Vollbohrer für effizientes Tiefbohren in Massivwerkstoff
Vollbohrer ermöglichen das direkte Einbringen von Bohrungen in Massivwerkstoff und sparen durch den Einsatz auf Drehmaschinen und Bearbeitungszentren wertvolle Prozesszeit, indem sie große Materialvolumina in einem Arbeitsgang abtragen; dabei bietet die Variante mit Innenkühlung die notwendige Kühlmittelzufuhr, um hohe Reibungswärme abzuführen und Späne sicher aus dem Bohrloch zu spülen, während Ausführungen ohne Innenkühlung nur für sehr kurze Bohrtiefen und leicht zerspanbare Materialien geeignet sind; als Synonyme gelten Massivbohrer und Vollkernbohrer, die in der Zerspanung vor allem durch ihre Standzeit und Prozesssicherheit überzeugen.
14.5mm Solid Drill Holder 56mm Cutting Length, 50mm Shank Length, 128mm Overall - Teknik Makina
Take advantage of consistent holemaking thanks to the 14.5 mm nominal diameter, the stabilising 20 mm shank and the 56 mm effective cutting length for reliable production runs. Order the Vollbohrer U403TM directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer U403TM — Indexable-insert drill body with 14.5 mm diameter and 20 mm shank (Teknik Makina) A Vollbohrer U403TM designed as a drill body for replaceable SOMT 0502 inserts, intended for efficient, repeatable holemaking in workshop and light-production environments. *14.5 mm nominal diameter *20 mm shank for stable clamping *56 mm effective cutting length *Compatible with SOMT 0502 inserts Consistent, measurable hole accuracy for small-series production The drill body delivers repeatable diameter control by combining a true shank interface with a defined cutting length, which reduces setup variability. With a 14.5 mm nominal diameter and a 20 mm shank, the component is engineered to transfer torque and minimise runout during drilling cycles. The 56 mm cutting length provides sufficient engagement for through-holes and shallow blind holes while keeping chip evacuation predictable. These measurable parameters support process stability and help maintain tolerances across batches, reducing scrap and rework. Fast insert changes and clear compatibility reduce machine downtime Designed for indexable inserts, the tool accepts SOMT 0502 plates and is compatible with inserts from Taegutec, which simplifies procurement and replacement. The insert-based concept separates cutting geometry from the body: worn cutting edges are replaced instead of the entire tool, cutting maintenance time and tooling costs. The body’s 50 mm holder length and standard 20 mm interface make it suitable for common drill holders and spindles, enabling quick changeovers without custom adaptors. This modularity benefits shops that alternate materials or run short production batches. Robust design for workshop and on-machine applications With an overall length of 128 mm and a low mass of 0.175 kg, the drill body balances rigidity and manoeuvrability. The compact geometry helps to reduce vibrating tendencies while maintaining sufficient stiffness for controlled machining. The construction is tailored to indexable-insert workflows, supporting a clear chip flow and stable seat for the insert seat. For engineers specifying tooling, the component offers a practical mix of durability and serviceability, making it suitable for maintenance, prototyping and serial production where consistent results are required. Contact Metav Werkzeuge to discuss the Vollbohrer U403TM, confirm suitability for the intended machine and select the correct SOMT 0502 inserts and holders for optimal performance. Technical data Article number: U403TM Brand: Teknik Makina Designation: Vollbohrer U403TM Numbers Diameter: 14.5 mm Overall length: 128 mm Weight: 0.175 kg Shank diameter: 20 mm Cutting length: 56 mm Holder length: 50 mm Special features Compatible inserts: SOMT 0502 Recommended insert manufacturer: Taegutec Indexable-insert drill body Suited for workshop and light production FAQ What insert type fits this drill body? The drill body accepts SOMT 0502 indexable inserts; Teknik Makina’s U403TM is specified for that plate type and matches standard insert geometries. Is the shank compatible with common toolholders? Yes, the 20 mm shank is a common industrial interface and the U403TM is designed for stable clamping in standard drill holders. Can the tool be used for both through-holes and blind holes? The 56 mm cutting length on the U403TM makes it suitable for through-holes and for many shallow blind-hole applications, depending on the workpiece and holder setup. Which insert manufacturer is recommended? Taegutec inserts are recommended; the U403TM is compatible with Taegutec plates and the SOMT 0502 designation. How does the tool help reduce machining costs? By using replaceable inserts, the U403TM reduces tooling waste and downtime since only the insert is renewed at wear, not the entire body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Carbide Boring Bar 42mm Cutting Length, 50mm Shank Length - Teknik Makina
Take advantage of a robust combination of precise hole geometry, rapid insert replacement and stable clamping for reliable production results; order the tool via Metav Werkzeuge or consult our specialists for application advice. U006TM Solid drill — 14 mm diameter, 110 mm overall length (Teknik Makina) The U006TM solid drill for indexable‑insert drilling, engineered for repeatable hole quality in workshop and CNC applications 14 mm cutting diameter 110 mm overall length Compatible with SPMT 0502 inserts 20 mm shank for secure clamping Precision drilling that stabilises production The U006TM delivers consistent hole geometry through a defined cutting profile and a 42 mm cutting length, which ensures full engagement of the effective flute during standard cycle depths. With a 14 mm nominal diameter and 110 mm overall length, the tool achieves predictable runout and repeatability across batches, reducing rework and inspection effort. This focus on dimensional stability supports higher first‑pass yields and steadier throughput in serial production. Adaptable insert system reduces downtime Designed for use with SPMT 0502 indexable inserts, the toolhead allows fast insert replacement and straightforward inventory management. Compatibility with Korloy plates means existing insert stocks can be used without adapter changes. The result is lower tooling downtime and a clearer cost profile per hole — a rational improvement that shortens changeover time and lowers total machining cost over production runs. Secure clamping for lower vibration and longer life A 20 mm shank and a balanced tool body reduce flex and contribute to stable spindle interaction. The modest mass of 0.158 kg helps limit centrifugal imbalance at moderate speeds while preserving rigidity where it matters most — at the cutting edge. The secure clamping provided by the shank specification diminishes chatter, improving surface finish and extending insert life, which in turn reduces consumable spend and machine idle time. Suitable for modern workshops and machining centres As an indexable‑insert drilling solution, this solid drill is suited to routine holemaking tasks in production settings where quick insert changes and consistent output are priorities. The combination of defined geometry, standard insert interface and compact overall design makes the tool a pragmatic choice for shops aiming to streamline tooling families. For applications requiring predictable performance and easy maintenance, this machining solution supports operational efficiency and planning. Contact Metav Werkzeuge for tailored technical advice and secure supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U006TM Designation: Solid drill Manufacturer: Teknik Makina ECLASS: 21180201 Facts Diameter: 14 mm Overall length: 110 mm Cutting length: 42 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.158 kg Special features Compatible with SPMT 0502 indexable inserts Compatible insert manufacturer: Korloy Indexable‑insert drilling concept FAQ Which indexable inserts fit this tool? The U006TM accepts SPMT 0502 inserts; Korloy plates and equivalent SPMT‑format inserts are compatible with the tool head. What are the key dimensions to consider? Diameter 14 mm, overall length 110 mm and cutting length 42 mm are the principal dimensions for fixture planning and cycle programming. Is the drill suitable for CNC machining centres? Yes — the tool’s 20 mm shank and indexable‑insert system make the U006TM appropriate for CNC machines where rapid insert replacement and repeatable hole quality are required. How does the tool mass affect performance? At 0.158 kg, the tool balances rigidity and manageable mass to help reduce vibration while preserving stability at typical spindle speeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Carbide Through Coolant Drill 28mm Cutting Length, 50mm Shank - Teknik Makina
Take advantage of a robust combination of compatibility, precise cutting geometry and compact design to keep drilling cycles consistent and tool changes quick. Order the insert drill body directly via Metav Werkzeuge or consult the team for application-specific guidance. Insert drill body U914TM — 14 mm diameter, 20 mm shank by Teknik Makina Insert drill body U914TM for efficient holemaking in production and workshop environments, designed to accept SÜMG 0502 indexable inserts from major suppliers. Compatible with SÜMG 0502 indexable inserts 14 mm nominal diameter for mid‑range drilling 20 mm shank for stable toolholding Short cutting length for compact setups Consistent hole quality at production rates The insert drill body is engineered to deliver reliable concentricity and repeatable hole diameter across batches. With a 14 mm nominal size and a cutting length of 28 mm, the body is optimised for moderate depths where axial stiffness and chip evacuation are critical. Using indexable inserts reduces downtime for regrinding; inserts from Taegutec or YG‑1 can be fitted quickly, preserving process stability and supporting higher spindle speeds without loss of accuracy. Fast tooling changes and simple stock handling The tool’s design—with a 20 mm shank and a dedicated 50 mm mounting length—supports quick clamping and minimal overhang, which improves rigidity and reduces vibration. The ability to accept standard SÜMG 0502 inserts shortens rework cycles and simplifies spare‑parts management in the workshop. This configuration helps maintain throughput while keeping maintenance effort low, ensuring a practical balance between productivity and workshop logistics. Practical benefits for mixed production environments Weighing just 0.152 kg and measuring 96 mm overall, the drill body suits compact machines and toolholders where space and balance matter. The indexed insert system provides the flexibility to change grades or geometries for different materials without replacing the entire tool carrier. For operations that require reliable, repeatable holes with economical consumable costs, this body offers a direct route to consistent results and predictable tool budgets. For specification checks, availability and delivery from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: U914TM Brand: Teknik Makina Insert type: SÜMG 0502 Facts Diameter: 14 mm Overall length: 96 mm Cutting length: 28 mm Shank diameter: 20 mm Mounting length: 50 mm Weight: 0.152 kg Special features Compatible insert manufacturers: Taegutec, YG‑1 Suitable for indexable inserts Compact, workshop‑friendly dimensions FAQ What insert type fits this drill body? The insert drill body accepts SÜMG 0502 indexable inserts; inserts from Taegutec or YG‑1 are compatible with this design. Which diameter and length does the tool provide? The U914TM is specified for a 14 mm diameter with a 96 mm overall length and a 28 mm cutting length. Is the shank suitable for common toolholders? A 20 mm shank diameter and a 50 mm mounting length make the body suitable for standard tool‑holding systems that accommodate a 20 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Carbide Through Drill 31.5mm Cutting Length 90mm Overall, 16mm Shank - Teknik Makina
Take advantage of a compact, compatible drilling solution that pairs a precise 14 mm cutting diameter with a 31.5 mm cutting length for consistent hole quality; its 16 mm shank and 45 mm clamping length ensure secure seating in standard holders. Order directly via Metav Werkzeuge or consult the team for application advice and supply from Emmerich. Indexable drill U034TM (Teknik Makina) — 14 mm, 16 mm shank A robust Indexable drill U034TM for precision holemaking in machining applications, designed to accept Korloy insert type QC-- 070304 and to integrate with common 16 mm holders for reliable production use 14 mm diameter for precise holes Optimised for Korloy QC-- 070304 inserts 16 mm shank for secure clamping 31.5 mm cutting length for deeper drilling Reliable hole quality for repetitive production Built for consistent performance, this indexable drill delivers repeatable hole diameters via its 14 mm nominal size and controlled cutting length. The tool’s geometry and rigid construction reduce runout and variation, allowing shops to maintain tighter tolerances across batches. With a measured 31.5 mm cutting length, the tool supports applications that require deeper engagement than standard short drills, while still preserving chip evacuation and hole finish. The result is reduced rework and improved throughput for routine drilling tasks. Insert compatibility that simplifies logistics and tool management The drilling head is configured to accept Korloy inserts, specifically QC-- 070304, which simplifies stock control and replacement intervals. Using standardised indexable inserts means faster changeovers and consistent cutting performance without regrinding solid tools. Compatibility with established insert systems also supports cost-efficient maintenance: replacement is limited to the insert rather than the whole body, improving uptime and lowering long-term operating costs for production environments. Secure clamping and ergonomic handling in the toolholder Designed with a 16 mm shank and 45 mm clamping length, the tool offers strong seating in conventional holders, reducing vibration and minimising positional shift under load. The compact overall design balances rigidity with accessibility in confined set-ups, while a lightweight construction (approx. 0.111 kg) makes handling and tool changes straightforward on busy shop floors. These attributes contribute to steady cutting conditions and prolong insert life through reduced chatter. Practical dimensions for workshop integration and set-up With an overall length of 90 mm and a focused cutting zone, the tool integrates easily into common drill tool chains and modular systems. The combination of compact length and specific cutting capacity supports both single-station and multi-station machining operations. The geometry is chosen to optimise chip flow for the designated insert type, helping to avoid clogging and maintain surface quality without requiring complex coolant setups or process adaptations. Contact Metav Werkzeuge to review application details and secure reliable supply of Teknik Cutting Tools’ indexable drill U034TM from Emmerich for immediate workshop integration Technical data Article number: U034TM Manufacturer: Teknik Makina Type: Indexable drill ECLASS: 21180201 Core technical figures Diameter: 14 mm Cutting length: 31.5 mm Overall length: 90 mm Shank diameter: 16 mm Shank clamping length: 45 mm Weight: 0.111 kg Design and special features Insert designation: QC-- 070304 Compatible with Korloy inserts Compact overall length for machine integration Lightweight tool body for easier handling SKU: U034TM FAQ What insert type fits this indexable drill? The indexable drill is designed for Korloy inserts, specifically the QC-- 070304 designation, providing standardised replacement and consistent cutting performance. What are the key dimensions to check for holder compatibility? Verify a 16 mm shank diameter and a 45 mm shank clamping length to ensure secure seating in standard toolholders for this drill. Is the tool suitable for deeper holes in series production? Yes, the tool’s 31.5 mm cutting length and rigid design support repetitive deeper drilling while maintaining dimensional accuracy. Which SKU should be referenced when ordering or enquiring? Reference SKU U034TM when requesting availability, technical details, or replacement inserts for this indexable drill. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Drill 42mm Cutting Length 50mm Shank Length 110mm Overall Length, SPMG 0502 Compatible - Teknik Makina
Take advantage of the combination of precise cutting geometry, a compact 20 mm shank for secure clamping and a 42 mm cutting length designed for dependable holemaking; order the Teknik Makina tool directly via Metav Werkzeuge or consult the Metav team for application matching. Indexable drill U814TM — Ø14 mm indexable drilling solution with 20 mm shank (Teknik Makina) A robust indexable drill U814TM engineered for precision holemaking in production and jobbing environments, offering a compact overall length and an indexable insert system for fast tool changes Precision Ø14 mm cutting diameter 20 mm shank for secure clamping 42 mm effective cutting length Consistent hole quality and predictable cycle times The U814TM is designed to deliver repeatable hole tolerances through a controlled cutting geometry and an indexable insert concept. With an actual cutting diameter of Ø14 mm and an effective cutting length of 42 mm, the tool is dimensioned for medium-depth drilling tasks where consistency matters. The limited overall length of 110 mm reduces overhang, which in turn lowers bending forces and improves roundness. This results in fewer rejects and a more stable machining process, which can be quantified during production planning and aids throughput optimisation. The light tool weight (0.17 kg) helps maintain spindle balance and reduces dynamic load during high-volume runs. Minimise downtime with a compatible insert system Changeovers are simplified by the use of standard indexable inserts: the drill accepts SPMG 0502 inserts and is compatible with inserts from Taegutec and YG-1, which are widely available. This standardisation ensures rapid replacement of cutting edges and access to a range of grades for different materials. The ability to source inserts from multiple reputable suppliers reduces lead times and inventory risk. Tool life is extended by replacing only the worn insert rather than the entire body, offering cost-efficiency across production batches. If data sheets or insert grade recommendations are needed for specific workpiece materials, technical advice can be provided by Metav Werkzeuge. Secure clamping and straightforward toolholder integration Designed for use with a 20 mm shank, the drill integrates with standard toolholders and shrinking or hydraulic chucks that accept this diameter. The shank engagement length of 50 mm provides a positive seating length for secure fixation, while the compact overall length supports stiffer setups and improved surface finish. These mechanical attributes make the tool suitable for CNC lathes and milling machines where reliable clamping and minimal run-out are essential. The indexable head arrangement also reduces set-up complexity: once the arbor and holder are aligned, insert replacement and minor adjustments are quick and reproducible, saving set-up time in batch production. Discuss suitability for the Teknik Makina U814TM with Metav Werkzeuge to match insert grade and holder type for the intended application — contact Metav Werkzeuge via info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request specification support Technical Data Article number: U814TM Manufacturer: Teknik Makina Product type: Indexable drill Facts Diameter: 14 mm Overall length: 110 mm Cutting length: 42 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.17 kg Special features Compatible inserts: SPMG 0502 Compatible with Taegutec and YG-1 inserts Indexable insert system for fast edge changes FAQ What insert type does this drill use? The drill uses SPMG 0502 indexable inserts; replacements from Taegutec and YG‑1 are suitable for the U814TM. Which shank size is required for mounting? A 20 mm shank holder is required; the U814TM has a 20 mm shank diameter with a 50 mm engagement length. What is the maximum drilling depth this tool is designed for? The tool provides an effective cutting length of 42 mm, with an overall length of 110 mm, suitable for medium-depth holemaking. Can the insert grades be varied for different materials? Yes, the indexable system accepted by the U814TM allows selection of different insert grades from compatible suppliers to suit various workpiece materials. Is the tool balanced for high-speed rotation? The U814TM’s compact design and low mass (0.17 kg) contribute to reduced overhang and better dynamic behaviour; specific balancing data should be verified for very high spindle speeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Drill 42mm Cutting Length 50mm Shank Length, 114mm Overall Length - Teknik Makina
Take advantage of a compact, high-rigidity drilling solution that combines 14 mm diameter precision with a 42 mm cutting length for reliable production performance; order or request technical advice directly via Metav Werkzeuge. Teknik Makina U302TM Indexable Drill Body — 14 mm diameter, 42 mm cutting length The U302TM indexable drill body is a purpose-built drilling component for CNC machining centres and production drills, designed to accept Taegutec SOMT 0502 indexable inserts for efficient, repeatable holemaking. 14 mm diameter for medium holes Compatible with Taegutec SOMT 0502 inserts 42 mm cutting length for deeper drilling 20 mm cylindrical shank for stable clamping Consistent hole quality through focused geometry and rigidity The indexable drill body achieves stable cutting performance thanks to its rigid 20 mm shank and optimised geometry. The combination of a 14 mm diameter and 42 mm cutting length provides a predictable chip evacuation path and reduces runout, which in turn delivers more consistent hole tolerances in serial production. Engineers benefit from a repeatable drilling cycle and reduced scrap rates when the holder is clamped in standard toolholders on CNC machining centres. Reduced downtime with indexable insert compatibility Compatibility with Taegutec SOMT 0502 inserts makes the holder an economical choice for workshops and production lines: inserts can be changed quickly without replacing the body, lowering inventory cost for spare parts and shortening machine downtime. The design supports straightforward insert seating and secure clamping, allowing process planners to maintain cutting performance without elaborate regrinding procedures — a practical advantage for environments that prioritise throughput and maintainability. Practical handling, clear specification and trusted supply chain The drilling component is lightweight at 0.165 kg, facilitating tool handling and fast magazine changes during tool swaps. With an overall length of 114 mm and a shank length of 50 mm, the body fits common toolholders while keeping overhang to a minimum, which helps reduce vibration and extend insert life. Sourced through Metav Werkzeuge, the product is supplied from a European quality filter that supports reliable delivery and technical competence for industry and trade. Contact Metav Werkzeuge for specification matching and supply from Emmerich — telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: U302TM Name: Indexable drill body (Vollbohrer) Manufacturer: Teknik Makina Data Diameter: 14 mm Overall length: 114 mm Cutting length: 42 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.165 kg eCl@ss: 21180201 Special features For indexable inserts: SOMT 0502 Compatible insert manufacturer: Taegutec Files: 62de7ec1bd24461b3d5f7a4e, 62de7dd60f56dbb4de4dbedb FAQ What insert type is recommended for this drill body? The drill body is designed for Taegutec SOMT 0502 indexable inserts; using the specified insert type ensures correct seating and predictable cutting geometry. Can the holder be used in standard toolholders on CNC machining centres? Yes, the body’s 20 mm shank and 50 mm shank length are suitable for common toolholders used in production CNC machining centres, providing stable clamping and reduced runout. How deep can this tool drill reliably? With a 42 mm cutting length and an overall length of 114 mm, the body supports deeper drilling within the specified cutting length; tool life and hole quality depend on machining parameters and insert condition. Is the drill body lightweight for fast tool changes? At 0.165 kg, the component is light enough to simplify handling during tool magazine changes and manual preparation, contributing to shorter changeover times. What is the article number for ordering or reference? The article number for ordering and reference is U302TM from Teknik Makina, as listed in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Drill 56mm Cutting Length 50mm Shank Length 128mm Overall Length - Teknik Makina
Take advantage of a robust indexable‑insert design with a 14 mm diameter, 56 mm cutting length and a rigid 20 mm shank for stable, long‑running performance; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. U402TM Solid Drill by Teknik Makina – 14 mm, fits Taegutec SOMT 0502 inserts The U402TM solid drill is an indexable‑insert drilling solution designed for precision metalworking applications, combining a compact overall length with repeatable performance when used with Taegutec SOMT 0502 inserts 14 mm diameter for standard holemaking 56 mm cutting length for deeper drilling 20 mm shank for secure clamping Compatible with Taegutec SOMT 0502 inserts Stable indexable‑insert drilling for production use The U402TM is configured as an indexable‑insert drill that accepts Taegutec SOMT 0502 cutting plates, enabling swift insert changes without re‑setting the holder. This arrangement supports predictable cycle times in production and reduces the need for full tool replacement. The design focuses on repeatability and straightforward maintenance, which matters where uptime and process reliability are priorities. Consistent hole quality through measured cutting reach With a 56 mm cutting length and a 14 mm diameter, the tool provides a defined cutting envelope that helps maintain concentricity and depth control across runs. A consistent cut length minimises the number of passes required for deeper holes and supports uniform chip evacuation when paired with an appropriate coolant strategy, contributing to improved surface finish and dimensional stability. Secure clamping and reduced vibration for accurate results A 20 mm shank and 50 mm engagement length deliver the axial rigidity necessary for steady drilling, while the overall length of 128 mm balances reach with stiffness. The compact mass (approx. 0.17 kg) helps reduce dynamic load on the spindle, which is beneficial when aiming for tight tolerances or when operating at medium spindle speeds on modern machining centres. Lower lifetime costs through replaceable inserts Using Taegutec SOMT 0502 inserts means the cutting edge can be renewed rapidly on the shop floor, cutting downtime and consumable expenses versus solid‑carbide regrind cycles. The indexable system is designed to offer long service life for the holder assembly and straightforward insert indexing, which together improve total tool economy in repetitive drilling tasks. Practical supply and workshop readiness The U402TM is supplied with clear technical references and is suitable for inclusion in standard tooling assortments. Availability from stock and a concise specification sheet simplify procurement and planning for maintenance cycles. For shops looking to consolidate suppliers, the tool’s compatibility with established Taegutec inserts makes integration into existing tooling inventories easy. Documentation and product files for process planning Technical documentation is provided to support machine setup and tool management; product documents are indexed for planning and traceability (files: 62de7ec1148ec6b71020ffa3, 62de7dd50aced56449540e80). These resources assist workshop managers and planners in verifying tool geometry and ensuring a controlled introduction into production. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina U402TM solid drill compatible with Taegutec SOMT 0502 inserts and to arrange prompt supply from our Emmerich warehouse Technical data SKU: U402TM Manufacturer: Teknik Makina Type: Solid drill (indexable‑insert holder) Compatible inserts: Taegutec SOMT 0502 Core data Diameter: 14 mm Overall length: 128 mm Cutting length: 56 mm Shank diameter: 20 mm Shank engagement length: 50 mm Weight: 0.17 kg Special features Indexable‑insert concept for quick edge changes Suited to precision metalworking tasks Technical files available (see file IDs above) FAQ Which insert type fits this drill? The U402TM accepts Taegutec SOMT 0502 indexable inserts; the holder geometry is made for that plate size and clamp arrangement. What are the critical dimensions for machine setup? Key setup values are the 20 mm shank diameter, 50 mm shank engagement length and the 128 mm overall tool length for correct projection and clamping. Is the holder suitable for automated tool changing? The solid drill is compatible with standard toolholders and ATC systems provided the machine’s spindle and clamping interface match the toolholder chosen for the 20 mm shank. How does the insert system affect workshop costs? By using replaceable SOMT 0502 inserts, the U402TM reduces the frequency of full‑tool replacements and lowers consumable costs through simple insert indexing. Are technical drawings available for CAM programmers? Yes, technical files linked to the product (file IDs provided) contain the geometry and specification details needed for CAM and process documentation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Drill for XC-- 070304 Indexable Inserts 31.5mm Cutting Length, 45mm Shank - Teknik Makina
Take advantage of a compact, service-friendly drill body that combines precise indexing with fast insert changes and stable clamping for uninterrupted machining. The compatibility with XC-- 070304 indexable inserts and the compact 77 mm overall length make this tool a practical choice for production cells—order the drill body directly via Metav Werkzeuge or ask our consultants for tailored advice. U047TM — 14 mm indexable insert drill body (L 77 mm) by Teknik Makina U047TM is a short, indexable insert drill body designed for precise holemaking in modern CNC applications, compatible with XC-- 070304 indexable inserts from ISCAR. 14 mm nominal diameter Compatible with XC-- 070304 inserts 45 mm shank length Secure Torx M2.5 fixing Increased productivity through indexable inserts and compact design The indexable insert drill body is engineered to reduce machine downtime by allowing fast insert swaps instead of full-tool replacement. With a 14 mm nominal diameter and a cutting length of 31.5 mm, the tool supports typical through-hole and short-flood drilling operations while keeping tool-change cycles brief. The compatibility with XC-- 070304 inserts by ISCAR simplifies inventory management where the same insert family is already used, lowering stocking complexity and enabling quick adaptation across batch runs. The compact overall length of 77 mm helps in applications with restricted tool holders or shorter tool projection, improving rigidity and cutting stability. Secure clamping and straightforward maintenance for reliable results A 45 mm shank length provides a stable clamping interface for most standard toolholders, contributing to consistent concentricity and repeatable hole quality. Fast and secure insert fastening is achieved via the M2.5 x 5.5 fixing screw operated with a T8 Torx key, allowing controlled torque application and repeatable seating of the insert pocket. The body’s modest weight of 0.111 kg reduces rotating mass and supports smoother spindle behaviour at operational speeds. Maintenance routines are simplified: replacement of the insert and screw is rapid and requires only standard workshop tools, which reduces non-productive time and helps maintain throughput. Practical fit for production workshops and toolroom consolidation Designed for integration into industrial drilling programmes, the tool body supports consistent holemaking when paired with the correct indexable inserts. The compatibility with a widely used insert designation encourages tool standardisation across machines and workstations, aiding procurement and lowering the number of separate cutting tools required. Whether implemented in single-machine setups or multi-spindle cells, the body’s balanced dimensions and insert system enable predictable tool life and easier process qualification. The U047TM from Teknik Makina is therefore suited to operations seeking a pragmatic balance between flexibility, serviceability and machining reliability. For practical advice on integrating this Teknik Makina indexable insert drill body into an existing toolset or to secure stock from Metav Werkzeuge in Emmerich, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: U047TM Product type: Indexable insert drill body Brand: Teknik Makina Compatible inserts: XC-- 070304 (ISCAR) Dimensions & core data Diameter: 14 mm Overall length: 77 mm Shank length: 45 mm Cutting length: 31.5 mm Weight: 0.111 kg Assembly & fixing Fixing screw: M2.5 x 5.5 Torx key: T8 Designed for: XC-- 070304 indexable inserts Suitable insert manufacturer: ISCAR FAQ What insert family fits this drill body? The drill body accepts XC-- 070304 indexable inserts; the designation refers to the compatible insert geometry and pocket form. Which manufacturer’s inserts are recommended for best fit? The body is specified to be compatible with inserts from ISCAR, ensuring correct seat and repeatability when ISCAR XC-- 070304 inserts are used. What are the key dimensions that affect clamping and projection? Important dimensions are the 14 mm diameter, 45 mm shank length and 77 mm overall length; these determine holder compatibility and stiffness in the machining setup. How is the insert secured and which tool is required? Inserts are fixed with a M2.5 x 5.5 screw tightened with a T8 Torx key for reliable seating and repeatable torque values. Is this tool suitable for constrained setups with short tool projection? Yes; the compact overall length of 77 mm and short projection characteristics make the body suitable for operations with limited clearance or lower overhang requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Drill for XC-- 070304 Indexable Inserts 31.5mm Cutting Length, 45mm Shank - Teknik Makina
Take advantage of a compact, indexable solution that combines precise 14 mm drilling, a 31.5 mm cutting length and straightforward insert changes for shorter setups; order directly via Metav Werkzeuge or contact our consultants for specification support. Solid drill U063TM — 14 mm, for XC-- 070304 indexable inserts (Teknik Cutting Tools) Solid drill U063TM is an indexable-insert drill designed for accurate, short-reach holemaking in general metalworking, engineered for use with XC-- 070304 inserts and compatible with Ceratizit systems 14 mm drill diameter for precise holemaking 77 mm overall length for short-reach operations Compatible with Ceratizit XC-- 070304 inserts Torx T8 screw system with M2.5x5.5 fixing Efficient indexable drilling for stable production The solid drill is engineered to deliver consistent hole quality through a combination of defined geometry and a compact overall length. With a 14 mm diameter and 31.5 mm cutting length, the tool provides a balance between rigidity and chip evacuation; this reduces vibration and improves bore roundness in common workshop steels. The use of indexable inserts means cutting edges are replaced rather than resharpened, lowering tool-room downtime and providing a predictable life-cycle cost per hole. Modularity that reduces downtime and simplifies tooling Designed for modular tool systems, the shank and fixing details support quick insert changes and reliable clamping. The 45 mm shank length ensures secure clamping in standard tool holders, while the Torx T8 drive and M2.5x5.5 screw allow fast, repeatable insert replacement. Compatibility with XC-- 070304 inserts from Ceratizit enables access to a range of grades for different materials, so the same holder can be adapted for steel, aluminium or other alloys without replacing the body. Robust handling and benefits for workshop efficiency A compact overall length of 77 mm and a mass suited to handheld handling make the tool practical for both bench and CNC applications where short-reach drilling is required. The modular concept reduces overall tooling inventory by separating the wear component—the insert—from the tool body, which supports cost-effective maintenance. Supplied by Teknik Cutting Tools, the item is intended for industrial environments where repeatability and straightforward maintenance are priorities. Contact Metav Werkzeuge for tailored application advice on the U063TM solid drill and arrange procurement from our Emmerich stock by emailing info@metav-werkzeuge.com or calling +49 2822 7131930 Technical Data Article number: U063TM Label: 14mm Vollbohrer XC-- 070304 L77mm Description: for XC-- 070304 Indexable Inserts EClass: 21180201 Facts Diameter: 14 mm Overall length: 77 mm Cutting length: 31.5 mm Shank length: 45 mm Shank diameter: 16 mm Weight: 0.111 kg Special features For indexable inserts: XC-- 070304 Compatible insert manufacturer: Ceratizit Torx key: T8 Torx screw: M2.5x5.5 SKU: U063TM Manufacturer indicated: Teknik Makina FAQ What insert type does this drill use? The tool is specified for XC-- 070304 inserts, enabling rapid replacement of cutting edges without body changes. Which screw and key are required for insert clamping? Insert clamping uses an M2.5x5.5 Torx screw tightened with a T8 Torx key. Is the shank suitable for standard holders? The 45 mm shank length and 16 mm shank diameter are intended for conventional clamping in standard tool holders. What benefits do indexable inserts offer compared with solid carbide drills? Indexable inserts allow economical edge replacement, consistent hole quality and reduced downtime since the body remains in service while inserts are swapped. Who manufactures this drill and what is the SKU? The drill is supplied under SKU U063TM and is associated with Teknik Makina / Teknik Cutting Tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Drill for XC-- 070304 Indexable Inserts L77mm, 45mm Shank, 31.5mm Cutting Length - Teknik Makina
Take advantage of a tool that combines precise dimensions with rapid insert changes: the 14 mm diameter and 31.5 mm cutting length deliver stable hole quality, while compatibility with XC-- 070304 indexable inserts keeps downtime low — order or request advice via Metav Werkzeuge for supply and consultation. Solid drill (Vollbohrer) — 14 mm, for XC-- 070304 indexable inserts, L77 mm A solid drill designed for secure insert clamping and efficient holemaking in industrial machining applications 14 mm diameter for standard bore sizes Compatible with XC-- 070304 indexable inserts Overall length 77 mm for depth reach Torx T8 screw M2.5x5.5 for secure fixing Faster cycle times through insert-based holemaking The combination of a 14 mm tool diameter and an insert system tailored to XC-- 070304 means shorter tool-change intervals and predictable performance across batches. Using indexable inserts preserves cutting geometry without regrinding; a worn edge is replaced in seconds rather than hours. For production environments this translates directly into higher machine uptime and a clear improvement in process efficiency, with the capital tied up in tooling reduced through lower maintenance overhead. Secure clamping and reliable machining outcomes A 45 mm shank engagement provides reliable clamping in standard tool holders, while the 77 mm overall length ensures adequate reach for many common drilling setups. The 31.5 mm cutting length gives sufficient engagement for through or shallow blind holes, maintaining chip control and surface quality. These dimensional specifications support consistent centring and repeatability, so repeat runs show minimal scatter in hole diameter and form — an important aspect for precision assemblies. Simple insert replacement and low-maintenance upkeep Changeovers are facilitated by the Torx T8 fastening system and the M2.5x5.5 screw specification, making spare parts and service procedures straightforward to standardise on the shop floor. Compatibility with Taegutec-type inserts broadens supplier choice and shortens procurement times. The tool’s compact mass and clear mechanical interfaces mean maintenance routines are quick to perform, reducing indirect labour and helping to maintain steady production throughput. Practical fit for workshops and production lines This tool suits toolrooms, job shops and industrial cells that require an insert-driven drilling solution rather than brazed or regrindable tooling. The design supports modular replacement strategies and integrates easily into existing holder systems. For teams seeking an efficient holemaking option with predictable life cycles and easy logistics, this variant offers a pragmatic balance between performance and serviceability. For further measurements or application advice, technical support is available. For detailed compatibility checks and reliable supply from Emmerich, contact Metav Werkzeuge to discuss the Teknik Makina 14 mm solid drill and ensure the correct insert stock is chosen for the application. Technical Data SKU: U21TM Manufacturer: Teknik Makina ECLASS: 21180201 Core data Diameter: 14 mm Overall length: 77 mm Cutting length: 31.5 mm Shank length: 45 mm Holder diameter (aufnahme): 16 mm Weight: 0.111 kg Torx key: T8 Torx screw: M2.5x5.5 Features Compatible with XC-- 070304 indexable inserts Compatible inserts manufacturer: Taegutec Product type: solid drill (Vollbohrer) Label: 14mm solid drill for XC-- 070304 L77mm SKU label: U21TM FAQ Which insert type fits this tool? The solid drill accepts XC-- 070304 indexable inserts; inserts from Taegutec are compatible with the clamping geometry. What are the key dimensions to check for holder selection? Check the 14 mm diameter, 77 mm overall length and 45 mm shank length to ensure correct clamping and reach for the intended holder. How long is the cutting engagement and what does it mean in practice? The 31.5 mm cutting length denotes the maximum usable flute length into the workpiece; it is sized for common blind and through-hole tasks and supports stable chip evacuation. Which fastening tool is required for insert changes? Insert clamping uses a Torx T8 key and an M2.5x5.5 screw for secure fixing and quick replacement cycles. Is this tool suitable for continuous production runs? Yes; the insert system and robust clamping make it appropriate for repetitive operations where rapid insert replacement and predictable tool life reduce overall cycle costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Solid Drilling Tool 56mm Cutting Length, 50mm Shank Length - Teknik Makina
The combination of a compact 14 mm diameter and a 56 mm cutting length delivers high productivity for medium-depth holemaking while the 20 mm shank ensures stable clamping in standard toolholders; order the tool directly via Metav Werkzeuge or consult the technical team for specification matching U714TM indexable insert drill — 14 mm Ø, 56 mm cutting length (Teknik Makina) U714TM is an indexable insert drill engineered for consistent, high‑throughput holemaking in production and CNC environments 14 mm cutting diameter 56 mm effective cutting length 20 mm shank for secure clamping Compatible with SPMG 0502 inserts Suited to Taegutec and YG-1 inserts Increased throughput from fewer passes The compact design of this indexable insert drill combines a 14 mm diameter with a 56 mm cutting length to allow deeper holes per plunge while maintaining process stability. The geometry enables single‑pass operations in many common setups, reducing cycle times and minimising tool changes. For production lines where every second counts, the tool’s configuration translates into measurable improvements in machining efficiency and a lower cost per hole without compromising finish quality. Stability and repeatability under spindle load A 20 mm shank diameter and a 50 mm shank length give the tool reliable seating in conventional holders, which improves concentricity and reduces runout. The modest mass of 0.18 kg lowers rotational inertia for quicker acceleration and deceleration in automated cycles, helping to maintain consistent hole geometry across batches. Where repeatability is critical, these characteristics support dependable results and minimise scrap rates in repetitive machining tasks. Insert compatibility for economical reconditioning Designed for use with SPMG 0502 indexable inserts, the drill accepts widely available grades from manufacturers such as Taegutec and YG‑1, simplifying stockkeeping and promoting economical regrinding or replacement. The indexable concept separates the cutting edge from the body, so worn inserts can be exchanged rapidly while retaining the same drill body—reducing downtime and keeping spindle utilisation high. Supplied via Metav Werkzeuge’s distribution in Emmerich, the product benefits from an established quality filter and reliable logistics for the European market. Contact Metav Werkzeuge for precise application advice on the Teknik Makina U714TM indexable insert drill and to confirm suitability for specific machines; reach the team at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: U714TM Manufacturer: Teknik Makina ECLASS: 21180201 Product name: Vollbohrer (indexable insert drill) Core dimensions Diameter: 14 mm Overall length: 124 mm Cutting length: 56 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.18 kg Features & compatibility Compatible inserts: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 SKU: U714TM Documentation: 2 files available FAQ What insert type does the drill use? The U714TM indexable insert drill accepts SPMG 0502 inserts; compatible grades from Taegutec and YG‑1 are suitable for standard applications. Is the shank suitable for standard holders? Yes — the tool features a 20 mm shank diameter with a 50 mm shank length designed for secure seating in common toolholders and collet systems. What hole depth is achievable in a single pass? The tool’s 56 mm effective cutting length supports medium‑depth holes per pass; actual single‑pass performance depends on material, insert grade and machine rigidity. Does the drill come with inserts fitted? Documentation indicates the body is for SPMG 0502 inserts; inserts are typically stocked separately and should be selected according to workpiece material and cutting conditions. How does the drill reduce downtime? By using indexable inserts, worn cutting edges are replaced quickly without removing the drill body, which reduces tool‑change time and keeps spindle uptime high. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
15.5mm Solid Carbide Boring Bar 45mm Cutting Length, 50mm Shank Length - Teknik Makina
Take advantage of precise, repeatable holemaking with a compact indexable design and proven insert compatibility; the robust shank and defined cutting length ensure consistent performance in serial production. Order the tool directly via Metav Werkzeuge or consult the technical team for integration advice. Teknik Makina indexable drill U305TM — 15.5 mm, for SOMT 0502 inserts The indexable drill U305TM is an insert drill optimised for medium-depth holemaking, offering a balance of reach and rigidity for production environments where fast insert changes and stable machining are required 15.5 mm diameter for medium holes Compatible with SOMT 0502 inserts (Taegutec) 20 mm cylindrical shank for secure clamping 45 mm cutting length for stable chip control Consistent machining where repeatability matters The U305TM is engineered as an indexable drill that puts repeatability at the forefront. With a defined 15.5 mm cutting diameter and 45 mm cutting length, the tool delivers predictable contact conditions that reduce variation between holes. The use of indexable inserts means cutting geometry can be restored quickly by inserting a fresh SOMT 0502 insert from Taegutec, preserving hole quality over longer production runs. This supports lean workflows by shortening maintenance intervals and maintaining consistent tolerances. Faster tool service and predictable operating costs By accepting a standard insert type, the design simplifies inventory and service routines: cutting edges are renewed rather than the whole tool being replaced. The compatibility with SOMT 0502 inserts allows straightforward sourcing of replacement tips and makes changeovers fast. The result is lower downtime and clearer cost planning for repetitive drilling tasks, while the indexable concept keeps the cutting geometry consistent without specialist regrinding equipment. Rigidity and secure clamping for stable results A 20 mm cylindrical shank and 50 mm shank length provide a solid clamping interface, reducing runout and increasing radial stiffness compared with undersized holders. The tool’s 117 mm overall length gives adequate reach for many setups while keeping overhang moderate to limit vibration. At approximately 0.175 kg, it is light enough to be handled easily yet engineered to support stable cutting when properly mounted in a compatible holder — a decisive factor for achieving repeatable roundness and surface finish. Practical dimensions for workshop integration The compact geometry of this insert drill suits typical toolholders and machine setups used in series production. With the combination of standard insert form and clearly defined lengths, the tool is simple to specify in CAM and tool lists. The modular nature of the indexable system also allows workshop planners to align spare inserts, toolholders and clamping systems efficiently, helping to streamline procurement and reduce the number of distinct tools kept in stock. Contact Metav Werkzeuge for detailed integration advice on the Teknik Cutting Tools indexable drill U305TM, technical compatibility with Taegutec SOMT 0502 inserts and to arrange supply — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: U305TM Designation: Indexable drill Manufacturer: Teknik Makina Compatible inserts: SOMT 0502 (Taegutec) Diameter: 15.5 mm Cutting length: 45 mm Shank diameter: 20 mm Shank length: 50 mm Overall length: 117 mm Weight: 0.175 kg Facts Diameter: 15.5 mm Cutting length: 45 mm Shank: 20 mm × 50 mm Overall length: 117 mm Mass: 0.175 kg Special features Indexable insert concept Compatible with Taegutec SOMT 0502 Compact overall length for moderate reach Stable cylindrical shank for reduced runout FAQ Which insert type fits this tool? The indexable drill U305TM accepts SOMT 0502 style inserts; the tool is specified for that insert form and is compatible with Taegutec-manufactured inserts of the same designation. What are the key dimensions to consider when setting up the tool? Important dimensions for the U305TM are 15.5 mm diameter, 45 mm cutting length, 20 mm shank diameter with 50 mm shank length, and an overall length of 117 mm. How does the shank size affect clamping? A 20 mm cylindrical shank provides a secure interface in standard holders; the shank diameter and length contribute to rigidity and reduced runout during drilling. Is this tool suitable for long-reach drilling? The U305TM has a moderate overall length of 117 mm; it is designed for medium-depth applications where a balance between reach and stiffness is required. What advantage does an indexable design offer compared with solid tools? Indexable designs allow rapid replacement of cutting edges, restoring geometry without replacing the whole tool. This supports reduced downtime and consistent hole quality across production batches. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.5mm Solid Drill With 45mm Cutting Length, 50mm Shank Length, 20mm Shank Diameter - Teknik Makina
Leverage a robust indexable drilling system that combines repeatable hole quality with short changeover times; the result is a more efficient machining process and lower tooling costs per hole. Benefit from a stable 20 mm shank and a 45 mm cutting length designed to keep cycles consistent. Order the drill directly via Metav Werkzeuge or request tailored advice for insert choices and clamping solutions. Indexable Insert Drill U815-1TM by Teknik Makina — 15.5 mm, 45 mm cutting length An indexable insert drill engineered for medium-depth holes and fast insert changes, ideal for production environments that require stable clamping and consistent repeatability 15.5 mm diameter for precise holes 45 mm cutting length for medium-depth drilling 20 mm shank diameter for secure clamping Compatible with SPMG 0502 indexable inserts Reliable hole quality and process stability The U815-1TM is built to deliver repeatable hole diameters and straightness over long runs. The combination of a 15.5 mm nominal diameter, a 45 mm cutting length and a rigid 20 mm shank reduces deflection and vibration during machining, which translates into fewer rejects and less rework. For workshop planners this means predictable cycle times and easier tool life forecasting. The tool’s overall length of 114 mm and compact mass also help keep toolholder moments low, supporting consistent machining when used in appropriate holders. Faster maintenance and lower operating cost per hole Designed around the SPMG 0502 insert system, the drill provides quick indexable insert changes and the option to fit inserts from established manufacturers such as Taegutec and YG-1, reducing downtime. The indexable approach shifts the economic balance from replacing whole drills to swapping small inserts, improving lifetime value and simplifying inventory: only a small stock of inserts and a single drill body are required to cover many jobs. The tool’s moderate cutting length makes it especially suited to medium-depth operations where efficient chip evacuation and predictable insert wear are priorities. Practical handling, clamping and integration in the shop Attention to the interface between spindle and tool makes the U815-1TM straightforward to integrate: the 20 mm shank ensures stable clamping in common holders and collets, while the 50 mm shank length provides secure engagement. At 0.175 kg the tool is light enough to reduce load on tool changers yet substantial enough to resist chatter in typical milling and drilling centres. Workshop managers will appreciate the uncomplicated logistics — one tool body, standard SPMG 0502 inserts and compatible options from Taegutec or YG-1 — which supports lean tooling strategies and fewer SKUs to manage. Contact Metav Werkzeuge for support with application data, insert selection and toolholder recommendations for the Teknik Cutting Tools indexable insert drill U815-1TM, supplied from Emmerich for secure and reliable delivery Technical data Article number: U815-1TM Manufacturer: Teknik Makina Data Diameter: 15.5 mm Overall length: 114 mm Cutting length: 45 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.175 kg Special features Insert type: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 FAQ Which insert type does the drill use? The drill uses SPMG 0502 indexable inserts; inserts from Taegutec and YG-1 are compatible with the U815-1TM and simplify replacement cycles. What clamping size is required? A 20 mm shank diameter is specified; the 50 mm shank engagement supports secure clamping in standard collets and holders. Is the tool suitable for deep-hole drilling? The tool is optimised for medium-depth applications with a 45 mm cutting length; for deeper holes longer specialised systems are recommended. How does the indexable system affect running costs? Using indexable inserts reduces the cost per hole because only the small insert is replaced when worn, rather than the complete drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Solid Carbide Boring Bar 69mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of the combination of reliable indexable-insert compatibility, a Ø 23 mm cutting diameter and a robust 25 mm shank for stable, repeatable holemaking. Order or request application advice from Metav Werkzeuge if needed. Teknik Makina indexable insert drill U823TM — Ø 23 mm, compatible with SPMG 07T3 inserts Teknik Makina indexable insert drill U823TM designed for medium-depth production drilling where quick insert changes and predictable process behaviour are required Compatible with SPMG 07T3 inserts for fast regrind cycles and low downtime Ø 23 mm cutting diameter for general production tasks 25 mm shank with 56 mm clamping length for rigid mounting Cutting length 69 mm and overall length 150 mm for medium-depth holes Predictable holemaking through an indexable insert system The U823TM is delivered as an indexable insert drill system that accepts SPMG 07T3 cutting inserts, enabling quick edge changes and consistent cutting geometry across batches. Compatibility with established insert suppliers Taegutec and YG-1 reduces procurement risk and simplifies tool inventory. By using indexed inserts rather than solid tools, machining cycles benefit from reproducible cutting edges and straightforward maintenance: worn inserts are replaced instead of regrinding an entire tool, which shortens machine downtime and lowers long-term operating costs. This approach supports a stable, measurable production output and helps maintain repeatable hole tolerances in series manufacture. Rigid shank and accurate clamping for reduced runout A substantial 25 mm shank with a 56 mm clamping length provides the stiffness required for stable drilling at the stated diameter, reducing deflection and improving hole quality. The tool’s mass of 0.407 kg contributes to vibration damping in many toolholder setups, while the defined clamping length helps ensure consistent insertion depth and concentricity. These mechanical attributes translate into more reliable process data and fewer scrapped parts when the holder and machine spindle are correctly matched. For users assessing fixture choices, the clear shank specification allows straightforward selection of collets or chucks that meet the rigidity demands of regular production. Efficient geometry for medium-depth drilling operations With a cutting length of 69 mm and an overall length of 150 mm, the drill is optimised for medium-depth holes where chip control, access and stability must be balanced. The 23 mm cutting diameter supports a wide range of common production tasks, offering an efficient compromise between material removal rate and tool life when inserts are maintained and replaced on schedule. The replaceable-edge concept provides consistent edge geometry across inserts, which simplifies process tuning: once feed and speed are set for the insert geometry, repeat runs produce comparable results without lengthy requalification. Practical suitability and procurement confidence This indexable insert cutter is suited to workshops and production lines that favour fast serviceability and predictable cycle times. Compatibility with major insert brands reduces lead times for spare cutting edges and supports uninterrupted shifts. Metav’s role as a precision partner and distributor gives additional assurance: the company maintains a broad product range and established logistics for European customers, which helps to keep tool availability reliable and procurement straightforward. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Teknik Makina U823TM; reach the Emmerich team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: U823TM Manufacturer: Teknik Makina Facts Diameter: 23 mm Overall length: 150 mm Cutting length: 69 mm Shank diameter: 25 mm Shank clamping length: 56 mm Weight: 0.407 kg Special features Compatible with inserts from Taegutec and YG-1 Insert type: SPMG 07T3 Indexable insert drill design FAQ What insert type does this drill use? The Teknik Makina indexable insert drill U823TM uses SPMG 07T3 inserts and is compatible with inserts from Taegutec and YG-1. What are the key dimensions for mounting? Diameter 23 mm, shank 25 mm, clamping length 56 mm, cutting length 69 mm, overall length 150 mm. Is the tool suitable for deep-hole drilling? This tool is designed for medium-depth holes given the 69 mm cutting length; for deeper through-tool or deep-hole applications, alternative tool concepts should be considered. Can replacement inserts be sourced from other brands? Replacement inserts are readily available from compatible manufacturers such as Taegutec and YG-1; compatibility with other brands is not specified. What is the SKU for ordering and documentation? The article is listed under SKU U823TM and sold as an indexable insert drill by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Solid Carbide Through Drill 72mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of the combination of proven rigidity, deep‑hole capability and simple insert replacement to keep machining cycles steady and predictable; order the tool directly via Metav Werkzeuge or consult the sales team for application advice. Indexable insert drill U410TM by Teknik Makina — 18 mm, 72 mm cutting length The Indexable insert drill U410TM is engineered for production drilling where repeatability and fast insert changes are essential, suitable for medium‑depth holemaking in a range of machining centres. *Indexable design for SOMT 0602 inserts *25 mm shank for rigid machine mounting *72 mm cutting length for deeper holes *Compatible with Taegutec inserts High‑precision holemaking that stabilises cycle times The U410TM is designed to deliver consistent bore geometry by combining a defined 18 mm diameter with a 72 mm cutting length, which permits deeper holemaking without sacrificing stability. The indexable concept reduces variability between tool changes because the cutting edge is replaced precisely rather than regrinded; this reduces set‑up variation and contributes to a reproducible process. Where shopfloor efficiency matters, the geometry and insert seating are critical for maintaining runout and minimising rework — the tool’s engineered interface for SOMT 0602 inserts supports that demand. Robust shank and length proportions for secure clamping A 25 mm shank with a 56 mm shank length gives the tool a low tendency to deflect under radial cutting forces, increasing the probability of first‑pass quality in serial production. The 150 mm overall length paired with the shank proportions balances accessibility and rigidity, making the holder‑to‑tool transition predictable during heavy interrupted cuts. The mass of 0.347 kg keeps inertial load modest while remaining substantial enough for smooth chip evacuation and vibration damping, which supports steady surface finish and bore roundness over extended runs. Insert system that speeds service intervals and reduces costs The insert‑based concept, compatible with Taegutec‑type plates and the SOMT 0602 geometry, shortens maintenance time: worn inserts are swapped in seconds and insert stock is compact. This reduces downtime compared with regrinding solid tools and lowers lifetime tooling expenditure when multiple inserts are stocked. The modular approach also allows quick adaptation of cutting grades and coatings as required by different workpiece alloys or cutting conditions, making the drill a flexible element in a cost‑conscious production strategy. For specification queries or to confirm compatibility with a spindle and holder, consult the technical team at Metav Werkzeuge (details below). For procurement and technical matching of Teknik Makina indexable drilling solutions, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U410TM Manufacturer: Teknik Makina Product type: Indexable insert drill Compatible insert: SOMT 0602 Compatible insert manufacturer: Taegutec Core dimensions Diameter: 18 mm Overall length: 150 mm Cutting length: 72 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.347 kg Special features Indexable insert system Rapid insert replacement Designed for rigid clamping and production use FAQ What insert type fits this drill? The drill accepts SOMT 0602 indexable inserts; the toolbody is machined to locate and clamp these plates accurately. Is the U410TM compatible with Taegutec inserts? Yes — the U410TM is specified for use with Taegutec‑type inserts, enabling straightforward sourcing of cutting grades. What are the key dimensions to check before ordering? Verify the 18 mm diameter, 150 mm overall length and 25 mm shank diameter to ensure compatibility with the machine holder and required hole depth. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Solid Drill 17mm Cutting Length 68mm Shank 25mm, 146mm Overall Length - Teknik Makina
Take advantage of a compact indexable drill body that combines reliable insert compatibility and straightforward machine clamping to keep production steady; the tool’s 17 mm diameter and compatibility with SOMT 0602 inserts deliver repeatable holemaking while minimising tooling costs. Order directly via Metav Werkzeuge or consult the team for application advice. Indexable drill U408TM – 17 mm diameter, for SOMT 0602 inserts (Teknik Makina) The Indexable drill U408TM is an indexable drill body engineered for precision holemaking in CNC machining operations, designed to accept SOMT 0602 indexable inserts and to provide consistent results across repeat production runs. 17 mm diameter for standard hole sizes Compatible with SOMT 0602 indexable inserts 25 mm shank for secure machine clamping 68 mm cutting length, 146 mm overall length Consistent holes through indexable-insert technology Indexable-insert drilling offers a clear economic advantage for medium- to high-volume production: the cutting edge is replaced, not the whole tool. The tool body is built for SOMT 0602 inserts, allowing predictable tool life and fast edge changes. With a nominal 17 mm diameter the system suits common holemaking tasks while the replaceable inserts deliver repeatable geometry and simplified inventory management, reducing per-hole cost compared with solid-tool alternatives. Secure clamping and reduced setup time A robust 25 mm shank and a 56 mm clamping length provide stable seating in standard tool holders and reduce the risk of runout. Stable clamping translates directly into better surface finish and longer insert life. The comparatively lightweight body (approx. 0.338 kg) eases handling during tool changes; the result is quicker set-up cycles on the machine and less unproductive time between batches. Geometry and dimensions that support deeper operations The tool’s 68 mm cutting length combined with a 146 mm overall length means the body can reach moderate depths while remaining compact enough for rigid setups. Cutting length defines the maximum effective engagement of the indexable insert; selecting an appropriate insert grade and setting the correct feed and speed will maintain cutting performance throughout the intended penetration depth. These dimensions make the drill body suitable for stacked part production where predictable axial reach is essential. Practical advantages in the workshop The compatibility with Taegutec-style inserts provides access to a wide choice of grades for different cutting conditions and materials. As an indexable drill body, the U408TM helps to lower tooling logistics by standardising on a single insert type (SOMT 0602) across several drill diameters where possible, facilitating tool change routines and cutting-parameter optimisation. The result is improved process reliability and more efficient planning for maintenance and inserts procurement. For application-specific recommendations or to secure delivery from Emmerich, contact Metav Werkzeuge—refer to Teknik Cutting Tools' U408TM specification and request tailored machining advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: U408TM Manufacturer: Teknik Makina Core dimensions Diameter: 17 mm Cutting length: 68 mm Overall length: 146 mm Shank diameter: 25 mm Clamping length: 56 mm Weight: 0.338 kg Compatibility & features Indexable drill body for insert mounting Compatible insert type: SOMT 0602 Compatible insert manufacturer: Taegutec FAQ What insert type does the tool use? The tool is designed for SOMT 0602 indexable inserts; the U408TM accepts this insert format for straightforward edge replacement. What is the nominal drilling diameter offered? The drilling diameter is 17 mm, which is the nominal size for this indexable drill body and the basis for insert selection. Which shank diameter is required for clamping? The tool features a 25 mm shank; a matching holder or chuck with adequate clamping surface is recommended to ensure stability. How deep can the tool cut effectively? The effective cutting length is 68 mm; this specifies the maximum engagement length for the insert before the body’s geometry limits penetration depth. Is the U408TM compatible with Taegutec inserts? Yes, the U408TM is compatible with Taegutec-style inserts of the SOMT 0602 designation and is suitable for setups using those grades and geometries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Solid Drill 23.5mm Cutting Length 69mm Shank 25mm, Weight 0.413kg - Teknik Makina
Take advantage of the combination of high‑stability shank design and standardised insert compatibility to increase machining reliability and reduce tool change downtime; order the tool via Metav Werkzeuge or request detailed technical advice from the Metav consultants. Indexable Insert Drill U157TM — 23.5 mm diameter, 25 mm shank (Teknik Makina) A robust Indexable Insert Drill U157TM designed for precision holemaking with Korloy indexable inserts, suitable for use in standard 25 mm toolholders. 23.5 mm cutting diameter 25 mm shank diameter Compatible with Korloy WCM‑0402 inserts 69 mm cutting length Higher throughput with an optimised geometry The design focuses on measurable productivity: a 23.5 mm cutting diameter combined with a 69 mm cutting length allows for deeper, single‑pass operations where appropriate, reducing the number of tool changes per workpiece. The tool body is engineered for rigidity to minimise vibration and contribute to consistent cycle times. By using a tool that matches common industrial insert standards, process planners achieve predictable material removal rates and can quantify potential time savings in production schedules. Predictable accuracy through standardised interfaces Compatibility with the Korloy WCM‑0402 insert format and a 25 mm shank ensure straightforward integration into existing toolholder ecosystems. The standardised insert interface makes it simple to replicate cutting conditions across multiple machines, helping production engineers maintain repeatable hole quality. The combination of a precise shank dimension and a defined cutting length promotes stable clamping and concentricity, which are essential for maintaining tight hole tolerances in repeated series. Easy handling and reliable replacement strategy With a 150 mm total length and a shank engagement length of 56 mm, the tool is dimensioned for secure mounting and accessible insert replacement. The modest mass of 0.413 kg simplifies manual handling when fitting the tool to the spindle or changing inserts, reducing ergonomic strain in the workshop. Where operators are less familiar with indexable systems, the modular nature of insert tooling reduces downtime: worn inserts are replaced quickly without discarding the entire tool body, supporting predictable maintenance planning and cost control. For procurement or detailed specification requests related to this Teknik Makina indexable insert drill, contact Metav Werkzeuge in Emmerich for precise application advice and supply options — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: U157TM Manufacturer: Teknik Makina Product type: Indexable insert drill Facts Diameter: 23.5 mm Shank diameter: 25 mm Cutting length: 69 mm Shank length: 56 mm Total length: 150 mm Weight: 0.413 kg Special features Suitable for Korloy WCM‑0402 inserts Compatible insert supplier: Korloy Shank mounting diameter 25 mm FAQ What is the nominal diameter of the tool? The tool has a nominal cutting diameter of 23.5 mm for the Teknik Makina indexable insert drill U157TM. Which inserts are compatible with this drill? This drill is designed for use with Korloy WCM‑0402 indexable inserts; the insert pocket and clamping arrangement match that standard. What shank dimensions are relevant for holder selection? Key dimensions are a 25 mm shank diameter and a 56 mm shank engagement length; the overall tool length is 150 mm. How deep can this tool cut in a single pass? The defined cutting length is 69 mm; this determines the maximum workable depth per insert configuration and should be matched to the application and insert grade. What is the tool weight for handling considerations? The tool weighs 0.413 kg, which supports easy manual handling when mounting or changing inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Solid Drill 23mm Cutting Length 69mm Shank 25mm, Weight 0.4kg - Teknik Makina
Benefit from a high-performance solid drill that combines a precise 23 mm diameter, an extended 69 mm cutting length and a secure 25 mm shank for reliable deep-hole machining; order the tool directly via Metav Werkzeuge or consult our specialists for application support. Solid drill U156TM by Teknik Makina — 23 mm diameter, 69 mm cutting length A robust solid drill U156TM designed for indexable WCM-0402 inserts, optimised for stable deep-hole drilling in machining and toolroom applications. 23 mm diameter for standardised holes 69 mm cutting length for deeper bores 25 mm shank for secure clamping Improved drilling performance for production environments The solid design delivers consistent chip formation and stable cutting conditions, which translates into higher process reliability in series production. With a 69 mm cutting length, this drill enables deeper penetration without changing the tool, reducing cycle time and machine downtime. The tool’s geometry is matched to indexable insert technology, so the combination of insert and body ensures repeatable hole quality and efficient chip evacuation. Compatibility and cost-efficiency through indexable inserts Designed to accept WCM-0402 inserts from Korloy, the tool provides an economical approach to machining: only the inserts are replaced when worn, not the entire drill body. This results in lower tooling costs and faster changeovers. The 25 mm shank diameter ensures secure clamping in standard toolholders, supporting concentricity and minimising runout for improved surface finish and hole tolerances. Practical advantages for the workshop and production planning Weighing 0.4 kg and featuring a total length of 150 mm, the tool is compact enough for versatile setup while offering the reach required for many component geometries. The drill’s measured dimensions and insert system simplify tool inventory management and procurement planning, helping to reduce the number of unique toolholders and increasing operational flexibility on the shop floor. Contact Metav Werkzeuge today for detailed application advice and to arrange availability from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U156TM Manufacturer: Teknik Makina Facts Diameter: 23 mm Cutting length: 69 mm Shank diameter: 25 mm Shank length: 56 mm Total length: 150 mm Weight: 0.4 kg Special features Solid drill design Compatible with Korloy indexable inserts Insert type: WCM-0402 Files available: 62de7ec3a9cff922f4703d40, 62de7ddaa9cff922f4703d13 FAQ What insert type does this drill use? The drill accepts WCM-0402 indexable inserts, specified for use with the solid drill U156TM and compatible with Korloy insert geometry. Is the shank suitable for standard toolholders? Yes, the 25 mm shank diameter is intended for secure clamping in standard holders, ensuring concentricity and reduced runout for precise holes. What drilling depth can be achieved with this tool? With a 69 mm cutting length and a total length of 150 mm, the tool is optimised for deeper through-holes and many blind-hole applications in general machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Solid Drill 24mm Cutting Length 72mm Shank 25mm, 0.446kg - Teknik Makina
Take advantage of a cost-efficient, maintainable indexable drilling solution: the combination of Ø 24 mm diameter, 72 mm cutting length and compatibility with SOMT 08T3 inserts reduces tooling cost while keeping production flow stable. Order the tool directly via Metav Werkzeuge or consult their specialists for application advice. Indexable drill U322TM – Indexable drill body, Ø 24 mm, Teknik Makina The indexable drill U322TM is a tool body designed for efficient holemaking where fast insert changes and secure clamping are required in industrial production environments. Indexable design for fast insert replacement Accepts SOMT 08T3 inserts (Taegutec compatible) Ø 24 mm with 72 mm cutting length 25 mm shank for secure toolholding Reliable production results with reduced tooling cost The U322TM offers a pragmatic balance between performance and economy: its indexable insert concept keeps consumable costs low because only the inserts require replacement, not the entire tool. With a 72 mm cutting length and a precisely machined body, the design promotes consistent hole quality over series runs. For operations that favour predictable tool life and straightforward reconditioning, this approach lowers total cost of ownership while maintaining repeatable hole dimensions. Quicker changeovers and less downtime Indexable inserts such as the SOMT 08T3 enable fast, repeatable insert changes without complex regrinding, shortening downtime during tool swaps. The tool body accepts inserts from the Taegutec family, simplifying procurement when standard inserts are already in use on the shop floor. The indexable format supports rapid set-up procedures and contributes directly to higher machine uptime and throughput. Secure clamping and stable machining A 25 mm shank and a balanced overall length of 150 mm provide the rigidity necessary for stable cutting, especially when paired with appropriate toolholders. The clearly defined cutting length and shank dimensions help planners select the correct combination of holder and machine spindle interface, reducing runout and improving hole roundness. The robust mounting and geometric accuracy of the body translate into reliable process capability in repetitive drilling tasks. Practical application guidance and compatibility The U322TM is supplied as a tool body intended for use with indexable inserts; operators should procure the SOMT 08T3 insert seats and compatible Taegutec inserts to complete the assembly. Replacement inserts can be rotated to present fresh cutting edges, restoring cutting performance quickly and economically. For manufacturing environments that prioritise predictable downtimes and straightforward inventory of spare parts, the indexable concept is particularly advantageous. Contact Metav Werkzeuge today to confirm the Teknik Makina U322TM’s suitability for the intended application and to secure reliable delivery from Emmerich Technical data Article number: U322TM Manufacturer: Teknik Makina ECLASS: 21180201 Facts Diameter: 24 mm Cutting length: 72 mm Overall length: 150 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.446 kg Special features Indexable insert tool body Accepts SOMT 08T3 inserts Compatible with Taegutec inserts SKU U322TM FAQ What inserts fit the U322TM? The U322TM accepts SOMT 08T3 inserts and is compatible with inserts from Taegutec, enabling straightforward procurement of replacement cutting edges. What are the key dimensions of this indexable drill body? Key dimensions are Ø 24 mm diameter, 72 mm cutting length, 150 mm overall length and a 25 mm shank; these figures define holder selection and reach. Is the U322TM supplied with inserts? The U322TM is a tool body designed for indexable inserts; the body is listed under SKU U322TM, while inserts such as SOMT 08T3 are ordered separately. How does the indexable concept benefit production? Indexable systems like the U322TM reduce consumable cost and shorten maintenance time because worn edges are replaced by rotating or fitting new inserts rather than replacing the entire tool body. Which manufacturer produced the tool body? The tool body is produced by Teknik Makina and is described under SKU U322TM for industrial drilling applications. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Solid Drill 32mm Shank 150mm Cutting Length 241mm Overall Length, WCM-06T3 Compatible - Teknik Makina
Take advantage of a robust indexable drill solution that pairs a Ø 30 mm cutting diameter with a 150 mm cutting length for consistent bore quality; order directly via Metav Werkzeuge or request assistance from our consultants for application matching. Vollbohrer U790TM – indexable insert drill body, Ø 30 mm, 150 mm cutting length (Teknik Cutting Tools) The Vollbohrer U790TM is an indexable insert drill body engineered for precision metalworking where repeatable hole quality and fast insert changes matter Indexable design for WCM-06T3 inserts Ø 30 mm diameter for medium holes 150 mm effective cutting length 32 mm shank for rigid clamping Consistent bore performance through clear dimensions and design The drill body delivers measurable stability by combining a Ø 30 mm cutting diameter with a 150 mm cutting length and a 32 mm shank, all contributing to reduced vibration and improved concentricity. These core dimensions — 241 mm overall length and a mass of 0.992 kg — are specified for planning fixture layouts and calculating tool overhang. The indexable concept eliminates the need to resharpen cutters: worn inserts are replaced quickly, keeping cycle times low while maintaining repeatable hole tolerances. For engineers assessing tool life and process capability, the unitary specification offers a verifiable basis for tool selection. Practical benefits for machining campaigns and changeover times Designed to accept Korloy inserts of type WCM-06T3, this drill body supports rapid maintenance routines and predictable operating costs. The insert-compatible workflow reduces downtime compared with solid-carbide alternatives because individual cutting edges can be exchanged without replacing the whole tool. Where batch sizes vary, that translates into lower inventory cost for cutting edges and faster recovery after a tool failure. The robust 32 mm shank provides secure clamping in matching holders, helping to preserve tool geometry under load and enabling stable feed rates for efficient material removal. Ready for integration and backed by a European quality filter Specified as a precision tool body from Teknik Cutting Tools and listed under SKU U790TM, this component is suitable for series production where tool repeatability is essential. The straightforward geometry simplifies documentation and spindle setup, while the compatible insert system keeps consumables standardised. Metav’s stock and quality control in Emmerich act as a practical assurance for delivery reliability and product inspection, supporting procurement decisions with an experienced distribution partner and technical consultancy when required. For a tailored quotation or to confirm suitability for a specific application, contact Metav Werkzeuge for direct delivery from Emmerich and expert consultation on the U790TM drill body Technical data Article number: U790TM Manufacturer: Teknik Makina Core dimensions Diameter: 30 mm Cutting length: 150 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 241 mm Weight: 0.992 kg Compatibility & features Compatible inserts: WCM- 06T3 Compatible insert manufacturer: Korloy Product type: Indexable insert drill body FAQ Which insert type fits this drill body? The U790TM accepts WCM-06T3 indexable inserts and is specified for use with Korloy-manufactured cutting plates. What are the key dimensions to consider for setup? Key figures for the Vollbohrer U790TM are Ø 30 mm diameter, 150 mm cutting length, 32 mm shank diameter and 241 mm overall length. How does the shank size affect clamping and stability? A 32 mm shank offers a rigid connection to compatible toolholders, improving stability and supporting consistent hole quality under production feeds. What is the item number and who manufactured it? The item is listed as SKU U790TM and is supplied by Teknik Cutting Tools; full manufacturer details follow below. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Solid Drill Holder 25mm Shank 72mm Cutting Length 56mm Shank Length, 24.5mm Diameter - Teknik Makina
Take advantage of the 24.5 mm cutting diameter and the compatibility with SOMT 08T3 inserts to equip production with a standardised, service-friendly drilling solution; order via Metav Werkzeuge or contact our consultants to confirm fit and delivery. Indexable drill body U323TM by Teknik Cutting Tools — Ø 24.5 mm, for SOMT 08T3 inserts The Indexable drill body U323TM is a purpose-built drill holder designed for industrial CNC drilling operations, compatible with Taegutec SOMT 08T3 indexable inserts and intended for stable, repeatable holemaking. Compatible with Taegutec SOMT 08T3 inserts 24.5 mm cutting diameter for common hole sizes 25 mm shank diameter for standard toolholders 72 mm cutting length for deeper drilling operations Lower tooling costs through widely available inserts By accepting the SOMT 08T3 insert format, this drill body reduces inventory complexity and lowers per-hole tooling costs. The use of industry-standard indexable inserts keeps regrind and replacement cycles predictable and economical, enabling faster turnaround in maintenance. The modular design of the tool body allows replacement of the cutting edges without removing the entire holder, which shortens machine downtime and supports lean production scheduling. Stable drill geometry for consistent hole quality A 25 mm shank combined with a 72 mm cutting length and 150 mm overall length provides a balanced geometry that supports concentric clamping and reduces vibration in typical CNC spindles. The rigid configuration delivers repeatable diameters and bore straightness across production runs, which is essential for processes that require narrow tolerances. The component weight of 0.452 kg contributes to steady machining dynamics while remaining manageable for tool change systems. Seamless integration with established tool systems Designed for compatibility with Taegutec inserts and common toolholders, the holder integrates easily into existing toolsets. The 24.5 mm nominal cutter size fits a broad range of applications where this hole diameter is required, and the SOMT 08T3 interface makes sourcing replacement inserts straightforward. This compatibility supports a predictable supply chain and simplifies preventive maintenance planning in busy workshops. For reliable drilling with Teknik Cutting Tools' indexable drill bodies, contact Metav Werkzeuge in Emmerich to confirm suitability and delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: U323TM Manufacturer: Teknik Makina Facts Cutting diameter: 24.5 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length: 72 mm Shank length: 56 mm Weight: 0.452 kg Special features Compatible insert: SOMT 08T3 Compatible insert manufacturer: Taegutec Indexable insert drill body design Designed for CNC drilling/toolholder systems FAQ Which inserts fit this drill body? The Indexable drill body U323TM by Teknik Cutting Tools accepts SOMT 08T3 indexable inserts, compatible with Taegutec insert ranges. What is the cutting diameter and shank size? The tool offers a 24.5 mm cutting diameter with a 25 mm shank diameter; the SKU is U323TM from Teknik Cutting Tools. How deep can this tool cut effectively? The holder provides a 72 mm cutting length and a 150 mm overall length, suited to deeper holemaking within those dimensions. Is the tool suitable for standard CNC toolholders? Yes. The design of the Indexable drill body U323TM matches common toolholder interfaces for a 25 mm shank, enabling direct integration into many CNC setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Through Coolant Solid Drill SPMG 07T3 Compatible, 69mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of a compact toolset that combines rigid clamping, precise Ø 23.5 mm cutting and fast insert replacement for efficient cycle times; order directly via Metav Werkzeuge or consult our specialists for machining advice. Indexable Insert Drill – Ø 23.5 mm, 25 mm shank by Teknik Makina The Indexable Insert Drill is a purpose-built CNC drilling solution for medium‑diameter holes, designed to use SPMG‑style inserts for high productivity in workshop and production environments. 25 mm shank for rigid clamping Ø 23.5 mm cutting diameter 69 mm effective cutting length Compatible with SPMG 07T3 inserts Stable performance for repeatable holemaking The holder is engineered to deliver consistent hole quality through a combination of a 25 mm shank and a stiff body that reduces chatter and runout. This design lowers scrap rates and reduces rework because the tool maintains positional accuracy across long production runs. With an Ø 23.5 mm cutting diameter and a 69 mm cutting length, the tool balances rigidity and reach so that operators benefit from predictable, repeatable results even at higher feed rates. Fast insert changes and proven compatibility Interchangeable SPMG 07T3 inserts allow for quick index and replacement, which keeps machine downtime to a minimum. The tool is specified to accept inserts from established manufacturers such as Taegutec and YG‑1, ensuring a broad supply base and straightforward sourcing. The cartridge-style insert pocket simplifies seating and alignment so that the changeover process is efficient and reliable, supporting lean production practices. Workshop‑friendly dimensions and handling With an overall length of 150 mm and a shank length of 56 mm, the tool fits a wide range of toolholders while preserving adequate overhang for many standard drilling set-ups. The moderate mass of 0.412 kg keeps handling safe for technicians and simplifies balancing for high‑speed spindles. The combination of compact external dimensions and robust construction supports easy tool management in both single‑machine shops and larger cell production. Efficiency advantages on the shop floor Using indexable inserts reduces per‑hole cost compared with brazed or solid drills because only the insert is consumed during wear, not the entire tool body. The tool’s geometry promotes reliable chip control and encourages efficient chip evacuation, which contributes to longer insert life and fewer interruptions for clearing chips. For production environments seeking measurable gains in throughput, this toollist component supports an economical, high‑availability strategy. Contact Metav Werkzeuge for tailored application support and to discuss the Teknik Makina U823-1TM indexable insert drill with Ø 23.5 mm and 25 mm shank Technical Data Article number: U823-1TM Manufacturer: Teknik Makina Core dimensions Diameter: 23.5 mm Cutting length: 69 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 150 mm Weight: 0.412 kg Special features Compatible inserts: SPMG 07T3 Compatible insert manufacturers: Taegutec, YG-1 Tool type: Indexable insert drill FAQ Which inserts fit this drill? The drill accepts SPMG 07T3 inserts; compatible suppliers listed include Taegutec and YG‑1, allowing flexible sourcing. What are the key dimensions to check for set‑up? Relevant dimensions are a 23.5 mm cutting diameter, 69 mm cutting length, 25 mm shank diameter and 150 mm overall length. How quickly can inserts be changed? Insert replacement is designed for rapid index changes; the pocket geometry supports straightforward seating to reduce machine downtime. Is the tool suitable for automated tool‑changer systems? With a compact overall length of 150 mm and a standard 25 mm shank, the tool is compatible with typical automated tool‑changer setups when the holder accepts the shank diameter. What is the product code for ordering? Order reference: U823-1TM (Teknik Makina indexable insert drill) Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
15mm Indexable Drill for Taegutec SOMT 0502 inserts - Teknik Makina
Comprehensive Technical Specifications: Order Number: U304TM Item: Indexable Drill usable with SOMT 0502 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Numbers and Data: Diameter: 15mm Weight: 0.175kg Total length: 117mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
15mm Solid Carbide Straight Shank Full Hole Drill 45mm Cutting Length 50mm Shank Length, SPMG 0502 Compatible - Teknik Makina
Take advantage of precise 15 mm drilling, a 45 mm cutting length and a compact 114 mm overall length to streamline holemaking tasks; the tool’s compatibility with indexable inserts reduces tooling costs and downtime — order the product directly via Metav Werkzeuge or contact our consultants for tailored advice. Vollbohrer (Solid Drill) U815TM — 15 mm diameter, 20 mm shank by Teknik Makina Vollbohrer (Solid Drill) U815TM is a compact drilling solution for precision metalworking and CNC applications, engineered for insert compatibility and reliable repeatability 15 mm cutting diameter 45 mm cutting length 20 mm shank diameter Compatible with SPMG 0502 inserts Reliable, measurable performance for production environments The tool delivers consistent hole quality by combining a controlled cutting length with a stiff 20 mm shank. The 15 mm diameter and 45 mm cutting length provide a balance between chip evacuation and stability, which reduces chatter and rework in serial production. Measurable values such as total length 114 mm and weight 0.175 kg make process planning straightforward and support machine parameter setup in CNC programmes. This focus on factual data supports predictable cycle times and efficient throughput. Cost-effective insert compatibility and quick changeover Designed to accept SPMG 0502 indexable inserts, the drill reduces per-hole costs compared with solid-carbide replacements: only the small insert requires replacement while the body remains in service. Compatibility with established insert manufacturers such as Taegutec and YG-1 broadens supply options and simplifies sourcing. For workshops that value uptime, this approach combines the economy of indexable systems with the precision expected in fine metalworking, translating into lower tooling running costs and shorter maintenance intervals. Compact design that integrates with modern toolrooms With a 20 mm shank and an overall length of 114 mm, the tool fits a wide range of holders and arbors, enabling flexible integration into existing setups. The relatively light weight (0.175 kg) minimises additional dynamic loads on spindles and helps maintain balance at higher speeds. Clear numeric specifications and standardised interfaces support quick documentation and quality assurance processes, making the drill a practical choice for production, maintenance and jobbing environments that demand traceable performance. For production-grade drilling with proven insert compatibility, contact Metav Werkzeuge about the Teknik Cutting Tools solid drill U815TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical Data Article number: U815TM Brand: Teknik Makina Type: Vollbohrer (Solid drill) Facts Diameter: 15 mm Total length: 114 mm Cutting length: 45 mm Shank diameter: 20 mm Shank length: 50 mm Weight: 0.175 kg Special features Compatible insert: SPMG 0502 Compatible insert manufacturers: Taegutec, YG-1 Suitable for CNC and workshop drilling applications FAQ What materials is this drill intended for? The drill body is specified for general metalworking and, when fitted with the appropriate SPMG 0502 inserts, is suitable for a wide range of ferrous and non-ferrous materials depending on insert grade selection. Which inserts fit the U815TM? The U815TM accepts SPMG 0502 indexable inserts and is compatible with inserts from manufacturers such as Taegutec and YG-1. What are the key dimensions to plan for in a toolholder? Key dimensions are 15 mm diameter, 20 mm shank diameter, 50 mm shank length and 114 mm overall length, which inform holder selection and Z-axis clearance requirements. Is the tool suitable for CNC high-speed drilling? The compact geometry and shank design support integration into CNC processes; suitability for high-speed operation depends on the chosen insert grade and machine capabilities. How does the insert system affect running costs? Using indexable inserts such as SPMG 0502 lowers running costs by enabling economical insert replacement rather than replacing an entire solid tool, improving cost per hole for medium to long production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Schnellere Fertigung durch präzise Vollbohrer für industrielle Bearbeitungen
Vollbohrer, auch bekannt als Massivbohrer oder Durchgangsbohrer, sind speziell entwickelte Zerspanungswerkzeuge zum direkten Einbringen von Bohrungen in massives Werkstückmaterial. Sie werden bevorzugt auf Drehmaschinen und Bearbeitungszentren eingesetzt, um in einem einzigen Arbeitsgang große Materialvolumina wirtschaftlich abzutragen.
Effiziente Funktion und technischer Kontext für robuste Anwendungen
In der Praxis ermöglichen Vollbohrer das Bohren ohne vorheriges Zentrieren oder Vorbohren, wodurch Rüstzeiten reduziert werden. Bei Varianten ohne Innenkühlung wird der Kühlschmierstoff über externe Maschinendüsen zugeführt; diese Auslegung ist jedoch nur bei extrem kurzen Bohrtiefen und sehr leicht zerspanbaren Materialien geeignet, da produzierte Späne den Bohrkanal schnell verschließen können. Industrieller Standard sind Vollbohrer mit Innenkühlung: durch den Werkzeugkörper verlaufende Kanäle transportieren das Kühlmittel unter hohem Druck direkt an die Schneiden der Bohrerspitze. Dadurch werden Reibungswärme abgeführt und Spänemengen zuverlässig aus dem Bohrloch gespült, was ein Festklemmen, Riefenbildung und plötzliche Werkzeugbrüche effektiv verhindert.
Optimierte Produktion: Konkrete Vorteile für die Fertigung
- Reduzierte Rüstzeit durch Bohren in einem Arbeitsgang mit Vollbohrer oder Einstufenbohrer.
- Verbesserte Spanabfuhr dank innenliegender Kühlmittelkanäle, die die Standzeit verlängern.
- Minimiertes Bruchrisiko durch gezielte Kühlung und Druckspülung an der Bohrerspitze.
- Höhere Prozesssicherheit bei der Bearbeitung großer Materialvolumina auf Bearbeitungszentren.
- Anpassbar an Maschinentyp: Vollbohrer und Durchgangsbohrer sind für Drehmaschinen und Fräszentren verfügbar.
Metav als starker Partner für Beschaffung und Beratung
Metav fungiert als Qualitätsfilter und bietet mit Sitz in Emmerich ein lückenloses Sortiment für präzise Werkzeuge. Mit über 48.000 Kunden und mehr als 250.000 Produkten reduziert Metav die Lieferantenanzahl und liefert verlässlich an die Werkbank. Das Sortiment umfasst sorgfältig ausgewählte Vollbohrer, Massivbohrer und Durchgangsbohrer sowie Beratung zur richtigen Auslegung von Innenkühlung und Schneidengeometrie.
Kurz und prägnant: Wann Vollbohrer die beste Wahl sind
Für Anwendungen, in denen Bohren in einem Durchgang, sichere Spanabfuhr und maximale Prozesssicherheit gefordert sind, sind Vollbohrer die bevorzugte Lösung. Vollbohrer sowie die Varianten Massivbohrer und Durchgangsbohrer sorgen für effiziente, zuverlässige Bohrprozesse in der Serien- und Einzelfertigung.
FAQ
Was ist der Unterschied zwischen Vollbohrer mit Innenkühlung und ohne Innenkühlung?
Vollbohrer mit Innenkühlung führen das Kühlmittel durch Kanäle im Werkzeugkörper direkt an die Schneide und ermöglichen so effektive Wärmeabfuhr und Spantransport; Varianten ohne Innenkühlung werden von außen über Maschinendüsen gekühlt und eignen sich nur für sehr kurze Bohrtiefen und weiche Materialien.
Warum reduziert die Innenkühlung das Risiko von Werkzeugbruch bei Vollbohrern?
Die Innenkühlung führt das Kühlmittel unter hohem Druck an die Bohrerspitze, wodurch Reibungswärme reduziert und Späne aus dem Bohrloch gespült werden; dadurch werden Festklemmen und riefenbildung vermieden, was Werkzeugbrüche verhindert.
Auf welchen Maschinentypen werden Vollbohrer typischerweise eingesetzt?
Vollbohrer und ihre Synonyme Massivbohrer sowie Durchgangsbohrer werden hauptsächlich auf Drehmaschinen und Bearbeitungszentren eingesetzt, dort ermöglichen sie das wirtschaftliche Abtragen großer Materialmengen in einem Arbeitsgang.
Wie unterstützt Metav bei der Auswahl des passenden Vollbohrers?
Metav bietet ein umfangreiches Sortiment und fachkundige Beratung aus Emmerich; Kunden profitieren von Produktauswahl, technischen Informationen zur Innenkühlung und Empfehlungen für die passende Schneidengeometrie.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com