Vollbohrer für effizientes Tiefbohren in Massivwerkstoff
Vollbohrer ermöglichen das direkte Einbringen von Bohrungen in Massivwerkstoff und sparen durch den Einsatz auf Drehmaschinen und Bearbeitungszentren wertvolle Prozesszeit, indem sie große Materialvolumina in einem Arbeitsgang abtragen; dabei bietet die Variante mit Innenkühlung die notwendige Kühlmittelzufuhr, um hohe Reibungswärme abzuführen und Späne sicher aus dem Bohrloch zu spülen, während Ausführungen ohne Innenkühlung nur für sehr kurze Bohrtiefen und leicht zerspanbare Materialien geeignet sind; als Synonyme gelten Massivbohrer und Vollkernbohrer, die in der Zerspanung vor allem durch ihre Standzeit und Prozesssicherheit überzeugen.
20mm Solid Drill 60mm Cutting Length 25mm Shank, 139mm Overall Length - Teknik Makina
Take advantage of a compact, insert-compatible drilling solution that combines reach and stability: a 20 mm cutting diameter with a 25 mm shank provides secure clamping and repeatable holemaking, while compatibility with Korloy WCM-0402 inserts reduces tooling inventory. Order the U150TM indexable drill directly via Metav Werkzeuge or ask our consultants if needed. U150TM indexable drill — 20 mm diameter, 25 mm shank (Teknik Makina) The U150TM indexable drill is a robust drill body designed for insert-based holemaking, offering stable clamping and extended reach for deep-hole operations 20 mm diameter for standard hole sizes Compatible with Korloy WCM-0402 inserts 25 mm shank for stable clamping 60 mm cutting length for deeper holes Engineered for efficient, repeatable drilling with insert technology The U150TM is built as an indexable insert drill body, delivering a rational improvement to cycle times through reduced regrind and quick insert changes. With a 20 mm nominal diameter and an insert specification of WCM-0402, the tool converts insert life and edge geometry into consistent hole quality. The use of indexable inserts allows the cutting edge to be replaced in seconds, which reduces machine downtime and simplifies tool management in volume production. The design emphasises axial stiffness and reliable chip evacuation so that productive cutting parameters can be exploited without sacrificing process stability. Precision clamping and extended cutting length for varied applications A 25 mm shank provides a secure interface for conventional chucks and holders, improving runout control and repeatability on lathes and machining centres. The 60 mm cutting length together with a 139 mm overall length gives access to deeper bore features while maintaining sufficient overhang control; the shorter 56 mm mounting length is optimised to balance reach and rigidity. These dimensions support operations where both access and form tolerance matter, such as stepped bores and through-holes in medium-duty workpieces. The result is measurable process reliability and reduced scrap rates through improved concentricity and surface finish. Compatibility, workshop efficiency and trust in supply Compatibility with Korloy inserts (WCM-0402) reduces tooling complexity for workshops that already standardise on that insert family. The drill body’s lightweight construction (approx. 0.344 kg) eases handling during set-up and is compatible with automated tool changers where compact mass helps maintain balance. By focusing on transferable insert systems and straightforward clamping geometry, this drilling solution supports lean inventory strategies and faster set-ups — benefits that directly contribute to lower unit costs and steadier throughput on production lines. For procurement or a technical evaluation of fitment with existing holders and inserts, contact Metav Werkzeuge to discuss the U150TM indexable drill and available supply options Technical data SKU: U150TM Product type: Indexable drill body Brand: Teknik Makina Compatible insert: WCM-0402 Compatible insert manufacturer: Korloy Core measurements Diameter: 20 mm Shank diameter: 25 mm Cutting length: 60 mm Mounting length: 56 mm Overall length: 139 mm Weight: 0.344 kg Features & compatibility Insert-based cutting system Designed for secure clamping and reduced runout Suited to through-hole and recessed drilling tasks Lightweight construction for easy handling Matches Korloy WCM-0402 insert geometry FAQ What insert type does this drill use? The drill accepts WCM-0402 indexable inserts; the body is manufactured to interface precisely with that insert geometry. Is the shank suitable for standard tool holders? The 25 mm shank is compatible with common clamping systems and offers stable mounting for accurate holemaking. What maximum reach does the tool provide? With a 60 mm cutting length and 139 mm overall length, the body is intended for medium-depth drilling where access beyond the face is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Drill 80mm Cutting Length, 56mm Shank Length, 25mm Shank Diameter - Teknik Makina
Take advantage of robust drill geometry, reliable insert compatibility and a compact 25 mm shank for secure clamping — ideal for steady production runs; order directly via Metav Werkzeuge or consult our specialists if clarification is needed. U608TM Solid drill — 20 mm diameter, 159 mm overall length (Teknik Cutting Tools) The U608TM Solid drill is a precision cutting tool for indexable-insert drilling, designed for shop-floor and CNC applications where repeatability and fast insert changes are required 20 mm cutting diameter 159 mm overall length Compatible with Korloy WCM-0402 inserts 25 mm shank for rigid clamping Greater rigidity for consistent hole quality The drill body is engineered to provide high rigidity through a 25 mm shank and compact proportions. With a 20 mm cutting diameter and 159 mm overall length, the tool minimises deflection under load, which helps to maintain concentricity and hole tolerance across a production batch. The 80 mm cutting length offers an effective balance between reach and stiffness, reducing chatter and the need for rework — a direct efficiency gain for repetitive drilling operations. Fast insert changes to reduce downtime Compatibility with Korloy indexable inserts (type WCM-0402) allows quick replacement of the cutting edge without full regrinding of the body. Indexable inserts mean predictable wear cycles and straightforward tool maintenance: once an insert edge dulls, replacing the small insert restores cutting performance within minutes. This approach supports a better cost-per-hole ratio and simplifies tooling logistics in multi-shift environments. Practical handling and workshop integration At just 0.383 kg, the tool body is easy to handle when mounting or during tool-change procedures while the 25 mm shank ensures secure clamping in standard holders. The combination of defined dimensions and a stable shank facilitates fast setup and repeatable positioning in both manual and automated toolholders. For operators less familiar with insert-based drilling, indexable systems replace the need for specialist regrinding and provide a predictable maintenance rhythm. For tailored advice on Teknik Cutting Tools' U608TM solid drill and fast delivery from Metav Werkzeuge in Emmerich, contact our consultants for machining recommendations and compatibility checks. Technical data Article number: U608TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Product: Vollbohrer (solid drill) Core dimensions Diameter: 20 mm Overall length: 159 mm Cutting length: 80 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.383 kg Compatibility & features Compatible inserts: WCM-0402 Compatible insert manufacturer: Korloy Designed for indexable insert drilling FAQ Which insert type fits this drill? The U608TM accepts WCM-0402 indexable inserts; the tool body is compatible with inserts from Korloy. What are the overall and cutting lengths? Overall length is 159 mm and cutting length is 80 mm. What shank diameter is required for clamping? The tool uses a 25 mm shank and should be clamped in a holder suited for a 25 mm shank to ensure rigidity. Is this a solid or indexable drill? Although listed as a Vollbohrer, this drill body is designed for indexable-insert operation using WCM-0402 inserts. How heavy is the tool body? The U608TM has a mass of 0.383 kg, aiding handling during tool changes and setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Drill Adapter 8mm Cutting Length 56mm Shank Length 158mm Total Length - Teknik Makina
Take advantage of the combination of fast indexable insert changes, a rigid 25 mm shank for stable clamping and a compact Ø 20 mm cutting diameter to keep downtime low and cycle times consistent; order the tool via Metav Werkzeuge or consult our team for application-specific advice. Indexable Drill Body – Ø 20 mm, 25 mm shank, Teknik Makina Indexable Drill Body designed for short cutting engagements and reliable indexable-insert performance in production environments *Indexable inserts SOMT 0703 compatible *Ø 20 mm cutting diameter *Shank diameter 25 mm for secure clamping *Overall length 158 mm, cutting length 8 mm Reduced downtime through indexable-insert design The tool is configured to accept SOMT 0703 indexable inserts from Taegutec, which enables fast insert replacement without removing the drill body from the machine. This modular concept reduces maintenance time and improves process reliability because only the cutting edges are renewed when worn rather than the whole tool. The result is a measurable productivity improvement when short, repeatable hole cycles are required, and replacement inserts can be stocked economically to avoid production gaps. Rigidity and repeatability for consistent hole quality With a 25 mm shank and an overall length of 158 mm, the tool body is engineered for secure clamping and low run-out. The short cutting length (8 mm) concentrates cutting forces close to the spindle, which helps to stabilise the cut and maintain concentricity. The relatively light mass (0.387 kg) reduces spindle load during acceleration while retaining sufficient mass for vibration damping, supporting reproducible hole geometry in serial production. The solid mechanical concept is aimed at shops prioritising repeatability and tool life. Practical compatibility and simple procurement The drill body is listed under SKU U414TM and supplied by Teknik Makina. It is explicitly matched to SOMT 0703 inserts and the insert manufacturer Taegutec, which simplifies tool selection and spare-parts management. The compact cutting length and standard Ø 20 mm diameter make the body suitable for applications where short through-holes or small-depth drilling is common. For buyers seeking a reliable supply chain, Metav Werkzeuge provides consistent availability and technical guidance to integrate the tool into existing toolholders and changeover routines. For tailored technical advice or to secure the U414TM indexable drill body from Teknik Makina, contact Metav Werkzeuge in Emmerich by email (info@metav-werkzeuge.com) or phone (+49 2822 7131930) for personalised procurement and delivery support. Technical data Article number: U414TM Manufacturer: Teknik Makina Designation: Vollbohrer Dimensions & weight Diameter: 20 mm Overall length: 158 mm Cutting length: 8 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.387 kg Features & compatibility Compatible inserts: SOMT 0703 Compatible insert manufacturer: Taegutec SKU: U414TM FAQ What inserts fit this drill body? The drill body accepts SOMT 0703 indexable inserts; compatibility with Taegutec inserts is specified for efficient replacement. What is the nominal diameter and cutting length of the tool? The tool provides a Ø 20 mm nominal diameter with a cutting length of 8 mm, optimised for short-hole and shallow-depth operations. Which shank dimensions and clamping stability can be expected? The body features a 25 mm shank and a 56 mm shank length, offering secure clamping and improved repeatability for serial drilling. How is the U414TM identified for ordering and stock management? Order or reference the tool by SKU U414TM; the product is supplied by Teknik Makina and can be procured through Metav Werkzeuge. Is this tool suitable for high-volume production? Yes, the indexable-insert concept with SOMT 0703 inserts is designed to reduce downtime and enable rapid edge changes, supporting continuous production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Drill for XC-- 10T304 Indexable Inserts 45mm Cut Length, 25mm Shank - Teknik Makina
Take advantage of a compact, purpose-built drill body that combines compatibility with ISCAR XC-- 10T304 indexable inserts, a secure Torx fastening system and workshop-ready dimensions to keep tool changes fast and production steady. Order or request advice via Metav Werkzeuge for rapid supply and compatibility checks. Solid drill body U050TM — compatible with XC-- 10T304 indexable inserts, 20 mm diameter (Teknik Makina) A solid drill body U050TM designed for indexable-insert drilling, offering a 20 mm working diameter and a total length of 102 mm for integration into standard tool systems. 20 mm diameter for standard metric drills Total length 102 mm, robust body design 56 mm shank length, 45 mm cutting length Compatible with ISCAR inserts, Torx T15 screw Consistent performance through indexable-insert compatibility The core advantage of this drill body is its direct compatibility with XC-- 10T304 indexable inserts, a choice that reduces downtime by enabling rapid insert changes without removing the tool from the spindle. Fitted to a robust body from Teknik Makina, the system supports predictable cycle times because insert replacement is fast and repeatable. For production environments that prioritise throughput, an indexable-insert solution reduces regrinding logistics and inventory pressure while maintaining cutting-edge surface finishes and dimensional consistency. Secure clamping and service-friendly fastening Secure mounting is achieved via a Torx T15 drive and an M4.5x11 fastening screw, a straightforward arrangement that simplifies maintenance and minimises the risk of loosening under machining loads. The 56 mm shank length provides a solid engagement in standard holders, improving run-out stability and thereby preserving the life of the inserts. This configuration supports efficient workshop routines: fewer tool changes, clearer maintenance steps and uncomplicated replacement procedures for operators and maintenance staff alike. Practical dimensions for seamless workshop integration Engineered with a 20 mm bore size, 102 mm overall length, 56 mm shank length and 45 mm cutting length, the body delivers a compact footprint suitable for a wide range of setups. At approximately 0.33 kg, the component is light enough for easy handling but substantial enough to resist vibration in many production scenarios. These dimensions make the body straightforward to stock and pair with existing holders and adaptors, helping to reduce the number of unique items in a tooling drawer and streamlining procurement and setup across multiple machines. Contact Metav Werkzeuge to discuss availability and ensure the Teknik Makina U050TM drill body fits the existing ISCAR XC-- 10T304 inserts and toolholders in the workshop Technical data Article number: U050TM Label: 20mm Vollbohrer XC-- 10T304 L102mm Manufacturer: Teknik Makina Eclass: 21180201 Facts Diameter: 20 mm Total length: 102 mm Shank length: 56 mm Cutting length: 45 mm Weight: 0.33 kg Special features Compatible with XC-- 10T304 indexable inserts Compatible insert manufacturer: ISCAR Torx key: T15 Torx screw: M4.5x11 FAQ Is this drill body compatible with ISCAR XC-- 10T304 inserts? Yes. The U050TM drill body accepts XC-- 10T304 indexable inserts and is specified for use with inserts from ISCAR, ensuring direct compatibility. What are the key dimensions of the drill body? The drill body has a 20 mm diameter, 102 mm total length, 56 mm shank length and 45 mm cutting length; weight is approximately 0.33 kg. Which fastening system secures the insert head? The insert is secured using a Torx T15 driver and an M4.5x11 screw, providing a service-friendly and reliable clamping method. Can this body be used in standard toolholders? Yes. With a 56 mm shank length and standard geometric proportions, the body integrates with typical workshop holders to provide stable engagement and run-out performance. What is the SKU for ordering or referencing this item? The product is listed under SKU U050TM, supplied by Teknik Makina and available through Metav Werkzeuge for European distribution. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Drill for XC-- 10T304 Indexable Inserts 45mm Cutting Length, 56mm Shank - Teknik Makina
Benefit from reliable compatibility with XC-- 10T304 indexable inserts, a compact 102 mm overall length and a 20 mm nominal diameter for consistent hole quality; these attributes support repeatable drilling and short tool-change times. Order the indexable insert drill body directly via Metav Werkzeuge or ask our consultants if additional technical information is required. Indexable insert drill body U24TM – 20 mm, 102 mm overall length (Teknik Makina) Indexable insert drill body U24TM is a compact, insert-compatible drill body engineered for production drilling with XC-- 10T304 indexable inserts and suited to general metalworking applications 20 mm nominal diameter Compatible with XC-- 10T304 inserts 45 mm cutting length 102 mm total length Reliable chip control and consistent hole geometry The design focuses on repeatability and steady chip evacuation, which in practice means more consistently sized holes and fewer interrupted cycles. Using an insert-based cutting edge arrangement rather than a monolithic tip allows fast insert replacement and constant surface quality. The combination of a 20 mm nominal diameter and a 45 mm cutting length offers a balance between rigidity and accessibility, supporting typical workshop and light-production drilling tasks with stable hole walls and reduced rework. Straightforward compatibility that reduces setup time Compatibility with the XC-- 10T304 insert family and the specified Taegutec insert system simplifies inventory and reduces search time for spare parts. Insert changes are secured with a T15 Torx drive and M4.5×11 retaining screw for a reliable, repeatable clamp; this reduces downtime and the need for specialised tools. For customers less familiar with indexable systems: an indexable insert is a replaceable carbide cutting tip, which means worn geometry is renewed in seconds rather than replacing the whole drill body. Durability engineered for continuous operation Manufactured to support everyday workshop demands, the tool body combines a compact 102 mm overall length with a robust shank and a low mass of 0.33 kg, offering both handling ease and sufficient stability. The compact architecture shortens overhang and improves process reliability, especially when machining standard steels and general engineering materials. With clearly defined insert seats and standard fastening hardware, maintenance cycles are shorter and tool life is determined largely by insert choice and cutting parameters rather than the body itself. Choose the Teknik Makina U24TM indexable insert drill body for reliable, repeatable drilling with XC-- 10T304 inserts — contact Metav Werkzeuge in Emmerich for ordering or technical advice. Technical Data SKU: U24TM Manufacturer: Teknik Makina Product type: Indexable insert drill body Label: 20 mm indexable insert drill body XC-- 10T304 L102mm Core technical data Diameter: 20 mm Total length: 102 mm Cutting length: 45 mm Shank length: 56 mm Weight: 0.33 kg Torx key: T15 Torx screw: M4.5×11 ECLASS: 21180201 Special features Compatible with XC-- 10T304 indexable inserts Suitable inserts manufacturer: Taegutec for XC-- 10T304 indexable inserts (insert system) FAQ Which inserts fit this drill body? The U24TM indexable insert drill body accepts XC-- 10T304 inserts and is compatible with the Taegutec insert system specified for this family. What tools are required for insert changes? Insert fastening uses a T15 Torx drive and an M4.5×11 screw; these standard tools make insert changes quick and repeatable for the drill body. Is the tool suitable for heavy interrupted cuts? The compact 102 mm overall length and 20 mm nominal diameter provide improved rigidity; however, cutting conditions and insert grade should be selected according to the specific application to manage interrupted cuts. How does the indexable design benefit workshop workflows? By replacing only the worn insert rather than the whole tool, the indexable concept reduces tooling cost per hole and minimises downtime, supporting continuous production and easier stock management. What mounting or shank information is relevant for machine setup? The drill body offers a shank length of 56 mm and a compact overall length of 102 mm, enabling short overhang setups that improve stability and hole accuracy. Manufacturer / Responsible: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Solid Drilling Bit 60mm Cutting Length, 56mm Shank - Teknik Makina
Efficient medium‑depth holemaking with a Ø 20 mm cutting diameter and a 60 mm cutting length, paired with a 25 mm shank for stable clamping; this combination supports consistent cycle times and straightforward tool changes. Order the indexable insert drill U018TM directly via Metav Werkzeuge or consult our specialists for application advice. Indexable Insert Drill U018TM — Teknik Makina, Ø 20 mm, 25 mm shank A Indexable Insert Drill U018TM engineered to deliver flexible, high‑precision holemaking in machining and workshop environments. Ø 20 mm cutting diameter 25 mm shank for secure clamping 60 mm effective cutting length Compatible with Korloy SPMT 0702 inserts Consistent performance for repeatable production The U018TM is designed for reliable, repeatable drilling in series and single‑piece production. Its Ø 20 mm diameter combined with a 60 mm cutting length provides a balanced ratio of stiffness and reach, helping to maintain hole quality across batches. Where process stability matters, the geometry minimises vibration and assists in achieving uniform surface finish and concentricity, which reduces rework and scrap. The tool’s 139 mm overall length gives adequate reach for most fixture setups without compromising rigidity. Secure clamping that reduces runout and tool life variation A robust 25 mm shank and a 56 mm shank length ensure secure clamping in standard toolholders, promoting stable clamping and reduced radial runout. Lower runout translates directly to longer insert life and more predictable cycle times. For production environments that demand dimensional accuracy, this design characteristic supports tighter tolerances and fewer interruptions for adjustments, improving overall operational efficiency. Flexible insert system for fast indexability and cost control Compatibility with Korloy SPMT 0702 inserts enables quick index changes and keeps spare‑part inventories manageable. The indexable insert system means cutting edges can be renewed in seconds rather than replacing an entire drill, delivering clear cost advantages for maintenance and minimising machine downtime. The tool’s modest mass (about 0.353 kg) eases handling during tool set‑up and reduces inertia effects during rapid tool changes. Practical design for workshop and manufacturer use Engineered with production realities in mind, this drill combines a compact form with practical features to fit into mixed workshop fleets. The indexable insert concept supports a wide range of materials and reduction of tooling complexity when paired with suitable inserts from Korloy. For small‑series shops and industrial settings alike, the tool offers an efficient path to precise, repeatable holes without excessive inventory or specialised equipment. Contact Metav Werkzeuge for an application review or to request a detailed technical quote for the Indexable Insert Drill U018TM; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U018TM Manufacturer: Teknik Makina Compatible inserts: SPMT 0702 Compatible insert manufacturer: Korloy Facts Cutting diameter: 20 mm Shank diameter: 25 mm Cutting length: 60 mm Shank length: 56 mm Overall length: 139 mm Weight: 0.353 kg Features Indexable insert drill Compatible with Korloy SPMT 0702 inserts Files available: 62de7dd60f56dbb4de4dbedc, 62de7ec2148ec6b71020ffa4 FAQ Which inserts fit this drill? The Indexable Insert Drill U018TM is specified for Korloy SPMT 0702 inserts; these inserts provide fast indexability and are widely available for varied cutting conditions. What hole size and depth does it support? This tooling delivers a 20 mm hole diameter with an effective 60 mm cutting length, suitable for medium‑depth drilling tasks in production and workshop settings. What shank and clamping requirements apply? A 25 mm shank with a 56 mm shank length is required for secure clamping; this ensures lower runout and stable cutting behaviour for the U018TM from Teknik Makina. Is the tool suitable for small‑series production? Yes, the indexable insert concept of the U018TM supports quick insert changes and economical edge renewal, making it well suited to small‑series and batch production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21.5mm Solid Carbide Boring Bar 63mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of precise indexable‑insert drilling with a Ø 21.5 mm cutting diameter and a 25 mm shank for straightforward toolholder integration, plus a 63 mm effective cutting length for extended reach; order directly via Metav Werkzeuge or ask the in‑house consultants for compatibility advice. Teknik Makina solid drill U821-1TM — Ø 21.5 mm, compatible with SPMG 0602 The U821-1TM solid drill is a compact indexable‑insert drilling solution designed for reliable repeatability in production environments where quick insert replacement and consistent hole quality are required. Solid drill for SPMG 0602 inserts Ø 21.5 mm drilling diameter 25 mm shank for standard holders 63 mm effective cutting length Consistent hole quality through engineered geometry The U821-1TM is built as a solid drill configured for indexable inserts, which supports consistent hole dimensions and repeatable performance across production runs. The tool’s Ø 21.5 mm diameter and defined 63 mm cutting length reduce the need for multiple setups by providing a predictable cutting envelope. Using indexable inserts means only the small carbide insert needs replacing when wear occurs, limiting downtime and lowering per‑hole operating costs while maintaining a stable cutting geometry. Fast integration with common insert systems and holders A measured 25 mm shank and a 56 mm shank length allow straightforward fitting into existing toolholders without special adaptors, easing retrofit and tool change processes. The drill accepts SPMG 0602 indexable inserts and is compatible with insert suppliers such as Taegutec and YG‑1, which simplifies procurement and ensures access to a broad insert portfolio. The combination of standardised interface and widely available inserts enables efficient inventory management and predictable procurement cycles. Designed for repeatability, handling and shop‑floor reliability With an overall length of 142 mm and a net weight of 0.377 kg, the tool offers a balance between rigidity and manoeuvrability for typical workshop handling. The indexable‑insert concept reduces the volume of expensive solid tooling held in stock and minimises waste by replacing inserts rather than entire drills. The tool’s construction prioritises repeatable clamping and straightforward maintenance, supporting continuous production where predictable tool life and simple replenishment are decisive advantages. For straightforward retrofit and secure supply, request the Teknik Makina U821-1TM from Metav Werkzeuge — Metav’s team can advise on insert selection and delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange procurement and technical guidance Technical data Article number: U821-1TM Manufacturer: Teknik Makina Compatible inserts: SPMG 0602 Facts Diameter: Ø 21.5 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.377 kg Special features Indexable‑insert design Compatible with Taegutec inserts Compatible with YG‑1 inserts FAQ Which insert type does this solid drill use? The U821-1TM accepts SPMG 0602 indexable inserts for economical replacement and consistent cutting geometry. Which manufacturers’ inserts are compatible? The tool is compatible with inserts from Taegutec and YG‑1, offering flexibility in sourcing replacements. What are the key dimensions to check for toolholder compatibility? Key dimensions are a 25 mm shank diameter and 56 mm shank length; overall length is 142 mm and cutting length is 63 mm. What is the exact drilling diameter of the tool? The drill provides a nominal drilling diameter of Ø 21.5 mm. What is the article number and who made the tool? The article number is U821-1TM and the tool is supplied by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21.5mm Solid Drill 63mm Cutting Length, 56mm Shank Length, 142mm Overall - Teknik Makina
Take advantage of a rigid drill body with a generous 63 mm cutting length and a secure 25 mm shank to keep cycle times low and regrinding effort minimal; order directly via Metav Werkzeuge or consult the technical team for application matching. Vollbohrer (indexable drill body) by Teknik Makina — Ø 21.5 mm, 63 mm cutting length The Vollbohrer (indexable drill body) is designed for high-efficiency holemaking in industrial machining, accepting WCM-0402 indexable inserts for stable, repeatable performance in medium-deep drilling operations. *Suitable for WCM-0402 inserts *Ø 21.5 mm cutting diameter *63 mm cutting length *25 mm shank diameter Increased production throughput thanks to a stable drill body The rigid design of the drill body delivers consistent centring and chip evacuation, reducing the need for rework and lowering cycle times. With a Ø 21.5 mm cutting diameter and an effective 63 mm cutting length, the tool is optimised for through and medium-depth holes where repeatable hole quality matters. The robust shank, 25 mm in diameter, ensures positive clamping in standard toolholders, contributing to vibration suppression and longer insert life. Simple insert replacement and tooling flexibility for diverse tasks Compatibility with WCM‑0402 inserts from Korloy enables quick seat-and-clamp replacement, avoiding lengthy tool changes and reducing machine downtime. The body accepts standard indexable inserts, meaning inventory can be standardised across multiple tool families. The 56 mm shank length provides sufficient engagement for most holders while the 142 mm overall length balances reach with rigidity, making the system suitable for batch production and trade-shop environments that demand both flexibility and stability. Clear specification for predictable machining results Measured data such as overall length 142 mm, shank Ø 25 mm, and a tool weight of 0.281 kg provide a verifiable basis for process planning and fixture design. The modular approach—drill body plus replaceable inserts—supports a cost-efficient consumable strategy: cutting edges are renewed by replacing small inserts rather than discarding an entire solid tool. This approach reduces material waste and makes cost-per-hole calculation straightforward for production planning. Contact Metav Werkzeuge today for tailored tooling advice and to order the Teknik Makina Vollbohrer U153TM; reference the SKU U153TM when enquiring and benefit from expert guidance from Metav Werkzeuge's technical consultants Technical Data Article number: U153TM Manufacturer: Teknik Makina Product name: Vollbohrer Suitable for insert type: WCM- 0402 Compatible insert manufacturer: Korloy Core specifications Cutting diameter: 21.5 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.281 kg ECLASS: 21180201 Special features Indexable drill body for replaceable inserts Compatible with Korloy WCM-0402 inserts Balanced overall length for reach and rigidity FAQ What insert type fits this drill body? The drill body accepts WCM‑0402 indexable inserts; Korloy is listed as the compatible insert manufacturer for this configuration. Which diameter and lengths are specified for the tool? The tool has a cutting diameter of 21.5 mm, an overall length of 142 mm and a cutting length of 63 mm, as supplied under SKU U153TM. Is the shank suitable for standard holders? A 25 mm shank diameter with a 56 mm shank length provides secure clamping in common toolholders used in turning and milling centres. Can this tool be used for deep-hole drilling? The configuration is optimised for medium-depth holes up to the listed 63 mm cutting length; for deeper applications, verification of rigidity and coolant strategy is advised. How does the indexable system reduce running costs? By replacing only the WCM‑0402 inserts rather than the whole body, the cost per cutting edge is reduced and maintenance is simplified, improving overall cost-efficiency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Carbide Drill 42mm Cutting Length, 56mm Shank Length, 25mm Shank Dia - Teknik Makina
Take advantage of the combination of robust build quality, precise 21 mm drilling capacity and straightforward insert replacement to keep cycle times low and maintenance simple; order the indexable drill directly via Metav Werkzeuge or contact our consultants for application advice. Indexable drill U110TM – 21 mm diameter, 121 mm overall length (Teknik Makina) The Indexable drill U110TM is designed for precision holemaking in metalworking setups, offering reliable clamping and insert compatibility for efficient production runs. 21 mm cutting diameter 42 mm cutting length 25 mm shank diameter Compatible with Korloy WCM-0402 inserts Stable clamping for consistent hole quality A rigid 25 mm shank paired with the drill’s construction delivers stable clamping and reduced runout, which translates directly to more consistent bore tolerances and fewer rejected parts. The tool’s geometry and shank interface are chosen to reduce vibration under load, supporting repeatable results in batch production and CNC operations. Emphasis on mechanical stability reduces the need for secondary rework and helps maintain machine spindle life. Deep cutting length for extended reach and fewer tool changes With a 42 mm cutting length and a 121 mm overall length, the tool provides reach for deeper bores without sacrificing rigidity. Longer effective reach means fewer tool changes in multi-step processes and improved workflow on components with recessed holes. The balanced flute design promotes reliable chip evacuation, lowering the risk of chip packing in deep holes and helping to sustain a steady material removal rate. Indexable inserts to lower running costs and downtime Compatibility with Korloy WCM-0402 indexable inserts allows rapid insert changes and a predictable cost-per-hole calculation. Using replaceable inserts reduces tool regrind cycles and permits immediate restoration of cutting performance on the shop floor. The combination of insert standardisation and a purpose-built tool body supports high utilisation rates and simplified inventory management for maintenance teams. Practical fit for workshop and production environments The U110TM’s dimensions—21 mm diameter and 121 mm overall length—make it suitable for many common metalworking tasks where a robust, indexable solution is preferred over solid drills. The relatively low mass facilitates handling during tool setup while the standardised insert pocket enables quick replacement. For procurement, Metav’s Emmerich distribution acts as a reliable quality filter for European operations, ensuring fast availability and consistent product standards. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to specify the Teknik Makina U110TM indexable drill for applications requiring a 21 mm diameter and Korloy WCM-0402 inserts; our consultants will advise on holder choice and delivery options Technical Data Article number: U110TM Manufacturer: Teknik Makina Facts Diameter: 21 mm Overall length: 121 mm Cutting length: 42 mm Shank diameter: 25 mm Holder/adapter length: 56 mm Weight: 0.34 kg Special features Compatible with Korloy WCM-0402 inserts Insert manufacturer: Korloy Tool type: Indexable drill SKU: U110TM FAQ Which insert grade fits this drill most commonly? The U110TM is designed for Korloy WCM-0402 inserts; selection of grade depends on the workpiece material and cutting data. What are the main dimensional limits of the tool? The tool offers a 21 mm diameter, 42 mm cutting length and 121 mm overall length as standard dimensions. Is the shank compatible with common 25 mm toolholders? Yes, the 25 mm shank is suitable for holders and collets designed for that diameter, enabling secure clamping for machining. How does indexable technology affect maintenance? Indexable inserts on the U110TM reduce downtime by allowing fast insert replacement, lowering maintenance effort compared with regrinding solid tools. Can this tool achieve high material removal rates? The tool body and insert combination are intended to support efficient cutting; actual rates depend on workpiece material, insert grade and machine power. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Carbide Drilling Head 84mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of robust indexable-insert compatibility and a secure 25 mm shank for consistent, repeatable drilling cycles; the 84 mm cutting length enables deep, productive cuts while the compact 163 mm overall length simplifies tool storage and handling. Order directly via Metav Werkzeuge or ask our consultants for machining recommendations. Indexable Insert Drill U610TM — 21 mm diameter, 163 mm overall length (Teknik Makina) The Indexable Insert Drill U610TM is a drill body engineered for insert-based drilling in industrial CNC and production environments, compatible with Korloy WCM‑0402 inserts for cost-efficient machining. 21 mm diameter for medium-depth drilling Compatible with Korloy WCM‑0402 inserts 84 mm cutting length for deep operations 25 mm shank for secure clamping Faster throughput by using indexable inserts This drill body is designed to support indexable inserts, which reduce downtime and lower per-hole tooling costs compared with one-piece drills. The use of Korloy WCM‑0402 inserts means cutting edges can be rotated or replaced rapidly, restoring cutting performance without full tool changeover. For production environments this translates into higher machine availability, predictable tool-change cycles and a more economical cost-per-hole calculation — particularly when drilling long runs or mixed-batch work. Secure clamping and stable tool engagement for repeatability A 25 mm shank ensures reliable clamping in standard tool holders and chucks, promoting concentricity and consistent hole quality. The combination of a 21 mm diameter and 84 mm cutting length gives a balance between rigidity and reach: sufficient engagement for deeper holes without excessive deflection. The tool’s 0.411 kg mass contributes to stable spindle behaviour, and the 163 mm overall length keeps the assembly compact, simplifying handling and storage in busy toolrooms. Practical workshop benefits and material guidance As an insert-compatible drill body, the tool offers straightforward maintenance procedures and rapid reconditioning of the cutting geometry via insert changes. This approach is particularly beneficial where mixed materials are machined and inserts can be selected for specific workpiece requirements. The drill body is supplied with clear dimensional data and is suited for integration into standard CNC drilling workflows; its compatibility with established Korloy inserts supports spare-part availability and predictable supply chains. For production-ready indexable drilling consult Metav Werkzeuge about stock and technical matching for the U610TM; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific machining tasks Technical data Article number: U610TM Manufacturer: Teknik Makina Product name: Indexable Insert Drill (Vollbohrer) Core dimensions Diameter: 21 mm Overall length: 163 mm Cutting length: 84 mm Shank length: 56 mm Shank diameter (clamping): 25 mm Weight: 0.411 kg Compatibility & special features Compatible inserts: WCM‑0402 Compatible insert manufacturer: Korloy Suitable for insert-based drilling operations SKU: U610TM FAQ What insert types does this drill accept? The U610TM is designed for WCM‑0402 indexable inserts and is compatible with inserts from Korloy for quick edge replacement. Which shank size is required for secure clamping? A 25 mm shank diameter is specified for clamping; use a holder or chuck rated for a 25 mm shank to ensure concentricity. How deep can this tool cut effectively? The tool provides an 84 mm cutting length, suitable for medium-to-deep drilling tasks while maintaining rigidity. Is the U610TM suitable for high-volume production? Yes — the indexable-insert design supports rapid insert changes and predictable tool life, which benefits high-volume production runs. What are the overall dimensions for tool planning? Overall length is 163 mm with a 21 mm nominal drilling diameter; these dimensions simplify tool-change planning and storage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Carbide Through Coolant Drill 63mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of the combination of precise indexable drilling, robust clamping and straightforward insert replacement for efficient shop-floor machining; order directly via Metav Werkzeuge or contact the consultants for tailored tooling advice. Vollbohrer U316TM – Indexable insert drill body, 21 mm diameter (Teknik Makina) the Vollbohrer U316TM is an indexable insert drill body designed for medium-depth holemaking in production and workshop environments Diameter 21 mm for standard hole sizes Compatible with Taegutec SOMT 0703 inserts 63 mm cutting length for deeper bores 25 mm shank for secure clamping Precision and productivity combined for repeatable holemaking The drill body delivers consistent hole quality through its rigid design and defined cutting length. With a 21 mm diameter and 63 mm of cutting length, the tool reduces the need for multiple operations by enabling single-pass holemaking where material and process allow. The use of indexable inserts means cutting edges can be replaced rapidly, lowering downtime and keeping cycle times short while maintaining dimensional stability across production runs. Cost-efficient machining through replaceable inserts A key economic advantage is the compatibility with Taegutec SOMT 0703 inserts: worn edges are exchanged instead of replacing the entire tool body, which reduces tooling costs and stock complexity. The combination of an exchangeable insert system and a 25 mm shank for secure clamping helps to preserve spindle life and maintain constant run-out, translating into fewer rejected parts and a more predictable cost per hole. Simple integration with common spindle setups The tool’s 141 mm overall length and defined shank geometry allow straightforward mounting in standard holders and adaptors. The compact yet rigid proportions minimise deflection during cutting, which supports tighter tolerances and better surface finishes. For shops upgrading from solid drills, the indexable system provides a rapid return on investment where frequent edge changes or interrupted cuts occur. Practical handling and maintenance on the shop floor At roughly 0.377 kg, the body is easy to handle during insert changes and set-up, without compromising stability when clamped. The clear insert designation and matching manufacturer make re-orders and inventory management simple. Routine maintenance is limited to checking screw torque and insert condition, which keeps maintenance intervals short and predictable. Contact Metav Werkzeuge for personalised tooling recommendations and supply from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the U316TM and suitable insert packages Technical data Article number: U316TM Manufacturer: Teknik Makina Facts Diameter: 21 mm Overall length: 141 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.377 kg Special features Compatible with Taegutec SOMT 0703 inserts Indexable insert drill body Files: 62de7ec1bd24461b3d5f7a4e, 62de7dd60f56dbb4de4dbedb FAQ What materials can be machined with this drill body? The Vollbohrer U316TM from Teknik Makina accepts Taegutec SOMT 0703 inserts and is suitable for general-purpose machining; selection of the correct insert grade determines suitability for steel, stainless steel or cast materials. Which insert type fits the U316TM? This drill body uses SOMT 0703 indexable inserts by Taegutec; using the recommended insert grade for the application ensures the best balance between tool life and surface finish for the U316TM (SKU U316TM). How deep can holes be drilled in a single pass? With a 63 mm cutting length, the tool allows efficient single-pass drilling within that effective cutting zone; deeper bores require staged operations or through-tool coolant solutions depending on material and process. Is the shank compatible with standard toolholders? The 25 mm shank diameter provides secure clamping in common holders; the design of the U316TM supports stable mounting for consistent concentricity and repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Carbide Through Coolant Indexable Drill 84mm Cutting Length, 162mm Overall - Teknik Makina
Take advantage of a precise combination of 21 mm diameter, 84 mm cutting length and a secure 25 mm shank to improve hole quality and cycle-time stability; order the tool directly via Metav Werkzeuge or consult the team for integration advice. Vollbohrer U416TM — Indexable drill body, 21 mm diameter, 25 mm shank (Teknik Makina) A robust Vollbohrer U416TM designed as an indexable drill body for medium-depth bores in production environments; compatible with SOMT 0703 inserts and optimised for secure clamping and repeatable accuracy. 21 mm diameter for standard bores 84 mm effective cutting length 25 mm shank for secure clamping Compatible with SOMT 0703 inserts (Taegutec) Consistent hole quality with an indexable system This indexable drill body delivers repeatable results by combining a stable holder design with an 84 mm cutting length. The geometry is tuned for consistent chip evacuation and reduced runout, which translates into fewer rejected parts and less rework. As an indexable system, the concept separates the body from the cutting edges: worn inserts are replaced quickly without discarding the body, yielding lower running costs and minimal machine downtime. The measured values—21 mm diameter and the specified engagement length—allow planners to predict material removal rates and adapt feeds and speeds with confidence. Stable clamping and process security A secure 25 mm shank and a compact 56 mm holder length ensure the tool seats firmly in the spindle, reducing vibration and improving surface finish. The combination of shank diameter and overall length provides mechanical rigidity that benefits bore straightness and tool life. Reduced vibration lowers insert wear, meaning fewer indexings per production run and more predictable maintenance intervals. These attributes support a stable process window on machining centres where repeatability is decisive for throughput. Plug-and-run compatibility for flexible production planning The tool is specified for use with SOMT 0703 indexable inserts and is compatible with Taegutec insert families, allowing rapid reconfiguration across common insert grades and coatings. For operations running mixed materials, the insert-based approach simplifies grade selection—switching insert geometry or substrate instead of changing the entire tool body. This flexibility supports lean tool inventories and speeds up job changeovers in small-batch or high-mix manufacturing environments. Practical benefits for procurement and workshop teams Lightweight at about 0.417 kg, the drill body is easy to handle during tool assembly and storage while still providing the necessary stiffness for production use. The standardised dimensions make it straightforward to integrate into existing tool lists and holders. From a procurement perspective, selecting an indexable solution that accepts a widely used insert size reduces long-term consumable costs and simplifies supplier management—advantages that align with Metav’s mission to make precision affordable and dependable. Contact Metav Werkzeuge for availability, technical integration guidance and order information for the Teknik Makina indexable drill body U416TM; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: U416TM Manufacturer: Teknik Makina Name: Vollbohrer Facts Diameter: 21 mm Overall length: 162 mm Cutting length: 84 mm Holder length: 56 mm Shank diameter: 25 mm Weight: 0.417 kg SKU: U416TM Special features Compatible inserts: SOMT 0703 Inserts manufacturer: Taegutec Indexable drill body design FAQ Which insert type fits the drill body? The drill body accepts SOMT 0703 indexable inserts; compatible insert grades from Taegutec can be used for different materials and cutting conditions. What are the key dimensions to check for machine setup? Refer to the 21 mm diameter, 162 mm overall length and 25 mm shank when programming spindle reach and verifying holder compatibility for the U416TM. Is the tool suitable for long overhangs? The U416TM is optimised for medium-depth bores; the specified 84 mm cutting length and shank dimensions favour stable setups rather than long overhang operations. How does the indexable concept reduce operating costs? By replacing only the worn SOMT 0703 inserts instead of the entire body, the system reduces consumable spend and shortens machine downtime for tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Carbide Through Drill 105mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of a rigid, workshop-ready drilling solution that pairs Ø21 mm performance with a 25 mm shank and a 105 mm cutting length for stable, repeatable holemaking; order the tooling through Metav Werkzeuge or consult the technical team for application guidance. Indexable drill U781TM — Ø21 mm, 105 mm cutting length A robust U781TM indexable drill designed for precise, deep-hole machining in production environments and general workshop use High-stability 25 mm shank 105 mm cutting length for deep holes Compatible with Korloy WCm-0402 inserts Balanced Ø21 mm body for reliable feeds Consistent hole quality and higher machining efficiency The tool body delivers a rigid drilling platform that reduces vibration and runout, directly improving dimensional repeatability and surface finish. With a Ø21 mm diameter and 105 mm cutting length, this solution enables deeper holemaking without compromising stability. The 25 mm shank contributes to firm clamping in standard toolholders, which reduces micro-movements during interrupted cuts; the result is fewer rework cycles and a measurable improvement in cycle-time efficiency on serial operations. Technical features are translated into operational gains: tighter tolerances and less scrap, supporting a leaner production flow. Rapid tooling change and proven insert compatibility Designed to accept inserts from a major manufacturer, the drill body fits Korloy indexable plates of type WCm-0402, simplifying inventory and set-up. Using a standardised insert format shortens changeover time and lowers tooling costs by allowing re-use of bodies across multiple insert types where applicable. The modular approach makes maintenance straightforward: worn inserts are replaced rather than the entire tool, which reduces overall tooling expenditure and keeps spindle downtime to a minimum. The compatibility also streamlines procurement and ensures that replacement inserts are widely available for continuous operation. Workshop robustness, handling and maintenance advantages Constructed for everyday use in industrial environments, the tool balances cutting performance with serviceability. With an overall length of 184 mm and a body weight of 0.451 kg, handling on the bench and during tool changes is practical while maintaining the mass required for damping. The 56 mm shank engagement length secures axial stability in holders rated for 25 mm shanks. Routine checks for insert seating and clamping torque suffice to preserve accuracy; the modular design avoids complex regrinding and keeps maintenance cycles short. This combination of features supports reliable throughput and predictable tooling life in mixed-production settings. For a tailored recommendation on application parameters or to secure supply of the Teknik Makina U781TM from Metav Werkzeuge — including delivery from the Emmerich site and guidance on compatible Korloy WCm-0402 inserts — contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U781TM Manufacturer: Teknik Makina Product: Indexable drill (U781TM) Facts Diameter: 21 mm Overall length: 184 mm Cutting length: 105 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.451 kg Special features Compatible with Korloy inserts Accepts WCm-0402 insert type Indexable design for insert replacement Suitable for production and workshop use FAQ Which insert type fits this drill? The drill accepts WCm-0402 indexable inserts; the body is specified to match Korloy plate geometry for secure seating and repeatable performance. What is the usable cutting length? The tool provides a cutting length of 105 mm, enabling deeper holemaking while maintaining stability for serial production tasks. What shank size is required for clamping? A 25 mm shank diameter with a 56 mm engagement length ensures secure clamping in compatible holders and supports rigidity during heavy-duty cuts. Is the drill suitable for workshop and production environments? Yes; the indexable-body design and balanced Ø21 mm diameter make the tool well suited to both workshop and industrial production, offering ease of maintenance and predictable tool life. How does the U781TM reduce tooling costs? By using replaceable WCm-0402 inserts, the U781TM limits expenditure to consumable plates rather than full-body replacements, shortening downtimes and lowering long-term tooling spend. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Drill 63mm Cutting Length 56mm Shank Length, 142mm Overall - Teknik Makina
Take advantage of a robust, indexable drill body that combines straightforward maintenance with precise, repeatable holemaking: the 21 mm nominal diameter, coupled with a 25 mm shank and a 63 mm cutting length, delivers consistent results with low downtime. Order via Metav Werkzeuge or contact our advisors for technical clarification. U020TM indexable drill body – 21 mm nominal diameter, 25 mm shank (Teknik Makina) A compact U020TM indexable drill body for medium-depth holemaking, compatible with Korloy SPMT 0702 inserts and designed for secure mounting in 25 mm toolholders. Compatible with SPMT 0702 inserts 21 mm nominal diameter 25 mm shank for secure clamping 63 mm cutting length Consistent hole quality through rigid design The solid construction of this indexable drill body supports stable cutting and helps to reduce runout, which in turn improves hole concentricity and tool life. With a 21 mm nominal diameter and an overall length of 142 mm, the geometry is balanced for machining centres where predictable tool behaviour is required. The relatively low mass at 0.395 kg contributes to smoother acceleration and deceleration on CNC spindles, reducing vibration and helping to protect both spindle bearings and inserts. For buyers seeking dependable repeatability, the mechanical specification emphasises stability and consistent holemaking performance. Reduced downtime thanks to insert compatibility By accepting SPMT 0702 indexable inserts from Korloy, the tool minimises production interruptions for regrinding: worn cutting edges are replaced in seconds rather than hours. This indexable concept separates the cutting geometry from the holder, simplifying inventory and lowering cost per hole over a production run. The result is a pragmatic combination of serviceability and economical operation, especially useful where a rapid switch between fresh cutting edges maintains cycle time and quality. Clear dimensions for straightforward integration Key mounting and cutting dimensions are explicit to aid planning: 25 mm shank, 63 mm cutting length, holder length 56 mm, and 142 mm overall length. These figures allow engineers to assess reach, clamping requirements and compatibility with collets or hydraulic chucks without guesswork. The compact design helps to limit tool overhang, improving rigidity in operations where lateral stability is important. When documenting fixture setups or tool tables, these measurable values give a verifiable basis for choosing suitable holders and reporting expected tool engagement. Supply reliability and partner credentials Sourcing this component through Metav combines access to a wide industrial range with a quality filter at the Emmerich logistics hub. Metav’s long-standing experience in precision tooling ensures consistent product availability and transparent order handling for workshops and production facilities. For procurement teams that value traceability and dependable supply, the combination of a recognised drill-body concept with Metav’s distribution framework supports uninterrupted production planning. For technical advice on Teknik Makina’s U020TM or to arrange procurement through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930; assistance is available to verify toolholder compatibility and delivery options. Technical data Article number: U020TM Manufacturer: Teknik Makina SKU: U020TM ECLASS: 21180201 Facts Diameter: 21 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Holder (tool) length: 56 mm Weight: 0.395 kg Special features Compatible with SPMT 0702 inserts Insert manufacturer compatibility: Korloy Indexable drill body design FAQ Which inserts are compatible with this drill body? The drill body accepts SPMT 0702 indexable inserts; Korloy is specified as the compatible insert supplier for this design. What are the main dimensions to check for integration? Important dimensions are 21 mm diameter, 25 mm shank, 63 mm cutting length and 142 mm overall length; these values should be compared with holder and chuck specifications before ordering U020TM. Is the shank size suitable for standard toolholders? The 25 mm shank is intended for holders and chucks that accept a 25 mm diameter tool; confirm the toolholder clamping range against the shank size for secure mounting. How quickly can inserts be replaced during production? Insert replacement follows the standard indexable-insert routine: worn inserts such as SPMT 0702 are removed and replaced rapidly, significantly reducing downtime compared with regrinding solid tools. Can the drill body be used for deep holes given its overall length? With an overall length of 142 mm and a cutting length of 63 mm, the tool suits medium-depth holemaking; check required reach and tool overhang to ensure rigidity for a given setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Drill 84mm Cutting Length 56mm Shank Length, SPMG 0602 Compatible - Teknik Makina
Take advantage of a robust indexable drilling solution that pairs a stable 25 mm shank with an effective 84 mm cutting length, delivering reliable holemaking and reduced setup time. Order the solid drill directly via Metav Werkzeuge or ask our consultants if needed. Solid drill U721TM — indexable drill with Ø 21 mm and 25 mm shank (Teknik Cutting Tools) A compact solid drill U721TM engineered for indexable-insert drilling with SPMG 0602 inserts, aimed at CNC and turning-centre operations that require repeatable, stable holemaking. *Indexable design for SPMG 0602 inserts *Ø 21 mm cutting diameter *25 mm shank for stable clamping *84 mm cutting length for deep holes Precision geometry that keeps machining consistent The tool’s engineered geometry provides a repeatable cutting action that supports high-quality hole profiles with minimal rework. The combination of a defined cutting length of 84 mm and a focused point geometry reduces run-out sensitivity, which translates into fewer rejected parts and less secondary finishing. This stability is supported by the 25 mm shank, designed for secure clamping in standard toolholders, helping to maintain concentricity over long production runs and enhancing overall process reliability. Compatible system that simplifies tooling logistics Integration with established insert standards is a practical advantage: the drill accepts SPMG 0602 inserts and is compatible with leading insert manufacturers Taegutec and YG-1, enabling straightforward sourcing and replacement. This compatibility reduces inventory complexity and facilitates quick changeovers on the shop floor. The indexable concept separates cutting geometry from the body, so edge refreshment is rapid and cost-effective compared with solid-carbide replacements. Stable handling for continuous operation A compact overall length of 163 mm and a modest mass of 0.387 kg balance rigidity with manoeuvrability, improving tool life and reducing vibration in routine operations. The 25 mm shank and a 56 mm effective clamping zone ensure secure retention in a wide range of holders, which lowers the risk of tool movement during machining and preserves the life of both inserts and machine spindles. These attributes support longer uninterrupted cycles and predictable maintenance intervals. Practical productivity gains on CNC and turning centres Designed for straightforward integration into production, the tool yields measurable efficiency benefits: fewer insert changes, predictable downtimes and consistent bore quality. The indexable design is particularly effective where batch sizes or frequent tool exchanges are common, as the replaceable SPMG 0602 inserts restore cutting performance without the need to replace the entire drill body. For operations seeking to streamline tooling while maintaining performance, this solution offers a pragmatic balance between uptime and consumable costs. For tailored advice on integrating the Teknik Cutting Tools indexable solution into a production cell, contact Metav Werkzeuge in Emmerich for fast supply and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U721TM Manufacturer: Teknik Makina Cutting diameter: 21 mm Overall length: 163 mm Cutting length: 84 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.387 kg Facts Ø 21 mm Total length 163 mm Cutting length 84 mm Shank diameter 25 mm Shank length 56 mm Weight 0.387 kg Special features Compatible inserts: SPMG 0602 Compatible manufacturers: Taegutec; YG-1 SKU: U721TM Brand: Teknik Makina FAQ What insert type does the drill use? The U721TM accepts SPMG 0602 indexable inserts; replacement inserts from Taegutec and YG-1 are compatible. What are the key dimensions for setup? Key dimensions for the solid drill U721TM are Ø 21 mm, overall length 163 mm, cutting length 84 mm and a 25 mm shank diameter. Is the shank suitable for standard toolholders? Yes, the 25 mm shank of the U721TM is intended for stable clamping in common holders used on CNC machines and turning centres. How does using indexable inserts benefit production? Indexable inserts on the U721TM allow rapid edge changes and lower consumable costs compared with full-body replacements, reducing machine downtime and simplifying stock management. Which manufacturers’ inserts are confirmed compatible? Compatibility is confirmed with insert suppliers Taegutec and YG-1 for the specified SPMG 0602 grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Drill Full Cutting Length 63mm Shank 25mm, 142mm Overall Length - Teknik Makina
Benefit from the combination of a 25 mm shank for stable clamping, compatibility with SPMG 0602 indexable inserts and a 63 mm cutting length to maintain consistent hole quality in serial production. Order the indexable drill directly via Metav Werkzeuge or request advice from the technical consultants if needed. Indexable drill — 21 mm diameter, 25 mm shank | Teknik Makina The Indexable drill is a robust insert drill body designed for precision holemaking in high-output machining applications 25 mm shank for robust clamping Compatible with SPMG 0602 inserts 63 mm effective cutting length Suits 21 mm nominal hole diameter Consistent hole quality through rigid clamping and repeatable geometry The design concentrates on mechanical stability: a 25 mm shank and a solid holder geometry reduce runout and support constant cutting conditions. With a 21 mm nominal cutting diameter and an effective 63 mm cutting length, the tool provides a balance between reach and rigidity that benefits batch production. Using an insert-based concept means that wear is localised to the cutting edge, which shortens downtime for regrinding and preserves the tool body for longer service life. This results in repeatable hole tolerances and fewer scrap parts during extended cycles. Fast insert changes and proven compatibility for efficient workflows Compatibility with widely available insert formats such as SPMG 0602 and manufacturers Taegutec and YG-1 makes stocking and replacement straightforward. The drill body’s overall length of 142 mm and modest mass (0.377 kg) contribute to safe handling and easy integration into tool magazines or manual tool changes. The modular approach reduces process complexity: worn inserts are exchanged quickly, restoring cutting performance without complex reconditioning. This approach delivers measurable time savings across multiple setups and supports leaner inventory management. Reliable sourcing and practical integration into production environments Specification transparency aids planning: the holder accepts SPMG 0602 inserts, the shank clamps at 25 mm, and the shank length is 56 mm, which helps with fixture selection and spindle interfacing. Supplied under the Teknik Makina designation and stocked by Metav Werkzeuge, the component benefits from a European distribution channel that acts as a quality filter for workshop supplies. The combination of proven insert standards and a sturdy tool body supports stable cycle times and facilitates predictable maintenance intervals for process engineers. For reliable insert drilling and expert sourcing, contact Metav Werkzeuge for tailored advice and direct delivery from Emmerich Technical data Article number: U821TM Manufacturer: Teknik Makina Core dimensions Diameter: 21 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.377 kg Compatibility & features Compatible inserts: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 eClass: 21180201 FAQ Which inserts fit this drill body? The indexable drill accepts SPMG 0602 inserts; compatible manufacturers listed are Taegutec and YG-1, ensuring broad availability for replacement edges. What nominal hole diameter does the tool produce? The holder is specified for a 21 mm nominal cutting diameter and is designed to deliver consistent hole geometry at that size. How long is the cutting length and why does it matter? The 63 mm effective cutting length determines achievable depth and engagement; longer cutting lengths increase reach but require attention to rigidity to maintain hole tolerance. What are the key shank dimensions for spindle integration? Shank diameter is 25 mm with a shank/holder length of 56 mm, information that assists in selecting collets or shrink-fit holders for secure mounting. Is this tool suitable for series production environments? Yes, the tool body’s insert concept, proven insert compatibility and stable shank design make it well suited to repetitive production where rapid insert changes and predictable performance are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Drill Head 63mm Cutting Length, 56mm Shank Length, 25mm Shank Diameter - Teknik Makina
Take advantage of a compact, robust drill body that combines precise guidance with economical insert use; the 25 mm shank ensures high rigidity and the 63 mm cutting length enables deeper, consistent holes. Order the indexable insert drill directly via Metav Werkzeuge or consult the team for application advice. Indexable Insert Drill U152TM – 21 mm diameter, WCM-0402 insert system by Teknik Makina Indexable Insert Drill U152TM is a modular drill body designed for efficient holemaking with replaceable inserts in industrial production and workshop environments Compatible with Korloy WCM-0402 inserts 21 mm cutting diameter for standard through-holes 25 mm shank for high rigidity 142 mm overall length for compact assembly Greater productivity through stable tool geometry The U152TM offers a 21 mm nominal cutting diameter combined with a 25 mm shank, which increases torsional stability under load and reduces chatter during interrupted cuts. A 63 mm cutting length provides substantial effective drilling depth while maintaining axial stiffness; this balance results in fewer rejects and steadier cycle times. For operations requiring predictable hole quality, the solid mounting and compact overall length translate into measurable cycle-time improvements and repeatable results across batches. Lower running costs via replaceable inserts Designed for insert-based drilling, the tool accepts WCM-0402 indexable inserts from Korloy, enabling fast carbide insert changes without regrinding the body. This modular approach reduces tooling inventory turnover and minimises downtime: broken or worn inserts are replaced in minutes rather than hours. The economic benefit is delivered through reduced per-hole tooling cost and simpler maintenance routines, making the component well suited to both short runs and serial production where tool-change efficiency matters. Easy integration and predictable handling in production cells With an overall length of 142 mm and a shank engagement length of 56 mm, the drill body fits standard toolholders while keeping the centre of mass close to the spindle. The measured weight of 0.376 kg aids dynamic balance and handling during tool changes and transport. As a purpose-built insert drill body, it is appropriate for workstations that prioritise quick changeover, consistent hole geometry and clear documentation—benefits that support quality assurance processes and reproducible machining results. Contact Metav Werkzeuge for detailed application recommendations and availability of the Teknik Makina indexable insert drill U152TM with WCM-0402 compatibility Technical data Article number: U152TM Manufacturer: Teknik Makina Product name: Indexable insert drill (U152TM) Core dimensions Cutting diameter: 21 mm Overall length: 142 mm Cutting length: 63 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.376 kg Features & compatibility Compatible inserts: Korloy WCM-0402 Insert type: indexable inserts Application: insert-based drilling Suitable for workshop and industrial drill holders FAQ Which inserts fit this drill body? The drill body is compatible with Korloy WCM-0402 indexable inserts; replacement inserts may be sourced under that designation. What is the effective drilling depth? The tool provides a 63 mm cutting length, giving an effective drilling depth suitable for most through-hole and moderate-depth operations. What shank size is required for clamping? A 25 mm cylindrical shank is specified; a secure clamping length of 56 mm is advised for optimal stability. What is the nominal hole diameter produced? The nominal cutting diameter is 21 mm as specified in the core dimensions. What is the article number for ordering and documentation? The SKU for ordering and spare-part reference is U152TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
21mm Solid Head Drilling Unit 42mm Cutting Length, 56mm Shank Length - Teknik Makina
Robust indexable drilling in a compact body: the combination of a 21 mm cutting diameter, a 25 mm shank and a 42 mm cutting length gives reliable hole quality and stable clamping for series production; order the Teknik Makina indexable drill directly via Metav Werkzeuge or contact our consultants for application support. Teknik Makina U921TM indexable drill – 21 mm diameter · 25 mm shank The indexable drill U921TM is an insert-equipped drill body for medium-depth holemaking, designed to accept SPMG 0602 inserts and to integrate into standard toolholding systems for production and job-shop use 21 mm cutting diameter for medium holes 25 mm shank for rigid clamping Compatible with SPMG 0602 inserts 42 mm effective cutting length Suitable for Taegutec and YG-1 inserts Repeatable hole quality with stable clamping The U921TM drill body delivers consistent hole geometry through its substantial 25 mm shank and precise body design. The combination of a 21 mm cutting diameter and a 56 mm shank length reduces deflection under load, which helps to maintain concentricity and surface finish in serial drilling operations. For production planners this means fewer reworks and more predictable downstream processing; the technical design supports stable machine setups and efficient cycle times. Minimised downtime thanks to indexable inserts Equipped to accept SPMG 0602 inserts, the drilling system enables rapid insert changes and economical reconditioning of cutting edges. The use of standardised insert dimensions allows compatibility with established suppliers such as Taegutec and YG-1, simplifying stockkeeping and spare-part sourcing. By replacing worn inserts rather than entire tools, the drilling solution reduces tooling costs and shortens maintenance intervals, increasing overall equipment effectiveness in busy workshops. Easy integration into existing tooling kits With an overall length of 121 mm, a 42 mm cutting length and a compact mass of 0.338 kg, the tool body is designed for straightforward integration into common holders and adaptors. The clear dimensional data supports rapid verification against machine capacity and fixture geometry during process planning. The compact weight and standardised shank facilitate handling and secure clamping, making the system suitable for both single-machine cells and multi-spindle arrangements where predictable tool behaviour is required. Contact Metav Werkzeuge for tailored application advice and supply of the Teknik Makina U921TM indexable drill; our Emmerich technical team will assist with insert selection and delivery coordination Technical data SKU: U921TM Manufacturer: Teknik Makina Eclass: 21180201 Compatible inserts: SPMG 0602 Core data Diameter: 21 mm Overall length: 121 mm Cutting length: 42 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.338 kg Special features Compatible manufacturers: Taegutec, YG-1 Insert type: SPMG 0602 Indexable drill body design FAQ Which insert size does this drill accept? The drill accepts SPMG 0602 inserts; compatibility with Taegutec and YG-1 insert ranges is specified for the U921TM. What are the key dimensions that affect clamping and setup? Key dimensions are 21 mm cutting diameter, 25 mm shank diameter, 121 mm overall length and 42 mm cutting length. Is this tool suitable for quick insert replacement? Yes, the indexable drill body is designed for fast insert changes to minimise downtime and tooling costs. Which manufacturers’ inserts can be used as replacements? Insert replacements from Taegutec and YG-1 are compatible with this drill body. What advantages does an indexable drill body offer compared with solid drills? An indexable drill body allows economical replacement of cutting edges, shorter maintenance times and better inventory management through standardised inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22.5mm Solid Drill 66mm Cutting Length, 56mm Shank Length - Teknik Makina
Take advantage of a robust indexable drill body designed for dependable holemaking: compatibility with Taegutec SOMT 08T3 inserts and a 22.5 mm nominal diameter deliver reproducible results and reduced setup time; order the Vollbohrer directly via Metav Werkzeuge or ask our consultants if needed. Teknik Makina indexable-insert drill body (Vollbohrer) U319TM – 22.5 mm diameter, 66 mm cutting length The indexable-insert drill body Vollbohrer (U319TM) by Teknik Makina is engineered for stable, repeatable drilling in production environments where insert interchangeability and process reliability matter Compatible with Taegutec SOMT 08T3 inserts 22.5 mm nominal diameter for precision holes 66 mm cutting length for deep drilling 25 mm round shank, secure clamping Consistent hole quality for series production The indexable-insert design ensures consistent hole geometry across long runs by allowing quick replacement of worn cutting tips. With a 22.5 mm nominal diameter and a 66 mm cutting length, the tool provides the controlled engagement needed for accurate depths without frequent regrinding. This stability translates into fewer rejects and a smoother workflow for repetitive drilling tasks in CNC cells. Faster maintenance and lower lifecycle costs Because the cutting edges are supplied as replaceable inserts, tool maintenance is simplified and downtime is reduced. The compatibility with Taegutec SOMT 08T3 inserts means standardised spare parts and rapid replacement. The modular concept reduces per-hole operating cost and supports predictable maintenance intervals, which benefits throughput and planning in production and maintenance schedules. Secure clamping for minimal runout and vibration A 25 mm round shank and a substantial overall length of 144 mm deliver the rigidity required to reduce runout and vibration in drilled holes. The robust shank profile is selected to provide reliable clamping in conventional chucks or suitable adaptors, improving surface finish and extending insert life by stabilising the cutting conditions during each pass. Clear compatibility and application scope The tool is supplied as an indexable-insert drill body suited to conventional drilling machines and CNC spindles where insert changeability is preferred to regrinding. With the model designated U319TM, the combination of insert compatibility, measurable cutting length and standard shank size enables integration into existing tool sets without complex requalification, making it a pragmatic choice for workshops and production lines. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools indexable-insert drill body U319TM into production; order from our Emmerich stock or request application guidance by email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: U319TM Manufacturer: Teknik Makina Facts Diameter: 22.5 mm Overall length: 144 mm Cutting length: 66 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.375 kg Special features Compatible inserts: Taegutec Insert type: SOMT 08T3 Product type: Vollbohrer (indexable-insert drill body) SKU: U319TM FAQ Which inserts fit this drill body? The drill body accepts Taegutec SOMT 08T3 indexable inserts; the U319TM is designed for that insert format to ensure correct seating and cutting geometry. How deep can holes be drilled with this tool? Effective cutting depth is determined by the 66 mm cutting length; the overall length of 144 mm gives additional clearance for clamping and tool overhang. What clamping size is required for the shank? The tool has a 25 mm round shank and requires a corresponding chuck or adaptor that securely holds a 25 mm diameter shank. Is this design suitable for production runs? Yes; the indexable design and standard insert format are intended for series production where fast insert changes and predictable performance are priorities. Are the cutting edges replaced or re-sharpened? Cutting edges are supplied as indexable inserts (SOMT 08T3) and are replaced rather than re-sharpened, simplifying maintenance and reducing downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22.5mm Solid Drill 66mm Cutting Length, 56mm Shank Length, 145mm Overall Length - Teknik Makina
Reliable holemaking with modular insert replacement and stable clamping. The 22.5 mm cutting body, 66 mm cutting length and 25 mm shank combine for consistent machining results — order the tool via Metav Werkzeuge or contact our consultants for technical advice. U155TM — Teknik Makina indexable drill body, 22.5 mm, 25 mm shank The U155TM is an indexable drill body engineered for efficient holemaking on CNC machines where quick insert changes and steady clamping matter 22.5 mm drill diameter for medium holes 25 mm shank for robust clamping Compatible with Korloy WCM-0402 inserts 66 mm cutting length for deeper holes Balanced body for vibration reduction Stable clamping for consistent hole quality The indexable drill body delivers stable clamping thanks to its 25 mm shank and compact overall length of 145 mm, reducing runout and improving repeatability across batches. A stiffer connection between spindle and tool minimises vibration, which directly supports more homogeneous hole geometry and longer tool life. This mechanical stability translates into fewer rejects and less rework, supporting production targets and cost-efficiency without relying on assumed material compatibility. Quick insert changes to reduce downtime Designed to accept WCM-0402 inserts from Korloy, the drilling system enables rapid insert replacement and minimises setup time. The insert seat geometry and accessible screw position allow technicians to change cutting edges without complex realignment, so maintenance becomes a short, predictable process. The modular approach separates cutting-edge wear from the drill body, which lowers lifecycle costs and simplifies spare-part management in a workshop environment. Dimensions and geometry optimised for machining stability Key dimensions such as 66 mm cutting length and 22.5 mm diameter are balanced to provide adequate chip evacuation while maintaining rigidity in the cutting zone. The 56 mm shank length supports correct clamping depth in common toolholders, and the moderate overall length reduces cantilever effects. These measurable properties assist in selecting appropriate feeds and speeds and contribute directly to process reliability on vertical and horizontal machining centres. Practical application guidance and safe handling The tool is supplied as a prepared drilling body that accepts indexable inserts; correct torque on the insert screw and periodic inspection of the insert seat ensure repeatable results. While the body itself is robust, service routines that include cleaning chip pockets and checking seat faces will extend life and preserve hole quality. For specification matching and holder selection, consult Metav Werkzeuge for guidance tailored to individual machine and process constraints. For personalised technical advice or to arrange supply of the Teknik Cutting Tools U155TM from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholder compatibility and delivery options Technical data Article number: U155TM Product: Indexable drill body Manufacturer: Teknik Makina Core data Diameter: 22.5 mm Overall length: 145 mm Cutting length: 66 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.394 kg Special features Insert type: WCM-0402 Compatible inserts: Korloy SKU: U155TM FAQ What insert type does this drill accept? The indexable drill body accepts WCM-0402 inserts; compatibility is confirmed with Korloy WCM-0402 specifications for the U155TM. What are the key dimensions to check for holder selection? Check the 25 mm shank diameter, 56 mm shank length and the 145 mm overall length when matching the U155TM to a toolholder or adaptor. How deep can this drill cut effectively? The tool has a 66 mm cutting length, which indicates the maximum effective engaged length for holemaking without compromising stability for the U155TM drilling system. Is the drill suitable for high-speed machining? The design of the U155TM supports stable clamping and insert changes; consult Metav Werkzeuge to confirm cutting parameters for specific high-speed applications and machine capability. What maintenance is recommended for long service life? Periodic cleaning of chip pockets, inspection of insert seats and correct screw torque during insert changes are recommended to maintain performance of the U155TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22.5mm Solid Drill Head 66mm Cutting Length, 145mm Overall Length - Teknik Makina
There is inconsistent product information for this item: the designation provided indicates a solid drill, while the technical entries list compatibility with indexable inserts (example: SPMG 07T3) and name insert manufacturers Taegutec and YG-1. These two data sets imply different product concepts and cannot both be correct without further clarification. Available measurable data included with the entry are: diameter 22.5 mm, cutting length 66 mm, shank diameter 25 mm, shank length 56 mm, overall length 145 mm and weight 0.375 kg. If the tool is a genuine solid drill, details about compatible indexable inserts and insert manufacturers appear erroneous; if it is an indexable (insert) drill, the designation as a solid drill is incorrect. Please verify the correct product type and associated specifications before proceeding with publication or procurement. For assistance in resolving this discrepancy, technical clarification can be obtained from the supplier or from Metav Werkzeuge at info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
225mm 33mm Solid Drill with 132mm Cutting Length, 32mm Shank - Teknik Makina
Take advantage of the combination of robust Ø33 mm diameter, a long 132 mm cutting length and secure 32 mm shank to maintain stable, high‑productivity drilling cycles. Order the indexable drill directly via Metav Werkzeuge or ask the Metav consultants for application guidance. Indexable drill U733TM by Teknik Makina — Ø33 mm, 132 mm cutting length The Indexable drill U733TM is a purpose‑built insert drill for efficient holemaking in metalworking and CNC machining, designed for secure clamping and fast insert changes. Ø33 mm diameter for precision holes 132 mm cutting length for deep cuts 32 mm shank for rigid toolholding Compatible with SPMG 0904 inserts (Taegutec, YG‑1) Stable deep‑hole performance with long cutting reach With a cutting length of 132 mm, this insert drill is designed for deeper holemaking without compromising stability. The extended cutting flute reduces the need for multiple operations, enabling a single‑pass approach for many medium‑depth bores. The result is shorter cycle times and fewer tool changes, which supports higher metal removal rates and more predictable production scheduling for machining centres and toolrooms. Fast insert management and consistent results Compatibility with SPMG 0904 indexable inserts from leading suppliers such as Taegutec and YG‑1 simplifies logistics and reduces downtime. Standardised insert clamping ensures that edge geometry and chipbreaking behaviour remain consistent across batches, supporting repeatable hole quality. For operations that value predictable tool life and rapid exchange, this feature delivers clear operational advantages. Rigidity and secure clamping for improved accuracy The tool’s 32 mm shank and overall length of 225 mm provide a balance between reach and stiffness. A rigid toolholder interface reduces vibration and runout, which helps maintain hole tolerances and surface finish. The design minimises off‑centre deflection during entry and exit, so holes are closer to nominal diameter and require less rework, improving first‑pass yield. Designed for workshop integration and productivity gains Weighing 1.05 kg and engineered for reliable mounting, the drill is suitable for CNC lathes and milling machines that accept a 32 mm shank interface. Its compatibility with widely available inserts supports flexible stocking strategies and cost‑effective tooling management. The tool’s characteristics support lean production by reducing setup complexity and enabling faster throughput without sacrificing hole quality. For robust, production‑oriented drilling with Teknik Makina tools, contact Metav Werkzeuge in Emmerich for tailored advice, reliable supply and order handling — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U733TM Manufacturer: Teknik Makina Core measurements Diameter: 33 mm Cutting length: 132 mm Overall length: 225 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.05 kg Features Compatible with SPMG 0904 inserts Compatible insert suppliers: Taegutec, YG‑1 Insert type: indexable for rapid replacement Purpose: metalworking / CNC holemaking FAQ Which insert type is required for this drill? The indexable drill U733TM uses SPMG 0904 inserts; compatible inserts from Taegutec and YG‑1 are suitable. What machine interfaces suit the tool? The tool is intended for machines accepting a 32 mm shank, offering rigid clamping for CNC machining centres and driven toolholders. Is the drill suitable for deep hole machining? Yes, the 132 mm cutting length supports medium to deep holemaking in a single pass for many applications. How does the tool support production efficiency? Standardised inserts and a robust shank reduce changeover time and vibration, improving first‑pass quality and throughput with the U733TM. Can the U733TM be used with third‑party inserts? SPMG 0904 is an industry standard; inserts from approved suppliers such as Taegutec and YG‑1 are compatible and recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm Boring Bar Solid Carbide 110mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of the combination of robust indexable insert technology, precise dimensional control and easy insert availability for uninterrupted production. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Vollbohrer U782TM — Indexable insert drill, 22 mm diameter, 25 mm shank (Teknik Makina) The Vollbohrer U782TM is an indexable insert drill engineered for accurate holemaking in CNC machining, offering straightforward insert replacement and consistent performance for production and repair work 22 mm cutting diameter, 110 mm cutting length 25 mm shank for stable clamping Compatible with Korloy WCm-0402 inserts Total length 190 mm for extended reach Stable geometry for repeatable hole quality The U782TM combines a true-to-size 22 mm diameter with a substantial 110 mm cutting length to enable consistent hole depths without frequent re‑positioning. A 25 mm shank provides a secure interface with common toolholders, reducing runout and vibration. Using indexable inserts cuts changeover time and maintenance effort: worn edges are replaced quickly instead of regrinding, which maintains tight tolerances and improves repeatability across series production. Designed for efficient spindle time and tool handling A 56 mm shank engagement length supports reliable clamping and reduces the risk of micro‑movement under cutting forces, while the 190 mm overall length allows access to deeper features without auxiliary extensions. The insert pocket accepts WCm-0402 inserts, a widely stocked standard from Korloy, helping to keep tool supply costs predictable and downtime to a minimum. The tool’s geometry favours quick index cycles and predictable chip control, translating into measurable productivity gains on the shop floor. Practical integration into workshop processes This insert drill is targeted at CNC workshops and job shops requiring dependable holemaking with fast serviceability. The modular insert system simplifies inventory: a single spare pack of WCm-0402 inserts serves multiple tools, lowering stocking complexity. Where operators need guidance on clamping or insert selection, the drill’s dimensions and insert type allow clear specification for holders and inserts, making set‑up and changeover straightforward and audit‑friendly. Contact Metav Werkzeuge for tailored tooling advice on the Teknik Makina indexable insert drill U782TM and to arrange specification checks or delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: U782TM Manufacturer: Teknik Makina Designation: Vollbohrer Compatible inserts manufacturer: Korloy Compatible inserts: WCm-0402 Facts Diameter: 22 mm Cutting length: 110 mm Shank diameter: 25 mm Shank engagement length: 56 mm Total length: 190 mm Weight: 0.47 kg Special features Indexable insert drill Insert system: WCm-0402 Korloy-compatible inserts FAQ Which insert type does this drill use? The drill is set up for WCm-0402 indexable inserts; Korloy inserts with that designation fit the seat. What are the principal dimensions to check for toolholder compatibility? Key dimensions are 22 mm diameter, 25 mm shank and 56 mm engagement length; confirm the holder accepts a 25 mm shank. Can this drill reach deep bores? With a total length of 190 mm and a cutting length of 110 mm, the tool is suitable for deeper holemaking within its specified cutting length. How does the insert system affect maintenance? Indexable inserts reduce downtime: worn inserts are simply replaced, avoiding regrinding and preserving consistent hole tolerances. Is the drill appropriate for CNC production runs? Yes — the combination of a secure 25 mm shank interface, standard WCm-0402 inserts and predictable geometry supports efficient series production and rapid changeovers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm Solid Carbide Boring Head 88mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of a compact, robust drill body that combines precise clamping with easy insert replacement; the compatibility with Taegutec SOMT 0703 inserts reduces tooling costs and downtime while the Ø 22 mm diameter and 25 mm shank ensure stable results in series production — order via Metav Werkzeuge or ask for tailored advice. Indexable Insert Drill U418TM — Drill body, Ø 22 mm, 25 mm shank (Teknik Makina) The Indexable Insert Drill U418TM is a drill body engineered for insert-based drilling operations in machining centres and drilling heads, combining a short, rigid design with standard insert compatibility. Compact design with 25 mm shank Compatible with Taegutec SOMT 0703 inserts 88 mm effective cutting length Rigid body for reduced vibration Stable clamping delivers consistent hole quality The drill body is built around a 25 mm shank and a Ø 22 mm cutting diameter to provide a secure, machine-friendly connection that reduces run-out and vibration. This rigidity translates into consistent hole quality across production runs and fewer rejects; the standardised shank diameter also simplifies toolholder selection and repeatable set-up routines, supporting predictable cycle times and reduced rework. Reduced tooling expense through insert standardisation Designed for indexable cutters, the tool accepts Taegutec SOMT 0703 inserts which are widely available and simple to replace. Using standard insert geometry means lower tooling costs and minimal downtime for service intervals: worn cutters are replaced rather than the entire tool, and the modular layout supports quick maintenance procedures on the shop floor, improving overall equipment effectiveness. Balanced proportions for reliable performance in production With an 88 mm cutting length, 166 mm overall length and a mass of 0.425 kg, the drill body offers a balance between reach and rigidity that suits repetitive machining tasks. The measured geometry helps to maintain tool life and workpiece quality, while the modest weight contributes to smoother acceleration and deceleration on CNC spindles. For workshops seeking dependable repeatability, this configuration supports stable drilling cycles and efficient integration into tool inventories. Contact Metav Werkzeuge for a technical consultation on the Teknik Makina Indexable Insert Drill U418TM (SKU U418TM) and to request a tailored supply recommendation from Emmerich. Technical Data Article number: U418TM Manufacturer: Teknik Makina Product name: Indexable insert drill (Vollbohrer) Facts Diameter: 22 mm Overall length: 166 mm Cutting length: 88 mm Shank length: 56 mm Shank diameter: 25 mm Weight: 0.425 kg Special features Compatible insert: SOMT 0703 Compatible insert manufacturer: Taegutec Designed for replaceable cutting inserts and easy reconditioning FAQ Which inserts fit this drill body? The drill body accepts Taegutec SOMT 0703 inserts; Teknik Makina’s U418TM is configured for this standard insert size to ensure broad availability and simplified stocking. What are the critical dimensions for toolholding? Key dimensions are a 25 mm shank, Ø 22 mm cutting diameter, 88 mm cutting length and 166 mm overall length, which should be checked against the machine’s toolholder and available clearance before use. How does the tool help reduce downtime? By using replaceable SOMT 0703 inserts, wear is managed at the insert level rather than replacing the whole tool body, so the U418TM enables fast cutter changes and lower per-hole tooling costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Schnellere Fertigung durch präzise Vollbohrer für industrielle Bearbeitungen
Vollbohrer, auch bekannt als Massivbohrer oder Durchgangsbohrer, sind speziell entwickelte Zerspanungswerkzeuge zum direkten Einbringen von Bohrungen in massives Werkstückmaterial. Sie werden bevorzugt auf Drehmaschinen und Bearbeitungszentren eingesetzt, um in einem einzigen Arbeitsgang große Materialvolumina wirtschaftlich abzutragen.
Effiziente Funktion und technischer Kontext für robuste Anwendungen
In der Praxis ermöglichen Vollbohrer das Bohren ohne vorheriges Zentrieren oder Vorbohren, wodurch Rüstzeiten reduziert werden. Bei Varianten ohne Innenkühlung wird der Kühlschmierstoff über externe Maschinendüsen zugeführt; diese Auslegung ist jedoch nur bei extrem kurzen Bohrtiefen und sehr leicht zerspanbaren Materialien geeignet, da produzierte Späne den Bohrkanal schnell verschließen können. Industrieller Standard sind Vollbohrer mit Innenkühlung: durch den Werkzeugkörper verlaufende Kanäle transportieren das Kühlmittel unter hohem Druck direkt an die Schneiden der Bohrerspitze. Dadurch werden Reibungswärme abgeführt und Spänemengen zuverlässig aus dem Bohrloch gespült, was ein Festklemmen, Riefenbildung und plötzliche Werkzeugbrüche effektiv verhindert.
Optimierte Produktion: Konkrete Vorteile für die Fertigung
- Reduzierte Rüstzeit durch Bohren in einem Arbeitsgang mit Vollbohrer oder Einstufenbohrer.
- Verbesserte Spanabfuhr dank innenliegender Kühlmittelkanäle, die die Standzeit verlängern.
- Minimiertes Bruchrisiko durch gezielte Kühlung und Druckspülung an der Bohrerspitze.
- Höhere Prozesssicherheit bei der Bearbeitung großer Materialvolumina auf Bearbeitungszentren.
- Anpassbar an Maschinentyp: Vollbohrer und Durchgangsbohrer sind für Drehmaschinen und Fräszentren verfügbar.
Metav als starker Partner für Beschaffung und Beratung
Metav fungiert als Qualitätsfilter und bietet mit Sitz in Emmerich ein lückenloses Sortiment für präzise Werkzeuge. Mit über 48.000 Kunden und mehr als 250.000 Produkten reduziert Metav die Lieferantenanzahl und liefert verlässlich an die Werkbank. Das Sortiment umfasst sorgfältig ausgewählte Vollbohrer, Massivbohrer und Durchgangsbohrer sowie Beratung zur richtigen Auslegung von Innenkühlung und Schneidengeometrie.
Kurz und prägnant: Wann Vollbohrer die beste Wahl sind
Für Anwendungen, in denen Bohren in einem Durchgang, sichere Spanabfuhr und maximale Prozesssicherheit gefordert sind, sind Vollbohrer die bevorzugte Lösung. Vollbohrer sowie die Varianten Massivbohrer und Durchgangsbohrer sorgen für effiziente, zuverlässige Bohrprozesse in der Serien- und Einzelfertigung.
FAQ
Was ist der Unterschied zwischen Vollbohrer mit Innenkühlung und ohne Innenkühlung?
Vollbohrer mit Innenkühlung führen das Kühlmittel durch Kanäle im Werkzeugkörper direkt an die Schneide und ermöglichen so effektive Wärmeabfuhr und Spantransport; Varianten ohne Innenkühlung werden von außen über Maschinendüsen gekühlt und eignen sich nur für sehr kurze Bohrtiefen und weiche Materialien.
Warum reduziert die Innenkühlung das Risiko von Werkzeugbruch bei Vollbohrern?
Die Innenkühlung führt das Kühlmittel unter hohem Druck an die Bohrerspitze, wodurch Reibungswärme reduziert und Späne aus dem Bohrloch gespült werden; dadurch werden Festklemmen und riefenbildung vermieden, was Werkzeugbrüche verhindert.
Auf welchen Maschinentypen werden Vollbohrer typischerweise eingesetzt?
Vollbohrer und ihre Synonyme Massivbohrer sowie Durchgangsbohrer werden hauptsächlich auf Drehmaschinen und Bearbeitungszentren eingesetzt, dort ermöglichen sie das wirtschaftliche Abtragen großer Materialmengen in einem Arbeitsgang.
Wie unterstützt Metav bei der Auswahl des passenden Vollbohrers?
Metav bietet ein umfangreiches Sortiment und fachkundige Beratung aus Emmerich; Kunden profitieren von Produktauswahl, technischen Informationen zur Innenkühlung und Empfehlungen für die passende Schneidengeometrie.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com