Enhanced inspection with loupe viewing
Loupes provide quick, magnified visual assessment for metalworking and quality assurance, helping operators detect surface defects and measure fine features with minimal setup; they serve applications from metallography to workshop inspection by offering handheld, folding and stand-mounted options that suit different tasks and working distances. The tools are designed to deliver a clear virtual, upright image via a converging lens, where magnification depends on focal length, and they support both rapid checks and more precise measurements when equipped with a scale. Using a loupe improves throughput by enabling early detection of faults, protecting downstream processes and reducing rework through faster decision-making based on visual inspection, surface analysis and dimensional checking.
300 mm x 200 mm Stand For Illuminated Magnifier, >2 kg Load Capacity - Metav IndustryLine
Take advantage of a stable, heavy-duty base and a generous 300 x 200 mm platform to secure inspection lamps and magnifiers during precision work; the substantial mass minimises vibration and improves visual stability. Order or consult Metav Werkzeuge for tailored advice on integration and accessories. Table stand for magnifying lamp 300 x 200 mm — sturdy workshop base (4.3 kg, Metav IndustryLine) The Table stand for magnifying lamp 300 x 200 mm provides a heavy, vibration-resistant support for inspection and assembly tasks in optics and workshop environments. Heavy steel base, 4.3 kg mass for stability Platform size 300 x 200 mm for larger lamps Designed for workshop and inspection use Compatible with common magnifying lamps Reduced vibration for steadier inspection results A substantial base mass improves the stability of any mounted illumination or magnifier, turning hand-held wobble into steady viewing. The 4.3 kg base dampens micro-movements that would otherwise blur fine detail, which is particularly relevant for tasks that rely on visual precision. This results in fewer retakes and more reliable visual inspections in production or quality-control routines, delivering a measurable boost in process consistency. Large platform to accommodate diverse lamp heads The 300 x 200 mm platform offers room for larger lamp interfaces and provides a stable footprint for diverse magnifier designs. The expanded surface area simplifies alignment and positioning of the lamp head, helping to maintain a consistent working distance and illumination angle. For operators, this means quicker setup times and improved repeatability when switching between components or inspection points. Workshop-ready construction and straightforward integration Built for continuous use in inspection and assembly areas, this table stand comes from the Metav IndustryLine range and is engineered with workshop durability in mind. The robust construction supports frequent handling and repositioning without compromising stability. Compatibility with standard magnifying lamps ensures easy integration into existing workstations, while the product’s optical focus makes it a reliable partner for precision assembly and inspection tasks. Choose the Metav IndustryLine table stand when rigidity and repeatable inspection conditions are required; contact Metav Werkzeuge for product guidance at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: M503.165.1 GTIN: 4054469164588 ECLASS: 27110390 Core data Weight: 4.3 kg Platform size: 300 x 200 mm Packaging dimensions: 275 x 185 Special features Category: Optik Label: Table stand for magnifying lamp, > 2 kg Designed for workshop and inspection use Compatible with common magnifying lamps and inspection setups Suitable for integration with related accessories (see product family) FAQ What load does the stand support? The table stand’s specification indicates suitability for loads above 2 kg and the item weight of 4.3 kg gives a stable base for typical inspection lamps. Is the stand suitable for larger magnifier heads? Yes. The 300 x 200 mm platform offers sufficient surface area to support larger lamp heads and facilitates precise positioning. Can the stand be used in a production environment? The robust construction and workshop-oriented design make this stand appropriate for repeated use in production and quality-inspection settings. Does the stand come with mounting hardware? The product is supplied as a ready stand; specific mounting hardware depends on the lamp model and should be checked against the lamp manufacturer’s specifications. Which product family does this belong to? This stand is part of the Metav IndustryLine offerings and is designed to integrate with common inspection and magnifying lamp systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm+300mm LED Task Lamp, 90 SMD LEDs 1000Lm, Dimmable, Table Clamp, 6000–7000K, 220–240V - Metav IndustryLine
Take advantage of the combination of energy-efficient 14.5 W LED output, dimmable control and 300+300 mm articulated reach for precise, adaptable task lighting; order the unit directly via Metav Werkzeuge or consult the advisors for application support. M503.168 LED Work Light — Clamp-mounted, dimmable (Metav IndustryLine) The M503.168 is a clamp-mounted LED work light designed for inspection benches and assembly stations, offering flexible positioning and consistent cool-white illumination for detail-critical tasks. 1000 lm luminous output 90 SMD LEDs for even illumination Dimmable control for task adjustment 300+300 mm articulated arms Clear, task-focused illumination that improves inspection results The light unit delivers 1000 lm from 90 SMD LEDs at a rated 14.5 W, producing a crisp 6000–7000 K cool-white beam that supports high-contrast inspection and fine assembly. The dimmable function permits precise adjustment of light intensity to match material surfaces and magnification levels, reducing glare and helping to reveal defects without overheating the workpiece. By converting electrical input into uniform output efficiently, the lamp combines high luminous efficacy with low running power, making it suitable for continuous use on inspection benches and optical workstations. Flexible mounting and stability for repeatable positioning A table clamp base and a pair of 300 mm articulated arms (300+300) create a compact but highly adjustable support that holds position reliably during repetitive tasks. The articulated geometry and the overall reach of 400 mm allow the lamp head to be placed close to the work area or moved away for general illumination, while the solid mounting prevents unintended drift. The relatively robust mass contributes to positional stability, supporting reproducible lighting conditions that benefit quality control and measurement routines where consistent illumination is essential. Built for workshop environments with long service life Designed for practical workshop use, the luminaire offers an estimated service life of approximately 20,000 hours, utilising modern SMD LED technology that resists lumen depreciation under normal operating conditions. Rated for standard mains supply 220–240 V / 50 Hz, the unit integrates reliably into European electrical environments and keeps maintenance requirements low. The combination of extended life and low power consumption supports continuous operation in busy industrial settings while limiting downtime for lamp replacement. Integration advantages and ergonomic benefits at the bench The clamp-mounted format is optimised for benches, inspection tables and assembly islands where floor space is limited and rapid positional changes are required. The lamp’s dimmable control supports a range of tasks from coarse assembly to delicate visual inspection, and the even output from the 90 SMD LEDs reduces shadowing across small components. As part of a workstation setup, the device improves both visual comfort and task efficiency, contributing to faster decision-making in quality checks and reducing the likelihood of rework due to unseen defects. The unit is presented as a practical, energy-conscious choice for workshops seeking a balance of performance and operational economy. For application-specific advice or a tailored quotation for the Metav IndustryLine M503.168 LED work light, contact Metav Werkzeuge by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com — specialists are available to assist with integration and compatibility queries Technical Data Article number: M503.168 GTIN: 4054469164618 Manufacturer: Metav IndustryLine Category: Optik Facts Luminous flux: 1000 lm Power: 14.5 W LEDs: 90 SMD LEDs Light temperature: 6000–7000 K Arms: 300 mm + 300 mm Total length: 400 mm Weight: 6.6 kg Service life: approx. 20,000 h Supply voltage: 220–240 V / 50 Hz eClass: 27110640 Customs tariff number: 94054099900 Special features Dimmable light output Table clamp base Even illumination for inspection tasks Energy-efficient SMD LED technology Designed for optical and assembly benches FAQ What light output can be expected from the lamp? The M503.168 provides 1000 lm from its 90 SMD LEDs, delivering high-intensity illumination suitable for inspection and assembly tasks. Is the lamp intensity adjustable for different tasks? Yes, the unit features a dimmable control that allows incremental adjustment of brightness to suit both fine inspection and general lighting requirements. How is the lamp mounted and positioned? The work light is supplied with a table clamp and two articulated arms (300+300 mm) that permit secure clamping to benches and flexible positioning over the work area. What is the expected service life of the LEDs? The SMD LED package is rated at approximately 20,000 hours, providing long-term operation with reduced maintenance intervals. Is the product suitable for continuous use in a workshop environment? Yes; the lamp operates on 220–240 V / 50 Hz mains and is engineered for continuous workshop use, combining low power consumption with durable LED technology. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Measuring Field Peak Magnifier with Standard Template, 10x, 0.1mm Scale - Peak
Peak Measuring Loupe — Precision Measuring Loupe The Peak Measuring Loupe is a compact measuring loupe for accurate inspection and dimensional checks in workshops, quality control and hobby applications. 10x Magnification for precise inspection Achromatic Lenses minimise optical aberrations Large 35 mm Field of View for easy reading Measuring Range 0–30 mm with 0.1 mm scale Lightweight 74 g with protective case included Exceptional optical accuracy for reliable measurements The Peak Measuring Loupe combines Achromatic Lenses with a finely engraved 0.1 mm scale to deliver measurement results you can trust. Achromatic optics correct colour fringing and reduce distortion, so edges and graduations appear sharp across the whole 35 mm Field of View. This leads to faster readings and fewer rechecks, which is especially valuable in inspection routines where consistency matters. The integrated Standard Template supports quick comparisons and repeatable measurements. Compact design that suits workshop and field use Designed for mobility, the instrument fits comfortably in a pocket or tool kit while weighing just 74 g. Its Ø46 x 44 mm housing gives a stable grip and a wide viewing area, allowing users to position the loupe quickly over parts or print. The included Protective Case keeps optics safe during transport and storage, extending service life and preserving calibration. These features make the loupe a practical choice for on-site inspections as well as bench-top tasks. Clear benefit for specialists and hobbyists Whether used by jewelers, watchmakers, engineers or quality inspectors, this measuring loupe brings microscopic detail into practical reach. The 10x Magnification reveals fine contours and marking clarity while the precise measuring system removes guesswork from small-dimension checks. For non-experts, the loupe shortens the learning curve: visible graduations and a large field reduce user error and speed up familiarisation. How the measuring system supports accurate decision-making The marking system with a Measuring Range 0–30 mm allows direct reading of dimensions with 0.1 mm resolution; measurements are taken by aligning the object with the engraved scale and reading across the Field of View. For customers unfamiliar with optical terms, Achromatic Lenses mean less colour dispersion and improved edge contrast, translating into measurements that are easier to interpret. The solid construction and defined scale provide reproducible results under routine inspection conditions. Choose the Peak Measuring Loupe for dependable precision — contact METAV Werkzeuge for expert advice at info@metav-werkzeuge.com, call +49 2822 7131930 or reach out via WhatsApp +49 170 2837271 Technical information Bezeichnung: Peak Messlupe Brand: Peak SKU: MS905.180 Label: Peak Messlupe 10x Magnification: 10x Lens: Achromatic Field of View: Ø35 mm Scale Division: 0,1 mm Measuring Range: 0–30 mm Dimensions: Ø46 x 44 mm Mass: 74 g Includes Standard Template: Yes Protective Case included: Yes UID: MS905.180 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What measuring capability does the Peak Measuring Loupe (Peak, measuring loupe) offer? The Peak Measuring Loupe from Peak is equipped with 10x Magnification and a measuring range of 0–30 mm with a 0.1 mm scale, enabling fine dimensional checks and clear visual inspection for small parts. Is the Peak Measuring Loupe (Peak, measuring loupe) suitable for field inspections? Yes, the Peak Measuring Loupe is lightweight (74 g) and supplied with a Protective Case, making it suitable for on-site use in workshops, maintenance rounds or mobile quality control. How do Achromatic Lenses improve results with the Peak Measuring Loupe (Peak, measuring loupe)? Achromatic Lenses in the Peak Measuring Loupe reduce colour fringing and optical aberrations, which enhances edge contrast and makes scale readings more reliable and quicker to interpret. Can non-specialists use the Peak Measuring Loupe (Peak, measuring loupe) effectively? Absolutely. The clear 35 mm Field of View, defined 0.1 mm graduations and included Standard Template help users with limited experience achieve reproducible measurements after short familiarisation. Who can advise if I need further technical details about the Peak Measuring Loupe (Peak, measuring loupe)? METAV Werkzeuge provides competent consultation for technical questions or complex requirements — email info@metav-werkzeuge.com, telephone +49 2822 7131930, or WhatsApp +49 170 2837271
33mm Magnifier 10X Viewing Field 43x29mm Plastic Housing - Metav IndustryLine
Benefit from precise 10× magnification, a 33 mm viewing field and a hardened lens for consistent detail checks; order the M503.126 inspection loupe directly via Metav Werkzeuge or consult our advisors for application advice. M503.126 Inspection Loupe — 10× magnification, 33 mm viewing field (Metav IndustryLine) M503.126 inspection loupe is a compact handheld optical aid designed for close visual inspection in workshops, quality control and precision craft applications. 10× magnification for fine inspection 33 mm viewing field for clear context Lightweight 0.1 kg housing for portability Hardened lens for improved scratch resistance Inspect small details with industrial clarity The loupe delivers 10× magnification, enabling clear visualisation of fine edges, solder joints and surface defects that standard magnifiers can miss. The combination of a treated, hardened lens and a generous 33 mm viewing field means a larger area can be scanned without frequent repositioning, which speeds up repetitive checks on components. For electronics inspection, jewellery appraisal or fine mechanical work, the optical setup reduces the need for additional lighting by increasing apparent contrast, improving defect detection rates and supporting faster decision-making on the shop floor. Portable design that supports fast, repeatable checks With its lightweight plastic housing and compact footprint (29 × Ø43 mm), the loupe is easy to carry to benches or into production cells. The modest 0.1 kg mass minimises hand fatigue during extended use, while the rigid housing keeps the optics aligned for repeatable observations. This stability assists in maintaining consistent inspection results across multiple operators and shifts, contributing to efficient quality control routines and fewer ambiguous measurements during visual appraisal. Built for practical workshop use and quick handling The optical aid is built for everyday handling: durable materials, a treated lens and a viewing field sized to balance magnification with context. The model is particularly suited to small-batch inspection, repair stations and mobile quality checks where an unobtrusive, reliable loupe is preferable to larger bench microscopes. The compact dimensions allow close access to constrained areas, such as PCB components or micro-mechanical parts, where clarity and reach are both required. Trusted partner for precision tasks As part of the Metav IndustryLine, this loupe benefits from a supplier network emphasising consistent quality and availability. The compact optical instrument supports workflows that demand quick visual verification without the overhead of complex measuring equipment, making it a pragmatic choice for shops that value dependable tools and straightforward maintenance. The combination of durable optics and portable design helps bridge bench inspection and on-the-go checks with the same reliable visual performance. For tailored advice on whether the M503.126 suits specific inspection tasks, or to place an order via Metav Werkzeuge, call +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants in Emmerich will be pleased to assist. Technical data Article number: M503.126 Label: Messlupe, 10X, 43 x 29 mm Betrachtungsfeld 33 mm GTIN: 4054469144597 Facts Magnification: 10× Dioptre: 10 Viewing field: 33 mm Dimensions: 29 x Ø43 mm Weight: 0.1 kg Measuring range: 0–33 mm Tariff number: 90138090 Special features Housing: plastic Lens treatment: hardened/coated Category: Optik eClass: 21170343 Main image available FAQ What level of detail can be seen with this loupe? The M503.126 inspection loupe offers 10× magnification, which is suitable for detailed visual checks such as solder-joint inspection, fine surface evaluation and small-part appraisal in workshop environments. Is the lens durable enough for daily workshop use? Yes, the loupe features a hardened/coated lens that improves scratch resistance and maintains image clarity under frequent handling, making it appropriate for routine industrial inspection. Can the loupe be used for electronics and jewellery inspection? The optical and dimensional characteristics of the M503.126 make it well suited to both electronics and jewellery tasks, providing a balance between magnification and a 33 mm viewing field for contextual inspection. How portable is the device for mobile inspections? At 0.1 kg and with compact dimensions, the instrument is designed for portability and low operator fatigue during mobile or bench-top inspections. Does this model include any certification or traceable numbering? The product data lists the GTIN and SKU for traceability; specific calibration or certification details are not indicated for this optical loupe in the supplied data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm/400mm LED Task Lamp 117 LEDs 24W Dimmable Clamp Mount 600Lm 6000–7000K 220–240V - Metav IndustryLine
Take advantage of adjustable, clamp-mounted illumination and a dual 400 mm articulated arm for precise positioning; combined with an extended service life this lamp supports steady inspection and assembly workflows. Order the unit directly via Metav Werkzeuge or consult the Metav team for application advice. M503.167 LED task lamp — articulated inspection light with table clamp and adjustable reach The M503.167 LED task lamp is a dimmable, clamp-mounted work light designed for inspection, optics and fine assembly tasks where precise, shadow‑free illumination and stable mounting are essential Dimmable LED lighting for controlled illumination Articulated 400+400 mm arm for accurate positioning Table clamp mounting for secure attachment Long service life approx. 20,000 h Precision illumination for inspection and optics work An efficient LED module provides a steady, flicker‑free beam that supports visual inspection and assembly tasks with consistent contrast. The dimmable function helps match light output to delicate operations and prevents glare during close‑up work; it also reduces eye strain over long shifts. With a colour temperature of 6000–7000 K, the light sits in a neutral cool white range that aids colour differentiation and sharp detail recognition, making it suitable for optics, electronics inspection and precision assembly. Flexible positioning that shortens set‑up time The lamp's 400 mm + 400 mm articulated arm offers extended reach and micro‑adjustability without losing rigidity. The combination of two articulated segments and an overall compact layout enables rapid alignment over benches, microscopes or measuring stations while keeping the illuminated area consistently directed. The table clamp mounting secures the light to workbenches without consuming bench surface area, supporting quick re‑positioning between jobs and improving process flow on the shop floor. Robust design for continuous workshop use Built for industrial use, this task light balances sturdiness with manoeuvrability. The construction and a notable mass give the assembly a stable feel when clamped, reducing vibration during fine tasks. Rated for an expected service life of around 20,000 h, the unit minimises maintenance intervals and replacement cycles, delivering reliable uptime for repetitive inspection or assembly operations. The product is part of the Metav IndustryLine range and is specified to meet everyday workshop demands. Safe compatibility and simple integration Designed for standard mains environments, the lamp operates on 220–240 V / 50 Hz, ensuring straightforward connection across European workshops. The dimming control and clamp attachment allow integration into existing workstations without special fixtures. The compact overall length and articulated reach make the light adaptable to benches, inspection rigs and optical tables, while the neutral white light aids camera‑based inspection systems and visual quality control. For a tailored recommendation on Metav IndustryLine clamp‑mounted lighting and to confirm suitability for specific inspection tasks, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 — our advisers will assist with selection and delivery. Technical data Article number: M503.167 GTIN: 4054469164601 Category: Optik ECLASS: 27110640 Label: Arbeitsleuchte (LED), 117LEDs/24W, Tischklemmung, dimmbar Gelenke/Arm 400mm/400mm, 100 - 240 V Facts Arm length: 400 + 400 mm Overall length: 500 mm Weight: 6.6 kg Voltage: 220–240 V / 50 Hz Lifespan: approx. 20,000 h Colour temperature: 6000–7000 K Tariff number: 94054099900 Special features Table clamp mounting Dimmable LED Brand: Metav IndustryLine SKU: M503.167 Category path: Optik FAQ Is the lamp suitable for optical inspection work? Yes. The neutral 6000–7000 K colour temperature and dimmable LED make the lamp well suited for optics and inspection tasks requiring accurate colour rendition and contrast. Can the lamp be mounted on any bench? The table clamp provides firm attachment to most benches and work surfaces; the articulated 400 + 400 mm arm allows flexible positioning over microscopes and measuring instruments. What is the expected service life of the LED module? The lamp is specified with an expected service life of approximately 20,000 h, supporting long operational periods between replacements. Does the unit run on standard European mains supply? Yes. The device is compatible with 220–240 V / 50 Hz mains power, enabling immediate use in typical European workshops. Which Metav range does this product belong to? This product is part of the Metav IndustryLine range and is supplied with full Metav distribution and logistics support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 Diopter 127mm Magnifier With LED Stand 2.25×, Dimmable 650 lm 10W, Glass Lens - Metav IndustryLine
Take advantage of a clear view and dependable illumination thanks to a 127 mm glass lens and a dimmable 650 lm LED array; the stable 300×200 mm base and dual articulated arms ensure repeatable inspection conditions. Order the LED Work Magnifier M503.165 directly via Metav Werkzeuge or ask our consultants if needed. LED Work Magnifier M503.165 — 127 mm glass lens, 5 dioptre (Metav IndustryLine) The LED Work Magnifier M503.165 is a bench-mounted inspection lamp designed for precise visual work in workshops, laboratories and quality control stations. Large 127 mm glass lens for clear viewing 5 dioptre magnification (2.25×) for fine detail Dimmable 650 lm LED with 56 SMD diodes Stable 300×200 mm base, mains powered 220–240 V Precision optics for reliable inspection The magnifying head combines a 127 mm glass lens with a 5 dioptre optical strength to deliver a 2.25× enlargement that is well suited to tasks requiring close visual scrutiny. A larger lens diameter not only increases the usable field of view but also reduces the need for constant head repositioning, which in turn improves throughput and lowers the risk of inspection errors. The use of glass for the lens preserves optical clarity over time and resists scratching compared with many plastics, supporting consistent measurement and assembly work. Comfortable, glare-free illumination for detailed tasks Lighting is provided by 56 SMD LEDs producing 650 lm of useful light while consuming 10 W, giving a balance of brightness and energy efficiency. The lamp is dimmable, enabling the illumination level to be matched to the task and to personal comfort, which helps to reduce eye strain during prolonged use. With an expected service life of around 20,000 h, the LED array delivers long-term stability of colour temperature and brightness, reducing maintenance interruptions and ensuring consistent visual conditions for quality assurance processes. Robust bench support for stable measurements A broad 300×200 mm base and a substantial overall mass (approx. 6.6 kg) give the assembly excellent resistance to movement, making it suitable for fixed bench stations where repeatable positioning is required. The dual-arm configuration (300 + 300 mm reach) allows precise placement and easy retraction when space is needed. Mains operation at 220–240 V / 50 Hz removes the need for batteries and provides continuous, reliable power for uninterrupted inspection or assembly cycles. Boosting efficiency across applications This magnifying lamp is engineered for a range of uses from electronic assembly and solder inspection to jewellery making and component assembly. The combination of a wide glass lens, dimmable LED lighting and stable mounting supports faster visual checks with fewer reworks, contributing to a measurable improvement in line efficiency. As a Metav IndustryLine product, the unit fits into a wider supply chain strategy that prioritises reliable sourcing and consistent quality, helping shops and production teams to maintain steady throughput without compromising precision. For precise, consistently lit inspection at the workbench, choose the Metav IndustryLine LED Work Magnifier M503.165 from Metav Werkzeuge — contact Metav Werkzeuge for purchasing advice or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M503.165 GTIN: 4054469144719 ECLASS: 21170614 Tariff code: 90138090 Facts Lens diameter: 127 mm (5") Magnification factor: 2.25× Dioptre: 5 Luminous flux: 650 lm Power consumption: 10 W Lamp life: approx. 20,000 h Weight: 6.6 kg Arm reach: 300 + 300 mm Base dimensions: 300 × 200 mm Supply voltage: 220–240 V, 50 Hz LEDs: 56 SMD Special features Lens material: glass Dimmable LED lighting Stable bench base Mains powered Brand: Metav IndustryLine SKU: M503.165 FAQ What magnification does this magnifier provide? The lamp offers a 5 dioptre lens giving approximately 2.25× magnification, suitable for close visual inspection and detailed assembly work. Is the illumination adjustable to different tasks? Yes — the unit features a dimmable LED array with 56 SMD diodes and an output of 650 lm, allowing the light level to be set for precision inspection or more relaxed assembly tasks. What material is the lens made from? The magnifying element is made of glass, chosen for optical clarity and resistance to long-term abrasion compared with many plastics. Which environments and tasks is this magnifier designed for? The M503.165 is intended for bench use in electronics, watchmaking, jewellery, quality control and similar tasks where stable illumination and precise visual inspection are required. Does the product require batteries or external power? The magnifier is mains powered and operates at 220–240 V / 50 Hz, providing continuous operation without battery changes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Hand Magnifier 6x With Light, 6 Dioptre - Metav IndustryLine
Compact bright inspection with a wide 50 mm lens and 6× magnification ensures precise visual checks even in poor light; the integrated illumination and lightweight design support extended handheld use. Order the hand loupe directly via Metav Werkzeuge or consult our advisors for application guidance and fast delivery. Hand Loupe M503.146 – 50 mm, 6× magnification with illumination (Metav IndustryLine) The Hand Loupe M503.146 is an illuminated handheld magnifier designed for detailed inspection tasks in workshops, jewellery making and quality control applications. 50 mm lens for a wide field of view 6× magnification for detailed inspection Built-in illumination for low-light work Lightweight design at 200 g Precise inspection performance that speeds up decision-making The combination of a 50 mm lens and 6× magnification delivers a noticeably larger field of view than smaller loupes while keeping detail sharp, making surface inspections and solder-joint checks faster and more reliable. The dioptre 6 specification corresponds to the magnification power and is particularly effective for reading fine engravings, circuit traces and textile fibres; as a result, visual quality-control steps can be completed with fewer re-checks, reducing inspection time and downstream rejects. Emphasis on optical clarity supports an efficient workflow in production and bench-level quality assurance. Practical illumination and ergonomics for everyday use An integrated light source illuminates workpieces evenly, removing shadows that can obscure tiny defects. Because the lamp is built into the frame, manual handling is simplified and the focus remains on the component rather than external lights. The loupe operates on 2× mono batteries (not included), keeping the tool cordless and portable for quick spot checks across the shop floor. At around 200 g, the handheld unit balances sturdiness with comfort, allowing extended use without undue fatigue and maintaining steadiness for repeatable visual assessments. Suitable applications and added confidence for professionals The device is well suited to close visual tasks in mechanical workshops, watchmaking, jewellery, electronics assembly and inspection benches where controlled lighting and a wide viewing area matter. The lightweight, ergonomic body makes it practical for mobile inspection rounds and bench work alike. Paired with Metav’s reputation as a precision partner, the loupe contributes to consistent measurement and inspection routines — an asset for teams aiming to standardise visual controls and documentable quality steps. Choose the Metav IndustryLine M503.146 for reliable, illuminated inspection — contact Metav Werkzeuge in Emmerich for tailored advice and dependable supply Technical data Article number: M503.146 GTIN: 4054469144672 ECLASS: 21170614 Customs tariff number: 90138090 Brand: Metav IndustryLine Facts Lens diameter: Ø50 mm Magnification: 6× (dioptre 6) Weight: 0.2 kg Battery: 2× Mono (not included) Special features Integrated illumination Lightweight handheld design Category: Optik Story trigger: optik FAQ Which batteries are required and are they included? The loupe requires 2× mono batteries; batteries are not included with the Metav IndustryLine M503.146. Is this magnifier suitable for jewellery and watchmaking? Yes, the 6× magnification and 50 mm lens make the loupe suitable for jewellery and watchmaking inspection where a wide, clear field is advantageous. Can the built-in light be used for extended inspections? The integrated illumination is intended for prolonged handheld use; its cordless design using 2× mono batteries supports mobile inspection rounds. What advantages does the 50 mm lens offer compared with smaller lenses? A 50 mm lens provides a wider field of view while preserving magnification detail, enabling faster visual checks and fewer repositionings during inspection. Is the loupe part of a certified measuring system? The product is an optical inspection tool from Metav IndustryLine designed for visual assessment tasks; specific calibration certificates are not applicable to this handheld loupe. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x50 3x Folding Thread Counter With Engraved Mm Scale, Rectangular, Aluminium - Peak
Introducing the Peak Folding Magnifier — Rectangular Folding Magnifier, 3x The Peak Folding Magnifier is a compact rectangular 3x folding magnifier designed for precise inspection and measurement in jewellery, watchmaking, textile work and hobby applications. Compact aluminium body in black 3x magnification with double lens correction 50×50 mm field of view for clear overview Engraved mm scale for quick on-the-spot measurements Exceptional clarity for fine inspection tasks The Peak Folding Magnifier delivers 3x magnification with a double lens design that reduces optical aberrations and produces a sharper image than a single-lens loupe. The generous 50×50 mm field of view allows users to see a broader area without frequent repositioning, which speeds up inspection and reduces eye strain. This combination of magnification and a corrected optical path is particularly valuable when evaluating small parts, stitches or surface details. Robust, portable design built for daily use Constructed from Aluminium with a black finish, the folding frame is both durable and lightweight. Its compact dimensions make the magnifier easy to carry and quick to deploy, while the folding mechanism protects the lenses when stored. The solid build ensures a long service life in workshop and field environments, offering reliable performance for professionals and hobbyists alike. Practical measurement and straightforward handling An engraved mm scale is present on each side of the foot, with the scale length matching the width of the field of view to simplify immediate measurements. For users unfamiliar with optical tools, the double lens setup means fewer adjustment attempts are needed to achieve a sharp image, making measurement tasks faster and more dependable. The straightforward design supports repetitive work where speed and accuracy matter. Recommended care and application tips For consistent results, clean the lenses gently with a soft microfiber cloth and avoid abrasive cleaners that could scratch the optical surfaces. When measuring, align the engraved scale with the object edge within the 50×50 mm viewing area to read dimensions directly. The compact nature of the tool makes it ideal for on-site checks, quality control routines and close visual inspection where a simple, precise solution is required. Highly recommended for professionals and enthusiasts who require precise visual inspection: choose the Peak Folding Magnifier and contact METAV Werkzeuge for expert advice by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271 Technical Information Bezeichnung: Peak Folding Magnifier, rectangular, 3x Marke: Peak SKU: MS905.384 Label: Peak Thread Counter 3x Aluminium, black Lens: x2 (double lens) Magnification: 3x Field of view: 50×50 (mm) Material: Aluminium (black) Besonderheit: with engraved mm scale UID: MS905.384 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What is the best use for the Peak Folding Magnifier from Peak as a folding magnifier? The Peak Folding Magnifier by Peak is ideal for jewellery inspection, watch repair, textile checks and hobby tasks where a compact folding magnifier with 3x magnification and a 50×50 mm field of view speeds up detailed work. How does the double lens benefit users of the Peak Folding Magnifier by Peak? The double lens configuration in the Peak Folding Magnifier reduces optical aberrations and delivers a sharper image than single-lens alternatives, which makes fine-detail inspection and measurements easier and more reliable. Can I measure small parts directly with the Peak Folding Magnifier from Peak? Yes, the Peak Folding Magnifier includes an engraved mm scale on each side of the foot; the scale length corresponds to the field of view so measurements can be read directly within the viewing area. Who should consider the Peak Folding Magnifier by Peak? Professionals in watchmaking and jewellery, textile technicians, hobbyists and quality-control personnel will benefit from the Peak Folding Magnifier’s blend of durability, portability and optical precision. Where can I get further technical advice for the Peak Folding Magnifier from Peak? METAV Werkzeuge, the retailer, offers comprehensive and competent advice; contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 for additional technical data or purchasing support
60mm Clamp For Work Light Holder, Adjustable Opening - Metav IndustryLine
A compact clamp that provides a secure mounting solution with a maximum 60 mm jaw opening and a low weight of 0.2 kg, ideal for stable positioning of work lights and small optical accessories; order directly via Metav Werkzeuge or consult our specialists for application advice. Clamp for 503.164 — mounting clamp with max. 60 mm opening by Metav IndustryLine Clamp for 503.164 is a compact mounting clamp designed to secure work lights and optical attachments, offering a reliable grip with a maximum jaw opening of 60 mm for versatile workshop use. Max. 60 mm opening for versatile mounting Lightweight design, approx. 0.2 kg Compatible with M503.167 caliper fittings Robust clamp for optical and lighting setups Stable mounting that reduces repeat adjustments The clamp delivers a secure hold tailored for small optical devices and workshop lighting, thanks to its 60 mm maximum opening which accommodates a wide range of attachment diameters. The design focuses on repeatability: once set, the clamp maintains position under typical workshop loads, minimising the need for re‑alignment during assembly or inspection work. This reliability supports efficient processes and reduces inspection downtime, an important factor in production and maintenance environments. Lightweight handling that speeds up setup Weighing just 0.2 kg, the clamp is easy to manoeuvre and fast to install, which speeds up routine changes in workstations or inspection stations. The low mass reduces operator effort during frequent repositioning and allows for swift configuration of lighting and optical accessories. The compact form factor also contributes to unobtrusive mounting near delicate test rigs, making it suitable where space is limited but stable support is still required. Clear compatibility for workshop integration Designed to interface with established metrology and accessory components, the clamp is compatible with M503.167 fittings and integrates smoothly into optical and illumination setups in laboratories and workshops. The construction is aimed at users seeking a practical, no‑fuss mounting solution for tasks such as visual inspection, small‑part assembly and targeted illumination. Its straightforward function makes it a practical complement to measurement and optical toolkits. For secure mounting backed by Metav IndustryLine reliability, contact Metav Werkzeuge for personalised advice and prompt supply from Emmerich. Technical data Article number: M503.164.1 GTIN: 4054469164571 Customs tariff number: 90139080 Product label: Clamp for 503.164 – max. opening 60 mm Category: Optics Facts Max. opening: 60 mm Weight: 0.2 kg SKU: M503.164.1 Special features Compatible with M503.167 fittings Designed for optical and lighting setups Compact, low‑weight construction FAQ How large is the jaw opening and what does it fit? The clamp offers a maximum jaw opening of 60 mm; the design suits work lights and small optical accessories, compatible with fittings such as M503.167. Is the clamp suitable for repeated repositioning in a production environment? Yes, the clamp for 503.164 is engineered for repeatable, stable mounting so frequent adjustments and repositioning remain precise and straightforward. What is the weight and does that affect handling? At approximately 0.2 kg the clamp is lightweight, which facilitates quick handling and reduces operator fatigue during repeated setups. Can this clamp be integrated with calipers or metrology fixtures? The clamp is compatible with M503.167 caliper fittings and can be integrated into inspection and optical workstations as a practical mounting accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
65 x 65mm Beleuchtungslupe
- mit 6 LED-Leuchten 2 x AAA Batterie erforderlich (nicht im Lieferumfang enthalten)Technische Daten- Linse: 65 x 65mm- Dioptrie: 4
6x 25x25 Field Folding Loupe with Engraved mm Scale, Aluminium - Peak
Peak Folding Loupe — Rectangular Aluminium, 6x Peak Folding Loupe is a compact folding loupe designed for precise close‑up inspection and measurement tasks, featuring 6× magnification and a robust aluminium housing for portable, accurate use. 6× Magnification for clear detail Rectangular aluminium housing for stability Engraved mm scale for quick measurement Wide 25×25 sight field for easier inspection Exceptional magnification and measurement accuracy The Peak Folding Loupe delivers consistent 6× magnification with a single lens assembly (Lens: x1), producing sharp, distortion‑controlled images that aid in jewellery inspection, watch repair, print quality checks and electronics work. The integrated engraved mm scale enables immediate approximate measurements without additional tools, reducing setup time and improving workflow efficiency. This practical combination of magnification and scale turns visual inspection into an actionable task, helping users reach conclusions faster and with greater confidence. Durable design for everyday professional use Built around a aluminium frame, this folding loupe balances lightweight handling with robust protection for the optics. The rectangular form factor increases contact area and steadiness during use, which is particularly beneficial when examining flat surfaces or small assemblies. Users who value reliability and portability will appreciate the solid feel and the protective folding mechanism that keeps the lens safe during transport and storage. Practical field of view and simple handling explained The listed sight field "25x25" describes the visible area when using the loupe, allowing the user to see a larger portion of the inspected object without frequent repositioning. The straightforward single‑lens setup keeps maintenance minimal and provides a clear visual experience for both beginners and experienced professionals. For tasks that require repeated inspections or quick comparisons, the Peak Folding Loupe streamlines the process and reduces handling time. Choose the Peak Folding Loupe from Peak for reliable close‑up inspection and contact METAV Werkzeuge for expert, personalised advice — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 METAV Werkzeuge — the retailer — offers extensive, competent consultation. Not sure whether this tool meets your requirements? Or need additional technical data? No problem — we are happy to help. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product name: Peak Folding Loupe (translated from "Peak Klapplupe") Brand / Manufacturer: Peak SKU: MS905.376 Description: Rectangular aluminium folding loupe, 6× magnification Material: Aluminium Magnification: 6× Lens: x1 Sight field: 25x25 Special feature: With engraved mm scale UID: MS905.376 Manufacturer in english: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What tasks is the Peak Folding Loupe from Peak suitable for? The Peak Folding Loupe by Peak is ideal for detailed inspection tasks such as jewellery appraisal, watchmaking, print inspection and electronics checks, where 6× magnification and the engraved mm scale support precise visual assessment. How do I measure with the Peak Folding Loupe and its engraved mm scale? Using the Peak Folding Loupe (Peak brand), position the loupe over the object and align the engraved mm scale against the feature to be measured; the combination of the 25x25 sight field and the scale allows quick, approximate measurements directly through the loupe. Is the Peak Folding Loupe robust enough for daily professional use? Yes, the Peak Folding Loupe from Peak features an aluminium housing and a protective folding mechanism designed for repeated use and transport, offering a durable solution for professionals and hobbyists alike. Can METAV Werkzeuge provide further technical information about the Peak Folding Loupe? METAV Werkzeuge can supply additional details and personalised advice regarding the Peak Folding Loupe; contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert support.
700mm Stand for Illuminated Magnifier Foot Width 650mm With Castors - Metav IndustryLine
Take advantage of the combination of a 650 mm wide base for stable support, a 700 mm working height for ergonomic viewing and easy mobility thanks to integrated castors. Order the stand directly via Metav Werkzeuge or ask our consultants if needed. Stand for illuminated magnifier (700 mm height, 650 mm base) — Metav IndustryLine A Stand for illuminated magnifier (700 mm height, 650 mm base) designed to provide stable, mobile support at inspection benches and assembly stations. Height 700 mm for ergonomic viewing Stable 650 mm wide base for consistent positioning Smooth castors for easy workshop repositioning Lightweight 6.6 kg for straightforward handling Engineered stability for precise inspection The support column and broad base deliver a stable platform that reduces vibration and movement during fine visual inspection. With a 650 mm base width and a total height of 700 mm, the geometry is optimised for bench-top tasks where repeatable posture and a steady view are essential. The relatively low mass of 6.6 kg keeps the unit manageable while preserving steadiness; this balance helps to maintain consistent inspection results when paired with magnifiers and small optical instruments. Faster workflows through ergonomic positioning and mobility A defined working height of 700 mm positions optics at a practical eye level for seated or standing operators, improving comfort and reducing fatigue during prolonged inspection. The fitted castors enable quick lateral movement between workstations, supporting dynamic production flows and short set-up times. Compatibility with the common model range M503.164–M503.168 ensures straightforward integration with existing illuminated magnifiers, simplifying equipment planning in busy workshops. Practical design for long service life and simple handling The design focuses on functional performance: a broad footprint for repeatable placement, integrated mobility and a compact overall package that is easy to store when not in use. The straightforward construction minimises maintenance needs and reduces points of failure, which supports reliable daily use in industrial and craft environments. As a Metav IndustryLine product, the stand complements the company’s emphasis on accessible precision and dependable supply chains for professional workshops. For tailored workshop integration and ordering of the Metav IndustryLine stand, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical fit and delivery options Technical Data SKU: M503.165.2 GTIN: 4054469181882 Category: Optik Label: Stand for illuminated magnifier, height 700 mm, base width 650 mm, with castors Facts Height: 700 mm Base width: 650 mm Weight: 6.6 kg Compatible models: M503.164–M503.168 Special features With castors for mobility Broad base for stability Designed for bench-top inspection use FAQ What is the working height of this stand? The stand provides a working height of 700 mm, offering an ergonomic viewing position for typical inspection and assembly tasks with illuminated magnifiers. Which magnifier models are compatible with this stand? Compatibility is listed for models M503.164–M503.168; the stand is intended to pair with these illuminated magnifiers for stable support. How mobile is the support during workshop use? Mobility is achieved via integrated castors, enabling easy repositioning of the stand between workstations while maintaining a stable base when settled. Is the stand heavy to handle when relocating? At 6.6 kg the support is lightweight enough for straightforward handling yet substantial enough to provide steady support for bench-top optics. What are the identifiers for ordering and stock control? SKU M503.165.2 and GTIN 4054469181882 identify this Metav IndustryLine stand for procurement and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75/22 mm Hand Magnifier With 2 Loupes And 3 LEDs, Battery AAA Required - Metav IndustryLine
Taking advantage of dual‑lens optics and integrated LED illumination ensures reliable inspection results and comfortable handling during extended tasks; the compact, lightweight design keeps visual checks efficient and portable. Order the M503.141.N hand magnifier directly via Metav Werkzeuge or ask our consultants if needed. M503.141.N Hand magnifier — dual‑lens (Ø70 + Ø22 mm) with LED lighting, Metav IndustryLine The M503.141.N Hand magnifier is a compact inspection tool combining a wide overview lens and a high‑power close‑up lens with built‑in LEDs for clear, shadow‑free magnification in workshop and laboratory environments Dual lenses Ø70 mm and Ø22 mm High magnification: 3 and 45 dioptres Three integrated LED lights for shadow‑free view Lightweight 0.2 kg for handheld use Precision optics that speed up inspection work The combination of a 70 mm overview lens and a 22 mm close‑up lens provides two practical magnification stages—3 dioptre for general inspection and 45 dioptre for fine detailed work—so measurement preparation and visual checks are completed faster. The dual‑lens arrangement reduces the need to swap tools and improves workflow continuity; this is particularly valuable where repeatable, quick visual verification is required. The unit’s precision optics deliver sharp contrast and reduce eye strain, supporting reliable visual decisions in quality control or repair tasks. Bright, even illumination and ergonomic handling Integrated three LED lights create uniform, shadow‑reduced illumination that complements the optical power when inspecting small features. The magnifier is powered by 3×AAA batteries (not included), enabling cordless portability for bench or field use. At just 0.2 kg, the tool combines mobility with balanced handling; the lightweight construction supports sustained use without excessive arm fatigue, improving operator comfort during prolonged inspections and assembly checks. Low maintenance requirements keep downtime to a minimum. Practical applications and durable everyday performance The magnifier suits electronics inspection, jewellery appraisal, stamp and print inspection, and routine workshop checks where quick, clear magnification is essential. The device’s dual‑lens system shortens process steps by enabling both overview and detail views in a single tool, which benefits production sampling and repair workflows. Simple battery replacement and robust construction ensure the magnifier remains a dependable part of inspection kits and quality‑assurance stations. For precise visual inspection, choose the Metav IndustryLine hand magnifier and contact Metav Werkzeuge for expert guidance and reliable supply Technical data Article number: M503.141.N GTIN: 4054469144658 eClass: 21170614 Tariff number: 90138090 Facts Weight: 0.2 kg Lens diameters: 70 mm and 22 mm Magnification: 3 dioptre and 45 dioptre Battery: 3×AAA (not included) Special features Dual‑lens design for overview and close‑up Three integrated LED lights Compact, handheld format Lightweight for prolonged use Suitable for inspection and quality checks FAQ Is a battery included with the magnifier? No. The M503.141.N hand magnifier requires 3×AAA batteries, which are not included with the delivery. What magnification levels are available with this tool? The device offers two magnification stages: a 3‑dioptre overview and a 45‑dioptre close‑up through its dual‑lens system. Can the magnifier be used for electronics inspection? Yes. The combination of a wide overview lens, a high‑power lens and three LEDs makes the M503.141.N suitable for electronics, jewellery and fine‑detail inspection tasks. How portable is the unit for field use? With a weight of 0.2 kg and battery operation, the magnifier is designed for portable use and quick checks away from the bench. What identifiers are available for inventory or ordering? Product identifiers: Article number M503.141.N and GTIN 4054469144658 are provided for ordering and catalogue purposes. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7x Rectangular Aluminium Foldaway Loupe With Engraved Mm-Scale, x1 Lens, 15x15 Field - Peak
Peak Folding Loupe (folding loupe) Peak Folding Loupe is a compact aluminium folding loupe with 7× magnification designed for precise inspection and quick measurements in trade, hobby and quality control. Compact aluminium folding loupe for easy handling 7× Magnification for clear detail recognition Integrated engraved mm scale for accurate measuring Lightweight design for mobile inspections Precision Optics for Reliable Inspection The 7× magnification combined with a single lens (x1) delivers a clear, enlarged view that makes fine details visible without distortion. With a Field of View of 15×15 the Folding Loupe allows focused observation of small surfaces and components, reducing the need for repetitive refocusing. This optical setup supports fast visual checks and reduces inspection time, offering a practical advantage for professionals who need dependable magnification for routine work. Robust Aluminium Construction for Everyday Use Built from Aluminium, the Folding Loupe is engineered for frequent handling and travel. The rectangular design folds into a protective casing that shields the lens when not in use, while the lightweight construction keeps it comfortable for pocket carry. This combination of Durability and portability makes the loupe particularly suitable for technicians, jewellers and field inspectors who require a resilient tool that stands up to daily use. Integrated Scale for Fast, On-the-spot Measurements The loupe features an engraved mm scale that enables immediate, approximate measurements without additional tools. For tasks such as solder joint inspection, jewellery appraisal or print quality checks, this built-in scale speeds decision-making by providing visual reference directly in the magnified view. The scale is particularly helpful for users with limited access to bench instruments, delivering practical measurement support during quick assessments. Support and Advice from the Retailer If you are unsure whether the Folding Loupe meets your specific requirements, or if you need supplementary technical information, METAV Werkzeuge—your retailer—offers comprehensive and competent advice. For personalised assistance please contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271. Expert help is available to clarify applications, compatibility and best practices for use and care of the loupe. We recommend the Peak Folding Loupe for precision inspection tasks; contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Peak Folding Loupe Brand: Peak SKU: MS905.375 Material: Aluminium Magnification: 7× Lens: x1 Field Of View: 15×15 Shape: Rectangular Special Feature: With engraved mm scale UID: MS905.375 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What magnification does the Peak Folding Loupe by Peak (folding loupe) provide? The Peak Folding Loupe from Peak (folding loupe) offers 7× magnification with a single lens (x1), providing a Field of View of 15×15 for detailed inspection. Can the Peak Folding Loupe by Peak (folding loupe) be used for measurements? Yes, the Peak Folding Loupe by Peak (folding loupe) includes an engraved mm scale that allows quick on-the-spot measurements and visual reference during inspections. What is the Peak Folding Loupe by Peak (folding loupe) made of? The Peak Folding Loupe by Peak (folding loupe) is made of Aluminium, combining lightweight handling with robust construction for frequent use. How can I get help choosing the right loupe for my needs? If you need guidance, METAV Werkzeuge can advise on the Peak Folding Loupe by Peak (folding loupe); contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support.
9x Thread Counter, 10x10 Field, with Engraved mm Scale - Peak
Peak Thread Counter — Rectangular Zinc Thread Counter, 9x Peak Thread Counter is a compact optical tool designed for precise textile and print inspection, offering a clear 9x magnification and an engraved millimetre scale for exact measurements. Compact, easy-to-use inspection aid Engraved mm scale on each foot side Rectangular Zinc Body for robust handling 9x Magnification for clear thread counting Wide 10x10 Field of View for fast overview Precision measurement where it matters The Peak Thread Counter provides reliable 9x magnification to count threads and assess fabric structures with ease. Its clear optics and stable rectangular shape allow for accurate alignment on samples, reducing reading errors and speeding up inspection tasks. Professionals benefit from measurable results and repeatable outcomes when documenting textile quality. Durable construction for daily use Manufactured from Zinc (black), this gauge combines a compact footprint with robust resistance to workshop wear. The weight and finish support steady handling and long service life while the design keeps the instrument conveniently portable. The solid build translates into fewer recalibrations and consistent performance during frequent use. Practical features that simplify inspection An engraved mm scale on both sides of the foot enables immediate dimensional reference without additional tools. The lens configuration listed as x2 supports the optical system while the 10x10 Field of View speeds up scanning of larger fabric areas. These practical elements let technicians and hobbyists obtain reliable readings quickly. Clear explanation for first-time users A millimetre scale engraved along the foot corresponds to the visible width of the field of view, so the scale length equals the sample width seen through the lens. This means measurements are direct and intuitive, even for users unfamiliar with optical gauges. The compact dimensions make the device straightforward to position and read, improving workflow efficiency. I recommend the Peak Thread Counter for precise textile inspection — for comprehensive technical advice and personalised support contact METAV Werkzeuge, email info@metav-werkzeuge.com, phone +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Thread Counter Brand: Peak SKU: MS905.380 Secondary designation: rectangular zinc, 9x Material: Zinc (black) Lens: x2 Field of View: 10x10 Magnification: 9x Special feature: with engraved mm scale Additional information: Due to its small dimensions this Thread Counter is easy to handle. A mm scale is engraved on each side of the foot. The scale length corresponds to the width of the field of view. UID: MS905.380 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What is the main use of the Peak Thread Counter from Peak for textile inspection? The Peak Thread Counter by Peak is intended for precise thread counting and fabric structure checks, offering 9x magnification and an engraved mm scale to enable direct measurement and repeatable inspection results. How do I read measurements with the Peak Thread Counter from Peak? Place the Thread Counter flat on the sample and align the fabric within the 10x10 Field of View, then read the engraved mm scale on the foot edge that matches the visible width for an immediate measurement. Is the Peak Thread Counter suitable for frequent professional use? Yes, the zinc construction of the Peak Thread Counter and its compact, ergonomic shape make it suitable for daily quality control tasks in workshops and laboratories. Can beginners use the Peak Thread Counter from Peak without prior training? Beginners can use the Thread Counter easily because the engraved mm scale corresponds to the field of view width, allowing intuitive direct readings and fast learning during inspection routines.
Beleuchtungslupe
Metav IndustryLine Beleuchtungslupe mit 2 LED-Leuchten und zusammenklappbar, mit 2 Lupen und 3 LED-Leuchten, mit LeuchtenTechnische Daten und Zusammenfassung: Hersteller: Metav IndustryLine Bezeichnung: Beleuchtungslupe Batterie: 2xAA (nicht im Lieferumfang enthalten) oder 3xAAA (nicht im Lieferumfang enthalten) je nach Ausführung Besonderheit: mit 2 LED-Leuchten und zusammenklappbar oder mit Leuchten je nach Ausführung Dioptrie: 2+6 bis 6 Gewicht: 0,2 kg Linse: Ø20mm - Ø90mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
inspect faster and with greater certainty using magnifiers
Magnifiers (also known as loupe and magnifying glass) are optical instruments that render small objects and surface details visibly larger, producing a virtual, upright image through a converging lens. In metallography and industrial quality assurance they represent the first stage of optical inspection, offering a fast, reliable check before more detailed analysis with microscopes.
how magnifiers work and where they belong in the workflow
A magnifier’s enlargement is determined mainly by the focal length of its lens: the shorter the focal length, the higher the achievable magnification. Typical workshop types include the hand magnifier for quick surface checks, the folding or inspection magnifier for stable close-up work at the bench, the measuring magnifier with an integrated reticle for direct dimension checks, and the stand magnifier for fatigue-free, repeatable inspection at a fixed working distance. In practice they are indispensable for spotting hairline cracks, corrosion, tiny burrs and for reading fine engravings on components.
practical advantages that improve production throughput
- Rapid first-pass inspection, reducing time sent to downstream process steps and avoiding unnecessary rework.
- Direct measurement capability with measuring magnifiers, enabling quick quantitative checks without switching tools.
- Stable positioning with stand magnifiers, lowering operator fatigue and increasing repeatability.
- Compact, portable options (hand and folding magnifiers) for in-situ checks on assemblies or machines.
- Simple optical design: robust, low-maintenance tools that complement microscopes for layered inspection strategies.
why choose metav as your precision partner
Metav democratises precision by making high-quality measuring tools affordable for every workshop. From our base in Emmerich we act as a quality filter for the European market, supplying over 250,000 products and trusted by more than 48,000 customers. That breadth ensures you can reduce supplier complexity while sourcing the right magnifiers — from portable hand lenses to calibrated measuring models — backed by a consistent supply chain and industrial expertise.
In short, magnifiers provide immediate, reliable optical inspection for workshop and production environments, combining simplicity with measurable time and quality benefits.
faq
What types of magnifiers are commonly used in metal inspection?
Common types used in metal inspection include the hand magnifier for quick checks, the folding or inspection magnifier for close work, the measuring magnifier with reticle for dimension assessment, and the stand magnifier for prolonged, stable inspection.
How does magnification relate to focal length?
Magnification is primarily governed by the focal length of the lens: a shorter focal length results in higher magnification, which determines how much larger the virtual, upright image appears compared with the naked eye.
Can magnifiers replace microscopes for quality assurance?
Magnifiers are intended as a first-line optical inspection tool; they are ideal for rapid checks and measurements but do not replace detailed analysis performed with microscopes, which are required for higher-magnification examination and microstructural evaluation.
Are measuring magnifiers suitable for quantitative checks on welds and cracks?
Yes. Measuring magnifiers with an integrated reticle or scale enable direct, quantitative assessment of features such as crack widths, groove depths or small weld defects, speeding up in-process decisions.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com