Reliable drilling performance with Standard Line twist drill
Standard Line twist drill and standard drills deliver consistent, precision holemaking for daily industrial and workshop use, combining durable high-speed steel construction with precision-ground flutes to ensure excellent runout and chip evacuation. Designed for machining unalloyed and low-alloy steel, cast iron, sintered metal, plastics and non-ferrous metals, these drills provide a balanced mix of wear resistance and hole quality for routine production and maintenance tasks. Ideal for workshops, maintenance departments and assembly plants, the system offers a dependable, cost-effective solution between entry-level and heavy-duty ranges, featuring an optimised 118° point for good penetration and centring. Key advantages include precision-ground construction, excellent chip evacuation and consistent hole quality.
3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G Drill for Metal, Ø 3 mm, 135° Point Angle, Bright Finished The Twist Drill is an extra‑long HSS‑G drill designed for deep, precise metal drilling with a 3 mm Diameter and a 135° Point Angle, suitable for use in a Drilling Machine or Hand Drill. Extra‑long design for deep hole access CNC ground flutes for precise hole quality HSS‑G material for high strength and wear resistance 135° Point Angle for harder materials like Stainless Steel Fully ground shank for accurate centring and low runout Deep reach and reliable hole quality for demanding metalwork The extra‑long geometry with a Total Length of 150 mm and a Spiral Length of 100 mm enables access to deep or hard‑to‑reach bore locations where standard drills fail. Thanks to the HSS‑G ground construction and DIN 1869 specification, the drill produces clean, accurate holes in metal components. This design reduces the need for extension tooling and keeps setups simpler, so drilling operations remain efficient even in confined assemblies. Faster cutting with lower feed force on tough materials A CNC‑ground flute geometry delivers a sharper cutting edge and higher concentricity compared with rolled variants, enabling up to 40% faster drilling and about 50% less required feed force under comparable conditions. The 135° Point Angle is optimised for harder materials, shortening the initial entry time and improving centring when starting a bore in materials such as alloyed steel, grey cast iron and sintered parts. Use with appropriate coolant to maximise tool life. Compatibility, handling and practical machining tips The bright finished surface and fully ground shank ensure stable clamping in standard drill chucks and machine spindles. For best results with the Twist Drill, select moderate cutting speeds for small diameters in high‑strength steels, apply steady coolant or lubricant, and avoid abrupt lateral loads to reduce breakage risk. The tool is suited for both stationary machine use and robust portable drilling where deep bores are required. Who benefits most from this twist drill Metalworkers, maintenance technicians and toolroom specialists who perform precision deep drilling will value the combination of extra‑long reach and HSS‑G edge performance. The drill is particularly helpful when producing through‑holes or deep blind holes in alloyed and unalloyed steels, cast materials and hard plastics where surface finish and dimensional accuracy are priorities. Choose the MetavCUT extra‑long Twist Drill for demanding deep metal drilling — for personalised technical advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 32030-FDA Diameter: 3 mm Total Length: 150 mm Spiral Length: 100 mm Point Angle: 135° Execution: extra long Colour / Finish: Bright finished Shank Execution: Fully ground Material: HSS‑G Standard: DIN 1869 Intended Use: Drills for metal / Drill for Metal Suitable for: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger bore diameters; it is especially suited to deep holes and applications requiring a drill that can be resharpened. Its ground geometry makes it robust for Alloyed and Unalloyed Steel, Cast Steel, Grey Cast Iron, Sintered Iron and Hard Plastics while maintaining good hole quality. Which three drill types exist? There are three main drill categories commonly used: Metal drills (such as the MetavCUT Twist Drill), Wood drills, and Stone/Concrete drills designed for masonry work. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the drill tip and lowers friction; a sharpened point significantly decreases required feed forces and improves centring accuracy when beginning a bore. Can a metal drill be used to drill wood? A metal drill like the MetavCUT Twist Drill can be used in wood, but it typically offers poorer guidance and a less clean finish compared with a dedicated wood drill. Metal drills are easier to resharpen and tend to have lower self‑feeding characteristics. At what bore depths is the Twist Drill most commonly used? A Twist Drill is often used for solid drilling where a cylindrical hole is produced by cutting. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill remains the most frequently applied tool. What is better, HSS or HSSE? The common assumption that HSSE steels are categorically superior to conventional HSS is not universally correct. Decide based on specific working conditions and whether the performance benefits justify a higher purchase cost.
3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — HSS‑G extra long, 3 mm, 135° tip, bright finished, DIN 1869, fully ground by MetavCUT The Twist Drill is an extra‑long HSS‑G bit designed for deep metal drilling and tough materials, offering a 135° tip geometry for improved centring and reduced walking in demanding tasks. Extra‑long design for deep hole drilling 3 mm diameter for precise small holes 135° tip for hard materials like stainless steel Fully ground HSS‑G for high precision Conforms to DIN 1869 for industrial applications Reach deeper holes with stable, reliable performance Built for applications where standard lengths fall short, the extra‑long geometry provides extended reach without frequent tool changes. This extension reduces setup time and increases productivity when machining deep bores. The primary advantage is uninterrupted drilling in assemblies or recessed features, where access is restricted. For best results in stationary or guided setups, cooling and steady feeds are recommended to preserve tool life. Precise cutting and centring for harder materials The 135° tip is optimised for harder materials and reduces tendency to wander at the start of a hole. A single clear benefit is faster penetration with improved centring on metals such as alloyed steel or cast iron. The sharpened geometry means lower axial force during entry, which helps maintain hole position and reduces the risk of workpiece damage when compared with more acute tip angles. Ground flutes (HSS‑G) for accuracy and clean holes A fully ground HSS‑G blank delivers superior roundness and surface finish thanks to CNC grinding of the flutes and cutting lips. This manufacturing method creates very sharp edges and tight tolerances, producing clean, burr‑reduced holes in metal. For operators unfamiliar with the term: "fully ground" means the flute geometry is created by precision grinding rather than rolling, yielding higher dimensional accuracy at the cost of slightly greater brittleness. Designed to meet industrial standards and common machine types Conforming to DIN 1869, this bit is specified for intensive use and deep drilling conditions. It is suitable for use in a Drilling Machine and for machining a range of metals, including unalloyed and alloyed steels up to the specified limits. The combination of a 3 mm diameter and a 180 mm overall length with a 120 mm spiral provides a practical solution where deep, narrow bores are required while maintaining guidance and hole quality. MetavCUT’s extra‑long HSS‑G Twist Drill is recommended for professional metalworking where depth and precision matter — for application advice or to confirm suitability for your project contact METAV Werkzeuge: info@metav-werkzeuge.com • Phone +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 33030-FDA Diameter: 3 mm Tip angle: 135° Execution: extra long Finish: bright finished Shaft execution: fully ground Spiral length: 120 mm Overall length: 180 mm Material: HSS‑G Standard: DIN 1869 For: Drilling Machine Model series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill and which materials does it suit? The MetavCUT Twist Drill is primarily designed for machining high‑strength materials and larger drill diameters; it excels in deep‑hole metalworking and maintains performance in alloyed and unalloyed steels, cast iron and non‑ferrous metals. Which three main drill types exist? The three common drill types are metal drills, wood drills, and masonry/concrete drills, each optimised for different materials and cutting conditions; the MetavCUT Twist Drill belongs to the metal drill category. Why are Twist Drills sharpened (re‑pointed)? Re‑pointing reduces the cross‑cut at the tip, which lowers friction and requires less feed force; this sharpening improves centring and cutting efficiency for the MetavCUT Twist Drill and prolongs effective performance. Can a metal Twist Drill be used for wood? A metal drill can be used in wood, but the MetavCUT Twist Drill will typically offer poorer guidance and a less clean finish than a dedicated wood bit; however, it is easier to resharpen and has reduced self‑feeding characteristics.
3mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
MetavCUT Twist Drill — 3 mm, 135° point angle, extra long, bright finished, fully ground, HSS‑G, DIN 1869 the MetavCUT Twist Drill is a high‑precision drilling tool designed for deep metal drilling with hand drills and drilling machines, offering extra length and a 135° point for reliable centring and efficient penetration. Extra‑long design for deep holes Fully ground HSS‑G for precise, clean bores 135° point angle for harder materials Bright finished surface for corrosion resistance Optimised geometry for use in drilling machines Engineered for accurate metal drilling and durable results The HSS‑G material and DIN 1869 conformity ensure the bit is suited for demanding metalworking tasks. The fully ground flute geometry produces sharp cutting edges and a high runout accuracy, which results in cleaner bores and consistent hole dimensions. This construction is particularly advantageous when drilling alloyed and unalloyed steels, cast iron and non‑ferrous metals, because it minimises deformation at the hole edge and supports repeatable results in production or repair work. Extra length for hard‑to‑reach and deep holes With a total length of 240 mm and a spiral (working) length of 160 mm, the extra long execution enables access where standard bits cannot reach. This makes the tool ideal for deep‑hole operations and applications where the workpiece geometry or fixturing places the drill axis far from the operator. The bright finished surface helps reduce corrosion risk during storage and handling and supports smoother chip evacuation in deeper bores. Faster drilling with lower feed force — practical benefits The fully ground HSS geometry offers significant performance advantages: it can drill up to 40% faster and requires approx. 50% less feed force compared with conventional HSS bits of rolled geometry. The 135° point angle reduces initial bite in harder materials and shortens pilot time, improving control and reducing the risk of walking. For best results, use appropriate coolant and, when possible, a stationary setup to mitigate the inherently higher brittleness of ground drills. Recommended applications and user profile This tool is optimised for professional metalworkers, toolrooms and maintenance technicians who need precise, deep holes in steels, cast materials and hard plastics. The bit is suited for use in a Drilling Machine as well as robust hand‑held drills when carefully applied. If in doubt about suitability for a specific alloy or machining parameter, METAV Werkzeuge provides expert consultation to ensure the right selection for the task. Choose MetavCUT’s precision Twist Drill for demanding deep‑hole metalwork — for personalised technical advice and ordering assistance contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 34030-FDA Diameter: 3 mm Point angle: 135° Execution / Type: extra long Colour: bright finished Shaft execution / Shank finish: fully ground Spiral length: 160 mm Total length: 240 mm Material: HSS‑G Standard: DIN 1869 For use in: Drilling Machine (Hand drill compatibility) Application: Drills for metal Model series: Standard Line Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill mainly used for? The MetavCUT Twist Drill is primarily used for drilling high‑strength materials and larger diameters; it is especially effective for deep holes and tasks where a longer overall length is required, providing reliable performance in alloyed and unalloyed steels as well as cast materials. Which three drill types exist? The three main categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is engineered specifically for metalworking applications.
3mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Kompakter, extra kurzer Spiralbohrer mit HSS‑G-Schneidstoff, 3 mm Durchmesser und 135° Spitzenwinkel bietet erhöhte Stabilität, geringere Bruchneigung und bis zu 40 % schnellere Bohrleistung gegenüber herkömmlichen HSS‑Bohrern; Bestellen Sie das Produkt direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an Spiralbohrer 3 mm extra kurz von MetavCUT Der Spiralbohrer 3 mm in extra kurzer Ausführung eignet sich für präzise Metallbohrungen in engen Räumen und für den Einsatz mit Handbohrmaschine. Extra kurz für höhere Stabilität und weniger Bruchneigung HSS‑G geschliffen: bis zu 40 % schnelleres Bohren Zylinderschaft: universell passend für Dreibackenfutter 135° Spitzenwinkel für harte Werkstoffe Spiralänge 16 mm: ideal für Bleche und Profile Mehr Stabilität durch die extra kurze Bauform Die extra kurz ausgeführte Bauform reduziert Hebelwirkung und Vibrationen und führt so zu deutlich geringerer Bruchanfälligkeit bei kleinen Durchmessern. Dadurch wird das Arbeiten in beengten Bereichen vereinfacht und die Standzeit des Werkzeugs erhöht. Besonders bei dünnwandigen Bauteilen sorgt die kompakte Länge für verbesserte Rundlaufgenauigkeit und verlässliche Bohrlöcher. Schneller und effizienter schneiden mit HSS‑G Der aus HSS‑G gefertigte, geschliffene Bohrer reduziert die Anpresskraft und ermöglicht ein bis zu 40 % schnelleres Bohren gegenüber herkömmlichen HSS‑Ausführungen. Die gesteigerte Schnittfähigkeit führt zu saubereren Bohrbilden und reduziert Nacharbeiten, was Zeit und Kosten in der Werkstatt spart. Für Anwender bedeutet das weniger Ermüdung und höhere Produktivität. Geeignet für typische Metallanwendungen in Werkstatt und Montage Der Bohrer ist für den Standard‑Bereich (2,0 mm–13,0 mm) ausgelegt und damit bestens geeignet für Werkstatt, Montage und DIY‑Projekte. Empfohlenes Einsatzfeld sind dünne bis mittlere Bleche, Profile sowie legierte und unlegierte Stähle, Gusseisen und Nichteisenmetalle. Bei hoher Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um ein Wandern zu vermeiden. Eigenschaften der Spitze und Spirale verständlich erklärt Der 135° Spitzenwinkel sorgt für einen flacheren Ansatz, der das Anbohren in harten Werkstoffen wie Edelstahl erleichtert und die Anbohrzeit verkürzt. Die Normalspirale (Typ N) ist die klassische Spirale für Metall und bietet eine ausgewogene Späneförderung bei üblichen Vorschubwerten. Diese Kombination ermöglicht saubere Bohrungen bei geringem Werkzeugverschleiß. Hinweise zur Schaftausführung und Einspannung Die Zylinderschaft erlaubt die universelle Nutzung in Dreibackenfuttern von Handbohrmaschinen. Das erleichtert schnellen Werkzeugwechsel. Bei höheren Drehmomenten besteht allerdings die Möglichkeit des Durchrutschens; hier empfiehlt sich eine sorgfältige Spannprüfung oder der Einsatz von Spannhülsen bzw. besser geeigneten Schaftformen bei stationären Anwendungen. Praxisempfehlungen für sicheres und effizientes Arbeiten Zum sauberen Arbeiten empfiehlt sich angepasstes Kühlmittel bei zähen Werkstoffen und moderater Vorschub, um Überhitzung zu vermeiden. Für den Durchmesserbereich 2–13 mm kann in vielen Fällen direkt gebohrt werden; bei sehr präzisen Passungen ist Anpunkten sinnvoll. Die kurze Bauform unterstützt gutes Führungsverhalten, reduziert Schwingungen und macht das Bohren in engen Einbausituationen zuverlässig möglich. Nutzen Sie die robuste HSS‑G Kurzbauform von MetavCUT und ergänzen Sie Ihre Werkstattausrüstung mit diesem stabilen 3 mm Bohrer; bei Fragen erreichen Sie unsere Beratung per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 56030-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 1897 Fakten Durchmesser: 3 mm Gesamtlänge: 46 mm Spiralänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (Hochleistungsschnellarbeitsstahl) Ausführung: extra kurz Schaftausführung: Zylinder Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine Farbe: blank Hersteller: MetavCUT Serie: Standard Line FAQ Für welche Materialien eignet sich dieser Bohrer besonders gut? Der MetavCUT Spiralbohrer aus der Standard Line mit HSS‑G eignet sich besonders für legierte und unlegierte Stähle, Gusseisen, Temperguss sowie Nichteisenmetalle; die Kombination aus HSS‑G und 135° Spitzenwinkel gewährleistet gute Anbohr‑ und Zerspanungseigenschaften. Ist der Bohrer für den Einsatz in einer Handbohrmaschine geeignet? Ja, die Ausführung mit Zylinderschaft ist für Dreibackenfutter von Handbohrmaschinen vorgesehen; der Spiralbohrer 3 mm (SKU 56030-FDA) wurde für universelle Einsätze in der Werkstatt konzipiert. Wie vermeide ich ein Durchrutschen im Bohrfutter? Bei der Zylinderschaft auf feste Spannung im Dreibackenfutter achten und gegebenenfalls Spannhülsen oder Alternativen mit 3‑Kant‑Schaft verwenden; zudem sorgt korrektes Anziehen des Futters für sicheren Halt. Brauche ich beim Bohren in Edelstahl einen anderen Spitzenwinkel? Der 135° Spitzenwinkel dieses Bohrers ist speziell für härtere Werkstoffe wie Edelstahl ausgelegt und reduziert das Abheben beim Anbohren; für sehr weiche Werkstoffe sind flachere Winkel schneller, dort ist dieser Typ jedoch nicht optimal. Wie unterscheidet sich die extra kurze Ausführung im Alltag? Die extra kurze Bauform bietet mehr Stabilität und geringere Bruchgefahr bei kleinen Durchmessern; für enge Bauverhältnisse und dünnwandige Bauteile ist sie praxistauglicher und ermöglicht kontrollierteres Bohren.
3mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — MetavCUT HSS‑G Fully Ground Twist Drill, 3 mm, 118°, Hex Shank, Silver, DIN 338 A Twist Drill designed as a Drill for Metal for use in Drilling Machines, delivering precise, fast metal drilling thanks to its fully ground HSS‑G geometry. Fully ground HSS‑G for precise metal drilling 118° point angle for improved centring Hexagonal shank for secure torque transfer DIN 338 classification for short twist drills 30 mm flute, 80 mm overall length for extended reach Precise metalworking with reduced effort This fully ground HSS‑G tool offers a clear productivity advantage when machining metals. The CNC‑ground flute geometry produces sharp cutting edges and a high runout accuracy, so holes are cleaner and dimensional accuracy is improved. Because the cutter is ground rather than rolled, drilling can be up to 40% faster and requires significantly less feed force, which reduces operator effort and lowers tool wear during stationary or machine drilling. Reliable centring and clean hole starts The 118° point angle is chosen for easier centring and controlled penetration in softer to medium materials such as aluminium and many steels. This geometry helps to avoid wandering on curved or uneven surfaces and produces a consistent entry without excessive burr formation. For users who value reproducible starts and neat hole edges, the tip design of this tool contributes directly to a superior finishing result. Secure fastening and fast changeovers A hexagonal shank provides form‑fit torque transmission, minimising slippage in bit holders and quick‑change chucks. This design is particularly advantageous for cordless and impact drivers equipped for metal drilling, as it reduces the need for re‑clamping and speeds up workflow. The combination of hex shank and short‑length design follows the DIN 338 concept for short twist drills, enabling simple handling in both portable and stationary setups. Application profile and best uses Engineered primarily as a Drill for Metal, this tool is suited to alloyed and unalloyed steels, cast materials, sintered iron and many non‑ferrous metals, as well as hard plastics. The fully ground construction makes re‑grinding straightforward, while cooling and reduced chip adhesion are recommended for prolonged performance. For heavy or continuous cutting tasks, use with appropriate cooling and machine mounting to minimise risk of breakage. Who benefits from this specification Workshops and maintenance teams that need fast, accurate holes in metal will find this tool effective. The MetavCUT design targets machinists, fabrication professionals and service technicians who require quick bit swaps, precise hole location and the ability to drill a range of metallic materials without frequent tool replacement. The robust geometry and DIN 338 conformity support industrial usage and repeatable results. Strong recommendation: Choose the MetavCUT fully ground HSS‑G Twist Drill for precise metal drilling — for technical questions or to confirm suitability for your application, contact METAV Werkzeuge for competent advice via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill Brand: MetavCUT SKU: 57030‑FDA Diameter: 3 mm Point Angle: 118° Material: HSS‑G Execution: fully ground Flute Length: 30 mm Overall Length: 80 mm Shank Type: Hexagonal Colour: Silver For: Drilling Machine Norm: DIN 338 Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill, a Drill for Metal, is primarily applied when machining high‑strength materials and larger drill diameters. Its ground geometry is easy to re‑grind and withstands higher loads, enabling faster drilling rates and cleaner holes, which makes it especially suitable for alloyed and unalloyed steels, cast materials and hard plastics. Which three drill types exist? When considering drill categories, the main types are Metal drill, Wood drill and Stone/Concrete drill, and the MetavCUT Twist Drill belongs to the metal drill family designed for precise metalworking applications.
3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short, 3 mm, 135° tip, TIN-coated, HSS‑G, DIN 338 A Twist Drill (Type N) from MetavCUT for precise metal drilling with a short design suited to drilling machines. Short design for improved stability TIN-coated for extended tool life 135° tip angle for hard metals Fully ground HSS‑G for precise holes Conforms to DIN 338 for short twist drills Precision and durability that improve metalworking results The MetavCUT Twist Drill combines a 3 mm diameter with a 135° tip angle and a short overall length to deliver high precision when machining hard materials. The HSS‑G material and fully ground flute geometry enable sharp cutting edges and consistent concentricity, which produce cleaner holes and reduce wobble. This design reduces required feed forces and supports stable drilling on both stationary and portable drilling machines, making it well suited for professional metalworking tasks. Short length for greater stability and accuracy A shorter working length reduces overhang and thus vibration, which directly improves hole quality in demanding operations. The short configuration of this Type N twist drill increases stiffness and lowers the risk of deflection when drilling alloys, cast iron or tempered steels. For operators, this means fewer rejected parts and less rework, especially when precise hole position and diameter tolerance are critical in assemblies and components. Coating and material explained — longer lifetime under load The TiN coating (TIN‑coated) provides a hard, low-friction surface that reduces wear and heat buildup during metal cutting. When combined with HSS‑G construction, the coating extends tool life and maintains sharpness, especially under intermittent cooling or light lubrication. For users unfamiliar with the term, HSS‑G refers to high‑speed steel that has been ground (G) to produce very sharp cutting edges and high concentric accuracy, which is particularly beneficial for drilling small diameters such as 3 mm. Application advice and practical use cases This short Type N twist drill is designed primarily for metal: alloyed and unalloyed steel, cast iron, sintered metals, copper, bronze and hard plastics. The 135° tip angle shortens the initial penetration time for harder materials and improves centring. Use with appropriate coolant or cutting fluid for best wear performance, and prefer steady clamping and minimal overhang to exploit the stability advantages of the short design. For handheld drilling machines, ensure the chuck grip is secure and use steady feed to avoid breakage. Who benefits most from this tool Engineers, machinists and maintenance technicians who require repeatable, precise holes in metal parts will find the short Twist Drill especially valuable. The combination of fully ground geometry and TiN coating supports applications where hole quality matters — toolrooms, small-batch fabrication and repair workshops. The tool is also suitable for use in production where short, accurate drill cycles reduce scrap and improve throughput. Strongly recommended: choose the MetavCUT Twist Drill Type N for demanding metal drilling tasks thanks to its short, stable design and TiN coating — for personal technical advice or further specifications contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 46030-FDA Diameter: 3 mm Overall length: 61 mm Spiral length: 33 mm Tip angle: 135° Type: Type N Material: HSS‑G Coating/Colour: TIN-coated Shank execution: fully ground Execution: short Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? A Twist Drill from MetavCUT, Type N, is primarily used for machining high‑strength materials and larger bore diameters. The geometry of this short, fully ground HSS‑G drill allows relatively easy regrinding and withstands higher mechanical loads, making it suitable for demanding metalworking operations where durability and sharpness are required. Which three drill types are there? When selecting drills, the main categories are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill (Type N) falls into the Metal drills category and is optimised for steel, cast iron and other non‑ferrous metals.
3mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G Twist Drill, 3 mm, 135° point, Bright Finished, Fully Ground, DIN 340 The Twist Drill long HSS‑G is a precision drill for metalworking, designed for deep holes and use with a Drilling Machine. Long design for deeper or hard-to-reach holes 3 mm Diameter for precise pilot holes 135° Point angle for harder materials Fully ground shank for high concentricity Conforms to DIN 340 for industrial applications High‑performance material for demanding metalwork The Twist Drill uses HSS‑G (high‑speed steel, ground) to combine cutting performance with durability when machining tough metals. This material allows up to 40% faster drilling compared with conventional HSS in many applications and typically requires less feed force, which reduces operator strain and wear on the machine. The 135° point angle is optimised for harder materials such as stainless steel, shortening initial plunge time and improving centring on difficult surfaces. Long execution for deep bores and restricted access The long execution follows DIN 340 dimensions, providing extra overall length and extended spiral length for deep holes or recessed drilling positions. The extended geometry is ideal when the bore is set back from the workpiece edge or when using jigs that limit accessibility. Because the flute geometry is fully ground, concentricity and hole quality are improved, producing clean, precise bores suitable for finishing or reaming. Optimised geometry and handling recommendations A fully ground flute geometry delivers sharp cutting edges and excellent roundness, which benefits accuracy in demanding metalworking tasks. Operators should note that ground HSS drills can be more brittle than rolled types and therefore are best used with steady machine support and adequate cooling for long runs. Re‑sharpening restores edge geometry; therefore the tool can be maintained economically in a workshop environment. Intended users and typical applications This Twist Drill is aimed at professional workshops, toolrooms and industrial users who require reliable performance when drilling in legied and unlegied steels, cast irons and non‑ferrous metals. It is suitable for use in a Drilling Machine and for stationary applications where high concentricity and hole quality are priorities. For occasional handheld use, ensure the drill is clamped securely and run at appropriate speeds with coolant. We recommend the MetavCUT Twist Drill for deep metal drilling — for expert guidance and to confirm suitability for your application contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical details Designation: Twist Drill Brand: MetavCUT SKU: 53030-FDA Diameter: 3 mm Point angle: 135° Execution: long Finish/Colour: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 340 Spiral length: 66 mm Total length: 100 mm For use with: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for and which materials suit it best? The Twist Drill from MetavCUT (Twist Drill) is primarily applied to machining high‑strength materials and larger bore diameters; it performs well in alloyed and unalloyed steel, cast iron varieties and non‑ferrous metals, offering robust cutting action for demanding metalwork. Is the MetavCUT Twist Drill suitable for deep holes and recessed bores? Yes, the Twist Drill by MetavCUT is a long execution conforming to DIN 340, designed for deeper bores and situations where the drill must reach further into the workpiece than a standard length would allow. What are Twist Drills mainly used for? Twist Drills are mainly used when machining high‑strength materials and larger diameters; their form is easy to grind and they withstand higher loads. Which three drill types exist? The three principal drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the chisel edge at the tip of the Twist Drill, significantly lowering friction and therefore feed forces, while improving the drill’s ability to centre in the workpiece. Can metal Twist Drills be used for drilling wood? Metal drills can be used in wood but offer inferior guidance and a less clean finish; they are easier to re‑grind and have a reduced self‑feeding tendency compared with wood‑specific drills. For which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is often executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The general view that HSSE steels are categorically superior to standard HSS is incorrect; assess working conditions carefully to decide whether the higher cost of HSSE is justified for your application.
4.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — 4.1 mm, 118° Point Angle, Short HSS Drill by MetavCUT (Black, DIN 338) The Twist Drill Type N is a short High Speed Steel Metal Drill with a 4.1 mm Diameter and a 118° Point Angle, designed for precise work in Drilling Machines and handheld drilling applications. Short HSS design for improved stability Conforms to DIN 338 for short spiral drills 118° point for reliable centring on many metals Type N Normal Spiral for general metalworking Black finish with 75 mm overall length Exceptional Precision and Stability for Metalworking The short HSS construction of this Twist Drill provides higher stability and reduced tendency to bend compared with longer drills. With a 4.1 mm Diameter and a Spiral Length optimised to DIN 338, this geometry reduces run-out and vibration when used in a Drilling Machine or a Hand Drill, resulting in cleaner Holes and extended Tool Life. For professionals and hobbyists who demand repeatable accuracy, the compact form factor improves concentricity and simplifies alignment at the workpiece. Material Properties and What 118° Means for Your Work Made from HSS (High Speed Steel), this short Twist Drill resists heat and wear during standard metal drilling tasks. The 118° Point Angle offers a balanced penetration profile that eases centring on curved or mild surfaces and reduces walking on sheet materials, while still delivering efficient cutting in unalloyed and alloyed steels, cast iron, non-ferrous Metals and Plastics. The result is lower risk of Breakage on small diameters and reliable hole quality for through-drilling operations. Practical Applications and Who Benefits Most This Twist Drill Type N is intended primarily for drilling metal: workshops, maintenance departments and industrial users performing repair or fabrication tasks will appreciate the short design for confined setups. The tool suits both stationary and portable Drilling Machine use and is particularly effective when drilling diameters under typical hand-operated feed forces. Users seeking an uncomplicated, durable solution for everyday metalworking find this drill a practical choice. Why MetavCUT’s Short Twist Drill Stands Out Conforming to DIN 338, the short configuration of this Twist Drill emphasises precision and reduced deflection, which is crucial for repeatable results in production or repair work. The Type N Normal Spiral is a proven standard for general metal drilling and can be reground more easily than complex geometries. If you need tailored advice on whether the short HSS variant is the right solution for a specific material or machine, METAV Werkzeuge provides competent, detailed consultation to help you select the correct tool and operating parameters. Strongly recommend MetavCUT's short HSS Twist Drill Type N for precise metal drilling — for expert advice or technical questions contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 40041-FDA Diameter: 4.1 mm Point Angle: 118° Type: Type N Execution: Short Colour: Black Material: HSS Spiral Length: 43 mm Overall Length: 75 mm Application: Drills for metal For Drill Machine: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The Twist Drill (MetavCUT, Type N) is primarily applied to the machining of high-strength materials and larger drilling diameters in metalworking; its classic spiral form allows straightforward resharpening and reliable performance under higher loads. Which three drill types exist? Common drill categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill (Type N) belongs to the Metal Drill group and is optimised for steel and similar materials. Why are Twist Drills pointed (split-point or sharpened)? The tip geometry reduces the cross-cut at the drill point, which significantly lowers friction and the required feed force; the Twist Drill (MetavCUT, Type N) benefits from this by achieving better centring and easier penetration with reduced walking. Can the Twist Drill (MetavCUT, Type N) be used in wood? A Metal Drill such as the Twist Drill (MetavCUT, Type N) can be used in Wood, but guidance is inferior and the hole finish will be less clean compared with dedicated Wood Drills; however, these drills are easier to regrind and exhibit lower self-feeding tendencies. For which drilling depths is the Twist Drill mostly used? Solid through-holes are commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool, and the short variant offers higher stability for many workshop operations. What is better, HSS or HSSE? The assumption that HSSE is categorically superior to HSS is not always correct; when choosing between HSS and HSSE for the Twist Drill (MetavCUT, Type N), evaluate the working conditions carefully to determine whether the higher cost of HSSE is justified by the specific application.
4.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Profitieren Sie von der Kombination aus kurzer Ausführung für erhöhte Stabilität, HSS‑E mit 5% Kobaltlegierung für mehr Verschleißfestigkeit und dem 135° Spitzenwinkel für bessere Anbohrleistung in harten Werkstoffen; bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei Bedarf. Spiralbohrer 4,1 mm (HSS‑E) – MetavCUT Standard Line Der Spiralbohrer in kurzer Ausführung ist für präzise Metallbohrungen konzipiert und eignet sich besonders für legierten und unlegierten Stahl sowie für Gusseisen und Nichteisenmetalle. Kurze Ausführung für höhere Stabilität HSS‑E mit 5% Kobaltlegierung für längere Lebensdauer Geschliffene Schaftausführung für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für sicheres Anbohren harter Werkstoffe Geeignet für Handbohrmaschine und stationäre Bohrarbeiten Präzise Leistung für den Alltag in Werkstatt und Montage Die kurze Ausführung dieses Bohrers reduziert die Auskraglänge und minimiert damit Vibrationen sowie Verbiegen, was zu saubereren Bohrlöchern und höherer Maßhaltigkeit führt. Durch die Kombination aus geschliffener Geometrie und optimiertem Schneidwinkel entsteht eine sehr gute Rundlaufgenauigkeit, die sich in präzisen Ergebnissen bei Serien- und Einzelfertigung niederschlägt. Für Anwender bedeutet das weniger Nacharbeit und eine verlässlichere Prozessqualität. Materialkompetenz und Fertigungsverfahren für harten Einsatz Gefertigt aus HSS‑E (Schnellarbeitsstahl mit Kobalt) und mit 5% Kobaltlegierung, bietet dieser Bohrer verbesserte Warmfestigkeit und Zähigkeit gegenüber herkömmlichem HSS. Die geschliffene Herstellung sorgt für scharfe Schneiden und saubere Spanführung, was besonders beim Bohren in harten Werkstoffen wie Edelstahl oder legiertem Stahl von Vorteil ist. Die Einordnung nach DIN 338 bestätigt die Ausführung als kurzer Spiralbohrer mit Zylinderschaft. Praxiseinsatz, Maschinenkompatibilität und Verarbeitungshinweise Der Durchmesser von 4,1 mm liegt im Standard‑Bereich, somit eignet sich der Bohrer sowohl für Handgeführte Akkubohrschrauber als auch für stationäre Säulenbohrmaschinen. Im Vergleich zu langen Bohrern bietet die kurze Bauform deutlich bessere Stabilität; das verringert Bruchrisiken besonders bei kleinen Durchmessern. Für saubere Ergebnisse bei Metall empfiehlt sich der Einsatz von Kühlschmierstoff und moderatem Vorschub, Schraubfutter fest anziehen und Rundlauf prüfen. Handling, Vorsichtsmaßnahmen und Zielgruppe Für Anwender im Maschinenbau, in der Instandhaltung und im Handwerk ist dieser Bohrer eine wirtschaftliche Wahl, wenn es um zuverlässige Metallbearbeitung geht. Bei Bohrungen über das Fünffache des Durchmessers oder bei extrem zähen Werkstoffen sind abgestufte Vorgehensweisen zu wählen. Kleine Durchmesser wie 4,1 mm profitieren von hoher Drehzahl und kontrolliertem Vorschub; das reduziert Spanaufbau und verlängert die Lebensdauer des Werkzeugs. Setzen Sie auf die MetavCUT Standard Line und fordern Sie eine persönliche Beratung per info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 an, um die passende Ausführung für Ihre Anwendung zu wählen. Produktmerkmale Artikelnummer: 47041-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Daten Durchmesser: 4,1 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑E — Schnellarbeitsstahl mit Kobalt Schaftausführung: geschliffen — CNC‑Schliff für hohe Rundlaufgenauigkeit Farbe: 5% kobaltlegiert Ausführung: kurz — reduzierte Auskraglänge für Stabilität Typ: Typ N — Normalspirale, klassischer Metallbohrer Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich der Bohrer besonders gut? Der Spiralbohrer von MetavCUT (Standard Line, SKU 47041-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; die Kombination aus HSS‑E und 5% Kobaltlegierung erhöht die Standzeit beim Bohren in harten Materialien. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, der Spiralbohrer 4,1 mm (MetavCUT Standard Line, 47041-FDA) ist für den Einsatz in Handbohrmaschinen geeignet; die kurze Ausführung bietet dabei mehr Stabilität und reduziert die Gefahr von Verbiegen. Ist die Schaftausführung geschliffen oder gewalzt? Die Schaftausführung dieses Bohrers ist geschliffen, was eine hohe Rundlaufgenauigkeit und scharfe Schneidkanten gewährleistet; das ist besonders bei präzisen Metallbohrungen von Vorteil. Welche Vorteile bietet der 135° Spitzenwinkel in der Praxis? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers (47041-FDA) verringert das Ausbrechen beim Anbohren harter Werkstoffe und verbessert die Zentrierwirkung, sodass kontrolliertes Anbohren ohne übermäßiges Wandern möglich ist. Wie wird der Bohrer geliefert und wie viele Stück sind in einer Einheit? Der Spiralbohrer wird in einer Verpackungseinheit von 10 Stück geliefert; die SKU lautet 47041-FDA und gehört zur MetavCUT Standard Line.
4.1mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
MetavCUT Body Drill – Twist Drill, Ø 4.1 mm, 135°, Double-sided, Bright finished, HSS‑G, Fully ground The MetavCUT Body Drill is a double‑ended Twist Drill designed for precision metalworking in Drilling Machines, offering a 135° tip angle and a fully ground shank for high concentric accuracy. HSS‑G construction for hard metals Double‑ended design for extended usability 135° tip angle for stainless steel and hard alloys Fully ground shank for precise concentricity Bright finished surface for smooth chip flow Outstanding cutting performance for demanding metals Designed for work with legated and unlegated steels, this Twist Drill delivers high cutting performance thanks to its HSS‑G alloy and a 135° tip angle. The geometry reduces radial forces when entering hard materials, so drilling starts cleaner and with less wandering. Users benefit from faster penetration in tough substrates and a reduced risk of workpiece damage. Practical workshops find the shorter, double‑ended format especially suited to sheet and bodywork tasks where repeatable, centred holes are required. Long life through precise grinding and surface finish A CNC grind of the flutes creates very sharp cutting edges and excellent runout properties, while the bright finished surface supports consistent chip evacuation. This ground manufacturing approach yields cleaner holes and longer usable life under appropriate cooling. The fully ground shank improves centring in chucks and reduces vibration, which in turn enhances tool life and hole quality when used in a stable Drilling Machine setup. Applications, guidance and safe handling in the workshop Engineered for metalworking, the Twist Drill is particularly effective on cast materials, Tempered Steels, Non‑Ferrous Metals and Hard Plastics. For best results, select appropriate cutting speeds and use coolant for higher alloy steels. When turning a blunt side, the double‑ended design allows immediate reuse by flipping the tool, providing operational efficiency in production or maintenance environments. Always secure the workpiece and observe safety practices when working with high‑speed Metal Drilling. Who benefits most and why experts choose this design Maintenance technicians, panel beaters and precision shops benefit from the combination of double‑ended utility and HSS‑G sharpness. The reduced axial force and improved centring capability make the drill a practical choice for repeatable holemaking in bodywork and thin‑plate metal applications. MetavCUT’s Standard Line aims to balance robust performance with straightforward handling for both station‑based and mobile Drilling Machine work. Strong recommendation: Choose the MetavCUT Body Drill for precision metal drilling — contact METAV Werkzeuge for tailored advice and technical support via email, phone or WhatsApp Are you unsure whether this Twist Drill meets your requirements or need additional data? METAV Werkzeuge offers competent consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58041-FDA Diameter: 4.1 mm Tip Angle: 135° Spiral Length: 13 mm Overall Length: 55 mm Material: HSS‑G Execution: Double-sided Shaft Execution: Fully ground Colour: Bright finished Intended Use: Drills for metal / Drilling Machine Model Series: Standard Line Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Body Drill Twist Drill? The MetavCUT Body Drill Twist Drill is primarily used for machining high‑strength metals and larger drilling diameters; its double‑ended design and HSS‑G composition make it suitable for demanding bodywork and thin‑plate applications where robust, repeatable holes are required. Can the MetavCUT Body Drill be used in handheld drills? The MetavCUT Body Drill Twist Drill is intended for use with Drilling Machines but can be used in suitable Hand Drills when proper clamping and reduced cutting speeds are observed; for best performance and safety, a stable Drilling Machine with coolant is recommended. What are Twist Drills primarily used for? Twist Drills are mainly applied in the machining of high‑strength materials and larger drill diameters; their design enables straightforward resharpening and they withstand higher loads, making them ideal for metalworking and bodywork tasks. Which three drill types exist? There are three common families of drill: Metal Drills, Wood Drills, and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the secondary cutting edge at the tip of the Twist Drill, which lowers friction forces and therefore decreases required feed force while improving centre‑holding accuracy in the workpiece. Can a metal drill be used to drill wood? A Metal Drill can be used in wood, but guidance and hole finish are generally inferior compared to purpose‑made Wood Drills. Metal Drills are easier to resharpen and tend to have less aggressive self‑feed characteristics. For which drilling depths is the Twist Drill most commonly used? A through‑hole is typically made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.
4.1mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Spiralbohrer – MetavCUT Standard Line, HSS-G, 4,1 mm Der Spiralbohrer in extra kurzer Ausführung ermöglicht stabile und kraftsparende Bohrungen in Metall bei begrenztem Bauraum. Spiralbohrer MetavCUT, Typ N Extra kurze Ausführung für enge Arbeitsräume HSS-G: schnelles Bohren in Stahl und Guss Zylinderschaft: passt in Standard-Bohrfutter 135° Spitzenwinkel für härtere Werkstoffe Mehr Leistung durch geschliffene HSS-G-Schneide für schnellere Ergebnisse Die geschliffene HSS-G-Schneide reduziert die Reibung und ermöglicht nach Herstellerangaben ein um bis zu 40 % schnelleres Bohren sowie rund 50 % geringere Anpresskraft gegenüber herkömmlichen HSS-Varianten. Dies bedeutet weniger Ermüdung bei der Arbeit und höhere Produktivität in der Werkstatt. Mit dieser Kombination aus robuster Werkstoffauswahl und optimierter Geometrie wird die Bearbeitungszeit bei Serien- und Einzelfertigungen spürbar verkürzt. Extra kurze Bauform sorgt für Stabilität und Flexibilität beim Bohren in engen Bereichen Die extra kurze Bauform erhöht die Verdrehungsfestigkeit und senkt die Bruchneigung, wenn wenig Bauraum zur Verfügung steht. Dadurch eignet sich der Bohrer besonders für Bleche, Profileisen und andere dünnwandige Werkstücke. Anwender profitieren von einfacher Handhabung in Winkelbohrmaschinen und bei beengten Montageverhältnissen, ohne auf Standzeit oder Präzision verzichten zu müssen. Universelle Schaftausführung und passende Geometrie für Metallanwendungen Der Zylinderschaft gewährleistet eine problemlose Aufnahme in gängige Dreibackenfutter und macht den Bohrer universell einsetzbar in Handbohrmaschine und Winkelbohrmaschine. Die 135° Spitzenwinkel-Geometrie optimiert das Anbohren härterer Werkstoffe wie legierten Stahl und Guss und reduziert das Auslaufen beim Startpunkt. So entstehen sauberere Bohrbilder und geringerer Nacharbeitaufwand. Zielgruppe, Einsatzbereiche und Praxistipps für sichere Ergebnisse Entwickelt für Werkstatt, industrielle Instandhaltung und anspruchsvolle Heimwerker, liefert die Standard Line zuverlässige Ergebnisse beim Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetallen. Zur Vermeidung von Durchrutschen im Bohrfutter empfiehlt sich bei hohem Drehmoment die Nutzung eines Spannfutters mit zusätzlicher Sicherung. Für höhere Präzision vorzentrieren oder ein kleines Ansenkbohrloch setzen. Setzen Sie auf den MetavCUT Standard Line Spiralbohrer in extra kurzer Ausführung für effizientere Metallbearbeitung; bei technischen Fragen steht Metav direkt zur Verfügung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 56041-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 1897 Daten Durchmesser: 4,1 mm Gesamtlänge: 55 mm Spirallänge: 22 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (schnellarbeitsstahl, geschliffen) Ausführung: extra kurz (stabilere Länge, reduzierte Bruchneigung) Schaftausführung: Zylinder (passt in Standard-Bohrfutter) Typ: Typ N (Normalspirale für Metall) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line FAQ Wie unterscheidet sich die extra kurze Ausführung von Standardlängen? Die extra kurze Ausführung des Spiralbohrers bietet mehr Stabilität und eine geringere Bruchneigung als Standardlängen, wodurch sie besonders bei beengten Arbeitsverhältnissen und dünnwandigen Werkstücken vorteilhaft ist. Für welche Materialien ist der MetavCUT Standard Line Spiralbohrer geeignet? Der MetavCUT Standard Line Spiralbohrer aus HSS-G eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff. Welche Vorteile bietet der 135° Spitzenwinkel in der Praxis? Ein 135° Spitzenwinkel reduziert das Wandern beim Anbohren in härteren Werkstoffen und sorgt für kürzere Anbohrzeiten sowie bessere Zentrierung bei Materialien wie Edelstahl und gehärtetem Stahl. Ist der Zylinderschaft für alle Bohrmaschinen geeignet? Der Zylinderschaft passt in gängige Dreibackenfutter von Handbohrmaschinen und Winkelbohrmaschinen, kann bei sehr hohem Drehmoment jedoch zum Durchrutschen neigen; in solchen Fällen ist ein Spannfutter mit besserer Kraftübertragung empfehlenswert. Welche Vorteile bringt die geschliffene HSS-G-Schneide konkret? Die geschliffene HSS-G-Schneide reduziert Reibung, ermöglicht schnellere Vorschübe und senkt die benötigte Anpresskraft, was die Effizienz erhöht und die Belastung für Maschine und Anwender vermindert.
4.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G, 4.1 mm, 135°, Bright Finished, DIN 338 by MetavCUT A Twist Drill (Type N) in short execution for precise metal drilling with a 4.1 mm diameter and a 135° point angle, suited for use in Drilling Machines and Hand Drills. Short execution for increased stability and precision Fully ground shank for high concentricity 135° point angle optimised for hard materials Conforms to DIN 338 for short HSS twist drills Outstanding drilling performance and faster cycle times The short Twist Drill in HSS‑G combines a reduced overhang with a ground flute geometry to deliver high stability and precision when machining metal. Shorter projection reduces the tendency to deflect, which translates into cleaner holes and longer tool life under comparable conditions. The ground design provides very sharp cutting edges and excellent runout accuracy, enabling up to 40% faster drilling speeds and requiring up to 50% less feed force compared with conventional HSS versions when used with suitable machining parameters. Robust geometry for demanding materials With a 135° point angle and the classical Type N spiral, this drill is optimised for harder materials such as stainless and alloyed steels. The larger point angle shortens the initial entry phase, improving centring and reducing chatter on tough surfaces. The fully ground shank and CNC‑ground flutes ensure consistently accurate centring and repeatable hole quality, making it ideal for precision metalworking tasks in production and repair environments. Practical design for workshop and machine use Designed to the DIN 338 standard for short twist drills with cylindrical shank, this tool is intended primarily for stationary or mobile machine applications where high concentricity is required. The short length and bright finished surface facilitate handling and inspection, while the overall length of 75 mm and spiral length of 43 mm suit common drilling depths without unnecessary flex. The Type N geometry focuses on metalworking, not soft woods or masonry. Who benefits from this Twist Drill Engineers, maintenance technicians and metalworkers who demand precise, repeatable holes in alloys and steels will value the combination of HSS‑G material and short design. The drill is particularly useful where tool rigidity matters—small bores in hardened or cast materials and jobs on bench drills or portable drilling machines where minimising deflection improves final part quality. For tasks requiring high surface finish and tight tolerances, this drill provides reliable performance. For applications requiring expert advice on suitability, tolerances or recommended machining parameters, Metav Werkzeuge offers comprehensive technical support — contact via info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 We recommend the MetavCUT Twist Drill Type N for precision metalworking where stability and repeatable hole quality are essential — for tailored technical guidance contact METAV Werkzeuge. Twist Drill (Bezeichnung): Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 45041-FDA Type: Type N Diameter: 4.1 mm Point angle: 135° Execution: Short (kurz) Colour / Finish: Bright Finished (blank) Shank design: Fully Ground (geschliffen) Spiral length: 43 mm Overall length: 75 mm Material: HSS‑G Standard / Norm: DIN 338 Application: Drills for metal (Bohrer für Metall) Model series: Standard Line Intended machine: Drilling Machine / Hand Drill (Handbohrmaschine) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill from MetavCUT (Type N)? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger hole diameters; its ground geometry makes it easy to regrind and it withstands higher loads, which suits it for demanding metalworking tasks. Which three drill types exist and how does the MetavCUT Twist Drill fit in? Common categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill group and is designed specifically for steels and similar materials. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the chisel edge at the tip, lowering friction and the required feed forces while improving centring of the drill in the workpiece for the MetavCUT Twist Drill (Type N). Can a metal Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and surface quality are inferior compared with dedicated wood drills; however, metal drills are easier to regrind and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through hole is typically made with a Twist Drill; for diameters up to about 20 mm and depths up to 100 mm the Twist Drill is the most frequently used tool, including the MetavCUT short HSS‑G versions. Is HSS or HSSE better for my application? The notion that HSSE is always superior to HSS is not universally true; evaluate working conditions and material specifics before choosing, and consult Metav Werkzeuge for tailored advice on whether the MetavCUT HSS‑G Twist Drill is appropriate.
4.1mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — HSS-G Twist Drill (Diameter 4.1 mm, 135° Point, Long, Bright Finished) The Twist Drill is a long HSS-G drill bit designed for deep metal drilling and tight access areas, suitable for use with hand and drilling machines and compliant with DIN 340. Long HSS-G design for deep holes 4.1 mm Diameter for precise pilot holes 135° point angle for hard materials Fully ground shank for high runout accuracy DIN 340 long series with bright finish Power and Precision for Demanding Metalwork The Twist Drill from MetavCUT combines the wear resistance of HSS-G with a 135° point geometry to tackle harder alloys with improved centring. The ground flute geometry delivers sharp cutting edges and consistent chip evacuation, which reduces cutting forces and increases hole quality. For operations in alloyed and unalloyed steel, cast materials and hard plastics, this design ensures a reliable, repeatable machining result and reduces the need for rework. Reach Deeper: Long Version for Difficult Access Engineered as a long execution according to DIN 340, this drill offers extended overall length and working spiral length to access recessed or hard-to-reach bore sites. The longer geometry makes it ideal for drilling deeper holes without switching tools. The bright finished surface helps to reduce friction and improves visibility of the cutting zone, while the fully ground shaft provides superior runout accuracy for straight, precise holes even when used in hand-held drilling setups. Best Materials and Typical Applications This Twist Drill is particularly suited to drilling operations in legierte und unlegierte Stähle (alloyed and unalloyed steel), Gussstahl, Gusseisen, Sintereisen, Nichteisenmetalle and hard engineering plastics. The combination of HSS-G material and the 135° tip reduces chipping and improves entry in tougher substrates. When used as intended, users benefit from cleaner hole walls and maintained dimensional accuracy, which simplifies subsequent assembly or finishing steps. Handling Tips for Reliable Results To preserve tool life and maintain performance, use moderate feed with adequate coolant when machining harder materials; the ground geometry can be more brittle than rolled alternatives and benefits from controlled cutting conditions. For best centring and lower heat build-up, start with a suitable pilot where possible and ensure the drill is clamped with minimal runout. The fully ground shaft enhances chuck performance and reduces vibration, supporting consistent hole quality in both production and workshop environments. Choose the MetavCUT Twist Drill for precise, deep metal drilling — for personalised technical advice and application support contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 53041-FDA Diameter: 4.1 mm Point angle: 135° Execution: long Overall length: 119 mm Spiral length: 78 mm Colour: bright finished Shaft execution: fully ground Material: HSS-G Norm: DIN 340 Model series: Standard Line Application: Drills for metal For drilling machine: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill primarily used for? The MetavCUT Twist Drill is mainly applied for machining high-strength materials and larger bore diameters; its long version suits deeper holes and less accessible locations while the ground geometry allows faster drilling with lower applied feed force. Can the MetavCUT Twist Drill be used with a hand drilling machine? Yes, the MetavCUT Twist Drill is suitable for use with a Handbohrmaschine (drilling machine); its fully ground shaft improves chuck grip and runout accuracy, making it appropriate for both stationary and careful hand-held applications when correct speeds and cooling are observed. For what is a Twist Drill used? A Twist Drill is primarily applied when machining high-strength materials and larger drill diameters; this form is easy to resharpen and withstands higher loads. Which three drill types are there? Metal drill, Wood drill, Stone/Concrete drill. Why are Twist Drills pointed? The pointing reduces the cross edge at the tip of the Twist Drill, which significantly lowers friction forces and requires reduced feed force; pointing also improves centring of the drill tip in the workpiece. Can you drill wood with a Twist Drill? A metal drill can also be used in wood, but guidance and surface quality are inferior; however, such drills are easier to resharpen and usually have less self-feed tendency. At what drilling depths is the Twist Drill most commonly used? Solid drilling with a Twist Drill is common; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to standard HSS is not correct; evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for your application.
4.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
MetavCUT Twist Drill — Type N, 4.25 mm, HSS, Short, 118° (Black, DIN 338) The MetavCUT Twist Drill Type N is a short HSS metal drill designed for precise holemaking in hand drills and drilling machines. Short HSS design for high stability 118° point angle for reliable centring 4.25 mm precision diameter DIN 338 compliant for short twist drills Suitable for hand drills and drilling machines Greater accuracy through a short, stable design The short Twist Drill construction reduces overhang and therefore vibration, which significantly improves hole accuracy when working with metal. Made from HSS (High Speed Steel), this short Type N cutter offers elasticity that lowers the risk of breakage when drilling small holes under 6 mm. For users who require clean, repeatable results in maintenance work or light production, the compact geometry means less runout and faster setup. Optimised tip and geometry for metalworking efficiency A 118° point angle balances centring ability and cutting action for many common metals; it makes the drill easier to start and is suitable for materials like mild steel and aluminium. The Type N spiral is the classic metal-drilling geometry, engineered for chip evacuation and durable performance. Choosing the correct point angle reduces the need for rework and shortens cycle time when multiple holes are required. Material compatibility and practical guidance This short HSS tool is intended primarily for metal applications including alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics — in other words, typical uses grouped under "Drills for metal". Because the Type N geometry is not optimised for very soft woods, users seeking cleaner guidance for timber should prefer dedicated wood drills. For longevity, moderate cutting speeds and proper lubrication when machining harder alloys are recommended. Who benefits and where to use it Maintenance technicians, machinists and metalworking hobbyists who operate hand drills or compact drilling machines will gain most from this compact twist drill. Its 4.25 mm diameter and short overall length provide a stable tool for confined setups and jig work. If uncertainty remains about suitability for a specific material or machine, METAV Werkzeuge offers comprehensive, expert advice to match tools to tasks. Choose the MetavCUT Twist Drill Type N for precise metal drilling and contact METAV Werkzeuge for tailored technical support — 📧 info@metav-werkzeuge.com • ☎️ +49 2822 7131930 • ✔️ WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 400425-FDA Diameter: 4.25 mm Spiral length: 43 mm Total length: 75 mm Point angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: short Colour: black Standard: DIN 338 Application: Drills for metal For use with: Hand Drill / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily applied to the machining of high-strength materials and larger drill diameters; its shape allows relatively easy resharpening and it withstands higher loads, making it suitable for drilling steel, cast iron and non-ferrous metals. Which three drill types exist? There are three main drill categories: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N is an example of a metal drill optimised for machining metallic materials.
4.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short HSS‑G drill, Ø 4.25 mm, 135° tip, bright finished The Twist Drill Type N is a short, fully ground HSS‑G drill engineered for precise metalworking tasks in drilling machines and hand drills. Short design for higher stability and precision HSS‑G ground geometry for clean metal holes 135° tip for harder materials like stainless steel Fully ground shank for accurate runout Conforms to DIN 338 for short twist drills Precision and strength for demanding metalworking The Twist Drill from MetavCUT combines a HSS‑G ground geometry with a 135° point to deliver reliable performance when drilling harder metals. Because the flutes and cutting geometry are produced by CNC grinding, the result is sharp cutting lips and a high runout accuracy, which leads to cleaner holes and reduced burr formation. This short version reduces overhang and therefore vibration, so the user benefits from improved centring and longer tool life when paired with adequate cooling. Stable holes through reduced overhang and robust shank A shorter overall length means less deflection and better feed control, particularly when working on alloyed and unalloyed steel, cast steel, and non‑ferrous metals. The fully ground shank ensures accurate clamping and minimal eccentricity in the chuck, which supports consistent hole quality. Use in stationary or portable drilling machines profits from the increased stiffness, making the drill a good choice for workshop setups where precision matters. Who gains most from this compact design Metalworkers, maintenance technicians and toolroom operators will appreciate the combination of a short flute length and Type N normal spiral for typical metal drilling tasks. The drill was designed to excel where stable, repeatable holes are required rather than for deep through‑holes. For users needing quick, accurate spot drilling and finishing holes in tougher materials, this design reduces rework and improves process reliability. Practical guidance and material recommendations To maximise performance, operate the drill with appropriate cutting fluid and moderate speeds for the workpiece material. The 135° point reduces chipping on entry and shortens the start time on hard metals; however, for very soft materials consider a different point geometry. The designation DIN 338 indicates this is a short cylindrical‑shank twist drill series; ground types like this (often marked HSS‑G) are easier to re‑sharpen but can be more brittle than rolled variants, so avoid excessive side loads and use cooling where possible. Highly recommended for precision metalwork: choose the MetavCUT Twist Drill Type N with HSS‑G ground geometry and consult METAV Werkzeuge for tailored technical advice — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 450425-FDA Diameter: 4.25 mm Total Length: 75 mm Spiral Length: 43 mm Point Angle: 135° Type: Type N Execution: short Colour: bright finished For Drilling Machine: Drilling Machine Shank Execution: fully ground Model Series: Standard Line Material: HSS-G Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N by MetavCUT used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters in metalworking. Its short design and ground geometry make it suitable for precise metal drilling tasks where stable, clean holes are required. Which three drill types exist? Common drill categories are metal drills, wood drills and masonry/concrete drills, and the MetavCUT Twist Drill Type N belongs to the metal drill group designed for ferrous and non‑ferrous metals. Why are twist drills pointed? The point on a twist drill reduces the size of the chisel edge at the tip, lowering friction and therefore the required feed force; this improves centring and reduces the tendency for the drill to wander in the workpiece. Can a metal twist drill be used for wood? A metal‑type drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically inferior compared with dedicated wood drills; however, metal drills are easier to re‑sharpen and have lower self‑feed tendencies.
4.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill (Type N) — 4.2 mm · 118° point · short · black · DIN 338 · HSS · MetavCUT The Twist Drill Type N is a short HSS metal-drilling bit designed for precise work with hand and drilling machines. High-Speed Steel for durable metal drilling Short design for improved stability and precision 118° point angle for easier centring on workpieces Conforms to DIN 338 for consistent manufacturing quality Black finish reduces glare and improves visibility Precision and durability for demanding metalwork Built for metal applications, this short HSS bit provides a reliable combination of hardness and elasticity. The material choice—High Speed Steel—ensures sustained cutting performance on alloyed and unalloyed steels, cast iron and non-ferrous metals while reducing the risk of brittle fracture on small diameters. For operators who require repeatable hole quality, the use of a Type N geometry yields steady chip formation and prolonged tool life. Better control and straighter holes thanks to the short design Because the overall length is reduced, vibration and deflection are minimised, resulting in straighter bores and improved surface finish. The compact geometry of this short variant increases rigidity when clamped in the chuck, which is especially advantageous for precise bench and hand drilling tasks. Users notice fewer wander effects at the start of the hole and a lower tendency for the tool to chatter under moderate feeds. Faster centring and adaptable cutting with the 118° point A 118° point angle offers balanced entry performance and is well suited to softer to medium-hard metals and general-purpose shop work. This tip geometry helps to centre the bit quickly without excessive force, making initial alignment easier on curved or slightly irregular surfaces. For operators unfamiliar with drill geometry, the shorter point reduces the chance of slipping while starting the hole and supports consistent results. Designed for workshop use and straightforward application Engineered to DIN 338 standards, this bit fits the typical requirements of industrial and craft environments: consistent dimensions, reliable tolerances and easy handling. The black surface finish improves visibility against bright metal shavings and can offer modest protection against corrosion. Suited to standard drilling machines and hand operation, the tool is a practical choice for mechanics, maintenance teams and metal fabricators seeking a robust general-purpose twist drill. Strong recommendation: Choose the MetavCUT Twist Drill Type N for precise metal drilling — METAV Werkzeuge provides expert technical advice and support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 40042-FDA Diameter: 4.2 mm Spiral length: 43 mm Total length: 75 mm Point angle: 118° Execution: short Type: Type N Colour: black Material: HSS Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine / Hand drilling machine Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; the HSS composition makes this drill suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, delivering reliable performance in standard shop conditions. How does the short version of the Twist Drill improve results? A short Twist Drill reduces overhang and therefore deflection, which improves hole accuracy and surface finish. The shorter length increases rigidity in the chuck and lowers the tendency to chatter during manual or machine drilling. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high-strength materials and large drill diameters. Its form allows straightforward sharpening and it withstands higher loads during drilling. Which three drill types exist? The three common drill types are metal drill, wood drill and stone/concrete drill. Why are Twist Drills pointed? Pointing reduces the cross-cut at the tip of the Twist Drill. By regrinding the tip, friction forces are significantly lowered which reduces the required feed force; at the same time the drill tip centres better in the workpiece. Can a metal drill be used for wood drilling? A metal drill can be used in wood, but guidance and hole cleanliness are typically worse than with a dedicated wood bit. Metal drills are easier to resharpen and have less self-feeding action. At which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is usually made with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE steels are always superior to conventional HSS is not universally true. When choosing, consider whether the working conditions justify the higher purchase price of HSSE.
4.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Die Kombination aus hoher Stabilität, langlebigem HSS-E und präzisem 135° Spitzenwinkel sorgt für saubere Metallbohrungen bei geringem Bruchrisiko; bei Fragen zur Anwendung hilft die Beratung von Metav gern weiter. Bestellen Sie den Spiralbohrer von MetavCUT direkt über Metav oder rufen Sie die Technik an. Spiralbohrer kurz HSS-E 4,2 mm von MetavCUT Spiralbohrer von MetavCUT in Kurz-Ausführung für präzise Metallbohrungen mit hoher Standzeit und guter Rundlaufgenauigkeit Spiralbohrer »47042-FDA« von MetavCUT HSS-E 5% Kobaltlegierung für harte Werkstoffe geschliffen für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für Edelstahl und Stahl Kurze Ausführung für mehr Stabilität beim Bohren Höhere Präzision durch geschliffene Werkzeuggeometrie Die geschliffene Fertigung sorgt für sehr scharfe Schneiden und eine ausgezeichnete Rundlaufgenauigkeit, was sich in sauberen Bohrbildern und gleichmäßigen Spankonturen niederschlägt. Die Ausführung nach DIN 338 klassifiziert den Bohrer als kurzen Spiralbohrer mit Zylinderschaft und macht die Qualität nachvollziehbar. Anwender profitieren von vermindertem Wandern beim Anbohren und besserer Zentrierung im Werkstück. Robustheit und Einsatzbereiche für den Werkstattalltag Diese Kurz-Ausführung wurde für den Einsatz an der Handbohrmaschine und stationären Maschinen entwickelt und eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe. Die reduzierte Auskraglänge erhöht die Stabilität und senkt das Risiko von Verbiegen oder Bruch, wodurch die Produktivität in Werkstatt und Montage steigt. Optimaler Spitzenschliff und Typ N Geometrie für Metall Der 135° Spitzenwinkel reduziert das Anheben beim Anbohren harter Werkstoffe und verbessert die Anlaufeigenschaften in dünnen Blechen und Profilen. Die normale Spirale Typ N ist die klassische Metallgeometrie und bietet ausgewogene Spanabfuhr bei typischen Schnittbedingungen. Für Edelstahl empfiehlt sich die Verwendung von Kühlschmierstoff und moderater Vorschubgeschwindigkeit. Praxisnahe Hinweise für sicheren Einsatz Für saubere Passungen vorher mit einem Zentrierbohrer anpunktieren und bei Bohrungen tiefer als das Fünffache des Durchmessers Zwischenbohrungen planen. Die Kurz-Ausführung verringert das Bruchrisiko bei Bohrungen unter 6 mm, die Rolle der Kühlung bleibt bei harten Werkstoffen entscheidend. Verpackungseinheit Zehn Stück macht die Bestellung für kleine Werkstätten wirtschaftlich praktikabel. Empfehlung: Der Spiralbohrer von MetavCUT in der Standard Line verbindet Stabilität, HSS-E und präzise Geometrie — bei Fragen zur Auswahl kontaktieren Sie Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47042-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 338 Ausführung: kurz Fakten Durchmesser: 4,2 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-E (Schnellarbeitsstahl mit Kobaltanteil) Kobaltlegierung: 5% kobaltlegiert Schaftausführung: geschliffen (Vollschliff) Typ: Typ N (Normalspirale für Metall) Für Bohrmaschine: Handbohrmaschine FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT aus HSS-E mit 135° Spitzenwinkel ist für Edelstahl geeignet; bei rostfreien Stählen empfiehlt sich Kühlung und moderater Vorschub, um Standzeit und Bohrbild zu optimieren. Welche Vorteile bietet die geschliffene Ausführung gegenüber gewalzten Bohrern? Die geschliffene Ausführung des Spiralbohrer liefert schärfere Schneiden und bessere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; das Modell 47042-FDA ist daher besonders für präzise Metallbearbeitung empfohlen. Für welche Maschinen ist dieser Bohrer vorgesehen? Der Spiralbohrer 47042-FDA wurde für Handbohrmaschine und stationäre Maschinen entwickelt und eignet sich im Standard-Bereich für Werkstatt, Montage und DIY-Anwendungen. Wie viele Bohrer sind pro Verpackungseinheit enthalten? Die Verpackungseinheit umfasst Zehn Stück, was die Versorgung kleiner Werkstätten vereinfacht und Nachbestellungen reduziert. Worin liegt der Nutzen der 5% Kobaltlegierung beim HSS-E Bohrer? Der Kobaltanteil erhöht die Warmhärte und Verschleißfestigkeit des HSS-E Materials, so dass der Bohrer auch bei höheren Schnitttemperaturen und in gehärteteren Werkstoffen länger zuverlässig arbeitet.
4.2mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill — Twist Drill, 4.2 mm, 135° tip, double sided, bright finished, HSS‑G The Body Drill is a double‑sided twist drill for metalworking, designed for use with drilling machines and optimised for sheet metal and rivet holes. Double‑ended design for reversible use Fully ground HSS‑G for high precision Optimised 135° tip for hard metals Bright finished surface for easy chip evacuation Short, stable geometry for sheet metal work High‑performance Material for Faster, Cleaner Drilling The HSS‑G construction combined with a fully ground shaft yields exceptionally sharp cutting edges and high concentricity. This manufacturing method—CNC grinding rather than rolling—produces a Twist Drill with very precise geometry, which leads to cleaner holes and reduced runout. In practice, the ground HSS geometry can deliver up to 40% faster drilling with roughly 50% less feed force compared with conventional HSS variants, making it particularly effective when working with alloyed and unalloyed steels, cast materials and hard plastics. Precision Tip Geometry Minimises Entry Time and Workpiece Damage An optimised 135° tip shortens the initial contact time and improves centring on harder materials such as stainless steel and cast iron. The larger tip angle spreads cutting forces and reduces tendency to chip or pull, so the Twist Drill penetrates smoothly under proper coolant and clamping conditions. For users this means fewer re‑drills, better surface quality and lower risk of workpiece distortion when producing precise, repeatable holes. Double‑ended Design: Practical and Economical in Sheet Metal Work The double‑sided (double‑ended) configuration functions like two drills in one: when one cutting end becomes dull it can be reversed and the opposite end used immediately. This compact, short geometry is ideal for Body‑ and sheet‑metal applications, especially where rivet or thin‑plate holes are common. The bright finished surface aids chip flow and inspection, while the short length improves stability in handheld or bench drilling operations. For best results use with appropriate speeds and cooling to mitigate brittleness under heavy loads. Who Benefits and How to Use It for Long Service Life Metalworkers, body shop technicians and maintenance teams benefit from the stable cutting action and easy reversibility of this twist drill. For optimal life and hole quality, clamp the workpiece securely, use adequate cooling, and avoid excessive feed on thin sheets. The MetavCUT Body Drill performs well in drilling machines and stationary setups; due to its ground geometry it is also straightforward to re‑sharp in a controlled workshop environment if required. Choose the MetavCUT Body Drill for reliable, high‑precision sheet metal and general metal drilling — for technical advice or help selecting the right drill for your application contact METAV Werkzeuge; we provide expert consultation by e‑mail, phone and WhatsApp: info@metav-werkzeuge.com · +49 2822 7131930 · +49 170 2837271 Technical Specifications Designation: Body Drill Brand: MetavCUT SKU: 58042-FDA Diameter: 4.2 mm Overall length: 55 mm Spiral length: 13 mm Tip angle: 135° Material: HSS‑G Execution: double sided Shank execution: fully ground Colour / Finish: bright finished For use with: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Body Drill (MetavCUT) cut reliably? The MetavCUT Body Drill, a robust twist drill, is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics; its HSS‑G geometry is optimised for those harder materials and provides clean holes when used with correct speeds and coolant. What is a Twist Drill used for? A Twist Drill is primarily used for machining high‑strength materials and larger bore diameters; its form is easy to resharpen and it tolerates higher loads, which makes it suitable for demanding metalwork and large‑diameter holes. Which three drill types exist? The three common drill categories are metal drills, wood drills and stone/concrete drills.
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G Drill (Ø 4.2 mm, 135°) The Twist Drill is an extra long HSS‑G drill designed for deep metal drilling, offering a 135° point angle and a fully ground shank for precise work with drilling machines. Extra long geometry for deep, hard-to-reach holes 4.2 mm diameter for precise hole placement 135° point angle for stainless and hard steels HSS-G material, CNC-ground for precise holes Fully ground shank for excellent runout accuracy Faster deep drilling with less feed force Thanks to its extra long geometry and HSS‑G composition, this drill is optimised for deep holes in demanding materials. The ground spiral profile and DIN 1869 specification make it particularly suitable for alloyed and unalloyed steels, cast iron and non‑ferrous metals. The manufacturing method produces a bit that can drill up to 40 % faster and requires around 50 % less feed force compared with conventional HSS drills, which reduces operator fatigue and machine load and shortens cycle times. Precise holes and clean edges for reduced rework The CNC grinding process of the flutes yields very sharp cutting edges and high radial accuracy, so the tool produces precision bores with minimal burr and superior surface quality. Such precision lowers the need for secondary finishing and reduces scrap rates. Be aware that ground HSS bits can be less ductile than rolled types, so optimal results are obtained with appropriate speeds, steady clamping and cooling in more stationary or semi‑stationary setups. Built for workshop and industrial demands Engineered for use in a Drilling Machine, this extra long bit supports applications where standard lengths fall short, for example deep‑bore assemblies or hard‑to‑reach mounting positions. The 135° tip ensures efficient entry into harder materials, shortening punch‑through times and improving centring. For machinists and maintenance teams tackling thick workpieces, this design translates into fewer tool changes and more predictable cycle times. Practical handling, maintenance and cost advantages A fully ground shank contributes to low runout and stable clamping in chucks, while the bright finish aids visual inspection and corrosion resistance. The HSS‑G material can be resharpened, extending service life and making the tool economical for regular workshop use. Regular use of coolant and correct cutting parameters will maximise lifetime and maintain hole quality, offering a balance of durability and regrindability for professional applications. Strong recommendation: Choose the MetavCUT extra long Twist Drill for reliable deep‑hole metalworking — for technical advice or to confirm suitability for specific jobs, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 32042-FDA Diameter: 4.2 mm Overall length: 175 mm Spiral length: 120 mm Tip angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: extra long Shaft finish: fully ground Surface finish: bright finished Intended for: Drilling Machine Application: Drills for metal Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill from MetavCUT used? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger bore diameters; it is intended for deep holes and heavy‑duty applications. Its ground HSS geometry makes it suitable for alloyed and unalloyed steels, cast and sintered irons, non‑ferrous metals and hard plastics, and the design allows efficient cutting, good centring and high wear resistance under demanding conditions. Which three drill types exist? There are three common basic types of drills: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks.
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Kombination aus hoher Schnittschärfe, extra langer Ausführung und präziser Spitze sorgt für effiziente Tiefbohrungen in Stahl und Guss; Bestellen Sie den Artikel direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei Rückfragen. Spiralbohrer von MetavCUT, HSS‑G, extra lang Der Spiralbohrer ist ein extra langer HSS‑G Bohrer für präzise Tiefbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen Extra lange Bauform für tiefe Bohrungen Geschliffene HSS‑Geometrie für hohe Schnittschärfe DIN 1869 Tieflochspirale für sauberen Spantransport 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und Werkstattbetrieb Effiziente Leistung bei Metallbohrungen steigern Der HSS‑G geschliffene Spiralbohrer wurde entwickelt, um die Schnittleistung beim Bohren in Stahl und Guss zu erhöhen. Durch den CNC‑Schliff entstehen scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere Bohrlöcher und weniger Gratbildung bewirkt. Die Ausführung mit Tieflochspirale sorgt gleichzeitig für effektiven Spantransport bei längeren Bohrungen, wodurch Arbeitszyklen verkürzt werden und Nacharbeit reduziert wird. Tiefbohren sicher und kontrolliert ausführen Die extra lange Gesamtlänge in Verbindung mit 150 mm Spiralänge ermöglicht das Erreichen tiefer Bohrungen ohne mehrfaches Aufbohren. Dabei ist die Bohrermontage auf einer Handbohrmaschine möglich, da der Durchmesser im Standard‑Bereich liegt; für höchste Stabilität empfiehlt sich jedoch eine stationäre Aufnahme oder Magazinführung. Kühlung und moderates Vorschubverhalten verlängern die Standzeit erheblich. Materialeignung und Einsatzbereiche klar nutzen Der Bohrer eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und harte Kunststoffe. Der 135° Spitzenwinkel reduziert Anbohrwiderstand bei harten Werkstoffen und minimiert Wanderneigung beim Ansetzen. Werkstätten, Maschinenbauer und Instandhaltungsteams profitieren von der Kombination aus Durchmesser, Länge und robuster HSS‑G Ausführung. Handhabung, Pflege und Sicherheitsempfehlungen Beim Einsatz empfiehlt sich regelmäßige Kühlung, um thermische Belastung und Zähigkeitsverlust zu vermeiden. Da geschliffene Bohrer empfindlicher gegenüber Verkantung sind, verbessert eine vorgebohrte Zentrierung die Prozesssicherheit. Ersatzweise sind mehrstufige Aufbohrschritte für sehr tiefe Durchmesser zu empfehlen, um Bruchrisiken zu reduzieren. MetavCUT empfiehlt den Einsatz dieses HSS‑G Spiralbohrers für präzise Tiefbohrungen in Stahl und Guss; für Bestell‑ oder Anwendungsfragen kontaktieren Sie bitte info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 33042-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Material: HSS-G Ausführung: extra lang Schaft Ausführung: geschliffen Norm: DIN 1869 Fakten Durchmesser: 4,2 mm Gesamtlänge: 220 mm Spiralänge: 150 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Tieflochspirale Farbe: blank Für Bohrmaschine: Handbohrmaschine Geschliffen: hohe Schnittschärfe, präziser Rundlauf Eignung: legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle FAQ Für welche Materialien ist dieser Bohrer geeignet? Der Spiralbohrer von MetavCUT aus der Standard Line (HSS‑G, SKU 33042-FDA) eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe; für sehr zähe Werkstoffe ist angepasste Kühlung empfehlenswert. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, der MetavCUT Spiralbohrer HSS‑G (33042-FDA) mit 4,2 mm Durchmesser ist für Handbohrmaschinen geeignet, wobei bei tiefen Bohrungen Stabilisierung oder stationäre Führung die Prozesssicherheit erhöht. Wie tief kann man mit dem extra langen Spiralbohrer bohren? Die Gesamtlänge von 220 mm und die Spiralänge von 150 mm erlauben deutlich tiefere Bohrungen als Standardausführungen; die Tieflochspirale nach DIN 1869 unterstützt sicheren Spantransport bei solchen Anwendungen. Was bedeutet geschliffen beim Schaft und Material? Geschliffen (HSS‑G) beim Spiralbohrer von MetavCUT bedeutet, dass die Geometrie per CNC‑Schliff gefertigt wurde, was sehr scharfe Kanten, hohe Genauigkeit und saubere Bohrbilder zur Folge hat; gleichzeitig ist die Bruchneigung unter rauer Handhabung höher, daher Kühlung und ruhige Führung empfohlen.
4.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Drill for Drilling Machine, Ø 4.2 mm, 135°, HSS‑G, Extra‑Long, Bright Finished, DIN 1869 (MetavCUT) The Twist Drill is an extra‑long HSS‑G drill for deep metal holes, designed for use in Drilling Machines and industrial applications. Extra‑long design for deep hole drilling HSS‑G material for high cutting performance 135° point angle for hard materials Fully ground shank for high concentricity Complies with DIN 1869 for deep‑hole applications Precision and power for deep metal drilling The Twist Drill from MetavCUT is engineered as an extra‑long HSS‑G bit to reach depths that standard drills cannot. The 135° point angle reduces walking on hard materials and shortens the initial penetration time, which is especially valuable when drilling thicker plates or components made from stainless or alloyed steels. Compliance with DIN 1869 guarantees a geometry and spiral design optimised for demanding, deep‑hole applications, providing consistent results in production and workshop use. Faster machining with a ground geometry A fully ground (HSS‑G) spiral geometry yields very sharp cutting edges and excellent run‑out precision. The CNC grinding process produces a stable flute profile and clean bore surfaces; as a result, the MetavCUT bit can deliver up to 40% faster drilling and requires significantly less axial pressure compared with conventional rolled HSS drills. This translates into reduced operator fatigue and improved cycle times when used with appropriate coolant and steady fixturing. Materials and suitable applications This drill is specified for metalworking: it is suitable for legierte und unlegierte Stähle, Gray Cast Iron, Brass, Non‑Ferrous Metals and Hard Plastics within the recommended hardness limits. The extra‑long overall and working lengths make it ideal where through‑holes or deep blind holes are required and where access is limited. Use it in Drilling Machines and machine tool set‑ups that provide stable clamping and coolant flow to extend life and maintain hole quality. Handling recommendations and support For best results, secure the workpiece and use steady feed rates tailored to the material. Because ground HSS bits can be more brittle than rolled variants, avoid shock loads and always apply suitable cooling for long drilling operations. If uncertain about feeds, speeds or the correct bit for a specific alloy or thickness, METAV Werkzeuge offers comprehensive technical support and advice. Their experienced team will help choose the right tooling and operating parameters for the application. For reliable deep‑hole machining choose the MetavCUT extra‑long HSS‑G Twist Drill and request tailored machining advice from METAV Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Extra‑long) Brand: MetavCUT Diameter: 4.2 mm Point angle: 135° Execution: Extra‑long Overall length: 280 mm Spiral length: 190 mm Material: HSS‑G Shank execution: Fully ground Colour: Bright finished Model series: Standard Line Application: Drills for metal Suitable for: Drilling Machine Standard: DIN 1869 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is used primarily for drilling in metal; it is designed for deep holes and for machining high‑strength and hard materials where an extra‑long working length is required. The geometry and HSS‑G material suit alloyed and unalloyed steels, cast irons and other non‑ferrous metals. Which three drill types exist? Common drill types are metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for machining metallic materials. Why are Twist Drills point‑ground? Point grinding reduces the cross‑cut at the tip, lowering friction and required feed force. For the MetavCUT Twist Drill a ground tip improves centring and reduces radial run‑out, which results in cleaner holes and more consistent drilling under load. Can a metal Twist Drill be used in wood? A metal Twist Drill like the MetavCUT bit can be used in wood, but guidance and finish are inferior to purpose‑made wood drills. Metal drills are easier to re‑grind and have less aggressive self‑feed, so hole quality and tracking may be reduced in timber.
4.2mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 4.2 mm, 135°, Extra short, Bright finished, HSS-G, DIN 1897 by MetavCUT The Twist Drill Type N is an extra-short HSS-G metal drill designed for hand and drilling-machine use, offering increased stability and faster drilling in confined spaces. Extra-short design for higher stability HSS-G material for robust metal drilling 135° point angle for harder workpieces Cylindrical shank fits standard chucks Conforms to DIN 1897 extra-short specification Increased Precision and Faster Drilling for Metalwork The extra-short geometry of this Twist Drill improves rigidity and reduces the risk of breakage when working with thin materials or in restricted spaces. Made from HSS-G, the bit combines wear resistance with toughness, enabling up to 40% faster drilling and requiring about 50% less feed force compared with conventional HSS drills. This leads to more consistent hole quality in alloyed and unalloyed steel, cast steels and non-ferrous metals while reducing operator effort. Better Penetration in Harder Materials With a 135° point angle, this Type N Twist Drill is optimised for harder workpieces such as stainless steel and tempered materials. The flatter point reduces chipping and shortens initial contact time, so the drill centres more reliably and requires less rework. For workshops that frequently face demanding substrates, this geometry translates directly into fewer tool changes and steadier machining results. Practical Design for Hand and Angle Drills The cylindrical shank ensures universal compatibility with standard three-jaw chucks, making the bit simple to mount in typical hand or angle drilling machines. The extra-short overall length enhances torque transmission and reduces flex during manual operation, which is particularly useful when access is limited or when drilling from awkward angles. The bright finished surface eases chip evacuation and inspection. Targeted Applications and User Benefits Designed as a classic metalworking solution, the Twist Drill Type N from MetavCUT is intended for professionals and advanced hobbyists who require reliable performance on steel, cast iron, sintered materials and hard plastics. Its robustness and ease of resharpening make it a cost-effective choice for production tasks where consistent centring and longevity are priorities. Strong recommendation: For precise metal drilling tasks choose the MetavCUT Twist Drill Type N for its extra-short stability and HSS-G performance — for further technical advice or to confirm suitability for your application, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 56042-FDA Durchmesser: 4.2 mm Spitzenwinkel: 135° Typ: Type N Ausführung: extra short Farbe / Finish: Bright finished Material: HSS-G Schaftausführung: Cylindrical Gesamtlänge: 55 mm Spirallänge: 22 mm Anwendung: Drills for metal Norm: DIN 1897 Modellserie: Standard Line Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is primarily designed for metalworking; it performs well in alloyed and unalloyed steel, cast steel, sintered iron, non-ferrous metals and hard plastics, delivering reliable centring and efficient material removal. Is the MetavCUT Twist Drill Type N compatible with standard hand drills? Yes, the cylindrical shank of the MetavCUT Twist Drill Type N fits standard three-jaw chucks on most hand and angle drilling machines, enabling straightforward mounting and universal compatibility. For what is a Twist Drill used? The MetavCUT Twist Drill is mainly used for machining high-strength workpieces and larger bore diameters; its form is easy to sharpen and it withstands higher loads. Which 3 drill types exist? Common drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened? The sharpening reduces the chisel edge at the tip of the Twist Drill; by sharpening, friction forces are significantly lowered, requiring less feed force and improving centring in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood but will generally guide less well and produce a less clean hole; however, it is easier to resharpen and shows lower self-feed tendency. At what drill depths is the Twist Drill most commonly used? A through-hole is typically executed with a Twist Drill; for diameters up to 20 mm and drill depths up to 100 mm the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common belief that HSSE steels are universally superior to standard HSS is not correct; when choosing between HSS and HSSE, evaluate whether working conditions justify the higher initial cost of HSSE for your specific tasks.
4.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 4.2 mm, 135° point angle, short, bright finished, HSS‑G, DIN 338 The Twist Drill Type N is a short HSS‑G metal drill designed for precision drilling in demanding materials with a 135° point angle and a fully ground shank for high concentricity. Short design for improved stability HSS‑G geometry for precise metalworking 135° point angle for hard material entry Fully ground shank for excellent concentricity Conforms to DIN 338 for short twist drills Precision Material and Cutting Performance The short HSS‑G construction of this twist drill combines sharp cutting edges with material hardness optimised for metalworking. A ground flute geometry results in clean holes and high roundness, while the shorter overhang reduces vibration and bending. For users working with alloyed and unalloyed steel, cast steel, spheroidal graphite iron, non‑ferrous metals and hard plastics, this design translates into higher drilling speed and reduced feed force compared with conventional HSS tools. HSS‑G (ground High Speed Steel) means edges are manufactured by CNC grinding for better sharpness and hole quality. Designed for Demanding Metalwork Engineered as a Type N (normal spiral) twist drill, the 135° point angle facilitates controlled entry into harder workpieces and reduces the tendency to wander on start. This geometry shortens initial penetration time and improves centring when commencing a bore. Because the tool is a short variant, it is particularly suitable for stationary and hand‑guided drilling where stability and accuracy are critical. The cutter is therefore recommended for precision shops and maintenance tasks that require consistently round, burr‑reduced holes. Handling, Compatibility and Practical Advantages With an Overall Length of 75 mm and a Spiral Length of 43 mm, the short profile ensures a stiff setup when mounted in drill chucks. The fully ground cylindrical shank aids in secure clamping and precise run‑out on collets or chucks used in Drilling Machines and hand drills. Users will find less chatter and improved surface finish, which reduces subsequent rework. For laypersons: a fully ground shank means the shaft and flute were machined to exact tolerances rather than rolled, giving better balance and a sharper cutting geometry. Who Benefits Most from This Tool This short twist drill is aimed at professionals and advanced hobbyists who bore metals requiring repeatable accuracy—toolmakers, maintenance technicians and fabrication shops. Because the drill suits harder materials, it is less ideal for very soft woods where specialised wood bits give cleaner guidance; however, its robustness makes it versatile for many workshop applications. If precise, repeatable metal holes are your priority, this product meets those needs through focused engineering rather than general‑purpose compromise. Choose the MetavCUT Twist Drill Type N for precise metalworking and request expert technical advice from METAV Werkzeuge — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and recommendations Designation: Twist Drill (Short Twist Drill) Brand: MetavCUT SKU: 45042-FDA Diameter: 4.2 mm Point angle: 135° Type: Type N Material: HSS‑G Finish/Colour: Bright finished Execution: Short (kurz) Shank execution: Fully ground Spiral length: 43 mm Overall length: 75 mm For drilling machine: Drilling Machine / Hand Drill compatible Application: Drills for Metal Standard: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill (MetavCUT Type N) and when should it be chosen? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters; its short design and ground flutes make it suitable for precision work in steel, cast alloys and hard plastics where stability and clean hole quality are required. Which three drill types exist and how does the MetavCUT Twist Drill fit in? The three common drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill family and is optimised for metalworking rather than for timber or masonry applications.
4.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Stabile Kurz-Ausführung und TiN-Beschichtung sorgen für hohe Präzision und längere Standzeit; die geschliffene HSS-G-Geometrie ermöglicht deutlich schnelleres Bohren bei geringerem Anpressdruck. Bestellen Sie den Spiralbohrer von MetavCUT direkt über Metav oder fragen Sie unsere Beratung an. Spiralbohrer von MetavCUT (HSS-G, Typ N, SKU 46042-FDA) Der kurze HSS-G Spiralbohrer für präzise Metallbohrungen an Handbohrmaschinen und stationären Maschinen Kurze Ausführung für höhere Stabilität und weniger Vibrationen TiN-Beschichtung reduziert Reibung und erhöht Standzeit Geschliffene Geometrie für schnellere Schnittgeschwindigkeit 135° Spitzenwinkel für härtere Werkstoffe Geeignet für Handbohrmaschine und Werkstattbetrieb Höhere Stabilität durch kurze Bauweise und geschliffene Ausführung Dank der Kurz-Ausführung verringert sich die Auskraglänge deutlich, wodurch Verwölbung und Schwingungen minimiert werden. Die geschliffene Ausführung liefert eine sehr scharfe Schneidegeometrie und somit saubere Bohrlöcher bei Metall. Für Anwender bedeutet das weniger Nacharbeit und konstantere Passungen bei Serien- und Einzelteilen. TiN-Beschichtung reduziert Verschleiß und Verbesserung der Bearbeitungsleistung Die TiN-Beschichtung (Titan-Nitrid) sorgt für eine geringere Reibung an der Schnittzone und eine reduzierte Wärmeentwicklung. In Kombination mit geeigneter Kühlschmierung führt das zu deutlich längerer Standzeit und zu konstanteren Ergebnissen bei legierten und unlegierten Stählen sowie Nichteisenmetallen. Anwender profitieren von seltenerem Werkzeugwechsel und höherer Produktivität. Vielseitiger Einsatzbereich für Werkstatt und Montage Der Bohrer passt in den Standard-Bereich für Bohrdurchmesser und ist daher ideal für Werkstatt, Montage und DIY-Anwendungen in Metall. Er eignet sich für dünne bis mitteldicke Bleche, Profile und viele Stahlsorten sowie für Kupfer, Bronze und Hartkunststoffe. Bei sehr feinen Präzisionsarbeiten oder extrem gehärteten Stählen sind speziellere Werkzeuge empfehlenswert. Normgerechte Fertigung und praxisnahe Geometrie für Metall Herstellergerecht gefertigt nach DIN 338, Typ N, bietet der Bohrer eine bewährte Metallgeometrie mit 135° Spitzenwinkel, die das Anbohren von härteren Werkstoffen erleichtert. Durch den geschliffenen Zylinderschaft und die präzise Spiralgeometrie lässt sich bis zu 40 % schneller bohren bei 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS-Werkzeugen, was Ergonomie und Effizienz am Arbeitsplatz verbessert. Empfehlung: Setzen Sie auf den robusten Spiralbohrer von MetavCUT für zuverlässige Metallbearbeitung und bestellen Sie über Metav oder kontaktieren Sie unsere technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 46042-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Daten Durchmesser: 4,2 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Schaft: geschliffen (Zylinderschaft) Beschichtung: TIN-beschichtet (Titan-Nitrid) Ausführung: kurz Typ: Typ N Einsatz: Handbohrmaschine Verpackungseinheit: 10 FAQ Für welche Materialien ist dieser Spiralbohrer geeignet? Der Spiralbohrer von MetavCUT (HSS-G, Typ N, SKU 46042-FDA) eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze und Hartkunststoff. Warum ist die kurze Ausführung vorteilhaft? Die kurze Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität und Rundlaufgenauigkeit; das führt zu präziseren Bohrungen und weniger Bruchrisiko bei stationären und handgeführten Anwendungen. Welche Vorteile bietet die TiN-Beschichtung? Die TiN-Beschichtung verringert Reibung und Wärmeentwicklung, erhöht die Standzeit des Werkzeugs und verbessert die Schnittbedingungen insbesondere bei Metallbearbeitung in Kombination mit Kühlung. Ist der Bohrer für die Handbohrmaschine geeignet? Ja, der Bohrer ist für Handbohrmaschine geeignet und wurde für den Einsatz in Werkstatt und Montage konzipiert, wobei bei höheren Anforderungen an Präzision stationäre Maschinen empfohlen werden. Was bedeutet DIN 338 und geschliffen in diesem Kontext? DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft; „geschliffen“ bedeutet, dass die Schneidgeometrie durch Schleifen hergestellt wurde, was sehr scharfe Kanten und hohe Rundlaufgenauigkeit ermöglicht.
Reliable performance for daily drilling
The Standard line is a versatile series of HSS (high-speed steel) twist drills, also described as standard twist drills or precision HSS twist drills, engineered for everyday industrial and workshop use. Positioned between economy options and specialist pro-grade tools, the standard line delivers consistent, repeatable results for regular drilling tasks without the need for high-cost alloys.
How the standard line performs in practice
Designed as precision ground (HSS‑G) twist drills, the standard line combines a refined manufacture process with a classic geometry. A typical 118° tip and a cleanly formed point give good penetration and reliable centring, while extremely smooth flute surfaces support efficient chip evacuation. The result is stable running, improved hole quality and extended tool life under normal production and maintenance conditions.
Key advantages that matter on the shop floor
- Reduced rework thanks to high concentricity and precise hole quality
- Lower tool consumption through enhanced wear resistance from precision grinding
- Faster cycle times via efficient chip removal from smooth flutes
- Broad applicability across common materials: steel, cast iron, sintered metal, plastics and non‑ferrous metals
- Ideal balance of performance and cost for workshops, maintenance teams and assembly lines
Technical data
- Material: HSS (high-speed steel)
- Manufacture: precision ground (HSS-G)
- Tip angle: 118° (typical)
- Features: smooth flutes, optimised point geometry, excellent concentricity
- Applications: unalloyed steel, low-alloy steel, cast iron, sintered metal, plastics, non‑ferrous metals
Why Metav is the smart sourcing choice
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of technical know-how with a broad assortment, making high-quality measuring and workshop tools accessible to small and large operations alike. With over 48,000 customers, more than 250,000 products and a logistics hub in Emmerich, Metav offers dependable supply and a curated quality filter for the european market — the sensible route to equip your shop with standard line twist drills and complementary tooling.
FAQ
What materials are standard line twist drills suitable for?
The standard line twist drills are suitable for unalloyed and low‑alloy steel, cast iron, sintered metal, plastics and non‑ferrous metals, matching typical workshop and light industrial requirements.
How does the precision ground (HSS‑G) design benefit drilling results?
Precision ground manufacture increases concentricity and improves cutting edge finish, which leads to better hole quality, reduced vibration and longer tool life compared with roll‑formed entry‑level drills.
Are standard line drills a substitute for pro‑grade specialist drills?
Standard line drills are intended as the reliable everyday option; they deliver consistent performance for regular production and maintenance but are not a replacement when extreme loads or specialised alloys demand pro‑grade materials.
Which synonyms should procurement teams use when searching for these tools?
Search terms such as “standard twist drills”, “HSS standard drills” or “precision HSS twist drills” will reliably lead to the standard line and comparable products.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com