Vollbohrer für effizientes Tiefbohren in Massivwerkstoff
Vollbohrer ermöglichen das direkte Einbringen von Bohrungen in Massivwerkstoff und sparen durch den Einsatz auf Drehmaschinen und Bearbeitungszentren wertvolle Prozesszeit, indem sie große Materialvolumina in einem Arbeitsgang abtragen; dabei bietet die Variante mit Innenkühlung die notwendige Kühlmittelzufuhr, um hohe Reibungswärme abzuführen und Späne sicher aus dem Bohrloch zu spülen, während Ausführungen ohne Innenkühlung nur für sehr kurze Bohrtiefen und leicht zerspanbare Materialien geeignet sind; als Synonyme gelten Massivbohrer und Vollkernbohrer, die in der Zerspanung vor allem durch ihre Standzeit und Prozesssicherheit überzeugen.
18mm Solid Drill Holder 40.5mm Cutting Length, 56mm Shank Length, 112mm Overall - Teknik Makina
Product data conflict for SKU U038TM: the item is listed as a solid drill but also specifies indexable inserts (XCMT 09T304), so technical details cannot be determined reliably — please verify the source data to ensure accuracy, as discrepancies like this can lead to confusion in product identification, miscommunication during procurement, or incorrect usage in applications, potentially causing operational inefficiencies or safety risks; resolving this issue promptly by cross-referencing with the original manufacturer’s specifications or consulting technical documentation is essential to maintain data integrity and ensure that the correct product details are communicated to all relevant stakeholders.
19,5mm Indexable Drill for Taegutec SOMT 0703 inserts - Teknik Makina
Product Technical Details: Item: Indexable Drill Brand: Teknik Makina Order Number: U313TM usable with SOMT 0703 Indexable Inserts of Taegutec Diameter: 19,5mm Total length: 135mm Diameter Connection: 25mm Weight: 0.33kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
19.5mm Solid Drill 57mm Cutting Length 134mm Overall Length, 25mm Shank - Teknik Makina
Take advantage of a robust indexable design and precise dimensions to reduce tool change time and maintain consistent hole quality; the combination of a Ø 19.5 mm cutting diameter and a 25 mm shank ensures straightforward holder compatibility and stable clamping — order the tool directly via Metav Werkzeuge or consult our specialists for integration advice Indexable Insert Drill U149TM — Ø 19.5 mm, 25 mm shank | Teknik Makina An indexable insert drill designed for short- to medium-reach drilling in metalworking applications, combining a compact total length with a replaceable-insert concept for efficient throughput Ø 19.5 mm cutting diameter Fits Korloy WCM-0302 indexable inserts 25 mm shank, total length 134 mm Reliable holemaking through an indexable design The U149TM is built as an indexable insert drill that brings the advantage of fast insert changes and predictable chip control. With a 57 mm cutting length and a precisely defined Ø 19.5 mm diameter, the body enables consistent hole depth and form across batches, which reduces scrap rates and rework. The use of replaceable inserts delivers lower per‑hole tooling cost compared with single‑use solid drills; when an insert edge is spent, the cutting edge is exchanged quickly, restoring cutting performance with minimal downtime. This approach benefits production environments that require reproducible results under repeat cycles and contributes to a more economical tool lifecycle. Secure integration with standard holders for robust machining A 25 mm shank diameter and an effective 56 mm shank length provide a stable connection to common toolholders, improving runout stability and surface finish. Compatibility with Korloy WCM‑0302 inserts means the drill body can be stocked as a universal carrier while the cutting geometry is maintained through standard inserts — a practical inventory strategy for workshop managers. The moderate total length of 134 mm balances reach and rigidity, so the tool performs reliably in through‑hole and short blind‑hole operations without excessive vibration or tool deflection. Optimised dimensions that support efficient workflows The combination of 57 mm cutting length and a compact body reduces tool overhang and helps maintain concentricity during drilling cycles. At a weight of 0.34 kg, the component is easy to handle during set‑up and changeover while still offering sufficient mass for steady cutting. Because the design focuses on replaceable cutting elements, maintenance becomes a matter of swap and verify rather than full tool replacement, which simplifies toolroom logistics and shortens mean time to repair. The result is a measurable uplift in machine uptime and a smoother production flow. Practical choice for contract workshops and production lines Choosing an indexable solution such as this drill reduces tooling waste and supports repeatable quality — advantages that translate into improved throughput and stable cost per part. The body accepts established inserts, streamlines reconditioning procedures and aligns with existing cutting data from Korloy inserts, so technicians can apply proven parameter windows for feeds and speeds. For operations seeking dependable, adaptable drilling with limited stocking complexity, the tool provides a sensible middle ground between solid drills and larger modular systems. Select the Teknik Cutting Tools U149TM for dependable, easy‑to‑service drilling — contact Metav Werkzeuge in Emmerich for ordering or technical consultancy via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U149TM Manufacturer: Teknik Makina Diameter: 19.5 mm Total length: 134 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.34 kg Special features Compatible inserts: WCM-0302 Compatible insert manufacturer: Korloy Indexable insert drill design SKU: U149TM FAQ What insert type does the drill use? The drill accepts WCM-0302 indexable inserts; the carrier is prepared for this insert geometry to ensure correct seating and chip flow. Is the shank size standard for common holders? Yes — the 25 mm shank is compatible with standard 25 mm holders, providing secure clamping for stable drilling performance. What is the maximum usable cutting length? The tool provides a 57 mm cutting length, suitable for short to medium-depth holes while maintaining stiffness and accuracy. Can this body be used with inserts from other manufacturers? The U149TM is specified for Korloy WCM-0302 inserts; alternative suppliers with identical insert geometry may fit but verification of siting and clearance is recommended before production use. How does the indexable concept reduce operating costs? By replacing only the worn insert rather than the entire drill, the carrier extends service life and lowers per‑part tooling expenditure while shortening downtime for changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19.5mm Solid Drill, 57mm Cutting Length, 25mm Shank, 134mm Overall Length - Teknik Makina
Take advantage of precise holemaking with a Ø 19.5 mm diameter and a rigid 25 mm shank for stable clamping and consistent cycle times; order the tool directly via Metav Werkzeuge or ask the technical consultants for application advice. Indexable insert drill U819-1TM — Ø 19.5 mm, 25 mm shank (Teknik Makina) The Indexable insert drill U819-1TM is a robust drill body designed for medium-duty CNC holemaking where repeatable accuracy and rapid insert changes are required Indexable design for SPMG 0602 inserts 19.5 mm diameter for medium drilling 25 mm shank with 56 mm gauge length 57 mm cutting length for deep holes Reliable machining performance for productive cycles The U819-1TM is engineered to deliver stable machining and predictable tool life. With a Ø 19.5 mm diameter and a 57 mm cutting length, the tool body supports longer engagement without compromising roundness, reducing the need for frequent tool changes. The robust 25 mm shank ensures secure clamping in standard toolholders, which translates into less runout and improved surface finish. Where process stability and repeatability are priorities, this drill body reduces cycle-time variance and supports consistent hole tolerances. Compatibility that simplifies tool planning and inventory Designed for indexable operation with SPMG 0602 inserts, the drill body integrates smoothly into existing insert assortments. Compatibility with insert manufacturers Taegutec and YG-1 allows procurement teams to use established suppliers and preferred grades without adapting machining data drastically. The combination of a standard insert seat and common insert formats reduces stock complexity and shortens changeover times on the shop floor, enabling quicker responses to varying batch sizes. Built for workshop reliability and easy maintenance The modular concept concentrates wear on the replaceable cutting plates, so the tool body stays serviceable for many insert cycles. At a weight of 0.33 kg and an overall length of 134 mm, the component is light enough for convenient handling yet sufficiently rigid for stable drilling in medium-duty applications. The accessible clamping and insert pocket design minimise downtime for insert changes and regrinding, while the clear dimensional specification supports straightforward integration into tool lists and work instructions. Order Teknik Makina's U819-1TM through Metav Werkzeuge for dependable integration into production tooling; Metav Werkzeuge's technical team can advise on insert grades, holder selection and process parameters — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: U819-1TM Manufacturer: Teknik Makina Product: Indexable insert drill Facts Diameter: 19.5 mm Overall length: 134 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.33 kg ECLASS: 21180201 Special features Compatible inserts: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 Indexable design for reduced tooling cost FAQ Which insert type fits this drill body? The drill body accepts SPMG 0602 inserts; compatible grades from Taegutec and YG-1 are commonly used with the U819-1TM. What are the key dimensions for holder selection? Shank diameter is 25 mm with a shank/gauge length of 56 mm and an overall length of 134 mm, which should be matched to the selected holder. How deep can this tool drill effectively? The tool offers a 57 mm cutting length, suitable for medium-depth holes while maintaining stability when clamped correctly. Is the drill body suitable for rapid insert changes? Yes — the indexable design concentrates wear on the inserts (SPMG 0602), enabling quick replacement and minimising downtime for maintenance. What is the product code for ordering and reference? Order or reference the component as U819-1TM, Teknik Makina indexable insert drill. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Solid Carbide Boring Bar 57mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of a compact, indexable drilling solution that combines a Ø 19 mm cutting diameter, a 25 mm shank for secure clamping and compatibility with SPMT 0602 inserts to keep tooling costs low and uptime high; order directly via Metav Werkzeuge or consult their specialists for application support. U016TM indexable drill – Ø 19 mm, SPMT 0602 compatible (Teknik Makina) The U016TM indexable drill is an insert-based drilling tool for precision holemaking in industrial machining, designed to accept SPMT 0602 inserts for economical tool life management Ø 19 mm cutting diameter SPMT 0602 insert system 25 mm shank diameter 57 mm cutting length, 134 mm overall Precision and repeatability for CNC production The body is engineered to deliver consistent hole geometry and stable machining under repeated cycles. With a Ø 19 mm cutting diameter and an effective cutting length of 57 mm, the tool supports accurate depth control while the 25 mm shank ensures reliable clamping in standard toolholders. These measurable specifications translate into predictable cycle times and repeatable results across batches, while the indexable insert concept allows the cutting edge to be renewed quickly without changing the whole tool body. Lower tooling costs and reduced downtime Using replaceable cutters means the economics of drilling change in favour of productivity: worn edges are exchanged instead of discarding the entire tool, which reduces consumable spend and shopfloor interruptions. The SPMT 0602 insert format is widely available and, when combined with a robust drill body, supports sustained production runs with shorter maintenance windows. The design is therefore suited to operations that prioritise throughput and cost control in repetitive holemaking tasks. Secure clamping and compact geometry for flexible integration The tool’s overall length of 134 mm and a shank length of 56 mm are balanced against a tool weight of 0.35 kg, offering a compact footprint and manageable mass for high-speed spindles. Compatibility with Korloy inserts is specified for the cutter interface, enabling straightforward procurement of cutting edges. The construction supports straightforward mounting and stable rotation, and the combination of dimensions promotes compatibility with common fixture and chucking systems used in modern machining centres. Serviceability, application advice and supply reliability Maintenance is simplified by the insert system: indexable cutters are replaced and secured with standard clamping screws, reducing operator training and minimising process variance. As a supplier, Metav Werkzeuge brings a quality‑focused supply chain and decades of expertise to the selection and delivery of tooling solutions, backed by a broad range of accessories and alternative insert options. The result is a practical tool choice for workshops and production environments that require dependable availability and technical guidance. For tailored technical advice on the Teknik Makina U016TM indexable drill and to arrange supply via Metav Werkzeuge, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt product and application support Technical data Article number: U016TM Manufacturer: Teknik Makina Brand: Teknik Makina Core specifications Diameter: 19 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 134 mm Weight: 0.35 kg Features & compatibility Compatible inserts: SPMT 0602 Compatible insert manufacturer: Korloy SKU: U016TM Indexable insert drill body FAQ What insert type does the tool accept? The tool is designed for SPMT 0602 indexable inserts, allowing simple replacement of cutting edges. Which shank diameter is specified for secure clamping? A 25 mm shank diameter is specified for robust clamping and compatibility with common toolholders. What are the main dimensions of the drill? Key dimensions are a 19 mm cutting diameter, 57 mm cutting length and 134 mm overall length. Is the U016TM compatible with Korloy inserts? Yes, the drill body is compatible with inserts from Korloy, as specified for the cutter interface. How heavy is the tool and what does that mean for spindle load? The tool weight is 0.35 kg, which keeps spindle load modest and aids in maintaining balance during rotation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Solid Carbide Boring Bar 57mm Cutting Length, 56mm Shank Length - Teknik Makina
Combining a rigid 25 mm shank with a Ø 19 mm drill body and a 57 mm cutting length, this indexable solution offers stable, repeatable holemaking for CNC operations; order directly via Metav Werkzeuge or consult our application specialists for precise toolholder and insert pairing. Indexable Drill U312TM – Ø 19 mm, 57 mm cutting length (Teknik Makina) A compact, high-rigidity Indexable Drill U312TM engineered for CNC drilling with replaceable SOMT 0602 inserts Ø 19 mm diameter for standard hole sizes 57 mm effective cutting length 25 mm shank for secure clamping Compatible with Taegutec SOMT 0602 inserts Stable, measurable performance for CNC holemaking The design focuses on delivering consistent results in production environments where repeatability matters. The combination of a 25 mm shank and a balanced drill body reduces deflection under load, supporting accurate hole dimensions across runs. With an Ø 19 mm nominal diameter and a 57 mm cutting length, the tool provides a clear specification for fixture and holder selection, enabling predictable process parameters and easier integration into existing tool cycles. The indexable concept ensures that cutting geometry remains constant after each insert change, which aids process control and quality assurance. Fast service life management through indexable inserts Equipped for SOMT 0602 indexable inserts, this drill body minimises downtime by allowing quick index changes rather than complete tool replacement. The insert system supports efficient stock management and lower per-hole tooling costs when compared with solid-carbide alternatives, especially in batch production. Compatibility with Taegutec inserts ensures ready availability of turning and drilling grades, while the insert format supports straightforward orientation and clamping within the insert pocket. The result is a pragmatic balance between operational economy and machining performance. Practical rigour for shop-floor integration The overall length of 135 mm and a shank length of 56 mm permit secure mounting and sufficient overhang control in typical toolholders. Weighing 0.33 kg, the body is lightweight enough for rapid tool changes yet rigid enough to maintain stability during medium-depth drilling. Clear dimensional data—Ø 19 mm, 57 mm cutting length, 25 mm shank—simplifies the selection of collets, chucks or shrink-fit holders and reduces set-up time. For users seeking specification advice or confirmation of holder compatibility, Metav’s technical team provides pragmatic guidance rooted in decades of precision-supply experience. For procurement and technical pairing of Teknik Makina tools such as the U312TM, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholder selection, insert choice and delivery options Technical Data Article number: U312TM Designation: Indexable drill Manufacturer: Teknik Makina Core dimensions Diameter: 19 mm Overall length: 135 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.33 kg Features & compatibility Compatible inserts: SOMT 0602 Insert manufacturer: Taegutec Tool type: Indexable drill body FAQ Which inserts fit this drill? The U312TM is designed for SOMT 0602 indexable inserts; compatible grades from Taegutec are commonly used with this drill body. What are the key dimensions to check for toolholder compatibility? Check the 25 mm shank diameter, the 56 mm shank length and the Ø 19 mm cutting diameter to ensure the toolholder accepts the U312TM and provides sufficient clamping length. How deep can this drill cut effectively? The effective cutting capacity is defined by the 57 mm cutting length; the overall length is 135 mm, which informs clamping and overhang considerations. Is this drill suitable for high-volume production? The indexable design with SOMT 0602 inserts supports economical insert changes and predictable repeatability, making it well suited to batch and series production where insert replacement is preferred over whole-tool change. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Solid Carbide Deep Drill 57mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of precise, repeatable holemaking thanks to the combination of a 19 mm cutting diameter, a 57 mm effective cutting length and secure 25 mm shank clamping; order the drill body directly via Metav Werkzeuge or contact the consultants for specification support. Drill Body U148TM – Indexable-insert drill body, Ø 19 mm (Teknik Makina) The Drill Body U148TM is an indexable-insert drill body engineered for production drilling with Korloy inserts, providing a compact overall length and a robust interface for repeatable performance across machining runs. Ø 19 mm cutting diameter Compatible with Korloy WCM-0302 inserts 57 mm effective cutting length 25 mm shank for secure clamping High repeatability through defined cutting geometry The U148TM is designed to deliver consistent hole quality by combining a precisely manufactured body with a clear cutting length of 57 mm. The fixed effective cutting length ensures repeatable depth control across batches, which reduces the need for constant re-measurement and shortens setup time. Built for indexable-insert operation, the body keeps the insert position stable so that each tool change restores the original geometry quickly, improving throughput in medium-length drilling tasks. Stable clamping and machine compatibility A 25 mm shank provides a substantial clamping diameter that minimises vibration and improves tool life when mounted correctly. With an overall length of 134 mm and a shank length of 56 mm, the component balances reach and stiffness for production machines and toolholders that accept a 25 mm interface. The modest mass (approx. 0.338 kg) helps maintain spindle balance while keeping centrifugal forces and heat generation within predictable ranges during typical rotational speeds. Optimised for indexable-insert economics Compatibility with Korloy WCM-0302 inserts lets workshops benefit from replaceable cutting edges rather than full-tool replacement, lowering long-term tooling costs and simplifying inventory management. The U148TM supports quick insert changes and consistent seating, which shortens downtime during maintenance and keeps productivity high. For operations that standardise on Korloy indexing systems, the drill body integrates with existing insert stocks and clamping practices. Practical handling and maintenance guidance The indexable design means maintenance is limited to periodic insert replacement, seat inspection and torque checks of the clamping screws; no complex regrinding is required. Correct torque and clean seat surfaces ensure the indexable-insert drill body maintains its positional accuracy after every change. For technical clarifications, insert selection or compatible holder recommendations, Metav Werkzeuge can provide targeted information and product matching assistance. For Tek nik Cutting Tools’ Drill Body U148TM, contact Metav Werkzeuge for order placement or technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for detailed compatibility and application support Technical data Article number: U148TM Manufacturer: Teknik Makina Designation: Drill body (indexable insert) Compatible inserts: Korloy WCM-0302 Facts Diameter: 19 mm Effective cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 134 mm Weight: 0.338 kg eClass: 21180201 Special features For Korloy WCM-0302 indexable inserts Indexable-insert drill body for production drilling Robust 25 mm shank for secure clamping FAQ What inserts fit this drill body? The drill body U148TM (Teknik Makina, SKU U148TM) is compatible with Korloy WCM-0302 indexable inserts. What is the effective cutting length of the tool? The effective cutting length of the U148TM is 57 mm, which defines the repeatable depth for batch drilling operations. Which shank size is required for mounting? A 25 mm shank interface is required; the U148TM provides a 25 mm shank diameter for secure clamping in suitable toolholders. What is the overall length and how does that affect reach? The overall length is 134 mm; this balances reach and rigidity for common production setups while minimising deflection. How heavy is the tool and does that affect spindle balance? The tool weighs approximately 0.338 kg; its modest mass helps maintain spindle balance when installed according to manufacturer recommendations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Solid Drill 38mm Cutting Length 56mm Shank Length 115mm Total Length - Teknik Makina
Take advantage of a stable, insert-compatible drilling solution that combines reliable chip control with straightforward tool replacement; the result is a measurable improvement in drilling uptime and predictable tool management. Order the component directly via Metav Werkzeuge or consult our specialists for integration advice. Indexable drill U919TM – 19 mm diameter, 25 mm shank (Teknik Makina) A robust indexable drill U919TM engineered for precision boremaking in metalworking and CNC machining applications. 19 mm cutting diameter Compatible with SPMG 0602 inserts 25 mm shank, 56 mm shank length Cutting length 38 mm, overall length 115 mm Stable clamping for consistent bore quality The solid-body design of the holder provides a secure interface between spindle and cutting edge, reducing runout and improving hole tolerances. With a 25 mm shank and 56 mm shank length, the tool achieves reliable spindle engagement that translates into repeatable concentricity and surface finish. The modest mass (approximately 0.329 kg) helps to keep tool inertia low, facilitating faster acceleration on CNC machines without compromising stability. Flexible insert compatibility reduces downtime Designed to accept SPMG 0602 indexable inserts and compatible with insert ranges from Taegutec and YG-1, the tool holder allows quick reconditioning of the cutting edge instead of replacing entire drills. This modular approach reduces per-hole tooling cost and shortens maintenance intervals. The use of standardised inserts supports rapid stocking and cross-compatibility across workshops seeking efficient tool change strategies. Optimised geometry for industrial throughput A 38 mm cutting length and 115 mm overall length balance rigidity with access for deep bore requirements, making the holder suitable for many common drilling tasks on lathes and milling centres. The tool’s geometry is selected to enable effective chip evacuation from the cutting zone while maintaining axial stiffness; this reduces the risk of chatter and helps maintain cycle times under production conditions. The configuration supports predictable tool life when combined with correct feed and speed settings. Reliability supported by Metav’s supply chain Sourcing through Metav Werkzeuge ensures access to a comprehensive stock and traceable logistics from Emmerich. Metav’s role as a quality filter for the European market and its broad product range make procurement straightforward for workshops and distributors alike. Backing from an established partner adds assurance in delivery consistency and product traceability during extended production runs. Contact Metav Werkzeuge for detailed integration guidance on the Teknik Makina indexable drill U919TM and to confirm compatibility with existing toolholders — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: U919TM Manufacturer: Teknik Makina Name: Indexable drill U919TM Diameter: 19 mm Cutting length: 38 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 115 mm Weight: 0.329 kg Compatible insert type: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 Tool family: Indexable drill FAQ What insert size does the tool use? The indexable drill U919TM is designed for SPMG 0602 inserts; these enable straightforward edge changes and cost-effective tool upkeep. Which insert manufacturers are supported? The tool holder accepts inserts from Taegutec and YG-1, offering flexibility in sourcing replacement cutting edges. What clamping interface is provided on the shank? The U919TM features a 25 mm shank with a 56 mm shank length, suitable for standard 25 mm collet and holder systems that accept this diameter. How deep can the drill cut effectively? The drilling solution offers a 38 mm cutting length, which is intended for medium-depth bores while maintaining rigidity and chip control. Is the U919TM suitable for high-volume production? Yes; the indexable concept of the U919TM supports rapid insert changes and predictable maintenance cycles, making it a practical choice for repetitive production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Solid Drill 76mm Cutting Length 154mm Overall Length, 25mm Shank - Teknik Makina
Benefit from precise, productive holemaking with a 19 mm drilling diameter and a rigid 25 mm shank; the indexable design reduces downtime and stabilises cycle times. Order the U412TM through Metav Werkzeuge or consult the technical team for application-specific advice. Teknik Makina Indexable Drill Body U412TM — 19 mm, 25 mm shank The U412TM indexable drill body is engineered for economical, repeatable hole production using SOMT 0602 indexable inserts, suited to standard toolholders and production drilling applications. 19 mm drilling diameter 25 mm shank for stable clamping Compatible with SOMT 0602 inserts 76 mm cutting length, 154 mm overall length Stable, high-throughput drilling with reduced vibration The indexable drill body delivers a combination of rigidity and accessible servicing that supports steady production runs. Built with a 25 mm shank and an overall length of 154 mm, the tool is designed to reduce deflection at the cutting edge, which in turn improves hole tolerance and surface finish. For workshops that measure process efficiency, the solid construction and predictable runout characteristics translate into fewer rework cycles and more consistent component quality. Predictable running costs through an insert system Using SOMT 0602 indexable inserts allows fast, tool-free insert changes on the shop floor and straightforward inventory management. The insert system separates cutting geometry from the carrier body, so the cost of consumables is limited to replaceable inserts rather than whole tools. Compatibility with Taegutec insert variants broadens sourcing options and simplifies procurement, making the drill body an economical choice for repetitive drilling tasks. Simple integration into existing toolholders and fixtures The tool is specified with a 19 mm diameter and a 76 mm cutting length, while the shank length of 56 mm provides secure clamping in standard holders. At approximately 0.35 kg, the carrier balances mass for stability without imposing excessive load on spindles. For machine shops that require rapid changeovers, the dimension set supports common mounting practices and maintains concentricity across different setups. Quality supply and pragmatic service from Metav Sourcing through Metav ensures access to a broad stock range and a practical quality filter for the European market. The workflow advantage extends from clear availability to documentation and order handling at the Emmerich site; this supply chain stability supports uninterrupted production planning. For procurement managers seeking to consolidate suppliers, the combination of technical compatibility and dependable logistics reduces administrative overhead and risk. For procurement or technical queries about the Teknik Makina U412TM indexable drill body and its fit with existing processes, contact Metav Werkzeuge in Emmerich for tailored advice and stock information Technical data SKU: U412TM Manufacturer: Teknik Makina Designation: Indexable drill body Core data Diameter: 19 mm Overall length: 154 mm Cutting length: 76 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.35 kg Special features Compatible inserts: SOMT 0602 Compatible with Taegutec indexable inserts Indexable insert system for rapid insert exchange FAQ Which inserts fit the drill body? The U412TM indexable drill body accepts SOMT 0602 inserts; Taegutec equivalents can be used where compatible grades and geometries are specified. What is the shank diameter and how is it clamped? The carrier has a 25 mm shank, designed for secure clamping in standard holders to preserve concentricity and stability during drilling operations. What are the overall and cutting lengths? Overall length is 154 mm and cutting length is 76 mm, dimensions that suit common machining setups while offering sufficient reach for many through-hole applications. Is the U412TM suitable for high-volume production? Yes, the indexable system and robust shank design make the U412TM well suited to repetitive, high-volume drilling where swift insert replacement and stable running are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Solid Drill 76mm Cutting Length 56mm Shank Length, SPMG 0602 Compatible - Teknik Makina
Reliable machining performance is achieved with a 19 mm cutting diameter and a 25 mm shank that deliver consistent concentricity and secure clamping; compatible with SPMG 0602 inserts for fast indexable regrinds. Order directly via Metav Werkzeuge or contact the technical team for application advice. Indexable drill body U719TM — 19 mm diameter, SPMG 0602 compatible (Teknik Cutting Tools) The Indexable drill body U719TM is an insert-equipped drill body engineered for industrial drilling applications, offering repeatable hole quality and straightforward insert changes for production runs. 19 mm cutting diameter Compatible with SPMG 0602 inserts 25 mm solid shank for secure clamping 76 mm cutting length for deeper holes Higher throughput through stable engagement The U719TM’s 19 mm nominal diameter and 76 mm cutting length combine to support deeper-hole operations without sacrificing stability. The tool body geometry is designed to maintain concentricity during cutting, reducing chatter and rework. For production environments this translates to fewer scrap parts and more predictable cycle times, as the insert-and-body combination keeps the cutting forces well controlled and the tool life consistent. Fast indexable insert handling for short downtime Compatibility with SPMG 0602 inserts allows rapid insert replacement and minimal setup time. Insert-style drilling separates the cutting edge from the body, meaning that edge wear is addressed by swapping the insert rather than replacing the entire tool. This reduces inventory cost and simplifies maintenance while keeping machining windows shorter—beneficial for batch production and mixed-run series where machine uptime is critical. Shank design that ensures secure mounting A 25 mm shank diameter with a 56 mm effective shank length provides a secure interface with standard toolholders, supporting repeatable clamping force and precise axial alignment. Secure clamping lowers the risk of runout and supports higher feed rates where process stability is required. The mass and balance of the body (approx. 0.357 kg) are optimised to limit vibration while remaining easy to handle during tool changes. Practical application and tooling integration The U719TM is intended for integration into standard machining centre tool systems that accept a 25 mm shank and indexable-insert drill bodies. It is suitable for workshop and industrial settings that favour replaceable cutting geometry to reduce total tooling cost. For optimal results, match the SPMG 0602 insert grade and coating to the workpiece material and machining parameters; this combination determines surface finish and productivity more than the body alone. Contact Metav Werkzeuge for application guidance and availability of the Teknik Cutting Tools indexable drill body U719TM with 19 mm diameter and SPMG 0602 compatibility Technical data Article number: U719TM Name: Vollbohrer Manufacturer: Teknik Makina eClass: 21180201 Facts Diameter: 19 mm Overall length: 153 mm Cutting length: 76 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.357 kg Special features Compatible insert: SPMG 0602 Compatible with inserts from Taegutec and YG-1 Indexable insert design for fast edge replacement FAQ What insert type does this drill body use? The U719TM is designed for SPMG 0602 indexable inserts; choose the insert grade and coating to match the workpiece. Which manufacturers’ inserts are compatible? This drill body accepts Taegutec and YG-1 inserts that conform to the SPMG 0602 form. What shank size is required for mounting? A toolholder or chuck that accepts a 25 mm shank diameter and the indicated shank length is required for correct clamping. How deep can this tool drill in a single operation? The effective cutting length is 76 mm, which defines the maximum recommended depth for a single-pass hole with the installed insert. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Solid Drill 95mm Cutting Length 25mm Shank, 172mm Overall Length - Teknik Makina
Take advantage of the precise combination of a 19 mm drill diameter, a 95 mm cutting length and a 25 mm shank for consistent hole quality and quick insert changes; order the tool directly via Metav Werkzeuge or consult the team for machining compatibility. Indexable insert drill body U779TM — Ø 19 mm, 95 mm cutting length (Teknik Cutting Tools) Indexable insert drill body U779TM for industrial drilling operations where rapid insert changes and repeatable hole quality are required 19 mm drill diameter 95 mm cutting length 25 mm shank diameter Compatible with Korloy WCM-0302 inserts Precision performance for repeatable holes The indexable drill body is engineered to deliver consistent bore geometry across high volumes. With its Ø 19 mm body and a 95 mm cutting length, the tool provides stable support for the cutting edge and helps maintain concentricity through the full depth of cut. The modular insert system reduces tool change time: individual WCM-0302 inserts are replaced instead of the whole tool, lowering downtime and inventory cost. This design is particularly beneficial where reproducible tolerance adherence is required and where productivity gains come from reduced non-productive time. Robust connection and predictable handling A 25 mm shank diameter and a clamping length of 56 mm ensure a secure mechanical interface with standard tool holders, improving vibration damping and run-out stability. The relatively low mass of 0.397 kg contributes to balanced rotation and lowers spindle load without sacrificing rigidity. The tool’s overall length of 172 mm and the defined cutting section enable flexible set-ups on both vertical and horizontal machining centres. Compatibility with established insert geometries from Korloy simplifies procurement and replacement logistics for workshop planners. Indexable insert benefits and workshop efficiency Using an indexable system offers clear economic and operational advantages: insert rotation or replacement is faster than regrinding solid tools, cutting-edge geometries can be matched to different workpiece conditions, and overall tooling cost is reduced by replacing only wear parts. The body’s construction supports reliable chip control and repeatable clamping accuracy, which together improve first-pass yield. For purchasers seeking a pragmatic balance between performance and serviceability, this drill body integrates well into a consolidated tooling strategy that reduces supplier complexity while maintaining industrial standards. For technical checks, delivery options or to discuss toolholder compatibility, contact Metav Werkzeuge — their consultants provide pragmatic, workshop-focused advice and procurement support for Teknik Cutting Tools products Technical data Article number: U779TM Manufacturer: Teknik Makina Product: Indexable insert drill body (Vollbohrer) Facts Diameter: 19 mm Cutting length: 95 mm Total length: 172 mm Shank diameter: 25 mm Shank clamping length: 56 mm Weight: 0.397 kg Special features Compatible with Korloy WCM-0302 inserts Indexable-insert system for fast tool changes SKU for procurement: U779TM FAQ What inserts are compatible with this drill body? The drill body is compatible with Korloy WCM-0302 indexable inserts; the U779TM design accepts that insert geometry for straightforward replacement. How does the shank diameter affect machining performance? A 25 mm shank provides a rigid connection to the toolholder, improving run-out characteristics and helping the U779TM maintain hole accuracy over longer runs. Is the U779TM suitable for automated insert replacement workflows? Yes, the indexable design of the drill body supports rapid insert swaps and can be integrated into standard workshop maintenance cycles to keep machine uptime high. What information is required to confirm holder compatibility? Please provide toolholder clamping specifications and spindle interface details; Metav Werkzeuge can advise on holder match and setup for the U779TM drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Solid Drill Holder For Indexable Insert SPMG 0602 57mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of a stable Ø 19 mm cutting diameter, 57 mm effective cutting length and a 25 mm shank for secure clamping and consistent chip control — ideal for productive CNC drilling. Order the Vollbohrer directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer (Indexable drill body) by Teknik Makina — Ø 19 mm, 25 mm shank The Vollbohrer is a precision indexable drill body designed for metalworking and CNC applications, offering a compact overall length and compatibility with common insert systems for efficient holemaking. Indexable insert SPMG 0602 compatible Ø 19 mm cutting diameter 57 mm cutting length for deep holes 25 mm shank for secure clamping Precise geometry for repeatable hole quality The Vollbohrer from Teknik Makina combines a rigid tool body with a defined cutting zone to deliver consistent hole tolerances and predictable run-out. With an effective cutting length of 57 mm and overall length of 134 mm, the tool is tailored for operations where stability and repeatability matter. The Ø 19 mm diameter provides a balance between stiffness and accessibility, while the 25 mm shank ensures secure clamping in standard toolholders. These dimensions translate directly into reduced vibration and a lower risk of accelerated insert wear, improving process reliability in batch and single-part production. Broad insert compatibility to reduce tooling costs Designed to accept SPMG 0602 indexable inserts, the drill body is compatible with insert ranges from Taegutec and YG-1, enabling flexible procurement and simple regrinding strategies. An indexable system separates the cutting geometry from the body: worn edges are replaced quickly without changing the toolholder, which shortens downtime and lowers per-hole costs. The ability to use widely available insert grades also allows optimisation for materials and cutting conditions, supporting productivity gains and a favourable cost-benefit ratio over conventional solid drills. Practical dimensions and handling for workshop efficiency With a shank length of 56 mm and a compact total length of 134 mm, the tool is easy to handle during tool changes and occupies little space in the magazine. The modest weight of 0.33 kg contributes to dynamic balance and reduces spindle load during acceleration phases. The indexable drill body simplifies maintenance: insert changes are rapid and clamping interfaces are straightforward, which benefits set-up times on multi-spindle or CNC machines. Clear identification of the insert type and compatible manufacturers helps planning for spares and reduces ordering complexity. Engineered for industrial metalworking workflows This indexable drill body suits a variety of machining scenarios where hole quality, uptime and repeatability are priorities. The compact form and insert-driven concept fit lean tooling strategies and make the component a pragmatic choice for workshops aiming to streamline tooling inventory. Its specification supports rational decision-making: known dimensions and standard insert compatibility lead to predictable machine cycles and simplified logistics, strengthening overall production planning. For technical clarification, insert recommendations or to discuss fitment of the Teknik Makina indexable drill body (Vollbohrer, SKU U819TM) to specific machines, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and ordering support. Technical data Article number: U819TM ECLASS: 21180201 Manufacturer: Teknik Makina Dimensions & weight Diameter: 19 mm Overall length: 134 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.33 kg Features & compatibility Compatible insert: SPMG 0602 Compatible with Taegutec inserts Compatible with YG-1 inserts FAQ Which insert type does this drill body use? The Vollbohrer indexable drill body from Teknik Makina uses SPMG 0602 inserts; it is supplied as an indexable drill body (SKU U819TM) compatible with common insert grades. Can the tool be used with Taegutec or YG-1 inserts? Yes — the Teknik Makina Vollbohrer (SKU U819TM) is specified to accept inserts from Taegutec and YG-1, offering flexible sourcing and grade selection. What are the main dimensions to consider for clamping? Key dimensions for toolholding are the 25 mm shank diameter and 56 mm shank length; these figures apply to the Vollbohrer from Teknik Makina (SKU U819TM). Is this drill body suitable for deep-hole machining? The 57 mm cutting length and compact overall length of the Teknik Makina drill body (Vollbohrer, SKU U819TM) support deeper holemaking within its diameter class while maintaining rigidity. How does an indexable drill body reduce operating costs? By separating the tool body from replaceable inserts, the Teknik Makina Vollbohrer (SKU U819TM) allows rapid insert changes and use of optimised insert grades, lowering downtime and the per-hole tooling cost. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Solid Drilling Head 76mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of a robust solution that combines a 19 mm cutting diameter with a 25 mm shank for stable clamping and consistent hole quality; compatibility with Korloy WCM-0302 inserts reduces tooling downtime and keeps cycles running reliably — order directly via Metav Werkzeuge or consult the team for application advice. Indexable drill body (Vollbohrer) by Teknik Makina — 19 mm diameter, Korloy-compatible Indexable drill body for precision holemaking in machining centres and turning centres, designed to accept Korloy inserts for fast tool changes and consistent performance 19 mm cutting diameter Compatible with Korloy WCM-0302 inserts 25 mm shank for secure clamping 76 mm cutting length for deeper holes Consistent hole quality through stable geometry and insert system The combination of a 19 mm nominal diameter and a 25 mm shank delivers a stable toolholder interface that reduces chatter and supports repeatable results. As an indexable insert drill body, the design focuses on predictable cutting behaviour: the fixed cutting length of 76 mm and an overall length of 153 mm keep setups straightforward, while the lightweight construction (approx. 0.357 kg) minimises spindle load during prolonged cycles. These measurable attributes translate directly into lower scrap rates and fewer reworks, which is particularly relevant where production tolerances and throughput matter. Faster maintenance and reduced downtime with standard inserts Built to accept the WCM-0302 insert format from Korloy, this drill body simplifies service intervals and tool change routines. The indexable concept means the cutting edges can be refreshed in seconds without reclamping the entire tool, enabling quick restoration of cutting performance and shortening machine idle time. The standardised 25 mm shank ensures compatibility with common collet and chuck systems, supporting rapid tool swaps and reducing fixturing complexity in busy workshops. Practical workshop benefits: handling, life cycle and supply The unit’s compact mass and clear dimensional data make it easy to integrate into existing tool inventories: 153 mm overall length, 76 mm cutting length and the specified shank diameter allow planning for tool reach and clearance. The modular insert approach reduces long-term tooling costs because only the inserts require replacement rather than the whole body. Supplied as a precision-machined drill body, it supports consistent clamping and predictable tool life, contributing to smoother production planning and less unplanned maintenance. For reliable machining with Teknik Makina indexable drills, contact Metav Werkzeuge in Emmerich for tailored advice and fast supply — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: U606TM Manufacturer: Teknik Makina Diameter: 19 mm Overall length: 153 mm Cutting length: 76 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.357 kg Compatible insert type: WCM-0302 Compatible insert manufacturer: Korloy Indexable drill body SKU: U606TM FAQ What insert type does this drill body use? The drill body accepts WCM-0302 indexable inserts and is specified for inserts from Korloy, ensuring quick replacement and standardised tool management. Is the shank compatible with common toolholders? Yes, the 25 mm shank diameter is a common format and allows secure clamping in standard collets and chucks for stable machining. What are the key dimensions to check before setup? Verify the 19 mm cutting diameter, 76 mm cutting length and 153 mm overall length to ensure sufficient clearance and reach in the machine setup. How does the insert-based design affect workshop costs? Using replaceable inserts like WCM-0302 reduces long-term costs because only the cutting inserts are renewed; the drill body itself remains in service, lowering total cost of ownership. Which SKU and brand should be referenced when ordering? Reference SKU U606TM and the Teknik Makina indexable drill body when placing orders or requesting technical details. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20,5mm Indexable Drill for Korloy WCM- 0402 inserts - Teknik Makina
Product Technical Specifications: Order Number: U151TM Item: Indexable Drill usable with WCM- 0402 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Metric Information: Diameter: 20,5mm Weight: 0.36kg Total length: 139mm Diameter Connection: 25mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
20.5mm Solid Carbide Drill 60mm Cutting Length, 56mm Shank - Teknik Makina
Take advantage of a robust combination of precision, stable clamping and simple insert replacement to keep production running with minimal downtime; the compact design with a 25 mm shank and Ø 20.5 mm cutting diameter ensures reliable hole-making and easy integration into standard toolholders — order directly via Metav Werkzeuge or consult the technical team for application guidance. Indexable drill U315TM – Ø 20.5 mm, 25 mm shank by Teknik Makina Indexable drill U315TM is a purpose-built insert drill for medium-depth, high-repeatability holemaking in production environments, engineered for use with Taegutec SOMT 0703 inserts. Ø 20.5 mm cutting diameter 25 mm cylindrical shank Compatible with SOMT 0703 inserts 60 mm cutting length for deeper holes Consistent productivity through engineered geometry The U315TM is designed as an indexable drill that converts insert replacement into a rapid maintenance step rather than a full-tool change. With a 60 mm cutting length and a total length of 138 mm, the tool supports medium-deep holemaking while preserving rigidity thanks to its 25 mm shank. The combination of a defined cutting zone and standard shank diameter reduces vibration and improves tool life, which translates into fewer interruptions on the shop floor and a predictable production rhythm. For operations that value throughput, the drill’s configuration reduces cycle-time variability and supports stable hole tolerances. Less tooling complexity, greater operational flexibility Compatibility with Taegutec indexable systems and the specified SOMT 0703 insert format makes the tool an attractive option for shops aiming to rationalise their tooling inventory. Replacing worn inserts, rather than regrinding or replacing entire drills, lowers consumable costs and simplifies logistics. The drill’s Ø 20.5 mm diameter and standard clamping dimensions enable straightforward integration into many holders and adaptors, so the holder pool can be standardised and changeover routines accelerated. This results in a leaner toolroom and fewer interruptions during shifts. Repeatable hole quality with simplified upkeep The indexable concept delivers repeatable surface finish and concentricity without complex adjustments: when an edge degrades, the insert is indexed or swapped and machining resumes. The U315TM’s design concentrates wear on the removable cutting parts, reducing the need for specialist maintenance and enabling in-house teams to restore performance quickly. The tool’s moderate overall weight of 0.35 kg facilitates handling during set-up and reduces operator fatigue during multi-tool changes. Clear advantages include reduced downtime, predictable reconditioning, and stable process capability — key factors for consistent component quality. Contact Metav Werkzeuge for application advice and stock information on Teknik Makina indexable drills; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast delivery from Emmerich. Technical data Article number: U315TM Manufacturer: Teknik Makina Diameter: 20.5 mm Overall length: 138 mm Cutting length: 60 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.35 kg Compatible with Taegutec indexable inserts Insert type: SOMT 0703 Indexable drill design FAQ What insert type is required for this drill? The drill uses SOMT 0703 indexable inserts; it is designed to work with Taegutec-style inserts for quick replacement and consistent cutting performance. Which shank size is needed for clamping? A standard 25 mm cylindrical shank is specified for secure clamping in common toolholders and adaptors. Is this drill suitable for deep-hole applications? The tool provides a 60 mm cutting length and a total length of 138 mm, making it suitable for medium-depth holes where rigidity and repeatability are required. How does insert replacement affect uptime? Indexable inserts allow fast edge changes without removing the body from the spindle, so the U315TM reduces machine downtime compared with full-tool replacement. Can this drill be used across different materials? Material suitability depends on the chosen insert grade; the U315TM body is compatible with industry-standard inserts such as SOMT 0703, enabling versatile use when matched with appropriate insert geometry and grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20.5mm Solid Drill Head 60mm Cutting Length 139mm Overall Length, 25mm Shank - Teknik Makina
Product data inconsistency: the item is labelled as "Vollbohrer" (solid drill) while the data also specifies an indexable insert type "SPMG 0602" and compatibility with insert manufacturers Taegutec and YG-1, which raises concerns about the accuracy of the provided information. It is essential to cross-check these details to ensure that the product description aligns with its technical specifications, as any discrepancies could lead to confusion or incorrect usage. Please verify the product type, technical data, and compatibility for SKU U820-1TM thoroughly before proceeding with any further actions to avoid potential issues or misunderstandings.
20mm Indexable Insert Solid Drill for XC-- 10T304, 45mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of precise, indexable drilling with a 20 mm cutting diameter and a compact 102 mm overall length for reliable cycle times; order directly via Metav Werkzeuge or consult the technical team for application advice. Indexable drill (20 mm) for XC-- 10T304 indexable inserts — Teknik Makina The indexable drill for XC-- 10T304 indexable inserts is a compact drilling solution engineered for efficient chip control and rapid insert changes in CNC and production workshop environments *20 mm cutting diameter *For XC-- 10T304 indexable inserts *Overall length 102 mm *Shank length 56 mm Consistent hole quality with an indexable-system design The indexable drill is built to deliver repeatable hole accuracy across medium- to high-volume production runs. With a 20 mm diameter and a 45 mm cutting length, the tool body provides stable engagement and effective chip evacuation, reducing the need for frequent rework. Compatibility with XC-- 10T304 inserts ensures that cutting geometry is maintained by a proven insert family, while the Torx fastening arrangement (M4.5x11, T15) secures the insert reliably for stable cutting forces. This configuration translates into predictable tool life and fewer unscheduled interruptions on the machine. Minimise downtime through quick insert changes and standardised components Using an indexable insert system offers a clear cost-benefit compared with solid tooling: insert changes are fast, consumable costs are easier to forecast and maintenance routines are simplified. The drill’s 56 mm shank length and balanced design support repeatable clamping and run-out control on standard tool holders, enabling quick machine set-ups. The combination of a stable body and standardised fixing hardware means insert replacement can be completed in minutes, supporting higher machine uptime and efficient production planning. Versatile fit for workshops and production lines seeking dependable performance This compact drill body suits both jobbing shops and serial manufacturers that require a robust, easy-to-service drilling solution. The construction yields a low mass of 0.33 kg, making handling straightforward during set-up while still providing the stiffness needed for demanding cycles. Supplied for use with Ceratizit inserts of the XC-- 10T304 type, the assembly supports established supply chains for inserts and spare parts, helping to maintain continuity in production and reduce lead times. Contact Metav Werkzeuge today for tailored advice and to secure the Teknik Makina indexable drill compatible with XC-- 10T304 indexable inserts Technical Data SKU: U066TM Label: 20mm Vollbohrer XC-- 10T304 L102mm Manufacturer: Teknik Makina Compatible inserts: XC-- 10T304 (Ceratizit) Torx screw: M4.5x11 Torx key: T15 Facts Diameter: 20 mm Overall length: 102 mm Cutting length: 45 mm Shank length: 56 mm Weight: 0.33 kg Special features For XC-- 10T304 indexable inserts Compatible with Ceratizit inserts Fast replacement of indexable inserts Standard Torx fastening for secure clamping FAQ What inserts does this drill use? The drill is designed for XC-- 10T304 indexable inserts and is compatible with Ceratizit insert geometries. Is the fastening hardware included and what type is it? The tool uses a Torx fastening system with a M4.5x11 screw tightened with a T15 key for secure insert clamping. Which environments is the drill suited to? This indexable drill is suitable for both small workshops and production lines where fast insert changes and consistent hole quality are required. What is the article number or SKU for ordering? Ordering reference is U066TM, listed under the Teknik Makina indexable drill for XC-- 10T304 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide Boring Bar 60mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of the combination of high stability, flexible insert compatibility and precise tool support to keep production running with minimal interruptions; order the Vollbohrer directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Vollbohrer U820TM — Indexable insert drill with 20 mm diameter and 60 mm cutting length (Teknik Cutting Tools) The Vollbohrer U820TM is a robust indexable insert drill engineered for precision metalworking, optimised for CNC and turret applications where repeatable hole quality and short cycle times are required. 20 mm diameter for stable drilling 60 mm effective cutting length 25 mm shank for secure clamping Compatible with SPMG 0602 inserts Consistent hole quality through stable geometry and cutting length The design focuses on delivering repeatable results in series production: a nominal 20 mm diameter combined with a 60 mm cutting length and an overall length of 139 mm results in a centred, vibration-resistant cutting action that reduces scrap rates. The combination of a solid tool body and precise insert seating helps maintain hole tolerances across longer runs, while the indexed insert system enables quick replacement without repositioning the tool, supporting uninterrupted machining rhythms. Flexible insert system for reduced downtime and predictable costs This drill accepts SPMG 0602 indexable inserts and is compatible with leading manufacturers Taegutec and YG-1, enabling simple sourcing and predictable spare-part logistics. Using indexable inserts separates cutting-edge wear from the tool body, so cutting edges are renewed in seconds and tool life is extended; the economic benefit is achieved through reduced regrinding and lower inventory burden for full solid drills. For process planners, this means better uptime and a clear cost-per-hole calculation. Secure clamping and balanced handling for reliable machining A 25 mm shank diameter with a 56 mm shank length provides a reliable clamping interface in standard toolholders, ensuring high axial and radial stability during drilling. The tool’s measured weight of 0.347 kg contributes to a balanced spindle load and supports controlled feed rates and surface finishes. The construction was engineered to simplify tool change routines and to maintain concentricity under typical cutting forces, which benefits both roughing and subsequent finishing operations. For tailored advice on integrating this Teknik Cutting Tools indexable insert drill into production, contact Metav Werkzeuge in Emmerich for compatibility checks, supply options and technical consultation via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data SKU: U820TM Name: Vollbohrer Brand: Teknik Cutting Tools Facts Diameter: 20 mm Overall length: 139 mm Cutting length: 60 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.347 kg Special features For indexable inserts SPMG 0602 Compatible with Taegutec and YG-1 inserts Indexable insert drill body Files available (refer to product documentation) FAQ Which inserts fit this drill? The drill accepts SPMG 0602 indexable inserts; compatible manufacturers listed include Taegutec and YG-1 for easy sourcing. Is the tool suitable for CNC spindles and turret heads? Yes, the U820TM indexable insert drill is designed for secure clamping and stable rotation in standard CNC toolholders and turret setups. What are the critical dimensions to check before ordering? Verify the 20 mm diameter, 25 mm shank diameter and the 56 mm shank length against the machine’s holder specifications to ensure correct fit. How does the insert system reduce production costs? By using replaceable SPMG 0602 inserts, cutting edges can be renewed quickly without discarding the drill body, lowering lifecycle costs and minimising downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide Core Drill 100mm Cutting Length 25mm Shank, 179mm Overall Length - Teknik Makina
Take advantage of stable clamping and extended reach with a 20 mm drilling capacity and 100 mm cutting length, combined with compatibility for Korloy WCm-0402 indexable inserts to reduce tool changes and machining interruptions. Order the U780TM through Metav Werkzeuge or request technical advice from their specialists for integration into production. Indexable drill body U780TM — 20 mm diameter, 100 mm cutting length (Teknik Makina) The Indexable drill body U780TM is designed for production drilling with replaceable indexable inserts, offering long cutting reach for through and deep-hole operations in CNC machining applications. *20 mm diameter for stable core drilling *100 mm cutting length for deeper bores *25 mm shank diameter for secure clamping *Compatible with Korloy WCm-0402 inserts Precision and consistency for repetitive drilling The U780TM is engineered to deliver repeatable bore quality in mid- to high-volume machining. The combination of a 20 mm bore diameter and a 100 mm cutting length allows a single tool body to reach deeper workpieces without secondary extensions, which reduces setup complexity and cumulative run-out. The fixed shank geometry and mass distribution contribute to consistent tool engagement; this translates into predictable cycle times and reduced scrap rates in serial production. Robust clamping and axial stability A 25 mm shank diameter supports solid clamping in standard tool holders and quick-change systems. Greater shank stiffness diminishes vibration and deflection, improving hole roundness and surface finish. This mechanical stability benefits both medium-duty finishing and roughing passes, allowing fewer corrective operations and more efficient use of machining centres. The design focuses on secure retention to keep insert positioning accurate under the axial loads typical of deep drilling. Insert system that limits downtime Compatibility with WCm-0402 indexable inserts from Korloy means cutting edges can be replaced rapidly without reclamping the whole tool body. Indexable inserts reduce regrind cycles and lower tooling cost per hole by shifting the wear to inexpensive, replaceable tips. The modularity of the insert concept supports fast tool changes during shift work and facilitates inventory management of cutting grades tailored to materials and cutting conditions. Manufacturer and application clarity for procurement Supplied by Teknik Makina, the U780TM suits workshop environments that prioritise throughput and predictable maintenance. The tool body’s measured weight of 0.421 kg and standard connection dimensions allow straightforward integration into existing setups. For procurement and planning, the combination of insert availability, measurable geometry and established mounting standards makes the U780TM a practical choice for manufacturers seeking a balance of serviceability and machining reach. For a production-ready drilling solution based on the U780TM, consult Metav Werkzeuge for delivery options or technical matching to existing holders and machining strategies — Metav Werkzeuge’s team in Emmerich can advise on compatibility and supply. Technical data Article number: U780TM Manufacturer: Teknik Makina Designation: Indexable drill body Core data Diameter: 20 mm Overall length: 179 mm Cutting length: 100 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.421 kg Compatibility & features Compatible inserts: WCm-0402 Compatible insert manufacturer: Korloy Files: 62de7ec30aced56449540eb2, 62de7dd80aced56449540e82 FAQ What materials is this tool body suitable for? The U780TM indexable drill body accepts WCm-0402 inserts (Korloy) and is suitable for a wide range of common workshop materials; insert grade selection should be matched to the workpiece material for optimal performance. How does the insert system affect maintenance? Using WCm-0402 indexable inserts on the U780TM reduces maintenance time because worn cutting edges are replaced quickly, avoiding the need to replace or regrind the entire tool body. Which holder or chuck is required for secure mounting? The tool body’s 25 mm shank diameter is compatible with standard tool holders and clamping systems; check the machine’s tooling interface to confirm holder type and clamping method. Is the U780TM suitable for deep-hole drilling applications? Yes; the 100 mm cutting length and 179 mm overall length give extended reach suitable for deeper bores while maintaining stability for serial machining. Where can technical data sheets or CAD files be obtained? Technical documentation associated with the U780TM (file IDs provided) can be requested through Metav Werkzeuge’s sales or technical department for integration and verification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide Drill 60mm Cutting Length 138mm Overall, 25mm Shank - Teknik Makina
Take advantage of the combination of precise insert compatibility, compact overall length and a rigid 25 mm shank for dependable drilling performance; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Indexable drill U314TM — 20 mm diameter, 25 mm shank (Teknik Cutting Tools) The Indexable drill U314TM is an indexable insert drill body engineered for precision holemaking where fast insert changes and consistent geometry are required *Compatible with Taegutec SOMT 0703 inserts *Rigid 25 mm shank for stable clamping *60 mm cutting length for medium-depth holes *Compact overall length of 138 mm for tight setups Precision and predictable hole quality from indexable inserts The modular design delivers predictable geometry by using replaceable inserts, which ensures consistent hole dimensions over repeated cycles. With a 20 mm diameter and a 60 mm cutting length, the tool balances reach and rigidity to maintain bore tolerance. The U314TM’s configuration reduces the frequency of complete tool replacement; only the worn insert is exchanged, which lowers tooling costs and shortens downtime while keeping machining outcomes repeatable. Stable clamping and compact design for production reliability A 25 mm shank and a 138 mm overall length provide a compact yet robust package suited to confined toolholders. The shorter clamping footprint helps to reduce deflection under cutting loads, improving roundness and axial runout stability. For workshops requiring reliable set-up in multi-spindle or constrained fixturing, this design mitigates vibration and supports higher process consistency. Insert compatibility that simplifies logistics and maintenance Designed to accept SOMT 0703 inserts from Taegutec, the drill body streamlines inventory by using an established insert format. The ability to source standard indexable inserts means faster replenishment and predictable wear behaviour; inserts can be rotated or replaced without regrinding solid tools. This results in easier maintenance and cost-effective stocking for production or service environments. Practical dimensions and handling benefits for everyday use Key handling advantages include a clamping length of 56 mm and a low unit weight of 0.347 kg, which together make the tool easy to mount and less demanding on tool changers. The measured dimensions support straightforward tool management and quick changeover routines, contributing to shorter machine idle times and improved throughput without sacrificing stability. Discuss specification matching and delivery options with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and procurement support Technical data Article number: U314TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Product type: Indexable drill body Compatible inserts: SOMT 0703 (Taegutec) Core dimensions Diameter: 20 mm Overall length: 138 mm Cutting length: 60 mm Shank diameter: 25 mm Clamping length: 56 mm Weight: 0.347 kg Features & compatibility Indexable insert concept Accepts Taegutec SOMT 0703 inserts Compact length for tight tool setups Rigid 25 mm shank for stable clamping FAQ What insert type does the tool accept? The U314TM accepts SOMT 0703 indexable inserts; Taegutec-compatible inserts are recommended for optimal fit. Is the shank diameter suitable for standard holders? The 25 mm shank is compatible with common 25 mm holders and provides a stable clamp for the indexable drill body. What is the effective cutting length of the drill? The tool offers a cutting length of 60 mm, providing medium-depth drilling capability while maintaining rigidity. Can inserts be rotated to extend service life? Yes, the SOMT 0703 inserts fitted to the U314TM can be indexed or replaced to extend operational life and reduce tooling costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide Drill 80mm Cutting Length 159mm Overall Length, 25mm Shank - Teknik Makina
Take advantage of the combination of indexable insert compatibility, a 20 mm cutting diameter and a stiff 25 mm shank for reliable, repeatable drilling in production environments; order the Indexable drill body U720TM directly via Metav Werkzeuge or ask our consultants if further technical details are required Indexable drill body U720TM – 20 mm cutting diameter, SPMG 0602 insert compatible (Teknik Makina) The Indexable drill body U720TM is designed for economical, high‑productivity drilling applications where replaceable inserts and rigid clamping matter Compatible with SPMG 0602 inserts 20 mm cutting diameter 80 mm cutting length for deep holes 25 mm shank for secure clamping Reduce tooling cost with indexable inserts and robust design The U720TM tool body combines the advantages of indexable inserts with a compact, rigid construction to lower overall tooling expense. By using replaceable SPMG 0602 inserts the need to regrind is eliminated and tool life is effectively managed; this leads to fewer tool changes and reduced machine downtime. The 20 mm cutting diameter together with an 80 mm cutting length provides a balance between reach and stiffness, while the 25 mm shank ensures secure contact in standard toolholders for consistent performance. Consistent hole quality and machine‑friendly dimensions Designed for shop floors and CNC centres alike, this drill body delivers repeatable hole geometry by combining controlled insert geometry with a stable tool carrier. The overall length of 159 mm gives reach where needed without excessive overhang, supporting accurate concentricity and surface finish. Compatibility with insert manufacturers Taegutec and YG‑1 simplifies procurement and stocking, enabling standardisation of inserts across multiple tool types and helping to maintain uniform hole quality across batches. Streamlined tool management for workshop reliability The U720TM’s modest mass (approx. 0.383 kg) and standardised shank/insert interfaces simplify handling, storage and replacement procedures in busy production settings. Consistent interfaces reduce inventory complexity: one tool body accepts a well‑known insert size, while the readily available insert format keeps downtimes short. Supplied by Teknik Makina and available through Metav Werkzeuge, the tool benefits from a European quality filter and dependable logistics to support uninterrupted operation on the shop floor. For tailored technical advice and reliable supply of the Teknik Makina U720TM indexable drill body, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, expert support Technical data SKU: U720TM Manufacturer: Teknik Makina Product: Indexable drill body Dimensions & weight Cutting diameter: 20 mm Overall length: 159 mm Cutting length: 80 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.383 kg Compatibility & features Insert type: SPMG 0602 Compatible insert manufacturers: Taegutec, YG‑1 Indexable insert drilling body FAQ Which insert type fits this drill body? The U720TM accepts SPMG 0602 indexable inserts, a common size that simplifies replacement and inventory. What shank size is required for machine mounting? The tool has a 25 mm shank diameter and a 56 mm shank length for secure clamping in standard holders. How deep can this tool cut in a single setup? The effective cutting length is 80 mm, enabling deeper hole work while preserving rigidity for consistent bore quality. Is the U720TM compatible with inserts from major suppliers? Yes, the drill body is compatible with inserts from Taegutec and YG‑1, allowing flexible sourcing options. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Solid Carbide Drilling Head 40mm Cutting Length 25mm Shank, 119mm Overall Length - Teknik Makina
Benefit from precise holemaking, insert compatibility and robust clamping for stable cycle times; order directly via Metav Werkzeuge or consult our specialists for application advice. Indexable Insert Drill U108TM – Ø 20 mm, 119 mm overall length (Teknik Makina) The Indexable Insert Drill U108TM is an indexable insert drill body engineered for reliable through-hole operations in production and workshop environments, compatible with WCM‑0402 inserts for efficient insert changeover 20 mm cutting diameter for standard holes Compatible with Korloy WCM-0402 inserts 40 mm effective cutting length 25 mm shank diameter for secure clamping Faster, repeatable holemaking through optimised geometry The U108TM drill body offers a combination of a compact design and a clear specification set to keep cycle times predictable. With a Ø 20 mm cutting diameter and a 40 mm cutting length, the tool supports repeated holemaking with consistent results, reducing scrap and rework. The 119 mm overall length balances reach and rigidity, helping to maintain concentricity and minimise runout when mounted in appropriate holders. Explaining the benefit: a defined effective cutting length means bosses and fixtures can be designed around a known cutting zone, simplifying process planning and reducing set-up variations for series production. Economical tooling through insert compatibility and quick serviceability Compatibility with WCM-0402 insert geometry allows rapid edge changes without replacing the whole tool body, converting maintenance time into productive machining minutes. Using standardised indexable inserts from trusted suppliers such as Korloy reduces per‑hole tooling costs and simplifies stock management for workshop stores. The modular approach also enables the selection of grades and coatings to suit specific workpiece materials, offering a pragmatic cost-benefit: lower running costs per hole and shorter downtime for insert replacement compared with solid carbide alternatives. Secure clamping and machine-friendly interface for stable machining A 25 mm shank provides a solid interface for chucks and collet systems, improving stability under load and helping to avoid chatter. The robust shank dimension supports secure clamping and a consistent connection to the spindle, which contributes to reduced vibration and extended insert life. For machine operators, this translates into fewer corrective interventions and a steadier process window, particularly important when running medium-length production cycles where tool stability directly affects surface finish and positional tolerance. Practical applications and shop-floor benefits Designed as a general-purpose indexable drilling solution, the tool body is suited to workshops that prioritise serviceability and predictable output. The construction supports repeated insert changes and simplifies inventory: keep a small selection of WCM-0402 inserts and one tool body per diameter to cover many jobs. The relatively low mass of the assembly aids acceleration and deceleration on CNC machines, making the system suitable for both single‑station machining centres and multi‑spindle production cells where tooling change speed and reliability are critical. Discuss specific requirements with Metav Werkzeuge — request a tailored specification or a quotation for the Teknik Makina U108TM indexable insert drill by contacting Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: U108TM Manufacturer: Teknik Makina Product designation: Indexable insert drill (translated from Vollbohrer) Facts Diameter: 20 mm Overall length: 119 mm Cutting length: 40 mm Shank (aufnahme) diameter: 25 mm Weight: 0.327 kg Special features Compatible insert type: WCM-0402 Recommended insert supplier: Korloy Indexable insert drilling principle Robust shank for secure clamping FAQ What insert type fits this drilling body? The drilling body accepts WCM-0402 indexable inserts; Korloy inserts with this designation are compatible with the U108TM. Which shank size is required for correct clamping? A 25 mm shank diameter is specified for the U108TM to ensure secure clamping and machine compatibility. What is the effective cutting length of the tool? The tool provides a 40 mm cutting length, enabling controlled hole depth and repeatable machining. Is the tool suitable for long-reach drilling applications? With a 119 mm overall length, the tool offers modest reach while maintaining rigidity; it is optimised for standard through-hole and medium-reach operations rather than extreme long-reach scenarios. How does indexable insert tooling reduce running costs? By replacing only the worn inserts (WCM-0402) rather than the entire body, the system lowers per-hole tooling expense and shortens maintenance downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Carbide Through Coolant Drill 40mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of the combination of reliable indexable-insert performance, a compact 25 mm shank and a 40 mm cutting length for efficient, repeatable holemaking; order the U920TM indexable insert drill directly via Metav Werkzeuge or ask our consultants if needed. U920TM indexable insert drill – Ø20 mm, 25 mm shank (Teknik Makina) U920TM is an indexable insert drill intended for stable, cost-effective production drilling in general engineering and CNC machining applications. *Indexable insert drill for SPMG 0602 *Cutting diameter Ø20 mm *25 mm shank with 56 mm clamping length *40 mm cutting length for deeper holes High-efficiency holemaking with indexable inserts The design focuses on productive drilling cycles by combining an indexable insert concept with a substantial 40 mm cutting length, enabling longer uninterrupted drilling operations compared with short-tip solutions. Using SPMG 0602 inserts reduces per-hole tooling cost because inserts are replaceable, and wear is limited to the insert rather than the whole tool body. The result is a measurable improvement in throughput and a predictable maintenance rhythm for the workshop. Stable clamping and consistent set-up reduce downtime A robust 25 mm shank and a 56 mm engagement length deliver secure seating in toolholders, minimising runout and vibration during machining. The tool’s compact 119 mm overall length and modest weight (0.334 kg) support rapid spindle acceleration and simpler balancing on CNC machines. Compatibility with established insert vendors such as Taegutec and YG-1 streamlines procurement and ensures swift re‑tooling when inserts require replacement. Versatile integration for production environments The modular nature of the drill body allows it to be used where indexable systems are preferred for repeatability and cost control. The combination of Ø20 mm bore capability and a standard insert type makes the tool well suited to serial drilling in components where predictable tool life and quick insert changes are priorities. Built by Teknik Makina, the design aims to offer reliable performance across multiple shifts while keeping spare-part logistics straightforward for maintenance teams. Contact Metav Werkzeuge for product availability, technical specification sheets and delivery options for the Teknik Makina U920TM indexable insert drill — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: U920TM Manufacturer: Teknik Makina Designation: Vollbohrer ECLASS: 21180201 Facts Diameter: 20 mm Overall length: 119 mm Cutting length: 40 mm Shank diameter: 25 mm Shank clamping length: 56 mm Weight: 0.334 kg Special features Compatible with SPMG 0602 indexable inserts Compatible insert manufacturers: Taegutec, YG-1 Intended for indexable insert drilling systems FAQ What insert type does this drill use? The U920TM drill accepts SPMG 0602 indexable inserts and is compatible with inserts from manufacturers such as Taegutec and YG-1. What are the main dimensions to consider for toolholder selection? Key dimensions are Ø20 mm cutting diameter, 25 mm shank diameter, 56 mm clamping length and 119 mm overall length. Is the tool suitable for serial production on CNC lathes or milling centres? Yes, the indexable insert concept of this drill is specifically intended to support serial production on CNC machining centres where fast insert changes and repeatability are required. How does the insert system affect running costs? Using replaceable SPMG 0602 inserts reduces running costs because only the insert needs replacement when worn, preserving the drill body and lowering per-hole expenditure. Can inserts from other manufacturers be used? Inserts from established suppliers such as Taegutec and YG-1 are listed as compatible, offering flexibility in sourcing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Drill 45mm Cutting Length 56mm Shank Length, 25mm Shank Diameter - Teknik Makina
Compact indexable drill body with Ø20 mm cutting diameter, 25 mm shank and 45 mm cutting length for deeper holes; precise insert fit for Korloy QC--10T304. Reduced tool changes and predictable repeatability support efficient batch production. Order the insert drill body directly via Metav Werkzeuge or ask our consultants if needed. Indexable insert drill body U040TM by Teknik Cutting Tools — Ø20 mm, 25 mm shank U040TM is an indexable insert drill body designed for production drilling where secure clamping and fast insert replacement matter, especially in CNC machining and toolroom applications. Ø20 mm cutting diameter 25 mm shank diameter for secure clamping Compatible with Korloy QC--10T304 inserts 45 mm cutting length for deep holes Precision and productivity for repetitive holemaking The U040TM functions as a robust indexable drill body that combines a compact profile with dependable repeatability. With a 25 mm shank and a Ø20 mm cutting diameter, the tool is engineered to fit standard toolholders and maintain concentricity under load. The replaceable insert system reduces downtime: when a cutting edge wears, only the Korloy QC--10T304 insert needs replacement, keeping maintenance straightforward and costs predictable. For production environments, this means fewer set-ups and consistent hole quality across batches. Designed for secure clamping and longer engagement A 56 mm clamping length and a total length of 116 mm provide stability for deeper operations while the 45 mm cutting length permits extended engagement without resorting to excessively long tools that increase deflection. The compact mass of 0.33 kg supports high-speed indexable drilling with lower spindle load and improved surface finish. Where positional accuracy and repeatable hole diameter are crucial, the assembly reduces vibrations and contributes to shorter cycle times — a clear rational advantage for production-focused workshops. Compatibility, versatility and simple replacement strategy Engineered for compatibility with Korloy inserts, the drill body accepts the proven QC--10T304 insert family, enabling quick index changes and flexible cutting-edge selection based on workpiece material. The tool is suited to standard machining centres and toolholders that accept a 25 mm shank diameter. For procurement and planning, this means simplified spare inventory: the body remains reusable while inserts are stocked as consumables, improving total cost of ownership and operational readiness. Contact Metav Werkzeuge for a machining consultation and secure the Teknik Cutting Tools U040TM insert drill body; Metav Werkzeuge can confirm fitment and application suitability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: U040TM Manufacturer: Teknik Makina Article type: Insert drill body Compatible inserts: QC--10T304 (Korloy) Shank diameter: 25 mm Cutting diameter: 20 mm Cutting length: 45 mm Clamping length: 56 mm Overall length: 116 mm Weight: 0.33 kg FAQ What insert type does this drill body use? The drill body accepts Korloy QC--10T304 indexable inserts; this ensures fast replacement and a consistent cutting geometry. Which shank size is required for mounting? The tool requires a 25 mm shank receptacle; ensure the machine holder matches this diameter for secure clamping. Is the tool suitable for deep holes? With a 45 mm cutting length and a 116 mm overall length, the body is suited to moderately deep holes where rigidity is required. Can the same body be re-used after insert wear? Yes — the body is designed for repeated use while worn inserts are replaced, reducing the need for full-tool replacement. Which manufacturer produces this drill body? The U040TM insert drill body is supplied by Teknik Makina and intended for use with Korloy inserts when matching holders are employed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Schnellere Fertigung durch präzise Vollbohrer für industrielle Bearbeitungen
Vollbohrer, auch bekannt als Massivbohrer oder Durchgangsbohrer, sind speziell entwickelte Zerspanungswerkzeuge zum direkten Einbringen von Bohrungen in massives Werkstückmaterial. Sie werden bevorzugt auf Drehmaschinen und Bearbeitungszentren eingesetzt, um in einem einzigen Arbeitsgang große Materialvolumina wirtschaftlich abzutragen.
Effiziente Funktion und technischer Kontext für robuste Anwendungen
In der Praxis ermöglichen Vollbohrer das Bohren ohne vorheriges Zentrieren oder Vorbohren, wodurch Rüstzeiten reduziert werden. Bei Varianten ohne Innenkühlung wird der Kühlschmierstoff über externe Maschinendüsen zugeführt; diese Auslegung ist jedoch nur bei extrem kurzen Bohrtiefen und sehr leicht zerspanbaren Materialien geeignet, da produzierte Späne den Bohrkanal schnell verschließen können. Industrieller Standard sind Vollbohrer mit Innenkühlung: durch den Werkzeugkörper verlaufende Kanäle transportieren das Kühlmittel unter hohem Druck direkt an die Schneiden der Bohrerspitze. Dadurch werden Reibungswärme abgeführt und Spänemengen zuverlässig aus dem Bohrloch gespült, was ein Festklemmen, Riefenbildung und plötzliche Werkzeugbrüche effektiv verhindert.
Optimierte Produktion: Konkrete Vorteile für die Fertigung
- Reduzierte Rüstzeit durch Bohren in einem Arbeitsgang mit Vollbohrer oder Einstufenbohrer.
- Verbesserte Spanabfuhr dank innenliegender Kühlmittelkanäle, die die Standzeit verlängern.
- Minimiertes Bruchrisiko durch gezielte Kühlung und Druckspülung an der Bohrerspitze.
- Höhere Prozesssicherheit bei der Bearbeitung großer Materialvolumina auf Bearbeitungszentren.
- Anpassbar an Maschinentyp: Vollbohrer und Durchgangsbohrer sind für Drehmaschinen und Fräszentren verfügbar.
Metav als starker Partner für Beschaffung und Beratung
Metav fungiert als Qualitätsfilter und bietet mit Sitz in Emmerich ein lückenloses Sortiment für präzise Werkzeuge. Mit über 48.000 Kunden und mehr als 250.000 Produkten reduziert Metav die Lieferantenanzahl und liefert verlässlich an die Werkbank. Das Sortiment umfasst sorgfältig ausgewählte Vollbohrer, Massivbohrer und Durchgangsbohrer sowie Beratung zur richtigen Auslegung von Innenkühlung und Schneidengeometrie.
Kurz und prägnant: Wann Vollbohrer die beste Wahl sind
Für Anwendungen, in denen Bohren in einem Durchgang, sichere Spanabfuhr und maximale Prozesssicherheit gefordert sind, sind Vollbohrer die bevorzugte Lösung. Vollbohrer sowie die Varianten Massivbohrer und Durchgangsbohrer sorgen für effiziente, zuverlässige Bohrprozesse in der Serien- und Einzelfertigung.
FAQ
Was ist der Unterschied zwischen Vollbohrer mit Innenkühlung und ohne Innenkühlung?
Vollbohrer mit Innenkühlung führen das Kühlmittel durch Kanäle im Werkzeugkörper direkt an die Schneide und ermöglichen so effektive Wärmeabfuhr und Spantransport; Varianten ohne Innenkühlung werden von außen über Maschinendüsen gekühlt und eignen sich nur für sehr kurze Bohrtiefen und weiche Materialien.
Warum reduziert die Innenkühlung das Risiko von Werkzeugbruch bei Vollbohrern?
Die Innenkühlung führt das Kühlmittel unter hohem Druck an die Bohrerspitze, wodurch Reibungswärme reduziert und Späne aus dem Bohrloch gespült werden; dadurch werden Festklemmen und riefenbildung vermieden, was Werkzeugbrüche verhindert.
Auf welchen Maschinentypen werden Vollbohrer typischerweise eingesetzt?
Vollbohrer und ihre Synonyme Massivbohrer sowie Durchgangsbohrer werden hauptsächlich auf Drehmaschinen und Bearbeitungszentren eingesetzt, dort ermöglichen sie das wirtschaftliche Abtragen großer Materialmengen in einem Arbeitsgang.
Wie unterstützt Metav bei der Auswahl des passenden Vollbohrers?
Metav bietet ein umfangreiches Sortiment und fachkundige Beratung aus Emmerich; Kunden profitieren von Produktauswahl, technischen Informationen zur Innenkühlung und Empfehlungen für die passende Schneidengeometrie.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com