Precise height scribers for exact layout and measurement
Height scribers and marking gauges provide millimetre-accurate layout and height measurement for metalworking, combining a stable heavy base—often magnetic for extra hold—with a hardened scriber needle to leave fine, controlled lines on workpieces. Used for setting parallels, layout work and vertical measurement up to large ranges, these devices are available as digital units with easy-to-read displays and unit switching or as analog models and dial-equipped variants that need no power. The design ensures repeatable, stable reference points for machining and fabrication, while options such as brass needles protect delicate surfaces when required.
300mm Height Gauge With Carbide Scriber, Dial Indicator 0.01mm, Dual-Column Stainless Steel - Metav IndustryLine
Take advantage of the combination of a double‑column frame, a 0–300 mm measuring range and a 0.01 mm dial reading for dependable workshop scribing and reproducible height control. Order the gauge directly via Metav Werkzeuge or contact our consultants for application advice. M206.045 Height Gauge — double‑column, 0–300 mm with 0.01 mm dial (Metav IndustryLine) A M206.045 height gauge for precise scribing and height setting in machine shops and toolrooms, featuring a robust double‑column design and a carbide scriber for long service life Double‑column design for enhanced stability Measuring range 0–300 mm with fine resolution 0.01 mm Carbide scribing point for durable marking Integrated dial and dual counter for clear readings Precision where it matters: fine resolution and trustworthy repeatability This height gauge delivers a 0.01 mm dial reading paired with a stated typical accuracy around ±0.03 mm, providing a clear, measurable advantage for routine marking and inspection tasks. The finely graduated dial indicator makes incremental adjustments straightforward, while the mechanical design minimises reading ambiguity. For production environments where consistent scribe heights and repeatable set‑ups reduce rework, the precise display and stable measurement concept translate directly into lower scrap rates and improved process reliability. Built for reproducible results: stability and ergonomic control The double‑column frame and its stainless steel construction provide high lateral stiffness and resistance to torsion, which keeps the scribe point tracking true over the full travel. At approximately 7.2 kg, the unit’s mass adds useful damping against vibration during marking. The hand wheel allows controlled, micro‑adjustable displacement and the clamping interface (9x21) secures the carriage for reproducible stops. These mechanical choices support consistent measurements across repeated operations, aiding quality assurance in everyday workshop use. Durable marking and intuitive readout for efficient workflows Equipped with a carbide scriber, the gauge resists wear when marking harder surfaces and retains a sharp contact point for clean, repeatable lines. The integrated dial indicator (reading 0.01 mm) and the dual counter—which registers movements separately in the up and down directions—simplify setting and transferring heights without losing context when reversing motion. The analog readout is robust and immediately legible on the shop floor, while the mechanical design avoids dependency on batteries or electronics for routine marking tasks. Right sized for workshop essentials: standard range versatility Classified in the standard category for measuring ranges up to 300 mm, this instrument balances reach and stiffness for general machine‑shop work, fixtures and component marking. The gauge is suited to layout, scribing and height transfer on components such as housings, jigs and tool blocks where a 0–300 mm travel reliably covers common workshop needs. The model reference M206.045 denotes the double‑column, stainless steel version with dial and dual counter as described. For robust and precise scribing from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich to discuss the M206.045’s suitability for specific applications or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: M206.045 GTIN: 4054469102887 eClass: 21170334 Tariff number: 90173000 Facts Measuring range: 0–300 mm Reading / resolution: 0.01 mm (dial) Typical accuracy: ±0.03 mm Weight: 7.2 kg Clamping: 9x21 Special features Material: stainless steel Carbide scriber (hardmetal marking point) Double‑column construction Dial indicator with dual counter (separate up/down counting) Analogue operation with hand wheel adjustment Rust‑resistant finish FAQ How precise is the reading on this height gauge? The dial provides a resolution of 0.01 mm, with a typical overall accuracy of approximately ±0.03 mm for consistent workshop measurements. Can the scriber mark harder materials without rapid wear? Yes. The carbide scriber maintains a sharp point for durable marking on tougher surfaces, extending service life and reducing the need for frequent replacement. What advantage does the double counter offer? The dual counter records movements separately for upward and downward travel, which simplifies setting and transferring heights when reversing direction, reducing the chance of miscounting. Is the gauge suitable for routine machine‑shop layout and fixture work? Designed with a 0–300 mm travel and a stiff double‑column frame, the unit fits the standard workshop profile for layout, scribing and height transfer tasks. Does the instrument require batteries or electronic maintenance? No. The gauge operates with an analogue dial indicator and mechanical adjustment via the hand wheel, avoiding dependency on batteries for everyday marking work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Height Gauge With Carbide Scriber, Fine Adjustment, Matt Chrome Scale And Vernier, DIN 862 - Metav IndustryLine
Take advantage of a durable carbide scribing tip and a fine-adjustment spindle to achieve repeatable, workshop-grade height transfers with 0–300 mm reach; the matt‑chrome scale with vernier to DIN 862 ensures clear readings to 0.05 mm. Order the gauge directly via Metav Werkzeuge or ask the consultants for application advice. Height scribing gauge M206.041 — 300 mm with carbide scribing tip (Metav IndustryLine) Height scribing gauge M206.041 for precise scribing and height transfer in standard workshop metrology, featuring fine adjustment for controlled positioning Carbide scribing tip for durable marking Fine-adjustment spindle for precise positioning Matt-chrome scale with vernier to DIN 862 0–300 mm range for standard workshop use Reliable scribing and repeatable height transfer The gauge is built around a carbide scribing tip and a robust beam in special tool steel, which together provide a durable contact point and stable reference for repeated use. The integrated fine adjustment spindle allows controlled micro‑movement of the scriber so that marks can be set without overshoot, improving setup speed and reducing rework. With an analogue vernier to 0.05 mm, the instrument supplies the level of resolution expected for standard workshop inspections and layout tasks. Designed for workshop conditions and standards compliance Constructed to meet DIN 862, this scribing gauge balances reach and stiffness as a standard (0–300 mm) measuring tool: long enough for everyday components yet still rigid for single‑handed operation. The matt‑chrome finish on scale and vernier reduces glare and wear, aiding readability under shop lighting. The combination of recognised standards and durable finishes translates into lower lifecycle risk for routine marking and height transfer tasks. Practical handling, secure clamping and clear reading Clamping is handled via 2× M5 screws that secure the scriber assembly firmly; the vernier and scale provide precise, repeatable reference points for layout work. The instrument’s analog design keeps operation straightforward for operators familiar with traditional vernier techniques, while the 0.05 mm grading aligns with common mechanical tolerances in metalworking. The gauge’s mass contributes to stability during marking without excessive bulk in typical bench use. Where the gauge adds value in the workflow As a shop‑ready scribing instrument, the gauge reduces setup time for repetitive layout tasks and supports consistent marking on components, jigs and fixtures. Its carbide point stands up to frequent use on hardened tooling and allows clear, lasting scribe lines on metals. Selected for applications that prioritise durability and repeatability, this tool fits machine shops, toolrooms and fixture workshops that require reliable mechanical metrology without complex electronics. Contact Metav Werkzeuge to specify the Metav IndustryLine M206.041 for reliable workshop scribing and to confirm stock or delivery options Technical data Article number: M206.041 GTIN: 4054469102825 Customs tariff number: 90173000 eClass: 21170334 Numbers / Core technical data Measuring range: 0–300 mm Accuracy: 0.05 mm Reading: 0.05 mm Weight: 3.2 kg Clamping: 2× M5 Special features / Versions Carbide scribing needle (hard metal) Special tool steel construction Scale and vernier matt‑chrome plated Fine‑adjustment spindle included Analogue vernier to DIN 862 Manufacturer: Metav IndustryLine FAQ What level of precision can be expected from this height scribing gauge? The gauge delivers a vernier reading and resolution of 0.05 mm, matching the indicated accuracy and suitable for standard workshop inspection tasks. Is the scribing tip suitable for repeated use on hardened surfaces? Yes, the carbide scribing tip is designed for durability and will maintain a defined scribe on many metals, making it appropriate for frequent layout work. Does the instrument comply with recognised metrology standards? The instrument is manufactured to DIN 862, ensuring compatibility with established workshop measuring practices and expectations. Which applications are best suited to the 0–300 mm range? The 0–300 mm range classifies the gauge as a standard workshop instrument, ideal for machine‑shop components, fixtures and everyday marking where a balance of reach and stiffness is required. How is the scriber fixed and fine‑adjusted during setup? The scriber assembly is secured with 2× M5 clamping screws and includes a fine‑adjustment spindle for precise positioning before marking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Height Gauge With Read-Off Magnifier, Carbide Scribing Tip, Adjustable Scale, Fine Adjustment, DIN 862 - Metav IndustryLine
Take advantage of precision marking, robust construction and a practical fine-adjustment mechanism for reliable workshop layout and repeatable results. Order the tool directly via Metav Werkzeuge or ask our consultants for application advice. Metav IndustryLine M206.043 — height gauge with carbide scribing needle and reading magnifier The Metav IndustryLine M206.043 is a workshop height gauge designed for precise scribing and layout tasks in metalworking and tool rooms, featuring a carbide scribing needle, a reading magnifier and fine adjustment for controlled marking over a 300 mm range. Analog vernier with 0.05 mm accuracy Carbide scribing needle for durable marks Fine adjustment wheel for micro positioning Matt‑chromed scale for glare‑free reading Precise layout and measurable benefits for everyday production A mechanically simple yet highly effective layout tool, this gauge combines an analog vernier with a reading magnifier to support accurate transfers from datum to workpiece. The vernier resolution of 0.05 mm aligns with workshop standards and enables consistent marking for drilling, milling and fabrication setups. The inclusion of a carbide scribing needle ensures marks remain sharp even on tougher materials, while the matt‑chromed scale reduces reflections under bright shop lighting, improving legibility and reducing rework. Robust build for repeatable, traceable measurements Constructed from special tool steel with a matt‑chromed scale and a rigid clamping system (9x23), the instrument is tailored to withstand daily use in industrial environments. The design emphasises stability and repeatability so that each layout line can be reproduced without drift. Compliance with DIN 862 signals conformity with recognised measuring tool standards, giving procurement and quality teams a clear reference point for acceptance and inspection. Controlled scribing and fine positioning for critical tasks The fine adjustment mechanism provides micro‑movement control, allowing exact placement of the scribing point without overshoot. Paired with the reading magnifier, this delivers a precise workflow for toolmakers and fitters who require incremental adjustments rather than coarse repositioning. The analogue design avoids electronic dependencies in rough environments, providing deterministic behaviour and immediate tactile feedback when setting marks. Practical considerations for workshop integration With a 300 mm measuring range the tool falls into the workshop standard category, offering a balanced combination of reach and stiffness suited to general machine and metalwork tasks. The relatively compact footprint and straightforward operation make it an effective choice for production benches and jigs where repeatable layout is essential. The gauge’s weight and clamping arrangement contribute to a stable setup during scribing, reducing parallax and operator variability. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M206.043 height gauge can be introduced into your inspection and layout processes, or to arrange technical advice and supply directly from our Emmerich location. Technical Data Article number: M206.043 GTIN: 4054469102849 Category: Height gauges / Layout tools Facts Measuring range: 0–300 mm Accuracy / resolution: 0.05 mm Weight: 4.5 kg Standard: DIN 862 Readout: Analog vernier Special features Material: Special tool steel Scale and vernier: Matt‑chromed Scribing point: Carbide (HM) needle Reading aid: Magnifier for scale Fine adjustment: Micro positioning wheel Clamping: 9x23 system Type: Workshop height gauge FAQ How precise is the layout when using this height gauge? The height gauge provides an analogue vernier resolution of 0.05 mm, delivering workshop‑grade precision suitable for general machine shop layout and marking. Is the scribing tip suitable for hard materials? Yes, the instrument is fitted with a carbide scribing needle, designed to hold a sharp edge for repeated marking on steel and other tougher substrates. What measuring range does this gauge cover and how is it classified? The gauge covers 0–300 mm, placing it in the standard category for workshop use where a balance of reach and rigidity is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Height Measuring And Scribing Device Colour 3.5" Touchscreen, ISO 17025 Calibrated Wireless+USB - Microtech Metrology
Benefit from stable dual-column guidance, precise ±0.015 mm accuracy and traceable ISO 17025 calibration for dependable shop-floor measurements; order the Microtech Metrology height gauge directly via Metav Werkzeuge or request advice from our consultants. Microtech Metrology Height gauge and scribing device — dual-column design with tablet display and wireless/USB data output The Microtech Metrology Height gauge and scribing device is a tablet-equipped measuring system designed for general workshop and production inspection tasks, combining a rigid base with a colour touchscreen for rapid setup and repeatable height and scribe measurements. Dual-column stability for repeatable readings Integrated 3.5" colour touchscreen display Wireless and USB data output for SPC integration Delivered with ISO 17025 calibration certificate Traceable precision that supports quality decisions The system delivers a measuring range of 0–300 mm, placing it in the Standard class for workshop metrology where reach and stiffness are balanced. With a stated accuracy of 0.015 mm and a display readability of 0.001 mm, the instrument supplies the numeric reliability required for in-process checks and first-article inspections. Because an ISO 17025 calibration certificate is supplied, measurement results are immediately traceable to recognised laboratory standards, which simplifies quality documentation and audit trails. Faster inspection workflows through modern data transfer Equipped with wireless connectivity and USB output, the instrument moves measurement data directly into quality-control systems or spreadsheets, reducing transcription errors and speeding up batch inspections. The colour 3.5" touchscreen provides an intuitive interface for setting scribe positions and switching modes, while the tablet form factor supports rapid visual confirmation of values. This combination of digital display and reliable data output offers a clear rational benefit: fewer steps between measurement and decision. Robust construction for repeatable shop-floor use A cast iron base and dual-column guidance deliver the mechanical stiffness necessary to keep readings stable during routine use. Fine adjustment provides smooth approach control for scribing and precise datum setting, which reduces rework and improves throughput. The design focuses on repeatability and operator ease, ensuring that measurements remain consistent across shifts and operators. Practical fit for workshops and toolrooms As a standard-range height gauge, this device covers the most common inspection tasks in machining and assembly, from setting fixtures to checking component heights. The dual-column layout increases lateral stability compared with single-column units, while the tablet-style display keeps controls and results within the operator’s line of sight. Together, these features minimise handling time and support efficient quality routines on the shop floor. Contact Metav Werkzeuge today to review technical compatibility and obtain the ISO 17025 calibration certificate for the Microtech Metrology height gauge; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: 144303271 GTIN: 4061905047619 Brand: Microtech Metrology eCl@ss: 21170334 Data output: Wireless+USB Display type: Tablet SKU: 144303271 Numbers / Core technical data Measuring range: 0–300 mm Accuracy: 0.015 mm Readability/resolution: 0.001 mm Display size: 3.5 inch colour touchscreen Special features / Design and functions Base material: cast iron Dual-column guidance Fine adjustment present Digital device with tablet interface Delivered calibrated to ISO 17025 with certificate FAQ What measuring range does the instrument cover? The Microtech Metrology height gauge and scribing device covers a measuring range of 0–300 mm, suitable for standard workshop and machine‑shop tasks. Is the instrument calibrated and traceable? Yes, the device is supplied fully calibrated with an ISO 17025 calibration certificate included, ensuring traceability and audit readiness. How is measurement data exported for SPC or reporting? Measurement values can be transferred via the instrument’s wireless interface or directly over USB, allowing integration into SPC systems or spreadsheets. What construction features support repeatable readings? A cast iron base combined with dual-column guidance and a fine-adjustment mechanism increases stiffness and stability for repeatable height and scribe measurements. Which product identifier should be used when ordering or querying technical details? Please refer to SKU 144303271 (GTIN 4061905047619) when enquiring about the Microtech Metrology height gauge and scribing device. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Digital Height Gauge 0.01mm Resolution stainless steel RB 5 Data Output - Metav IndustryLine
Achieve repeatable vertical measurements with stainless steel construction, 0.01 mm resolution and integrated RB 5 data output for efficient logging and traceability. Combine robust build quality, fine resolution and straightforward data transfer for uninterrupted inspection workflows. Order the height gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital height gauge M219.070 — 500 mm measurement range, RB 5 data output (Metav IndustryLine) The Digital height gauge M219.070 is a stainless-steel, 500 mm instrument designed for precise vertical measurements in workshop and inspection applications. 0.01 mm resolution for fine increments RB 5 data output for process logging Stainless steel construction for stability Carbide scribing pin for durable marking Precision engineered to reduce measurement uncertainty The instrument delivers a 0.01 mm readout and an indicated accuracy of ±0.05 mm, providing a reliable balance between resolution and practical tolerance control for routine inspection tasks. The 500 mm measuring range places the gauge in the mid-range category, offering the reach needed for larger fixtures while retaining the rigidity required for repeatable readings. The clear numeric resolution makes it straightforward to document dimensional changes and reduces interpretation error compared with coarser instruments. Seamless data capture and measurement workflow Equipped with RB 5 data output, the gauge enables direct digital transfer of measurement values into statistical or production-control systems, supporting traceable logging without manual transcription. The digital display includes ON/OFF, PRE-, TOL-, HOLD-, DIR-, 0/ABS- and mm/inch functions, which simplify switching between reference modes and pausing values for recording. This combination of on-device functionality and electronic output accelerates inspection cycles and eases integration into documented quality processes. Robust build for demanding shop-floor use Constructed from stainless steel, the instrument resists corrosion and offers dimensional stability in typical industrial environments. A carbide scribing pin is fitted for long service life when marking or scribing on metal workpieces, avoiding frequent consumable replacements. The gauge’s solid base mass contributes to stable vertical alignment; the overall design supports accurate placement on jigs, fixtures or large assemblies where consistent contact and low deflection are essential. Practical applications and operational advantages The mid-range measurement capacity makes this gauge suitable for toolroom inspection, fixture set-up and quality control of medium-sized components. It is particularly useful where a mix of high resolution and a moderate reach is needed, such as checking datum heights on mould tools or verifying step and shoulder dimensions on machined parts. The integrated output and on-board functions help maintain throughput in production environments while preserving auditability of measurement data. For Metav IndustryLine precision and procurement, contact Metav Werkzeuge for supply and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M219.070 GTIN: 4054469112152 Manufacturer: Metav IndustryLine Facts Material: stainless steel Measurement range: 0–500 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Weight: 8.7 kg Special features Data output: RB 5 Display functions: ON/OFF, PRE-, TOL-, HOLD-, DIR-, 0/ABS-, mm/inch Scribing pin: carbide scribing pin Digital instrument with integrated measurement modes FAQ Is this gauge suitable for general workshop inspection? The Digital height gauge M219.070 is intended for workshop and inspection use, offering a 500 mm range and a 0.01 mm readout suited to general production and toolroom checks. How is measurement data transferred from the gauge? Data is exported via the RB 5 interface; the unit’s RB 5 output supports direct logging into compatible data-collection systems for traceable records. What level of dimensional accuracy can be expected? The instrument indicates an accuracy of ±0.05 mm, which delivers consistent results for routine quality control where that tolerance band is acceptable. Can the gauge mark or scribe directly on parts? Yes — the gauge is fitted with a carbide scribing pin, designed for durable marking on metal components during set-up or inspection. Which environments benefit most from this model? The stainless-steel build and mid-range capacity make it well suited to machine shops, toolrooms and fixture assembly areas that require stable, repeatable vertical measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Height Gauge Two-Column Stainless Steel 0.01mm Resolution, Handwheel, Carbide Scriber - Metav IndustryLine
The combination of 500 mm measuring range, 0.01 mm resolution and a double‑column stainless steel frame ensures stable, reproducible layout and inspection work; order the instrument directly via Metav Werkzeuge or consult the team for application advice. Digital height gauge M219.067 — 500 mm range, 0.01 mm resolution (Metav IndustryLine) The Digital height gauge M219.067 is a double‑column, stainless steel measuring instrument designed for workshop layout, inspection benches and fixture set‑up where medium‑range precision is required Double‑column stainless steel construction 500 mm measuring range for medium assemblies Digital display, mm/inch, preset and zero Carbide scriber and fine handwheel adjustment Precision where it counts for inspection and layout A clear benefit of this digital measuring column is its high resolution of 0.01 mm, which, together with a documented accuracy of 0.04 mm, supports reliable go/no‑go decisions and reduces rework in serial production. The fine graduated readout and the ability to switch between mm and inch simplify documentation and traceability in mixed‑unit environments. By combining a repeatable display with mechanical stability, the device shortens inspection cycles and improves throughput without sacrificing measurement quality. Built to remain stable during heavy workshop use The double‑column stainless steel frame provides the rigidity required for repeatable measurements across the full 500 mm travel; this construction reduces twist and deflection during positioning. A carbide scriber offers durable, wear‑resistant marking for layout tasks, while the integrated handwheel permits controlled, fine approach to the workpiece. The overall mass (approx. 9.7 kg) and solid materials contribute to a feel of durability that suits both shop floors and inspection rooms. Intuitive digital control for faster, consistent results The electronic readout includes ON/OFF, mm/inch, ZERO and PRESET functions to speed routine measurements and accommodate offsets or datum shifts. The display’s inch resolution of 0.0005 in and metric resolution of 0.01 mm allow flexible documentation and eliminate conversions during quality checks. This combination of mechanical stability and straightforward digital operation makes the instrument suitable for workshop metrology, fixture verification and quality control tasks where reproducible, traceable data is required. For dependable medium‑range measurement choose the Metav IndustryLine digital height gauge and contact Metav Werkzeuge for tailored advice and local handling from Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M219.067 GTIN: 4054469112138 Manufacturer: Metav IndustryLine Facts Measuring range: 0–500 mm Resolution: 0.01 mm / 0.0005 in Accuracy: 0.04 mm Weight: 9.7 kg Display: digital Special features Double‑column stainless steel construction Carbide scriber Fine handwheel adjustment Digital functions: ON/OFF, mm/inch, ZERO, PRESET FAQ What measuring range does this instrument cover? The digital height gauge offers a measuring range of 0–500 mm, making the M219.067 suitable for medium‑sized assemblies and general workshop inspection. What resolution and accuracy can be expected? Resolution is 0.01 mm (0.0005 in) on the display; the device is specified with an accuracy of 0.04 mm for reproducible measurements. Is the scribing tip suitable for regular layout work? Yes, the gauge is equipped with a carbide scriber, which provides durable marking performance for repeated layout and inspection operations. Which digital functions aid repeatable measurement workflows? The readout includes ON/OFF, mm/inch switching, ZERO and PRESET functions to support offsetting, quick datum setting and unit conversion during the measurement process. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Double-Column Height Gauge With Fine Adjustment, Dial Indicator 0.01mm, Carbide Scriber - Metav IndustryLine
Take advantage of the double-column stability, stainless-steel construction and a fine dial indicator (0.01 mm) for repeatable scribing and measurement tasks; order the instrument directly via Metav Werkzeuge or contact the consultants for specification support. Double-Column Height Gauge M206.046.T — 500 mm, Fine Adjustment & Carbide Scriber The Double-Column Height Gauge M206.046.T is a precision marking and measurement instrument for workshop and toolroom use, offering a 500 mm measuring range and a fine-adjustment mechanism for reproducible scribing and layout work. Double-column stability for consistent measurements 500 mm measuring range for medium-sized components Dial indicator 0.01 mm for fine reading Carbide scribing needle with fine-adjustment control Precision and stability for accurate scribing The double-column construction provides a rigid guide that reduces lateral runout and ensures stable vertical travel, which is essential when transferring layout lines or setting heights on jigs and fixtures. A mounted dial indicator with 0.01 mm resolution offers clear, incremental reading for fine work, while the mechanical design maintains an accuracy of ±0.04 mm across the measuring span. This combination of stability and high-resolution indication reduces rework and shortens set-up time in medium-format inspection and marking tasks. Designed for workshop workflows and repeatability A dedicated fine-adjustment control and a hand-operated wheel enable controlled, repeatable movement of the scriber for delicate alignment and step measurements. The instrument’s double-counting mechanism records travel direction separately, making it straightforward to follow incremental adjustments or return to a previously set reference. These features translate into practical time savings on repetitive marking jobs and a lower risk of human error during precise layout operations. Built materials and measurable performance Constructed from stainless steel and fitted with a carbide scribing needle, the gauge resists wear and maintains tip geometry for longer service life. Measurable specifications include a measuring range of 0–500 mm, a mass of 7.2 kg for good base stability, and a clamping dimension of 9×21 for secure fixation of the slider. The height gauge is an analogue instrument with a tactile handwheel and robust mechanics that suit machine shops, toolrooms and quality control benches where practical resilience and straightforward reading are priorities. For reliable layout and repeatable height setting choose the Metav IndustryLine M206.046.T — contact Metav Werkzeuge for tailored technical advice and supply direct from Emmerich. Technical Data Article number: M206.046.T GTIN: 4061905047640 Customs tariff number: 90173000 Brand: Metav IndustryLine Facts Measuring range: 0–500 mm Accuracy: ±0.04 mm Dial indicator resolution: 0.01 mm Weight: 7.2 kg Measuring range classification: Medium (300–500 mm) Special features Material: stainless steel Fine-adjustment mechanism Carbide scribing needle Handwheel operation Double-column construction Double-counting mechanism (separate up/down counting) Analogue instrument (dial indicator) Clamping: 9×21 FAQ How accurate is the height gauge for layout work? The M206.046.T delivers an accuracy of ±0.04 mm and a dial resolution of 0.01 mm, which is suitable for precise scribing and medium-format inspection tasks. Is the scribing needle durable for repeated use on steel? Yes, the instrument is fitted with a carbide scribing needle, providing long-term tip retention and reliable performance on metallic surfaces. Which measuring range category does this gauge fall into? With a measuring range up to 500 mm, the gauge is classified in the medium range (300–500 mm), balancing reach and rigidity for workshop components. Can the dial indicate small incremental adjustments clearly? The integrated dial indicator with 0.01 mm reading allows clear observation of small increments, while the fine-adjustment control permits controlled, repeatable movement. Is the gauge recommended for routine workshop inspection or more for layout work? The robust double-column design, stainless-steel build and fine-adjustment make the gauge suitable for both routine inspection and precise layout or marking operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Height Gauge With Dial Indicator 0.01mm, Dual-Column, Carbide Scriber, Stainless Steel - Metav IndustryLine
Combine robust stainless-steel construction with a fine 0.01 mm dial indicator and a carbide scribing needle to secure repeatable layout and setting operations; benefit from a stable double-column design and precise handwheel control for reliable shop-floor performance. Order the height gauge directly via Metav Werkzeuge or consult our specialists for application advice. M206.046 Height Gauge — Double-column, 500 mm with 0.01 mm dial The M206.046 is a double-column stainless-steel height gauge designed for accurate marking and height setting in toolrooms and production environments up to 500 mm Double-column design for high stability Dial indicator with 0.01 mm reading Carbide scribing needle for durable marking Stainless-steel construction, corrosion-resistant Repeatable measurements for medium-sized components The double-column frame and the finely geared handwheel ensure smooth, controlled vertical travel, translating into consistent results when marking or setting heights. The integrated dial indicator with 0.01 mm resolution and the accompanied double-counter allow both fine incremental reading and unambiguous total count, which reduces transcription errors during repetitive tasks. With a measuring span to 500 mm, this instrument sits in the workshop’s medium range, offering the best compromise between reach and stiffness for components such as fixture parts, housings and medium assemblies. Built to withstand everyday shop use A heavier base and a twin-column guide deliver the rigidity required to keep readings stable; the instrument’s stainless-steel construction adds corrosion resistance for long service life in busy environments. The carbide scribing needle remains sharp under repeated use, preserving marking clarity and minimising rework. The overall mass of the unit contributes to vibration damping and repeatability, while the robust clamping elements lock adjustments securely, so set-ups remain unchanged during machining or inspection tasks. Clear reading and practical counting for faster workflows The analogue display was chosen for immediate visual assessment: the dial indicator, showing hundredths of a millimetre, makes fine adjustments intuitive, while the double-counter records movements separately for upward and downward travel—helpful when setting reference heights or transferring dimensions between parts. The mechanical readout and simple adjustment mechanism make the instrument easy to integrate into daily quality-control routines without needing additional electronics, and the familiar layout reduces training time for workshop personnel. Contact Metav Werkzeuge today for tailored advice on the Metav IndustryLine M206.046 and to discuss suitability for specific layout or inspection tasks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M206.046 GTIN: 4054469102894 Material: stainless steel Measuring range: 0–500 mm Resolution (dial): 0.01 mm Accuracy: 0.04 mm Weight: 9.7 kg Clamping: 9 x 21 Tariff number: 90173000 Core measurements Measuring range max: 500 mm Measuring range min: 0 mm Resolution: 0.01 mm Stated accuracy: 0.04 mm Weight in kg: 9.7 Special features Double-column construction Dial indicator with double-counter (separate up/down counting) Carbide (hard-metal) scribing needle Handwheel for fine adjustment Corrosion-resistant stainless-steel components Analog operation FAQ What is the measuring range of this height gauge? The height gauge has a measuring range of 0–500 mm and is classified for medium-range workshop tasks. How fine is the dial indicator on the instrument? The integrated dial indicator reads in 0.01 mm increments, providing fine visual resolution for layout and setting operations. Is the scribing point suitable for repeated marking on metal? Yes, the gauge is fitted with a carbide scribing needle, which offers durable marking performance on common shop materials. Can the instrument keep a set height reliably during work? The double-column frame, secure clamping and weighted base ensure stable locking of the chosen height for repeatable results. Does the gauge include a counter for tracking movements? Yes, the device features a double-counter, which records upward and downward movement separately for clear documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Height Gauge With Readout Magnifier, Carbide Scriber, Adjustable Scale, Fine Adjustment, DIN 862 - Metav IndustryLine
Benefit from a robust combination of repeatable marking, a tungsten‑carbide scribing probe and a finely adjustable scale for reliable layout work. Use the clear vernier and magnifier to speed up inspection and shop‑floor tasks. Order this height gauge directly via Metav Werkzeuge or consult our specialists if additional information is required. Metav IndustryLine Height Gauge M206.044 — 500 mm, Carbide Scribing Probe The Metav IndustryLine Height Gauge M206.044 is a workshop instrument for precise scribing and height measurement, designed for metalworking, toolmaking and inspection tasks. 500 mm measurement range Carbide scribing probe included Adjustable fine feed and scale Magnifier for easy reading Repeatable layout with industrial precision The instrument is designed to deliver consistent marking and height measurement across repetitive tasks. With a 500 mm range and construction from special tool steel, the gauge offers the reach needed for medium‑sized components while keeping stiffness for accurate results. The device conforms to DIN 862, supporting established shop standards, and the integrated tungsten‑carbide scribing probe resists wear during routine layout operations. The combination of robust materials and a reliable clamp provides predictable behaviour, reducing rework in production. Clear reading and controlled adjustments for fast throughput A magnifier enhances the analogue vernier, which has a reading step of 0.05 mm, enabling quick and precise interpretation of marks without complex electronics. The adjustable scale and dedicated fine adjustment mechanism allow micro‑corrections of the scriber position, so delicate layout tasks are simpler and less error‑prone. Ergonomic handling and a secure clamping system (12 × 30 mm) make the instrument stable during use, improving measurement confidence on the shop floor and during quality checks. Built for workshop use and long service life Surface treatments such as the matt‑chrome scale and vernier reduce glare and help maintain legibility in bright environments. The gauge’s components are selected for durability: the scriber is hardened carbide and the body is engineered for daily industrial exposure. Classified as a medium measuring range tool, this instrument is suitable for fixture setup, mould and die pre‑work and general workshop layout where reach and rigidity must be balanced. The substantial mass (approx. 10.5 kg) contributes to stability during marking and measurement, resulting in fewer accidental slips and re‑marks. For tailored procurement or technical advice on the Metav IndustryLine height gauge M206.044 — including compatibility with specific workshop applications — contact Metav Werkzeuge in Emmerich for dependable guidance and supply. Technical data Article number: M206.044 GTIN: 4054469102856 Category: Height gauge Country tariff code: 90173000 Core measurements Measuring range: 0–500 mm Maximum range: 500 mm Reading / resolution: 0.05 mm Stated accuracy: ±0.07 mm Weight: 10.5 kg Clamp size: 12 × 30 mm Features & materials Analogue vernier design Conforms to DIN 862 Tungsten‑carbide scribing probe Fine adjustment mechanism Adjustable scale (scaling easily adjustable) Magnifier for enhanced reading Special tool steel body; scale and vernier matt‑chrome plated FAQ What is the measuring range of the gauge? The measuring range is 0–500 mm, specified for the Metav IndustryLine height gauge M206.044. How fine is the reading and what accuracy can be expected? The analogue vernier provides a 0.05 mm reading increment; the instrument’s stated accuracy is around ±0.07 mm. Is the scriber suitable for intensive workshop use? Yes. The scriber is made of tungsten carbide, giving the Metav IndustryLine tool high wear resistance for repeated scribing on metal surfaces. Does the instrument include a magnifier for reading the vernier? A reading magnifier is integrated to improve legibility of the vernier and speed up layout and inspection work. For which applications is this height gauge recommended? Recommended uses include workshop layout, tool and fixture setup, mould and die pre‑work, and general inspection tasks where a medium measuring range and robust marking are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Height Gauge With Tungsten Carbide Scriber, Fine Adjustment, Matt Chrome Scale DIN 862 - Metav IndustryLine
Take advantage of precise vertical scribing and repeatable layout with integrated fine adjustment and a hardmetal scribing needle, ensuring consistent workshop results. Order through Metav Werkzeuge for reliable supply and technical advice. Height gauge M206.042 — 500 mm, carbide scribing needle, fine adjustment (Metav IndustryLine) The Height gauge M206.042 is a precision workshop instrument for vertical marking and layout across a 500 mm range, combining a robust profile with a fine-adjustment mechanism for controlled scribing. Fine-adjustment spindle for precise scribing 500 mm measuring range, robust profile Carbide scribing needle on tool steel shank Precision marking with controlled fine adjustment This analogue height gauge provides repeatable scribing through a dedicated fine adjustment spindle that reduces setup error and enables millimetre-fine positioning before the final mark. The included hardmetal scribing needle (carbide) is mounted on a tool steel shank for durable contact with workpiece surfaces; this combination minimises wear and maintains a sharp scribe over extended use. The vernier scale and matt‑chromed finish on the scale improve legibility while resisting glare in bright workshop lighting. Designed for medium-range workshop layout and repeatability Classified for the medium range (measuring range up to 500 mm), the instrument balances reach and stiffness for layout tasks on components, jigs and fixtures. The robust sectional profile supports stable vertical travel and reduces deflection during marking, which translates into better reproducibility on larger assemblies. Use in machine shops and toolrooms benefits from the instrument’s focus on stable handling and consistent vertical alignment. Clear analogue reading and standards-based construction The gauge is an analogue (nonius) instrument with a vernier reading of 0.05 mm and a stated accuracy of ±0.07 mm, conforming to DIN 862. These characteristics make the device suited to routine quality checks and layout work where mechanical precision is required without the need for electronic data output. The analogue format also removes dependence on batteries and simplifies long-term workshop use. Robust materials and practical handling for daily use Built from special tool steel with a matt‑chromed scale and nonius, the device is engineered for daily workshop exposure. The carbide scribe resists blunting on harder surfaces, and the clamping specification supports secure lock‑up after adjustment. At a declared mass of 7.4 kg, the gauge presents as a substantial layout tool that sits firmly on the shop surface during operation, reducing the need for repeated re‑alignment. For dependable vertical marking choose the Metav IndustryLine height gauge and contact Metav Werkzeuge in Emmerich for delivery and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M206.042 GTIN: 4054469102832 Category: Height gauge Numbers / Core technical data Measuring range: 0–500 mm Reading (vernier): 0.05 mm Accuracy: ±0.07 mm Weight: 7.4 kg Standard: DIN 862 Special features / Versions Carbide (hardmetal) scribing needle Fine-adjustment spindle Scale and vernier matt-chromed Material: special tool steel Analogue (nonius) instrument Clamping: 10x25 FAQ What measuring tasks is this gauge best suited for? This height gauge M206.042 is intended for vertical marking and layout on components, fixtures and assemblies up to 500 mm, offering a balance of reach and stiffness for workshop and toolroom tasks. How precise are readings with the analogue vernier? The instrument provides a vernier reading of 0.05 mm with a stated accuracy of ±0.07 mm under the conditions described by DIN 862, making it suitable for general machining and inspection tasks. Can the scribing needle be replaced, and what material is it? The scribing needle is made of carbide (hardmetal) mounted on a tool steel shank; it is a replaceable wear part designed for durability on harder materials. Is there a fine-adjustment for controlled marking? Yes, the gauge includes a fine-adjustment spindle that allows controlled pre-positioning before final scribing to improve repeatability. What maintenance does the tool require? Routine cleaning of the scale and protection of the scribe point are recommended; the matt‑chromed finish reduces glare and aids in preserving legibility and function over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Height Gauge Double-Column Stainless Steel 0.01mm Resolution - Metav IndustryLine
Take advantage of the combination of large-range capacity, stainless‑steel rigidity and fine digital resolution for dependable layout and inspection tasks; order directly via Metav Werkzeuge or contact our advisors for tailored technical guidance. Digital Height Gauge M219.068 — 600 mm double‑column, 0.01 mm display (Metav IndustryLine) The Digital Height Gauge M219.068 is a stainless‑steel, double‑column gauge designed for workshop and industrial layout work, offering a 600 mm measuring range with a precise 0.01 mm digital readout. 600 mm measuring range Double‑column stainless construction Digital display with 0.01 mm resolution Carbide scriber and handwheel Large‑range stability for consistent measurements This double‑column height gauge is classed as a large‑range (500–1,000 mm) instrument, which places it in the category used for sizeable components and heavy‑duty layout tasks. The double‑column construction increases profile stiffness across the full 600 mm span, reducing deflection and improving reproducibility when marking or checking heights. The robust stainless steel frame combines resistance to workshop wear with the mass needed to damp vibration, so each measurement is less influenced by handling or table vibration. Digital convenience and measurable accuracy for production use Equipped with a digital display including ON/OFF, mm/inch, ZERO and PRESET functions, the gauge simplifies repeat measurements and unit conversions without manual calculation. The electronic resolution of 0.01 mm provides clear numerical feedback, while the instrument's specified accuracy of 0.05 mm offers a reliable performance level for general engineering and inspection tasks. The presence of a calibrated numeric display helps speed up quality checks and reduces transcription errors in production documentation. Scriber, control and handling that improve workflow A carbide scriber is fitted for durable, repeatable scribing on marking operations; carbide retains a fine edge and resists wear far longer than standard steels. The integrated handwheel enables smooth fine adjustment, allowing controlled approach to the workpiece and precise contact pressure for clean marks. Together these features shorten cycle time for layout operations and reduce the need for frequent tool changes, supporting efficient small‑batch and series production. Practical benefits for workshop integration Designed for routine workshop use, the instrument balances reach and manoeuvrability: the 600 mm range covers typical fixtures and medium‑sized housings while remaining manageable for one‑person setup on a surface table. The stainless construction and simple digital operation make maintenance straightforward—regular cleaning and light lubrication preserve accuracy. If traceability or a specific calibration status is required for in‑house quality systems, Metav Werkzeuge can advise on available calibration options and certificates. Choose the Metav IndustryLine M219.068 for robust large‑range layout and inspection tasks and contact Metav Werkzeuge in Emmerich for personalised technical advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M219.068 GTIN: 4054469112145 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–600 mm Resolution (display): 0.01 mm Specified accuracy: 0.05 mm Weight: 10.35 kg Special features Material: stainless steel Construction: double‑column Display functions: ON/OFF, mm/inch, ZERO, PRESET Includes carbide scriber Fine feed handwheel Digital instrument (electronic readout) FAQ What measuring range does this gauge cover? The Digital Height Gauge M219.068 covers a measuring range of 0–600 mm, placing it in the large‑range (500–1,000 mm) class for workshop and production layout tasks. How fine is the digital readout and what accuracy is specified? The instrument features a digital readout with 0.01 mm resolution and a specified accuracy of 0.05 mm, suitable for standard machining and inspection applications. Is the scriber durable for repeated scribing operations? Yes, the gauge is fitted with a carbide scriber, which offers long‑term edge retention and wear resistance for repeated marking on a variety of materials. Can the gauge display measurements in inches? The digital display supports mm/inch switching via the designated display function, allowing quick unit changes without conversion. Who provides calibration if a certificate is required? Calibration and certification options are not stated in the product data; please contact Metav Werkzeuge to discuss available calibration services and traceability requirements for the Digital Height Gauge M219.068. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Height Gauge With Fine Adjustment Wheel, ABS 0.01mm, RB6 Data Socket, Stainless Steel - Metav IndustryLine
Reliable workshop precision with a 600 mm measuring capacity, 0.01 mm readout and robust stainless‑steel construction ensures consistent results across large components; the integrated handwheel and RB 6 data output streamline setting and digital recording. Benefit from an absolute measuring system and durable carbide scribing tip for repeatable layout work. Order the instrument directly via Metav Werkzeuge or consult our metrology specialists for application advice. Digital height gauge M219.098 — 600 mm range, 0.01 mm readout (Metav IndustryLine) The Digital height gauge M219.098 is a workshop and inspection instrument designed for layout, height comparisons and profile transfer on medium to large components, combining an absolute encoder with practical handling features for production environments. 600 mm measuring range 0.01 mm resolution readout Absolute measuring system (3 V) Stainless steel construction Handwheel for fine adjustment Precise measurement where reach and repeatability matter The instrument's 600 mm measuring capacity places it in the large‑range category (500–1,000 mm), making it suitable for checks on medium and large assemblies while retaining guidance stability. The absolute measuring system runs from a 3 V supply and maintains position information after power loss, so reference points remain fixed. With a display resolution of 0.01 mm and a stated accuracy of 0.05 mm, the gauge delivers measurable repeatability for routine inspection tasks; these figures mean the device is appropriate for production control, incoming inspection and simple toolroom set‑ups where millimetre‑level consistency is required. Faster workflows through integrated data and easy handling An integrated handwheel allows smooth, controlled vertical adjustment, improving contact consistency for scribing and height comparison. The digital display includes ON/OFF, mm/inch, HOLD, INC and ORIGIN functions to support different measurement routines and unit preferences. A dedicated RB 6 interface and compatible input protocol enable connection of a digital test indicator for data capture or traceable logging, supporting process documentation and simple digital recording. The absence of a measurement speed limit ensures high‑throughput operation without electronic throttling, which benefits repetitive inspection cycles. Built for workshop durability and clear transfer of marks Manufactured from stainless steel and fitted with a carbide scribing tip, the gauge resists corrosion and retains a defined scribe point for marked‑out work. At approximately 8 kg mass it provides a stable base for measurements across its full travel; this weight aids reproducibility by reducing susceptibility to incidental movement. Robust construction combined with practical controls makes the instrument well suited for daily use in machine shops, layout benches and production inspection stations. As part of the Metav IndustryLine offering, the unit benefits from distribution and quality checks performed at Metav’s Emmerich facility, supporting reliable supply and product consistency. Discuss your measurement requirements with Metav Werkzeuge in Emmerich: contact info@metav-werkzeuge.com or call +49 2822 7131930 to review how the Metav IndustryLine digital height gauge fits specific inspection workflows Technical data SKU: M219.098 GTIN: 4054469168784 ECLASS: 21170334 Customs tariff number: 90173000 Facts Measuring range: 0–600 mm Resolution (display): 0.01 mm Resolution (inch): 0.0005 in Accuracy: 0.05 mm Weight: 8 kg Measuring system: Absolute with 3 V Special features Material: stainless steel Handwheel for fine adjustment Carbide scribing tip Data output: RB 6 (digital indicator connection) Digital functions: ON/OFF, mm/inch, HOLD, INC, ORIGIN No measurement speed limitation FAQ What types of tasks is this height gauge suited for? The Metav IndustryLine digital height gauge M219.098 is intended for layout, height comparisons and basic inspection on medium to large components, offering a balance of reach and workshop robustness. How accurate and resolute is the instrument? The instrument provides a 0.01 mm display resolution with a stated accuracy of 0.05 mm, which supports routine production control and incoming inspection where this level of precision is acceptable. Can the gauge interface with data collection systems? Yes, the gauge offers an RB 6 data output for connection to compatible digital indicators and data acquisition units, enabling straightforward digital logging of measurements. Is the scribing tip suitable for repeated marking? The fitted carbide scribing tip is designed for durable marking on a range of materials and maintains a defined point for repeatable layout work. What makes this instrument suitable for workshop use? A stainless‑steel construction, controlled handwheel adjustment and the absence of a measurement speed limit combine to provide robust, high‑throughput operation appropriate for daily shopfloor tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Height Gauge With Fine Adjustment Wheel, Stainless Steel, 0.01mm Resolution - Metav IndustryLine
Combine precise 0.01 mm resolution, robust stainless steel construction and a 600 mm measuring range for dependable inspection results and stable workshop handling; order the Digital Height Gauge M219.058 directly via Metav Werkzeuge or consult our specialists for application-specific advice. Digital Height Gauge M219.058 — 600 mm stainless steel, 0.01 mm display (Metav IndustryLine) The Digital Height Gauge M219.058 is a workshop-grade, large-range height measuring instrument designed for inspection, setup and layout tasks where repeatable vertical measurement and controlled scribing are required. Digital readout 0.01 mm resolution Stainless steel construction for durability Fine handwheel for controlled height setting Up to 600 mm measuring range Improved measurement reliability through fine resolution and repeatability The large-format instrument combines a 0.01 mm display resolution with a stated accuracy of ±0.05 mm, delivering measurements that meet everyday workshop and inspection requirements with confidence. The high-resolution readout on the digital display reduces reading errors and speeds up quality checks, while the preset and zero functions allow quick reference setting for repetitive tasks. This setup is particularly useful for simple production control, fixture set-up and measurement documentation, where clear numeric feedback reduces interpretation time and improves throughput. Robust construction and controlled adjustment for stable results Built from stainless steel, the gauge offers mechanical stiffness and corrosion resistance that help maintain measurement integrity in industrial environments. The integrated handwheel provides fine, measured approach to the scribing tip and improves positional control compared with coarse feed systems; combined with the instrument’s mass (weight 8.25 kg) this reduces vibration and enhances stability during long vertical strokes. The carbide scribing tip is suitable for repeat layout work and resists wear, extending service life and lowering total cost of ownership in frequent-use scenarios. Practical digital functions and data output for documentation Operation is simplified by the clearly labelled digital display with ON/OFF, mm/inch, zero and preset keys, enabling rapid unit changes and reference resets for staged processes. A dedicated RB 5 data output is provided for direct transfer of measurements into data-collection systems or inspection software, supporting traceability and reducing manual transcription errors. The combination of intuitive controls and data connectivity makes the tool suitable for both standalone shop-floor checks and integration into basic measurement workflows. Contact Metav Werkzeuge for expert advice or to arrange supply from our Emmerich stock; Metav Werkzeuge can recommend suitable accessories and delivery options for precise workshop integration. Technical Data Article number: M219.058 GTIN: 4054469112114 Tariff number: 90173000 Data output: RB 5 Core data Measuring range: 0–600 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Weight: 8.25 kg Special features Material: stainless steel Fine handwheel adjustment Carbide scribing tip Digital display with ON/OFF, mm/inch, zero, preset Measuring range classification: Large range (500–1,000 mm) FAQ What measuring range does this gauge cover? The gauge covers a measuring range of 0–600 mm, making it a large-range height instrument suitable for mid‑to‑large workshop components. What resolution and accuracy can be expected from the instrument? The device provides a display resolution of 0.01 mm and a stated accuracy of ±0.05 mm, which is appropriate for routine inspection and shop-floor set-up tasks with the Digital Height Gauge M219.058. Is the instrument suitable for everyday workshop use? Yes; the stainless steel construction, substantial mass and handwheel control make it resilient for regular use in production and maintenance environments. How does the data output work and what is RB 5? The unit is fitted with an RB 5 data output for electronic data transfer; this enables direct capture of readings into compatible measurement or documentation systems to reduce manual entry. Is a calibration certificate included as standard? The instrument is supplied with standard factory calibration. An ISO 17025 calibration certificate is not included unless explicitly specified. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Dual-Column Height Gauge With Fine Adjustment, Carbide Scribing Tip, Dial Indicator 0.01mm - Metav IndustryLine
Take advantage of robust stability and clear readout to maintain repeatable scribing and height control across larger workpieces; the combination of a double‑column frame, fine adjustment and a 0.01 mm dial indicator supports reliable workshop performance. Order directly via Metav Werkzeuge or contact the technical team for application advice. Double‑column height gauge, 600 mm (fine adjustment, round scribing needle) — Metav IndustryLine The Double‑column height gauge, 600 mm is a workshop marking and measuring instrument designed for precise height measurement and scribing on medium to large components, offering controlled adjustment and durable construction. Fine-adjustment handwheel for controlled scribing Dial indicator with 0.01 mm resolution Double-counting display for up/down movements Tungsten carbide round scribing needle Consistent accuracy for repeatable scribing and measurement The double‑column marking instrument delivers a measurable accuracy of ±0.05 mm, meeting standard workshop requirements for layout work and rough inspection. The integrated dial indicator with 0.01 mm resolution provides refined readout for fine positioning, while the mechanical construction reduces play and runout typically encountered with single‑column devices. This combination translates into fewer re‑setups and less scrap when transferring heights from drawings to workpieces, improving throughput in routine marking and machine setup tasks. Stable double‑column frame for larger components Engineered as a larger‑range gauge, the unit sits in the large (500–1,000 mm) class with a measuring range of 0–600 mm, which places it squarely in the segment for substantial components and fixtures. The double‑column architecture increases profile stiffness and minimises bending along the slide, so measurements remain reproducible over the full stroke. Constructed from stainless steel, the frame resists workshop contamination and maintains alignment, while the instrument mass (approx. 7.2 kg) adds inherent stability during scribing and hand operation. Precise control and intuitive operation reduce cycle time A dedicated fine adjustment via the handwheel enables micro‑movements without overshoot, aiding accurate transfer of scribe lines and incremental set‑ups. The unit features a double counting mechanism that records travel direction separately for upward and downward moves, simplifying differential measurements and avoiding manual tally errors. The 9x21 clamping secures the carriage during marking or when the machine is idle, and the hand control keeps operation straightforward for an experienced fitter or inspector. Durable scribing and practical workshop applications The round scribing tip is made from tungsten carbide, chosen for its wear resistance and ability to retain a sharp point on steel and similar surfaces; it is suitable for routine layout work in maintenance, toolroom and small batch production. As a mechanical marking gauge with a readable analogue dial, the instrument is particularly well suited where robust, low‑maintenance solution is required rather than full electronic integration. Typical uses include height transfer for machining set‑ups, marking gauge lines on plates and components, and pre‑inspection of assembly interfaces. Choose the Metav IndustryLine double‑column height gauge for robust, repeatable scribing and clear analogue readout — contact Metav Werkzeuge in Emmerich for tailored application guidance or to request a quotation. Technical data Article number: M206.047.T GTIN: 4061905047657 Customs tariff number: 90173000 Facts Measuring range: 0–600 mm Readout resolution: 0.01 mm (dial indicator) Accuracy: ±0.05 mm Weight: 7.2 kg Special features Double‑column construction Stainless steel frame Fine adjustment with handwheel Dial indicator with double counting mechanism Tungsten carbide round scribing needle Analogue operation (mechanical) Clamping: 9x21 FAQ What measuring range does the gauge cover? The measuring range is 0–600 mm, placing the instrument in the large (500–1,000 mm) class for sizeable workshop components. How fine is the dial readout and what accuracy can be expected? The integrated dial indicator shows 0.01 mm graduations and the system delivers an accuracy of ±0.05 mm, suitable for standard layout and machine shop tasks. Is the scribing tip suitable for hardened materials? The round scribing needle is tungsten carbide, offering good wear resistance for marking on steel and similar materials; extreme hardness applications may require a specialised scribe. Does the gauge allow controlled micro‑adjustment during marking? Yes, the fine adjustment with a handwheel provides controlled micro‑movements to position the scribe accurately before locking. What advantage does the double counting mechanism provide? The double counting display records motion direction separately for up and down travel, simplifying differential measurements and reducing manual recording errors. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Height Gauge With Carbide Scriber, Dual-Column, Dual Counter And Dial 0.01mm - Metav IndustryLine
Robust double-column construction and a 0.01 mm dial indicator ensure stable, repeatable scribing across a 600 mm measuring range; the carbide scribing pin and stainless steel body extend service life under workshop conditions. Order the height gauge directly via Metav Werkzeuge or consult our specialists for application advice. Height gauge M206.047 — double-column height gauge, 600 mm range, 0.01 mm dial (Metav IndustryLine) The Height gauge M206.047 is a double-column height gauge designed for precise scribing and height measurement of medium to large-format components in toolrooms, jig making and heavy workshop applications. Double-column design for enhanced stability Dial indicator 0.01 mm with double counter Carbide scribing pin for long wear Stainless steel body; 600 mm measuring range Greater stability for large-component scribing The double-column construction provides a stiffer measuring frame, reducing bending and loss of alignment when working across the full 600 mm travel. The instrument’s mass (about 15.3 kg) and robust base increase resistance to vibration, so marked positions remain consistent between operations. This mechanical stability translates into fewer rechecks and smoother workflow when transferring heights from drawings or templates to workpieces. Fine readout and reliable counting for repeatable results Equipped with an analogue dial indicator with a 0.01 mm graduation and a double counter, the instrument records fine adjustments while separately tracking upward and downward movements. The overall stated accuracy of ±0.05 mm reflects the gauge’s capability to deliver repeatable results for setup and inspection tasks. The handwheel allows controlled approach to the target dimension, while the dial’s clear graduations simplify cross-checking and documentation. Durable materials and toolroom-ready features A carbide scribing pin ensures sharp, long-lasting marking on a variety of surfaces, while the stainless steel construction resists corrosion and keeps running surfaces true. The combination of wear-resistant tip and solid materials minimises maintenance and preserves measuring geometry over extended use. The double counting mechanism supports process control by making incremental adjustments traceable during stepwise setup. Practical advantage in production and workshop contexts Classified in the large-format range (500–1,000 mm), this gauge suits operations that need extended reach without sacrificing stiffness. The instrument’s analogue design is straightforward and dependable in environments where simple, robust metrology tools are preferred; the mechanical dial and handwheel provide tactile feedback that many technicians find valuable for repeatable setups. The result is a practical balance of reach, rigidity and readable resolution for everyday industrial use. Discuss the M206.047 double-column height gauge with Metav Werkzeuge to confirm suitability for specific applications and arrange delivery from Emmerich. Technical data Article number: M206.047 GTIN: 4054469151632 Tariff number: 90173000 ECLASS: 21170334 Numbers / Core technical data Measuring range: 0–600 mm Resolution: 0.01 mm (dial) Accuracy: ±0.05 mm Weight: 15.3 kg Special features / Materials Double-column construction Carbide scribing pin Stainless steel construction Dial indicator with double counter Handwheel operation Analogue readout FAQ What measurements can be taken with this gauge? The Height gauge M206.047 covers scribing and height transfer up to 600 mm and is designed for precise height and layout work on medium to large components. How fine is the readout and what does the counter do? The instrument uses a dial indicator with 0.01 mm graduations; the double counter separately tracks upward and downward traverses to aid repeatability during setups. Is the scribing tip durable for workshop use? Yes, the carbide scribing pin provides long wear resistance and maintains a sharp edge for reliable marking over extended use. Which environments is this gauge intended for? The gauge is suited to toolrooms, machine shops and jig-and-fixture work where a stiff double-column frame and a 600 mm range are advantageous. Does the gauge require special maintenance? Routine cleaning and occasional lubrication of sliding ways are recommended; the stainless steel construction reduces corrosion-related upkeep. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Height Gauge With Dual Columns, Colour 3.5" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high reproducibility, modern data connectivity and an ISO 17025 calibration for reliable quality assurance; order the measurement device directly via Metav Werkzeuge or ask the consultants for application advice and the calibration certificate. Height gauge and scribing device — double-column design with 0–600 mm range and 0.02 mm accuracy (Microtech Metrology) Height gauge and scribing device for workshop and inspection tasks, combining a rigid double-column guide with a colour touchscreen and wireless plus USB data transfer for fast documentation. 0–600 mm measuring range 0.02 mm accuracy specification 3.5" colour touchscreen tablet display Cast iron base for increased stability Repeatable precision for parts inspection and setup The double-column construction and a cast iron base deliver a stable measuring platform that reduces vibration and sag over longer vertical measurements. With a measuring range of 0–600 mm and a stated accuracy of 0.02 mm, the instrument is engineered for repetitive dimension checks and machine setup tasks where consistency matters. The built-in fine adjustment feature simplifies incremental positioning, making single-person operation more efficient while preserving measurement repeatability. These attributes lower rework rates and support faster in-process decisions. Modern data handling that speeds up documentation A 3.5" colour touchscreen presented as a tablet-style interface enables immediate reading and basic on-device controls; for traceable data logging the unit offers Wireless+USB connectivity so results can be exported directly to quality-management software or saved for audit trails. The instrument also provides a high display resolution of 0.001 mm for clear readout of small increments. This digital workflow reduces transcription errors, shortens reporting time and integrates handheld measurement into production data routines with minimal additional training. Calibrated delivery and traceability for quality systems The gauge is supplied fully calibrated in accordance with ISO 17025, and a calibration certificate is included with the delivery. This formal traceability supports compliance with internal quality procedures and external audits. The calibrated status removes initial setup ambiguity and means the device can be put into service for standardised inspection tasks immediately after receipt, improving first-use confidence and reducing downtime associated with third-party calibration. Durable design for industrial shop environments Key wear and contact elements are arranged to withstand typical workshop conditions while maintaining measurement integrity. The double-column guide keeps the measuring slide square under load, and the cast iron base minimises thermal drift and mechanical deformation during extended use. The tablet-style display is mounted for clear visibility without restricting access to the probe area, and the overall construction targets robust daily use in both bench-top inspection and on-machine setup scenarios. Practical benefit summary Combining a broad measuring range, strong mechanical stability and straightforward digital connectivity, this instrument supports faster inspection loops and reliable documentation. The precise readout and fine adjustment reduce operator-induced variation, while ISO 17025 calibration ensures immediate traceability and acceptance within certified quality systems. Contact Metav Werkzeuge for application advice, to request the ISO 17025 calibration certificate, or to discuss integration with existing quality workflows — Metav Werkzeuge is available from Emmerich to support specification and delivery. Technical data Article number: 144306271 GTIN: 4061905047732 Manufacturer: Microtech Metrology Facts Measuring range: 0–600 mm Accuracy: 0.02 mm Display resolution/readout: 0.001 mm Display: 3.5" colour touchscreen Data output: Wireless + USB Calibration: ISO 17025 with certificate Special features Cast iron base Double-column guide Tablet-style digital display Fine adjustment mechanism Digital instrument for workshop and inspection use FAQ What measuring range does the device cover? The instrument covers a measuring range of 0–600 mm, making it suitable for medium to large components and fixtures. What is the stated accuracy and resolution? The device is specified at 0.02 mm accuracy with a display resolution of 0.001 mm, supporting precise dimension checks. Is the gauge delivered calibrated? Yes — the gauge is supplied calibrated in accordance with ISO 17025 and includes a calibration certificate with delivery. How are measurement results exported? Measurement data can be transferred via Wireless or USB connections for documentation and integration into quality systems. Is the design suitable for heavy workshop use? The combination of a cast iron base and a double-column guide provides stability and robustness for daily inspection and setup tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
600mm Height Gauge With Readout Magnifier, Carbide Scriber, Adjustable Scale, Fine Adjustment, DIN 862 - Metav IndustryLine
Take advantage of a robust layout instrument that combines a 600 mm measuring range, a carbide scribing needle and a precise fine-adjustment mechanism for reliable workshop marking; order the gauge directly via Metav Werkzeuge or contact their consultants for application advice. Height gauge M206.044.1 – 600 mm analogue height gauge with carbide scribing needle (Metav IndustryLine) The M206.044.1 height gauge is an analogue layout instrument designed for marking and setting out larger components in machine and tool workshops, offering a clear vernier readout and a magnifying lens for improved legibility. 600 mm measuring range for large components Carbide scribing needle for durable marking Fine adjustment and adjustable scale for precise settings Precision for heavy‑duty layout work This layout instrument delivers measured control across a 600 mm span with an accuracy of 0.07 mm and a vernier reading of 0.05 mm, conforming to DIN 862 for mechanical gauges. The analogue vernier principle gives direct, tactile feedback when setting heights, which is often preferred in production environments where fast, repeatable adjustments are required. The combination of stable mechanics and defined reading steps reduces setup time and supports consistent results across batch runs. Built for workshop durability and repeatable marks Constructed from special tool steel, with scale and vernier matt chrome-plated for long-term corrosion resistance, the instrument is engineered to withstand workshop conditions. The carbide scribing needle guarantees crisp, long-lasting layout lines on ferrous and non-ferrous materials, while the substantial instrument mass (approx. 11.5 kg) and robust mounting profile ensure stability during marking. With a measuring range that places it in the "Mit Gross" class, this gauge is suited to large fixtures, heavy workpieces and general heavy‑duty marking tasks. Practical features that speed up everyday tasks The integrated magnifying lens enhances legibility of the vernier for precise readings, while the fine adjustment mechanism allows micro‑movement corrections without losing reference. The scale is easily adjustable to compensate for wear or to set offsets, and the 12 x 30 clamp secures the slider reliably. These features cut rework by allowing controlled, confident scribing and quicker alignment — a rational improvement that saves time on repetitive layout jobs. Where this instrument adds value and how to care for it Ideal for machine shops, jig and fixture production, and heavy fabrication, the gauge supports accurate transfer of heights and datum lines across large components. Routine maintenance is straightforward: keep the guide ways clean, protect the carbide needle when not in use and check the clamping screws for secure fixation. The mechanical design eases onsite calibration checks against gauge blocks; traceable calibration can be arranged through Metav for users requiring documented verification. Secure robust layout performance from Metav IndustryLine — order the M206.044.1 via Metav Werkzeuge and consult the Emmerich team for specification matching and integration into existing processes. Technical data SKU: M206.044.1 GTIN: 4054469102863 Manufacturer: Metav IndustryLine Facts Measuring range: 0–600 mm Reading (vernier): 0.05 mm Accuracy: 0.07 mm Weight: 11.5 kg Clamp: 12 x 30 Standard: DIN 862 Special features Material: special tool steel Scale and vernier: matt chrome-plated Carbide (hardmetal) scribing needle Fine adjustment mechanism Adjustable scale Magnifying lens (reading loupe) Analogue vernier instrument Category: Mit Gross — long bar gauge for large components FAQ What is the measuring range of the instrument? The M206.044.1 height gauge offers a measuring range of 0–600 mm, suited to larger components and fixtures. How precise is the reading and overall accuracy? The vernier reading increments are 0.05 mm with an overall stated accuracy of 0.07 mm under the DIN 862 standard for analogue gauges. Which materials can be marked with the scribing needle? The gauge’s carbide scribing needle is suitable for marking a wide range of materials commonly encountered in workshops, including steel and non‑ferrous metals. Is the scale adjustable and can fine adjustments be made? Yes, the instrument includes an adjustable scale and a fine‑adjustment mechanism to permit micro corrections without disturbing the main setting. What workshop applications suit this gauge best? This instrument is targeted at machine shops, fixture and jig making, heavy fabrication and any application requiring precise, repeatable height transfer over large workpieces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Scribing Needle 10x8.3mm Profile, M5x13mm Mounting - Metav IndustryLine
Take advantage of precise, repeatable scribing and a secure M5 attachment for reliable layout work; the compact dimensions and light weight ensure easy handling in confined setups. Order the replacement scribing needle directly via Metav Werkzeuge or consult our specialists for application advice. M206.041.A2 — Scribing needle (replacement tip) with M5 attachment by Metav IndustryLine The M206.041.A2 is a replacement scribing needle engineered for use with the 206.041 height scriber; it serves as a precise layout tip for marking, scoring and fine positioning tasks in workshop and inspection environments. Precision scribing tip for fine layout work Secure M5x13 mounting for repeatable attachment Compact 60 mm length for tight access Accurate marking where it matters The needle provides a focused contact point for consistent layout lines, turning repeat measurements into a predictable process. With overall length 60 mm and a compact head dimension of 10 x 8.3 mm, the tip is suited to confined setups and detailed scribing tasks. The light mass (0.1 kg) reduces inertial effects when swapping or adjusting the tip, while the defined mounting interface preserves alignment and repeatability across operations. Robust attachment and operational reliability A standard M5x13 fastening ensures the needle seats firmly in the scriber head, reducing lateral play and eliminating guesswork during fixture changes. The clearly specified attachment geometry simplifies tool preparation in production and inspection routines, allowing technicians to maintain fast changeover times and stable positioning without bespoke adapters. This mechanical clarity supports higher throughput and fewer rework cycles. Compatibility and workshop benefits Designed as a direct spare part for the 206.041 height scriber, the tip integrates seamlessly into existing setups and supports traditional scribing tasks on workpieces that require precise reference marks. The accessory delivers practical benefits: dependable repeatability for layout operations and compact dimensions that improve access to narrow features. For organisations seeking a straightforward replacement part, the component offers an efficient route to maintain measurement and marking capability without system redesign. Order replacement parts from the Metav IndustryLine via Metav Werkzeuge for immediate supply and expert guidance — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support Technical data SKU: M206.041.A2 GTIN: 4054469160597 Customs tariff number: 90179000 Weight: 0.1 kg Dimensions (BxH): 10 x 8.3 mm Overall length L1: 60 mm Attachment: M5x13 mm Facts Length: 60 mm Weight: 0.1 kg Head size: 10 x 8.3 mm GTIN: 4054469160597 Customs tariff: 90179000 Special features Compatibility: height scriber 206.041 Category: Height scriber accessory Label: Replacement scribing needle UID: M206.041.A2 FAQ What is the M206.041.A2 used for? The M206.041.A2 is a replacement scribing needle intended for precise marking and layout when fitted to the 206.041 height scriber. Does this needle fit other scribers? The scribing needle is specified for the 206.041 height scriber; compatibility with other models depends on matching the M5x13 attachment and seating geometry. What are the exact mounting dimensions? Mounting is via an M5x13 fastening; overall length is 60 mm and the head measures 10 x 8.3 mm. Is the needle supplied ready for use? The needle is supplied as the spare tip component; fitting requires standard workshop tools to secure the M5 attachment in the scriber head. How does the design benefit workshop workflows? The compact head and low mass reduce handling effort and improve access to confined features, while the defined M5 attachment delivers repeatable positioning across tool changes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
620mm Height Gauge With 3D Probe, Colour 3.5" Touchscreen, ISO 17025 Calibrated Wireless+USB - Microtech Metrology
Benefit from a robust combination of an integrated 3D probe, a 3.5" colour touchscreen and wireless + USB data transfer for faster, traceable height measurement. Delivered fully calibrated to ISO 17025 with certificate, this instrument increases process reliability and simplifies inspection workflows — order the device directly via Metav Werkzeuge or consult our specialists for application advice. Height measuring and scribing device – height gauge with integrated 3D probe and 3.5" touchscreen (Microtech Metrology) Height measuring and scribing device is a compact, industrial-grade instrument for precision height measurement and scribing tasks across workshop and production settings. Integrated 3D probing system 3.5" colour touchscreen display Wireless and USB data output ISO 17025 calibration included Measurement range 20–620 mm Reproducible inspection results for production control The instrument delivers repeatable measurements thanks to its specified accuracy ±0.015 mm, which supports tighter in-process tolerances and reliable conformity checks. Supplied fully calibrated to ISO 17025, the device comes with an official calibration certificate that documents traceability and measurement uncertainty for quality audits. This level of documented calibration reduces administrative effort during supplier qualification and simplifies the integration of measurement data into quality management routines. Streamlined digital workflow and straightforward data handling Equipped with a 3.5" colour touchscreen and digital electronics, the unit supports clear visualisation of measured values and simple on-device operation. The electronics offer a display resolution of 0.001 mm, enabling fine readback where finer control is required. Wireless and USB outputs provide flexible connectivity to inspection software or a shop-floor computer for data logging and SPC. These interfaces reduce manual transcription errors and speed up reporting, improving overall inspection throughput and traceability. Flexible probing and extended reach for larger components The built-in 3D probe allows precise contact measurements and facilitates scribing tasks where multi-axis probing is beneficial. The standard measuring span reaches 20–620 mm, covering many medium-to-large components; an optional extension increases the range to 20–800 mm for greater versatility. This configuration is particularly suited to jigs, fixtures and assemblies that require vertical measurement over an extended travel while retaining probe accuracy and repeatability. Speak to Metav Werkzeuge for tailored specifications and to request a certified datasheet or quotation for the Microtech Metrology height measuring and scribing device (SKU 144306281); phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 144306281 GTIN: 4061905456947 Manufacturer: Microtech Metrology eClass: 21170334 Numbers Measuring range: 20–620 mm Minimum measuring range: 20 mm Maximum measuring range: 620 mm Accuracy: 0.015 mm Display resolution: 0.001 mm Special features Digital colour 3.5" touchscreen Data output: Wireless and USB Integrated 3D probing system Delivered calibrated to ISO 17025 with certificate Optional extension to 20–800 mm FAQ What accuracy can be expected from this height gauge? The Microtech Metrology height measuring and scribing device provides an accuracy of 0.015 mm as specified, delivering reliable repeatability for standard workshop and production measurement tasks. Is the instrument delivered calibrated and traceable? Yes. The device is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability and quality documentation. Which interfaces are available for data transfer? The instrument offers both wireless and USB data outputs to integrate measurement data into inspection software or data-logging systems. Can the measuring range be extended for larger parts? An extension is available that increases the measuring span to 20–800 mm, allowing measurement of larger assemblies while maintaining probe functionality. Does the device support fine readback for precision inspection? The digital electronics provide a display resolution of 0.001 mm, enabling fine measurement readback suitable for precise inspection and scribing operations. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
75x25.4 mm Scriber Needle 6x8 Shank Clamp 6x18 For Height Scriber Models 219.055/219.056 - Metav IndustryLine
Compact 6×8 mm cross‑section and 75 mm effective length deliver precise, low‑profile marking for height gauges; compatibility with models 219.055 and 219.056 ensures straightforward replacement and minimal downtime. Order directly via Metav Werkzeuge or contact our consultants for application advice. Anreißnadel M219.055.A1 – Scriber Needle for Height Scriber, 6×8 mm, 75 mm (Metav IndustryLine) The Anreißnadel M219.055.A1 is a replacement scriber needle for digital height gauges and marking devices, designed for precise scribing and direct fit to models 219.055 and 219.056. Compatible with 219.055 and 219.056 Compact 6×8 mm cross section 75 mm effective length for marking access Robust replacement scriber needle Precision scribing in tight spaces The slender 6×8 mm cross section and the 75 mm effective length make this replacement needle ideal where access is limited and visual interference must be minimised. The compact geometry reduces the contact footprint during marking, which helps to maintain consistent line definition on small edges and thin sheets. For workshops requiring repeatable scribing steps, the slim profile supports accurate alignment with standard height gauges while limiting disturbance to adjacent features. Reliable fit and quick replacement reduce downtime Designed as a direct-fit replacement for established height scribers, the needle accommodates the original clamping arrangement (6×18 clamp interface), enabling quick exchange without modification. The lightweight construction (approx. 0.1 kg) and defined interface mean that the marking tool is restored to service with minimal adjustment, cutting maintenance time. This functional design focuses on productivity: consistent performance during repetitive marking cycles contributes to a smoother workflow on the shop floor. Practical compatibility and workshop benefits The replacement needle suits applications in marking and scribing operations for production and maintenance tasks where repeatability matters. Compatibility with the specified gauge models ensures that measurement chains and calibration routines remain intact. Supplied as a straightforward replacement part with a clear article identifier and GTIN, the component is easy to log in inventory systems and trace across procurement processes, supporting quality assurance and traceability in standard workshop practice. For a reliable replacement needle matched to models 219.055/219.056, contact Metav Werkzeuge to arrange supply and confirm suitability for the intended marking application. Technical data Article number: M219.055.A1 SKU: M219.055.A1 GTIN: 4054469160818 Tariff number: 90179000 Label: Anreißnadel für 219.055 und 219.056 BxH:6x8, L1xH1:75x25,4 mm (Klemmung 6x18) Dimensions & measures Cross section: 6×8 mm Effective length: 75 mm L1×H1: 75×25.4 mm Weight: 0.1 kg Compatibility & features Compatible with models 219.055 and 219.056 Category: Height scriber / marking needle Intended use: scribing and marking with height gauges Manufacturer brand: Metav IndustryLine FAQ Is this needle compatible with existing 219.055 gauges? Yes. The Anreißnadel M219.055.A1 is specified for direct compatibility with models 219.055 and 219.056 and uses the original clamp interface. What are the exact dimensions of the needle? The needle has a cross section of 6×8 mm and an effective length of 75 mm (L1×H1: 75×25.4 mm), suitable for confined marking tasks. Is the material specified for the needle? Material is not specified in the provided product data for the Anreißnadel M219.055.A1; please consult Metav Werkzeuge for detailed material information if required. Can this part be logged in traceability systems? Yes. The part includes a GTIN (4054469160818) and a clear article number (M219.055.A1) for inventory and traceability purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
77x17 mm Scriber Needle For Height Gauge With 9x11 Blade, Clamp 9x23 - Metav IndustryLine
Take advantage of a precise 9×11 mm scribing tip combined with a secure 9×23 mm clamping for repeatable layout lines; the compact 77 mm length minimises setup time and keeps handling efficient. Order the scribing needle directly via Metav Werkzeuge or consult our specialists for application guidance. Scribing needle for 206.043 (BxH 9×11 mm) — Metav IndustryLine The Scribing needle for 206.043 (BxH 9×11 mm) is a compact marking stylus intended for use with height gauges, designed to produce clear, reproducible scribe lines for layout and machining preparation across workshop environments. Precision scribing tip 9×11 mm Compact 77 mm overall length Secure clamping 9×23 mm Made for height gauge 206.043 Engineered for repeatable, high-contrast scribing The replacement stylus delivers consistent layout lines thanks to its defined tip geometry and specified dimensions. The 9×11 mm dimension describes the contact face of the tip and ensures a well‑shaped scribe mark that remains visible after light finishing; this helps reduce rework and accelerates first‑operation checks. Designed for routine workshop use, the component supports efficient marking workflows by providing a predictable contact behaviour that improves reproducibility between operators and shifts. Secure fit and fast replacement for less downtime A decisive practical benefit is the 9×23 mm clamping interface, which gives a stable mechanical connection to the corresponding height gauge mount. The clamping size denotes the fit dimensions used by the gauge clamping jaw, so correct insertion yields minimal play and reliable line placement. The overall 77 mm length balances accessibility at the tool face with compact handling, enabling quick swaps during job changes and thus shortening machine or inspection stand preparation times. Compact design that simplifies handling and setup Low mass and a concise form factor make the stylus uncomplicated to handle during repetitive marking tasks; the small footprint reduces the risk of interference when working in confined fixture areas. The item is listed with a GTIN and tariff code for clear inventory and customs processing, supporting structured procurement and traceability. As part of the Metav IndustryLine range, the component is positioned to meet workshop standards for robust, straightforward marking accessories that integrate into existing height gauge setups. Choose the Metav IndustryLine scribing needle for secure compatibility with height gauge 206.043 and prompt dispatch from Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for order and logistic details Technical Data Article number: M206.043.A1 Label: Scribing needle for 206.043 BxH:9x11, L1xH1:77x17 mm (clamping 9x23) GTIN: 4054469146126 ECLASS: 21049238 Category path: Messgeräte › Höhenreisser Facts Overall length: 77 mm Tip dimensions (BxH): 9 × 11 mm Clamping dimension: 9 × 23 mm Weight: 0.1 kg Tariff code: 90179000 Special features Compatible with height gauge 206.043 Compact, low‑mass design for confined work areas Clear inventory identification by GTIN and article number FAQ What do the dimensions 9×11 mm indicate? The 9×11 mm specification refers to the tip contact face (width × height) of the scribing needle supplied as article M206.043.A1, determining the shape and visibility of the scribe line. Is this needle compatible with height gauge 206.043? Yes — the scribing needle is designed for use with height gauge 206.043 and features a clamping interface to match that model. How is the needle fixed in the gauge? Fixing is achieved via the 9×23 mm clamping interface, which provides a secure mechanical fit once inserted into the gauge clamping jaw. What are the overall length and weight of the stylus? The component measures 77 mm in overall length and has a mass of approximately 0.1 kg, as indicated for article M206.043.A1. What is the customs tariff number for this item? The customs tariff number listed for this scribing needle is 90179000. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
78mm Punch Tip 8.5x9mm Round Head, Clamping 9x21 - Metav IndustryLine
Precise scribing for repeatable layout work thanks to the round tip, compact footprint and secure clamping 9×21 — compatible with height gauges 206.045–206.047. Order the replacement directly via Metav Werkzeuge or contact our consultants for fitment advice and delivery options. M206.045.A1 Scribing Needle — Round tip, clamping 9×21 (Metav IndustryLine) A M206.045.A1 Scribing Needle designed for accurate marking on compatible height gauges 206.045–206.047, intended for workshop layout, inspection benches and toolroom use. Round tip for precise marking Compatible with height gauges 206.045–206.047 Secure clamping 9×21 for stable mounting Compact dimensions 78×35 mm for tight setups Accurate marks for reliable layout work The accessory delivers precise marking by concentrating contact force through a round tip, producing clear scribe lines that guide subsequent machining or inspection steps. Its compact cross-section (BxH 8.5×9 mm) and low profile minimise interference with fixtures and workpieces, which supports faster set-up and fewer re-measurements. In practice, clean, repeatable lines reduce downstream errors and rework — a direct contribution to process efficiency and quality control. Stable mounting that preserves alignment Secure attachment is essential for reproducible layout results; the integrated clamping 9×21 provides a firm mechanical interface with the gauge head so the marking element remains aligned during operation. The overall length and head dimensions (78×35 mm) balance reach with rigidity, offering a mounting solution that resists lateral play. This stability ensures that each scribe is consistent, which is particularly valuable when transferring datum lines across multiple components or during batch inspection. Built to fit standard height gauges and workshop routines Compatibility with models 206.045–206.047 makes this needle a straightforward spare or upgrade for established benches. The design focusses on uncomplicated fitment and interchangeability, avoiding lengthy adjustments after replacement. The accessory is therefore well suited to maintenance schedules and quick-change routines in manufacturing environments where minimising downtime is a priority. Traceable identification (GTIN available) aids inventory control and reordering in procurement systems. Contact Metav Werkzeuge to request the M206.045.A1 scribing needle from Metav IndustryLine or to discuss compatibility and delivery with our technical consultants Technical data Article number: M206.045.A1 GTIN: 4054469151649 ECLASS: 21049238 HS Tariff number: 90179000 Facts Dimensions (BxH): 8.5×9 mm L1×H1: 78×35 mm Clamping: 9×21 mm Weight: 7.2 kg Special features Round tip for clear scribe lines Compatible with height gauges 206.045–206.047 Category: Height gauge scribing accessory Label: Anreißnadel for height gauges with double columns FAQ What height gauges does this needle fit? The M206.045.A1 scribing needle is compatible with height gauges 206.045–206.047 and is intended as a direct replacement or spare for those models. How is the needle mounted to the gauge? Mounting uses the specified clamping 9×21, which secures the needle head and provides a stable, repeatable fit with the corresponding gauge accessory slot. What type of marks does the round tip produce? The round tip produces clear, concentrated scribe lines suitable for layout and machining transfer, providing visible guidance without excessive material removal. Is the needle suitable for heavy industrial use? The M206.045.A1 is designed for routine workshop and inspection use, offering a balance of compact dimensions and stable clamping for consistent layout tasks. Can the needle be identified for reordering in inventory systems? Yes — the accessory is supplied with GTIN 4054469151649 and article number M206.045.A1 for clear identification and procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
78mm Scriber Needle Rounded Flat Tip BxH 8.5x9 mm, Clamp 9x21 - Metav IndustryLine
Take advantage of the combination of precise marking, secure clamping and simple compatibility for dependable layout work; order the scribing needle directly via Metav Werkzeuge or consult our specialists for technical matching and delivery options. M206.045.A2 Scribing Needle for Height Gauges – Rounded Tip, 78 mm Length (Metav IndustryLine) The M206.045.A2 is a replacement scribing needle designed for use with height gauges and double‑column marking devices, providing a rounded tip and a compact, flat profile for consistent layout marking. Rounded tip for precise scribing Flat profile for stable contact 78 mm length for standard height gauges Clamping 9×21 mm for secure fit Precise marking where it matters The rounded tip and compact geometry of this scribing needle deliver consistent, legible scribe lines, which simplifies subsequent machining or inspection steps. The tip geometry reduces the tendency to gouge or chatter on contact, producing a reliable reference line for layout and quality‑control tasks. Thanks to the flat profile, the needle maintains stable contact against vertical surfaces, supporting repeatable marks even during extended marking sessions. Secure mounting and straightforward replacement Designed with a 9×21 mm clamping interface, the needle fits into the designated holder with a firm mechanical grip that minimises play and backlash. The overall length of 78 mm and the L1×H1 proportion (78×15.3 mm) match common height‑gauge accessory dimensions, enabling rapid replacement and short downtime in the workshop. This mechanical compatibility reduces adjustment time and helps maintain throughput on production lines where quick part changes are required. Practical workshop applications and reliability Ideal for routine layout on machined parts, jigs and fixtures, the needle suits marking tasks in metalworking and toolmaking where clear scribed references are required. Compatibility with the listed height‑gauge models ensures the component integrates into existing metrology setups without custom adaptation. Supplied under the Metav IndustryLine umbrella, the accessory benefits from established procurement and distribution channels, bringing dependable availability and consistent quality to everyday marking operations. Contact Metav Werkzeuge today for supply and compatibility confirmation of the M206.045.A2 scribing needle and secure delivery from Emmerich via phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M206.045.A2 GTIN: 4054469156309 Category: Height gauges Facts Length: 78 mm Tip B×H: 8.5×9 mm L1×H1: 78×15.3 mm Clamping: 9×21 mm Weight: 7.2 kg Tariff code: 90179000 Special features Rounded tip Flat profile Compatible with models 206.045–206.047 and 219.066–219.068 Brand: Metav IndustryLine FAQ Which height gauges is this needle compatible with? The M206.045.A2 scribing needle is compatible with the series listed in the product label, specifically models 206.045–206.047 and 219.066–219.068, allowing direct replacement in those height‑gauge holders. How is the needle secured in the height gauge? The needle is secured using a 9×21 mm clamping interface; this size provides a stable mechanical fit that reduces play during marking operations. What advantages does the rounded tip offer? A rounded tip produces clear, continuous scribe lines while reducing the risk of material gouging or edge chipping, which helps preserve component quality and improves repeatability of marks. Are the needle’s dimensions suitable for standard marking workflows? Yes, the overall length and profile (78 mm; 78×15.3 mm for L1×H1) conform to common accessory dimensions for height gauges, making it suitable for typical workshop layout and marking tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
78x15.3 mm Scriber Needle Flat Tip 8.5x9 Clamp 9x21 - Metav IndustryLine
Take advantage of precise layout marking and a secure clamping fit provided by the flat-profile scribing needle; its 78 mm reach and compatible clamp size ensure repeatable scribing on corresponding height gauges — order the replacement directly via Metav Werkzeuge or consult the Metav team for application advice. M206.045.A0 Scribing Needle – Flat profile for height gauges (Metav IndustryLine) The M206.045.A0 is a flat scribing needle designed for use with two‑column height gauges, supplying a stable marking point for layout work and workshop set‑up. Flat profile for fine scribing Compatible with 206.045–47 and 219.066–068 Length 78 mm for precise reach Clamping 9×21 mm for secure fit Accurate layout marking that improves setup reliability The flat needle geometry delivers a defined scribe line with predictable contact behaviour, which reduces the need for repeat measurements and speeds up initial part set‑up. The combination of a compact B×H cross‑section (8.5 × 9 mm) and a longer L1 dimension (78 × 15.3 mm) gives a controlled penatration angle on the workpiece, making the component transfer from drawing to blank more exact. This results in fewer reworks and a smoother flow through machines and fixtures. Secure fit and exact compatibility for minimal play Designed for direct replacement, the needle uses a 9×21 mm clamping seat to deliver a positive, wobble‑free connection to the height gauge head. Compatibility with the listed models (206.045–47 and 219.066–068) simplifies parts management and reduces downtime during tool changes. The robust clamping interface ensures that each mark remains consistent across repeated cycles, which supports tighter tolerances in downstream machining operations. Practical handling and workshop benefits With a nominal mass of approximately 0.1 kg and a 78 mm working length, the scribing needle is light to handle yet long enough to reach recessed features or through fixtures without awkward manipulations. The flat form factor minimises snagging and allows controlled orientation when laying out complex geometries, delivering confident visual references for subsequent machining or quality checks. Contact Metav Werkzeuge for tailored advice on integrating the M206.045.A0 into existing height gauges or for ordering from our Emmerich facility — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: M206.045.A0 GTIN: 4054469160658 Customs tariff number: 90179000 Manufacturer: Metav IndustryLine Numbers / Core technical data Weight: 0.1 kg Overall length: 78 mm Cross-section B×H: 8.5 × 9 mm L1 × H1: 78 × 15.3 mm Clamping seat: 9 × 21 mm Special features / Versions Flat profile for defined scribe lines Compatible with models 206.045–47 and 219.066–068 Category: height scriber replacement part FAQ Is the M206.045.A0 compatible with my height gauge model? The M206.045.A0 is compatible with the listed height gauge variants 206.045–47 and 219.066–068; its 9×21 mm clamping seat matches the specified gauge head fittings. How is the needle mounted and secured? Mounting is by the specified clamping seat; the 9×21 mm clamp provides a secure, low‑play fit that keeps the marking point stable during repetitive scribing. What reach and marking behaviour can be expected? With a 78 mm working length and a flat cross‑section, the needle offers controlled reach and a clear, repeatable scribe suitable for layout marking and fixture alignment. Can the M206.045.A0 be used for different materials? The needle is intended as a layout tool on workpieces and tooling; suitability for specific materials or finishes depends on the marking technique and the workpiece surface preparation. What is supplied with the article? The article is listed as the replacement scribing needle (SKU M206.045.A0) for the corresponding height gauges; consult product details for information on packaging or accessory items. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Work with pinpoint accuracy using a robust height gauge
A height gauge (also available as a height scribe or surface gauge) provides millimetre-precise layout and height measurement for metalworking and precision hobby tasks. Designed with a heavy stand for a stable base, these scribing instruments make it straightforward to mark straight, repeatable lines and to check parallel heights on components.
Why a height gauge is essential in the workshop
Height gauges serve as both measuring and marking tools: the fixed stand and adjustable scriber translate fine dial or digital readings into an accurate layout on metal surfaces. The scribing pin, typically offered in carbide, steel or brass, allows either durable marking or gentle, non-damaging scribing where only a faint line is required. Units are available as digital, analogue or with a dial indicator, and they cover measurement ranges up to 1000 mm. Digital models permit quick zeroing and easy switching between millimetres and inches, while analogue versions offer uninterrupted operation without batteries.
Clear performance gains for production and workshop use
- Stable, repeatable setups thanks to the heavy base and optional magnetic base for ferrous workpieces.
- Reduced marking and rework time through a precise carbide scribing pin and fine adjustment.
- Flexible measurement range up to 1000 mm, covering bench and tall-part applications.
- Lower measurement errors with digital display functions: zeroing and unit conversion.
- Reliable analogue alternatives when battery-free operation is required.
Metav: practical precision for every workshop
Metav combines decades of measurement expertise with a comprehensive range that makes high-precision tools accessible to industry and craft alike. From Emmerich, Metav acts as a quality filter for the European market, supporting consistent supply and trusted delivery. Choosing Metav’s selection of height gauges means centralised access to tested instruments and technical variety, from analogue surface gauges to feature-rich digital height scribing systems.
In short, a height gauge (height scribe / surface gauge) is the straightforward solution for accurate marking and height measurement that improves workflow and reduces errors.
FAQ
What measurement range do height gauges cover?
Height gauges commonly cover ranges up to 1000 mm, making them suitable for both small bench work and larger components; Metav stocks models across this range to suit workshop needs.
Which scribing pin material should I choose?
Choose a carbide scribing pin for durability on hard metals, steel for general use, or brass when a non-damaging, light mark is required; the height gauge can be supplied with the appropriate pin for the application.
What advantages do digital height gauges offer over analogue?
A digital height gauge offers fast zeroing, reduced reading errors and simple switching between millimetres and inches, which speeds setup and increases measurement reliability.
Is a magnetic base necessary?
A magnetic base adds stability when working with ferrous parts, reducing vibration and the need for re-clamping; choose magnetic or non-magnetic bases depending on your material mix.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com