Precise height scribers for exact layout and measurement
Height scribers and marking gauges provide millimetre-accurate layout and height measurement for metalworking, combining a stable heavy base—often magnetic for extra hold—with a hardened scriber needle to leave fine, controlled lines on workpieces. Used for setting parallels, layout work and vertical measurement up to large ranges, these devices are available as digital units with easy-to-read displays and unit switching or as analog models and dial-equipped variants that need no power. The design ensures repeatable, stable reference points for machining and fabrication, while options such as brass needles protect delicate surfaces when required.
0-60mm Universal Centre Punch Tip 6×8mm Shank Carbide Conical Tip Ø10mm×60° Height Adjustable - Metav IndustryLine
The adjustable Universal scribe and centring point M219.101 combines a solid carbide conical tip and a compact 6 x 8 mm shank for dependable centring and scribing across workshop height gauges. Benefit from the variable clearance (0–60 mm) and precise tip geometry for repeatable mark‑making; order the tool directly via Metav Werkzeuge or consult the specialists if tailored advice is required. Universal scribe and centring point M219.101 — adjustable height attachment for height gauges and scribing devices (Metav IndustryLine) Universal scribe and centring point M219.101 designed for precise centring, scribing and measuring of bore distances on common height gauges and scribing equipment Adjustable standoff height 0–60 mm Solid carbide conical tip Ø10 mm, 60° Shank 6 x 8 mm for standard holders Compatible with height and scribing devices Repeatable marks through controlled geometry and material The attachment delivers consistent centring and scribing because of its solid carbide conical tip (Ø10 mm, 60°) and the engineered contact geometry. The carbide tip retains edge form far longer than tool steel, which reduces the need for frequent replacement and supports uninterrupted production. The adjustable clearance between the contact face and the scribing point (0–60 mm) allows the same accessory to be used across a wide range of set‑ups while maintaining a stable reference height, which increases throughput and reduces set‑up time. Seamless integration with workshop measuring equipment Designed for straightforward fitting, the unit features a 6 x 8 mm shank that matches common collet and holder standards in height gauges and scribing devices. Compatibility with widely used equipment means fewer specialised spares and faster changeovers on the shop floor. The accessory is suitable for determining centre distances of bores as well as for general scribing tasks, enabling one insert to serve multiple metrology and layout operations and thus improving operational efficiency. Practical operation, handling and longevity Adjustment of the standoff height is simple and provides a clear functional range down to a minimum height of 5 mm to the baseline, which is useful for tight clearances. The compact design and low mass (approx. 0.1 kg) aid handling and reduce disturbance to delicate setups. Built from solid carbide, the tip resists wear during repeated contact marking and guarantees longevity under normal workshop use, making the accessory a cost‑effective choice for frequent scribing and centring operations. Contact Metav Werkzeuge for expert advice or to request the M219.101 adjustable centring point and discuss compatibility with existing height gauges at our Emmerich facility Technical Data Article number: M219.101 GTIN: 4054469164786 Customs tariff number: 90178090 Facts Tip diameter: Ø10 mm Tip angle: 60° Adjustable range: 0–60 mm Minimum height to baseline: 5 mm Weight: 0.1 kg Special features Material: solid carbide conical tip Shank: 6 x 8 mm Compatibility: all common height gauges and scribing devices, suitable for measuring bore distances Height of support is adjustable; adjustable distance between contact face and scribing point 0–60 mm FAQ What material is the scribing tip made from? The scribing tip is made from solid carbide, offering high wear resistance and long service life for the Universal scribe and centring point M219.101. Is the height adjustable and what is the range? Yes — the attachment provides an adjustable clearance between the contact face and the scribing point from 0 to 60 mm, with a minimum height of 5 mm to the baseline. Which holders or devices is this compatible with? The unit uses a 6 x 8 mm shank, making it compatible with standard holders on most height gauges and scribing devices for centring and bore‑distance measurement. Can this accessory be used to measure centre distances of bores? Yes. The design and geometry permit reliable centring for the measurement of bore centre distances, in addition to standard scribing tasks. What is the item number for ordering? The SKU/Article number is M219.101, known as the Universal scribe and centring point from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10 mm x 60° Carbide Centre Punch Tip Adjustable Height 0–60 mm - Metav IndustryLine
Combining a carbide cone tip, 60° geometry and an adjustable tip height, this replacement scribing and centring tip delivers repeatable centring and clearly defined scribe marks for production and inspection tasks. Order the replacement scribing and centring tip M219.102 directly via Metav Werkzeuge or consult the Metav team for application advice. Replacement scribing and centring tip M219.102 — Carbide cone Ø10 mm, 60° (Metav IndustryLine) The Replacement scribing and centring tip M219.102 is a carbide cone insert designed for precise centring and scribing on height gauges and marking devices in workshop and inspection settings. Carbide cone tip Ø10 mm, 60° Adjustable tip height 0–60 mm Compatible with standard height gauges Precision centring and scribing Repeatable centring thanks to carbide cone geometry The hard-metal carbide cone with a 60° angle and Ø10 mm diameter provides a defined contact geometry that reduces lateral slip and ensures consistent centring results. This geometry is particularly effective when transferring hole centres or marking bore patterns: the tip forms a precise point of contact, making subsequent drilling or reaming setups more reliable. The construction emphasises low wear for sustained accuracy over many cycles. Faster setup and controlled marking with adjustable height An adjustable tip height range of 0–60 mm (minimum height 5 mm to the baseline) allows the insert to be set to the required working position without additional spacers, reducing changeover time and the risk of misalignment. The adjustable range between the contact face and the scribing point enables fine tuning of the mark depth and position, which supports consistent visual marking and metrological repeatability in repetitive tasks. Broad compatibility for workshop and inspection tasks Designed for use on all common height gauges and scribing devices, this replacement tip is suitable for marking and for measuring bore distances in assembly and quality-control workflows. The light overall mass supports easy handling and secure clamping in gauge holders, while the carbide contact ensures long service life in regular marking operations. The accessory is therefore a practical choice where dependable centring and clear scribe marks are required across production runs. Select the Metav IndustryLine carbide cone tip for dependable centring and clear marks — contact Metav Werkzeuge in Emmerich for ordering or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M219.102 GTIN: 4054469164793 ECLASS: 21049238 TARIC: 90178090 Manufacturer: Metav IndustryLine Facts Tip diameter: Ø10 mm Cone angle: 60° Adjustable range: 0–60 mm Minimum height to baseline: 5 mm Weight: 0.1 kg Special features Material: Carbide (hard metal) cone tip Suitable for height gauges and scribing devices Application: Measuring bore distances and centring Adjustable step between contact face and scribe tip Compatible with common workshop and inspection fixtures FAQ Is this tip compatible with my height gauge? The replacement scribing and centring tip M219.102 is specified for compatibility with all common height gauges and scribing devices; fitment depends on the holder interface used on the gauge. Can the tip be used for marking bore centres directly? Yes — the carbide cone geometry of the M219.102 provides a precise contact point suitable for marking bore centres and transferring hole positions. What is the adjustable height range and why does it matter? The adjustable height is 0–60 mm with a minimum 5 mm to the baseline; this range allows quick setting of the scribe point relative to the contact face, reducing setup time and improving repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 mm Digital Height Gauge Simple With Aluminium Base, 0.01 mm Resolution - Metav IndustryLine
Take advantage of the combination of 0.01 mm digital resolution, a stable aluminium base and straightforward mm/inch functionality for consistent workshop set‑ups; order the device directly via Metav Werkzeuge or consult Metav’s advisors for tailored delivery and advice. Digital Height Gauge M219.044 — simple aluminium base, 0.01 mm resolution (Metav IndustryLine) The Digital Height Gauge M219.044 provides a compact and practical solution for routine height marking, saw‑blade and cutter depth adjustment in workshop and joinery environments. 0.01 mm digital resolution Aluminium base for stable positioning mm/inch display with zero function Designed for woodworking set‑up Accurate read‑out for reliable set‑up work The gauge combines a fine 0.01 mm display resolution with an operational accuracy figure of 0.1 mm, which together support repeatable adjustments during everyday tasks. The distinction between display resolution and overall accuracy is important: the fine read‑out allows precise alignment, while the quoted accuracy indicates the expected measurement tolerance under normal working conditions. This makes the instrument particularly suited to tasks that demand consistent, practical results rather than laboratory‑grade metrology. The clear digital read‑out reduces interpretation errors and speeds up adjustments on machines and hand tools. Straightforward digital controls that save time A compact digital module offers an on/off switch, mm/inch conversion and a zero function, enabling quick toggling between units and fast setting of reference points. The simple control set minimises operator learning time and supports efficient workflow on repetitive operations such as blade height setting or router depth checks. The instrument’s function set is focused on usability: essential features are provided without unnecessary complexity, helping maintain throughput in busy workshops and avoiding avoidable downtime. Stable base and workshop suitability Built with an aluminium base the device sits securely during measurements; the robust foot and a substantial mass (weight 3.2 kg) improve stability on uneven or dusty workbenches. The unit is offered in a simple version tailored for joinery work, where stable positioning and ease of handling are more valuable than advanced laboratory features. Typical applications include adjustment of saw blades, setting cutter depths, and use as a compact height scriber for layout and marking tasks. The compact size also makes storage and transport within the workshop straightforward. For dependable workshop marking and straightforward blade and cutter set‑up, choose the Metav IndustryLine digital height gauge and contact Metav Werkzeuge for supply and expert advice from Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M219.044 GTIN: 4054469112060 Category: Height gauge / height scriber Tariff code: 90173000 Facts Measuring range: 0–100 mm Resolution (display): 0.01 mm Accuracy: 0.1 mm Weight: 3.2 kg ECLASS: 21170334 Special features Aluminium base Digital display with on/off, mm/inch and zero Simple version for joinery Suitable for setting saw blades, cutter depths and marking Compact workshop instrument FAQ What measuring range does the unit cover? The device covers a measuring range of 0–100 mm, suitable for compact workshop tasks and joinery set‑ups. How fine is the read‑out and how accurate are measurements? The display resolution is 0.01 mm while the operational accuracy is specified as 0.1 mm, which supports reliable routine adjustments. Is the gauge suitable for woodworking and saw blade settings? Yes, the instrument is a simple joinery version designed specifically for workshop applications such as saw‑blade and cutter depth adjustment. What features does the digital display include? The digital module provides on/off control, mm/inch conversion and a zero function for quick reference setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Digital Height Gauge Stainless Steel 0.01mm Readout RB5 Data Output - Metav IndustryLine
Take advantage of the combination of a 1,000 mm measuring range, high 0.01 mm resolution and reliable RB 5 data output to streamline dimension control on large workpieces; order the device directly via Metav Werkzeuge or consult our specialists for integration advice. Digital height gauge M219.071 — 1,000 mm, RB 5 data output, stainless steel The Digital height gauge M219.071 is a precision measuring instrument for workshop and production environments, designed to measure heights and step dimensions on large components with industrial robustness and digital data transfer. 1,000 mm measuring range stainless design 0.01 mm resolution for fine detail RB 5 data output interface Carbide scriber for durable marking Precise long‑reach measurement for larger components The long 1,000 mm measuring span provides the reach needed for inspection of larger assemblies while retaining the rigidity required for reproducible results. Built from stainless steel, the instrument resists workshop wear and keeps guides true over time, reducing measurement drift. With an indicated accuracy of ±0.07 mm, the device suits quality control tasks in metalworking and fixture checks where both span and repeatability matter. The included carbide scriber enables direct layout marking without changing tools, saving handling time and improving workflow efficiency. Digital readout and data transfer that speed up inspection A digital display with multiple function buttons (ON/OFF, PRE-, TOL-, HOLD, DIR, 0/ABS and mm/inch) simplifies routine tasks, while the RB 5 data output allows straightforward capture of measured values into inspection software or data loggers. The 0.01 mm display step ensures clear, comparable readings for standardised quality procedures, and the combination of tactile controls and numerical clarity reduces interpretation errors. These features support faster inspection cycles and easier documentation, making calibration rounds and batch checks more efficient. Robust construction and practical ergonomics for the shop floor Designed for everyday industrial use, the instrument’s stainless steel construction and substantial mass (approx. 29 kg) contribute to stability during measurement, which is particularly beneficial when assessing tall or heavy workpieces. The device’s control layout and readable display make it accessible for workshop staff with varying experience levels, while durable components lower service intervals. The overall design focuses on reproducibility and low maintenance, helping to keep production moving with predictable measuring performance. Contact Metav Werkzeuge today to discuss integrating the M219.071 into production control or to request application advice from our specialists in Emmerich Technical data Article number: M219.071 GTIN: 4054469112169 Customs tariff number: 90173000 Core specifications Measuring range: 0–1000 mm Resolution (display): 0.01 mm (0.0005 inch) Accuracy: ±0.07 mm Weight: 29 kg Material: stainless steel Features & functions Data output: RB 5 Digital display with ON/OFF, PRE-, TOL-, HOLD, DIR, 0/ABS and mm/inch buttons Carbide scriber included Category: Height gauge / precision measuring instrument FAQ What measuring range does the gauge cover? The digital height gauge M219.071 covers a measuring range of 0–1000 mm, making it suitable for larger components and fixture inspection. Which data interface is supplied for documentation? Values can be exported via the RB 5 data output; the M219.071 supports straightforward capture into compatible inspection and logging systems. What resolution and accuracy can be expected? The unit displays measurements in 0.01 mm increments and is specified with an accuracy of approximately ±0.07 mm, appropriate for workshop quality control. Is a scriber included for marking? Yes, the instrument is supplied with a carbide scriber, allowing direct marking during measurement tasks. Which materials and environments is the instrument designed for? Constructed in stainless steel and built for shop-floor use, the M219.071 is intended for industrial environments where robustness and reproducibility are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Height Gauge With Carbide Scriber, Fine Adjustment, 12.5kg Clamping - Metav IndustryLine
Take advantage of a durable carbide scribing tip, a 1,000 mm measuring range and a precise fine‑adjustment spindle for consistent layout work on large components; order the height gauge directly via Metav Werkzeuge or ask the consultants for application advice. Height gauge M206.059 — 1,000 mm, carbide scribing needle and fine adjustment (Metav IndustryLine) The Height gauge M206.059 is a long‑range scribing and layout instrument for workshop and toolroom use, combining a robust carbide scribing needle with a fine‑adjustment spindle for repeatable height marking and guided measurements 1,000 mm measuring range for large components Carbide scribing needle for durable marking Fine-adjustment spindle for precise height settings Matt-chromed scale and vernier to DIN 862 Durable marking and long reach for heavy workpieces The gauge is built around a 1,000 mm measuring column that suits large assemblies and tooling fixtures, classified for large‑range layout tasks where reach and rigidity are decisive. The carbide scribing needle provides a hard‑wearing contact point for clear, long‑lasting marks on metal and other workshop materials, while the body of the instrument is made from special tool steel to withstand regular shop use. This combination reduces rework and speeds up marking operations on plates, housings or fixtures. Precise adjustment and repeatable scribing Equipped with a fine adjustment spindle and an analogue vernier, the instrument enables controlled micro‑movements for exact set‑ups. The vernier offers a reading step of 0.05 mm, supporting accurate transfers from layout to production, and the stated accuracy provides reliable repeatability for routine marking tasks. Conformity to DIN 862 confirms the measuring concept and helps integrate the tool into standard quality routines without lengthy validation. Clear scale, robust finish and practical handling The scale and vernier are matt‑chromed, reducing glare under workshop lighting and improving reading contrast. The analogue design favours a straightforward workflow that is easy to maintain: no batteries, predictable behaviour and stable readings even after prolonged use. A practical 12 x 28 clamping arrangement secures the scriber at the set height, helping to avoid slippage during transfer operations and to maintain consistent layout lines across repeated cycles. Workshop benefits: speed, durability and standards compliance For everyday industrial layout the instrument offers a balanced trade‑off between reach and stiffness: long enough for sizeable components yet designed for controlled handling on the shop floor. The carbide tip and matt‑chromed scales lower service frequency, while the analogue vernier and fine adjustment make delicate setting tasks both quicker and more reliable. The result is less downtime, fewer marking errors and a smoother production flow in fixture and mould work. For robust, long‑range marking choose the Metav IndustryLine height gauge and contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich. Technical Data Article number: M206.059 GTIN: 4054469102917 eClass: 21170334 Tariff number: 90173000 Brand: Metav IndustryLine Facts Measuring range: 0–1000 mm Resolution (vernier): 0.05 mm Stated accuracy: 0.12 mm Clamping: 12 x 28 Analogue instrument with vernier Special features Carbide scribing needle (hardmetal) Material: special tool steel Scale and vernier matt‑chromed Fine adjustment spindle Conforms to DIN 862 FAQ What materials can be marked with this instrument? The height gauge M206.059 is supplied with a carbide scribing needle suitable for marking common workshop materials, including steel and non‑ferrous metals, and is designed to withstand repeated use on robust surfaces. How precise is the reading on the vernier? The analogue vernier on this gauge provides a reading step of 0.05 mm and a stated accuracy of 0.12 mm, which supports reliable layout work and workshop quality control consistent with DIN 862. Is the instrument ready for immediate use on delivery? The instrument is supplied as a ready‑to‑use analogue height gauge; adjustments such as the fine‑adjustment spindle are present for immediate set‑up and operation. Can the gauge be used for very large assemblies? With a measuring range of 0–1000 mm, the gauge targets large‑range layout tasks and is suited for sizeable components, fixtures and platework where reach and rigidity are required. How does the finish affect everyday use? The matt‑chromed scale and vernier reduce reflections and improve legibility under workshop lighting, while the special tool steel construction increases durability for continuous use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Height Gauge With Reading Magnifier, Carbide Scriber, Adjustable Scale, Fine Adjustment, DIN 862 - Metav IndustryLine
A stable, large-range analogue height gauge that combines a carbide scribing tip, fine micrometric adjustment and a magnified reading aid for precise workshop layout and marking. Built to DIN 862, the instrument delivers reproducible results across the full 1,000 mm travel and is a robust choice for jig, fixture and machine-build tasks. Order the height gauge directly via Metav Werkzeuge or ask our consultants if needed. Height gauge M206.044.2 — 1,000 mm analogue height gauge with carbide scribing tip (Metav IndustryLine) Height gauge M206.044.2 is a heavy-duty analogue layout instrument designed for marking and measuring up to 1,000 mm, combining a magnifying reader and a micrometric fine feed for controlled, repeatable results Fine micrometric adjustment Carbide scribing tip for durability 1,000 mm large-range capacity Matt-chrome vernier and scale Stable, large-range measurements for repeatable results The design addresses measurement tasks where reach and stability matter: classified as a large-range height gauge (measuring range up to 1,000 mm), it has a solid mass that reduces vibration and deflection during marking. Conformity to DIN 862 ensures familiar mechanical tolerances for workshop metrology, while the verified accuracy ±0.12 mm gives a clear reference for process planning. This combination of range, standardised accuracy and mass reduces rework and helps maintain consistent assembly and inspection routines. Clear reading and controlled adjustment to reduce operator error A magnified reader is combined with a finely divided scale to simplify observation of the vernier, supporting precise layout even under standard workshop lighting. The instrument provides a readability 0.05 mm on the analogue vernier; the coarse position can be set quickly and then refined with the fine adjustment for marking or measurement tasks that demand a controlled contact force. Engineers and fitters benefit from fewer interpretation errors and faster setup times when repeating routine measurements. Durable construction for marking and machine-room use The measured parts are manufactured from special tool steel and the scale and vernier are matt-chromed to resist glare and wear, improving longevity in a busy production environment. A carbide scribing tip delivers a long service life when used for repeat scoring on metal surfaces, while the analogue mechanics avoid electronics that can be sensitive to coolant and workshop contamination. The result is a tool that stands up to everyday use and keeps maintenance straightforward. Practical applications and workflow advantages in production Ideal for toolroom layout, fixture setup, pattern making and large-part marking, the gauge supports repeatable processes where mechanical robustness trumps delicate electronics. The combination of long travel, clear magnified reading and micrometric control speeds up marking cycles and simplifies quality gates for large assemblies. Metav’s focus on dependable supply and technical know-how also supports integration into established measurement routines, reducing downtime and procurement complexity. For reliable, large-range layout work, contact Metav Werkzeuge to order the Metav IndustryLine height gauge or request tailored advice from our consultants. Technical Data Article number: M206.044.2 GTIN: 4054469102870 Category: Height gauges Facts Measuring range: 0–1000 mm Readability: 0.05 mm Accuracy: 0.12 mm Weight: 30.1 kg Tariff number: 90173000 Standard: DIN 862 Special features Carbide scribing tip Fine micrometric adjustment Reading magnifier Scale and vernier matt-chromed Special tool steel construction Analogue operation Scale easily adjustable FAQ What is the measuring range and suitability for large parts? The height gauge M206.044.2 offers a measuring range of 0–1,000 mm and is classified as a large-range instrument, making it suitable for marking and measuring larger components such as housings, plates and tooling fixtures. How precise is the instrument for workshop layout work? This analogue height gauge provides a readability of 0.05 mm and an indicated accuracy of ±0.12 mm in accordance with DIN 862, which is appropriate for robust workshop and fixture-setting tasks. Is the scribing tip suitable for repeated marking on steel? Yes, the gauge is fitted with a carbide scribing tip that is designed for durable marking on metal surfaces and reduces wear compared with standard steel points. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Dial Holder For Height Gauges 6x8mm Stem Mount - Metav IndustryLine
Take advantage of a compact, purpose-built mounting solution that combines a 100 mm length with a 6 × 8 mm shank interface to deliver stable, repeatable height‑gauge readings; order via Metav Werkzeuge or consult our advisors for application support. Dial indicator holder M402.013.2 — Height gauge mounting, 100 mm, 6 × 8 mm (Metav IndustryLine) The Dial indicator holder M402.013.2 is a dedicated mounting accessory for height gauges, designed to secure dial and lever‑type indicators for precise vertical measurement tasks in workshops and inspection areas. 100 mm compact length for confined spaces Fits 6 × 8 mm shank for standard height gauges Lightweight 0.1 kg for easy handling Stable mounting for consistent measurement results A rigid, purpose‑formed holder provides a secure interface between the gauge and the indicator, reducing play and movement during measurement. By fixing the instrument at a defined distance and orientation, the accessory improves repeatability and reduces variability caused by manual handling. The short 100 mm length is optimised for operations where space is limited but measurement reliability remains essential, making this holder especially useful on crowded benches or when working with compact assemblies. Designed for workshop compatibility and simple integration Compatibility with the common 6 × 8 mm shank format ensures straightforward integration with many height gauges and indicator stems found in industrial environments. The compact design allows fast attachment and repositioning on a height gauge column, supporting efficient inspection workflows. Because the holder is light and easy to manoeuvre, operators gain ergonomic benefits during routine checks without compromising measurement stability. Clear benefits for quality control and routine inspection Using a dedicated holder reduces setup time and the need for improvised fixtures, which in turn shortens the path from part to verified measurement. The accessory supports standardised mounting, so measurement procedures become more reproducible across shifts or different operators — a practical advantage for small series production, maintenance checks and calibration tasks. The result is a more consistent quality control loop and fewer ambiguous readings during critical inspections. Simple to specify and deploy in professional environments Specification is straightforward: the component offers a 100 mm working length and a 6 × 8 mm mounting interface, with a nominal mass of 0.1 kg that aids rapid handling. Its compatibility listing for common height‑gauge setups removes uncertainty during procurement and helps maintenance teams standardise their fixture inventory. Where instrument traceability and process stability matter, this holder is a compact, no‑frills solution that aligns with lean workshop needs. For precise height‑gauge mounting and practical integration into inspection routines, request the Metav IndustryLine dial indicator holder M402.013.2 from Metav Werkzeuge — technical advice and order support are available from Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M402.013.2 GTIN: 4054469143798 Category: Height gauge accessories (Höhenreißer) Customs tariff number: 90178090 Manufacturer: Metav IndustryLine Core specifications Length: 100 mm Mounting shank: 6 × 8 mm Mass: 0.1 kg Compatibility & features Suitable for mounting dial and lever‑type indicators on height gauges Compatible with height‑gauge references M219.055/056 Compact format for confined working areas FAQ Which indicators can be used with this holder? The Dial indicator holder M402.013.2 accepts standard dial and lever‑type indicators with stems compatible with a 6 × 8 mm mounting interface, enabling common workshop instruments to be mounted on height gauges. Is the holder suitable for confined workspaces and small components? Yes, the 100 mm length of the M402.013.2 provides a compact footprint that is well suited to confined benches and small assemblies while maintaining a secure mounting for reliable readings. How heavy is the mounting accessory and does it affect handling? The holder weighs 0.1 kg, which keeps handling simple and reduces operator fatigue during repetitive inspection tasks without compromising the stability required for repeatable measurements. Can the accessory be used with the listed height‑gauge models? The product is indicated as compatible with height‑gauge references M219.055/056 and is designed for straightforward integration with common height‑gauge columns that accept a 6 × 8 mm mount. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Dial Holder For Height Gauges 9x11mm Mount, For 8mm/4mm Indicators - Metav IndustryLine
Take advantage of the combination of secure mounting, extended reach and simple integration for reliable height measurements — order the dial gauge holder directly via Metav Werkzeuge or contact the consultants for compatibility advice. Dial gauge holder M402.013.1 — 9 x 11 mm shank, 100 mm length (Metav IndustryLine) The Dial gauge holder M402.013.1 provides a secure 9 x 11 mm mounting for dial and lever-type indicators, designed for use with height gauges and precision workshop measurement tasks. 9 x 11 mm shank for secure mounting 100 mm length for extended reach Compatible with Ø8 mm and Ø4 mm indicators Lightweight 0.1 kg for easy handling Secure mounting for repeatable indicator readings A rigid mounting interface is fundamental to trustworthy metrology. The holder features a 9 x 11 mm shank that locks an indicator in place, reducing play and lateral movement that would otherwise degrade measurement accuracy. By fixing the instrument solidly the mount improves repeatability of height checks and comparative measurements, which is especially valuable during batch inspection or set-up operations. The design avoids over-complication while delivering the mechanical stability expected in a professional metrology environment. Extended reach with low deflection for accessible measurements With a length of 100 mm, the mount offers additional reach where direct access is limited, enabling measurements on taller workpieces or recessed features without improvised extensions. The geometry balances reach and rigidity to keep deflection minimal; combined with the holder’s 0.1 kg mass this yields a stable assembly that is simple to manoeuvre yet resistant to vibration during reading. This practical combination facilitates faster set-ups and fewer re-measurements, supporting efficient workflows on the shop floor. Broad compatibility for height-gauge applications The component was developed for straightforward integration into common height-measuring setups and accepts indicators with stems of Ø8 mm and Ø4 mm, making it suitable for a wide range of dial and lever-type test instruments. It is listed as compatible with several workshop models and adapts readily to existing stands and gauges, allowing organisations to standardise on a single mount for diverse indicator types. The result is less tooling clutter and a cleaner calibration routine for routine quality control. Contact Metav Werkzeuge for tailored technical advice or to request delivery details for the Metav IndustryLine dial gauge holder M402.013.1 Technical data Article number: M402.013.1 GTIN: 4054469143781 Manufacturer: Metav IndustryLine Facts Length: 100 mm Weight: 0.1 kg Shank: 9 x 11 mm Tariff number: 90178090 Special features Compatible with Ø8 mm and Ø4 mm indicators Suitable for height gauge use Compatible with models M201.042, M206.043, M219.057/058/070/071 Category: Height gauges FAQ Which indicator stem diameters fit the holder? The holder accepts indicators with stems of Ø8 mm and Ø4 mm; the secure 9 x 11 mm shank interface ensures a stable connection for both sizes. Can this mount be used with standard height gauges? Yes — the mount is intended for height-gauge applications and is compatible with a range of workshop models including M201.042, M206.043 and the M219 series. How does the holder influence measurement stability? By providing a rigid connection and a short lever arm, the holder reduces lateral play and deflection, improving measurement repeatability and reducing the need for repeated set-ups. Is the mount easy to handle during routine inspection tasks? At approximately 0.1 kg the component is lightweight yet robust, which assists in quick positioning and minimal user fatigue during repetitive height checks. What identifiers should be referenced when ordering? Reference the article number M402.013.1 and the Metav IndustryLine product designation to ensure the correct dial gauge holder is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Dial Indicator Holder For Height Gauges 9x9mm Mount, For Ø8/Ø4mm Indicators - Metav IndustryLine
Take advantage of a secure 9 x 9 mm mounting interface and a compact 100 mm length to ensure repeatable height measurements with minimal setup time. Combine reliable compatibility with common height‑gauge models and practical handling thanks to the lightweight construction; order the Dial gauge holder directly via Metav Werkzeuge or consult our advisors for integration support. Dial gauge holder M402.013 – Holder for height gauges with 9×9 mm mounting, 100 mm length (Metav IndustryLine) Dial gauge holder M402.013 provides a stable mounting solution for dial indicators on height gauges, optimised for workshop metrology and repetitive height measurement tasks 9 x 9 mm mounting interface 100 mm overall length Lightweight at 0.1 kg for handling Designed for height gauge integration Stable mounting for repeatable height measurement A precise mounting interface reduces variation between successive readings. The 9 x 9 mm connection is a standardised interface that secures the indicator in a fixed orientation, which improves reproducibility when taking vertical measurements on a height gauge. By fixing the indicator close to the gauge column, the setup minimises elastic lever effects and contributes to consistent measurement results; this delivers a measurable gain in process reliability for inspection and setup operations. Compact form that speeds up workshop workflows The short, rigid 100 mm length provides the reach required for many common inspection tasks while keeping the centre of gravity close to the gauge column. At 0.1 kg, the holder is easy to manoeuvre and less likely to induce unwanted movement during clamping or adjustment. The compact design therefore reduces setup time and simplifies handling during routine checks, supporting faster part throughput without compromising the stability needed for accurate height measurement. Compatibility that simplifies integration with existing equipment The accessory is intended for integration with height‑measuring equipment and is listed as suitable for models M206.045–M206.047 and M219.066–M219.068, ensuring straightforward replacement or upgrade in many workshop fleets. The mounting interface and standard dimensions support quick exchange of dial indicators and allow existing column‑type fixtures to be used without modification, reducing disruption and enabling immediate productivity gains in quality control stations. Practical specification and traceable identification Beyond the mechanical fit, the holder carries clear identification for inventory and procurement. The compact specification supports neat bench organisation and simple logistics for spares provisioning. Clear markings and the supplied product identifiers assist in traceability and stock management, making it easier to maintain calibration cycles and to ensure that the correct holder is used for each measurement task. For reliable height‑measurement integration choose the Metav IndustryLine Dial gauge holder M402.013 and contact Metav Werkzeuge for tailored advice or ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M402.013 Manufacturer: Metav IndustryLine Category: Height gauges accessory Facts Length: 100 mm Weight: 0.1 kg Tariff number: 90178090 EClass: 21029090 Special features Mounting interface: 9 x 9 mm Suitable for: M206.045–M206.047, M219.066–M219.068 GTIN: 4054469143774 Category path: Messgeräte › Höhenreisser FAQ What mounting interface does this holder use? The Dial gauge holder M402.013 is fitted with a 9 x 9 mm mounting interface for secure attachment to compatible height gauges. Which height gauge models are compatible with this holder? Compatibility is documented for the holder with models M206.045–M206.047 and M219.066–M219.068, enabling straightforward integration into those inspection setups. Is the holder suitable for frequent handling and quick set‑ups? Yes; the holder’s compact 100 mm length and weight of 0.1 kg make the Dial gauge holder M402.013 easy to handle and quick to reposition during routine measurement cycles. Can this accessory improve measurement reproducibility? Fitting a stable, standardised mounting such as the 9 x 9 mm interface reduces play and orientation changes, which helps to improve reproducibility when used on a height gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x18.5 mm Scribing Needle For Height Gauge 10x12 Clamp, 100 mm Length - Metav IndustryLine
Take advantage of the combination of precise marking geometry, secure clamping and easy installation for consistent layout results; order the scribing needle directly via Metav Werkzeuge or ask our consultants if needed. Scribing needle M206.042.A1 – 100 x 18.5 mm, clamp 10 x 25 mm (Metav IndustryLine) The Scribing needle M206.042.A1 is a precision marking accessory designed for height scribers and layout fixtures, providing repeatable scribing for workshop and toolroom applications. Compatible with height scriber 206.042 Needle length 100 mm for repeatable marks Clamp interface 10 x 25 mm for secure fit Compact head 10 x 12 mm, weight 0.1 kg Precision and repeatability for layout work The M206.042.A1 scribing tip delivers precision marking through a defined needle length and compact head geometry. With a 100 mm needle profile and a head dimension of 10 x 12 mm, the accessory is engineered to produce consistent layout lines when mounted in a compatible height scriber. The fixed geometry reduces variability during repeated markings, which supports efficient set-ups on benches or marking stands and helps maintain production tolerances during batch work. The clearly defined dimensions permit straightforward integration into existing inspection and marking routines without lengthy adjustments. Secure mounting and robust interface A carefully specified clamp interface—10 x 25 mm—provides a stable mechanical connection to the host instrument, ensuring the needle remains aligned under normal workshop handling. The relatively low mass (approx. 0.1 kg) minimises inertia while keeping the tip rigid during marking strokes, improving line clarity on prepared surfaces. This combination of a stable clamp and moderate weight reduces the need for frequent realignments and shortens the time required for repeating identical marks across workpieces, which benefits throughput in small-series production or preparatory toolroom tasks. Practical use and workshop benefits Intended as an accessory for height scribers and scribing fixtures, this needle supports standard layout, transfer and reference marking tasks where a distinct, repeatable line is required. Installation is straightforward: the defined clamping dimension matches standard holder sizes used in workshop marking gear, which simplifies retrofitting the needle into existing setups. The product is particularly useful where precise, reproducible scribe lines aid subsequent machining, drilling or assembly operations. The compact form and clear specification make it simple for planners and operators to assess suitability for specific marking requirements without specialised conversion tables. Contact Metav Werkzeuge to discuss the M206.042.A1 scribing needle and arrange procurement or technical advice; reach our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M206.042.A1 GTIN: 4054469160610 Category: Height scriber accessory Data Length: 100 mm Head (B x H): 10 x 12 mm Needle L1 x H1: 100 x 18.5 mm Clamp: 10 x 25 mm Weight: 0.1 kg Customs tariff number: 90179000 Special features Compatibility: for 206.042 height scriber Label: Anreißnadel for 206.042, BxH 10 x 12 Includes technical drawing (see product images) Brand: Metav IndustryLine FAQ What instrument is this scribing needle compatible with? The scribing needle is designed for use with the 206.042 height scriber and compatible holders that accept a 10 x 25 mm clamp. How long is the needle and what head size does it have? The needle length is 100 mm and the head measures 10 x 12 mm, providing defined geometry for repeatable lines. Does the M206.042.A1 require a special holder for installation? No special holder is required provided the host device accepts the 10 x 25 mm clamp interface specified for the M206.042.A1. Is the scribing needle suitable for high-volume marking tasks? The design focuses on repeatability and stable mounting; it is suitable for repeated workshop markings where a consistent scribe line is needed. Are technical drawings available for integration checks? Yes, a technical drawing is provided with the product images to assist with integration and verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
104mm Scriber Needle 10x12mm Tip Clamp 10x24 - Metav IndustryLine
Take advantage of a compact scribing accessory that combines accurate marking geometry with a secure 10×24 clamping for reliable layout work; its compact head and 104 mm length support precise operation in confined setups. Order the accessory through Metav Werkzeuge for consistent workshop supply or consult Metav’s specialists for compatibility advice. Scribing needle for 219.070 – 10×12 mm tip, 104 mm length (Metav IndustryLine) The Scribing needle for 219.070 is a precision marking accessory for height gauges, engineered to deliver repeatable scribe lines on components where accurate layout is essential Compact 10×12 mm scribing tip 104 mm overall length for tight spaces 10×24 clamping thread for secure fit Delivering repeatable layout with compact precision The accessory’s small 10 × 12 mm tip and balanced 104 mm profile enable fine, reproducible marking where space is limited. Its geometry reduces lateral play during scribing, which leads to fewer alignment corrections and less rework in downstream processes. By integrating a compact marking tool into established height‑gauge setups, inspection and layout workflows become more efficient, with measurable gains in process reliability and part conformity. Secure mounting that supports fast workshop throughput A 10×24 clamping interface provides a firm mechanical connection to the matching height gauge, ensuring that the marking point remains stable under typical workshop handling. The robust connection reduces vibration and micro‑shifts during scribing operations, which improves line straightness and repeatability. This mechanical security helps maintain production rhythm and reduces time spent checking or repeating layout operations, supporting more predictable cycle times. Practical benefits for measurement and layout tasks Designed as an accessory for height‑gauge layout, the needle suits routine marking tasks in machine shops and toolrooms where clear, accurate scribe lines are required for machining or assembly references. The plain‑geometry tip is easy to dress or replace where necessary, keeping maintenance straightforward and downtime minimal. The compact form factor allows use in fixtures and narrow setups while preserving the precision expected from gauge accessories. Confirm compatibility and secure supply via Metav Werkzeuge in Emmerich: email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the scribing needle and its fit for the intended height gauge Technical data Article number: M219.070.A0 GTIN: 4054469160856 Tariff number: 90179000 Core technical data Length: 104 mm Head (W×H): 10 × 12 mm L1 × H1: 104 × 25 mm Weight: 0.1 kg Clamping: 10×24 Special features Accessory for height gauge 219.070 Category: Height scribing accessory Brand: Metav IndustryLine FAQ What height gauge is this scribing needle designed for? This scribing needle is specified as the accessory for the 219.070 height gauge and is made to match that instrument’s clamping geometry. How is the needle secured to the gauge? The needle uses a 10×24 clamping thread to achieve a secure fit to the compatible height gauge, which reduces lateral movement during marking. Is the needle suitable for marking in confined spaces? Yes, the compact 10 × 12 mm tip and 104 mm overall length make the accessory appropriate for scribing in narrow setups and fixtures. Can the scribing tip be replaced or maintained on site? The design permits simple replacement or dressing of the tip, allowing straightforward upkeep to retain sharp, clear scribe lines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Scratch Needle 10x15 Tip For Height Gauge Clamp 10x30 - Metav IndustryLine
Take advantage of the compact 10×15 mm tip geometry and the 110 mm overall length for precise layout marking on height gauges; the secure 10×30 mm clamping shank ensures repeatable positioning. Order the replacement scribe directly via Metav Werkzeuge or consult our specialists for compatibility advice. Scribing needle M219.071.A0 — Replacement scribe for height gauges, 110 mm reach (Metav IndustryLine) Scribing needle M219.071.A0 designed as a direct replacement scribe for height- and layout gauges, providing controlled marking for metalworking and toolmaking applications Replacement scribe for height gauges 110 mm overall length for extended reach 10×15 mm compact tip head Clamping shank 10×30 mm for secure fit Precise marking where measurements must be repeatable The scribe delivers a compact tip geometry that prioritises precision and visual control when transferring layout lines. The slender head with a 10×15 mm profile reduces obstruction at the measuring point, allowing close access to edges and small features. With an overall length of 110 mm, the tool reaches into tighter assemblies while maintaining a balanced handling weight of 0.1 kg, supporting stable manual marking and minimising undesired deflection during scribing. Secure fit and uncomplicated replacement to reduce downtime Designed for a straightforward mount on compatible devices, the component uses a 10×30 mm clamping shank to guarantee a repeatable seating and minimise lateral play. The mechanical interface ensures that once installed the scribe holds alignment for multiple operations, which supports accurate transfer of datum lines and reduces rework. This compatibility-focused design helps maintain workflow efficiency in workshop environments where fast tool changes are required. Practical choice for precision workshops and toolrooms The element serves as a practical spare or upgrade for height measuring and marking instruments used in machine shops, maintenance departments and toolmaking. Its compact dimensions and reliable clamping translate into consistent layout results on workpieces, making it suitable for both daily production tasks and fine adjustment work. As part of the Metav IndustryLine range, the accessory aligns with the brand’s emphasis on accessible, dependable measuring solutions for professionals. Contact Metav Werkzeuge for tailored advice or to obtain the replacement scribe compatible with device 219.071; specialist support is available via info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data Article number: M219.071.A0 GTIN: 4054469160863 Category: Height gauges / Scribing tools Customs tariff number: 90179000 Dimensions & weight Tip/head dimensions: 10×15 mm Overall length: 110 mm Clamping shank: 10×30 mm Weight: 0.1 kg Compatibility & features Intended as replacement scribe for device 219.071 Suitable for layout and marking on workshop components Compact form for access to small features Delivered as spare part (no on-site demonstration offered) FAQ What devices is this scribe compatible with? This scribing needle is supplied as the replacement scribe for device 219.071 and is compatible with height gauges and digital marking instruments that accept a 10×30 mm clamping shank. How does the clamping shank affect marking accuracy? A precise 10×30 mm clamping interface ensures stable seating and minimal lateral play, helping the scribe produce repeatable layout lines when the scribing needle M219.071.A0 is correctly mounted. Is the scribe suitable for marking small or recessed features? Yes, the compact 10×15 mm tip head and the 110 mm overall length provide access to edges and recessed areas while maintaining control for fine marking tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Scriber Pin for Height Marker Devices, 10x11mm Shank, Clamp 10x24 - Metav IndustryLine
Precise layout marking is delivered by the hardened tip and compact 110 mm length, combining repeatable scribing with easy replacement for height gauges 219.057 and 219.058. The secure clamping 10×24 mm fit ensures stable positioning in the gauge holder and reduces rework on workshop components. Order the scriber needle M219.057.A1 directly via Metav Werkzeuge or ask our consultants if needed. Scriber Needle M219.057.A1 — Replacement scribing pin for height gauges, 110 mm length (Metav IndustryLine) The Scriber Needle M219.057.A1 is a dedicated replacement scribing pin for height gauges 219.057 and 219.058, engineered for precise layout marking in metalworking and general workshop applications. 110 mm scribing length Compatible with 219.057 and 219.058 Clamping 10×24 mm Compact cross section 10×11 mm Accurate marking that reduces setup time and scrap The compact construction and defined working length deliver repeatable scribing across batches, which reduces setup time and scrap in production processes. The 110 mm effective length and the slim cross section keep the centre of gravity close to the gauge, improving rigidity and minimising chatter during marking operations. Compatibility with the designated height gauges provides a straightforward spare-part replacement that restores original performance without adjustment, supporting a steady production flow and predictable outcomes. Robust fit and clear mechanical interface for reliable use Clear mechanical dimensions (BxH 10 × 11 mm, effective L1xH1 110 × 41 mm) and the specified clamping 10×24 mm interface ensure a firm mechanical connection to the gauge holder. The small mass (approx. 0.1 kg) means quick handling and minimal influence on the instrument balance, which is valuable when frequent tool changes are required on a busy bench. The design focuses on functional reliability: a stable mount plus defined geometry allow precise transfer marks on components, simplifying downstream machining and inspection tasks. Practical spare-part logic and workshop integration As a dedicated accessory for height scribers, this scribing pin serves as a cost-effective maintenance item that keeps measuring equipment in service without long downtime. The simple, traceable specification (GTIN 4054469160832) supports stock management and procurement processes. Supplied as a single replacement part, the component fits directly into existing workflows and replenishment procedures, offering a pragmatic balance between availability and technical fit. Sourcing from Metav IndustryLine aligns the part with a European quality filter and the logistical reliability expected in industrial supply chains. For dependable workshop marking and swift parts replacement, choose the Metav IndustryLine scriber needle M219.057.A1 — contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M219.057.A1 GTIN: 4054469160832 Manufacturer: Metav IndustryLine Category: Height scriber (Höhenreisser) Facts Length: 110 mm Cross section (W × H): 10 × 11 mm Effective dimension L1 × H1: 110 × 41 mm Weight: 0.1 kg Tariff number: 90179000 Special features Compatible with height gauges 219.057 and 219.058 Clamping interface: 10×24 mm Designed as direct replacement spare part FAQ What height gauges does this scribing pin fit? The scribing pin is compatible with height gauges 219.057 and 219.058 and is specified as the replacement part M219.057.A1 from Metav IndustryLine. What are the key dimensions to check before ordering? Check the length of 110 mm and the clamping interface 10×24 mm; the cross section is 10 × 11 mm, which determines fit in the gauge holder. Is the part supplied as a complete assembly or single pin? This item is supplied as the replacement scribing pin M219.057.A1 for the height scriber; it is intended as a direct spare part to restore marking capability. How does the scribing pin affect marking accuracy? A defined working length and a secure clamping 10×24 mm interface improve repeatability and reduce variability in layout marks, which supports consistent downstream machining. Can this scribing pin be used for non-metal materials? The pin is designed for workshop marking tasks; material-specific performance depends on the substrate and marking method rather than the pin itself. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20-320mm Height Gauge With 3D Probe, Colour 3.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise 0.01 mm measurement, rapid digital data export and an included ISO 17025 calibration certificate to ensure reliable traceability and shorter inspection cycles; order the device directly via Metav Werkzeuge or consult our specialists for configuration and calibration advice. Microtech Metrology Height measuring and scribing device — 3D probe, 0.01 mm accuracy The Microtech Metrology Height measuring and scribing device is a compact digital height gauge designed for precision layout and production inspection in workshop, toolroom and small-series manufacturing environments. 0.01 mm measurement accuracy and traceable calibration Colour 3.5" touchscreen for intuitive operation Wireless and USB data output for efficient logging Integrated 3D probe for versatile scribing and probing Consistent, traceable measurement that reduces rework The gauge delivers 0.01 mm accuracy, a level suited to demanding workshop quality control where repeatable results shorten rework cycles and improve first-time-right rates. Supplied fully calibrated to ISO 17025, the instrument arrives with a formal calibration certificate that documents traceability and acceptance criteria for internal audits. The combination of laboratory-grade calibration and a stable digital readout ensures measurements can be relied upon in incoming inspection, first-off checks or assembly verification without lengthy additional validation. Fast data capture and seamless process integration Equipped with a Colour 3.5" touchscreen, intuitive menus speed up routine tasks and reduce operator errors when selecting measurement modes. Wireless and USB data outputs allow measured values to be exported directly into SPC systems or spreadsheets, cutting manual transcription and accelerating reporting. The digital interface supports straightforward integration into existing inspection workflows, enabling automated logging and consistent documentation of measurement results, which in turn supports faster decision-making in production. Versatile range and adaptable reach for medium-sized components With a nominal measuring range of 20–320 mm, this instrument sits in the medium-range class typically used for fixtures, mould halves and sub-assemblies; an optional extension increases the range up to 20–500 mm for larger parts. The device’s compact probe geometry and configurable tip allow both scribing and probing tasks to be performed without changing tools, saving setup time. This adaptability makes the unit practical for both bench-top inspection and intermittent on-machine layout tasks where space and flexibility matter. Practical features that support workshop productivity The built-in 3D probe enables reliable contact on inclined or stepped surfaces, while the solid digital mechanics provide a stable reference for comparative measurements. The system’s firmware supports zeroing, incremental measurement and simple averaging modes for repeat checks. Because the instrument is supplied with an ISO 17025 calibration certificate, quality managers can immediately incorporate it into their quality control procedures, reducing downtime and administrative overhead associated with external calibration arrangements. Contact Metav Werkzeuge today to discuss a tailored configuration, to request the ISO 17025 certificate copy or to arrange delivery from our European stock in Emmerich Technical data Article number: 144303281 GTIN: 4061905456800 Manufacturer: Microtech Metrology Key figures Measuring range: 20–320 mm Resolution / display reading: 0.01 mm Display size: 3.5 inches Data output: Wireless and USB Special features Colour 3.5" touchscreen Integrated 3D probe for scribing and probing Supplied calibrated to ISO 17025 with certificate Optional extension to 20–500 mm FAQ What is the declared accuracy of the height measuring device? The declared accuracy is 0.01 mm for the Microtech Metrology height measuring and scribing device (SKU 144303281), suitable for precise workshop inspection tasks. Is the instrument delivered calibrated and traceable? Yes, the device is supplied fully calibrated to ISO 17025 and includes the calibration certificate as part of the delivery. Which data outputs are available for process integration? Data can be exported via both Wireless and USB outputs, enabling direct logging from the Microtech Metrology height gauge into SPC systems or PC software. Can the measuring range be extended for larger parts? An optional extension increases the measuring range from the standard 20–320 mm up to 20–500 mm for larger components and assemblies. What makes the 3D probe useful in practice? The integrated 3D probe permits reliable contact on stepped or angled surfaces and allows scribing and probing without frequent tool changes, improving throughput in layout and inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200 mm Digital Height Gauge Simple Version Aluminium Base 0.01 mm Readout With On/Off Mm/Inch Zero Buttons - Metav IndustryLine
Reliable workshop setup is achieved with a 200 mm measuring range and a clear 0.01 mm resolution; the aluminium base provides stable contact for repeatable adjustments — order directly via Metav Werkzeuge or consult our specialists for application advice. Digital height gauge M219.045 — 200 mm, 0.01 mm resolution (Metav IndustryLine) The Digital height gauge M219.045 is a straightforward 200 mm measuring instrument designed for joinery and general workshop set-up, offering stable support and fast digital readings for routine height-setting tasks 0.01 mm resolution for fine adjustments Aluminium base for stable support Digital display with mm/inch selection Designed for joinery and workshop use Faster, repeatable setup for machine and tool adjustments The 0.01 mm display resolution shortens alignment time and raises confidence when setting blade heights or cutter depths. As a digital height instrument in the standard range (100–300 mm), it is optimised for everyday workshop workflows where a balance of reach and stiffness matters. The electronic readout removes parallax errors common with analogue instruments, enabling consistent positioning of saw blades, router cutters or milling fixtures. In practical terms, the instrument converts tiny mechanical adjustments into immediate numeric feedback, reducing trial cuts and scrap material. Stable foundation that improves measurement reliability A sturdy aluminium base and a mass of 1.5 kg give the gauge the stability required for reproducible contact with workpieces. The solid support minimises wobble during vertical travel and helps maintain alignment over repeated settings, which is particularly valuable when working on long runs of identical parts. Classified as a standard-length height gauge, it offers the workshop-friendly compromise between handling ease and useful measuring reach, so single-person operation remains practical while stiffness stays high. Clear readings and flexible unit handling for diverse tasks The digital display includes mm/inch toggle, an ON/OFF control and a Zero function, allowing immediate switching between metric and imperial units without manual conversion. This flexibility speeds up mixed‑unit projects and simplifies documentation of set values. The readable digits on the electronic readout reduce misinterpretation during busy set-up routines and the zeroing function supports relative measurements from a chosen datum; both features contribute directly to faster, error‑reduced production starts. Practical design tailored to joinery and workshop requirements Built as a simple execution for woodworking environments, the instrument excels where straightforward, robust operation is preferred over elaborate automation. Typical applications include the fine adjustment of saw blades, setting the depth of cutters and use as a height scriber for accurate transfer marks. The uncomplicated design keeps maintenance low and training short, so teams can integrate the gauge into daily processes quickly while benefitting from Metav IndustryLine’s emphasis on accessible precision. For reliable height-setting in joinery and general workshop use, choose the Metav IndustryLine digital height gauge and contact Metav Werkzeuge for customised advice and prompt supply from Emmerich Technical data Article number: M219.045 GTIN: 4054469112077 Customs tariff number: 90173000 eCl@ss: 21170334 Facts Measuring range: 0–200 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Accuracy: 0.1 mm Weight: 1.5 kg Special features Aluminium base Digital display with ON/OFF, mm/inch and Zero button Simple execution for joinery Suitable for saw blade and cutter depth setting Use as height scriber FAQ Is this instrument suitable for woodworking and joinery tasks? The Digital height gauge M219.045 from Metav IndustryLine is designed as a simple execution for joinery and is particularly suited to setting saw blades, router cutter depths and marking heights. What measurement range and resolution are provided? The instrument offers a measuring range of 0–200 mm with a resolution of 0.01 mm (0.0005 in) and an indicated accuracy of 0.1 mm. Can measurements be read in both millimetres and inches? Yes — the digital display on the M219.045 includes a mm/inch toggle plus a Zero function, enabling quick unit changes and relative measurements. Why does the aluminium base matter for workshop use? The aluminium base provides stable contact and helps prevent movement during height adjustments; its mass and rigidity contribute to repeatable settings across multiple parts. Which typical tasks does this height gauge support? Common uses include precise saw blade adjustment, setting cutter depths on woodworking machinery and functioning as a height scriber for transfer marks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Height Gauge With 0.01mm Resolution, Stainless Steel, Hardmetal Scriber, RB‑5 Output - Metav IndustryLine
Take advantage of a robust workshop instrument that combines precise 0.01 mm readability, reliable ±0.03 mm accuracy and a stainless design for long service life; order directly via Metav Werkzeuge or consult the Metav team for guidance on integration and application. Digital Height Gauge M219.055 – 200 mm, 0.01 mm resolution (Metav IndustryLine) The Digital Height Gauge M219.055 is a compact 200 mm measuring instrument designed for workshop measurement and quality control tasks where repeatable height and scribe marks are required. 0.01 mm digital resolution RB 5 data output for SPC integration Stainless steel construction Carbide scribing needle included Precision where it matters A modern digital height gauge delivers measurable gains in repeatability and throughput. This 200 mm instrument features a 0.01 mm display increment and a stated accuracy of ±0.03 mm, making it suitable for routine inspection and setup tasks in machine shops and production benches. The digital display with selectable mm/inch readout and zero/ABS functions reduces transcription errors; the clear numeric readout speeds decisions and shortens inspection cycles. As a result, measurement processes become more predictable and efficient, supporting a smoother production flow. Built for workshop use and data-ready Constructed from stainless steel and weighing 3.2 kg, the gauge balances stability with manageable handling on the bench. The integrated RB 5 data output enables direct connection to SPC systems or data loggers, simplifying documentation and trend analysis for process control. A carbide scribing needle is included, providing a durable scribe point for layout tasks and ensuring consistent marking without premature wear. Classified in the Standard range (0–200 mm), this instrument offers the practical reach and stiffness favoured for everyday metalworking and toolroom applications. Clear controls and practical functions The electronic functions—ON/OFF/PRESET, TOL, HOLD, DIR, 0/ABS and mm/inch—support common inspection routines: presetting reference heights, holding values for transfer, switching display direction and toggling between absolute and incremental modes. These controls reduce operator steps during repetitive checks and make the device suitable for both bench and production-line use. The combination of robust mechanics and versatile electronics provides an effective balance of tactile reliability and digital convenience, supporting traceable measurement results and straightforward integration into existing workflows. For quick procurement or technical advice on the Metav IndustryLine M219.055 digital height gauge, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 — expert assistance is available to ensure the instrument meets the application requirements. Technical data Article number: M219.055 GTIN: 4054469112084 ECLASS: 21170334 SKU: M219.055 Core specifications Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 3.2 kg Features & materials Material: stainless steel Data output: RB 5 Carbide scribing needle included Display functions: ON/OFF, PRESET, TOL, HOLD, DIR, 0/ABS, mm/inch Category: Height gauge (Standard range 0–200 mm) FAQ How accurate is the instrument in daily use? The stated accuracy of the height gauge is ±0.03 mm, and the instrument provides a display resolution of 0.01 mm to support consistent routine inspections. Can the measurement data be exported to statistical software? Yes. The gauge includes an RB 5 data output suitable for connection to SPC systems or data loggers for automated data collection. Is a scribing tip supplied with the gauge? A carbide scribing needle is supplied as standard, ensuring durable, repeatable layout marks during marking and inspection tasks. What makes this model suitable for workshop measurements? Its stainless steel construction, 200 mm measuring range and clear digital functions (mm/inch, 0/ABS, TOL) make it well suited to workshop and toolroom applications where robustness and integration are priorities. Which product designation should be quoted when ordering? Please quote the product as Digital Height Gauge M219.055 (Metav IndustryLine) when enquiring or ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Scriber Needle for Height Gauge With Magnifier, 10x16mm Shank - Metav IndustryLine
Benefit from precise marking, dependable clamping and a compact 10×16 mm profile that supports consistent workshop workflows; the needle’s 200 mm length combines reach with control for repeatable scribing. Order the scribing needle directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Scribing Needle for Magnifier Height Gauge M206.044.A3 — 200 mm length, 10×16 mm profile (Metav IndustryLine) The Scribing Needle for Magnifier Height Gauge M206.044.A3 is an accessory developed for precise marking tasks on height gauges with a magnifier, providing a controlled marking point for layout and inspection work in mechanical workshops. Compact 10×16 mm cross‑section for stability 200 mm length for extended reach and control Clamping interface 10×33 mm for secure mounting Designed for height gauge magnifier applications Precise, repeatable marking for production tasks The accessory delivers repeatable scribing thanks to its slim, stable profile and defined clamping dimensions. With a 200 mm shaft and a cross‑section of 10×16 mm, the tool balances reach and rigidity so that each mark remains consistent across multiple parts. This stability reduces rework and speeds up layout operations, a clear advantage in small‑batch production and quality inspection. The defined clamping interface (10×33 mm) ensures a secure fit to compatible magnifier height gauges, preventing rotation and maintaining alignment during transfers. Built for compatibility and workshop resilience Made as an application‑specific accessory, the needle interfaces with magnifier‑equipped height gauges used in machine shops and toolrooms. The design emphasises mechanical robustness while remaining compact for easy handling; its clamping 10×33 mm fitment secures the marker in the gauge slide without additional adapters. The lightweight construction (approx. 0.1 kg) keeps the gauge balanced and avoids undue wear on the slide mechanism. For customers seeking improved layout accuracy, this accessory complements standard marking workflows and integrates into existing inspection routines. Practical advantages and mindful procurement Choosing this accessory from the Metav IndustryLine offers a pragmatic mix of function and service. The scribing needle is supplied with clear identification (article number and GTIN) to simplify stock management and reordering. Its compact dimensions and simple mechanical interface reduce downtime during tool changes and help maintain a steady production rhythm. For purchasers who require specific compatibility checks, the Metav advisers can confirm fitment against the height gauge model, ensuring the accessory fulfils the intended marking application without guesswork. Contact Metav Werkzeuge today to confirm compatibility with your height gauge and to arrange supply of the Metav IndustryLine scribing needle from Emmerich. Technical Data Article number: M206.044.A3 GTIN: 4061905047633 Tariff number: 90179000 Facts Length: 200 mm Cross‑section B×H: 10×16 mm Clamping interface: 10×33 mm Weight: 0.1 kg Special features For magnifier height gauge applications Brand: Metav IndustryLine Category: Height scriber accessory FAQ What is the primary application of this scribing needle? The scribing needle is intended as a marking accessory for height gauges equipped with a magnifier, providing a fine, repeatable scribe for layout and inspection tasks. Will the needle fit my existing magnifier height gauge? Compatibility depends on the gauge’s clamping slot; the needle uses a 10×33 mm clamping interface—Metav Werkzeuge can confirm fitment against the specific gauge model. Is the scribing needle lightweight enough to avoid affecting gauge accuracy? Yes; with an approximate weight of 0.1 kg, the needle offers reach without significantly altering the balance or operation of standard height gauges. How is the product identified for reordering or inventory? Use the article number M206.044.A3 or the GTIN 4061905047633 for accurate reordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Digital Height Gauge With Fine-Adjust Wheel, ABS 0.01 mm Readout, Probe Socket - Metav IndustryLine
Combine the 0.01 mm readout, 300 mm measuring range and robust stainless steel construction for consistent workshop measurements; order the height gauge directly via Metav Werkzeuge or ask our consultants for application advice. Digital height gauge M219.096 – Absolute system, 0.01 mm readout, 300 mm range The Digital height gauge M219.096 is a 300 mm absolute height instrument with a 0.01 mm display increment, a connection socket for a digital dial gauge and a fine-adjustment handwheel for precise setting. 0.01 mm resolution for fine readings Absolute measuring system with 3 V power RB 6 output for dial gauge integration Carbide scribing tip and stainless steel frame Accurate results that match workshop expectations The instrument delivers a 0.01 mm display increment together with a stated accuracy of ±0.03 mm, which makes it suitable for standard metrology tasks in the machine shop. The 300 mm range places this tool in the Standard class of calipers and height gauges, offering the best balance between reach and rigidity for everyday engineering measurements. The absolute measuring system preserves reference data after power cycles, so repeat setups remain reliable without manual re-zeroing. For users unfamiliar with metrology terms: resolution is the smallest step the display shows, while accuracy is the measurement uncertainty; both matter for traceable results. Streamlined measurement and data handling for faster workflows Equipped with an RB 6 data output socket, the device accepts a compatible digital dial gauge for comparative measurement tasks or data logging; this enables simple integration into inspection routines. The digital readout features ON/OFF, mm/inch, HOLD, INC and ORIGIN keys, which simplify unit changes, incremental measurement and temporary value retention. There is no measurement speed limitation, so rapid displacement of the slide does not compromise operation — the combination of a readable display and a handwheel for precise feed ensures both speed and control when setting heights or transferring dimensions. Built for daily industrial use and repeatable service life The frame and slide are made from stainless steel, providing corrosion resistance and stabilising stiffness throughout the 300 mm travel. A carbide scribing tip ensures crisp layout lines and long wear life on metal surfaces. With a solid construction and an 8 kg mass that improves stability, the instrument resists vibration and handling variance, contributing to consistent measurement results shift after shift. The hand-operated fine adjuster gives tactile control for delicate setups and reduces operator-induced scatter during critical measurements. Practical applications and compatibility with workshop processes This gauge is well suited to setting tool heights, checking part heights, comparing components and transferring datum planes in general workshop and metalworking environments. The RB 6 interface makes it straightforward to use the instrument alongside existing digital indicators for comparative analysis or series inspection. For teams seeking support on integrating the gauge into quality workflows, Metav’s technical advisers can suggest compatible indicators and mounting options to match existing fixtures and measuring benches, helping to avoid unnecessary adapters or mismatched interfaces. For precise height control in standard machine‑shop applications, contact Metav Werkzeuge to request the Metav IndustryLine Digital height gauge M219.096 and discuss compatibility with existing dial gauges at our Emmerich facility Technical Data Article number: M219.096 GTIN: 4054469168753 eClass: 21170334 Tariff number: 90173000 Numbers / Core Technical Data Measuring range: 0–300 mm Resolution (display): 0.01 mm / 0.0005 in Accuracy: ±0.03 mm Weight: 8 kg Measuring system: Absolute (3 V) Readout functions: ON/OFF, mm/inch, HOLD, INC, ORIGIN Material & Special Features Material: stainless steel Carbide scribing tip Handwheel for fine adjustment Data output: RB 6 (socket for digital dial gauge) No measurement speed limitation Connection socket for digital dial gauge FAQ What level of accuracy can be expected from this gauge? The Digital height gauge M219.096 offers a display increment of 0.01 mm and a stated accuracy of ±0.03 mm, appropriate for standard workshop inspection and machine‑shop tasks. Can a digital dial gauge be connected for comparative measuring? Yes — the instrument provides an RB 6 data output socket for the connection of a compatible digital dial gauge to support comparative measurement workflows. Is the measuring range suitable for general metalworking tasks? With a 0–300 mm range the device is classified in the Standard category, covering the typical requirements of machine and metal construction for setup and inspection. What is the advantage of the absolute measuring system used here? The absolute system retains position reference after power cycles, so the gauge does not require re-zeroing every time it is switched on, improving efficiency and reducing setup time. Are the scribing and contact parts durable for daily use? Yes — the scribing tip is carbide and the construction is stainless steel, delivering high wear resistance and sustained repeatability in daily industrial use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Height Gauge 0.01mm Resolution With RB5 Data Output Stainless Steel - Metav IndustryLine
Combine 0.01 mm readout accuracy, RB 5 data output and stainless-steel construction for dependable workshop measurement and fast data transfer; ideal for quality checks and production control. Order the Digital Height Gauge M219.056 directly via Metav Werkzeuge or ask our consultants if needed. Digital Height Gauge M219.056 — 300 mm, 0.01 mm resolution, RB 5 data output (Metav IndustryLine) A Digital Height Gauge M219.056 designed for precise vertical measurements in machining, inspection and toolroom applications. 0.01 mm readout resolution RB 5 data output interface Stainless-steel construction Carbide scribing tip included mm/inch and hold functions on display Precision and traceability for shop-floor quality control The instrument delivers a 0.01 mm display resolution combined with an assessed accuracy of ±0.03 mm, which meets typical expectations for standard digital height gauges used in machine shops and inspection benches. The fine readout enables confident decisions in pass/fail checks while the RB 5 data output allows measurement values to be recorded directly into SPC systems or data loggers, reducing transcription errors and saving time in process documentation. This configuration supports repeatable results and faster traceability across production batches. Built to withstand daily workshop use Constructed from stainless steel, the unit resists corrosion and keeps mechanical reference surfaces stable under regular handling. The robust build, together with a carbide scribing tip, provides a durable marking option for workshop layout tasks and ensures longevity where contact with hard materials is required. The overall design balances rigidity and handling weight for reliable vertical positioning throughout repeated measuring cycles, so inspection routines remain consistent across shifts. Digital convenience that speeds measurement tasks The digital display features multiple functions — ON/OFF, PRE-set, TOL, HOLD, direction, zero/ABS and mm/inch switching — to adapt quickly to different operation modes and drawing conventions. Numeric stability on the screen and the RB 5 interface enable both immediate readings and seamless data export. For teams needing efficient documentation and reduced non-productive time, the electronic output and intuitive controls translate into measurable workflow gains and fewer administrative steps. Right-sized range for general metalworking and tooling With a 300 mm measuring range the gauge sits in the Standard category for calipers and height gauges, offering the best compromise of reach, stiffness and single-handed operability commonly required in machining and metal fabrication. This span is well suited to component set-up, fixture alignment and incoming inspection tasks. The unit’s specifications make it a practical choice where versatility and dependable accuracy are the primary selection criteria. For workshop-grade precision with digital traceability, contact Metav Werkzeuge for tailored advice on the Metav IndustryLine Digital Height Gauge M219.056 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M219.056 GTIN: 4054469112091 Manufacturer: Metav IndustryLine Core specifications Measuring range: 0–300 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Accuracy: ±0.03 mm Weight: 5 kg Tariff number: 90173000 Features / materials Material: stainless steel Data output: RB 5 Carbide scribing tip included Digital display with ON/OFF, PRE, TOL, HOLD, DIR, 0/ABS and mm/inch functions Digital device FAQ What is the measuring range and resolution of the gauge? The Digital Height Gauge M219.056 offers a measuring range of 0–300 mm with a display resolution of 0.01 mm and an inch resolution of 0.0005 in. Can the gauge export measurement data to a PC or SPC system? Yes, the instrument is fitted with an RB 5 data output that enables direct export of measurement values for statistical process control and documentation. Is the scriber suitable for marking hard materials? A carbide scribing tip is supplied with the height gauge, providing durable marking capability on harder surfaces encountered in tooling and fabrication. How accurate is the unit for routine inspection work? The unit provides an assessed accuracy of ±0.03 mm, which aligns with standard requirements for shop-floor inspection across most machining and metalworking tasks. Is the device corrosion-resistant for workshop environments? The measuring column and relevant components are made from stainless steel, ensuring improved resistance to workshop conditions and extended service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Height Gauge Double-Column Stainless Steel 0.01mm Resolution, Handwheel, Carbide Scriber - Metav IndustryLine
Take advantage of the proven combination of a double‑column stainless‑steel frame and a fine 0.01 mm resolution for reliable shop and inspection measurements; the robust scriber tip and handwheel deliver reproducible results with an accuracy of ±0.03 mm. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital height gauge M219.066 — double‑column stainless steel, 0.01 mm resolution A Digital height gauge M219.066 designed for precise vertical measurement in workshop, jigs and fixtures, and quality‑control applications Double‑column stainless‑steel frame Resolution 0.01 mm / 0.0005 in Accuracy ±0.03 mm Carbide scribing needle Fine‑adjustment handwheel Stable construction for repeatable, shop‑floor measurement The double‑column, stainless‑steel frame provides a stiff reference that reduces deflection during measurement cycles, which is critical when repeatability matters. With a measuring range of 0–300 mm the instrument sits in the standard class for general workshop and metalworking tasks, offering the best balance between reach and rigidity. The specified accuracy of ±0.03 mm together with a 0.01 mm display step ensures measurable improvements in process control and fewer downstream rejects in routine inspection work. Precise, user‑friendly measuring workflow A clear digital display allows immediate reading in mm/inch and supports zeroing and presetting for fast set‑ups. The integrated fine‑adjustment handwheel eases approach and avoids overshoot when positioning the scriber, while the carbide scribing needle maintains a sharp, long‑lasting mark for layout tasks. These features reduce handling errors and speed up repetitive measurements, so throughput and operator confidence both benefit from a single, compact instrument. Durable design that suits production and inspection environments Manufactured from durable materials and weighing approximately 5 kg, the instrument is built for stable placement and day‑to‑day use on benches or measuring tables. The robust construction minimises vibration and contributes to reproducible measurements even in busy workshop environments. Where traceability and consistent results are required, this device delivers a pragmatic mix of durability and digital convenience, making it suitable for routine quality control, toolroom duties and layout work. Contact Metav Werkzeuge for tailored application advice and to secure this Metav IndustryLine height gauge through our Emmerich service team Technical data SKU: M219.066 GTIN: 4054469112121 Article: Digital height gauge, 300 mm, double‑column stainless, reading 0.01 mm Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.03 mm Weight: 5 kg Tariff number: 90173000 Special features Double‑column stainless‑steel construction Digital display with ON/OFF, mm/inch, ZERO and PRESET Fine‑adjustment handwheel for careful approach Carbide scribing needle for durable marking Category: Height gauge (Höhenreisser) Material: stainless steel FAQ What accuracy can be expected from this height gauge? The stated accuracy for the M219.066 is ±0.03 mm, making the instrument suitable for standard workshop and inspection tasks where that tolerance is acceptable. Does the display allow inch readings? Yes — the digital display supports both mm and inch modes, with a resolution of 0.01 mm or 0.0005 in for fine readings. Is the scriber replaceable and suitable for marking? The device is fitted with a carbide scribing needle, chosen for longevity and reliable marking; the needle can be replaced if required during maintenance. For which applications is this gauge most appropriate? With a 0–300 mm range and robust double‑column frame, the gauge is ideal for general machining, jig‑making and routine quality checks in workshops. How does the handwheel improve measurement quality? The fine‑adjustment handwheel permits controlled approach to the workpiece, reducing accidental overshoot and contributing to more consistent, reproducible measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Height Gauge With Fine Adjustment Wheel, Stainless Steel, 0.01mm Resolution - Metav IndustryLine
Take advantage of precise 0.01 mm resolution, a corrosion‑resistant stainless steel construction and a fine‑control handwheel for repeatable set‑ups; order directly via Metav Werkzeuge or consult the Emmerich team for application advice. Digital height gauge M219.057 — 300 mm, 0.01 mm resolution, stainless (Metav IndustryLine) Digital height gauge M219.057 for workshop measurement and inspection tasks, delivering controlled vertical positioning and repeatable height readings within a standard 0–300 mm range. 0.01 mm digital resolution Robust stainless steel frame Handwheel for precise fine adjustment Precision where it counts This height measurement instrument delivers a displayed 0.01 mm resolution with an indicated accuracy of ±0.03 mm, making it a dependable choice for routine workshop inspection and machine‑shop tasks. The unit’s 300 mm measuring range places it in the standard class for general metalworking and tooling measurement, providing the best compromise between reach and rigidity. The combination of fine readout and verified repeatability supports clear decision‑making in incoming inspection, set‑up verification and small‑batch quality checks. Built for daily use and long service life Constructed from stainless steel, the gauge resists corrosion and keeps guideways running true over extended use, while its mass (approx. 8 kg) adds stability during measurement to reduce vibration‑related errors. The fixed marking element is a tungsten carbide scribing tip, selected for wear resistance and consistent contact geometry; this means fewer adjustments and longer intervals between service tasks. Together, these design choices reduce downtime and support reliable output over many production cycles. Fine adjustment and digital integration for efficient workflows A dedicated handwheel allows micro‑positioning of the stylus for controlled approach and exact setting, which speeds up repetitive tasks and minimises overshoot. The digital display offers ON/OFF, mm/inch, ZERO and PRESET keys for straightforward operation, and the unit is fitted with an RB 5 data output to feed measurements into external systems or data loggers for traceable records. These features cut manual re‑entry, improve traceability and tie the gauge into shop‑floor data flows without sacrificing simple local operation. Practical benefits for workshop quality control Classified for everyday machine and metalwork use, this instrument supports a wide range of applications from tool and fixture set‑up to part verification and serial inspection. The combination of a clear digital readout, robust materials and a controlled approach mechanism reduces operator influence on results and shortens measurement cycles. For teams consolidating measurement equipment, this gauge contributes to a consistent inspection standard across benches and small production lines. Speak to Metav Werkzeuge for specification advice or to reserve the M219.057 digital height gauge from our Emmerich stock — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M219.057 GTIN: 4054469112107 Category: Height gauges Manufacturer: Metav IndustryLine Tariff code: 90173000 Facts Measuring range: 0–300 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Weight: 8 kg Special features Material: stainless steel Handwheel for fine adjustment Tungsten carbide scribing tip Digital display with ON/OFF, mm/inch, ZERO, PRESET Data output: RB 5 Clamping: 10x24 FAQ What measurement range does the gauge cover? The M219.057 covers a 0–300 mm measuring range, placing it in the standard class for workshop and metalworking tasks. How precise is the readout and how reliable are the results? The instrument provides a 0.01 mm display resolution with an indicated accuracy of ±0.03 mm, suitable for routine inspection and machine‑shop verification. Is the scriber suitable for heavy use? Yes, the gauge is equipped with a tungsten carbide scribing tip, chosen for wear resistance and consistent contact geometry under repeated use. Can the measurements be exported for documentation? Measurements can be sent via the RB 5 data interface, enabling direct logging into data collection systems or quality records. Which environments and applications is this height gauge intended for? Designed for workshop inspection, tooling set‑up and small production quality checks, the unit is a practical choice for machine shops, toolrooms and inspection benches. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Height Gauge With Rotary Fine-Adjust, 0.01mm Readout, Carbide Scriber And Dial Indicator Arm - Metav IndustryLine
Take advantage of the precise 0.01 mm reading and robust stainless steel construction for repeatable height measurements in the workshop; the integrated RB 5 data output and dial‑gauge mount speed up inspection routines and traceability — order directly via Metav Werkzeuge or contact our consultants for technical advice. M219.059 Digital height gauge — 300 mm range, 0.01 mm resolution (Metav IndustryLine) The M219.059 Digital height gauge is a 300 mm electronic height gauge for workshop inspection and layout tasks, featuring a handwheel and a dial‑gauge mount for measuring on granite plates or test stands. 300 mm measuring range, 0.01 mm resolution Carbide scribing needle and measuring arm Handwheel for fine, controlled positioning RB 5 data output for external recording Precision that suits everyday shop inspection The instrument delivers a 0.01 mm display resolution combined with a measured accuracy of approximately 0.03 mm across the full 300 mm range, which places it squarely in the standard category for workshop metrology. This balance of reach and stiffness makes the device well suited to routine dimensional checks, fixture set‑up and first‑article inspection. The fine readout and consistent accuracy translate into fewer reworks and more reliable process control, helping maintain steady throughput on the shop floor. Built for steady handling and repeatable contact A robust stainless steel column and an 80 × 80 mm measuring table give the height gauge the rigidity required for stable measurements. The fitted handwheel allows deliberate, low‑force advancement of the scriber, reducing operator variation, while the carbide scribing needle provides a defined contact point for marking or layout. The included measuring arm and dedicated dial‑gauge mounting point enable use with a dial indicator for comparative checks or when higher tactile feedback is required; together these features support reproducible results with minimal setup time. Digital workflow and inspection efficiency The clearly arranged digital display includes on/off, mm/inch, zero and preset keys for fast configuration. The built‑in RB 5 data output permits direct connection to recording devices or data loggers, simplifying documentation and quality records. Integrating this height gauge into an inspection routine reduces manual transcription errors and accelerates batch sign‑off — a rational improvement that directly benefits quality assurance and traceability. For a practical measurement solution that integrates with workshop inspection workflows, contact Metav Werkzeuge to discuss the M219.059 and available accessories or request technical assistance by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M219.059 GTIN: 4054469163079 eClass: 21170334 Customs tariff number: 90173000 Numbers / Core technical data Measuring range: 0–300 mm Resolution (display): 0.01 mm Specified accuracy: 0.03 mm Weight: 8 kg Measuring table: 80 × 80 mm Special features / Versions Material: stainless steel Carbide scribing needle (HM) Handwheel for fine adjustment Measuring arm with dial‑gauge mount for granite plate use Digital display with on/off, mm/inch, zero and preset keys Data output: RB 5 Clamp thread: 10×24 FAQ What measurement range does this height gauge cover? The M219.059 height gauge covers a measuring range of 0–300 mm, offering a standard workshop reach for fixtures, components and general inspection tasks. How fine is the display and what accuracy can be expected? The digital readout shows 0.01 mm increments; the stated accuracy for the full 300 mm range is approximately 0.03 mm, suitable for routine quality control. Can measurement results be exported electronically? Yes, the unit provides an RB 5 data output for connection to external recorders or data capture systems to support traceability. Is the scriber durable for repeated layout work? The gauge is supplied with a carbide scribing needle, which provides durable, precise contact for marking and layout operations. Does the gauge accept a dial indicator for comparative checks? Yes, the M219.059 includes a measuring arm and a dedicated mount for a dial gauge, enabling comparative measurement or higher‑sensitivity checks on a granite plate or bench. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Höhenmess- und Anreißgerät mit Tablet, 0,001mm - Microtech Metrology
Nach ISO9001:2015 stellt Microtech Metrology in der Ukraine alle Messinstrumente her. HIGHLIGHTS für den Höhenmess- und Anreißgerät mit Tablet Messbereich: bis 300mm Ablesung: 0,001mm Ausführung: digital Datenausgang: Wireless+USB Sie sind unsicher, ob das Werkzeug für Ihre Anwendung geeignet ist? Oder benötigen Sie weitere technische Informationen? Kein Problem – sprechen Sie uns gerne an! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Telefon: +49 2822 7131930 Produktdetails für die digitale Höhenmess- und Anreißgerät von Microtech Metrology: Marke: Microtech Metrology Bezeichnung: Höhenmess- und Anreißgerät Bestellnummer: 144303263 Zahlen / Fakten: Messbereich: 0 bis 300mm Ablesung: 0,001mm Datenausgang: Wireless+USB Genauigkeit: 0,015mm mit ISO 17025 Kalibrierzertifikat Messkraft: 1-20N Besonderheiten Ausführung: digital Anzeige: Color 2.4" Touchscreen mit Tablet Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com
300mm Double-Column Height Gauge With Fine Adjustment, Carbide Scriber, Dial Indicator 0.01mm - Metav IndustryLine
Take advantage of the combination of a rigid double-column construction, precise dial indicator reading and a smooth fine-adjustment feed to speed up layout work and reduce rework; order directly via Metav Werkzeuge or consult the Metav team for specification advice. M206.045.T double-column height gauge (300 mm) by Metav IndustryLine — dial reading 0.01 mm, stainless steel The M206.045.T double-column height gauge provides workshop-grade height and scribing measurements for toolrooms and production benches, combining stable column guidance with a fine-adjustment feed and a round carbide scriber. Dial indicator with 0.01 mm reading Fine-adjustment feed for controlled scribing Robust stainless steel construction Carbide round scriber for lasting edges High-precision layout and repeatable results The gauge is built around a double-column construction that greatly reduces lateral play and torsion during measurement and scribing operations. Fitted with a mechanical dial that gives a 0.01 mm reading, the instrument supports repeatable height transfer and step marking with an overall stated accuracy ±0.03 mm, making it suitable for routine workshop tolerance checks and layout tasks. The inclusion of a dedicated handwheel and fine adjustment enables slow, controlled feed when marking fragile or pre-finished components, which reduces the likelihood of costly surface damage or repositioning errors. Workshop durability and ergonomic handling Made from stainless steel, the device withstands typical shop environments while keeping sliding surfaces stable. The carbide scriber with a round tip maintains its geometry over longer use cycles, so marking performance remains consistent and service intervals are extended. Weighing 7.2 kg, the assembly combines mass for stability with a compact footprint for bench or surface-plate use. The integrated double counter and dial arrangement record upward and downward movement separately, supporting clear documentation of repeated operations and easing handover between operators. Practical integration into inspection and production workflows Designed for routine layout and measurement up to 300 mm, this analogue instrument fits standard inspection processes where mechanical readouts are preferred for immediate visual control. The mechanical dial and separate counters simplify reporting during repetitive marking or step-setting tasks and avoid dependence on digital interfaces where traceability is recorded manually. The robust clamping and feed components ensure the gauge holds settings reliably during transfer operations, supporting consistent results across batches and aiding process stability in small to medium production runs. For precise layout and lasting reliability choose the Metav IndustryLine M206.045.T — contact Metav Werkzeuge in Emmerich for tailored technical advice and delivery options. Technical data Article number: M206.045.T GTIN: 4054469151625 Customs tariff: 90173000 Manufacturer: Metav IndustryLine Key measurements Measuring range: 0–300 mm Accuracy: ±0.03 mm Dial reading: 0.01 mm Weight: 7.2 kg Special features Double-column construction Fine-adjustment feed Handwheel operation Carbide (hardmetal) round scriber Mechanical dial indicator with separate up/down counter Clamping: 9x21 Analogue instrument Intended for workshop layout and height measurement FAQ What is the stated accuracy of the M206.045.T double-column height gauge? The M206.045.T double-column height gauge from Metav IndustryLine is specified with an accuracy of ±0.03 mm and a dial resolution of 0.01 mm. Can the carbide scriber be replaced or reconditioned? Yes, the round carbide scriber on the Metav IndustryLine gauge is a replaceable tooling item and can be reconditioned or swapped for serviceable tips to maintain marking quality. Is the gauge suitable for use on a surface plate or in a production bench environment? The robust double-column design and 7.2 kg mass make the gauge well suited to bench and surface-plate use for layout and repeatable marking tasks in production or toolroom settings. Does the instrument provide measurements for both upward and downward movement? The mechanical arrangement includes a double counter that records movements separately for upward and downward travel, simplifying repeatable setting and documentation. Which materials is this height gauge intended for marking and layout? The gauge is intended for standard workshop materials where mechanical scribing is suitable; the carbide tip is durable for regular use on workshop metals and components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Work with pinpoint accuracy using a robust height gauge
A height gauge (also available as a height scribe or surface gauge) provides millimetre-precise layout and height measurement for metalworking and precision hobby tasks. Designed with a heavy stand for a stable base, these scribing instruments make it straightforward to mark straight, repeatable lines and to check parallel heights on components.
Why a height gauge is essential in the workshop
Height gauges serve as both measuring and marking tools: the fixed stand and adjustable scriber translate fine dial or digital readings into an accurate layout on metal surfaces. The scribing pin, typically offered in carbide, steel or brass, allows either durable marking or gentle, non-damaging scribing where only a faint line is required. Units are available as digital, analogue or with a dial indicator, and they cover measurement ranges up to 1000 mm. Digital models permit quick zeroing and easy switching between millimetres and inches, while analogue versions offer uninterrupted operation without batteries.
Clear performance gains for production and workshop use
- Stable, repeatable setups thanks to the heavy base and optional magnetic base for ferrous workpieces.
- Reduced marking and rework time through a precise carbide scribing pin and fine adjustment.
- Flexible measurement range up to 1000 mm, covering bench and tall-part applications.
- Lower measurement errors with digital display functions: zeroing and unit conversion.
- Reliable analogue alternatives when battery-free operation is required.
Metav: practical precision for every workshop
Metav combines decades of measurement expertise with a comprehensive range that makes high-precision tools accessible to industry and craft alike. From Emmerich, Metav acts as a quality filter for the European market, supporting consistent supply and trusted delivery. Choosing Metav’s selection of height gauges means centralised access to tested instruments and technical variety, from analogue surface gauges to feature-rich digital height scribing systems.
In short, a height gauge (height scribe / surface gauge) is the straightforward solution for accurate marking and height measurement that improves workflow and reduces errors.
FAQ
What measurement range do height gauges cover?
Height gauges commonly cover ranges up to 1000 mm, making them suitable for both small bench work and larger components; Metav stocks models across this range to suit workshop needs.
Which scribing pin material should I choose?
Choose a carbide scribing pin for durability on hard metals, steel for general use, or brass when a non-damaging, light mark is required; the height gauge can be supplied with the appropriate pin for the application.
What advantages do digital height gauges offer over analogue?
A digital height gauge offers fast zeroing, reduced reading errors and simple switching between millimetres and inches, which speeds setup and increases measurement reliability.
Is a magnetic base necessary?
A magnetic base adds stability when working with ferrous parts, reducing vibration and the need for re-clamping; choose magnetic or non-magnetic bases depending on your material mix.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com