Precision cut-off tools for accurate grooving and part-off operations
Cut-off tools are narrow holder systems for lathes designed to produce precise grooves and part-offs, offering reliable control when machining steels and other workpiece materials where clean separation is essential. They serve as either solid clamp-style holders or flat tool blades fitted with indexable carbide inserts, and when equipped with internal coolant channels they deliver high-pressure coolant directly to the insert to control heat and evacuate chips efficiently. Using these tools reduces the risk of chip jamming, surface damage and sudden tool failure while improving repeatability, particularly in deep grooving and tough materials where external coolant is insufficient. Key advantages include enhanced cutting stability, extended insert life and consistent part quality through optimised chip evacuation and thermal management.
150mm Stechklemmhalter 5mm Cut Width, 25mm Max Insert Depth, 25x25mm ISO 2525, For 5C MGM Inserts, Left-Hand Cutting, 5C-L MGM - Teknik Makina
The combination of a 5 mm cutting width and a 25 × 25 mm shank delivers precise, stable parting and grooving performance; the left‑hand orientation and 150 mm overall length support reliable set‑ups. Order the D620TM parting clamp holder directly via Metav Werkzeuge or ask our consultants if needed. D620TM Parting clamp holder — left‑hand, 5 mm cutting width (Teknik Makina) A parting clamp holder engineered for left‑hand parting and grooving operations in turning applications, compatible with Korloy 5C MGM inserts. Left‑hand cutting orientation 5 mm cutting width for precise parting 25 × 25 mm shank for stable clamping 150 mm overall length, 0.703 kg weight Precision and productivity in every cut This clamp‑style holder is designed for accurate parting and grooving where repeatable results are required. The 5 mm cutting width ensures narrow, controlled material separation while the left‑hand geometry suits operations where the cutting feed is directed accordingly. The holder’s ISO 2525 designation identifies its standardised interface, simplifying tool selection and integration into CNC and manual lathes. By translating cutter geometry into consistent chip control, the device reduces rework and contributes to a more efficient production cycle. Rigidity and set‑up stability for consistent turning A robust 25 × 25 mm shank provides a secure clamping surface that minimises deflection during heavy cuts or interrupted cuts. With a 150 mm overall length paired with a mass of 0.703 kg, the holder balances reach and stiffness for compact tool posts and longer overhangs. The clamping concept maintains positive insert siting and decreases vibration, which in turn protects insert life and improves surface finish on the workpiece. These mechanical attributes translate directly into fewer tool changes and steadier cycle times. Compatibility and integration with insert systems The holder accepts the 5C MGM indexable insert family and is specified for use with Korloy inserts, enabling straightforward replacement and rapid set‑up in production environments. The indicated bar interface 5C‑L MGM refers to the corresponding boring bar or mounting sleeve standard for this holder type, facilitating interchangeability in modular tooling systems. For workshops standardising on Korloy inserts, the holder integrates seamlessly into existing assortments and tool carriers, reducing procurement complexity and inventory variety. Application scope and operational benefits Engineered for parting‑off and narrow grooving, the clamp holder supports a maximum parting depth of 25 mm, permitting the machining of medium‑section components and routine grooving tasks. The clamping design secures the insert during transverse loading and helps maintain dimensional tolerances over repeated cycles. As a practical choice for fabricators and subcontractors, the toolholder brings consistent performance to batch production and repair work, improving first‑pass yield and supporting predictable lead times. For robust left‑hand parting operations, request Teknik Makina’s D620TM from Metav Werkzeuge — contact our technical advisors at info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and procurement support. Technical data Article number: D620TM Manufacturer: Teknik Makina Facts Shank height: 25 mm Shank width: 25 mm Cutting width: 5 mm Maximum parting depth: 25 mm Overall length: 150 mm Weight: 0.703 kg Cutting direction: left Special features Compatible with Korloy inserts For 5C MGM insert family ISO 2525 designation Interface: 5C‑L MGM FAQ What insert type fits this holder? The D620TM holder is designed for the 5C MGM insert family and is specified for use with Korloy inserts. Is the cutting orientation right‑hand or left‑hand? The holder is supplied in a left‑hand configuration, suitable for left‑hand parting and grooving applications. What is the maximum parting depth? The tool supports a maximum parting depth of 25 mm, suitable for medium‑section work. Which shank dimensions ensure stability in the tool post? A 25 × 25 mm shank provides a rigid clamping surface to reduce deflection and vibration. What is the overall length and how does it affect set‑up? The holder measures 150 mm overall, balancing reach with stiffness for typical lathe set‑ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Stechklemmhalter 5mm Cutting Width, 18mm Max Cut Depth, 25mm Shank Width, 25mm Head Width, 25mm Holder Height, 0.73kg, 2525, 5C-R S224, For Horn Inserts, Right-Hand Cutting - Teknik Makina
Take advantage of the combination of reliable clamping, compact dimensions and precise plunge control to keep parting and grooving operations consistent. The robust right‑hand design with a 5 mm cutting width and 18 mm maximum plunge depth supports predictable chip control and repeatable set‑ups — order the parting tool holder directly via Metav Werkzeuge or consult our specialists for compatibility advice. Parting tool holder D710TM — right‑hand, 25 mm clamping height, 150 mm length (Teknik Makina) Parting tool holder D710TM is a right‑hand, indexable holder designed for accurate grooving and parting on conventional and CNC lathes, suited to installers using standard Horn indexable inserts. Right‑hand cutting action 25 mm clamping and head width 5 mm cutting width for narrow grooves 150 mm overall length and sturdy mass Achieve precise parting with compact, predictable geometry The D710TM is engineered around a compact 25 mm clamping height and matching head width, which minimises overhang and supports stable cutting forces. A controlled 5 mm cutting width combined with an 18 mm maximum plunge depth allows precise removal during grooving and parting operations, reducing rework and secure set‑ups. By limiting unsupported length and offering a weighed mass of 0.73 kg, the holder reduces vibration and contributes to improved surface finish and longer tool life. The design therefore enhances process reliability and repeatability in production environments where consistent cycle times matter. Fits established insert systems for fast changeovers Compatibility with standard indexable systems simplifies tooling logistics: the holder accepts Horn indexable inserts and is specified to ISO 2525, with a clamping shank reference 5C‑R S224 for quick integration. This alignment with industry norms enables swift insert replacement and predictable seating, cutting setup time and increasing machine uptime. Clear interface standards also make the holder suitable for workshops that standardise tooling across multiple machines, supporting efficient spare‑part management and faster operator training. Easy integration into turning and CNC workflows Designed for right‑hand cutting, the holder mounts in conventional toolposts and turret systems without additional adapters, while the 150 mm overall length maintains a compact footprint in the toolpost. The plain, industry‑orientated geometry allows straightforward indexing and secure clamping, so set‑ups are repeatable under production pressures. For CNC applications, the holder’s dimensions and balanced mass support higher feed stability and predictable chip formation, helping to protect both workpiece tolerances and indexable insert life. Practical benefits for workshop efficiency and quality assurance Beyond dimensional accuracy, the D710TM places emphasis on pragmatic workshop advantages: faster setup, reduced vibration and fewer rejected parts. The right‑hand configuration and standard interface shorten lead times for tool changes and inventory planning. When combined with Metav’s sourcing and technical guidance, the assembly forms a dependable part of the production chain, delivering measurable gains in throughput and process stability without complex retrofits. For tailored advice on integrating the D710TM into an existing tooling system or to confirm insert compatibility, contact Metav Werkzeuge for professional guidance and reliable supply. Technical Data Article number: D710TM Manufacturer: Teknik Makina Designation: Stechklemmhalter ISO designation: 2525 Compatible inserts: Horn Facts Overall length: 150 mm Clamping/holder height: 25 mm Head width: 25 mm Cutting width: 5 mm Maximum plunge depth: 18 mm Weight: 0.73 kg Cutting direction: right Special features Compatible with Horn indexable inserts Clamping shank reference: 5C‑R S224 Right‑hand parting action Compact design for reduced overhang FAQ What cutting direction does the holder use? The parting tool holder D710TM is configured for right‑hand cutting, suitable for standard right‑hand parting and grooving operations. Which inserts fit the D710TM? The holder is compatible with Horn indexable inserts and adheres to ISO 2525 interfaces; check the Horn insert catalogue for matching grades and shapes. What are the key dimensions to consider for set‑up? Essential dimensions are a clamping height and head width of 25 mm, an overall length of 150 mm and a cutting width of 5 mm; these help determine toolpost fit and overhang. Can the D710TM be used on CNC lathes as well as conventional machines? Yes — the compact 150 mm length and sturdy mass make the holder suitable for both CNC and conventional lathe toolposts, offering stable performance in automated turning cycles. How does the D710TM improve process reliability? By combining reduced overhang, a secure clamping interface and a defined plunge depth of 18 mm, the holder reduces vibration and enhances repeatability, contributing to fewer rejects and longer insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Stechklemmhalter 5° 2525 5C-L (50-80) For MGM 5 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Combining secure clamping with a compact, left-hand cutting geometry, this toolholder delivers stable parting and grooving performance for medium-duty turning. Featuring a 25 mm head width and a 5 mm blade, it supports Korloy indexable inserts and fits 5C-L shanks — order via Metav Werkzeuge or contact the consultants for application advice. Parting clamp holder D812TM — left-hand parting & grooving toolholder by Teknik Makina, 25 mm head The Parting Clamp Holder D812TM is designed for reliable parting and grooving operations on lathes and turning centres, accepting standard indexable inserts and 5C-L shank bores Left-hand cutting direction 25 mm head width for robust support Compatible with Korloy MGM 5 inserts ISO 2525 shank designation Stable clamping that reduces chatter and rework The D812TM acts as a parting clamp holder engineered to keep the cutting edge rigid under load. Thanks to a 25 mm head width and a compact but stiff design, the holder minimises vibration during cut-off operations, which reduces the risk of workpiece distortion and tool wear. The left-hand cutting geometry is integrated to match lathe setups that require right-hand facing from the operator’s perspective, providing consistent engagement and safer chip flow when used with suitable inserts. Clear compatibility for fast setup and proven inserts Designed to accept Korloy indexable inserts (type MGM 5) and to mount in standard 5C-L bores, the holder simplifies toolroom logistics and changeovers. The ISO 2525 designation ensures interchangeability with matching shank systems, while the shank diameter of 50 mm and the overall length of 150 mm deliver predictable positioning in the toolpost. This compatibility reduces setup time and supports repeatable datum positioning, which is especially valuable for batch production and frequent tool swaps. Performance data explained for practical benefits Key dimensions such as a 5 mm blade width and a maximum cutting diameter of 80 mm define the working envelope and the intended use: precise parting and narrow-grooving tasks rather than heavy shoulder turning. The design includes a maximum stech depth of 20 mm for the insert sword, enabling controlled penetration without overstressing the insert. At a weight of 0.721 kg, the holder balances mass for damping with manageable handling during installation, helping to maintain cycle times while protecting insert life. Workflow improvements and maintenance advantages Using this holder with correctly specified inserts and feeds leads to fewer interrupted cycles and lower tool consumption, improving overall process efficiency. The clamping concept permits quick insert replacement and secure fixation, which reduces downtime during shifts. For workshops aiming to streamline tooling, the combination of standard shank interfaces, robust head geometry and left-hand orientation supports consistent results across multiple machines and operators. For application-specific recommendations and stock availability of the Teknik Makina D812TM parting clamp holder, contact Metav Werkzeuge for personalised advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: D812TM Manufacturer: Teknik Makina Data Weight: 0.721 kg Overall length: 150 mm Shank diameter: 50 mm Max cutting diameter: 80 mm Head width: 25 mm Cutting blade width: 5 mm Maximum parting depth: 20 mm Cutting direction: left Special features Compatible with Korloy inserts (MGM 5) ISO designation: 2525 Boreshank compatibility: 5C-L (50-80) Shank cutting length: 25 mm Robust compact design for reduced vibration FAQ What insert types fit this holder? The D812TM parting clamp holder accepts Korloy indexable inserts, specifically the MGM 5 type, providing a standardised solution for grooving and parting tasks. Is this holder suitable for my 50 mm shank toolpost? Yes, the holder is specified with a 50 mm shank diameter and mounts in compatible 5C-L bores, matching common toolpost interfaces. What is the maximum cutting diameter that can be handled? The D812TM supports a maximum cutting diameter of 80 mm, making it suitable for medium-diameter parting and narrow grooving operations. Does the holder require a right-hand or left-hand configuration? This model features a left-hand cutting direction, intended for setups that require left-oriented cutting geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Stechklemmhalter 5° 2525 5C-L (80-110) For MGM 5 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a left-hand parting and grooving solution that combines secure clamping, broad insert compatibility and compact dimensions for predictable cycle times — ideal for batch turning and precise cut-off operations. Benefit from the holder’s compatibility with Korloy MGM 5 inserts and a maximum cutting diameter of 110 mm. Order directly via Metav Werkzeuge or consult our specialists for application guidance and rapid delivery. Parting and Grooving Clamp Holder D816TM — Left-hand parting and grooving toolholder, Korloy MGM 5 compatible (Teknik Makina) A robust parting and grooving clamp holder, D816TM, designed for left-hand turning operations and engineered to accept Korloy MGM 5 inserts for controlled parting cuts in production and workshop environments. Left-hand cutting orientation Compatible with Korloy MGM 5 inserts Max cutting diameter 110 mm Compact 25 mm clamp head Reliable clamping for consistent parting accuracy The clamp head is engineered to give a secure hold on the insert while maintaining repeatable cutting geometry. With a head width of 25 mm and an insert support geometry that accommodates the specified insert form, the holder reduces insert movement under load and therefore stabilises cut-off operations. This structural reliability converts directly into flatter learning curves at set-up, fewer scrap parts and reduced rework — a measurable production advantage for repetitive turning tasks. Built for industrial compatibility and flexible tooling Designed to accept Korloy MGM 5 inserts, the holder allows standardisation across toolrooms that already employ Korloy grades. The tool supports a maximum cutting diameter of 110 mm and a cutting-edge width of 5 mm, enabling common parting and grooving profiles without the need for bespoke tooling. Standard clamping and the ISO designation 2525 on the mounting interface simplify integration with existing turret and toolpost systems, lowering changeover time and increasing machine uptime. Practical benefits in handling and set-up At an overall length of 150 mm and a mass of 0.716 kg, the unit balances compactness with sufficient rigidity for stable cuts. The parting depth capability of 20 mm supports moderate cross-section separations while the shank diameter of 80 mm ensures a secure mounting in compatible toolholders or bar-style bores. Quick, positive clamping of the insert reduces set-up complexity; the holder’s straightforward geometry makes insert changes and visual inspections faster, contributing to shorter maintenance windows. Durability, performance and workshop efficiency Materials and hardening specifications are chosen to provide durability under normal turning loads; the clamping design resists loosening and supports a consistent cutting edge position. These features help to extend insert life and offer predictable cycle times, improving overall equipment effectiveness. For operations requiring a left-hand tool, this holder provides a practical blend of rigid support and accessible maintenance, making it suitable for small-batch production as well as recurring series work. For dependable left-hand parting results, contact Metav Werkzeuge GmbH to verify fitment and order the D816TM directly from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised technical advice and availability. Technical Data Article number: D816TM Manufacturer: Teknik Makina SKU: D816TM Compatible inserts: MGM 5 (Korloy) Cutting direction: left Facts Max cutting diameter: 110 mm Shank diameter: 80 mm Overall length: 150 mm Clamp head width: 25 mm Cutting width (insert): 5 mm Maximum parting depth: 20 mm Weight: 0.716 kg ISO designation: 2525 Special features Suitable for Korloy MGM 5 inserts Shank adaptor: 5C-L (80-110) Left-hand parting and grooving configuration Designed for secure insert clamping and repeatable geometry FAQ What insert types are compatible with the holder? The holder accepts Korloy MGM 5 inserts; the clamping geometry is matched to that insert family for secure seating and stable parting performance. Is the tool suitable for left-hand turning only? Yes. The unit is configured for left-hand cutting orientation and is intended for left-hand parting and grooving operations. What is the maximum cutting diameter supported by the holder? The clamp holder supports a maximum cutting diameter of 110 mm, enabling a variety of parting and grooving tasks within that envelope. How deep can the tool cut in a single pass? The maximum parting depth is 20 mm, suitable for common cut-off depths in workshop and light production settings. What mounting options are available for the shank? The tool is supplied with the shank diameter of 80 mm and is compatible with the specified 5C-L (80-110) bore adaptation for secure mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Stechklemmhalter 5° 2525 5C-R (80-110) For MGM 5 Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, rigid holder that combines precise clamping with broad insert compatibility to keep parting and grooving processes efficient and repeatable; order directly via Metav Werkzeuge or consult our specialists for application advice. Parting Tool Holder D796TM — right-hand holder with 5 mm blade width by Teknik Makina A right-hand Parting Tool Holder D796TM designed for accurate parting and narrow-groove work on lathes, compatible with Korloy MGM 5 indexable inserts and ISO 2525 shank format Right-hand cutting direction 5 mm blade width for narrow parting Compatible with Korloy MGM 5 inserts Max cutting diameter 110 mm Precision clamping for consistent parting results The holder is engineered for repeatable parting operations thanks to a stable clamping interface and a 25 x 25 mm shank that fits standard toolposts. With a cutting height of 45 mm, the design offers correct insert alignment to minimise deflection and rework. A secure clamping mechanism preserves insert position during high-force cuts, which translates into predictable cycle times and reduced scrap rates — a direct efficiency gain for series production or workshop jobs where consistency is critical. Broad compatibility that speeds up setup Compatibility with Korloy MGM 5 inserts and the ISO designation 2525 reduces tooling variants and changeover time. The holder accepts the specified 5C-R (80-110) bar interface and supports operations up to a max Ø 110 mm, enabling use across a wide range of diameters without additional adapters. For buyers unfamiliar with indexable terminology: the insert type denotes the insert geometry and size family, which determines the cutting edge available and the ease of replacement. This compatibility minimises procurement complexity and shortens machine downtime. Robust geometry for productivity and tool life A 5 mm blade width and a maximum parting depth of 20 mm provide a balance between narrow kerf efficiency and structural rigidity. The overall length of 150 mm and a compact mass of 0.716 kg make the holder easy to position while maintaining damping against chatter in interrupted cuts. The combination of compact dimensions and focused cutting geometry supports longer insert life and fewer regrinds, yielding lower operating costs per component. Where surface finish matters, the stable set-up helps maintain consistent edge engagement and better part quality. Choose Teknik Cutting Tools' D796TM holder for dependable, productive parting applications — contact Metav Werkzeuge for tailored technical advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D796TM Manufacturer: Teknik Makina Product: Parting tool holder Numbers / Core technical data Shank head width: 25 mm Cutting height: 45 mm Blade width: 5 mm Max cutting diameter: 110 mm Maximum parting depth: 20 mm Overall length: 150 mm Weight: 0.716 kg Suitable diameter (guideline): 80 mm Designs / Special features Compatible inserts: MGM 5 Compatible insert manufacturer: Korloy ISO designation: 2525 Bar/holder interface: 5C-R (80-110) Cutting direction: right Cutting head width: 25 mm Randel (knurling) tool height reference: 25 mm FAQ What insert type fits this holder? The holder accepts MGM 5 indexable inserts and is specified for Korloy insert geometries; this ensures quick insert changes and standardised edge forms. Is the holder suitable for heavy-duty parting on large diameters? Designed for operations up to a max Ø 110 mm, the holder offers a robust shank and clamping to handle many parting tasks; for very heavy-duty cuts, assess machine rigidity and recommended cutting parameters. How does the right-hand orientation affect use? Right-hand cutting means the insert cuts when moving from left to right relative to the spindle; the orientation should match the machine setup and component geometry to ensure correct chip flow and tool engagement. Can the holder be used for grooving as well as parting? Yes — with a 5 mm blade width and controlled parting depth, the design supports narrow grooving operations where a slim kerf and high accuracy are required. What are the physical dimensions that affect mounting? Key dimensions are the 25 x 25 mm shank interface, an overall length of 150 mm, and a cutting height of 45 mm, which determine compatibility with standard toolposts and fixture clearances. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Turning Clamp Holder 2525, For MGM 3 Inserts, Internal Cooling, Left-Hand Cutting, 3C-L (80-110) - Teknik Makina
Take advantage of a sturdy left‑hand parting solution with a 25 mm clamping head and a 3 mm cutting width that delivers dependable separation on diameters up to 110 mm; order directly via Metav Werkzeuge or consult our specialists for integration advice. Stechklemmhalter (parting toolholder) D804TM – left‑hand, 25 mm head, 3 mm blade Stechklemmhalter (parting toolholder) D804TM is designed for precise left‑hand parting and grooving applications on lathes, compatible with Korloy inserts for fast changeovers and reliable clamping. Left‑hand cutting orientation 25 mm clamping head width Compatible with Korloy MGM 3 inserts Max cutting diameter 110 mm Precise clamping for consistent parting results The D804TM toolholder offers a stable clamping head of 25 mm, engineered to keep the insert firmly located during cut‑off operations. The combination of a 3 mm cutting width and a maximum cutting depth of 17 mm makes the holder well suited to controlled parting on workpiece diameters up to 110 mm, reducing chatter and rework. By specifying a defined shank and head geometry, the design supports reproducible set‑ups and shorter cycle times, which is critical for tight production schedules. Smooth integration and fast insert replacement Compatibility with Korloy MGM 3 indexable inserts and the ISO designation 2525 simplifies procurement and tool management, enabling straightforward insert swaps without complex adjustments. The holder’s shank designation 3C‑L (80‑110) and overall length of 150 mm allow straightforward mounting in standard toolposts, while the defined shank cutting length and blade geometry reduce alignment effort. This compatibility lowers setup time and helps maintain process stability across batches. Durable construction for repetitive turning tasks Weighing 0.72 kg and with a cutting height of 40 mm, the unit balances rigidity and manoeuvrability for repetitive grooving and parting cycles. The toolholder’s robust profile minimises flex under load, which maintains surface integrity on separated parts and extends insert life. For workshops aiming to maximise uptime, the holder’s compact yet sturdy build supports frequent changeovers and predictable tool behaviour during continuous operation. Why this holder makes sense in a production environment Specifying a dedicated left‑hand parting holder reduces the risk of incorrect orientation and tool interference during twin‑spindle or multi‑station turning. The clearly defined mechanical parameters — blade width, cutting depth and compatible insert family — provide an objective basis for process planning and purchasing decisions. Where throughput and repeatability matter, this holder helps create a reliable, measurable cutting process rather than an ad‑hoc solution. Choose Teknik Makina’s left‑hand parting option for robust, repeatable separation tasks — order the D804TM via Metav Werkzeuge or contact our consultants at Metav Werkzeuge for technical matching and delivery from Emmerich. Technical data Article number: D804TM Manufacturer: Teknik Makina Designation: Stechklemmhalter Core specifications Max cutting diameter: 110 mm Cutting width: 3 mm Cutting height: 40 mm Max cutting depth: 17 mm Clamping head width: 25 mm Shank cutting length: 25 mm Overall length: 150 mm Diameter: 80 mm Weight: 0.72 kg Features / compatibility Left‑hand cutting orientation Compatible with Korloy inserts Insert type: MGM 3 ISO designation: 2525 Shank designation: 3C‑L (80‑110) FAQ What insert type fits this holder? The holder accepts Korloy indexable inserts of the MGM 3 type; the D804TM is specified for this insert family and ISO designation 2525. What is the maximum cutting diameter for the toolholder? Maximum cutting diameter is 110 mm when mounted with the specified shank and insert configuration for the D804TM. How deep can the cut be with this parting holder? The maximum parting depth is 17 mm for the D804TM in normal operation with recommended inserts. Is the holder left‑hand or right‑hand orientation? This toolholder is manufactured for left‑hand cutting orientation and is intended for operations that require left‑hand parting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Turning Clamp Holder for MGM 300 Indexable Inserts 3mm Cutting Width, 17mm Cutting Depth, M6x20 Clamp Screw - Teknik Makina
Take advantage of the combination of robust clamping, standardised compatibility and extended reach to maintain a steady production flow with fewer tool changes; order this parting clamp holder directly via Metav Werkzeuge or consult the team for application advice. Parting clamp holder MGM 300 L150mm by Teknik Makina — 150 mm length, right-hand cutting The Parting clamp holder MGM 300 L150mm secures MGM 300 indexable inserts for high‑precision parting and grooving on lathes, designed for right‑hand cutting applications. Secure clamp for MGM 300 indexable inserts Length 150 mm for extended reach Toolholder width 25 mm, head width 42.5 mm Right-hand cutting, max cutting diameter 200 mm Consistent parting accuracy through rigid clamping The holder is engineered for repeatable results when working with MGM 300 indexable inserts. The combination of a 150 mm shank and a 25 mm toolholder width gives a rigid foundation that minimises vibration during parting, which in turn reduces the risk of burrs and rework. The 42.5 mm cutting‑head width offers lateral stability at the insert seat, while the specified cutting height 0.754 mm ensures the insert aligns with common turning tool heights. These measurable design choices translate directly into fewer rejects and a steadier machining process. Faster changeovers and safer clamping for productive workshops Assembly and insert replacement are simplified by the standard M6x20 clamp screw and the supplied 5 Allen tightening interface, allowing for controlled, repeatable torque with common workshop tools. The holder supports a max cutting diameter 200 mm, which enables operations on larger diameters without swapping to a different setup. This focus on serviceability and robustness reduces machine downtime and increases throughput, providing a pragmatic return on tooling decisions and greater confidence in daily production. Broad compatibility and easy maintenance for mixed operations Compatibility with Korloy MGM 300 indexable inserts and the ISO 2525 designation means straightforward integration into existing tooling stocks and turret setups. The holder’s right-hand cutting orientation is clearly defined for process planning; the 3 mm cutting‑edge width and a maximum parting depth of 17 mm make the component suitable for a wide range of parting and grooving tasks. Routine maintenance requires only common hex tools, keeping lifecycle costs low and ensuring the clamp remains serviceable on the shop floor. The build reflects Teknik Makina’s focus on functional, workshop-ready tooling. For tailored advice on fitting this Teknik Makina parting clamp holder to specific machines or components, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss compatibility, delivery and technical matching. Technical data SKU: D825TM Label: Stechklemmhalter MGM 300 L150mm Manufacturer: Teknik Makina ECLASS: 21181005 Facts Overall length: 150 mm Holder width: 25 mm Holder height: 25 mm Cutting‑head width: 42.5 mm Max cutting diameter: 200 mm Cutting height: 0.754 mm Max parting depth: 17 mm Cutting width: 3 mm Screw: M6x20 Allen key size: 5 Special features Compatible with MGM 300 indexable inserts Suitable for Korloy inserts Right‑hand cutting direction ISO 2525 toolholder designation Product type: parting clamp holder Labelled: MGM 300 L150mm FAQ What inserts fit this holder? The holder accepts MGM 300 indexable inserts; it is compatible with inserts from Korloy and other manufacturers that match the MGM 300 geometry. Is this holder suitable for heavy‑duty parting? The combination of a 25 mm shank, 42.5 mm head width and a 150 mm length delivers the rigidity required for many heavy‑duty parting tasks within the specified max cutting diameter 200 mm. Which tools are needed for clamp operation and maintenance? Maintenance and insert changes use a standard 5 Allen hex key and the M6x20 clamp screw, offering straightforward, reproducible fastening. Can the holder be used for left‑hand cutting? This design is specified for right‑hand cutting; for left‑hand operations, a dedicated left‑hand holder should be selected. What is the ISO designation and why does it matter? The ISO 2525 designation indicates a standardised holder form factor, which simplifies turret programming and ensures predictable mounting across compatible machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Turning Grooving Holder 4mm Cut Width, 18mm Max Depth, 25x25mm ISO 2525, For 4C MGM Inserts, Left-Hand Cutting, Innenkühlung - Teknik Makina
Take advantage of robust left‑hand parting performance combined with compact clamping dimensions for reliable, repeatable cut‑off operations. The holder’s 4 mm cutting width and 18 mm maximum plunge depth deliver precise groove control while the 25 x 25 mm clamping block ensures a stable set‑up; order directly via Metav Werkzeuge or request technical advice from our consultants. Parting tool holder D618TM — left‑hand, 4 mm cutting width by Teknik Makina A compact parting tool holder D618TM engineered for left‑hand grooving and parting operations on turning centres, offering a sturdy 25 x 25 mm clamping block and compatibility with Korloy 4C MGM indexable inserts. *Left‑hand cutting direction *4 mm cutting width for narrow grooves *Compatible with Korloy 4C MGM inserts *25 x 25 mm clamping block dimensions Consistent left‑hand parting that improves process reliability The left‑hand orientation supports machining strategies where chip flow and tool approach demand a counter‑direction setup; left‑hand cutting reduces interference on specific turning programmes and helps to maintain surface integrity during parting. The holder’s geometry is optimised for controlled cut‑off and groove creation, reducing unexpected deflection and enabling steady metal removal. This translates into fewer rejected parts and a more predictable production rhythm. Compact clamping dimensions for repeatable set‑ups With a clamping block of 25 x 25 mm and an overall length of 150 mm, the unit is designed for quick, repeatable mounting in standard tool posts. The modest mass of 0.727 kg contributes to a balanced assembly that resists vibration without imposing excessive load on the turret drive. A compact footprint speeds changeovers and simplifies fixture planning, supporting higher machine uptime and lower set‑up complexity for batch and single‑piece production alike. Clear insert compatibility and practical machining limits The holder accepts Korloy 4C MGM inserts (designation 4C MGM) and mates with shank types such as 4C‑L MGM, ensuring straightforward sourcing of cutting edges. The 4 mm cutting width is ideal for narrow groove and parting tasks, while the maximum plunge depth of 18 mm defines the safe working envelope for through‑cuts and partial grooving. Identified by ISO 2525, the clamping concept aligns with established standards for cutter seating and insert retention. Robust design that integrates with existing turning cells Manufactured to deliver stable insert clamping and repeatable positioning, the holder’s construction supports durable performance in workshop and production environments. The moderate overall length and standardised clamping face enable easy integration into CNC lathe tool turrets and quick‑change systems. Clear mechanical references and standard shank compatibility simplify toolroom logistics and reduce time spent on trial fits and adaptations. Contact Metav Werkzeuge for tailored advice on Teknik Cutting Tools holders and to confirm the D618TM fits the specific turning application; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D618TM Manufacturer: Teknik Makina SKU: D618TM Facts Overall length: 150 mm Clamping height x width: 25 x 25 mm Cutting width: 4 mm Maximum plunge depth: 18 mm Weight: 0.727 kg Special features Left‑hand cutting direction ISO designation: 2525 Compatible with Korloy 4C MGM inserts Shank/reference: 4C‑L MGM FAQ What cutting direction does the holder use? The holder is designed for left‑hand cutting, enabling left‑hand parting operations with controlled chip flow. Which inserts fit this holder? This holder accepts Korloy 4C MGM indexable inserts and is specified to work with shank type 4C‑L MGM. What is the maximum plunge depth for grooving? The maximum plunge (stech) depth is 18 mm, defining the safe working limit for parting and groove operations. What are the key dimensions for turret mounting? The clamping block measures 25 x 25 mm and the overall length is 150 mm, suitable for standard tool posts. Is this holder suitable for heavy interrupted cuts? The holder’s compact design and stable clamping favour controlled parting and narrow grooving; assessment for heavy interrupted cuts should consider machine power and specific insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Grooving Clamp Holder 2mm Cut Width, 16mm Max Grooving Depth, 1616 2C-L DGN For 2C DGN Inserts, Left-Hand, Internal Coolant - Teknik Makina
Take advantage of the 16 x 16 mm shank rigidity and compatibility with 2C DGN indexable inserts to achieve consistent narrow-width grooves with reduced vibration and longer insert life; order the tool directly via Metav Werkzeuge or consult their specialists for integration into production processes. D727TM Parting Tool Holder by Teknik Makina — 16 x 16 mm shank, left-hand D727TM Parting Tool Holder is a left-hand parting and grooving tool holder engineered for precision narrow-width cuts in turning operations, designed to accept 2C DGN indexable inserts. 16 x 16 mm shank for rigid clamping Compatible with 2C DGN inserts (ISCAR) Left-hand cutting orientation for grooving Stable clamping for repeatable grooves A firm, vibration-resistant toolholder base is essential when working to tight tolerances. The square 16 x 16 mm shank provides a stable clamping platform that reduces chatter and improves surface finish, which in turn extends the life of the cutting edge. For production environments this means fewer tool changes and more predictable cycle times; the robust geometry translates directly into repeatable groove profiles and less rework on turned parts. Precision cutting for narrow-width operations Designed for narrow parting and grooving, this holder accommodates a 2 mm cutting width and a maximum grooving depth of 16 mm, enabling controlled material removal on delicate components. The left-hand orientation suits setups where the tool must engage from the left, and the holder’s compact form minimises overhang, improving rigidity at the cut. The result is efficient, accurate groove formation with minimal material wastage and consistent dimensional control across batches. The D727TM balances control and accessibility for tight-tolerance operations. Compatibility that saves setup time and stock complexity Compatibility with standard indexable inserts simplifies procurement and reduces storage complexity. The holder accepts 2C DGN inserts and is compatible with ISCAR insert grades, following an ISO designation of 1616, which allows easy matching of insert geometries and materials. With an overall length of 125 mm and a mass of 0.26 kg, the holder offers a practical reach without unnecessary bulk, making it straightforward to handle during tool changes and machine set-up while contributing minimal additional load to the turret. For workshops seeking a dependable left-hand grooving solution from Teknik Cutting Tools, contact Metav Werkzeuge for purchase and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing turning processes Technical data Article number: D727TM Eclass: 21181005 Manufacturer: Teknik Makina SKU: D727TM Facts Shank dimensions: 16 x 16 mm Cutting width: 2 mm Max grooving depth: 16 mm Overall length: 125 mm Weight: 0.26 kg Cutting direction: Left Special features Compatible inserts: 2C DGN Suitable for inserts by ISCAR ISO designation: 1616 Toolholder type: parting/grooving FAQ Which indexable inserts fit this holder? This holder accepts 2C DGN indexable inserts and is compatible with ISCAR insert types for the D727TM parting tool holder. What is the maximum grooving depth? The maximum grooving or parting depth for this holder is 16 mm, suitable for most standard narrow-width operations. What are the shank dimensions and form? Shank dimensions are 16 x 16 mm, square profile, providing rigid clamping and reduced vibration for consistent grooves. Is the holder suitable for left-hand operations only? Yes, the holder is specified for left-hand cutting orientation and is optimised for setups that require engagement from the left side. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Grooving Tool Holder 4mm Cut Width, 18mm Max Cut Depth, 125mm Overall Length, 1616 ISO, 4C-R MGM, For 4C MGM Insert, Right-Hand Cutting, Innenkühlung - Teknik Makina
Take advantage of the combination of precise 16 mm shank stability, a 4 mm cutting width for narrow grooves and a compact 125 mm overall length to maintain consistent parting cycles and reduced set-up times; order the holder via Metav Werkzeuge or request technical clarification from our consultants. Teknik Makina Parting and Grooving Toolholder D675TM — 16 mm shank, 4 mm cutting width A Teknik Makina Parting and Grooving Toolholder D675TM designed for right-hand cutting in lathe turning, compatible with 4C MGM inserts for reliable narrow-slot and parting operations 16 mm shank diameter for stable clamping 4 mm cutting width for narrow grooving Max plunge depth 18 mm for medium-depth cuts Compatible with Korloy 4C MGM inserts Stable clamping for reduced vibration and repeatable cuts The holder is engineered around a 16 mm shank, providing a firm mounting interface and improved rigidity during parting tasks. Its 125 mm overall length keeps the centre of mass close to the turret, which helps reduce chatter and maintain surface quality when removing narrow sections. With a mass of 0.273 kg, the component is light enough for rapid tool changes yet robust enough to preserve alignment under moderate cutting forces. These attributes combine to shorten set-up times and deliver consistent results across repetitive production batches. Precise narrow-slot capability with optimised insert fit Featuring a 4 mm cutting width, the toolholder is intended for tight-groove and parting applications where material removal must be controlled. The clamping design accepts 4C MGM style inserts and is specified as compatible with Korloy inserts, enabling readily available grades and geometries for chip control and edge life. The compact cutting width supports fine-turning operations and reduces material waste per cut, contributing to improved cycle efficiency and predictable component tolerances. Medium-depth capacity and right-hand operation for workshop versatility The holder provides a maximum plunge depth of 18 mm, suitable for many common parting and grooving tasks on medium-diameter workpieces. It is configured for right-hand cutting, matching standard turret orientations and simplifying process planning across conventional lathes. The item carries the ISO-related shank identification 1616, and the corresponding bar designation 4C-R MGM clarifies compatibility with established toolpost systems, minimising ambiguity at procurement and helping to lower inventory complexity. Easy integration and reliable everyday performance Designed for straightforward integration into production workflows, this toolholder balances compact dimensions with precise clamping to maintain edge stability and repeatability. The combination of a stable shank, controlled cutting width and clear insert compatibility reduces trial runs and supports faster qualification for new workpieces. For operations seeking dependable parting results and predictable tool life, the holder delivers practical performance with minimal fuss. Contact Metav Werkzeuge for personalised technical advice and prompt supply from Emmerich; request detailed specifications or an application match for the Teknik Makina D675TM parting and grooving toolholder. Technical data Article number: D675TM Manufacturer: Teknik Makina Designation: Parting and grooving toolholder (Stechklemmhalter) Facts Shank/head width: 16 mm Cutting width: 4 mm Max plunge depth: 18 mm Overall length: 125 mm Weight: 0.273 kg Cutting direction: right-hand Special features Compatible inserts: 4C MGM Compatible insert manufacturer: Korloy ISO designation: 1616 Toolholder bar designation: 4C-R MGM FAQ Which inserts fit this toolholder best? The toolholder accepts 4C MGM inserts; Korloy 4C MGM grades are stated as compatible for the Teknik Makina D675TM. Is the holder suitable for left-hand cutting? The holder is specified for right-hand cutting; left-hand applications require a mirror-design holder. What is the maximum machining depth for parting operations? Maximum plunge depth is 18 mm, which suits many medium-depth slotting and parting tasks with the D675TM. Which shank size should the turret accept for proper clamping? A 16 mm shank/head width is required for secure mounting of this holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Grooving Toolholder 1616, 3mm Cutting Width, 125mm Overall Length, 3C DGN Compatibility, M4x10 Clamp Screw - Teknik Makina
Take advantage of robust construction, precise clamping and a compact form factor for smooth grooving operations; order this holder through Metav Werkzeuge or contact our advisers for further information. Grooving clamping holder DGN (Teknik Makina) — 16 × 16 mm shank, ISCAR DGN 3C compatible The Grooving clamping holder DGN is a compact toolholder designed for precision grooving and parting tasks on CNC and conventional lathes, compatible with ISCAR DGN 3C indexable inserts. Compact 16 × 16 mm holder shank Compatible with ISCAR DGN 3C inserts Secure clamping with M4×10 socket screw 125 mm overall length, 0.23 kg weight Precise clamping for repeatable groove quality The holder provides precise clamping and consistent tool position thanks to its ISO 1616 designation and rigid construction. By accepting ISCAR DGN 3C indexable inserts, the unit enables repeatable groove profiles with minimal set-up variation, which reduces scrap and rework. This mechanical stability translates into measurable gains in part consistency and machine utilisation, making the component suitable for medium-precision production runs and workshop environments that demand predictable results. Fast set-up and secure fixing to reduce downtime A single M4×10 socket clamping screw combined with a T15 hex key allows safe and quick insert changes without complex adjustment. The straightforward clamping reduces cycle interruptions and supports efficient tool maintenance routines. The low mass and compact geometry ease handling during changeovers and contribute to shorter machine idle time, which supports a more economical production workflow while maintaining cutting-edge reliability. Compact design for access in confined toolpaths With a shank of 16 × 16 mm and an overall length of 125 mm, the holder is engineered to reach tight grooves and operate in limited clearance conditions. The 3 mm cutting width and 16 mm maximum cutting depth suit narrow grooving and light parting operations where controlled chip evacuation and operator accessibility are essential. The compact form factor helps integrate the holder into multi-tool turrets or small lathe setups without compromising rigidity. Clear compatibility and practical application notes Designed specifically for DGN 3C inserts, the clamping holder matches common grooving geometries and simplifies inventory management by aligning with established insert lines. The ISO-style 1616 designation denotes the standardised shank interface, enabling straightforward mounting in compatible toolposts or boring bars. For operations that require predictable insert seating and simple replacement, this holder provides a pragmatic solution that balances performance with workshop practicality. For reliable grooving performance and expert guidance on application, contact Metav Werkzeuge to request the Teknik Makina Grooving clamping holder DGN (SKU D022TM) and benefit from local advice and supply from Emmerich. Technical data Article number: D022TM Manufacturer: Teknik Makina Facts Shank width: 16 mm Shank height: 16 mm Cutting head width: 16.2 mm Overall length: 125 mm Total height: 16 mm Cutting width: 3 mm Max cutting depth: 16 mm Weight: 0.23 kg Features ISO designation: 1616 Compatible with ISCAR DGN 3C inserts Clamping screw: M4×10 Hex key size: T15 Bohrstangen designation: 3C DGN FAQ Which inserts fit this holder? The Grooving clamping holder DGN accepts ISCAR DGN 3C indexable inserts; the design ensures correct seating and repeatable geometry for grooving tasks. What are the key dimensions to check for machine compatibility? Important dimensions are the 16 × 16 mm shank and 125 mm overall length; confirm these match the toolpost or boring bar seat before mounting the DGN holder. How is the insert secured in the holder? The insert is clamped using an M4×10 socket screw; assembly and removal require a T15 hex key for reliable fixation and fast changeovers. Is this holder suitable for compact lathes or small turrets? The compact shank and 125 mm length make the holder well suited to confined toolpaths and smaller turret spaces where rigidity and access are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Mini Boring Holder D16 d06 L88, Precision Clamping - Teknik Makina
Compact, compact and precise: the combination of a 16 mm shank, 88 mm overall length and a secure clamping design ensures clean parting and reliable grooving in confined set-ups; order the mini parting toolholder directly via Metav Werkzeuge or consult our specialists for tailored advice. Mini parting toolholder D16 d06 L88 – compact 16 mm shank, 88 mm overall length by Teknik Makina The mini parting toolholder D16 d06 L88 is a compact clamping holder engineered for precision grooving and parting operations on small lathes and confined workspaces. Compact 16 mm shank for small lathes 88 mm overall length for tight set-ups Robust clamping for stable tool holding Engineered for confined turning and grooving The compact design centres on a 16 mm shank and an 88 mm overall length, making this toolholder ideal where space is limited. As a mini clamping solution, it enables precise positioning of cutting inserts close to the workpiece, reducing unsupported overhang and lowering the risk of chatter. Reduced overhang directly improves cut stability and increases insert life, which in turn enhances throughput and reduces scrap rates in small-batch production. Secure clamping to improve surface quality and repeatability A focused clamping mechanism provides secure clamping and consistent axial support for parting and grooving inserts, translating into repeatable cut depths and better surface finishes. By stabilising the insert, the holder minimises vibration during engagement; this leads to fewer tool changes and predictable cycle times. For workshops aiming to raise first-pass yield, the emphasis on stability is a measurable gain in both efficiency and cost control. Fast integration and straightforward tool changes for busy shops The short overall length and standard shank diameter allow quick exchange between toolposts and collets commonly found on compact lathes. The holder’s geometry supports simple set-up routines and predictable tool offsets, shortening machine downtime during changeovers. In practice, this means faster job completion in constrained production cells and an easier workflow for technicians handling a variety of parting widths and depths. Reliable component for repetitive production demands Manufactured by Teknik Makina and listed as SKU DC332TM, this mini parting toolholder is built for repeated use in demanding environments. The emphasis on mechanical rigidity and consistent clamp force contributes to dependable long-term performance, supporting continuous operations without frequent readjustment. Regular inspection of the clamping faces and torque checks will preserve accuracy and extend service life. For purchasing advice or to order the Teknik Makina mini parting toolholder directly from Metav Werkzeuge, contact Metav Werkzeuge’s specialists for tailored recommendations and delivery from our Emmerich stock — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930. Technical Data SKU: DC332TM Product: Mini parting toolholder Model designation: D16 d06 L88 Manufacturer: Teknik Makina ECLASS: 21181005 Facts Shank diameter: 16 mm Overall length: 88 mm Special features Label: 16mm Mini parting toolholder L88mm Product type: Mini parting toolholder Category: Machining (Zerspanen) FAQ What shank diameter does the holder require? The holder accepts a 16 mm shank and is specified for compact toolposts suitable for small lathe installations. Is the holder suitable for standard parting inserts? Yes; the mini parting toolholder (Teknik Makina, SKU DC332TM) is designed to accommodate common parting and grooving inserts used in compact turning operations. How does the short overall length benefit workshop setup? A shorter overall length reduces unsupported tool overhang, improving stability and enabling operations in tight fixtures typical of small-batch production. Can the holder help reduce insert wear? By providing secure clamping and reduced vibration, the holder contributes to longer insert life and more consistent surface finishes. Is extensive modification required to fit most small lathes? No major modification is normally necessary; the compact shank and standard geometry allow straightforward integration with common clamps and toolposts. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Mini Clamping Holder, M6 Thread, 88mm Length, 4mm Shank - Teknik Makina
Take advantage of compact, reliable clamping with the combination of a 16 mm clamping diameter and an M6 thread for secure mounting; the holder’s 88 mm overall length and light weight support stable, low-inertia turning operations. Order the holder directly via Metav Werkzeuge or contact our consultants for compatibility advice. Mini parting clamp holder — compact parting and grooving toolholder by Teknik Makina, M6 thread & 16 mm diameter The Mini parting clamp holder is a compact toolholder for light parting and grooving on small lathes and bar-machining setups, designed to deliver stable clamping in restricted spaces Compact 88 mm overall length 16 mm clamping diameter M6 thread interface Lightweight 0.169 kg Precise clamping for fine turning and grooving The holder offers precise clamping for small turning and grooving tasks by combining a 16 mm clamping diameter with a secure M6 thread interface. The clamping diameter describes the part of the holder that supports and centres the cutting blade or small tool shank, so the result is reduced chatter and improved surface finish compared with undersized supports. The integrated 4 mm mounting bore enables compatibility with many compact tool posts and adapters; the nominal values translate directly into reliable repeatability at the tool tip and predictable cutting behaviour in short-reach operations. Compact form factor for constrained machine setups The compact 88 mm overall length and a mass of 0.169 kg keep rotating and static moments low, which helps to preserve tool life and reduce vibration in light-duty turning. The reduced length allows installation in close-quarter tool stations and bar-feeding applications where reach and clearance are limited. Lightweight construction contributes to quicker tool indexing and less load on quick-change systems, while the combination of the 4 mm mounting bore and the M6 thread provides straightforward mechanical interface options for existing fixtures and clamping adapters. Fast setup, consistent results and trusted provenance Assembly and adjustment are intentionally simple: the M6 thread secures the holder to the mounting point, and the clamping face delivers a firm seat for small parting blades or grooving implements, shortening setup times and increasing process uptime. The design focuses on function — compact dimensions, predictable geometry and low mass — to support efficient production in workshops and small-batch environments. Manufactured by Teknik Makina and identified as DC314TM, the component meets expectations for a dependable workshop-grade toolholder; combined with Metav’s distribution and service, it forms part of a supply chain that balances accessibility and consistent quality. Contact Metav Werkzeuge to check fitment for specific lathes or to request technical drawings for the Teknik Makina Mini parting clamp holder DC314TM — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice Technical data Article number: DC314TM Name: Mini parting clamp holder Brand: Teknik Makina Facts Clamping diameter: 16 mm Mounting bore: 4 mm Thread: M6 Overall length: 88 mm Weight: 0.169 kg Special features Compact design for restricted tool stations Suitable for small parting and grooving jobs Low mass for reduced inertia Robust M6 threaded mounting FAQ What applications suit this mini clamping holder? The mini parting clamp holder DC314TM is suitable for light parting and grooving on small lathes and bar-work machines where compact reach and stable clamping are required. Which mounting interfaces are supported? The holder features a 4 mm mounting bore and an M6 thread, allowing attachment to common compact tool posts and adapters designed for small turning operations. Is the holder compatible with standard parting blades? Yes; the 16 mm clamping diameter provides a stable seat for narrow parting blades and grooving tools typically used in fine turning, provided blade geometry matches the holder’s clamping face. How does the design reduce vibration during cutting? Short overall length (88 mm) and a low weight (0.169 kg) reduce leverage and dynamic forces at the tool tip, which helps to lower vibration and improve surface finish in short-reach operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Mini Clamping Toolholder M6 Thread 88mm Length - Teknik Makina
Take advantage of a compact holder that combines precise parting action with secure clamping: its 8 mm shank and M6 clamping thread deliver stable tool engagement in confined setups. Order directly via Metav Werkzeuge or consult our specialists for application advice. Mini parting clamp holder DC344TM – compact clamping holder with 16 mm diameter, M6 thread (Teknik Makina) The Mini parting clamp holder DC344TM is a compact clamping solution designed for fine parting and grooving tasks where space and repeatability matter Compact 88 mm overall length 16 mm effective cutting diameter 8 mm shank for standard tool posts M6 thread for secure clamping Precise clamping for reliable parting performance The primary advantage of this clamping holder is its consistent clamping stability, achieved via the integrated M6 thread and precisely machined seating. A firm clamped tool reduces unwanted vibration during a cut, which directly improves surface finish and repeatability. The short, rigid geometry is especially beneficial in operations that demand accurate engagement over a short cutting span; this means fewer rejects and less rework for small-batch production. The holder’s design prioritises mechanical integrity so that the cutting action remains dependable under normal workshop loads. Space-saving design that simplifies setup and changeover With an overall length of 88 mm and an effective diameter of 16 mm, the holder offers a compact footprint that is easy to position in confined tool posts. The 8 mm shank dimension allows straightforward insertion into many standard clamping systems, shortening setup time and lowering handling complexity. Its low mass (0.142 kg) contributes to reduced inertia, helping to maintain positional stability when making short, controlled cuts. For workshops aiming to streamline tool changes and improve process throughput, the combination of compact size and compatible shank interface provides a practical efficiency gain. Robust integration into existing benches and tooling systems Manufactured by Teknik Cutting Tools and distributed through Metav Werkzeuge, the holder is intended for quick integration with common lathe tool posts and clamping fixtures. The mechanical interface—shank diameter and clamping thread—was selected to match established workshop standards, enabling reliable fitment without the need for extensive adapter work. Where a compact, repeatable parting action is required, this holder contributes to a predictable machining sequence and measurable process stability. Its straightforward mechanical design keeps maintenance simple and supports long-term workshop reliability. For detailed compatibility checks or to order Teknik Cutting Tools’ DC344TM through Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to receive expert guidance and procurement support Technical data Article number: DC344TM Manufacturer: Teknik Makina Product name: Mini parting clamp holder Facts Overall length: 88 mm Diameter: 16 mm Shank diameter: 8 mm Thread: M6 Weight: 0.142 kg Special features Compact design Secure M6 clamping interface Suited to precision parting and grooving FAQ What is the shank diameter of this clamping holder? The shank diameter is 8 mm for the Mini parting clamp holder DC344TM, providing compatibility with many standard tool posts. Which thread is used for clamping the tool? Clamping is secured via an M6 thread on the Teknik Cutting Tools DC344TM mini holder for reliable retention. What is the overall length and cutting diameter? Overall length is 88 mm and the effective cutting diameter is 16 mm for the DC344TM mini parting clamp holder. Is this holder suitable for compact lathe setups? Yes, the compact 88 mm length and low weight of 0.142 kg make the DC344TM well suited to confined lathe tool posts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Mini Tool Holder D16 d07 L88, Precision Clamping - Teknik Makina
Take advantage of the compact 16 mm shank and 88 mm overall length to achieve precise parting and grooving in confined setups; the combination of a small footprint and secure clamping supports steady, repeatable results on space-restricted lathes. Order the Mini parting tool holder directly via Metav Werkzeuge or consult our specialists for compatibility details. Mini parting tool holder DC338TM – 16 mm, L88 (Teknik Makina) The Mini parting tool holder DC338TM is a compact clamping solution engineered for precision parting and grooving in restricted toolpost arrangements and small lathes. Compact design for confined toolposts 16 mm shank diameter for standard toolholders 88 mm overall length for close-proximity turning Secure clamping for repeatable parting operations Precision where space is limited The 16 mm shank and short overall length of this mini holder make it particularly suitable for operations that demand access to narrow or recessed workpieces. A smaller shank reduces the swing envelope and allows the cutting edge to be positioned closer to the component without sacrificing rigidity. For shops facing layout constraints, this compact geometry helps maintain repeatable accuracy while minimising tool interference and the need for fixture modifications. Dependable clamping for consistent production A stable clamping concept is essential for reliable parting performance. The holder’s design focuses on secure clamping, which reduces micro-movements during cutting and therefore diminishes the risk of tool vibration and premature wear. This stability translates directly into fewer rejects and lower rework rates, supporting efficient small-batch and series production where consistent results per cycle are a priority. Integrates into compact workflows for time savings Designed for ease of integration into existing setups, the small form factor supports fast tool indexing and keeps changeover times to a minimum. The reduced bulk of the holder helps operators access tight areas and makes tool management more straightforward across successive operations. Combined with a methodical setup, this results in improved throughput and smoother production flow for precision turning and grooving tasks. Contact Metav Werkzeuge to check compatibility of the Teknik Makina DC338TM mini parting tool holder (16 mm shank, 88 mm length) with current toolposts and to arrange procurement directly from our Emmerich warehouse. Technical data Article number: DC338TM Label: 16 mm mini parting tool holder L88 mm Manufacturer: Teknik Makina Key dimensions Shank diameter: 16 mm Overall length: 88 mm ECLASS: 21181005 Design and features Mini parting tool holder design Compact footprint for restricted toolposts Secure clamping for repeatable operations FAQ What is the shank diameter of this holder? The shank diameter is 16 mm for the Mini parting tool holder DC338TM by Teknik Makina. What is the overall length of the tool holder? Overall length is 88 mm for the Teknik Makina DC338TM mini holder. Is the holder intended for parting and grooving operations? Yes. The DC338TM is designed specifically for precision parting and grooving in confined setups. Can this holder improve repeatability in small-batch production? Its compact design and secure clamping support repeatable accuracy and reduced rework in small-batch workflows. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Mini Toolholder 75mm Overall Length M6 Thread - Teknik Makina
Take advantage of compact design and secure clamping: the combination of a 75 mm overall length, a 16 mm tool capacity and an M6 clamping thread delivers precise parting and grooving in confined setups. Order directly via Metav Werkzeuge or consult the Metav team for integration advice. Mini parting tool clamp holder DC322TM — Compact clamp for parting and grooving, M6 thread, ø16 mm capacity (Teknik Makina) The Mini parting tool clamp holder is a compact clamping solution for precision parting and grooving on small lathes and turning centres, designed to secure short tools where space is limited. Compact 75 mm overall length Holds ø16 mm tool diameter M6 thread for secure clamping Mounting bore ø5 mm for small setups Precise clamping for repeatable parting and grooving The Mini parting tool clamp holder DC322TM is engineered to deliver stable, repeatable clamping in small-scale turning operations. Fitted with an M6 thread, the clamp secures the cutting tool with a reliable metric fixing that is common in workshop tooling, while the ø16 mm capacity accommodates many standard parting and grooving tool shanks. Because the holder locates on a ø5 mm mounting bore, it integrates with compact tool posts and small fixtures without additional adapters. The result is reduced micro-movement at the cutting edge, which directly improves surface finish and extends tool life in precision work. Compact footprint that fits tight setups and retrofit tasks With an overall length of 75 mm and a weight of only 0.135 kg, this clamp is suited for confined tool positions and retrofitting on smaller machines. The compact design minimises overhang and helps maintain rigidity even when working close to chucks or within confined tooling turrets. In practice, shorter overhang and lower mass reduce vibration and deflection during cut-off operations, supporting more consistent parting depths and cleaner grooves. For workshops focused on small-batch production or prototyping, the space-saving profile allows more flexible tool layouts without compromising clamping security. Operational benefits and where it performs best Designed by Teknik Makina for light to medium-duty parting tasks, the clamp holder is ideal where a small, dependable fixture is required. The straightforward metric thread and defined diameters make setup quick and predictable; the compact clamp suits applications such as model work, watchmaking components, surgical instrument pre-machining and other precision turning jobs. For equipment planners and workshop managers, the clear specification—M6 thread, ø16 mm tool capacity, ø5 mm mounting, 75 mm length—enables precise integration decisions and predictable performance in constrained environments. Contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machines and to arrange supply from Emmerich Technical Data Article number: DC322TM Manufacturer: Teknik Makina SKU: DC322TM Facts Overall length: 75 mm Tool diameter capacity: ø16 mm Mounting diameter: ø5 mm Thread: M6 Weight: 0.135 kg Special features Mini clamping holder Compact design for tight setups Secure M6 clamping Designed for parting and grooving FAQ What tool shank diameter does this holder accept? The holder accepts tool shanks up to ø16 mm, as specified for the Mini parting tool clamp holder DC322TM. What is the required mounting bore? Mounting is on a ø5 mm bore; the clamp is designed to fit small tool posts and compact fixtures. Which thread type secures the tool? Clamping is effected via an M6 thread, providing a metric, workshop-standard fixing for secure retention. Is this clamp suitable for small lathes and turrets? Yes, the compact 75 mm length and lightweight 0.135 kg construction make the clamp suitable for small lathes and constrained turret positions. Who manufactures this clamp and what is the SKU? The clamp is manufactured by Teknik Makina and sold as the Mini parting tool clamp holder, SKU DC322TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Mini Turning Clamp Holder D09 K20 L093 For D09 Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the combination of a compact 93 mm overall length, a 16 mm shank and compatibility with D09 indexable inserts for reliable parting and grooving in confined toolpost spaces; order directly via Metav Werkzeuge or consult their specialists for integration advice. Mini parting tool clamping holder — compact 16 mm shank, for D09 indexable inserts (Teknik Makina) The Mini parting tool clamping holder is a compact clamping solution for precision parting and grooving on lathes and turning centres. Compact 93 mm overall length 16 mm shank for standard toolposts Compatible with D09 indexable inserts Space-saving build that keeps setups stable The compact format with a 93 mm overall length and a 16 mm shank is designed for workshops where toolpost clearance is limited. The reduced overhang contributes to greater rigidity, which in turn lowers the tendency for chatter during parting operations. For machinists seeking a tidy setup, the short footprint of this clamping solution makes tight fixtures practical while maintaining an accurate cut profile. The holder’s lightweight construction (approx. 0.102 kg) further minimises dynamic load on the toolpost and simplifies handling during changeovers, supporting a steady machining process without complex adjustments. Efficient parting with indexable inserts and defined cutting geometry Engineered for use with D09 indexable inserts, the holder accepts standard insert formats to keep tooling costs manageable and changeovers rapid. The 20 mm cutting height and nominal 9 mm cutting diameter offer a clear guideline for selecting inserts and setting the tool height, aiding repeatable alignment across batches. Using indexable inserts reduces downtime compared with brazed tools and provides a predictable wear cycle that simplifies maintenance scheduling. The holder’s ISO shank designation S16 aligns with common toolpost adaptors, making it straightforward to integrate into existing lathe tooling systems. Professional sourcing and workshop continuity Supplied by Teknik Makina and available through Metav Werkzeuge, this clamping solution is intended for professional use in industrial and craft workshops where reliability and predictable supply matter. The combination of a standard shank, defined insert compatibility and compact geometry supports quick replacement and consistent part quality in serial turning. Metav’s distribution model emphasises dependable fulfilment from its Emmerich hub, reducing procurement complexity for workshops that require a broad but reliable range of tooling. For specific technical integration questions, the Metav team can advise on compatibility with existing toolposts and insert grades. Contact Metav Werkzeuge today to request detailed technical guidance on the Teknik Makina mini parting tool clamping holder (SKU K812TM) and to arrange prompt delivery or expert consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K812TM Manufacturer: Teknik Cutting Tools Designation: Mini parting tool clamping holder Brand: Teknik Makina Data Shank diameter: 16 mm Cutting height: 20 mm Cutting diameter: 9 mm Overall length: 93 mm Weight: 0.102 kg Shank designation (ISO): S16 Holder designation: D09 K20 L093 Special features For indexable inserts D09 Compact mini design for restricted toolposts Lightweight construction for reduced dynamic load FAQ What insert type is compatible with this holder? The holder is designed for D09 indexable inserts, enabling fast index changes and cost-effective wear management for parting tasks. Which shank size fits the toolpost? The clamping holder uses a 16 mm shank (ISO designation S16), suitable for standard adaptors and compact toolposts. What are the key dimensions to consider for setup? Important dimensions include the 93 mm overall length, 20 mm cutting height and 9 mm cutting diameter, which guide tool height setting and clearance planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Mini Turning Clamp Holder For Indexable Inserts, M6 Thread, 88mm Overall Length - Teknik Makina
Take advantage of the compact design and secure clamping for efficient steel turning operations; the combination of a 16 mm diameter shank, an M6 fastening thread and long service life supports continuous production. Order the part directly via Metav Werkzeuge or consult the technical team for application guidance. Mini parting clamp holder DC304TM — compact 16 mm shank, 88 mm overall length (Teknik Makina) The Mini parting clamp holder is a compact turning accessory for secure clamping of indexable inserts in precision steel machining applications Compact 16 mm shank for tight setups Secure clamp for indexable inserts M6 fastening thread for stable assembly Lightweight 0.134 kg reduces holder inertia Space-saving design that maintains cutting stability The compact geometry delivers access into confined tool positions while maintaining stable clamping during parting and grooving tasks. With a 16 mm shank and an 88 mm overall length, the holder is designed to reach narrow areas without compromising rigidity. The combination of small footprint and robust form reduces vibration and supports consistent chip formation, which in turn contributes to higher process reliability and predictable cycle times. Reliable clamping for indexable inserts and durable performance Designed for use with indexable inserts, the clamp mechanism secures the cutting edge with consistent force, helping to prolong insert life and reduce unplanned tool changes. Built for high-class steel machining, the toolholder's geometry aims to transfer cutting forces efficiently so that wear is reduced and tool life is extended. The result is measurable productivity gains through fewer interruptions and a steadier surface finish. Easy integration and low-mass handling for better machine dynamics With a weight of 0.134 kg and an M6 thread for attachment, the holder integrates easily into existing turning toolposts and modular tool systems. The low mass reduces holder inertia, improving acceleration and deceleration behaviour during short-cut cycles. For complex applications or material-specific settings, application advice is available from Metav Werkzeuge consultants to ensure the component meets process requirements and set-up preferences. Secure reliable clamping performance from Teknik Makina — contact Metav Werkzeuge in Emmerich for technical consultation or to request delivery details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DC304TM Manufacturer: Teknik Makina Weight: 0.134 kg Facts Diameter: 16 mm Overall length: 88 mm Clamping bore: 3 mm Thread: M6 Special features For indexable inserts Suitable for high-class steel machining Compact design for tight set-ups Long service life FAQ Which insert types are compatible with this holder? The holder DC304TM by Teknik Makina is intended for use with standard indexable inserts designed for parting and grooving applications; insert seat geometry should be checked against the intended insert family. What are the key dimensions to consider when fitting the holder? Important dimensions include the 16 mm diameter shank, the 88 mm overall length, and the M6 fastening thread; these determine fitment and reach in the toolpost. Is the holder suitable for heavy steel machining? The design is specified for high-class steel machining and offers stable clamping to support demanding parting operations while promoting insert life. How does the holder affect machine dynamics? With a low mass of 0.134 kg, the holder minimises added inertia, improving the machine’s responsiveness during short cycles and frequent tool movements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Mini-Stechklemmhalter 88mm, M6 Thread - Teknik Makina
Secure precise parting operations with a compact combination of M6 thread clamping and a slender 88 mm overall length; the lightweight design supports fast setup and reduced overhang. Order the Mini parting clamp holder directly via Metav Werkzeuge or ask our consultants for specification advice. Teknik Makina Mini parting clamp holder — compact 88 mm, M6 thread Mini parting clamp holder designed for compact turning and parting tool clamping in restricted setups Compact 88 mm overall length M6 threaded clamp for secure fixing Compatible with 10 mm shank diameter Lightweight at 0.13 kg Precision clamping for compact turning and parting The holder is engineered as a compact clamping solution for parting and grooving applications where machine space is limited. With an 88 mm overall length and a 10 mm shank interface, the design reduces tool overhang and improves rigidity at the cutting point. The M6 thread provides a direct, mechanically robust clamping method that secures the cutting insert or toolholder with minimal play. By converting technical specifications into practical benefits, the result is a measurable increase in stability and consistent cutting performance for short-reach operations. Fast fitting and consistent performance Installation and adjustment are straightforward thanks to the standard M6 thread, which allows rapid tightening with commonly available tooling. The compact geometry and lightweight construction mean less inertia and a lower tendency to excite vibration during parting cuts. This leads to improved surface quality and fewer rework cycles in batch production or prototype turning. The simple mechanical clamping principle is explained clearly for engineers and workshop technicians who need reliable, repeatable setup without complex calibration procedures. Small footprint, big workshop value A small clamp holder such as this one makes inventory and fixture planning easier: it occupies little space on the toolpost and is well suited to machines with limited turret clearance. The reduced mass and compact form support shorter setup times and a neater tooling arrangement, which can contribute to smoother workflow on the shop floor. For workshops seeking to streamline tooling ranges while maintaining dependable parting capability, this compact clamp holder represents a practical choice from Teknik Makina, combining functional simplicity with solid mechanical design. Contact Metav Werkzeuge for tailored advice on the Teknik Makina Mini parting clamp holder (DC350TM) and to confirm compatibility with existing toolholders — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DC350TM Name: Mini parting clamp holder Manufacturer: Teknik Makina Numerical data Overall length: 88 mm Shank / tool interface diameter: 10 mm Tool diameter: 16 mm Thread: M6 Weight: 0.13 kg Special features Compact clamp holder for parting/grooving M6 threaded clamping for secure fixing Lightweight design for reduced overhang Suitable for compact toolpost arrangements FAQ What is the manufacturer and SKU for this clamp holder? The Mini parting clamp holder is supplied by Teknik Makina and referenced as SKU DC350TM in our system. Which key dimensions define suitability for tight setups? The defining measures are an 88 mm overall length, a 10 mm shank interface, a 16 mm tool diameter, and an M6 thread, combined with a weight of 0.13 kg. How does the M6 thread affect clamping reliability? The M6 threaded clamp supplies a direct mechanical connection that ensures secure clamping and minimal movement of the cutting tool during parting, improving repeatability. Is this holder appropriate where vibration control is a concern? The compact form and lightweight construction reduce overhang and inertial forces, which helps to lower the tendency for chatter in short-reach parting operations. Which workshop applications suit this clamp holder best? The holder is intended for compact turning and parting set-ups where space is limited and robust, repeatable clamping is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Stech Tool Holder 2mm Cutting Width, 18mm Max Plunge, 125mm Overall Length, 1616 ISO, 2C-R S224, For Horn Inserts, Internal Cooling, Right-Hand Cutting - Teknik Makina
Take advantage of a compact, robust clamping solution that combines precise 2 mm cutting width, compatibility with Horn indexable inserts and a secure clamping geometry for repeatable parting and grooving operations; order directly via Metav Werkzeuge or ask the consultants for application support. Teknik Makina Parting and Grooving Clamping Holder D700TM — 16 mm profile, 2 mm cut width The Parting and Grooving Clamping Holder D700TM from Teknik Makina is a right-hand clamping tool designed for parting-off and grooving tasks in precision turning, compatible with Horn indexable inserts Right-hand cutting direction Compatible with Horn indexable inserts 2 mm cutting width for fine grooves 125 mm overall length for controlled reach Secure clamping for consistent parting and grooving results The holder offers a stable clamping interface that keeps insert seating firm under load, reducing vibration and rework. A 16 mm holder profile and the ISO designation 1616 ensure familiar mounting geometry for many turret and quick-change systems; the compact form helps maintain rigidity even with a moderate overhang. With a specified 2 mm cutting width, the tool is intended for narrow parting and precision groove preparation, where repeatable kerf width and predictable chip formation are required. The right-hand cut orientation is clearly defined, allowing setup planners to place the tool correctly in multi-station turrets without ambiguity. Compact geometry that improves process stability and tool life At an overall length of 125 mm and a weight of 0.258 kg, the toolholder is balanced for short to medium overhangs, which supports higher stability and better surface finishes. The combination of 16 mm head width and a maximum grooving depth of 18 mm provides a trade-off between access and stiffness, enabling controlled cutting forces during parting operations. Reduced deflection and more secure insert clamping translate directly into longer insert life and fewer machine interventions, improving uptime in production turning cells. Designed for compatibility and straightforward integration The clamping holder is specified to accept Horn-manufactured indexable inserts, simplifying procurement and ensuring insert availability on-site. Its matching bar designation 2C‑R S224 facilitates checking holder-to-bar fit during tool setup. The clear ISO reference and standardised profile reduce the need for customised tool-adapters and permit fast changeovers. For teams planning process documentation, the nominal dimensions and the right-hand cutting assignment make cycle planning and NC-program annotation more precise. Practical benefits for workshop and production environments Using a standardised, compact parting holder reduces setup time and supports consistent quality across batches. The holder’s modest mass and clear geometric references assist in optimising turret balance and avoiding unnecessary counterweights. Where fine grooves and narrow parting cuts are frequent, the specified 2 mm kerf and the secure clamp design help achieve repeatable part geometry, which reduces scrap and downstream machining corrections. The tool is therefore suited to precision workshops and jobbing operations that prioritise reliable, low-variation turning outcomes. For application advice, process integration or to secure stock from Metav Werkzeuge, contact our consultants at Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com; order the Teknik Makina D700TM for reliable, compact parting solutions. Technical data Article number: D700TM Manufacturer: Teknik Makina Weight: 0.258 kg Overall length: 125 mm Holder profile / height: 16 mm Head width: 16 mm Cutting width: 2 mm Maximum grooving depth: 18 mm Cutting direction: right Compatible with Horn indexable inserts ISO designation: 1616 Bar designation: 2C-R S224 Application: parting and grooving Storytrigger: stechklemmhalter FAQ What materials is the holder suitable for? The Parting and Grooving Clamping Holder D700TM is a mechanical holder; suitability depends on the chosen Horn inserts and cutting data rather than the holder itself Is the cutting direction fixed or reversible? The holder is designed for a right-hand cutting direction and should be mounted accordingly for correct parting and grooving orientation Which inserts fit this clamping holder? This holder is specified for Horn indexable inserts; consult Horn insert catalogues for matching grades and geometries to the required material and finish Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Stechklemmhalter 1616 2C DGN For DGN 2C Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, workshop-ready grooving solution that combines a small 16 × 16 mm cross-section with compatibility for DGN 2C indexable inserts and a secure M4x10 clamping screw; procured and supported via Metav Werkzeuge for reliable supply and technical advice. D020TM — Grooving clamp holder DGN (16 × 125 mm, for DGN 2C inserts) by Teknik Makina D020TM is a compact grooving clamp holder designed for external grooving and parting operations with DGN 2C indexable inserts, suitable for precision shopfloor use. Compact 16 × 16 mm cross-section Compatible with DGN 2C indexable inserts M4x10 clamping screw, T15 hex key required 125 mm overall length, 16 mm maximum plunge depth Consistent clamping for accurate grooves The holder delivers a rigid clamping interface that stabilises the insert during cutting, which reduces chatter and improves surface finish. With a square shank of 16 mm and a cutting-head width of 16.2 mm, the unit offers a small footprint while maintaining stiffness. The design focuses on consistent results in repeat operations, translating tool geometry into predictable groove profiles and less rework. This results in improved process reliability for medium-duty turning and grooving tasks. Secure insert fit and fast changeovers Compatibility with DGN 2C indexable inserts and alignment to common ISCAR geometries ensures straightforward insert selection and interchangeability. The clamp is fastened with an M4x10 hex screw and requires a T15 key, enabling quick, repeatable tightening without complex tooling. Fast changeovers reduce machine downtime and support higher productivity in batch production. The simple clamping principle also makes it easy to verify correct seating and torque during routine checks. Space-saving design that supports workshop workflows At an overall length of 125 mm and a total height of 16 mm, the holder integrates easily into compact turret stations and small lathes. The specified maximum plunge depth 16 mm and 2 mm cutting width are suitable for common external grooving and parting tasks where controlled chip evacuation matters. Weighing 0.23 kg, the component is light to handle yet sufficiently rigid for stable cutting. The ISO-style designation 1616 simplifies toolholder selection and inventory management in the tooling cupboard. For precise grooving with the Teknik Cutting Tools DGN system, contact Metav Werkzeuge for tailored advice and reliable dispatch from Emmerich. Technical Data Article number: D020TM Description: Grooving clamp holder (DGN) Manufacturer: Teknik Makina Compatible inserts: DGN 2C Compatible insert manufacturer: ISCAR Clamping screw: M4x10 Hex key size: T15 Facts Shank width: 16 mm Shank height: 16 mm Cutting-head width: 16.2 mm Overall length: 125 mm Overall height: 16 mm Maximum plunge depth: 16 mm Cutting width: 2 mm Weight: 0.23 kg Special features ISO designation: 1616 Bore bar designation: 2C DGN Suited for external grooving and parting Lightweight, compact design Fast clamping with M4x10 screw FAQ Which indexable inserts fit this holder? The holder accepts DGN 2C format indexable inserts; ISCAR DGN 2C types are a direct match for the seating geometry. Is the D020TM suitable for parting-off on small lathes? The compact 16 × 16 mm shank and 125 mm length make the D020TM appropriate for many small-lathe setups, provided the turret or toolpost accepts a 16 mm square shank. What tool is required for clamping and how tight should it be? Clamping uses an M4x10 hex screw and a T15 key. Recommended torque values depend on machine and application; follow insert supplier guidance for clamping torque to ensure secure seating without over-tightening. How deep can the holder cut in one pass? The nominal maximum plunge depth is 16 mm, which defines the limit for safe, controlled grooving with standard DGN 2C inserts. Can the holder be kept as a spare for mixed-brand inserts? Yes; because the seating matches the DGN 2C geometry, the holder can be used with DGN 2C inserts from multiple manufacturers that adhere to the same indexable insert standard. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Stechklemmhalter 1616 2C MGMN 200 For MGMN 200 Wendeplatten Innenkühlung - Teknik Makina
Take advantage of a compact solution that combines ISO 1616 shank stability, precise MGMN 200 insert compatibility and a 16 mm maximum parting depth for consistent production results — order the parting tool holder directly via Metav Werkzeuge or consult our specialists for integration advice. Parting tool holder D011TM — MGMN 200 compatibility, 16 x 16 mm ISO shank (Teknik Makina) A parting tool holder D011TM designed for precision parting and grooving tasks, compatible with MGMN 200 indexable inserts and optimised for stable clamping in 16 x 16 mm toolholders. ISO 1616 shank for stable clamping Compatible with MGMN 200 inserts Max parting depth 16 mm Quick clamp screw M4x10, key T15 Consistent cuts through rigid shank design The holder is engineered around an ISO 1616 (16 x 16 mm) shank that delivers high rigidity during transverse cutting operations. This structural stability reduces vibration and lateral deflection, which directly improves repeatability and surface finish when parting or grooving. For production environments where cycle-to-cycle consistency matters, the solid shank geometry translates into fewer rejects and longer insert life. Fast insert changes and proven compatibility Designed specifically for MGMN 200 indexable inserts (Korloy), the clamping concept uses an M4x10 clamping screw with a T15 hex key interface for secure, repeatable fastening. This arrangement permits swift insert replacement and reliable seat contact, lowering downtime during tool changes and simplifying maintenance in busy turning cells. The accepted insert form also ensures access to a broad range of grades for different materials. Geometry tuned for efficient parting With a maximum parting depth of 16 mm and a cutting width of 2 mm, the tool holder is optimised for narrow-part cutting and groove preparation. The slightly enlarged cutting-head width of 16.2 mm provides the necessary clearance for secure insert seating while the overall length of 125 mm offers reach without compromising stiffness. These measured proportions help maintain cutting stability and enable predictable chip flow in many turning applications. Integration, traceability and workshop fit Weighing only 0.23 kg, the holder is compact to handle and store while being robust enough for daily shop use. The ISO designation and clear compatibility with Korloy inserts make it straightforward to specify in CAM setups and tool lists. For workshops consolidating tooling suppliers, this component supports a standardised approach to clamping and inventory, helping to reduce procurement complexity and speed up machine changeovers. Contact Metav Werkzeuge today to discuss how the Teknik Makina parting tool holder D011TM fits specific production lines or to request tailored tooling advice from our specialists at Metav Werkzeuge Technical data Article number: D011TM SKU: D011TM Manufacturer: Teknik Makina Shank designation: ISO 1616 (16 x 16 mm) Overall length: 125 mm Overall height: 16 mm Cutting head width: 16.2 mm Max parting depth: 16 mm Cutting width: 2 mm Compatible insert: MGMN 200 (Korloy) Clamping screw: M4x10 Hex key: T15 Weight: 0.23 kg Measurements / core data Shank width: 16 mm Shank height: 16 mm Cutting head width: 16.2 mm Max parting depth: 16 mm Cutting width: 2 mm Overall length: 125 mm Weight: 0.23 kg Features / Compatibility Compatible with MGMN 200 indexable inserts (Korloy) ISO 1616 designation Clamping screw M4x10 with T15 key For parting and grooving applications FAQ What inserts fit this holder? The holder accepts MGMN 200 indexable inserts; it is specified for MGMN geometry and listed compatibility includes Korloy grades. What is the maximum parting depth? Maximum parting depth is 16 mm, determined by the holder geometry and seat position. Which shank size is required in the toolpost? The holder uses an ISO 1616 (16 x 16 mm) shank and requires a compatible 16 x 16 mm toolpost slot. How is the insert secured? The insert is clamped with an M4x10 screw; a T15 hex key is the recommended tool for tightening. Is this holder suitable for heavy roughing cuts? The holder is intended for controlled parting and grooving up to its rated 16 mm depth; for heavy roughing, a holder with a larger shank and reinforced geometry is advisable. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Stechklemmhalter 1616 3C MGMN 300 For MGMN 300 Innenkühlung - Teknik Makina
A compact, high-stability solution that combines a 16 mm clamping profile, compatibility with MGMN 300 inserts and a short overall length for tight setups. The result is reliable parting performance with low tool change time; order the item directly via Metav Werkzeuge or request advice from the consultants if further specification is required. Cut-off clamping holder MGMN — 16 x 16 mm, 125 mm — Teknik Makina Cut-off clamping holder engineered for precise parting and grooving tasks in small to medium turning centres, compatible with MGMN 300 indexable inserts Compact 16 x 16 mm clamping profile Compatible with MGMN 300 inserts (Korloy) Robust M4x10 clamping screw, T15 hex key Total length 125 mm Lightweight at 0.23 kg for easy handling Consistent clamping for repeatable parting operations The holder delivers a stable 16 mm clamping footprint that minimises vibration and protects insert life during parting operations. The compact geometry and 16.3 mm cutting-head width position the insert accurately, which translates into consistent groove quality and reduced scrap rates. Useful for batch production where uniformity is essential, the construction helps maintain surface finish by keeping the cutting forces aligned; the M4x10 clamping screw ensures secure fixing with straightforward torque application and a T15 hex key interface for quick service. Designed to speed up setup and minimise downtime With a total length of 125 mm and a weight of just 0.23 kg, the tool holder is tailored for tight tool posts and changeovers where accessibility matters. The short overhang reduces deflection and contributes to higher permissible feeds without sacrificing control. Where throughput is critical, the holder’s simple interface with MGMN 300 inserts—an established insert form—reduces the variety of spares required and shortens change intervals. The compact profile therefore supports improved machine uptime and a more efficient production flow. Compatibility explained for workshop planners Supplied for use with MGMN 300 indexable inserts from manufacturers such as Korloy, the holder suits common parting tasks and offers straightforward integration into standard tooling setups. Its ISO designation 1616 and the bores/slots designed for the 3C MGMN 300 bar mean toolroom engineers can plan tool lists with confidence. The holder’s maximum parting depth of 16 mm and a cutting-edge width of 3 mm should be matched to insert grade and machine power; selecting the correct insert geometry and grade will determine surface finish and tool life. Built for practical maintenance and replacement cycles The mechanical design focuses on fast, dependable serviceability: a single M4x10 clamping screw secures the insert seat, and common hex tooling (T15) is used for routine intervention. This reduces tool kit complexity at the machine and lowers the time spent on minor repairs or insert indexing. The result is a holder that is simple to maintain while still offering the positional stability required for repeatable operations in production and jobbing environments. For technical clarification, suitability checks or to order the Teknik Makina cut-off clamping holder (SKU D014TM), please contact Metav Werkzeuge in Emmerich: phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com — our specialists will advise on fitment, delivery and compatible inserts Technical data Article number: D014TM Name: Stechklemmhalter Brand: Teknik Makina Model / Type: MGMN Compatible inserts: MGMN 300 (Korloy) Facts Clamping width: 16 mm Overall height: 16 mm Cutting-head width: 16.3 mm Total length: 125 mm Weight: 0.23 kg Max parting depth: 16 mm Cutting width: 3 mm ISO designation: 1616 Special features For MGMN 300 inserts M4x10 clamping screw T15 hex key interface Bohrstange designation: 3C MGMN 300 FAQ What insert types fit this clamping holder? The holder is designed for MGMN 300 indexable inserts; compatible manufacturers include Korloy, matching the MGMN form factor for secure seating and predictable chip control. What is the maximum parting depth for this tool? Maximum recommended parting depth is 16 mm, specified to maintain stability and repeatable cut-off performance with the designed insert geometry. Which screw and tool are required for insert clamping? Insert clamping uses an M4x10 screw and is tightened with a T15 hex key for routine maintenance and secure fixing. Is the holder suitable for compact tool posts and smaller lathes? Yes — with a 125 mm overall length and a 16 x 16 mm profile, the holder suits tight tool-post arrangements and compact turning centres where reduced overhang is beneficial. What is the SKU and brand for ordering or spare listing? Order under SKU D014TM from Teknik Makina; Metav Werkzeuge can confirm delivery and compatible insert options. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Stechklemmhalter 1616 3C-R TD For 3C TD Innenkühlung Rechtsschneidend - Teknik Makina
A compact right‑hand parting solution that pairs a secure 16 × 16 mm shank clamp with a 3 mm cutting width and an 18 mm maximum plunge depth for reliable separation operations; order directly via Metav Werkzeuge or consult our technical advisors for application support Parting Tool Holder D719TM — right‑hand parting and grooving holder, 16 × 16 mm shank (Teknik Makina) A robust Parting Tool Holder D719TM designed for right‑hand parting and grooving operations; accepts Taegutec 3C TD inserts and fits ISO 1616 shanks Right‑hand cutting direction 16 × 16 mm shank clamping 3 mm cutting width for fine parting Compatible with Taegutec 3C TD inserts Consistent right‑hand performance for tight separation tasks The right‑hand cutting geometry delivers predictable chip flow and repeatable parting results, making the holder well suited to short-cycle production and precision jobbing. With a 3 mm cutting width and an 18 mm plunge depth, the tool is designed for narrow slot cutting and controlled separation where minimised material loss matters. The compact geometry reduces leverage at the clamp and helps to maintain stability during the cut, which supports improved surface finish and lower tool wear compared with less rigid options. Secure clamping and standardised mounting for fast changeovers Clamping is based on the 16 × 16 mm shank format and the holder meets the ISO 1616 shank designation, so integration into existing toolposts or boring bar mounts is straightforward. Compatibility with Taegutec 3C TD inserts and the 3C‑R TD boring‑bar designation enables the use of established insert grades and geometries. The moderate overall length of 125 mm and a mass of 0.256 kg balance reach and rigidity, reducing vibration without excessive overhang, which contributes to stable cutting conditions and longer insert life. Workshop advantages: compact design, reliable handling, easier planning The holder’s compact form factor and standardised interfaces simplify tooling lists and inventory planning for workshops and production lines. The combination of secure clamping and standard insert compatibility permits quick insert changes and predictable reconditioning cycles, which supports uptime and consistent output quality. Where tight dimensional control and repeatability are required, this parting solution integrates into existing setups with minimal adaptation, helping to streamline production planning and reduce handling time. Contact Metav Werkzeuge for tailored application advice or to secure the Teknik Cutting Tools parting tool holder D719TM with swift dispatch from our Emmerich hub Technical data SKU: D719TM Manufacturer: Teknik Makina Product: Parting tool holder Cutting direction: right Compatible inserts: Taegutec 3C TD Shank designation: ISO 1616 Dimensions & weight Shank height: 16 mm Shank width: 16 mm Head width: 16 mm Cutting width: 3 mm Max plunge depth: 18 mm Overall length: 125 mm Weight: 0.256 kg Special features Compatible with Taegutec 3C TD inserts Boring bar designation: 3C‑R TD Right‑hand cutting ISO 1616 shank compatibility FAQ Can the holder accept Taegutec 3C TD inserts? Yes. The parting tool holder D719TM is specified for use with Taegutec 3C TD inserts and supports the associated insert geometries. What are the shank dimensions and mounting standard? The D719TM features a 16 × 16 mm shank and is compatible with the ISO 1616 shank format for straightforward mounting. Is the holder suitable for left‑hand cutting? No. The parting tool holder D719TM is manufactured for right‑hand cutting only. What is the maximum plunge depth for the holder? The maximum plunge depth is 18 mm with a cutting width of 3 mm for controlled parting operations. What are the overall length and weight for setup calculations? Overall length is 125 mm and the weight is 0.256 kg, offering a balance of reach and rigidity for many workshop applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, reliable parting and grooving for precision turning
Parting and grooving tools, also referred to as parting blades, grooving tools or cut-off tools, are narrow carrier tools for lathes fitted with replaceable carbide inserts. Supplied as solid holders or flat blades, they are designed to cut precise grooves and to part finished components cleanly from the material bar.
Why internal coolant matters for deep cuts and tough materials
When used in simple form without internal coolant, the cutting fluid is applied via external machine nozzles; this is often sufficient for very shallow grooves and easily machinable materials. For deeper grooving and parting operations, however, the tool nearly encloses the slot so that external coolant cannot reach the cutting edge. Tools with internal coolant incorporate fine, integrated channels that deliver coolant under high pressure directly to the insert and beneath the chip. This targeted supply controls the intense heat in the confined cutting zone and uses flushing pressure to eject chips reliably, preventing chip jamming, surface damage and sudden tool breakage.
Clear operational benefits you can measure
- faster cycle times through reliable chip evacuation and uninterrupted cutting
- extended tool life thanks to effective heat control at the cutting edge
- consistent surface finish by avoiding chip re-cutting and scarring
- safer machining of hard or ductile materials due to reduced risk of tool fracture
- simplified setup when holders with integrated channels replace complex external coolant rigs
Metav as a practical partner for your workshop
Metav stands for democratisation of precision: decades of expertise, a quality filter in Emmerich and an assortment that supports industry and trade. With more than 48,000 customers and a catalogue of over 250,000 products, Metav provides a focused selection of parting and grooving tools, accessories and matched holders so that procurement and technical choice remain straightforward and dependable.
Parting and grooving tools bring reliable groove geometry and safe parting to turning operations; choosing holders with integrated coolant channels is essential for deep cuts and demanding materials. If technical advice is needed, Metav’s product specialists can help select the appropriate tool geometry and coolant configuration for the application.
FAQ
When is internal coolant necessary for parting tools?
Internal coolant becomes necessary for deep grooving and parting or when machining hard or ductile materials; it delivers coolant directly to the insert and beneath the chip, which is critical when external nozzles can no longer reach the cutting edge.
Can parting tools be used without internal coolant?
Yes — for very shallow cuts and easily machinable materials, parting tools can be used with external machine coolant nozzles, but performance and tool life will drop markedly for deeper cuts.
How do parting tools prevent dangerous chip jamming?
Parting tools with integrated channels use high-pressure coolant to flush chips out of the narrow slot, preventing chips from becoming trapped and minimising the risk of surface damage and abrupt tool failure.
What should be considered when choosing a grooving insert and holder?
Select a combination that matches the required groove depth and material grade; holders offering integrated high-pressure channels are preferred for deep cuts or poor-chip-breaking materials to ensure heat control and reliable chip evacuation.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com