HSS Twist Drill Bit DIN 338, Type N, short, roll-forged, black 118°

Twist Drill — Type N short HSS, 6.9 mm, 118° (black, DIN 338) by MetavCUT The Twist Drill Type N is a short High Speed Steel drill designed for precision metalworking with Hand Drills, offering stable performance and DIN 338 conformity. Short HSS design for stable drilling 6.9 mm Diameter for precise holemaking 118° Tip angle for reliable centring on metals Type N normal spiral optimised for steel Suitable for use with Hand Drills Durable High Speed Steel for demanding metalwork Built from HSS (High Speed Steel), this short Twist Drill provides a combination of elasticity and wear resistance ideal for standard metal drilling tasks. Because the bit is manufactured in accordance with DIN 338, customers benefit from a defined product geometry and proven production standards that support repeatable results. The material choice reduces the risk of breakage for smaller diameters and gives a dependable service life when used within its recommended applications. Geometry that improves precision and stability With a 6.9 mm Diameter, a Spiral Length of 63 mm and an Overall Length of 109 mm, this short configuration minimises overhang and vibration for more accurate holes. The 118° Tip Angle assists with centring on slightly curved or softer surfaces and reduces initial walking. Short length and compact geometry lead to higher stiffness, which translates into cleaner holes and less tool deflection during use. Designed for metalworking with Hand Drills and machines This Type N normal spiral is specifically intended for metal applications, making it well suited to Drilling Machines and Hand Drills when requiring precise, repeatable metal holes. The bit’s black finish and short execution aid handling and chuck grip, while the profile is optimised for common industrial and workshop tasks such as drilling alloyed and unalloyed steel, cast iron, non-ferrous metals and some plastics. Who benefits and how to maintain performance Professionals and hobbyists who need a robust, general-purpose metal drill will value the stability and serviceability of this short HSS Twist Drill. For longevity, periodic re-sharpening restores the cutting geometry; the Type N profile is straightforward to regrind, keeping the drill centred and efficient. When in doubt about compatibility with specific materials or machines, MetavCUT and METAV Werkzeuge provide expert advice to ensure the right choice for the task. Choose the MetavCUT short HSS Type N Twist Drill for dependable metal drilling — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Designation: Twist Drill Brand: MetavCUT SKU: 40069-FDA Diameter: 6.9 mm Spiral Length: 63 mm Overall Length: 109 mm Tip Angle: 118° Type: Type N Execution: short Colour: black Material: HSS Standard: DIN 338 For Drill: Drilling Machine / Hand Drill Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N from MetavCUT used for? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is designed for machining tasks in alloyed and unalloyed steel, cast iron and similar materials where a stable short HSS tool is required. Which three drill types exist? There are three common drill categories: Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for such applications. What is a Twist Drill mainly used for? The Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters; its form allows easy regrinding and sustained performance under heavy loads. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross cutting edge at the tip, which lowers friction and the required feed forces while improving centring of the drill in the workpiece.

Twist Drill — Type N, Ø 6 mm, 118° tip, Short, Black, HSS, DIN 338, for Drilling Machine (MetavCUT) The Twist Drill Type N short HSS bit for Drilling Machine is designed for precision metalworking and stable, repeatable holemaking. Short HSS design for increased stability 6 mm diameter for common metal holes 118° tip for precise centring Compliant with DIN 338 standard Black finish for improved corrosion resistance Greater stability for more accurate metal holes Kurz design and a reduced overhang provide noticeably better stability during machining. The short overall length reduces chatter and bending, which produces cleaner holes and extends tool life. This configuration is particularly advantageous when working on lathes or hand drilling machines where rigidity is essential. The result is higher repeatability and fewer rejects in series production. HSS material engineered for demanding work Made from HSS (High Speed Steel), the bit tolerates higher cutting speeds and maintains hardness at elevated temperatures. For standard metal-drilling tasks this material offers a good balance between toughness and wear resistance. Because HSS is roll-formed in many cases, the risk of breakage on small-diameter holes is reduced, making the bit suitable for steels, cast iron, non-ferrous metals and many plastics. Designed tip geometry for reliable centring The 118° point angle supports quick penetration and reliable centring on typical metal surfaces. A smaller point angle aids initial positioning on slightly curved workpieces, while still providing efficient chip removal during cutting. For users seeking predictable starts and consistent bore quality, this geometry reduces walking and improves surface finish from the first cut. Applications and target users This short Type N bit is optimised for metalworkers, toolrooms and maintenance workshops that require precise drilling in steel and iron. It is well suited for both stationary machines and hand-operated drilling units where rigidity and accuracy matter. The product addresses professionals and advanced hobbyists who prioritise tool life and hole quality over extreme penetration speed. Practical advice for handling and re-sharpening For best results clamp workpieces securely and use appropriate cutting fluid for metal drilling. The short flute length simplifies re-sharpening on conventional grinding wheels; when resharpening, maintain the original 118° angle to preserve centring behaviour. Regular inspection for wear and prompt resharpening ensure consistent performance and safer operation. We recommend choosing the MetavCUT short HSS Type N Twist Drill for precise metalworking — for individual advice or further technical data contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel. +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40060-FDA Durchmesser: 6 mm Spitzenwinkel: 118° Spiral length: 57 mm Gesamtlänge: 93 mm Ausführung: Short Farbe: Black Typ: Type N Norm: DIN 338 Material: HSS Anwendung: Drills for metal For Drilling Machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill suitable for? The Twist Drill from MetavCUT (Type N, HSS) is intended primarily for metals such as steel, cast iron and non-ferrous alloys; it also performs on many engineering plastics while offering good wear resistance and cutting stability. Can the MetavCUT Twist Drill be re-sharpened? Yes, the MetavCUT short HSS bit can be re-sharpened on conventional grinding wheels; preserving the original 118° point angle during re-sharpening maintains centring behaviour and prolongs service life. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high-strength materials and larger bore diameters; its form is easy to grind and endures higher loads, making it suitable for drilling in metals and demanding applications. Which 3 drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills.

Twist Drill Type N — 7.1 mm, 118°, Short, Black, HSS, DIN 338 The Twist Drill Type N is a short HSS metalworking drill designed for use in Drilling Machines, offering stable, accurate holes with a 7.1 mm diameter and a 118° tip angle. Short HSS Type N for precise metal drilling 7.1 mm diameter for standard hole sizes 118° Tip for improved centring in softer metals Conforms to DIN 338 for short spiral drills Black finish for reduced glare and long service Precision and stability for demanding metalwork Designed for accurate, repeatable performance, the Twist Drill delivers consistent results when machining metals. Its short geometry reduces overhang and bending, which improves concentricity and hole tolerance when compared with longer tools. For the user this means fewer rejects, faster set-up and reduced runout on portable and stationary Drilling Machines. The compact form also increases rigidity, making the bit particularly valuable for precise tasks on alloyed and unalloyed steels. Material and design choices that reduce breakage risk Manufactured from HSS (High Speed Steel), this short Type N bit combines toughness and heat resistance suitable for a broad range of metal applications. The roll-rolled or ground production options referenced in the DIN 338 standard ensure uniform flute geometry and reliable cutting behaviour. For operators unfamiliar with HSS: it is a wear-resistant steel grade that stays sharp at elevated temperatures and is therefore recommended for typical metal drilling tasks under moderate cutting speeds. Where this drill performs best and who benefits Workshops and maintenance teams that require robust, general-purpose metal drills will find the Type N short HSS variant especially useful. The 7.1 mm diameter is well suited for through-holes and precision fits in components, while the compact length improves handling on handheld Drilling Machines as well as in jigs on bench machines. Professionals who prioritise stability and easy reconditioning after wear will appreciate the straightforward resharpening properties of this design. Tip geometry and the practical effect on drilling A 118° tip angle offers better centring and reduced walking on curved or softer surfaces, making initial penetration simpler for less experienced operators. In practice, the tip geometry lowers the axial force required and improves hole quality in materials such as aluminium and mild steel. The designation Type N indicates the classic normal spiral flute geometry, optimised for metal cutting rather than soft woods. Correct feed and cutting speed selection will extend service life and reduce burr formation. Choose the MetavCUT Twist Drill Type N for reliable precision in metal drilling — contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 40071-FDA Type: Type N Diameter: 7.1 mm Tip angle: 118° Spiral length: 69 mm Overall length: 109 mm Execution: short Colour: black Material: HSS Standard: DIN 338 Application: Drills for metal For machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drill diameters where a robust, short HSS geometry is required. Its form is easy to resharpen and holds up under greater loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The main categories are metal drills (like the MetavCUT Twist Drill Type N), wood drills, and stone/concrete drills. Each type features geometry and material optimised for its target substrate. Why are Twist Drills sharpened at the tip? Sharpening reduces the width of the transverse cutting edge at the tip, which lowers friction and therefore the required feed force. At the same time a properly honed tip centres more reliably in the workpiece, improving hole accuracy. Can you drill wood with a metal drill such as the MetavCUT Twist Drill Type N? A metal drill can be used in wood, but guidance and finish will be inferior compared with a purpose-made wood bit. Metal drills are easier to resharpen and show less self-feeding, but expect reduced hole cleanliness and control in timber. At which drilling depths is the Twist Drill most commonly used? A through-hole drilled with a Twist Drill is common practice. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool, offering efficient material removal and stable performance. What is better, HSS or HSSE? The assumption that HSSE steels are always superior to HSS is not universally correct. Evaluate working conditions carefully; HSSE can justify a higher price under specific workloads, but for many standard metal drilling tasks the HSS grade of the MetavCUT Twist Drill Type N provides the best value.

Spiralbohrer (7,2 mm, 118°, Typ N, schwarz, kurz, DIN 338, HSS) von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer nach DIN 338 für präzise Metallbohrungen mit der Handbohrmaschine und eignet sich besonders für gängige Werkstattaufgaben. Spiralbohrer von MetavCUT, HSS, kurze Ausführung DIN 338 konform für präzise Metallbearbeitung 7,2 mm Durchmesser, 118° Spitzenwinkel für Metall Zylinderschaft für Handbohrmaschine, stabile Führung Spirallänge 69 mm, Gesamtlänge 109 mm, schwarze Oberfläche Stabilität durch kurze Bauform für sichere Bohrungen Die kurze Ausführung dieses Bohrers reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren, was vor allem in beengten Arbeitsbereichen einen klaren Vorteil bringt. Anwender profitieren von weniger Vibrationen und geringerer Durchbiegung, sodass das Lochbild sauberer und gleichmäßiger ausfällt. Diese Eigenschaft ist besonders nützlich, wenn mit Handbohrmaschine oder stationären Säulenbohrmaschinen gearbeitet wird, da die Werkzeugaufnahme entlastet wird und die Kontrolle über das Werkstück erhalten bleibt. HSS-Material und Norm erläutert für rationale Wahl HSS steht für High Speed Steel und bietet eine gute Kombination aus Zähigkeit und Verschleißfestigkeit bei Metallbearbeitung. Die Fertigungsart kann rollgewalzt oder geschliffen sein; rollgewalzte Bohrer zeichnen sich durch erhöhte Elastizität aus. Die Norm DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft und garantiert eine einheitliche Ausführung, sodass Ersatz und Austausch einfach möglich sind. Für Anwender bedeutet das: verlässliche Werkzeuge mit vorhersehbarem Verhalten bei unterschiedlichen Metalltypen wie Stahl, Gusseisen und Nichteisenmetallen. Praktischer Einsatzbereich und Anwendungstipps für Handwerk und Industrie Mit einem Durchmesser von 7,2 mm fällt dieser Bohrer in den Standard-Bereich und ist ideal für Werkstatt-, Montage- und DIY-Einsätze. Er eignet sich für dünne bis mittlere Bleche, Profile und Flachstähle sowie für schnelle Durchgangsbohrungen. Bei hoher Maßgenauigkeit empfiehlt sich vorheriges Zentrieren mit einem Anreiß- oder Zentrierbohrer, um das Wandern der Spitze zu vermeiden. Für sehr tiefe Löcher oder gehärtete Werkstoffe sollten spezielle Verfahren oder andere Werkzeuge gewählt werden. Fokus auf Anwendungssicherheit durch Designmerkmale Die Normalspirale (Typ N) sorgt für eine verlässliche Späneförderung bei typischen Metallbearbeitungen, während der 118° Spitzenwinkel ein kontrolliertes Eindringen in viele Werkstoffe ermöglicht. Die schwarze Oberfläche erhöht die Korrosionsbeständigkeit im Alltagseinsatz und erleichtert die Sichtkontrolle beim Bohren. Insgesamt bietet die Kombination aus Material, Geometrie und kurzer Ausführung einen praxisorientierten Nutzen: mehr Prozesssicherheit beim Bohren und geringere Ausfallrisiken durch Bruch. Empfehlung: Vertrauen Sie auf den MetavCUT HSS Spiralbohrer in kurzer Ausführung für belastbare und präzise Metallbohrungen; bei Unsicherheiten steht METAV Werkzeuge mit fachkundiger Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40072-FDA Durchmesser: 7,2 mm Material: HSS Norm: DIN 338 Ausführung: kurz Typ: Typ N (Normalspirale) Spitzenwinkel: 118° Farbe: schwarz Spirallänge: 69 mm Gesamtlänge: 109 mm Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie eignet sich der Spiralbohrer von MetavCUT (HSS, Typ N) für Stahlarbeiten? Der Spiralbohrer von MetavCUT in HSS-Ausführung und Typ N ist für das Bohren in unlegierten und legierten Stahl geeignet; bei gehärteten Stählen ist auf passende Schnittbedingungen und Kühlschmierstoffe zu achten, um Standzeit und Lochqualität zu verbessern. Kann ich den Spiralbohrer von MetavCUT mit einer normalen Handbohrmaschine verwenden? Ja, der Spiralbohrer von MetavCUT wurde als kurze Ausführung konzipiert und ist für den Einsatz mit Handbohrmaschine geeignet, da die reduzierte Auskraglänge die Stabilität erhöht und die Führung erleichtert. Welchen Vorteil bringt der 118° Spitzenwinkel beim MetavCUT Spiralbohrer? Der 118° Spitzenwinkel des MetavCUT Spiralbohrers erleichtert das Anbohren und sorgt für gutes Eindringverhalten in gängige Metalle wie Aluminium und Baustahl, wodurch ein kontrolliertes Vorschubverhalten erreicht wird. Brauche ich vor dem Bohren ein Vorbohren mit einem Zentrierbohrer für den MetavCUT Spiralbohrer? Bei hoher Präzision empfiehlt sich vor dem Einsatz des MetavCUT Spiralbohrers das Anpunkten mit einem Zentrierbohrer, um das Wandern der Spitze zu verhindern und Maßhaltigkeit sicherzustellen. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40072-FDA","sku":"40072-FDA","mpn":"40072-FDA","name":"Spiralbohrer 40072-FDA","description":"Spiralbohrer, HSS, kurz, 7,2 mm Durchmesser, 118° Spitzenwinkel, Typ N (Normalspirale), schwarze Oberfläche; DIN 338 konform; Zylinderschaft für Handbohrmaschine; Spirallänge 69 mm, Gesamtlänge 109 mm.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"7,2 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Spirallänge","value":"69 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"109 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"}],"offers":{"@type":"Offer","priceCurrency":"EUR","price":"1.36"}},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie eignet sich der Spiralbohrer von MetavCUT (Spiralbohrer) für Stahlarbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT in HSS-Ausführung und Typ N eignet sich gut für unlegierten und legierten Stahl; bei gehärteten Stählen sollten passende Schnittbedingungen und Kühlschmierstoffe verwendet werden, um Standzeit und Lochqualität zu verbessern."}},{"@type":"Question","name":"Kann ich den Spiralbohrer von MetavCUT (Spiralbohrer) mit einer normalen Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT wurde in kurzer Ausführung gefertigt und ist für den Einsatz mit Handbohrmaschine geeignet, da die reduzierte Auskraglänge die Stabilität erhöht und die Führung erleichtert."}},{"@type":"Question","name":"Welchen Vorteil bringt der 118° Spitzenwinkel beim MetavCUT Spiralbohrer (Spiralbohrer)?","acceptedAnswer":{"@type":"Answer","text":"Der 118° Spitzenwinkel des MetavCUT Spiralbohrers erleichtert das Anbohren und sorgt für gutes Eindringverhalten in Materialien wie Aluminium und Baustahl, wodurch ein kontrolliertes Vorschubverhalten erreicht wird."}},{"@type":"Question","name":"Brauche ich vor dem Bohren ein Vorbohren mit einem Zentrierbohrer für den MetavCUT Spiralbohrer (Spiralbohrer)?","acceptedAnswer":{"@type":"Answer","text":"Bei hoher Präzision empfiehlt sich vor dem Einsatz des MetavCUT Spiralbohrers das Anpunkten mit einem Zentrierbohrer, um das Wandern der Spitze zu verhindern und Maßhaltigkeit sicherzustellen."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/40072-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS kurze Ausführung"},{"@type":"Thing","name":"DIN 338 kurze Spiralbohrer"},{"@type":"Thing","name":"Typ N Normalspirale"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine empfohlen"},{"@type":"Thing","name":"Zentrierbohrer für höhere Präzision"},{"@type":"Thing","name":"Kühlschmierstoffe für gehärtete Stähle"}]}]}

Spiralbohrer kurz HSS 7,3 mm, Typ N, 118°, schwarz, DIN 338 – MetavCUT Der Spiralbohrer kurz HSS 7,3 mm Typ N ist für präzise Metallbohrungen mit Handbohrmaschine konzipiert und bietet durch die kurze Ausführung erhöhte Stabilität und Zentrierbarkeit. Kurzbauweise für bessere Stabilität und weniger Ausschlag HSS-Material für hohe Verschleißfestigkeit bei Metall Spitze 118° für schnelles Eindringen in weiche bis mittlere Werkstoffe DIN 338 Norm: kurze Spiralbohrer mit Zylinderschaft Geeignet für Handbohrmaschine und Werkstattanwendungen Hohe Präzision und Stabilität bei Metallbohrungen Die kurze Bauform sorgt für deutlich reduzierte Auskragung und erhöht damit die Steifigkeit beim Bohren in Stahl, Gusseisen oder Nichteisenmetallen. Durch die begrenzte Länge lässt sich das Werkstück sicherer führen, was besonders bei wiederholten Lochungen oder beim Bohren in dünnen Blechen zu präziseren Ergebnissen führt. Anwender profitieren von weniger Vibration und einer saubereren Bohrung bei stationären und mobilen Anwendungen. HSS-Material für konstante Schnittleistung Das verwendete HSS bietet eine gute Kombination aus Zähigkeit und Warmfestigkeit, wodurch der Bohrer für legierten und unlegierten Stahl sowie viele Nichteisenmetalle einsetzbar ist. Die Materialeigenschaften ermöglichen eine zuverlässige Standzeit bei typischen Werkstattbedingungen und moderate Kühlschmierstoffe verbessern die Spanabfuhr und Wärmeabfuhr zusätzlich. Der Einsatzbereich umfasst neben Metall auch technische Kunststoffe, sofern die Schnittdaten angepasst werden. Praktische Anwendungsempfehlung für Werkstatt und Montage Im Standard-Bereich (2,0 mm–13,0 mm) ist dieser Bohrer ideal für den Alltagsgebrauch mit Handbohrmaschine und stationären Bohrmaschinen. Für höhere Genauigkeit empfiehlt sich das Anpunschen mit einem Zentrierbohrer vor der Hauptbohrung, um ein Wandern zu vermeiden. Bei dicken oder gehärteten Werkstoffen sollte auf die korrekte Drehzahl und einen passenden Kühlschmierstoff geachtet werden, um optimale Ergebnisse und lange Lebensdauer zu gewährleisten. Bedienungshinweise und Lebensdauer erhöhen Richtige Schnittparameter und regelmäßige Kühlung reduzieren Verschleiß und Ausbrüche an der Schneide. Bei tiefen Bohrungen ist zu beachten, dass Standardspiralen die Spanabfuhr begrenzen; für tiefe Löcher empfiehlt sich schrittweises Aufbohren oder ein spezieller Spiralbohrer. Die Spirallänge von 69 mm und die Gesamtlänge von 109 mm bieten dabei ein ausgewogenes Verhältnis zwischen Einsatzflexibilität und Stabilität. Mit dem MetavCUT HSS Kurzbohrer für Metall auf Präzision setzen und bei METAV Werkzeuge kompetente Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 erhalten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40073-FDA Durchmesser: 7,3 mm Material: HSS Norm: DIN 338 Ausführung: kurz Typ: Typ N Spitzenwinkel: 118° Farbe: schwarz Spirallänge: 69 mm Gesamtlänge: 109 mm Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Eignet sich der Spiralbohrer von MetavCUT für die Handbohrmaschine und welchen Werkstoffen ist er vorbehalten? Der Spiralbohrer von MetavCUT (kurzer HSS-Bohrer, Typ N, 7,3 mm) ist für die Handbohrmaschine geeignet und empfiehlt sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; bei Kunststoffen sind angepasste Schnittparameter zu verwenden. Wie tief kann mit dem MetavCUT Spiralbohrer kurz HSS 7,3 mm sicher gebohrt werden? Bei dem MetavCUT Spiralbohrer kurz HSS 7,3 mm sollte im Standardbetrieb eine Bohrtiefe bis zum Fünffachen des Durchmessers berücksichtigt werden; für tiefere Bohrungen ist schrittweises Aufbohren oder ein spezieller Tiefbohrer empfehlenswert. Welchen Spitzenwinkel hat der MetavCUT Spiralbohrer und was bedeutet das für die Anwendung? Der MetavCUT Spiralbohrer verfügt über einen Spitzenwinkel von 118°, was ein schnelleres Eindringen und gute Zentrierung in weicheren bis mittleren Werkstoffen ermöglicht und somit die Anbohrphase erleichtert. Wie verlängert man die Lebensdauer des MetavCUT Spiralbohrers kurz HSS 7,3 mm? Die Lebensdauer des MetavCUT Spiralbohrers kann durch geeignete Drehzahl, Verwendung von Kühlschmierstoff, korrektes Vorschubverhalten und gegebenenfalls Vorbohren mit einem Zentrierbohrer deutlich verlängert werden. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40073-FDA","sku":"40073-FDA","mpn":"40073-FDA","name":"Spiralbohrer 7,3 mm Typ N kurz","description":"Kurzbauloser HSS-Spiralbohrer 7,3 mm Typ N, Spitzenwinkel 118°, schwarz, DIN 338; geeignet für Metallbearbeitung mit Handbohrmaschine; Spirallänge 69 mm, Gesamtlänge 109 mm; hohe Stabilität und präzise Bohrung bei Stahl und Nichteisenmetallen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"7,3 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Spirallänge","value":"69 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"109 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Preis Netto","value":"1.36 EUR"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Eignet sich der Spiralbohrer von MetavCUT für die Handbohrmaschine und welche Werkstoffe sind geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 7,3 mm Typ N von MetavCUT ist für die Handbohrmaschine geeignet und empfiehlt sich für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; bei Kunststoffen sind angepasste Schnittparameter zu verwenden."}},{"@type":"Question","name":"Wie tief kann mit dem MetavCUT Spiralbohrer kurz HSS 7,3 mm sicher gebohrt werden?","acceptedAnswer":{"@type":"Answer","text":"Mit dem MetavCUT Spiralbohrer kurz HSS 7,3 mm sollte im Standardbetrieb eine Bohrtiefe bis zum Fünffachen des Durchmessers berücksichtigt werden; für tiefere Bohrungen ist schrittweises Aufbohren oder ein spezieller Tiefbohrer empfehlenswert."}},{"@type":"Question","name":"Welchen Spitzenwinkel hat der MetavCUT Spiralbohrer und was bedeutet das für die Anwendung?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 7,3 mm hat einen Spitzenwinkel von 118°, was ein schnelleres Eindringen und gute Zentrierung in weicheren bis mittleren Werkstoffen ermöglicht und die Anbohrphase erleichtert."}},{"@type":"Question","name":"Wie verlängert man die Lebensdauer des MetavCUT Spiralbohrers kurz HSS 7,3 mm?","acceptedAnswer":{"@type":"Answer","text":"Die Lebensdauer des MetavCUT Spiralbohrers kurz HSS 7,3 mm lässt sich durch geeignete Drehzahl, Verwendung von Kühlschmierstoff, korrektes Vorschubverhalten und gegebenenfalls Vorbohren mit einem Zentrierbohrer deutlich verlängern."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/40073-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer kurz Typ N"},{"@type":"Thing","name":"HSS für Metallbearbeitung"},{"@type":"Thing","name":"DIN 338 kurze Spiralbohrer"}],"mentions":[{"@type":"Thing","name":"Spirallänge 69 mm"},{"@type":"Thing","name":"Gesamtlänge 109 mm"},{"@type":"Thing","name":"Handbohrmaschine geeignet"}]}]}

Spiralbohrer kurz Ø 7,4 mm, Spitzenwinkel 118°, Typ N, schwarz, HSS, DIN 338 — MetavCUT Der Spiralbohrer kurz Typ N mit Ø 7,4 mm ist ein robustes Metallbohrwerkzeug für präzise Bohrungen in Baustahl, Guss und Nichteisenmetallen. Hohe Stabilität durch Kurzausführung Geeignet für Metall, Stahl und Gusswerkstoffe HSS-Material reduziert Bruchrisiko bei Feinarbeiten Normkonforme Ausführung nach DIN 338 118° Spitzenwinkel für sauberen Anbohrstart Langlebigkeit durch Materialwahl und Fertigungsart Der Einsatz von HSS (Schnellarbeitsstahl) sorgt für eine ausgewogene Kombination aus Zähigkeit und Verschleißfestigkeit. Beim Bohren in legierte und unlegierte Stähle sowie in Gusseisen ermöglicht das Material eine hohe Dauerbelastbarkeit. Rollgewalzte Fertigungsweisen verringern das Bruchrisiko gerade bei kleinen Durchmessern, was insbesondere bei empfindlichen Arbeitsgängen die Standzeit verlängert und Ausfallzeiten reduziert. Präzision und Stabilität bei kurzen Auskraglängen Die Kurzausführung nach DIN 338 mit Zylinderschaft erhöht die Steifigkeit des Werkzeugs und minimiert Wanken während des Bohrens. Dadurch werden Bohrbilder ruhiger und die Maßhaltigkeit verbessert. Der Bohrertyp Typ N mit Normspirale ist ideal für die Metallbearbeitung konzipiert; er arbeitet zuverlässig in Handbohrmaschinen und stationären Säulenbohrern, wenn vorher zentriert oder angepunktet wird. Vielseitiger Einsatz im Standard-Bereich Mit einem Durchmesser von 7,4 mm gehört der Bohrer in den Standard-Bereich für Alltagsaufgaben in Werkstatt, Montage und Hobbybereich. Anwendungen reichen von Dünnblech über Profile bis zu mittleren Flächen aus Stahl oder Aluminium. Für besonders präzise Passungen empfiehlt sich vor dem endgültigen Bohren Anpunkten oder Vorbohren, um das Wandern des Werkzeugs zu vermeiden und saubere Passungen zu gewährleisten. Anwendungshinweise für optimale Ergebnisse Der Spitzenwinkel 118° erleichtert den Anbohrvorgang und ist besonders geeignet für gängige Metalle; bei sehr harten Werkstoffen kann ein größerer Winkel sinnvoll sein. Kühlung und Schmierung verlängern die Standzeit bei schwer zerspanbaren Materialien. Bei der Verwendung in Handbohrmaschinen auf gleichmäßigen Anpressdruck und passende Drehzahl achten, um Überhitzung und vorzeitigen Verschleiß zu vermeiden. Empfehlung: Das robuste HSS-Kurzspiralbohrer-Sortiment von MetavCUT bietet verlässliche Präzision für Metallarbeiten; bei Unsicherheiten hilft METAV Werkzeuge persönlich per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 weiter Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40074-FDA Durchmesser: 7,4 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 118° Typ: Typ N Ausführung: kurz Material: HSS Norm: DIN 338 Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer MetavCUT Typ N für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in Typ N eignet sich für viele Metalle, bei Edelstahl empfiehlt sich jedoch eine reduzierte Schnittgeschwindigkeit und zusätzliche Kühlung, damit der HSS-Bohrer optimale Standzeiten erreicht. Kann der Spiralbohrer MetavCUT kurz mit einer Handbohrmaschine verwendet werden? Ja, der kurz ausgeführte Spiralbohrer von MetavCUT ist für den Einsatz in Handbohrmaschinen vorgesehen und bietet aufgrund der geringen Auskraglänge bessere Stabilität als lange Varianten. Warum steht die Norm DIN 338 auf der Produktbeschreibung des MetavCUT Spiralbohrers? DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft, weshalb der MetavCUT Spiralbohrer nach dieser Norm gefertigt wird; das garantiert Abmessungsrichtigkeit und Kompatibilität mit gängigen Bohrfuttern. Wie beeinflusst der Spitzenwinkel 118° die Leistung des MetavCUT Spiralbohrers? Der 118° Spitzenwinkel des MetavCUT Spiralbohrers sorgt für leichteres Anbohren und saubere Bohrungen in gängigen Metallen; bei sehr harten Werkstoffen kann ein flacherer Winkel Vorteile bringen. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40074-FDA","sku":"40074-FDA","mpn":"40074-FDA","name":"Spiralbohrer 40074-FDA","description":"Spiralbohrer kurz Ø 7,4 mm, Spitzenwinkel 118°, Typ N, schwarz, HSS, DIN 338 – robuster Kurzbohrer für präzise Bohrungen in Baustahl, Guss und Nichteisenmetallen; hohe Steifigkeit durch Kurzausführung; rollgewalztes HSS reduziert Bruchrisiko; Normkonforme Fertigung nach DIN 338.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"7,4 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"109 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"69 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer MetavCUT Typ N für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT Typ N eignet sich für viele Metalle; bei Edelstahl empfiehlt sich reduzierte Schnittgeschwindigkeit und zusätzliche Kühlung, damit der HSS-Bohrer optimale Standzeiten erreicht."}},{"@type":"Question","name":"Kann der Spiralbohrer MetavCUT kurz mit einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der kurz ausgeführte Spiralbohrer MetavCUT Typ N ist für den Einsatz in Handbohrmaschinen vorgesehen und bietet aufgrund der geringen Auskraglänge bessere Stabilität als lange Varianten."}},{"@type":"Question","name":"Warum steht die Norm DIN 338 auf der Produktbeschreibung des MetavCUT Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft; der MetavCUT Spiralbohrer wird nach dieser Norm gefertigt, was Abmessungsrichtigkeit und Kompatibilität mit gängigen Bohrfuttern garantiert."}},{"@type":"Question","name":"Wie beeinflusst der Spitzenwinkel 118° die Leistung des MetavCUT Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Der 118° Spitzenwinkel des MetavCUT Spiralbohrers sorgt für leichteres Anbohren und saubere Bohrungen in gängigen Metallen; bei sehr harten Werkstoffen kann ein größerer Winkel vorteilhaft sein."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-40074-fda","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer kurz"},{"@type":"Thing","name":"HSS-Bohrer für Metall"},{"@type":"Thing","name":"DIN 338 Norm"}],"mentions":[{"@type":"Thing","name":"Rollgewalztes HSS"},{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Kurzausführung für höhere Steifigkeit"}]}]}

Twist Drill — Type N short HSS metal drill, 7.5 mm, 118° tip, black, DIN 338, MetavCUT The Twist Drill Type N short HSS bit is a compact metalworking drill designed for hand drills and drilling machines, delivering stable, precise holes in steel, cast iron and non‑ferrous metals. Short Type N design for high stability Suitable for metalworking on drilling machines 7.5 mm diameter with 118° tip for clean starts Made from HSS for long tool life Conforms to DIN 338 for short cylinder‑shank drills Stable precision for demanding metalwork The short construction specified by DIN 338 reduces overhang and dramatically increases rigidity, which means the bit resists bending and produces more accurate holes. As a Type N normal‑spiral tool, this 7.5 mm drill offers predictable chip evacuation and constant cutting geometry—advantages that translate directly into reproducible hole quality and less rework for workshops and maintenance teams. For tasks where repeatability matters, the compact design is the decisive practical benefit. Easier centring and lower feed forces with a 118° tip A 118° tip angle balances fast penetration and reliable centring on typical metal surfaces; the geometry reduces the initial cutting area so the drill starts cleanly without excessive wobble. The tip can be resharpened easily to restore cutting performance, and the reduced querschneide after precision sharpening lowers friction and required feed forces. These characteristics shorten cycle times on hand and bench drills while preserving drill life. HSS material for versatility and resilience Made from HSS (High Speed Steel), this short bit withstands higher temperatures and retains hardness under load, making it suitable for alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics. The material choice enables controlled cutting at moderate speeds and allows straightforward resharpening in‑house, which keeps replacement costs down and supports continuous operation in busy workshops. Recommended applications and machine compatibility Built for metal drilling, this bit is optimised for use in Hand Drills and stationary drilling machines where short overhang improves stability. Typical uses include production drilling, maintenance, and repair where a reliable, durable hole is required. The normal spiral makes it less suited for soft‑wood applications but ideal where chip formation and evacuation are critical. For precision work on thin or plated parts, the short length reduces chatter and improves surface finish. Strong recommendation: Choose the MetavCUT short Type N HSS Twist Drill for precise metalworking — METAV Werkzeuge offers expert advice and technical support via 📧 info@metav-werkzeuge.com, ☎️ +49 2822 7131930 or ✔️ WhatsApp +49 170 2837271 Technical Information Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40075-FDA Typ: Type N Durchmesser: 7.5 mm Spitzenwinkel: 118° Ausführung: short Material: HSS Norm: DIN 338 Spirallänge (Flute length): 69 mm Gesamtlänge (Overall length): 109 mm Farbe: black Anwendung: Drills for metal Für Bohrmaschine: Hand Drill / Drilling Machine Bezeichnung (englisch): Twist Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Type N drill? A MetavCUT Twist Drill Type N is primarily used for metalworking; the short HSS design excels when drilling alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics, providing reliable chip removal and durable cutting performance. Why are Twist Drills ground to a tip angle like 118°? The 118° geometry on the MetavCUT Type N Twist Drill reduces the cross‑cut at the tip, which lowers friction and feed forces; this sharpening makes centring easier and requires less push during drilling, improving start behavior and precision. For what applications are Twist Drills typically used? Twist Drills are widely applied when machining high‑strength materials and larger diameters; they are easy to resharpen and remain robust under higher loads, which makes the MetavCUT short HSS variant suitable for production and repair work. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Type N Twist Drill belongs to the metal drill category and is optimised for those materials. Can a metal drill be used to drill wood? A metal drill, such as the MetavCUT Type N Twist Drill, can be used in wood but generally gives less guidance and a rougher finish compared with dedicated wood bits; however, metal drills are easier to regrind and typically show lower self‑feeding behavior. At which depths is the Twist Drill most commonly used? A full‑bore hole is often executed with a Twist Drill; for diameters up to 20 mm and hole depths up to 100 mm, the short HSS twist drill is among the most commonly used tools. Is HSS or HSSE better? The belief that HSSE steels are categorically superior to HSS is not universally true; evaluate working conditions first—higher cost of HSSE is justified only when the application demands its specific advantages over standard HSS.

Twist Drill — Type N short HSS, 7.6 mm, 118° tip, black, DIN 338 (MetavCUT) The Twist Drill is a short Type N HSS twist drill for metal drilling, offering precise 7.6 mm holes with a 118° tip angle for use in hand drilling machines. Short HSS design for higher stability 7.6 mm diameter for precise metal holes 118° tip for reliable centring Complies with DIN 338 standard Suitable for hand drill applications Robust material for reliable metalworking results Hardened HSS (High Speed Steel) provides a balance of toughness and wear resistance that benefits everyday workshop and trade use. The short design reduces overhang and therefore vibration, which improves hole quality when working with metal. This combination makes the tool durable under typical loads and simplifies handling during repetitive tasks, so fewer rejects and cleaner holes are achieved with less reworking. Precision features that improve centring and control A 118° tip angle paired with the classic Type N spiral geometry promotes straightforward centring on most metals and eases entry into the workpiece. The shorter flute length increases stiffness and reduces deflection, giving better positional accuracy in handheld applications. For operators who prioritise precise alignment and repeatable hole locations, this configuration translates directly into faster set-up and less scrap. Designed for professional users and general workshop tasks This twist drill is optimised for machining operations on ferrous and non‑ferrous metals and is intended for use with a hand drill or compatible drilling machines. Craftspeople, maintenance technicians and small machine shops will benefit from the improved stability and the robust HSS material. The tool is particularly suitable where controlled, straight drilling is required and where frequent tool changes or resharpening are part of the workflow. Standards, sharpening and practical guidance Manufactured to DIN 338, the short format supports machining on both stationary and mobile drilling equipment. Regular sharpening of the point reduces the chisel edge width and lowers friction, which in turn diminishes necessary feed force and improves centring behaviour. When drilling harder alloys consider an adapted point geometry; for general metalworking the standard 118° offers a good compromise between cutting entry and centring performance. Secure precise metalworking results with the MetavCUT Twist Drill — contact METAV Werkzeuge for expert advice and purchasing support via email: info@metav-werkzeuge.com, phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 40076-FDA Diameter: 7.6 mm Spiral length: 69 mm Overall length: 117 mm Tip angle: 118° Execution: short Type: Type N Material: HSS Application: Drills for metal Colour: black Norm: DIN 338 For drill machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is mainly used for machining high‑strength materials and larger bore diameters; its form allows straightforward resharpening and it withstands considerable loads, making it suitable for demanding metalworking tasks. Which three drill types exist? There are three common drill types: metal drill, wood drill and stone/concrete drill — the MetavCUT Twist Drill belongs to the metal drill category and is engineered accordingly. Why are twist drills sharpened? Sharpening reduces the chisel edge at the tip of the twist drill, which lowers friction and therefore the required feed force; this also improves centring of the MetavCUT Twist Drill in the workpiece and leads to cleaner drilling. Can a metal twist drill be used for wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are usually inferior to purpose‑made wood bits; metal drills are easier to resharpen and have less self‑feed compared with specialised wood drills.

Spiralbohrer HSS, Typ N, kurz — 7,75 mm, 118°, schwarz, DIN 338, MetavCUT Der Spiralbohrer in kurzer Ausführung eignet sich für präzise Metallbohrungen mit Handbohrmaschine und bietet durch HSS-Rollgewalzung hohe Elastizität und Stabilität. Spiralbohrer MetavCUT HSS, kurz, DIN 338 Optimale Stabilität durch kurze Ausführung Spitzenwinkel 118° für sicheres Anbohren Geeignet für legierte und unlegierte Stähle Zylinderschaft passend für Handbohrmaschine Robuste Werkstoffwahl für dauerhafte Leistung Die Wahl von HSS (Schnellarbeitsstahl) und die rollgewalzte Fertigung sorgen für eine erhöhte Elastizität und reduzieren das Bruchrisiko bei feinen Bohrungen. Die Norm DIN 338 bestätigt die Einordnung als kurzer Spiralbohrer mit Zylinderschaft, wodurch das Werkzeug besonders stabil in der Aufnahme liegt. Für Anwender bedeutet das längere Standzeit, weniger Werkzeugwechsel und damit effizientere Bearbeitungsprozesse. Präzision beim Anbohren und beim Bohren Der Spitzenwinkel 118° erleichtert das Zentrieren und reduziert das Wandern beim Anbohren, insbesondere in weicheren und mittelharten Metallen. Als Typ N Normalspirale ist der Bohrer für Metall optimiert und liefert saubere, runde Bohrungen ohne übermäßigen Grat. Anwender profitieren von gleichmäßigem Spanbruch und einfacher Nachbearbeitung der Bohrung. Einsatzmöglichkeiten und Zielgruppe Mit einem Durchmesser von 7,75 mm liegt dieses Spiralwerkzeug im Standard-Bereich für Werkstatt, Montage und DIY-Anwendungen. Es ist ideal für Handwerker und Hobbyanwender, die mit Handbohrmaschine oder stationären Maschinen arbeiten und dünne bis mittlere Bleche, Profile oder Flachstahl bearbeiten. Die kurze Ausführung bietet zusätzliche Steifigkeit, wodurch sich das Werkzeug für präzise Arbeiten in anspruchsvollen Materialien eignet. Handhabung, Schnittbedingungen und Pflegehinweise Die Spirallänge 75 mm und die Gesamtlänge von 117 mm ergeben eine kompakte Geometrie, die Vibrationen reduziert. Für saubere Ergebnisse empfiehlt sich angemessene Kühlschmierung bei zähen Werkstoffen und ein moderater Vorschub zur Spanabfuhr. Zur Verlängerung der Lebensdauer sollten Anbohren mit Zentrierbohrer und schrittweises Aufbohren bei größeren Tiefen in Betracht gezogen werden. Setzen Sie auf den MetavCUT Spiralbohrer für präzise Metallbohrungen — für persönliche Beratung und technische Klärung: info@metav-werkzeuge.com | +49 2822 7131930 Technische Informationen Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 400775-FDA Durchmesser: 7,75 mm Spitzenwinkel: 118° Typ: Typ N Ausführung: kurz Farbe: schwarz Material: HSS Norm: DIN 338 Spirallänge: 75 mm Gesamtlänge: 117 mm Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall / Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der MetavCUT Spiralbohrer HSS Typ N für Edelstahl geeignet? Der MetavCUT Spiralbohrer HSS Typ N ist für legierte und unlegierte Stähle ausgelegt; bei Edelstahl sind reduzierte Schnittgeschwindigkeiten und ausreichende Kühlung empfehlenswert, damit der Spiralbohrer Standzeit behält. Kann der Spiralbohrer MetavCUT mit einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer MetavCUT in kurzer Ausführung wurde bewusst für den Einsatz an Handbohrmaschine und stationären Maschinen konzipiert und bietet erhöhte Stabilität bei handgeführten Arbeiten. Wie tief kann mit dem MetavCUT Spiralbohrer gebohrt werden? Für sichere Spanabfuhr und Werkzeugleben sollte die Spirallänge von 75 mm berücksichtigt werden; bei tiefen Löchern empfiehlt sich stufenweises Aufbohren, damit der Spiralbohrer optimal funktioniert. Wie pflegt man den Spiralbohrer MetavCUT HSS, um die Lebensdauer zu verlängern? Regelmäßiges Reinigen der Spirale, Einsatz geeigneter Kühlschmierstoffe und abgestimmte Schnittparameter schützen den MetavCUT Spiralbohrer HSS und sichern konstante Bohrergebnisse. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#400775-FDA","sku":"400775-FDA","mpn":"400775-FDA","name":"Spiralbohrer 400775-FDA","description":"Spiralbohrer MetavCUT HSS, kurz, Typ N, Durchmesser 7,75 mm, Spitzenwinkel 118°, Farbe schwarz, Norm DIN 338; robustes HSS-Material und rollgewalzte Fertigung für stabile Metallbohrungen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"7,75 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall / Drills for metal"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der MetavCUT Spiralbohrer HSS Typ N für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer HSS Typ N ist für legierte und unlegierte Stähle ausgelegt; bei Edelstahl sind reduzierte Schnittgeschwindigkeiten und ausreichende Kühlung empfehlenswert, damit der Spiralbohrer Standzeit behält."}},{"@type":"Question","name":"Kann der Spiralbohrer MetavCUT mit einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT in kurzer Ausführung wurde bewusst für den Einsatz an Handbohrmaschine und stationären Maschinen konzipiert und bietet erhöhte Stabilität bei handgeführten Arbeiten."}},{"@type":"Question","name":"Wie tief kann mit dem MetavCUT Spiralbohrer gebohrt werden?","acceptedAnswer":{"@type":"Answer","text":"Für sichere Spanabfuhr und Werkzeugleben sollte die Spirallänge von 75 mm berücksichtigt werden; bei tiefen Löchern empfiehlt sich stufenweises Aufbohren, damit der Spiralbohrer optimal funktioniert."}},{"@type":"Question","name":"Wie pflegt man den Spiralbohrer MetavCUT HSS, um die Lebensdauer zu verlängern?","acceptedAnswer":{"@type":"Answer","text":"Regelmäßiges Reinigen der Spirale, Einsatz geeigneter Kühlschmierstoffe und abgestimmte Schnittparameter schützen den MetavCUT Spiralbohrer HSS und sichern konstante Bohrergebnisse."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/400775-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS kurz"},{"@type":"Thing","name":"MetavCUT Bohrer"},{"@type":"Thing","name":"Bohrer für Metall"}],"mentions":[{"@type":"Thing","name":"DIN 338 Norm"},{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Rollgewalzte Fertigung"},{"@type":"Thing","name":"Zylinderschaft"}]}]}

Twist Drill — Type N, HSS short, 7.7 mm, 118°, black, DIN 338 The Twist Drill Type N is a short HSS metal drill designed for precise drilling in steel and non-ferrous metals, suitable for hand drills and stationary drilling machines. Short HSS design for higher stability 7.7 mm diameter for precise metal holes 118° point angle for improved centering Conforms to DIN 338 for consistent quality Suitable for hand drills and drilling machines Stability and precision for metalworking Short-design HSS drill bits offer noticeably reduced flex during cutting, which increases precision when working with metals. The compact geometry of this short Twist Drill reduces overhang from the chuck and therefore minimises vibration and run-out. With a 7.7 mm diameter and the Type N normal spiral, the tool provides a reliable geometry for producing clean, cylindric holes in alloyed and unalloyed steel. Conformity to DIN 338 signals consistent manufacturing tolerances and repeatable results across batches. Material performance and application Understanding why HSS (High Speed Steel) is chosen helps assess suitability: HSS combines hardness and elasticity, allowing the drill to withstand heat and maintain cutting edges under standard metalworking conditions. This makes the short Twist Drill particularly effective for machining steel, cast iron, non-ferrous metals and certain plastics. The 118° point angle favours easier centring on curved or softer surfaces and reduces the required axial force compared with steeper angles, which improves handling during manual drilling. Who benefits from this tool Workshops and maintenance technicians who prioritise accuracy and tool life will value the design of this MetavCUT product. Operators using portable hand drills as well as production machines benefit from the shorter working length, which delivers enhanced stiffness and repeatability. For users who need a classic metal drill geometry, the Type N spiral is the established choice for general-purpose metal drilling, offering straightforward re-sharpening when required. Durability, handling and practical tips A short Twist Drill designed in HSS is easier to stabilise in the chuck and tends to produce better edge life under moderate cutting speeds. For best results, start with a light pilot and steady feed, and adjust coolant or cutting lubricant when drilling tougher alloys to extend service life. The point geometry supports quicker initial penetration, while the solid material composition allows controlled resharpening on standard grinding equipment, preserving the original cutting geometry and extending tool usability. Strong recommendation: For precise metal drilling choose the MetavCUT Twist Drill with HSS short design and 118° point angle — for expert advice or to confirm suitability for a specific task contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill (short) Marke: MetavCUT SKU: 40077-FDA Typ: Type N Diameter: 7.7 mm Point angle: 118° Material: HSS Finish/Version: short Colour: black Spiral length: 75 mm Overall length: 117 mm Application: Drills for metal Suitable for: Hand drills and Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The Twist Drill from MetavCUT is primarily applied to the machining of high-strength materials and for larger drilling diameters where robustness is required. This short HSS metal drill is easy to sharpen and resists higher loads, making it suitable for demanding metalworking tasks. Which three drill types are there? Common drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for steel and other metallic materials. Why are Twist Drills sharpened at the tip? The tip grind reduces the chisel edge area at the drill point, significantly lowering friction and therefore the required feed force. For the MetavCUT Twist Drill, a sharpened tip also improves centring in the workpiece and reduces heat generation during cutting. Can a Twist Drill be used for wood drilling? A metal-purpose Twist Drill such as the MetavCUT variant can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal drills tend to have less accurate guidance and produce a less clean hole, although they are easier to resharpen and show reduced self-feeding.

Twist Drill — Type N, 7.8 mm, 118°, HSS, short, black, DIN 338 (MetavCUT) The Twist Drill from MetavCUT is a short Type N drill designed for precision metalworking in drilling machines and hand drills, offering a 7.8 mm diameter and a 118° point angle for reliable centring and stable performance. Short HSS design for improved stability Precise 7.8 mm diameter for accurate holes 118° point angle for better centring on workpieces Conforms to DIN 338 for short twist drills Suitable for drilling machines and hand drills Robust HSS construction for durable metalworking Built from HSS (High Speed Steel), this short Twist Drill combines toughness and elasticity for demanding metal applications. The roll-formed HSS manufacturing process reduces the risk of breakage when drilling smaller diameters and provides consistent performance in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The compact geometry increases rigidity, which means fewer vibrations and cleaner hole quality when used in appropriate machines. Short length and Type N spiral for precision and stability A shorter overall length reduces overhang and thus the tendency to bend, delivering higher accuracy during machining. The short execution specified by DIN 338 makes the tool particularly suitable where stability and concentricity matter. The Type N normal spiral flute is optimised for metalwork, guiding chips away reliably while maintaining cutting edge life, and the 118° point angle supports easier centring on curved or less-than-flat surfaces. Practical guidance on application and material compatibility When the task involves drilling into steel, cast components or non-ferrous metals, the MetavCUT short Twist Drill is a practical choice thanks to its HSS composition and classical flute geometry. For softer materials a different point angle may be preferable, but for standard metalwork this configuration balances penetration and edge robustness. Regular checking of feed and speed settings in the drilling machine helps to maximise tool life and hole finish. Who benefits and how to get optimal results Workshop professionals and maintenance technicians who require repeatable, precise holes in metal benefit most from this short HSS Type N design. For best results, use appropriate cutting fluid when machining steels, ensure the drill chuck is concentric and avoid excessive feed that could overload the small-diameter flute. Proper resharpening of the 118° tip restores centring performance and lowers the required feed forces. MetavCUT recommends the short HSS Type N Twist Drill for reliable, high‑precision metal drilling; for technical advice, suitability checks or further specifications contact METAV Werkzeuge — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 40078-FDA Type: Type N Diameter: 7.8 mm Point angle: 118° Material: HSS (High Speed Steel) Spiral length: 75 mm Overall length: 117 mm Execution: short Colour: black Application: Drills for metal Standard: DIN 338 For drilling machine: Drilling machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and where does the MetavCUT Type N excel? The MetavCUT Twist Drill Type N is mainly applied to machining high-strength materials and larger bore diameters in metalworking; its short HSS design offers stability and easier handling under demanding loads, providing longevity and reliable performance for workshop and production use. Which three drill types exist and how does this product fit in? The three common drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks with a Type N spiral and HSS material. Why are Twist Drills pointed and what is the benefit of the 118° tip on the MetavCUT drill? The point reduces the cross-edge at the tip of a Twist Drill; by pointing the tip the friction is significantly lowered, requiring less feed force and improving centring in the workpiece. The 118° geometry on the MetavCUT item balances penetration and centring for many common metals. Can a metal Twist Drill be used to bore wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and surface finish are inferior compared with dedicated wood drills. Metal drills are easier to resharpen and have lower self-feeding tendencies, yet they provide less precise tracking in soft timber. For which drilling depths and diameters is the Twist Drill most commonly used? A solid bore is typically made with a Twist Drill. For diameter ranges up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most frequently used tool, making the MetavCUT short HSS drill suitable for many standard metalworking operations. Is HSS or HSSE better for metal drilling? The general belief that HSSE steels are always superior to HSS is not universally correct. Selection should consider actual working conditions and whether the higher acquisition cost of HSSE is justified; MetavCUT provides advice to choose the most appropriate grade for the intended application.

Twist Drill — Type N short HSS drill, 7.9 mm, 118°, black, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS metal drill designed for precision drilling in steel and non-ferrous materials, compatible with standard Drilling Machines and handheld units. Short HSS design for increased stability 7.9 mm diameter with 118° tip for reliable centring Conforms to DIN 338 for short twist drills Type N Normal spiral optimised for metal drilling Black finish for clear visual contrast during machining Long-lasting HSS construction for demanding metalwork Deriving strength from High Speed Steel (HSS), this short twist drill combines elasticity and toughness to resist breakage when machining small diameters. The HSS composition makes the tool especially suitable for drilling in alloyed and unalloyed Steel, Cast Iron, Non-Ferrous Metals and various Plastics, while retaining the ability to be resharpened easily. This focus on material quality results in a tool that offers predictable wear behaviour and extended service life for repetitive metalworking tasks. Improved precision thanks to short design and 118° tip A shorter overall length reduces overhang and bending, delivering greater Stability and more accurate hole positioning during high-precision operations. The 118° tip angle favours fast penetration and improved centring on curved or softer surfaces, making it a practical choice when consistent hole geometry is required. Together, the short execution and the tip geometry minimise deviation and chatter, which increases first-pass accuracy in production or repair work. Optimised for metal: Type N spiral and DIN 338 compliance The Normal spiral of Type N is a classic geometry tailored to metal drilling: it balances efficient chip removal with robust cutting edges. Conformance to DIN 338 clarifies that this is a short twist drill with a cylinder shank manufactured to industry standards, ensuring interchangeability and reliable performance in both stationary and portable drilling equipment. For tasks involving drilled holes in metal components, this configuration offers a dependable combination of repeatability and tool life. Practical compatibility and recommended uses Designed for use in standard Drilling Machines and handheld devices, the drill’s 7.9 mm diameter and 117 mm total length make it well suited for through-holes and shallow-depth bore operations up to typical industrial limits. The short spiral length improves rigidity for tougher alloys and reduces wobble when drilling from the face of the workpiece. This makes the tool appropriate for maintenance, prototyping and small-batch production where precision and resilience are required. Who benefits from this drill Machinists, maintenance technicians and workshop professionals engaged in metal fabrication and repair will value the balance of Precision and durability offered by this short HSS twist drill. Its suitability for a range of steels and non-ferrous materials, together with easy resharpening, supports cost-effective tool management and predictable machining results even under frequent use. Strong recommendation: For precise metal drilling choose the MetavCUT Twist Drill Type N — contact METAV Werkzeuge for full technical advice and order support at info@metav-werkzeuge.com or +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40079-FDA Diameter: 7.9 mm Spiral length: 75 mm Total length: 117 mm Tip angle: 118° Material: HSS (High Speed Steel) Execution: short Type: Type N Colour: black Application: Drills for metal Compatible machine: Drilling Machine / Hand Drilling Machine Standard: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) best used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high-strength materials and larger drill diameters in metalworking. Its design allows for straightforward resharpening and it withstands greater loads, making it suitable for alloyed and unalloyed Steel, Cast Iron, Non-Ferrous Metals and Plastics. Which three drill types exist? The main categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group optimised for steel and related materials. Why are Twist Drills pointed? Pointing reduces the cross-cut at the tip of the Twist Drill, significantly lowering friction and thus requiring smaller feed forces. At the same time the sharpened tip improves centring in the workpiece for more accurate hole starts with the MetavCUT Type N. Can the Twist Drill (MetavCUT, Type N) be used for wood drilling? A metal drill such as the MetavCUT Twist Drill Type N can be used in wood, but guidance and finish are usually inferior compared with dedicated wood bits. Metal drills are easier to resharpen and tend to have less self-feed in wood. For which drilling depths is a Twist Drill most commonly used? A solid bore is typically performed with a Twist Drill. For diameters up to about 20 mm and drilling depths up to 100 mm a Twist Drill is the most frequently used tool, including the MetavCUT Type N configuration. Is HSS or HSSE better? The general assumption that HSSE steels are always superior to HSS is incorrect. Assess working conditions carefully to decide whether the higher purchase price of HSSE is justified; for many standard metal drilling tasks the MetavCUT HSS answer is appropriate.

Spiralbohrer – 7 mm, 118° Spitzenwinkel, Typ N, schwarz, kurze Ausführung, DIN 338, HSS von MetavCUT Der Spiralbohrer von MetavCUT ist ein kurzer HSS-Bohrer für präzise Metallbohrungen in Werkstatt und Montage, geeignet für Handbohrmaschine und stationäre Maschinen. HSS rollgewalzt für erhöhte Elastizität Für Metallbohrungen nach DIN 338 ausgelegt 7 mm Durchmesser mit 118° Spitzenwinkel Kurze Ausführung für höhere Stabilität beim Bohren Höhere Stabilität durch kurze Bauweise für präzise Bohrungen Die kurze Ausführung dieses Bohrers reduziert die Auskraglänge und minimiert damit Vibrationen und Verkantung, was besonders bei anspruchsvollen Metallarbeiten zu saubereren Bohrbildern führt. Der Einsatz von HSS sorgt für eine gute Elastizität des Werkzeugs, während die Klassifizierung nach DIN 338 die Fertigungs- und Abmessungsqualität sicherstellt. Diese Kombination ermöglicht eine zuverlässige Bearbeitung von Blechen und Profilen mit hoher Maßhaltigkeit. Zuverlässige Leistung bei vielfältigen Metallwerkstoffen Bei normalen Werkstattaufgaben bietet der rollgewalzte HSS-Schneidenaufbau eine ausgewogene Kombination aus Zähigkeit und Verschleißfestigkeit, sodass der Bohrer für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe eingesetzt werden kann. Die Typ N Normalspirale ist dabei die gängige Wahl für Metallbohrungen und unterstützt einen zuverlässigen Spanabtransport, wodurch die Arbeitszyklen effizient bleiben. Ideal für Handwerk, Montage und Hobbywerstatt Mit einem Durchmesser von 7 mm liegt dieser Bohrer im Standard-Bereich, wodurch er sich sehr gut für den Alltag in Werkstatt, Montage und Heimwerkerprojekten eignet. Die kurze Bauform und der Zylinderschaft machen den Bohrer kompatibel mit gängigen Handbohrmaschinen und Akkubohrschraubern, wobei die Stabilität die Gefahr von Bohrerwandern reduziert und die Qualität der Bohrung erhöht. Hinweise zur Anwendung und Pflege für langlebige Ergebnisse Der 118° Spitzenwinkel bietet einen guten Kompromiss zwischen Anbohrverhalten und Standzeit; bei sehr harten Werkstoffen kann ein größerer Winkel vorteilhaft sein. Zur Verlängerung der Standzeit empfiehlt sich geeignete Kühlung und das regelmäßige Entfernen der Späne, damit die Spirale nicht verstopft. Der Zylinderschaft erlaubt ein sicheres Einspannen in Standardbohrfutter und erleichtert schnellen Werkzeugwechsel bei Serienarbeiten. Sichern Sie sich den MetavCUT HSS-Spiralbohrer kurz für präzise Metallbohrungen und kontaktieren Sie bei Fragen die METAV Beratung per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40070-FDA Durchmesser: 7 mm Spirallänge: 69 mm Gesamtlänge: 109 mm Ausführung: kurz Typ: Typ N Material: HSS Norm: DIN 338 Spitzenwinkel: 118° Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Schaft: Zylinderschaft Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Werkstoffe eignet sich der Spiralbohrer von MetavCUT am besten? Der Spiralbohrer von MetavCUT als kurzer HSS-Bohrer ist für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe geeignet; bei sehr hartem Edelstahl kann ein Bohrer mit 135° Spitzenwinkel besser sein. Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer MetavCUT mit Zylinderschaft und 7 mm Durchmesser ist für Handbohrmaschine und gängige Akkubohrschrauber ausgelegt und entspricht dem Einsatzspektrum des Standard-Bereichs. Wie verlängere ich die Lebensdauer des MetavCUT HSS-Spiralbohrers? Durch Einsatz von Kühlmittel, angepasste Schnittgeschwindigkeit und regelmäßiges Entfernen der Späne lässt sich die Standzeit des MetavCUT HSS-Spiralbohrers deutlich verbessern. Entspricht der Spiralbohrer von MetavCUT der Norm DIN 338? Ja, der Spiralbohrer MetavCUT ist nach DIN 338 gefertigt und erfüllt damit die Anforderungen für kurze Spiralbohrer mit Zylinderschaft aus Schnellarbeitsstahl. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40070-FDA","sku":"40070-FDA","mpn":"40070-FDA","name":"Spiralbohrer 40070-FDA","description":"Kurzer HSS-Spiralbohrer, Durchmesser 7 mm, 118° Spitzenwinkel, Typ N, schwarz, kurze Ausführung nach DIN 338; geeignet für Metallbohrungen in Werkstatt und Montage; rollgewalzte HSS-Schneide für erhöhte Elastizität.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"7 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"69 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"109 mm"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Schaft","value":"Zylinderschaft"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}],"author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"}},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Werkstoffe eignet sich der Spiralbohrer von MetavCUT am besten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT als kurzer HSS-Bohrer ist für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe geeignet; bei sehr hartem Edelstahl kann ein Bohrer mit 135° Spitzenwinkel besser sein."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT mit Zylinderschaft und 7 mm Durchmesser ist für Handbohrmaschine und gängige Akkubohrschrauber ausgelegt und entspricht dem Einsatzspektrum des Standard-Bereichs."}},{"@type":"Question","name":"Wie verlängere ich die Lebensdauer des MetavCUT HSS-Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Durch Einsatz von Kühlmittel, angepasste Schnittgeschwindigkeit und regelmäßiges Entfernen der Späne lässt sich die Standzeit des MetavCUT HSS-Spiralbohrers deutlich verbessern."}},{"@type":"Question","name":"Entspricht der Spiralbohrer von MetavCUT der Norm DIN 338?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT ist nach DIN 338 gefertigt und erfüllt damit die Anforderungen für kurze Spiralbohrer mit Zylinderschaft aus Schnellarbeitsstahl."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/40070-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer kurz"},{"@type":"Thing","name":"HSS Schnellarbeitsstahl"},{"@type":"Thing","name":"DIN 338 kurze Spiralbohrer"}],"mentions":[{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Zylinderschaft"},{"@type":"Thing","name":"Rollgewalzte Schneide"}]}]}

MetavCUT Twist Drill (Type N) — 8.1 mm · 118° tip · HSS · Short · Black · DIN 338 A MetavCUT Twist Drill (Type N) for precision metal drilling, designed as a short HSS drill for use with hand drilling machines. Short HSS construction for increased stability Precision 8.1 mm diameter for consistent hole quality 118° tip angle for reliable centring in metals Conforms to DIN 338 for standardised short twist drills Suitable for hand drilling machines and workshop use Stable, accurate holes for metalworking tasks The HSS material of this short twist drill offers a reliable balance of hardness and toughness for metalworking. Thanks to its short design, the tool exhibits reduced deflection and higher stability during drilling, which translates into more precise holes and less wear on the drill shank. This characteristic is particularly important when working with tougher materials or when drilling by hand, since a more rigid tool reduces the risk of wobble and off-centre bores. Cutting geometry optimised for clean starts and centring Equipped with a 118° tip and the classic Type N spiral, this twist drill provides predictable entry behaviour and good centring on a variety of metals. A 118° point angle reduces the initial cutting force and supports easier alignment on slightly curved or irregular surfaces. The combination of point geometry and the normal spiral pitch means the drill removes chips reliably while maintaining a controlled cutting action—an advantage for both manual drilling and machine use. Designed for workshop versatility and user convenience With a spiral length of 75 mm and an overall length of 117 mm, the short execution ensures compact handling and improved rigidity in confined setups. The MetavCUT Twist Drill is finished in black and manufactured to DIN 338 standards, making it a suitable choice for drilling alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics. The roll-walzen HSS production process yields an elastic drill that is easier to resharpen and reduces brittle fracture risk for smaller diameters. Choose the MetavCUT Twist Drill for workshop-grade metal drilling — METAV Werkzeuge offers expert technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) to help select the right tool for the task Technical data Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40081-FDA Durchmesser: 8.1 mm Spitzenwinkel: 118° Spirallänge: 75 mm Gesamtlänge: 117 mm Farbe: black Ausführung: short Typ: Type N Material: HSS Norm: DIN 338 Anwendung: Drills for metal Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (Type N) be used on? The MetavCUT Twist Drill Type N is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics; its HSS composition makes it versatile for a broad range of metal drilling tasks. Is the MetavCUT Twist Drill suitable for use with a hand drilling machine? Yes, the MetavCUT Twist Drill in short execution is designed for compatibility with hand drilling machines and offers improved rigidity and control during manual operation. For what is a Twist Drill used? A Twist Drill such as the MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger hole diameters. Its form allows for straightforward resharpening and it withstands greater loads. Which three drill types exist? The main categories are metal drills (like the MetavCUT Twist Drill), wood drills and stone/concrete drills. Why are Twist Drills sharpened at the point? The point sharpening reduces the cross‑cut at the tip of the twist drill; sharpening lowers friction forces and therefore requires less feed force while improving centring in the workpiece. Can a metal drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but it typically offers poorer guidance and a less clean finish compared with dedicated wood drills; however it is easier to resharpen and shows less self‑feeding tendency. At which drilling depths is the Twist Drill most commonly used? The Twist Drill is the most used tool for solid drilling. For diameters up to 20 mm and drilling depths up to 100 mm it is commonly employed for through‑holes and general metalwork. What is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to HSS is not always correct. When choosing between the two, assess whether working conditions justify a higher investment in HSSE for your specific applications.

Twist Drill — Type N short, 8.25 mm, 118°, HSS, black (DIN 338) by MetavCUT The Twist Drill by MetavCUT is a short Type N metalworking drill bit designed for stable, precise boreholes in metals and suitable for use in drilling machines and hand drills. MetavCUT Twist Drill Type N for metal drilling 8.25 mm Diameter for precision holes 118° Point angle for fast centring Short execution for high stability Made from HSS per DIN 338 standard Precision and durability for metalworking applications The Twist Drill from MetavCUT combines a 8.25 mm diameter with a 118° tip geometry to deliver reliable entry and clean holes in a variety of metals. Manufactured from HSS (High Speed Steel), this short spiral drill offers a balance of hardness and elasticity, which reduces the risk of breakage when drilling smaller diameters and provides lasting edge retention under repeated loads. Compliance with DIN 338 ensures standardized dimensions and performance, so compatibility with typical chucks and machining fixtures is guaranteed. More stability and better control through a short design A short overall length and reduced protruding length increase stability and minimise wobble, which benefits precision work on tougher materials. The compact form reduces vibration and improves concentricity, making the drill ideal when accuracy matters and when working with portable Drilling Machines or bench-mounted equipment. Users benefit from easier handling, safer operation, and less tendency for the bit to deflect under sideways loads. Practical suitability and recommended uses This Type N Twist Drill is optimised for metalworking tasks: it is appropriate for alloyed and unalloyed steel, cast iron, non-ferrous metals and various plastics. The design supports both stationary Drilling Machines and suitable Hand Drills for robust workshop use. Professionals and advanced hobbyists who require dependable, repeatable results in mechanical, fabrication and maintenance contexts will find this short HSS drill a dependable choice. Material and tip geometry explained for confident selection HSS (High Speed Steel) provides elevated hot hardness and toughness compared with regular carbon steels, meaning the bit holds its edge under the heat generated by high RPM machining. The 118° Point angle favours faster centring and is typically chosen for softer to medium-hard materials; it also reduces thrust in the initial penetration. The Type N normal spiral geometry ensures efficient chip removal and general-purpose performance for metal drilling. For particularly hard alloys or specialised tasks, consider whether a different grade or coating would be advantageous. Choose the MetavCUT Twist Drill for reliable, precise metal drilling — for personalised technical advice or to confirm suitability for your exact application, contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 400825-FDA Diameter: 8.25 mm Point Angle: 118° Spiral Length: 75 mm Overall Length: 117 mm Execution: short Type: Type N Material: HSS Standard: DIN 338 Colour: black For: Drilling Machine (Hand drill) Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and drilling larger diameters in metalwork; its construction allows it to withstand higher loads and to be re-sharpened easily while maintaining performance. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill is suitable for use in a Hand Drill as well as in stationary Drilling Machines, though the short execution particularly improves stability and results when mounted in robust chucks or machine spindles. What are Twist Drills used for? Twist Drills such as this MetavCUT Type N are mainly applied to the machining of high-strength materials and larger bore diameters; their geometry makes them easy to re-grind and capable of withstanding substantial loads during metal drilling. Which three drill types exist? Common categories include Metal drills, Wood drills, and Stone/Concrete drills, where the MetavCUT Twist Drill belongs to the metal drill group. Why are Twist Drills sharpened (pointed)? The sharpening reduces the minor cutting edge at the tip, significantly lowering friction and therefore the required feed force; this also improves initial centring of the MetavCUT Twist Drill in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill can be used in wood, but the MetavCUT Type N metal drill provides less guidance and a less clean finish than a dedicated wood bit; however, it is easier to re-sharpen and shows less self-feeding tendency.

Spiralbohrer – MetavCUT HSS, 8,2 mm, 118°, Typ N, kurz, schwarz, DIN 338 Der Spiralbohrer ist ein kurzer HSS-Bohrer nach DIN 338, entwickelt für präzise Metallbohrungen mit 8,2 mm Durchmesser und Einsatz an Handbohrmaschinen. Kurze Ausführung für hohe Stabilität beim Bohren HSS für Stahl, Gusseisen und Nichteisenmetalle Typ N Normalspirale, ideal für Metallbearbeitung Spitzenwinkel 118° für sichere Zentrierung und Anbohrung DIN 338 konform und passend für Handbohrmaschine HSS-Material für vielseitige Metallbearbeitung mit Robustheit Der Einsatz von HSS (High Speed Steel) macht den Bohrer widerstandsfähig gegenüber thermischer Belastung und eignet ihn für die Bearbeitung von legierten und unlegierten Stählen, Gusseisen, Nichteisenmetallen und Kunststoffen. Durch die Materialwahl wird eine gute Schnittfestigkeit erreicht, wodurch saubere Bohrbilder und gleichmäßige Spanabfuhr unterstützt werden. Diese Materialeigenschaft sorgt für Verlässlichkeit bei typischen Werkstatt- und Montagearbeiten. Perfekt für den Standard-Bereich: Einsatzempfehlung und Praxisnutzen Mit einem Durchmesser von 8,2 mm gehört der Bohrer in den Standard-Bereich (2,0–13,0 mm) und ist für den Alltagsgebrauch in Werkstatt, Montage und DIY bestens geeignet. Die Kombina­tion aus Typ N und kurzem Aufbau ermöglicht direktes Bohren in dünnen bis mittleren Blechen, Profilen und Flachstählen. Für besonders exakte Passungen empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, damit das Wandern auf der Oberfläche minimiert wird und das Ergebnis präzise bleibt. Kurze Ausführung, Maße und Bohrtechnische Hinweise für mehr Effizienz Die kurze Bauform verbessert die Stabilität durch geringe Auskraglänge; die Spirallänge 75 mm und Gesamtlänge 117 mm reduzieren Vibrationen und minimieren Verformung beim Vorschub. Der Spitzenwinkel 118° erleichtert das Anbohren und sorgt für gute Zentrierung bei vielen Metallen; bei sehr harten Werkstoffen kann ein größerer Winkel vorteilhaft sein. Für saubere Ergebnisse empfiehlt sich passende Drehzahl, regelmäßige Kühlung oder Schmierung und ordentliche Spannmittel am Bohrfutter. Für präzise Metallbohrungen empfehlen wir den MetavCUT Spiralbohrer in Kurz-Ausführung; bei Unsicherheit oder für technische Rückfragen steht METAV Werkzeuge per E‑Mail unter info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 zur Verfügung Technische Daten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40082-FDA Durchmesser: 8,2 mm Material: HSS Norm: DIN 338 Typ: Typ N Ausführung: kurz Farbe: schwarz Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 118° Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (HSS Spiralbohrer) ist grundsätzlich für viele Metalle geeignet; bei sehr hartem Edelstahl kann jedoch ein Bohrer mit größerem Spitzenwinkel oder spezieller Beschichtung vorteilhafter sein, um längere Standzeiten zu erreichen. Kann ich den MetavCUT Spiralbohrer in meiner Handbohrmaschine verwenden? Der MetavCUT Spiralbohrer (Kurz-Ausführung, Typ N) ist für den Einsatz an Handbohrmaschinen ausgelegt und eignet sich besonders für dünne bis mittlere Bleche sowie allgemeine Werkstattarbeiten. Welche Vorteile bietet die kurze Ausführung des Spiralbohrers von MetavCUT? Die kurze Bauform des MetavCUT Spiralbohrers reduziert das Auslenken und sorgt für erhöhte Stabilität und präzisere Bohrbilder, besonders bei stationären und handgeführten Anwendungen. Wie sollte ich den MetavCUT Spiralbohrer pflegen, um die Lebensdauer zu erhöhen? Für eine längere Standzeit des MetavCUT Spiralbohrers empfiehlt sich das Bohren mit geeigneter Drehzahl, Verwendung von Kühlmittel oder Schmierstoff bei Metallbearbeitung und regelmäßiges Nachschleifen oder Austausch bei Verschleiß. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40082-FDA","sku":"40082-FDA","mpn":"40082-FDA","name":"Spiralbohrer 40082-FDA","description":"Kurzer HSS Spiralbohrer nach DIN 338, Durchmesser 8,2 mm, Spitzenwinkel 118°, Typ N Normalspirale, schwarze Oberfläche; geeignet für Metallbohrungen mit Handbohrmaschine; Spirallänge 75 mm, Gesamtlänge 117 mm; robust und stabil für Werkstatt und Montage.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,2 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (HSS Spiralbohrer) ist für viele Metalle geeignet; bei sehr hartem Edelstahl empfiehlt sich jedoch ein Bohrer mit größerem Spitzenwinkel oder spezieller Beschichtung für längere Standzeiten."}},{"@type":"Question","name":"Kann ich den MetavCUT Spiralbohrer in einer Handbohrmaschine verwenden?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer (Kurz-Ausführung, Typ N) ist für den Einsatz an Handbohrmaschinen ausgelegt und eignet sich besonders für dünne bis mittlere Bleche sowie allgemeine Werkstattarbeiten."}},{"@type":"Question","name":"Welche Vorteile bietet die kurze Ausführung des MetavCUT Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Die kurze Bauform des MetavCUT Spiralbohrers reduziert die Auslenkung, erhöht die Stabilität und sorgt für präzisere Bohrbilder, besonders bei handgeführten Anwendungen."}},{"@type":"Question","name":"Welche Werkstoffe lassen sich mit dem MetavCUT Spiralbohrer bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer aus HSS eignet sich für legierte und unlegierte Stähle, Gusseisen, Nichteisenmetalle und Kunststoffe; HSS bietet gute Schnittfestigkeit und thermische Beständigkeit."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/40082-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer nach DIN 338"},{"@type":"Thing","name":"HSS für Metallbearbeitung"},{"@type":"Thing","name":"Kurz-Ausführung für erhöhte Stabilität"}],"mentions":[{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Spirallänge 75 mm"},{"@type":"Thing","name":"Spitzenwinkel 118°"}]}]}

Twist Drill — Type N, 8.3 mm, 118° tip, HSS, short, black, DIN 338 (MetavCUT) The Twist Drill (Type N) is a short HSS drill bit designed for precision metal drilling with Drilling Machines and workshop hand drills. Short HSS construction for greater stability Conforms to DIN 338 for consistent quality 8.3 mm diameter for standard metal drilling 118° tip for improved centring and faster entry Suitable for Drilling Machine and heavy-duty tasks Reliable stability and precision for metalworking The short HSS design and the reduced overhang provide noticeably higher stability when drilling into metal, reducing bending and chatter. As a Type N normal-spiral bit, this tool excels at creating clean, concentric holes in both unalloyed and alloyed steels; the shorter geometry also improves tool life under repeated loading. For workshop environments where repeatable accuracy matters, the compact length and robust construction translate directly into fewer rejected parts and less rework. Material advantages and tip geometry explained Manufactured from High Speed Steel (HSS) and adhering to DIN 338, the drill combines toughness and heat resistance for typical metalworking tasks. The 118° tip offers a balanced entry characteristic that aids centring on curved or slightly uneven surfaces while keeping cutting forces moderate. In practical terms, this means lower risk of walking at the start of a hole and smoother engagement when used with appropriate cutting speeds and lubrication. The short execution also simplifies regrinding and maintenance. Intended use and suitability for professionals Engineered for the demands of metal drilling, the bit is particularly suitable for production and maintenance tasks in workshops and industrial settings. With an effective spiral length of 75 mm and a total length of 117 mm, the geometry is optimised for machining tasks where rigidity is essential. Users such as fabricators, toolroom technicians and mechanical maintenance teams will value the combination of DIN 338 conformity and the roll-formed HSS production method that balances resilience and resharpenability. Choose the MetavCUT Twist Drill Type N for dependable metal drilling performance — for further technical guidance or to confirm suitability for a specific application contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40083-FDA Diameter: 8.3 mm Spiral length: 75 mm Total length: 117 mm Tip angle: 118° Execution: short Type: Type N Material: HSS Standard: DIN 338 Colour: black Suitable for: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is used primarily for drilling metal; it is designed to handle alloyed and unalloyed steels, cast iron, non-ferrous metals and certain plastics when appropriate speeds and coolant are applied. Why are Twist Drills sharpened and what benefit does that bring? The tip sharpening reduces the cross-cutting edge at the point of the Twist Drill, which significantly lowers friction and therefore the required feed force; a properly sharpened tip also improves centring and prolongs effective life during production runs. For what is a Twist Drill mainly applied? A Twist Drill is mainly applied to the machining of high-strength materials and large bore diameters; its form allows relatively easy resharpening and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? Commonly distinguished drill types include metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills category. Can a Twist Drill be used to drill wood? The metal Twist Drill can be used in wood, but guidance and finish are typically inferior to dedicated wood bits; metal bits may have worse guidance and a less clean hole, although they are easier to resharpen and have lower self-feeding tendency. At which drilling depths is the Twist Drill most commonly used? A through-hole (solid material) is commonly made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.

Spiralbohrer HSS, kurz, Typ N, 8,4 mm, 118°, schwarz, DIN 338 von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer für präzise Metallbohrungen und eignet sich besonders für Handbohrmaschine-Einsätze in Werkstatt und Montage. Spiralbohrer HSS nach DIN 338 für Metallbearbeitung kurz-Ausführung für erhöhte Stabilität beim Bohren 8,4 mm Durchmesser und 118° Spitzenwinkel für Präzision Typ N Normalschaft für Handbohrmaschine geeignet Spirallänge 75 mm sorgt für sichere Spanabfuhr Hochleistungsstahl für belastbare Bohrungen und lange Standzeiten Der Einsatz von HSS macht diesen Spiralbohrer widerstandsfähig gegen thermische und mechanische Belastungen bei der Metallbearbeitung. HSS bietet Elastizität und eine gute Zähigkeit, wodurch das Risiko von Bruch bei üblichen Werkstattanwendungen reduziert wird. Die Fertigungsoptionen Rollgewalzt oder Geschliffen sorgen für konstante Geometrie und damit für gleichmäßige Leistungswerte bei Stahl, Gusseisen, Nichteisenmetallen und Kunststoffen. Kurz-Ausführung für mehr Präzision und weniger Vibration Die kurz-Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität während des Bohrens. In Kombination mit der Spirallänge 75 mm wird die Spanabfuhr verbessert, was saubere Bohrbilder und geringere Erwärmung zur Folge hat. Der 118° Spitzenwinkel erleichtert das Anbohren auf gewölbten oder unebenen Oberflächen und trägt zur Zentrierbarkeit und gleichmäßigen Spanbildung bei. Geeignetes Einsatzfeld und Maschinenkompatibilität Als Vertreter des Standard-Bereichs ist dieser Spiralbohrer ideal für Alltagseinsätze in Werkstatt, Montage und DIY-Projekten. Anwendungen umfassen dünne bis mittlere Bleche, Profile und Flachstähle sowie Arbeiten in Aluminium und Kunststoff. Die Konstruktion als Typ N Normalschaft macht ihn kompatibel zu gängigen Handbohrmaschine-Aufnahmen. Für hochpräzise Passungen empfiehlt sich vor dem Bohren ein Anpunktieren oder Zentrieren. Praktische Hinweise für sicheres und wirtschaftliches Bohren Verwenden Sie geeignete Schnittgeschwindigkeiten und bei Bedarf Kühlschmierstoffe, um Standzeit und Bohrbild zu optimieren. Vermeiden Sie extrem tiefe Bohrungen über das Fünffache des Durchmessers ohne spezielle Spanabfuhrstrategien. Bei ungewöhnlichen Werkstücken oder Serienaufträgen bietet sich das Vorbohren an, um die Querschneide zu entlasten und die Maßhaltigkeit zu sichern. Für präzise Metallbohrungen empfiehlt MetavCUT diesen Spiralbohrer HSS kurz Typ N mit 8,4 mm und 118° Spitzenwinkel; bei Fragen und Beratung steht METAV Werkzeuge gerne zur Verfügung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40084-FDA Material: HSS Norm: DIN 338 Typ: Typ N Ausführung: kurz Durchmesser: 8,4 mm Spitzenwinkel: 118° Gesamtlänge: 117 mm Spirallänge: 75 mm Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie eignet sich der Spiralbohrer MetavCUT HSS Typ N für unterschiedliche Metallarten? Der Spiralbohrer von MetavCUT in HSS-Ausführung ist ausgelegt für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; durch die Materialwahl bleibt die Zähigkeit erhalten und ermöglicht zuverlässige Bohrungen in diesen Werkstoffen. Kann der Spiralbohrer MetavCUT HSS Typ N mit einer Handbohrmaschine genutzt werden? Ja, der Spiralbohrer MetavCUT mit Typ N Normalschaft ist für die Verwendung in Handbohrmaschine konzipiert und bietet in der kurz-Ausführung eine verbesserte Stabilität für handgeführte Anwendungen. Welche Vorteile bringt der 118° Spitzenwinkel beim Spiralbohrer MetavCUT HSS Typ N? Der 118° Spitzenwinkel des Spiralbohrers MetavCUT erleichtert das Anbohren und unterstützt eine gleichmäßige Spanbildung, was insbesondere bei gewölbten oder leicht unebenen Flächen zu präziseren Ergebnissen führt. Wie kann die Standzeit des Spiralbohrers MetavCUT HSS Typ N verlängert werden? Um die Standzeit des Spiralbohrers MetavCUT zu erhöhen, sollten passende Schnittgeschwindigkeiten, gegebenenfalls Kühlschmierstoffe und bei hohen Anforderungen das Vorbohren bzw. punktgenaues Zentrieren eingesetzt werden; regelmäßige Kontrolle von Bohrbild und Spanabfuhr trägt zusätzlich zur Wirtschaftlichkeit bei. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40084-FDA","sku":"40084-FDA","mpn":"40084-FDA","name":"Spiralbohrer 40084-FDA","description":"Spiralbohrer HSS kurz Typ N, 8,4 mm Durchmesser, 118° Spitzenwinkel, schwarze Oberfläche, DIN 338; Kurz-Ausführung für höhere Stabilität und verbesserte Spanabfuhr; geeignet für Handbohrmaschine und Metallbearbeitung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,4 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Metallarten eignet sich der Spiralbohrer MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT HSS Typ N eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe und bietet durch HSS hohe Zähigkeit und Belastbarkeit."}},{"@type":"Question","name":"Kann der Spiralbohrer MetavCUT HSS Typ N in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT HSS Typ N ist mit Normalschaft ausgeführt und für den Einsatz in Handbohrmaschine geeignet; die kurz-Ausführung erhöht dabei die Stabilität."}},{"@type":"Question","name":"Welche Vorteile hat der 118° Spitzenwinkel beim Spiralbohrer MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Der 118° Spitzenwinkel erleichtert das Anbohren, verbessert die Zentrierbarkeit und fördert eine gleichmäßige Spanbildung, besonders bei gewölbten oder leicht unebenen Oberflächen."}},{"@type":"Question","name":"Wie verlängert man die Standzeit des Spiralbohrers MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Zur Verlängerung der Standzeit des Spiralbohrers MetavCUT HSS Typ N werden passende Schnittgeschwindigkeiten, gegebenenfalls Kühlschmierstoffe und Vorbohren bzw. punktgenaues Zentrieren empfohlen; regelmäßige Kontrolle von Bohrbild und Spanabfuhr hilft zusätzlich."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS kurz"},{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"DIN 338 Norm"}],"mentions":[{"@type":"Thing","name":"Typ N Normalschaft"},{"@type":"Thing","name":"Spirallänge 75 mm"},{"@type":"Thing","name":"Kurz-Ausführung für Stabilität"}]}]}

Twist Drill — Type N short HSS drill, 8.5 mm, 118° tip, black, DIN 338, MetavCUT The Twist Drill Type N short HSS metal drill is a compact, precision tool for drilling in a wide range of metals using a standard drilling machine. Short design for higher stability HSS material — resilient for metal drilling 8.5 mm diameter suitable for metalwork 118° tip for reliable centring DIN 338 conformity for consistent quality Durable HSS construction for demanding metalwork The Twist Drill combines a HSS (High Speed Steel) body with a short overall length to deliver improved rigidity and reduced vibration when working on metal. The DIN 338 specification ensures the drill meets standardized dimensions and tolerances for short twist drills with a cylindrical shank, which supports consistent clamping and repeatable results. This construction improves tool life under frequent use and stabilises the drilling process for precise holes in alloyed and unalloyed steel, cast iron and non‑ferrous metals. Reliable cutting geometry for accurate starts A 118° tip angle and the Type N normal spiral geometry make this drill particularly effective at centring and initial penetration in softer and medium‑hard metals. The design reduces the tendency to wander at the start of a hole while maintaining efficient chip evacuation. For users this means fewer re‑starts, cleaner hole edges and improved dimensional accuracy when used in a suitable drilling machine or handheld drilling machine designed for metalwork. Short length for improved precision and tool life The short execution reduces overhang from the chuck and significantly lowers the risk of deflection during drilling. This results in better concentricity and less workpiece damage when machining close tolerances. For workshop environments where repeatability matters, the compact short format offers a practical balance between reach and stiffness, making it well suited for fixture work, small components and repair tasks where a standard long drill would bend or chatter. Practical guidance and safe use When using this Type N Twist Drill, select appropriate cutting speed and cooling for the metal being machined and secure the workpiece firmly. Re‑sharpening is straightforward thanks to the classic geometry; proper resharpening maintains the reduced cross‑edge and keeps the drill centred. If unsure about optimum speeds or feed for a specific alloy, METAV Werkzeuge provides expert advice and technical support to help choose the right operating parameters and accessories for the task. Strong recommendation: For precise, reliable metal drilling choose the MetavCUT Twist Drill Type N short HSS with DIN 338 specification — METAV Werkzeuge offers professional consultation and personalised technical support via e‑mail, phone or WhatsApp to ensure the tool meets the project requirements Are you unsure whether this drill matches your needs or require additional technical data? METAV Werkzeuge is happy to advise 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40085-FDA Diameter: 8.5 mm Tip angle: 118° Type: Type N Execution: short Spiral length: 75 mm Overall length: 117 mm Material: HSS Application: Drills for metal For drill machine: Drilling Machine / Handheld Drilling Machine Colour: black Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N be used on? The MetavCUT Twist Drill Type N is designed primarily for metalworking and is suitable for alloyed and unalloyed Steel, Cast Iron and many Non‑Ferrous Metals; it also performs on certain Plastics when appropriate speeds and feeds are used. Is the MetavCUT Twist Drill compatible with handheld drilling machines? Yes, the MetavCUT Twist Drill Type N with a cylindrical shank can be used in handheld Drilling Machines; ensure secure clamping, correct speed and steady feed to avoid runout and to maintain hole quality. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength materials and larger bore diameters. It is easy to re‑grind and withstands higher loads, making it suitable for demanding metal drilling tasks. Which 3 drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip, which lowers friction and the required feed forces; sharpening also improves centring of the drill in the workpiece, leading to cleaner, more accurate holes. Can a Twist Drill be used to drill wood? A Metal Drill such as this Twist Drill can be used in Wood, but guidance and finish are generally inferior compared to wood‑specific drills. Metal drills are easier to re‑sharpen and have less self‑pulling action. At which drilling depths is the Twist Drill the most used tool? For solid drilling, the Twist Drill is the most common choice. It is widely used for diameters up to 20 mm and drilling depths up to 100 mm, providing an efficient method for bore production in solid workpieces.

Twist Drill — Type N, short HSS, Ø 8.6 mm, 118° tip, black, DIN 338 — MetavCUT The Twist Drill Type N short HSS is designed for precise metal drilling in hand and drilling machines, offering stability and clean starts for workshop and industrial use. Short HSS design for high stability Ø 8.6 mm for medium-diameter holes 118° tip for reliable centring on curved surfaces Type N normal spiral for metal drilling Conforms to DIN 338 for short twist drills Reliable HSS performance for demanding metalwork Manufactured from HSS (High Speed Steel), this Twist Drill targets the drilling of alloyed and unalloyed steel, cast iron and non‑ferrous Metals. The material choice provides a balanced combination of hardness and toughness, which supports sustained cutting performance under load. As a result, workshops benefit from consistent hole quality and extended tool life when processing common engineering materials. Short execution and Type N spiral for precision and stability The short design specified by DIN 338 reduces overhang and increases rigidity compared with longer variants, which minimises deflection and improves concentricity when drilling from chucks. The Type N normal spiral geometry is the classic solution for metal drilling, offering predictable chip evacuation and stable cutting behaviour in stationary and portable Drilling Machines. This leads to noticeably better guidance and fewer rejects in precision tasks. 118° tip for better centring and smoother starts A 118° tip provides a favourable compromise between easy centring and fast penetration for many common metals; the geometry supports accurate positioning even on slightly curved surfaces. Tip sharpening (outpointing) reduces the cross‑cutting edge width, which lowers friction and reduces necessary feed forces, improving centring and resulting hole finish. For operators this means quicker set‑up and fewer re‑drills while maintaining a clean bore. Practical advantages for workshops and maintenance teams The combination of HSS construction, short overall length and Type N spiral makes this Twist Drill particularly suitable for mechanical workshops, tool rooms and maintenance teams requiring reliable medium‑diameter holes. The geometry is also straightforward to resharpen, so machines with frequent use benefit from a tool that can be economically maintained. Its black finish improves visibility of wear and handling in busy production environments. Strong recommendation: Choose the MetavCUT Twist Drill Type N (Ø 8.6 mm, short HSS) for robust, precise metal drilling — for expert advice contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 40086-FDA Type: Type N Diameter: 8.6 mm Tip angle: 118° Spiral length: 81 mm Overall length: 125 mm Material: HSS Execution: short Colour: black Suitable for: Drilling Machine / Hand Drill Application: Drills for metal Norm: DIN 338 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N from MetavCUT used for? The MetavCUT Twist Drill Type N is primarily used for drilling in metal; its short HSS construction and normal spiral make it suitable for precise holes in Alloyed and Unalloyed Steel, Cast Iron and Non‑Ferrous Metals in both workshop and maintenance environments. Can the MetavCUT Twist Drill be used with a hand drill or drilling machine? Yes, the MetavCUT Twist Drill Type N is designed for use in Drilling Machines and can also be employed with Hand Drills, though the short execution particularly benefits stationary setups where rigidity and concentricity are crucial. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high‑strength materials and larger drill diameters; its form is easy to grind and it withstands elevated loads, making it suitable for robust metalworking tasks. Which three drill types exist? The three common drill types are: Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills sharpened (outpointed)? Sharpening reduces the cross‑cutting edge at the tip of the Twist Drill, which significantly lowers friction forces and thus requires less feed force; at the same time the tip centres better in the workpiece, improving accuracy. Can a metal Twist Drill be used to drill wood? A metal (HSS) Twist Drill can be used in wood but it generally provides poorer guidance and a less clean finish compared with dedicated wood drills; however, metal drills are easier to resharpen and show less self‑feeding behaviour.

Twist Drill — Type N, 8.75 mm, 118° point angle, short HSS, black, DIN 338 A Twist Drill Type N designed for precise metal drilling in drilling machines and hand drills. HSS short Twist Drill, DIN 338 compliant 8.75 mm Diameter with 118° point angle 125 mm Overall length for stable handling Type N normal spiral optimized for metal Black finish for improved surface protection Precision and durability for demanding metalworking This short HSS Twist Drill combines material toughness with a compact design to deliver reliable performance in metal applications. The HSS material provides high wear resistance and good elasticity, making the bit suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. The short design reduces overhang and therefore vibration, which results in precise holes and a lower tendency to wander during drilling. Stability and handling that improve machining accuracy The reduced exposed length and 125 mm overall length increase stiffness and control when using a drilling machine or hand drill. The 81 mm flute length evacuates chips efficiently while maintaining rigidity, enabling consistent results in moderate deep holes. This combination supports clean hole geometry and repeatable centering, which is particularly important for workshop and maintenance tasks. Designed to the DIN 338 short‑drill standard for industrial use Manufactured to DIN 338, this short Twist Drill meets common shop standards for short spiral drills with cylindrical shank. The Type N normal spiral offers a reliable helix geometry for metal cutting, while the 118° point angle supports good centering behavior and is versatile across many metal types. For harder materials such as stainless steel, a steeper angle may be preferred, but the 118° point here balances penetration and chip formation for broad use. Practical guidance and safe working tips When working with this Twist Drill in metal, use appropriate spindle speeds and cutting fluid to extend tool life and improve surface finish. Start with lower speeds for larger diameters and increase coolant flow for heat management. Because the bit is a short version, it is less prone to bending — a benefit when precision is required. For occasional sharpening, the normal spiral geometry of this bit allows easier regrinding while retaining performance. Strong recommendation: the MetavCUT Twist Drill Type N is ideal for precision metal drilling — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 400875-FDA Diameter: 8.75 mm Point angle: 118° Type: Type N Execution: short Material: HSS (High Speed Steel) Flute length: 81 mm Overall length: 125 mm Colour: black For drill: Drilling Machine / Hand Drill Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended for metalworking and is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics; its HSS composition provides the hardness and elasticity needed for these materials. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; its shape allows comparatively easy resharpening and it withstands higher loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills, each designed with geometries and materials adapted to their specific applications.

Twist Drill Type N — 8.7 mm, 118° tip, short, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N is a short High Speed Steel drill bit designed for precise metal drilling with hand or drilling machines. Short design for increased stability and precision HSS material for metalworking durability 8.7 mm diameter for standard metal holes 118° tip angle for reliable centring Conforms to DIN 338 short twist drill specification Reliable rigidity for precision metalworking A short HSS twist drill with a Type N spiral offers clear benefits where accuracy matters. The reduced overhang and the 81 mm spiral length together with an overall length of 125 mm reduce deflection and vibration during drilling, resulting in cleaner holes and longer tool life. This geometry is particularly advantageous for workshop and maintenance tasks where repeatable hole quality is required. The roll-formed or ground cutting edges deliver consistent cutting behaviour across common ferrous and non-ferrous metals. Standardised design that supports consistent results Compliance with DIN 338 identifies this bit as a short twist drill with a cylindrical shank, engineered for machine and hand-tool use. The short format increases stability and makes the tool less prone to bending under load, which benefits precision fitting and assembly processes. Users benefit from predictable tool behaviour and easier tool handling when switching between similar machines, while manufacturers achieve repeatable hole tolerances as required in many metalworking applications. Practical compatibility and drilling behaviour The 118° tip angle helps the drill centre reliably on slightly contoured surfaces and reduces the tendency to wander during the initial contact. As a Type N bit, it is the classic geometry for metal drilling and is suited for alloyed and unalloyed steels, cast iron and many non-ferrous metals. The cylindrical shank enables secure clamping in standard chucks of both hand and drilling machines, and the short construction aids chip evacuation and cooling when used with appropriate cutting fluids. Who gains most from this short HSS bit Metalworkers, toolroom technicians and maintenance engineers will appreciate the combination of HSS toughness and the short format for tasks that require repeatable precision. The design reduces the risk of breakage during moderate feeds and supports efficient workshop workflows. Produced by MetavCUT, this bit is a reliable choice for industrial repairs, prototype shops and technical training environments where durability and consistent drilling performance are essential. We recommend the MetavCUT Type N short Twist Drill for precision metalwork — for personalised technical advice and application support please contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40087-FDA Diameter: 8.7 mm Tip angle: 118° Spiral length: 81 mm Overall length: 125 mm Execution: short Type: Type N Material: HSS (High Speed Steel) Colour: Black Suitable for: Hand Drill / Drilling Machine Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is primarily used for machining metal; it performs well on alloyed and unalloyed steels, cast iron and many non-ferrous metals where a short, stable drill is required for precise holes. Can the MetavCUT Twist Drill Type N be used with a hand drill? Yes, the MetavCUT Twist Drill Type N is suitable for both hand drills and machine drilling when clamped securely; its short form reduces bending and improves accuracy in handheld applications. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high-strength materials and larger drill diameters. This shape is easy to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are there? The main categories are Metal drills, Wood drills and Stone/Concrete drills. Why are twist drills pointed? Pointing reduces the chisel edge at the tip, lowering friction and therefore requiring less feed force; it also improves centring of the drill tip in the workpiece. Can a twist drill be used to drill wood? A metal twist drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; metal bits are easier to re-sharpen and have less aggressive self-feed.

Twist Drill — Type N short HSS drill, 8.8 mm, 118°, black, DIN 338 The Twist Drill is a short Type N HSS drill designed for precise metal drilling in workshop and industrial settings. Short HSS Type N for high stability 8.8 mm Diameter for precise metal holes 118° Point Angle for improved centring DIN 338 short design reduces bending Black finish for clear visibility in the chuck Short design that boosts stability and accuracy A short design according to DIN 338 reduces the unsupported length of the tool, which directly improves rigidity and lowers the risk of bending during drilling. This construction leads to more precise holes and longer tool life when working on metal parts. For tasks requiring tight tolerances, the compact geometry is particularly advantageous because it minimises vibration and preserves concentricity even under handheld or machine-fed conditions. High-speed steel core for reliable cutting performance Manufactured from HSS (High Speed Steel), the drill offers a balanced combination of toughness and heat resistance suitable for common metalworking tasks. HSS is easy to re-sharpen and maintains cutting performance on alloyed and unalloyed steels, cast iron, non-ferrous metals and many plastics. This material choice reduces the likelihood of breakage in smaller diameters and supports repeated sharpening during maintenance, making it a durable option for everyday workshop use. Optimised tip geometry for centring and chip evacuation The 118° point angle and classic Type N helix create a reliable starting behaviour on flat and slightly curved surfaces, improving initial centring without excessive walking. The standard flute geometry facilitates efficient chip removal while drilling through metal, which helps maintain cutting edges and reduces heat build-up. These features together make the drill particularly well suited to metalworking tasks that demand a clean entry and consistent hole quality. Designed for compatibility and straightforward handling With a diameter of 8.8 mm, a spiral length of 81 mm and a total length of 125 mm, this short HSS drill is compatible with a wide range of drilling machines and hand-held drills used in workshops. The Type N helix is the classic choice for metal drilling and pairs well with standard chucks. The black finish aids visibility in the chuck and protects surfaces during storage. Handling is simplified by the reduced overhang, which also contributes to safer operation and easier regrinding when required. Strong recommendation: For consistent results in metalworking choose the MetavCUT short HSS Twist Drill — technical advice and fitting support are available from METAV Werkzeuge; for personalised guidance email info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Key specifications for reliable workshop use Designation: Twist Drill Brand: MetavCUT SKU: 40088-FDA Type: Type N Diameter: 8.8 mm Point Angle: 118° Material: HSS (High Speed Steel) Execution: short Colour: black Spiral Length: 81 mm Total Length: 125 mm Application: Drills for metal Recommended machine: Drilling Machine / Hand Drill compatible Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the typical use of the Twist Drill from MetavCUT (Type N)? The MetavCUT Twist Drill Type N is primarily used for drilling in high-strength materials and for larger hole diameters in metals; its robust roll-rolled HSS construction makes it suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics, while offering good resistance to breakage and straightforward re-sharpening. Which three drill types are commonly available? Common drill categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for steel and similar materials. Why are Twist Drills dressed (pointed)? Dressing the tip reduces the cross-cut at the peak of the Twist Drill, which significantly lowers friction so that less feed force is required; at the same time the dressed tip improves centring and reduces walking when starting the hole. Can the MetavCUT Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with a dedicated wood bit; the metal drill offers easier re-sharpening and less aggressive self-feeding, which may affect hole cleanliness. For which drilling depths is the Twist Drill most commonly used? The Twist Drill is typically used for through drilling where a cylindrical hole is produced by material removal; it is most common for diameters up to 20 mm and drilling depths up to around 100 mm, depending on the machine and setup. Is HSS better than HSSE? The general belief that HSSE steels are categorically superior to HSS is not always correct; the choice between HSS and HSSE should depend on actual working conditions, as HSSE may justify its higher cost only under specific demands.

Twist Drill — Type N short HSS Ø 8.9 mm, 118° tip, black, DIN 338, short design The Twist Drill Type N short HSS is a metalworking bit designed for precise drilling in metals with hand drills and drilling machines, offering a stable short shank and a 118° tip for efficient penetration. Short design for increased stability HSS construction for reliable metal drilling 118° tip for easier penetration in softer metals DIN 338 standard for short twist drills Compatible with hand drills and drilling machines Precision and stability for demanding metalwork The short Type N geometry delivers high stability and reduced run-out during operation, which directly benefits hole accuracy. With a Ø 8.9 mm cutting diameter and a total length of 125 mm, this short twist drill minimises bending and chatter when used in both portable and benchtop drilling equipment. The compact spiral length of 81 mm concentrates rigidity where it matters, enabling consistent hole diameter and a cleaner finish even under higher cutting loads. Durable HSS material for extended tool life Made from HSS (High Speed Steel), the bit combines hardness and toughness for prolonged service life in a wide range of metals. The material choice supports drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, while still allowing straightforward resharpening when required. For users this means fewer tool changes, predictable wear behaviour and reliable performance in routine workshop and maintenance tasks. Practical use cases and who benefits most Designed for professional workshops, maintenance teams and skilled hobbyists, the MetavCUT short twist drill is ideal where precision and repeatability are required. The Type N spiral is optimised for metallic materials, and the black finish improves visibility during setup. If you are unsure whether the bit suits a specific machine or material, METAV Werkzeuge offers detailed advice and technical support — contact via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Standards, tip geometry and application guidance Conforming to DIN 338 as a short twist drill ensures consistent dimensions and manufacturing quality across batches. The 118° tip angle favours entry and centring in softer metals and related tasks, while the classic Type N flute geometry balances chip evacuation and cutting action. For harder stainless steels or very abrasive materials, consider a flatter tip angle or a coated variant; for standard steel work, this short HSS bit provides an effective combination of penetration and rigidity. Strong recommendation: Opt for the MetavCUT Twist Drill Type N short HSS for precise metal drilling — expert consultation and ordering support are available from METAV Werkzeuge at info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40089-FDA Diameter: 8.9 mm Tip angle: 118° Spiral length: 81 mm Total length: 125 mm Type: Type N Material: HSS Execution: short Colour: black Suitable for: Drilling Machine / Hand drills Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill are primarily used for machining high-strength materials and larger drill diameters; their form is easy to resharpen and they withstand considerable loads, making them suitable for demanding metalworking tasks. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills group and is designed accordingly. Why are twist drills tipped? The tip sharpening reduces the cross-cut at the drill point, which lowers friction and therefore reduces the required feed force; this also improves centring of the MetavCUT Twist Drill during the initial entry into the workpiece. Can a Twist Drill be used to drill wood? A metal drill like the MetavCUT Twist Drill can be used in wood, but guidance and finish are usually inferior compared with a dedicated wood bit; metal drills are easier to resharpen and show less self-feed, which can be an advantage in some manual operations.