Reliable drilling performance with Standard Line twist drill
Standard Line twist drill and standard drills deliver consistent, precision holemaking for daily industrial and workshop use, combining durable high-speed steel construction with precision-ground flutes to ensure excellent runout and chip evacuation. Designed for machining unalloyed and low-alloy steel, cast iron, sintered metal, plastics and non-ferrous metals, these drills provide a balanced mix of wear resistance and hole quality for routine production and maintenance tasks. Ideal for workshops, maintenance departments and assembly plants, the system offers a dependable, cost-effective solution between entry-level and heavy-duty ranges, featuring an optimised 118° point for good penetration and centring. Key advantages include precision-ground construction, excellent chip evacuation and consistent hole quality.
5.5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — 5.5 mm, 135° tip, Extra Short, Bright Finished, HSS-G, DIN 1897 — by MetavCUT The Twist Drill Type N is an extra-short HSS-G metal drill designed for Hand and Angle Drilling Machines to deliver stable, high-performance holes in confined or thin-walled workpieces. Extra-short design for higher stability 135° tip for hard and alloyed steels HSS‑G material for prolonged tool life Cylindrical shank fits standard chucks Suited to hand and angle drilling in metal Greater Stability and Safer Drilling in Tight Spaces The Extra-short geometry reduces overall length while keeping the Flute and cutting geometry effective; this increases Stability and lowers the risk of breakage when working in confined areas or with thin sheets. For tasks like drilling profiles, plates or assemblies where space is restricted, the compact design translates into more controlled handling and clearer alignment, which reduces rework. The designation DIN 1897 signals conformity with the short-length variant of the standard, aiding in reliable tool selection. Faster Cutting and Lower Feed Force on Tough Materials A 135° tip and the Type N normal spiral combine to make chip formation and penetration more gradual on harder materials. The HSS‑G construction ensures toughness with good wear resistance; tests with similar ground HSS drills show up to 40% faster drilling with about 50% less feed force compared with conventional HSS blanks. This means less operator fatigue and smoother results when machining Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and Hard Plastics. Reliable Fit and Practical Use in Workshops The Cylindrical Shank is compatible with standard Three‑Jaw Chucks, so the twist drill is easy to mount in common handheld and benchtop drilling machines. With an Overall Length of 66 mm and a Flute Length of 28 mm, the geometry is optimised for typical metalworking tasks while keeping bending forces low. The bright finish simplifies chip evacuation and inspection. Note that a smooth cylindrical shank can slip under very high torque; using a well‑clamped chuck and appropriate speeds avoids this. Who Benefits from This Choice Maintenance technicians, sheet‑metal workers and general workshops will value the combination of compactness and material capability. The tool is particularly beneficial when drilling in assemblies, thin wall components or areas where a full‑length drill cannot be used. For those who need a universal, robust solution for metal drilling with easy mounting in standard chucks, this model from the Standard Line offers dependable performance. How the Technology Works — Simple Explanation for Everyday Use Type N describes the classic normal spiral suited for metalwork; the larger 135° tip angle reduces the aggressiveness of the cut, which helps with centring and decreases tool wander in tough materials. HSS‑G is a high‑speed steel grade with improved grinding quality and heat resistance compared with basic HSS, making it a pragmatic choice for general metal drilling. If centring is critical, a pilot or spot drill can be used before final hole drilling to ensure maximum accuracy. Strong recommendation: For stable, efficient metal drilling in constrained spaces choose the MetavCUT Twist Drill Type N with Extra Short execution — for personalised technical advice or to confirm fit for a specific application contact METAV Werkzeuge; comprehensive consultation is available by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical Details for Exact Matching Designation: Twist Drill Brand: MetavCUT SKU: 56055-FDA Diameter: 5.5 mm Tip Angle: 135° Type: Type N Execution / Length: Extra Short Material: HSS‑G Standard: DIN 1897 Finish / Colour: Bright Finished Shank Design: Cylindrical Overall Length: 66 mm Flute Length: 28 mm Intended Machine: Drilling Machine (Hand / Angle Drills suitable) Application: Drills for Metal Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill Type N is primarily used for drilling through high‑strength materials and for larger hole diameters in metalworking; its form allows straightforward resharpening and it endures higher loads, making it suitable for alloys, cast materials and hard plastics in workshop and maintenance environments. Which three drill types exist? Commonly differentiated drill types are Metal Drills, Wood Drills and Stone/Concrete Drills, and the MetavCUT Twist Drill falls into the metal drill category designed specifically for metalworking applications.
5.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — Short HSS-G, 5.5 mm, 135° Tip, Bright Finished The Twist Drill Type N is a short, fully ground metalworking drill designed for precision drilling in hardened materials and use with a Drilling Machine. Short design for enhanced rigidity and precision 135° tip for demanding and hardened materials HSS‑G fully ground for sharpness and clean holes Conforms to DIN 338 for standardised quality Suitable for Drilling Machine and metal applications Precision and Material Quality for Clean Metal Holes The short Twist Drill from MetavCUT is manufactured from HSS‑G, providing exceptionally sharp cutting edges thanks to CNC grinding. This fully ground shank geometry yields high roundness accuracy and produces clean, burr‑reduced holes in metal. Because the flute geometry is ground rather than rolled, users gain improved concentricity and hole quality, which is especially important when subsequent machining steps or press‑fits demand consistent tolerances. Stability and Performance for Tough Materials A reduced overall length and shorter protrusion from the chuck significantly increase stiffness and reduce deflection, making this short Twist Drill ideal for precise work in harder materials. The 135° tip is optimised for stainless steels and other tough alloys, shortening the initial bore time and improving centring. According to manufacturer data, the ground HSS design can deliver up to 40% faster drilling while requiring about 50% less feed force compared with conventional HSS drills, which directly reduces operator effort and cycle time. Application Focused: Metalworking and Machine Use Designed primarily as a metal drill, this Twist Drill (Type N) suits a wide range of ferrous and non‑ferrous materials including alloyed and unalloyed steels, cast steels, cast irons, sintered irons, non‑ferrous metals and hard plastics. Its configuration targets stationary and portable Drilling Machines where high accuracy and repeatability matter. Operators seeking reliable performance for workshop production or repair tasks will find the short axial length advantageous for minimising runout and improving tool life under controlled cooling. Handling, Limitations and Best Practices Because ground HSS drills tend to be sharper and less ductile than rolled versions, they can exhibit greater brittleness under inappropriate use. It is recommended to use adequate cooling and support, avoid excessive overhang, and prefer machine setups that limit vibration. The DIN 338 classification confirms standard dimensions and tolerances for short cylindrical‑shank twist drills, simplifying tool selection and replacement across toolholders and machines. We recommend the MetavCUT short Twist Drill Type N for demanding metalworking tasks — for personalised advice or complementary technical data contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill (Short) Brand / Manufacturer: MetavCUT SKU: 45055-FDA Diameter: 5.5 mm Tip Angle: 135° Type: Type N Colour / Finish: Bright Finished Version / Execution: Short Shank Execution: Fully Ground Material: HSS‑G Standard / Norm: DIN 338 Spiral Length: 57 mm Overall Length: 93 mm Intended Use: Drills for Metal Suitable For: Drilling Machine (Handbohrmaschine) Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters; its short design and ground geometry make it well suited to demanding metalworking tasks and produce precise, clean holes even in hard materials. Can the MetavCUT Twist Drill Type N be used in a Drilling Machine for stainless steel? Yes, the MetavCUT Twist Drill Type N with a 135° tip is especially intended for harder materials such as stainless steel, offering improved centring and reduced initial penetration time when used in a properly set up Drilling Machine. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their geometry allows relatively easy regrinding and they withstand higher loads. Which three main drill types exist? The three primary drill types are Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills sharpened at the point? Point sharpening reduces the cross‑edge at the tip of the Twist Drill, which substantially lowers friction and therefore requires less feed force; at the same time the sharpened tip centres the drill more reliably in the workpiece. Can metal Twist Drills be used to drill wood? Metal Twist Drills can be used in wood, but they typically provide poorer guidance and a less clean hole compared with dedicated wood drills; however, they are easier to resharpen and show less self‑feeding.
5.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Der kurze, TIN-beschichtete HSS-G Spiralbohrer überzeugt durch höhere Stabilität und längere Standzeit; die geschliffene Ausführung sorgt für saubere Bohrbilder und bis zu 40 % schnellere Vorschübe. Für Präzisionsarbeiten in Metall empfiehlt sich der Einsatz mit geeigneter Kühlung; Bestellung und Beratung direkt über Metav Werkzeuge möglich. Spiralbohrer 5,5 mm »Standard Line« von MetavCUT (HSS-G, kurz) Der Spiralbohrer 5,5 mm ist ein kurzer, geschliffener HSS-G Metallbohrer für präzise Bohrungen in legierten und unlegierten Stahl sowie Nichteisenmetallen. Kurz-Ausführung für hohe Stabilität TIN-Beschichtung reduziert Verschleiß deutlich Geschliffene Geometrie für saubere Bohrlöcher 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Höhere Standzeit durch beschichtete HSS-Werkstoffkombination Die Kombination aus HSS-G (Schnellarbeitsstahl, geschliffen) und Titan-Nitrid-Beschichtung reduziert Reibung und Verschleiß bei Metallbohrungen. Dadurch verbessert sich die Lebensdauer des Bohrers und die Standzeit bei Serien- und Einzelanwendungen. Ein unmittelbarer Kundenvorteil ist die geringere Werkzeugwechselrate, die Stillstandszeiten und Nacharbeit reduziert. Kurze Auskraglänge für präzisere Bohrungen in Metall Durch die kurze Ausführung steigt die Steifigkeit des Bohrers, die Führungsgenauigkeit verbessert sich und das Verbiegen wird minimiert. Für Anwender bedeutet das weniger Ausschuss und schnelleres, sichereres Arbeiten bei anspruchsvollen Werkstoffen wie legierten Stählen und Temperguss. Der Bohrer ist daher ideal für Werkstatt, Montage und stationäre Maschinen. Geschliffene Geometrie und Spitzenwinkel erklären Die geschliffene Fertigung (HSS-G) sorgt für scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was sich in sauberen Bohrungen niederschlägt. Der 135° Spitzenwinkel ist speziell für harte Werkstoffe ausgelegt: Er reduziert Anlaufkräfte und verringert das Risiko des Wanderns beim Anbohren. Erklärung: Geschliffen bedeutet, die Spannuten werden per CNC geschliffen und nicht rollgewalzt, was Präzision auf Kosten etwas höherer Sprödigkeit bringt. Anwendungsempfehlung und Einsatzbereich Dieser Bohrer entspricht der DIN 338 und ist als Typ N (Normalspirale) für allgemeine Metallbearbeitung ausgelegt. Er eignet sich besonders für Handbohrmaschine und stationäre Bohrmaschinen bei Werkstatt- und Montagearbeiten. Zur Optimierung von Standzeit und Bohrbild empfiehlt sich ein geeignetes Kühlsystem sowie angepasste Schnittgeschwindigkeit je nach Material. Empfehlung: Den MetavCUT Spiralbohrer 5,5 mm für präzise Metallbohrungen wählen und bei technischen Fragen die Beratung von Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 in Anspruch nehmen Technische Daten Artikelnummer: 46055-FDA Marke: MetavCUT Serie: Standard Line Fakten Durchmesser: 5,5 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Beschichtung: TIN-beschichtet (Titan-Nitrid zur Verschleißreduzierung) Schaftausführung: geschliffen Ausführung: kurz Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Typ: Typ N (Normalspirale) FAQ Für welche Materialien ist der Spiralbohrer geeignet? Der MetavCUT Spiralbohrer 5,5 mm aus HSS-G mit TIN-Beschichtung eignet sich für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie Nichteisenmetalle wie Kupfer und Bronze. Ist der Bohrer für Handgeführte Maschinen geeignet? Ja, der Spiralbohrer 5,5 mm ist für Handbohrmaschine geeignet; die kurze Ausführung erhöht dabei die Stabilität und verringert das Verbiegen. Welche Vorteile bietet die TIN-Beschichtung konkret? Die TIN-Beschichtung des MetavCUT Bohrers reduziert Reibung, senkt Verschleiß und verlängert die Standzeit, besonders bei Bohrungen in harten Werkstoffen. Wodurch unterscheidet sich die geschliffene Ausführung? Geschliffene HSS-G Bohrer bieten schärfere Kanten und höhere Rundlaufgenauigkeit, was zu präziseren Bohrlöchern führt; sie sollten bevorzugt stationär oder mit passender Kühlung eingesetzt werden. Welche Norm und Typenbezeichnung hat der Bohrer? Der Bohrer entspricht DIN 338 und ist als Typ N (Normalspirale) klassifiziert; die SKU lautet 46055-FDA.
5.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Der Spiralbohrer von MetavCUT verbindet hohe Präzision mit robuster Ausführung: Die HSS-G-Legierung und die lange Ausführung nach DIN 340 ermöglichen saubere Tiefbohrungen in Stahl und Guss, während der 135° Spitzenwinkel das Anbohren harter Werkstoffe erleichtert. Nutzen Sie die Kombination aus schneller Spanabfuhr und stabiler Führung für zuverlässige Ergebnisse und bestellen Sie den Bohrer bequem über Metav Werkzeuge oder lassen Sie sich bei Bedarf technisch beraten. Spiralbohrer von MetavCUT – HSS-G, lange Ausführung (DIN 340) Der Spiralbohrer ist eine lange, geschliffene HSS-G Ausführung für präzise Tiefbohrungen in legierten und unlegierten Metallen. HSS-G geschliffen für präzise Metallbohrungen Lange Ausführung nach DIN 340 für tiefe Bohrungen Spitzenwinkel 135° für harte Werkstoffe Spirallänge 91 mm für effektive Spanabfuhr Geeignet für Handbohrmaschine und stationäre Maschinen Höhere Schnittleistung durch geschliffene HSS-G Qualität Die geschliffene HSS-G-Geometrie bietet sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was das Bohren in Stahl und Guss deutlich verbessert. Aufgrund des CNC-Schliffs wird die Anbohrphase verkürzt und die Bohrung wird sauberer. Technisch bedeutet das: bis zu 40 % schnellere Bohrzyklen und etwa 50 % geringere Anpresskraft im Vergleich zu walzgeformten Standardbohrern, was Arbeitszeit und Bedieneraufwand reduziert. Sichere Anwendung bei tiefen Bohrungen und schwierigen Zugängen Die lange Ausführung gemäß DIN 340 mit einer Spirallänge von 91 mm ist speziell für tiefere Bohrungen und schwer zugängliche Stellen konzipiert. In Kombination mit dem 135° Spitzenwinkel ist der Bohrer besonders für härtere Werkstoffe geeignet. Für präzise Ergebnisse wird vor allem bei hoher Genauigkeitsanforderung das Anpunkten mit einem Zentrierbohrer empfohlen; für den normalen Werkstattgebrauch ist direktes Bohren möglich. Praxisnahe Hinweise zur Handhabung und Lebensdauer Der geschliffene Schaft verlangt eine ruhige Spannaufnahme und geeignete Kühlung, um die Bruchsicherheit zu erhöhen. Empfehlenswert ist der Einsatz von Kühlschmierstoff bei Stahl und Guss, damit die Schnittstelle kühl bleibt und die Standzeit maximiert wird. Die robuste HSS-G-Legierung empfiehlt sich für Werkstätten, die eine verlässliche Kombination aus Standzeit und Schneidleistung suchen. Für wen sich dieses Spiralwerkzeug eignet Dieser Bohrer richtet sich an Werkstattbetreiber, Instandhalter und ambitionierte Heimwerker, die tiefere Metallbohrungen mit hoher Genauigkeit benötigen. Die lange Ausführung macht ihn besonders nützlich bei Bohrbuchsen, Reparaturarbeiten und beim Bohren in Bauteilen mit begrenztem Zugang. Die Verarbeitung nach DIN 340 sorgt für planbare Ergebnisse in Serien- und Reparaturanwendungen. Empfehlung: Den MetavCUT HSS-G Spiralbohrer in langer Ausführung direkt über Metav beziehen — bei technischen Fragen steht die Beratung unter info@metav-werkzeuge.com zur Verfügung und der Versand erfolgt zuverlässig ab Emmerich. Produktmerkmale Artikelnummer: 53055-FDA Marke: MetavCUT Serie: Standard Line Fakten Durchmesser: 5,5 mm Gesamtlänge: 139 mm Spirallänge: 91 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Hochleistungs-Schnellstahl, geschliffen) Norm: DIN 340 (lange Ausführung für tiefere Bohrungen) Schaftausführung: geschliffen (vollständig geschliffener Schaft für hohe Rundlaufgenauigkeit) Ausführung: lang (längere Gesamtlänge und Spirallänge) Farbe: blank (helles Oberflächenfinish) Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer in HSS-G Ausführung und mit 135° Spitzenwinkel eignet sich für viele harte Werkstoffe, einschließlich bestimmter Edelstähle; für sehr zähe Werkstoffe sind angepasste Schnittwerte und Kühlung erforderlich. Kann man ohne Vorbohren direkt auf Maß bohren? Bei einem Durchmesser von 5,5 mm ist direktes Bohren möglich; für höchste Präzision empfiehlt sich jedoch das Anpunkten oder Vorbohren mit einem Zentrierbohrer, besonders bei Serienbohrungen mit dem MetavCUT Spiralbohrer. Wie verlängere ich die Standzeit des Bohrers? Die Standzeit des HSS-G Spiralbohrers lässt sich durch Einsatz von Kühlschmierstoff, passende Drehzahl und eine ruhige Spannaufnahme deutlich erhöhen. Eignet sich der Bohrer für Handgeführte Maschinen? Ja, der MetavCUT Spiralbohrer ist für Handbohrmaschine geeignet; bei tiefen oder sehr harten Bohrungen empfiehlt sich jedoch der Einsatz stationärer Maschinen zur Minimierung von Bruchrisiken. Welche Vorteile bietet die lange Ausführung nach DIN 340? Die lange Ausführung ermöglicht Zugänglichkeit zu innenliegenden Bohrstellen und sichere Spanabfuhr bei Tiefbohrungen, was den MetavCUT Spiralbohrer besonders vielseitig macht.
5.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — HSS short, Ø 5.6 mm, 118° tip, black, DIN 338, short execution The Twist Drill Type N is a short HSS metal drill engineered for precision drilling in metal with a 5.6 mm diameter and a 118° tip suitable for drilling machines and hand drills. Short HSS design for increased stability Conforms to DIN 338 for short twist drills 118° tip for improved centring in metal 5.6 mm diameter for standard hole sizes Precision and stable performance for metalworking The Twist Drill from MetavCUT delivers reproducible results when working with metal thanks to its HSS composition and short geometry. The reduced overhang improves Stability and reduces vibration during cutting, which leads to cleaner Holes and less tool deflection. For metalworking applications where accuracy matters, the short design offers higher rigidity than longer drills and helps maintain concentricity even under varying feed conditions. Material and norm advantages for reliable use Manufactured in HSS, this short Type N drill is aligned with DIN 338, which defines short twist drills with cylindrical shank for metalworking. The 118° Tip provides a balance between fast penetration and good centring on slightly softer Metals and general Steel grades. The roll-formed or ground production options described by the norm ensure consistent geometry and simplify resharpening when required, supporting long-term usability and predictable drilling behaviour. Intended applications and who benefits most Designed primarily as a metalworking tool, the Type N geometry suits workshops, maintenance teams and professionals who use drilling machines or hand drills for steel, cast Iron and non-ferrous Metals. Its 5.6 mm diameter makes it appropriate for typical assembly and fabrication tasks where precision holes are required. Users seeking a robust, easy-to-handle drill for repetitive metal drilling will value the combination of short length and HSS material for a lower risk of breakage on small-diameter holes. Handling, sharpening and practical notes The shorter overall length reduces chatter and supports accurate axial guidance; this makes the drill easier to control in portable and stationary machines. When sharpening the point, preserving the 118° geometry maintains the intended cutting behaviour: reduced thrust and improved centring. For the best results, apply suitable cutting fluid and moderate feeds when drilling harder alloys to extend tool life. Regular inspection of the cutting lips will indicate when resharpening is needed to restore performance. We strongly recommend the MetavCUT Twist Drill Type N for precision metalworking — for personalised technical advice or to confirm suitability contact METAV Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Twist Drill Marke: MetavCUT SKU: 40056-FDA Durchmesser: 5,6 mm Spitzenwinkel: 118° Spirallänge: 57 mm Gesamtlänge: 93 mm Typ: Type N Ausführung: short Farbe: black Material: HSS Norm: DIN 338 Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily used for metalworking tasks; as a short HSS drill it is suitable for drilling in alloyed and unalloyed Steel, Cast Iron and various Non-Ferrous Metals where stability and precision are required. Can the MetavCUT Twist Drill Type N be used in a hand drill? Yes, the MetavCUT Twist Drill Type N is compatible with drilling machines and can be used in many Hand Drill applications, though the short design is particularly advantageous in stationary setups or where minimal overhang is needed. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high-strength materials and larger drill diameters; this shape is relatively easy to resharpen and withstands higher loads during drilling. Which three drill types exist? There are three common drill categories: Metal drill, Wood drill, and Stone/Concrete drill. Why are Twist Drills sharpened? Sharpening reduces the cross-cutting edge at the Tip of the Twist Drill, which lowers friction forces and therefore reduces the required feed force while improving centring in the Workpiece. Can you drill wood with a Twist Drill? A Metal Twist Drill can be used in Wood, but it offers poorer guidance and a less clean finish compared with dedicated Wood drills; however, such drills are simpler to resharpen and exhibit lower self-feeding tendencies. At which drilling depths is the Twist Drill most used? A full through-hole is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The common belief that HSSE steels are categorically superior to standard HSS is not universally true; evaluate whether the specific working conditions justify the higher purchase cost of HSSE before choosing.
5.6mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Die Kombination aus HSS-G-Material und Doppelendbohrer-Konstruktion liefert schnelle, präzise Bohrergebnisse bei Blech- und Karosseriearbeiten; die 5,6 mm-Ausführung überzeugt durch Stabilität und einfache Handhabung. Für gezielte Beratung oder Direktbezug steht Metav als verlässlicher Partner bereit. Karosseriebohrer »58056-FDA« von MetavCUT Der Karosseriebohrer »58056-FDA« ist ein doppelseitiger, geschliffener Spiralbohrer für präzise Metall- und Blechbohrungen mit 135° Spitzenwinkel. Karosseriebohrer »58056-FDA« von MetavCUT Doppelendbohrer, beidseitig einsetzbar HSS-G geschliffen für saubere Metallbohrungen 5,6 mm Durchmesser, Standard-Bereich geeignet 135° Spitzenwinkel für härtere Werkstoffe Hohes Tempo und saubere Bohrbilder durch geschliffenes HSS-G Der HSS-G-Werkstoff kombiniert Härte mit Schnittqualität und ermöglicht ein bis zu 40 % schnelleres Bohren bei reduziertem Anpressdruck. Geschliffene Geometrie sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stählen, Gusseisen sowie Nichteisenmetallen ergibt. Als Vorteil bleibt weniger Nacharbeit an den Kanten erforderlich. Kompakte Doppelendkonstruktion für effektiven Werkzeugeinsatz Als Doppelendbohrer ausgeführt, bietet der Bohrer de facto zwei Nutzseiten in einem Werkzeug, was Lageraufwand reduziert und Stillstandzeiten minimiert. Die kurze, stabile Bauform unterstützt präzises Anbohren in Dünnblech und Karosseriebauteilen. Die Spirallänge von 16 mm begünstigt effiziente Spanabfuhr bei flachen bis mitteltiefen Bohrungen. Geeignet für mobile Werkstätten und Standard-Anwendungen Mit 5,6 mm Durchmesser fällt der Bohrer in den Standard-Bereich und ist damit ideal für Werkstatt, Montage und Handhabung mit einer Handbohrmaschine. Für dünne bis mittlere Bleche, Profile und Allgemeinbearbeitung ist die Ausführung sehr gut geeignet; bei besonders hoher Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer zur Vermeidung von Wandern. Hinweise zur Anwendung und Pflege für längere Standzeiten Der 135° Spitzenwinkel erleichtert das Eindringen in härtere Werkstoffe und reduziert das Anlaufverhalten, jedoch kann geschliffenes HSS spröder reagieren als gewalztes Material. Kühlung während des Bohrens verlängert die Lebensdauer und verhindert Überhitzung; moderater Vorschub sorgt für saubere Spanbildung. Bei anspruchsvollen Serienaufgaben ist der Einsatz stationärer Maschinen empfehlenswert. Empfehlung: Für zuverlässige Blech- und Karosseriearbeiten den Karosseriebohrer von MetavCUT aus der Standard Line wählen; Bestellung und technische Beratung über Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Technische Daten Artikelnummer: 58056-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Karosseriebohrer Fakten Durchmesser: 5,6 mm Gesamtlänge: 66 mm Spirallänge: 16 mm Spitzenwinkel: 135° Besonderheiten Ausführung: doppelseitig Material: HSS-G (geschliffen) Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 FAQ Ist dieser Bohrer für Edelstahl geeignet? Der Karosseriebohrer »58056-FDA« von MetavCUT ist mit 135° Spitzenwinkel für härtere Werkstoffe ausgelegt und eignet sich für viele Edelstahlarten, wobei Kühlung und angepasste Schnittparameter empfohlen werden. Wie oft kann die zweite Spitze genutzt werden? Die doppelseitige Ausführung ermöglicht die Nutzung der zweiten Spitze solange die Schneiden noch intakt sind; bei deutlicher Verschleißerscheinung sollten die Kanten nachgeschliffen oder der Bohrer ersetzt werden. Passt der Bohrer in handelsübliche Akkubohrmaschinen? Ja, die Geometrie und der Durchmesser machen den Bohrer geeignet für Handbohrmaschinen und mobile Anwendungen im Standard-Bereich. Wofür ist die Spirallänge von 16 mm geeignet? Die Spirallänge von 16 mm ermöglicht effiziente Spanabfuhr bei flachen bis mitteltiefen Bohrungen in Blech und Profilen; für sehr tiefe Löcher sind andere Ausführungen empfehlenswert. Wird der Bohrer geschliffen oder gewalzt geliefert? Der Bohrer ist geschliffen (HSS-G), was für scharfe Kanten und hohe Präzision sorgt, aber erhöhte Vorsicht bei Biegebeanspruchung erfordert.
5.6mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 5.6 mm, 135° tip, extra short, Bright finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill Type N extra short by MetavCUT is a compact HSS‑G metalworking bit optimised for hand and drilling machines, designed for precise, high‑stability drilling in tougher materials. Extra‑short design for greater stability HSS‑G material for faster metal drilling 135° tip for harder materials like stainless steel Cylindrical shank fits standard three‑jaw chucks Increased performance through HSS‑G construction The HSS‑G material offers improved cutting performance compared with conventional HSS, enabling up to 40% faster drilling while requiring significantly less feed force. This results in reduced operator fatigue and more consistent hole quality when working with alloyed and unalloyed steels, cast materials and non‑ferrous metals. For users who value speed and durability, the hardened high‑speed steel composition is a decisive advantage. Stability and safety from the extra‑short geometry Because the bit is extra short relative to DIN 1897 standards, the reduced overall length and shorter flute length increase rigidity and lower the risk of breakage. This geometry is particularly beneficial when drilling in thin sheets or confined spaces, where a long overhang would cause vibration or chatter. The compact form factor therefore improves centring and repeatability for precision tasks. Tip geometry and shank: better entry and universal clamping A 135° tip angle reduces the tendency to wander on hard surfaces and shortens pilot time when penetrating tougher materials like stainless steel. The cylindrical shank ensures universal compatibility with standard three‑jaw chucks, allowing quick changes in common hand and bench drilling setups. For high‑torque applications, users should verify chuck grip to avoid slippage. Practical applications and user guidance This extra‑short Twist Drill (Type N) is aimed at mechanics, maintenance technicians and metalworkers who need reliable, compact drills for production or repair work. It is particularly suited to drilling in steel, cast iron, sintered iron and hard plastics. For best results, use appropriate cutting fluid on harder alloys and moderate speeds to prolong tool life and ensure cleaner holes. We recommend the MetavCUT extra short HSS‑G Twist Drill for precision metalworking and confined‑space drilling; for personalised technical guidance or application support contact METAV Werkzeuge — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 56056-FDA Diameter: 5.6 mm Total length: 66 mm Spiral length: 28 mm Tip angle: 135° Type: Type N Execution: extra short Colour / Finish: Bright finished Material: HSS‑G Shank design: Cylindrical Standard: DIN 1897 Intended use: Drills for metal / Drilling Machine compatibility (Hand Drilling Machine) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill Type N extra short suitable for stainless steel? The MetavCUT Twist Drill Type N extra short is designed with a 135° tip specifically to improve entry into harder materials such as stainless steel; combined with HSS‑G material this makes it well suited for such applications when used with appropriate cutting fluid and speeds. Can the MetavCUT Twist Drill be used in a standard hand drill? Yes, the MetavCUT Twist Drill Type N extra short features a cylindrical shank that fits standard three‑jaw chucks, making it compatible with most hand and bench drilling machines; ensure firm chuck clamping to prevent slippage under higher torque. What are twist drills used for? Twist Drills are primarily used for machining high‑strength materials and larger hole diameters. They are relatively easy to re‑grind and withstand higher loads, which makes them suitable for demanding metalworking tasks. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are twist drills sharpened (pointed)? Sharpening reduces the cross‑edge at the tip of the Twist Drill, significantly lowering friction and required feed force while improving centring accuracy in the workpiece. Can a metal twist drill be used for wood? A metal twist drill can be used in wood, but it generally provides poorer guidance and a less clean hole than a dedicated wood bit; however, it is easier to re‑grind and exhibits less self‑feeding. For which drilling depths is the twist drill most commonly used? A full‑bore hole is commonly made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common belief that HSSE steels are inherently superior to HSS is incorrect. When choosing, consider whether the specific working conditions justify the higher purchase price of HSSE.
5.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N, 5.6 mm, 135° Tip, HSS‑G, Bright Finished The Twist Drill short Type N is a precision metalworking drill bit for Drilling Machine use, designed for stable, high‑performance drilling in hard and alloyed metals. Short design for higher stability and precision Fully ground shaft for excellent runout accuracy 135° tip angle optimised for hard materials Conforms to DIN 338 for short HSS twist drills Bright finished surface for corrosion resistance and visual inspection Reliable high‑speed performance for demanding metalwork The HSS‑G construction of this short Twist Drill delivers high cutting performance and durability when machining steels, cast iron and non‑ferrous metals. The ground flute geometry produces clean, precise holes and allows up to 40% faster drilling with roughly 50% less feed force compared with conventional HSS variants, making it particularly efficient for production tasks where time and tool life matter. The compact overall length reduces chatter and bending, improving hole quality in tougher materials. Greater stability and centring for exact bores A shorter projection from the chuck gives this short Type N bit superior stability and reduced deflection, which is essential when drilling tight‑tolerance holes. The 135° tip angle lowers the initial entry forces and helps the drill to centre better in hard workpieces such as stainless steel. The typical “normal spiral” Type N geometry is intended for metal applications and balances chip evacuation with cutting action for reliable, repeatable results. Designed for workshop and industrial applications Manufactured to DIN 338, this Twist Drill is intended for use in both stationary and portable Drilling Machines in metalworking shops, tool rooms and maintenance departments. The fully ground shank ensures precise seating in the chuck and minimises runout, while the bright finished surface facilitates visual inspection for wear. This combination makes the bit suitable for professionals who prioritise accuracy and predictable performance. Practical handling, sharpening and limitations As a ground HSS tool, the bit offers very sharp cutting edges and high roundness, enabling neat bores and easier re‑grinding when resharpening is required. For best results and longevity, use appropriate coolant during prolonged cutting in hardened materials and avoid dry, high‑speed drilling without suitable machine stability. Although the Type N Twist Drill can be used in non‑metal materials, it is optimised for metals; for woodworking or masonry, specialised bits remain recommended. Strong recommendation: Choose the MetavCUT short Twist Drill for precision metal drilling and contact METAV Werkzeuge for expert advice — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 45056-FDA Type: Typ N (Type N) Diameter: 5.6 mm Tip angle: 135° Material: HSS-G Execution: Short (kurz) Surface/Colour: Bright finished (blank) Shaft finish: Fully ground (geschliffen) Spiral length: 57 mm Overall length: 93 mm For machine: Drilling Machine (Handbohrmaschine) Norm: DIN 338 Model series: Standard Line Application: Drills for metal Designation (English): Twist Drill Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill from MetavCUT primarily used? The MetavCUT Twist Drill short Type N is mainly applied to the machining of high‑strength materials and for larger hole diameters; its short projection offers improved stability and precision. The ground geometry is easier to resharpen and withstands higher loads, making it suitable for drilling alloyed and unalloyed steels, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill falls into the metal drill category and is optimised for metalworking tasks.
5.75mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill (Type N) – HSS short, 5.75 mm, 118° tip, black, DIN 338 The Twist Drill Type N is a short HSS drill bit designed for metalworking, offering precise 5.75 mm holes with a 118° tip for reliable centring in handheld and machine drilling applications. Short HSS design for increased stability 5.75 mm diameter for precise metal holes 118° tip for reliable centring on curved surfaces Conforms to DIN 338 for short twist drills Type N spiral optimized for metal drilling Precision and durability for metalworking tasks This Twist Drill is manufactured from HSS (High Speed Steel) to deliver consistent cutting performance in metalworking. The short execution and firm geometry reduce deflection and vibration, which improves hole accuracy and prolongs tool life compared with longer variants. The 5.75 mm nominal diameter and classic Type N spiral make this bit particularly suitable for drilling unalloyed and alloyed steels, cast iron and various non-ferrous metals. The DIN 338 designation confirms the design as a short spiral drill with a cylindrical shank, intended for use in both stationary machines and portable drilling machines. Stability and handling advantages of the short design A reduced overhang from the chuck yields measurable benefits in everyday workshop use: the shorter flute length (57 mm) and overall length (93 mm) improve centring and reduce walking at the start of the hole, while increasing rigidity during plunge. For operations where precision is critical, such as aligning multiple holes or working on small assemblies, the compact geometry of this Type N bit helps achieve repeatable results. The black finish provides visual contrast for quick size identification and handling in busy toolboxes. Suitable applications and target users MetavCUT’s Twist Drill is aimed at professional machinists, maintenance technicians and skilled hobbyists who require dependable performance on metal. It is intended for through-holes and general drilling tasks in metal components, and is suitable for use with handheld drilling machines as well as bench and column drills. Because the bit follows the DIN 338 standard for short drills, it is a practical choice when higher stability and positional accuracy are priorities over deep drilling. How the geometry and point angle affect performance The 118° tip angle is a versatile compromise that eases initial centring and reduces walking on slightly curved or soft surfaces, while maintaining effective cutting for many metal types. Point geometry determines how the bit enters the material: by shaping the tip to the appropriate angle and relief, cutting forces and friction are reduced, which lowers feed requirements and improves centring. Short HSS bits of the Type N family can be resharpened with conventional tools and are robust under standard workshop conditions. Choose MetavCUT’s Twist Drill for precise, stable metal drilling and contact METAV Werkzeuge for tailored technical advice — Email: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 400575-FDA Diameter: 5.75 mm Tip Angle: 118° Type: Type N Material: HSS (High Speed Steel) Execution: Short Colour: black Spiral Length: 57 mm Overall Length: 93 mm Application: Drills for Metal Standard: DIN 338 Suitable For: Drilling Machine / Hand Drill Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily employed for machining high-strength materials and larger drill diameters; its design is easy to regrind and withstands greater loads, making it suitable for through-holes and demanding metal-drilling tasks. Which three drill types are there? The three main drill types are metal drill bits, wood drill bits and stone/concrete drill bits; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for cutting steel and similar materials.
5.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — Type N short, 5.75 mm, 135°, Bright finished, HSS-G, DIN 338 The MetavCUT Twist Drill (Type N, short) is a precision HSS-G drill designed for stable, high-performance metal drilling in handheld and machine setups. Short design for increased stability HSS-G fully ground for sharp holes 135° Point angle for hard metals Suited for Drilling Machine use in metal Conforms to DIN 338 for standard reliability Precision and force: ideal for demanding metal drilling This short Twist Drill combines a 5.75 mm Diameter with a 135° Point Angle to reduce punch-in and improve guidance when working with hard materials. The HSS‑G (Ground High Speed Steel) material produces very sharp cutting edges after CNC grinding, resulting in clean, round holes and excellent concentricity. For operators this means fewer reworks and a consistently high hole quality when drilling steel, cast iron or alloyed metals. Short length for stability and control A shorter overall Length and reduced projection deliver measurable advantages: the reduced overhang lowers the risk of bending and chatter, which improves hole accuracy and tool life. The fully ground Shank ensures precise clamping in the chuck and consistent Runout. As a result, the short Type N design is particularly suited to precision tasks and machine-mounted operations where stiffness and repeatable performance matter. Material suitability and recommended use cases The MetavCUT Twist Drill is optimised for metalworking: suitable for alloyed and unalloyed steel, cast and spheroidal graphite iron, non‑ferrous metals and hard plastics. The 135° tip is chosen for tougher materials because it shortens the initial bite and reduces axial forces. When working with stainless steel or other high‑strength alloys, use appropriate coolant and moderate speeds to preserve sharpness and avoid work hardening. Practical tip and maintenance advice for longer life Because these drills are ground rather than rolled, occasional regrinding is straightforward and restores the original geometry. Regrind to maintain the 135° Point Angle and symmetrical cutting lips to keep hole quality high. For best results in production settings, clamp the workpiece securely, use proper coolant and select feed and speed according to material charts—this reduces wear and prevents premature breakage. For precision metalworking choose the MetavCUT Twist Drill short Type N with HSS‑G grinding — and contact METAV Werkzeuge for tailored technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Twist Drill Brand: MetavCUT SKU: 450575-FDA Diameter: 5.75 mm Spiral Length: 57 mm Overall Length: 93 mm Point Angle: 135° Type: Type N Execution: short Shank Finish: fully ground Surface/Colour: bright finished Material: HSS-G Standard: DIN 338 Application: Drills for metal Suitable For: Drilling Machine, Hand Drilling where machine stability is provided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N, short, HSS‑G) is primarily used for machining high‑strength materials and larger drill diameters; its ground geometry allows precise drilling in metals and hard plastics while withstanding greater loads. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is engineered for that application. Why is the MetavCUT Twist Drill supplied with a 135° point angle? The 135° Point Angle reduces axial entry force and improves centring in hard materials, which helps decrease Anbohrzeit and delivers a cleaner start hole when drilling stainless steels and other tough alloys. Can the MetavCUT Twist Drill be used for drilling wood? The MetavCUT Twist Drill can be used in wood, but it offers less guidance and a rougher finish compared with specialised wood bits; it is easier to resharpen and shows lower self‑feed characteristics than dedicated wood drills. If you are unsure whether this tool fits your requirements or need additional technical data, METAV Werkzeuge offers comprehensive consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
5.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Hohen Stabilität und präzise Ergebnisführung bietet diese kurze Ausführung dank HSS-Werkstoff, DIN 338-Norm und dem 5,7 mm Durchmesser; ideal für Metallbohrungen mit Handbohrmaschine. Bestellen Sie den Bohrer direkt über Metav oder lassen Sie sich von unserer technischen Beratung unterstützen. Spiralbohrer 40057-FDA von MetavCUT — kurzer HSS-Bohrer für Metall Der Spiralbohrer 40057-FDA ist ein kurzer HSS-Bohrer (Typ N) mit 5,7 mm Durchmesser, konzipiert für präzise Metallbohrungen an Handbohrmaschinen. Kurze Ausführung nach DIN 338 HSS-Material reduziert Bruchrisiko bei <6 mm Geeignet für Handbohrmaschine Spitzenwinkel 118° für sauberen Anbohrvorgang Verpackungseinheit: 10 Stück Stabilität und Präzision für anspruchsvolle Metallbohrungen Die kurze Ausführung dieses Bohrers reduziert die Auskraglänge und erhöht damit die Stabilität beim Bohren in Metall. Durch den Einsatz von HSS (Schnellarbeitsstahl) bleiben die Schneiden elastisch, was besonders bei Durchmessern unter 6 mm das Bruchrisiko mindert. In Kombination mit der Norm DIN 338 steht die Bauart für konsistente Abmessungen und zuverlässige Einsetzbarkeit an stationären und handgeführten Maschinen. Materialtechnik und Spitzengeometrie sorgen für saubere Löcher Der Bohrer nutzt die typische Geometrie der Typ N Normalspirale, die speziell für Metall ausgelegt ist. Der Spitzenwinkel 118° ermöglicht ein leichtes Anbohren und saubere Spanbildung in Baustahl, Gusseisen, Nichteisenmetallen und Kunststoffen. Für Anwender mit geringer Maschinenpräzision empfiehlt sich ein Anpunkten oder Zentrieren vor dem Bohren, um ein „Wandern“ des Bohrers zu vermeiden und die Bohrbildqualität zu sichern. Praxisnahe Anwendungsempfehlungen für die Werkstatt Für den Einsatz mit Handbohrmaschine ist der Spiralbohrer 40057-FDA optimal abgestimmt: der Durchmesser von 5,7 mm fällt in den Standard-Bereich und erlaubt direktes Bohren bei mittleren Werkstoffen. Kühlung oder Schmierstoff kann bei zähen Legierungen die Standzeit erhöhen und die Spanabfuhr verbessern. Bei anspruchsvollen Werkstücken empfiehlt sich Leichtdruck und hohe Drehzahl, um thermische Überlastung zu vermeiden. Zielgruppe und Einsatzszenarien Dieser Bohrer richtet sich an Werkstattbetreiber, Monteure und ambitionierte Heimwerker, die häufig Metall bearbeiten. Die kurze Bauform unterstützt präzises Arbeiten an Flachmaterial und Profilen, die Verpackungseinheit von 10 Stück macht die Beladung von Vorratsschränken wirtschaftlich attraktiv. MetavCUT positioniert das Werkzeug als robuste, zuverlässige Lösung für den Alltag in Industrie und Handwerk. Empfehlung: Für dauerhaft präzise Metallbohrungen die Wahl des HSS-kurzbohrers von MetavCUT treffen und bei technischen Fragen unsere Beratung kontaktieren: info@metav-werkzeuge.com • Tel. +49 2822 7131930 • WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 40057-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Material: HSS Norm: DIN 338 Typ: Typ N Ausführung: kurz Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Fakten Durchmesser: 5,7 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Spitzenwinkel: 118° Besonderheiten HSS: Schnellarbeitsstahl, elastisch, bruchreduziert DIN 338: kurze Spiralbohrer mit Zylinderschaft (Norm) Typ N: Normalspirale, ausgelegt für Metallbearbeitung FAQ Ist der Bohrer für Edelstahl geeignet? Der Spiralbohrer 40057-FDA von MetavCUT (HSS, Typ N) eignet sich für viele Stahlarten; bei rostfreien, harten Werkstoffen empfiehlt sich langsame Schnittgeschwindigkeit und geeignete Kühlung. Kann ich den Bohrer in einer Handbohrmaschine verwenden? Ja, der kurze HSS-Bohrer wurde für die Nutzung an Handbohrmaschinen ausgelegt und bietet durch die reduzierte Auskraglänge erhöhte Stabilität beim Bohren. Welche Vorteile bietet die DIN 338-Ausführung? Die DIN 338-Ausführung garantiert normierte Längen und Schaftmaße, was die Austauschbarkeit und Einsatzsicherheit in Bohrfuttern erleichtert. Wie viele Bohrungen sind pro Bohrer zu erwarten? Die Standzeit hängt vom Werkstoff und der Kühlung ab; der HSS-Werkstoff des Spiralbohrers 40057-FDA bietet gegenüber geschwächten Varianten bessere Bruchfestigkeit bei kleinen Durchmessern. Wird der Bohrer als Einzelstück oder im Set geliefert? Der Spiralbohrer 40057-FDA wird in einer Verpackungseinheit von 10 Stück ausgeliefert, ideal für den Werkstattbedarf oder die Serienarbeit.
5.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill Type N — short, 5.7 mm, 135°, 5% cobalt-alloyed, HSS‑E, DIN 338, fully ground (MetavCUT Standard Line) The Twist Drill Type N short is a precision drill for metal, designed for Drilling Machine use and optimised for stable, accurate holes in hard materials. Short design for higher stability 5.7 mm diameter for standard metal holes 135° tip angle for hard materials HSS‑E with 5% cobalt alloy for toughness Fully ground shaft for precise bore quality Precision and material strength for demanding metalwork This paragraph explains why the Twist Drill Type N from MetavCUT suits hard-material applications: the combination of HSS‑E and 5% cobalt-alloyed composition increases heat resistance and Wear Resistance during high-speed drilling. Because the tool is made in a short execution, the Reduced Overhang improves rigidity and lowers the risk of bending, which yields cleaner bores and longer tool life. For users who require repeatable accuracy, these material choices translate directly into fewer rejects and less rework. Stability and cutting geometry that ease machining in steel Designed with a 135° tip angle and the classic Type N spiral geometry, this drill penetrates hard steels and alloys more effectively than steeper-point designs. The fully ground flute geometry (HSS‑G) produces sharp cutting edges and high Runout Accuracy, giving a better surface finish in the workpiece. Operators will benefit from reduced vibration and steadier feed, which is especially relevant when machining stainless steel or alloyed materials that demand longer tool life. When to choose a short twist drill and typical applications A short Twist Drill is recommended for operations where Precision and Stability matter: jig work, toolroom tasks and metal fabrication on handheld or bench Drilling Machines. Because of the reduced cantilever, the tool is particularly suited to drilling in rigid setups and hard materials; it is less appropriate where deep through-holes are required. If the task involves smaller hole diameters under high cutting speeds, the short design lowers breakage risk and supports reliable repeatability. Who benefits from this tool and what to expect in use Engineers, maintenance technicians and metalworkers who prioritise Hole Quality and tool durability will find the MetavCUT Standard Line short Twist Drill a pragmatic choice. Expect consistent centring thanks to the tip geometry, straightforward regrinding when needed, and compatibility with a range of ferrous and non‑ferrous metals. Use appropriate cooling and correct spindle speeds to exploit the HSS‑E alloy’s advantages and avoid premature wear. Strongly recommended: Choose the MetavCUT Standard Line Twist Drill for precision metalworking and consult METAV Werkzeuge for tailored advice — eMail: info@metav-werkzeuge.com / Phone: +49 2822 7131930 / WhatsApp: +49 170 2837271 Technical information Designation: Twist Drill (Short) Marke: MetavCUT SKU: 47057-FDA Diameter: 5.7 mm Tip angle: 135° Type: Type N Material: HSS‑E (High Speed Steel, cobalt alloy) Cobalt content: 5% cobalt-alloyed Execution: short Spiral length: 57 mm Overall length: 93 mm Shaft finish: fully ground Suitable for: Drilling Machine / Drills for metal Standard: DIN 338 Model series: Standard Line Application: Bohrer für Metall (Drills for metal) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N from MetavCUT used for? The Twist Drill Type N by MetavCUT is primarily applied to machining high-strength materials and larger drill diameters; its short design and robust alloy make it suitable for precise metalworking where stability is required. This form is easy to regrind and withstands higher loads. Which three drill types exist? Commonly, drill types are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for ferrous and non‑ferrous metals. Why are Twist Drills tip-ground? Tip-grinding reduces the chisel edge at the point of the Twist Drill, significantly lowering friction so less feed force is needed and the tip centres more reliably in the workpiece. Can a Metal Drill be used in wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance is poorer and hole finish may be less clean; metal drills are easier to regrind and show less self-feeding compared with dedicated wood drills.
5.7mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer (Body Drill) — 5.7 mm, 135° tip, double-sided, bright finished, HSS‑G The Karosseriebohrer (Body Drill) is a double-sided Twist Drill designed for precise drilling in metal with a 135° tip angle and a bright finished surface for reliable chip evacuation and visibility. Double-ended design for doubled tool life Fully ground HSS‑G for fast, clean metal drilling 135° tip for improved entry in hard materials Bright finished surface for corrosion resistance and visibility Suitable for Hand Drills and Drilling Machines Faster, cleaner holes in demanding metal work Engineered as a double-sided Twist Drill, this Body Drill delivers efficient performance when working with alloyed and unalloyed steels. The HSS‑G (ground High Speed Steel) geometry produces sharp cutting edges and excellent run-out accuracy, so the tool creates clean, concentric holes with reduced burr formation. For users who process tough materials, the 135° Tip reduces walking and shortens the initial penetration time, which makes setup and pilot drilling faster and more predictable. Robust design that extends usability in workshop routines The double-ended execution means the drill effectively provides two cutting ends in one compact shank, offering a practical redundancy: if one tip becomes dull, simply reverse the tool to use the second cutting end. The fully ground shank and CNC-style flute grinding result in consistent chip removal and less heat build-up during intermittent drilling. As a result, operators benefit from longer effective tooling life and fewer tool changes during production runs. Tailored for metalworking and bodyshop applications This Body Drill is intended primarily for drilling in metal—especially in thin sheet and bodywork contexts—where short, stable drills are preferred. The bright finished surface supports visibility and helps with corrosion resistance in workshop environments. When paired with appropriate cutting fluid and steady feed, the Twist Drill performs reliably in materials such as steel, cast components, non-ferrous metals and certain engineering plastics, making it a versatile choice for metal fabrication and repair tasks. Who benefits most from this tool Mechanics, metal fabricators and maintenance technicians who require precise, repeatable holes in sheet metal and structural components will appreciate the combination of double-sided functionality and the HSS‑G cutting geometry. The Body Drill is also suitable for users of portable Hand Drills as well as stationary Drilling Machines, offering flexibility across workshop setups without sacrificing hole quality. For application advice or to confirm suitability for a specific material or machine, METAV Werkzeuge provides expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 Strong recommendation:_ Choose the MetavCUT Body Drill for demanding metalwork where precision and uptime matter most — METAV Werkzeuge offers professional advice and support via email, phone and WhatsApp for fitting the right drill to your workflow Designation: Karosseriebohrer (Body Drill) Marke: MetavCUT SKU: 58057-FDA Diameter: 5.7 mm Tip Angle: 135° Spiral Length: 16 mm Overall Length: 66 mm Execution: double-sided Shaft Finish: fully ground Material: HSS-G Colour / Surface: bright finished Intended For: Drilling Machine / Hand Drill Model Series: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Karosseriebohrer from MetavCUT suitable for? The MetavCUT Karosseriebohrer (Body Drill) is optimized for metalworking; its HSS‑G ground geometry is suitable for alloyed and unalloyed steels, cast components, non-ferrous metals and certain hard plastics, delivering clean holes when used with correct speeds and cooling. How does the double-sided design affect tool life and workflow? With the MetavCUT Karosseriebohrer double‑sided Twist Drill, each end functions as an independent cutting tip, so reversing the drill provides immediate reuse of the second edge, reducing downtime for tool changes and extending overall service life under similar wear conditions. For what is a Twist Drill used? A Twist Drill is primarily used for machining high‑strength materials and large drill diameters; its form allows relatively easy sharpening and it withstands higher loads, making it well suited for tasks such as holes for rivets and thin‑sheet metal work. Which three drill types exist? The main categories are Metal drills, Wood drills, and Stone / Concrete drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross edge at the drill tip, which lowers friction and required feed forces; that sharpening also improves centring of the tip in the workpiece for more accurate starts. Can you drill wood with a Twist Drill? A Metal Twist Drill can be used in wood, but guidance and finish are inferior compared with wood‑specific bits; the metal drill is easier to resharpen and shows less aggressive self‑feeding. For which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is frequently made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are categorically superior to HSS is incorrect; selection should consider working conditions to determine whether the higher cost of HSSE is justified for the specific application.
5.7mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N, Ø 5.7 mm, 135°, HSS‑G, extra short, bright finished, DIN 1897 The Twist Drill Type N is an extra short HSS‑G metal drill for Drilling Machines, designed for stable, fast and precise holes in a wide range of ferrous and non‑ferrous materials. Extra short design for improved stability HSS‑G material for demanding metal work 135° tip angle for harder workpieces Cylindrical shank for standard chucks Conforms to DIN 1897 for consistent geometry High performance for metalworking tasks With a HSS‑G cutting body and a 135° tip angle, this extra short drill bit delivers reliable penetration into harder materials such as alloyed and unalloyed steel, cast steel and non‑ferrous metals. The ground geometry reduces required feed force by up to 50% and can enable up to 40% faster drilling compared with conventional HSS bits, which translates into measurable productivity gains in workshop and maintenance environments. This makes the bit particularly suitable where robust, reproducible results are required under manual or machine operation. Compact geometry reduces breakage and improves control Designed to the DIN 1897 extra short specification, the reduced overall length provides greater torsional stiffness and lower bending, reducing the risk of fracture during handheld or confined‑space work. The shortened flute and working length improve guidance when drilling thin sheets, profiles or close‑to‑edge holes, allowing cleaner starts and fewer chattering issues. For technicians facing limited access or when a stable, controllable cut is critical, the compact form significantly enhances handling and safety. Universal mounting and consistent centring Equipped with a cylindrical shank, the drill seats securely in standard three‑jaw chucks, offering universal compatibility with common Drilling Machines and hand drills. The Type N normal spiral ensures efficient chip evacuation and a balanced cut for metal applications, while the grind and tip geometry aid centring without aggressive self‑feeding. This combination supports consistent hole quality across repeated operations and simplifies tool selection for general metal fabrication and repair tasks. Intended users and practical advantages Metalworkers, maintenance technicians and engineering workshops will value the durability and serviceability of this extra short bit. It is engineered for frequent resharpening and lower consumable turnover, which contributes to less tool waste and longer operational life. The robust design suits both professional industrial use and demanding hobbyist projects, combining precise holemaking with the convenience of a universally fitting shank and well defined cutting angles. Strong recommendation: For demanding metal drilling, choose the MetavCUT Twist Drill Type N with extra short geometry for improved stability and controlled cutting — METAV Werkzeuge offers expert technical advice and support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical Specifications for reliable selection Designation: Twist Drill Marke: MetavCUT SKU: 56057-FDA Diameter: 5.7 mm Tip angle: 135° Type: Type N Execution: extra short Colour: bright finished Material: HSS‑G Standard: DIN 1897 Overall length: 66 mm Spiral length: 28 mm Shank: Cylindrical Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is designed primarily for metalwork and is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics; its HSS‑G composition and 135° tip assist in penetrating tougher workpieces with less feed force. How does the extra short design of the Twist Drill benefit workshop tasks? An extra short Twist Drill from MetavCUT reduces bending and torsional strain compared with standard lengths, improving stability and lowering the chance of breakage; this geometry is particularly advantageous when drilling thin materials or working in confined spaces where control and guidance are essential. For what is a Twist Drill mainly used? It is mainly applied when machining high‑strength materials and larger drill diameters; the shape is easy to regrind and withstands greater loads. Which three drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the web thickness at the tip, markedly lowering friction and thus required feed forces while improving centring of the drill in the workpiece. Can a metal drill be used for wood? A metal drill can be used in wood but typically provides poorer guidance and a less clean hole; however, it is easier to resharpen and exhibits reduced self‑feeding compared with specialised wood drills.
5.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G Twist Drill (Diameter 5.7 mm, 135° tip, Type N, Bright finished, Short, DIN 338) The Twist Drill Type N for Drilling Machine is a short, fully ground HSS-G tool designed for precise metalworking and reliable performance in hard materials. Short design for higher stability Fully ground shank for precise centring 135° tip suited to hardened and stainless steels HSS-G construction for sharp edges and clean holes Conforms to DIN 338 for short metal Twist Drills Durable HSS‑G Construction for cleaner, faster holes Built from HSS‑G, this short Twist Drill delivers sharp cutting edges and high roundness for consistently clean holes in metal. The ground geometry produces fine cutting edges that reduce burr formation and improve hole quality. As a consequence of the grinding quality, this variant drills up to 40% faster and requires about 50% less feed force compared with conventional HSS tools, which is particularly beneficial when working with alloyed or unalloyed steel, cast iron and hard plastics. Short geometry that enhances precision and reduces vibration A shorter overall length and reduced cantilever create noticeably improved stability during machining, which lowers the tendency to wander or bend. The short design makes this Twist Drill especially suitable for accurate operations on stationary or light-duty machines where rigidity matters. Manufactured to DIN 338, the tool’s dimensions and tolerances align with industry expectations for short cylindrical‑shank metal Twist Drills, ensuring predictable performance in professional environments. Optimised tip and fully ground shank for reliable centring With a 135° tip angle, this Twist Drill is prepared for harder materials and reduces initial skidding on tough surfaces. The CNC grinding of the flutes and point results in precise point geometry and excellent runout accuracy, improving hole placement. The fully ground shank supports secure clamping and accurate centring in chucks, which in turn increases tool life when appropriate coolant and speeds are applied. Designed for demanding metalworking tasks and workshops Engineered as a classic Type N metal Twist Drill, this short HSS‑G model addresses the needs of professionals who require repeatable, high‑quality bore results in metals and hard plastics. The bright finished surface aids chip evacuation and inspection, while the robust construction tolerates higher cutting pressures when used with correct feeds and lubrication. For workshops that prioritise precision, the combination of short length and ground geometry offers a reliable balance between rigidity and cutting performance. For demanding metalworking tasks choose the MetavCUT Twist Drill Type N for proven HSS‑G performance — for personalised technical advice or additional specifications contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271. Technical Information Designation: Twist Drill Marke: MetavCUT SKU: 45057-FDA Diameter: 5.7 mm Tip angle: 135° Type: Type N Execution: Short Colour: Bright finished Spiral length: 57 mm Overall length: 93 mm Shank finish: Fully ground Material: HSS-G Norm: DIN 338 Application: Drills for metal Model series: Standard Line Suitable for: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill from MetavCUT, Type N? The MetavCUT Twist Drill Type N is primarily employed for machining high‑strength materials and larger bore diameters; its design is easy to re‑grind and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? For general guidance, the main categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N falls into the Metal drills category for use on metals and related materials. Why are Twist Drills with a ground point sharpened (ausgespitzt)? The sharpening reduces the cross‑cut at the tip, which substantially lowers friction and therefore requires less feed force; the improved tip also helps the MetavCUT Twist Drill Type N to centre more reliably in the workpiece. Can the MetavCUT Twist Drill Type N be used to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; the metal drill is easier to re‑sharpen and has a lower self‑feeding tendency. For which drilling depths is the Twist Drill the most used tool? A solid bore is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill (including models like the MetavCUT Type N) is the most commonly used tool. Is HSS better than HSSE? The common belief that HSSE steels are automatically superior to HSS is inaccurate; selection between HSS and HSSE should consider specific work conditions and whether the higher purchase cost of HSSE is justified for the task at hand.
5.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
MetavCUT Twist Drill — Type N, short HSS, 5.8 mm, 118°, black, DIN 338 A MetavCUT Twist Drill Type N for precise metalworking with hand and drilling machines. Short design for enhanced stability HSS material for reliable metal drilling DIN 338 standard for short twist drills 118° point angle for easier centring Precision 5.8 mm diameter for accurate holes Stable, precise metal drilling for demanding tasks The HSS construction of this short Twist Drill ensures high hardness and good toughness for machining a wide range of metals. Thanks to the reduced free length, the short design minimises runout and bending, which improves stability during drilling and reduces the risk of breakage on small diameters. This makes the tool particularly suited to workshop use where repeatable, accurate holes are required. Engineered geometry for faster centring and cleaner holes A 118° point angle provides easier centring and controlled cutting when working on softer and medium-hard materials; the geometry reduces wandering on curved surfaces and speeds initial penetration. The 5.8 mm diameter combined with a spiral length of 57 mm and overall length 93 mm delivers a compact tool that is easy to position in a chuck or hand drill. The Type N normal spiral is optimised for metal, offering good chip evacuation and long tool life in standard drilling applications. Designed for professionals and hobbyists, with expert support This Twist Drill is aimed at machinists, maintenance technicians and hobbyists who need a robust metal-drilling solution in portable or bench drilling machines. Manufactured by MetavCUT, it follows DIN 338 for short twist drills and is ideal when rigidity and precision are priorities. If uncertain whether this drill matches a specific application, METAV Werkzeuge provides comprehensive, competent advice to help select the right tool and parameters. Strong recommendation: Choose the MetavCUT Twist Drill Type N for reliable, precise metal drilling and contact METAV Werkzeuge for personalised technical support — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 40058-FDA Type: Type N Diameter: 5.8 mm Point angle: 118° Material: HSS Execution: short Colour: black Spiral length: 57 mm Overall length: 93 mm For: Drilling Machine / Hand Drills Application: Drills for metal Standard: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is designed for machining high-strength and common engineering steels as well as non-ferrous metals. Its short HSS design offers increased stability and makes it suitable for demanding drilling tasks and larger diameters, while remaining easy to regrind when needed. Which three drill types exist? The main drill types are Metal drills, Wood drills, and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for those materials, offering geometry and material choices suited to metalworking.
5.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short HSS‑E 5.8 mm, 135°, 5% cobalt‑alloyed, fully ground, DIN 338 (MetavCUT) A Twist Drill Type N crafted for precise metal drilling with a short overall length for improved stability and performance. Short design for higher stability and precision 5% cobalt‑alloyed HSS‑E for increased heat resistance Fully ground shank for superior concentricity 135° tip angle for hard material penetration Conforms to DIN 338 for standardised quality Precision and strength for demanding metalwork The HSS‑E composition combined with a 5% cobalt‑alloyed matrix provides enhanced red hardness and wear resistance, making this short twist drill particularly suited for drilling stainless steel and other hard Alloys. The 135° tip angle reduces chipping on the cutting edge and shortens the initial entry phase, so holes are started cleaner with less walking. This design leads to consistent hole quality and fewer rejects when producing components that demand close tolerances. Stable short geometry for accurate results A reduced overhang is the main benefit of the short execution: it lowers bending moments and improves tool stability in handheld and bench drilling operations. The fully ground shaft and spiral geometry ensure excellent runout and roundness, which translates into noticeably better concentricity in the finished hole. For tasks where rigidity and repeatability matter, this configuration minimises vibration and helps maintain drill life under steady, cooled cutting conditions. Application focus and user advantages Engineered as a Type N twist drill, this tool excels in metalworking environments—from maintenance benches to production machinery. It is intended for use with a Drilling Machine or Hand Drill and performs well on alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. The short length makes it ideal where access is limited or where a stable, precise bore is required. Users gain higher process reliability and improved surface finish with fewer burrs to deburr. Operating tips to extend lifetime and maintain precision For optimal performance with the MetavCUT short twist drill, use appropriate cutting speeds and continuous coolant or cutting fluid when machining steels and tougher alloys. Feed rates should be consistent and matched to diameter and material; overfeeding can induce breakage, underfeeding can cause rubbing and work hardening. Given the ground geometry, regrinding is feasible but should be performed by experienced personnel to preserve the exact tip angle and helix form. Why standards and manufacturing details matter Compliance with DIN 338 signals standardised dimensions and tolerances for short twist drills with cylindrical shank. Ground manufacturing (HSS‑G) produces sharp cutting edges and high running accuracy, which is especially beneficial for precision metal drilling. The MetavCUT approach combines these standards with material choices to give a balance between edge sharpness and toughness suitable for frequent metalworking tasks. Strongly recommended: choose the MetavCUT Twist Drill for precision metal drilling—contact METAV Werkzeuge for expert consultation and application support via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or WhatsApp at +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47058-FDA Diameter: 5.8 mm Tip angle: 135° Type: Type N Material: HSS‑E Colour / Alloy: 5% cobalt‑alloyed Execution: short Shank execution: fully ground Spiral length: 57 mm Total length: 93 mm Application: Drills for metal For drilling machine: Drilling Machine / Hand Drill Model series: Standard Line Norm: DIN 338 Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill from MetavCUT best suited for? The MetavCUT Twist Drill with its HSS‑E composition and 5% cobalt‑alloyed content is optimised for alloyed and unalloyed steel, cast iron, non‑ferrous metals and many hard plastics; the 135° tip angle helps when penetrating harder materials such as stainless steel. How should the MetavCUT Twist Drill be used to avoid breakage? Use the MetavCUT Twist Drill with appropriate cutting speeds, steady coolant flow and correct feed rates; the short design reduces bending but correct machining parameters and cooling are essential to prevent chipping or fracture. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger drill diameters. Its design allows relatively simple regrinding and it withstands higher loads due to its geometry and material composition. Which three drill types exist? There are three primary drill types: Metal drill, Wood drill, and Stone/Concrete drill. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑edge at the drill point, lowering friction and thus required feed forces while improving centring of the Twist Drill in the workpiece. Can a metal drill be used for wood? A metal drill can be used in wood, but it offers worse guidance and a less clean result compared with dedicated wood drills; however metal drills are easier to resharpen and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through hole is typically produced with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are always superior to HSS is not universally correct; evaluate your working conditions to decide whether the additional cost of HSSE is justified.
5.8mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer — Body Drill, HSS‑G, 5.8 mm, 135° tip, double‑sided, bright finished by MetavCUT The Karosseriebohrer is a double‑sided Body Drill designed for precision metalworking with handheld Drilling Machines, ideal for thin sheet and structural metal applications. Double‑ended design for extended tool life Ground HSS‑G for fast, precise metal drilling 5.8 mm diameter with 135° tip for harder steels Fully ground shank for high concentricity Bright finished surface for smooth chip evacuation High performance through ground HSS geometry The HSS‑G construction of this Body Drill delivers a sharp, consistent cutting edge that reduces cutting forces and improves drilling speed. Because the flute geometry is produced by CNC grinding rather than rolling, the result is higher Rundlaufgenauigkeit and cleaner holes in alloyed and unalloyed steels. For users working with tougher materials, the 135° point angle shortens penetration time and improves centring on stainless steels and cast materials. This engineered geometry is particularly beneficial where reproducible hole quality is required. Practical benefits of the double‑ended design A double‑sided, or double‑ended, configuration makes the tool exceptionally economical in workshop routines. When one tip becomes blunt, the drill can be reversed to use the other cutting end, effectively providing two usable tips in one compact Twist Drill. This format is especially useful for operations on sheet metal and bodywork where short, stable drill bits reduce vibration and improve control with a Drilling Machine. Precision shaft and reliable handling The fully ground shank ensures secure clamping and improved concentricity in hand drills, translating to straighter holes and reduced wobble. The bright finished surface supports smoother chip flow and reduces the risk of material build‑up on the flutes. For craftsmen and technicians who expect repeatable results when machining Nichteisenmetalle or engineering plastics, this characteristic increases process reliability and reduces rework. Application focus and user groups Engineered as a Body Drill for metalworking, this tool is aimed at professional metalworkers, sheet metal fabricators and maintenance technicians who require robust, short‑length bits for rivet and thin‑sheet holes. The combination of HSS‑G and a 135° tip makes it suitable for a range of materials including cast iron, sintered iron and hard plastics. For workshop environments that demand predictable tool behaviour and easy re‑use, the double‑ended format and ground finish provide a pragmatic advantage. Safety and usage notes for best results To maximise life and performance, use the Karosseriebohrer with adequate cooling when machining harder alloys; the ground HSS form can be more brittle than rolled variants and benefits from moderated speeds and lubrication. Secure clamping, reduced feed force and intermittent peck drilling help avoid overload. For handheld Drilling Machine operations, ensure the chuck grips the fully ground shank firmly to maintain accuracy and reduce chatter. Choose MetavCUT precision — favour the Karosseriebohrer Body Drill with HSS‑G ground cutting for demanding metalwork and contact METAV Werkzeuge for expert advice or ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Information Designation: Karosseriebohrer Brand: MetavCUT SKU: 58058‑FDA Product type: Body Drill Material: HSS‑G Execution: double sided Colour: bright finished Diameter: 5.8 mm Point angle: 135° Spiral length: 16 mm Overall length: 66 mm Shank finish: fully ground For Drilling Machine: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Karosseriebohrer Body Drill by MetavCUT suitable for? The Karosseriebohrer Body Drill from MetavCUT is optimized for metalworking and performs well in alloyed and unalloyed steels, Cast Iron, Sintered Iron and hard plastics; its HSS‑G grind provides clean hole quality under appropriate speeds and cooling. Can the Karosseriebohrer be used in a handheld drilling machine? Yes, the Karosseriebohrer by MetavCUT is intended for use with a Drilling Machine; the fully ground shank ensures secure clamping and high concentricity in handheld setups when the chuck is tightened correctly. For what is a Twist Drill used? A Twist Drill is primarily applied to machining high‑strength materials and larger drill diameters; its form is easy to grind and withstands greater loads, which makes it suitable for demanding metalworking tasks. Which three drill types are there? The main categories are metal drills, wood drills and stone/concrete drills. Each is optimised in geometry and material for its specific application.
5.8mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Der extra kurze HSS-G Spiralbohrer kombiniert hohe Stabilität mit geringer Bruchneigung und ermöglicht dank geschliffener Fertigung bis zu 40 % schnellere Bohrungen bei 50 % geringerer Anpresskraft. Nutzen Sie diese Kombination aus Robustheit und Effizienz für präzise Metallarbeiten und bestellen Sie das Werkzeug direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer — HSS-G extra kurz von MetavCUT Der Spiralbohrer in extra kurzer Ausführung ist für präzise Metallbohrungen mit Handbohrmaschine konzipiert und eignet sich besonders für dünne Bleche und profile. Extra kurze Ausführung für mehr Stabilität HSS-G: hohe Zähigkeit und Wärmebeständigkeit 135° Spitzenwinkel für härtere Werkstoffe Zylinderschaft: kompatibel mit Dreibackenfutter Typ N Normalspirale, geeignet für Stahl und Guss Hohe Leistung durch Material und Geometrie Dank des Werkstoffs HSS-G und der geschliffenen Oberfläche bietet dieser Spiralbohrer eine Kombination aus Zähigkeit und scharfer Schneide, die das Eindringen in legierte und unlegierte Stahlarten erleichtert. Die extra kurze Bauform reduziert Hebelwirkung und erhöht die Rundlaufstabilität, wodurch die Bruchneigung bei Handbohrmaschinen deutlich sinkt. Durch den größeren 135° Spitzenwinkel wird die Anbohrzeit bei härteren Werkstoffen verkürzt, was zu einem spürbaren Zeitgewinn führt. Praktische Anwendung und Zielgruppe Für Werkstätten, Montagebetriebe und ambitionierte Heimwerker ist dieser Bohrer ein verlässliches Werkzeug bei Metallbearbeitung und Instandsetzung. Die Konstruktion macht das Werkzeug besonders geeignet für Bohrungen in dünnwandige Bleche und Profile, sowie für beengte Arbeitsverhältnisse, in denen lange Werkzeuge an ihre Grenzen stoßen. Anwender profitieren von der universellen Einsetzbarkeit in Handbohrmaschinen und von der einfachen Handhabung mit herkömmlichen Bohrfuttern. Handhabung, Schaft und Kompatibilität Der Zylinderschaft ermöglicht das Einspannen in gängige Dreibackenfutter und sorgt für eine schnelle Austauschbarkeit im Alltag. Bei hohen Drehmomentanforderungen ist der Zylinderschaft weniger gegen Durchrutschen geschützt als Sechskantformen; deshalb empfiehlt sich kontrolliertes Einspannen und gegebenenfalls Verwendung einer kraftschlüssigen Spannlösung. Die kurze Spiralzone sorgt für bessere Spanabfuhr bei flachen Materialien und reduziert das Risiko von Verstopfungen. Warum diese Ausführung wählen Die Kombination aus DIN 1897-Konformität, geschliffener Schneide und Typ N Normalspirale macht dieses Werkzeug zu einer wirtschaftlichen Wahl für vielfältige Metallaufgaben. Die robuste Ausführung ist auf Langlebigkeit ausgelegt und bietet durch die reduzierte Anpresskraft eine ergonomische Arbeitserfahrung. Bei Fragen zur optimalen Anwendung oder zur Wahl des richtigen Drehzahlbereichs begleitet Metav mit technischer Beratung. MetavCUT empfiehlt den HSS-G Spiralbohrer als präzise Lösung für Metallarbeiten — für bestmögliche Ergebnisse direkt bei Metav anfragen per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 56058-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 1897 Daten Durchmesser: 5,8 mm Gesamtlänge: 66 mm Spirallänge: 28 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Stück Besonderheiten Material: HSS-G Ausführung: extra kurz Typ: Typ N (Normalspirale) Schaftausführung: Zylinder Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer aus HSS-G mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe wie Edelstahl, wobei eine passende Kühlschmierstoffzufuhr und angepasste Schnittgeschwindigkeit empfohlen werden. Welche Maschinen sind mit diesem Bohrer kompatibel? Der Spiralbohrer mit Zylinderschaft ist für Handbohrmaschine und Winkelbohrmaschine ausgelegt und lässt sich problemlos in ein Dreibackenfutter spannen. Warum ist die Ausführung extra kurz vorteilhaft? Die extra kurze Bauform des MetavCUT HSS-G Spiralbohrers erhöht die Stabilität, reduziert die Bruchgefahr und ist ideal für Bohrungen in dünnwandigen Blechen und beengten Einsatzbereichen. Wie verhält sich die Standzeit im Vergleich zu herkömmlichen HSS-Bohrern? Durch die geschliffene Fertigung ermöglicht der Spiralbohrer aus HSS-G deutlich schnellere Bohrungen und erfordert weniger Anpresskraft, was sich positiv auf die Standzeit und Produktivität auswirkt. Für welche Materialien ist der Bohrer ausgelegt? Der MetavCUT Spiralbohrer ist besonders geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und harte Kunststoffe.
5.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze HSS‑G Spiralbohrer überzeugt durch Stabilität, hohe Schnittgeschwindigkeit und einen 135° Spitzenwinkel für harte Werkstoffe; ideal für präzise Metallbohrungen in Werkstatt und Industrie. Nutzen Sie die Kombination aus schneller Bohrleistung und robuster Ausführung für zuverlässige Ergebnisse und bestellen Sie direkt über Metav oder fragen Sie unsere technische Beratung an. Spiralbohrer 5,8 mm — kurzer HSS‑G Metallbohrer Der Spiralbohrer in kurzer Ausführung für präzise Metallbohrungen mit 135° Spitzenwinkel und geschliffenem Zylinderschaft. Spiralbohrer von MetavCUT geschliffen Kurze Ausführung für höhere Stabilität HSS‑G für schnelle und saubere Bohrung 135° Spitzenwinkel für harte Werkstoffe Zylinderschaft nach DIN 338 Mehr Stabilität, höhere Vorschubkraft und schnelleres Bohren Die kurze Bauform reduziert die Auskraglänge und erhöht so die Steifigkeit des Werkzeugs. Dadurch entsteht weniger Verbiegen bei der Bohrung und die Kraftübertragung bleibt konstant, was besonders bei legierten Stählen und Temperguss von Vorteil ist. Der geschliffene HSS‑G Werkstoff sorgt für sehr scharfe Schneiden und ermöglicht laut Hersteller bis zu 40 % schnellere Bohrfortschritte bei gleichzeitig bis zu 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS‑Bohrern. Für Anwender bedeutet das weniger Nacharbeit und eine effizientere Fertigung. Geeignet für Handwerk, Werkstatt und Maschinenbetrieb Dank des Durchmessers von 5,8 mm und der Klassifikation im Standard‑Bereich eignet sich dieses Werkzeug für den typischen Werkstattalltag: Montage, Reparatur und präzise Metallbearbeitung. Die kurze Ausführung passt gut in handgeführte Bohrmaschinen, bringt aber ihre Stärken auf stationären Säulenbohrmaschinen voll zur Geltung. Zur Vermeidung von „Wandern“ bei der Anbohrung empfiehlt sich ein Anreißstift oder ein Vorstechen mit einem Zentrierbohrer; für gehärtete Werkstoffe wird außerdem Kühlschmierstoff empfohlen. Fertigungsqualität, Norm und Einsatztipps Der Spiralbohrer entspricht DIN 338 und ist als geschliffener Typ ausgeführt, wodurch die Spannuten per CNC‑Schliff ausgearbeitet sind. Diese Fertigungsart liefert hohe Rundlaufgenauigkeit und saubere Bohrbilder, kann aber spröder sein als rollgewalzte Ausführungen; daher ist der Einsatz mit Kühlung und kontrollierter Schnittgeschwindigkeit sinnvoll. Der 135° Spitzenwinkel reduziert das Anbohrverhalten in harten Metallen und verlängert die Standzeit bei korrekter Handhabung. Der Zylinderschaft ist für einfache Spannsysteme ausgelegt und erlaubt schnellen Werkzeugwechsel. Für präzise Metallbohrungen empfiehlt MetavCUT den kurzen HSS‑G Spiralbohrer in der Ausführung Standard Line; Bestellung und technische Beratung erhalten Sie direkt bei Metav per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 45058-FDA Marke: MetavCUT Modellserie: Standard Line Ausführung: kurz Fakten Durchmesser: 5,8 mm Gesamtlänge: 93 mm Spirallänge: 57 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen Norm: DIN 338 (Kurzspiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale für Metall) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine FAQ Eignet sich dieser Bohrer für Edelstahl? Der kurze HSS‑G Spiralbohrer von MetavCUT ist für harte Werkstoffe ausgelegt; der 135° Spitzenwinkel reduziert das Anlaufen und macht den Bohrer für viele Edelstähle geeignet, sofern mit geeigneter Schnittgeschwindigkeit und Kühlschmierstoff gearbeitet wird. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Durchmesser von 5,8 mm fällt in den Standard‑Bereich und ist für Handbohrmaschinen geeignet; die kurze Ausführung verbessert die Stabilität, dennoch empfiehlt sich beim Bohren von harten Materialien eine stationäre Maschine oder ruhige Handführung. Was bedeutet HSS‑G und geschliffen? HSS‑G steht für Geschliffenen Schnellarbeitsstahl; geschliffene Bohrer bieten scharfe Kanten und hohe Rundlaufgenauigkeit, sind aber tendenziell spröder als rollgewalzte Werkzeuge und profitieren von Kühlung bei hohen Belastungen. Wie verhindert man das Wandern beim Anbohren? Vorstechen mit einem Zentrierbohrer oder Anreißen an der Bohrstelle reduziert das Wandern. Für den MetavCUT Spiralbohrer empfiehlt sich zudem eine geringe Vorschubkraft beim Ansetzen und gegebenenfalls ein Zentrierstift. Welche Vorteile bringt die DIN 338 Klassifizierung? Die DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft aus HSS; die Einhaltung dieser Norm garantiert standardisierte Maße, Austauschbarkeit im Spannfutter und Fertigungsqualitäten, wie sie beim Spiralbohrer MetavCUT mit der Artikelnummer 45058-FDA vorliegen.
5.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 5.9 mm, HSS, Short, Black, 118° (DIN 338) by MetavCUT The Twist Drill is a short HSS Type N metalworking drill designed for precise drilling in Drilling Machines and Hand Drills across workshop and maintenance applications. Short HSS design for increased stability DIN 338 compliant for consistent quality 118° Tip for reliable centring Suited for Drilling Machine and Hand Drill Black finish for improved corrosion resistance Precision and Stability for Metalworking Manufactured as a short variant according to DIN 338, this Twist Drill offers enhanced stability and minimal deflection during machining. Because the protruding length is reduced, the tool runs truer in the chuck and transfers cutting forces more directly, resulting in straighter holes and longer tool life. This design is particularly beneficial when working with tougher materials where chatter and bending would normally compromise accuracy. Tip Geometry Optimised for Reliable Centring The 118° Tip provides a balanced compromise between fast penetration and good centring, making it well suited for softer steels, non-ferrous metals and general metalworking tasks. A narrower tip angle reduces the tendency to wander on curved or uneven surfaces, while the point geometry also lowers the initial radial forces so that drilling starts cleanly and precisely. This results in more accurate hole positioning and less rework. High Speed Steel Construction for Durable Performance Made from HSS (High Speed Steel), the drill combines toughness with wear resistance for typical metal drilling tasks. The roll-formed production method increases elasticity and reduces breakage risk in smaller diameters, while still allowing reliable performance in alloyed and unalloyed steels, cast iron, non-ferrous metals and selected plastics. Users benefit from a tool that tolerates machining stresses and can be resharpened when necessary, prolonging service life. Designed for Professional and Workshop Use This Twist Drill supports both stationary Drilling Machines and portable Hand Drills, providing versatility for tradespeople and maintenance technicians. The black surface finish helps to delay corrosion and eases chip evacuation, while the Type N normal spiral geometry focuses on efficient metal cutting. For demanding tasks where stability and repeatable results matter, this tool delivers consistent performance. Choose MetavCUT quality for confident metalworking — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or reach out via WhatsApp +49 170 2837271 Technical Details Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 40059-FDA Typ: Type N Durchmesser: 5.9 mm Spitzenwinkel: 118° Material: HSS Norm: DIN 338 Ausführung: Short Spiral Length: 57 mm Overall Length: 93 mm Colour: Black Application: Drills for metal Recommended For: Drilling Machine / Hand Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suited to? The MetavCUT Twist Drill (Type N) is primarily applied to metalworking; it is used especially for machining tougher materials and larger drill diameters where tool stability is essential. Its HSS construction allows effective drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and some plastics. Which three drill types are commonly available? The three main drill categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Twist Drill is classified as a Metal Drill suited to machining metals. Why are Twist Drills pointed? The point reduces the size of the cross-cutting edge at the tip. Pointing the Twist Drill significantly lowers friction and therefore the required feed force, while improving the drill tip’s ability to self-centre in the workpiece for cleaner starts. Can the Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but it will typically have less guidance and produce a rougher finish than a dedicated Wood Drill. Metal drills are easier to resharpen and show less self-feeding, which can be an advantage or disadvantage depending on the task. At which drilling depths is the Twist Drill most commonly used? A through-hole in solid material is often executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool.
5.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, 5.9 mm, 135°, 5% cobalt-alloyed, HSS‑E, fully ground shank, DIN 338 The Twist Drill Type N short is a precision metal‑drilling tool designed for Drilling Machines and demanding work on hard materials. Short design for improved stability 5% cobalt‑alloyed HSS‑E for higher heat resistance 135° point angle for hard materials Fully ground shank for precise runout DIN 338 compliant Standard Line Higher performance through material and geometry The combination of HSS‑E and 5% cobalt provides noticeably improved red‑hardness and wear resistance, which means longer tool life when machining tough alloys. The short design reduces cantilever and vibration, resulting in more consistent hole quality and less risk of runout. This configuration is especially sensible where repeatable, clean holes are required and small deviations cannot be tolerated. Optimised for hard materials and precise entry A 135° point angle reduces the tendency to wander and shortens the initial bite when working Stainless Steel or other hard metals, so drilling starts more reliably. The designation Type N denotes the classic spiral geometry for metalwork; it balances chip evacuation and wall finish. For users unfamiliar with point angles: a larger angle produces a flatter tip that spreads cutting forces and reduces chatter on hard materials. Manufacturing method and practical advantages The fully ground flute geometry (HSS‑G style) gives very sharp cutting edges and excellent concentricity, producing clean bores with minimal burr. Ground drills are easier to re‑sharpen and deliver superior roundness compared with roll‑formed equivalents, though they require appropriate coolant and steady feeds to minimise fracture risk. The DIN 338 classification confirms that this short Twist Drill meets standard dimensions and tolerances for professional Metalworking. Suitable applications and handling recommendations Designed for use in Drilling Machines, the short Twist Drill is ideal for precise machining of alloyed and unalloyed steel, cast iron, non‑ferrous metals and engineering plastics. Use moderate cutting speeds and steady feed; apply coolant for stainless and other high‑temperature materials to extend life. If uncertain about speeds or regrinding, METAV Werkzeuge offers expert advice and technical support to match the tool to the application. Strong recommendation for precision metalworking: choose the MetavCUT Twist Drill Type N short for stable, reliable holes — for personalised technical guidance contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47059-FDA Diameter: 5.9 mm Point angle: 135° Type: Type N Material: HSS‑E Execution: short Spiral length: 57 mm Overall length: 93 mm Shank execution: fully ground Model series: Standard Line Norm: DIN 338 Colour: 5% cobalt‑alloyed For: Drilling Machine Application: Drills for metal Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N short used for? The MetavCUT Twist Drill Type N short is primarily applied when machining high‑strength materials and for larger bore diameters; its short geometry increases stability, the shape allows straightforward resharpening and the tool endures higher loads in professional Metalworking. Which three drill types exist? There are three principal drill categories: Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N short belongs to the Metal drills group and is optimised for metal applications.
5.9mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Die Kombination aus HSS‑G‑Schliff, Doppelendbohrer‑Ausführung und dem 135° Spitzenwinkel bietet langlebige Präzision und schnelle Bohrfortschritte in Metall. Bestellen Sie den Karosseriebohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Karosseriebohrer von MetavCUT (Doppelendbohrer) Karosseriebohrer aus geschliffenem HSS‑G für präzise Metallbohrungen mit kurzer Bauform und hoher Rundlaufgenauigkeit Doppelendbohrer: beidseitig einsetzbar Geschliffene HSS‑G‑Geometrie für Metall 135° Spitzenwinkel für harte Werkstoffe Für Handbohrmaschine geeignet, kurze Bauform 5,9 mm Durchmesser, präziser Rundlauf Höhere Effizienz durch geschliffene HSS‑G‑Geometrie Geschliffene HSS‑G‑Bohrer bieten im Vergleich zu gewalzten Ausführungen eine deutlich schärfere Schneide und eine bessere Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stählen ermöglicht. Das Ergebnis ist eine Reduktion der Anpresskraft und ein schnellerer Vorschub, was besonders bei wiederkehrenden Arbeiten Zeit spart. Für Anwender bedeutet das einen messbaren Produktivitätsgewinn und weniger Gratbildung an den Bohröffnungen. Kurzbauweise und doppelseitige Funktion für die Werkstattpraxis Die kurze Bauform und die Doppelendbohrer‑Ausführung machen das Werkzeug flexibel einsetzbar, besonders in der Karosserie‑ und Blechbearbeitung. Ist eine Spitze stumpf, kann die andere Seite sofort genutzt werden, was Ausfallzeiten reduziert. In Kombination mit einer Handbohrmaschine bleibt die Führung stabil, sofern die Drehzahl und der Vorschub an das Material angepasst werden. Technische Anpassung an härtere Werkstoffe dank 135° Spitzenwinkel Ein Spitzenwinkel von 135° verringert das Anlaufverhalten bei härteren Werkstoffen und erhöht die Zentrierstabilität beim Anbohren. Das ist vorteilhaft beim Bohren in Gussstahl, Sintereisen und teilweise gehärteten Bauteilen. Der größere Winkel reduziert das Risiko des „Wanderns“ beim Anbohren und erleichtert die Verarbeitung anspruchsvollerer Materialien ohne aufwändige Vorarbeit. Einsatzbereich, Zielgruppe und Handhabungsempfehlung Dieser Bohrertyp richtet sich an Fachbetriebe und versierte Heimwerker, die regelmäßig Metall bearbeiten und Wert auf schnelle Wechselbarkeit legen. Für den besten Verschleißschutz empfiehlt sich stationäre Kühlung oder zyklisches Schmiermittel bei längerer Dauerbeanspruchung. Bei präzisen Passungen ist ein Zentrierbohrer vorzuarbeiten, um die beste Genauigkeit zu erzielen. Vorteil für die Beschaffung und Qualitätskontrolle MetavCUT‑Ausführungen in der Standard Line bieten eine Kombination aus gebrauchsfertiger Präzision und wirtschaftlicher Handhabung. Durch die geschliffene Schaftausführung bleibt der Rundlauf auch unter Belastung stabil, was die Ausschussrate reduziert und Nacharbeit minimiert. So lässt sich die Werkstattorganisation straffen und die Ersatzteilbevorratung effizient planen. Empfehlung: Den geschliffenen HSS‑G Doppelendbohrer von MetavCUT über Metav Werkzeuge beziehen; bei technischen Fragen kontaktieren Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930, alternativ WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 58059-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Karosseriebohrer Fakten Durchmesser: 5,9 mm Gesamtlänge: 66 mm Spirallänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Ausführung: doppelseitig Schaftausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Farbe: blank SKU: 58059-FDA FAQ Für welche Materialien eignet sich dieser Bohrer am besten? Der geschliffene HSS‑G Bohrer von MetavCUT eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie für Nichteisenmetalle und Hartkunststoffe; bei sehr zähen Werkstoffen ist auf Kühlung zu achten. Kann der Bohrer in einer handelsüblichen Handbohrmaschine verwendet werden? Ja, die Konstruktion ist für die Nutzung mit einer Handbohrmaschine ausgelegt, solange die Maschine ausreichend Drehzahl und eine stabile Führung bietet. Was bedeutet die Angabe 135° beim Spitzenwinkel? Ein Spitzenwinkel von 135° reduziert das Anlaufverhalten und verbessert die Zentrierung beim Bohren in härtere Werkstoffe; das führt zu saubereren Bohrlöchern und weniger Ausrissen. Wie wirkt sich die geschliffene Ausführung auf die Leistung aus? Die geschliffene Geometrie (HSS‑G) sorgt für schärfere Schneiden und höhere Rundlaufgenauigkeit, was schnellere Vorschübe und geringeren Kraftaufwand ermöglicht.
5.9mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — MetavCUT Type N, 5.9 mm, 135° Point, HSS‑G, Extra Short, Bright Finish, DIN 1897 An Twist Drill (Type N) for Drilling Machines providing extra‑short stability and precise metal drilling in confined spaces. MetavCUT Type N for metal drilling Extra Short design for greater stability 135° point angle for harder materials Cylindrical shank fits standard three‑jaw chucks HSS‑G ground for faster, lower‑force drilling High-performance drilling for hardened and alloyed metals The extra‑short HSS‑G Twist Drill delivers improved stability and reduced breakage risk when working with steels and other hard materials. The 135° point angle optimises penetration in tougher alloys and shortens the pilot phase, resulting in more efficient cutting when compared with standard‑length drills. Thanks to the ground geometry, the Tool requires less axial force and allows for controlled cutting even under demanding conditions. Reliable results in tight or thin‑walled assemblies Short overall length and reduced flute length make this Twist Drill especially suitable for work in confined spaces or thin materials such as sheet metal and profiles. The Extra Short format increases torsional stiffness and reduces chatter, which improves hole quality and concentricity. This construction is a practical choice for Hand Drilling Machines and situations where workspace is limited. Simple mounting and universal compatibility Equipped with a Cylindrical shank, this Twist Drill is compatible with standard three‑jaw chucks and thus integrates easily into existing workshop setups. The classic Type N spiral geometry is optimised for metalworking and offers straightforward re‑sharpening when required. For operations demanding high repeatability, the combination of HSS‑G material and precise grinding ensures consistent performance across batches. Target users and recommended applications Designed for machinists, maintenance technicians and industrial workshops, the MetavCUT Twist Drill is targeted at drilling tasks in legated and unlegated steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The tool is particularly advantageous where quick, accurate holes are needed in challenging materials or restricted environments, providing a balance of durability and ease of use. Strong recommendation: Choose the MetavCUT Twist Drill (Type N) with Extra Short HSS‑G geometry for precision metalworking in confined spaces — METAV Werkzeuge offers expert technical advice and selection support at info@metav-werkzeuge.com or by phone +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 56059-FDA Diameter: 5.9 mm Total Length: 66 mm Spiral Length: 28 mm Point Angle: 135° Type: Type N Execution: Extra Short Colour/Finish: Bright Finished Shank Execution: Cylindrical (Round Shank) Material: HSS‑G Standard: DIN 1897 For Machine: Drilling Machine (Handbohrmaschine) Model Series: Standard Line Application: Drills for Metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of a Twist Drill? A MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its form is easy to re‑grind and resists higher loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? Common categories are Metal Drills (such as the MetavCUT Twist Drill Type N), Wood Drills, and Stone/Concrete Drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑cut at the tip of a Twist Drill, significantly lowering friction and required feed forces while improving centring and hole start accuracy for MetavCUT drills. Can a metal Twist Drill be used in wood? A metal drill like the MetavCUT Twist Drill can be used in wood but will guide less well and produce a less clean finish; however, it is easier to re‑grind and exhibits lower self‑feeding tendencies. For which drilling depths is the Twist Drill most commonly used? A through hole in solid material is typically executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill remains the most frequently used tool.
Reliable performance for daily drilling
The Standard line is a versatile series of HSS (high-speed steel) twist drills, also described as standard twist drills or precision HSS twist drills, engineered for everyday industrial and workshop use. Positioned between economy options and specialist pro-grade tools, the standard line delivers consistent, repeatable results for regular drilling tasks without the need for high-cost alloys.
How the standard line performs in practice
Designed as precision ground (HSS‑G) twist drills, the standard line combines a refined manufacture process with a classic geometry. A typical 118° tip and a cleanly formed point give good penetration and reliable centring, while extremely smooth flute surfaces support efficient chip evacuation. The result is stable running, improved hole quality and extended tool life under normal production and maintenance conditions.
Key advantages that matter on the shop floor
- Reduced rework thanks to high concentricity and precise hole quality
- Lower tool consumption through enhanced wear resistance from precision grinding
- Faster cycle times via efficient chip removal from smooth flutes
- Broad applicability across common materials: steel, cast iron, sintered metal, plastics and non‑ferrous metals
- Ideal balance of performance and cost for workshops, maintenance teams and assembly lines
Technical data
- Material: HSS (high-speed steel)
- Manufacture: precision ground (HSS-G)
- Tip angle: 118° (typical)
- Features: smooth flutes, optimised point geometry, excellent concentricity
- Applications: unalloyed steel, low-alloy steel, cast iron, sintered metal, plastics, non‑ferrous metals
Why Metav is the smart sourcing choice
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of technical know-how with a broad assortment, making high-quality measuring and workshop tools accessible to small and large operations alike. With over 48,000 customers, more than 250,000 products and a logistics hub in Emmerich, Metav offers dependable supply and a curated quality filter for the european market — the sensible route to equip your shop with standard line twist drills and complementary tooling.
FAQ
What materials are standard line twist drills suitable for?
The standard line twist drills are suitable for unalloyed and low‑alloy steel, cast iron, sintered metal, plastics and non‑ferrous metals, matching typical workshop and light industrial requirements.
How does the precision ground (HSS‑G) design benefit drilling results?
Precision ground manufacture increases concentricity and improves cutting edge finish, which leads to better hole quality, reduced vibration and longer tool life compared with roll‑formed entry‑level drills.
Are standard line drills a substitute for pro‑grade specialist drills?
Standard line drills are intended as the reliable everyday option; they deliver consistent performance for regular production and maintenance but are not a replacement when extreme loads or specialised alloys demand pro‑grade materials.
Which synonyms should procurement teams use when searching for these tools?
Search terms such as “standard twist drills”, “HSS standard drills” or “precision HSS twist drills” will reliably lead to the standard line and comparable products.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com