeping machine downtime to a minimum and preserving overall equipment effectiveness. Supply reliability and a partner for precision Beyond the component itself, procurement certainty matters. Metav Werkzeuge acts as a quality filter for the European market, combining an extensive product range with dependable logistics from Emmerich. This supply model supports small and large workshops by making high-precision solutions accessible and by reducing supplier complexity. The result is improved planning reliability and fewer delivery surprises, which is particularly valuable for production lines where continuity and part quality are non-negotiable. For procurement advice or to order Teknik Makina KL17TM parting blades, contact Metav Werkzeuge's specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KL17TM Product type: Parting blades (Stechschwerter) Manufacturer: Teknik Makina Facts eClass: 21181018 SKU: KL17TM UID: KL17TM Special features Compatible with ISCAR indexable inserts Intended for grooving and parting operations Category: Machining › Parting blades FAQ Are these blades compatible with ISCAR inserts? Yes. The KL17TM parting blades feature an ISCAR-compatible insert interface, allowing the use of widely available ISCAR indexable inserts. What applications are suitable for these blades? The blades are intended for grooving and parting operations where standardised insert interchangeability and predictable kerf control are required. How does the KL17TM simplify tool management? Clear SKU labelling and compatibility with a common insert system reduce inventory complexity and speed up changeovers, which keeps downtime low. Can these blades be ordered through Metav Werkzeuge? Yes. The KL17TM is available via Metav Werkzeuge, which provides procurement support and reliable European distribution. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180mm Stech Tool Holder 4mm Cutting Width S20Q Shank, For 4C Inserts, 35mm Cut Height, 20mm Shank Diameter - Teknik Makina
Benefit from precise grooving performance with solid clamping and compatibility with ISCAR 4C indexable inserts; the robust 20 mm shaft and 35 mm cutting height provide stable, repeatable cuts for batch turning. Order the grooving clamp holder directly via Metav Werkzeuge or consult the specialists for tailored selection advice. Grooving clamp holder K676TM — 20 mm shaft, 4 mm cutting width (Teknik Makina) A grooving clamp holder engineered for secure parting and grooving in CNC turning applications, compatible with ISCAR 4C indexable inserts Solid clamping for repeatable grooving Compatible with ISCAR 4C indexable inserts 20 mm shaft for secure tool holding 4 mm cutting width for narrow grooves Consistent cuts and measurable productivity gains Precision in series production depends on stable toolholding and predictable geometry. The K676TM grooving clamp holder delivers both through a 20 mm shaft and a 35 mm cutting height, which together reduce vibration and improve edge engagement during parting and grooving cycles. Stable contact between holder and insert leads to improved repeatability and fewer rejects, which supports faster throughput and lower rework costs. The measured stability of the clamping system makes process parameters easier to reproduce across shifts and machines. Fast integration with established tool systems Designed for seamless integration on standard lathe set-ups, this holder accepts ISCAR indexable plates in the 4C format and matches the common boring bar ISO designation S20Q, simplifying tool management in mixed-tool environments. The 4 mm cutting width suits narrow groove requirements while the holder’s compatibility with a recognised plate size reduces the need for multiple specialised tool stocks. Clear mechanical interface data enables straightforward set-up and shortens changeover times, supporting leaner workshop operations. Robust handling and compact dimensions for workshop use With an overall length of 180 mm, a nominal diameter of 25 mm, and a mass of 0.461 kg, the tool achieves a balance between reach and rigidity. The clamping principle is engineered for secure retention of the insert during interrupted cuts, which benefits both finish quality and tool life. The compact footprint and predictable centre of mass also ease tool programming and collision avoidance in CNC routines, while the modest weight supports safe manual handling during tool changes. Application scope and recommended use cases This clamping holder is suited to precision parting and groove machining tasks in small to medium batch production and trade workshops that rely on indexable insert systems. The holder’s specification—S20Q interface, 4C insert format and defined cutting geometry—makes it a practical choice for operations aiming to standardise tooling across multiple turning centres. For process optimisation or bespoke holder variants, Metav Werkzeuge’s consultants can assist with selection based on machine capability and insert style. For reliable grooving with Teknik Makina’s precision clamping, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the K676TM and receive personalised ordering advice. Technical data Article number: K676TM Manufacturer: Teknik Makina eClass: 21181005 Brand: Teknik Makina Facts Shaft diameter: 20 mm Cutting height: 35 mm Cutting width: 4 mm Overall length: 180 mm Diameter: 25 mm Weight: 0.461 kg Special features Compatible with ISCAR 4C indexable inserts Boring bar ISO designation: S20Q Holder designation: 4C-R DGN Suitable insert size: 4C FAQ Which insert type fits this holder? The holder is compatible with ISCAR 4C indexable inserts, designed to accept standard 4C plates for grooving and parting. What are the key dimensions to check for machine setup? Essential dimensions are the 20 mm shaft diameter, 35 mm cutting height, 4 mm cutting width and 180 mm overall length, which determine clearance and clamping requirements for the K676TM. Is the tool suitable for CNC lathes used in small-batch production? Yes; the design of the grooving clamp holder supports precise, repeatable parting and grooving cycles typical in small to medium batch CNC turning. How does the clamping concept affect tool life and finish? The secure clamping reduces insert movement and vibration, which contributes to improved surface finish and extended insert life when machining under advised parameters. Can the holder be integrated with existing S20Q tool stocks? The holder uses the S20Q interface and is therefore compatible with systems that accommodate that boring bar designation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Grooving Bar For Indexable Inserts, Solid Holder - Teknik Makina
High-precision cut-off capability combined with proven compatibility for ISCAR indexable inserts ensures reliable parting operations and simplified tool planning. Benefit from straightforward reordering using SKU KL18TM via Metav Werkzeuge or contact our consultants for tailored advice. Parting Blades KL18TM — Teknik Makina parting blades with ISCAR insert compatibility The Parting Blades KL18TM are engineered as a compact, indexable-insert solution for precise cut-off and parting tasks in machining environments, suitable for integration with common toolholders and ISCAR insert systems. Teknik Makina quality manufacturing Compatible with ISCAR indexable inserts SKU KL18TM for quick reordering Consistent, controlled parting performance for production workflows The KL18TM family delivers a focused solution for cut-off operations where repeatability and process stability matter. The design concentrates on a narrow cutting profile to reduce chatter and allow predictable material separation; this inherently supports shorter cycle times and fewer scrap parts. By combining a defined cutting geometry with indexable insert use, the system reduces downtime for tool changes and keeps set-up effort to a minimum while maintaining consistent surface finish at the parting line. Seamless compatibility with ISCAR inserts and simplified tooling Compatibility with ISCAR indexable inserts means the KL18TM blades integrate into existing insert inventories and indexable tool strategies. The use of standard insert interfaces permits rapid replacement and economical use of carbide grades selected for specific workpiece materials. This approach reduces tool stock complexity while offering the benefits of replaceable cutting edges: less operator handling of brittle carbide, straightforward seating in the blade pocket, and predictable indexing accuracy that supports repeatable part dimensions. Practical application guidance and process advantages Parting and cut-off operations demand attention to clamping rigidity, correct speeds and feeds, and the right insert geometry. The KL18TM blades are designed to be mounted in common parting toolholders that accept narrow shank blades; correct clamping and minimal overhang are recommended to exploit the blade’s stability. The indexable insert arrangement facilitates selection of cutting grades for a range of workpiece types without changing the blade body, thereby supporting faster material changeovers and keeping the machine ready for the next operation. Procurement, stock policy and workshop integration made straightforward Ordering under SKU KL18TM simplifies procurement and inventory tracking. Metav’s position as a European supply partner offers dependable fulfilment from Emmerich and a broad portfolio that helps reduce supplier fragmentation. This makes it easier to standardise on tooling families and maintain consistent quality across multiple machines or sites. The combination of a modular insert system and a recognised manufacturer enables predictable tool life planning and smoother workshop logistics. For reliable supply of Teknik Makina parting blades (KL18TM) and expert advice on integrating them into existing tool setups, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930; Metav’s consultants will assist with selection and availability. Technical Data Article number: KL18TM Manufacturer: Teknik Makina eClass: 21181018 Facts SKU: KL18TM UID: KL18TM Special features Product type: Parting blades Compatibility: ISCAR indexable inserts Label: Stechschwerter FAQ What insert systems are compatible with these parting blades? The Parting Blades KL18TM are specified for use with ISCAR indexable inserts; the blade pockets accept the standard insert interface used by ISCAR for economical edge changes. Can the KL18TM be used in standard parting toolholders? Yes, the KL18TM blades are intended for mounting in conventional parting toolholders that accommodate narrow shank blades; correct clamping and minimal overhang are recommended to maintain stability. How does the indexable insert approach benefit workshop efficiency? Using indexable inserts with the KL18TM reduces downtime for edge changes, streamlines spare-part inventory, and allows selection of cutting grades without changing the blade body, supporting faster changeovers. Are special cutting parameters required for using these blades? Cutting parameters depend on workpiece material and insert grade; the KL18TM design benefits from firm clamping, controlled feeds and speeds, and inserts matched to the application to avoid chatter and extend edge life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Stechklemmhalter 3C For Wendeplatten, S25R, 3C-R-123 SDV, Innenkühlung - Teknik Makina
Take advantage of a rigid 25 mm shank and a compact 200 mm overall length for precise groove control, combined with compatibility for 3C Sandvik inserts to shorten setup time; order directly via Metav Werkzeuge or request specialist advice from our consultants. K720TM grooving clamp holder — Teknik Makina, 25 mm shank, 3C insert compatibility K720TM grooving clamp holder designed for grooving and parting operations with 3C indexable inserts, ideal for turned part production and workshop retrofit applications 25 mm shank for rigid clamping Compatible with 3C Sandvik inserts 3 mm cutting width for narrow grooves 200 mm overall length for stable reach Consistent groove quality through rigid shank design The robust clamping concept and 25 mm shank deliver high lateral stability during grooving and parting tasks, reducing chatter and rework. Because the holder is engineered for repeatable seating of indexable tooling, the result is consistent groove geometry and reliable surface finish. The compact 200 mm overall length maintains tool rigidity without compromising accessibility, which translates into fewer scrap parts and improved cycle reliability for batch production. Faster setup and broad insert compatibility Designed for standard 3C indexable inserts and compatible with recognised Sandvik geometries, the holder shortens tool changes and simplifies spare-part management. The supplied ISO reference S25R for the boring-bar interface and the designation 3C-R-123 SDV for the clamp variant indicate straightforward integration into common lathe tool posts. This compatibility reduces downtime and supports lean production by enabling swift insert swaps and predictable cutting behaviour. Precise narrow grooving and secure clamping With a 3 mm cutting width and a cutting height of 40 mm, the clamp holder is suited to fine grooving and parting-off where narrow kerfs are required. The secure clamp mechanism and balanced mass (approx. 0.784 kg) help maintain cutting stability, while the external diameter of 32 mm provides a compact footprint at the toolpost. These attributes make the product practical for workshops aiming for high precision without extensive fixture changes. Built for workshop reliability and smoother workflows The holder’s practical dimensions and compatibility with well-known insert systems support predictable maintenance intervals and easy stocking of consumables. Metav’s quality assurance and European distribution ensure that acquisition and replenishment are transparent and timely. The combination of technical fit and supply-chain reliability helps to keep production flowing and procurement simple. For a tailored recommendation or to secure the Teknik Makina K720TM grooving clamp holder, contact Metav Werkzeuge in Emmerich for specialist advice and delivery information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K720TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Suitable for inserts: 3C (Sandvik) Shank diameter: 25 mm Overall length: 200 mm Outer diameter: 32 mm Cutting height: 40 mm Cutting width: 3 mm Weight: 0.784 kg Boring-bar interface: S25R Clamp designation: 3C-R-123 SDV Insert type: 3C Application: Grooving / parting FAQ Which inserts fit this holder? The K720TM accepts 3C indexable inserts and is specified for compatibility with Sandvik 3C geometries, enabling straightforward replacement with standard grooving inserts. What shank and length does the tool use? This grooving clamp holder features a 25 mm shank and a 200 mm overall length, providing a balance of rigidity and reach for typical lathe setups. Is the K720TM suitable for narrow grooves? Yes; the holder supports a 3 mm cutting width and a cutting height of 40 mm, making it well suited to narrow kerf grooving and precise parting operations. Can this holder be used on common lathes? The S25R boring-bar interface and the compact form factor allow integration into standard tool posts and holders configured for a 25 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Clamping Holder SEL 2020 K16- IR16 For 16 IR Inserts Left-Cutting Innenkühlung - Teknik Makina
Take advantage of the holder's compact geometry and precise seating for consistent tool life and predictable cycle times; order the clamping holder directly via Metav Werkzeuge or contact our advisors for matching options. Clamping Holder SEL 2020 (16 IR) — Left‑hand, 125 mm The Clamping Holder SEL 2020 is a left‑hand toolholder designed for indexable 16 IR inserts, engineered for turning applications where a compact head and reliable clamping are required Left‑hand orientation for specific turning tasks Compatible with 16 IR indexable inserts Overall length 125 mm for stable mounting Compact head: 20 x 20 mm cutting interface Consistent rigidity for repeatable turning results The holder's compact cross section delivers rigidity where it matters: a 20 mm head and body width combined with a 30 mm cutting height ensure the insert seat remains aligned under load. This geometry reduces chatter and improves surface finish, which in turn lowers scrap rates and rework. The design supports predictable tool life through stable force transfer and consistent seat contact, making the component suitable for batch production and process standardisation. Standardised insert compatibility to simplify tooling management Designed for 16 IR indexable inserts and carrying the SEL 2020 ISO designation, this toolholder aligns with common insert inventories and ISO seating conventions. The left‑hand cutting direction is specified for operations where the tool must cut from the opposite approach; this avoids ambiguity during setup and clarifies tool planning across shifts. The holder also accepts bars designated K16‑IR16, streamlining the selection of matching boring bars and reducing the need for bespoke tooling. Compact form factor for stable clamping and space‑efficient layouts With an overall length of 125 mm and a net weight of 0.414 kg, the holder offers a stable mass for secure clamping without adding unnecessary overhang. The compact 20 x 20 mm cutting interface allows integration into tight toolposts and multi‑tool turrets, improving accessibility in confined setups. Reduced projection minimises bending moments at the insert, which benefits precision and extends the usable life of the indexable cutters. Built for workshop productivity and predictable maintenance The geometry and compatibility choices reduce tool change complexity and inventory variety, supporting faster changeovers and less downtime. Where process reliability is paramount, the clamping concept provides a secure seating that supports repeatability across multiple setups. Maintenance is straightforward: standardised inserts and familiar mounting interfaces mean spares and replacements are interoperable with established tool systems, helping to keep production running smoothly. For tailored recommendations on integrating the SEL 2020 clamping holder into existing toolsets, contact Metav Werkzeuge for technical advice and ordering support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: D510TM Manufacturer: Teknik Makina ISO designation: SEL 2020 Compatible inserts: 16 IR Facts Overall length: 125 mm Head width: 20 mm Body width: 20 mm Holder height: 20 mm Cutting height: 30 mm Weight: 0.414 kg eClass: 21181004 Special features Left‑hand cutting direction Fits insert type 16 IR Compatible with K16‑IR16 boring bar designation Designed for indexable insert turning applications FAQ What inserts fit this toolholder? The clamping holder accepts 16 IR indexable inserts; the SEL 2020 seat is matched to that insert family for secure seating. Is the holder suitable for left‑hand cutting only? Yes, the design specifies a left‑hand cutting orientation and is intended for operations that require that cutting direction. What are the key dimensions to check for machine compatibility? Check the 125 mm overall length, 20 x 20 mm head interface and the 30 mm cutting height to ensure proper fit and clearance. Can this holder be used in compact turrets or small toolposts? The compact head and moderate length make the holder appropriate for tight setups, where reduced overhang improves stability. Which manufacturer produces this holder and where can it be sourced? The item is produced by Teknik Makina (designation SEL 2020, SKU D510TM) and is available through Metav Werkzeuge for procurement and technical queries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Grooving Clamp Holder 11.6mm Cut Width, 3.5mm Max Grooving Depth - Teknik Makina
Take advantage of a compact combination of rigid clamping, precise parting capability and easy maintenance to keep turning operations productive. Order the parting tool holder directly via Metav Werkzeuge or consult our experts for application-specific advice. Parting Tool Holder K837TM — 20 mm, S16R shank, 200 mm length The Parting Tool Holder K837TM is a robust S16R-shank holder designed for secure clamping of 20 mm parting blades in precision turning and grooving operations. S16R shank for rigid toolpost mounting Compatible with 20 mm parting blades 200 mm overall length for extended reach Torx T8 fastening with M2.5x7 screw Stable parting and clean separation for higher output Engineered for repeatable parting operations, this holder features a S16R shank and compatibility with 20 mm parting blades, delivering the rigidity required to avoid chatter and dimensional drift. The 11.6 mm cutting-head width and a 25 mm cutting height ensure stable blade support, so each cut results in a consistent finish. With these characteristics, shops benefit from reduced rework and increased throughput when performing groove turning or cut-off tasks on conventional and CNC lathes. Rapid blade changes and low downtime through simple fixing Designed for workshop efficiency, the clamping system uses a Torx T8 interface and an M2.5x7 screw for secure, repeatable fastening. The straightforward assembly reduces tool change time and minimises production interruptions; the parting blade can be clamped or released quickly while maintaining alignment. The holder’s maximum parting depth of 3.5 mm supports common profiling and cut-off tasks without compromise, and the low mass of 0.302 kg contributes to nimble handling during set-ups and inspections. Versatile reach and reliable supply for everyday workshop use With a 16 mm shank diameter and an overall length of 200 mm, this holder provides extra reach where extended tool projection is required, while remaining compatible with standard toolposts that accept S16R tooling. The unit suits general turning and grooving workflows in production and repair shops that require a dependable, easy-to-service solution. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component is backed by a dependable logistics and quality-filter setup from Emmerich, helping to ensure consistent availability for industrial and craft applications. Contact Metav Werkzeuge for tailored advice and fast supply of Teknik Makina parting tool holders and related tooling solutions Technical data Article number: K837TM Product type: Parting tool holder Label: 20mm Stechklemmhalter L200mm Manufacturer: Teknik Makina Facts Shank diameter: 16 mm Overall length: 200 mm Weight: 0.302 kg Compatible blade diameter: 20 mm Cutting head width: 11.6 mm Special features Shank type: S16R Cutting height: 25 mm Max parting depth: 3.5 mm Fastening: Torx T8, screw M2.5x7 SKU: K837TM FAQ Which blade size fits this holder? The holder is designed for 20 mm parting blades; compatibility is ensured by the clamping geometry of the Parting Tool Holder K837TM. What shank must the toolpost accept? This holder uses an S16R shank and a 16 mm shank diameter, so the toolpost must be compatible with S16R-style mounting. How deep can the holder part off in a single pass? The maximum parting or plunge depth specified for the holder is 3.5 mm, which suits standard separation operations. Which fastening method secures the blade? Blade clamping is effected via a Torx T8 interface and an M2.5x7 screw to provide repeatable, rigid fixation for safe operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Grooving Clamp Holder 11.6mm Head Width, 3.5mm Max Grooving Depth - Teknik Makina
Benefit from a compact, stiff design that combines an S16R 16 mm shank with a 20 mm cutting capacity and a precise 3.5 mm maximum parting depth for reliable, repeatable parting operations; order the holder directly via Metav Werkzeuge or consult the technical team for integration advice. Parting tool holder K838TM — 20 mm capacity, L 200 mm (Teknik Cutting Tools) Parting tool holder K838TM is a clamping solution for precise parting and grooving on CNC lathes and turning centres, designed to secure stable cutting performance in workshop and production environments. S16R shank with 16 mm diameter 20 mm cutting capacity, overall length 200 mm Max cutting depth 3.5 mm for precision parting Torx T8 fasteners and M2.5x7 screw for reliable clamping Precision engineering for consistent parting results The holder is built around the S16R shank format and a 16 mm shaft diameter, providing a familiar interface for standard toolposts and reduced set-up time. The 20 mm nominal cutting capacity and 11.6 mm cutting-head width translate into narrow, controlled parting cuts that limit deflection and vibration. This configuration helps to maintain surface finish and concentricity during interrupted cuts while supporting high-repeatability production runs. The design prioritises rigidity and geometric stability, which converts into fewer rejects and less rework for routine turning operations. Stable setup and predictable cutting performance With an overall length of 200 mm and a cutting height of 25 mm, the holder strikes a balance between accessibility and stiffness for medium-reach parting tasks. The documented maximum parting depth of 3.5 mm is intended for precise, shallow-to-moderate depth cuts where control is essential. At just 0.302 kg, the assembly is light enough for quick tool changes but engineered to dampen chatter when clamped correctly. Clear, measurable specifications make it straightforward to calculate tool overhang, reachable diameter and clamping torque requirements for defined machining strategies, reducing the need for trial-and-error during process setup. Practical serviceability and workshop integration Maintenance and repeatable clamping are simplified by the use of Torx T8 drive elements and the M2.5x7 fixing screw, enabling fast insert and clamp replacements with standard hand tools. As a compact parting tool holder, K838TM is ready for direct integration into existing tool posts and post-type toolholders that accept the S16R standard. The compact head geometry reduces interference for close-proximity cutting and eases access in multi-tool turrets. For supply reliability and tailored advice on fixture compatibility, Metav Werkzeuge provides local sourcing and technical consultation to support seamless workshop adoption. Arrange tailored technical advice and secure prompt delivery from Metav Werkzeuge — contact the Metav team for specification matching and ordering from Emmerich. Technical data Article number: K838TM Product: Parting tool holder Brand: Teknik Makina Facts Diameter: 20 mm Shank diameter: 16 mm Overall length: 200 mm Cutting head width: 11.6 mm Cutting height: 25 mm Max parting depth: 3.5 mm Weight: 0.302 kg Special features Shank designation: S16R Torx key: T8 Torx screw: M2.5x7 Product type: Stechklemmhalter / parting tool holder Category: Machining > Clamping holders FAQ What shank size is required for this holder? The holder uses the S16R standard and accepts a 16 mm shank format for secure mounting in compatible toolposts. What is the maximum parting depth? Maximum parting depth is 3.5 mm, suitable for controlled, precise parting and grooving operations. Which overall length should be expected when planning tool overhang? Overall length is 200 mm, which should be considered when calculating overhang to preserve rigidity. What fastening hardware is used for the clamping assembly? Clamping and service use Torx T8 drive elements and an M2.5x7 screw for reliable, repeatable tightening. Is the holder suitable for turret and post-style toolholders? The geometry and S16R shank designation make the holder compatible with standard post-style toolholders and turrets that accept the S16R format; confirm turret clearance and toolpost interface before installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Grooving Clamping Holder 3C GRP, 3mm Cut Width, 18mm Max Grooving Depth, Right-Handed, 2020, 3C-R GRP, For 3C GRP Inserts, Innenkühlung - Teknik Makina
Take advantage of a rigid, right-hand holder that delivers narrow, repeatable grooves thanks to its 3 mm cutting width and 20 mm shank dimensions; order through Metav Werkzeuge or contact our consultants for application advice. Grooving clamp holder D773TM — right-hand parting and grooving tool by Teknik Makina The grooving clamp holder D773TM is a right-hand toolholder designed for precise parting and grooving with ISCAR 3C GRP inserts, suited to small and medium lathes where narrow cuts and stable clamping are essential. Right-hand toolholder for precise grooving Compatible with ISCAR 3C GRP inserts 20 mm shank and head width for stable clamping 3 mm cutting width for narrow parting cuts Deliver narrow, repeatable grooves for reduced rework The holder delivers consistent results for fine grooving and parting operations thanks to its 3 mm nominal cutting width and a maximum grooving depth of 18 mm. These measurable parameters support process control: narrow cuts reduce material waste and minimise the need for secondary finishing, while the defined maximum depth ensures safe engagement in a single pass where applicable. With a total length of 125 mm, the tool provides sufficient reach for common centre-turning setups without excessive overhang, contributing to predictable cycle times and consistent part quality. Rigid design for vibration dampening and longer insert life A 20 mm shank height and matching head width provide greater stiffness at the cutting zone, which limits chatter and improves surface finish. The secure clamp arrangement is engineered for stable clamping, reducing micro-movements that accelerate insert wear. The holder’s modest mass of 0.409 kg balances rigidity with manageable tool-change handling on the shop floor. As a result, toolholders of this build help extend the lifetime of indexable inserts and maintain dimensional accuracy across production batches. Simple integration with established insert systems Compatibility with ISCAR 3C GRP inserts and the ISO designation 2020 simplifies procurement and inventory management by allowing the use of widely available insert formats. The holder’s shank designation 3C-R GRP matches common lathe toolpost setups, enabling straightforward replacement of existing tooling. The right-hand cutting orientation is optimised for conventional turning directions; this predictable orientation makes process planning easier and reduces the chance of setup errors. Suited to both jobbing and small-scale production Engineered for shop-floor reliability, this clamp holder is a practical choice where precision grooves and narrow parting cuts are frequent. The combination of a compact overall length, rigid cross-section and standardised insert interface supports rapid tool swaps and straightforward maintenance routines. For facilities that aim to streamline suppliers without sacrificing capability, this holder integrates into existing workflows and contributes to steady throughput with reduced scrap rates. For tailored application support or to secure the grooving clamp holder D773TM from Teknik Makina for production use, contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich. Technical Data Article number: D773TM Manufacturer: Teknik Makina Product name: Grooving clamp holder D773TM Compatible inserts: ISCAR 3C GRP Cutting direction: Right ISO designation: 2020 Facts Overall length: 125 mm Weight: 0.409 kg Cutting width: 3 mm Max grooving depth: 18 mm Shank / holder height: 20 mm Shank / head width: 20 mm Holder width: 20 mm Special features For parting and grooving applications Shank designation: 3C-R GRP Right-hand cutting orientation Suitable for ISCAR 3C GRP indexable inserts FAQ What type of inserts does this holder accept? The grooving clamp holder D773TM accepts ISCAR 3C GRP indexable inserts; the ISO reference on the holder is 2020 to match common insert formats. Is the D773TM suitable for deep grooving operations? The holder supports a maximum grooving depth of 18 mm; for deeper cuts, reassess tool engagement and machine rigidity before proceeding. Which cutting direction is this tool designed for? This holder is configured for right-hand cutting; the right-hand orientation is built into the clamp and head geometry. How does the 20 mm shank dimension benefit machining? A 20 mm shank height and head width increase stiffness at the cutting zone, reducing vibration and extending insert life in production environments. Can this holder be used in standard lathe toolposts? Yes — the shank designation 3C-R GRP and the standardised ISO 2020 interface make the holder compatible with common lathe toolpost setups and insert inventories. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Grooving Toolholder 2mm Cutting Width, 16mm Max Cut Depth, ISO 2020, For 2C TD Inserts, Right-Handed Cutting, Internal Cooling - Teknik Makina
Take advantage of precise clamping, standardised insert compatibility and a compact overall length for predictable parting and grooving performance; order directly via Metav Werkzeuge or consult the specialists for machining-specific advice. Parting Tool Holder – right‑hand parting and grooving tool, ISO 2020 by Teknik Makina The Parting Tool Holder is a right‑hand clamping device for lathe parting and grooving operations, designed to accept 2C TD indexable inserts and deliver repeatable results in short‑run and batch production. Right‑hand cutting direction Compatible with 2C TD indexable inserts ISO 2020 clamping size, 20 mm dimensions 2 mm cutting width, max 16 mm cutting depth Predictable performance with standardised clamping The holder is built around the ISO 2020 clamping standard, which means a 20 mm square shank profile and widespread insert availability. This standardisation reduces downtimes associated with sourcing unusual tooling sizes and simplifies tool setup: shops benefit from consistent insert fitment and straightforward replacement. The compact 125 mm overall length and robust clamping geometry deliver a stable cutting position, improving dimensional repeatability in parting and groove operations. Optimised geometry for efficient parting and groove control A narrow 2 mm cutting width combined with a maximum 16 mm parting depth supports precise material separation while limiting cutting forces. The right‑hand orientation suits conventional lathe configurations and allows predictable chip flow when matched with the correct insert geometry. The tool’s design prioritises controlled chip evacuation and vibration damping to reduce rework and enhance surface finish, contributing to faster cycle times and fewer rejected parts. Compatibility and flexibility for workshop supply chains Designed to accept 2C TD indexable inserts and to be compatible with Taegutec insert ranges, the holder integrates into existing tooling kits without the need for special adapters. The bores and mounting geometry follow common lathe toolpost conventions, enabling quick swaps between holders. At a weight of 0.401 kg, the component is light enough for handheld handling during setup yet rigid enough for stable cutting at moderate feeds and depths. Clear advantages for purchasing and maintenance Using a standard clamping size and widely supported insert form factor lowers inventory complexity and total cost of ownership. The holder’s simple clamping screw and accessible contact surfaces make routine inspection and insert changes straightforward, reducing time at the bench. For operations focused on repeatability and predictable throughput, this clamping device offers a balance of accessibility and machining capability that supports both one‑off jobs and short production runs. For tailored advice on the Teknik Makina parting tool holder and prompt supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: D716TM Manufacturer: Teknik Makina Product: Parting tool holder SKU: D716TM Facts Clamp height: 20 mm Holder width: 20 mm Cutting head width: 20 mm Cutting width: 2 mm Max cutting depth: 16 mm Overall length: 125 mm Weight: 0.401 kg Cutting direction: right Special features Compatible with 2C TD indexable inserts Suitable for Taegutec insert types ISO 2020 clamping size Bohrstangen designation: 2C‑R TD FAQ Which inserts fit this holder? The holder accepts 2C TD indexable inserts; it is compatible with common Taegutec 2C TD insert variants. Is the holder suitable for left‑hand lathes? This version is manufactured for right‑hand cutting direction; a left‑hand variant would be required for opposite‑direction operations. What does ISO 2020 mean for everyday use? ISO 2020 denotes a 20 × 20 mm square shank and a standard insert/clamping interface, simplifying insert sourcing and ensuring interchangeability across compatible holders. How deep can the tool cut safely? The nominal maximum parting depth is 16 mm; actual safe limits depend on machine rigidity, material and insert geometry. Will this holder work on small lathes? With a compact 125 mm overall length and 0.401 kg mass, the holder suits many standard lathes; compatibility with the machine’s toolpost and clearance should be confirmed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Grooving Toolholder 5mm Cutting Width, 22mm Max Plunge Depth, ISO 2020, 5C-R S229, Internal Coolant, Right-Hand Cutting - Teknik Makina
Combine the 5 mm cutting width, 22 mm maximum plunge depth and Horn-compatible ISO 2020 clamping for stable, repeatable parting operations; order the parting clamp holder directly via Metav Werkzeuge or contact our specialists for application advice. Teknik Makina parting clamp holder D696TM — right-hand, 5 mm cutting width A parting clamp holder for lathe grooving and parting tasks, designed for right-hand cutting and compatible with Horn inserts in ISO 2020 format Right-hand cutting direction Compatible with Horn inserts Max plunge depth 22 mm 125 mm overall length Stable seating for consistent parting quality The holder delivers a stable clamping interface thanks to its 20 x 20 mm clamping head dimensions, which reduce vibration and support a secure insert seat. That stability directly improves edge life and repeatability when separating components or grooving profiles. The cutting width 5 mm is well suited to common parting and grooving tasks, providing a balance between material removal and chip control. For workshops migrating between insert systems, the ISO 2020 format ensures straightforward replacement and familiar indexing, lowering setup time and risk of incorrect insert selection. Workflow benefits and machinability explained Engineered for efficient lathe workflows, the toolholder’s right-hand cutting orientation and max plunge depth 22 mm enable effective infeed strategies for standard parting operations. The 125 mm overall length gives a compact footprint while maintaining adequate reach for many turret and toolpost configurations; its modest 0.389 kg weight keeps inertia low for fast, precise starts and stops. The holder’s designation 5C-R S229 references the shank/bores interface used in common toolpost systems, helping workshop planners confirm mechanical compatibility with existing bar and turret setups and reduce integration time. Compatibility, installation and care made straightforward Compatibility with Horn-specified inserts simplifies procurement and ensures access to proven grades and geometries. The 2020 designation indicates an insert seat designed for 20 x 20 mm turning plates, making it clear which cutting edges fit the clamp without guesswork. Installation is straightforward when using the matching shank or mounting adapter; routine checks of clamp torque and insert seating prevent movement during heavy cuts. Regular inspection and clean seating faces deliver long-term serviceability and consistent cutting behaviour, so maintenance intervals remain predictable. For tailored advice on Teknik Cutting Tools parting clamp holders, contact Metav Werkzeuge in Emmerich by e-mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 to request SKU D696TM and discuss suitability for specific machines and materials Technical data Article number: D696TM Manufacturer: Teknik Makina Eclass: 21181005 Facts Overall length: 125 mm Weight: 0.389 kg Clamping head height: 20 mm Clamping head width: 20 mm Cutting head width: 20 mm Cutting width: 5 mm Max plunge depth: 22 mm Cutting direction: right Special features Compatible with Horn inserts ISO 2020 insert size Shank/mounting designation: 5C-R S229 SKU: D696TM Brand: Teknik Makina FAQ Which insert size fits this holder? The holder accepts inserts in the ISO 2020 size; Horn-compatible plates are recommended for optimal seating and geometry with this parting clamp holder. Is the cutting direction fixed or reversible? This parting clamp holder is configured for right-hand cutting and is intended for right-hand parting and grooving operations. What is the maximum plunge depth for heavy sectioning? Maximum plunge depth is 22 mm, allowing substantial infeed for typical parting tasks within that limit. Which shank or mounting designation is required? The holder references the 5C-R S229 mounting designation for its bar or shank interface; confirm turret or toolpost compatibility with that code. Can this holder be used for grooving aluminium and steel? Yes, the holder’s stable 20 x 20 mm clamping head and 5 mm cutting width make it suitable for grooving and parting common workshop steels and aluminium when paired with the correct insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Mini Toolholder 5mm Shank M6 Thread 88mm Length - Teknik Makina
Take advantage of the combination of compact design, secure M6 locking and precise clamping for reliable parting and grooving operations; order the Mini parting tool clamping holder via Metav Werkzeuge or contact our consultants for application advice. Mini parting tool clamping holder – compact 20 mm body, 5 mm shank (Teknik Makina) A compact Mini parting tool clamping holder designed for space-restricted turning and grooving tasks, offering secure tool retention and easy integration into small toolposts. Compact 20 mm body for tight setups 5 mm shank for small-diameter toolholders Threaded M6 locking for secure clamping 88 mm overall length for space-saving use Improved process reliability through precise clamping The holder provides precise and repeatable clamping that reduces tool movement during parting and grooving cycles. Its compact 20 mm body and low weight contribute to lower overhang and reduced vibration, which in turn improves surface finish and extends insert life. The combination of a 5 mm shank and M6 thread for the locking screw ensures a firm mechanical connection; the result is stable cutting conditions and fewer cycle interruptions in high-mix, small-part production. Engineered for compact lathes and demanding setups Designed with confined setups in mind, the parting tool holder fits into crowded toolposts while keeping the cutting edge close to the workpiece, enabling safer and more efficient machining of small components. The 88 mm overall length helps maintain a short tooling envelope without sacrificing accessibility. Where space and repeatability matter, the compact design supports faster set-ups and reduced tool-change downtime, delivering a tangible productivity benefit on short-run and precision turning tasks. Simple compatibility and maintenance for workshop efficiency The clamping concept is intentionally straightforward to make routine checks and replacements quick. The holder’s standard M6 locking thread and common 5 mm shank diameter match widely used small tooling standards, easing retrofit into existing tool assemblies. Lightweight construction and robust geometry make maintenance uncomplicated; periodic inspection of the locking screw and clamping face is normally sufficient to keep repeatability high, so workshop throughput remains consistent without complex upkeep. For tailored advice or to secure reliable precision tooling from Teknik Makina, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitment and delivery options Technical data Article number: DC326TM Manufacturer: Teknik Makina Facts Body diameter: 20 mm Shank diameter: 5 mm Thread: M6 Overall length: 88 mm Weight: 0.221 kg Special features Compact design for restricted toolposts Threaded locking screw for secure clamping Low weight for reduced overhang Designed for parting and grooving tool use FAQ What shank diameter does the holder accept? The holder accepts a 5 mm shank; the Mini parting tool clamping holder is specified with a 5 mm shank diameter for small tooling applications (SKU DC326TM, Teknik Makina). Is the clamping screw a standard size? Yes, the locking screw uses an M6 thread, providing standardised replacement and straightforward sourcing for maintenance. Can this holder be used on compact CNC lathes? The compact 20 mm body and 88 mm overall length make the holder suitable for compact lathes where a short tooling envelope and stable parting are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Mini-Clamping Holder 88mm Overall Length M6 Thread, 3mm Shank - Teknik Makina
Take advantage of a compact, high‑precision clamping solution that combines secure fixing with a small footprint for tight turning operations; order directly via Metav Werkzeuge or consult the technical team for integration advice. Mini parting clamp holder (DC306TM) – Ø20 mm body, M6 clamping screw | Teknik Cutting Tools The Mini parting clamp holder is a compact parting tool clamp engineered for small turning setups where secure clamping and minimal interference are essential Mini parting clamp holder, Ø20 mm body Clamping thread M6 for secure fixing 3 mm tool shank bore for small inserts Overall length 88 mm, lightweight 0.228 kg Secure clamping for precise parting operations The compact clamp provides precision clamping through its standard M6 fastening and a defined 3 mm bore, enabling reliable fixation of small parting blades or tool shanks. The Ø20 mm body concentrates clamping force close to the cutting edge, which reduces micro‑movement and helps to maintain repeatable cut geometry. For workshop managers and operators focused on stable performance, this minimises rework and supports consistent cycle times while preserving tool life. Space‑saving design for tight setups and easier handling With an overall length of 88 mm and a mass of just 0.228 kg, the holder is purposefully compact to fit close to the workpiece where larger fixtures would obstruct access. The reduced profile simplifies tool clearance and enables denser tool‑post configurations on small lathes and CNC turning centres. Lightweight construction reduces inertia during rapid tool changes and contributes to ergonomic handling during setup and maintenance, making the component suitable for shops seeking efficient use of turret real estate. Simple integration and dependable workshop performance The parting clamp adopts standardised interfaces—visible in the M6 clamping thread and defined diameters—so integration with existing fixtures is straightforward and predictable. The unit’s compact geometry supports short overhangs, which helps to reduce vibration in finish passes. Supplied as article number DC306TM by Teknik Cutting Tools, the design focuses on repeatability and low‑complexity installation, aiding production planning and fast tool replacement. Metav’s distribution ensures a quality filter and reliable supply from Emmerich for European workshops seeking consistent tooling availability. For compact, reliable parting clamping from Teknik Cutting Tools, contact Metav Werkzeuge for product availability and technical guidance at their Emmerich site Technical data Article number: DC306TM Manufacturer: Teknik Cutting Tools Dimensions & weight Diameter: 20 mm Overall length: 88 mm Shank bore: 3 mm Thread: M6 Weight: 0.228 kg Features & design Miniature parting clamp design Lightweight construction Compact footprint for tight setups FAQ What is the body diameter of the clamp holder? The Mini parting clamp holder features a body diameter of 20 mm (Ø20 mm). Which thread is used for the clamping screw? Clamping is secured via an M6 thread to ensure standardised fixing. What shank size does the holder accept? The holder is specified with a 3 mm bore for small tool shanks or insert holders. What is the overall length and weight of the unit? Overall length is 88 mm and the unit weighs 0.228 kg. Which article number should be referenced when ordering? Order reference is DC306TM, listed under Teknik Cutting Tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, reliable parting and grooving for precision turning
Parting and grooving tools, also referred to as parting blades, grooving tools or cut-off tools, are narrow carrier tools for lathes fitted with replaceable carbide inserts. Supplied as solid holders or flat blades, they are designed to cut precise grooves and to part finished components cleanly from the material bar.
Why internal coolant matters for deep cuts and tough materials
When used in simple form without internal coolant, the cutting fluid is applied via external machine nozzles; this is often sufficient for very shallow grooves and easily machinable materials. For deeper grooving and parting operations, however, the tool nearly encloses the slot so that external coolant cannot reach the cutting edge. Tools with internal coolant incorporate fine, integrated channels that deliver coolant under high pressure directly to the insert and beneath the chip. This targeted supply controls the intense heat in the confined cutting zone and uses flushing pressure to eject chips reliably, preventing chip jamming, surface damage and sudden tool breakage.
Clear operational benefits you can measure
- faster cycle times through reliable chip evacuation and uninterrupted cutting
- extended tool life thanks to effective heat control at the cutting edge
- consistent surface finish by avoiding chip re-cutting and scarring
- safer machining of hard or ductile materials due to reduced risk of tool fracture
- simplified setup when holders with integrated channels replace complex external coolant rigs
Metav as a practical partner for your workshop
Metav stands for democratisation of precision: decades of expertise, a quality filter in Emmerich and an assortment that supports industry and trade. With more than 48,000 customers and a catalogue of over 250,000 products, Metav provides a focused selection of parting and grooving tools, accessories and matched holders so that procurement and technical choice remain straightforward and dependable.
Parting and grooving tools bring reliable groove geometry and safe parting to turning operations; choosing holders with integrated coolant channels is essential for deep cuts and demanding materials. If technical advice is needed, Metav’s product specialists can help select the appropriate tool geometry and coolant configuration for the application.
FAQ
When is internal coolant necessary for parting tools?
Internal coolant becomes necessary for deep grooving and parting or when machining hard or ductile materials; it delivers coolant directly to the insert and beneath the chip, which is critical when external nozzles can no longer reach the cutting edge.
Can parting tools be used without internal coolant?
Yes — for very shallow cuts and easily machinable materials, parting tools can be used with external machine coolant nozzles, but performance and tool life will drop markedly for deeper cuts.
How do parting tools prevent dangerous chip jamming?
Parting tools with integrated channels use high-pressure coolant to flush chips out of the narrow slot, preventing chips from becoming trapped and minimising the risk of surface damage and abrupt tool failure.
What should be considered when choosing a grooving insert and holder?
Select a combination that matches the required groove depth and material grade; holders offering integrated high-pressure channels are preferred for deep cuts or poor-chip-breaking materials to ensure heat control and reliable chip evacuation.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com