Vollbohrer für effizientes Tiefbohren in Massivwerkstoff
Vollbohrer ermöglichen das direkte Einbringen von Bohrungen in Massivwerkstoff und sparen durch den Einsatz auf Drehmaschinen und Bearbeitungszentren wertvolle Prozesszeit, indem sie große Materialvolumina in einem Arbeitsgang abtragen; dabei bietet die Variante mit Innenkühlung die notwendige Kühlmittelzufuhr, um hohe Reibungswärme abzuführen und Späne sicher aus dem Bohrloch zu spülen, während Ausführungen ohne Innenkühlung nur für sehr kurze Bohrtiefen und leicht zerspanbare Materialien geeignet sind; als Synonyme gelten Massivbohrer und Vollkernbohrer, die in der Zerspanung vor allem durch ihre Standzeit und Prozesssicherheit überzeugen.
29mm Solid Drill 116mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of the combination of deep-hole capability and secure clamping for uninterrupted production: the drill's Ø 29 mm diameter with a 116 mm cutting length enables stable, deeper bores while the 25 mm shank ensures reliable chucking. Order the drill directly via Metav Werkzeuge or ask our consultants for application advice. Solid drill U626TM — indexable drill body, Ø 29 mm, 200 mm overall length (Teknik Makina) A U626TM solid drill engineered for metalworking applications, offering deep-hole capacity with compatibility for Korloy WCM-0503 indexable inserts. Robust 29 mm diameter body 116 mm cutting length for deep holes 25 mm shank for secure clamping Consistent deep-hole performance for stable cycles The design provides a 116 mm cutting length within a 200 mm overall length, delivering the reach required for many through-hole and deep-pocket operations. That extended cutting zone reduces the need for multiple tool changes and supports fewer interruptions on the machine, which in turn improves process throughput. The combination of length and diameter is aimed specifically at avoiding flex and chatter during continuous runs, so production remains steady and predictable. Secure tool holding and precise positioning A 25 mm shank and a 56 mm shank length ensure firm clamping in standard toolholders and reduce axial play during machining. Reliable clamping is essential for repeatable bore quality; by stabilising the tool, the design reduces runout and optimises hole geometry. The resulting improvement in concentricity means fewer rejected parts and less rework, which is particularly relevant when producing precision components to tight tolerances. Cost-effective machining through insert compatibility Compatibility with WCM-0503 indexable inserts from Korloy allows economical regrinding cycles to be replaced by simple insert changes. This approach lowers per-hole tooling costs and shortens maintenance time compared with full-tool replacement. Using standardised inserts also simplifies inventory management and helps achieve consistent cutting performance across batches — a practical advantage for workshops and production shops aiming to control operating expenses without compromising quality. Built for workshop reliability and straightforward inspection With a measured weight of 0.68 kg and a compact but robust body, the tool balances rigidity with handling convenience for set-up and inspection tasks. The component's measurable metrics (diameter, cutting length, shank dimensions) support quick quality checks and documentation during incoming inspection or tool-room audits. Clear, verifiable specifications help integrate the part into tool lists and ERP systems without ambiguity. Contact Metav Werkzeuge for tailored advice on Teknik Makina indexable drill bodies and secure the U626TM for reliable deep-hole drilling — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U626TM Manufacturer: Teknik Makina Type: Solid drill / indexable drill body Facts Diameter: 29 mm Overall length: 200 mm Cutting length: 116 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.68 kg Special features Compatible with WCM-0503 indexable inserts Suitable insert manufacturer: Korloy Designed for metalworking deep-hole operations FAQ What inserts are compatible with this drill? The drill accepts WCM-0503 indexable inserts; the body is specified to work with Korloy WCM-0503 cutting inserts for straightforward replacement and consistent cutting performance. Which materials can be machined with this indexable drill body? The U626TM is intended for general metalworking applications; insert selection and cutting data should be matched to the workpiece material to achieve optimal results. How deep can this drill cut in one pass? The tool provides a 116 mm cutting length, which defines the maximum effective cutting depth in a single operation; actual axial engagement should follow the chosen insert manufacturer's recommendations. Is the shank suitable for standard collet or hydraulic chucks? The 25 mm shank and 56 mm shank length are compatible with standard toolholders; selection of the appropriate holder type depends on the machine and precision requirements. How does indexable insert use affect running costs? Using replaceable WCM-0503 inserts reduces the cost per cutting edge by avoiding full-tool replacement and minimises downtime for reconditioning, improving overall machining economy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
29mm Solid Drill 145mm Cutting Length 25mm Shank Diameter 56mm Shank Length - Teknik Makina
Take advantage of the practical combination of durable construction, straightforward insert replacement and precise holemaking for efficient production. Order the indexable insert drill directly via Metav Werkzeuge or ask our consultants if needed. Indexable Insert Drill – high-performance insert drill, Ø 29 mm, 25 mm shank (Teknik Makina) The Indexable Insert Drill is designed for precision drilling with replaceable Korloy inserts in industrial CNC and workshop applications Ø 29 mm cutting diameter 25 mm shank for standard toolholders 145 mm cutting length for deeper holes Compatible with Korloy WCM-0503 inserts Reliable hole quality with replaceable inserts The primary benefit of an indexable insert drill lies in consistent hole quality while reducing tooling costs. The design accepts Korloy WCM-0503 inserts so cutting edges can be exchanged quickly instead of replacing the entire tool, which lowers downtime and inventory expense. With a 25 mm shank and a robust body, the tool delivers stable clamping and repeatable concentricity, enabling uniform results across production batches. Efficient deep-hole performance for CNC operations Optimised for longer engagement, the tool’s 145 mm cutting length and overall length 229 mm permit deeper holemaking without frequent tool changes. This configuration supports higher material removal per tool life, improving process efficiency on lathes and milling machines equipped for indexable drills. The balanced geometry promotes effective chip evacuation and steady feed rates, which translates to faster cycle times and reduced secondary finishing. Practical integration and workshop advantages Compatibility with a recognised insert family simplifies stocking and process planning: the insert type accepted is WCM-0503, supplied by Korloy. The tool’s moderate weight of 0.76 kg and standard shank dimensions make it straightforward to mount into common toolholders, while the replaceable-insert concept delivers low running costs compared with one-piece drills. For engineering teams, this means predictable maintenance intervals and straightforward quality checks, supporting smoother production management. Contact Metav Werkzeuge in Emmerich for tailored application advice and to arrange supply of the Teknik Makina indexable insert drill with compatible Korloy inserts Technical data Article number: U789TM Manufacturer: Teknik Makina Diameter: 29 mm Shank diameter: 25 mm Cutting length: 145 mm Shank length: 56 mm Overall length: 229 mm Weight: 0.76 kg Compatible insert manufacturer: Korloy Compatible insert type: WCM-0503 Indexable insert concept Standard shank for conventional holders FAQ What insert type does the drill use? The drill accepts Korloy WCM-0503 indexable inserts; the modular concept allows rapid insert replacement to restore cutting performance. Which shank size should the toolholder accommodate? A 25 mm shank is required; the drill is specified with a 25 mm shank diameter for standard clamping systems. Is the tool suitable for deep holes? Yes, with a 145 mm cutting length and overall length of 229 mm the design supports deeper holemaking without frequent tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
29mm Solid Drill 87mm Cutting Length, 56mm Shank Length, 171mm Overall - Teknik Makina
Take advantage of the combination of durable indexable design, straightforward insert replacement and precise holemaking for efficient production. Order the component through Metav Werkzeuge or request technical advice for seamless integration. Vollbohrer (Indexable drill) by Teknik Makina — 29 mm diameter, WCM‑0503 inserts Vollbohrer presented as an indexable drill for reliable holemaking in production and workshop environments Indexable design for fast insert replacement Compatible with WCM‑0503 inserts (Korloy) 29 mm diameter, 87 mm cutting length 25 mm shank, 171 mm overall length High-performance drilling for consistent production results This indexable drill is engineered to deliver repeatable hole quality and stable process performance. With a 29 mm nominal diameter and an 87 mm cutting length, the tool provides an effective balance between reach and rigidity, reducing deflection during machining. The tool’s geometry supports predictable chip formation and consistent entry/exit behaviour, which helps maintain cycle times and reduces rework. Choosing an indexable solution also lowers tooling overhead because only the inserts require periodic replacement, not the entire body. Practical compatibility and easy maintenance for workshop efficiency Designed with a 25 mm shank and a 171 mm overall length, the holder ensures secure clamping in common toolholders and collets. The drill accepts WCM‑0503 inserts, compatible with Korloy specifications, enabling rapid index changes and straightforward inventory management of cutting edges. At 0.617 kg, the component is light enough for safe handling while offering sufficient mass for stable machining. The insert-based concept simplifies maintenance routines: worn edges are exchanged quickly, restoring cutting performance with minimal downtime. Proven supply and dependable service for professional users Sourcing this indexable tool from a reliable partner means fewer procurement risks and steady access to high-precision consumables. Teknik Makina’s component is suitable for standard production runs and retrofit applications where a robust, serviceable drill is required. Combined with Metav Werkzeuge’s broad product range and logistical experience, the solution supports uninterrupted workshop operation and straightforward restocking. For buyers seeking measurable improvements in machining uptime and tool utilisation, this tool contributes to consistent process economics and predictable output quality. For procurement or application guidance on Teknik Cutting Tools products such as this indexable drill, contact Metav Werkzeuge for personalised advice and assured supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: U168TM Manufacturer: Teknik Makina Product: Vollbohrer (indexable drill) Facts Diameter: 29 mm Overall length: 171 mm Cutting length: 87 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.617 kg Special features Insert type: WCM‑0503 Compatible inserts manufacturer: Korloy Indexable design for insert replacement Suitable for standard toolholder clamping FAQ What inserts fit this drill and from which supplier are they compatible? The drill accepts WCM‑0503 inserts; compatibility is specified for Korloy-type cutting inserts to ensure proper seating and cutting geometry. Which dimensions should be considered when selecting a holder for this tool? Important dimensions include the 25 mm shank diameter and 171 mm overall length, which determine holder selection and required clearance. How much cutting length is available for through-hole operations? The tool provides an 87 mm cutting length, offering a balance between reach and rigidity for many through-hole and deep-hole tasks. Is this tool heavy to handle during setup? Weighing 0.617 kg, the component is manageable for manual handling and mounting while remaining substantial enough for stable machining. What identification helps when reordering the same item? Use the article number U168TM and reference the indexable design with WCM‑0503 inserts to ensure consistent replacement and reordering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
29mm Solid Drilling Head 58mm Cutting Length, 56mm Shank Length, 142mm Overall - Teknik Makina
Benefit from a robust combination of a 29 mm cutting diameter, 58 mm cutting length and a rigid 25 mm shank that delivers stable holemaking and repeatable results; order the indexable drill body from Metav Werkzeuge or consult our specialists for application support. Indexable drill body by Teknik Makina — 29 mm Ø, 58 mm cutting length The Indexable drill body is a purpose-built drilling solution for medium-depth holemaking in industrial machining, compatible with Korloy WCM-0503 indexable inserts. 29 mm cutting diameter for larger bores 58 mm effective cutting length 25 mm cylindrical shank for solid clamping Compatible with Korloy WCM-0503 inserts Stable bore geometry for consistent production The tool’s design prioritises consistent hole geometry, with a 29 mm nominal diameter and a 58 mm cutting length that together reduce run-out and positional variance in repetitive drilling tasks. The effective cutting length refers to the portion of the tool engaging the workpiece; a clearly defined cutting length helps plan depth passes and minimise unexpected tool overload. By focusing on dimensional stability, the drill body supports predictable cycle times in component production and simplifies downstream processing that depends on accurate hole location. Secure clamping and compact overall design A 25 mm shank diameter paired with a 142 mm overall length provides a rigid connection to standard toolholders, limiting vibration during heavy cuts. The compact construction and a mass of 0.515 kg keep centrifugal load low while retaining the stiffness necessary for repeatable machining. Compatibility with Korloy WCM-0503 inserts means insert changes are quick and unambiguous, and the component is produced by Teknik Makina to fit industrial workflows where clamping reliability is essential. Efficiency gains through indexable inserts Using indexable inserts reduces tool change frequency and simplifies maintenance: only the worn insert is replaced, not the entire drill body. This approach leads to reduced downtime and a lower cost per hole in serial operations, particularly where insert stock is readily available. The body is suited to workshop and production settings that value fast reconditioning and predictable tooling lifecycle; planners can schedule insert rotations instead of complete tool swaps, improving machine utilisation. Contact Metav Werkzeuge for tailored application advice and procurement of the Teknik Makina indexable drill body U126TM, compatible with Korloy WCM-0503 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U126TM Manufacturer: Teknik Makina Diameter: 29 mm Overall length: 142 mm Cutting length: 58 mm Shank diameter: 25 mm Shank length: 56 mm Compatible inserts: WCM-0503 Compatible insert manufacturer: Korloy Weight: 0.515 kg Numbers / Core technical data Ø 29 mm Cutting length 58 mm Shank Ø 25 mm Shank length 56 mm Overall length 142 mm Weight 0.515 kg Special features Indexable drill body design Compatibility with Korloy WCM-0503 inserts Compact and rigid geometry for stable holemaking FAQ Which insert type fits this drill body? The drill body accepts Korloy WCM-0503 indexable inserts; compatibility is specified for the body to ensure correct seating and cutting geometry. What is the shank diameter and is it suitable for standard toolholders? The tool has a 25 mm shank diameter, providing a secure interface for standard clamping systems and resisting vibration under normal drilling conditions. What lengths are relevant for planning drilling depth? Use the 58 mm cutting length to define the maximum effective engagement in the workpiece and the 142 mm overall length to check clearance and holder compatibility. Is the product identified by a stock code? Yes, the item is listed as U126TM, which can be used when enquiring or ordering the Teknik Makina indexable drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
30.5mm Solid Carbide Boring Bar 90mm Cutting Length, 32mm Shank - Teknik Makina
Secure consistent bore quality with a cost-effective indexable solution offering a 30.5 mm nominal diameter and a 90 mm cutting length combined with a robust 32 mm shank for stable clamping. Order the tool directly via Metav Werkzeuge or ask our consultants for tailored advice. Indexable drill — 30.5 mm, 90 mm cutting length (Teknik Makina) Indexable drill by Teknik Makina for medium‑depth holemaking using Korloy WCM‑06T3 inserts Compatible with Korloy WCM‑06T3 inserts 30.5 mm nominal diameter 90 mm cutting length for deeper bores 32 mm shank for stable clamping Reduced running costs through replaceable inserts The indexable design relies on replaceable inserts, which lowers unit costs compared with one‑piece cutters. By changing only the cutting tips rather than the entire tool body, workshop expenses are kept predictable and downtime is reduced through rapid insert changes. The result is more economical series production and a clearer cost‑benefit balance when compared with solid tools. Stable clamping and consistent hole quality A 32 mm shank delivers secure fixture in standard toolholders, translating into improved concentricity and repeatability. Combined with the 90 mm cutting length and a 181 mm overall length, the tool is suited to medium‑deep bore operations where vibration damping and stable chip control matter. The configuration supports consistent hole quality and helps to maintain tolerances across production runs. Compatible tooling system for straightforward integration The cutter accepts Korloy WCM‑06T3 inserts, a common family of indexable tips that simplifies reordering and reduces inventory complexity. Using a widely adopted insert standard promotes interoperability with existing toolholders and spare parts, making the unit a practical addition for industrial workshops seeking reliable, standardised tooling solutions. Workshop handling and predictable performance Weighing 0.844 kg, the tool body is substantial enough to resist chatter while remaining manageable for assembly and change‑over. The balanced combination of 30.5 mm diameter and the indexable concept delivers a purposeful compromise between material removal rate and finishing behaviour. For machining operations that demand repeatability rather than one‑off removal rates, this design offers dependable, measurable results. For assured precision and lower running costs choose the Teknik Makina indexable drill U171TM — contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U171TM Manufacturer: Teknik Makina Core dimensions Diameter: 30.5 mm Cutting length: 90 mm Overall length: 181 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.844 kg Tool features Compatible inserts: Korloy WCM‑06T3 Tool type: Indexable drill FAQ What insert type does this cutter use? The cutter accepts Korloy WCM‑06T3 inserts; the indexable setup is designed for straightforward insert replacement and inventory alignment. Which nominal diameter and cutting depth are offered? The tool provides a nominal diameter of 30.5 mm with a cutting length of 90 mm, suitable for medium‑depth bores. Is the shank suitable for standard toolholders? Yes. The 32 mm shank is intended for stable clamping in compatible holders to improve concentricity during drilling. Can this tool be used for series production? The indexable design and replaceable inserts make the tool well suited to series production where reduced running costs and quick tip changes are priorities. What is the product identifier for ordering or technical references? Refer to the SKU U171TM and the Teknik Makina indexable drill when requesting availability or technical details. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
30mm Solid Carbide Boring Bar 60mm Cutting Length, 32mm Shank - Teknik Makina
Inconsistent product data: the item is listed as "Vollbohrer" (solid drill) but also specifies compatibility with indexable inserts (SPMG 0904); please verify the product information to ensure accuracy and avoid potential confusion, as this discrepancy could lead to misunderstandings regarding the intended use or functionality of the product, particularly for customers who rely on precise specifications when making purchasing decisions, and it is crucial to confirm whether the tool is indeed a solid drill or if it is designed to accommodate indexable inserts, as this distinction impacts its application in various machining processes and could affect performance, usability, and overall customer satisfaction.
30mm Solid Carbide Straight Shank Through Coolant Boring Bar 120mm Cutting Length, 32mm Shank - Teknik Makina
Take advantage of a rigid 32 mm shank and a long 120 mm cutting length for stable, deep-hole machining; compatibility with Korloy WCM-06T3 inserts keeps tooling costs low and downtime short. Order the drill body directly via Metav Werkzeuge or ask our consultants for application advice. Indexable-insert drill body U628TM — 30 mm diameter, 120 mm cutting length (Teknik Cutting Tools) An indexable-insert drill body designed for medium-deep drilling tasks, compatible with Korloy WCM-06T3 replaceable inserts and engineered for secure clamping in 32 mm toolholders 30 mm cutting diameter 120 mm cutting length 32 mm shank for high rigidity Compatible with Korloy inserts Consistent hole quality through improved rigidity The drill body delivers a stable machining platform thanks to its 32 mm shank, which reduces vibration and runout during drilling. The combination of a wide shank and a 30 mm diameter supports reproducible hole geometry and helps maintain tight positional and size tolerances. For production environments aiming to decrease scrap rates, this stability translates into fewer reworks and consistent cycle times. Economical machining with replaceable inserts Equipped to accept WCM-06T3 indexable inserts from Korloy, the tool reduces running costs compared with solid carbide alternatives. Replaceable cutting tips mean that only the insert needs swapping when worn, not the entire tool body. The 120 mm cutting length enables deeper operations without changing tools, so setups are simplified and tooling inventory can be optimised for lower total cost of ownership. Practical integration into existing tool systems With an overall length of 211 mm and a shank mounting length of 58 mm, the tool fits standard 32 mm holders used across many machining centres. The body’s mass of 0.912 kg balances stiffness with manageable handling during tool changes. The U628TM is supplied as a drill body suited for indexable-insert workflows and is especially useful where fast tip changes and predictable tool life are priorities. For reliable supply and technical guidance on the Teknik Cutting Tools U628TM drill body, contact Metav Werkzeuge in Emmerich — expert advice and fast shipping from the European quality filter: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: U628TM Manufacturer: Teknik Makina Designation: Indexable-insert drill body (Vollbohrer) Facts Diameter: 30 mm Cutting length: 120 mm Overall length: 211 mm Shank diameter: 32 mm Shank mounting length: 58 mm Weight: 0.912 kg Special features Compatible inserts: WCM-06T3 Compatible insert manufacturer: Korloy Files available: 2 FAQ What insert type does this drill body accept? The drill body accepts WCM-06T3 indexable inserts; Korloy is listed as the compatible insert manufacturer for the U628TM. Is the shank size suitable for standard toolholders? Yes, the 32 mm shank is compatible with common 32 mm mounting systems, providing rigidity for stable drilling. How deep can this tool drill effectively? The tool provides a 120 mm cutting length, allowing medium-deep holemaking without additional extensions. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
30mm Solid Carbide Through Drill 90mm Cutting Length 32mm Shank, 181mm Overall Length - Teknik Makina
Take advantage of a robust combination of reliable drilling performance and straightforward maintenance: the tool’s 30 mm diameter and 90 mm cutting length deliver consistent deep-hole results while the 32 mm shank ensures secure clamping in standard toolholders — order the tool directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Solid drill U170TM by Teknik Makina — 30 mm diameter, 90 mm cutting length The Solid drill U170TM is a heavy-duty industrial drilling solution designed for metalworking centres and drilling operations where extended reach and stable clamping are required, compatible with Korloy indexable inserts for efficient reconditioning. 30 mm diameter for consistent hole size 90 mm cutting length for extended reach 32 mm shank for secure clamping Compatible with Korloy WCM-06T3 inserts Consistent hole quality for production runs The design provides predictable results in serial drilling: the 30 mm nominal diameter combined with a 90 mm cutting length keeps the cutting zone stable over long cycles, which reduces dimensional scatter. The tool body and geometry are optimised to ensure repeatable centring and chip evacuation, so the drilling process is maintained under controlled conditions. This stability supports higher first-pass yields and reduced rework in batch production. Quick retrofit and economical reconditioning A main economic advantage is the use of replaceable cutting elements: the tool is specified for Korloy WCM-06T3 inserts, which enables rapid onsite replacement of worn edges without full tool changeover. Insert-based servicing shortens downtime and lowers consumable cost compared with disposable solutions. The 32 mm shank and standard interface make integration into existing tooling systems straightforward, enabling fast retrofitting across compatible toolholders. Built for demanding machining centres and secure clamping With an overall length of 181 mm and a shank length of 58 mm, the assembly balances reach and rigidity for machining centres and heavy-duty drilling machines. The relatively low mass of 0.847 kg helps maintain dynamic balance at typical spindle speeds while the robust shank diameter ensures torque transmission and secure clamping. The specification supports stable machining under higher feed and depth conditions when paired with suitable insert grades and cutting parameters. For supply, dimension checks or technical consultation on the Teknik Makina U170TM solid drill, contact Metav Werkzeuge for precise compatibility guidance and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U170TM Manufacturer: Teknik Makina Product name: Solid drill (Vollbohrer) Facts Diameter: 30 mm Total length: 181 mm Cutting length: 90 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.847 kg Special features Compatible with Korloy WCM-06T3 inserts Designed for indexable insert replacement Suitable for industrial metalworking and drilling centres FAQ What insert type is specified for this drill? The drill is specified for Korloy WCM-06T3 inserts; the insert choice determines material suitability and cutting data for the U170TM. Can the tool be clamped in standard toolholders? Yes, the 32 mm shank and 58 mm shank length are compatible with common clamping systems used in machining centres. What is the maximum drilling reach provided? The effective drilling reach is supported by a 90 mm cutting length within a total tool length of 181 mm. Is the tool suitable for serial production? The geometry and insert-based design make the tool well suited to serial drilling where repeatability and quick edge replacement are required. How does the insert system affect running costs? Using replaceable Korloy inserts reduces downtime and lowers consumable expense by allowing edge changes instead of full-tool replacement, improving cost-efficiency over long production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
30mm Solid Drill 120mm Cutting Length 58mm Shank Length, SPMG 0904 Insert Compatible - Teknik Makina
Take advantage of the combination of a 30 mm cutting diameter, 120 mm effective cutting length and a 32 mm shank for stable, repeatable holemaking; order directly via Metav Werkzeuge or request consultancy from the Metav team for technical guidance. Indexable drill U730TM – Indexable drill body, Ø 30 mm, 120 mm cutting length (Teknik Makina) A robust Indexable drill U730TM designed for deep-hole machining and flexible insert use in CNC and machining centres Ø 30 mm cutting diameter for robust holemaking 120 mm effective cutting length for deep drilling 32 mm shank diameter for secure toolholding Compatible with SPMG 0904 inserts (Taegutec, YG-1) Precision and stability for demanding drilling The U730TM is engineered to deliver consistent results through a combination of a 30 mm nominal diameter and a reinforced 32 mm shank, which together improve concentricity and minimise tool deflection under load. The solid construction and balanced geometry support stable cutting conditions on machining centres, so that tool life is preserved and bore quality is repeatable. This stability translates directly into fewer rejected parts and more predictable cycle times for production runs. Flexible insert system that lowers operating costs Accepting SPMG 0904 indexable inserts from established suppliers such as Taegutec and YG-1, the tool body enables rapid insert changes and consistent edge geometry without the need to replace the complete tool. The use of standardised inserts reduces inventory complexity and allows shops to select grade and coating combinations that suit specific workpiece materials. The modular approach supports economic tooling strategies and simplifies maintenance planning in busy workshops. Deep-hole capability and efficient setup With an effective cutting length of 120 mm and an overall length of 211 mm, the design is tailored for deeper holemaking where a longer reach is required while keeping rigidity acceptable. The 58 mm shank engagement length provides defined clamping depth for many toolholders, enabling secure retention and straightforward setup. These dimensional characteristics reduce the number of tool exchanges for multi-stage operations, supporting continuous machining and improved throughput. Integration into the workshop and typical applications Built for production environments and jobbing shops, this indexable drill body suits tasks where repeatable hole quality and fast servicing matter. The U730TM works well in component production, fixture manufacturing and series machining where insert-change speed and predictable performance are priorities. Specification-driven procurement benefits from the clear technical parameters, making the tool a reliable choice for planners seeking reduced downtime and simpler tool management. For technical clarification, compatibility checks or to procure the U730TM via Metav Werkzeuge, contact Metav Werkzeuge for a concise product consultation and supply arrangement – info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U730TM Manufacturer: Teknik Makina Product type: Indexable drill body Core specifications Diameter: 30 mm Cutting length: 120 mm Overall length: 211 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.93 kg Compatibility & special features Insert type: SPMG 0904 Compatible with inserts by Taegutec, YG-1 Shank engagement length: 58 mm Designed for CNC and machining centre use FAQ What insert type does this drill use? The U730TM indexable drill body uses SPMG 0904 inserts and is compatible with insert grades from Taegutec and YG-1. Can the tool be used for deep-hole machining? Yes, the U730TM features a 120 mm cutting length and an overall length of 211 mm, making it suitable for deeper holemaking tasks in series production. What are the shank dimensions and why do they matter? Shank diameter is 32 mm with an engagement length of 58 mm; these dimensions ensure secure clamping and reduced runout for consistent bore quality when used with appropriate holders. Which workshops will benefit most from this drill body? CNC production shops and toolrooms that prioritise rapid insert changes, repeatable bore geometry and reduced tooling inventory will find the U730TM particularly advantageous. Is the U730TM supplied with inserts? The U730TM is an indexable drill body; insert supply depends on the chosen configuration—SPMG 0904 inserts from the preferred manufacturers can be sourced separately to match the machining task. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
30mm Solid Drill 60mm Cutting Length 151mm Overall Length, 32mm Shank - Teknik Makina
Take advantage of a robust indexable insert drilling system that combines a stable 30 mm cutting diameter with a 60 mm effective cutting length for consistent hole quality and reduced tool change frequency. Order the tool directly via Metav Werkzeuge or consult the technical team for application-specific advice. Teknik Makina U128TM indexable insert drill — 30 mm, 32 mm shank The U128TM indexable insert drill is a precision drilling solution designed for medium‑depth holemaking in workshop and production environments, offering repeatable results with replaceable inserts. 30 mm nominal diameter for stable holemaking 60 mm cutting length for medium‑deep drilling Compatible with Korloy WCM‑06T3 indexable inserts 32 mm robust shank, 151 mm overall length Reliable hole quality and reduced cycle variation The tool body is engineered to deliver consistently concentric holes, making it suitable where repeatability matters. With a 30 mm diameter and 60 mm cutting length, the geometry maintains rigidity through the cut, which reduces deflection and improves surface finish on successive holes. The design reduces the need for rework and supports higher first‑pass yield rates, translating into measurable process stability on typical machining centres. Fast reconditioning through an indexable insert system Equipped to accept indexable inserts, the drill eliminates lengthy regrinding cycles: worn cutting edges are restored immediately by replacing or indexing inserts. The compatibility with Korloy WCM‑06T3 inserts means cutting edge changes are straightforward and predictable. For production shops this reduces machine downtime and toolroom workload, while preserving consistent cutting performance without complex re‑setting procedures. Secure clamping and machine compatibility for reliable runs A 32 mm shank and a 58 mm shank length provide a secure clamping interface that is suited to common toolholders and adaptors, while the 151 mm overall length balances reach with stiffness. The compact mass of 0.755 kg contributes to stable spindle dynamics and lower vibration during drilling. This combination supports stable chip evacuation and extended insert life when used within recommended spindle speeds and feeds. Practical workshop advantages and supply reassurance The modular nature of the drill makes stocking economical: fewer complete bodies are needed when inserts are used, simplifying logistics and lowering inventory carrying costs. The tool’s robust construction and clear interface for Korloy inserts make it a pragmatic choice for production environments seeking dependable performance and straightforward maintenance routines. Metav Werkzeuge’s European distribution ensures transparent delivery and a consistent quality filter for purchasers. Contact Metav Werkzeuge today for specific application guidance on the U128TM indexable insert drill and to confirm availability from Emmerich for your next production run Technical data Article number: U128TM Manufacturer: Teknik Makina Type: Indexable insert drill (translated from "Vollbohrer") Diameter: 30 mm Cutting length: 60 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 151 mm Weight: 0.755 kg Core data Nominal diameter: 30 mm Effective cutting length: 60 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 151 mm Weight: 0.755 kg Special features Compatible insert type: WCM‑06T3 Compatible insert manufacturer: Korloy Indexable insert system for quick edge changes FAQ Which inserts fit the drill? The drill accepts WCM‑06T3 indexable inserts; Korloy is listed as the compatible insert manufacturer for reliable fit and predictable cutting geometry. What are the key dimensions to check for machine compatibility? Check the 32 mm shank and the 58 mm shank length against the toolholder; the 151 mm overall length also determines reach and clearance in the machine setup. Is the tool suitable for deep hole drilling? The tool is optimised for medium‑depth applications with a 60 mm cutting length; for deeper holes, tool extension and rigidity should be evaluated alongside cutting data. How does the indexable design affect workshop logistics? Using indexable inserts reduces the need to replace entire tools; worn edges are replaced quickly, lowering inventory of complete bodies and minimising machine downtime. What is the article number or SKU for ordering? The article number / SKU for ordering is U128TM; reference this when requesting the tool or compatible inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
30mm Solid Drilling Head 90mm Cutting Length, 58mm Shank Length - Teknik Makina
Benefit from a dependable drilling solution that combines robust shank stability and extended cutting reach: 30 mm cutting diameter with a 90 mm cutting length and a 32 mm shank deliver repeatable hole quality and reduced setup time. Order the solid drill directly via Metav Werkzeuge or ask our consultants if needed Teknik Makina solid drill – 30 mm Ø, 90 mm cutting length The Teknik Makina solid drill is a heavy-duty, indexable-insert drill designed for precise production drilling where tool change speed and repeatability matter 30 mm cutting diameter 90 mm cutting length 32 mm shank diameter Compatible with SPMG 0904 inserts Engineered for precise, repeatable holes and robust clamping This solid drill is built around a stout 32 mm shank and a substantial overall length of 181 mm, providing the stability needed in serial production and machining centres. The 90 mm cutting length allows deeper hole-making without resorting to stepped operations, which reduces handling time and potential alignment errors. Using an indexable insert concept with SPMG 0904 inserts keeps maintenance straightforward: worn inserts are replaced rather than the whole tool, cutting downtime and tool inventory costs. The tool’s mass (approx. 0.823 kg) contributes to vibration damping, which supports consistent hole geometry and prolongs insert life. Designed for efficient workshop and CNC workflows Manufactured for compatibility with mainstream insert suppliers such as Taegutec and YG-1, the drill integrates into common production toolsets with minimal adaptation. The insert-type system ensures rapid cutting-edge renewal and consistent cutting parameters across shifts, improving throughput and reducing scrap rates. The combination of a standard 32 mm holder and the common SPMG 0904 insert form factor simplifies procurement and ensures access to replacement parts. For operations requiring predictable cycle times and low tool-change overhead, this design provides a measurable contribution to process efficiency. Reliability, supply and the Metav promise for practical precision Sourcing through Metav brings the practical advantage of a European distribution node that acts as a quality filter for workshop products. The supply chain reliability and technical consultancy available from Metav support seamless integration of the drill into production processes. By choosing tools that match common insert standards and robust shank geometry, teams gain a pragmatic balance between performance and cost control, backed by proven availability and straightforward logistics from an experienced precision partner Secure production-ready drilling performance with the Teknik Makina solid drill — contact Metav Werkzeuge in Emmerich for personalised technical advice and prompt dispatch at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U830TM Manufacturer: Teknik Makina Product name: solid drill / Vollbohrer Numbers / Core technical data Diameter: 30 mm Overall length: 181 mm Cutting length: 90 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 0.823 kg Designs / Special features Compatible inserts: SPMG 0904 Compatible with Taegutec, YG-1 inserts Indexable-insert drilling system Solid drill suitable for production environments FAQ Which inserts fit this drill? The solid drill accepts SPMG 0904 indexable inserts; compatible suppliers include Taegutec and YG-1 for a wide range of grades. What are the main dimensions and drilling reach? The tool offers a 30 mm cutting diameter, 90 mm cutting length and an overall length of 181 mm for extended drilling reach. What is the shank size and how is it clamped? Shank diameter is 32 mm with a shank length of 58 mm, providing stable clamping in standard toolholders. Is this drill suitable for CNC serial production? Yes, the indexable-insert concept and robust shank geometry make the tool well suited to CNC production for repeatable, high-throughput operations. How do insert changes affect uptime? Using replaceable SPMG 0904 inserts allows fast edge renewal, which reduces machine downtime compared with regrinding or replacing solid-tip tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
31mm Core Drill 93mm Cutting Length 58mm Shank Length, 32mm Shank Diameter - Teknik Makina
Benefit from a stable 32 mm shank and an effective 93 mm cutting length that deliver consistent medium‑diameter holes with reduced set‑up time; order the indexable drill body U172TM directly via Metav Werkzeuge or ask our consultants for tailored advice. U172TM indexable drill body — Ø 31 mm, 93 mm cutting length (Teknik Makina) The U172TM indexable drill body is an engineered solution for efficient, repeatable drilling with Korloy insert compatibility, designed for production and workshop environments that demand quick insert changes and stable clamping Indexable system for fast insert change Ø 31 mm for medium‑diameter holes 93 mm effective cutting length 32 mm shank for secure clamping Precision and productivity on the shop floor The U172TM combines a Ø 31 mm cutting diameter with a 93 mm cutting length to balance reach and rigidity, making it suitable for repetitive drilling tasks where consistent hole size and tool life matter. The 32 mm shank provides secure clamping in standard holders, reducing vibration and improving hole quality. Compatibility with industry inserts ensures that the system performs predictably across batches, so setups remain efficient and scrap is minimised. The constructive choices support a higher material‑removal rate while maintaining dimensional stability. Fast insert changes for lower machining costs This indexable design accepts WCM‑06T3 inserts, allowing rapid insert change without the need to regrind solid drills. The insert system reduces tool preparation time and cuts down on downtime between operations; worn cutting edges are replaced in seconds, not hours. Using standard Korloy inserts also simplifies stock management and offers flexibility in selecting grade and coating for different workpiece conditions. The result is a practical route to lower running costs and predictable machining cycles. Consistent integration and robust handling With an overall length of 185 mm and a clamping length of 58 mm, the tool balances accessibility and stiffness for typical production setups. The unit weight of 0.872 kg reflects a robust construction that contributes to steady performance under load. Its design is straightforward to integrate into existing toolholders and machining programmes, supporting efficient tool‑change routines and repeatable pocketing. Clear compatibility with Korloy inserts simplifies procurement and long‑term maintenance planning for the workshop. For reliable indexable‑drilling solutions from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for personalised technical advice and rapid supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U172TM Manufacturer: Teknik Makina Designation: Vollbohrer (indexable drill body) Insert manufacturer compatibility: Korloy Compatible insert type: WCM‑06T3 Core technical data Diameter: 31 mm Overall length: 185 mm Cutting length: 93 mm Shank diameter: 32 mm Clamping length: 58 mm Weight: 0.872 kg Special features Indexable insert system Quick insert replacement Designed for secure clamping and repeatable drilling FAQ Which insert type fits this drill body? The U172TM indexable drill body accepts WCM‑06T3 inserts and is specified for Korloy‑type indexable cutting tips. What is the effective cutting length? The tool provides an effective cutting length of 93 mm, giving extended engagement while retaining rigidity. What shank size and clamping length are required? A 32 mm shank diameter with a clamping length of 58 mm is provided to ensure stable mounting in common toolholders. Is the tool compatible with Korloy inserts? Yes — the design is compatible with Korloy inserts, specifically the WCM‑06T3 grade and form. What is the SKU and overall length of the tool? SKU U172TM has an overall length of 185 mm and a unit weight of 0.872 kg for easy planning of tool balances and handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
31mm Solid Carbide Boring Bar 124mm Cutting Length, 58mm Shank Length - Teknik Makina
Combining a stable 31 mm cutting diameter with a 124 mm effective cutting length and a 32 mm shank yields a reliable drill solution that reduces tool change frequency and maintains hole quality; order directly via Metav Werkzeuge or consult the technical advisors for specification matching. Indexable insert drill body U631TM — 31 mm diameter, 32 mm shank (Teknik Makina) Indexable insert drill body U631TM for precision holemaking in CNC applications, designed for use with industry-standard indexable inserts and rigid toolholders 31 mm cutting diameter 124 mm effective cutting length 32 mm shank diameter Compatible with Korloy WCM-06T3 inserts 216 mm overall length Precision that reduces rework and preserves cycle time The U631TM drill body combines a large cutting diameter with an extended cutting length to deliver consistent results across longer holes. The 31 mm nominal diameter and 124 mm cutting length mean fewer tool passes on deep holes, which helps to reduce set-up time and minimises the risk of cumulative errors. As an indexable insert system, only the worn insert requires replacement when cutting edges dull; the body remains in service, lowering consumable costs and simplifying maintenance logistics. The result is measurable process stability and a reduced incidence of rework in serial production. Rapid insert changes and standardised clamping for minimal downtime Maintenance routines are simplified by the compatibility with WCM-06T3 inserts from Korloy and a standardised 32 mm shank. The 58 mm mounting length secures the tool reliably in common holders, supporting repeatable concentricity and faster set-up. Spare-part inventories benefit from this standardisation: keeping a small stock of replacement inserts allows immediate edge renewal without the need for full-tool replacement. Overall, the modular concept promotes throughput continuity and lowers the effective cost per hole in medium-volume production environments. Robust dimensions and stable cutting behaviour for predictable tool life With an overall length of 216 mm and a mass of approximately 0.981 kg, the tool exhibits a balance between reach and rigidity that helps to control runout and vibration in ordinary machining conditions. The distinction between cutting length and total length ensures the active zone is optimised while the shank provides secure clamping. These dimensional details are crucial: correct clamping and appropriate holder selection preserve the geometry of the cutting edge, which in turn supports consistent surface quality and longer insert life. Technical teams unfamiliar with insert tooling will find the terms straightforward once the benefits of replaceable cutting edges are considered. Streamlined procurement and technical backing from Metav Sourcing the U631TM through Metav Werkzeuge links the tool to a distribution partner that stands for dependable supply and domain expertise. Metav’s Emmerich location acts as a quality filter for the European market, supporting a broad offering that reduces supplier complexity. The commercial advantage is practical: centralised procurement from a partner with decades of industry experience and a wide product range simplifies stocking decisions and ensures faster replenishment. For complex specifications or integration into existing toolsets, Metav’s technical advisors can offer application-focused guidance and help align the drill body with production goals. Contact Metav Werkzeuge today for tailored technical advice on the Teknik Makina U631TM indexable insert drill body and reliable supply from Emmerich – eMail info@metav-werkezeuge.com or call +49 2822 7131930 Technical data Article number: U631TM Manufacturer: Teknik Makina Designation: Indexable insert drill body (Vollbohrer) eClass: 21180201 Core measurements Cutting diameter: 31 mm Effective cutting length: 124 mm Shank diameter: 32 mm Mounting length: 58 mm Overall length: 216 mm Weight: 0.981 kg Special features Compatible insert type: WCM-06T3 Compatible insert manufacturer: Korloy Indexable insert system for edge replacement Files linked for reference: 2 items FAQ Which insert type fits this drill body? The drill body accepts WCM-06T3 indexable inserts; Korloy is the specified insert manufacturer for this configuration. What are the key dimensions to check for holder compatibility? Check the 32 mm shank diameter and the 58 mm mounting length to ensure secure clamping in the chosen toolholder. How does the indexable system reduce operating costs? With the indexable concept used in the U631TM, only the worn insert needs replacement, which reduces consumption of complete tools and lowers cost per hole over time. Is the drill body suitable for deep-hole applications? The 124 mm effective cutting length and 216 mm overall length offer extended reach; suitability for a specific deep-hole task should be validated against machine and holder rigidity. How is runout and hole quality maintained? Consistent clamping on the 32 mm shank and correct holder selection help control runout; replacing inserts when edge wear appears keeps hole quality stable. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
31mm Solid Carbide Through Drill 93mm Cutting Length, 32mm Shank - Teknik Makina
Engineered for reliable indexable holemaking: robust shank stability and simple insert replacement ensure predictable tool life and lower running costs. Order via Metav Werkzeuge for assured European stock and consult their specialists for application guidance. Teknik Makina indexable drill body U831TM – Ø31 mm, 32 mm shank The Teknik Makina indexable drill body U831TM is a heavy-duty indexable drilling solution for industrial holemaking, designed for use with SPMG 0904 inserts in production and workshop environments. Ø31 mm drilling diameter, 93 mm cutting length 32 mm shank for secure clamping Compatible with SPMG 0904 indexable inserts Robust 185 mm overall length, industrial weight 0.884 kg Consistent hole quality for production runs The indexable drilling concept delivers repeatable results and cost efficiency by allowing the cutting edges to be replaced independently of the tool body. Built around the SPMG 0904 insert format, this indexable drill body provides a predictable cutting cycle and reduced per-hole tooling expense compared with solid-carbide alternatives. In many batch and continuous operations the modular design leads to lower inventory value of cutting edges and simpler tool management, while maintaining the dimensional accuracy required for industrial components. Secure clamping and dimensional stability Critical dimensions are provided for machine setup and process planning: Ø31 mm nominal diameter, 93 mm cutting length, 32 mm shank, 58 mm shank length, and 185 mm overall length, with a mass of 0.884 kg. The 32 mm shank is intended for rigid fixture in standard toolholders and is clamped to minimise runout; the specified cutting length supports extended reach without compromising stability. The indexable design is engineered so that the insert pocket and clamping interface are the primary wearing elements, enabling cost-effective maintenance and predictable tool offsets for CNC programmes. Workflow advantages, compatibility and supply Compatibility with leading insert manufacturers such as Taegutec and YG-1 widens the choice of grades and geometries, allowing optimisation for materials and cutting conditions. The indexable drill body supports rapid insert changes, reducing downtime and easing maintenance routines in busy workshops. Supplied from Metav Werkzeuge’s European stock, the tool is positioned for reliable availability and straightforward procurement within industrial supply chains, supporting stable production planning and timely replenishment of cutting edges. For tailored technical advice or to secure supply of the Teknik Makina U831TM indexable drill body from Metav Werkzeuge, contact the Emmerich team by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request a quotation or application recommendation. Technical data SKU: U831TM Manufacturer: Teknik Makina Product type: Indexable drill body Insert type: SPMG 0904 Compatible insert makers: Taegutec, YG-1 Numbers / Core technical data Diameter: 31 mm Cutting length: 93 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 185 mm Weight: 0.884 kg Special features Indexable design for replaceable cutting edges Compatible with SPMG 0904 indexable inserts Suitable for industrial drilling applications FAQ Which insert format does this tool use? The Teknik Makina U831TM indexable drill body is designed for SPMG 0904 inserts and accepts compatible grades from insert makers such as Taegutec and YG-1. What are the key dimensions for machine setup? For setup, note the U831TM features a 31 mm diameter, 93 mm cutting length, 32 mm shank diameter and a total length of 185 mm. Is the shank suitable for standard toolholders? The tool is supplied with a 32 mm shank intended for secure clamping in standard industrial toolholders and collet systems. How does the indexable design benefit workshop operations? The indexable drill body reduces running costs and downtime by allowing inserts to be changed independently of the tool body, which simplifies inventory and maintenance for repetitive drilling tasks. Can the tool be used with different insert grades? Yes, the U831TM supports a range of insert grades available for SPMG 0904, enabling optimisation for various workpiece materials and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
31mm Solid Drill 62mm Cutting Length 58mm Shank Length 154mm Overall Length - Teknik Makina
Take advantage of the U130TM’s combination of a 31 mm cutting diameter, a 32 mm precision shank and a 62 mm cutting length to keep drilling cycles stable and predictable; order the tool via Metav Werkzeuge or consult the specialists for application advice. U130TM Indexable Drill Body (31 mm / 32 mm shank) by Teknik Makina The U130TM indexable drill body provides a compact, high‑stability solution for insert drilling where consistent hole quality and quick insert changes are required Robust 31 mm body for industrial drilling 32 mm precision shank for secure clamping 62 mm cutting length for deeper holes Compatible with Korloy WCM-06T3 inserts Consistent hole quality through rigid design and measurable stability The U130TM is engineered with a focus on precision and repeatability: a 31 mm cutting diameter combined with a 32 mm shank reduces deflection under load and keeps runout low. The 62 mm effective cutting length gives a controlled engagement for many common drilling tasks while the tool’s mass and geometry contribute to stable chip formation. For production environments this translates into fewer rejects and a predictable hole finish, which supports planning and quality control in the workshop. Faster production cycles thanks to the indexable insert concept The modular, indexable system accepts WCM-06T3 inserts and is listed as compatible with Korloy indexable plates, allowing worn edges to be restored instantly by indexing or replacing a small insert rather than regrinding a complete tool. Reduced tool change time and lower maintenance complexity lead to improved machine uptime and simplified logistics for tooling inventories. The insert interface is designed to maintain positional accuracy so process stability is retained after each service action. Simple integration with common toolholding and machining setups Measured dimensions support easy integration: a 32 mm shank diameter and 58 mm holder engagement length ensure secure clamping in standard holders, while the total length of 154 mm provides the reach required for many spindle or turret arrangements. The compact footprint and defined mass help to balance dynamic behaviour during acceleration and deceleration phases, which is beneficial for high‑speed machining centres and turret lathes that demand steady tool performance. Workshop supply, expertise and reliable sourcing from Metav Selection of the right tool is supported by Metav’s technical know‑how and supply chain: the company operates a quality filter from Emmerich and offers a broad range of workshop tooling alongside pragmatic logistics. For complex applications, technical documentation, or to verify insert availability for a specific material or cycle, Metav’s team can provide measured assistance and documented specifications to aid process planning and procurement. Contact Metav Werkzeuge for a tailored technical consultation on the U130TM indexable drill body — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: U130TM Manufacturer: Teknik Makina Product type: Indexable drill body Compatible insert type: WCM-06T3 Compatible insert manufacturer: Korloy Key measurements Cutting diameter: 31 mm Shank diameter: 32 mm Cutting length: 62 mm Holder engagement length: 58 mm Overall length: 154 mm Weight: 0.775 kg Materials & compatibility Indexable insert system Korloy insert compatibility Designed for standard 32 mm shank holders FAQ Which inserts are required for the U130TM? The U130TM accepts WCM‑06T3 inserts; Korloy WCM‑06T3 plates are confirmed compatible with this drill body. What shank size must the holder accept? The holder must accept a 32 mm shank; the U130TM has a 32 mm precision shank for secure clamping. How deep can the U130TM cut effectively? The U130TM provides a 62 mm cutting length with a total length of 154 mm for sufficient reach in many setups. Is the U130TM suitable for short‑cycle production runs? Yes — the indexable insert concept on the U130TM supports quick insert changes, reducing downtime in short‑cycle and batch production. What machines is the U130TM intended for? The U130TM is designed for integration in machining centres and turret lathes that accommodate a 32 mm shank and require indexable insert solutions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
31mm Solid Drill 62mm Cutting Length 58mm Shank Length, 32mm Shank Diameter - Teknik Makina
Take advantage of a robust indexable solution that combines quick insert changes, proven compatibility with major insert brands and a compact, rigid design for steady holemaking; order directly via Metav Werkzeuge or request tailored advice from our consultants. Indexable Insert Drill U931TM – Ø 31 mm, 62 mm cutting length (Teknik Makina) The Indexable Insert Drill U931TM is a precision drill body intended for industrial holemaking with replaceable SPMG 0904 inserts, suited to production environments requiring fast tool changes and consistent results Compatible with SPMG 0904 inserts Ø 31 mm cutting diameter 62 mm cutting length 32 mm shank, 58 mm clamping length Faster production through indexable inserts and reduced downtime The use of indexable inserts means only the cutters need replacement, reducing tool-change time and inventory costs while maintaining process stability. Compatibility with well-known insert families such as SPMG 0904 and support for brands from Taegutec and YG-1 ensures access to a wide range of grades and chipbreakers. This configuration is particularly effective in medium-to-high volume drilling operations where quick recovery after wear is crucial for keeping cycle times low and output consistent. Stable holemaking with a compact, rigid design A robust drill body with a Ø 31 mm cutting diameter and 62 mm cutting length provides a balance between reach and rigidity for repeatable hole quality. The 32 mm shank and 58 mm clamping length contribute to secure mounting and reduced vibration, while the overall length of 154 mm offers a practical working envelope for many machining centres. The relatively low mass (approx. 0.766 kg) supports rapid spindle acceleration and stable cutting dynamics, which together help to improve hole tolerances and surface finish. Simple maintenance and predictable tool life Replacing worn cutters rather than the complete tool body simplifies workshop logistics and cuts tooling costs over time. The drill body accepts standard triangular inserts, allowing the machining process to be tuned by selecting grades for different materials or cutting conditions. With its straightforward clamping arrangement and proven insert format, the tool is suited for systematic preventive maintenance strategies and reduces unplanned production stops, supporting a smoother manufacturing flow. For availability, technical matching or delivery from Teknik Cutting Tools components, contact Metav Werkzeuge for personalised advice and supply coordination — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U931TM Manufacturer: Teknik Makina Product name: Indexable insert drill (Vollbohrer) Model reference: U931TM Weight: 0.766 kg Core specifications Diameter: 31 mm Cutting length: 62 mm Overall length: 154 mm Shank diameter: 32 mm Shank/clamping length: 58 mm Features / Compatibility Suitable for indexable inserts type SPMG 0904 Compatible with inserts from Taegutec and YG-1 Designed for industrial drilling with replaceable cutters FAQ Which insert type fits this drill body? The drill body accepts SPMG 0904 indexable inserts, offering a common triangular format for flexible grade selection. Is the shank compatible with standard holders? The 32 mm shank diameter and 58 mm clamping length are designed for common toolholders used in machining centres and lathes. What is the effective cutting reach of the tool? The tool provides a cutting length of 62 mm within an overall length of 154 mm, suitable for medium-depth holemaking. Which brands of inserts can be used? Insert compatibility includes grades and manufacturers such as Taegutec and YG-1, enabling selection according to material and cutting conditions. How does this tool reduce workshop downtime? By using replaceable inserts, only the cutters are exchanged when worn, which shortens maintenance time and lowers spare-part inventory requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
31mm Solid Drill, 124mm Cutting Length, 32mm Shank - Teknik Makina
Take advantage of a tool that combines dependable insert compatibility, a substantial 31 mm cutting diameter and a long 124 mm cutting length to keep machining cycles productive and predictable; order the Indexable Insert Drill directly via Metav Werkzeuge or consult our specialists for application-specific advice. Indexable Insert Drill U731TM – Ø 31 mm, SPMG 0904 compatible (Teknik Makina) The Indexable Insert Drill U731TM is a production-oriented drilling solution for machining centres and toolholders that accept a 32 mm shank, offering extended cutting reach and secure clamping for repeatable bore quality. SPMG 0904 insert compatibility 31 mm cutting diameter for deep holes 124 mm effective cutting length 32 mm shank, 58 mm clamping length Efficient material removal with indexable inserts The use of indexable inserts delivers a cost-effective approach to repeated drilling tasks: the replaceable SPMG 0904 inserts minimise downtime compared with solid-carbide alternatives and allow quick reconditioning of the cutting edge. With a 31 mm diameter and a 124 mm cutting length, this tool is optimised for longer bores where sustained chip removal and thermal management are essential. The insert system also enables straightforward changeover of grades for different materials, supporting consistent cycle times and predictable tool life in a high-volume production environment. Compatibility that protects uptime Compatibility with major insert manufacturers such as Taegutec and YG-1 reduces supply-chain friction and simplifies toolroom logistics; matching insert stocks can be sourced from multiple suppliers without changing the holder. The combination of standard insert formats and a robust shank arrangement reduces setup complexity and the risk of extended downtime. For operations seeking predictable throughput, the ability to use widely available inserts delivers a clear economic advantage while keeping maintenance cycles short and controlled. Stable clamping for repeatable bore accuracy A 32 mm shank with a 58 mm clamping length provides secure retention in conventional toolholders, improving concentricity and minimising runout during drilling operations. The substantial overall length of the tool gives flexibility for deeper operations while the balanced design supports steady chip evacuation and stability, which in turn preserves insert life and reduces scrap rates. The tool’s near 1 kg mass contributes to steadiness in the cut without excessive inertial load on the machine spindle, aiding consistent bore quality across serial production runs. For precision drilling applications with Teknik Cutting Tools quality, contact Metav Werkzeuge for tailored insert recommendations, availability checks and technical guidance from our Emmerich-based team. Technical details SKU: U731TM Brand: Teknik Makina Insert type: SPMG 0904 Core technical data Diameter: 31 mm Cutting length: 124 mm Shank diameter: 32 mm Shank clamping length: 58 mm Overall length: 216 mm Weight: 0.974 kg Design & features Indexable inserts compatible Compatible with Taegutec and YG-1 inserts For machining centres and standard holders Robust shank for improved concentricity FAQ Which inserts fit this drill? The U731TM accepts SPMG 0904 indexable inserts; insert grades from Taegutec and YG-1 are compatible. What are the key dimensions to check for toolholder fit? Shank diameter 32 mm and clamping length 58 mm are the critical dimensions for holder compatibility. How deep can this drill cut effectively? The tool offers a cutting length of 124 mm with an overall length of 216 mm, suitable for extended bore operations. Is the insert included with delivery? Insert supply is not specified in the product data; confirmation of included items should be obtained via the product listing or Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
31mm Solid Drilling Head 155mm Cutting Length 32mm Shank, 216mm Overall Length - Teknik Makina
Take advantage of a robust, indexable design with a 31 mm diameter and 155 mm cutting length to achieve consistent hole quality and reduced tooling costs through replaceable inserts; order directly via Metav Werkzeuge or consult our specialists for application data. Indexable Insert Drill U791TM — Teknik Cutting Tools — 31 mm, 155 mm cutting length The Indexable insert drill U791TM is an industrial-grade holemaking tool designed for deep and stable drilling operations in machining centres and heavy-duty lathes, compatible with Korloy WCM‑06T3 inserts. 31 mm cutting diameter for medium holes 155 mm cutting length for deeper bore operations Compatible with Korloy WCM‑06T3 inserts 32 mm shank for high rigidity Maximise productivity with a replaceable-insert solution The indexable design combines the cost benefits of replaceable inserts with the performance of a solid drilling system. By using Korloy WCM‑06T3 inserts, the tool reduces downtime for regrinding and lowers per-hole costs while maintaining consistent cutting quality. The 155 mm cutting length permits deeper bores without compromising stability, and indexed tips allow quick replacement to restore cutting geometry and extend tool life. Rigidity and stability engineered for repeatable precision A firm connection is achieved through the 32 mm shank, providing increased torsional stiffness and better vibration damping compared with smaller holders. The result is improved hole roundness and repeatability across production batches. The tool’s overall length of 216 mm and well-proportioned shank-to-cutting-length ratio support secure clamping and predictable chip evacuation, which is essential for maintaining tolerances in serial manufacturing. Practical benefits for workshop and production planners The combination of an indexable concept and a substantial cutting length supports flexible process planning: inserts can be selected for specific materials, and worn tips replaced without discarding the whole toolbody. The design improves cost-efficiency for medium-run and long-run production, enabling quicker tool changes and predictable maintenance schedules — a clear advantage for operations seeking steady throughput and lower tooling overhead. Compatibility and application overview for material choices This drilling solution accepts Korloy turning inserts WCM‑06T3, simplifying procurement and compatibility with established insert stocks. With a 31 mm diameter and 155 mm cutting length, the tool is suitable for conventional steels and a range of common workshop materials when combined with appropriate insert grades and cutting data. The robust construction and measured mass support controlled feeds and speeds for improved surface finish and dimensional integrity. For technical procurement or to discuss how Teknik Cutting Tools’ indexable drill U791TM can reduce cycle times and tooling costs, contact Metav Werkzeuge for tailored cutting data and delivery options. Technical data Article number: U791TM Manufacturer: Teknik Makina Product: Indexable insert drill (Vollbohrer) Core measurements Diameter: 31 mm Cutting length: 155 mm Shank diameter: 32 mm Shank length: 58 mm Total length: 216 mm Weight: 1.061 kg Special features Compatible inserts: Korloy WCM‑06T3 Indexable/replaceable cutting tips Designed for industrial drilling operations FAQ What insert type does this drill use? The U791TM drill is specified for Korloy WCM‑06T3 inserts, allowing quick index changes and straightforward insert sourcing. Which shank diameter is required for secure clamping? A 32 mm shank diameter is specified for the U791TM, providing the rigidity needed for repeatable holemaking. How deep can the tool cut reliably? The tool provides a 155 mm cutting length, enabling deeper bore operations while maintaining stability when clamped correctly. Is this drill suitable for mass production? Yes — the indexable insert concept of the U791TM supports efficient insert replacement and predictable maintenance, making it well suited to serial production. What are the overall dimensions and mass of the tool? The U791TM has a total length of 216 mm and a weight of 1.061 kg, designed for balanced handling and stable machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Carbide Through Coolant Indexable Drill 160mm Cutting Length, 58mm Shank Length - Teknik Makina
Take advantage of the combination of Ø 32 mm rigidity, a 160 mm cutting length and direct compatibility with Korloy WCM-06T3 inserts for reliable, repeatable holemaking; order the Vollbohrer directly via Metav Werkzeuge or consult our specialists for application advice. Vollbohrer — indexable-insert drill body, Ø 32 mm, cutting length 160 mm The Vollbohrer is a robust drill body designed for metalworking applications where depth, stability and economical edge replacement are required; suitable for production use with Korloy indexable inserts. Robust drill body for indexable inserts Cutting length 160 mm for deep holes Shank diameter 32 mm, 58 mm shank length Compatible with Korloy WCM-06T3 inserts Consistent deep-hole performance for production environments The indexable-insert drill body delivers a balance of stability and repeatability for series production. With a nominal Ø 32 mm diameter and cutting length 160 mm, the design reduces flex and helps maintain concentricity over extended passes, which translates into fewer reworks and more parts within tolerance. The compatibility with Korloy inserts of type WCM-06T3 enables immediate replacement of worn cutting edges, keeping machine uptime high and tooling costs predictable. Economical machining through replaceable cutting edges Replacing only the insert instead of the complete tool body reduces tooling expenditure and shortens maintenance intervals. The indexable-insert concept used here supports a cost-effective workflow: wear is addressed by swapping WCM-06T3 inserts while the drill body remains in service. This approach simplifies inventory management for high-volume shops and ensures consistent cutting geometry, contributing to steady cycle times and uniform hole quality across batches. Simple integration and reliable clamping on most toolholders The drill body is supplied with a 32 mm shank and a shank length of 58 mm, allowing secure mounting in standard toolholders designed for 32 mm tooling. The substantial mass (approx. 1.126 kg) of the assembly assists vibration damping during interrupted cuts and supports stable cutting at higher feed rates where the process permits. The overall length of 252 mm gives good access for deeper holes while retaining the rigidity needed for accurate machining. For tailored application support on Teknik Makina indexable drill bodies or to procure this Ø 32 mm tool via Metav Werkzeuge, contact Metav Werkzeuge’s specialists in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for precise recommendations and delivery options Technical data SKU: U792TM Manufacturer: Teknik Makina Diameter: 32 mm Cutting length: 160 mm Overall length: 252 mm Shank diameter: 32 mm Shank length: 58 mm Compatible inserts: WCM-06T3 Compatible inserts manufacturer: Korloy Weight: 1.126 kg Facts Diameter (D): 32 mm Cutting length (Lc): 160 mm Overall length (L): 252 mm Shank length: 58 mm Weight: 1.126 kg Special features Indexable-insert drill body Insert type: WCM-06T3 Insert supplier compatibility: Korloy Solid shank design suitable for standard 32 mm holders FAQ Which insert type fits this drill body? The drill body accepts Korloy WCM-06T3 indexable inserts as specified for this U792TM tooling. What are the key dimensions for machine setup? Core dimensions: 32 mm diameter, 160 mm cutting length, overall length 252 mm, and a 58 mm shank length. Is the tool suitable for deep-hole drilling in production runs? Yes, the combination of a long cutting length and a 32 mm shank provides the rigidity and accessibility required for repeated deep-hole operations. How is wear managed with this tooling concept? Wear is managed by replacing the indexable inserts (WCM-06T3), keeping the drill body in service and reducing total tooling cost over time. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Carbide Through Drill 64mm Cutting Length 58mm Shank Length, 156mm Overall - Teknik Makina
Take advantage of a robust tool body that combines reliable compatibility with indexable inserts and compact dimensions for easier tool changeovers; the Ø 32 mm diameter and 64 mm cutting length deliver productive holemaking, while compatibility with common insert suppliers simplifies stocking. Order through Metav Werkzeuge or consult our specialists for machining data and delivery. Indexable Drill Body (Vollbohrer) — Ø 32 mm, 64 mm cutting length — Teknik Makina A indexable drill body designed for efficient, repeatable hole production in machining centres and CNC drilling stations, accepting SPMG 0904 inserts for flexible cutting strategies Ø 32 mm cutting diameter 64 mm cutting length Compatible with SPMG 0904 inserts 58 mm shank length Improve cycle times with standardised inserts and consistent cutting length The modular design of this indexable drill body reduces non-productive time by enabling quick insert changes and predictable cutting performance. With a 64 mm cutting length and a nominal Ø 32 mm, the tool supports stable cutting conditions that favour consistent hole quality. Using standard insert seats for SPMG 0904 means readily available tooling from established suppliers, which aids process planning and shortens replenishment lead times. The result is measurable productivity gains in recurring drilling tasks. Rigidity and setup that support dimensional stability A compact overall length of 156 mm combined with a 58 mm shank improves stiffness at the cutting edge and limits vibration during drilling. The tool’s mass of 0.781 kg contributes to stable spindle dynamics without excessive inertia, which helps maintain roundness and positional accuracy. These mechanical characteristics translate into fewer reworks and better reproducibility when drilling batches of components, supporting tighter tolerances in production runs. Broad compatibility to simplify tool inventories The drill body accepts SPMG 0904 inserts and is listed as compatible with insert manufacturers Taegutec and YG-1, which provides flexibility when selecting grades and geometries for different materials or cutting strategies. The standard 32 mm interface allows integration with common holders and adaptors, reducing the need for bespoke tool-holding solutions. This compatibility helps procurement teams consolidate suppliers while ensuring the shopfloor has access to proven cutting grades. Practical benefits for process reliability and maintenance Standardised inserts and a serviceable holder reduce downtime: worn cutting edges can be exchanged without removing the whole tool, and the repeatable seat geometry supports consistent indexing. The combination of indexable inserts and a stiff tool body supports predictable tool life and easier cost-per-hole calculations. In short, the design focuses on reliable throughput and straightforward maintenance, making it suitable for batch production and mixed-series work where tool change efficiency matters. Contact Metav Werkzeuge for personalised cutting data, delivery options and to secure this Teknik Cutting Tools indexable drill body — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: U932TM Manufacturer: Teknik Makina Product name: Vollbohrer Compatible insert designation: SPMG 0904 Compatible insert manufacturers: Taegutec, YG-1 Facts Diameter: 32 mm Cutting length: 64 mm Shank length: 58 mm Overall length: 156 mm Weight: 0.781 kg SKU: U932TM Special features Indexable insert drill body Accepts SPMG 0904 inserts Compatible with Taegutec and YG-1 insert systems Compact overall length for improved rigidity FAQ What insert type does this drill body use? The drill body is designed for SPMG 0904 inserts; this seat supports a wide range of grades for different materials. Which insert manufacturers are compatible with the tool? Compatibility is confirmed for Taegutec and YG-1, making insert selection flexible for cutting conditions. What are the key dimensions to check for machine setup? Important dimensions are Ø 32 mm diameter, 64 mm cutting length, 58 mm shank length and 156 mm overall length; these determine holder compatibility and overhang. Can the tool reduce downtime compared with solid drills? Yes — the indexable design allows insert changes without replacing the holder, which shortens maintenance intervals and supports continuous production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Drill 128mm Cutting Length, 58mm Shank Length, 1.046kg - Teknik Makina
Efficient holemaking with a 32 mm shank and 128 mm cutting length delivers stable tooling performance and repeatable results; order the Teknik Makina U632TM directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina U632TM — Indexable drill body with 32 mm shank and 128 mm cutting length The U632TM is an indexable drill body engineered for precision holemaking in machining centres and live‑tool lathes, compatible with Korloy WCM‑06T3 inserts. Indexable design for WCM‑06T3 inserts 32 mm shank for rigid clamping 128 mm cutting length for deep holes Robust 1.046 kg body for stable operation High‑efficiency holemaking for production runs The indexable drill body provides a combination of long tool life and straightforward maintenance that supports high‑volume machining. With a 128 mm cutting length and an overall length of 220 mm, the tool is suited to extended reach operations where consistent hole quality is required. The modular nature of the design reduces downtime: worn cutting edges are replaced quickly without discarding the tool body, maintaining productive cycle times and lowering per‑hole costs. Stable clamping and repeatable concentricity A solid 32 mm shank and 58 mm shank length ensure rigid mounting and reduced run‑out, which translates into improved hole geometry and extended insert life. The tool’s mass (approximately 1.046 kg) contributes to vibration damping during drilling operations, so repeatability is enhanced across batches. These characteristics favour setups where dimensional consistency and surface finish are priorities. Economical tooling through indexable inserts Compatibility with Korloy WCM‑06T3 inserts allows focused replacement of cutting edges rather than entire tools, improving cost efficiency in the tooling cycle. The indexable approach supports predictable maintenance intervals and simpler stock management of spare inserts. For operations that require frequent tool changes, the insert system minimises machine downtime and simplifies inventory logistics. Practical application notes and handling The drill body’s 128 mm cutting length and 220 mm overall length make it suitable for deeper hole production where access and chip control are considerations. The combination of shank geometry and robust construction promotes reliable chip evacuation and stable cutting conditions when used within recommended machining parameters. For best results, pair the tool with clamping systems that guarantee concentricity and follow the insert manufacturer’s grade and geometry recommendations. Contact Metav Werkzeuge for a tailored tooling recommendation or to request the cutting data sheet for the Teknik Makina U632TM, shipped from our Emmerich warehouse and supported by our technical consultants Technical data Article number: U632TM Manufacturer: Teknik Makina Designation: Indexable drill (Vollbohrer) Facts Diameter: 32 mm Cutting length: 128 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 220 mm Weight: 1.046 kg Special features Compatible inserts: WCM- 06T3 Compatible insert manufacturer: Korloy Files available: 62de7ec30f56dbb4de4dbf2d, 62de7dd9148ec6b71020ff6b FAQ What type of inserts does this drill body accept? The U632TM accepts WCM‑06T3 indexable inserts; the tool is shown compatible with Korloy insert geometry. Is the shank suitable for rigid clamping systems? Yes, the 32 mm shank is intended for secure clamping to provide stability and reduced run‑out during drilling. How deep can this drill reach effectively? With a 128 mm cutting length and overall length of 220 mm, the tool is designed for moderate to deep holemaking where indexable insert drilling is appropriate. Can worn cutting edges be replaced on site? The indexable concept allows fast replacement of inserts without replacing the tool body, reducing downtime and tooling cost. Is special balancing required for high‑speed applications? Balancing should follow machine and insert manufacturer guidance; the tool’s mass and geometry support stable operation under proper clamping and speeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Drill 64mm Cutting Length 58mm Shank Length, 156mm Overall - Teknik Makina
Take advantage of a robust, indexable-insert drilling solution with consistent chip control and fast insert changes; the 32 mm diameter and 64 mm cutting length combine stability and deep-hole capability. Order directly via Metav Werkzeuge or consult the team for application advice. Indexable-insert drill U132TM by Teknik Makina — 32 mm diameter, 64 mm cutting length An indexable-insert drill U132TM designed for efficient holemaking in metalworking and CNC applications, offering straightforward compatibility with standard insert systems 32 mm nominal diameter for robust drilling 64 mm cutting length for deep hole capability Compatible with WCM-06T3 indexable inserts Solid shank with 58 mm clamping length Stable cutting performance for repeatable hole quality This indexable-insert drill delivers predictable performance through a combination of rigid geometry and an optimised cutting length. The 32 mm nominal diameter and 64 mm cutting length are engineered to balance material removal with axial stability, reducing chatter and improving roundness. With replaceable cutting edges the tool maintains consistent results over long runs, so cycle times are reduced and process stability is improved for production and job-shop environments. Fast tool change and toolholder integration to save setup time Designed with a solid shank and a 58 mm clamping length, this drilling tool integrates easily into common holders and adaptors found on vertical and horizontal machining centres. The 156 mm overall length provides the reach needed for recessed features while keeping runout low. The insert-based concept shortens maintenance intervals: only the insert requires replacement, which lowers tool-change downtime and cuts operating cost per hole compared with monolithic drills. Practical compatibility and productivity advantages for workshops The insert seat accepts WCM-06T3 cutters and is compatible with Korloy supply channels, ensuring replacement cutters are readily available. The indexable approach supports a lean spare-parts strategy and reduces waste from complete-tool disposal. Weighing 0.802 kg, the assembly offers a stable mass for consistent spindle behaviour without imposing excessive load on the tool arbor. For applications that prioritise throughput and predictable tool life, this solution combines durability with economical running costs. For application-specific recommendations or to discuss how the U132TM from Teknik Cutting Tools fits into current machining processes, contact Metav Werkzeuge for technical advice and procurement assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U132TM Manufacturer: Teknik Makina Diameter: 32 mm Cutting length: 64 mm Shank clamping length: 58 mm Overall length: 156 mm Weight: 0.802 kg Indexable-insert design Compatible insert type: WCM-06T3 Compatible insert manufacturer: Korloy Solid shank for standard toolholders FAQ What insert type does this drill use? The U132TM uses the WCM-06T3 indexable inserts; Korloy supplies compatible cutters that fit the insert seats. Is the shank suitable for standard toolholders? Yes. The drill features a solid shank with a 58 mm clamping length intended for common holder systems on machining centres. Can the tool reach recessed holes? With a 156 mm overall length and a 64 mm cutting length, the tool is designed to access moderate recesses while maintaining stability. How does the indexable concept affect operating costs? Using replaceable inserts such as the WCM-06T3 reduces per-hole cost because only the cutting edge is renewed, lowering waste and downtime. Is this product suitable for high-volume production? Yes. The U132TM’s replaceable-insert design and stable geometry make it appropriate for repetitive production runs where consistent hole quality and short tool-change times are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Drill for QC-- 170504 Indexable Inserts 40.5mm Cutting Length, 56mm Shank - Teknik Makina
Take advantage of a modular, service-friendly drilling solution that combines the rigidity of a long shank with compatibility for widely used QC--170504 indexable inserts; reduced tooling costs and predictable machining cycles support uninterrupted production. Order the tool directly via Metav Werkzeuge or ask the consultants for specification help. Indexable drill body for QC--170504 inserts — 32 mm, L112 mm (Teknik Makina) The indexable drill body is intended for industrial drilling tasks where insert changeability, predictable performance and secure fastening are required; ideal for batch production and mixed-material operations. 32 mm working diameter Accepts QC-- 170504 indexable inserts 56 mm shank, 112 mm overall length Exceptional stability and repeatable hole quality for production runs The combination of a 32 mm diameter and a 56 mm shank length delivers axial stability under cyclical loads, which reduces deflection and helps maintain concentricity in serial operations. With a 112 mm overall length and a dedicated 40.5 mm cutting length, the tool provides a clear balance between reach and rigidity: longer reach without sacrificing the clamping support that ensures repeatable hole position and diameter tolerance. For workshop managers and process planners this means fewer reworks and a more consistent output from the machine spindle. Modular insert system to lower running costs and downtimes Designed to accept QC--170504 inserts from Korloy, the tool enables fast tip replacement instead of whole‑body changeover, which reduces consumable spend and inventory variety. The insert pocket is secured by a M3x7 Torx screw compatible with a T8 key for reliable clamping; correct torque and simple replacement procedures keep cycle interruptions minimal. The indexable approach also permits optimised grades and edge geometries to be selected per material, improving tool life and surface finish across mixed production batches. Practical handling and integration on the shop floor At a net weight of 0.356 kg, the component is straightforward to handle during setup and tool changes while remaining substantial enough for vibration damping in many standard spindles. The SKU U043TM and compact labeling simplify tool management and traceability in stores or tool cabinets. Compatibility with common insert systems and the standardised screw interface eases integration into existing toolholders and maintenance routines, supporting steady throughput and predictable lifecycle planning for production tooling. For technical specification matching or to order the Teknik Makina indexable drill body via Metav Werkzeuge, contact Metav's specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a detailed consultation and delivery from Emmerich. Technical Data Article number: U043TM Label: 32mm Vollbohrer QC-- 170504 L112mm Product type: Indexable drill body Manufacturer: Teknik Makina Compatible insert: QC-- 170504 Facts Diameter: 32 mm Overall length: 112 mm Shank length: 56 mm Cutting length: 40.5 mm Weight: 0.356 kg eClass: 21180201 Special features Insert compatibility: QC-- 170504 Insert manufacturer reference: Korloy Fastening: M3x7 Torx screw Torx key size: T8 SKU: U043TM FAQ What insert type does this drill body take? The drill body accepts QC--170504 indexable inserts; Korloy is a confirmed insert manufacturer for this pocket size. What are the key dimensions to check for toolholder compatibility? Check the 32 mm diameter, 56 mm shank length and 112 mm overall length to ensure correct clamping and sufficient reach for the intended operation. How is the insert secured in the pocket? Inserts are clamped with an M3x7 Torx screw, compatible with a T8 key for tightening and replacement. Is this drill body suitable for high-volume production? Yes — the modular insert system and stable shank geometry are designed to support repeatable machining cycles and reduced downtime in serial production. Which SKU should be ordered to obtain this specific configuration? Order SKU U043TM for the 32 mm indexable drill body configured for QC--170504 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Drill for XC-- 170504 Indexable Inserts 133mm Overall Length, 60mm Shank - Teknik Makina
Take advantage of a purpose-built combination of process stability and tooling flexibility: the solid drill body delivers repeatable 32 mm drilling with a long 133 mm overall length and accepts XC-- 170504 indexable inserts. Order the component directly via Metav Werkzeuge or ask the Metav consultants for tailored tooling recommendations. Solid drill body U052TM – 32 mm diameter, 133 mm overall length (Teknik Makina) Solid drill U052TM for indexable-insert drilling in industrial turning and milling centres, designed to accept XC-- 170504 indexable inserts for reliable, repeatable holemaking across production runs 32 mm diameter for deep-hole stability Compatible with XC-- 170504 indexable inserts 133 mm overall length for extended reach Deliver consistent hole quality and secure machining cycles The solid drill body is engineered to support stable drilling with a nominal 32 mm diameter and an extended overall length of 133 mm, which together reduce the need for frequent repositioning in multi-stage fixtures. By combining a steady bore size with a substantial body, the tool helps to minimise vibration and supports consistent hole tolerance across batches. This benefit is particularly relevant in series production and subcontracting where repeatability and process control translate directly into fewer rejects and less rework. The construction emphasises practical process advantages rather than decorative claims, focusing on measurable improvements to machining throughput and part conformity. Tooling flexibility that simplifies inventory and changeovers Compatibility with XC-- 170504 indexable inserts and noted alignment to ISCAR insert standards enables quick insert changes and flexible tooling strategies. Using indexable inserts allows shops to maintain a compact inventory of cutting edges while retaining multiple diameters through modular bodies. The modular approach reduces downtime for regrinding and offers an economical route to maintain cutting performance: worn inserts are swapped, not reworked. This supports lean production practices and reduces the total cost of ownership for cutting tools without compromising on cutting performance. Robust shank and balanced design for secure clamping and handling A 60 mm shank length and a 72 mm cutting length provide a balanced ratio between clamping engagement and effective material removal, supporting confident hold in standard toolholders and adaptors. At approximately 0.812 kg, the assembly supplies tangible mass for damping minor oscillations while remaining manageable for tool changes and inspection. The technical proportions promote even load distribution during drilling, which contributes to extended insert life and reduced toolholder wear. The solid drill U052TM by Teknik Makina is therefore suitable where reliable clamping and predictable cutting behaviour are priorities in daily workshop routines. For precision indexable drilling with XC-- 170504 inserts, contact Metav Werkzeuge for a specification check and supply coordination; Metav’s consultants can advise on holder compatibility and supply the Teknik Cutting Tools component to fit existing setups Technical data Article number: U052TM Product: Solid drill for XC-- 170504 indexable inserts Manufacturer: Teknik Makina ECLASS: 21180201 Label: 32 mm solid drill XC-- 170504 L133 mm Core dimensions Diameter: 32 mm Overall length: 133 mm Shank length: 60 mm Cutting length: 72 mm Weight: 0.812 kg Special features Compatible with XC-- 170504 indexable inserts Compatible inserts manufacturer: ISCAR Solid body design for indexable-insert drilling FAQ What insert type fits this drill body? The drill body accepts XC-- 170504 indexable inserts; it is designed to work with the insert geometry and seating intended for that designation. Is this component compatible with ISCAR inserts? Yes, the tool is specified for compatibility with ISCAR-manufactured inserts and the body geometry aligns with ISCAR XC-- 170504 insert profiles. What are the key mounting dimensions to check for holder compatibility? Check the 60 mm shank length and the overall length of 133 mm to ensure secure clamping and adequate toolholder engagement for the intended setup. How does the cutting length affect application choice? The 72 mm cutting length provides extended reach for deeper bores while keeping sufficient shank engagement for stable clamping; this balances access and rigidity for production drilling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Schnellere Fertigung durch präzise Vollbohrer für industrielle Bearbeitungen
Vollbohrer, auch bekannt als Massivbohrer oder Durchgangsbohrer, sind speziell entwickelte Zerspanungswerkzeuge zum direkten Einbringen von Bohrungen in massives Werkstückmaterial. Sie werden bevorzugt auf Drehmaschinen und Bearbeitungszentren eingesetzt, um in einem einzigen Arbeitsgang große Materialvolumina wirtschaftlich abzutragen.
Effiziente Funktion und technischer Kontext für robuste Anwendungen
In der Praxis ermöglichen Vollbohrer das Bohren ohne vorheriges Zentrieren oder Vorbohren, wodurch Rüstzeiten reduziert werden. Bei Varianten ohne Innenkühlung wird der Kühlschmierstoff über externe Maschinendüsen zugeführt; diese Auslegung ist jedoch nur bei extrem kurzen Bohrtiefen und sehr leicht zerspanbaren Materialien geeignet, da produzierte Späne den Bohrkanal schnell verschließen können. Industrieller Standard sind Vollbohrer mit Innenkühlung: durch den Werkzeugkörper verlaufende Kanäle transportieren das Kühlmittel unter hohem Druck direkt an die Schneiden der Bohrerspitze. Dadurch werden Reibungswärme abgeführt und Spänemengen zuverlässig aus dem Bohrloch gespült, was ein Festklemmen, Riefenbildung und plötzliche Werkzeugbrüche effektiv verhindert.
Optimierte Produktion: Konkrete Vorteile für die Fertigung
- Reduzierte Rüstzeit durch Bohren in einem Arbeitsgang mit Vollbohrer oder Einstufenbohrer.
- Verbesserte Spanabfuhr dank innenliegender Kühlmittelkanäle, die die Standzeit verlängern.
- Minimiertes Bruchrisiko durch gezielte Kühlung und Druckspülung an der Bohrerspitze.
- Höhere Prozesssicherheit bei der Bearbeitung großer Materialvolumina auf Bearbeitungszentren.
- Anpassbar an Maschinentyp: Vollbohrer und Durchgangsbohrer sind für Drehmaschinen und Fräszentren verfügbar.
Metav als starker Partner für Beschaffung und Beratung
Metav fungiert als Qualitätsfilter und bietet mit Sitz in Emmerich ein lückenloses Sortiment für präzise Werkzeuge. Mit über 48.000 Kunden und mehr als 250.000 Produkten reduziert Metav die Lieferantenanzahl und liefert verlässlich an die Werkbank. Das Sortiment umfasst sorgfältig ausgewählte Vollbohrer, Massivbohrer und Durchgangsbohrer sowie Beratung zur richtigen Auslegung von Innenkühlung und Schneidengeometrie.
Kurz und prägnant: Wann Vollbohrer die beste Wahl sind
Für Anwendungen, in denen Bohren in einem Durchgang, sichere Spanabfuhr und maximale Prozesssicherheit gefordert sind, sind Vollbohrer die bevorzugte Lösung. Vollbohrer sowie die Varianten Massivbohrer und Durchgangsbohrer sorgen für effiziente, zuverlässige Bohrprozesse in der Serien- und Einzelfertigung.
FAQ
Was ist der Unterschied zwischen Vollbohrer mit Innenkühlung und ohne Innenkühlung?
Vollbohrer mit Innenkühlung führen das Kühlmittel durch Kanäle im Werkzeugkörper direkt an die Schneide und ermöglichen so effektive Wärmeabfuhr und Spantransport; Varianten ohne Innenkühlung werden von außen über Maschinendüsen gekühlt und eignen sich nur für sehr kurze Bohrtiefen und weiche Materialien.
Warum reduziert die Innenkühlung das Risiko von Werkzeugbruch bei Vollbohrern?
Die Innenkühlung führt das Kühlmittel unter hohem Druck an die Bohrerspitze, wodurch Reibungswärme reduziert und Späne aus dem Bohrloch gespült werden; dadurch werden Festklemmen und riefenbildung vermieden, was Werkzeugbrüche verhindert.
Auf welchen Maschinentypen werden Vollbohrer typischerweise eingesetzt?
Vollbohrer und ihre Synonyme Massivbohrer sowie Durchgangsbohrer werden hauptsächlich auf Drehmaschinen und Bearbeitungszentren eingesetzt, dort ermöglichen sie das wirtschaftliche Abtragen großer Materialmengen in einem Arbeitsgang.
Wie unterstützt Metav bei der Auswahl des passenden Vollbohrers?
Metav bietet ein umfangreiches Sortiment und fachkundige Beratung aus Emmerich; Kunden profitieren von Produktauswahl, technischen Informationen zur Innenkühlung und Empfehlungen für die passende Schneidengeometrie.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com