Reliable drilling performance with Standard Line twist drill
Standard Line twist drill and standard drills deliver consistent, precision holemaking for daily industrial and workshop use, combining durable high-speed steel construction with precision-ground flutes to ensure excellent runout and chip evacuation. Designed for machining unalloyed and low-alloy steel, cast iron, sintered metal, plastics and non-ferrous metals, these drills provide a balanced mix of wear resistance and hole quality for routine production and maintenance tasks. Ideal for workshops, maintenance departments and assembly plants, the system offers a dependable, cost-effective solution between entry-level and heavy-duty ranges, featuring an optimised 118° point for good penetration and centring. Key advantages include precision-ground construction, excellent chip evacuation and consistent hole quality.
5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der extra lange Spiralbohrer von MetavCUT kombiniert HSS-G-Material, geschliffene Schaftgeometrie und eine Tieflochspirale zu einer Lösung für tiefe Metallbohrungen. Die Konstruktion ermöglicht schnelleres Bohren bei geringerem Anpressdruck und sorgt für präzise, saubere Bohrlöcher. Bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere technische Beratung bei offenen Anwendungsfragen an. Spiralbohrer 5 mm – MetavCUT Standard Line, HSS-G extra lang Der Spiralbohrer von MetavCUT ist ein extra langer, geschliffener HSS‑G Bohrer für tiefe Metallbohrungen in Werkstatt und Industrie. MetavCUT Spiralbohrer 5 mm HSS-G extra lang Geschliffen nach DIN 1869 für hohe Präzision Spitzenwinkel 135° für härtere Werkstoffe Gesamtlänge 195 mm, Spirallänge 135 mm Geeignet für Handbohrmaschine und stationäre Maschine Belastbare Leistung durch geschliffenes HSS‑G für Metallbearbeitung Der HSS-G-Werkstoff in Kombination mit CNC‑geschliffener Geometrie macht diesen Bohrer besonders effizient beim Bohren in Stahl und Guss. Durch den geschliffenen Schliff sind die Schneiden sehr scharf, was ein bis zu 40 % schnelleres Bohren und etwa 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS‑Bohrern ermöglicht. Für Anwender bedeutet das kürzere Bearbeitungszeiten und geringere Belastung von Maschine und Werkstück. Extra lange Bauform für tiefe und schwer zugängliche Bohrungen Die extra lange Gesamtlänge erlaubt das Bohren tiefer Löcher oder das Erreichen von Bereichen hinter Befestigungen, ohne die Spannmittel neu ausrichten zu müssen. Die Tieflochspirale unterstützt den Spantransport bei längeren Bohrungen, reduziert das Verklemmen und trägt zu gleichmäßigen, sauberen Bohroberflächen bei. Bei tiefen Bohrungen empfiehlt sich ein Kühlschmierstoff, um thermische Belastung und Verschleiß zu minimieren. Praxisnahe Tipps für sichere und präzise Anwendung Mit einem Spitzenwinkel von 135° dringt der Bohrer leichter in härtere Werkstoffe ein und reduziert das Auswandern beim Anbohren. Für höchste Passungsgenauigkeit vor dem Bohren punktuell anreißen oder mit einem Zentrierbohrer anpunkten. Bei Verwendung in Handmaschinen auf stabile Auflage und gleichmäßigen Vorschub achten; bei Bedarf stationär spannen, um Bruchrisiken durch Biegebeanspruchung zu vermeiden. Für wen sich dieser Bohrer eignet und was ihn auszeichnet Der Bohrer richtet sich an Handwerk, Werkstatt und industrielle Anwender, die tiefe Metallbohrungen in Materialien wie legiertem und unlegiertem Stahl, Gussstahl und Nichteisenmetallen durchführen. Die Kombination aus DIN 1869‑konformer Tieflochspirale, voll geschliffenem Schaft und der extra langen Ausführung macht ihn zur Wahl, wenn Stabilität, Präzision und Spanabfuhr im Vordergrund stehen. Empfehlung: MetavCUT Standard Line HSS‑G Spiralbohrer wegen extra langer Ausführung für tiefe Metallbohrungen direkt bei Metav beziehen oder technische Details per E‑Mail an info@metav-werkzeuge.com anfragen Produktmerkmale Artikelnummer: 32050-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Ausführung: extra lang Material: HSS-G Norm: DIN 1869 Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Werte Durchmesser: 5 mm Gesamtlänge: 195 mm Spirallänge: 135 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Stück Besonderheiten Tieflochspirale zur verbesserten Spanabfuhr HSS-G (geschliffen) für hohe Schneidenschärfe und Rundlaufgenauigkeit Geeignet für legierten und unlegierten Stahl bis 1000 N/mm² Einsatz in Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle, Hartkunststoff FAQ Welche Materialien kann ich mit dem Spiralbohrer bearbeiten? Der MetavCUT Spiralbohrer (Standard Line, SKU 32050-FDA) eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff; bei sehr harten oder zähen Werkstoffen sind passende Kühlung und angepasste Schnittparameter nötig. Ist der Bohrer für handgeführte Maschinen geeignet? Ja, der Bohrer wurde für den Einsatz in Handbohrmaschinen und stationären Maschinen ausgelegt; bei handgeführtem Einsatz auf stabile Führung und moderaten Vorschub achten, um Bruchgefahr zu minimieren. Warum ist der Bohrer geschliffen und welche Vorteile bringt das? Die geschliffene Schaft- und Schneidengeometrie sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher und bessere Bohrgeschwindigkeit ermöglicht; Nachteil ist eine erhöhte Sprödigkeit, daher stationäre Nutzung und Kühlung empfohlen. Wie tief kann ich mit der extra langen Ausführung bohren? Die extra lange Gesamtlänge und die Tieflochspirale erlauben deutlich tiefere Bohrungen als Standardvarianten; für sehr tiefe Löcher empfiehlt sich schrittweises Bohren und aktive Spanabfuhr sowie Kühlung zur Prozessstabilität. Welcher Spitzenwinkel ist optimal und warum? Der Spitzenwinkel 135° dieses Bohrers ist speziell für härtere Werkstoffe ausgelegt, weil er das Eindringen reduzierten Anstellwinkel verbessert und das Wandern beim Anbohren verringert, was zu präziseren Bohrungen führt.
5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G, 5 mm, 135°, Bright Finished, Fully Ground Shank (DIN 1869) The Twist Drill is an extra long, bright finished metalworking drill designed for Drilling Machine use, offering a 5 mm diameter, 245 mm overall length and a 135° point angle for precise deep-hole metal drilling. Extra long design for deep holes Fully ground shank for high runout accuracy HSS‑G material for hard metals and plastics DIN 1869 standard for deep‑hole performance 170 mm spiral length for extended cutting reach High performance drilling power for demanding metalwork The HSS‑G Extra Long Twist Drill delivers reliable metal removal with optimized cutting geometry. With a 5 mm diameter and 170 mm spiral length within a 245 mm overall length, this drill is built for deep and hard‑to‑reach applications. The 135° point angle reduces initial cutting forces on tougher materials and improves centring, while the bright finish minimises adhesion. The product is particularly suited for drilling alloyed and unalloyed steels, cast irons, sintered materials, non‑ferrous metals and hard plastics, offering measurable efficiency gains compared with standard drills. Precise, ground geometry for clean holes and reduced effort CNC grinding of the flute geometry (designation HSS‑G) produces very sharp cutting edges and excellent concentricity, which yields clean, accurate holes and improves tool life under correct conditions. Due to the grinding process, the Twist Drill shows superior runout behaviour and cutting precision compared with rolled equivalents. The trade‑off is higher brittleness; therefore the tool performs best in well‑clamped setups with appropriate cooling. The ground design also supports up to 40% faster drilling and requires up to 50% less thrust under suitable conditions, reducing operator effort on demanding materials. Designed for professionals who need reach and reliability This Extra Long Twist Drill targets workshop professionals, maintenance technicians and metal fabricators who require extended reach without sacrificing accuracy. The fully ground shank ensures secure clamping and repeatable concentricity in Drilling Machines and suitable hand drills. For deep bores, long‑reach maintenance tasks or when access is limited, the Extended Spiral Length enables straight, reliable holes. For optimal results, use steady feed, coolant where appropriate and a stable chuck or collet. Compliance, handling and application guidance Manufactured to DIN 1869 in the Standard Line, the Twist Drill meets expectations for deep‑hole performance in materials up to approximately 1000 N/mm², including grey cast iron and various steels. The bright finished surface eases chip evacuation in many situations. When selecting operating parameters, match cutting speed and feed to the workpiece material and use cooling for ductile or heat‑sensitive metals. The 135° point angle is particularly advantageous for stainless and other hard materials because it reduces spalling and improves centring during penetration. Trust MetavCUT’s Twist Drill for demanding deep‑hole metal work — for personalised technical advice or to confirm suitability for specific tasks please contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel +49 2822 7131930 • WhatsApp +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 33050-FDA Diameter: 5 mm Overall Length: 245 mm Spiral Length: 170 mm Point Angle: 135° Material: HSS‑G Execution: Extra Long Shank Finish: Fully Ground Surface Finish: Bright Finished Model Series: Standard Line Standard: DIN 1869 Application: Drills for metal Suitable For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill is designed primarily for metalworking: alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron, temper castings, non‑ferrous metals and hard plastics, making it a versatile choice for workshop and industrial drilling tasks. How does the fully ground shank benefit drilling accuracy? A fully ground shank on the MetavCUT Twist Drill ensures reduced runout and more precise centring in the chuck or collet, which translates into cleaner holes and improved repeatability in machining operations. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength materials and large drilling diameters. Their geometry allows straightforward regrinding and they withstand higher loads, making them suitable for deep and heavy‑duty drilling in metals. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑thinned (ausgespitzt)? Point thinning reduces the cross‑cut at the tip of the Twist Drill, lowering friction and thus reducing required feed forces while improving centring accuracy in the workpiece. Can a metal Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but it will typically offer poorer guidance and a less clean finish than a dedicated wood drill; however, it is easier to resharpen and shows less self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A through‑hole drilled with a Twist Drill is common practice. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are always superior to HSS is incorrect. Evaluate working conditions carefully to decide whether HSSE’s higher cost is justified for the intended application.
5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — HSS-G Twist Drill, 5 mm, 135° tip, Extra Long, Bright Finished, Fully Ground Shank, DIN 1869 The Twist Drill is an extra long HSS-G drill for Drilling Machines, engineered for deep metal drilling and precision holes in demanding workshop applications. Extra long design for deep drilling HSS-G ground geometry for precise holes 135° tip angle for hard materials Fully ground shank for high runout accuracy Conforms to DIN 1869 for deep-hole applications Engineered for deep metal drilling and higher throughput The Twist Drill is manufactured in HSS-G quality and designed as an extra long tool to reach deeper bore depths than standard bits. This geometry reduces the need for extensions or multi-step drilling, enabling efficient processing of metal components. The combination of ground flute geometry and optimized point form results in up to 40% faster drilling and requires about 50% less feed force, which directly increases productivity and reduces operator fatigue. Precise cutting geometry for tough materials With a 135° tip angle and CNC-ground flutes, this HSS-G bit is tailored to start cleanly in harder materials and maintain concentricity during the cut. The fully ground shank and sharp cutting edges provide excellent runout accuracy and produce clean, burr-reduced holes. Conformance to DIN 1869 signals suitability for deep-hole tasks and use in alloyed and unalloyed steels, grey cast iron, sintered materials and hard plastics when appropriate coolant and speeds are used. Compatibility with drilling machines and usage recommendations Designed for use in a Drilling Machine, the bright finished surface and ground shank simplify clamping and alignment. Due to the grinding process (HSS-G), the tool can be more brittle than rolled types; therefore stationary drilling or proper clamping with coolant is recommended to avoid breakage. Operators will benefit from the bit’s behavior under load: reduced thrust makes handling easier and improves hole quality in serial or repair work. Ideal users and application contexts Metalworking professionals, maintenance technicians and toolroom operators will find this drill especially useful where deep, precise holes in metal are required. The Standard Line model series targets workshops that need reliable, repeatable performance rather than single-use convenience. The extra length and HSS-G construction make it a practical choice for repair jobs, pattern making and production tasks where access is limited. Strong recommendation: For demanding deep-hole metalwork choose the MetavCUT HSS-G Extra Long Twist Drill for reliable penetration and consistent hole quality — for personal technical advice or to confirm suitability for a specific application please contact METAV Werkzeuge directly at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 34050-FDA Diameter: 5 mm Tip Angle: 135° Material: HSS-G Execution: extra long Colour: bright finished Spiral Length: 210 mm Total Length: 315 mm Shank Execution: fully ground For Drilling Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Norm: DIN 1869 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT best used for? The MetavCUT Twist Drill is intended primarily for deep-hole drilling and the machining of high-strength and difficult-to-cut metals; it excels in tasks requiring long reach and consistent hole quality under workshop conditions. Can the MetavCUT Twist Drill be used in a handheld drill? While the MetavCUT Twist Drill can physically be clamped in portable equipment, its HSS-G ground construction and extra length make it best suited to stable Drilling Machines or well-supported setups to minimize the risk of breakage. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high-strength materials and large bore diameters. Its shape is easy to grind and withstands higher loads. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills. Why are twist drills pointed? Pointing reduces the cross-cutting edge at the tip of the Twist Drill. By pointing, friction forces are significantly decreased and lower feed forces are required, while the drill tip centers more precisely in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood but typically provides inferior guidance and a less clean finish than dedicated wood drills. Metal bits are easier to resharpen and have less self-feed tendency. At which depths is the Twist Drill the most used tool? Solid drilling with a Twist Drill is common. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The general belief that HSSE steels are always superior to HSS is incorrect. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified.
5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — 5 mm, 135° Tip, Type N, Bright Finished, Extra Short, DIN 1897, HSS-G The MetavCUT Twist Drill is a precision Type N metal drill designed for handheld and drilling-machine use, offering an extra short design and a 135° tip for reliable performance in harder materials. Extra-short geometry for greater stability HSS‑G construction for high wear resistance 135° tip suited to harder metals Cylindrical shank for universal chuck fit Complies with DIN 1897 for consistent dimensions Increased Cutting Stability and Faster Drilling Thanks to its Extra Short design, this twist drill delivers noticeably higher stability during operation. The reduced overall length lowers the lever arm and diminishes the risk of breakage, which is especially helpful when working in confined spaces or with thin-walled components. The HSS‑G material and optimized flute geometry contribute to a cutting action that requires less axial pressure, enabling faster penetration and improved control with handheld Drilling Machines. Material Suitability and Tip Geometry Benefits The 135° tip angle is engineered for drilling into harder workpieces such as alloyed and unalloyed steels, cast steel and cast iron. A larger tip angle shortens the initial centering phase and reduces walking when starting the hole, so fewer pilot operations are needed. As a Type N drill with a Normal Spiral, it is tailored for metalworking tasks while maintaining acceptable regrinding properties for workshop sharpening. Shank Design and Practical Handling Equipped with a Cylindrical Shank, this twist drill fits conventional three-jaw chucks and allows quick tool changes without specialized adapters. The robust shank form provides universal compatibility, making the drill a practical choice for repair shops and assembly lines using standard chucks. Users should note that for extremely high torque demands, alternate shank types may reduce the risk of slippage. Applications, Efficiency and Target Users This drill excels for technicians, maintenance professionals and craftsmen who require reliable, repeatable metal drilling, including sheet metal, profiles and harder plastics. The DIN 1897 conformity ensures predictable dimensions for production contexts. For those who value speed and reduced operator fatigue, the combination of HSS‑G metallurgy and short geometry achieves up to 40% faster drilling with notably less feed force compared to conventional HSS drills. Highly recommended: the MetavCUT Twist Drill (Type N) for precise metalworking — for tailored advice or technical clarification contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 56050-FDA Diameter: 5 mm Tip angle: 135° Execution: Extra short Colour: Bright finished Material: HSS-G Standard: DIN 1897 Shank: Cylindrical Total length: 62 mm Spiral length: 26 mm Type: Type N Application: Drills for metal Model series: Standard Line Intended machine: Drilling Machine (Hand Drill) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill (Type N) best used for? The MetavCUT Twist Drill (Type N) is primarily intended for metalworking applications; it is used for drilling alloyed and unalloyed steel, cast steel, cast iron and hard plastics, offering robust performance in demanding machining tasks. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength materials and larger drill diameters; its form is easy to resharpen and endures higher loads, making it suitable for professional metalwork. Which three drill types exist? Typical drill categories are metal drills, wood drills and stone/concrete drills, each optimised for material‑specific cutting geometry and flute design. Why are twist drills sharpened at the tip? The sharpening reduces the cross‑edge at the drill tip, lowering friction so that less feed force is required and the tip centres more accurately in the workpiece. Can a metal twist drill be used to drill wood? A metal (HSS) drill can be used in wood but will have reduced guidance and a less clean finish compared with a dedicated wood drill; however, they are easier to resharpen and have a lower tendency to self‑feed. For which drilling depths is the twist drill the most used tool? A twist drill is the typical choice for drilling through solid stock; it is most commonly used for diameters up to 20 mm and depths up to 100 mm.
5mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Die Kombination aus geschliffener HSS-G-Geometrie, formschlüssigem Sechskant-Schaft und DIN‑338‑Konformität sorgt für präzise Metallbohrungen bei geringem Kraftaufwand; bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung per E‑Mail an. Spiralbohrer 5 mm HSS-G | MetavCUT Standard Line Der Spiralbohrer ist ein geschliffener HSS‑G‑Bohrer für präzise Metallbohrungen in Werkstatt und Produktion, geeignet für Handbohrmaschine und stationäre Maschinen Spiralbohrer »Spiralbohrer« von MetavCUT HSS-G geschliffen für präzise Metallbohrungen Sechskant-Schaft für sicheren Sitz im Schnellwechselhalter 5 mm Durchmesser, ideal für Werkstatt und Montage DIN 338 konform, kurze Spiralform für stationäre Maschinen Präzision und Effektivität bei Metallbohrungen Dank der HSS-G‑Ausführung bietet dieser Bohrer eine sehr scharfe Schneidkante und eine hohe Rundlaufgenauigkeit, was saubere und maßhaltige Bohrlöcher in legierten wie unlegierten Stählen ermöglicht. Die geschliffene Geometrie reduziert Reibung und ermöglicht ein bis zu 40 % schnelleres Arbeiten bei gleichzeitig 50 % weniger Anpresskraft, wodurch Arbeitszyklen verkürzt und Anwender entlastet werden. Diese Vorteile zeigen sich besonders bei häufigen Bohrvorgängen in Werkstatt und Montage. Passende Anwendungen und Maschinentypen Im Standard‑Bereich mit 5 mm Durchmesser eignet sich der Bohrer für den allgemeinen Maschinenbau, Instandsetzung und DIY‑Projekte. Der Bohrer kann sowohl in Handbohrmaschine als auch in stationären Säulenbohrmaschinen eingesetzt werden; bei handgeführten Geräten empfiehlt sich das Anpunkten mit einem Zentrierbohrer zur Verbesserung der Treffgenauigkeit. Für sehr tiefe Löcher, gehärtete Werkstoffe oder hochpräzise Passungen sind spezialisierte Lösungen empfehlenswert. Handhabung, Haltbarkeit und Anwendungstipps Der Sechskant‑Schaft gewährleistet formschlüssigen Halt im Schnellwechselhalter und reduziert das Durchrutschen bei hohen Drehmomenten. Weil geschliffene HSS‑Werkzeuge tendenziell spröder sind, empfiehlt sich eine sinnvolle Kühlschmierung und kontrollierte Vorschubgeschwindigkeit, vor allem bei Gussstahl oder dickem Material. Bei tiefen Bohrungen sollte die Bohrtiefe das Fünffache des Durchmessers nicht überschreiten, ohne mehrstufig aufzubohren. Für wen dieser Bohrer entwickelt wurde Handwerkliche Betriebe, Instandhalter und Werkstätten profitieren von der Kombination aus MetavCUT‑Qualität und der Normenkonformität nach DIN 338, die kurze Spiralbohrer mit Zylinderschaft definiert. Die Standard Line wurde für Anwender entwickelt, die verlässliche, wiederholbare Ergebnisse bei Metallbearbeitung suchen, ohne auf Wirtschaftlichkeit zu verzichten. Profitieren Sie von der geschliffenen HSS‑G‑Technologie der MetavCUT Standard Line und fordern Sie Ihr Angebot sowie technische Beratung direkt bei Metav Werkzeuge per E‑Mail an: info@metav-werkzeuge.com Produktmerkmale Artikelnummer: 57050-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Material: HSS-G (geschliffen) Norm: DIN 338 Daten Durchmesser: 5 mm Gesamtlänge: 105 mm Spirallänge: 52 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Ausführung: geschliffen (CNC‑Schliff für präzise Geometrie) Schaftausführung: Sechskant Farbe: Silber Verwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Hersteller: MetavCUT SKU: 57050-FDA FAQ Ist der Bohrer für Akkuschrauber geeignet? Der MetavCUT Spiralbohrer mit Sechskant‑Schaft lässt sich in vielen Schnellwechselhaltern von Akkuschraubern einsetzen; bei intensiver Nutzung empfiehlt sich jedoch der Einsatz stationärer Maschinen oder eine Handbohrmaschine für erhöhte Stabilität. Welche Materialien können mit diesem Spiralbohrer bearbeitet werden? Der HSS‑G‑Spiralbohrer von MetavCUT eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Nichteisenmetalle sowie harte Kunststoffe; bei sehr zähen oder gehärteten Werkstoffen sind spezielle Hartmetallwerkzeuge vorzuziehen. Wie erhöht man die Lebensdauer des geschliffenen Bohrers? Kühlung und moderate Schnittgeschwindigkeit verlängern die Standzeit; zudem reduziert korrektes Anpunkten und das Vermeiden übermäßiger Vorschubkräfte das Bruchrisiko bei HSS‑G‑Werkzeugen. Was bedeutet die Angabe DIN 338 für den Anwender? DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft; für den Anwender signalisiert das Normkonformität und Kompatibilität mit gängigen Aufnahmen sowie reproduzierbare Maße und Toleranzen. Welche Vorteile bringt der Sechskant‑Schaft? Der Sechskant‑Schaft sorgt für formschlüssige Drehmomentübertragung in Schnellwechselhaltern, erleichtert schnellen Werkzeugwechsel und verringert das Durchrutschen im Vergleich zu runden Schäften.
5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Profitieren Sie von hoher Stabilität und schneller Bohrleistung durch die Kombination aus HSS-G und TIN-beschichtet sowie der kurzen Ausführung für präzise Metallbearbeitung. Bestellen Sie den Spiralbohrer direkt über MetavCUT oder nutzen Sie die Fachberatung bei technischen Fragen. Spiralbohrer von MetavCUT – kurze Ausführung für präzises Bohren in Metall Spiralbohrer kurz, geeignet für stationäres und mobiles Bohren in legierten und unlegierten Stählen sowie Nichteisenmetallen Kurze Ausführung für höhere Stabilität Geschliffene Geometrie für saubere Bohrlöcher TIN-beschichtet für längere Standzeit Spitzenwinkel 135° für harte Werkstoffe Für Handbohrmaschine und stationäre Maschinen geeignet Höhere Stabilität und präzise Bohrergebnisse Die kurze Bauform reduziert die Auskraglänge und verbessert dadurch die Stabilität beim Bohren. Durch die geringere Neigung zum Verbiegen lassen sich präzisere Bohrungen erzielen, besonders bei harten Werkstoffen wie Stahl. Diese Eigenschaft führt zu wiederholbar sauberen Bohrbildern und reduziert den Aufwand für Nacharbeit. Materialwahl und Beschichtung für lange Nutzungsdauer Der geschliffene HSS-G Rohstoff kombiniert Schärfe mit hoher Schnittfestigkeit, während die TIN-beschichtet Oberfläche Reibung und Verschleiß reduziert. Bei geeigneter Kühlung entstehen weniger Wärme und längere Standzeiten, was die Wirtschaftlichkeit in Werkstatt und Produktion erhöht. Praxisgerechte Geometrie und Einsatzbereiche Die Normalspirale Typ N mit 135° Spitzenwinkel eignet sich gezielt für legierte und unlegierte Stähle, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe. In Fertigung und Instandsetzung bietet diese Ausführung zuverlässige Ergebnisse bei mittleren bis anspruchsvollen Aufgaben, ohne aufwendige Werkzeugwechsel. Empfehlung für Maschinenbetrieb und Bearbeitungsablauf Bei stationärer Verwendung mit einer Handbohrmaschine oder Säulenbohrmaschine sorgt die geschliffene Spirale für guten Spanfluss und reduziert den Kraftbedarf um bis zu 50 % gegenüber herkömmlichen HSS-Bohrern. Vorbohren bei größeren Durchmessern und passende Kühlung verlängern die Lebensdauer weiter. Mit dem MetavCUT kurzen HSS-G-Bohrer präzise und langlebig bohren – Fachberatung und Lieferung direkt aus Emmerich unter info@metav-werkzeuge.com oder per Telefon +49 2822 7131930 Produkteigenschaften Artikelnummer: 46050-FDA Bezeichnung: Spiralbohrer Marke: MetavCUT Serie: Standard Line Material: HSS-G Daten Durchmesser: 5 mm Gesamtlänge: 86 mm Spirallänge: 52 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Norm: DIN 338 Schaftausführung: geschliffen Beschichtung: TIN-beschichtet (Titan-Nitrid für Verschleißschutz) Typ: Typ N (Normalspirale für Metall) Für: Handbohrmaschine HSS-G: Schnellarbeitsstahl, geschliffen Modellserie: Standard Line FAQ Für welche Werkstoffe ist der Bohrer geeignet? Der Spiralbohrer von MetavCUT (Typ N, SKU 46050-FDA) ist ausgelegt für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetalle und Hartkunststoffe. Ist die kurze Ausführung für Handgeführte Geräte geeignet? Ja, die kurze Bauform des geschliffenen HSS-G-Bohrers verbessert die Stabilität bei Handbohrmaschinen und reduziert die Gefahr des Verkantens gegenüber langen Ausführungen. Wie wirkt sich die TIN-Beschichtung auf die Standzeit aus? Die TIN-beschichtung reduziert Reibung und thermische Belastung, wodurch die Standzeit bei metallischen Bearbeitungen deutlich erhöht wird, besonders in Kombination mit Kühlung. Welche Vorteile bietet der Spitzenwinkel 135°? Mit einem Spitzenwinkel von 135° dringt der Bohrer kraftsparender in harte Werkstoffe ein und reduziert das Abgleiten beim Anbohren, was saubere und rechtwinklige Bohrungen fördert. Muss der Bohrer vorgebohrt werden? Bei diesem Durchmesser (5 mm) ist Vorbohren in der Regel nicht erforderlich; bei größeren Zielmaßen empfiehlt sich jedoch die schrittweise Aufbohrung zur Entlastung der Querschneide.
5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G Twist Drill, 5 mm, 135° point angle, Bright Finished, DIN 340 A Twist Drill designed for Drilling Machine use: long HSS‑G construction with 5 mm diameter and a 135° point angle for deep, precise Metal drilling. Long design for deeper or hard-to-reach holes HSS‑G ground flutes for precise metal drilling 135° point angle for harder materials like stainless steel Fully ground shank for improved concentricity Exceptional Wear Resistance and Precise Metal Cutting This long HSS‑G Twist Drill is engineered for demanding metalworking tasks. The ground flute geometry produces sharp cutting edges and high concentricity, which leads to clean, accurate holes with less runout. For the user, this translates into fewer reworks and a more consistent fit for pins or fasteners. The 135° point angle reduces initial biting on hard materials, enabling controlled engagement when machining steels up to 900 N/mm². Use in stationary setups or with appropriate cooling yields the best tool life. Designed for Deep Holes and Hard-to-Reach Positions When access is limited, the extended overall length and longer spiral length provide the reach necessary for through and deep blind holes. The long design follows DIN 340 conventions for extended drills and is especially suitable for bushings and sleeves where depth is critical. The fully ground shank ensures the tool runs true in chucks and collets, improving surface finish and hole geometry. This configuration benefits machinists who need dependable performance in production and repair operations. Clear Advantages for Professional Workshops Workshops that process alloyed and unalloyed steels, cast materials, and engineering plastics will appreciate the combination of HSS‑G material and precision grinding. The ground Twist Drill requires up to 50% less feed force and can drill up to 40% faster in comparable conditions versus conventional HSS variants. For operators, that means reduced physical strain and increased throughput without sacrificing hole quality. The bright finished surface supports easy chip evacuation in many metalworking scenarios. Practical Guidance and Application Notes For best results, select appropriate spindle speed and apply cutting fluid or coolant when machining hard materials to avoid thermal stress. The 135° point angle is well suited for stainless and tempered steels, reducing the tendency to chatter during entry. Regrinding is feasible but should be performed by experienced personnel to maintain geometry; ground tools can be more brittle than rolled types and benefit from stable fixturing. If uncertain about optimal parameters for a specific material, consult technical support. Strong recommendation: Choose the MetavCUT long HSS‑G Twist Drill for deep, accurate metal drilling and contact METAV Werkzeuge for expert technical advice — 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 53050-FDA Diameter: 5 mm Point angle: 135° Overall length: 132 mm Spiral length: 87 mm Execution: long Colour: Bright finished Shank: Fully ground Material: HSS‑G Standard: DIN 340 Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill (long HSS‑G) is primarily applied to the machining of high‑strength materials and larger drill diameters. Its ground geometry is easy to resharpen and withstands significant loads, making it suitable for deep holes and demanding Metalworking tasks. Which 3 drill types are there? The main categories are Metal drills, Wood drills and Stone/Concrete drills. Each type is optimized for material properties and cutting geometry to ensure the best drilling result.
6.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 6.1 mm, HSS, Short, 118° Tip, Black, DIN 338 by MetavCUT The Twist Drill is a short HSS metal drill designed for precision drilling in steel and non-ferrous metals, suitable for Hand Drills and Drilling Machines. Short HSS design for high stability Conforms to DIN 338 for short cylinder shank drills 118° tip for reliable centring and entry Suitable for alloyed and unalloyed steel and non-ferrous metals Robust black finish for workshop durability Precision and Stability for Metalworking The Twist Drill (MetavCUT, Type N) with a 6.1 mm diameter and 118° tip offers increased rigidity thanks to its Short overall length. This reduced overhang minimises bending and runout, which improves hole accuracy when used in Hand Drills or stationary Drilling Machines. For tasks that demand repeatable, concentric holes in metal, the short geometry delivers better guidance and less vibration than longer bits, resulting in cleaner results and longer tool life. Standardised Short Design for Consistent Results Manufactured to DIN 338, the Twist Drill (MetavCUT, Type N) follows the classification for short spiral drills with cylinder shank. The standard ensures defined dimensions, tolerances and compatibility with common chucks, making tool changeover straightforward. Because the geometry and length are standardised, repeat production and jig-based operations benefit from predictable performance and easier quality control. HSS Material and Application Recommendations Made from HSS (High Speed Steel), this Twist Drill is optimised for standard metalworking tasks. The roll-walzed production process yields a tougher, more elastic flute body that reduces fracture risk, especially for diameters below 6 mm. Recommended materials include alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. When used in harder materials, adapted speeds and cutting fluids extend life; for softer materials the 118° tip aids initial centring and reduces walking. Target Users and Practical Advantages Designed for workshops, maintenance technicians and hobbyists who require robust, repeatable drilling in metal, the Twist Drill (MetavCUT, Type N) shines in setups where stability and precision matter. The short execution supports precise manual drilling and machine operations alike. For users unsure about drill selection or compatible machine settings, METAV Werkzeuge offers competent advice to match the drill to the workpiece and machining conditions. Strong recommendation: For reliable metal drilling choose the MetavCUT Twist Drill Type N with 6.1 mm diameter and 118° tip — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill / Spiralbohrer Brand: MetavCUT SKU: 40061-FDA Diameter: 6.1 mm Tip angle: 118° Type: Type N Material: HSS (High Speed Steel) Execution: Short Colour: Black Spiral length: 57 mm Total length: 101 mm For use in: Hand Drill / Drilling Machine Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N best used for? The Twist Drill from MetavCUT (Type N) is primarily designed for drilling metal; it is well suited to alloyed and unalloyed steels, cast iron and non‑ferrous metals where a robust, standard short HSS geometry is required. Can the MetavCUT Twist Drill Type N be used in a hand drill? Yes, the Twist Drill (MetavCUT, Type N) is suitable for Hand Drills as well as Drilling Machines; its short overall length increases stability and reduces the risk of breakage during manual operation. For what is a Twist Drill used? A Twist Drill (MetavCUT, Type N) is mainly applied to the machining of high‑strength workpieces and larger hole diameters; its form is easy to resharpen and it withstands higher loads, which makes it the tool of choice for many metalworking tasks. Which three drill types are common? Common drill types include Metal Drill, Wood Drill and Stone/Concrete Drill, and the MetavCUT Twist Drill corresponds to the Metal Drill category. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑cut at the tip of the Twist Drill (MetavCUT, Type N), lowering friction forces and thus reducing required feed forces while improving centring in the workpiece. Can a metal Twist Drill be used in wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but it typically provides poorer guidance and a less clean finish than dedicated Wood Drills; however it is easier to resharpen and has lower self‑feeding tendency. For which drilling depths is the Twist Drill most used? A solid hole is commonly executed with a Twist Drill (MetavCUT, Type N). For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general assumption that HSSE is always superior to HSS is incorrect; choosing between HSS and HSSE for a MetavCUT Twist Drill (Type N) depends on working conditions and whether the higher acquisition cost of HSSE is justified by the specific application.
6.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Spiralbohrer — Twist Drill Type N (Ø 6.1 mm, 135°, short, 5% cobalt-alloyed, HSS‑E, DIN 338) The Spiralbohrer Twist Drill Type N is a short HSS‑E drill designed for precision drilling in metal with enhanced stability and wear resistance. Short design for higher stability 135° point angle for hard materials HSS‑E with 5% cobalt for wear resistance Fully ground shank for precise centring DIN 338 compliance for standardised quality Increased Precision and Stability for Metalworking A short Twist Drill with reduced overall length improves stability and reduces bending during operation, which is especially important when working with tougher metals. The combination of a short design and a fully ground shank ensures consistent concentricity in the chuck and cleaner holes under load. Professionals who demand repeatable, accurate results will value the greater rigidity compared with longer counterparts, making this tool well suited for demanding drilling tasks in workshop and production environments. Material Composition and Why 5% Cobalt Matters The HSS‑E material with 5% cobalt increases hot hardness and wear resistance, allowing the Twist Drill to retain cutting performance at higher temperatures typical when drilling stainless steel and alloyed steels. The cobalt alloy improves service life and reduces frequent regrinding cycles, so fewer tool changes are required during longer runs. For users unfamiliar with HSS‑E, it is a high‑speed steel variant alloyed for improved durability when cutting hard materials. Optimised Geometry for Hard Materials With a 135° point angle and Type N normal spiral geometry, this short Twist Drill is optimised for entering and cutting harder materials while reducing walking and chatter on the surface. The larger point angle reduces the tendency to dig in on the first contact and shortens the effective penetration time, which benefits drilling in stainless steel and similar alloys. For routine metal fabrication tasks where precision and tool life matter, this geometry provides a reliable balance between entry behaviour and chip evacuation. Intended Use and Who Benefits Most Designed primarily as a drill for metal, this Twist Drill Type N suits metalworkers, toolroom technicians and production engineers requiring reliable holes in alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. The short execution makes it ideal for bench drills and smaller drilling machines where minimised overhang leads to better outcomes. If the application involves long reach or deep through‑holes, a different drill length should be selected to match the task. Handling, Cooling and Regrinding Tips To get the best lifetime from a short HSS‑E Twist Drill, use appropriate cutting speeds, steady feed and suitable coolant when machining harder alloys. The fully ground flute geometry provides sharp cutting edges and precise hole quality but can be more brittle than rolled alternatives; therefore controlled feeds and coolant reduce thermal stress and risk of breakage. When regrinding, keep the original point geometry to maintain the centring behaviour and the characteristic 135° angle for hard materials. For precise metal drilling choose MetavCUT quality: the short Twist Drill Type N offers the stability and heat resistance that professionals value — for technical questions or personalised advice contact METAV Werkzeuge. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47061-FDA Diameter: 6.1 mm Spiral length: 63 mm Overall length: 101 mm Point angle: 135° Type: Type N Execution: short Material: HSS‑E Colour: 5% cobalt-alloyed Shank finish: fully ground For drilling machine: Drilling Machine Norm: DIN 338 Application: Drills for metal Model series: Standard Line Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Spiralbohrer Twist Drill Type N best used for? The Spiralbohrer Twist Drill Type N by MetavCUT is primarily intended for drilling metal; its short execution and Type N geometry make it particularly suitable for precision holes in alloyed and unalloyed steels, cast iron, non‑ferrous metals and plastics. Can the Spiralbohrer Twist Drill be used on stainless steel and hard alloys? Yes. The Spiralbohrer Twist Drill Type N with HSS‑E material and 5% cobalt from MetavCUT is designed for higher hot hardness and wear resistance, which improves performance when drilling stainless steel and other harder alloys. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger drill diameters. This form is easy to regrind and withstands higher loads, which is why it is commonly used for tougher metalworking operations. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills tip‑pointed (ausgespitzt)? The tip pointing reduces the cross‑cut at the drill tip, which significantly lowers friction and therefore requires less feed force. At the same time the pointed tip centres the drill more reliably in the workpiece. Can a Twist Drill be used to drill wood? A metal drill can be used in wood, but guidance is poorer and the hole finish is less clean. Metal drills are easier to regrind and have lower self‑feed tendency compared with dedicated wood bits. For which drilling depths is the Twist Drill most used? A solid hole is typically produced with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are always superior to standard HSS is not universally true. When choosing, assess whether your working conditions justify the higher initial cost of HSSE for the expected benefits.
6.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short, 6.1 mm, 135° tip, HSS‑G, Bright Finished (DIN 338) The Twist Drill short Type N is a precision Drilling Machine bit designed for stable, fast metalworking, especially suited to hardened materials and demanding workshop applications. Short design for increased rigidity and accuracy Sharp 135° tip for harder materials HSS‑G ground for clean, concentric holes Fully ground shank for excellent runout accuracy Conforms to DIN 338 for short twist drills Engineered for higher drilling performance in metalworking This short Twist Drill from MetavCUT delivers a performance-oriented solution for metal fabrication: the HSS‑G material and optimized geometry enable faster material removal with reduced drilling forces. The ground flute geometry creates very sharp cutting edges that produce clean, precise holes and reduce burr formation. For craftsmen and production workshops, this means shorter cycle times and more reliable hole quality when processing legierte and unlegierte steels, cast steels and non‑ferrous metals. Short length increases rigidity and improves accuracy A reduced overall length significantly reduces the cantilevered section protruding from the chuck, which increases stability and lowers the risk of bending under load. This makes the short Type N Twist Drill particularly suitable for precise operations on a Drilling Machine and for drilling in hard materials where deflection would compromise hole accuracy. Operators will notice improved concentricity and less chatter compared with longer tools. Ground HSS construction explained and practical benefits The designation HSS‑G (ground High Speed Steel) denotes that the flute geometry is produced by CNC grinding rather than rolling. This results in extremely sharp cutting lips and high dimensional accuracy, which is advantageous for demanding metalworking. A potential drawback is higher brittleness compared with rolled variants, so use with appropriate coolant and in a stable clamping setup for best results. The 135° tip angle is chosen to reduce initial cutting forces and to suit harder materials such as stainless steel. Where this tool is most effective and who benefits Workshops, toolrooms and industry professionals who require repeatable, precise holes in metals will find the Twist Drill short Type N especially useful. The design targets applications up to typical diameters and depths encountered in component manufacture, repair and assembly. Its characteristics make it a rational choice for tasks requiring tight tolerances and reliable hole geometry rather than for soft‑wood or masonry applications. For precision metal drilling, choose the MetavCUT Twist Drill short Type N — METAV Werkzeuge offers expert advice and technical support at info@metav-werkzeuge.com or by phone +49 2822 7131930; WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 45061-FDA Diameter: 6.1 mm Total length: 93 mm Spiral length: 57 mm Tip angle: 135° Type: Type N Material: HSS‑G (ground High Speed Steel) Finish/Colour: Bright finished Execution: Short Shank: Fully ground For use in: Drilling Machine (Handheld Drilling Machines not recommended for highest precision) Standard: DIN 338 Model series: Standard Line Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill short Type N suitable for? The MetavCUT Twist Drill short Type N is intended primarily for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics thanks to its HSS‑G construction and 135° tip. Is coolant recommended when using the MetavCUT Twist Drill Type N? Using coolant or cutting fluid with the MetavCUT Twist Drill short Type N is recommended for prolonged tool life and improved chip evacuation, especially when drilling harder materials and when aiming for the best surface finish and dimensional stability. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high‑strength materials and large hole diameters. Its form allows relatively easy re‑grinding and it endures higher loads, which makes it suitable for tasks requiring robustness and repeatable performance. Which three drill types exist? The three primary drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills re‑pointed? Re‑pointing reduces the cross‑cut at the tip of a Twist Drill. By re‑sharpening the point, friction forces are significantly lowered, which reduces required feed forces and improves centring in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but the guidance is worse and the hole finish is less clean. Metal drills are easier to re‑sharpen and exhibit less self‑feeding in soft materials. At which drilling depths is the Twist Drill most commonly used? The Twist Drill is the most used tool for through drilling. For diameters up to around 20 mm and drilling depths up to 100 mm, the Twist Drill is commonly employed. Is HSS or HSSE better? The general belief that HSSE steels are universally superior to HSS is incorrect. When choosing between HSS and HSSE for a MetavCUT Twist Drill Type N, assess whether your working conditions justify the higher cost of HSSE for your specific application.
6.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 6.25 mm, HSS, short, black, DIN 338 The Twist Drill Type N is a short HSS metal drill designed for stable, precise drilling in steel and other metals using handheld drills or drilling machines. Twist Drill Type N for metal drilling Short HSS design for enhanced stability DIN 338 compliant for short cylindrical drills 118° tip angle for reliable centering Suitable for drilling machines and hand drills Stable performance for demanding metalwork The Twist Drill from MetavCUT combines a short fluted design with HSS material to deliver high rigidity and reduced deflection when drilling into metal. Because the cutter length is reduced relative to standard drills, vibration and runout are minimised, which directly improves hole accuracy and extends tool life. This stability benefits maintenance technicians and workshop professionals who require repeatable centre-to-centre accuracy on metal fabrications. Precise centring and cleaner hole starts A 118° tip angle provides a balanced compromise between initial penetration and centring behaviour, making the drill well suited to typical steels and general metalwork. The geometry lowers the tendency to “walk” on curved or painted surfaces, so fewer pilot holes are needed and setup time is reduced. Users achieve cleaner hole edges and consistent drilling results even when working without elaborate jigs. Standardised dimensions for dependable tooling choices Compliance with DIN 338 ensures the short cylindrical shank and overall geometry match common toolholder and chuck standards, simplifying tool selection and replacement. The HSS designation (High Speed Steel) indicates good toughness and edge retention for standard metal drilling tasks. This combination enables workshops to maintain inventory consistency while choosing a tool that balances cost and performance. Application range and user guidance Engineers, metal fabricators and service technicians will find this Type N drill particularly useful for general-purpose drilling in alloyed and unalloyed steels, cast iron and non-ferrous metals. For best results, select proper cutting speeds and use cutting fluid when drilling steels above moderate hardness; this reduces heat, preserves the cutting edge and improves cycle time. Note that for very soft materials or abrasive masonry, material-specific drills are preferable. Strong recommendation: For precision metal drilling choose the MetavCUT Twist Drill Type N with short HSS design — METAV Werkzeuge offers expert advice and technical support via info@metav-werkzeuge.com, phone +49 2822 7131930 and WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 400625-FDA Diameter: 6.25 mm Material: HSS (High Speed Steel) Type: Type N Execution: short Colour: black Tip angle: 118° Spiral length: 57 mm Overall length: 101 mm Standard: DIN 338 Application: Drills for metal For drill machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT used for? The MetavCUT Twist Drill Type N is primarily applied to metalworking tasks; it is intended for drilling into high-strength materials and larger diameters where robust performance is required. Its form allows relatively easy resharpening and it tolerates higher loads during cutting. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for steel and similar materials. Why are twist drills pointed? Pointing the tip of a twist drill reduces the cross-cutting edge at the tip, which significantly lowers friction and required feed forces; this sharpening also improves centre holding so the drill seats more accurately in the workpiece. Can a Twist Drill be used to drill wood? A metal-oriented Twist Drill such as the MetavCUT Type N can be used in wood, but guidance is reduced and the finish is typically less clean than with a dedicated wood bit; advantages include easier resharpening and less aggressive self-feeding. At what drilling depths are twist drills most commonly used? Twist drills are the standard choice for through-hole drilling; they are most frequently used for diameters up to 20 mm and drilling depths up to about 100 mm, making them suitable for typical workshop operations. What is better, HSS or HSSE? The assumption that HSSE is always superior to HSS is not universally correct; decision-making should consider working conditions and whether the slightly higher investment in HSSE is justified by the specific application.
6.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die kompakte Kombination aus HSS‑G Material, geschliffenem Schaft und 135° Spitzenwinkel liefert schnelle, präzise Bohrungen in Stahl bei hoher Rundlaufgenauigkeit. Bestellen Sie den Spiralbohrer 6,25 mm von MetavCUT direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 6,25 mm HSS‑G Kurz (Typ N) — MetavCUT, SKU 450625-FDA Der Spiralbohrer ist ein kurzer, geschliffener HSS‑G Metallbohrer für präzise Bohrungen in legierten und unlegierten Stahl sowie Gusswerkstoffe. Spiralbohrer 6,25 mm HSS‑G, kurz Geschliffener Schaft für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für harte Werkstoffe Spiralänge 63 mm für stabile Spanabfuhr Geeignet für Handbohrmaschine und Stationär Präzision und Effizienz bei harten Werkstoffen Der kurze, geschliffene HSS‑G Kurzbohrer reduziert die Auskraglänge und damit das Verbiegen und Vibrieren während des Bohrens. Dadurch entsteht eine deutlich höhere Stabilität, was besonders bei legierten Stählen und Temperguss wichtig ist. Die geschliffene Geometrie sorgt für sehr scharfe Schneiden und saubere Bohrlöcher, während der 135° Spitzenwinkel das Anbohren in harten Werkstoffen erleichtert und die Anbohrzeit reduziert. Geeignet für Werkstatt und mobile Anwendung Im Standard‑Bereich von 2,0 mm bis 13,0 mm bietet dieser Kurzbohrer ein ausgewogenes Verhältnis aus Handhabung und Leistung. Die Ausführung als Typ N mit normaler Spirale macht ihn prädestiniert für den Einsatz in der Handbohrmaschine ebenso wie in stationären Bohrmaschinen. Bei der Nutzung in mobilen Geräten empfiehlt sich eine stabile Spannaufnahme und moderate Drehzahlen, um die Bruchsicherheit zu erhöhen. Normkonforme Fertigung und Materialeigenschaften Die Herstellung richtet sich nach DIN 338, die kurze Spiralbohrer mit Zylinderschaft normiert. Die Kombination aus HSS‑G und geschliffenem Schaft bedeutet: hohe Schneidleistung und exakte Rundlaufwerte. Geschliffene Bohrer bieten feinste Schneidkanten und enge Toleranzen; sie sind jedoch empfindlicher gegenüber Schockbelastungen, weshalb Kühlung und gleichmäßiger Vorschub empfohlen werden. Anwendungshinweise und arbeitssicherheit Für optimale Ergebnisse wird die Verwendung von Schneidöl oder Kühlmittel empfohlen, besonders beim Bohren in gehärtetem Stahl. Vorbohren ist bei sehr dicken oder zähen Werkstoffen empfehlenswert, um die Querschneide zu entlasten. Die kurze Spiralänge von 63 mm unterstützt die Spanabfuhr bei üblichen Bohrtiefen; bei tiefen Sacklochbohrungen sind abgestufte Aufbohrschritte zu erwägen, um Überhitzung und Spanverwicklung zu vermeiden. MetavCUT empfiehlt diesen HSS‑G Kurzbohrer für präzise Metallbohrungen; bei Fragen zur Einsatzoptimierung erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 450625-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Typ: Typ N Fakten Durchmesser: 6,25 mm Gesamtlänge: 101 mm Spirallänge: 63 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaft Ausführung: geschliffen (vollständig geschliffener Zylinderschaft) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich der Bohrer am besten? Der Kurzbohrer von MetavCUT (Spiralbohrer 6,25 mm, Typ N, SKU 450625-FDA) eignet sich besonders für legierte und unlegierte Stähle, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe aufgrund des HSS‑G Werkstoffs und des 135° Spitzenwinkels. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die Ausführung ist für die Nutzung in der Handbohrmaschine geeignet; dennoch ist auf eine feste Spannaufnahme und moderate Drehzahl zu achten, damit der geschliffene Bohrer nicht durch seitliche Kräfte beschädigt wird. Warum ist geschliffener HSS besser für Metallbohrungen? Geschliffene HSS‑Bohrer bieten sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher erzeugt. Beim Spiralbohrer MetavCUT bedeutet das bessere Oberflächenqualität, allerdings erhöhte Empfindlichkeit gegen Stoßbelastungen. Ist Kühlung beim Bohren mit diesem Bohrer erforderlich? Bei harten oder dicken Werkstoffen wird Kühlung oder Schneidöl empfohlen, um Überhitzung zu vermeiden und die Standzeit des HSS‑G Bohrers zu verlängern. Dies gilt insbesondere bei stationärem Einsatz und höheren Vorschubkräften. Benötigt man Vorbohren für größere Bohrtiefen? Bei tiefen Bohrungen oder zähen Werkstoffen empfiehlt sich Vorbohren oder mehrstufiges Aufbohren zur Entlastung der Querschneide; der Kurzbohrer ist für typische Anwendungen im Standard‑Bereich konzipiert.
6.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, Ø 6.2 mm, 118°, black, DIN 338, MetavCUT The Twist Drill Type N short HSS is a precision metalworking drill with a 6.2 mm diameter, a 118° tip angle and a compact design for stable, accurate holes in metal. Short HSS design for improved stability DIN 338 compliant short twist drill 6.2 mm diameter for precise metal holes 118° tip for controlled entry Suitable for drilling machines and hand drills Stable drilling for accurate metal holes The short HSS construction reduces overhang and vibration, delivering higher stability and more precise results when machining metal. Because the flute length is reduced, the tool resists bending and provides consistent concentricity in through-holes. This results in cleaner bores and less rework when working on components that demand tight tolerances. Material and geometry explained for reliable results Made from High Speed Steel (HSS), the drill combines toughness with wear resistance ideal for common metalworking tasks. The 118° tip angle eases centring on curved or softer surfaces and lowers the initial cutting forces; this geometry is particularly effective for general metal grades and reduces the chance of walking at the start of the hole. Short drills per DIN 338 are optimised for rigid setups and stationary or portable drilling machines. Where this drill excels and who benefits Designed primarily as a Drills for Metal tool, the Type N short configuration suits workshops, toolrooms and maintenance pros seeking repeatable performance in steel, cast iron, non-ferrous metals and plastics. The compact format is beneficial for confined setups or when using hand-held drilling devices, delivering greater control and faster, more reliable hole-making for production and repair tasks. Choose the MetavCUT Twist Drill Type N short HSS for dependable metal drilling — for personalised technical advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40062-FDA Diameter: 6.2 mm Spiral length: 57 mm Overall length: 101 mm Tip angle: 118° Type: Type N Execution: short Material: HSS Colour: black Suitable for: Drilling Machine (Hand Drill) Application: Drills for Metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N by MetavCUT used for? The MetavCUT Twist Drill Type N is primarily used for machining metal; it is particularly suitable for drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and certain plastics. Its short HSS design makes it robust for demanding tasks and larger drill diameters where stability and precision are required. Which three drill types are commonly available? Common drill categories are metal drills, wood drills and stone/masonry drills. The MetavCUT Twist Drill Type N falls into the metal drills group and is tailored to metalworking applications.
6.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Type N) — 6.2 mm, 135° tip, short HSS‑E, 5% cobalt‑alloyed, DIN 338 — MetavCUT A Twist Drill (Type N) designed for precise metal drilling, combining a 6.2 mm diameter and a 135° tip angle in a short, stable execution suitable for demanding machining tasks. Type N Twist Drill, 6.2 mm diameter 135° tip angle for hard materials Short execution for higher stability HSS‑E with 5% cobalt for improved toughness Fully ground shank, DIN 338 compliant Exceptional stability and precision for metalworking Short-form drills deliver measurable advantages when precision matters. The short design of this MetavCUT Twist Drill reduces the unsupported overhang, which increases stability and lowers the tendency to wander or bend under load. Combined with the 135° tip angle, the geometry shortens pilot time and improves centring in harder materials. For production environments that require repeatable hole quality, the shorter spiral length also reduces vibration and contributes to more consistent hole diameter and surface finish. Material composition for longer life under stress Constructed from HSS‑E and alloyed with 5% cobalt, this short Twist Drill offers higher hot hardness and greater wear resistance than standard HSS. The cobalt content increases toughness at elevated temperatures, making the tool more suitable for drilling alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The fully ground flute geometry provides very sharp cutting edges and high running accuracy; however, grinding can increase brittleness, so coolant use and stable clamping are recommended to maximise tool life. Designed for drilling machines and demanding applications Classified to DIN 338, this Type N drill is the classical metal drill geometry optimised for machining of metallic workpieces on drilling machines. The shorter overall length and fully ground spiral make it particularly suited to stationary machines and operations that require high precision rather than freehand drilling. Typical applications include workshop fabrication, maintenance, toolmaking and any task where controlled drilling into Steel and similar materials is required. Note that Type N is not optimised for very soft materials where specialised geometries perform better. Practical advice for safe and efficient use When using the MetavCUT Twist Drill, ensure secure clamping and appropriate coolant or cutting fluid to dissipate heat and extend tool life. Start with a light feed to establish the hole, especially in harder materials, and avoid excessive spindle speeds that can overheat the tip. The 135° point reduces entry forces and improves centring for harder alloys, while the short execution minimises deflection—both contributing to cleaner, more accurate holes. For portable handheld drilling machines, consider the shorter projection to reduce user fatigue and increase control. The MetavCUT short Twist Drill (Type N) is recommended for professionals seeking stable, precise metal drilling; for expert technical advice or to confirm suitability for specific tasks contact METAV Werkzeuge — Email: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 47062-FDA Diameter: 6.2 mm Overall length: 101 mm Spiral length: 63 mm Tip angle: 135° Type: Type N Execution: short Material: HSS‑E Colour: 5% cobalt‑alloyed Shank design: fully ground Series: Standard Line Standard: DIN 338 For drilling machine: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill (Type N) mainly used for? The MetavCUT Twist Drill (Type N) is primarily applied for machining high‑strength materials and larger bore diameters. Its short form suits precise work and makes the drill easier to re‑grind while maintaining resistance to higher loads in metalworking operations. Which three drill types exist? There are three common drill types: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill (Type N) belongs to the metal drill category, optimised for use in metalworking environments. Why are Twist Drills pointed? The point geometry reduces the cross‑cut at the tip of a Twist Drill, which lowers friction and thus requires smaller feed forces. By sharpening the tip, the drill centres more reliably in the workpiece and cuts with less resistance, improving entry behaviour and hole quality. Can you use a Twist Drill to drill wood? A metal drill such as the MetavCUT Twist Drill (Type N) can be used in wood, but guidance and centring are generally poorer and the finish may be less clean compared with purpose‑made wood bits. Metal drills are easier to re‑grind and show less self‑feed, which can be an advantage in some hobby or repair scenarios. For which drilling depths is the Twist Drill most commonly used? A through hole in a solid piece is typically executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. The MetavCUT Twist Drill (Type N) is therefore appropriate for many standard metal drilling tasks. What is better, HSS or HSSE? The common assumption that HSSE steels are always superior to standard HSS is not universally correct. Choose between HSS and HSSE based on actual working conditions and whether the higher purchase cost of HSSE is justified by the specific performance benefits required.
6.2mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Der geschliffene Karosseriebohrer kombiniert Präzision und Alltagstauglichkeit: Die HSS‑G‑Geometrie ermöglicht bis zu 40 % schnelleres Bohren bei deutlich geringerer Anpresskraft, die doppelseitige Ausführung verlängert die Nutzungsdauer durch Umkehrbarkeit, und der 135° Spitzenwinkel sorgt für saubere Ansätze in härteren Werkstoffen. Nutzen Sie diese Kombination aus Effizienz, Stabilität und hoher Rundlaufgenauigkeit und beziehen Sie den Bohrer direkt über Metav oder klären Sie Details telefonisch oder per E‑Mail. Karosseriebohrer »58062-FDA« von MetavCUT (HSS‑G, 6,2 mm) Der Karosseriebohrer ist ein doppelseitig ausgeführter HSS‑G‑Bohrer, konzipiert für präzise Metallbohrungen in Werkstatt und Karosseriebau Karosseriebohrer »58062-FDA« von MetavCUT Geschliffenes HSS‑G für präzise Metallbohrungen Doppelendbohrer: beidseitig einsetzbar 6,2 mm Durchmesser, Spirallänge 16 mm 135° Spitzenwinkel für härtere Werkstoffe Effiziente Leichtarbeit dank geschliffener HSS‑Geometrie Die geschliffene HSS‑G‑Geometrie reduziert die Anbohrkräfte deutlich und ermöglicht ein bis zu 40 % schnelleres Bohren gegenüber herkömmlichen HSS‑Bohrern. Für Anwender bedeutet das weniger Ermüdung bei wiederkehrenden Bohrvorgängen und eine höhere Produktivität in der Werkstatt. Außerdem führt der CNC‑Schliff zu sehr scharfen Schneiden und hoher Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stählen, Gusswerkstoffen sowie Hartkunststoffen fördert. Doppelseitige Bauform für geringere Stillstandszeiten Die doppelseitige Ausführung macht den Bohrer besonders wirtschaftlich: Ist eine Spitze stumpf, kann der Bohrer einfach gewendet werden, so dass ein zweites Schneidenpaar sofort verfügbar ist. Die kompakte, stabile Bauform eignet sich speziell für Niet‑ und Dünnblecharbeiten in der Karosseriebranche und reduziert den Bedarf an Ersatzbohrern. Aufgrund der geschliffenen Fertigung sollte bei stationärer Nutzung eine angemessene Kühlung eingesetzt werden, um Bruchrisiken zu minimieren. Praxisgerechte Einsatzempfehlungen und Zielgruppe Mit 6,2 mm Durchmesser gehört der Bohrer zum Standard‑Bereich und ist ideal für Werkstätten, Karosseriebau und montageorientierte Anwender sowie für viele Heimwerkerprojekte. Für besonders präzise Anwendungen empfiehlt sich Vorzentrieren mit einem Zentrierbohrer, um Wandern beim Anbohren zu vermeiden. Die Kombination aus 135° Spitzenwinkel und geschliffener Schaftausführung sorgt für saubere Ansätze, besonders beim Bohren in härtere Materialien; bei zähen Werkstoffen Kühlung und moderater Vorschub verwenden. Empfehlung: Setzen Sie auf die MetavCUT Standard Line für langlebige, präzise Blecharbeiten und ordern Sie den Karosseriebohrer direkt über Metav per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 58062-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Standard Line Verpackungseinheit: 10 Anwendung: Bohrer für Metall Ausführung: doppelseitig Fakten Durchmesser: 6,2 mm Gesamtlänge: 66 mm Spirallänge: 16 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Hinweis: G = geschliffen – scharfe Kanten, hohe Rundlaufgenauigkeit FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Karosseriebohrer Standard Line (SKU 58062‑FDA) eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff und liefert in diesen Werkstoffen saubere Bohrbilder. Kann der Bohrer mit einem Akku‑Bohrer verwendet werden? Ja, der Karosseriebohrer ist für den Einsatz mit handgeführten Bohrmaschinen geeignet; bei 6,2 mm Durchmesser empfiehlt sich jedoch vorheriges Zentrieren für sehr präzise Passungen, um Wandern beim Anbohren zu vermeiden. Was bedeutet doppelseitig konkret in der Praxis? Doppelseitig heißt, dass der Bohrer an beiden Enden eine Schneide besitzt; dies erlaubt einfaches Wenden im Schadensfall und reduziert Stillstandszeiten, was besonders bei Niet‑ und Dünnblecharbeiten vorteilhaft ist. Wie lässt sich die Bruchgefahr bei geschliffenen HSS‑Bohrern minimieren? Um Bruchrisiken zu reduzieren, sollte der geschliffene HSS‑G‑Bohrer mit moderatem Vorschub, geeigneter Drehzahl und, bei zähen Werkstoffen, mit Kühlung betrieben werden; stationäre Befestigung oder stabile Führung erhöht die Lebensdauer deutlich.
6.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G Drill, 6.2 mm, 135° Point, Bright Finished, Fully Ground, DIN 338 — MetavCUT The Twist Drill (Type N) is a short HSS‑G drill designed for precise metalworking tasks on drilling machines and hand drills, optimised for hard materials and stable, accurate hole creation. Short design for higher stability 6.2 mm diameter for precise holes 135° point angle for hard materials Fully ground HSS‑G for sharp, accurate cuts Conforms to DIN 338 for industrial compatibility High performance for demanding metal drilling Built to deliver measurable productivity, this Twist Drill in HSS‑G quality combines a short overall length with a fully ground geometry to reduce vibration and improve centring. The 135° Point Angle eases penetration into harder metals such as stainless steel, while the CNC grinding of the flutes yields very sharp cutting edges and excellent runout accuracy. As a result, users experience up to 40% faster drilling and require 50% less feed force compared with conventional HSS variants, making this tool a rational choice where efficiency and repeatability matter. Short geometry that increases stability and precision A shorter projection from the chuck significantly reduces lever forces and deflection during drilling. The short design is therefore particularly suitable for operations where tight tolerances and straight, burr‑reduced holes are required. Because the flutes and cutting lips are produced by grinding rather than rolling, the drill achieves a cleaner hole surface and better dimensional consistency, especially when used with appropriate coolant and stationary or well‑supported setups. Material and cutting geometry explained for every user The HSS‑G (ground high speed steel) construction provides a balance of hardness and toughness for machining a wide range of metals. The designation Type N denotes the classic normal helix geometry tailored for metalworking; it is not optimised for soft timbers. Compliance with DIN 338 ensures standardised dimensions and shank form for easy mounting in chucks and toolholders. For less experienced users: a larger point angle reduces the tendency to wander on tough surfaces and shortens the time to break through the material. Where this drill delivers the most value This short Twist Drill is aimed at professional workshops and maintenance teams that work with alloyed and unalloyed steels, cast materials, non‑ferrous metals and hard plastics. It excels in jobs on bench drills and machine tools where stiffness is available and precise hole geometry is required. If the work involves deep, flexible setups or timber, consider dedicated long‑form or wood drills instead to match the application. MetavCUT recommends this Type N short HSS‑G Twist Drill for precision metalwork — for technical advice or to check suitability for a specific task, contact METAV Werkzeuge: info@metav-werkzeuge.com • Phone +49 2822 7131930 • WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill (Short) Brand: MetavCUT SKU: 45062-FDA Diameter: 6.2 mm Point Angle: 135° Type: Type N Material: HSS‑G (ground high speed steel) Finish/Colour: Bright Finished Shank Execution: Fully Ground Overall Length: 101 mm Spiral Length: 63 mm Application: Drills for Metal / Drilling Machine / Hand Drill use Norm: DIN 338 Execution: Short Model Series: Standard Line Shaft Treatment: Geschliffen (ground) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Type N short drill? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is well suited to alloyed and unalloyed steels, cast materials, non‑ferrous metals and hard plastics, offering reliable centring and clean hole walls when used on drilling machines or supported hand drills. Why choose a short Twist Drill like the MetavCUT Type N for precision work? A short Twist Drill reduces overhang and bending, improving stability and rotational accuracy; the ground geometry of the MetavCUT Type N gives sharp cutting edges that help achieve precise diameters and reduce burr formation. For what is a Twist Drill mainly used? A Twist Drill is primarily applied in the machining of high‑strength materials and for larger hole diameters; its ground form is easy to sharpen and withstands greater loads, making it suitable for difficult metalworking tasks. Which three drill types exist? There are three main drill categories: Metal drills, Wood drills, Stone/Concrete drills. Why are Twist Drills points de‑pointed (split)? Splitting the point reduces the cross‑edge at the tip, lowering friction and therefore the required feed force; it also improves centring of the tip in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill can be used in wood, but guidance is poorer and hole finish is less clean; metal drills are easier to resharpen and have a lower self‑feed tendency compared with dedicated wood drills. At which drilling depths is the Twist Drill most commonly used? Twist Drills are typically used for through‑hole drilling; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill remains the most commonly employed tool. Is HSS or HSSE better? The general assumption that HSSE is categorically superior to HSS is not universally correct; when choosing, evaluate whether the working conditions justify the higher cost of HSSE for your specific application.
6.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, Ø 6.3 mm, 118° point angle, short HSS, black, DIN 338 — MetavCUT The Twist Drill Type N is a short HSS metal-drilling bit designed for use in hand and drilling machines, offering precise, stable performance for metalworking tasks. Short HSS design for increased stability Conforms to DIN 338 for short twist drills 118° point angle for reliable centring on common metals Suitable for alloyed and unalloyed steel and non-ferrous metals Black finish reduces glare and aids chip evacuation Precision and durability for metalworking professionals The short HSS construction of this Twist Drill provides enhanced stability and reduced deflection during machining, making it ideal for accurate holemaking. Manufactured to DIN 338 specifications, the reduced projection length minimises chatter and improves concentricity when drilling in steel and cast iron. This results in consistently round holes and longer tool life compared with longer, more flexible bits. Versatile tip geometry that aids centring and feed Equipped with a 118° point angle, this Type N bit balances entry behaviour and cutting forces for general-purpose metal drilling. The geometry supports easier centring on slightly curved or irregular surfaces and is effective across a range of common metals. For users seeking a classic “Normal Spiral” performance, this bit provides a dependable compromise between fast penetration and controlled cutting action. Practical advantages for workshop and maintenance tasks This short Twist Drill excels in workshop and maintenance environments where accessibility and rigidity matter. The compact overall length reduces the exposed shank, lowering the risk of bend or breakage under side loads. For repetitive repair or assembly work on machinery and metal components, the improved stiffness translates into fewer broken bits and a more predictable drilling process. Material suitability and manufacturing benefits explained Made from High Speed Steel (HSS), the bit is suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. HSS offers a favourable combination of hardness and toughness; roll-formed HSS variants reduce the risk of breakage for small-diameter drills and maintain edge integrity during standard metalworking operations. The Type N normal spiral is the classic choice for metal drilling and can be resharpened when necessary to extend service life. Strong recommendation: Choose the MetavCUT Twist Drill Type N for reliable, precise metal drilling; for personalised advice or technical data METAV Werkzeuge provides expert support — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 40063-FDA Diameter: 6.3 mm Spiral Length: 63 mm Overall Length: 101 mm Point Angle: 118° For Drill: Drilling Machine / Hand Drill Type: Type N Material: HSS (High Speed Steel) Execution: short Colour: black Application: Drills for metal Standard: DIN 338 Manufacturer: MetavCUT Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N be used on? The MetavCUT Twist Drill Type N, made of HSS, is intended primarily for metalworking and is suitable for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and various Plastics; this composition provides a balance between hardness and toughness for common workshop tasks. What is a Twist Drill used for? A Twist Drill, such as the MetavCUT Twist Drill Type N, is mainly applied to the machining of high‑strength materials and larger drill diameters; its form allows straightforward resharpening and it withstands higher loads during drilling. Which 3 drill types are there? The three main drill categories are Metal Drills, Wood Drills and Masonry/Concrete Drills.
6.3mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Type N) — 6.3 mm, 135° Tip, Short, 5% Cobalt‑Alloyed, HSS‑E, DIN 338 The Twist Drill Type N is a short HSS‑E drill designed for precise metal drilling with hand and drilling machines, offering high stability and wear resistance in demanding machining tasks. Short design for improved stability and precision 5% Cobalt‑alloyed HSS‑E for increased heat resistance 135° Tip angle for harder materials and stainless steel Fully ground shank for excellent runout accuracy Conforms to DIN 338 for standardised short twist drills Exceptional Stability and Accurate Hole Making for Metalworking Short Spiral Geometry delivers a measurable benefit in everyday machining: the reduced overhang increases Stability and cuts down on bit deflection, so holes come out truer to size. This Short Twist Drill with a 63 mm Spiral Length and 101 mm Overall Length is particularly suited to operations where rigidity matters, such as drilling in steel or when using a Hand Drilling Machine. The 135° Tip shortens initial entry time in harder materials and helps maintain centring under load. Enhanced Material Properties for Longer Life under Heat and Load Manufactured from HSS‑E with 5% Cobalt, this Twist Drill offers greater red hardness and wear resistance compared with conventional HSS. The cobalt‑alloyed composition means the tool tolerates higher cutting temperatures and preserves cutting edges longer when machining alloyed and unalloyed steel, cast iron and non‑ferrous metals. HSS‑E (High Speed Steel with Cobalt) describes a faster heat‑resistant steel grade that balances toughness with hardness, reducing the need for frequent tool changes. Precision Grinding and Standard Compliance for Reliable Results The fully ground flute geometry produces very sharp cutting edges and high concentricity, yielding clean, accurate bores in metal. As defined by DIN 338, this Short Twist Drill is produced to standardised dimensions and tolerances for short drills with cylindrical shanks. Ground tools typically give better hole quality than roll‑formed alternatives; they are easier to resharpen but require proper cooling and appropriate speeds to avoid premature breakage. Optimised for Metal Applications and Practical Use Recommendations Designed as a classic Type N normal‑spiral metal drill, this tool is recommended for a range of metalworking tasks on both stationary and portable drilling equipment. The shorter cutting length reduces the risk of bending and is therefore ideal for precision holes and tougher materials. For best results, use suitable cutting speeds, adequate lubrication or coolant when drilling stainless or hardened steels, and secure the workpiece to minimise vibration. The construction allows for easier regrinding when required, extending service life. Strong recommendation: Choose the MetavCUT HSS‑E short Twist Drill for precise, high‑duty metal drilling — for personalised technical advice and application support contact METAV Werkzeuge; eMail: info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47063-FDA Type: Type N Diameter: 6.3 mm Overall length: 101 mm Spiral length: 63 mm Point angle: 135° Material: HSS‑E Cobalt content: 5% cobalt‑alloyed Execution: Short Shank finish: Fully ground Conforms to: DIN 338 Application: Drills for metal Suitable for: Drilling Machine (Hand Drilling Machine) Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger drill diameters; its short design and HSS‑E composition make it easier to resharpen and capable of withstanding higher loads during metalworking. Which three drill types are commonly distinguished? In general practice the main categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for steel and similar materials. Why are Twist Drills sharpened at the point? The point sharpening reduces the cross‑cut at the tip of the Twist Drill, lowering friction and therefore the required feed forces; additionally, a properly sharpened tip improves centring in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically inferior compared with dedicated wood drills; metal drills are easier to resharpen and exhibit less self‑feeding in soft materials. For which drilling depths is the Twist Drill most commonly used? A through hole in solid material is often executed with a Twist Drill; for diameters up to about 20 mm and drilling depths up to approximately 100 mm the Twist Drill is the most frequently used tool.
6.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, Ø 6.3 mm, 135° point, Bright finished, Fully ground, DIN 338, HSS‑G by MetavCUT The Twist Drill Type N short is a precision metal‑drilling bit with a 6.3 mm diameter and a 135° point angle, designed for stable, high‑accuracy work in hand drills and drilling machines. Short Type N Twist Drill for high stability Ø 6.3 mm HSS‑G fully ground cutting geometry 135° point angle for hard metals like stainless steel Fully ground shank ensures high concentricity Conforms to DIN 338 for metal drilling Reliable stability and precision for demanding metal jobs The short design of this Twist Drill delivers increased Stability and reduced deflection during drilling, which is particularly valuable when working with hard or thick metals. Because the Out‑of‑chuck length is shorter than standard bits, vibration is minimised and the tool gives a more concentric hole. This construction makes the bit especially suitable for precise setups on a drill press or for accurate handheld operations where hole quality matters. The fully ground geometry ensures sharp cutting edges and consistent hole diameters. Faster penetration and lower feed forces in hard materials A 135° Point Angle reduces the tendency to wander and shortens the initial penetration phase on tough substrates. Combined with the HSS‑G (ground high‑speed steel) material, the bit requires noticeably less feed force, improving operator comfort and control. These features support efficient machining in alloyed and unalloyed steel, cast steel, grey iron, sintered iron and many non‑ferrous metals, enabling cleaner holes and longer tool engagement before loss of edge. Suited applications and who benefits most This Type N short Twist Drill is designed for professional metalworkers, toolroom staff and maintenance technicians who need reproducible, high‑quality holes in metals. It works well in both stationary drilling machines and robust hand drills for repair, assembly and fabrication tasks. The drill is optimised for metalworking scenarios rather than soft timber or masonry, offering a reliable choice where precision and repeatability are priorities. Material, manufacturing and care for longer tool life Being HSS‑G means the flute geometry and cutting edges are produced by CNC grinding rather than rolling, giving sharper edges and superior roundness, though with slightly higher brittleness. For best results use cutting fluid or coolant when machining steels, and avoid heavy interrupted cuts without support. The fully ground shank improves runout performance in chucks and collets and allows for easier regrinding when the geometry permits; regrinding should follow the original geometry to maintain the 135° point behavior and drilling quality. Strong recommendation: choose the MetavCUT Twist Drill Type N short for precision metal drilling and contact METAV Werkzeuge for tailored advice and technical support — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT Model Series: Standard Line Diameter: 6.3 mm Spiral Length: 63 mm Overall Length: 101 mm Point Angle: 135° Type: Type N Execution: short Colour/Finish: bright finished Shank Execution: fully ground Material: HSS‑G Standard: DIN 338 Suitable for: Drilling Machine, Hand Drill Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill Type N short? The MetavCUT Twist Drill Type N short is primarily used for machining metal; it excels in drilling alloyed and unalloyed steel, cast steel, gusseisen, sintered iron and many non‑ferrous metals. Its short construction and ground geometry make it particularly effective for high‑precision metal holes and demanding industrial tasks. Which three drill types exist? Commonly distinguished drill types are Metal drills, Wood drills, and Masonry/Stone drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for machining a wide range of metallic materials.
6.4mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 6.4 mm, 118°, black, DIN 338, MetavCUT The Twist Drill Type N short by MetavCUT is a compact metalworking drill for precise holes in steel and non-ferrous materials, designed for use with a hand drill and compliant with DIN 338. 6.4 mm diameter for accurate metal holes Short design per DIN 338 for high stability HSS material for elasticity and wear resistance 118° point angle for reliable centering Stability and precision for demanding metalworking A short spiral drill made to DIN 338 reduces overhang and vibration, so even thin-walled components can be drilled with greater dimensional accuracy. The reduced exposed length improves rigidity and lowers the risk of deflection, which means cleaner holes and less rework for metalworking professionals. This compact design is particularly advantageous when working from fixed jigs or on small workpieces where stability is essential. High-Speed Steel construction for standard machining tasks Manufactured from HSS (High Speed Steel), this Type N short drill combines toughness with a degree of flexibility that reduces fracture risk during common metal drilling jobs. For standard operations in alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics, the material choice supports longer tool life under frequent use. The construction method improves resistance to chipping when drilling diameters under 6 mm and contributes to consistent drilling performance. Tip geometry and application suitability explained The 118° point angle favours reliable centering and controlled penetration in softer to medium-hard metals, making it well suited for general workshop use. As a Type N twist drill, it is optimised for metalworking rather than soft timber; the point geometry and flute design balance chip evacuation with cutting stability. Correct feed and moderate speeds prolong service life and yield round, burr-minimised holes for subsequent finishing operations. Who benefits from this short Type N twist drill Workshops, maintenance technicians and precision hobbyists seeking a robust everyday metal drill will appreciate the combination of 6.4 mm diameter, short overall length and HSS material. The tool is intended for use in hand-held drilling machines and small bench machines where operator control and low runout are priorities. Its design supports repeatable results for production runs of small to medium series or for single, critical repair tasks. Choose the MetavCUT Twist Drill Type N short for dependable metal drilling performance — for technical advice or to confirm suitability for your application contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 40064-FDA Diameter: 6.4 mm Spiral length: 63 mm Overall length: 101 mm Point angle: 118° Type: Type N Execution: short For use with: Hand Drill Colour: black Material: HSS Application: Drills for metal Standard: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N short best used for? The MetavCUT Twist Drill Type N short is primarily used for drilling metal; it excels in producing precise holes in alloyed and unalloyed steels, cast iron and non-ferrous metals when used in hand-held or small stationary drilling machines. Can the Twist Drill Type N short be used in wood? The MetavCUT Twist Drill Type N short can be used in wood, but as a metal-optimised drill it provides less guidance and a rougher finish than dedicated wood drills; it is easier to resharpen yet offers reduced self-feeding compared with timber-specific bits. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high-strength materials and larger drill diameters; their form makes them straightforward to resharpen and able to withstand higher loads. Which three drill types exist? The principal categories are Metal drill, Wood drill, and Stone/Concrete drill. Why are twist drills sharpened (pointed)? Pointing reduces the cross edge at the tip of the Twist Drill, lowering friction and required feed forces while improving the drill's centring in the workpiece. At what drilling depths are twist drills most commonly used? A solid through-hole is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most common tool. Is HSS or HSSE better? The general assumption that HSSE steels are always superior to HSS is not universally correct; selection should consider actual working conditions and whether the higher cost of HSSE is justified.
6.4mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill Type N — 6.4 mm, 135°, short, 5% cobalt-alloyed, HSS‑E, DIN 338 The Twist Drill Type N is a short HSS‑E metal drill designed for precise work in Hand Drilling Machines and stationary setups. Short design for increased rigidity and accuracy 135° point angle for hard materials like stainless steel HSS‑E with 5% cobalt for improved heat resistance Fully ground shank for high concentricity and clean holes Compliant with DIN 338 for short twist drills Greater Precision through a Short, Stable Design The short configuration of this Twist Drill minimises overhang and produces higher stability during drilling, which directly benefits precision and reduces the risk of wandering. The fully ground Shank delivers excellent concentricity, resulting in cleaner, rounder holes in Metal. For operators seeking reproducible results on benches or in jigs, the reduced tendency to deflect means less rework and better fit for threaded components. Suited to Hard Materials — Faster Penetration, Better Control With a 135° Point Angle and the Type N Normal Spiral geometry, this short HSS‑E tool is optimised for demanding tasks in Steel, Cast Iron and other hard materials. The geometry shortens initial touch‑in time and helps maintain the centre when starting a hole. Compliance with DIN 338 indicates manufacture to accepted dimensions and tolerances for short twist drills, supporting consistent performance across batches and easy integration in production workflows. Practical Guidance for Efficient Use Use the Twist Drill in a suitable Drilling Machine with adequate clamping and coolant to extend tool life. The 5% cobalt-alloyed composition increases heat resistance, allowing for higher cutting temperatures and improved wear stability; nevertheless, coolant or lubricant is advised for continuous or deep drilling. The shorter overall length favours operations where stiffness and tool control are critical, such as drilling into thicker plates or working with tight positional tolerances. Material and Handling Benefits from HSS‑E Chemistry The HSS‑E grade combined with 5% cobalt yields a balance of hardness and toughness that performs well under thermal load. The Standard Line production and the fully ground flute geometry create sharp cutting edges and excellent runout characteristics. Operators should note that ground drills offer superior hole quality but can be more brittle than rolled alternatives; therefore, controlled feed rates and proper cooling will help prevent chipping and extend service intervals. Strong recommendation: Choose the MetavCUT short Twist Drill for demanding metal applications and contact METAV Werkzeuge for expert advice and personalised support — eMail: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47064-FDA Type: Type N Diameter: 6.4 mm Point Angle: 135° Execution: short Overall Length: 101 mm Spiral Length: 63 mm Material: HSS‑E Colour / Surface: 5% cobalt-alloyed Shank: fully ground Application: Drills for metal For Drilling Machine: Drilling Machine Model Series: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N used for? The MetavCUT Twist Drill Type N is primarily used for drilling Metal and is suitable for demanding applications where a short, stiff tool is required. It is especially effective on harder materials thanks to the 135° point angle and HSS‑E chemistry, which together improve centring and heat resistance. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger bore diameters. Its form allows relatively simple resharpening and it withstands higher loads. This geometry is commonly used where durability and the ability to drill tough materials are required. Which 3 drill types are there? Common classifications are Metal drills, Wood drills, and Masonry/Concrete drills. Why are Twist Drills point‑ground? Point grinding reduces the cross‑cut at the tip of the Twist Drill, which lowers friction and consequently the required feed forces. In addition, a ground tip improves centring in the workpiece and leads to more accurate, controlled drilling.
6.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Bauweise und geschliffene HSS-G Qualität sorgen für präzise Bohrbilder und geringeren Kraftaufwand; nutzen Sie die Kombination aus Stabilität, schneller Schnittleistung und Normkonformer Ausführung für zuverlässige Metallbearbeitung. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer kurz, HSS-G, 6,4 mm von MetavCUT Der Spiralbohrer kurz bietet präzises Bohren in Metall bei hoher Stabilität und reduziertem Anpressdruck für stationäre und handgeführte Anwendungen. Kurze Ausführung für höhere Stabilität Geschliffen: hohe Rundlaufgenauigkeit 135° Spitzenwinkel für härtere Werkstoffe Geeignet für Handbohrmaschine und Werkbankbetrieb DIN 338 konform für kurze Spiralbohrer Hohe Stabilität für präzise Metallbohrungen Die kurze Ausführung reduziert die Auskraglänge und minimiert somit Vibrationen und Biegung beim Bohren in Stahl und Guss. Durch die verringerte Hebelwirkung bleibt die Bohrung maßhaltiger, was besonders bei präzisen Passungen und wiederholten Bohrungen Zeit spart. Die Bauweise empfiehlt sich für Einsatzfälle, in denen Stabilität und sauberer Werkstückrand entscheidend sind. Effiziente Schnittleistung bei geringerem Kraftaufwand Der HSS-G geschliffen garantiert sehr scharfe Schneiden und eine schnelle Spanabfuhr; dies ermöglicht bis zu 40 % schnellere Schnittgeschwindigkeit und benötigt bis zu 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Der 135° Spitzenwinkel reduziert das Auslaufen beim Anbohren härterer Werkstoffe und verkürzt die Anbohrzeit, was die Produktivität in Werkstatt und Produktion erhöht. Vielseitiger Einsatzbereich für Metallbearbeitung Mit einem Durchmesser von 6,4 mm fällt der Bohrer in den Standard-Bereich und ist ideal für Werkstatt, Montage und DIY-Projekte. Er eignet sich zum Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetallen und Hartkunststoffen. Die Kombination aus Typ N Normalspirale und kurzer Länge macht den Bohrer zu einer guten Wahl für schnelle, wiederholbare Bohrungen. Geschliffene Fertigung: Präzision trifft auf Handhabungshinweis Die geschliffene Schaft- und Nutgeometrie erzeugt sehr hohe Rundlaufgenauigkeit und saubere Bohrlöcher, ideal für hohe Ansprüche an Maßhaltigkeit. Geschliffene Bohrer können im Vergleich zur gewalzten Variante etwas spröder sein; deshalb empfiehlt sich bei intensiver Nutzung ausreichend Kühlung und, wenn möglich, stationärer Betrieb zur Reduktion von Bruchrisiken. Sichern Sie sich den Spiralbohrer von MetavCUT (SKU 45064-FDA) für präzise Metallbearbeitung bei Metav Werkzeuge — bei Fragen erreichen Sie uns per E‑Mail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 Produktmerkmale Bezeichnung: Spiralbohrer Hersteller: MetavCUT Serie: Standard Line Norm: DIN 338 SKU: 45064-FDA Ausführung: kurz Farbe: blank Schaftausführung: geschliffen Material: HSS-G Typ: Typ N Für Bohrmaschine: Handbohrmaschine Fakten Durchmesser: 6,4 mm Gesamtlänge: 101 mm Spirallänge: 63 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Stück Besonderheiten HSS-G (geschliffen) für scharfe Schneiden und hohe Präzision Schaft geschliffen (CNC-Schliff): hohe Rundlaufgenauigkeit Typ N (Normalspirale): klassisches Metall-Bohrverhalten DIN 338: Klassifizierung kurzer Spiralbohrer mit Zylinderschaft FAQ Für welche Materialien ist dieser Bohrer geeignet? Der Spiralbohrer von MetavCUT (SKU 45064-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Spiralbohrer kurz aus der Standard Line von MetavCUT ist für den Einsatz in Handbohrmaschinen geeignet, wobei die kurze Bauform für bessere Stabilität bei Handführung sorgt. Was bedeutet HSS-G und welchen Vorteil bietet es? HSS-G steht für Schnellarbeitsstahl geschliffen; der geschliffene Bohrer liefert schärfere Schneiden und hohe Rundlaufgenauigkeit, was sauberere Bohrlöcher und bessere Maßhaltigkeit ermöglicht. Warum ist der 135° Spitzenwinkel vorteilhaft? Der 135° Spitzenwinkel reduziert das Wandern beim Anbohren und verbessert das Eindringen in härtere Werkstoffe, wodurch die Anbohrzeit verkürzt und die Oberflächenqualität verbessert wird. Welche Verpackungseinheit ist verfügbar? Der Spiralbohrer von MetavCUT (SKU 45064-FDA) wird in einer Verpackungseinheit von 10 Stück geliefert.
6.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT überzeugt durch seine Kombination aus HSS-Material, kurzer Ausführung und der Einhaltung der DIN 338, was hohe Stabilität und zuverlässige Ergebnisse beim Metallbohren gewährleistet. Bestellen Sie den Bohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an, falls Sie spezielle Einsatzfälle besprechen möchten. Spiralbohrer 6,5 mm von MetavCUT (HSS, Typ N, kurz) Der Spiralbohrer von MetavCUT eignet sich für präzise Metallbohrungen auf Handbohrmaschinen und stationären Geräten und bietet Stabilität durch kurze Bauart. Kurze Ausführung für hohe Stabilität HSS-Material für Stahl und Gusseisen DIN 338 konform für kurze Spiralbohrer Spitzenwinkel 118° für einfache Anbohrung Zylinderschaft geeignet für Handbohrmaschine Stabilität und Präzision für alltägliche Metallarbeiten Die kurze Ausführung des Spiralbohrers reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren. Gerade bei einem Durchmesser von 6,5 mm sorgt die reduzierte Hebelwirkung für saubere, maßhaltige Bohrungen und weniger Vibrationen. Werkstätten und Montagebetriebe profitieren von der höheren Standzeit und der geringeren Bruchgefahr gegenüber längeren Ausführungen, insbesondere bei gängigen Bohranwendungen in Stahl, Aluminium und Guss. HSS und Normen geben Planungssicherheit Der Bohrer besteht aus HSS (High Speed Steel), was eine gute Elastizität und Verschleißfestigkeit kombiniert. Die Fertigung nach DIN 338 klassifiziert ihn als kurzen Spiralbohrer mit Zylinderschaft und garantiert eine standardisierte Abmessung und Handhabung. Der Spitzenwinkel von 118° erleichtert das Anbohren auf leicht gewölbten Flächen und ist eine bewährte Wahl für allgemeine Metallbearbeitung. Passende Einsatzbereiche und Maschinenkompatibilität Dieser Spiralbohrer ist ausgelegt für den Einsatz im Standard-Bereich (2,0 mm bis 13,0 mm) und eignet sich für Handbohrmaschinen sowie stationäre Bohrmaschinen. Typische Anwendungen sind das Bohren in Baustahl, Aluminium, Nichteisenmetallen und Kunststoffen. Die Zielgruppe umfasst Handwerk, industrielle Werkstätten und ambitionierte Heimwerker, die eine robuste Lösung für Routinebohrungen suchen. Anwendungstipps für lange Lebensdauer Für optimale Ergebnisse empfiehlt sich das Anpunkten mit einem Zentrierbohrer bei hoher Präzision und der Einsatz von Kühlmittel oder Schneidöl bei Stahl, um Wärmeentwicklung und Werkzeugverschleiß zu reduzieren. Moderate Drehzahlen und gleichmäßiger Vorschub verlängern die Lebensdauer. Vermeiden Sie sehr tiefe Bohrungen ohne Zwischenspülung, da die Späne zuverlässig abgeführt werden müssen. Für präzise Metallbearbeitung empfiehlt MetavCUT diesen HSS-Spiralbohrer als zuverlässige Alltagslösung — Für Bestellungen oder technische Fragen kontaktieren Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 40065-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Norm: DIN 338 Daten Durchmesser: 6,5 mm Gesamtlänge: 101 mm Spirallänge: 63 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS (High Speed Steel, Schnellarbeitsstahl) Typ: Typ N (Normalspirale) Farbe: schwarz Für: Handbohrmaschine Eignung: Bohrer für Metall FAQ Für welche Materialien ist der Spiralbohrer geeignet? Der Spiralbohrer von MetavCUT ist geeignet für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; bei harten Werkstoffen sind passende Schnittparameter und Kühlung zu beachten. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Spiralbohrer mit Zylinderschaft ist kompatibel mit Handbohrmaschinen und eignet sich besonders für den Standard-Bereich von 2 mm bis 13 mm. Welchen Spitzenwinkel hat der Bohrer und was bedeutet das praktisch? Der Spiralbohrer hat einen Spitzenwinkel von 118°, was das Anbohren erleichtert und gutes Zentrierverhalten auf glatten oder leicht gewölbten Oberflächen ermöglicht. Nach welcher Norm ist der Bohrer gefertigt? Der Bohrer entspricht der Norm DIN 338, die kurze Spiralbohrer mit Zylinderschaft definiert und damit einheitliche Abmessungen sowie Einsatzbereiche sicherstellt. Welche Artikelnummer hat dieses Produkt für die Bestellung? Die Artikelnummer lautet 40065-FDA; bei Rückfragen zur Eignung oder Lieferumfang hilft MetavCUT beziehungsweise Metav Werkzeuge gern weiter.
6.5mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 6.5 mm, 135° tip, short, 5% cobalt-alloyed, HSS‑E, DIN 338 The Twist Drill Type N is a short HSS‑E metalworking drill designed for stable, precise holes in hard materials when used with a Drilling Machine. Short construction for increased stability 6.5 mm diameter for standard metalwork 135° tip for clean penetration in hard steels 5% cobalt‑alloyed HSS‑E for enhanced wear resistance Fully ground shank for high concentricity Durable alloy and compact design for demanding metalwork The HSS‑E composition with 5% cobalt gives this short twist drill exceptional heat resistance and wear stability when machining tough alloys. Because the design is short, the tool exhibits reduced overhang and less flexing, which directly improves hole accuracy and tool life under heavy cutting loads. This makes the drill particularly suitable for precision tasks such as locating holes in jigs and producing repeatable diameters in alloyed and unalloyed steel. Geometry and finish that improve hole quality and centring A fully ground flute geometry yields very sharp cutting edges and excellent concentricity; the typical result is cleaner chips and reduced burr formation. The 135° tip angle reduces thrust and improves entry in hard materials such as stainless steel, shortening the initial contact phase and helping to avoid wandering. As a Type N normal‑spiral twist drill, it balances chip evacuation and cutting stability for general metalworking. Recommended applications and suitable materials This short Twist Drill is engineered for use in metalworking: it performs well on alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics. The compact length is an asset when working with hand or bench drilling machines where rigidity is crucial. Note that Type N geometry is not optimised for very soft woods; for woodworking, specialist drills provide better guidance and surface finish. Handling, cooling and reconditioning advice for longer life To maintain performance, use appropriate cutting speeds and a cutting fluid when machining steels; cooling reduces tool wear and the risk of tempering the cutting edge. Because the drill is manufactured ground, it can be resharpened by a skilled operator to restore the cutting lip and prolong service life. Observing correct feed and speed settings for the material ensures reliable hole quality and minimises breakage risk. We recommend MetavCUT’s Twist Drill Type N for precise metalworking — for personal technical advice or to confirm suitability for your application, contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 47065-FDA Diameter: 6.5 mm Tip angle: 135° Spiral length: 63 mm Overall length: 101 mm Execution: short Type: Type N Material: HSS‑E Colour: 5% cobalt‑alloyed Shank finish: fully ground Model series: Standard Line Norm: DIN 338 For machine: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N best used for? The MetavCUT Twist Drill Type N is primarily used for metalworking; it excels when drilling alloyed and unalloyed steels, cast iron and other hard materials, offering good general performance on rotating drilling machines. Can the MetavCUT Twist Drill be used in a hand drilling machine? Yes, the short design of the MetavCUT Twist Drill makes it especially stable in hand and bench Drilling Machines, reducing the tendency to bend and improving hole accuracy when correct speeds and cooling are applied. What are Twist Drills used for? Twist Drills are mainly applied when machining high‑strength materials and larger diameters. Their form allows relatively simple resharpening and they withstand higher loads, making them suitable for robust metalworking tasks. Which three drill types exist? The three primary drill categories are metal drills, wood drills and stone/concrete drills.
Reliable performance for daily drilling
The Standard line is a versatile series of HSS (high-speed steel) twist drills, also described as standard twist drills or precision HSS twist drills, engineered for everyday industrial and workshop use. Positioned between economy options and specialist pro-grade tools, the standard line delivers consistent, repeatable results for regular drilling tasks without the need for high-cost alloys.
How the standard line performs in practice
Designed as precision ground (HSS‑G) twist drills, the standard line combines a refined manufacture process with a classic geometry. A typical 118° tip and a cleanly formed point give good penetration and reliable centring, while extremely smooth flute surfaces support efficient chip evacuation. The result is stable running, improved hole quality and extended tool life under normal production and maintenance conditions.
Key advantages that matter on the shop floor
- Reduced rework thanks to high concentricity and precise hole quality
- Lower tool consumption through enhanced wear resistance from precision grinding
- Faster cycle times via efficient chip removal from smooth flutes
- Broad applicability across common materials: steel, cast iron, sintered metal, plastics and non‑ferrous metals
- Ideal balance of performance and cost for workshops, maintenance teams and assembly lines
Technical data
- Material: HSS (high-speed steel)
- Manufacture: precision ground (HSS-G)
- Tip angle: 118° (typical)
- Features: smooth flutes, optimised point geometry, excellent concentricity
- Applications: unalloyed steel, low-alloy steel, cast iron, sintered metal, plastics, non‑ferrous metals
Why Metav is the smart sourcing choice
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of technical know-how with a broad assortment, making high-quality measuring and workshop tools accessible to small and large operations alike. With over 48,000 customers, more than 250,000 products and a logistics hub in Emmerich, Metav offers dependable supply and a curated quality filter for the european market — the sensible route to equip your shop with standard line twist drills and complementary tooling.
FAQ
What materials are standard line twist drills suitable for?
The standard line twist drills are suitable for unalloyed and low‑alloy steel, cast iron, sintered metal, plastics and non‑ferrous metals, matching typical workshop and light industrial requirements.
How does the precision ground (HSS‑G) design benefit drilling results?
Precision ground manufacture increases concentricity and improves cutting edge finish, which leads to better hole quality, reduced vibration and longer tool life compared with roll‑formed entry‑level drills.
Are standard line drills a substitute for pro‑grade specialist drills?
Standard line drills are intended as the reliable everyday option; they deliver consistent performance for regular production and maintenance but are not a replacement when extreme loads or specialised alloys demand pro‑grade materials.
Which synonyms should procurement teams use when searching for these tools?
Search terms such as “standard twist drills”, “HSS standard drills” or “precision HSS twist drills” will reliably lead to the standard line and comparable products.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com