Vollbohrer für effizientes Tiefbohren in Massivwerkstoff
Vollbohrer ermöglichen das direkte Einbringen von Bohrungen in Massivwerkstoff und sparen durch den Einsatz auf Drehmaschinen und Bearbeitungszentren wertvolle Prozesszeit, indem sie große Materialvolumina in einem Arbeitsgang abtragen; dabei bietet die Variante mit Innenkühlung die notwendige Kühlmittelzufuhr, um hohe Reibungswärme abzuführen und Späne sicher aus dem Bohrloch zu spülen, während Ausführungen ohne Innenkühlung nur für sehr kurze Bohrtiefen und leicht zerspanbare Materialien geeignet sind; als Synonyme gelten Massivbohrer und Vollkernbohrer, die in der Zerspanung vor allem durch ihre Standzeit und Prozesssicherheit überzeugen.
25.5mm Solid Drill 75mm Cutting Length, 56mm Shank Length - Teknik Makina
Combining precise indexable capability for Korloy WCM-0503 inserts with a 25.5 mm cutting diameter and a 75 mm effective cutting length, this insert drill body supports consistent holemaking and reduced changeover times. Order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Insert Drill U161TM — indexable insert drill body, 25.5 mm diameter, Teknik Makina The Insert Drill U161TM is an indexable drilling solution designed for production tooling and CNC applications, offering a compact overall length and a robust shank interface for stable clamping Indexable drill body for WCM-0503 inserts 25.5 mm cutting diameter 75 mm effective cutting length Robust 25 mm shank, 158 mm overall Consistent drilling performance for production work The U161TM is engineered to support repeatable hole quality across medium- to long-run operations. With a 25.5 mm cutting diameter and a 75 mm cutting length, the design balances rigidity and reach to reduce deflection in typical drilling cycles. The combination of a substantial 25 mm shank and a 158 mm overall length maintains stable clamping in standard toolholders, which contributes to consistent concentricity and predictable process windows. Where cycle time and part tolerances are critical, the indexable concept removes the need for frequent full-tool replacement and shortens machine downtime. Designed for fast insert changes and dependable clamping Compatibility with Korloy WCM-0503 indexable inserts ensures quick tip replacement and predictable cutting geometry. The insert interface is designed to allow rapid indexing and secure seating, reducing setup time when multiple holes or different coatings are required. A 56 mm holder engagement length gives a clear datum for tool change systems and supports firm axial support in collets or hydraulic chucks. The result is lower fixture time, easier maintenance of cutting edges and a straightforward path to repeatable production results with minimal operator intervention. Reliability and supply advantages from Metav Sourcing through Metav Werkzeuge brings a transparent supply chain and practical technical support from a European distribution hub. Metav’s inventory and quality-filter approach streamlines procurement for workshops and industrial buyers, while the company’s extensive product range helps reduce supplier overhead. For purchasers seeking tooling that fits existing machining strategies, the insert drill body integrates with standard indexable workflows and benefits from Metav’s stock visibility and logistics centred in Emmerich, ensuring dependable delivery and traceable quality throughout the purchasing process. For availability, technical integration guidance or to request a quotation for the Teknik Makina U161TM insert drill body, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific requirements Technical data Article number: U161TM Manufacturer: Teknik Makina Facts Diameter: 25.5 mm Cutting length: 75 mm Shank diameter: 25 mm Shank engagement length: 56 mm Overall length: 158 mm Weight: 0.49 kg Special features Compatible with Korloy WCM-0503 inserts Indexable insert drill body design Suitable for production and CNC toolholders FAQ Which inserts fit this drill body? This insert drill body is compatible with WCM-0503 indexable inserts; Korloy inserts are specified for the standard seating and geometry of the U161TM. What are the key dimensions of the U161TM? The U161TM features a 25.5 mm cutting diameter, 75 mm cutting length, 25 mm shank diameter and a total length of 158 mm. What clamping interface is required? The tool uses a 25 mm shank with a 56 mm engagement length suited to standard holders and systems that accept this shank diameter. Is the insert drill body designed for quick tip replacement? Yes — the indexable design allows rapid insertion and indexing of WCM-0503 inserts, reducing changeover time and simplifying maintenance. How heavy is the U161TM and what is its SKU? The U161TM weighs approximately 0.49 kg and is listed under SKU U161TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25.5mm Solid Drilling Bit 75mm Cutting Length, 56mm Shank Length - Teknik Makina
Achieve dependable holemaking with a 25.5 mm cutting diameter and a 75 mm cutting length, combining consistent performance and straightforward insert replacement. Compatibility with SPMG 07T3 indexable inserts and leading makers like Taegutec and YG-1 reduces tooling downtime and total machining cost. Order or request specification support directly via Metav Werkzeuge for reliable supply and expert advice. Indexable insert drill U825-1TM — Ø 25.5 mm, 75 mm cutting length by Teknik Makina The indexable insert drill is engineered for medium-depth drilling in workshop and production environments, offering fast insert changes and stable mounting for repeatable hole quality 25.5 mm cutting diameter 75 mm cutting length 158 mm overall length Compatible with Taegutec and YG-1 inserts Accurate holes through controlled cutting geometry The U825-1TM is built to deliver consistent hole quality thanks to its defined cutting geometry and a comparatively long engagement length. With a Ø 25.5 mm cutting diameter and 75 mm cutting length, the tool is intended to provide repeatable results when used in appropriately configured drilling fixtures. The controlled chip formation achieved with indexable cutting edges reduces the risk of rework, so production throughput can be increased while maintaining dimensional tolerances. The combination of cutting diameter and engagement length means fewer tool changes for medium-depth applications, which contributes directly to improved line efficiency. Flexible, cost-efficient insert system for quick turnarounds Designed around standard indexable inserts, this drill accepts SPMG 07T3 plates, a widely available format that allows economical wear management. Compatibility with Taegutec and YG-1 inserts ensures access to a broad range of grades and geometries for different materials and cutting conditions. The replaceable-edge concept separates the expensive body from the consumable cutting edges, enabling predictable tool costs per hole and simplified inventory management. Insert replacement is fast and reduces machine downtime, delivering a tangible cost-benefit in series production and batch work alike. Robust shank and practical mounting for reliable handling Key mechanical dimensions support straightforward integration with standard tooling systems: a 25 mm shank diameter with 56 mm shank length, an overall length of 158 mm and a tool weight of 0.467 kg. These proportions make the drill suitable for common toolholders that accept a 25 mm shank while keeping runout and clamping forces within typical workshop tolerances. The compact overall length is helpful where access is limited, while the modest mass aids stability and handling during tool changes. Clear technical parameters permit quick verification of fixture compatibility and help planners reduce setup time. Specify the Teknik Cutting Tools indexable insert drill U825-1TM via Metav Werkzeuge for dependable supply and expert consultation — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U825-1TM Manufacturer: Teknik Makina ECLASS: 21180201 Dimensions & weight Cutting diameter: 25.5 mm Cutting length: 75 mm Overall length: 158 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.467 kg Compatibility & features Insert type: SPMG 07T3 Compatible insert makers: Taegutec, YG-1 SKU: U825-1TM FAQ What insert type does this drill use? The drill uses SPMG 07T3 indexable inserts; replacement inserts of this format can be fitted quickly to restore cutting performance. Which insert manufacturers are compatible? Compatibility is specified for Taegutec and YG-1, ensuring access to multiple grades and geometries for varied machining tasks. What are the key dimensions and weight? Key data for the U825-1TM: Ø 25.5 mm cutting diameter, 75 mm cutting length, 158 mm overall length, 25 mm shank diameter, 56 mm shank length, weight 0.467 kg. Which toolholders will accept this drill? Holders that accept a 25 mm shank are suitable; the specified shank length of 56 mm supports secure clamping in common toolholders. Is this drill suited to deep-hole drilling? With a 75 mm cutting length, the tool is best described as suitable for medium-depth holes rather than specialised deep-hole drilling applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Adapter For Solid Drills 20mm Bore, 46.5mm Length - Teknik Makina
A compact adapter offering 25 mm seating and a 20 mm precision bore for stable clamping in production; its 46.5 mm overall length supports tight tool layouts and reliable machining results. Order the adapter directly via Metav Werkzeuge or ask our consultants if needed Adapter for Solid Drills UA10TM — 25 mm seating, 20 mm bore (Teknik Makina) Adapter for Solid Drills UA10TM is a compact mounting adapter for secure integration of solid twist drills into standard toolholders, optimised for precise metalworking applications Secure 25 mm outer diameter seating 20 mm precision bore for solid drills Compact 46.5 mm overall length Durable construction for stable machining Reliable clamping that improves machining consistency The adapter's central function is to provide a precision interface between the toolholder and a solid twist drill. With a 20 mm bore matched to a 25 mm seating, the unit reduces axial and radial play, which in turn lowers runout and enhances surface finish. This mechanical accuracy translates into fewer rejects and longer tool life when paired with calibrated drills and correct machining parameters. The measured dimensions offer a verifiable basis for selecting the correct mounting sleeve and support predictable production outcomes. Space-saving design for compact tooling arrangements A total length of 46.5 mm gives the adapter a short overall footprint without sacrificing engagement depth. The reduced projection is an advantage for machines with limited clearance or multi-tool turrets where collision risk and tool overhang are critical factors. By combining a small envelope with a robust seating diameter, the component contributes to steady cutting conditions and easier tool change integration in busy workstations. The compact form also supports flexible fixturing strategies and minimises vibration potential in constrained setups. Robust interface and straightforward integration in workflows Manufactured to withstand routine shop-floor handling, the adapter features a robust construction that maintains alignment under normal machining loads. As a straightforward mechanical interface, it does not alter the drill's cutting properties but ensures consistent mounting every cycle. The UA10TM is therefore suitable for industrial and workshop environments seeking dependable clamping performance. If suitability or compatibility with a specific toolholder is unclear, Metav’s technical advisors are available to provide tailored guidance and verify fitment against existing tooling inventories. For reliable clamping in machining operations, request a technical consultation for the Teknik Makina Adapter for Solid Drills UA10TM via Metav Werkzeuge — contact our specialists in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm compatibility with specific toolholders and setups Technical data Article number: UA10TM Manufacturer: Teknik Makina ECLASS: 21029216 Facts Outer seating diameter: 25 mm Bore diameter: 20 mm Overall length: 46.5 mm Special features For solid twist drills Compact overall length for tight setups Robust design for stable machining Secure clamping interface FAQ What shank size does the adapter accept? The Teknik Makina Adapter for Solid Drills UA10TM accepts a 20 mm shank via its precision bore while providing a 25 mm seating for the toolholder interface. Will the adapter affect the drill's cutting performance? The UA10TM serves as a mechanical interface; it preserves the drill's cutting characteristics while ensuring consistent mounting, so cutting performance remains driven by the drill grade and machining parameters. How does the adapter reduce runout? Accurate bore and seating dimensions minimise lateral play; the adapter's precise fit improves concentricity between the drill and spindle, which reduces radial runout and improves surface quality. Is the adapter suitable for turreted machines or tight tool arrangements? With an overall length of 46.5 mm, the adapter is designed for compact installations and is well suited to turreted machines and fixtures with limited clearance. Can Metav provide advice on compatibility with existing holders? Guidance on fitment and compatibility is available from Metav; technical confirmation can be provided to ensure the adapter matches the specific toolholder geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Indexable Insert Solid Drill For XC-- 130404, L117mm 56.5mm Cutting Length - Teknik Makina
Combine 25 mm diameter, compatibility with XC-- 130404 indexable inserts and a 56.5 mm cutting length to achieve reliable, repeatable drilling results with minimal tool change intervals; order through Metav Werkzeuge or consult our specialists for application guidance. U051TM drill body — 25 mm diameter, for XC-- 130404 indexable inserts — Teknik Makina The U051TM drill body is a 25 mm tool body engineered to accept XC-- 130404 indexable inserts, providing stable, indexable cutting for general industrial drilling applications. 25 mm nominal diameter Compatible with XC-- 130404 indexable inserts 56.5 mm effective cutting length 117 mm overall length, solid construction Consistent hole quality through a rigid tool design The drill body offers a 25 mm diameter with a 56.5 mm cutting length, engineered to deliver consistent bore geometry and repeatable concentricity. The indexable insert system reduces the need for regrinding and supports fast replacement, so cycle times remain predictable. By relying on a rigid, balanced tool body and a defined shank interface, the assembly reduces runout and vibration, which translates directly into precise hole quality and less scrap in serial production. Faster tool changes and reduced machining downtime Using XC-- 130404 indexable inserts means cutting edges are swapped rather than the entire tool, shortening maintenance intervals and lowering per‑hole tooling costs. The insert interface is compatible with established insert geometries from ISCAR, enabling quick sourcing and straightforward inventory management. The modular concept also facilitates predictable tool life planning and simplifies spindle load calculations for high‑productivity setups. Secure clamping and operational stability for varied setups Designed with a 60 mm shank length and 117 mm overall length, the tool body offers a balance between reach and stiffness suitable for many machining centres and tooling systems. The compact overall dimensions and a weight of 0.6 kg contribute to stable clamping and reduced cantilever effects in common toolholders. Where fixture rigidity and spindle speed matter, the combination of a short effective overhang and a robust tool body helps maintain cutting edge engagement and consistent chip evacuation. Practical ordering and trusted supply chain The U051TM is supplied as a proven indexable drill body compatible with inserts from major manufacturers, which supports smooth procurement and faster replenishment. Metav Werkzeuge operates as a central European distribution point and quality filter, offering an extensive range of precision tooling and logistics reliability. With a broad product range and long market presence, Metav helps reduce supplier complexity and ensures a consistent supply of replacement inserts and bodies for uninterrupted production. Contact Metav Werkzeuge to discuss application suitability for the Teknik Makina U051TM drill body and to secure suitable inserts and delivery details; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U051TM SKU: U051TM Manufacturer: Teknik Makina Product type: Drill body Label: 25 mm drill body XC-- 130404 L117mm Facts Diameter: 25 mm Cutting length: 56.5 mm Shank length: 60 mm Overall length: 117 mm Weight: 0.6 kg ECLASS: 21180201 Compatibility & features Compatible inserts: XC-- 130404 Indexable Inserts Insert manufacturer compatibility: ISCAR Intended use: Indexable insert drilling FAQ Which inserts fit this drill body? The U051TM drill body is specified for XC-- 130404 indexable inserts and is compatible with inserts from ISCAR that follow that designation. Can the tool be used in CNC machining centres? Yes, the drill body is suitable for CNC and production tooling where a short overhang and rigid clamping are available; the 60 mm shank length helps maintain stability. How does the insert system affect operating costs? Using indexable inserts reduces tooling replacement time and lowers cost per cutting edge because only inserts are replaced, not the entire tool body. Is the U051TM available with different insert geometries? The drill body accepts any insert matching the XC-- 130404 designation; different grades and geometries can be chosen to suit material and cut strategy. What information is needed to order replacements? Provide the article number or SKU (U051TM) and specify the required insert grade or geometry to ensure compatible supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Solid Carbide Boring Bar 75mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of a robust combination of precise cutting geometry and practical compatibility: a 25 mm drill diameter with a 75 mm cutting length ensures deep, accurate holes while the SPMG 07T3 insert interface keeps tooling downtime low; order directly via Metav Werkzeuge or consult the specialists for an application match. Indexable drill body U825TM – Ø25 mm, 75 mm cutting length (Teknik Makina) The U825TM indexable drill body is a heavy‑duty drilling solution for industrial machining, designed for use with SPMG 07T3 indexable inserts and suited to demanding metal‑removal tasks Indexable drill body for SPMG 07T3 inserts Ø25 mm diameter with 75 mm cutting length Compatible with Taegutec and YG‑1 inserts Robust 158 mm overall length, 0.46 kg weight Precise holemaking for repeatable production results The drill body offers stable concentricity thanks to its Ø25 mm tooling diameter and carefully controlled geometry. This results in consistent hole quality across production batches, reducing rework and inspection time. Because the tool accepts SPMG 07T3 indexable inserts, insert replacement restores cutting performance quickly without the need for regrinding; this lowers per‑hole tooling costs and keeps machining cycles flowing. The design supports standardised workshop routines and helps maintain throughput in serial operations. Designed for straightforward integration and fast tool changes With a 56 mm shank engagement and a 158 mm overall length, the holder integrates into common toolholders used in CNC drilling heads and turret systems. The indexable concept removes the need for full tool replacement when edges wear: simply exchange the SPMG insert and resume work. Compatibility with established insert manufacturers such as Taegutec and YG‑1 broadens choice and availability of cutting grades, enabling selection of the optimal insert for mild steel, stainless or other ferrous materials encountered on the shop floor. Operational benefits: uptime, handling and safety The modular approach minimises spindle idle time because insert swaps are completed at the machine or at an adjacent tool station. The tool’s mass (0.46 kg) and balanced overall length contribute to reduced vibration under load, which enhances surface finish and extends insert life. For operators, the familiar insert format and clear seating interface simplify routine maintenance and reduce the risk of incorrect assembly; this supports safer, more efficient shift‑work in production environments. Who gains most from this tool and how it supports workflow Workshops and production lines that require reliable, repeatable drilling for medium‑diameter holes will find this drill body especially suitable. Toolroom planners and procurement teams benefit from the flexibility of indexable inserts—faster turnaround on worn edges, lower inventory for complete drills and the ability to tailor cutting grades to materials. For manufacturing engineers seeking a balance between robustness and economical operation, the tool provides a measurable improvement in serviceability and process stability. For application advice or to confirm compatibility with a machine setup, contact Metav Werkzeuge for specialist guidance — Metav’s experts are available at info@metav-werkzeuge.com or +49 2822 7131930 and can recommend the optimal insert grade and clamping solution Technical Data Article number: U825TM Manufacturer: Teknik Makina Compatible inserts: SPMG 07T3 Compatible insert manufacturers: Taegutec, YG‑1 Data Diameter: 25 mm Cutting length: 75 mm Shank length: 56 mm Overall length: 158 mm Weight: 0.46 kg Special features Indexable insert interface SPMG 07T3 Designed for standard toolholder integration Suited to industrial CNC drilling applications FAQ What insert type does this drill body accept? The drill body accepts SPMG 07T3 indexable inserts; compatible manufacturers listed for this tool are Taegutec and YG‑1. Can the drill body be used for through‑coolant drilling? The technical data supplied does not specify internal coolant channels; for through‑coolant needs, confirm the exact U825TM variant and machine interface before ordering. Is the shank diameter suitable for my turret or drilling head? The shank engagement is 25 mm with a 56 mm shank length; ensure the toolholder conforms to these dimensions for secure clamping. How does the insert system affect production uptime? Using indexable inserts like SPMG 07T3 reduces downtime because inserts are quickly replaceable, restoring cutting performance without changing the entire tool body. Which materials are typically machined with this kind of drill body? Indexable drill bodies of this construction are commonly employed for steels and other ferrous metals; choose the correct insert grade for specific material classes and hardness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Solid Carbide Boring Head 100mm Cutting Length, 56mm Shank Length - Teknik Makina
Benefit from a robust combination of 25 mm diameter, 100 mm cutting length and indexable‑insert compatibility for consistent machining performance; order the tool directly via Metav Werkzeuge or consult the team for application advice. Solid drill U725TM — 25 mm indexable drill body, 100 mm cutting length (Teknik Makina) Solid drill U725TM is an indexable drill body intended for through‑drilling applications where tool stability and economical regrind‑free cutting are required 25 mm cutting diameter 100 mm cutting length Compatible with SPMG 07T3 inserts Suits Taegutec and YG‑1 inserts Stable geometry for predictable hole quality The drill body is engineered with a 25 mm diameter and an overall length of 183 mm, providing the axial rigidity needed for repeatable hole production in batch runs. The 100 mm cutting length offers a long effective engagement that reduces the need for multiple tool changes on deeper bores. This construction translates into fewer rejects and more predictable cycle times, which supports leaner machining routines and improved throughput. Indexable inserts for lower operating costs Designed for use with SPMG 07T3 indexable inserts and compatible with insert ranges from Taegutec and YG‑1, the tool replaces whole‑body regrinds with fast insert changes. The result is a measurable reduction in tool‑holding downtime and lower consumable costs per hole. Operators benefit from consistent cutting edges and the ability to adapt insert grades to different workpiece materials without replacing the drill body. Practical shank and handling for fast set‑up A 25 mm shank diameter with a 56 mm shank length ensures secure clamping in standard toolholders while keeping the mass per tool low—weight is approximately 0.505 kg. The straightforward shank geometry simplifies balancing and reduces vibration potential, contributing directly to hole accuracy and longer insert life. The compact weight and defined shank length make routine changes at the machine faster and safer. Designed for maintenance efficiency and process reliability The indexable system supports quick replacement and inspection of cutting edges, promoting regular maintenance without extended stoppages. With a clear specification set—diameter, cutting length and insert type—tooling planners can standardise insert stocks and reduce complexity in ordering. For complex needs or machining strategies, Metav Werkzeuge offers application guidance and logistical reliability from its Emmerich site. For application support, tailored recommendations or to procure the Teknik Cutting Tools U725TM with assured supply from Metav Werkzeuge, contact Metav Werkzeuge GmbH for prompt advice and order handling Technical data Article number: U725TM Manufacturer: Teknik Makina Designation: Solid drill (indexable insert body) Dimensions & weight Diameter: 25 mm Cutting length: 100 mm Shank length: 56 mm Overall length: 183 mm Weight: 0.505 kg Features Suitable for indexable inserts: SPMG 07T3 Compatible with Taegutec and YG‑1 inserts Shank diameter: 25 mm SKU: U725TM FAQ Which inserts fit this drill body? The U725TM accepts SPMG 07T3 indexable inserts; compatible grades are available from Taegutec and YG‑1 for different material demands. What are the key dimensions to check before ordering? Key dimensions are 25 mm diameter, 100 mm cutting length and 183 mm overall length; the shank length is 56 mm. Can the drill body be used in standard toolholders? The 25 mm shank is suitable for common holders sized for that shank diameter; secure clamping is recommended to maintain repeatable hole quality. How does using indexable inserts affect operating costs? Replacing worn inserts rather than the whole tool body reduces consumable costs and downtime, with faster edge changes improving machine availability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Solid Carbide Countersink Drill 75mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of a sturdy drilling solution that combines precise 25 mm diameter stability, a 75 mm cutting length for deeper holes and reliable shank support — ideal for production runs where repeatability matters; order the U324TM directly via Metav Werkzeuge or consult the team for application-specific advice U324TM solid drill — 25 mm diameter, 75 mm cutting length (Teknik Makina) The U324TM solid drill body designed for industrial metalworking, compatible with Taegutec indexable inserts and optimised for repeatable, production-oriented holemaking 25 mm diameter for high rigidity 75 mm cutting length for deeper holes Compatible with SOMT 08T3 inserts 153 mm overall length for stable tool projection Consistent hole quality through robust geometry and length control The U324TM is engineered to deliver consistent hole quality by combining a sturdy 25 mm diameter body with a 75 mm cutting length, which reduces deflection in longer drilling operations. This geometry supports steady axial forces and improves runout stability, so each hole retains tight dimensional tolerances. For production environments where cycle time and first-pass yield are monitored, the tool’s proportions lower the risk of rework and scrap while maintaining throughput. Insert compatibility that lowers tooling cost and downtime Compatibility with SOMT 08T3 indexable inserts from Taegutec lets workshops replace only the cutting edges instead of complete tools, improving cost efficiency. The insert seat is designed for quick indexing and repeatable positioning, which shortens changeover times and keeps machines running. Clear seating and standardised insert format make it straightforward to switch inserts during shifts, contributing directly to predictable tool costs and simplified inventory management. Dimensions and handling geared for secure clamping and balance Measured at 153 mm overall length with a 56 mm shank length and a 25 mm shank diameter, the tool provides a secure interface with a range of toolholders suited to production spindles. Weighing 0.46 kg, the body balances rigidity with manageable mass for automatic tool changers and manual handling. These dimensional details help technicians select appropriate holders and set correct stick-out to optimise stability and chip evacuation without exceeding machine or process limits. Production-oriented design for dependable repeatability Built for repetitive use, this solid drill body supports predictable repositioning and minimal variation between cycles, qualities valued in batch production and subcontract machining. The construction focuses on repeatable seating of inserts and stable shank support, so teams benefit from lower variation in hole diameter and improved process capability. Where tool life and process reliability are priorities, the design helps to reduce unscheduled interventions and keeps production targets on track. For application advice, insert selection or to procure the U324TM through Metav Werkzeuge, please contact our specialists in Emmerich who can recommend the optimal setup for each machining task Technical data Article number: U324TM Manufacturer: Teknik Cutting Tools Product: Solid drill (Vollbohrer) Compatible inserts: SOMT 08T3 (Taegutec) Facts Diameter: 25 mm Cutting length: 75 mm Overall length: 153 mm Shank length: 56 mm Shank diameter: 25 mm Weight: 0.46 kg Special features Compatible with Taegutec indexable inserts Insert seat for SOMT 08T3 format Designed for repeatable positioning and secure clamping FAQ What insert type does this drill accept? The drill accepts SOMT 08T3 indexable inserts and is specified for compatibility with Taegutec insert formats when using the U324TM drill body What are the key dimensions I should check when fitting the tool? Check the 25 mm diameter, 56 mm shank length and 153 mm overall length to ensure correct clamping and projection for the U324TM solid drill Is the U324TM suitable for automatic tool changers? With a compact weight of 0.46 kg and standard shank proportions, the U324TM is suitable for many automatic tool changer applications when paired with the correct holder Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Solid Carbide Drilling Head 50mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of a robust combination of 25 mm diameter, 50 mm cutting length and a 133 mm overall length for reliable performance in production drilling. Choose direct procurement via Metav Werkzeuge or contact our advisors for specification matching and supply assurance. Vollbohrer — solid drill with 25 mm diameter and 50 mm cutting length by Teknik Makina Vollbohrer is a solid, indexable drilling solution designed for precision holemaking in CNC production and tool rooms. 25 mm diameter for stable deep drilling 50 mm cutting length for secure engagement Compatible with SPMG 07T3 indexable inserts 25 mm shank for rigid clamping in toolholders Consistent hole quality for uninterrupted production The design focuses on reproducible results and reduced cycle-time variation. With a 25 mm diameter and 50 mm cutting length, this indexable drill keeps radial runout low and helps maintain a steady cutting regime. The geometry promotes even chip evacuation and stable cutting forces, which translates into fewer tool changes and more predictable production throughput. The result is a measurable improvement in process stability without introducing complex setup steps. Rigid clamping that improves repeatability on CNC machines A robust 25 mm shank and a total length of 133 mm deliver secure seating in standard toolholders. The solid construction minimises vibration and deflection during engagement, improving concentricity and surface finish on every cycle. For workshops aiming to tighten tolerances and reduce rework, the combination of shank stability and lightweight mass (approx. 0.45 kg) helps preserve tool life and operator time while keeping handling simple. Quick insert changes and lower operating costs The cutter accepts SPMG 07T3 indexable plates and is compatible with inserts from Taegutec and YG-1, so replacement is straightforward and inventory can be standardised across similar tools. Using replaceable inserts reduces the cost per hole and shortens downtime compared with solid-carbide alternatives. The modular approach also enables easy adaptation of grade and geometry to different cutting conditions, improving economic efficiency across batch and continuous production runs. Where this tool adds most value in the workflow Engineered for repeatable drilling tasks in production environments and specialist tool rooms, this indexable solid drill integrates into standard machining setups with minimal adjustment. The practical combination of diameter, cutting length and shank design simplifies fixture planning and tool management. For buyers seeking predictable supply and consistent quality, it integrates well into centralised procurement strategies and supports a reliable, scalable machining process. Contact Metav Werkzeuge for tailored procurement guidance on this Teknik Cutting Tools solid drill — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U925TM Manufacturer: Teknik Makina Product name: Vollbohrer Facts Diameter: 25 mm Overall length: 133 mm Cutting length: 50 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.45 kg Special features For indexable plate: SPMG 07T3 Compatible insert manufacturers: Taegutec, YG-1 FAQ Which indexable insert fits this drill? The Vollbohrer is designed for SPMG 07T3 indexable plates and accepts compatible grades from Taegutec and YG-1. What is the shank diameter and how is it clamped? The tool has a 25 mm shank suitable for standard 25 mm toolholders and collets used in many CNC spindles. What are the key dimensions to check before ordering? Verify the 25 mm diameter, 50 mm cutting length and 133 mm overall length to ensure compatibility with the machine and fixturing. Can the insert choice affect cycle times? Yes — selecting the appropriate insert grade for the application optimises cutting speeds and extends service intervals for the Vollbohrer. Is this tool suitable for small-batch and volume production? The modular indexable design makes it appropriate for both small-batch flexibility and high-volume runs where rapid insert changes improve uptime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Solid Drill 100mm Cutting Length 56mm Shank Length, 178mm Overall - Teknik Makina
Take advantage of precise 25 mm bore capacity, 100 mm cutting length and a robust 25 mm shank for stable, repeatable holemaking; order directly via Metav Werkzeuge or contact our consultants for tailored application advice. Indexable Drill U422TM – 25 mm diameter, 100 mm cutting length (Teknik Makina) The Indexable Drill U422TM is an industrial indexable drill designed for efficient holemaking in metalworking, combining an intermediate reach with secure clamping for consistent cycle times 25 mm diameter for standard boremaking 100 mm cutting length for deeper holes Compatible with SOMT 08T3 insert type 25 mm shank for rigid toolholding Consistent bore quality and process reliability The tool delivers repeatable hole geometry by combining a defined cutting zone with a solid clamping interface. The 25 mm diameter and 100 mm cutting length ensure stable chip formation in through or deep-hole operations, reducing the need for rework. For users migrating from solid drills, the indexable design lowers tooling costs per hole because only the SOMT 08T3 inserts need periodic replacement rather than the whole tool body. This leads to measurable productivity gains and fewer machine interruptions in batch production. Fast maintenance and lower consumable cost Designed for straightforward insert replacement, the drill accepts SOMT 08T3 inserts from Taegutec, enabling rapid service intervals and minimal downtime. The modular approach means maintenance is limited to changing inserts and a short inspection of the seat, rather than complex regrinding. The result is improved process economics: lower per-hole tooling expense and quicker turnarounds when performing scheduled maintenance or index changes on the shop floor. Stable clamping and controlled reach for accurate positioning With a 25 mm shank and a total length of 178 mm, the holder balances reach and rigidity. The defined 56 mm clamping length improves axial stability, which reduces vibration and supports tighter tolerances in serial production. Where fixturing and repeat accuracy are essential, this configuration helps maintain concentricity and surface finish while keeping feed rates efficient. The tool’s mass (approx. 0.498 kg) is optimised for common spindle setups without compromising balance. Practical application guidance for workshop integration The drill is suitable for use where indexable insert systems are preferred over solid carbide solutions for economic reasons or ease of service. When pairing the tool with inserts, verify seat condition and torque on the clamping screws to maintain cutting performance. For uncertain machine compatibility or to refine cutting data for a specific alloy, Metav Werkzeuge’s advisory service can assist with feed/speed recommendations and insert selection, ensuring the tool achieves its intended productivity improvements. Contact Metav Werkzeuge for expert application advice and order processing for Teknik Makina indexable drills; Metav Werkzeuge’s specialists will support selection of the correct insert and ensure prompt delivery from Emmerich Technical data SKU: U422TM Manufacturer: Teknik Makina Product name: Indexable Drill U422TM Measured values Diameter: 25 mm Cutting length: 100 mm Shank diameter: 25 mm Clamping length: 56 mm Overall length: 178 mm Weight: 0.498 kg Special features Compatible insert type: SOMT 08T3 Compatible insert brand: Taegutec Tool type: indexable drill Application: metalworking holemaking FAQ What materials is this drill suitable for? The Indexable Drill U422TM is designed for general metalworking applications; insert choice and cutting data determine effectiveness for specific alloys Which inserts fit the tool? This drill accepts SOMT 08T3 inserts; Taegutec plates are compatible as indicated for the U422TM What are the essential dimensions to check before ordering? Confirm the 25 mm diameter, 25 mm shank and 178 mm overall length match the machine’s toolholder and the intended hole depth for the application How does the indexable design benefit production? With replaceable inserts the U422TM reduces per-hole tooling cost and shortens maintenance time compared with replacing a whole solid drill Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Solid Drill 100mm Cutting Length, 183mm Overall Length - Teknik Makina
Take advantage of a compact, insert-based drilling solution that combines a 25 mm diameter and 100 mm cutting length for consistent hole-making performance; order the indexable insert drill U618TM directly via Metav Werkzeuge or ask the consultants for compatibility advice. Indexable insert drill U618TM by Teknik Makina — 25 mm Ø, WCM-0503 compatible The indexable insert drill U618TM is a purpose-built drill body designed for machining centres and drilling units that require a 25 mm system and accept WCM‑0503 inserts 25 mm diameter for standard hole sizes 100 mm cutting length for deeper holes Compatible with WCM-0503 indexable inserts Robust 183 mm overall length, 56 mm shank Precise hole-making with an insert‑based system The unit is engineered as an indexable insert solution that combines repeatable performance with economical tooling management. With a nominal 25 mm diameter and a 100 mm cutting length, the tool body supports consistent chip evacuation and predictable machining cycles. Using a standard insert format such as WCM‑0503 reduces inventory complexity and shortens changeover times, since compatible inserts from established suppliers such as Korloy are accepted. The result is improved process stability and a measurable reduction in downtime when inserts are rotated or replaced. Stable clamping geometry for reduced vibration and longer tool life A compact overall length of 183 mm together with a 56 mm shank provides secure clamping and greater concentricity at the spindle. The relatively low mass of 0.526 kg contributes to reduced dynamic imbalance while keeping handling straightforward for set-up staff. These mechanical properties translate into lower tool deflection and enhanced surface quality at the bore, which is especially beneficial for production runs where repeatability is essential. The construction supports standard toolholding systems and helps maintain consistent runout characteristics across batches. Designed for production workflows and fast serviceability The modular nature of the system supports swift insert replacement and straightforward inventory management, which benefits shops aiming to maximise machine uptime. The tool body’s acceptance of WCM‑0503 inserts enables flexible cutting edge selection for different machining tasks without replacing the entire tool. Maintenance becomes a matter of changing inserts rather than renewing complete drills, delivering both ecological and economic advantages. For procurement and workshop planning, the U618TM integrates into existing processes with minimal additional tooling requirements, aligning with Metav’s commitment to reliable supply and practical workshop support. Contact Metav Werkzeuge for a tailored recommendation on the U618TM indexable insert drill and to confirm compatibility with existing inserts and holders Technical Data Article number: U618TM Manufacturer: Teknik Makina Data Diameter: 25 mm Cutting length: 100 mm Shank length: 56 mm Overall length: 183 mm Weight: 0.526 kg Compatible insert type: WCM-0503 Special features Compatible inserts by Korloy Indexable insert drill body Compact design for stable clamping Files: 62de7ec30f56dbb4de4dbf2d, 62de7dd9148ec6b71020ff6b FAQ Which inserts fit this drill? The drill body accepts WCM‑0503 indexable inserts; Korloy‑specified inserts are compatible with the U618TM. What are the key dimensions to check for machine compatibility? Check the 25 mm diameter and 56 mm shank length; the overall length is 183 mm for ensuring sufficient clearance. How long is the cutting edge engagement? This tool provides a 100 mm cutting length, suitable for medium‑deep hole operations within its design envelope. Is this tool suitable for quick insert changes on the shop floor? Yes, the indexable design allows inserts to be replaced independently of the body, which reduces downtime and simplifies maintenance procedures. What is the SKU and who manufactures the tool? SKU: U618TM; manufactured by Teknik Cutting Tools and distributed via Metav Werkzeuge for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Solid Drill 125mm Cutting Length 56mm Shank Length, 208mm Overall Length - Teknik Makina
Take advantage of a robust indexable drill solution that combines a 25 mm cutting diameter with a 125 mm cutting length for consistent, deep-hole performance; compatibility with Korloy WCM-0503 inserts reduces tooling costs and downtime. Order the tool directly via Metav Werkzeuge or ask our consultants for application-specific guidance. Indexable Insert Drill – 25 mm Ø, 125 mm cutting length | Teknik Makina The indexable insert drill by Teknik Makina is a precision drill body designed for medium-deep holemaking and integration into machining centres and turning centres with holders accepting a 25 mm shank. Versatile 25 mm cutting diameter Extended 125 mm cutting length Compatible with Korloy WCM-0503 inserts Robust shank Ø 25 mm, 56 mm clamping length Engineered for consistent hole quality and low running costs This indexable drill body delivers repeatable hole geometry by combining a defined cutting length of 125 mm with a 25 mm nominal diameter. The use of indexable inserts means that the cutting edges can be renewed in seconds, which reduces tool change time and lowers overall operating costs compared with solid regrindable drills. The construction provides a stable tool centre, which helps maintain concentricity and reduces the need for rework when producing batches or serial components. For users unfamiliar with insert systems: replacing a worn insert restores cutting performance without the need for regrinding the entire tool. Straightforward integration with common toolholders and insert systems Designed with a shank Ø 25 mm and a clamping length of 56 mm, the drill body fits holders and adaptors that accept nominal 25 mm shanks, enabling fast retrofitting into existing tool setups. Compatibility with Korloy insert geometry WCM-0503 allows the use of widely available insert grades and coatings for varied materials. The relatively light mass (approx. 0.678 kg) reduces spindle load while preserving rigidity, making the component suitable for production environments where tool change simplicity and machine uptime are priorities. Durable design for reliable chip control and productive cycles The tool’s geometry and indexable concept contribute to predictable chip evacuation and stable cutting conditions over extended runs. Where consistent finish and dimensional stability matter, the replaceable insert approach reduces cumulative wear effects and extends the effective life of the tool body. Combined with Metav’s focus on dependable supply and quality filtering from its Emmerich base, the drill body supports continuous operation and lowers the risk of unexpected downtime in busy workshops. Contact Metav Werkzeuge for availability and tailored advice on insert selection and machine setup – email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Teknik Cutting Tools indexable drill body (SKU U785TM) and suitable Korloy inserts Technical data Article number: U785TM Manufacturer: Teknik Makina SKU: U785TM Cutting diameter: 25 mm Cutting length: 125 mm Total length: 208 mm Shank diameter: 25 mm Shank clamping length: 56 mm Weight: 0.678 kg Compatible insert manufacturer: Korloy Compatible insert type: WCM- 0503 Tool design: Indexable insert drill body Intended holder size: for holders accepting Ø25 mm shank FAQ Which insert type is required for this drill body? The drill body requires Korloy WCM-0503 inserts; the Teknik Makina indexable drill (SKU U785TM) is designed to accept that specific insert format. Can the drill be used in standard 25 mm holders? Yes, the tool features a shank Ø 25 mm and a 56 mm clamping length, so it is suitable for holders that take a 25 mm shank. What is the maximum effective cutting length? The effective cutting length is 125 mm, enabling deeper holemaking without the need for extensions in many applications. How does the indexable system affect operating costs? Using replaceable inserts like WCM-0503 reduces the need for full-tool replacement or regrinding, lowering per-hole tooling costs and shortening downtime for maintenance. Is the tool suitable for a production environment with frequent tool changes? Yes, the indexable design and common insert compatibility simplify changeover and support high-uptime production workflows with predictable performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Solid Drill 50mm Cutting Length 56mm Shank Length, 133mm Overall - Teknik Makina
Take advantage of a robust combination of 25 mm diameter, 50 mm cutting length and secure shank design for reliable holemaking. Optimised for indexable insert use, the tool reduces downtime through fast insert changes and predictable chip behaviour — order the tool directly via Metav Werkzeuge or request application guidance from our specialists. U118TM indexable insert drill by Teknik Cutting Tools — 25 mm diameter, 50 mm cutting length The U118TM indexable insert drill is an indexable insert drill body designed for efficient, repeatable holemaking in general machining applications using Korloy WCM-0503 inserts 25 mm diameter for standard holemaking 50 mm cutting length for stable penetration 56 mm shank length for secure clamping Compatible with Korloy WCM-0503 inserts Consistent hole quality through controlled cutting geometry The body’s 50 mm cutting length and defined geometry deliver a steady material removal rate and improved chip control, which reduces the risk of built-up edge and rework. Using an indexable concept with the WCM-0503 insert separates cutting edge wear from the holder, so replacement is quick and economical; the result is lower lifecycle cost compared with regrinding solid drills. For shops aiming to increase first-pass yield, the combination of cutting length and insert system translates into fewer interrupted cycles and more predictable results. Stable clamping for improved runout and surface finish A 56 mm shank length combined with the tool’s overall mass provides higher rigidity at moderate overhangs, limiting vibration and runout. The reduced movement at the cutting point supports a finer bore tolerance and extended insert life. With a compact overall length of 133 mm and a tool weight of 0.42 kg, the design balances stiffness and handling, making it suitable for both CNC spindle work and turret-style drilling heads where secure clamping is essential for repeatability. Practical fitment and workshop efficiency Compatibility with Korloy WCM-0503 inserts simplifies inventory: standardised inserts allow rapid replacement and reduce the number of unique spare parts required. The 25 mm shank interface and clear specification of shank and cutting dimensions mean straightforward integration into existing toolholders and collet systems. Clear labelling of core dimensions supports process planning and cutter selection, enabling quicker setup and less trial-and-error at the machine. Speak to Metav Werkzeuge for tailored application advice and procurement of the Teknik Cutting Tools U118TM indexable insert drill — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U118TM Manufacturer: Teknik Makina Diameter: 25 mm Cutting length: 50 mm Shank length: 56 mm Overall length: 133 mm Weight: 0.42 kg Compatible inserts: WCM-0503 Insert manufacturer compatibility: Korloy Tool type: Indexable insert drill body FAQ What insert type is required for this drill body? The drill body accepts WCM-0503 indexable inserts; the design is matched to that insert geometry for secure seating and consistent cutting performance. Can the tool be used in standard toolholders? The tool’s shank and overall dimensions are specified for common clamping systems; measure the holder interface against the 56 mm shank length and 25 mm diameter to confirm fit. How does the indexable concept affect maintenance? With the indexable approach, worn cutting edges are replaced quickly without regrinding the holder; this reduces machine downtime and simplifies spare part management for the workshop. Is the U118TM suitable for high-speed drilling? Performance at elevated speeds depends on machine capability, insert grade and cutting parameters; the U118TM provides a rigid platform, while the cutting speed limits are determined by the chosen insert and workpiece material Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Solid Drill 56.5mm Cutting Length 135mm Overall Length, 32mm Shank - Teknik Makina
Take advantage of a robust drilling solution that combines precise holemaking with easy insert replacement; the 25 mm diameter and 56.5 mm cutting length deliver consistent results while the 32 mm shank ensures stable clamping for machining centres. Order the component via Metav Werkzeuge or consult Metav’s specialists for application advice. Indexable drill — 25 mm diameter, 32 mm shank (Teknik Makina) Indexable drill designed as a drill body for machining centres and CNC turning/milling stations, suitable for medium-depth holes and indexable inserts in metalworking applications High radial stability with 32 mm shank Available cutting length 56.5 mm for deeper holes Compatible with Korloy QC-- 130404 inserts Balanced at 0.6 kg for secure spindle handling Reliable holemaking with controlled geometry and repeatability The tool body is engineered to provide consistent hole quality, using a 25 mm nominal diameter and a 56.5 mm cutting length to achieve repeatable depths in series production. The 32 mm shank ensures secure clamping in standard toolholders, which reduces runout and contributes to accurate form and position tolerance. Presented as an indexable drill body, the construction allows for quick correction of cutting geometry by replacing inserts rather than regrinding tools, maintaining production stability and lowering rework rates. Reduced downtime through insert compatibility and practical serviceability Compatibility with Korloy indexable inserts (type QC--130404) means predictable tooling cycles and easy procurement of replacement cutting edges. The 60 mm shank length supports adequate reach for most fixture setups without compromising rigidity, while the moderate mass of 0.6 kg simplifies handling during tool changes and reduces unnecessary spindle load. These attributes lead to a measurable reduction in setup time and an improved cost-per-hole metric, particularly where frequent insert changes are part of the process strategy. Integration into existing workflows and clear ordering references Designed for straightforward integration into workshop tool inventories, the component fits common clamping systems thanks to its standardised 32 mm shank and overall length of 135 mm. The article is referenced as U042TM for procurement and inventory management, facilitating rapid identification in ERP systems. For machine shops seeking a reliable indexable solution, the drill body supports consistent production throughput and predictable maintenance intervals, backed by Metav’s distribution and advisory capabilities. Contact Metav Werkzeuge for a specification check and order the Teknik Cutting Tools indexable drill body (U042TM) to ensure the correct insert match and mounting for the intended machine setup; Metav’s advisors can provide machining recommendations and supply logistics from Emmerich Technical data Article number: U042TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Facts Diameter: 25 mm Overall length: 135 mm Cutting length: 56.5 mm Shank diameter: 32 mm Shank length: 60 mm Weight: 0.6 kg Special features Compatible inserts: QC-- 130404 Compatible insert manufacturer: Korloy Tool type: Indexable drill body SKU: U042TM FAQ What insert type fits this drill body? The drill body accepts indexable inserts of type QC-- 130404; compatibility is specified for Korloy inserts and confirmed for the Teknik Cutting Tools indexable drill (U042TM). Which shank diameter is required for mounting? A 32 mm shank diameter is specified; the 32 mm shank ensures secure clamping in standard toolholders for stable machining performance. What is the effective cutting length and overall reach? The effective cutting length is 56.5 mm and the overall length is 135 mm, offering sufficient reach for medium-depth drilling tasks. How should this tool be referenced when ordering? Order under the SKU U042TM and reference the Teknik Cutting Tools indexable drill body (Teknik Makina) to ensure correct supply and insert compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Solid Drill 75mm Cutting Length 56mm Shank Length, 158mm Overall Length - Teknik Makina
Take advantage of reliable rigidity and efficient insert replacement: the combination of a 25 mm drill diameter and 75 mm cutting length delivers stable chip control and consistent hole quality. Order the Vollbohrer U160TM directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer U160TM — indexable drill body with 25 mm diameter and 75 mm cutting length (Teknik Cutting Tools) A Vollbohrer U160TM designed as an indexable drill body for production drilling tasks, compatible with standard WCM-0503 inserts and intended for integration into CNC and machining-centre tool inventories. 25 mm drill diameter 75 mm cutting length Compatible with WCM-0503 inserts 158 mm overall length Precise drilling performance for production environments The indexable drill body delivers consistent axial stability thanks to its 25 mm diameter shank and a clamping length of 56 mm, which together reduce runout and improve hole accuracy. With a 75 mm cutting length and a total length of 158 mm, the tool balances reach and rigidity for through-hole and shallow-depth operations. The construction supports repeatable positioning in the spindle, enhancing part-to-part consistency and lowering scrap rates in series production. Fast insert changes and reduced downtime Designed for use with WCM-0503 inserts from common suppliers such as Korloy, the drill body simplifies maintenance: inserts are indexed or replaced without removing the entire tool, cutting changeover time and associated labour. The standardised insert interface ensures predictable cutting geometry and facilitates stock management of wear parts. Reduced downtime and straightforward insert handling translate into improved machine utilisation and a favourable cost-in-use profile. Integration into workshop toolsets and process reliability Suited to machining-centre workflows, the tool body offers a compact footprint (weight approx. 0.467 kg) while maintaining mechanical stability for interrupted or continuous drilling cycles. The design supports industrial tool management strategies by allowing compatibility across machines that accept a 25 mm shank. When paired with a consistent insert supply and correct process parameters, the assembly delivers repeatable cycle times and stable surface finish, making it a practical choice for production and maintenance departments. Contact Metav Werkzeuge for tailored application advice on the Teknik Cutting Tools Vollbohrer U160TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and ordering options Technical data Article number: U160TM Manufacturer: Teknik Makina Product name: Vollbohrer eClass: 21180201 Dimensions & core data Diameter: 25 mm Cutting length: 75 mm Shank/clamping length: 56 mm Overall length: 158 mm Weight: 0.467 kg Shank/adapter diameter (aufnahme_mm_d): 25 mm Compatibility & features Compatible inserts: WCM-0503 Compatible insert manufacturer: Korloy Tool type: Indexable drill body FAQ Which inserts fit the drill body? The drill body accepts WCM-0503 indexable inserts; compatibility with Korloy-specified grades is confirmed for the Teknik Cutting Tools Vollbohrer U160TM. What are the key dimensions to check before fitting? Verify the 25 mm shank diameter, 56 mm clamping length, and the 158 mm overall length to ensure correct mounting and sufficient reach for the intended application. Is the tool suitable for CNC machining centres? Yes, the indexable design and standardised shank dimensions make the tool suitable for integration into CNC and automated machining setups; the Vollbohrer U160TM supports predictable performance in production contexts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Solid Drill for XC-- 130404 Indexable Inserts 56.5mm Cutting Length, 60mm Shank - Teknik Makina
Take advantage of a compact, 25 mm drill body that combines precise holemaking with easy insert replacement; its 117 mm overall length and compatibility with XC-- 130404 indexable inserts ensure consistent production results. Order the tool directly via Metav Werkzeuge or consult the technical team for application-specific guidance. Drill body U25TM — 25 mm diameter, 117 mm overall length, for XC-- 130404 indexable inserts by Teknik Makina The Drill body U25TM is a robust toolholder designed for indexable-insert drilling applications, offering a compact footprint and straightforward insert mounting for workshop and light industrial use. 25 mm cutting diameter Compatible with XC-- 130404 inserts 117 mm overall length Consistent hole quality for demanding operations The U25TM drill body delivers repeatable results through a combination of a defined 56.5 mm cutting length and a solid construction that promotes precision in serial drilling. The clear dimensional setup (including a 25 mm diameter and 117 mm overall length) reduces setup guesswork and simplifies process documentation, which is especially valuable in production environments where consistent hole diameter and positional accuracy directly affect downstream assembly and part interchangeability. The modest mass of 0.6 kg contributes to handling convenience without compromising stability. Reduced downtime through an indexable-insert concept Designed specifically for XC-- 130404 indexable inserts, the tool body facilitates rapid insert changes and predictable cutting behaviour. Compatibility with Taegutec inserts ensures access to established grades and geometries, so worn edges are replaced rather than regrinded, shortening maintenance cycles and lowering life-cycle costs. The indexable approach supports efficient inventory management of cutting edges and helps maintain cutting performance across shifts, emphasising operational reliability and cost-efficiency in routine production. Compact, rigid design that supports stable machining A sturdy shank and precise interface dimensions—including a 32 mm shank diameter and a 60 mm shank length—provide a stable connection to standard toolholders and reduce vibration during drilling. The compact overall size aids accessibility in confined set-ups while the engineered geometry promotes even load transfer to the machine spindle, contributing to consistent tool life and surface finish. Where fixture space is limited, this combination of rigidity and compactness helps preserve part quality and machine uptime. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Cutting Tools drill body U25TM with 25 mm diameter and 117 mm overall length; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific operations Technical Data Article number: U25TM Label: 25mm Vollbohrer XC-- 130404 L117mm Manufacturer: Teknik Cutting Tools / Teknik Makina SKU: U25TM Facts Diameter: 25 mm Overall length: 117 mm Cutting length: 56.5 mm Shank length: 60 mm Shank diameter: 32 mm Weight: 0.6 kg eClass: 21180201 Special features Compatible with XC-- 130404 indexable inserts Recommended insert manufacturer: Taegutec Product type: Drill body Bezeichnung_2_en: for XC-- 130404 Indexable Inserts FAQ What insert type fits this drill body? The drill body accepts XC-- 130404 indexable inserts; use inserts from Taegutec as specified for optimal fit and performance. What are the key dimensions to check for machine compatibility? Check the 25 mm diameter, 117 mm overall length and the 32 mm shank diameter to ensure correct holder and spindle compatibility for the U25TM. Can worn cutting edges be replaced on site? Yes; the indexable design means cutting edges are replaced rather than resharpened, so maintenance is reduced and service intervals are predictable for the U25TM. Is the tool suitable for confined setups? The compact geometry and 60 mm shank length of the drill body support installation in tighter work envelopes while preserving stability during drilling. What does the SKU U25TM refer to? SKU U25TM identifies the 25 mm drill body version intended for XC-- 130404 inserts manufactured under the Teknik Makina product line. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Solid Drill for XC-- 130404 Indexable Inserts 56.5mm Cutting Length, 60mm Shank Length - Teknik Makina
Combine precise 25 mm diameter with a 56.5 mm cutting length and proven compatibility with XC-- 130404 indexable inserts for efficient, repeatable holemaking; order the tool directly via Metav Werkzeuge or consult Metav's technical team for application matching. Indexable-insert Drill Body U068TM — 25 mm, L117 mm by Teknik Makina The Indexable-insert Drill Body U068TM is an indexable-insert drilling solution engineered for CNC holemaking using XC-- 130404 indexable inserts, delivering consistent bore quality and straightforward insert changes in production environments 25 mm nominal diameter for standard bore ranges 56.5 mm effective cutting length for deep holes Compatible with Ceratizit XC-- 130404 inserts 60 mm shank length for stable clamping Predictable hole tolerances through insert-based drilling The XC-- 130404-compatible design places repeatability at the forefront: by using indexable inserts the system separates cutting geometry from the tool body, which keeps bore tolerances steady across batches. The combination of a 25 mm diameter and a defined 56.5 mm cutting length enables predictable chip evacuation and consistent tool engagement, reducing variation between consecutive holes. For process planners, insert geometry control means machining outcomes can be standardised without replacing the whole tool, supporting quality assurance in small and medium series. Faster recovery and lower tool-change overhead Switching worn or damaged cutting edges is considerably quicker with an insert-based solution than with regrinding solid tools. The modular concept of the drill body shortens maintenance intervals and reduces overall tooling cost per hole. Because insert replacement is localised to the cutting head, machine downtime is minimised and spare-part logistics become simpler, which directly improves spindle utilisation and throughput in CNC operations where tool-change time is critical. Stable clamping and reliable axial support With an overall length of 117 mm and a 60 mm shank length, the drill body provides robust support in standard toolholders. The engineered proportions contribute to axial stability during plunge and peck cycles, reducing vibration and runout effects that can impair surface finish and hole cylindricity. The modest mass (approx. 0.6 kg) balances rigidity and manageable handling for toolroom procedures, ensuring reliable clamping force without excessive overhang. Compatibility that eases procurement and inventory Designed for use with XC-- 130404 inserts from Ceratizit, the system aligns with widely available insert portfolios, easing replenishment and interchangeability. Standardising on a common insert family simplifies inventory management and allows purchasing departments to consolidate suppliers across multiple machines. The clear match to established insert geometries also helps application engineers choose cutters that fit existing machining parameters and coolant strategies. Practical advantages within CNC workflows The tool body concept supports stepwise process optimisation: trialling a new insert grade or coating can be achieved without acquiring new holders, allowing fast evaluation of cut conditions and surface finish improvements. This flexibility is particularly beneficial in mixed-production shops or subcontract milling centres that process varied materials; the ability to adapt insert type quickly leads to improved first-pass yield and fewer corrective operations. Clear specification for system integration For procurement and CAM programming, the key specification elements are immediate: 25 mm diameter, 56.5 mm cutting length, 60 mm shank length, 117 mm overall length, and compatibility with XC-- 130404 inserts. The SKU U068TM and ECLASS identifier support ordering and ERP integration. When selecting holders or adapting tool libraries, these measurable values allow rapid verification of reach, clearance and clamping requirements to ensure trouble-free commissioning on CNC machines. For fast technical matching and reliable supply of Teknik Makina indexable-insert tooling, contact Metav Werkzeuge for a tailored quote or application consultation at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav's specialists assist with insert selection and delivery logistics. Technical data SKU: U068TM Label: 25mm Vollbohrer XC-- 130404 L117mm Product type: Indexable-insert drill body Manufacturer: Teknik Makina Facts Diameter: 25 mm Cutting length: 56.5 mm Shank length: 60 mm Overall length: 117 mm Holder diameter: 32 mm Weight: 0.6 kg ECLASS: 21180201 Special features Compatible with XC-- 130404 indexable inserts Compatible insert manufacturer: Ceratizit SKU for ordering: U068TM Designed for CNC holemaking and insert replacement FAQ What hole sizes can be produced with this drill body? The Indexable-insert Drill Body U068TM produces nominal 25 mm bores and supports the specified 56.5 mm cutting length for through or partial-depth holes within that diameter range. Which inserts fit the drill body? This drill body accepts XC-- 130404 indexable inserts; insert geometry and grades from Ceratizit are compatible with the holder interface. Is the tool suitable for production CNC machines? Yes, the holder geometry and 60 mm shank length provide stable clamping for CNC applications where repeatability and reduced tool-change time are priorities. How is the product identified for purchasing systems? Order using the SKU U068TM and reference the ECLASS 21180201 to ensure correct ERP mapping and catalogue alignment. What are the primary advantages of using this indexable-insert concept? The indexable-insert approach reduces downtime for edge changes, lowers per-hole tooling cost and enables fast trials of insert grades without replacing the tool body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26.5mm Solid Drill 78mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of the combination of durable construction, insert compatibility and precise dimensions to maintain steady production cycles; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Indexable drill body U163TM – Ø 26.5 mm, 78 mm cutting length (Teknik Makina) The Indexable drill body U163TM is engineered for industrial metalworking where reliable holemaking and rapid insert changes are required, suited to batch production and maintenance operations. Robust indexable-drill body design Compatible with Korloy WCM-0503 inserts Ø 26.5 mm drilling diameter Lightweight at 0.497 kg Consistent hole quality for repeatable production The U163TM offers a dependable tool platform for demanding drilling tasks. With a Ø 26.5 mm cutting diameter and a 78 mm cutting length, the tool enables deep-hole passes with controlled chip evacuation, reducing cycle times and the need for multiple operations. Designed for indexable tooling, the body accepts the Korloy WCM-0503 insert format, which supports quick replacement and minimal downtime. This combination delivers measurable efficiency gains in repetitive manufacturing and helps maintain process stability on series parts. Practical mounting and handling to speed up set-up A precision 25 mm shank and a dedicated shank length of 56 mm ensure secure clamping in common toolholders, so the drill body stays concentric under load and contributes to improved surface finish and roundness. The component’s modest mass of 0.497 kg keeps handling straightforward during tool changes and reduces spindle imbalance risk. Fewer balancing steps and reliable clamping mean faster set-up and less machine idle time, which translates into better utilisation of machining assets. Built for compatibility and straightforward maintenance The design centres on replaceable cutting edges rather than full regrinds, making maintenance routines predictable and economical. Using standardised indexable inserts such as the Korloy WCM-0503 simplifies stocking and shortens procurement cycles. The modular approach reduces waste and allows teams to restore cutting performance quickly by swapping inserts, rather than replacing entire tools. For workshops aiming to rationalise tooling inventory, this drill body supports a pragmatic strategy: keep a small set of inserts to cover larger production runs. Application guidance and expected benefits in daily use When integrated into a consistent machining routine, the body’s geometry and insert system reduce vibration and tool wear. The practical design supports operations on a variety of ferrous and non-ferrous workpieces when paired with the correct insert grade and cutting data. As a result, customers can expect improved hole tolerances and fewer reworks. For engineers seeking predictable output and lower per-hole costs, the U163TM provides a focused tool solution that aligns with industrial productivity goals. Choose the Teknik Makina indexable drill body U163TM for efficient insert changes and steady drilling performance — contact Metav Werkzeuge for tailored advice and order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: U163TM Manufacturer: Teknik Makina Facts Diameter: 26.5 mm Cutting length: 78 mm Overall length: 161 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.497 kg SKU: U163TM Special features Compatible with Korloy WCM-0503 inserts Indexable-insert drill body Designed for industrial metalworking FAQ Which insert type fits this drill body? The drill body accepts Korloy WCM-0503 inserts; matching the correct grade to the workpiece material is recommended for optimal performance. What is the drilling diameter and cutting length? The tool provides a drilling diameter of 26.5 mm with a cutting length of 78 mm for deep-hole applications. What shank dimensions should the toolholder accommodate? A 25 mm shank diameter with a shank length of 56 mm is required for secure mounting in standard holders. Is the U163TM suitable for series production? Yes, the indexable design and quick insert changes make the U163TM suitable for repetitive manufacturing and batch processing. How heavy is the drill body for manual handling? The body weighs approximately 0.497 kg, which facilitates handling during tool changes and set-up. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26.5mm Solid Drill 78mm Cutting Length, 56mm Shank Length - Teknik Makina
There is a data inconsistency: the item is described as "Vollbohrer" (solid drill) while the specification also lists compatibility with replaceable indexable inserts (SPMG 07T3) and names insert manufacturers Taegutec and YG‑1. A true solid drill does not accept replaceable inserts, so these details conflict. Please confirm whether the tool is a solid drill or an indexable insert drill and provide corrected specifications (for example: confirmation of insert usage, correct insert designation, or explicit solid‑carbide construction). Until the product type and related technical data are clarified, a production‑ready product description cannot be created, as the conflicting information prevents accurate categorisation and detailed technical documentation.
26mm Solid Carbide Through Coolant Drill 104mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of a robust, indexable solution that combines consistent drilling performance with quick insert changeovers; the compact Ø 26 mm diameter together with a 104 mm cutting length supports efficient, repeatable production. Secure procurement and expert advice are available via Metav Werkzeuge. Indexable drill body U726TM – Ø 26 mm, for SPMG 07T3 inserts (Teknik Makina) The Indexable drill body U726TM is engineered for industrial drilling operations requiring indexable insert tooling; ideal where repeatability and fast reconditioning are priorities 26 mm cutting diameter for medium holes Compatible with SPMG 07T3 indexable inserts 25 mm shank diameter for secure clamping 104 mm effective cutting length for deep holes Consistent metal removal from first cut to last The U726TM body is built to deliver predictable cutting performance across production batches. With a Ø26 mm diameter and an effective cutting length of 104 mm, the design balances rigidity and reach to reduce vibration and improve hole quality. The 25 mm shank provides a solid clamping interface in standard toolholders, helping to maintain runout and prolong insert life. These measurable specifications translate into fewer rejected parts and a more reliable machining cycle, which directly improves throughput and lowers scrap rates. Faster setup and lower tooling overhead Adaptability is a clear benefit: the tool accepts SPMG 07T3 inserts and is compatible with established insert brands such as Taegutec and YG-1, enabling the use of widely available cutting edges. Standardised insert geometry reduces stocking complexity and shortens changeover time when resharpening or replacing inserts. The modular approach shifts maintenance from expensive regrinds to quick insert swaps, improving machine uptime and simplifying logistics for production planners and purchasing departments. Robust design for everyday workshop demands A total length of 187 mm combined with a clamping length of 56 mm supports both stability and accessibility in typical tool setups. The tool’s modest mass of 0.539 kg reflects a compact construction that is easy to handle while remaining stiff under cutting forces. The indexable format allows individual cutting edges to be renewed without replacing the entire tool body; this reduces long-term costs and keeps performance consistent. Clear, repeatable assembly tolerances make routine servicing straightforward and suitable for busy toolrooms. Where this tool brings most value This drill body is intended for workshop and production environments that favour indexable tooling for medium-diameter holes and moderate depths. It suits applications where manufacturers need a dependable drill body that pairs with commercial SPMG 07T3 inserts and common suppliers like Taegutec and YG-1. The combination of a secure 25 mm shank and ample cutting length supports tasks such as component and fixture drilling where cycle stability and quick insert replacement are priorities. For operations looking to streamline their tooling inventory while maintaining machining quality, this solution offers clear gains. The U726TM can be specified as part of a broader cutting tool strategy that emphasises modularity and predictable performance. Contact Metav Werkzeuge for tailored tooling advice and procurement of the Teknik Makina U726TM — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical information Article number: U726TM Manufacturer: Teknik Makina Core technical data Diameter: 26 mm Total length: 187 mm Cutting length: 104 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.539 kg Special features Compatible inserts: SPMG 07T3 Suitable insert manufacturers: Taegutec, YG-1 eClass: 21180201 FAQ Which insert type fits this drill body? The drill body accepts SPMG 07T3 indexable inserts; this standardised format enables use of inserts from suppliers such as Taegutec and YG-1. What clamping interface is required for secure use? A toolholder that accommodates a 25 mm shank diameter with sufficient clamping length matches the drill body’s interface and helps maintain low runout. How deep can holes be made with this tool? The effective cutting length is 104 mm, which defines the recommended depth for single-pass drilling to achieve consistent hole quality. Is the drill body suitable for high-volume production? Yes; the indexable design and standard insert availability support quick edge changes and predictable performance suited to repetitive production work. What are the overall dimensions and mass for planning tool setups? Total length is 187 mm and the weight is 0.539 kg, providing a compact, manageable profile for most machining centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Drill 104mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of a robust combination of precise holemaking and reliable insert compatibility for consistent production results; the tool supports quick insert changes and secure clamping for reduced downtime. Order the drill directly via Metav Werkzeuge or consult the team for application advice. Indexable drill U620TM — 26 mm, 104 mm cutting length (Teknik Makina) Indexable drill U620TM designed for medium‑depth drilling with replaceable Korloy inserts, suitable for a wide range of shopfloor applications 26 mm nominal diameter 104 mm effective cutting length 25 mm shank for secure clamping Compatible with Korloy WCM‑0503 inserts High productivity through optimised cutting geometry The U620TM body is engineered for efficient chip evacuation and stable cutting, delivering a consistent hole quality across medium‑depth bores. With a 26 mm diameter and a 104 mm cutting length, the tool reduces the need for multiple operations by combining reach and rigidity. The use of indexable inserts allows rapid replacement when edges wear, lowering machine downtime and inventory costs while maintaining a steady cycle time. These characteristics translate into measurable productivity improvements in series production environments. Secure clamping and vibrational stability for repeatable results A 25 mm shank and a robust tool body ensure reliable clamping in standard holders, improving concentricity and reducing runout. The overall length of 187 mm combined with a 56 mm shank engagement balances accessibility with stiffness, limiting chatter during plunge and peck cycles. The tool’s mass (approx. 0.542 kg) contributes to stable cutting dynamics without compromising handling during setup. For shops aiming to increase first‑pass yield, a stable toolholder interface is a clear technical advantage. Simple insert system that cuts operating costs This indexable design accepts Korloy WCM‑0503 inserts, enabling quick on‑machine changes and consistent edge geometry. The insert system simplifies inventory management—only a small range of inserts is required to cover repeated regrinds or replacements—while delivering uniform surface finish and hole tolerance. For engineers seeking predictable tool life and easier planning of maintenance intervals, the replaceable‑insert concept provides a pragmatic balance between performance and running costs. Practical fit for a broad range of turning and milling centres The drill body is suitable for integration into common machining centres and drilling units that accept a 25 mm shank diameter, providing flexibility for mixed‑fleet workshops. The combination of 26 mm diameter and 104 mm effective cutting length makes the tool a reliable choice for through and blind holes in components where medium‑depth bores are required. Toolroom managers benefit from fewer special tools to stock, and operators appreciate the straightforward assembly and repeatable clamping behaviour. Contact Metav Werkzeuge today to discuss suitability for existing toolholders or to arrange a technical review of the U620TM and its compatible Korloy WCM‑0503 inserts; Metav Werkzeuge offers product advice and reliable supply from Emmerich. Technical data SKU: U620TM Manufacturer: Teknik Makina Article name: Vollbohrer / indexable drill Core data Diameter: 26 mm Overall length: 187 mm Cutting length: 104 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.542 kg Special features Compatible inserts: WCM‑0503 Suitable for insert manufacturer: Korloy Replaceable indexable insert concept FAQ What materials is this drill suitable for? The indexable drill U620TM is designed for general industrial use and, when fitted with the correct Korloy WCM‑0503 inserts, is suitable for a broad range of common workshop materials; selection of insert grade determines the optimal material range. How is insert replacement performed on the U620TM? Insert replacement on the U620TM is performed by loosening the insert clamp, removing the worn WCM‑0503 insert, and seating a new insert; the modular design enables fast, repeatable changes. Which toolholders accept the U620TM shank? The U620TM uses a 25 mm shank and is compatible with standard holders that secure a 25 mm diameter shank; correct clamping length and holder concentricity are advised for best results. Does the U620TM support deep drilling cycles? With a 104 mm cutting length and 187 mm overall length, the tool is aimed at medium‑depth bores; for very deep or specialised cycles, assessment of rigidity and coolant strategy is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Drill 130mm Cutting Length 213mm Overall Length, 25mm Shank - Teknik Makina
Take advantage of a robust indexable drilling solution with a 26 mm cutting diameter and 130 mm cutter length that delivers stable, repeatable results and reduced downtime. Order direct via Metav Werkzeuge or consult our specialists for application-specific recommendations and toolholder matching. Indexable drill Vollbohrer U786TM — 26 mm diameter, 130 mm cutting length (Teknik Makina) Vollbohrer U786TM is an indexable drill body designed for medium‑depth bore operations where rigidity and rapid insert changes are required; ideally used in production and workshop CNC applications. 26 mm cutting diameter 130 mm cutting length 25 mm shank diameter Compatible with Korloy WCM-0503 inserts Stable drilling performance for consistent cycle times The indexable drill body delivers a combination of rigidity and reach that supports stable chip formation and repeatable hole quality. With a 26 mm diameter and 130 mm cutting length, the tool body maintains axial stiffness appropriate for slotting deeper bores while the substantial shank diameter minimises deflection. The result is improved process reliability and fewer scrapped parts, contributing directly to smoother production flows and more predictable machining sequences. Rapid insert changes and cost-effective tooling Designed to accept WCM-0503 indexable inserts from Korloy, the drill body shortens maintenance intervals and lowers tooling costs by separating the cutting edge from the body. Quick insert replacement reduces machine downtime; worn inserts are replaced rather than the whole tool, which improves cost per bore and inventory management. The insert interface is engineered for secure seating to preserve repeatability after each change, aiding consistent surface finish and dimensional accuracy. Practical mounting and handling for workshop use Machining setups benefit from the compact overall length of 213 mm combined with a 25 mm shank and 56 mm shank engagement length. These dimensions support reliable clamping in standard toolholders and enhance concentricity at moderate spindle speeds. At a weight of 0.62 kg, the drill body is straightforward to handle on the shop floor and integrates well with automated tool pre‑setters and magazine systems, helping to speed up tool changes during shift work. Supply reliability and partnership advantages Sourcing this indexable drilling solution through Metav brings practical supply‑chain benefits: Metav’s Emmerich location acts as a quality filter for European customers, backed by a catalogue of over 250,000 products and the trust of more than 48,000 customers. This means robust availability, consolidated procurement and confident long‑term supply — particularly valuable for production environments that require consistent replacement inserts and replacement bodies to avoid unexpected downtime. Contact Metav Werkzeuge for tailored tooling guidance on Teknik Makina indexable drills, insert recommendations and toolholder compatibility — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: U786TM Manufacturer: Teknik Makina Product: Indexable drill Facts Diameter: 26 mm Overall length: 213 mm Cutting length: 130 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.62 kg Special features Compatible inserts: WCM-0503 Compatible insert manufacturer: Korloy eClass: 21180201 FAQ Which insert type fits this drill body? The drill body accepts WCM-0503 indexable inserts; compatibility is specified for Korloy inserts in the product data. What are the principal dimensions to consider for toolholder selection? Key dimensions are a 26 mm cutting diameter, 25 mm shank diameter, 56 mm shank engagement and 213 mm overall length for the U786TM drill body. How does the design affect downtime and tooling costs? Using replaceable WCM-0503 inserts reduces downtime and tooling expenditure because inserts are renewed separately from the drill body rather than replacing the entire tool. Is the drill body suitable for automated tool magazines and presetter use? Yes; the combination of shank length and overall length supports reliable clamping and is compatible with common presetter and magazine workflows. Who manufactured the drill body and what is the SKU for ordering? The drill body is supplied by Teknik Makina and listed under SKU U786TM for procurement and reordering purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Drill 52mm Cutting Length 135mm Overall Length, 25mm Shank - Teknik Makina
Take advantage of the combination of reliable Ø 26 mm cutting diameter, a compact cutting length of 52 mm and a 25 mm shank for secure clamping; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance Indexable drill U120TM — Ø 26 mm | 25 mm shank | Teknik Makina An Indexable drill U120TM designed for efficient, repeatable holemaking in production machining, compatible with Korloy WCM-0503 indexable inserts Ø 26 mm for medium-diameter holes 25 mm shank for stable clamping Cutting length 52 mm for controlled engagement Compatible with Korloy WCM-0503 inserts Consistent hole quality with controlled cutting geometry The U120TM body is conceived to deliver repeatable hole accuracy through a balanced ratio of cutting length and overall length. With a cutting length of 52 mm and an overall length of 135 mm, the design provides the reach required for many setups while limiting unsupported overhang. The tool’s Ø 26 mm diameter paired with a 25 mm shank ensures a robust connection to the toolholder; this improves stability and reduces the risk of runout. In practical terms, this means fewer reworks and a better first-time-right rate in batch production. Improved productivity through rigid mounting and compact design A compact shank seating of 56 mm contributes to reliable clamping in standard holders, translating into improved rigidity at the cutting edge. The tool’s modest mass (approx. 0.42 kg) helps to lower inertial loads during spindle acceleration, which can reduce vibration and extend insert life in cyclic production. These measurable attributes support higher Machining stability and enable efficient cycle times without compromising surface finish or dimensional control, representing a direct benefit for process planners and shop-floor engineers. Straightforward insert management and reduced downtime The indexable design accepts Korloy WCM-0503 inserts, facilitating fast index changes and straightforward inventory management. Using common insert types simplifies procurement and keeps stocking efficient, while the indexable concept avoids complete-tool replacement — only worn cutting edges are renewed. For maintenance regimes this means quicker turnaround, less downtime and a lower total cost of ownership compared with non-indexable alternatives. The U120TM body supports predictable tool-change intervals and simple insert handling. Supply confidence and industrial partnership for scale-up Sourcing through Metav brings centralised availability and a vetted quality filter for the European market. Metav’s offering is backed by a broad product range and long-standing supply reliability from Emmerich, which supports production continuity when scaling batches or introducing new part families. Combined with the technical specification above, this creates a dependable solution for manufacturing environments that require consistent performance and transparent logistics. Contact Metav Werkzeuge today to discuss application suitability for the U120TM indexable drill and to arrange delivery from our Emmerich inventory Technical data Article number: U120TM Manufacturer: Teknik Makina Facts Diameter: 26 mm Cutting length: 52 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 135 mm Weight: 0.42 kg Special features Compatible inserts: WCM-0503 Compatible insert manufacturer: Korloy Tool type: Indexable drill body FAQ What materials is this indexable drill suitable for? The U120TM is an indexable drill body; material suitability depends on the selected Korloy WCM-0503 insert grade and cutting parameters rather than the body itself. How are inserts mounted and changed on the U120TM? Inserts for the U120TM are clamped into the cutter pockets; worn inserts are indexed or replaced without changing the drill body to reduce downtime. Is the shank compatible with standard holders? The U120TM features a 25 mm shank diameter and a 56 mm shank seating length suitable for standard clamping systems that accept this size. Can the U120TM be used in automated tool magazines? Yes, the compact form factor and standard shank dimensions allow integration into systems that accept indexable drill bodies of this size. What is the benefit of choosing indexable over solid drills for production? Indexable solutions like the U120TM permit rapid insert replacement, easier inventory control and lower replacement costs per edge, which is advantageous for medium- to high-volume machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Drill 52mm Cutting Length, 56mm Shank Length, 25mm Shank Ø - Teknik Makina
Benefit from a robust indexable cutting system combined with a Ø26 mm cutting diameter and a secure 25 mm shank for stable clamping and consistent hole quality; order the insert drill directly via Metav Werkzeuge or consult our technical advisors for production-ready setup. Vollbohrer — Insert drill, Ø26 mm, 25 mm shank (Teknik Makina) The Vollbohrer is an indexable insert drill engineered for precise and efficient holemaking in machining centres and engineering workshops. Ø26 mm cutting diameter, robust performance 52 mm cutting length for deeper holes 25 mm shank for secure clamping Compatible with SPMG 07T3 indexable inserts Increase throughput with a stable indexable system The insert drill delivers predictable cycle times thanks to its indexable insert concept and optimised geometry. With a 52 mm cutting length and Ø26 mm diameter, the tool enables deeper holemaking without compromising process stability. The insert-based system reduces downtime for tool changes: worn inserts are exchanged quickly, restoring cutting performance without the need for regrinding. This makes the tool particularly suitable for medium- to high-volume production where reduced non-productive time is a priority. Secure clamping and machining reliability A 25 mm shank and a total length of 135 mm give the cutter the rigidity required for repeatable results in batch production. The moderate mass of 0.423 kg contributes to low spindle load while maintaining stability at typical drilling feeds and speeds. Compatibility with industry-standard indexable plates ensures repeatable seat geometry and consistent cutting edge position, which supports reliable tolerances and surface finish in drilled bores. Flexible insert options and proven compatibility Designed for use with SPMG 07T3 indexable plates, the drill accepts inserts from leading manufacturers such as Taegutec and YG-1, enabling process optimisation through choice of grade and coating. The insert format permits selection of carbide grades and coatings best suited to the workpiece material and cutting conditions, from general-purpose steels to specialised alloys. This flexibility supports faster ramp-up to stable cutting parameters and extends effective tool life through tailored insert selection. Practical considerations for workshop integration The tool is straightforward to integrate into existing toolholders and collets that accept a 25 mm shank. Its indexable design minimises inventory complexity: a small set of spare inserts covers many operating conditions, while the clamping interface reduces the need for specialised regrinding equipment. For production planners, the combination of repeatable geometry and readily available insert options reduces the lead time for tool supply and maintenance. For tailored advice, spare-part planning or supply from our Emmerich distribution hub, contact Metav Werkzeuge for precise specification support and next-step logistics — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U926TM Manufacturer: Teknik Makina Measurements Diameter: 26 mm Overall length: 135 mm Cutting length: 52 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.423 kg Special features Compatible inserts: SPMG 07T3 Suitable insert manufacturers: Taegutec, YG-1 Indexable insert drilling system FAQ What materials is this insert drill suitable for? The Vollbohrer insert drill U926TM from Teknik Makina is primarily intended for steel and common engineering alloys; selection of the correct SPMG 07T3 insert grade determines suitability for harder or more abrasive materials. Which insert format fits this tool? This indexable drill accepts SPMG 07T3 plates; inserts from Taegutec and YG-1 are compatible and recommended for straightforward procurement and grade variety. How deep can holes be drilled with this cutter? The tool provides a cutting length of 52 mm and an overall length of 135 mm, allowing reliable drilling to the specified cutting depth while preserving stability and surface quality. Is the shank suitable for standard toolholders? With a 25 mm shank diameter, the cutter is compatible with holders and collets designed for that shank size; clamping rigidity supports repeatable holemaking in production settings. What are the main advantages of using an indexable insert drill over a solid drill? Indexable systems such as the Vollbohrer (U926TM) enable quick insert replacement, lower reconditioning costs and faster return to nominal cutting performance, which is beneficial in series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Drill 78mm Cutting Length 161mm Overall Length, 25mm Shank - Teknik Makina
Benefit from precise, repeatable drilling with a 26 mm diameter and a long 78 mm cutting length; compatibility with Korloy WCM-0503 inserts ensures fast indexable-insert changes and reliable cycle times—order via Metav Werkzeuge or consult the technical team for integration advice. Solid Drill U162TM – indexable-insert drill, 26 mm diameter, Teknik Makina The Solid Drill U162TM is an indexable-insert solid drill designed for depth-capable drilling where secure clamping and predictable chip control are required Precision 26 mm diameter 78 mm cutting length Compatible with Korloy WCM-0503 inserts 25 mm shank diameter for secure clamping Consistent chip control and deep-hole capability for production runs The U162TM is engineered as an indexable-insert solution to deliver repeatable results when a longer effective cutting length is needed. With a 78 mm cutting length and a 26 mm diameter, the tool provides the reach necessary for deeper pockets and stepped bore operations while maintaining stable chip evacuation. The insert-based approach reduces downtime during tool changes: worn inserts are replaced in seconds rather than requiring whole-tool replacement, which improves throughput and lowers tooling consumption per component. This makes the tool particularly suitable where process stability and short tool-change cycles are priorities Stable holding and geometry that reduce vibration A robust 25 mm shank and an overall length of 161 mm combine to give secure clamping and predictable dynamic behaviour in most common toolholders. The specified shank dimension supports conventional clamping systems and helps to reduce run-out, which directly benefits hole quality and tool life. At a measured weight of 0.494 kg, the assembly balances inertia and rigidity for many machining setups; the result is fewer chatter marks and better surface finish without complex adaptations to the spindle. Clear specification of shank and length simplifies fixture planning and tool setup for production environments Simple integration into workshop stock and maintenance routines Compatibility with Korloy WCM-0503 inserts means readily available cutting edges and a familiar insert geometry for many users, easing inventory planning and ensuring fast replacement. The tool’s modularity supports predictable maintenance cycles: scheduled insert changes and standard clamping checks keep the process lean. Technical teams benefit from documented dimensions—26 mm diameter, 78 mm cutting length, 25 mm shank and 161 mm overall length—when configuring holders or programming cycle depths. For purchasers seeking a pragmatic balance of reach, rigidity and straightforward serviceability, this indexable-insert solution integrates into existing tooling systems with minimal disruption For a tailored recommendation on integrating the Teknik Cutting Tools Solid Drill U162TM into production, contact Metav Werkzeuge for technical consultation and supply options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U162TM Manufacturer: Teknik Cutting Tools Product type: Solid drill (indexable-insert) ECLASS: 21180201 Numbers / Core technical data Diameter: 26 mm Cutting length: 78 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 161 mm Weight: 0.494 kg Designs / Special features Compatible inserts: Korloy WCM-0503 Files: 62de7ec3a9cff922f4703d40, 62de7ddaa9cff922f4703d13 SKU: U162TM FAQ Which insert type fits this drill? The Solid Drill U162TM accepts Korloy WCM-0503 indexable inserts, which are specified for quick replacement and standard insert geometries. What are the main dimensions to consider for toolholding? Key dimensions for mounting and programming are: 26 mm diameter, 25 mm shank diameter, 78 mm cutting length and 161 mm overall length for the U162TM. Is the shank suitable for common clamping systems? Yes, the 25 mm shank of the U162TM is intended for secure clamping in standard holders compatible with that diameter. How does the insert-based system affect maintenance? Using Korloy WCM-0503 inserts allows rapid edge changes for the U162TM, reducing downtime and simplifying spare-part inventories. Can the tool be used for longer cycle production? The U162TM’s combination of a long cutting length and stable shank geometry supports repetitive production cycles where consistent hole quality is required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Schnellere Fertigung durch präzise Vollbohrer für industrielle Bearbeitungen
Vollbohrer, auch bekannt als Massivbohrer oder Durchgangsbohrer, sind speziell entwickelte Zerspanungswerkzeuge zum direkten Einbringen von Bohrungen in massives Werkstückmaterial. Sie werden bevorzugt auf Drehmaschinen und Bearbeitungszentren eingesetzt, um in einem einzigen Arbeitsgang große Materialvolumina wirtschaftlich abzutragen.
Effiziente Funktion und technischer Kontext für robuste Anwendungen
In der Praxis ermöglichen Vollbohrer das Bohren ohne vorheriges Zentrieren oder Vorbohren, wodurch Rüstzeiten reduziert werden. Bei Varianten ohne Innenkühlung wird der Kühlschmierstoff über externe Maschinendüsen zugeführt; diese Auslegung ist jedoch nur bei extrem kurzen Bohrtiefen und sehr leicht zerspanbaren Materialien geeignet, da produzierte Späne den Bohrkanal schnell verschließen können. Industrieller Standard sind Vollbohrer mit Innenkühlung: durch den Werkzeugkörper verlaufende Kanäle transportieren das Kühlmittel unter hohem Druck direkt an die Schneiden der Bohrerspitze. Dadurch werden Reibungswärme abgeführt und Spänemengen zuverlässig aus dem Bohrloch gespült, was ein Festklemmen, Riefenbildung und plötzliche Werkzeugbrüche effektiv verhindert.
Optimierte Produktion: Konkrete Vorteile für die Fertigung
- Reduzierte Rüstzeit durch Bohren in einem Arbeitsgang mit Vollbohrer oder Einstufenbohrer.
- Verbesserte Spanabfuhr dank innenliegender Kühlmittelkanäle, die die Standzeit verlängern.
- Minimiertes Bruchrisiko durch gezielte Kühlung und Druckspülung an der Bohrerspitze.
- Höhere Prozesssicherheit bei der Bearbeitung großer Materialvolumina auf Bearbeitungszentren.
- Anpassbar an Maschinentyp: Vollbohrer und Durchgangsbohrer sind für Drehmaschinen und Fräszentren verfügbar.
Metav als starker Partner für Beschaffung und Beratung
Metav fungiert als Qualitätsfilter und bietet mit Sitz in Emmerich ein lückenloses Sortiment für präzise Werkzeuge. Mit über 48.000 Kunden und mehr als 250.000 Produkten reduziert Metav die Lieferantenanzahl und liefert verlässlich an die Werkbank. Das Sortiment umfasst sorgfältig ausgewählte Vollbohrer, Massivbohrer und Durchgangsbohrer sowie Beratung zur richtigen Auslegung von Innenkühlung und Schneidengeometrie.
Kurz und prägnant: Wann Vollbohrer die beste Wahl sind
Für Anwendungen, in denen Bohren in einem Durchgang, sichere Spanabfuhr und maximale Prozesssicherheit gefordert sind, sind Vollbohrer die bevorzugte Lösung. Vollbohrer sowie die Varianten Massivbohrer und Durchgangsbohrer sorgen für effiziente, zuverlässige Bohrprozesse in der Serien- und Einzelfertigung.
FAQ
Was ist der Unterschied zwischen Vollbohrer mit Innenkühlung und ohne Innenkühlung?
Vollbohrer mit Innenkühlung führen das Kühlmittel durch Kanäle im Werkzeugkörper direkt an die Schneide und ermöglichen so effektive Wärmeabfuhr und Spantransport; Varianten ohne Innenkühlung werden von außen über Maschinendüsen gekühlt und eignen sich nur für sehr kurze Bohrtiefen und weiche Materialien.
Warum reduziert die Innenkühlung das Risiko von Werkzeugbruch bei Vollbohrern?
Die Innenkühlung führt das Kühlmittel unter hohem Druck an die Bohrerspitze, wodurch Reibungswärme reduziert und Späne aus dem Bohrloch gespült werden; dadurch werden Festklemmen und riefenbildung vermieden, was Werkzeugbrüche verhindert.
Auf welchen Maschinentypen werden Vollbohrer typischerweise eingesetzt?
Vollbohrer und ihre Synonyme Massivbohrer sowie Durchgangsbohrer werden hauptsächlich auf Drehmaschinen und Bearbeitungszentren eingesetzt, dort ermöglichen sie das wirtschaftliche Abtragen großer Materialmengen in einem Arbeitsgang.
Wie unterstützt Metav bei der Auswahl des passenden Vollbohrers?
Metav bietet ein umfangreiches Sortiment und fachkundige Beratung aus Emmerich; Kunden profitieren von Produktauswahl, technischen Informationen zur Innenkühlung und Empfehlungen für die passende Schneidengeometrie.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com