Precision cut-off tools for accurate grooving and part-off operations
Cut-off tools are narrow holder systems for lathes designed to produce precise grooves and part-offs, offering reliable control when machining steels and other workpiece materials where clean separation is essential. They serve as either solid clamp-style holders or flat tool blades fitted with indexable carbide inserts, and when equipped with internal coolant channels they deliver high-pressure coolant directly to the insert to control heat and evacuate chips efficiently. Using these tools reduces the risk of chip jamming, surface damage and sudden tool failure while improving repeatability, particularly in deep grooving and tough materials where external coolant is insufficient. Key advantages include enhanced cutting stability, extended insert life and consistent part quality through optimised chip evacuation and thermal management.
125mm Grooving Clamp Holder 16x16mm 2mm Cut Width, Left-Hand - Teknik Makina
Take advantage of a compact, ISO‑compatible design and secure M6 clamping for reliable left‑hand parting in confined setups; order the holder directly via Metav Werkzeuge or request advice from our consultants for seamless integration into production. Parting tool holder L125 mm — left‑hand, ISO 1616, Teknik Makina A parting tool holder engineered for left‑hand parting and grooving tasks on lathes and turning centres, compatible with 16 x 16 mm tool shanks and compact setups. Parting tool holder ISO 1616 compatible Left‑hand orientation for parting operations 125 mm overall length for compact setups Secure clamping with M6x20 screw and 5 mm Allen Stable clamping for consistent parting results The holder offers a secure clamping solution for parting inserts with an ISO 1616 shank interface, ensuring repeatable positioning and minimal tool movement under load. The M6x20 clamping screw together with the supplied 5 mm Allen key provides a tight, reliable fixation so that insert slippage is reduced and downtime from re‑clamping is minimised. For machining operations where dimensional consistency matters, this stability translates into fewer rejects and a steadier cycle time. Compact format to fit tight tool posts and fixtures With an overall length of 125 mm and a body designed around a 16 x 16 mm cross section, the holder is tailored for installations where space is limited. The compact footprint enables close tool spacing on multi‑tool turrets and facilitates use on smaller bench lathes without sacrificing accessibility. This short‑length configuration allows higher flexibility in cell design and helps maintain safe clearances during rapid tool index changes. Designed for precise, shallow parting cuts The toolholder is configured for narrow parting operations, accommodating a cutting width of 2 mm and a maximum cutting depth of 16 mm for the parting blade. Such proportions are advantageous when performing fine separation cuts or producing thin discs where control over chip formation and surface finish is required. The left‑hand orientation supports operations where the cutting forces and machine setup demand that the blade engage from the operator’s left. Fast tool changes and user‑friendly maintenance Routine changeovers are simplified: the insert or parting blade is clamped with the single M6x20 screw and adjusted using the 5 mm Allen key, enabling quick replacement and repositioning without elaborate tooling. The straightforward mechanical design reduces training time for operators and keeps maintenance tasks efficient. Lightweight at 0.27 kg, the holder is easy to handle while remaining robust enough for repeated workshop use. For a reliable left‑hand parting solution from Teknik Makina, contact Metav Werkzeuge to confirm suitability for existing fixtures and to order SKU D881TM directly from our Emmerich stock Technical data SKU: D881TM Product type: Parting tool holder Label: Stechklemmhalter L125mm Manufacturer: Teknik Makina Facts Overall length: 125 mm Weight: 0.27 kg Shank size: 16 x 16 mm (ISO 1616) Cutting width: 2 mm Maximum parting depth: 16 mm Clamping screw: M6x20 Allen key: 5 mm Cutting direction: left Special features ISO 1616 compatible Left‑hand parting orientation Compact 125 mm format Secure clamping with M6 screw Suitable for narrow parting blades FAQ What shank size does the holder accept? The parting tool holder accepts a 16 x 16 mm shank in accordance with ISO 1616, ensuring compatibility with standard inserts and blades. Is the holder suitable for right‑hand operations? This holder is configured for left‑hand cutting; for opposite orientation a right‑hand variant should be chosen. What is the maximum parting depth for the toolholder? The maximum cutting depth is 16 mm, matched to the design of the holder and typical narrow parting blades. Which screw and key are needed for clamping? Clamping is achieved with an M6x20 screw and tightened using the supplied 5 mm Allen key for secure fixation. What is the SKU and manufacturer of the toolholder? The holder is supplied as SKU D881TM by Teknik Makina, listed for compact left‑hand parting applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Clamp Holder 16x16mm, 3mm Cutting Width, Left-Hand - Teknik Makina
Take advantage of the combination of compact 16 x 16 shank geometry, a 125 mm overall length and a secure Torx clamping system for consistent parting performance on production lathes; order the holder via Metav Werkzeuge or request consultancy for integration into existing tooling arrays. Parting clamping holder D065TM (L125 mm) – 16 x 16 ISO, left-hand orientation by Teknik Cutting Tools The Parting clamping holder D065TM is a left-hand parting clamp designed for precise and repeatable cut-off operations, featuring a compact 16 x 16 shank and compatibility with ISCAR indexable inserts Left-hand cutting direction 16 x 16 mm shank profile Max plunge depth 16 mm Compatible with ISCAR inserts Compact profile for stable clamping and repeatable cuts The compact 16 x 16 shank geometry delivers a stable connection between toolpost and cutting edge, reducing unwanted vibration during parting operations. With an overall length of 125 mm and a modest mass of 0.267 kg, the holder is easy to handle while providing sufficient overhang for typical turning centres. The ISO designation 1616 indicates a 16 mm height and 16 mm width shank that fits standard 16 × 16 toolposts; this standardisation simplifies tooling changes and reduces set-up time. Secure clamping is achieved via a T15 Torx drive and M4x12.5 screw, ensuring the insert seat remains rigid under cutting loads. Precision cutting capability that reduces rework A maximum plunge depth of 16 mm and a cutting width of 3 mm make the holder well suited to narrow kerf parting and controlled grooving operations. The narrow kerf reduces material waste and lowers the power required per cut, which enhances cycle efficiency on high-throughput lines. The left-hand orientation is optimised for operations where the tool approaches the workpiece from the left, offering predictable chip flow and safer retract behaviour when compared with ad hoc tool arrangements. Designed for use with ISCAR indexable inserts, the clamping concept supports quick insert changes and consistent seat geometry, which contributes to reduced scrap and fewer adjustments on the shop floor. Practical service life and workshop convenience Maintenance and everyday handling are straightforward: the compact mass and familiar 1616 mounting make replacement and inventory management simpler across multiple machines. The toolholder’s secure Torx clamp (T15) and M4x12.5 fastening contribute to repeatable torque application and predictable clamping force, helping to maintain cutting geometry over extended runs. For workshops aiming to streamline their tooling kit, the holder’s compatibility with widely available ISCAR inserts reduces the need for bespoke consumables. The combination of standardised shank size, clear screw specification and compact dimensions supports a predictable supply chain and easier training for machine operators. Contact Metav Werkzeuge for advice on integrating the D065TM parting clamping holder into existing tooling setups and to arrange supply from our Emmerich warehouse Technical data SKU: D065TM Label: Stechklemmhalter L125mm Product type: Stechklemmhalter Manufacturer: Teknik Makina Facts Overall length: 125 mm Weight: 0.267 kg Shank profile: 16 x 16 mm Cutting head width: 16.3 mm Maximum plunge depth: 16 mm Cutting width: 3 mm Cutting direction: left ISO designation: 1616 Torx key: T15 Torx screw: M4x12.5 Special features Compatibility: ISCAR inserts Clamping system: Torx-driven screw Label/SKU: D065TM Categories: Klemmhalter (clamping holders) FAQ How does the 16 x 16 shank affect machine compatibility? The 16 x 16 shank conforms to the common 1616 toolpost standard, so the D065TM parting clamping holder fits standard 16 × 16 tool mounts without adapters. What is the maximum depth this holder can accommodate for parting? The holder supports a maximum plunge depth of 16 mm, suitable for narrow to moderate cross-section parting tasks. Which inserts are compatible with this clamping holder? The clamping holder is specified for use with ISCAR indexable inserts, enabling rapid insert changes and consistent cutting geometry. Is the clamping screw specification important for torque settings? Yes; the M4x12.5 screw with a T15 Torx drive provides reliable clamping force and predictable torque application for consistent seating. Can this holder be used for grooving as well as parting? The 3 mm cutting width and secure seating make the holder appropriate for narrow grooving operations where a narrow kerf and precise depth control are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Clamp Holder 25mm Width 25mm Height M5x12 Torx T20 - Teknik Makina
Combine predictable rigidity with broad compatibility to maintain uninterrupted parting operations: the combination of a 25 x 25 mm ISO 2525 shank and 125 mm overall length delivers stable reach and repeatable results, while the Torx-mounted clamp reduces changeover time. Order the holder directly via Metav Werkzeuge or ask our consultants for application support. Parting clamping holder L125mm — 25 x 25 mm ISO shank, Torx M5x12 clamp (Teknik Makina) A Parting clamping holder L125mm engineered for secure clamping of parting and grooving indexable inserts on conventional and CNC lathes. 125 mm overall length for extended reach 25 x 25 mm ISO 2525 shank for machine compatibility Compatible with Tungaloy indexable inserts Precision shank for consistent parting accuracy The 25 x 25 mm cross-section, manufactured to the ISO 2525 profile, ensures a consistent fit in standard tool posts and quick-change systems. This measured geometry reduces vibration and positional deviation during cut-off operations, translating into fewer rejected parts and lower secondary machining. A defined shank standard helps maintain setup repeatability when multiple holders are used across a production cell. Secure clamping for reduced downtime Clamping is performed using a Torx-mounted screw (M5x12), tightened with a T20 key, which secures the insert carrier without complex adjustments. The straightforward Torx interface provides reliable torque transmission and reduces the risk of screw cam‑out, enabling faster insert changes and minimising operator error. The result is a measurable reduction in tool change time and greater process uptime. Broad compatibility to simplify tooling management Designed to accept indexable inserts from Tungaloy, the holder offers compatibility that helps consolidate tool inventories. Using widely adopted insert formats simplifies procurement and allows shops to leverage existing cutting grades and geometries. Where insert choice is important for optimising chip control or tool life, this holder supports proven insert ranges without requiring bespoke adapters. Robust length and engineering for everyday workshop use With an overall length of 125 mm, the holder balances reach with stiffness to suit common parting and grooving tasks. The compact, square-profile design concentrates rigidity at the cutting zone, assisting accurate plunge cuts and consistent finish. Supplied by Teknik Makina, this tool holder is intended to be a dependable component in a tooling set-up, enabling predictable tool performance across batch productions. For dependable parting performance and compatibility with Tungaloy inserts, consider the Teknik Makina Parting clamping holder L125mm — contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: D856TM Manufacturer: Teknik Makina Facts Overall length: 125 mm Shank width: 25 mm Shank height: 25 mm Shank standard: ISO 2525 Torx screw: M5x12 Torx key size: T20 Compatible inserts: Tungaloy Special features Parting / grooving clamping holder Square shank for tool-post compatibility Torx clamping for secure fixation Category: Clamping holders (metal cutting > clamping holders) FAQ What machines is this holder suitable for? The Parting clamping holder L125mm is suitable for conventional and CNC lathes that accept a 25 x 25 mm ISO 2525 shank, offering a reliable fit in common tool posts and quick-change systems. Which inserts can be used with this holder? This holder is compatible with Tungaloy indexable inserts; selecting the appropriate insert grade allows optimisation for chip control and tool life while using the D856TM holder. How is the insert clamped and what tool is required? Clamping is effected by an M5x12 Torx screw; a T20 Torx key is required for secure tightening, ensuring consistent torque and reduced risk of screw damage. Does the overall length affect stiffness? The 125 mm overall length provides a balance between reach and rigidity; for deeper operations, consider the effect of cantilevered length on vibration and choose a stiffer set-up if necessary. Is this holder supplied ready for installation? The D856TM holder is supplied as a ready-to-fit clamping holder; ensure the correct Torx key and compatible inserts from Tungaloy are used for installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Clamp Holder 3mm Cut Width, Max 18mm Depth, Left-Hand - Teknik Makina
Take advantage of a compact, ISO‑compliant design and robust clamping components to ensure reliable left‑hand grooving operations; order the part directly via Metav Werkzeuge or consult our technical advisors for application guidance. Grooving clamp holder D885TM – 16 × 16 mm, L125 mm (Teknik Makina) A grooving clamp holder engineered for left‑hand grooving and cut‑off tasks in workshop and industrial turning applications Square shank 16 × 16 mm for secure mounting Left‑hand cutting orientation for reverse directions Max plunging depth 18 mm for deeper grooves Includes M5x16 clamping screw and 4 mm Allen key Precision mounting for consistent groove geometry The holder is designed around an ISO 1616 shank format, giving a compact 16 × 16 mm footprint that ensures consistent clamping and repeatable positioning in standard toolposts. The compact L125 mm length balances rigidity and reach, reducing vibration during plunge cuts while keeping the tool accessible in confined setups. With a measured mass of 0.256 kg, the construction is optimised to limit overhang without compromising stability, which supports higher process reliability and consistent groove geometry across production batches. Engineered for left‑hand grooving with measurable depth control For operations requiring reverse cutting direction, the left‑hand orientation provides a clear mechanical advantage in chip flow and finishing for specific part geometries. The holder accommodates a cutting width of 3 mm and permits a maximum plunge depth of 18 mm, enabling the production of deeper grooves or effective cut‑off pre‑slots where required. These defined parameters allow process planners to assess cycle times and tool life more accurately, supporting rational decision‑making on feeds and speeds for predictable throughput. Secure clamping and straightforward maintenance Clamping integrity is achieved using an M5x16 clamping screw and is supplied with a 4 mm Allen key, which simplifies assembly and reduces setup time on the shop floor. The 16 mm cutting‑head width aligns with common insert and clamp geometries, meaning replacement and maintenance operations remain efficient. The straightforward mechanical design reduces hidden maintenance overheads and enables quick checks during production breaks, contributing to uninterrupted machining processes and lower total cost of ownership over time. Compatibility and practical application advice The D885TM holder is tailored for general turning and grooving applications where a compact, robust clamp is required. The square shank and standardised ISO designation facilitate integration into existing tool systems without bespoke adaptors. For operators assessing suitability, the combination of 16 × 16 mm shank, 3 mm cut width, and 18 mm plunge depth provides clear boundary conditions for fixture and process planning, enabling efficient conversational exchanges with engineering and purchasing teams when specifying tooling for a particular job. Contact Metav Werkzeuge for application guidance and to secure the Teknik Cutting Tools grooving clamp holder D885TM for reliable left‑hand grooving operations Technical data Article number: D885TM Label: Stechklemmhalter L125mm Manufacturer: Teknik Makina eClass: 21181005 Dimensions & weight Overall length: 125 mm Shank: 16 × 16 mm Cutting head width: 16 mm Cutting width: 3 mm Max plunge depth: 18 mm Weight: 0.256 kg Cutting direction: left Features & accessories ISO designation: 1616 Clamping screw: M5x16 Allen key: 4 mm Product type: Grooving clamp holder FAQ What is the shank size of the grooving clamp holder? The grooving clamp holder D885TM features a 16 × 16 mm shank corresponding to ISO 1616. Which cutting direction does the holder support? This holder is configured for left‑hand cutting, suitable for reverse‑direction grooving operations. What is the maximum plunge depth for this holder? The D885TM allows a maximum plunge depth of 18 mm, enabling deeper grooves where required. Are fastening accessories included with the holder? Yes, the holder is supplied with an M5x16 clamping screw and a 4 mm Allen key for installation. What length should be allowed for mounting in the toolpost? Allow for the 125 mm overall length when planning toolpost clearance and reach. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
125mm Grooving Clamp Holder 3mm Cutting Width, Left-Hand, 1212 Clamp Size - Teknik Makina
Benefit from a compact, rigid clamping solution that delivers precise left-hand parting with a 12 x 12 mm shank and up to 16 mm cutting depth; order the parting tool holder directly via Metav Werkzeuge or contact our consultants for compatibility advice. Parting tool holder D884TM (Stechklemmhalter L125 mm) — Left-hand, 12 × 12 mm shank by Teknik Makina A compact parting tool holder (Stechklemmhalter) engineered for accurate left-hand parting and grooving operations on lathes and CNC turning centres. Compact 125 mm overall length for confined spaces 12 x 12 mm shank for standard tool posts Left-hand cutting orientation for reverse operations Secure clamping with M5x16 screw and 4 mm Allen Consistent clamping for repeatable parting quality The D884TM is designed to provide secure clamping and dimensional stability during parting operations. A square 12 x 12 mm shank aligns with common tool post standards, reducing setup variations and helping to maintain concentricity during cuts. The clamping mechanism, driven by a M5x16 fastening, ensures the cutting insert or blade is held with minimal play; this results in more consistent wall finish and repeatable groove profiles across batches, which in turn reduces rework and scrap. Compact dimensions that suit tight tool setups With an overall length of 125 mm, this parting holder is optimised for confined working envelopes and multi-tool turrets where space is at a premium. The left-hand orientation means the holder is configured for reverse-direction parting tasks and can be used where tool access or machine rotation requires a left-hand solution. A cutting width of 3 mm enables narrow parting grooves and efficient chip separation, while the small footprint supports close tool spacing without compromising rigidity. Practical fastening and functional benefits for workshop use Installation and maintenance are straightforward: the clamping screw is a standard M5 x 16 and the required Allen key is 4 mm, simplifying routine tool changes and reducing downtime. The holder is specified with a maximum parting depth of 16 mm, which defines the safe engagement range for single-pass and stepped cuts; matching the blade height to the holder’s ISO 1212 designation helps achieve correct rake and clearance angles. These characteristics support efficient chip control and reliable performance in serial production. Contact Metav Werkzeuge for technical matching or to order the Teknik Makina D884TM; email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement and compatibility guidance. Technical data Article number: D884TM Product type: Parting tool holder (Stechklemmhalter) Manufacturer: Teknik Makina Label: Stechklemmhalter L125mm Facts Overall length: 125 mm Weight: 0.16 kg Shank width: 12 mm Shank height: 12 mm Cutting head width: 12 mm Cutting width: 3 mm Max cutting/parting depth: 16 mm Cutting direction: left Special features Shank ISO: 1212 Clamping screw: M5x16 Allen key: 4 mm Secure clamping for inserts or blades FAQ What shank size does the holder use? The holder uses a 12 x 12 mm shank, matching common tool post standards for compact turning holders. Is the tool holder suitable for reverse or left-hand parting? Yes, the holder is supplied in a left-hand configuration intended for reverse-direction parting operations. What is the maximum parting depth with this holder? The maximum parting depth is 16 mm, which defines the safe engagement range for typical grooving and parting blades. Which screw and key are required for clamping? Clamping is performed with an M5 x 16 screw and a 4 mm Allen key for straightforward tool changes. What is the SKU and manufacturer of this parting holder? The SKU is D884TM and the parting tool holder is manufactured by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Clamp Holder for KGMN 200 Indexable Inserts 2mm Edge Width, Left - Teknik Makina
Take advantage of a compact, left‑hand grooving solution that combines stable clamping, precise cutting control and easy insert compatibility; order directly via Metav Werkzeuge or consult our specialists for application advice. Grooving Clamp Holder for KGMN 200 indexable inserts – left‑hand, L125 mm (Teknik Makina) The Grooving Clamp Holder for KGMN 200 indexable inserts is a left‑hand toolholder designed for precision grooving and parting operations on turning centres, offering a compact 125 mm profile for rigid support in confined setups. Left‑hand design for precision grooving 125 mm overall length for stable support 12 mm shank width and height Max parting depth 12 mm, cutting width 2 mm Rigid support and repeatable machining accuracy The holder is engineered to deliver stable clamping during grooving and parting, reducing chatter and improving surface finish. With a 125 mm overall length and a shank cross‑section of 12 mm by 12 mm, the component provides a compact footprint while maintaining rigidity. Compatibility with KGMN 200 indexable inserts means quick tool changes and consistent geometry, supporting high repeatability in short‑run and batch production alike. These characteristics make the holder suitable where space constraints demand a slim yet stiff solution. Secure fixation and simple serviceability Clamping integrity is ensured by a specially sized screw and key combination: M4x12.5 clamping screw operated with a Torx T15 key for accurate torque application and reduced slip. The cutting head width of 12.2 mm and a cutting edge width of 2 mm allow controlled chip formation while the 12 mm maximum parting depth supports a range of grooving profiles. The use of standardised fasteners simplifies maintenance and minimises downtime, which in turn increases machine availability and process reliability. Designed for efficient workshop integration This toolholder emphasises quick integration into existing setups: its ISO designation 1212 and clear compatibility statement with Korloy‑manufactured inserts reduce selection errors and speed ordering. The compact design, modest weight and left‑hand orientation suit operations where ergonomic tool access and machine clearance are essential. For customers seeking practical guidance on application limits or insert grades, Metav Werkzeuge provides technical advice and fast supply from Emmerich, reinforcing trustworthy procurement and a predictable supply chain. Contact Metav Werkzeuge for a technical consultation and fast supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitment and ordering Technical data Article number: D058TM Label: Stechklemmhalter KGMN 200 L125mm Manufacturer: Teknik Makina Core dimensions Overall length: 125 mm Shank width: 12 mm Shank height: 12 mm Cutting head width: 12.2 mm Cutting width: 2 mm Max parting depth: 12 mm Weight: 0.166 kg Clamping screw: M4x12.5 Torx key: T15 Cutting direction: left Compatibility & features Compatible with KGMN 200 indexable inserts Inserts manufacturer: Korloy ISO designation: 1212 Product type: Grooving clamp holder SKU: D058TM FAQ Which inserts fit this holder? The holder is compatible with KGMN 200 indexable inserts; Korloy is specified as the matching insert manufacturer. Is the holder suited for right‑hand machining? This toolholder is manufactured for left‑hand cutting direction and is intended for left‑hand grooving and parting operations. What is the maximum parting depth? The maximum parting depth is 12 mm, combined with a cutting width of 2 mm for precise groove control. Which fastening hardware is required for clamping? Clamping is achieved with an M4x12.5 screw tightened using a Torx T15 key to ensure secure fixation. What is the ISO designation for the shank? The shank carries the ISO designation 1212, which aids in standardised selection and mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Clamp Holder for MGM 150 Indexable Inserts 1.5mm Cut Width, Right-Hand - Teknik Makina
Take advantage of stable clamping, precise compatibility and compact reach to streamline parting and grooving operations; order directly via Metav Werkzeuge or consult the Metav team for installation advice and application matching. Parting clamp holder MGM 150 L125mm – for MGM 150 indexable inserts, 125 mm overall length (Teknik Makina) A Parting clamp holder MGM 150 L125mm designed for secure clamping of MGM 150 indexable inserts in right‑hand parting and grooving applications across industrial turning centres. 125 mm overall length for deep operations Compatible with MGM 150 indexable inserts Maximum cutting depth 14 mm for secure cuts Clamping bar 20 x 20 mm for stable clamping Consistent clamping for repeatable finishes The holder delivers a repeatable clamping interface through its 20 x 20 mm shank profile and ISO 2020 designation, which together ensure a defined seating and minimal play during heavy cuts. Matching with Korloy MGM 150 indexable inserts reduces setup variables and helps maintain consistent surface quality. This combination of a standardised mount and compatible inserts supports predictable tool life and reduces scrap rates in batch production. Compact reach that improves cycle time With an overall length of 125 mm and a tool‑face width of 20 mm, the holder is designed to balance accessibility and rigidity for mid‑depth parting operations. The 14 mm maximum cutting depth and 1.5 mm cutting width are suitable for efficient groove and cut‑off tasks where material removal must be controlled. Fast insert clamping is achieved using the supplied securing screw (M5x20) and a 4 Allen key interface, enabling quick insert changes and reduced machine downtime. Engineered for integration and workshop reliability Manufactured by Teknik Makina, this parting clamp holder is built to fit standard turning tool systems while offering the robustness required in production environments. Its right‑hand cutting orientation and ISO mounting make it straightforward to integrate into existing tool stocks, simplifying inventory and ordering. The robust clamping arrangement is aimed at lowering vibration and improving operator confidence in day‑to‑day turning tasks, contributing to a steadier production flow. Discuss Teknik Makina's parting clamp holder with Metav Werkzeuge to define the best configuration for the workshop and secure reliable delivery from Emmerich. Technical data SKU: D653TM Label: Stechklemmhalter MGM 150 L125mm Product type: Parting clamp holder Manufacturer: Teknik Makina ECLASS: 21181005 Facts Overall length: 125 mm Clamping bar width: 20 mm Clamping bar height: 20 mm Cutting head width: 20 mm Maximum cutting depth: 14 mm Cutting width: 1.5 mm Cutting direction: right Special features Compatible with MGM 150 indexable inserts Suitable for Korloy inserts ISO designation: 2020 Fixing screw: M5x20 Allen key: 4 Allen Category: Klemmhalter FAQ What inserts fit this clamp holder? The parting clamp holder accepts MGM 150 indexable inserts and is specified as compatible with Korloy insert variants. Is the holder suitable for left‑hand cutting? This toolholder is specified for right‑hand cutting; left‑hand operations require a mirrored holder. How deep can this holder cut in a single pass? The maximum cutting depth is 14 mm, which applies to groove or parting cuts under appropriate machine and material conditions. Which screw and key are required to secure the insert? Insert clamping is achieved with the M5x20 securing screw and a 4 Allen key for tightening. Does the holder follow a standard mount? Yes, the holder uses an ISO 2020 shank designation, providing a standardised seating for compatible toolposts and toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Clamp Holder for MGM 300 Indexable Inserts 3mm Cut Width, Left - Teknik Makina
The compact combination of left-hand cutting geometry, a 125 mm overall length and a 20 mm clamping width delivers stable, repeatable grooving and parting performance. Order the parting clamp holder directly via Metav Werkzeuge or consult our experts for application advice. Parting clamp holder MGM 300 L125mm — left-hand, 20 mm clamping width (Teknik Makina) The Parting clamp holder MGM 300 L125mm is a left-hand grooving and parting toolholder designed for indexable insert systems and precision lathe operations Left-hand cutting orientation 125 mm overall length 20 mm clamping width Compatible with Korloy MGM 300 inserts Engineered for accurate grooving and reliable parting The holder is built to convert insert geometry into consistent cut quality: the 20 mm clamping width and ISO 2020 designation ensure secure seating of the indexable insert, while the left-hand orientation supports dedicated machining strategies. With a max grooving depth of 28 mm and a 3 mm cutting width, the design reduces lateral vibration and enables repeatable cuts across production runs. For workshops moving from provisional setups to standardised processes, this holder provides measurable improvements in tool life and surface finish by stabilising the insert under load. Robust clamping and simple serviceability for production environments Fast, reproducible clamping is achieved via the M5x20 clamping screw, which requires a 4 mm Allen key for adjustment. The holder’s 20 × 20 mm head dimensions and 125 mm overall length create a compact profile that still resists bending moments typical in grooving tasks. Maintenance is straightforward: replacement of the indexable insert family is quick when worn, lowering machine downtime and improving throughput. These mechanical choices translate directly into reduced setup variance and higher first-pass yield on batch work. Seamless integration with common insert systems and machine shops Designed for the widely used MGM 300 indexable inserts (Korloy), the toolholder fits established tooling families, cutting inventory complexity. The left-hand cutting configuration suits operations that require counter-directional parting or specific chip flow management. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the holder aligns with industry workflows, making it simple to adopt in manual or CNC lathe setups where predictable performance and compatibility are priorities. For specification advice or to secure supply of Teknik Makina’s parting clamp holder MGM 300 L125mm, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for rapid delivery and technical guidance. Technical data SKU: D614-1TM ECLASS: 21181005 Brand: Teknik Makina Product type: Parting clamp holder Label: Stechklemmhalter MGM 300 L125mm Core dimensions Overall length: 125 mm Clamping width: 20 mm Clamping height: 20 mm Cutting head width: 20 mm Max grooving depth: 28 mm Cutting width: 3 mm Weight: 0.417 kg Design & features Clamping designation ISO: 2020 Cutting direction: left Clamping screw: M5x20 Allen key size: 4 mm Compatible insert manufacturer: Korloy Compatible insert type: MGM 300 indexable inserts FAQ Which inserts fit this holder? The holder is designed for MGM 300 indexable inserts by Korloy and accepts that family without modification, as specified for the parting clamp holder MGM 300 L125mm (SKU D614-1TM). Is this holder only for left-hand cutting operations? Yes, the toolholder has a left-hand cutting orientation and is optimised for applications requiring counter-directional parting or grooving. What is the maximum grooving depth achievable? The maximum grooving depth is 28 mm, enabling deeper parting tasks while maintaining stability. What shank and head dimensions does it use? The holder conforms to an ISO 2020 clamping designation with a 20 × 20 mm head profile and a 125 mm overall length for compact rigidity. Which maintenance tools are required for insert changes? Insert clamping and replacement use an M5x20 clamping screw operated with a 4 mm Allen key; the procedure is straightforward for workshop personnel. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Clamp Holder For MGMN 200 Indexable Inserts, Left Cut, 12mm Width - Teknik Makina
Take advantage of a compact, stable holder engineered for fast insert changes and repeatable parting cuts; its 12 mm shank and 125 mm overall length provide a secure fit in constrained toolposts. Order the parting solution via Metav Werkzeuge or consult our specialists for application advice. Parting tool holder for MGMN 200 indexable inserts — left-hand, 125 mm (Teknik Makina) The parting tool holder for MGMN 200 indexable inserts is designed for precise groove and parting operations on lathes, offering a compact profile and secure clamping for repeatable results in production and jobbing environments Secure clamp for MGMN 200 inserts Left-hand cutting for counterclockwise lathe use 12 mm shank width and 125 mm overall length Compatible with Korloy MGMN 200 inserts Consistent clamp mechanics for reliable parting results The holder delivers a repeatable clamping interface for MGMN 200 inserts, ensuring stable engagement during parting and grooving cycles. With a maximum cutting depth of 12 mm and a cutting-edge width of 2 mm, the system supports narrow-groove operations where positional accuracy and minimal runout are essential. The secure clamp geometry reduces vibration and tool deflection, translating into improved surface finish and longer insert life, which benefits batch production and single-piece manufacturing alike. Quick changeover and standardised fastening for less downtime Fast tooling changes are enabled by the T15 Torx drive and the M4x12.5 screw, allowing indexed insert swaps with common workshop tools. The design follows an ISO 1212 designation for straightforward identification and replacement planning. Compatibility with Korloy MGMN 200 indexable inserts reduces inventory complexity when matching inserts to holders, supporting lean tooling practices and faster set-up in CNC and manual turning cells. Compact dimensions that fit tight toolposts without compromise The holder’s compact cross-section — 12 mm shank width and 12 mm height — combined with a 125 mm overall length and a 12.2 mm cutting-head width, makes it suitable for confined tooling stations. The light mass (approx. 0.166 kg) helps to limit inertial loads while keeping rigidity where it matters, offering a balance between accessibility and stability for workshops with limited turret clearance or when multiple holders must be mounted close together. Suited to modern turning workflows and simple integration Engineered by Teknik Makina, this clamp-type holder supports left-hand cutting operations and integrates into standard turning setups with minimal adjustment. The compact form and standard fastening mean toolroom and production engineers can adopt the holder for specialised parting tasks or incorporate it into modular tooling systems. For complex specifications or unusual machine geometries, technical clarification and machining recommendations are available from Metav Werkzeuge to ensure optimal performance and tool life For procurement and technical guidance on Teknik Makina parting systems, contact Metav Werkzeuge — Metav Werkzeuge, Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 — for tailored advice and fast supply Technical data SKU: D054TM Product type: Parting tool holder Brand: Teknik Makina Compatible inserts: MGMN 200 (Korloy) Cutting direction: Left Facts Overall length: 125 mm Weight: 0.166 kg Shank width: 12 mm Shank height: 12 mm Cutting-head width: 12.2 mm Max parting depth: 12 mm Cutting-edge width: 2 mm Torx key: T15 Torx screw: M4x12.5 Special features ISO designation: 1212 Label: Stechklemmhalter MGMN 200 L125mm Suitable for narrow-groove parting and grooving Compact design for tight toolpost spaces FAQ What inserts fit this parting holder? The parting tool holder is designed for MGMN 200 indexable inserts; compatibility with Korloy MGMN 200 inserts is confirmed for immediate use. Is the holder suitable for left-hand and right-hand turning centres? This holder is configured for left-hand cutting; it is intended for counterclockwise parting operations and should be matched to the machine’s turning direction. Which fastening tools are required for insert changes? Insert clamping and replacement use a T15 Torx key and an M4x12.5 fastening screw as specified for the holder. Can the holder be used in confined turret pockets? The compact 12 mm x 12 mm shank and 125 mm overall length make it well suited to constrained toolpost arrangements while maintaining rigidity. Where to obtain technical assistance for special applications? Metav Werkzeuge can provide application advice and procurement support for the Teknik Makina holder and associated inserts; reference SKU D054TM when enquiring. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Clamp Holder For MGMN 300 Indexable Inserts 3mm Cutting Width, Left - Teknik Makina
Take advantage of a compact, 125 mm toolholder that combines precise clamping with compatibility for MGMN 300 indexable inserts and a left-hand cutting orientation to streamline grooving and parting operations. Order the parting tool holder directly via Metav Werkzeuge or ask their consultants for application advice. Stechklemmhalter – parting tool holder with 125 mm length, left-hand cut (Teknik Makina) The Stechklemmhalter is a dedicated parting tool holder for MGMN 300 indexable inserts, engineered for left-hand grooving and parting operations in turning centres and lathe setups. *Compatible with MGMN 300 inserts *125 mm overall length for deep cuts *Left-hand cutting orientation Precision clamping for consistent parting results The holder delivers repeatable results by combining a rigid ISO 1212 shank form with a secure Torx T15 clamping screw (M4x12.5). This mechanical arrangement minimises vibration at the cutting edge and preserves insert life, so operators benefit from fewer interruptions for tool changes and steadier surface finish. The design supports reliable performance even during demanding cut-off operations, translating into predictable cycle times and less scrap. Clear compatibility and application advantages Designed specifically for MGMN 300 indexable inserts and compatible with Korloy originals, the toolholder simplifies procurement and toolset planning across production lines. The left-hand orientation makes it suitable for jobs where the tool approaches the workpiece from that side, avoiding the need to reconfigure fixtures. With a compact cutting head width of 12.3 mm and a maximum cutting depth of 12 mm, the holder is optimised for standard parting and grooving tasks while remaining compact for tight overhang conditions. Practicality and maintenance in everyday workshop use At only 0.166 kg, the holder is light enough to handle and position quickly yet robust enough for repeated use. The clamping method is straightforward: a single M4x12.5 Torx screw provides a secure seat for the insert, allowing rapid insert replacement and minimal downtime. This ease of service supports higher machine uptime and lower labour overhead for tool changes, which is particularly relevant for small-batch production and maintenance-focused environments. Designed to fit production workflows The combination of a standardised shank profile, proven clamping principle and explicit insert compatibility enables straightforward integration into existing tool assemblies. Procurement teams benefit from the clarity of specification when ordering spares or matching toolholders to machine tool turrets. Operations planners will note the holder’s balance between a compact footprint and functional depth, helping to maintain machining accessibility without sacrificing cutting stability. Contact Metav Werkzeuge for precise ordering and application support on the Teknik Makina parting tool holder compatible with MGMN 300 inserts Technical data Article number: D056TM SKU: D056TM Product type: Stechklemmhalter Brand: Teknik Makina Suitable for inserts: MGMN 300 Facts Overall length: 125 mm Weight: 0.166 kg Holder width: 12 mm Holder height: 12 mm Cutting head width: 12.3 mm Maximum cutting depth: 12 mm Cutting width: 3 mm Screw: M4x12.5 Torx key: T15 Cutting direction: left Special features ISO designation: 1212 Compatible insert manufacturer: Korloy Clamping method: Torx screw Product label: Stechklemmhalter MGMN 300 L125mm Product category: Klemmhalter FAQ What insert type does this holder accept? The holder accepts MGMN 300 indexable inserts; it is specified for that insert family and matches Korloy-compatible geometries. Is the cutting orientation suitable for right-hand operations? This toolholder is configured for left-hand cutting; a right-hand orientation is not provided for this SKU. How is the insert secured in the holder? The insert is clamped with a single Torx screw (M4x12.5) tightened with a T15 key for secure seating and easy replacement. Can this holder be used for deep grooving tasks? With an overall length of 125 mm and a maximum cutting depth of 12 mm, it is suitable for standard deep-grooving and parting tasks within those limits. What is the ISO shank designation for mounting? The shank follows ISO 1212 designation, ensuring compatibility with turrets and tool posts designed for that form. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Clamping Holder for MGM 250 Indexable Inserts 2.5mm Cut Width, Right-Hand - Teknik Makina
Reliable clamping performance and a precise 2.5 mm cutting width enable stable right-hand grooving with minimal vibration; the 125 mm overall length adds rigidity for consistent cycle results. Order the clamp holder directly via Metav Werkzeuge or consult our specialists for compatibility and fast delivery. Grooving clamp holder MGM 250 L125mm – for MGM 250 indexable inserts, right-hand (Teknik Makina) The Grooving clamp holder MGM 250 L125mm is a right-hand toolholder engineered for secure mounting of MGM 250 indexable inserts in production turning and grooving operations Right-hand grooving holder for MGM 250 inserts 125 mm overall length for added rigidity 2.5 mm cutting width for fine grooves Supplied with M5x20 clamping screw and 4 Allen Precision and stability for consistent grooves The holder is designed to deliver repeatable results by combining a 125 mm overall length with a 20 mm clamp profile. The larger clamping area increases stiffness, reducing deflection during cut and improving surface finish and dimensional accuracy. With a 2.5 mm nominal cutting width and a maximum plunge depth of 17 mm, the toolholder supports fine grooving tasks where tight tolerances and repeatability are required. These characteristics translate into fewer reworks and steadier production throughput. Quick setup and secure clamping to minimise downtime Fast, reliable clamping is achieved using the supplied M5x20 clamping screw together with the included 4 Allen key, allowing secure fixation of the indexable insert without additional parts. The holder carries the ISO 2020 designation for insert seat compatibility and is matched to Korloy MGM 250 inserts, ensuring straightforward changeover. A robust clamping interface reduces micro-movements under cutting load, which lowers tool wear and helps maintain cycle times in serial production. Suited for production turning and specialised grooving tasks Engineered for industrial workshop environments, this clamp holder supports right-hand grooving operations on a wide range of lathe setups. Its compact head geometry, with a 20 mm head width, enables access in constrained toolposts while maintaining the stability required for accurate groove profiles. The product suits small-batch toolrooms and larger production cells alike, offering a balance of accessibility and cutting performance that helps maintain machining consistency across repeat cycles. Practical serviceability and compatibility benefits The simple hardware package reduces the need for additional spares on the shop floor: the clamping screw specification and the included Allen key mean immediate readiness after installation. Compatibility with MGM 250 style indexable inserts from Korloy ensures that replacement inserts are readily available, keeping procurement straightforward. Backed by Metav’s distribution and logistics presence in Emmerich, supply continuity supports predictable maintenance planning and steady production supply. For dependable right-hand grooving performance and guaranteed compatibility with MGM 250 indexable inserts, contact Metav Werkzeuge for ordering and technical guidance: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: D655TM Label: Stechklemmhalter MGM 250 L125mm Product type: Grooving clamp holder Manufacturer: Teknik Makina Compatible inserts: MGM 250 (Korloy) Designation: for MGM 250 Indexable Inserts Facts Overall length: 125 mm Clamp width: 20 mm Clamp height: 20 mm Cutting head width: 20 mm Cutting width: 2.5 mm Maximum plunge depth: 17 mm ISO designation: 2020 Direction: right Special features Clamping screw: M5x20 Supplied tool: 4 Allen Compatible with Korloy MGM 250 inserts SKU reference: D655TM FAQ What inserts fit this clamp holder? The clamp holder is designed for MGM 250 indexable inserts and is compatible with inserts from Korloy; the holder follows the ISO 2020 seat specification for a secure fit. Is the toolholder right- or left-hand? This model is a right-hand grooving clamp holder suitable for right-hand cutting directions in turning operations. Which hardware is supplied with the holder? The package includes an M5x20 clamping screw and a 4 Allen key for mounting and secure clamping. What groove depth can be achieved safely? The holder allows a maximum plunge depth of 17 mm, with a recommended cut width of 2.5 mm for precision grooving applications. Can the holder be used in compact toolposts? Yes; the nominal head width of 20 mm is intended for access in confined toolpost arrangements while maintaining clamping stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Holder 12mm Width 2mm Cutting Edge Left Hand, Torx T15/M4x12.5 - Teknik Makina
Take advantage of a compact, ISO‑sized clamping solution that combines a 12 x 12 mm shank, precise 2 mm cutting width and compatibility with ISCAR indexable inserts for reliable parting operations; order directly via Metav Werkzeuge or consult our specialists for application advice. Parting tool holder L125 mm (D062TM) — left‑hand, ISO 12×12 The parting tool holder L125 mm by Teknik Cutting Tools is designed for left‑hand parting and grooving on conventional and CNC lathes, offering a compact 125 mm overall length and ISO 1212 shank dimensions for straightforward toolpost integration. Left‑hand cutting direction Max parting depth 12 mm 12 x 12 mm shank (ISO 1212) Compatible with ISCAR inserts Compact, ISO‑based design for fast tool changes The holder’s 12 x 12 mm shank and ISO designation enable immediate integration into standard toolposts and quick interchangeability across workstations. With an overall length of 125 mm, the profile minimises overhang to reduce vibration and improve finish quality during short to medium parting tasks. The compatibility with ISCAR indexable inserts simplifies inventory and ensures users can rely on proven insert geometries for consistent cutting performance. Stable cutting for controlled parting and grooving Designed around a 2 mm cutting width and a maximum parting depth of 12 mm, this tool holder provides predictable material separation with reduced risk of chatter in narrow groove operations. The left‑hand configuration delivers correct rake and clearance for left‑handed operations without the need for insert modification. Engineers benefit from clearer process planning: known cutting width and depth limit help in calculating feeds and speeds and in choosing suitable insert grades for specific workpiece materials. Workshop practicality and secure clamping Assembly and maintenance are straightforward thanks to the M4x12.5 Torx screw and T15 key interface, which ensures repeatable clamping torque and quick blade changes with standard hand tools. The holder’s low mass of 0.166 kg contributes to reduced toolholder inertia while remaining rigid in the clamping zone, offering a balance between manoeuvrability and stability. The 12.2 mm cutting‑head width accommodates common insert seatings while keeping the tool envelope compact for confined setups. Suitable applications and process integration This holder is geared towards reliable parting and narrow‑grooving tasks on lathes where space is limited and precision is required. It suits production runs and workshop repair work where standardised, ISO‑sized holders and widely available inserts are preferred. The compact geometry allows for close workpiece approaches and effective chip control when paired with appropriate cutting parameters and coolant strategies. Discuss parting requirements with Metav Werkzeuge to ensure the Teknik Cutting Tools parting tool holder L125 mm (SKU D062TM) matches the intended application and to arrange prompt delivery from our Emmerich location Technical data Article number: D062TM Manufacturer: Teknik Cutting Tools Product type: Parting tool holder Brand: Teknik Makina Cutting direction: left ISO designation: 1212 Compatible inserts: ISCAR Core technical figures Overall length: 125 mm Weight: 0.166 kg Max parting depth: 12 mm Cutting width: 2 mm Shank dimensions: 12 x 12 mm Cutting‑head width: 12.2 mm Torx screw: M4x12.5 Torx key: T15 Features & compatibility Left‑hand configuration ISO 1212 shank for standard toolposts Designed for ISCAR indexable inserts SKU: D062TM Category: Clamping holder / parting tool holder FAQ What shank size does the holder use? The holder uses a 12 x 12 mm shank (ISO 1212), suitable for standard toolposts accepting ISO 12×12 toolholders. What is the maximum parting depth achievable? Maximum parting depth is 12 mm, matching the holder’s seat and blade envelope for safe separation operations. Which inserts fit this holder? This holder is compatible with ISCAR indexable inserts that suit a 2 mm cutting width and ISO‑compliant seating. Which screw and key are required for clamping? Clamping uses an M4x12.5 Torx screw secured with a T15 key for consistent tightening and quick insert replacement. Is this holder suitable for CNC and manual lathes? Yes, the compact 125 mm overall length and ISO shank make it suitable for both CNC and conventional lathe setups where left‑hand parting is required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Tool Holder Left 12x12mm Cutting Head 3mm Inserts T15 Torx - Teknik Makina
Take advantage of the combination of rigid clamping, clear compatibility with ISCAR indexable inserts and measurable cutting parameters for reliable parting performance in series production; order the tool directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Parting clamp holder L125 mm (D064TM) — left‑hand, compatible with ISCAR inserts (Teknik Makina) The Parting clamp holder L125 mm is a left‑hand turning tool holder designed for secure parting and grooving on production lathes and workshop turning centres. Left‑hand parting orientation 12 x 12 mm square shank Compatible with ISCAR inserts Maximum parting depth 12 mm Cutting width 3 mm Engineered for consistent, measurable parting performance The holder is built to deliver consistent rigidity and repeatable results in short‑cycle parting operations. With an overall length of 125 mm and a compact square shank of 12 x 12 mm, the tool offers a low overhang that reduces vibration and improves surface finish. The specification for maximum parting depth 12 mm and a cutting width of 3 mm provides clear operational limits so process planners can calculate feeds, speeds and cycle times with confidence. This measurable data supports efficiency gains and predictable tool life in series production. Secure clamping and simple assembly reduce downtime Clamping design and fastenings are decisive for reliable cutting. The holder features a dedicated clamp geometry and a Torx screw (M4x12.5) secured with a T15 key, enabling secure seat retention and straightforward reassembly during insert changes. The ISO designation 1212 describes the interface geometry for the clamping element, giving workshop engineers a direct reference for torque and mounting procedures. Together, these elements minimise incidents of insert movement and therefore reduce scrap and rework—directly supporting uptime and process stability. Compatibility tailored to indexable inserts and common turning workflows Designed to accept indexable inserts from ISCAR, the holder fits established insert geometries used for parting and grooving operations. Compatibility with an industry supplier streamlines spare‑parts management and reduces the number of special items carried in stock. The left‑hand orientation is specified for operations where the tool must cut towards the operator or in dedicated left‑hand spindle setups; this orientation should be selected to match machine rotation and intended cut direction. The clear statement of compatibility simplifies procurement and prevents mismatches on the shop floor. Practical advantages for the workshop and production floor Lightweight yet robust, the holder’s mass of 0.166 kg allows quick handling and rapid tool exchanges without compromising stability. The compact cutting‑head width of 12.3 mm maintains a slim profile for close‑quarter operations while the overall construction supports modest overhangs in confined setups. For production planners, the combination of known dimensions and standard fastenings reduces setup time and eases integration into tool libraries and CAM routines. The result is a pragmatic improvement in process reliability rather than speculative claims. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina parting clamp holder D064TM — technical consultants at Metav Werkzeuge will assist with machining parameters and supply from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D064TM ECLASS: 21181005 Label: Stechklemmhalter L125mm Manufacturer: Teknik Makina Facts Overall length: 125 mm Weight: 0.166 kg Shank width: 12 mm Shank height: 12 mm Cutting‑head width: 12.3 mm Maximum parting depth: 12 mm Cutting width: 3 mm Special features Product type: Parting clamp holder ISO designation: 1212 Cutting direction: left Compatible with ISCAR indexable inserts Torx key: T15 Torx screw: M4x12.5 FAQ What insert brands fit this parting clamp holder? The holder is specified to be compatible with ISCAR indexable inserts; the Teknik Makina parting clamp holder D064TM is designed for standard ISCAR insert geometries. Which cutting direction does the tool support? This tool is manufactured for left‑hand cutting direction; select the left‑hand holder for operations that require cutting towards the operator or on machines with the appropriate spindle rotation. How deep can the parting cut be with this holder? The maximum specified parting depth for this holder is 12 mm, allowing planners to calculate safe depth‑of‑cut and choose suitable insert grades. What are the shank dimensions and why do they matter? The shank measures 12 x 12 mm, providing a compact profile that reduces overhang and vibration, which contributes to improved surface finish and longer insert life. Which fastenings are used for the clamping screw? Clamping is secured with a Torx screw M4x12.5, tightened with a T15 Torx key for consistent torque and secure insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Grooving Toolholder 20x20mm Cutting Width 3mm Left-Hand Max 18mm - Teknik Makina
Take advantage of precise left-hand parting with a compact, stable 125 mm holder: its 20 × 20 mm ISO shank and 3 mm cutting width deliver controlled groove formation and repeatable set-ups. Order the parting tool holder directly via Metav Werkzeuge or ask their technical consultants for application advice. Parting tool holder L125 mm — 20 × 20 mm shank, 3 mm cut (Teknik Makina) A Parting tool holder L125 mm for left-hand grooving and controlled parting operations on standard lathe tool posts Left-hand orientation for controlled parting 20 × 20 mm square shank for secure clamping 3 mm cutting width for narrow grooves 125 mm overall length for stable setups Consistent left-hand parting for controlled grooves A left-orientated design provides predictable chip flow and safer engagement in parting operations. The holder is specified for left-hand cutting, with a 3 mm cutting width and an 18 mm maximum plunge depth, which together enable narrow slotting and confident, incremental plunges without excessive overhang. For workshops moving from trial setups to serial runs, the geometry reduces the need for repeated adjustments and supports repeatable results. The compact profile helps maintain rigidity while performing slender cuts. Secure clamping and quick tool changes for productivity Built to the ISO 2020 dimension, the clamp accepts a 20 × 20 mm shank for a snug fit in common tool posts. Clamping uses an M5x20 screw and is tightened with a 4 mm Allen key, allowing rapid, repeatable retention without specialised fixtures. The 125 mm overall length balances accessibility with stability on the cross slide, helping to minimise deflection during engagement. These features shorten set-up time and reduce downtime between operations, which benefits shops focused on throughput and consistent part quality. Practical fit for general workshop and precision tasks Designed as a straightforward solution for parting and grooving, the holder suits conventional lathe applications where space is limited but accuracy remains important. The ISO 2020 designation ensures compatibility with a broad range of tool posts and holders, making integration straightforward. Identification for stock and reorders is provided via SKU D886TM, which simplifies procurement and inventory tracking. The solid, no-frills design supports both one-off adjustments and repetitive production without introducing complexity. For reliable left-hand parting performance and supply of the Teknik Makina D886TM parting tool holder, contact Metav Werkzeuge for availability and application guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D886TM Label: Stechklemmhalter L125mm Manufacturer: Teknik Makina Product type: Parting tool holder Facts Overall length: 125 mm Weight: 0.398 kg Clamp width: 20 mm Clamp height: 20 mm Cutting-head width: 20 mm Cutting width: 3 mm Maximum plunge depth: 18 mm ISO designation: 2020 Clamping screw: M5x20 Allen key size: 4 mm ECLASS: 21181005 SKU: D886TM UID: D886TM Special features Left-hand cutting direction ISO 2020 square shank (20 × 20 mm) Compact 125 mm overall length Robust clamping via M5x20 screw FAQ What cutting direction does the holder use? The holder is specified for left-hand cutting and is designed to perform left-oriented grooving and parting operations. What is the maximum plunge depth for this holder? The maximum plunge depth is 18 mm for the D886TM parting tool holder. Which shank and tool post standard does this holder fit? The holder conforms to ISO 2020 and accepts a 20 × 20 mm square shank for compatibility with standard tool posts. What clamping screw and wrench are required? Clamping is performed with an M5x20 screw and requires a 4 mm Allen key for tightening. Is this holder suitable for narrow grooves and fine parting? Yes, the 3 mm cutting width and the holder’s rigidity make it suitable for narrow grooves and precision parting tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Steady Clamp Holder for MGM 150 Indexable Inserts 1.5mm Cut Width, 14mm Max Depth, Right-Hand - Teknik Makina
Take advantage of the combination of robust clamping, compact dimensions and simple servicing for uninterrupted parting and grooving operations; order the component directly via Metav Werkzeuge or ask their consultants for application advice. Parting clamp holder MGM 150 L125mm – right‑hand, 125 mm overall length, for MGM 150 indexable inserts (Teknik Makina) Parting clamp holder MGM 150 L125mm is a precision clamp holder designed for right‑hand parting and grooving applications, compatible with MGM 150 indexable inserts and optimised for compact lathe tool posts. Compatible with MGM 150 indexable inserts 125 mm overall length for compact setups Max grooving depth 14 mm Right‑hand orientation for standard turning Built for secure, vibration‑resistant cutting The clamp body delivers consistent rigidity through its compact 12 x 12 mm section and a 125 mm overall length, which helps to reduce chatter during cut‑off and grooving operations. The rigid design improves tool life and surface finish by keeping the insert in a stable position; indexable inserts can therefore be used to their full life, lowering tooling costs per component. The short, stiff geometry also eases setup in small tool posts without sacrificing cutting stability. Fast insert changes and reliable clamping to cut downtime A simple clamping concept with an M5x16 clamping screw permits quick insert replacement and secure retention of the cutting tip. The assembly uses a 4 Allen key for tightening, enabling rapid interventions at the machine and reducing non-productive time. With a maximum grooving depth of 14 mm and a cutting width of 1.5 mm, the holder is suitable for precise parting and narrow‑groove operations where repeatable clamping force is essential for consistent cycle times. Compact form factor that fits tight setups The 12 mm section and 12 mm cutting head width make the holder particularly suitable for compact tool posts and multi‑tool turrets where space is at a premium. The right‑hand cutting orientation is matched to standard turning directions and facilitates straightforward insertion into existing turret stations. The ISO designation 1212 identifies the holder interface and simplifies integration into tool lists and assembly drawings. Practical compatibility and clear specification for workshop planning Marked compatibility with MGM 150 inserts and proven fit for Korloy insert variants streamlines inventory management and procurement decisions. The ISO designation and the clear dimensional data (125 mm overall length, 12 mm clamp width/height, 1.5 mm cut width) support planning for set‑ups and fixture design, enabling predictable tool performance and fewer trial cuts during process development. Contact Metav Werkzeuge to arrange supply of this Teknik Makina parting clamp holder (SKU D651TM) and to receive tailored mounting guidance and stock availability from the Emmerich team Technical data SKU: D651TM Label: Stechklemmhalter MGM 150 L125mm Manufacturer: Teknik Makina eClass: 21181005 Facts Overall length: 125 mm Clamp width: 12 mm Clamp height: 12 mm Cutting head width: 12 mm Cutting width: 1.5 mm Max grooving depth: 14 mm Screw: M5x16 ISO designation: 1212 Direction: right Materials & compatibility Compatible with MGM 150 indexable inserts Suitable for Korloy inserts Allen key size: 4 Allen FAQ Which inserts are compatible with this clamp holder? The holder accepts MGM 150 indexable inserts; Korloy‑branded MGM 150 types are listed as compatible for straightforward procurement. What is the maximum grooving depth achievable? The maximum grooving depth is 14 mm, allowing the holder to perform standard parting and narrow‑groove tasks reliably. Which fastening hardware is required for insert changes? Insert clamping is achieved with an M5x16 screw and a 4 Allen key, enabling quick and repeatable insert changes. Is the holder suitable for small tool posts and turrets? Yes; the compact 12 x 12 mm cross‑section and 125 mm overall length make it suitable for confined tool posts and multi‑tool turrets. What cutting width does the holder support? The nominal cutting width is 1.5 mm, appropriate for fine grooving and precise parting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Steadyholder for MGMN 300 Indexable Inserts 3mm Cutting Width, Left - Teknik Makina
Combine robust clamping with a compact 125 mm overall length and precise left-hand cutting to ensure reliable grooving operations. Order the grooving clamp holder directly via Metav Werkzeuge or consult our specialists for application advice. Grooving clamp holder for MGMN 300 indexable inserts — 125 mm, left-hand (Teknik Makina) Grooving clamp holder for MGMN 300 indexable inserts, engineered for compact setups and repeatable left-hand grooving operations For MGMN 300 indexable inserts Left-hand cutting orientation 125 mm overall length for compact setups Precise clamping for repeatable grooving results The grooving clamp holder is engineered to secure MGMN 300 indexable inserts with high rigidity, providing consistent tool positioning across repeated cycles. The clamping width 16 mm and ISO designation 1616 define a compact shank geometry that reduces deflection during grooving and cut-off operations. For manufacturers and job shops that require predictable component tolerances, the combination of a stable holder and standardised insert format helps to maintain surface finish and dimensional accuracy while minimising rework. Fast insert changes and secure fixation reduce downtime Designed for straightforward maintenance, the holder uses an M4x12.5 Torx screw and a T15 key for positive insert clamping, enabling quick indexable insert replacement and short tool-change intervals. The cutting width 3 mm and a maximum grooving depth of 16 mm allow controlled material removal in narrow grooves, while the cutting head width 16.3 mm gives clearance for chip flow and coolant access where applicable. Compatibility with Korloy-manufactured inserts broadens sourcing options and supports efficient inventory management for production environments. Compact left-hand design suited to restricted toolposts With a 125 mm overall length and a tool weight of approximately 0.267 kg, this holder is well suited to tight setups where overhang must be kept to a minimum. The left-hand orientation supports specific turning and grooving programmes and is beneficial where toolpath geometry or machine configuration demands a left-hand approach. For applications in small-batch production or repair work, the compact dimensions and standardised interface translate into easier handling, reduced vibration and improved repeatability on parts requiring narrow grooves. For reliable left-hand grooving choose the Teknik Cutting Tools holder and get tailored advice or place orders through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for detailed specification support Technical data SKU: D057TM Label: Grooving clamp holder MGMN 300 L125mm Product type: Grooving clamp holder Manufacturer: Teknik Makina Facts Overall length: 125 mm Weight: 0.267 kg Clamp width: 16 mm Holder height: 16 mm Cutting head width: 16.3 mm Cutting width: 3 mm Max grooving depth: 16 mm ISO designation: 1616 Special features Compatible with MGMN 300 inserts Compatible insert manufacturer: Korloy Cutting direction: left Torx screw: M4x12.5 Torx key: T15 FAQ What insert type fits this holder? The grooving clamp holder accepts MGMN 300 indexable inserts, specified for narrow-grooving and cut-off tasks in this holder. Is the holder compatible with Korloy inserts? Yes, the holder is compatible with Korloy-manufactured inserts; the design supports standard MGMN 300 geometries. Which screw and key are required for clamping? Clamping is secured with an M4x12.5 Torx screw, tightened using a T15 Torx key for reliable fixation. What is the maximum grooving depth? The holder allows a maximum grooving depth of 16 mm, suitable for many narrow-groove applications. Is this a left-hand or right-hand holder? This is a left-hand grooving clamp holder (SKU D057TM), designed for left-hand cutting orientations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Stech Clamp Holder for MGMN 200 Indexable Inserts 16mm Width, Left-Hand - Teknik Makina
Take advantage of a compact, compatibility-focused solution that combines reliable clamping, precise parting capability and straightforward installation. The holder’s 16 x 16 mm shank and 125 mm overall length deliver consistent set-up on standard toolposts while compatibility with MGMN 200 indexable inserts ensures predictable machining results — order or consult Metav Werkzeuge for assistance. Parting toolholder for MGMN 200 — left-hand, 125 mm by Teknik Makina A parting toolholder for MGMN 200 indexable inserts engineered for left-hand parting operations in turning applications, designed to fit standard 16 x 16 mm toolposts. Compatible with MGMN 200 indexable inserts Left-hand parting for lathe operations Shank size 16 x 16 mm (ISO 1616) Max parting depth 16 mm Precision clamping for repeatable parting results The holder is built to provide a secure clamp for MGMN 200 style inserts, which are commonly used for narrow parting and grooving tasks. Thanks to the 16 x 16 mm shank (ISO 1616) and a compact head width of 16.2 mm, the device delivers a stable tool position that reduces deflection during cut-off. The left-hand orientation and 2 mm cutting width specification make it suitable for controlled, narrow groove machining. These features translate directly into fewer rejects and a steadier process when fitting the tool to a compatible toolpost. Faster setup, clear compatibility and reliable fixation Setup is simplified by the standard ISO 1616 clamping geometry and the Torx fixation system. The toolholder uses a Torx T15 key and an M4x12.5 Torx screw for secure insert retention, which speeds changeovers and lowers downtime. A modest mass of 0.267 kg keeps balance on the turret without adding unnecessary inertia, while the 125 mm overall length offers good reach for most lathes without compromising rigidity. The combination of standardised interfaces and robust fastening yields measurable time savings in repetitive production tasks. Application guidance and material suitability This holder is matched to MGMN 200 inserts from established manufacturers such as Korloy, making it a pragmatic choice for general parting and grooving in a range of ferrous and non-ferrous turning operations. The maximum parting depth of 16 mm and narrow 2 mm cutting width are intended for precise cut-off work rather than heavy-duty roughing; they are best employed where dimensional control and minimal material waste are priorities. The compact head profile supports access to confined geometries while maintaining a stable clamping arrangement. For availability, technical clarification or to source the Teknik Makina parting toolholder D055TM directly from Metav Werkzeuge, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and ordering guidance Technical data SKU: D055TM Product: Parting toolholder for MGMN 200 indexable inserts Brand: Teknik Makina Facts Overall length: 125 mm Weight: 0.267 kg Shank width x height: 16 x 16 mm (ISO 1616) Cutting head width: 16.2 mm Max parting depth: 16 mm Cutting width: 2 mm Direction: left Torx key: T15 Torx screw: M4x12.5 Special features Compatible with MGMN 200 indexable inserts Compatible insert manufacturer: Korloy Clamp-type insert holder ISO designation: 1616 Compact head for restricted access FAQ Which inserts fit this parting toolholder? The parting toolholder is designed for MGMN 200 indexable inserts; compatible grades from Korloy are commonly used with the holder D055TM. What is the maximum cutting depth for this holder? The maximum parting depth for the holder is 16 mm, suitable for controlled cut-off operations where depth is limited by the insert geometry. Which shank size is required on the turret? This holder requires a 16 x 16 mm toolpost or turret slot (ISO 1616) to ensure correct seating and clamping. How is the insert fastened in the holder? Insert retention is achieved with a Torx screw specification M4x12.5, tightened with a T15 Torx key to provide secure fixation and quick insert changes. Is this holder suitable for heavy roughing? The holder is optimised for precise parting and grooving with a 2 mm cutting width and is not intended as a heavy-duty roughing tool; it is best applied where dimensional control and minimal clearance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Stech Clamping Holder for MGM 150 Indexable Inserts 1.5mm Cut Width, Right - Teknik Makina
Combining a 16 x 16 mm shank, 125 mm overall length and compatibility with MGM 150 indexable inserts, this grooving clamp holder delivers secure clamping and repeatable groove geometry for routine production. Benefit from a narrow 1.5 mm cutting width and a maximum 14 mm grooving depth to handle precision parting and grooving tasks. Order the holder directly via Metav Werkzeuge or ask our consultants if needed. Grooving clamp holder MGM 150 L125mm – 16 x 16 mm shank, 125 mm overall length (Teknik Makina) The Grooving clamp holder MGM 150 L125mm is a right-hand grooving and parting clamp holder intended for use with MGM 150 indexable inserts, designed to provide a compact, rigid mounting solution for workshop lathes and small turning centres. *Stable 16 x 16 mm shank for secure mounting *125 mm overall length for deep reach *Compatible with MGM 150 indexable inserts *Right-hand cutting with 1.5 mm cutting width Secure mounting that improves edge consistency The holder’s 16 x 16 mm shank and ISO 1616 designation ensure a compact, stable interface with the tool post, reducing deflection during cutting. This rigidity contributes directly to consistent edge quality and longer insert life, particularly when working in narrow grooves. By fixing the insert with a robust M5x16 clamping screw and a 4 mm Allen key, the assembly minimises micro-movements that can cause chatter; the result is repeatable parting and groove profiles with fewer rejects and less rework. Efficient right-hand grooving for controlled chip formation Designed for right-hand cutting operations, the clamp holder supports a 1.5 mm cut width and a maximum grooving depth of 14 mm, making it suitable for fine parting and medium-depth grooving tasks. The compact cutting head width of 16 mm accommodates tight toolpaths while maintaining chip control. These measurable characteristics translate into practical production benefits: faster cycle times, predictable cutting forces and reduced setup adjustments when switching between similar jobs. Quick insert interchange and compatibility with standard inserts Compatibility with MGM 150 indexable inserts and recognised insert manufacturers such as Korloy simplifies purchasing and tool management. The clamping concept allows straightforward insert replacement without special fixtures, reducing machine downtime. For workshops managing multiple tool holders, this modular approach supports lean tooling strategies and keeps tool inventories standardised while preserving cutting performance. Built for small-batch flexibility and series production alike Whether used in single-machine workshops or integrated into a larger cell, this clamp holder balances accessibility with industrial robustness. The overall 125 mm length provides the reach needed for deeper grooves while the narrow cutting geometry supports high-precision finishes. For production planners, the holder offers a dependable option to maintain throughput without complex adjustments, supporting a predictable machining workflow and lower scrap rates. For reliable right-hand grooving choose Teknik Makina’s grooving clamp holder and contact Metav Werkzeuge in Emmerich for expert advice or to secure immediate supply from our European warehouse. Technical data Article number: D652TM Manufacturer: Teknik Makina Product type: Grooving clamp holder Compatibility: MGM 150 indexable inserts Compatible insert manufacturer: Korloy Facts Overall length: 125 mm Shank dimensions: 16 x 16 mm Cutting width: 1.5 mm Maximum grooving depth: 14 mm Cutting direction: right Clamping screw: M5x16 Allen key: 4 mm Special features ISO designation: 1616 Cutting head width: 16 mm SKU: D652TM Right-hand grooving configuration FAQ Which inserts fit this clamp holder? The holder is designed for MGM 150 indexable inserts and is compatible with inserts from manufacturers such as Korloy; the interface follows the MGM 150 geometry. What is the maximum groove depth achievable? The maximum grooving depth for this clamp holder is 14 mm, enabling medium-depth parting and grooving operations within that limit. What shank size is required for the tool post? The clamp holder uses a 16 x 16 mm shank, providing a compact and stable mounting for standard tool posts that accept 16 mm shanks. How is the insert secured in the holder? An M5x16 clamping screw secures the insert, tightened with a 4 mm Allen key to ensure firm clamping and minimal vibration during cutting. Is the holder suitable for left-hand cutting or only right-hand? This specific configuration is set up for right-hand cutting; left-hand operations would require a corresponding left-hand holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Stech Cut-Off Holder 2mm Cut Width, 12mm Head Width, 16mm Max Depth, 158g, For 2C DGN Inserts, Right-Handed - Teknik Makina
Reliable right-hand parting with ISO 1212 compatibility and a compact 12 mm profile delivers repeatable, low-vibration cuts; benefit from a maximum 16 mm cutting depth and secure clamping for efficient parting operations — order or request application advice via Metav Werkzeuge. Stechklemmhalter — Right-hand parting and grooving holder with ISO 1212 seat (Teknik Makina) The Stechklemmhalter is a right-hand parting and grooving holder designed for use with 2C DGN indexable inserts, offering a compact footprint for precision metalcutting tasks. Right-hand cutting direction Compatible with ISCAR 2C DGN inserts Max cutting depth 16 mm Compact 12 mm shank height Reliable, repeatable parting for production environments The compact toolholder delivers consistent parting accuracy by combining a precision ISO seat with a secure clamping concept. The ISO 1212 datum and the 2C DGN insert interface ensure correct positioning of the insert, which reduces setup variation and shortens cycle-to-cycle deviation. For production workshops this translates into fewer rejects and a more predictable process, since correct insert seating directly affects cut geometry and tool life. Reduced vibration and improved finish through compact design A small cross-section and modest mass contribute to a stable machining setup. With a shank and head width of 12 mm and a weight of 0.158 kg, the holder reduces overhang and helps to dampen chatter during parting and narrow-groove operations. The reduced vibration improves surface finish and extends insert life, which lowers tooling costs over many runs — particularly on automated lathes and bar-feed machines where repeatability is essential. Designed for efficient integration and easy mounting The holder accepts indexable inserts in the 2C DGN format and mates with a bore designated 2C-R DGN, simplifying tool assembly and replacement. A maximum cutting depth of 16 mm permits deeper parting where required while the narrow 2 mm insert cutting edge supports fine-detail cuts. The right-hand cutting direction and ISO-compliant interface mean fast retrofitting into existing tool posts and straightforward interchangeability across similar setups. For precision parting and grooving solutions, choose Teknik Makina’s Stechklemmhalter and contact Metav Werkzeuge for application guidance and reliable supply — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D750TM Manufacturer: Teknik Makina Product name: Stechklemmhalter Compatible inserts: 2C DGN (ISCAR) Facts Shank height: 12 mm Cutting-head width: 12 mm Overall width: 12 mm Insert cutting width: 2 mm Max cutting depth: 16 mm Overall length: 125 mm Weight: 0.158 kg Cutting direction: right Special features ISO designation: 1212 Toolholder bore: 2C-R DGN Suitable for indexable inserts: 2C DGN Files included: 2 attachments FAQ Which inserts fit this holder most effectively? The holder is configured for 2C DGN indexable inserts and is compatible with inserts from ISCAR; the ISO 1212 seat secures correct positioning for reliable cutting. What is the maximum parting depth achievable? The maximum recommended cutting depth is 16 mm, allowing for deeper parting and grooving when process parameters are set accordingly. Is this holder for right- or left-hand cutting? This design is a right-hand parting and grooving holder; the cutting direction is configured for conventional right-hand toolpaths. What are the key dimensions and weight? Key dimensions include a 12 mm shank/head width, 125 mm overall length and a mass of 0.158 kg, offering a compact, low-overhang solution. How does the holder improve tool life and surface finish? The compact 12 mm profile and accurate ISO seating reduce tool overhang and vibration, which improves surface finish and extends insert life in repetitive parting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Stechklemmhalter 2020 4C-123 SDV-R For Sandvik Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Reliable parting performance with a 4 mm cutting width and a 20 x 20 mm shank delivers consistent cycle times and reduced scrap; compatibility with Sandvik inserts simplifies inventory. Order the holder directly via Metav Werkzeuge or request application advice from their consultants. Stechklemmhalter D908TM — Right‑hand parting and grooving tool holder with 20 x 20 mm shank A Stechklemmhalter D908TM designed for right‑hand parting and grooving in lathe operations, offering a compact 125 mm overall length for workshop use Right‑hand cutting direction 20 x 20 mm shank (ISO 2020) Compatible with Sandvik inserts Max parting depth 18 mm Precise parting that reduces rework and cycle time The holder is engineered for repeatable parting operations: the 4 mm cutting width and 18 mm maximum parting depth provide a balance between material removal and tool life, making it suitable for short to medium series production. As a right‑hand cutting tool holder, it is intended for conventional turning set‑ups where controlled chip formation and predictable forces are essential. The combination of cut geometry and clamping stability helps to reduce vibrations and minimise rework, supporting efficient shopfloor throughput. Standardised interface for fast changeovers Aided by a 20 x 20 mm shank and the ISO 2020 designation, the holder fits common tool posts and quick‑change systems, allowing easy integration into existing setups. Compatibility with Sandvik‑compatible indexable inserts keeps tooling inventories lean and reduces downtime during changeovers. The internal designation shown as 4C‑123 SDV‑R clarifies the holder family and mounting style for planners and tooling managers, ensuring straightforward procurement and replacement planning. Compact, robust build for everyday workshop demands With an overall length of 125 mm and a mass of 0.415 kg, the holder combines a compact footprint with sufficient rigidity for typical parting and grooving tasks. The 20 mm head width and 20 mm shank height contribute to secure clamping and predictable cutting forces, which supports longer insert life and consistent surface quality. Designed for pragmatic workshop use, the construction helps to maintain stable cutting conditions across repeated cycles and varied batches, thus supporting dependable production planning. For precision parting tasks, select the Teknik Makina holder and contact Metav Werkzeuge for tailored application advice or to arrange supply directly through their Emmerich service team Technical Data Article number: D908TM Manufacturer: Teknik Makina Overall length: 125 mm Weight: 0.415 kg Core dimensions Shank height: 20 mm Shank width: 20 mm Cutting head width: 20 mm Cutting width: 4 mm Max parting depth: 18 mm Cutting direction: Right‑hand Compatibility and designation ISO shank designation: 2020 Compatible with Sandvik inserts Toolholder designation: 4C-123 SDV-R FAQ What materials is this holder suitable for? The Stechklemmhalter D908TM is intended for general turning and parting tasks; material suitability depends on the chosen insert grade, with the holder compatible with Sandvik inserts to cover a wide range of steels and non‑ferrous materials. Which shank and mounting standards does the holder follow? The toolholder uses a 20 x 20 mm shank in the ISO 2020 format and the internal designation 4C‑123 SDV‑R clarifies the mounting family for workshop planners. Can the D908TM be used with standard Sandvik indexable inserts? Yes, the holder is Sandvik‑compatible, enabling the use of common insert geometries and grades to match the cutting application and material. What is the maximum parting depth achievable with this holder? The maximum recommended parting depth for the D908TM is 18 mm, which balances effective chip evacuation and mechanical rigidity for most parting operations. Is the D908TM suitable for high‑volume production? The holder is designed for reliable, repetitive parting tasks; combined with appropriate insert selection and process control, it supports stable throughput in small to medium production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Stechklemmhalter 2mm Cut Width, 3.5mm Max Insert Depth, ISO 2020, Fits Korloy 2C KGMN Inserts, Neutral Cutting - Teknik Makina
Take advantage of the combination of compact dimensions, precise parting capability and broad insert compatibility for reliable, repeatable parting operations; order directly via Metav Werkzeuge or ask for technical advice to ensure the holder meets specific machining needs. Parting clamp holder — 20 x 20 mm shank, for Korloy 2C KGMN inserts (Teknik Makina) Parting clamp holder designed for precision parting and grooving operations in general turning applications, compatible with Korloy 2C KGMN indexable inserts. 20 x 20 mm square shank Compatible with Korloy 2C KGMN inserts 2 mm cutting width for accurate parting 125 mm overall length for stable setup Precise parting where consistency matters The 20 x 20 mm shank and compact overall length of 125 mm deliver a stable, low-vibration tool setup that supports repeatable parting cycles. With a cutting width of 2 mm and a maximum plunge depth of 3.5 mm, the holder is engineered for controlled material separation and narrow-groove machining, reducing rework and scrap. The neutral cutting direction provides flexibility for a range of turning centres and lathe orientations, which helps maintain cycle time consistency across different components. Secure clamping and robust geometry for repeatable results A clamping head width of 23.5 mm and a secure insert pocket ensure firm seating of indexable inserts, so cutting forces are transmitted reliably into the tool body. The nominal tool mass (0.412 kg) contributes to a balanced feel during setup while still damping chatter on shorter overhangs. The ISO shank designation 2020 relates directly to the toolholder geometry, simplifying selection when matching turret pockets or toolpost adapters on standard machine interfaces. Broad compatibility to simplify tooling inventory Designed for use with the Korloy insert family 2C KGMN, the toolholder accepts the commonly used insert format for parting/grooving, allowing straightforward replacement and quick reconditioning. The holder’s specification line reference 2C KGEVR-KGMN indicates the compatible bar and insert combinations, enabling rapid sourcing of spare inserts and reducing machine downtime. Choosing a holder compatible with established insert types streamlines procurement and inventory management in the workshop. Practical benefits for workshop workflows By combining a compact shank, secure clamping and a narrow cutting width, the toolholder supports precision finishing passes and controlled parting operations that contribute to higher first-pass yields. The neutral cutting direction enhances adaptability across setups and the straightforward geometry reduces the need for special fixturing. For teams aiming to maintain throughput without sacrificing surface quality, this holder offers a pragmatic balance between rigidity and versatility. For technical guidance on integrating this Teknik Makina parting clamp holder into production workflows, contact Metav Werkzeuge for tailored advice and prompt supply: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D622TM Manufacturer: Teknik Makina Designation: Parting clamp holder Facts Shank width: 20 mm Shank height: 20 mm Cutting head width: 23.5 mm Cutting width: 2 mm Max plunge depth: 3.5 mm Overall length: 125 mm Diameter: 120 Weight: 0.412 kg Cutting direction: neutral Special features Compatible with Korloy 2C KGMN inserts ISO shank designation: 2020 Bar reference: 2C KGEVR-KGMN Compact design for reduced vibration FAQ Which inserts fit this holder? The holder is specified for Korloy 2C KGMN indexable inserts; the bar reference 2C KGEVR-KGMN indicates compatible insert/bar pairings. What are the key dimensions to check for turret fitment? Relevant dimensions are the 20 x 20 mm shank, overall length 125 mm and cutting head width 23.5 mm to ensure correct seating and clearance in standard tool posts. What maximum cutting depth can be achieved? The toolholder supports a maximum plunge depth of 3.5 mm, suitable for narrow parting and groove operations that require tight control. Is the cutting direction fixed or variable? The holder is specified with a neutral cutting direction, giving flexibility for different lathe orientations and standard parting setups. How does the toolholder assist in reducing scrap and rework? By providing a stable shank and precise 2 mm cutting width, the holder enables controlled parting with reduced deflection, which improves first-pass success and decreases the need for corrective machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Stechklemmhalter 2mm Cutting Width, 16mm Max StechDepth, 12x12mm ISO 1212, For 3C TD Inserts, Right-Hand Cutting, Innenkühlung - Teknik Makina
Benefit from a compact, rigid design that combines a 12 mm head, a 2 mm cutting width and a precise right-hand cutting orientation to deliver consistent narrow-grooving results. Order supply via Metav Werkzeuge or consult their advisors for application matching and prompt delivery. Parting Tool Holder D718TM by Teknik Makina — 12 mm head, right-hand The Parting Tool Holder D718TM is a right-hand parting and grooving clamping holder designed for indexable inserts and short overhang turning tasks, offering secure clamping and narrow-groove capability in workshop and production environments. 12 mm head width and height 2 mm cutting width for narrow grooves Right-hand cutting orientation Compatible with Taegutec 3C TD inserts Consistent, narrow-grooving performance for production turning The D718TM holder delivers repeatable results thanks to its 2 mm cutting width and a maximum plunge depth of 16 mm, which together allow efficient parting and fine-grooving with minimal rework. The 12 mm head provides a short tool overhang and increased rigidity, reducing vibration and improving surface finish when used with indexable inserts. Compatibility with Taegutec 3C TD grades ensures a broad choice of chipbreakers and edge designs; ISO 1212 designation clarifies the seat and geometry for correct insert seating. In practice, this combination reduces cycle time by keeping tool deflection low and chip control predictable. Fast set-up and secure clamping keep machines productive The holder’s clamping arrangement, matched to the 3C-R TD bar designation, allows straightforward insert seating and positive clamping, which shortens setup intervals on lathes and turning centres. With an overall length of 125 mm and a mass of 0.16 kg, the tool balances accessibility and stability for typical toolpost or turret mounts. Secure clamping minimises insert movement under cutting forces, lowering tool-change frequency and improving first-pass yield. For shops transitioning between batch sizes, the reduced downtime associated with quick clamping and standardised insert interfaces translates directly into higher throughput. Versatile workshop use and assurance from a trusted supplier Designed for narrow parting and grooving tasks, the holder suits toolrooms and industrial workshops that require precision on small diameters or where space on the turret is limited. The D718TM supports standard 3C TD indexable inserts from Taegutec, which are available in a range of grades for steel, stainless materials and other alloys; this makes the holder a pragmatic choice for mixed-production environments. Metav’s presence in Emmerich acts as a local supply and quality filter: with a broad product range and longstanding customer trust, the distributor simplifies procurement and ensures consistent availability for routine and special orders. Choose the Teknik Cutting Tools Parting Tool Holder D718TM for reliable narrow-grooving performance and arrange supply or technical advice through Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: D718TM Manufacturer: Teknik Makina Article designation ISO: 1212 Cutting direction: right Compatible insert manufacturer: Taegutec Compatible insert type: 3C TD Clamping bar designation: 3C-R TD Facts Overall length: 125 mm Head width: 12 mm Head height: 12 mm Cutting width: 2 mm Maximum plunge depth: 16 mm Weight: 0.16 kg Special features Right-hand cutting orientation Compatible with Taegutec 3C TD indexable inserts ISO 1212 seating geometry Clamping bar designation 3C-R TD Intended for parting and narrow grooving FAQ Which inserts fit this holder? The Parting Tool Holder D718TM is compatible with Taegutec 3C TD indexable inserts; the holder uses the ISO 1212 seating for correct fit. Is the tool suitable for left-hand cutting? The holder is manufactured for right-hand cutting only; left-hand orientation is not supported by this model. What is the maximum plunge depth for grooving operations? Maximum plunge depth is 16 mm, suitable for many narrow parting and grooving applications. How should the holder be mounted in a turret or toolpost? Mount using the standard 3C-R TD clamping bar interface and ensure secure seating of the insert in the ISO 1212 pocket before cutting. For which workshop tasks is this holder recommended? Recommended for narrow parting, precision grooving and short-overhang turning where a 2 mm groove width and stable clamping are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Stechklemmhalter 2mm Cutting Width, 16mm Shank Width, 16mm Head Width, Fits 2C TD Inserts, 2C-R TD Rod, Right-Hand Cutting, Interior Cooling - Teknik Makina
Benefit from a compact, rigid design that combines a 16×16 mm shank, a 2 mm cutting width and a 125 mm overall length for accurate, low-vibration parting and grooving. Order the D715TM parting tool holder directly via Metav Werkzeuge or consult the Metav advisors for application guidance. Parting Tool Holder D715TM — right‑hand, 16×16 mm shank (Teknik Makina) The Parting Tool Holder D715TM is a right‑hand grooving and parting holder with an ISO 1616 16×16 mm shank, engineered for stable clamping and precise short‑run parting when used with compatible indexable inserts. Right-hand cutting direction 16×16 mm shank ISO 1616 2 mm cutting width for narrow grooves 125 mm overall length for extended reach Stable clamping for repeatable parting operations The square 16×16 mm shank and ISO designation ensure a secure fit in standard toolposts, reducing movement under load and improving repeatability. A compact overall length of 125 mm maintains stiffness close to the workpiece, helping to limit deflection during the cut. With a mass of 0.27 kg, the holder contributes little to the tool assembly inertia while still providing the rigidity expected in machining centres and lathes. These characteristics translate directly into more consistent parting quality and fewer rejects in serial turning tasks. Narrow‑width cutting for fine groove and parting tasks A 2 mm cutting width enables confined grooving and fine parting where material saving and tight tolerances matter. The holder accepts standard short‑type inserts for narrow cuts, allowing shops to keep a reduced inventory while maintaining flexibility across jobs. The right‑hand cutting orientation is suited to conventional lathe setups and supports controlled chip formation when paired with the correct insert geometry, promoting cleaner shoulders and reduced rework in delicate components. Practical depth and compatibility for everyday workshop use The toolholder supports a maximum parting depth of 16 mm, covering most small- to medium‑diameter parting applications. Compatibility with Taegutec inserts (designation 2C TD, and bar designation 2C‑R TD) simplifies tool sourcing and changeovers, as these are common industry standards for grooving and parting inserts. The ISO 1616 profile means straightforward integration into tool posts sized for 16 mm square holders, minimising setup time and supporting efficient production cycles. Workshop integration and trusted supply chain Designed for routine use in production and jobbing shops, this holder balances accessibility with industrial performance. Sourcing the product through Metav Werkzeuge provides the added assurance of a European supply hub that acts as a quality filter: consolidated stock, technical advice and consistent availability from Emmerich. For operations seeking dependable, simple-to-specify holders that work with widely available inserts, this toolholder supports reduced logistics overhead and faster turnaround between jobs. For technical advice or to secure delivery of the Teknik Makina D715TM, contact Metav Werkzeuge for personalised consultation and reliable supply from Emmerich. Technical Data Article number: D715TM Manufacturer: Teknik Makina Facts Overall length: 125 mm Shank: 16 × 16 mm (ISO 1616) Cutting width: 2 mm Maximum parting depth: 16 mm Weight: 0.27 kg Special features Cutting direction: right Compatible with Taegutec inserts (2C TD) Bar designation: 2C‑R TD FAQ Which inserts fit this holder? The holder is compatible with Taegutec indexable inserts specified as 2C TD; the matching bar designation is 2C‑R TD for correct seating and clamping. What is the shank size and standard? The shank is 16 × 16 mm and conforms to ISO 1616, enabling fitting into toolposts designed for 16 mm square holders. How deep can this holder part? The maximum parting depth is 16 mm, suitable for many small- and medium-diameter parting operations. Is the cutting direction left‑hand or right‑hand? This toolholder is configured for right‑hand cutting direction. What is the total length and why does it matter? The overall length is 125 mm; a shorter, stiff assembly helps reduce deflection and improve surface finish during parting. How heavy is the holder? The toolholder weighs 0.27 kg, contributing modestly to the overall tool assembly inertia. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
125mm Stechklemmhalter 2mm Cutting Width, 18mm Maximum Plunge Depth, 20mm Holder Width, 20mm Head Width, 20mm Holder Height, 0.406kg Weight, Compatible with Horn Inserts, ISO 2020, 2C-R S224, Right-Hand Cutting - Teknik Makina
Benefit from precise parting performance thanks to the combination of a 2 mm cutting width and a 20 × 20 mm holder profile for stable clamping and predictable chip control. The right‑hand orientation and a maximum parting depth of 18 mm deliver dependable results in compact set-ups; order directly via Metav Werkzeuge or consult our specialists for process guidance. Parting-off clamping holder D701TM — Right‑hand parting tool holder, 20×20 mm body (Teknik Makina) A Parting-off clamping holder D701TM designed for right‑hand lathe applications, intended for narrow groove and parting operations with Horn indexable inserts Right-hand tool for standard parting operations 2 mm cutting width for narrow grooves 20 × 20 mm compact holder body Compatible with Horn indexable inserts Precision and stability for narrow cuts The holder's compact 20 × 20 mm cross section and 2 mm cutting width are engineered to provide concentrated rigidity in the cutting zone, reducing vibration during hard-to-reach parting operations. Compatibility with Horn inserts and the ISO 2020 insert form ensures predictable seating and repeatable geometry when new inserts are installed. For workshops migrating from brazed or custom blades, this configuration improves process repeatability and reduces scrap by delivering consistent cut widths and reliable chip flow. Engineered for reliable machining performance With a maximum parting depth of 18 mm and a 125 mm overall length, the design balances reach with torsional stiffness to maintain dimensional accuracy in short to medium overhangs. The right‑hand orientation suits standard lathe feed directions and integrates with conventional tool posts; the adapter designation 2C‑R S224 identifies the compatible shank connection for straightforward mounting. The holder’s modest 0.406 kg mass contributes to dynamic stability without adding unnecessary inertia, helping to avoid chatter and to extend insert life under normal cutting parameters. Workshop integration and operational advantages Standardised interface and ISO designation simplify inventory and tooling management: the holder accepts commonly available indexable inserts and mates with industry‑standard clamping systems, which reduces downtime for changeovers. The compact form factor is particularly useful in multi‑station setups or smaller lathes where space is limited, while the clear definition of cutting direction and insert type aids process planning. Technical staff benefit from the combination of concise specification and familiar interfaces, allowing faster set‑up and predictable performance in serial production or jobbing environments. For application advice and procurement of the Teknik Makina D701TM parting-off clamping holder, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and delivery information Technical Data Article number: D701TM Manufacturer: Teknik Makina Designation: Parting-off clamping holder eClass: 21181005 Dimensions & Weight Holder height: 20 mm Holder width: 20 mm Cutting-head width: 20 mm Cut width: 2 mm Maximum parting depth: 18 mm Overall length: 125 mm Weight: 0.406 kg Compatibility & Features Cutting direction: right-hand Suitable for Horn indexable inserts ISO insert designation: 2020 Shank/adapter designation: 2C-R S224 FAQ What maximum depth can be machined with this holder? The maximum parting depth is specified as 18 mm for the Parting-off clamping holder D701TM, allowing for secure short-to-medium depth operations. Which insert form is compatible with this tool holder? The D701TM accepts ISO 2020 insert forms and is specified as compatible with Horn indexable inserts for straightforward replacement and repeatability. Is the holder suitable for right‑hand and left‑hand turning centres? This holder is manufactured for right‑hand parting operations; on left‑hand machines an alternative orientation would be required. What are the key dimensions relevant for tool post mounting? Important mounting dimensions include a 20 × 20 mm holder body and a 125 mm overall length; the shank/adapter designation is 2C‑R S224 for compatibility checks. How does the compact design affect machining stability? The compact 20 × 20 mm profile and modest mass (0.406 kg) concentrate rigidity at the insert, improving resistance to vibration and supporting consistent parting results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, reliable parting and grooving for precision turning
Parting and grooving tools, also referred to as parting blades, grooving tools or cut-off tools, are narrow carrier tools for lathes fitted with replaceable carbide inserts. Supplied as solid holders or flat blades, they are designed to cut precise grooves and to part finished components cleanly from the material bar.
Why internal coolant matters for deep cuts and tough materials
When used in simple form without internal coolant, the cutting fluid is applied via external machine nozzles; this is often sufficient for very shallow grooves and easily machinable materials. For deeper grooving and parting operations, however, the tool nearly encloses the slot so that external coolant cannot reach the cutting edge. Tools with internal coolant incorporate fine, integrated channels that deliver coolant under high pressure directly to the insert and beneath the chip. This targeted supply controls the intense heat in the confined cutting zone and uses flushing pressure to eject chips reliably, preventing chip jamming, surface damage and sudden tool breakage.
Clear operational benefits you can measure
- faster cycle times through reliable chip evacuation and uninterrupted cutting
- extended tool life thanks to effective heat control at the cutting edge
- consistent surface finish by avoiding chip re-cutting and scarring
- safer machining of hard or ductile materials due to reduced risk of tool fracture
- simplified setup when holders with integrated channels replace complex external coolant rigs
Metav as a practical partner for your workshop
Metav stands for democratisation of precision: decades of expertise, a quality filter in Emmerich and an assortment that supports industry and trade. With more than 48,000 customers and a catalogue of over 250,000 products, Metav provides a focused selection of parting and grooving tools, accessories and matched holders so that procurement and technical choice remain straightforward and dependable.
Parting and grooving tools bring reliable groove geometry and safe parting to turning operations; choosing holders with integrated coolant channels is essential for deep cuts and demanding materials. If technical advice is needed, Metav’s product specialists can help select the appropriate tool geometry and coolant configuration for the application.
FAQ
When is internal coolant necessary for parting tools?
Internal coolant becomes necessary for deep grooving and parting or when machining hard or ductile materials; it delivers coolant directly to the insert and beneath the chip, which is critical when external nozzles can no longer reach the cutting edge.
Can parting tools be used without internal coolant?
Yes — for very shallow cuts and easily machinable materials, parting tools can be used with external machine coolant nozzles, but performance and tool life will drop markedly for deeper cuts.
How do parting tools prevent dangerous chip jamming?
Parting tools with integrated channels use high-pressure coolant to flush chips out of the narrow slot, preventing chips from becoming trapped and minimising the risk of surface damage and abrupt tool failure.
What should be considered when choosing a grooving insert and holder?
Select a combination that matches the required groove depth and material grade; holders offering integrated high-pressure channels are preferred for deep cuts or poor-chip-breaking materials to ensure heat control and reliable chip evacuation.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com