Enhanced inspection with loupe viewing
Loupes provide quick, magnified visual assessment for metalworking and quality assurance, helping operators detect surface defects and measure fine features with minimal setup; they serve applications from metallography to workshop inspection by offering handheld, folding and stand-mounted options that suit different tasks and working distances. The tools are designed to deliver a clear virtual, upright image via a converging lens, where magnification depends on focal length, and they support both rapid checks and more precise measurements when equipped with a scale. Using a loupe improves throughput by enabling early detection of faults, protecting downstream processes and reducing rework through faster decision-making based on visual inspection, surface analysis and dimensional checking.
73mm x 77mm Precision Loupe 4x Magnification, Ø58mm Field - Peak
Take advantage of high optical clarity and precise scaled readings to speed up film and detail inspections; the compact design with 4x magnification and an anastigmatic lens ensures reliable verification on the workbench. Order directly via Metav Werkzeuge or consult our specialists for application advice. MS905.216 — 4x inspection loupe with anastigmatic lens by Peak The MS905.216 is a compact inspection loupe designed for precise measurement and visual inspection of photographic film and fine details in workshop environments. 4x magnification for clear inspection Anastigmatic lens for sharp edge-to-edge clarity Ø58 mm visible field for broader overview Scaled reading at 0.1 for precise measurement Accurate readings for detailed inspections The MS905.216 inspection loupe delivers repeatable, calibrated checks across a useful measurement range 0–54 mm, thanks to its fine scale 0.1 mm. The clear, scaled view reduces interpretation time during quality checks and helps standardise routine inspections. With measurable values visible directly through the optics, the instrument supports rapid decision‑making in both production and repair tasks. This section explains how measurable specifications translate into faster, more reliable checks on small parts and film. Optical engineering that preserves contrast and edge detail An anastigmatic lens minimises distortion and maintains high contrast across the entire viewing area, so edges and fine structures remain sharp to the edge. The result is a wider, more usable visible field Ø58 mm, which reduces the need to reposition samples and therefore speeds up inspection cycles. For operators seeking consistent image fidelity, the optical design reduces eye fatigue and improves defect detection compared with simple single‑lens magnifiers. Practical compatibility with photographic and film work Designed specifically for the inspection of (photographic) films, the loupe combines magnification and a generous field of view to examine frames, negatives and printed materials with minimal handling. The optical configuration supports quick checks of grain, scratches and registration marks while preserving the original sample integrity. The compact footprint and simple scaled readout mean this instrument integrates smoothly with film bench workflows and portable inspection setups. Built for everyday workshop verification The compact dimensions (Ø73 x 77) make the loupe a space‑efficient addition to any inspection bench or quality station. The robust optical assembly and intuitive scale reduce set‑up time for repetitive checks, enhancing throughput without introducing complexity. For mixed production environments where both speed and precision matter, this loupe offers a practical balance between optical performance and straightforward handling. Contact Metav Werkzeuge for an application review and to confirm whether the MS905.216 fits the intended inspection task; our Emmerich team can provide technical guidance and delivery options Technical data Article number: MS905.216 Manufacturer: Peak Product: Inspection loupe (4x) Facts Dimensions: Ø73 x 77 mm Visible field: Ø58 mm Magnification: 4x Scale: 0.1 Measurement range: 0–54 mm Special features Lens type: anastigmatic Suitable for: inspection of (photographic) films Category: Optics SKU: MS905.216 FAQ What measurement range can be checked with this loupe? The MS905.216 supports a measurement range of 0–54 mm, allowing straightforward inspection of small parts and film sections within that span. Is the optical performance suitable for photographic film inspection? Yes, the anastigmatic lens and Ø58 mm visible field make the loupe well suited to examining negatives, frames and printed film without frequent repositioning. How precise is the scaled readout? The instrument features a scale of 0.1 mm, providing fine graduations for precise, repeatable checks during routine quality control. Can the loupe be used on a bench or handheld? The compact dimensions (Ø73 x 77 mm) allow both bench placement and handheld use for quick verifications and mobile inspections. Which brand manufactures this loupe? This inspection loupe is supplied by Peak and identified as MS905.216 for ordering and technical reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75/22 mm Hand Magnifier With 2 Loupes And 3 LEDs, Battery AAA Required - Metav IndustryLine
Taking advantage of dual‑lens optics and integrated LED illumination ensures reliable inspection results and comfortable handling during extended tasks; the compact, lightweight design keeps visual checks efficient and portable. Order the M503.141.N hand magnifier directly via Metav Werkzeuge or ask our consultants if needed. M503.141.N Hand magnifier — dual‑lens (Ø70 + Ø22 mm) with LED lighting, Metav IndustryLine The M503.141.N Hand magnifier is a compact inspection tool combining a wide overview lens and a high‑power close‑up lens with built‑in LEDs for clear, shadow‑free magnification in workshop and laboratory environments Dual lenses Ø70 mm and Ø22 mm High magnification: 3 and 45 dioptres Three integrated LED lights for shadow‑free view Lightweight 0.2 kg for handheld use Precision optics that speed up inspection work The combination of a 70 mm overview lens and a 22 mm close‑up lens provides two practical magnification stages—3 dioptre for general inspection and 45 dioptre for fine detailed work—so measurement preparation and visual checks are completed faster. The dual‑lens arrangement reduces the need to swap tools and improves workflow continuity; this is particularly valuable where repeatable, quick visual verification is required. The unit’s precision optics deliver sharp contrast and reduce eye strain, supporting reliable visual decisions in quality control or repair tasks. Bright, even illumination and ergonomic handling Integrated three LED lights create uniform, shadow‑reduced illumination that complements the optical power when inspecting small features. The magnifier is powered by 3×AAA batteries (not included), enabling cordless portability for bench or field use. At just 0.2 kg, the tool combines mobility with balanced handling; the lightweight construction supports sustained use without excessive arm fatigue, improving operator comfort during prolonged inspections and assembly checks. Low maintenance requirements keep downtime to a minimum. Practical applications and durable everyday performance The magnifier suits electronics inspection, jewellery appraisal, stamp and print inspection, and routine workshop checks where quick, clear magnification is essential. The device’s dual‑lens system shortens process steps by enabling both overview and detail views in a single tool, which benefits production sampling and repair workflows. Simple battery replacement and robust construction ensure the magnifier remains a dependable part of inspection kits and quality‑assurance stations. For precise visual inspection, choose the Metav IndustryLine hand magnifier and contact Metav Werkzeuge for expert guidance and reliable supply Technical data Article number: M503.141.N GTIN: 4054469144658 eClass: 21170614 Tariff number: 90138090 Facts Weight: 0.2 kg Lens diameters: 70 mm and 22 mm Magnification: 3 dioptre and 45 dioptre Battery: 3×AAA (not included) Special features Dual‑lens design for overview and close‑up Three integrated LED lights Compact, handheld format Lightweight for prolonged use Suitable for inspection and quality checks FAQ Is a battery included with the magnifier? No. The M503.141.N hand magnifier requires 3×AAA batteries, which are not included with the delivery. What magnification levels are available with this tool? The device offers two magnification stages: a 3‑dioptre overview and a 45‑dioptre close‑up through its dual‑lens system. Can the magnifier be used for electronics inspection? Yes. The combination of a wide overview lens, a high‑power lens and three LEDs makes the M503.141.N suitable for electronics, jewellery and fine‑detail inspection tasks. How portable is the unit for field use? With a weight of 0.2 kg and battery operation, the magnifier is designed for portable use and quick checks away from the bench. What identifiers are available for inventory or ordering? Product identifiers: Article number M503.141.N and GTIN 4054469144658 are provided for ordering and catalogue purposes. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75x Peak Standard Template Typ 34 - Peak
Take advantage of the 75× magnification and the Type 34 configuration for consistent optical checks; order via Metav Werkzeuge or consult their specialists for supply and application advice. Peak standard reticle Type 34 — 75× optical reference A Peak standard reticle designed as a precise optical reference for inspection microscopes and comparator systems in metrology and quality control. 75× magnification for clear reference Type 34 geometry for standardised checks Designed for optical calibration tasks Compatible with inspection microscopes Fast and reliable reference for optical checks A compact reference such as this standard reticle delivers a dependable visual benchmark for routine inspections and alignment tasks. The combination of 75× magnification and defined markings provides an immediate, high‑contrast image that simplifies measurement procedures and reduces setup time. By using a fixed optical reference, measurement uncertainty from subjective interpretation is lowered and reproducibility between operators is improved. The reticle’s layout supports quick verification of scale, focus and relative positions in optical systems, enhancing throughput without compromising precision. Measurable repeatability and workflow integration The Type 34 configuration gives a recognisable pattern that is easy to compare across multiple sessions. That recognisability supports consistent calibration checks and fosters statistically meaningful repeatability in inspection routines. Integration into existing workflows is straightforward: mount the reticle in the instrument’s eyepiece or imaging plane and use the pattern as a baseline for dimensional assessments. Regular use of this optical reference helps maintain traceable process control and contributes to faster decision‑making on production lines where visual tolerances are critical. Practical advice for use and maintenance To preserve functionality, handle the reticle by its edges and store it in a dust‑free sleeve when not in use. Routine visual inspections under known illumination and the correct focus setting ensure the inspection microscopes deliver consistent imaging at 75×. For additional technical specifications, compatible mounts or recommended cleaning procedures, Metav Werkzeuge can provide expert guidance and documentation; their support helps implement the reticle into laboratory or workshop environments with minimal disruption. For precise calibration advice and supply of the Peak standard reticle Type 34, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss technical details and delivery options. Technical Data Article number: MS905.237 Manufacturer: Peak Product name: Peak standard reticle Type: Type 34 Category: Optics Main image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/74/4a/d0/67/67d04a7452eeab2aa78be171/MS905243-main.jpg Facts Magnification: 75× Special features Designed for optical measurement Type 34 configuration for standard checks Suitable for inspection microscopes FAQ What is the primary purpose of this reticle? The Peak standard reticle Type 34 (MS905.237) serves as a visual reference for optical measurement and alignment tasks at 75× magnification, aiding routine checks and verification. Which equipment is compatible with this reference? The reticle is intended for use with inspection microscopes and optical comparators that accept eyepiece or imaging‑plane reticles; its 75× specification matches systems calibrated to that magnification. How does the Type 34 pattern support repeatability? The defined geometry of Type 34 provides clear, repeatable markers that simplify comparative readings and reduce variation between successive inspections. What handling and storage is recommended? Handle by the edges, keep the reticle in a protective sleeve when not in use, and avoid abrasive or solvent cleaning to preserve the optical markings. Is a calibration certificate included with the product? The provided data does not indicate an included calibration certificate; options for traceable calibration can be arranged separately if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75x Template Type 35 - Peak
Benefit from the combination of 75x magnification, the compact Type 35 format and Peak brand consistency for reliable optical inspection results; order the item directly via Metav Werkzeuge or consult their advisors for additional guidance. Peak Schablone — Type 35 optical template with 75x magnification A durable optical template from Peak designed to support precise visual inspection and measurement tasks in laboratory and workshop optics. 75× magnification for detailed inspection Type 35 optical template Peak brand, catalogue item MS905.239 Precise visual inspection, measurable outcomes The 75x magnification provides a clear enlargement for detecting fine details that would otherwise be missed at lower powers. As an optical template, this accessory assists in visual comparison, defect identification and layout verification under an inspection microscope or magnifier. The specification focuses procurement decisions on measurable performance rather than vague promises, enabling improved quality control and reduced rework rates in production and repair workflows. Seamless fit into inspection workflows The Type 35 format is intended for straightforward integration into established optical setups and inspection benches. Lab technicians and quality engineers can rely on the repeatable visual reference it offers for component checks and alignment tasks. By choosing a catalogue item such as MS905.239, inventory management and traceability are simplified, helping to maintain consistent inspection standards across shifts and sites. Practical procurement and identification When specifying equipment for purchasing lists or maintenance spares, the clear designation Peak Schablone Type 35 and the SKU MS905.239 remove ambiguity. The entry under the Optik category makes it easy to find alongside other optical aids and accessories. Including these exact identifiers in orders or work orders reduces lead-time risk and ensures the correct tool is supplied for optical comparison and measurement duties. Handling, storage and verification advice To preserve optical clarity and prolong service life, store the template in a clean, dust-free environment and handle it with lint-free gloves or wipes to avoid fingerprints on critical surfaces. Periodic visual verification against a calibrated reference proves the template remains fit for purpose; document checks to support quality records and compliance. Simple care routines reduce the likelihood of false rejections and maintain reliability during daily inspection tasks. For procurement advice or to place an order for the Peak Schablone Type 35 (SKU MS905.239), contact Metav Werkzeuge for product guidance and reliable supply from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.239 Product: Peak Schablone Typ 35 Brand: Peak Category: Optik Facts Magnification: 75x Special features Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/74/4a/d0/67/67d04a746977996463b6e3b4/MS905245-main.jpg FAQ What magnification does the template provide? The template offers 75x magnification, which is suitable for detailed visual inspection tasks and close comparison work with microscopes and magnifiers. Which product designation ensures correct ordering? Order using the designation Peak Schablone Type 35 or SKU MS905.239 to ensure the exact optical template is supplied. For which tasks is this optical template suitable? The template is intended for visual inspection, defect detection and alignment checks where a defined magnification reference supports decision-making and documentation. How should the template be stored to maintain performance? Store the template in a clean, dry place and avoid touching optical surfaces; routine visual verification against a reference is recommended to confirm ongoing suitability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7x Magnifier Set With Five Templates, 6 Pieces - Peak
Take advantage of a compact inspection kit that combines 7x magnification and a set of tracing templates to speed up visual checks and marking tasks; order the set directly via Metav Werkzeuge or request guidance from our consultants for workshop integration. MS905.155 – Peak 7x loupe set with five templates A MS905.155 set designed for close visual inspection and template-based marking in workshops and laboratories 7x magnification for detailed inspection Includes five tracing templates for marking Compact, portable inspection kit Suitable for workshop and laboratory use Detect fine detail faster with a high-magnification loupe The combination of a 7x magnification loupe and a compact optical design enables quicker identification of scratches, burrs and print defects. Visual inspection tasks are simplified because faults are made more visible without complex equipment; the loupe’s optical power supports accurate assessment of small features while reducing the need for repeated handling. This yields more efficient quality checks and a lower probability of overlooked defects, improving throughput for routine inspections. Consistent marking and repeatable templates for workshop workflows The included templates (numbers 2, 3, 7, 8 and 10) provide standardised shapes for tracing and comparison, which helps to maintain uniformity across parts and assemblies. Templates are useful for rapid go/no-go checks and for marking reference points before processing. When combined with the loupe, the templates support precise alignment and visual confirmation of edges and contours, so marking and inspection steps become both faster and more reliable. Portable inspection kit that integrates into production and bench work Housed as a small inspection set, the components are easy to store and carry between workstations or to use on the shop floor. The compact format supports ad hoc checks during assembly or downstream inspection without the need for bench-mounted microscopes. This flexibility is particularly valuable for small workshops and service departments where space and time are at a premium, and where quick, repeatable visual verification is required. Reliable aid for quality control and routine maintenance The inspection set is suited for a broad range of visual tasks, from incoming goods checks to final inspections. Its straightforward functionality reduces training time and can be used by operators who are not specialist metrologists. The kit supports a pragmatic quality routine: rapid assessment with the loupe, followed by template-based confirmation, which together form a simple and traceable inspection sequence. For reliable visual inspection in busy workshops choose the Peak MS905.155 inspection set and contact Metav Werkzeuge for availability and practical purchasing advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: MS905.155 Brand: Peak Item type: Set Facts Magnification: 7x Items per set: 6 Accessories included: x5 templates (No. 2, 3, 7, 8 and 10) Special features Intended use: Optical inspection and marking tasks Compact, portable format Ideal for workshop and laboratory environments FAQ What magnification does the inspection set provide? The set provides a 7x magnification loupe for visual inspection and detailed checks. Which templates are included with the kit? The kit includes five tracing templates: numbers 2, 3, 7, 8 and 10, supplied together with the loupe in the set. How many items are delivered in one set? One set contains six items in total, comprising the loupe and the five templates (SKU MS905.155). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7x Rectangular Aluminium Foldaway Loupe With Engraved Mm-Scale, x1 Lens, 15x15 Field - Peak
Peak Folding Loupe (folding loupe) Peak Folding Loupe is a compact aluminium folding loupe with 7× magnification designed for precise inspection and quick measurements in trade, hobby and quality control. Compact aluminium folding loupe for easy handling 7× Magnification for clear detail recognition Integrated engraved mm scale for accurate measuring Lightweight design for mobile inspections Precision Optics for Reliable Inspection The 7× magnification combined with a single lens (x1) delivers a clear, enlarged view that makes fine details visible without distortion. With a Field of View of 15×15 the Folding Loupe allows focused observation of small surfaces and components, reducing the need for repetitive refocusing. This optical setup supports fast visual checks and reduces inspection time, offering a practical advantage for professionals who need dependable magnification for routine work. Robust Aluminium Construction for Everyday Use Built from Aluminium, the Folding Loupe is engineered for frequent handling and travel. The rectangular design folds into a protective casing that shields the lens when not in use, while the lightweight construction keeps it comfortable for pocket carry. This combination of Durability and portability makes the loupe particularly suitable for technicians, jewellers and field inspectors who require a resilient tool that stands up to daily use. Integrated Scale for Fast, On-the-spot Measurements The loupe features an engraved mm scale that enables immediate, approximate measurements without additional tools. For tasks such as solder joint inspection, jewellery appraisal or print quality checks, this built-in scale speeds decision-making by providing visual reference directly in the magnified view. The scale is particularly helpful for users with limited access to bench instruments, delivering practical measurement support during quick assessments. Support and Advice from the Retailer If you are unsure whether the Folding Loupe meets your specific requirements, or if you need supplementary technical information, METAV Werkzeuge—your retailer—offers comprehensive and competent advice. For personalised assistance please contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271. Expert help is available to clarify applications, compatibility and best practices for use and care of the loupe. We recommend the Peak Folding Loupe for precision inspection tasks; contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Peak Folding Loupe Brand: Peak SKU: MS905.375 Material: Aluminium Magnification: 7× Lens: x1 Field Of View: 15×15 Shape: Rectangular Special Feature: With engraved mm scale UID: MS905.375 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What magnification does the Peak Folding Loupe by Peak (folding loupe) provide? The Peak Folding Loupe from Peak (folding loupe) offers 7× magnification with a single lens (x1), providing a Field of View of 15×15 for detailed inspection. Can the Peak Folding Loupe by Peak (folding loupe) be used for measurements? Yes, the Peak Folding Loupe by Peak (folding loupe) includes an engraved mm scale that allows quick on-the-spot measurements and visual reference during inspections. What is the Peak Folding Loupe by Peak (folding loupe) made of? The Peak Folding Loupe by Peak (folding loupe) is made of Aluminium, combining lightweight handling with robust construction for frequent use. How can I get help choosing the right loupe for my needs? If you need guidance, METAV Werkzeuge can advise on the Peak Folding Loupe by Peak (folding loupe); contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support.
8 Standard Template, Nr. 8 - Peak
Take advantage of the combination of brand-backed reference, standardised format and clear identification to streamline optical inspection tasks. Order the Peak Standard Template No. 8 directly via Metav Werkzeuge or consult our experts for tailored advice. Peak Standard Template No. 8 (MS905.275) — optical reference template The Peak Standard Template No. 8 serves as a compact, clearly identified reference for optical inspection and component comparison in quality control and visual measurement workflows Peak standard reference template No. 8 Compact optical reference for inspections Clear identification with SKU MS905.275 Consistent reference for repeatable optical checks A standards template is primarily a reference stencil that supports reliable visual comparison and alignment during inspections. The Peak Standard Template No. 8 provides a uniform benchmark that reduces interpretation variance between operators, which improves repeatability in routine checks. For workshops and inspection stations where consistent visual assessment matters, a clearly defined reference reduces rework and accelerates decision-making without requiring additional measuring equipment. Streamlined inspection workflow and time savings By using a dedicated reference template, inspection steps become more structured and faster to execute. The compact format and unambiguous markings enable quick placement and evaluation, offering a tangible efficiency gain in daily production or laboratory routines. This time-saving effect is particularly relevant for repetitive visual checks, where small reductions per cycle compound into measurable throughput improvements. The template’s simple handling also lowers threshold for staff training and ensures a steady inspection pace. Practical compatibility with optical setups The reference stencil is suitable for integration into various optical quality-control environments, including visual comparators and light-table inspections. As a visual aid, it complements digital measurement where a rapid on-the-spot assessment is required. The design supports straightforward mounting or placement during comparative tasks and enables clear photographic documentation when required. Its role is to act as a dependable visual standard within broader inspection routines rather than as a replacement for calibrated measuring instruments. Reliable brand choice and consistent supply Sourcing a recognised reference such as this template from Peak ensures transparency in identification and ordering (SKU MS905.275). Coupled with Metav’s distribution network, the product fits into a dependable supply chain that prioritises consistent availability for workshops and specialist resellers. For procurement and planning, the combination of a recognised stencil and reliable logistics reduces the risk of process interruptions and helps maintain quality-control continuity. Contact Metav Werkzeuge today for expert advice and to secure the Peak Standard Template No. 8 (MS905.275) for dispatch from Emmerich. Technical data Article number: MS905.275 Product name: Peak standard template No. 8 Category: Optics Identifiers and type SKU: MS905.275 Type: No. 8 Applications and features Application: optical inspection / visual reference Brand: Peak Use case: quality control and component comparison FAQ What is the primary purpose of this template? The Peak Standard Template No. 8 (MS905.275) is intended as a consistent visual reference to support optical inspection and comparative checks in quality-control workflows. Can the template be used alongside digital measurement systems? Yes, the template complements digital measurement by offering a quick visual benchmark for immediate assessment and photographic documentation within inspection routines. Which environments benefit most from this reference stencil? Workshops, optical component manufacturers and inspection labs that perform frequent visual comparisons or alignment checks benefit from using this reference. How is the product identified for ordering? Order using SKU MS905.275 and the designation Peak Standard Template No. 8 to ensure exact match with the listed reference template. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm Stand Magnifier 2.2x Flexible Arm With Stable Base - Peak
Take advantage of the combination of precise visual inspection, a flexible arm with stable base, and compact dimensions for consistent quality checking on the bench; order the unit directly via Metav Werkzeuge or contact our consultants for tailored advice. Peak Stand Magnifier – 2.2× magnification, 90 mm lens, flexible arm The Peak Stand Magnifier is a bench-mounted inspection loupe designed for close visual checks, assembly tasks and quality control in workshops and laboratories. 2.2× magnification with clear optics 90 mm lens for broad field of view Flexible arm with stable base for precise positioning Compact footprint for small benches Speed up inspection and reduce rework with clearer detail The large 90 mm lens combined with 2.2× magnification provides a wide, distortion-free viewing area that helps identify small defects faster than unaided sight. By making fine features and solder joints easier to evaluate, the inspection loupe supports quicker decision-making and reduces the likelihood of rework, contributing to a more efficient production flow. The optical clarity is particularly useful for repeat visual checks during quality control and for close-assembly operations where visual certainty saves time and materials. Precise positioning that improves ergonomics and repeatability The flexible arm with a stable base enables accurate, fatigue‑reducing positioning of the lens over the workpiece. The articulated support allows the viewer to lock the loupe in place once the ideal angle and distance are found, improving repeatability of inspections and lowering neck and shoulder strain during extended tasks. This ergonomic advantage not only enhances operator comfort but also maintains consistent inspection results across shifts, supporting reliable quality assurance routines. Compact design that integrates seamlessly into the workshop Measuring 145x120x485, the unit has a small bench footprint while delivering a broad inspection field, so it fits into busy workstations without obstructing other equipment. The robust base keeps the loupe steady during delicate tasks, and the overall construction is tailored for everyday use in industrial and craft environments. The combination of a broad lens and a manoeuvrable arm makes this stand magnifier suitable for electronic assembly, small‑parts inspection and laboratory checks where space and precision matter. Contact Metav Werkzeuge for specialist guidance on integrating the Peak inspection tools into production or to request a quotation – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MS905.428 Manufacturer: Peak Model name: Peak Stand Magnifier Facts Dimensions: 145x120x485 Lens diameter: 90 Magnification: 2.2x Special features Flexible arm with stable base Designed for bench inspection and assembly Broad field of view for detailed visual checks FAQ What magnification does the magnifier offer? The unit provides 2.2× magnification, suitable for detailed visual inspection and assembly tasks. How large is the viewing lens? The lens has a 90 mm diameter, offering a wide field of view for easier inspection of small components. Is the loupe suitable for repeated bench work? Yes, the flexible arm and stable base are designed to enable comfortable positioning and repeatable inspections during extended tasks. What type of tasks is this loupe intended for? This stand magnifier is intended for quality control, electronic assembly, small‑parts inspection and laboratory checks where clear visual detail is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9x Thread Counter, 10x10 Field, with Engraved mm Scale - Peak
Peak Thread Counter — Rectangular Zinc Thread Counter, 9x Peak Thread Counter is a compact optical tool designed for precise textile and print inspection, offering a clear 9x magnification and an engraved millimetre scale for exact measurements. Compact, easy-to-use inspection aid Engraved mm scale on each foot side Rectangular Zinc Body for robust handling 9x Magnification for clear thread counting Wide 10x10 Field of View for fast overview Precision measurement where it matters The Peak Thread Counter provides reliable 9x magnification to count threads and assess fabric structures with ease. Its clear optics and stable rectangular shape allow for accurate alignment on samples, reducing reading errors and speeding up inspection tasks. Professionals benefit from measurable results and repeatable outcomes when documenting textile quality. Durable construction for daily use Manufactured from Zinc (black), this gauge combines a compact footprint with robust resistance to workshop wear. The weight and finish support steady handling and long service life while the design keeps the instrument conveniently portable. The solid build translates into fewer recalibrations and consistent performance during frequent use. Practical features that simplify inspection An engraved mm scale on both sides of the foot enables immediate dimensional reference without additional tools. The lens configuration listed as x2 supports the optical system while the 10x10 Field of View speeds up scanning of larger fabric areas. These practical elements let technicians and hobbyists obtain reliable readings quickly. Clear explanation for first-time users A millimetre scale engraved along the foot corresponds to the visible width of the field of view, so the scale length equals the sample width seen through the lens. This means measurements are direct and intuitive, even for users unfamiliar with optical gauges. The compact dimensions make the device straightforward to position and read, improving workflow efficiency. I recommend the Peak Thread Counter for precise textile inspection — for comprehensive technical advice and personalised support contact METAV Werkzeuge, email info@metav-werkzeuge.com, phone +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Thread Counter Brand: Peak SKU: MS905.380 Secondary designation: rectangular zinc, 9x Material: Zinc (black) Lens: x2 Field of View: 10x10 Magnification: 9x Special feature: with engraved mm scale Additional information: Due to its small dimensions this Thread Counter is easy to handle. A mm scale is engraved on each side of the foot. The scale length corresponds to the width of the field of view. UID: MS905.380 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What is the main use of the Peak Thread Counter from Peak for textile inspection? The Peak Thread Counter by Peak is intended for precise thread counting and fabric structure checks, offering 9x magnification and an engraved mm scale to enable direct measurement and repeatable inspection results. How do I read measurements with the Peak Thread Counter from Peak? Place the Thread Counter flat on the sample and align the fabric within the 10x10 Field of View, then read the engraved mm scale on the foot edge that matches the visible width for an immediate measurement. Is the Peak Thread Counter suitable for frequent professional use? Yes, the zinc construction of the Peak Thread Counter and its compact, ergonomic shape make it suitable for daily quality control tasks in workshops and laboratories. Can beginners use the Peak Thread Counter from Peak without prior training? Beginners can use the Thread Counter easily because the engraved mm scale corresponds to the field of view width, allowing intuitive direct readings and fast learning during inspection routines.
Beleuchtungslupe
Metav IndustryLine Beleuchtungslupe mit 2 LED-Leuchten und zusammenklappbar, mit 2 Lupen und 3 LED-Leuchten, mit LeuchtenTechnische Daten und Zusammenfassung: Hersteller: Metav IndustryLine Bezeichnung: Beleuchtungslupe Batterie: 2xAA (nicht im Lieferumfang enthalten) oder 3xAAA (nicht im Lieferumfang enthalten) je nach Ausführung Besonderheit: mit 2 LED-Leuchten und zusammenklappbar oder mit Leuchten je nach Ausführung Dioptrie: 2+6 bis 6 Gewicht: 0,2 kg Linse: Ø20mm - Ø90mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
MS905.216 Precision Template for MS905.216, Optical Standard - Peak
Benefit from Peak quality, direct compatibility with the MS905.216 precision caliper and easy integration into optical measuring workflows. Order the Peak standard template directly via Metav Werkzeuge or ask our consultants if technical clarification is required. Peak standard template — standard template for precision calipers, compatible with MS905.216 Peak standard template is a compact reference device for optical measurement tasks, designed to be used with the MS905.216 precision caliper and to support consistent measurement routines in inspection and laboratory environments. Compatible with MS905.216 precision caliper Designed for optical measuring workflows Peak quality and consistent production Faster, more consistent optical checks with a standard reference A standard template provides a repeatable reference that supports optical measurements and quick verification steps in routine inspection work. Where instruments need a known geometry or reference edge to confirm setup, a template reduces guesswork and shortens preparation time. The compatibility with a recognised precision caliper means that verification steps can be documented and reproduced, helping to maintain process control across shifts and operators. Simple integration into existing measuring routines The unit is specified for use alongside the MS905.216, so integration into established workflows is straightforward. The explicit compatibility avoids adapter guessing and reduces the time spent on fixture design. For teams that run frequent optical checks, this alignment between template and measuring tool contributes to smoother throughput and fewer interruptions for re-setup, supporting measurable gains in daily efficiency. A reliable partner in the measurement chain Selecting a standardised reference from a known brand reduces uncertainty in procurement and inspection planning. Metav’s position as a precision partner complements the template by offering broad supply options and application advice; the Emmerich location acts as a logistical and quality filter for European customers. The combination of an established reference device and Metav’s distribution ensures availability and informed consultation for workshop and lab environments. Contact Metav Werkzeuge for detailed compatibility advice on the Peak standard template (MS905.217) or to request supplementary technical data by phone or email Technical data Article number: MS905.217 Brand: Peak Product name: Peak standard template (for MS905.216) Core data Compatible with MS905.216 precision caliper Category: optics Special features Intended use: optical measurements and reference checks Visual asset available: MS905286-main.jpg FAQ What is the intended application of the Peak standard template? The Peak standard template (MS905.217) is intended as a reference device for optical measurements and verification tasks when used with precision calipers such as the MS905.216. Is the template directly compatible with the MS905.216 caliper? Yes, compatibility with the MS905.216 precision caliper is a defined characteristic of the Peak standard template, which simplifies integration into existing measuring routines. Can the template be used in laboratory and workshop environments? The template is suitable for inspection and laboratory workflows where optical reference checks are required; it supports repeatable verification steps in both settings. Are there visual references or images available for the product? An image asset (MS905286-main.jpg) is available to illustrate the Peak standard template and aid in selection and setup planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
MS905.401 Precision Template for MS905.400, Optical Standard - Peak
Take advantage of straightforward compatibility with the MS905.400 caliper and a clear reference role in optical measurement setups; the SKU MS905.401 identifies this Peak accessory for streamlined integration. Order directly via Metav Werkzeuge or contact our consultants for verification and application advice. Peak Standard template for MS905.400 — optical reference accessory The Peak Standard template is a compact reference accessory intended to be used with the MS905.400 caliper for optical measurement and checking tasks. Compatible with MS905.400 caliper Intended for optical measurement tasks Peak branded accessory Easy integration into measuring setups Consistent reference that supports repeatable optical measurements A dedicated reference template stabilises measurement routines and reduces variability between setups. When paired with a compatible measuring caliper such as the MS905.400, this accessory provides a repeatable datum that helps maintain consistent results across batches. In practical terms, a stable reference shortens setup time, reduces measurement scatter and supports traceable comparison between parts. The emphasis is on reliable alignment and a clearly defined baseline for optical checks rather than on altering the primary measuring instrument. Simplified calibration and clearer measurement workflows Using a standard template in the optical workflow clarifies the calibration status and simplifies documentation. The template functions as a physical benchmark during verification steps, allowing straightforward visual checks and facilitating the recording of deviations. For workshops and quality teams this means fewer ambiguous measurements and improved process control. Technical staff who perform routine inspections benefit from an easier handover between operators because the template defines the reference geometry used during each check. Practical integration and support for workshop use The template is intended for direct integration into existing optical measuring setups that include the MS905.400 caliper, requiring minimal adjustment to current procedures. Technical guidance and application advice are available to ensure correct use in measurement chains and to align the accessory with inspection plans. The accessory complements existing equipment by providing a stable reference point that supports faster inspections and clearer pass/fail assessment without replacing calibration instruments. For assured optical references with the Peak standard template (MS905.401), contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility with MS905.400 calipers and to request specialist application advice. Technical data Article number: MS905.401 Brand: Peak Product name: Peak Standard template for MS905.400 Category: Optics Core specifications Compatible with caliper MS905.400 SKU: MS905.401 Category path: Optik Special features Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/7d/30/d0/67/67d0307d42f0750198b460b3/MS905286-main.jpg Intended use: Reference template for optical measurement workflows Brand reference: Peak FAQ What is the primary purpose of the template? The Peak Standard template (MS905.401) serves as a reference device for optical measurement workflows and provides a repeatable datum when used alongside the MS905.400 caliper. Is this template compatible with other calipers? Compatibility is specified for the MS905.400 caliper; the product data lists the accessory as intended for use with that model. Does the product data state the material of the template? The material is not specified in the provided product data; please consult Metav Werkzeuge for material details and suitability for specific measurement environments. Can the template be used to support calibration documentation? Yes, the template is intended to act as a physical benchmark during verification steps and can aid in documenting repeatable measurement baselines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Nr. 2 Peak Standard Template - Peak
The Peak standard template Nr. 2 delivers a clear optical reference for inspection and alignment, combining straightforward identification with reliable procurement via Metav Werkzeuge. Benefit from standardised comparison marks and an exact ordering reference to keep inspection workflows consistent; order directly through Metav Werkzeuge or consult their specialists for application guidance. Peak Standard Template Nr. 2 — Optical reference for inspection and alignment A Peak Standard Template Nr. 2 serving as a compact optical reference for visual inspection and equipment alignment in workshop and laboratory environments. Optical reference template Designation Nr. 2 for standard comparison SKU MS905.274 for ordering Peak brand identification Ensure consistent visual inspection with a standard optical reference A standardised reference reduces uncertainty during visual checks and calibration routines. The optical reference provided by this template supplies a repeatable basis for comparison, which supports faster decision-making in quality workflows. By relying on a clearly designated reference, traceability of inspection outcomes is improved and routine checks become more consistent across different shifts or sites. Speed up alignment and quality-control procedures Using a defined template helps streamline quality control tasks and alignment operations on benches and inspection rigs. The template's role as a stable reference point shortens setup and verification times, enabling technicians to focus on measurement accuracy rather than recalibration. This leads to fewer interruptions in production and a more efficient inspection cycle overall. Integrate the template into diverse optical workflows The template is suitable for inclusion in various inspection scenarios where a visual standard is required. Its compact identification as Nr. 2 makes cataloguing and retrieval straightforward, simplifying inventory management and reducing procurement ambiguities. The clear SKU reference supports rapid reordering and ensures the exact variant is specified during purchases. Procurement clarity and administrative benefits A concise product identity and SKU minimise procurement errors and support transparent stock keeping. The designation MS905.274 provides an unambiguous order reference for purchasing departments and suppliers, which is particularly valuable for companies managing multiple inspection aids. Centralising orders through a trusted distributor further reduces administrative effort and ensures dependable supply. For precise optical referencing choose the Peak Standard Template Nr. 2 and contact Metav Werkzeuge for tailored advice and prompt fulfilment from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: MS905.274 Designation: Peak Standard Template Type designation: Nr. 2 Facts Category: Optik SKU: MS905.274 Special features Brand: Peak Image available: yes FAQ What is the primary function of this template? The Peak Standard Template Nr. 2 functions as an optical reference for visual inspection and alignment, providing a repeatable comparison point for quality-control checks. Can this template be used in workshop and laboratory environments? Yes. The template is intended for workshop and laboratory inspection routines where a defined optical standard supports consistent results. How is the product identified for ordering? Order using the SKU MS905.274 and the designation Peak Standard Template Nr. 2 to ensure the correct item is supplied. Does the template support traceability in inspection processes? Inclusion of a clearly defined template like this aids traceability by standardising the reference used in inspections and simplifying documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø100mm Hand Magnifier 2x, Metal Frame - Metav IndustryLine
Robust metal frame construction combined with a Ø100 mm lens and comfortable 2× magnification makes this handheld inspection tool ideal for repetitive visual checks and detailed assembly tasks. Lightweight handling reduces fatigue during extended use. Order the hand magnifier directly via Metav Werkzeuge or consult our specialists for application guidance. Hand magnifier, 100 mm, 2× (M503.133) — handheld inspection lens by Metav IndustryLine The Hand magnifier, 100 mm, 2× is a portable inspection aid designed for visual quality control in workshop, laboratory and hobby environments, providing a wide field of view for jewellery, electronics and print inspection. Large Ø100 mm field of view 2× magnification, 2 dioptres Durable metal frame Weighs only 150 g for handheld use Efficient inspection with a wide visual field The large Ø100 mm lens delivers a noticeably wider viewing area than small loupe heads, which reduces the need to reposition the object during inspection and speeds up repetitive tasks. With 2× magnification (2 dioptres) the viewer benefits from enlarged detail without significant loss of depth of field, making the tool suitable for visual quality control, label or print checks and coarse solder-joint inspection. The optical properties prioritise a practical balance between enlargement and usability so that routine checks remain efficient and reproducible. Durable build for day-to-day workshop work A metal frame gives the magnifier structural stability and resistance to workshop wear, while the low overall mass (approximately 150 g) keeps the unit easy to hold for longer periods. The construction reduces flex in the holding assembly, which contributes to a steadier image and fewer re-takes during quality checks. This robustness supports frequent handling across production, service and inspection environments and is engineered to minimise downtime related to tool replacement. Versatile applications and straightforward handling The device suits a range of tasks from component inspection on PCBs to jewellery appraisal and hobbyist model work. The combination of a wide lens and moderate magnification enables comfortable working distance and faster orientation on the workpiece, which is particularly useful when scanning larger areas for defects. The optical specification is clear: Ø100 mm for coverage, 2× magnification for discernible detail — a pragmatic choice where high throughput and reliable visual assessment are required. Simple care for consistent performance Maintaining optical clarity is straightforward: use a soft, lint‑free cloth and a mild lens cleaner; avoid abrasive materials or aggressive solvents that could damage coatings. Store the magnifier in a dry place and protect the lens from scratches during transport. Proper handling preserves both the optical quality and the functional lifetime of the frame, ensuring dependable performance across repeated inspection cycles. For procurement or specification support for the Metav IndustryLine Hand magnifier M503.133, contact Metav Werkzeuge to discuss delivery, compatibility and ordering options Technical data Article number: M503.133 GTIN: 4054469144641 Tariff number: 90138090 Numbers Lens diameter: Ø100 mm Magnification: 2× Dioptre: 2 Weight: 0.15 kg Materials & features Frame material: Metal Category: Optik eCl@ss: 21170614 Story trigger: optik FAQ What magnification and lens size does this magnifier offer? The hand magnifier provides 2× magnification (2 dioptres) with a Ø100 mm lens, supplied under SKU M503.133 for straightforward identification. Is the magnifier suitable for electronics and solder inspection? Yes, the combination of a wide lens and moderate magnification makes it appropriate for visual checks on PCBs and larger solder joints, where a comfortable working distance and rapid scanning are required. How should the lens be cleaned to avoid damage? Clean the lens with a soft, lint‑free cloth and a mild lens cleaner; avoid abrasive pads and harsh solvents to preserve coatings and optical clarity. What material is the frame made from and how does it affect durability? The frame is made from metal, providing increased structural stability and resistance to everyday workshop wear for reliable handling during frequent inspections. Can this magnifier be used for jewellery appraisal and hobby modelling? Yes, the wide field and 2× magnification suit jewellery checks, stamp and coin inspection, and model making, where both coverage and clear detail matter. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø10mm 4x Monocular Telescope 10° Angle, Ø22.5x53 Field 29Ø/mm & 175Ø/m - Peak
Take advantage of the compact 4x magnification and Ø10 mm objective to inspect close details with a wide field of view; order the MS905.208 through Metav Werkzeuge or contact our consultants for tailored advice. Peak monocular telescope MS905.208 — compact 4x inspection monocular with Ø10 mm lens Peak monocular telescope MS905.208 is a compact, single‑eyepiece optical instrument for quick visual inspection and field checks in workshops and on site 4x magnification for quick overview Ø10 mm objective for compact optics Wide field of view: 29Ø/mm and 175Ø/m Close focus at 220 mm for near inspection Efficient overview with strong optical performance The compact monocular delivers 4x magnification and a small objective diameter, providing a balance between portability and visual clarity. The combination of Ø10 mm lens and the specified field of view values supports rapid scanning of components and scenes, enabling faster decision‑making during visual inspections. Technical figures are provided for objective comparison and to support precise procurement decisions. Practical benefits for close and near inspection Designed for tasks that require attention to fine detail at relatively short distances, the instrument’s close focus of 220 mm allows inspection of small features without external focusing accessories. The compact housing, given by dimensions of Ø22.5 x 53 mm, makes the device easy to carry and position in confined spaces. The optical specifications translate into a practical tool for repetitive visual checks in maintenance, quality control or field surveying. Simple handling meets field versatility The monocular’s straightforward operation suits rapid checks and on‑the‑move use. Its single‑eyepiece layout reduces setup time and supports one‑handed handling, which is advantageous during assembly inspections or when comparing multiple components. The stated field data—29Ø/mm and 175Ø/m—indicate a broad visual coverage that simplifies locating features before a closer measurement task. Integration into workshop workflows and purchasing confidence As an easy‑to‑store and portable optical aid, this model complements measuring equipment and cameras in a workshop environment. The technical data provide a clear basis for selection within an equipment list, while the compact form reduces storage needs. For customers seeking assured supply and expert consultation, Metav’s distribution offers transparent order handling and a reliable logistics base in Emmerich. For detailed technical clarification or to acquire the Peak monocular telescope MS905.208, contact Metav Werkzeuge for personalised advice and secure delivery — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: MS905.208 Product name: Peak monocular telescope MS905.208 Lens diameter: Ø10 mm Dimensions: Ø22.5 x 53 mm Facts Magnification: 4x Close focus: 220 mm Angle: 10° Special features Brand: Peak Product type: monocular telescope Field of view: 29Ø/mm and 175Ø/m Compact optical housing FAQ What magnification does this monocular offer? The monocular provides 4x magnification, specified for the Peak monocular telescope MS905.208 to support rapid visual overview tasks. Can this device be used for near inspection tasks? Yes, the instrument has a close focus of 220 mm, which allows clear inspection of small features without additional accessories. How large is the viewing field? Field of view is listed as 29Ø/mm and 175Ø/m, indicating a broad coverage suitable for quick scanning and locating points of interest. Is the monocular suitable for workshop and field use? The compact dimensions (Ø22.5 x 53 mm) and simple one‑eyepiece design make it well suited for workshop checks and portable field inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø27/Ø36x33 Peak Loupe 15x Coated Achromatic Lens With Large Acrylic Cap - Peak
Take advantage of 15x magnification and an achromatic, coated lens to speed up inspection tasks and reduce rework; the integrated large acrylic cap protects optics during storage. Order directly via Metav Werkzeuge for reliable supply and advice, or contact the Metav consultants for technical clarification. Peak magnifier 15x — coated achromatic lens, acrylic cap A Peak magnifier 15x for precise visual inspection and close-up work in workshops, laboratories and hobby settings. 15x magnification for detailed inspection Coated, achromatic lens for high clarity Large acrylic cap protects the optics Compact Ø27/Ø36x33 design for easy handling Higher accuracy through improved optics The combination of 15x magnification and an achromatic, coated lens delivers clearer, more faithful images than standard single-element magnifiers. Chromatic aberration—colour fringing that blurs fine edges—is reduced by the achromatic design, while the multi-layer coating increases light transmission and reduces reflections. For inspection tasks where measurement and defect detection matter, this optical configuration improves decision-making and reduces the likelihood of costly rework. Practical design that protects fragile optics A durable large acrylic cap is supplied to shield the lens from dust and knocks when not in use. The compact construction with dimensions Ø27/Ø36x33 mm keeps the instrument easy to store and quick to deploy at the bench. The small footprint facilitates handheld use as well as placement on inspection jigs, enabling quicker routine checks without compromising stability or field of view. Clear relevance for diverse precision tasks This magnifier is suited to electronics inspection, jewellery and watchmaking, stamp and print inspection, model-making and other precision trades. The combination of strong magnification and corrected optics supports tasks that require detailed visual assessment rather than measurement alone. For workshops seeking affordable, reliable visual tools, the magnifier bridges the gap between simple loupe and fixed microscope. Low-maintenance handling and straightforward integration Cleaning is simple: keep the lens covered with the supplied acrylic cap when idle and use a soft, lint-free cloth with approved optical cleaner for routine maintenance. The robust yet compact form means minimal ancillary equipment is required to integrate the magnifier into existing workstations. For buyers who prioritise dependable everyday performance, the unit combines practical handling with optical reliability. For confident close-up inspection with Peak’s 15x achromatic optics, contact Metav Werkzeuge for tailored advice and dependable delivery from Emmerich; e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.114 Name: Peak magnifier Magnification: 15x Lens: coated and achromatic Special feature: with large acrylic cap Dimensions: Ø27/Ø36x33 Category: Optics Facts Magnification value: 15x Size specification: Ø27/Ø36x33 Special features Coated, achromatic lens Large acrylic cap for protection Compact, portable design FAQ What level of magnification does the magnifier provide? The magnifier offers 15x magnification, suitable for detailed visual inspection tasks where small features must be examined closely. How does the achromatic, coated lens improve image quality? The achromatic design reduces colour fringing and the multi-layer coating increases light transmission and contrast, resulting in sharper, more accurate images for inspection. Is the optical element protected in storage? Yes, the device includes a large acrylic cap that shields the lens from dust and accidental scratches during storage. Which tasks are best suited to this magnifier? The magnifier is ideal for electronics, jewellery and watch inspection, stamp and print checking, and other precision hobbies and workshop tasks requiring close visual scrutiny. Can this magnifier replace a microscope for measurement work? This magnifier supports detailed visual checks but is not a measuring microscope; consider a dedicated microscope or measuring system for calibrated dimensional inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø28x30 22x Inspection Loupe Coated Achromatic Lens, Ø28x30 - Peak
Compact optical inspection with a focus on clarity and portability: combine 22× magnification, a coated, achromatic lens and a compact Ø28×30 form for efficient verification of fine work. Order the loupe directly via Metav Werkzeuge or consult our specialists for application advice. Peak loupe 22× – Coated, achromatic lens for precision inspection The Peak loupe is a compact optical loupe designed for inspection and verification tasks in workshops and quality control environments, offering high-contrast magnification for precision work. Coated achromatic lens for colour-correct imaging 22× magnification for fine detail inspection Compact Ø28×30 design for handheld use Suitable for verification of precision work Sharp, low‑distortion imaging for reliable decisions The loupe delivers 22× magnification with a coated, achromatic lens, which reduces chromatic aberration and improves image contrast. An achromatic lens pairs elements of different glass types to correct colour fringing; the result is a clearer, truer view of edges and surfaces. For inspection tasks where dimensional judgements and surface assessment are required, this optical combination supports reproducible observations and reduces the risk of false readings. The optical performance is stated in measurable terms so that inspection processes can be planned with predictable visual acuity. Compact layout engineered for everyday workshop use With a compact Ø28×30 footprint, the instrument is suitable for handheld examination and benchside checks without obstructing the workpiece. The small form factor makes handling straightforward and enables rapid switching between tools and measuring instruments during an inspection routine. Durability in the workshop environment is supported by the coated surfaces of the optics, which minimise reflections and ease cleaning. The design is therefore aligned with operational efficiency: quick visual checks are possible without a dedicated station, speeding up process control and reducing cycle time for routine inspections. Wide applicability across precision trades and quality control The loupe is suited to a range of applications where fine detail must be assessed: component inspection, solder joint review, watch and jewellery appraisal, and general quality control tasks. Its high-contrast optics are especially useful when verification of edges, prints and etched markings is required. Because the device is intended for verification rather than measurement, it complements calibrated instruments such as a precision caliper by enabling rapid visual confirmation before and after measurement. For environments that demand traceable workflows, the loupe provides consistent visual reference during acceptance procedures. Contact Metav Werkzeuge for tailored application advice, availability and ordering—call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss suitability for specific inspection tasks Technical data Article number: MS905.116 Name: Peak loupe Brand: Peak Facts Magnification: 22× Dimensions: Ø28×30 Special features Lens: coated and achromatic Suitable for inspection of precision work Category: Optics FAQ What level of magnification does the loupe provide? The loupe offers 22× magnification, which is suitable for detailed visual inspection of fine features and surface conditions. How does the achromatic coating improve the image? An achromatic, coated lens minimises colour fringing and surface reflections, producing sharper, higher‑contrast images for more reliable visual assessment. Is the loupe suitable for workshop use alongside measuring tools? Yes. The loupe is designed for benchside and handheld inspection and complements measurement tools such as a precision caliper when verifying small parts and assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø34x41 Precision Loupe 10x Inspection For Tissue And Negatives - Peak
Combining 10× magnification with a compact Ø34×41 profile, this loupe enables fast, reliable visual checks of textiles, surface structures and photographic negatives while reducing inspection time and rework; order the Peak Lupe directly via Metav Werkzeuge or consult the specialists for application advice. Peak Lupe 10× – Inspection loupe with 10× magnification and compact Ø34×41 profile The Peak Lupe is an inspection loupe offering 10× magnification for close examination of textiles, surface structures and photographic negatives in workshops, studios and quality-control stations 10× magnification for detailed inspection Compact Ø34×41 profile for tight spaces Suitable for textiles, surfaces and negatives Faster, more reliable visual checks in quality workflows With a clear 10× magnification, the inspection lens brings small details into sharp view, enabling quicker defect detection and fewer overlooked faults. The optical performance supports repeatable surface assessment and close visual measurement tasks, so inspection cycles become more efficient. By using a precise handheld magnifier, operators can verify fineness of weave, surface texture and contrast in negatives without resorting to larger microscopy equipment, helping maintain throughput and reduce downstream corrective work. Compact handling that fits into routine inspections Designed for portability and frequent use, this compact loupe integrates simply into existing inspection routines. The small Ø34×41 footprint allows placement on crowded benches or in inspection pockets, making it suitable for on-the-spot checks in production lines and photographic studios. The loupe’s form supports steady handheld operation and short-duration examinations, so visual control tasks can be completed quickly while maintaining consistent precision across multiple components or frames. Clear application focus and practical benefits Intended for the inspection of textiles, fine structures and photographic negatives, the magnifier provides a clear field for visual grading and documentation tasks. The optical tool assists in identifying fibre flaws, surface inconsistencies and film grain issues that are otherwise difficult to appraise with the naked eye. As a simple, low-footprint instrument, it complements more advanced metrology tools by offering an immediate, low-cost method for preliminary analysis and sorting prior to laboratory measurement. Contact Metav Werkzeuge today to discuss how the Peak Lupe 10× can improve inspection accuracy in your workflow; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: MS905.112 Manufacturer: Peak Designation: Peak Lupe Core Data Magnification: 10× Dimensions: Ø34×41 Special features Suitable for inspection of textiles, structures and photographic negatives Category: Optik FAQ What magnification does the loupe provide? The loupe offers 10× magnification, enabling detailed visual inspection for small features and defects. Which materials and applications are suitable for this magnifier? The inspection lens is suitable for the examination of textiles, surface structures and photographic negatives, supporting routine quality checks. Is the loupe portable enough for production-line use? Yes, the compact Ø34×41 profile makes the loupe easily portable and convenient for on-the-spot inspections. How does the Peak Lupe support visual quality control? By magnifying small imperfections and surface details, the loupe speeds up preliminary sorting and reduces the need for immediate lab-level analysis. What is the article number for ordering and reference? The article number for ordering is MS905.112, listed under the Peak inspection loupe. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø35x33 Precision Caliper Magnifier 15x, Ø20 Field Scale 0.1mm, 0–14mm Measuring Range - Peak
Combine 15x magnification, a 0.1 mm scale and a compact Ø20 mm sight field for reliable small-part inspection; benefit from precise readings across a 0–14 mm measuring range. Order the loupe directly via Metav Werkzeuge or consult our specialists for suitability and stock information. Peak Measuring Loupe MS905.270 — 15x magnification, 0–14 mm range A compact Peak Measuring Loupe 15x designed for precise inspection and direct measurement of small components in workshops and quality-control environments 15x magnification for detailed inspection 0.1 mm scale for precise measurement Ø20 mm sight field for clear visibility Faster, more reliable small-part measurement with clear magnification The combination of 15x magnification and a 0.1 mm scale converts close visual inspection into measurable data, enabling consistent checks of small components without constant tool changes. The integrated scale covers a 0–14 mm range, which supports repetitive measurement tasks and reduces handling time. Using a single inspection instrument for both visual assessment and direct measurement improves throughput and lowers the risk of measurement errors, which benefits production continuity and quality assurance workflows. Compact layout that fits the bench and the hand for routine inspection With an overall dimension of Ø35 x 33 mm and a generous Ø20 mm sight field, the loupe combines a small footprint with comfortable observation area. The resulting compact design allows easy placement next to assembly jigs or on inspection benches without obstructing adjacent tools. The clear sight field delivers quick orientation on parts such as circuit boards, fasteners or jewellery, so inspection cycles are shorter and tactile handling is minimised, supporting cleaner, safer workflows in confined workspaces. Integrates into quality routines to cut rework and speed decisions The inspection magnifier converts a visual check into an actionable measurement, making it suitable for inline quality checks, first-article inspections and repair benches. Faster decision-making is enabled by the clear, scalable readout and the magnified view, which together reduce uncertainty and the need for repeat measurements. For labs and workshops seeking to standardise basic dimensional checks, this instrument provides a dependable, low-complexity solution that supports consistent traceability and fewer production interruptions. Contact Metav Werkzeuge for availability and tailored technical advice on the Peak Measuring Loupe MS905.270 — mention the SKU for faster handling by our specialists Technical data Article number: MS905.270 Manufacturer: Peak Product name: Peak Measuring Loupe 15x Facts Magnification: 15x Measuring range: 0–14 mm Scale: 0.1 mm Sight field: Ø20 mm Dimensions: Ø35 x 33 mm Special features Compact inspection loupe Direct measurement capability Suitable for small-part inspection and quality control FAQ How precise are measurements with this loupe? The loupe provides a 0.1 mm scale and 15x magnification, enabling repeatable measurements across the stated 0–14 mm range for routine dimensional checks. Can this instrument be used for electronic components and jewellery? Yes; the enlarged view and Ø20 mm sight field make the loupe suitable for inspection of small electronic parts, jewellery and other fine-detail components. Is the loupe handheld or bench-mounted? The device is designed for handheld inspection and for easy placement on benches; its compact design and small footprint suit diverse workshop setups. Does the Peak Measuring Loupe require calibration? For standard workshop checks the integrated 0.1 mm scale is used as supplied; if traceable calibration is required, consult Metav Werkzeuge for recommended procedures. What is the product reference for ordering? Order or request information quoting the article number MS905.270 for the Peak Measuring Loupe 15x to ensure precise handling of enquiries. Manufacturer: Peak; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø35x55 Magnifying Loupe 5x, General Use - Peak
Take advantage of the combination of compact design, clear optics and simple handling for efficient visual inspection in workshop and field tasks. The loupe’s 5× magnification and pocket-friendly dimensions ensure quicker defect detection and easier marking checks; order directly via Metav Werkzeuge or consult our specialists for technical guidance. Peak Lupe — Inspection loupe with clear optics for workshop use A compact inspection loupe by Peak Lupe suitable for general workshop inspection, measuring support and close-up visual checks in electronics, jewellery or mechanical workshops. 5× magnification for precise inspection Compact Ø35×55 design for tight spaces Suitable for general caliper applications Pocket-friendly inspection lens for field use Faster, more reliable visual checks with high magnification The 5× magnification delivers a clear enlargement that reduces inspection time and increases detection reliability for small flaws, solder joints or engraved markings. As a practical inspection tool, the magnifier helps transform visual uncertainty into measurable observations; the optical enlargement brings fine details within comfortable viewing distance, shortening iterative checking cycles and improving process throughput. Compact form factor that fits the workshop workflow With a small footprint of Ø35×55, this loupe is designed to be carried and used wherever quick inspections are required. The compact shape allows access to confined spaces and close proximity work without obstructing tools or instruments. Compatibility with common measurement routines is supported by its suitability for general caliper applications, enabling clearer readings of scale marks and verification tasks alongside precision measuring instruments. Low-maintenance handling for daily use The optical design prioritises straightforward handling: hold the lens steady, position the object at the correct working distance and inspect. Routine care is simple — wipe the lens with a lint-free cloth and keep it in a protective pouch between uses to avoid scratching. These practical maintenance steps preserve the loupe’s performance and ensure consistent clear optics over time, reducing downtime and maintaining inspection quality. Versatile for multiple trades and inspection needs This inspection loupe is a versatile addition for technicians, watchmakers, electronics assemblers and quality controllers who need rapid visual verification. The compact magnifier supports both detailed inspection and quick go/no-go checks, making it a useful companion at the bench or on-site. The straightforward functionality means it integrates easily into existing workflows, providing measurable benefits in accuracy and speed. For a reliable purchase and expert advice on the Peak Lupe, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for product information and ordering options Technical Data Article number: MS905.110 Name: Peak Lupe SKU: MS905.110 Facts Magnification: 5× Dimensions: Ø35×55 Category: Optics Special features Suitable for general caliper applications Brand: Peak Image available: MS905110-main.jpg FAQ How strong is the magnification and what does it show? The loupe offers 5× magnification, which brings small surface details, solder joints and fine markings into clear view for inspection and verification. Can this loupe be used alongside precision calipers? Yes — the Peak Lupe is suitable for general caliper applications and supports clearer reading of scale marks during measurement tasks. Is specialised maintenance required to keep the optics clear? No specialised maintenance is needed; regular cleaning with a lint-free cloth and protective storage will maintain the loupe’s clear optics. Which trades benefit most from this inspection loupe? Technicians in electronics, jewellery, watchmaking and mechanical workshops benefit from the compact magnifier for quick defect detection and detail checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
inspect faster and with greater certainty using magnifiers
Magnifiers (also known as loupe and magnifying glass) are optical instruments that render small objects and surface details visibly larger, producing a virtual, upright image through a converging lens. In metallography and industrial quality assurance they represent the first stage of optical inspection, offering a fast, reliable check before more detailed analysis with microscopes.
how magnifiers work and where they belong in the workflow
A magnifier’s enlargement is determined mainly by the focal length of its lens: the shorter the focal length, the higher the achievable magnification. Typical workshop types include the hand magnifier for quick surface checks, the folding or inspection magnifier for stable close-up work at the bench, the measuring magnifier with an integrated reticle for direct dimension checks, and the stand magnifier for fatigue-free, repeatable inspection at a fixed working distance. In practice they are indispensable for spotting hairline cracks, corrosion, tiny burrs and for reading fine engravings on components.
practical advantages that improve production throughput
- Rapid first-pass inspection, reducing time sent to downstream process steps and avoiding unnecessary rework.
- Direct measurement capability with measuring magnifiers, enabling quick quantitative checks without switching tools.
- Stable positioning with stand magnifiers, lowering operator fatigue and increasing repeatability.
- Compact, portable options (hand and folding magnifiers) for in-situ checks on assemblies or machines.
- Simple optical design: robust, low-maintenance tools that complement microscopes for layered inspection strategies.
why choose metav as your precision partner
Metav democratises precision by making high-quality measuring tools affordable for every workshop. From our base in Emmerich we act as a quality filter for the European market, supplying over 250,000 products and trusted by more than 48,000 customers. That breadth ensures you can reduce supplier complexity while sourcing the right magnifiers — from portable hand lenses to calibrated measuring models — backed by a consistent supply chain and industrial expertise.
In short, magnifiers provide immediate, reliable optical inspection for workshop and production environments, combining simplicity with measurable time and quality benefits.
faq
What types of magnifiers are commonly used in metal inspection?
Common types used in metal inspection include the hand magnifier for quick checks, the folding or inspection magnifier for close work, the measuring magnifier with reticle for dimension assessment, and the stand magnifier for prolonged, stable inspection.
How does magnification relate to focal length?
Magnification is primarily governed by the focal length of the lens: a shorter focal length results in higher magnification, which determines how much larger the virtual, upright image appears compared with the naked eye.
Can magnifiers replace microscopes for quality assurance?
Magnifiers are intended as a first-line optical inspection tool; they are ideal for rapid checks and measurements but do not replace detailed analysis performed with microscopes, which are required for higher-magnification examination and microstructural evaluation.
Are measuring magnifiers suitable for quantitative checks on welds and cracks?
Yes. Measuring magnifiers with an integrated reticle or scale enable direct, quantitative assessment of features such as crack widths, groove depths or small weld defects, speeding up in-process decisions.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com