Precision cut-off tools for accurate grooving and part-off operations
Cut-off tools are narrow holder systems for lathes designed to produce precise grooves and part-offs, offering reliable control when machining steels and other workpiece materials where clean separation is essential. They serve as either solid clamp-style holders or flat tool blades fitted with indexable carbide inserts, and when equipped with internal coolant channels they deliver high-pressure coolant directly to the insert to control heat and evacuate chips efficiently. Using these tools reduces the risk of chip jamming, surface damage and sudden tool failure while improving repeatability, particularly in deep grooving and tough materials where external coolant is insufficient. Key advantages include enhanced cutting stability, extended insert life and consistent part quality through optimised chip evacuation and thermal management.
20mm Mini-Stechklemmhalter, M6 Thread, 88mm Overall Length, 10mm Shank - Teknik Makina
Take advantage of a compact design with a 10 mm shank and M6 clamping thread to enable secure, space-saving parting and grooving operations while maintaining high repeatability. The combination of a short overall length and low mass supports stable toolholding in tight toolposts — order directly via Metav Werkzeuge or contact our advisers for tailored guidance. Mini parting tool holder DC352TM — compact clamping holder with 10 mm shank (Teknik Makina) The Mini parting tool holder DC352TM is a compact clamping solution for precision parting and grooving on lathes, engineered for shops and jobbers that require a small, reliable toolholder for confined setups Compact 10 mm shank for tight toolposts Short 88 mm overall length for close-clearance tasks Secure M6 clamping thread for reliable fixation Low mass 0.201 kg reduces toolpost inertia Precision and stability where space is limited The DC352TM combines a 10 mm shank with an 88 mm overall length, making it ideal for applications where a reduced tool projection is essential. Its compact geometry minimises overhang, which reduces vibration and improves surface finish during parting and grooving. Designed for repetitive turning tasks, the compact holder delivers a consistent clamping interface that supports repeatable tool positioning and efficient cycle times in small-batch and maintenance operations. Secure clamping with a fine thread interface A robust M6 thread provides the clamping interface for the cutter or insert seat, offering reliable locking force without excessive clearance requirements. The fine-threaded clamp ensures that cutting edges remain steady under cutting loads, so operators experience fewer interruptions from loosening tools. This technical arrangement benefits machining accuracy and reduces rework, contributing to improved process reliability in everyday workshop use. Compatibility and practical workshop benefits The holder’s dimensions — including the 10 mm shank and a 20 mm head diameter — have been selected to match common miniature toolposts and turret stations. The low mass of 0.201 kg reduces dynamic load on the toolpost, which helps when working with smaller workpieces or when high spindle speeds are required. As a result, the toolholder supports quicker set-ups and less downtime for tool changes, delivering measurable gains in throughput for small-turning operations. Built for repeatable performance and simple integration The miniature clamping design focuses on straightforward integration into existing lathe tool arrangements: short mounting length, standard clamping thread and compact head dimensions facilitate rapid replacement of worn holders and compatibility with standard clamping fixtures. The result is less fixture rework and a shorter path from tool change to productive cutting. For workshops aiming to tighten process control and make the most of limited turret space, this holder is a rational choice that emphasises performance and longevity. Select the Teknik Makina Mini parting tool holder for compact, precise clamping and contact Metav Werkzeuge GmbH in Emmerich for expert advice and reliable supply — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: DC352TM Manufacturer: Teknik Makina Eclass: 21181005 Core dimensions Shank diameter: 10 mm Overall length: 88 mm Head diameter: 20 mm Thread: M6 Weight: 0.201 kg Features & application Miniature parting/clamping tool holder Designed for tight toolpost and turret use Secure threaded clamping for small cutting inserts FAQ What is the shank diameter of this holder? The shank diameter is 10 mm for the Teknik Makina Mini parting tool holder DC352TM, suitable for compact toolposts. Which thread is used for the clamping screw? Clamping is effected via an M6 thread on the DC352TM, providing reliable fixation for small cutters. Is this holder suitable for close-clearance operations? Yes, the short 88 mm overall length and compact head diameter make it suitable for close-clearance and confined lathe setups. How much does the holder weigh? The DC352TM has a nominal weight of 0.201 kg, helping to reduce toolpost inertia during high-speed or precise turning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Stechklemmhalter 2C ZT.D, S16Q Shaft, 35mm Cutting Height, 2mm Cut Width, Innenkühlung - Teknik Makina
Precise parting and dependable clamping come together with a compact 16 mm shank and a slim 2 mm cutting width, delivering stable parting performance and repeatable groove quality; order the parting clamp holder directly via Metav Werkzeuge or consult the team for technical clarification. Parting Clamp Holder K679TM — 16 mm shank, compatible with ZCC 2C ZT.D inserts by Teknik Makina The Parting Clamp Holder K679TM is a purpose-built parting tool holder for turning operations, designed for machines accepting a 16 mm shank and optimised for narrow parting and grooving tasks. 16 mm shank for standard toolholders 180 mm overall length for stable reach Compatible with ZCC 2C ZT.D inserts 2 mm cutting width for narrow parting cuts Engineered for stable, repeatable parting results The holder is engineered to provide a rigid mounting with a 16 mm shank and 180 mm overall length, which together reduce deflection during cut-off and grooving operations. A reduced cutting kerf of 2 mm means material waste is minimised while machine forces are kept lower, improving cycle consistency. The combination of compact mass and calculated geometry aids vibration damping and contributes to an even tool life, supporting continuous production where predictable results matter. Compatibility that reduces tooling complexity Designed to work with ZCC 2C ZT.D inserts, the clamp holder simplifies tool inventory and streamlines reorder processes by using a widely available insert format. The holder accepts a shank designated S16Q, aligning with common ISO shank standards and facilitating straightforward integration into existing turret setups. Clear compatibility reduces decision time when configuring turning stations and helps maintain uptime through easy replacement of consumables. Secure clamping and practical workshop handling The clamping design secures the cutting insert reliably for consistent cutting geometry and repeatable finish. The 35 mm cutting height and controlled insert placement ensure stable chip formation in parting operations, while the overall mass of 0.446 kg keeps the tool manageable during mounting and alignment. Where operators require quick set-up, the holder’s form factor and standard dimensions make alignment and repeatability easier on conventional lathes. Where this holder brings value on the shop floor Ideal for workshops that focus on efficient parting-off and grooving in serial turning, the holder supports narrow-section work and reduces cycle scrap through its 2 mm kerf capability and robust support. The compact design is suited to close-quarter machining where space is limited but rigidity remains essential. By pairing established insert systems with a standard shank and clear dimensional data, the holder helps purchasing and production planners make fast, low-risk tooling decisions. For specification checks or to secure supply of the Teknik Makina Parting Clamp Holder K679TM, contact Metav Werkzeuge for tailored procurement and advice from Emmerich’s precision specialists. Technical data Article number: K679TM Brand: Teknik Makina Type: Parting clamp holder Compatible inserts: ZCC 2C ZT.D Shank designation ISO: S16Q Core dimensions Shank diameter: 16 mm Overall length: 180 mm Diameter: 20 mm Cutting height: 35 mm Cutting width: 2 mm Weight: 0.446 kg Features and compatibility Suitable for parting and grooving applications Accepts ZCC 2C ZT.D insert types Shank format aligns with S16Q standard SKU: K679TM FAQ What shank size is required for this holder? The holder requires a 16 mm shank connection; the shank diameter is specified as 16 mm for the K679TM parting clamp holder. Which inserts fit this clamp holder? The clamp holder is compatible with ZCC 2C ZT.D inserts, offering a standard option for parting and grooving. What is the overall length and how does it affect stability? The overall length is 180 mm; this length provides a balance between reach and rigidity for stable parting operations. How wide is the cutting kerf achievable with this holder? The cutting width is 2 mm, enabling narrow parting cuts and reduced material loss. What is the weight of the tool and does it affect handling? The tool weighs 0.446 kg, keeping it light enough for easy handling while retaining sufficient mass for stable mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Stechklemmhalter 2°? 2020 2C-R DGN for 2C DGN Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of precise, space‑saving parting with a combination of 2 mm cutting width and a maximum 18 mm plunge depth for controlled material separation; the compact design and standard ISO 2020 seating ensure reliable clamping and reduced vibration in serial turning, while supply and advice are available directly from Metav Werkzeuge for a smooth procurement process. Parting clamp holder — 2 mm cutting width, right‑hand orientation by Teknik Makina The parting clamp holder is designed for precision parting and grooving on lathes, offering a narrow cut profile and robust clamping for repeatable separation operations 2 mm cutting width Max 18 mm plunge depth Compatible with 2C DGN inserts Right‑hand cutting orientation Consistent, economical parting for production workflows The compact toolholder achieves narrow kerfs with a 2 mm cutting width, which reduces material waste and minimises cycle times when parts are parted off. The 18 mm plunge depth provides a controlled maximum engagement, suitable for most light‑to‑medium turning tasks, and the right‑hand cutting geometry matches standard lathe setups for uninterrupted production. These measurable characteristics deliver a quantifiable improvement in throughput and repeatability for shops aiming to optimise scrap and machining time. Stable clamping and clear compatibility for fewer setup issues With a 20 mm clamping height and a 20 mm head width, the holder provides a firm seat for the insert and resists lateral movement during cut‑off operations. The seating is prepared for the ISO 2020 insert size and accepts the 2C DGN indexable plates, including those from ISCAR, simplifying tool sourcing and changeover. The overall length of 125 mm gives a balanced reach while the modest mass of 0.398 kg helps to limit centrifugal forces and chatter on light‑duty spindles. Practical use and application guidance for everyday turning This clamp holder is suited to routine parting, grooving and cut‑off tasks in small to medium workshops and industrial turning centres. The right‑hand orientation means the insert faces the workpiece in a conventional direction for most turning machines; pairing the holder with the recommended 2C DGN plates will ensure predictable chip formation and surface finish. For operators new to indexable parting inserts, the ISO designation identifies the correct insert geometry and thickness for safe, consistent mounting. Reliable supply and workshop support to keep production running Sourced from a specialist tooling supplier, the holder benefits from straightforward stock management and clear technical specifications, reducing the risk of incorrect ordering. Metav’s role as a European quality filter ensures that parts shipped from Emmerich meet inspection criteria before dispatch, supporting uninterrupted workshop operation. For bespoke tool lists or to confirm compatibility with a particular lathe setup, concise technical advice is available to assist specification decisions. For dependable parting performance choose the Teknik Makina parting clamp holder and contact Metav Werkzeuge for procurement and technical clarification via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: D754TM Manufacturer: Teknik Makina Product: Parting clamp holder Facts Cutting width: 2 mm Max plunge depth: 18 mm Overall length: 125 mm Clamping height: 20 mm Head width: 20 mm Holder width: 20 mm Weight: 0.398 kg Cutting direction: right Special features Compatible with 2C DGN inserts Suitable for ISCAR insert types ISO designation: 2020 Bore‑bar designation: 2C‑R DGN FAQ What insert type fits this holder? The holder accepts 2C DGN indexable inserts; the seating corresponds to ISO 2020 dimensions, ensuring compatibility with standard 2C DGN plates. Can this holder be used for left‑hand operations? This specific clamp holder is manufactured with a right‑hand cutting orientation and is intended for conventional right‑hand parting operations. Which manufacturers’ inserts are suitable? The toolholder is compatible with inserts from ISCAR and other suppliers offering 2C DGN plates that conform to the ISO 2020 specification. What is the maximum effective plunge depth? The holder provides a maximum plunge depth of 18 mm, which defines the safe engagement for parting cuts. Is the overall length suitable for small lathes? With an overall length of 125 mm and a modest weight, the holder is suitable for small to medium lathes where compact tool overhang is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Stechklemmhalter 3° 2020 3C GX24 for GX24 Wendeplatten Innenkühlung - Teknik Makina
Take advantage of the combination of compact dimensions and accurate clamping for reliable parting operations: the holder's 20 x 20 mm square shank and 3 mm cutting width deliver rigidity and clean separation with minimal chip interference. Order the parting clamping holder directly via Metav Werkzeuge or consult the technical advisors for compatibility and delivery. Parting clamping holder D866TM – 20 x 20 mm shank, 3 mm cutting width (Teknik Makina) The Parting clamping holder D866TM is a compact tool holder designed for precision parting and grooving tasks in turning applications, compatible with GX24 indexable inserts. 20 x 20 mm square shank 3 mm cutting width for narrow grooves Max parting depth 20 mm Compatible with Walter GX24 inserts Increased stability from a compact square shank The holder is built around a 20 x 20 mm square shank with an ISO 2020 designation, providing a rigid interface to standard tool posts and turrets. This compact format reduces overhang and improves torsional resistance, which translates into better surface finish and longer insert life when compared with longer, less rigid set-ups. The modest mass also makes tool changes straightforward while maintaining the clamping stability required for repeatable parting operations. Accurate parting with a narrow cutting width A 3 mm cutting width and a maximum parting depth of 20 mm enable precise separation on small-to-medium turned parts. The narrow kerf reduces material waste and lowers required cutting forces, which helps to limit vibration and heat build-up. For applications where close tolerances and minimal burrs are essential, this holder offers a concentrated capability that improves process reliability without the need for specialised equipment. Seamless integration with GX24 insert systems Designed for use with GX24 indexable inserts and noted as compatible with Walter insert geometries, the clamping system aligns with common industry standards to simplify procurement and inventory. The specification also references a compatible bar designation 3C GX24, which aids in matching the holder with existing boring bars and insert stocks. Integration into a proven insert family reduces tooling complexity and shortens set-up times. Ergonomic length and dependable handling With an overall length of 125 mm and a weight of 0.395 kg, the holder balances accessibility at the tool post with manageable handling during changeovers. The clamping design secures the insert firmly, promoting stable machining even at elevated feed rates appropriate for parting. The compact footprint supports close-fixture work and helps to maintain clearances on multi-tool turrets. For precise parting with Teknik Makina's D866TM, contact Metav Werkzeuge in Emmerich for product advice and reliable supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: D866TM Manufacturer: Teknik Makina Designation: Parting clamping holder Dimensions & weight Shank height: 20 mm Shank width: 20 mm Cutting-head width: 20 mm Cutting width: 3 mm Max parting depth: 20 mm Overall length: 125 mm Weight: 0.395 kg Compatibility & standards Compatible indexable inserts: GX24 Suitable insert manufacturer: Walter ISO designation: 2020 Boring bar designation: 3C GX24 FAQ What is the maximum parting depth for this holder? The holder supports a maximum parting depth of 20 mm as specified for the D866TM parting clamping holder. Which inserts fit this tool holder? This holder is compatible with GX24 indexable inserts and specifically noted as suitable for Walter GX24 styles. What are the shank dimensions and ISO designation? The shank measures 20 x 20 mm and corresponds to an ISO 2020 toolholder format. How long is the holder and how heavy is it? The overall length is 125 mm and the mass is approximately 0.395 kg, offering a compact and manageable tool geometry. Is this holder suitable for precision, small-diameter parting? Yes; the 3 mm cutting width and rigid 20 x 20 mm shank make it well suited to precise parting tasks on small to mid-sized components. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Stechklemmhalter 3°? 2020 3C-L MGM for 3C MGM Inserts Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a robust, left‑hand parting solution that combines precise clamping, compatibility with Korloy inserts and compact dimensions to keep changeover times low and production steady. Order the parting holder directly via Metav Werkzeuge or consult our specialists for application advice. Parting clamp holder D614TM by Teknik Cutting Tools — left‑hand cut, for 3C MGM inserts A left‑hand parting clamp holder designed for precise grooving and parting tasks with 3C MGM format inserts Left‑hand cutting orientation Compatible with 3C MGM insert format Shank dimensions 20 x 20 mm 125 mm overall length, 0.407 kg Optimised for reliable left‑hand parting performance The D614TM is a compact parting clamp holder engineered for consistent left‑hand cutting operations. Its clamping concept secures 3C MGM style inserts—common in a wide range of turning applications—so tool retention is stable even under intermittent loads. The holder’s geometry supports controlled chip formation and repeatable positioning, which reduces setup time and contributes to a steady production rate. By using a standard insert format, the toolholder helps streamline spare parts and insert sourcing. Clear specifications that aid planning and setup Critical dimensions are provided to support integration into existing tool posts and tool change routines: a 20 x 20 mm shank profile and 125 mm overall length provide a compact footprint while maintaining sufficient reach for most grooving tasks. The 3 mm cutting width defines the maximum slot size achievable with the fitted insert, and the 18 mm maximum parting depth indicates the maximal engagement of the parting blade before stability or interference becomes a concern. These measurable values assist process planners to determine clearances and machining strategies without guesswork. Compact handling and quick tool changes for efficient workflows Weighing just 0.407 kg, the holder remains easy to handle during tool set‑up and changeovers, while its clamping bar reference 3C‑L MGM ensures compatibility with matched tool bars or adaptors. A standard ISO 2020 designation simplifies the selection of replacement holders or spare parts across suppliers, which supports uninterrupted production and reduces inventory complexity. Stable clamping and defined interfaces contribute to reduced vibration and improved surface finish in many parting operations. Suited to workshop integration and supply confidence The holder is supplied for use with inserts from established manufacturers such as Korloy, enabling users to select grades and geometries appropriate for their material and finish requirements. As part of a broader offering from Metav Werkzeuge, the D614TM benefits from distribution and advisory support that helps workshops consolidate tool choices and maintain predictable supply chains. Choosing standardised tool interfaces helps reduce administrative overhead and fosters reliable machining outcomes. Contact Metav Werkzeuge for tailored application guidance and specify the Teknik Cutting Tools parting clamp holder D614TM to ensure the correct left‑hand solution for your turning operations Technical data Article number: D614TM Manufacturer: Teknik Makina eClass: 21181005 Facts Shank height: 20 mm Shank width: 20 mm Cutting width: 3 mm Max parting depth: 18 mm Overall length: 125 mm Weight: 0.407 kg Special features Compatible inserts: 3C MGM Suitable for inserts by Korloy ISO designation: 2020 Clamping bar designation: 3C‑L MGM Cutting direction: left FAQ What insert format does this holder accept? The holder is designed for the 3C MGM insert format and is compatible with inserts supplied by Korloy. What cutting direction is the D614TM built for? The D614TM is manufactured for left‑hand cutting operations and should be mounted accordingly on the turret. Which shank size is required for mounting? A 20 x 20 mm shank profile is specified for secure mounting in compatible tool posts. How deep can the parting blade engage? The holder supports a maximum parting or engagement depth of 18 mm, defined by the blade and holder geometry. Is the holder suitable for standardised tool setups? Yes. The holder carries an ISO 2020 designation and the clamping bar reference 3C‑L MGM, which aids interoperability with standard tool systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Stechklemmhalter 3°? 2020 3C-R S224 For Horn Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the combination of precise 3 mm cutting width and 18 mm maximum cutting depth to achieve consistent grooving and parting results, while the compact 20 x 20 mm shank and 125 mm overall length simplify setup and storage; order the tool through Metav Werkzeuge or consult the Metav team for application advice. Grooving clamp holder — 3 mm cutting width, 18 mm max depth (Teknik Makina) A grooving clamp holder engineered for right-hand parting and grooving applications on lathes, designed to accept ISO 2020 indexable inserts from Horn for secure, repeatable cutting. 3 mm cutting width for fine grooves Max 18 mm cutting depth Right-hand holder, ISO 2020 insert fit 20 x 20 mm shank, 125 mm overall length Precision and reliable cutting for turn-milling tasks This compact toolholder is designed to deliver predictable performance where tight tolerances matter. With a defined 3 mm cutting width and 18 mm maximum cutting depth, the holder enables controlled material removal for narrow grooves and parting operations. The right-hand cutting orientation and the ISO 2020 insert interface provide a standardised solution that integrates with established insert families, reducing the need for custom tooling. Engineers benefit from a predictable cutting geometry that supports process planning and repeatability, while production managers gain a tool that helps reduce scrap and rework in repetitive turning tasks. Secure clamping and compact design for stable machining Clamping stability is essential for groove accuracy; the holder’s 20 x 20 mm shank and robust clamp arrangement deliver the rigidity required for consistent chip formation. At an overall length of 125 mm and a mass of 0.407 kg, the design balances reach with vibration control, improving surface finish and tool life. Compatibility with Horn insert geometries (ISO 2020) simplifies insert procurement and replacement, enabling quick changeovers and minimal downtime. The compact profile also makes integration straightforward on small to mid-sized lathes where space and clearance are constrained. Practical benefits for workshop efficiency and setup Adoption of a standardised clamp holder streamlines set-up and inventory. The use of common ISO inserts and a right-hand cutting direction reduces the variety of spares needed, and the repeatable clamp mechanism shortens changeover times. For workshops focused on throughput, the holder’s measured dimensions and familiar insert interface support reproducible set-ups and fewer interventions at the machine. Additionally, the clear numerical specifications—3 mm width, 18 mm depth, 20 x 20 mm shank—allow straightforward programming of process parameters and easier documentation for quality records. Compatibility, mounting and recommended applications The holder is specified to work with the tool shank designation 3C-R S224, ensuring mechanical match to common boring-bar adaptors and tool posts. Its ISO 2020 insert seat accepts a variety of Horn-part inserts suitable for grooving and parting operations, enabling selection of chipbreaker and grade according to the workpiece material and cutting conditions. The compact geometry and right-hand orientation make the holder particularly suitable for fine grooving, narrow-slot cutting and controlled parting-off where a narrow kerf is required. For reliable grooving operations from a trusted precision partner, contact Metav Werkzeuge for tailored advice and swift supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: D704TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Cutting direction: right Cutting width: 3 mm Max cutting depth: 18 mm Shank height: 20 mm Cutting head width: 20 mm Holder width: 20 mm Overall length: 125 mm Weight: 0.407 kg Compatible insert manufacturer: Horn ISO insert designation: 2020 Mounting/bores bar designation: 3C-R S224 Facts Cutting width: 3 mm Maximum cutting depth: 18 mm Shank size: 20 x 20 mm Overall length: 125 mm Weight: 0.407 kg Special features Right-hand cutting orientation ISO 2020 insert interface Compatible with Horn indexable inserts Compact 125 mm overall length Design optimised for grooving and parting FAQ What insert size does the holder accept? The grooving clamp holder accepts ISO 2020 indexable inserts; compatible inserts from Horn are recommended for correct seat fit and secure clamping. What is the maximum cutting depth for this tool? The holder is specified for a maximum cutting depth of 18 mm, enabling deeper grooving where required while maintaining stability. Which shank dimensions should the toolpost support? The tool requires a 20 x 20 mm shank seat and the overall length is 125 mm; ensure the toolpost or adaptor accommodates these dimensions. Is the holder suitable for left-hand cutting applications? This specific model is configured for right-hand cutting; for left-hand operations a corresponding left-hand variant should be selected. How does the holder improve set-up times? Standardised ISO 2020 inserts and a compact clamp design reduce insert variety and permit faster replacements, helping to shorten machine downtime and set-up cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Stechklemmhalter 4mm Cutting Width, 18mm Max Stech Depth, 125mm Overall Length, 4C MGM For Insert, Innenkühlung, Right-Hand Cutting - Teknik Makina
Take advantage of a compact, right-hand parting and grooving solution that combines secure clamping, Korloy insert compatibility and a 4 mm cutting width for consistent production results — order via Metav Werkzeuge or ask their consultants for application support. Parting tool holder D676TM – right-hand grooving holder with 4 mm cutting width A compact parting tool holder D676TM designed for right-hand turning operations; suited to standard lathe setups and compatible with Korloy 4C MGM inserts for efficient parting and narrow-groove work Right-hand cutting direction 4 mm cutting width for narrow grooves Compatible with Korloy 4C MGM inserts 20 mm cutting-head width for stable support Stable clamping for precise grooving A robust clamping concept delivers stable clamping and repeatable results in parting and grooving tasks. The 20 mm cutting-head width and ISO 2020 shank format translate into reduced chatter and improved surface finish, which benefits cycle-time consistency on serial production runs. Built with a compact 125 mm overall length and a weight of 0.408 kg, the design keeps the centre of mass close to the toolpost, lowering dynamic loads on the lathe and helping maintain tool life and insert integrity during high-frequency operations. Reduced tooling complexity through insert compatibility Compatibility with Korloy 4C MGM inserts simplifies tooling management and cuts down on spare-part variety. The holder’s 4 mm cutting width is aimed at narrow groove and parting operations where precise chip control matters; using a standard insert family means faster changeovers and predictable cutting performance. For production environments that place a premium on uptime, the ability to accept widely available inserts reduces procurement overhead and shortens maintenance intervals. Designed for efficient, right-hand machining on modern lathes The holder supports a right-hand cutting direction and offers a maximum grooving depth of 18 mm, allowing confident engagement in routine to moderately deep parting tasks. The 125 mm overall length provides good reach without excessive overhang, while the unit’s modest mass contributes to low vibration transmission. Together these attributes help deliver consistent chip breakage and smoother operation on CNC and conventional lathes, improving throughput and lowering rejects in repetitive workflows. Contact Metav Werkzeuge for tailored advice on the D676TM parting tool holder and to secure reliable supply — Metav Werkzeuge can advise on inserts, toolpost setup and compatibility; eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical Data Article number: D676TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Facts Weight: 0.408 kg Overall length: 125 mm Cutting-head width: 20 mm Cutting width: 4 mm Maximum grooving depth: 18 mm Cutting direction: right Special features ISO shank designation: 2020 Compatible inserts: 4C MGM Compatible insert manufacturer: Korloy Shank/holder designation: 4C-R MGM Compact design for reduced overhang FAQ Which inserts fit this holder? The D676TM accepts Korloy 4C MGM inserts; the compatibility enables straightforward replacement with standard Korloy parting/grooving plates. Is the holder for right- or left-hand cutting? This grooving holder is configured for right-hand cutting, matching the specified cutting-direction parameter for typical lathe setups. What is the maximum grooving depth? The maximum stech (grooving) depth for the D676TM is 18 mm, enabling confident engagement for many parting and grooving tasks. What are the key dimensions to check for toolpost mounting? Important mounting references are the ISO 2020 shank format and the 125 mm overall length; these determine clearance and overhang for the toolpost. Can the holder be used for repeated production runs? Yes — the holder’s stable clamping and compatibility with standard Korloy inserts support repeatable performance suitable for serial production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Grooving Clamp Holder for MGM 200 Indexable Inserts 35mm Cutting Height, Left, 12.5mm Head Width - Teknik Makina
Secure precise, repeatable parting and grooving with a clamp-style holder engineered for MGM 200 indexable inserts; the compact 21 mm profile and S16Q shank deliver stability and accessibility in confined setups. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Stechklemmhalter – Parting clamp holder for MGM 200, 21 mm, L180 mm (Teknik Makina) The Stechklemmhalter is a clamp-style parting holder designed for left-hand grooving and parting with MGM 200 indexable inserts, combining a compact 21 mm diameter with a standard S16Q shank for straightforward integration into 16 mm toolposts. Clamp-style holder for secure insert retention 21 mm outer diameter for compact setups S16Q shank for standard 16 mm toolposts Left-hand cutting for controlled parting operations Improve cycle consistency with secure clamping and insert compatibility The holder focuses on clamping integrity and predictable cutting performance. Compatible with MGM 200 indexable inserts and widely matched to Korloy grades, the clamping arrangement ensures stable seating of the insert and reduces vibration during parting cuts. The design accommodates a 2 mm cutting-edge width, which helps maintain a clean shear plane and reduces burr formation; the result is a shorter rework time and higher first-pass yield. For production environments aiming to raise throughput, this combination of precise seating and insert compatibility supports reliable cycle times and lowers scrap rates. Compact geometry and toolpost fit for improved access and rigidity A slim 21 mm outer profile and the S16Q shank make the toolholder suitable for operations where access is limited without sacrificing stiffness. The 180 mm overall length provides reach while the modest mass contributes to reduced spindle load; the assembly suits small to medium turning centres and toolposts accepting 16 mm shanks. The left-hand cutting orientation allows controlled parting from the operator’s preferred setup, and the compatibility with Korloy manufacturers’ MGM 200 inserts widens the choice of cutting grades for different workpiece materials. This geometry supports secure mounting and minimal deflection, particularly important when working with demanding alloys. Practical fastening and geometry for quick set-up and repeatable results Assembly and adjustment rely on proven hardware: a M5x12 clamping screw and a 4 mm Allen key for secure tightening, plus a clamping head width of 12.5 mm that centres the insert reliably. The toolholder provides a cutting height of 35 mm and a maximum grooving depth of 5 mm, making it suitable for many standard parting and groove profiles. These measurable parameters simplify process planning and make tool selection more predictable. For shops seeking predictable handling and straightforward maintenance, the combination of common fastening sizes and defined cutting limits supports fast changeovers and consistent set-up across shifts. Contact Metav Werkzeuge for tailored application advice on Teknik Makina toolholders and immediate supply from our Emmerich warehouse Technical data SKU: K897TM Label: 21mm Stechklemmhalter MGM 200 L180mm Product type: Stechklemmhalter For inserts: MGM 200 Compatible insert manufacturer: Korloy Manufacturer: Teknik Makina Facts Diameter: 21 mm Shank diameter: 16 mm Overall length: 180 mm Weight: 0.288 kg Cutting height: 35 mm Clamping head width: 12.5 mm Max grooving depth: 5 mm Cutting-edge width: 2 mm Clamping screw: M5x12 Allen key: 4 mm Cutting direction: left ECLASS: 21181005 Special features Toolholder designation: S16Q Clamp-style parting holder Compatible with MGM 200 indexable inserts Compatible with Korloy insert grades Left-hand cutting orientation Designed for parting and grooving operations M5x12 clamping screw and 4 mm Allen key specified FAQ What insert type is required for this holder? The holder is built for MGM 200 indexable inserts; Korloy-compatible MGM 200 grades are suitable for most parting and grooving tasks with this toolholder. Which shank size fits standard toolposts? The toolholder uses an S16Q designation with a 16 mm shank diameter, matching toolposts and holders designed for 16 mm tooling. What is the maximum grooving depth achievable? The holder supports a maximum grooving (stepping) depth of 5 mm, suitable for common parting profiles and narrow grooves. Are fastening tools and screws specified? Yes, the design specifies a M5x12 clamping screw and a 4 mm Allen key for secure insert clamping and straightforward tightening. Can the holder be used for right-hand operations? This version is configured for left-hand cutting; for right-hand operations, choose a corresponding holder designed for right-hand cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm Mini Clamping Tool Holder M6 Thread 88mm Length, 5mm Shank - Teknik Makina
Combining compact dimensions with a secure M6 clamping screw and a 5 mm tool bore, this mini parting clamp holder delivers stable fixation in tight lathe setups; its 22 mm body and 88 mm overall length simplify integration into narrow toolposts. Order the holder via Metav Werkzeuge or consult our specialists for application advice. Mini parting clamp holder DC328TM by Teknik Makina — 22 mm body, M6 clamping screw A compact Mini parting clamp holder designed for secure clamping of parting and profiling tools in confined lathe operations. Compact 22 mm body for tight toolposts M6 clamping screw for secure fixation 88 mm overall length for confined setups Lightweight at 0.274 kg for easy handling Stable clamping for precise parting cuts The holder provides a rigid clamping arrangement that reduces vibration during parting operations. With a dedicated M6 clamping screw and a centred 5 mm tool bore, the design ensures consistent contact pressure and predictable tool behaviour. Reduced micro-movement leads to more repeatable part-off faces and fewer rework cycles. The construction is aimed at users seeking reliable performance when working with slender parting blades or profiling inserts in small to medium lathes. Compact footprint for cramped toolposts and tight centres A small toolholder body with a 22 mm diameter and 88 mm overall length allows installation where larger holders will not fit. The compact geometry supports installations close to chuck faces and in multi-tool turrets, reducing overhang and improving rigidity. Shorter overhangs directly influence deflection and surface finish, so the compact format supports higher cutting stability and easier setup in confined workspaces, contributing to time savings during tool changes. Simple integration, lightweight handling and workshop efficiency Weighing just 0.274 kg, the holder is easy to handle during setup and changeover, reducing strain during repetitive operations. The straightforward clamp interface is compatible with common parting blades and is designed for quick alignment. By combining compact dimensions with a conventional clamping thread, the product streamlines retrofitting into existing toolposts without complex adapters. Specification clarity and predictable mounting characteristics result in shorter downtime and improved process reliability. Contact Metav Werkzeuge in Emmerich for bespoke advice on the Teknik Makina Mini parting clamp holder DC328TM — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss fitment and workshop applications Technical data Article number: DC328TM Manufacturer: Teknik Makina Product name: Mini parting clamp holder Dimensions / weight Diameter: 22 mm Overall length: 88 mm Shank bore: 5 mm Thread: M6 Weight: 0.274 kg Features Compact toolholder design Intended for parting/turning toolholding Lightweight, easy to change FAQ What shank size does the holder accept? The holder accepts a 5 mm tool shank; this is shown by the specified 5 mm shank bore for the Teknik Makina mini parting clamp holder (SKU DC328TM). What are the key dimensions for installation? The body diameter is 22 mm and the overall length is 88 mm, providing a compact footprint suitable for narrow toolposts and confined lathe setups. Which thread is used for the clamping screw? Clamping is secured via an M6 thread, providing standardised fixation compatible with common clamping screws. Is the holder suitable for frequent tool changes? Yes; at 0.274 kg the holder is lightweight and designed for straightforward handling and quick changeovers in production or workshop environments. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Mini Solid Clamp Holder D22 d10 L88, Compact Steady Design - Teknik Makina
Take advantage of the compact 22 mm shank and short L88 mm overall length to improve rigidity and access in confined turning operations; the combination of compact design and reliable clamping contributes to steadier cuts and fewer set-ups. Order the Mini parting toolholder directly via Metav Werkzeuge or consult our technical team for application advice. Mini parting toolholder D22 d10 L88 by Teknik Makina — compact 22 mm shank, 88 mm overall length The Mini parting toolholder D22 d10 L88 is a compact clamping solution for precision parting and grooving on lathes, designed for tight setups and improved tool rigidity 22 mm shank diameter Compact L88 overall length Stable clamping for parting tasks Reduced overhang for improved accuracy Improved stability and access for tight turning operations The compact 22 mm shank combined with an L88 overall length reduces tool overhang, which improves stiffness and diminishes chatter during parting operations. For workshops facing limited clearance, this short footprint provides better access to confined work zones while maintaining a secure clamp. The design focuses on mechanical stability rather than added complexity, so the result is a simpler tool arrangement that supports consistent cut quality and predictable tool life. Streamlined workshop use and inventory management With a concise form factor and clearly defined dimensions, the DC354TM simplifies tool planning and storage. The small toolholder helps to reduce machine set‑up time by offering predictable positioning and repeatable clamping characteristics, which supports faster changeovers and steadier process control. The compact design also assists in standardising tooling kits for small‑batch production or multi‑operation turning cells, improving overall shopfloor efficiency. Trusted supply and practical support through Metav Sourced from Teknik Makina, this mini clamping solution benefits from reliable manufacturing and practical application focus. Purchasing via Metav provides the added value of a European quality filter and dependable logistics from Emmerich, backed by decades of metrology and tooling experience. The partnership ensures consistent availability and a professional procurement route for workshops and industrial buyers seeking compact, performance‑oriented clamping tools. Discuss the DC354TM with Metav Werkzeuge for tailored procurement and technical advice from our Emmerich team, ensuring the right mini parting toolholder for your lathe setups. Technical Data SKU: DC354TM Label: 22mm Mini-Stechklemmhalter L88mm Name: Mini parting toolholder D22 d10 L88 Manufacturer: Teknik Makina Facts Diameter: 22 mm Overall length: 88 mm ECLASS: 21181005 UID: DC354TM Special features Mini design for confined spaces Clamping function for parting/grooving Short overhang for improved rigidity FAQ What is the shank diameter of this toolholder? The shank diameter is 22 mm, as specified for the DC354TM mini toolholder. What is the overall length of the holder? The overall length is 88 mm, giving a compact L88 footprint for tight setups. Which applications is the holder intended for? The holder is intended for parting and grooving operations on lathes, offering a compact clamping solution for these turning tasks. Who manufactures this mini parting toolholder? The toolholder is produced by Teknik Makina and is available under the SKU DC354TM. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm Mini Square Shank Toolholder D06 L88, Precision Clamping - Teknik Makina
The compact design and short overhang of this tool deliver steady clamping and improved accessibility in confined turning setups. With a 22 mm shank and 88 mm overall length, the holder reduces vibration and supports accurate grooving cycles. Order the component directly via Metav Werkzeuge or request advice from their consultants for fast integration into production. Mini grooving clamp holder D22 d06 L88 (Teknik Makina) The mini grooving clamp holder provides compact, precise clamping for grooving and parting operations on lathes and CNC turning centres. Compact grooving holder, ideal for tight toolpaths 22 mm shank diameter for slim tool posts 88 mm overall length to reduce overhang SKU DC336TM by Teknik Makina Precision clamping in confined toolrooms The compact grooving clamp holder concentrates stiffness where it matters. Thanks to the 22 mm shank and an 88 mm overall length, the design reduces cantilever effects and lateral vibration during narrow-groove cuts. This results in improved surface finishes and longer insert life compared with oversized holders. For shops handling small-diameter workpieces, the reduced profile facilitates close-positioned tooling and safer turret clearance. Faster set-up and consistent process outcomes A short, predictable tool geometry simplifies tool offsets and repeatable set-up. The holder’s compact form supports rapid indexing and consistent radial engagement with the insert—key factors for repeatable grooving cycles. With the DC336TM label for quick identification, toolroom organisation is simplified and changeover times are lowered, supporting leaner machining sequences and higher spindle utilisation. Integration into standard turning workflows Designed for conventional and CNC lathes, the small form factor allows installation on slim tool posts and low-profile tool blocks. The item is optimised for grooving and parting applications where minimal overhang is required; the reduced mass near the cutting edge benefits high-precision turning tasks. The straightforward geometry also eases measurement and inspection steps during process validation. Practical benefits for workshops and production lines Adopting a compact grooving clamp holder helps protect inserts and reduces scrap rates by stabilising the cutting zone. The holder’s labelled SKU and concise dimensions support predictable tool lists and faster procurement. For maintenance cycles and inventory management, the clear designation and compact footprint make storage and rotation simpler in both small workshops and larger production environments. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Teknik Makina DC336TM into existing turning setups and to secure reliable supply from our European warehouse Technical Data SKU: DC336TM Product: Mini grooving clamp holder Manufacturer: Teknik Makina Eclass: 21181005 Dimensions & Core Data Shank diameter: 22 mm Overall length: 88 mm Designation: D22 d06 L88 Labels & Identification Short label: 22mm Mini-Stechklemmhalter L88mm Product type: Mini-Stechklemmhalter FAQ Which machines is this holder compatible with? The holder is suitable for conventional lathes and CNC turning centres that accommodate a 22 mm shank; the Teknik Makina DC336TM is intended for low-profile tool posts and compact turret stations. What are the exact shank and length dimensions? Shank diameter is 22 mm and overall length is 88 mm for the DC336TM mini grooving clamp holder, matching slim toolpost configurations. Which turning tasks are best suited to this holder? The design is aimed at grooving and parting operations where reduced overhang and stable clamping improve surface finish and insert life. How does the compact profile benefit workshop efficiency? A shorter overhang reduces vibration and improves repeatability, which lowers scrap rates and shortens set-up and changeover times in batch and single-piece production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
23mm Stechklemmhalter KGMN KGEVR-KGMN 200 For Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from a compact clamp holder that pairs a 2 mm cutting width with a 35 mm cutting height on a rigid 16 mm shank for accurate parting and grooving. Compatibility with Korloy KGEVR‑KGMN 200 inserts ensures straightforward insert selection and reliable cutting performance. Order directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Parting and Grooving Clamp Holder K660TM — 2 mm cutting width, 16 mm shank (Teknik Makina) A robust Parting and Grooving Clamp Holder K660TM engineered for precision parting operations and grooving tasks in compact turning centres, optimised for Korloy KGEVR‑KGMN 200 inserts. Secure clamp for KGEVR-KGMN 200 inserts 2 mm precise cutting width 16 mm shank for compact lathes 125 mm overall length for stability Consistent parting through defined cutting geometry A toolholder designed for repeatable parting and grooving delivers measurable gains in process stability. The 2 mm cutting width combined with a 35 mm cutting height provides a narrow, controlled cut that reduces vibration and chop‑off variation; this results in improved surface finish and fewer secondary operations. For workshops unfamiliar with the terminology: parting/grooving holders secure a replaceable insert at a fixed height and angle so that each cut is consistent cycle after cycle. The controlled geometry of the clamp supports shorter cycle times and predictable tool life. Compact profile improves rigidity and access in tight setups Rigidity is essential for accurate turning; the compact 16 mm shank with ISO designation S16K 2C reduces overhang and increases stiffness in light to medium duty machines. With an overall length of 125 mm and a head diameter of 23 mm, the holder fits constrained toolposts while maintaining clearance for workpiece operations. The low mass of 0.22 kg contributes to reduced tool inertia, helping to prevent chatter during short, decisive cuts. These dimensional characteristics make the holder particularly suitable for small lathes and for setups where tool zonal space and repeatability are priorities. Fast insert handling and broad industrial compatibility Clamping is executed in the KGMN style and is specified to accept Korloy KGEVR‑KGMN 200 inserts, enabling quick insert changes and simple stock management. Compatibility with a widely used insert family helps standardise tooling across machines and reduces the need for diverse spare‑part inventories. For production and maintenance planners, the combination of standardised insert form and robust clamp function supports predictable uptime and lower process variation. The design focusses on pragmatic workshop realities: straightforward assembly, proven geometries and industrial compatibility rather than unnecessary complexity. Contact Metav Werkzeuge today to discuss how the Teknik Makina K660TM parting and grooving clamp holder can be integrated into production workflows — email info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and procurement. Technical data Article number: K660TM Brand: Teknik Makina Tool type: Parting and grooving clamp holder Facts Shank diameter: 16 mm Cutting height: 35 mm Cutting width: 2 mm Overall length: 125 mm Diameter: 23 mm Weight: 0.22 kg Compatibility & features Compatible inserts: KGEVR-KGMN 200 Compatible insert manufacturer: Korloy Shank standard: S16K 2C Clamping designation: KGMN FAQ Which inserts fit this clamp holder? The clamp holder accepts Korloy KGEVR‑KGMN 200 inserts; the KGMN clamping style is specified for secure seating and easy replacement. What is the shank size and standard for mounting? The toolholder uses a 16 mm shank with ISO designation S16K 2C, suitable for toolposts designed for metric shanks. Is the holder suitable for small lathes and limited toolpost space? Yes, the compact 125 mm overall length and 23 mm head diameter make it appropriate for confined setups where rigidity and clearance are required. How does the narrow 2 mm cutting width affect performance? A 2 mm cutting width concentrates cutting forces and reduces chip load per revolution, delivering cleaner parting cuts and less tendency for vibration in most turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Grooving Clamp Holder KGEVR-KGMN 2mm Cut Width, S20M 2C Shaft - Teknik Makina
Benefit from the K661TM's combination of a 20 mm shank and a narrow 2 mm cutting width for precise, low-vibration grooving; the 150 mm overall length provides the stability required for repeatable parting operations. Order the clamp holder through Metav Werkzeuge or consult the specialists for application advice. Parting and Grooving Clamp Holder K661TM — 20 mm shank, 150 mm overall length (Teknik Makina) The Parting and Grooving Clamp Holder K661TM is a compact toolholder designed for precision turning tasks, especially narrow grooving and parting-off operations on conventional and CNC lathes 20 mm shank diameter for standard toolposts 150 mm overall length for stable reach 2 mm cutting width for narrow grooving Compatible with Korloy KGEVR‑KGMN 200 inserts Accurate clamping for consistent parting results The K661TM is built to deliver consistent clamping and repeatable results in production and workshop settings. With a 20 mm shank, the toolholder seats securely in a standard toolpost, reducing micro‑movement during cuts. Compatibility with Korloy KGEVR‑KGMN 200 indexable inserts keeps changeover rapid and predictable, lowering machine downtime. The combination of a short, rigid shank and secure insert mounting translates directly into cleaner grooves and fewer rejects in batch production. Optimised for narrow grooves and fine finishing A 2 mm cutting width and a 45 mm cutting height make this holder particularly effective when machining narrow slots or performing fine parting tasks where material waste must be minimised. The slim cutting geometry helps to control chip formation and reduces the need for excessive machine power, while the holder's rigidity supports a stable cutting environment. For users shifting between roughing and finishing passes, the holder permits quick insert swaps without altering set‑up, saving both time and tool costs. Engineered dimensions for workshop reliability At 150 mm overall length and a modest weight of 0.374 kg, the toolholder balances reach with vibration control — a crucial factor when achieving tight tolerances. The specified 25 mm diameter section and the standard shank designation contribute to predictable tool behaviour across different lathes. This predictability simplifies process planning: the holder can be integrated into existing fixtures with minimal offset adjustments, which is advantageous for small-series manufacturing and maintenance workshops alike. Practical setup and compatibility notes The holder carries the shank designation S20M 2C and relates to the KGMN toolholder family, making it straightforward to match with compatible mounting systems and insert types. The K661TM accepts the listed KGEVR‑KGMN 200 inserts from Korloy, allowing teams to use widely available indexable tips rather than bespoke brazed tools. This interoperability supports stock rationalisation and reduces procurement complexity. Basic set‑up requires correct seating of the insert and torqueing of the clamp screw to the machine maker's specifications to ensure optimal performance. For precision parting and grooving with the Teknik Makina K661TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for stock information and tailored application advice Technical data SKU: K661TM Manufacturer: Teknik Makina Item: Parting and grooving clamp holder Compatible inserts: KGEVR‑KGMN 200 (Korloy) Facts Shank diameter: 20 mm Overall length: 150 mm Cutting height: 45 mm Cutting width: 2 mm Diameter: 25 Weight: 0.374 kg Special features Shank designation: S20M 2C Toolholder designation: KGMN Compatible with Korloy inserts KGEVR‑KGMN 200 FAQ Which inserts are compatible with this holder? The holder accepts Korloy KGEVR‑KGMN 200 indexable inserts; the K661TM is configured for this insert form to ensure secure seating and reliable cutting performance. What shank and mounting designation does it use? The toolholder uses a 20 mm shank and the shank designation S20M 2C, aligned with the KGMN family for straightforward mounting in standard toolposts. Is the toolholder suitable for narrow grooving operations? Yes — with a 2 mm cutting width and rigid clamp design, the holder is intended for narrow groove machining and precise parting tasks. Can the holder be used for both roughing and finishing? The design facilitates quick insert changes, allowing different insert grades for roughing and finishing without major re‑set‑up of the K661TM. What are the main dimensional advantages for workshop use? The 150 mm overall length and compact weight offer a balance of reach and stiffness, reducing vibration and supporting consistent tolerance control in small‑series and production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Stech Toolholder 3mm Cutting Width, S20Q Shaft, 3C for Indexable Inserts, Internal Coolant, Right-Hand Cutting - Teknik Makina
Take advantage of secure clamping for ISCAR 3C inserts, a 20 mm shank for rigid mounting and a 180 mm overall length for extended reach — all combined to deliver consistent parting and grooving performance. Order the tool directly via Metav Werkzeuge or contact our consultants for application guidance. Grooving clamping holder K672TM — 20 mm shank, 180 mm overall length (Teknik Makina) The Grooving clamping holder K672TM is a parting and grooving holder designed for turning operations, offering compatibility with ISCAR 3C inserts and an ISO S20Q shank designation for reliable workshop integration 20 mm shank diameter for stable mounting 180 mm overall length for deep reach Compatible with ISCAR 3C inserts 3 mm cutting width, 35 mm blade height Consistent grooves through secure clamping and geometry The holder is engineered to provide secure clamping of ISO-style inserts, reducing micro-movement that can distort groove dimensions. With a 20 mm shank and a firm interface to ISO S20Q toolposts, the arrangement improves repeatability across batches and reduces rework. The specified 3 mm cutting width and 35 mm cutting height define the controlled cut profile and are suitable for standard parting and narrow-grooving operations, helping to maintain tolerance stacks and surface finish in serial production. Faster set-up and reliable tool changes for higher throughput A clear ISO designation and the alternate holder code 3C‑R DGN enable rapid identification and quicker tool changes at the machine, shortening non-productive time. The 180 mm overall length allows access into deeper work while the moderate mass (0.446 kg) keeps spindle load predictable, which supports steady cutting conditions. For production shops and maintenance teams, this translates into more predictable cycle times and simpler inventory management when matching holders to ISCAR 3C inserts. Robust compatibility across conventional turning tasks The design supports common grooving and parting applications on lathes and turning centres that accept ISO S20Q shanks, making the holder versatile for general workshop use. Compatibility with widely used 3C insert geometries ensures broad tooling availability and reduces the need for multiple specialised holders. The combination of standardised interfaces and straightforward geometry helps technicians achieve consistent cut quality with familiar insert styles. Contact Metav Werkzeuge today for tailored advice and procurement of the Teknik Cutting Tools grooving clamping holder K672TM — our Emmerich hub provides fast processing and application support. Technical data SKU: K672TM Manufacturer: Teknik Makina eClass: 21181005 Core data Shank diameter: 20 mm Overall length: 180 mm Cutting height: 35 mm Cutting width: 3 mm Diameter: 25 mm Weight: 0.446 kg Special features Compatible insert manufacturer: ISCAR Insert type: 3C ISO shank designation: S20Q Alternate holder designation: 3C-R DGN FAQ Which insert type is compatible with this holder? The holder accepts 3C insert formats and is supplied to work with ISCAR 3C geometries in parting and grooving tasks. What shank standard and diameter does the holder use? The tool has an ISO S20Q shank designation and a 20 mm shank diameter for secure mounting in standard toolposts. What are the cutting width and cutting height specifications? The holder provides a 3 mm cutting width and a 35 mm cutting height for controlled narrow-grooving and parting operations. Is the holder suitable for deeper grooving operations? With an 180 mm overall length the holder offers extended reach for deeper grooves while maintaining a compact mass of 0.446 kg for predictable dynamics. What machine types is this holder intended for? It is intended for lathes and CNC turning centres that accept ISO S20Q shanks and standard insert-style grooving tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Stechklemmhalter 4mm Cut Width, Suitable for MGM 4 Inserts, 50-60 Ø Bar Holder 2525, Right-Cutting, Internal Cooling?, - Teknik Makina
Take advantage of a stable, workshop-ready solution that combines a compact 25 mm cutting head with secure insert clamping and a Ø50 mm shank for improved rigidity; the result is reliable right-hand grooving and parting with fast setup and low vibration. Order via Metav Werkzeuge or consult our specialists for application advice and rapid supply. Stechklemmhalter – Grooving tool holder, right-hand, Ø50×150 mm (Teknik Makina) Stechklemmhalter is a purpose-built grooving and parting clamp holder for lathe operations, optimised for right-hand cutting and compatible with Korloy MGM 4 indexable inserts. Right-hand cutting for clean parting Compatible with Korloy MGM 4 inserts 25 mm cutting head for secure support Ø50 mm shank, 150 mm overall length Consistent parting and grooving for productive turning The holder delivers predictable results thanks to a rigid Ø50 mm shank and a 150 mm overall length, which reduce deflection during cut-off and narrow-grooving tasks. The comparatively compact geometry concentrates stiffness at the tool centre, improving surface finish and minimising chatter when using MGM 4 indexable inserts. For machinists seeking steady repeatability, the design offers a balance between accessibility to the workpiece and the support needed for stable metal removal. Fast setup and reliable insert clamping to save machine time Fitted for Korloy-compatible MGM 4 inserts, the clamping system simplifies tool changes and secures cutting edges with repeatable seating. The ISO 2525 designation and supplied bar reference 4C-R (50-60) make it straightforward to confirm compatibility with existing tool posts and boring bars. Quick insert replacement reduces downtime, while the positive clamping eliminates micro-movements that can cause premature edge wear—an advantage for batch production and mixed-series work. Optimised geometry for narrow grooves and controlled chip evacuation A 25 mm cutting head width and a 4 mm cutting width at the insert provide the profile required for tight-groove machining and precision parting. The tool accepts a maximum effective cutting diameter of 60 mm and allows a maximum grooving depth of 20 mm, enabling a range of internal and external operations without overextending the tool. The measured 45 mm cutting height and a 25 mm cutting engagement length support correct insert positioning and consistent chip formation, which helps maintain tool life and process stability. Workshop-grade build for everyday robustness Weighing approximately 0.704 kg, the holder is light enough for easy handling yet substantial enough to dampen vibration at the cutting zone. The construction suits general workshop demands where durability and straightforward maintenance are priorities. The part’s compatibility with widely available Korloy inserts supports a cost-effective consumable strategy, while the design reduces the need for frequent readjustment—benefits that translate into higher throughput on the shop floor. Contact Metav Werkzeuge for tailored application guidance and prompt supply from Emmerich — info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: D786TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Facts Shank diameter: 50 mm Overall length: 150 mm Cutting head width: 25 mm Insert cutting width: 4 mm Maximum grooving depth: 20 mm Maximum cutting diameter: 60 mm Cutting height: 45 mm Cutting engagement length (shaft): 25 mm Weight: 0.704 kg Cutting direction: right-hand Special features Compatible with Korloy MGM 4 indexable inserts ISO designation: 2525 Clamping bar reference: 4C-R (50-60) Designed for grooving and parting applications FAQ Which insert type fits this holder? The holder accepts MGM 4 indexable inserts; it is compatible with Korloy MGM 4 geometries and insert seatings for secure clamping. Is the tool suitable for internal grooving as well as external parting? Yes, the grooving clamp holder is designed for both narrow internal grooves and external parting operations within its maximum grooving depth of 20 mm. What are the key dimensions to check for lathe compatibility? Check the Ø50 mm shank and 150 mm overall length, along with the ISO 2525 interface and the 4 mm insert cutting width for correct alignment with the tool post. Does the tool support left-hand cutting? This model is configured for right-hand cutting; mirror or left-hand variants should be selected where that cutting direction is required. How does the clamping design affect repeatability? The positive clamping and ISO-compliant seating provide repeatable insert positioning, reducing setup time and ensuring consistent cutting geometry across replacements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Stechklemmhalter 5mm Cutting Width, 50mm Cutting Height, S25R, 5C-R S229, For 5C Wendeplatten, Weight 0.77kg - Teknik Makina
Take advantage of a 25 mm shank and 200 mm overall length to secure a rigid setup for consistent grooving and parting operations; combine this with 5C indexable insert compatibility for fast insert changes and steady productivity — order via Metav Werkzeuge or consult our specialists for application advice. Grooving clamp holder — compact parting/clamping tool, 25 mm shank, 200 mm length (Teknik Makina) Grooving clamp holder for precision parting and grooving on conventional and CNC lathes; designed for stable clamping of 5C indexable inserts 25 mm shank for secure toolpost mounting 200 mm overall length for extended reach Compatible with 5C indexable inserts 5 mm cutting width for fine grooving Achieve consistent cuts through a rigid mounting system A firm mounting is essential for reliable parting and grooving. The 25 mm shank with ISO designation S25R provides a compact, standardised interface that reduces play and vibration at the cutting point. Increased rigidity delivers a more constant kerf and prolongs insert life, which in turn reduces tool change frequency and downtime. For workshops that value process stability, the compact holder design contributes directly to repeatable results and predictable production flow. Quick insert changes and controlled cutting geometry Clamping compatibility with 5C inserts and the secondary designation 5C-R S229 ensures straightforward insert replacement and consistent cutting geometry. The tool accepts a 5 mm cutting width and offers a 50 mm cutting height, allowing precise control of groove depth and profile. The secure clamp mechanism facilitates quick insert change while maintaining axial position, making it suitable for short-cycle jobs where set-up speed and consistent component quality matter most. Reach and balance for everyday workshop use With a 200 mm overall length and an outside diameter of 33 mm, the holder balances accessibility and compactness for toolpost-mounted operations. The assembly weight of 0.77 kg supports a steady feel during manual handling and helps reduce resonance during cutting. This combination of reach and mass improves comfort when setting up tooling and contributes to safer, more predictable machining conditions in small-batch production or repair work. Practical fit for professional toolrooms and production shops Designed for routine parting and grooving tasks, the holder suits industrial and craft environments where reliable clamping and fast turnaround are priorities. The standardised shank and insert compatibility simplify inventory and spare-part management, enabling workshops to maintain productivity with fewer specialised components. The result is a pragmatic balance of precision and availability that supports efficient workshop operation. Contact Metav Werkzeuge today to discuss the Teknik Makina grooving clamp holder K636TM and secure the right tooling configuration for the application; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: K636TM Manufacturer: Teknik Makina Designation: Grooving clamp holder Facts Shank diameter: 25 mm Overall length: 200 mm Cutting height: 50 mm Cutting width: 5 mm Outside diameter: 33 mm Weight: 0.77 kg Inserts: 5C Special features ISO shank designation S25R Secondary holder designation 5C-R S229 For parting and grooving operations Compatible with 5C indexable inserts FAQ Which insert type fits this holder? The holder accepts 5C indexable inserts; the unit references designation 5C and 5C‑R S229 for insert compatibility. What is the shank size and mounting standard? The shank is 25 mm with ISO designation S25R, making it compatible with standard toolpost and holder systems that accept a 25 mm shank. What are the cutting width and cutting height? The tool provides a 5 mm cutting width and a 50 mm cutting height, allowing fine grooving and controlled parting depths. Is this tool suitable for CNC and manual lathes? Yes; the holder’s standardised shank and compact design make it suitable for both CNC and conventional lathes where a 25 mm toolpost mount is used. How does the holder affect tool life and surface finish? The rigid clamping and standardised shank reduce vibration, which improves surface finish and extends insert life through more stable cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Stechklemmhalter KGMN S20M 4C For KGEVR-KGMN 400 Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a rigid 20 mm shank, compatibility with Korloy KGEVR‑KGMN 400 inserts and a compact 150 mm overall length to maintain precise grooving and parting operations. Order the parting and grooving clamp holder directly via Metav Werkzeuge or consult their specialists for application guidance. Parting and Grooving Clamp Holder K666TM — 20 mm shank, 4 mm cutting width (Teknik Makina) Parting and Grooving Clamp Holder K666TM is a compact clamping solution for indexable‑insert grooving and parting tasks on lathes and turning centres, designed to fit standard tool posts and tight setups. Rigid 20 mm shank for stable clamping Compatible with Korloy KGEVR‑KGMN 400 inserts 4 mm maximum cutting width for fine grooving Compact 150 mm overall length for confined workspaces Consistent cut quality through rigid clamping and correct geometry A holder with a 20 mm shank and sturdy body reduces vibration and runout, which directly improves surface finish and insert life. The defined cutting height of 45 mm establishes the correct tool centre relative to the workpiece when combined with common tool post setups. The result is repeatable groove profiles and fewer re‑cuts. By prioritising mechanical stability, process reliability is increased and cycle times can be kept consistent. Fast insert changes and clear compatibility with indexable geometry Designed for use with Korloy KGEVR‑KGMN 400 indexable inserts and the KGMN holder family designation, this clamp holder supports quick insert replacement and secure clamping of the cutting edge. The 4 mm cutting width suits narrow grooves and parting operations where chip control and edge strength matter. Clear compatibility with the ISO‑style shank designation S20M 4C simplifies procurement and ensures interchangeability across workshops that run Korloy inserts. Compact form factor that eases integration into workshop workflows With an overall length of 150 mm and a modest weight of 0.374 kg, the unit fits tightly between neighbouring tools and accessories on the turret or tool post. The moderate diameter of 25 mm and narrow profile reduce interference during multi‑tool setups, so changeover and indexing are more straightforward. This compact design supports lean machining layouts and helps maintain accessibility for coolant lines and work‑holding fixtures. Contact Metav Werkzeuge today for tailored application advice and to secure the Teknik Makina K666TM parting and grooving clamp holder for precision grooving work — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K666TM Manufacturer: Teknik Makina Product name: Parting and grooving clamp holder SKU: K666TM Core dimensions Shank diameter: 20 mm Overall length: 150 mm Cutting height: 45 mm Cutting width: 4 mm Diameter: 25 mm Weight: 0.374 kg Compatibility & special features Compatible with Korloy inserts KGEVR‑KGMN 400 Shank designation ISO: S20M 4C Holder designation: KGMN Application focus: parting and grooving operations FAQ Which inserts fit this holder? The K666TM is specified for Korloy KGEVR‑KGMN 400 indexable inserts; compatibility is stated in the product data and matches the KGMN insert family geometry. What is the shank size and why does it matter? The holder has a 20 mm shank, which provides the rigidity needed for grooving and parting; a stiffer shank reduces vibration and improves insert life. How wide a groove can be cut with this holder? The clamp holder supports a maximum cutting width of 4 mm, suitable for narrow grooving and parting operations where chip control is critical. Is the overall length suitable for tight setups? Yes, with an overall length of 150 mm and a compact weight of 0.374 kg, the holder is designed to integrate into confined turret arrangements. What shank and holder designations are relevant for ordering? Refer to ISO shank designation S20M 4C, holder designation KGMN, and SKU K666TM when specifying the part for procurement. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26 Stechklemmhalter 2mm Cutting Width, 40mm Cutting Height, S20Q Shank, 2C For Indexable Inserts, Innenkühlung, Right-Handed - Teknik Makina
Take advantage of precise parting performance and a secure 20 mm shank for consistent production results; the combination of a narrow 2 mm cutting width and a 40 mm cutting height supports fine-grooving tasks with stable clamping. Order the holder through Metav Werkzeuge or consult our specialists for application-specific advice. Grooving Clamp Holder K642TM — 20 mm shank, 2 mm cutting width (Teknik Makina) Grooving Clamp Holder K642TM is a lathe-mounted clamp holder engineered for accurate parting and grooving with 2C indexable inserts, offering a compact 180 mm overall length for extended reach in turning operations Parting toolholder for 2C inserts 20 mm shank for secure mounting 2 mm cutting width for narrow grooves 180 mm overall length for extended reach Reliable rigidity for repeatable grooving quality The holder delivers stability through a robust clamping interface and a 20 mm shank, which together reduce vibration during cutting and promote repeatable results. With a 2 mm cutting width specified for narrow-groove operations and a 40 mm cutting height, the design supports controlled chip formation and consistent edge engagement. The clamping concept is aimed at maintaining insert position under varying cutting loads; this reduces rework and improves process uptime in production environments where consistent groove dimensions are required. Optimised for lathe setups and straightforward installation Designed for common lathe toolposts, the toolholder accepts inserts in the 2C form factor and mates with S20Q-type shank arrangements, simplifying tool setup and inventory management. The 180 mm overall length provides additional reach without compromising stiffness, so operators benefit from both accessibility and control. Clear nominal dimensions and a compact mass of 0.444 kg mean balancing and tool-change routines remain efficient, while the simple clamp mechanism reduces setup time compared with more complex holders. Practical compatibility and machining considerations Material compatibility depends on the chosen insert grade and cutting parameters; the holder itself is specified for use with 2C inserts, enabling selection of carbide or coated grades according to application needs. The combination of cutting height and insert geometry allows stable engagement for slim grooves, and the secure clamping reduces the risk of insert shift during interrupted cuts. For operations requiring repeatable groove widths and tight dimensional tolerances, the holder’s geometry supports predictable machining results when paired with appropriate insert technology. When this holder is the preferred choice Choose this toolholder where narrow-parting or precision grooving is needed across short to medium production runs. Its compact design and standard shank format simplify integration into existing tool inventories, while the secure clamp and nominal dimensions reduce the setup variables that can affect process consistency. The holder is particularly suitable for workshops and small-batch production that require a reliable, easy-to-handle solution for parting and grooving tasks. For application guidance and to obtain Teknik Makina grooving clamp holders directly from our European distribution hub, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and order coordination Technical data Article number: K642TM Manufacturer: Teknik Makina Designation: Grooving clamp holder Core specifications Shank diameter: 20 mm Cutting height: 40 mm Cutting width: 2 mm Overall length: 180 mm Diameter: 26 mm Weight: 0.444 kg Suitable for inserts: 2C Special features Compatible with S20Q shank type Insert form: 2C For grooving/parting operations Precision clamping mechanism FAQ Which insert shape fits this holder? The holder is designed for 2C indexable inserts and accepts the standard insert geometry for narrow grooving and parting tasks. What is the shank diameter and why does it matter? The shank diameter is 20 mm; this dimension ensures a secure mount in compatible toolposts and contributes to reduced vibration during cutting. What groove width can be produced with this holder? The holder specifies a 2 mm cutting width, making it suitable for narrow groove and parting operations where slim kerf performance is required. Is this holder suitable for long overhangs? With an overall length of 180 mm, the holder offers additional reach; however, stiffness decreases with overhang, so keep the setup as rigid as possible for high-precision work. How heavy is the toolholder and how does weight affect handling? The mass is 0.444 kg, which supports easy handling during tool changes while maintaining enough mass to dampen minor vibrations in typical lathe setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26 Stechklemmhalter 4C For Wendeplatten, S20Q 4C-R GRP, Innenkühlung, Rechtsschneidend - Teknik Makina
Take advantage of the combination of ISCAR-compatible indexable insert support, rigid S20Q shank and compact 180 mm length for reliable parting operations; order via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Parting clamp holder K706TM – compact, rigid holder for 4C indexable inserts by Teknik Cutting Tools Parting clamp holder K706TM is a compact clamping solution designed for precise parting and grooving tasks in workshop and production environments; fits 4C indexable inserts and is compatible with ISCAR systems Clamp for 4C indexable inserts Shank Ø 20 mm, S20Q designation Cutting width 4 mm, cutting height 35 mm Overall length 180 mm, weight 0.463 kg Improved process reliability through stiff design and defined geometry The holder delivers a stiff, vibration-resistant interface between machine and cutting edge, engineered to keep the insert stable during parting operations. With a shank diameter of 20 mm and an S20Q shank designation, the toolholder reduces deflection and helps to preserve cutting-edge life. For machine shops where repeatability matters, the result is consistent parting quality and fewer rejects per batch, which supports predictable production throughput. Precise cutting parameters for narrow grooving and parting Designed around a cutting width of 4 mm and a cutting height of 35 mm, this clamp holder is suited to fine parting and narrow grooving tasks where clearance and accuracy are critical. The overall length of 180 mm provides access without excessive overhang, improving stability. Compatibility with 4C indexable inserts from established manufacturers such as ISCAR ensures readily available cutting geometries for a range of steels and non-ferrous materials, enabling fast tool changes and reduced downtime. Practical compatibility and easy integration for workshop use The clamp holder is specified for use with the 4C-R GRP clamp designation and pairs with standard S20Q shafts, which simplifies tool inventory and setup. Its compact mass (approx. 0.463 kg) keeps tool balance manageable on small and medium lathes. The clear designation of interface types and insert family supports quick selection for tooling lists and makes the component straightforward to integrate into existing turning and parting tool assemblies. For tailored advice on integrating the K706TM into production workflows or to request cutting data and availability, contact Metav Werkzeuge for expert consultation and fast, transparent supply from Emmerich Technical data Article number: K706TM Manufacturer: Teknik Makina Shank diameter: 20 mm Cutting height: 35 mm Cutting width: 4 mm Diameter: 26 mm Overall length: 180 mm Weight: 0.463 kg Fits indexable inserts: 4C Compatible insert maker: ISCAR Shank designation: S20Q Clamp holder designation: 4C-R GRP FAQ What insert type does this holder accept? This parting clamp holder accepts 4C indexable inserts; the K706TM is prepared for the 4C insert family and secures them with the 4C-R GRP clamping arrangement. Is the holder compatible with ISCAR inserts? Yes, the K706TM is ISCAR-compatible as stated in the product specification, allowing the use of widely available ISCAR 4C inserts. What are the key dimensions to check for machine compatibility? Check the shank diameter (20 mm), the overall length (180 mm) and the toolpost/dedicated holder diameter (26 mm) to ensure correct fit in the intended lathe or turret. Can this holder be used for narrow grooving applications? The specified cutting width of 4 mm and cutting height of 35 mm make the holder suitable for narrow grooving and fine parting where small kerf width is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Grooving Clamp Holder for MGM 300 Indexable Inserts 3mm Cut Width, 180mm Shaft, Left-Hand - Teknik Makina
Take advantage of a compact 180 mm overall length combined with a 26 mm tool diameter and secure clamping for consistent left-hand grooving. Order the holder via Metav Werkzeuge or request advice from our consultants for specification checks and rapid supply from Emmerich. Grooving clamp holder for MGM 300 indexable inserts — 26 mm, left-hand, 180 mm (Teknik Makina) A robust grooving clamp holder designed for left-hand parting and grooving operations with MGM 300 indexable inserts, suitable for production turning applications on lathes and turn-mill centres. 26 mm tool diameter Compatible with MGM 300 inserts (Korloy) Left-hand cutting direction 180 mm overall length, compact design Greater process reliability through defined geometry and compatibility The holder delivers repeatable results thanks to a precisely defined 26 mm tool diameter and a 20 mm shank compatible with standard tool posts. Built to accept MGM 300 indexable inserts from Korloy, the unit ensures insert seating and clamping are consistent across tool changes, which reduces setup variance and scrap. The specified 15.5 mm cutting head width and a nominal 3 mm cutting-width capability make this tool suitable for narrow grooving and parting tasks where tight tolerances are required. By describing the geometry in plain terms, workshops gain clarity on where the holder fits into existing tooling systems. Secure clamping and quick adjustment for uninterrupted production Clamping is achieved via an M5x12 clamping screw, tightened with a 4 mm Allen key, providing strong axial fixation without complex procedures. The compact design, at 180 mm overall length and a mass of 0.45 kg, keeps tool overhang low and helps maintain rigidity during aggressive cuts. The maximum grooving depth of 6 mm allows controlled material removal in a single pass for many applications; for deeper sections, a staged approach is recommended. Clear, standard fastenings and a simple adjustment routine support short changeover times and higher machine uptime, delivering measurable efficiency gains on the shop floor. Designed to support production goals and operator confidence Intended for left-hand operations, this holder is optimised for routines where directionality matters, such as facing from the chuck or back-grooving. Its compatibility with a widely used insert family simplifies purchasing and stock management, reducing the number of different toolholders and spare inserts required. The shank designation S20Q and the compact profile allow straightforward integration into automatic tool changers and modular tool systems. For quality assurance, the construction supports predictable cutting behaviour, which helps meet batch tolerances and customer specifications consistently. Contact Metav Werkzeuge today for expert guidance on the Teknik Makina grooving clamp holder (SKU K900TM) and to arrange prompt supply from Emmerich with tailored delivery options Technical data Article number: K900TM Label: 26mm Stechklemmhalter MGM 300 L180mm Manufacturer: Teknik Makina eClass: 21181005 Facts Diameter: 26 mm Shank diameter: 20 mm Overall length: 180 mm Weight: 0.45 kg Cutting width: 3 mm Max grooving depth: 6 mm Cutting head width: 15.5 mm Cutting direction: left Special features Compatible inserts: MGM 300 Suitable insert manufacturer: Korloy Clamping screw: M5x12 Allen key: 4 mm Shank designation: S20Q SKU: K900TM FAQ What insert types fit this holder? The holder is made for MGM 300 indexable inserts and is specified as compatible with inserts from Korloy for reliable seating and repeatability. Is the holder suitable for automatic tool changers? Yes, the S20Q shank and compact 180 mm overall length support integration into modular tool systems and many automatic tool changers. What is the maximum grooving depth? The maximum recommended grooving depth is 6 mm, enabling single-pass removal for many narrow-grooving tasks. Which clamping hardware is used? Clamping is secured with an M5x12 screw; adjustment and tightening use a 4 mm Allen key for straightforward maintenance. Is this a left- or right-hand holder? This tool is configured for left-hand cutting direction, optimised for grooving and parting operations that require that orientation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Grooving Tool Holder 3mm Cutting Width, 40mm Cutting Height, S20Q Shank, For 3C Inserts, 180mm Overall Length, 20mm Shank Diameter - Teknik Makina
The combination of a 20 mm shank and 180 mm overall length delivers consistent rigidity and reach for precise parting and grooving. Benefit from standardised compatibility with 3C indexable inserts and the S20Q shank designation for straightforward integration on conventional toolposts. Order the parting tool holder directly via Metav Werkzeuge or ask the consultants if needed. Parting Tool Holder K646TM — 20 mm shank, 180 mm overall length (Teknik Makina) A compact and rigid parting tool holder K646TM intended for precision grooving and cut‑off operations on CNC lathes, optimised for indexable insert use 20 mm shank diameter for rigid clamping 180 mm overall length for deep reach Compatible with 3C indexable inserts Cutting width 3 mm, cutting height 40 mm Superior rigidity for accurate cut-off operations The holder's 20 mm shank and balanced mass mean reduced vibration and repeatable positioning at the toolpost, which improves surface finish and extends insert life. With an overall length of 180 mm, the design offers secure access for deeper parting tasks while maintaining stability. The moderate weight of 0.459 kg keeps the toolholder easy to handle during set-up yet substantial enough to avoid chatter under typical turning loads. These measurable characteristics translate directly into fewer rejected parts and a steadier production flow. Fast changeover through standardised insert and shank fittings Compatibility with 3C indexable inserts and the holder designation 3C‑R S224 enables rapid insert replacement and predictable cutting geometry. The cutting width 3 mm in combination with a cutting height of 40 mm provides a clear specification for selecting inserts and calculating tool offsets in CAM programs. The S20Q shank designation aligns the toolholder with established shank standards, simplifying inventory management and reducing setup times across different machines. Designed for reliable workshop integration and consistent results The toolholder's standard dimensions and clear technical data support straightforward programming of offsets and predictable tool life, which benefits batch production and repetitive operations. The device's compatibility with indexable inserts reduces tooling costs by allowing frequent insert changes without replacing the holder body. As a result, the holder supports efficient maintenance cycles and limits downtime while preserving machining quality. For demanding parting and grooving applications, request the Teknik Makina K646TM from Metav Werkzeuge — Metav’s specialists in Emmerich can advise on suitability and supply directly via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K646TM Manufacturer: Teknik Makina Designation: Parting tool holder (Stechklemmhalter) Facts Shank diameter: 20 mm Overall length: 180 mm Cutting height: 40 mm Cutting width: 3 mm Diameter: 26 mm Weight: 0.459 kg Special features Compatible with insert type: 3C Shank designation: S20Q Holder designation: 3C‑R S224 Suitable for indexable inserts FAQ Which insert type fits this holder? The K646TM accepts 3C indexable inserts, matching the specified insert family for predictable cutting geometry. What shank size is required for clamping? The holder uses a 20 mm shank (S20Q), suitable for standard toolpost clamping systems. What is the overall length and how does it affect reach? With an overall length of 180 mm, the toolholder provides extended reach for deeper parting while maintaining rigidity. What cutting dimensions are available from the holder? The K646TM is specified for a cutting width of 3 mm and a cutting height of 40 mm, which guides insert selection and tool offset programming. Who manufactures the toolholder and who is responsible for supply? The K646TM is manufactured by Teknik Makina; supply and responsibility are handled by Metav Werkzeuge for distribution in Europe. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
26mm Grooving Tool Holder 3mm Cutting Width, S20Q 3C-R MGM, For 3C MGM Inserts, Precision Shank 20mm, Cutting Height 35mm, Total Length 180mm - Teknik Makina
Benefit from a combination of precise clamping and compact dimensions: the holder’s 20 mm shank and 3 mm cutting width deliver stable grooving with reduced vibration, while the 180 mm overall length provides reach for deeper operations. Order directly via Metav Werkzeuge or consult our specialists for application advice. Stechklemmhalter (Grooving Clamp Holder) – 20 mm Shank, 3 mm Cut Width by Teknik Makina The Stechklemmhalter is a grooving clamp holder designed for lathe and CNC grooving operations, compatible with Korloy 3C MGM indexable inserts and engineered for rigid toolholding with a 20 mm shank and 180 mm overall length 20 mm shank for rigid toolholding 3 mm cutting width for narrow grooves Compatible with Korloy 3C MGM inserts 180 mm overall length for extended reach Stable clamping for consistent groove quality The holder’s 20 mm shank and compact mass deliver rigid clamping, which significantly reduces chatter and vibration during grooving operations. This mechanical stability translates into a more consistent surface finish and extended life for indexable inserts. With a net weight of 0.45 kg, the assembly balances stiffness and manageable tool inertia, helping to maintain repeatable results across production batches. Designed for narrow grooving and reliable insert compatibility The tool is specified for a 3 mm cutting width and a 35 mm cutting height, dimensions that make it suitable for precise narrow-groove and parting tasks. It accepts 3C MGM indexable inserts and matches the ISO boring-bar designation S20Q 3C-R, ensuring straightforward integration with established insert systems. For workshops unfamiliar with insert codes: the stated cutting width defines the groove width produced, while the cutting height indicates the maximum protrusion the holder accommodates for the insert geometry. Workshop efficiency through compact reach and simple integration With an 180 mm overall length and a nominal outer diameter of 26 mm, the holder provides the reach required for deeper approaches without sacrificing rigidity at the toolpost. The MGM clamping type offers dependable retention of the cutting insert, and the straightforward shank size minimises the need for adapter tooling on machines prepared for a 20 mm holder. This design supports fast set-ups and stable machining cycles, which contributes to predictable throughput and less unplanned downtime. For robust grooving performance, request supply and technical guidance for the Teknik Makina Stechklemmhalter from Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for detailed application support and availability Technical Data SKU: K604TM Manufacturer: Teknik Makina Article designation: Stechklemmhalter Compatible inserts: 3C MGM Compatible insert maker: Korloy Facts Shank diameter: 20 mm Overall length: 180 mm Outer diameter: 26 mm Cutting height: 35 mm Cutting width: 3 mm Weight: 0.45 kg ISO boring-bar designation: S20Q 3C-R Special features MGM clamping system Intended for grooving / parting tasks Suitable for Korloy indexable inserts Compact, rigid design for reduced vibration FAQ Which indexable inserts fit this holder? The holder accepts 3C MGM indexable inserts; compatibility with Korloy 3C MGM inserts is specified for this Teknik Makina grooving clamp holder (SKU K604TM). What are the key dimensions to check for machine compatibility? Key dimensions are a 20 mm shank, 180 mm overall length, 3 mm cutting width and 35 mm cutting height; these determine toolpost fit and the groove geometry produced by the Stechklemmhalter. Can this holder be used on CNC lathes and manual lathes? The holder is designed for use on lathes and CNC turning centres that accept a 20 mm shank tool; the compact mass and rigid clamping suit both manual and automated turning setups. How is the insert secured in the clamping block? Retention is provided by the MGM clamping system specified for this holder, which secures 3C MGM inserts reliably for stable grooving performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Stech Klemmhalter 3mm Cutting Width, S20Q Shank, 35mm Cutting Height, For 3C ZT.D Inserts, 3C-R ZT.D Bar, Weight 0.661kg, Overall Length 180mm - Teknik Makina
Reliable clamping and consistent parting performance with a compact 20 mm shank, 3 mm cutting width and compatibility with ZCC 3C ZT.D indexable inserts — combine precision, low vibration and simple integration into existing toolposts. Order the Parting and Grooving Clamp Holder directly via Metav Werkzeuge or ask our consultants for application support. Parting and Grooving Clamp Holder K680TM — 20 mm shank, 3 mm cutting width (Teknik Makina) A robust Parting and Grooving Clamp Holder K680TM engineered for precise turning and grooving tasks on CNC lathes, suited to indexable inserts in the 3C ZT.D family. Compact 20 mm shank for standard toolposts Precise 3 mm cutting width for narrow grooves Compatible with ZCC 3C ZT.D indexable inserts 180 mm overall length for extended reach Stable clamping for repeatable groove quality The holder delivers stable clamping and reduced chatter through a rigid body and defined seating for the insert. With a 20 mm shank and a balanced 180 mm overall length, the design minimises deflection during parting and grooving operations, which directly improves surface finish and repeatability. The arrangement for the insert ensures reliable chip control and consistent engagement depth; less rework and fewer rejected parts result from the improved process stability. Built for compatibility and quick insert changes Compatibility with the ZCC 3C ZT.D insert family and the S20Q shank designation enables quick toolset standardisation across workshops. The clamping concept allows controlled, tool-free indexable insert changes where the insert geometry is matched to a 3 mm cutting width and a cutting height of 35 mm, so set-up times are reduced and machine uptime is increased. This straightforward integration into existing tool holders supports efficient tool management and predictable cycle times. Practical design that reduces downtime Engineered for everyday workshop demands, the holder weighs 0.661 kg, providing a balance between rigidity and manageable handling at the bench. The solid construction and defined seating reduce the need for frequent retightening, lowering maintenance intervals. As part of a wider tooling system, the unit supports reliable batch production and quick changeover, helping to keep production schedules on track while maintaining precision. For secure parting and grooving performance from Teknik Cutting Tools, contact Metav Werkzeuge for specialist advice and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K680TM Manufacturer: Teknik Makina Suitable for inserts: 3C ZT.D (ZCC) Facts Shank diameter: 20 mm Cutting height: 35 mm Cutting width: 3 mm Overall length: 180 mm Diameter: 26 mm Weight: 0.661 kg Special features Bohrstange designation: S20Q Secondary holder designation: 3C-R ZT.D Compatible insert manufacturer: ZCC Intended use: Parting and grooving (indexable inserts) FAQ What insert types fit this clamp holder? The Parting and Grooving Clamp Holder K680TM accepts 3C ZT.D indexable inserts from ZCC; the seating and clamping geometry are matched to that insert family for correct chip flow and secure fixation. Is the holder suitable for standard toolposts on small lathes? Yes, the 20 mm shank and compact form factor of the K680TM are designed to integrate with standard toolposts and holders used in small to medium turning centres. How does the clamping system affect tool change times? The clamping arrangement on this holder facilitates straightforward insert replacement, reducing set-up time compared with dedicated clamp designs and supporting faster tool changes during batch production. Can this holder be used for heavy roughing cuts? The holder is optimised for parting and groove operations with a 3 mm cutting width and is intended for precise cutting and finishing. For heavy roughing, a more massive roughing toolholder would normally be recommended. What are the key dimensional data to check before ordering? Check the 20 mm shank diameter, 180 mm overall length, cutting height 35 mm and the required insert family (3C ZT.D) to ensure compatibility with the machine and insert inventory. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Stechklemmhalter 3mm Cutting Width S20Q 3C-R GRP For 3C Inserts, Shaft Ø20mm, Cutting Height 35mm - Teknik Makina
Take advantage of the combination of a 20 mm shank for stable clamping, a 3 mm cutting width for precise grooves and a 35 mm cutting height for deeper cuts — engineered to keep production consistent. Order the K702TM grooving clamp holder directly via Metav Werkzeuge or consult our specialists for application advice. K702TM Grooving clamp holder — 20 mm shank, 3 mm cutting width (Teknik Makina) A K702TM grooving clamp holder designed for secure clamping of 3C indexable inserts, optimised for precision parting and grooving operations on conventional and CNC lathes Secure clamp for 3C indexable inserts 20 mm shank for standard toolposts 3 mm cutting width for precise grooves Stable clamping for repeatable grooves The holder provides a robust clamping concept that reduces insert movement under load, giving consistent cutting geometry across batches. With a 20 mm shank, the tool integrates with common toolposts and holders for a secure fit, while the 3 mm cutting width is intended for fine grooving and narrow parting tasks. This combination improves dimensional repeatability and reduces rework, which supports efficient shop-floor processes. Geometry tailored for deeper grooving operations A nominal cutting height of 35 mm and an overall length of 180 mm offer the clearance and reach required for a range of turned component profiles. The taller cutting height allows the cutting edge to engage material at the correct centreline on many setups, while the 180 mm length balances reach and rigidity. These dimensions help maintain a stable cut path and reduce the tendency for chatter during moderate-depth grooving operations. Compatibility that simplifies tooling choices Designed for use with 3C indexable inserts and explicitly compatible with ISCAR insert geometries, the holder reduces complexity when specifying consumables. The tool is identified by shank designation S20Q and clamp holder designation 3C‑R GRP, enabling straightforward matching with existing insert stocks and holders. This compatibility streamlines ordering and minimises downtime when inserts are changed. Compact mass and workshop handling advantages Weighing 0.463 kg, the holder combines manageable handling with sufficient mass to dampen minor vibrations. Its nominal diameter of 26 mm and standardised interface mean straightforward mounting and replacement, helping to keep set-up times short. The compact design supports flexible placement on the turret or toolpost without excessive overhang, aiding both manual and automated lathe applications. Contact Metav Werkzeuge for tailored advice on Teknik Makina’s K702TM grooving clamp holder and to arrange delivery or a detailed suitability check from our Emmerich team Technical Data SKU: K702TM Manufacturer: Teknik Makina Product: grooving clamp holder ECLASS: 21181005 Dimensions & weights Shank diameter: 20 mm Overall length: 180 mm Diameter: 26 mm Cutting height: 35 mm Cutting width: 3 mm Weight: 0.463 kg Compatibility & features Compatible with ISCAR 3C indexable inserts Suitable insert type: 3C Tool shank designation: S20Q Clamp holder designation: 3C-R GRP Intended use: grooving / parting operations FAQ Which insert types fit this holder? The K702TM grooving clamp holder accepts 3C indexable inserts and is specified for compatibility with ISCAR 3C insert geometries. What shank diameter is required for mounting? Mounting requires a 20 mm shank interface, matching the holder's shank diameter for secure clamping in standard toolposts. What are the cutting width and cutting height specifications? The holder supports a 3 mm cutting width and a 35 mm cutting height, suited to fine grooving and deeper parting tasks. What is the overall length and mass of the tool? Overall length is 180 mm and the tool weighs 0.463 kg, balancing reach with rigidity for stable cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, reliable parting and grooving for precision turning
Parting and grooving tools, also referred to as parting blades, grooving tools or cut-off tools, are narrow carrier tools for lathes fitted with replaceable carbide inserts. Supplied as solid holders or flat blades, they are designed to cut precise grooves and to part finished components cleanly from the material bar.
Why internal coolant matters for deep cuts and tough materials
When used in simple form without internal coolant, the cutting fluid is applied via external machine nozzles; this is often sufficient for very shallow grooves and easily machinable materials. For deeper grooving and parting operations, however, the tool nearly encloses the slot so that external coolant cannot reach the cutting edge. Tools with internal coolant incorporate fine, integrated channels that deliver coolant under high pressure directly to the insert and beneath the chip. This targeted supply controls the intense heat in the confined cutting zone and uses flushing pressure to eject chips reliably, preventing chip jamming, surface damage and sudden tool breakage.
Clear operational benefits you can measure
- faster cycle times through reliable chip evacuation and uninterrupted cutting
- extended tool life thanks to effective heat control at the cutting edge
- consistent surface finish by avoiding chip re-cutting and scarring
- safer machining of hard or ductile materials due to reduced risk of tool fracture
- simplified setup when holders with integrated channels replace complex external coolant rigs
Metav as a practical partner for your workshop
Metav stands for democratisation of precision: decades of expertise, a quality filter in Emmerich and an assortment that supports industry and trade. With more than 48,000 customers and a catalogue of over 250,000 products, Metav provides a focused selection of parting and grooving tools, accessories and matched holders so that procurement and technical choice remain straightforward and dependable.
Parting and grooving tools bring reliable groove geometry and safe parting to turning operations; choosing holders with integrated coolant channels is essential for deep cuts and demanding materials. If technical advice is needed, Metav’s product specialists can help select the appropriate tool geometry and coolant configuration for the application.
FAQ
When is internal coolant necessary for parting tools?
Internal coolant becomes necessary for deep grooving and parting or when machining hard or ductile materials; it delivers coolant directly to the insert and beneath the chip, which is critical when external nozzles can no longer reach the cutting edge.
Can parting tools be used without internal coolant?
Yes — for very shallow cuts and easily machinable materials, parting tools can be used with external machine coolant nozzles, but performance and tool life will drop markedly for deeper cuts.
How do parting tools prevent dangerous chip jamming?
Parting tools with integrated channels use high-pressure coolant to flush chips out of the narrow slot, preventing chips from becoming trapped and minimising the risk of surface damage and abrupt tool failure.
What should be considered when choosing a grooving insert and holder?
Select a combination that matches the required groove depth and material grade; holders offering integrated high-pressure channels are preferred for deep cuts or poor-chip-breaking materials to ensure heat control and reliable chip evacuation.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com