Enhanced inspection with loupe viewing
Loupes provide quick, magnified visual assessment for metalworking and quality assurance, helping operators detect surface defects and measure fine features with minimal setup; they serve applications from metallography to workshop inspection by offering handheld, folding and stand-mounted options that suit different tasks and working distances. The tools are designed to deliver a clear virtual, upright image via a converging lens, where magnification depends on focal length, and they support both rapid checks and more precise measurements when equipped with a scale. Using a loupe improves throughput by enabling early detection of faults, protecting downstream processes and reducing rework through faster decision-making based on visual inspection, surface analysis and dimensional checking.
35mm Template Plate Nr. 2 - Peak
Benefit from high-precision marking and straightforward integration: the No. 2 template with Ø35 mm ensures consistent alignment for optical inspection and reduces setup time in repetitive tasks. Order the component directly via Metav Werkzeuge or request tailored advice from our consultants. Peak optical template No. 2 — Ø35 mm precision ring Peak optical template No. 2 provides a compact, ring-shaped guide for precise optical alignment and inspection tasks in workshops and production lines Peak optical template No. 2 Ø35 mm Designed for precise lens alignment Lightweight and stable ring shape Ready for integration into inspection workflows Consistent alignment for repeatable inspections The ring guide delivers reliable alignment for small optical components, translating the template’s fixed Ø35 mm diameter into repeatable positioning. By using a defined reference geometry, measurement variation is reduced and setup cycles are shortened, which supports higher throughput on repeat jobs. The clear, unambiguous form of the template helps technicians achieve consistent results even with limited metrology experience, lowering the risk of rework. Faster workflows with simple handling Thanks to its compact form and intuitive fit, this optical guide shortens preparation and inspection times. The design focuses on practical efficiency: quick placement and stable seating minimise handling steps and increase process rhythm. The direct consequence is less downtime between measurements and a more predictable production schedule, making the template a pragmatic choice for small-batch and serial inspection tasks. Seamless fit into existing inspection processes Built to complement standard optical fixtures and jigs, the template integrates without extensive modification of existing setups. The clear geometry supports visual and instrument-based checks and is suitable for a wide range of optics-related workshop tasks. Where repeatability and traceable positioning matter, this ring template becomes a dependable tool in the inspection toolkit, helping to maintain component quality across shifts. Contact Metav Werkzeuge for tailored advice on integrating the Peak optical template No. 2 (MS905.183) into inspection processes; stock is held in Emmerich and consultation is available for workflow alignment. Product details Article number: MS905.183 Brand: Peak Designation: Peak optical template No. 2 Type: No. 2 Facts Diameter: Ø35 mm Category: Optics Asset image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/81/2e/d0/67/67d02e8142e38a433141cfdf/MS905183-main.jpg Special features Compact ring geometry for optical alignment Suitable for inspection and positioning tasks SKU: MS905.183 FAQ What is the intended use of this template? The Peak optical template No. 2 (MS905.183) is intended as a positioning guide for optical alignment and inspection tasks where a fixed Ø35 mm reference improves repeatability. Is the Ø35 mm diameter compatible with precision jigs? Yes, the Ø35 mm dimension matches common small-scale inspection fixtures and can be used as a repeatable reference within existing jigs and holding devices. Can the template be used for instrument-based measurements? The ring form supports both visual alignment and instrument-assisted checks; the Peak optical template is designed to provide a stable reference for measurement equipment. How does the template help reduce setup time? By providing a defined geometry and secure seating, the template reduces trial adjustments and enables faster, repeatable placement, cutting overall preparation time per part. What product identifier should be referenced when ordering? Reference MS905.183 or Peak optical template No. 2 when enquiring or ordering to ensure the correct Ø35 mm guide is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35mm Template Standard Ø35mm - Peak
Take advantage of the combination of the Standard design and the 35 mm diameter for consistent layout work in optical workshops; order the item directly via Metav Werkzeuge or consult the sales team if assistance is required. Peak templates — Standard Ø35 mm (MS905.181) The Peak templates provide a standard-format stencil for optical workshop tasks, designed to support consistent positioning and simple identification in layout and measurement processes. Standard shape for consistent results 35 mm diameter for precise repeatability Suitable for optical workshop applications Reliable geometry for repeatable layout work The standard-format stencil delivers a consistent outline that supports repeatable procedures in optical fabrication and inspection. Thanks to its 35 mm nominal diameter and the uniform contour of the Standard variant, the tool reduces guesswork during template-based marking and alignment. The consistent geometry shortens setup steps, enabling faster transition between tasks while maintaining precision over repeated operations. Streamlined workflow integration in the workshop Designed as a straightforward stencil for optics-related procedures, the item slots into existing marking and checking routines without complex adaptation. The simplified format promotes efficiency when multiple parts require the same reference geometry, and the clearly defined diameter assists inventory and process planning. Where quick identification matters, the compact designation and SKU simplify ordering and stock management for production planners. Sourcing clarity and dependable supply through Metav Procured via Metav Werkzeuge, the product benefits from a clear supply channel and the European distribution hub in Emmerich that acts as a quality filter for workshop goods. Metav’s broad assortment and logistic reach support stable provisioning of standard items such as this Peak stencil, helping to reduce procurement complexity and keep routine operations uninterrupted. Contact Metav Werkzeuge for availability and expert guidance on the Peak Standard Ø35 mm template — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.181 Type: Standard Manufacturer: Peak Designation: Standard, Ø35mm Category: Optik Measurements Diameter: 35 mm Special features Standard version Intended for optical applications FAQ What diameter does this stencil provide? The stencil is specified with a 35 mm diameter and is listed under SKU MS905.181 as the Standard Ø35 mm variant. What applications suit this template? The template is intended for optical workshop tasks where a consistent reference shape is required for marking, alignment or layout procedures. Is the material specified for the template? Material information is not provided in the available data for MS905.181; the Peak template is identified by type and diameter only. Are other sizes or variants available for the same series? This entry describes the Standard Ø35 mm configuration (MS905.181); alternative sizes or formats may exist within the manufacturer’s range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
39x24x22 20x Folding Loupe With Chromatic Correction, Ø7 Field - Peak
Take advantage of the combination of precise 20× magnification, chromatic lens correction and a compact folding design for reliable close-up inspection and secure storage; order directly via Metav Werkzeuge or consult the specialists for application advice. Peak Folding Magnifier — round inspection loupe with chromatic correction, 20× The Peak Folding Magnifier is a compact, round inspection loupe designed for detailed visual checks and repair work; its chromatically corrected lens supports sharp, colour-accurate magnification in workshop and quality-control environments. Compact folding design for safe storage 20× magnification for fine detail Chromatically corrected lens for sharp colour Ø7 mm field of view for close inspection Sharp, measurable visual inspection for fine work The instrument delivers a controlled view of small parts thanks to its 20× magnification and a chromatically corrected glass element that reduces colour fringing. For assembly, soldering or jewellery inspection, the corrected lens improves edge definition and colour fidelity so contrasts are easier to evaluate. The Ø7 mm field of view provides a focused inspection window that helps identify burrs, hairline cracks or print defects without unnecessary distraction from surrounding detail. This technical clarity speeds decision-making and supports consistent quality checks. Practical design that keeps optics protected and ready A folding mechanism protects the lens when not in use and keeps the loupe compact for transport or pocket storage. The listed dimensions — 39 x 24 x 22 — reflect a design optimised for accessibility at the bench and in mobile inspection kits. Lightweight and unobtrusive, the loupe folds flat to prevent accidental scratching and simplifies handling during repetitive checks. The round housing and robust hinge ensure the optical axis remains stable during quick inspections, maintaining repeatable results on routine measurements. Built for dependable routine use in workshops and labs Manufactured for inspection tasks, the loupe balances optical quality with straightforward operation. The chromatic correction and solid optical performance support trustworthy visual assessment, enhancing process reliability in production and repair settings. The model is identified as MS905.206, making it simple to reference in procurement and inventory systems. Combined with Metav’s track record as a precision partner, this loupe is suitable as a pragmatic tool for technicians, quality engineers and hobby specialists who require repeatable, accurate visual checks. Contact Metav Werkzeuge for tailored advice and prompt supply of the Peak Folding Magnifier MS905.206 — expert guidance and reliable delivery from Emmerich to the workshop. Technical data Article number: MS905.206 Model designation: Peak Folding Magnifier Lens: with chromatic correction Shape: round Facts Magnification: 20× Field of view: Ø7 mm Dimensions: 39 x 24 x 22 Features Folding design for protection and portability Round inspection loupe, 20× Category: Optics Brand: Peak FAQ What level of magnification does the loupe provide? The loupe provides 20× magnification, suitable for detailed inspection of small components and fine work. Is the image colour-accurate with this magnifier? Yes, the chromatically corrected lens reduces colour fringing, so the Peak Folding Magnifier yields sharper, more colour-accurate images for reliable visual assessment. Which field of view can be expected during inspection? The loupe offers a focused inspection window with a Ø7 mm field of view, designed for concentrated examination of small areas. How is the loupe identified for ordering or stock lists? This product is listed as MS905.206 and marketed under the Peak brand, which simplifies catalogue references and procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
39x24x22 Foldable Loupe 7x, Ø16 Field With Chromatic Correction - Peak
Take advantage of 7x magnification and chromatic correction in a compact, folding inspection loupe for reliable visual checks; its Ø16 mm field of view and small footprint make it suitable for tight workspaces and routine quality control. Order the Peak folding loupe directly via Metav Werkzeuge or consult our technical team if further clarification is needed. Peak folding loupe MS905.200 — 7x magnification with chromatic correction Peak folding loupe MS905.200 is a compact inspection tool designed for precise visual inspection in jewellery, electronics and small-part quality control 7x magnification for detailed inspection Chromatic correction for true-colour imaging Ø16 mm field of view for focused observation Compact folding design for safe storage Clear visual inspection with measurable benefits This inspection loupe offers 7x magnification, allowing operators to spot fine defects, solder joints or engraving details without resorting to bulky equipment. The magnification level reduces inspection time and supports faster decision-making on the shop floor, contributing to improved throughput and fewer quality hold-ups. Because the lens includes chromatic correction, colour rendition is more accurate than with simple single-element lenses, which helps to avoid misinterpretation of surface conditions or material finishes. Optics engineered for consistent results The optical construction, featuring chromatic correction, minimises colour fringing and enhances edge clarity across the small viewing area. The result is a sharper image with fewer visual artefacts, which is particularly valuable during repeat inspections or when documenting defects. The defined Ø16 mm field of view provides a predictable inspection window, simplifying measurement and comparison tasks and supporting consistent quality assessments across multiple parts. Compact design that supports workshop workflow A folding housing protects the lens when not in use and keeps the instrument pocketable for technicians who move between benches. The compact external dimensions ensure the loupe is unobtrusive in a busy environment while remaining immediately available for spot checks. This ease of handling reduces downtime caused by fetching specialised equipment and encourages regular inspections, fostering better process control and fewer downstream surprises. Practical applications and suitability Well suited to applications such as watch and jewellery inspection, printed circuit board checks, and fine mechanical assembly, this loupe enables high-resolution visual checks without complicating the workflow. The robust, simple design supports everyday use in workshops and small production lines where clear visual verification is essential. For buyers seeking a lightweight, portable optical aid that balances image quality with practicality, this model provides an efficient solution. For procurement or technical advice on the Peak folding loupe, contact Metav Werkzeuge GmbH in Emmerich — the Metav team can advise on suitability for specific inspection routines and arrange next steps via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS905.200 Brand: Peak Product name: Peak folding loupe Magnification: 7x Field of view: Ø16 mm Dimensions: 39 x 24 x 22 mm Lens: with chromatic correction Shape: round Design: folding loupe Image asset: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/fe/10/d0/67/67d010fe2285a7cc9c2fed1f/MS905200-main.jpg FAQ What magnification does the loupe offer? The loupe provides 7x magnification, suitable for detailed inspection tasks such as jewellery, PCB and fine mechanical checks. How does the chromatic correction improve inspection? Chromatic correction reduces colour fringing and improves edge clarity, meaning inspections with the Peak folding loupe produce more accurate visual assessments and fewer false positives. Is the viewing area large enough for component inspection? The defined Ø16 mm field of view gives a compact but consistent inspection window that suits small components and focused quality checks. Can the loupe be carried on the bench without risk to the lens? Yes — the folding design protects the lens when not in use and keeps the instrument compact for safe transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
39x24x22 Folding Loupe 14x With Chromatic Correction, Ø12 View Field - Peak
Take advantage of precise 14× magnification, chromatic correction and a compact folding design to inspect fine details with confidence; order the loupe directly via Metav Werkzeuge or consult their specialists for tailored advice. Peak folding loupe MS905.204 — 14× magnification, chromatic correction A compact Peak folding loupe designed for close inspection tasks in workshops and quality control, combining high magnification with chromatic correction for sharper, more reliable observations. Folding design for safe transport 14× high magnification Chromatic correction lens Field of view Ø12 mm Clearer edges and reduced colour fringing for accurate inspection The lens is equipped with chromatic correction, which reduces colour fringing at high magnification and results in a noticeably sharper image of edges and fine structures. This optical refinement translates into fewer misreads during visual inspection and faster decision-making in quality control workflows. The corrected optics make the device particularly suitable where precise edge definition matters. Portable precision that fits the bench or pocket Thanks to its compact folding design and small footprint, the magnifier is easy to carry between job sites and to store safely when not in use. The folded profile protects the optics from dust and abrasion, while the lightweight construction keeps handling comfortable during repeated inspections. This mobility supports flexible working patterns in laboratories, workshops and on-site diagnostics. High magnification with a usable viewing window The 14× magnification delivers a significant enlargement for detailed work, while the Ø12 mm field of view provides a practical balance between detail and context. This combination enables inspection of tiny features without losing sight of surrounding structures, which is valuable for tasks such as component checks, soldering inspection, textile inspection and stamp verification. Practical choice for reliable everyday inspection The loupe is a straightforward optical aid that complements measuring instruments and microscopes by offering instant, hands-on visual assessment. As a compact inspection tool, it supports quick quality checks and routine controls where high-resolution imaging or digital documentation are not required. The simple design keeps maintenance minimal and ensures a dependable, long service life when stored and handled correctly. Select the Peak folding loupe for dependable 14× inspection and contact Metav Werkzeuge for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS905.204 Name: Peak folding loupe Manufacturer: Peak Facts Magnification: 14× Field of view: Ø12 Dimensions: 39x24x22 Special features Lens: with chromatic correction Shape: round Category: Optik Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/fe/10/d0/67/67d010fe2285a7cc9c2fed1f/MS905200-main.jpg FAQ What magnification does the loupe provide? The Peak folding loupe MS905.204 offers 14× magnification, suitable for detailed visual inspection of small components and markings. Does the lens include chromatic correction? Yes, the optical design of this loupe includes chromatic correction, which reduces colour fringing and improves edge clarity during close inspection. Is the loupe suitable for mobile or field use? The folding design and compact dimensions make the magnifier well suited for mobile inspection; the compact folding construction protects the optics during transport. What is the visible field when using the loupe? The viewing aperture provides a Ø12 mm field of view, offering a focused window that balances enlargement with situational awareness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm/400mm LED Task Lamp 117 LEDs 24W Dimmable Clamp Mount 600Lm 6000–7000K 220–240V - Metav IndustryLine
Take advantage of adjustable, clamp-mounted illumination and a dual 400 mm articulated arm for precise positioning; combined with an extended service life this lamp supports steady inspection and assembly workflows. Order the unit directly via Metav Werkzeuge or consult the Metav team for application advice. M503.167 LED task lamp — articulated inspection light with table clamp and adjustable reach The M503.167 LED task lamp is a dimmable, clamp-mounted work light designed for inspection, optics and fine assembly tasks where precise, shadow‑free illumination and stable mounting are essential Dimmable LED lighting for controlled illumination Articulated 400+400 mm arm for accurate positioning Table clamp mounting for secure attachment Long service life approx. 20,000 h Precision illumination for inspection and optics work An efficient LED module provides a steady, flicker‑free beam that supports visual inspection and assembly tasks with consistent contrast. The dimmable function helps match light output to delicate operations and prevents glare during close‑up work; it also reduces eye strain over long shifts. With a colour temperature of 6000–7000 K, the light sits in a neutral cool white range that aids colour differentiation and sharp detail recognition, making it suitable for optics, electronics inspection and precision assembly. Flexible positioning that shortens set‑up time The lamp's 400 mm + 400 mm articulated arm offers extended reach and micro‑adjustability without losing rigidity. The combination of two articulated segments and an overall compact layout enables rapid alignment over benches, microscopes or measuring stations while keeping the illuminated area consistently directed. The table clamp mounting secures the light to workbenches without consuming bench surface area, supporting quick re‑positioning between jobs and improving process flow on the shop floor. Robust design for continuous workshop use Built for industrial use, this task light balances sturdiness with manoeuvrability. The construction and a notable mass give the assembly a stable feel when clamped, reducing vibration during fine tasks. Rated for an expected service life of around 20,000 h, the unit minimises maintenance intervals and replacement cycles, delivering reliable uptime for repetitive inspection or assembly operations. The product is part of the Metav IndustryLine range and is specified to meet everyday workshop demands. Safe compatibility and simple integration Designed for standard mains environments, the lamp operates on 220–240 V / 50 Hz, ensuring straightforward connection across European workshops. The dimming control and clamp attachment allow integration into existing workstations without special fixtures. The compact overall length and articulated reach make the light adaptable to benches, inspection rigs and optical tables, while the neutral white light aids camera‑based inspection systems and visual quality control. For a tailored recommendation on Metav IndustryLine clamp‑mounted lighting and to confirm suitability for specific inspection tasks, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 — our advisers will assist with selection and delivery. Technical data Article number: M503.167 GTIN: 4054469164601 Category: Optik ECLASS: 27110640 Label: Arbeitsleuchte (LED), 117LEDs/24W, Tischklemmung, dimmbar Gelenke/Arm 400mm/400mm, 100 - 240 V Facts Arm length: 400 + 400 mm Overall length: 500 mm Weight: 6.6 kg Voltage: 220–240 V / 50 Hz Lifespan: approx. 20,000 h Colour temperature: 6000–7000 K Tariff number: 94054099900 Special features Table clamp mounting Dimmable LED Brand: Metav IndustryLine SKU: M503.167 Category path: Optik FAQ Is the lamp suitable for optical inspection work? Yes. The neutral 6000–7000 K colour temperature and dimmable LED make the lamp well suited for optics and inspection tasks requiring accurate colour rendition and contrast. Can the lamp be mounted on any bench? The table clamp provides firm attachment to most benches and work surfaces; the articulated 400 + 400 mm arm allows flexible positioning over microscopes and measuring instruments. What is the expected service life of the LED module? The lamp is specified with an expected service life of approximately 20,000 h, supporting long operational periods between replacements. Does the unit run on standard European mains supply? Yes. The device is compatible with 220–240 V / 50 Hz mains power, enabling immediate use in typical European workshops. Which Metav range does this product belong to? This product is part of the Metav IndustryLine range and is supplied with full Metav distribution and logistics support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42mm×52mm Zoom Loupe 10–20x with Reticle and Template, 0.1mm Resolution - Peak
Take advantage of precise visual inspection and simple measurement in one compact tool: a variable 10–20× magnification enables detailed examination while the integrated reticle and template speed up routine checks. The clear 0–12 mm measurement range with 0.1 mm scaling supports repeatable results in production and quality control. Order the Peak Zoom Loupe directly via Metav Werkzeuge or consult our specialists for application advice. Peak Zoom Loupe MS905.198 — 10–20× inspection loupe with reticle The Peak Zoom Loupe MS905.198 is a variable-magnification inspection loupe designed for precise component inspection and small-part measurement in workshops, laboratories and quality-control stations. Variable magnification 10–20× for detailed inspection Built-in reticle and template for quick measurements Dioptre adjustment −3.5D to +5D for personal focus Compact Ø42×52 mm housing for tight spaces Accurate measurement where it matters The combination of 10–20× zoom and a defined 0–12 mm measuring range makes this optical magnifier suitable for fine measurements and defect detection. The integrated reticle and template convert visual inspection into quantifiable checks, while the 0.1 mm scale provides a clear, comparable value for repetitive tasks. This approach reduces inspection time and supports consistent quality documentation in production workflows. Comfortable focusing and clear field of view A broad dioptre adjustment from −3.5D to +5D allows individual focusing without external lenses, which keeps operations fast and ergonomic for technicians and inspectors. The compact body (Ø42×52 mm) and the specified field of view Ø13–7 mm ensure an efficient working distance and a practical balance between magnification and working comfort. The variable zoom reduces the need to swap optics, improving throughput during assembly or repair work. Compact design for bench and mobile inspections Small footprint and robust optics make the loupe well suited to bench inspection, electronics assembly and watchmaking tasks. The supplied template and etched reticle speed up go/no-go checks and visual gauging, turning the loupe into a versatile handheld inspection instrument. Its construction supports frequent handling and quick placement over components, which helps maintain cycle times on the shop floor. Professional supply and market trust Metav combines decades of measurement know-how with a broad range of workshop solutions, delivering reliable supply and a single-source approach for precision tools. With a large, established customer base and central logistics from Emmerich, Metav ensures consistent availability and helps reduce procurement complexity for industry and craft. The straightforward product pairing of optical performance and practical measuring aids aligns with modern quality routines. Contact Metav Werkzeuge for tailored advice on the Peak Zoom Loupe MS905.198 and availability from Emmerich—technical consultants are ready to recommend the optimal inspection setup for specific applications Technical data Article number: MS905.198 Product name: Peak Zoom Loupe Brand: Peak Includes: reticle and template Facts Magnification: 10–20× Measurement range: 0–12 mm Scale: 0.1 mm Dioptre adjustment: −3.5D to +5D Dimensions: Ø42×52 mm Field of view: Ø13–7 mm Special features With reticle and template Variable zoom for flexible inspection Compact housing for limited spaces Suitable for fine inspection and small measurements FAQ What magnification range does the loupe offer? The Peak Zoom Loupe MS905.198 provides a variable magnification range of 10–20×, allowing close examination of small features and fast switching between detail levels. Which measurement range and precision are available? Visual checks and simple measurements are supported across 0–12 mm with an indicated 0.1 mm scale, enabling repeatable comparisons and quick gauging. Can the loupe be adjusted for individual eyesight? Yes; the optical unit includes a dioptre adjustment from −3.5D to +5D, permitting personal focus compensation without additional corrective lenses. What is supplied with the loupe to assist measurement? The instrument is supplied with an etched reticle and a matching template, converting visual inspection into immediate go/no-go and dimensional checks. Which applications suit this inspection loupe best? The loupe is ideal for electronics inspection, watch and jewellery work, fine mechanical assembly and any task requiring detailed visual assessment and quick dimensional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46x49x39 8x Loupe With Engraved Scale On Base, 24x36 Field - Peak
Take advantage of the achromatic lens and 8× magnification for accurate, colour-faithful inspection of film and small parts; the engraved scale on the base adds quick measuring capability. Order via Metav Werkzeuge or consult our specialists for application advice. Peak Lupe — 8× inspection loupe with achromatic optics The Peak Lupe is a compact inspection loupe with an achromatic lens, optimised for inspecting photographic negatives, film and fine-detail work in photography and hobbyist metrology. Achromatic lens for true-colour viewing 8× magnification for fine-detail inspection Scale engraved on the base for quick measuring Compact dimensions 46 × 49 × 39 mm High-precision optics for clearer inspection results The combination of an achromatic lens and moderate 8× magnification delivers sharper, more colour-accurate images than a simple single-element lens. Chromatic aberration is reduced, which means edges and tonal transitions appear cleaner — a tangible benefit when evaluating photographic negatives or assessing surface detail. The loupe’s 24 × 36 mm field of view matches standard 35 mm frames, enabling efficient scanning of the entire negative without constant repositioning. This results in faster quality checks and fewer re-inspections, improving inspection throughput in small workshops and studios. Compact format that supports efficient workflow With a footprint of 46 × 49 × 39 mm, the loupe occupies minimal bench space while remaining stable during use. The compact format makes handling straightforward and keeps the instrument close at hand for frequent inspection tasks, reducing task cycle time. The scale engraved on the base provides an immediate reference for measuring features or comparing image detail without the need for additional tools, which streamlines processes where quick dimensional checks are useful. The overall design supports repeatable inspection routines and a tidier workstation. Practical applications and compatibility with visual inspection tasks This loupe is particularly suited to analogue photography workflows, archival inspection of film, philately, jewellery examination and component inspection where moderate magnification and true-colour rendering are priorities. The achromatic optics help to reveal defects, dust and grain more reliably than simple lenses, while the 8× magnification balances enlargement with ease of use — larger magnifications can reduce depth of field and slow inspection. The loupe’s specification and engraved scale make it a pragmatic choice for tasks that require rapid, visually accurate decisions rather than metrological certification. For hands-on advice or to match this loupe to a specific workflow, contact Metav Werkzeuge — our consultants will recommend the ideal configuration and supply options based on the inspection requirements. Technical data Article number: MS905.290 Brand: Peak Product name: Peak Lupe 8× Lens type: achromatic Numbers / Core technical data Magnification: 8× Field of view: 24 × 36 mm Dimensions: 46 × 49 × 39 mm Designs / Special features Scale engraved on the base Suitable for photographic negatives Compact inspection loupe FAQ What magnification does the loupe provide? The loupe offers 8× magnification, which is suitable for fine-detail inspection without excessive loss of depth of field. Does the lens correct colour fringing? Yes, the loupe uses an achromatic lens that reduces chromatic aberration and improves colour-faithful viewing for film and small parts. What is the field of view and why does it matter? The loupe provides a 24 × 36 mm field of view, matching standard 35 mm negatives so that frames can be viewed with minimal repositioning. Is the loupe suitable for measuring small features? The scale engraved on the base allows for quick, informal measurements and size comparisons during visual inspection. Which tasks is this loupe best for? Typical uses include inspection of photographic negatives, film appraisal, stamp and jewellery checks, and general visual quality control in small workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4x Peak Eyeloupe With Anti-Fog Vent, Aluminium - Peak
Take advantage of the combination of 4x magnification, a lightweight aluminium housing and a vented tube that prevents lens fogging for reliable, uninterrupted inspection of small components; order the inspection loupe directly via Metav Werkzeuge or consult our advisors for technical details. Peak loupe A16D – 4x inspection loupe with aluminium housing Peak loupe A16D is a compact inspection loupe designed for close visual work in workshops and inspection benches, ideal where steady magnification and clear optics are required 4× magnification for fine inspection Lightweight aluminium housing Vent in tube prevents lens fogging Accurate visual inspection with compact magnification The 4× magnification delivers a practical balance between field of view and detail, making the loupe particularly suited to tasks requiring steady scrutiny rather than extreme enlargement. A single, controlled power simplifies visual workflow: at this level of magnification, small defects and fine markings become clearly visible without excessive eye strain. This makes the device an efficient choice for repeat inspection routines, reducing inspection time while improving detection of imperfections. Robust, workshop-ready design that supports productivity Constructed with an aluminium housing, the loupe combines lightweight handling with durable resilience against routine wear. The metal body provides a stable handheld feel and resists corrosion in busy shop environments, supporting frequent use in watches, jewellery and small-component inspection. The compact design enhances portability between workstations and contributes to a streamlined inspection process that fits into existing quality-control workflows. Continuous clarity for uninterrupted work A small vent in the tube prevents the lens from fogging during temperature changes or high-humidity conditions, ensuring anti-fog performance without extra accessories. Clear optics and a dependable housing minimise downtime from cleaning or repositioning, which supports more consistent throughput during assembly or repair tasks. For precision applications such as watch servicing or jewellery appraisal, the combination of steady magnification and an anti-fog feature helps maintain concentration and accuracy over longer inspection periods. Contact Metav Werkzeuge for precise technical advice or to request availability information; their specialists can advise on integration into workshop processes and delivery from the Emmerich warehouse. Technical Data Article number: MS905.391 Type: A16D Brand: Peak Category: Optics Core specifications Magnification: 4x Lens: 1x Material: Aluminium Special features Small vent hole in tube prevents lens fogging Lightweight, corrosion-resistant aluminium housing Suited to inspection of watches and jewellery FAQ Is the magnification suitable for watch repair and detailed jewellery work? The Peak loupe A16D offers 4x magnification, which is well suited to routine watch repair and jewellery inspection where clear detail and a usable field of view are required. What is the housing made from and how does that affect daily use? The loupe is made from aluminium, providing a lightweight but durable casing that withstands regular handling in workshop conditions. How is lens fogging prevented during inspections? A small vent in the tube of the loupe prevents lens fogging, enabling longer periods of uninterrupted inspection without the need for additional anti-fog treatments. Can this loupe be used alongside precision calipers for measurement verification? Yes, the loupe is suitable for close visual tasks on small products such as watches and jewellery and can be used in conjunction with precision calipers for visual verification during measurement tasks. Which model and SKU should be referenced when ordering or enquiring? Refer to the Peak loupe A16D, SKU MS905.391, when requesting specifications or availability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 Diopter 127mm Magnifier With LED Stand 2.25×, Dimmable 650 lm 10W, Glass Lens - Metav IndustryLine
Take advantage of a clear view and dependable illumination thanks to a 127 mm glass lens and a dimmable 650 lm LED array; the stable 300×200 mm base and dual articulated arms ensure repeatable inspection conditions. Order the LED Work Magnifier M503.165 directly via Metav Werkzeuge or ask our consultants if needed. LED Work Magnifier M503.165 — 127 mm glass lens, 5 dioptre (Metav IndustryLine) The LED Work Magnifier M503.165 is a bench-mounted inspection lamp designed for precise visual work in workshops, laboratories and quality control stations. Large 127 mm glass lens for clear viewing 5 dioptre magnification (2.25×) for fine detail Dimmable 650 lm LED with 56 SMD diodes Stable 300×200 mm base, mains powered 220–240 V Precision optics for reliable inspection The magnifying head combines a 127 mm glass lens with a 5 dioptre optical strength to deliver a 2.25× enlargement that is well suited to tasks requiring close visual scrutiny. A larger lens diameter not only increases the usable field of view but also reduces the need for constant head repositioning, which in turn improves throughput and lowers the risk of inspection errors. The use of glass for the lens preserves optical clarity over time and resists scratching compared with many plastics, supporting consistent measurement and assembly work. Comfortable, glare-free illumination for detailed tasks Lighting is provided by 56 SMD LEDs producing 650 lm of useful light while consuming 10 W, giving a balance of brightness and energy efficiency. The lamp is dimmable, enabling the illumination level to be matched to the task and to personal comfort, which helps to reduce eye strain during prolonged use. With an expected service life of around 20,000 h, the LED array delivers long-term stability of colour temperature and brightness, reducing maintenance interruptions and ensuring consistent visual conditions for quality assurance processes. Robust bench support for stable measurements A broad 300×200 mm base and a substantial overall mass (approx. 6.6 kg) give the assembly excellent resistance to movement, making it suitable for fixed bench stations where repeatable positioning is required. The dual-arm configuration (300 + 300 mm reach) allows precise placement and easy retraction when space is needed. Mains operation at 220–240 V / 50 Hz removes the need for batteries and provides continuous, reliable power for uninterrupted inspection or assembly cycles. Boosting efficiency across applications This magnifying lamp is engineered for a range of uses from electronic assembly and solder inspection to jewellery making and component assembly. The combination of a wide glass lens, dimmable LED lighting and stable mounting supports faster visual checks with fewer reworks, contributing to a measurable improvement in line efficiency. As a Metav IndustryLine product, the unit fits into a wider supply chain strategy that prioritises reliable sourcing and consistent quality, helping shops and production teams to maintain steady throughput without compromising precision. For precise, consistently lit inspection at the workbench, choose the Metav IndustryLine LED Work Magnifier M503.165 from Metav Werkzeuge — contact Metav Werkzeuge for purchasing advice or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M503.165 GTIN: 4054469144719 ECLASS: 21170614 Tariff code: 90138090 Facts Lens diameter: 127 mm (5") Magnification factor: 2.25× Dioptre: 5 Luminous flux: 650 lm Power consumption: 10 W Lamp life: approx. 20,000 h Weight: 6.6 kg Arm reach: 300 + 300 mm Base dimensions: 300 × 200 mm Supply voltage: 220–240 V, 50 Hz LEDs: 56 SMD Special features Lens material: glass Dimmable LED lighting Stable bench base Mains powered Brand: Metav IndustryLine SKU: M503.165 FAQ What magnification does this magnifier provide? The lamp offers a 5 dioptre lens giving approximately 2.25× magnification, suitable for close visual inspection and detailed assembly work. Is the illumination adjustable to different tasks? Yes — the unit features a dimmable LED array with 56 SMD diodes and an output of 650 lm, allowing the light level to be set for precision inspection or more relaxed assembly tasks. What material is the lens made from? The magnifying element is made of glass, chosen for optical clarity and resistance to long-term abrasion compared with many plastics. Which environments and tasks is this magnifier designed for? The M503.165 is intended for bench use in electronics, watchmaking, jewellery, quality control and similar tasks where stable illumination and precise visual inspection are required. Does the product require batteries or external power? The magnifier is mains powered and operates at 220–240 V / 50 Hz, providing continuous operation without battery changes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Hand Magnifier 6x With Light, 6 Dioptre - Metav IndustryLine
Compact bright inspection with a wide 50 mm lens and 6× magnification ensures precise visual checks even in poor light; the integrated illumination and lightweight design support extended handheld use. Order the hand loupe directly via Metav Werkzeuge or consult our advisors for application guidance and fast delivery. Hand Loupe M503.146 – 50 mm, 6× magnification with illumination (Metav IndustryLine) The Hand Loupe M503.146 is an illuminated handheld magnifier designed for detailed inspection tasks in workshops, jewellery making and quality control applications. 50 mm lens for a wide field of view 6× magnification for detailed inspection Built-in illumination for low-light work Lightweight design at 200 g Precise inspection performance that speeds up decision-making The combination of a 50 mm lens and 6× magnification delivers a noticeably larger field of view than smaller loupes while keeping detail sharp, making surface inspections and solder-joint checks faster and more reliable. The dioptre 6 specification corresponds to the magnification power and is particularly effective for reading fine engravings, circuit traces and textile fibres; as a result, visual quality-control steps can be completed with fewer re-checks, reducing inspection time and downstream rejects. Emphasis on optical clarity supports an efficient workflow in production and bench-level quality assurance. Practical illumination and ergonomics for everyday use An integrated light source illuminates workpieces evenly, removing shadows that can obscure tiny defects. Because the lamp is built into the frame, manual handling is simplified and the focus remains on the component rather than external lights. The loupe operates on 2× mono batteries (not included), keeping the tool cordless and portable for quick spot checks across the shop floor. At around 200 g, the handheld unit balances sturdiness with comfort, allowing extended use without undue fatigue and maintaining steadiness for repeatable visual assessments. Suitable applications and added confidence for professionals The device is well suited to close visual tasks in mechanical workshops, watchmaking, jewellery, electronics assembly and inspection benches where controlled lighting and a wide viewing area matter. The lightweight, ergonomic body makes it practical for mobile inspection rounds and bench work alike. Paired with Metav’s reputation as a precision partner, the loupe contributes to consistent measurement and inspection routines — an asset for teams aiming to standardise visual controls and documentable quality steps. Choose the Metav IndustryLine M503.146 for reliable, illuminated inspection — contact Metav Werkzeuge in Emmerich for tailored advice and dependable supply Technical data Article number: M503.146 GTIN: 4054469144672 ECLASS: 21170614 Customs tariff number: 90138090 Brand: Metav IndustryLine Facts Lens diameter: Ø50 mm Magnification: 6× (dioptre 6) Weight: 0.2 kg Battery: 2× Mono (not included) Special features Integrated illumination Lightweight handheld design Category: Optik Story trigger: optik FAQ Which batteries are required and are they included? The loupe requires 2× mono batteries; batteries are not included with the Metav IndustryLine M503.146. Is this magnifier suitable for jewellery and watchmaking? Yes, the 6× magnification and 50 mm lens make the loupe suitable for jewellery and watchmaking inspection where a wide, clear field is advantageous. Can the built-in light be used for extended inspections? The integrated illumination is intended for prolonged handheld use; its cordless design using 2× mono batteries supports mobile inspection rounds. What advantages does the 50 mm lens offer compared with smaller lenses? A 50 mm lens provides a wider field of view while preserving magnification detail, enabling faster visual checks and fewer repositionings during inspection. Is the loupe part of a certified measuring system? The product is an optical inspection tool from Metav IndustryLine designed for visual assessment tasks; specific calibration certificates are not applicable to this handheld loupe. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x Peak Standard Template Typ 13 - Peak
Take advantage of a compact optical reference that supports repeatable inspections at 50x magnification and simplifies routine visual checks; order directly via Metav Werkzeuge or consult our specialists for specification matching. Peak Standard Template Type 13 — optical standard template, 50x magnification The Peak Standard Template Type 13 is an optical reference intended for routine visual inspection and comparative measurement tasks at 50x magnification, suitable for inspection benches and laboratory checks. Peak optical standard for repeatable inspections Designed for 50x magnification verification Compact format for bench and laboratory use Consistent reference for reliable inspection results The template provides a clear, stable pattern that supports accuracy and repeatability in visual checks at 50x magnification. As an optical reference, it reduces ambiguity when comparing sample features under magnification and helps maintain consistent inspection criteria across shifts. The result is fewer retests and a more reliable quality-control protocol without introducing complex calibration steps. Fits into existing inspection workflows with minimal effort Designed as a straightforward reference plate, the template streamlines routine examinations and aids quick decision-making during visual inspection. The clear marking at the specified magnification simplifies pass/fail assessments and cuts down inspection time through immediate visual confirmation. This practical approach supports efficient shop-floor or laboratory processes while preserving the integrity of quality checks. Suitable for laboratories, workshops and training environments The compact design and defined magnification make the template a useful tool for microscopy labs, optical workshops and vocational training settings that require a dependable comparison standard. Peak’s Type 13 standard is handy when documenting inspection results or teaching visual evaluation techniques, offering a consistent visual baseline that supports traceable procedures and internal quality guidelines. For precise advice on integrating the Peak Type 13 into existing inspection routines or to request product details, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and local supply options Technical data Article number: MS905.244 Name: Peak Standard Template Type 13 Facts Magnification: 50x Special features Brand: Peak Type: Type 13 Application: optical reference for inspections FAQ What magnification is the template intended for? The template is specified for 50x magnification, making it suitable for visual inspection tasks that require that level of enlargement with the Peak Standard Template Type 13 (SKU MS905.244). Can the template be used in production quality control? Yes, the template serves as an optical reference for routine production checks; the Peak Type 13 supports consistent visual comparisons and helps standardise inspection criteria. Is the template suitable for training purposes? The defined pattern at 50x makes the template well suited to teaching visual evaluation and inspection techniques in laboratories and vocational training environments. Which environments benefit most from this reference template? Microscopy labs, optical workshops and bench inspection stations benefit from the stable visual baseline provided by the Peak Standard Template Type 13, improving comparability of inspection outcomes. How is repeatability supported by this product? By offering a standardised optical pattern at 50x magnification, the template reduces subjective variance in visual assessments and promotes repeatable inspection decisions across operators. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x Template Type 14, Optical Inspection - Peak
Take advantage of 50x magnification and the compact Type 14 format for faster, more reliable visual inspection; order the stencil directly via Metav Werkzeuge or consult the Metav experts for technical guidance. Peak Stencil (Type 14) — optical inspection template with 50x magnification A Peak stencil (Type 14) for precise optical comparison and pattern inspection, optimised for bench-top visual checks and microscope-assisted evaluation in quality control. 50x magnification for detailed inspection Type 14 template for geometric comparison Compact format for bench-top use Clear markings for rapid visual assessment Accurate visual assessment with high magnification The 50x magnification enables detailed inspection of fine features that are difficult to resolve by eye, supporting reliable pass/fail decisions during incoming inspection and routine quality checks. The magnification level reduces interpretation ambiguity, so small defects, edge conditions and pattern deviations become visible and comparable against the template. This focus on measurable visual data improves process control and helps maintain consistent production quality. Engineered for optical comparison and microscope use Designed as a dedicated optical template, the Type 14 format integrates with common bench microscopes and optical comparators for straightforward alignment and repeatable checks. The template's geometry simplifies reference positioning and visual overlay, which speeds up inspection cycles. For technicians conducting frequent visual tests, the template offers a pragmatic way to transfer microscopic detail into actionable inspection outcomes with minimal setup time. Streamlined inspection workflow on the shop floor As a compact inspection aid, the stencil supports rapid go/no-go decisions at the workstation, lowering cycle time for routine checks and reducing the need for complex measuring equipment for certain visual criteria. The clear reference patterns cut down on interpretation time and help maintain throughput without sacrificing scrutiny. Used in combination with standard optical aids, the template contributes to a more efficient quality assurance routine and fewer downstream reworks. Practical handling and integration into quality systems The template’s straightforward function makes it easy to adopt into established inspection procedures and documentation routines. Its visual nature complements quantitative measurement tools, providing an immediate cross-check that can highlight anomalies before further processing. For teams managing traceability and inspection records, the template serves as a simple, effective instrument to support consistent visual verification alongside calibrated measuring devices. For precise optical checks with the Peak Type 14 stencil, contact Metav Werkzeuge for personalised procurement and technical advice from Emmerich — Metav’s specialists will assist with selection and delivery. Technical Data Article number: MS905.246 Brand: Peak Designation: Peak stencil Type: Type 14 Facts Magnification: 50x Category: Optics SKU: MS905.246 Special features Optical inspection template Designed for bench-top use Clear pattern markings Compatible with microscope-assisted comparison FAQ What level of detail is visible with the template? The Peak stencil (Type 14) at 50x magnification reveals fine features and edge details suitable for optical comparison and helps identify deviations not visible to the naked eye. Can this template be used with standard microscopes? Yes, the template is intended for microscope-assisted inspection and optical comparators, offering straightforward alignment for repeatable visual checks. Is the stencil suitable for incoming inspection tasks? The stencil supports rapid visual acceptance and rejection criteria during incoming inspection, complementing dimensional measurement methods in a quality workflow. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x50 3x Folding Thread Counter With Engraved Mm Scale, Rectangular, Aluminium - Peak
Introducing the Peak Folding Magnifier — Rectangular Folding Magnifier, 3x The Peak Folding Magnifier is a compact rectangular 3x folding magnifier designed for precise inspection and measurement in jewellery, watchmaking, textile work and hobby applications. Compact aluminium body in black 3x magnification with double lens correction 50×50 mm field of view for clear overview Engraved mm scale for quick on-the-spot measurements Exceptional clarity for fine inspection tasks The Peak Folding Magnifier delivers 3x magnification with a double lens design that reduces optical aberrations and produces a sharper image than a single-lens loupe. The generous 50×50 mm field of view allows users to see a broader area without frequent repositioning, which speeds up inspection and reduces eye strain. This combination of magnification and a corrected optical path is particularly valuable when evaluating small parts, stitches or surface details. Robust, portable design built for daily use Constructed from Aluminium with a black finish, the folding frame is both durable and lightweight. Its compact dimensions make the magnifier easy to carry and quick to deploy, while the folding mechanism protects the lenses when stored. The solid build ensures a long service life in workshop and field environments, offering reliable performance for professionals and hobbyists alike. Practical measurement and straightforward handling An engraved mm scale is present on each side of the foot, with the scale length matching the width of the field of view to simplify immediate measurements. For users unfamiliar with optical tools, the double lens setup means fewer adjustment attempts are needed to achieve a sharp image, making measurement tasks faster and more dependable. The straightforward design supports repetitive work where speed and accuracy matter. Recommended care and application tips For consistent results, clean the lenses gently with a soft microfiber cloth and avoid abrasive cleaners that could scratch the optical surfaces. When measuring, align the engraved scale with the object edge within the 50×50 mm viewing area to read dimensions directly. The compact nature of the tool makes it ideal for on-site checks, quality control routines and close visual inspection where a simple, precise solution is required. Highly recommended for professionals and enthusiasts who require precise visual inspection: choose the Peak Folding Magnifier and contact METAV Werkzeuge for expert advice by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271 Technical Information Bezeichnung: Peak Folding Magnifier, rectangular, 3x Marke: Peak SKU: MS905.384 Label: Peak Thread Counter 3x Aluminium, black Lens: x2 (double lens) Magnification: 3x Field of view: 50×50 (mm) Material: Aluminium (black) Besonderheit: with engraved mm scale UID: MS905.384 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What is the best use for the Peak Folding Magnifier from Peak as a folding magnifier? The Peak Folding Magnifier by Peak is ideal for jewellery inspection, watch repair, textile checks and hobby tasks where a compact folding magnifier with 3x magnification and a 50×50 mm field of view speeds up detailed work. How does the double lens benefit users of the Peak Folding Magnifier by Peak? The double lens configuration in the Peak Folding Magnifier reduces optical aberrations and delivers a sharper image than single-lens alternatives, which makes fine-detail inspection and measurements easier and more reliable. Can I measure small parts directly with the Peak Folding Magnifier from Peak? Yes, the Peak Folding Magnifier includes an engraved mm scale on each side of the foot; the scale length corresponds to the field of view so measurements can be read directly within the viewing area. Who should consider the Peak Folding Magnifier by Peak? Professionals in watchmaking and jewellery, textile technicians, hobbyists and quality-control personnel will benefit from the Peak Folding Magnifier’s blend of durability, portability and optical precision. Where can I get further technical advice for the Peak Folding Magnifier from Peak? METAV Werkzeuge, the retailer, offers comprehensive and competent advice; contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 for additional technical data or purchasing support
51x51x65 4x Magnifier With Clear And Black Base, Ø45 View Field - Peak
Take advantage of the 4x magnification and the included dual bases to speed up inspection tasks while keeping handling simple; the compact footprint (51 x 51 x 65 mm) makes the loupe easy to position and store. Order the loupe directly via Metav Werkzeuge or consult their advisors for specification checks. Peak Loupe 4x with Base — compact hands‑free inspection magnifier, Ø45 mm field of view The Peak Loupe is a small, hands‑free inspection magnifier intended for close visual checks in workshops and quality control, combining clear 4x magnification with a stable base for repeatable positioning 4x magnification for detailed inspection Ø45 mm field of view for clear overview Transparent and black base included for stability Precision that speeds up inspection The loupe delivers 4x magnification, making small details readable without complex optics. With a Ø45 mm field of view, the lens balances enlargement and workspace coverage so components and prints remain visible in context rather than isolated. The compact footprint of 51 x 51 x 65 mm reduces bench clutter and allows close placement over small assemblies; this supports faster visual decisions and reduces handling time during repetitive checks. Clear numerical values and a steady imaging plane help standardise inspection routines and lower the risk of overlooked defects. Stable base options for reproducible checks Two bases are supplied — a transparent base and a black base — to suit different inspection needs. The transparent base permits light from beneath or angled illumination to pass through, useful when checking thin or translucent parts; the black base increases contrast for reflective or light‑coloured surfaces. Both options improve stable positioning, ensuring the magnifier remains at a consistent working distance so repeat measurements and visual inspections stay comparable across batches. Hands‑free use reduces fatigue and supports focused, accurate work at a steady pace. Integrates easily into workshop workflows The compact, lightweight design makes the device straightforward to deploy at assembly stations, inspection benches or for hobby‑level precision work. Quick swapping of the supplied bases and the absence of complex setup mean less downtime when switching tasks. For specialised applications or integration into established inspection processes, technical specifications and practical advice are available from the supplier; this helps align the tool with existing lighting and handling arrangements and ensures a smooth introduction into daily use. Contact Metav Werkzeuge for tailored advice or to arrange supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability and place an order Technical data Article number: MS905.399 Name: Peak Loupe Brand: Peak Magnification: 4x Field of view: Ø45 mm Dimensions: 51 x 51 x 65 mm (W x D x H) Accessories included: transparent base; black base Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b6/5f/c8/67/67c85fb69bcec1e3dfe7742c/MS905399-main.jpg Facts SKU: MS905.399 Magnification value: 4x Sichtfeld: Ø45 Foot options: transparent and black Special features Compact hands‑free magnifier Dual bases for contrast or light transmission Suitable for fine inspection and assembly tasks Category: Optik FAQ What tasks is this loupe best suited for? The Peak Loupe MS905.399 is suitable for close visual inspection, component checks and light assembly tasks where 4x magnification and a stable working distance improve repeatability. Can the bases be interchanged quickly at the bench? Yes, the delivery includes both a transparent base and a black base; the Peak Loupe is designed for rapid swapping to adapt contrast and lighting conditions without additional tools. How large is the area visible through the lens? The loupe provides a Ø45 mm field of view, offering a balance between magnified detail and sufficient context for practical inspection work. Is the loupe suitable for repetitive quality inspections? The compact design and stable positioning enabled by the supplied bases make the Peak Loupe MS905.399 well suited to repetitive checks where consistent visual conditions are important. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
54mm Peak Measuring Loupe 3x With Template And Stand, Ø58 Field - Peak
Take advantage of the combination of reliable inspection, straightforward measurement and practical accessories to speed up routine quality checks; order the Peak measuring magnifier directly via Metav Werkzeuge or consult our team for specification advice. Peak Measuring Magnifier MS905.328 — 3× magnification, Ø58 mm field of view The Peak Measuring Magnifier MS905.328 is a compact visual inspection instrument designed for precise dimensional checks in workshop and quality-control environments. 3× magnification for clear visual inspection 58 mm field of view for broad overview Scale graduation of 0.1 mm for precise reading Includes template and adjustable stand High-precision measuring where it counts The inspection loupe delivers 3× magnification together with a measuring range of 0–54 mm, enabling precise checks of small components and features without complex equipment. The instrument’s scale graduation (0.1 mm) provides a quantifiable basis for go/no-go decisions; readings can be compared directly to drawing tolerances to avoid rework. For production lines where fast visual confirmation reduces cycle time, this device supports reproducible measurement and lowers the risk of oversight. Improved throughput with a wide viewing area A Ø58 mm field of view means more of the component is visible at once, cutting the need for repeated repositioning during inspections. Supplied with a template and stand, the unit can be set up for repeatable checks and left in position to speed up batch inspections. The combination of a broad viewing area and a stable mounting reduces handling time, enabling staff to maintain a steady workflow while keeping measurement quality consistent. Simple operation reduces training time The loupe’s layout is intentionally straightforward: the scale is easy to read and the measuring range is clearly marked, so interpretation does not demand specialist training. The compact format and clear markings mean operators can be productive quickly, supporting both occasional spot checks and structured quality-control procedures. Where lean processes matter, this simplicity translates into lower operation cost and faster onboarding of new personnel. Robust suitability for workshop environments With practical dimensions of 76 x 105 x 96 mm, the device fits bench-top setups without occupying valuable workspace and can be integrated into existing inspection stations. The included stand provides stability for repeat measurements, while the template enables consistent alignment of parts. These features make the magnifier a pragmatic choice for small series, repair work and incoming inspection — delivering measurable improvement to daily quality routines. Contact Metav Werkzeuge for tailored advice on integrating the Peak measuring magnifier MS905.328 into inspection processes or to request detailed technical data via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: MS905.328 Name: Peak Measuring Magnifier Magnification: 3× Field of view: Ø58 mm Core specifications Measuring range: 0–54 mm Scale graduation: 0.1 mm Dimensions: 76 x 105 x 96 mm Visible field diameter: 58 mm Features & accessories Includes template and stand Category: Optics Scaling: 0.1 FAQ How accurate are the readings with this magnifier? The Peak Measuring Magnifier MS905.328 provides readings with a scale graduation of 0.1 mm and a clear optical view, suitable for standard workshop-level dimensional checks. Can the magnifier be used for repetitive batch inspections? Yes, the supplied stand and template enable repeatable positioning so that routine batch inspections can be carried out efficiently and consistently. What is the effective viewing area for inspection tasks? The loupe offers a 58 mm field of view, allowing larger areas of a component to be inspected at once and reducing the need for frequent part repositioning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5x Hand Magnifier Small Bore Anti-Fog Tubus, Aluminium - Peak
Take advantage of robust aluminium construction and 5x magnification for reliable inspection of small parts; the built-in anti-fog tubus keeps the view clear during precision tasks. Order this inspection loupe directly via Metav Werkzeuge or consult the Metav team for application advice. Peak 5x hand loupe (A20D) — aluminium body, anti-fog tubus Peak 5x hand loupe for precise visual inspection in watchmaking, jewellery work and quality control in small-part assembly 5x magnification for fine detail Lightweight aluminium housing Anti-fog tubus for clear view Faster, more reliable inspection with amplified detail The 5x magnification delivers a significantly enlarged view of tiny features, reducing inspection time and lowering the risk of missed defects. The compact optical design offers a clear, distortion‑managed image that supports repeatable visual checks; this translates into faster decision making on the shop floor and more consistent quality control. The aluminium construction combines durability with low weight, so handling fatigue is reduced during extended use. Built to stay clear and precise in workshop conditions A small hole in the tubus prevents lens fogging by allowing subtle air exchange, ensuring a consistently clear view during temperature changes or humid conditions. The single-lens configuration provides a straightforward optical path that is easy to clean and maintain, while the metal housing protects the element from knocks and abrasion. This results in lower downtime for maintenance and a longer useful life for the loupe as a routine inspection tool. Fits into precision workflows for small components Designed for detailed work on small products such as watches and jewellery, the loupe complements handheld measuring tools and precision calipers during dimensional checks. The compact form is suitable for bench inspection, assembly tasks and mobile quality checks, enabling technicians and hobbyists to verify fine features without complex equipment. The combination of clear optics and a robust body supports consistent inspection results across repetitive tasks. For application guidance or to source stock for workshop use, contact Metav Werkzeuge — their specialists in precision inspection tools can advise on compatibility and supply; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: MS905.392 Type: A20D Manufacturer: Peak Facts Magnification: 5x Lens: 1x Special features Aluminium housing Small anti-fog hole in the tubus Suitable for detailed work on watches and jewellery Category: Optik FAQ What magnification does this loupe provide? The Peak 5x hand loupe provides 5x magnification, suitable for enlarged inspection of fine details in small parts. Is the loupe suitable for watch and jewellery inspection? Yes. The loupe is specified for various tasks on small products such as watches and jewellery and complements precision caliper checks. How does the anti-fog feature work? A small hole in the tubus prevents condensation by allowing slight air exchange, keeping the lens clear during temperature changes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.7x Eye Loupe Small Dew-Prevention Vent, Aluminium - Peak
Take advantage of precise 6.7× magnification combined with a lightweight aluminium housing and an anti-fog vent for reliable close inspection of small components; order the solution directly via Metav Werkzeuge or consult our specialists for application advice. Peak eye loupe A26D — 6.7× magnification, aluminium housing A Peak eye loupe A26D designed for detailed visual inspection of small parts in workshop and jewellery settings 6.7× magnification for precise detail Lightweight aluminium housing, durable construction Small vent in tube prevents lens fogging Ideal for watches, jewellery and small components Enhanced visual accuracy for quality control The loupe delivers 6.7× magnification, making fine features and defects immediately visible without complex optics. Its single-lens optical system simplifies focus and provides a clear, undistorted view that supports fast quality checks and precision work. This optical setup is particularly useful where measurements with a caliper or micrometre are performed in tandem with visual inspection, since the enlarged image reduces interpretation errors and speeds up decision-making on the shop floor. Robust, workshop-ready construction with anti-fog advantage Constructed from aluminium, the housing combines low weight with mechanical resilience and corrosion resistance, supporting frequent daily use. A small vent in the tube prevents the lens from fogging during rapid temperature changes or extended inspection tasks, maintaining a consistent clear view and reducing downtime for cleaning. The slim, durable build facilitates handheld operation and makes the loupe easy to stow in a tool roll or inspection kit without risk of damage. Practical use cases and integration into inspection routines Designed for tasks such as watchmaking, jewellery assessment and small-component inspection, the loupe streamlines visual evaluation where detail matters. The compact design allows comfortable prolonged use while maintaining steady alignment with measuring instruments; this promotes repeatable results when checking tolerances or surface finish. Supplied optical clarity and anti-fog features support both routine checks and intricate repair work, helping workshops maintain throughput without compromising on inspection quality. Contact Metav Werkzeuge for tailored advice on integrating the Peak eye loupe A26D into inspection workflows — Metav Werkzeuge in Emmerich provides technical guidance and local availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS905.393 Type: A26D Brand: Peak Magnification: 6.7× Lens: 1x Core specifications Magnification: 6.7× Lens count: 1 Materials & special features Material: Aluminium Anti-fog vent in tube Suitable for watches, jewellery and small components Category: Optics FAQ What magnification does the loupe provide? The loupe offers 6.7× magnification, enabling detailed visual inspection of small features and defects for tasks such as watch and jewellery work. Is the housing suitable for regular workshop use? Yes; the aluminium housing provides a lightweight yet durable casing that withstands frequent handling in workshop environments. How does the loupe avoid lens fogging? A small vent in the tube prevents condensation build-up, keeping the viewing field clear during temperature changes or extended inspections with the Peak eye loupe A26D (MS905.393). Can the loupe be used alongside precision measuring tools? The optical enlargement complements measurements made with calipers or micrometres by clarifying fine details, supporting precise inspection workflows. For which applications is this loupe intended? The loupe is intended for close inspection of small components, notably in watchmaking, jewellery assessment and similar fine-detail workshop tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Clamp For Work Light Holder, Adjustable Opening - Metav IndustryLine
A compact clamp that provides a secure mounting solution with a maximum 60 mm jaw opening and a low weight of 0.2 kg, ideal for stable positioning of work lights and small optical accessories; order directly via Metav Werkzeuge or consult our specialists for application advice. Clamp for 503.164 — mounting clamp with max. 60 mm opening by Metav IndustryLine Clamp for 503.164 is a compact mounting clamp designed to secure work lights and optical attachments, offering a reliable grip with a maximum jaw opening of 60 mm for versatile workshop use. Max. 60 mm opening for versatile mounting Lightweight design, approx. 0.2 kg Compatible with M503.167 caliper fittings Robust clamp for optical and lighting setups Stable mounting that reduces repeat adjustments The clamp delivers a secure hold tailored for small optical devices and workshop lighting, thanks to its 60 mm maximum opening which accommodates a wide range of attachment diameters. The design focuses on repeatability: once set, the clamp maintains position under typical workshop loads, minimising the need for re‑alignment during assembly or inspection work. This reliability supports efficient processes and reduces inspection downtime, an important factor in production and maintenance environments. Lightweight handling that speeds up setup Weighing just 0.2 kg, the clamp is easy to manoeuvre and fast to install, which speeds up routine changes in workstations or inspection stations. The low mass reduces operator effort during frequent repositioning and allows for swift configuration of lighting and optical accessories. The compact form factor also contributes to unobtrusive mounting near delicate test rigs, making it suitable where space is limited but stable support is still required. Clear compatibility for workshop integration Designed to interface with established metrology and accessory components, the clamp is compatible with M503.167 fittings and integrates smoothly into optical and illumination setups in laboratories and workshops. The construction is aimed at users seeking a practical, no‑fuss mounting solution for tasks such as visual inspection, small‑part assembly and targeted illumination. Its straightforward function makes it a practical complement to measurement and optical toolkits. For secure mounting backed by Metav IndustryLine reliability, contact Metav Werkzeuge for personalised advice and prompt supply from Emmerich. Technical data Article number: M503.164.1 GTIN: 4054469164571 Customs tariff number: 90139080 Product label: Clamp for 503.164 – max. opening 60 mm Category: Optics Facts Max. opening: 60 mm Weight: 0.2 kg SKU: M503.164.1 Special features Compatible with M503.167 fittings Designed for optical and lighting setups Compact, low‑weight construction FAQ How large is the jaw opening and what does it fit? The clamp offers a maximum jaw opening of 60 mm; the design suits work lights and small optical accessories, compatible with fittings such as M503.167. Is the clamp suitable for repeated repositioning in a production environment? Yes, the clamp for 503.164 is engineered for repeatable, stable mounting so frequent adjustments and repositioning remain precise and straightforward. What is the weight and does that affect handling? At approximately 0.2 kg the clamp is lightweight, which facilitates quick handling and reduces operator fatigue during repeated setups. Can this clamp be integrated with calipers or metrology fixtures? The clamp is compatible with M503.167 caliper fittings and can be integrated into inspection and optical workstations as a practical mounting accessory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60x75x190 3.5x Illuminated Magnifier for Reading and Inspection, 52x52 Field - Peak
Compact, battery-powered inspection that combines 3.5× magnification with a generous 52×52 mm viewing area for accurate readings; lightweight dimensions make the unit easy to handle across workshops and inspection stations. Order the Peak illuminated magnifier directly via Metav Werkzeuge or consult our advisers for application-specific guidance. Peak illuminated magnifier MS905.212 — 3.5× handheld inspection loupe with integrated illumination The Peak illuminated magnifier 3.5× is a compact, battery-powered optical aid designed for close-up tasks such as map reading, display reading and monitoring of production processes. 3.5× magnification for clear detail Integrated illumination for low-light use 52 × 52 mm viewing area for broader inspection Runs on 2 × Type‑C batteries (not included) Accurate visibility for precision checks and measurements The 3.5× magnification, combined with a 52×52 mm viewing area, offers a balance between enlarged detail and situational awareness, enabling clear observation of small markings without losing the surrounding context. The compact dimensions (60×75×190) mean the tool fits into a pocket or kit, while the Type‑C battery format simplifies logistics since replacements are standard and widely available. This configuration supports repeatable visual inspections and reduces the likelihood of read-off errors on small instruments or scale displays. Designed for practical use in workshops and field checks With integrated illumination, the loupe maintains legibility in poor lighting conditions, so tasks like map reading, display reading and on‑line production monitoring remain reliable throughout a shift. The lightweight, hand-held design encourages fast, frequent checks without causing fatigue, and the replaceable battery concept keeps downtime to a minimum. For inspection tasks where speed and clarity matter, this optical aid streamlines decision-making and helps maintain quality control. Reliable optical aid for routine inspection and documentation The unit’s straightforward feature set supports consistent documentation during quality checks and simplifies training for staff who perform repeated visual inspections. The robust approach of using a standard Type‑C power source and a clearly defined viewing area helps integrate the tool into existing processes, ensuring that readings are comparable over time and across different operators. Its portability makes it a practical choice for workshops, labs and on-site assessments where flexible, dependable visual inspection is required. Contact Metav Werkzeuge today to confirm the suitability of the Peak illuminated magnifier MS905.212 for the intended application or to arrange procurement directly from our Emmerich warehouse Technical data Article number: MS905.212 Product: Peak illuminated magnifier, 3.5× Manufacturer: Peak Facts Dimensions: 60 × 75 × 190 Viewing area: 52 × 52 Magnification: 3.5× Power: 2 × Type‑C (not included) Special features Integrated illumination Portable handheld design Suitable for map reading, display reading, production inspection Standard Type‑C battery power FAQ How strong is the magnification of this loupe? The Peak illuminated magnifier MS905.212 offers a 3.5× magnification suitable for detailed visual inspection and easy reading of small displays. Can the magnifier be used in low-light environments? Yes, the integrated illumination of the Peak illuminated magnifier ensures clear visibility in low-light and shadowed areas during inspection tasks. What power source is required and is it included? The device runs on 2 × Type‑C batteries; these are not included with the Peak illuminated magnifier MS905.212. Is the viewing area suitable for reading instrument displays? The 52 × 52 mm viewing area provides a wide enough field for many instrument displays and helps keep adjacent reference marks in view. What typical applications is this loupe recommended for? This optical aid is recommended for map reading, reading small displays and routine production monitoring where quick, reliable visual checks are needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
65 x 65mm Beleuchtungslupe
- mit 6 LED-Leuchten 2 x AAA Batterie erforderlich (nicht im Lieferumfang enthalten)Technische Daten- Linse: 65 x 65mm- Dioptrie: 4
6x 25x25 Field Folding Loupe with Engraved mm Scale, Aluminium - Peak
Peak Folding Loupe — Rectangular Aluminium, 6x Peak Folding Loupe is a compact folding loupe designed for precise close‑up inspection and measurement tasks, featuring 6× magnification and a robust aluminium housing for portable, accurate use. 6× Magnification for clear detail Rectangular aluminium housing for stability Engraved mm scale for quick measurement Wide 25×25 sight field for easier inspection Exceptional magnification and measurement accuracy The Peak Folding Loupe delivers consistent 6× magnification with a single lens assembly (Lens: x1), producing sharp, distortion‑controlled images that aid in jewellery inspection, watch repair, print quality checks and electronics work. The integrated engraved mm scale enables immediate approximate measurements without additional tools, reducing setup time and improving workflow efficiency. This practical combination of magnification and scale turns visual inspection into an actionable task, helping users reach conclusions faster and with greater confidence. Durable design for everyday professional use Built around a aluminium frame, this folding loupe balances lightweight handling with robust protection for the optics. The rectangular form factor increases contact area and steadiness during use, which is particularly beneficial when examining flat surfaces or small assemblies. Users who value reliability and portability will appreciate the solid feel and the protective folding mechanism that keeps the lens safe during transport and storage. Practical field of view and simple handling explained The listed sight field "25x25" describes the visible area when using the loupe, allowing the user to see a larger portion of the inspected object without frequent repositioning. The straightforward single‑lens setup keeps maintenance minimal and provides a clear visual experience for both beginners and experienced professionals. For tasks that require repeated inspections or quick comparisons, the Peak Folding Loupe streamlines the process and reduces handling time. Choose the Peak Folding Loupe from Peak for reliable close‑up inspection and contact METAV Werkzeuge for expert, personalised advice — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 METAV Werkzeuge — the retailer — offers extensive, competent consultation. Not sure whether this tool meets your requirements? Or need additional technical data? No problem — we are happy to help. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product name: Peak Folding Loupe (translated from "Peak Klapplupe") Brand / Manufacturer: Peak SKU: MS905.376 Description: Rectangular aluminium folding loupe, 6× magnification Material: Aluminium Magnification: 6× Lens: x1 Sight field: 25x25 Special feature: With engraved mm scale UID: MS905.376 Manufacturer in english: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com FAQ What tasks is the Peak Folding Loupe from Peak suitable for? The Peak Folding Loupe by Peak is ideal for detailed inspection tasks such as jewellery appraisal, watchmaking, print inspection and electronics checks, where 6× magnification and the engraved mm scale support precise visual assessment. How do I measure with the Peak Folding Loupe and its engraved mm scale? Using the Peak Folding Loupe (Peak brand), position the loupe over the object and align the engraved mm scale against the feature to be measured; the combination of the 25x25 sight field and the scale allows quick, approximate measurements directly through the loupe. Is the Peak Folding Loupe robust enough for daily professional use? Yes, the Peak Folding Loupe from Peak features an aluminium housing and a protective folding mechanism designed for repeated use and transport, offering a durable solution for professionals and hobbyists alike. Can METAV Werkzeuge provide further technical information about the Peak Folding Loupe? METAV Werkzeuge can supply additional details and personalised advice regarding the Peak Folding Loupe; contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert support.
6x Rectangular Thread Counter Zinc With Engraved Mm Scale, 25x25 Field Of View - Peak
Combine compact design, a robust zinc body and a clearly engraved mm-scale for efficient textile inspection; the compact dimensions speed up on-site checks and reduce handling time. Order the Peak Thread Counter directly via Metav Werkzeuge or ask our consultants if needed. Peak Thread Counter MS905.382 — zinc optical thread counter with engraved mm-scale The Peak Thread Counter is a compact optical instrument for textile inspection and thread counting, presented as a rectangular zinc tool ideal for quick density and weave checks. Compact zinc construction Engraved mm scale on both sides 25x25 view field Small footprint for fast handling Accurate counts for quality control and process reliability Precision in measurement is essential for textile quality assurance. The Peak Thread Counter combines a clear optical view with an engraved mm-scale to make thread density measurements verifiable and repeatable. The marked scale corresponds to the width of the viewing field, enabling direct conversion from counted threads to units per length without additional calculation. This direct measurement method reduces inspection time and supports consistent quality control across production batches. Small size, big practical advantage for inspection routines Owing to its compact dimensions and lightweight zinc construction, this thread counter is designed for handheld use and rapid checks on the production floor or at incoming inspection. The modest footprint simplifies handling during repeated measurements and allows the instrument to be carried in a tool pouch or drawer without consuming much space. The robustness of the body provides resilience in workshop environments while keeping the overall device easy to manoeuvre for fast sampling. Clear scale and field of view explained for non-specialists The instrument’s 25x25 view field and side-mounted engraved scale mean that the scale length matches what is seen through the lens; counts taken within the field can be read directly against the scale. For operators not versed in optical instruments, this removes ambiguity: count the threads visible across the marked span and read the value directly. The metal construction also minimises flex and wear of the scale markings, preserving measurement accuracy over repeated use. For reliable, fast textile inspections with a durable zinc instrument, request the Peak Thread Counter from Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for product details and purchasing assistance Technical Data Article number: MS905.382 Label: Peak Fadenzähler Manufacturer: Peak Facts View field: 25x25 Special features Material: zinc (black) Engraved mm scale on both sides Rectangular foot; small dimensions for easy handling Image file: MS905377-main.jpg FAQ How is the scale on the thread counter intended to be used? The engraved mm scale is aligned with the viewing field so counts read across the marked span give direct metric values when using the Peak Thread Counter (MS905.382). Is the instrument suitable for portable, on-the-spot inspections? Yes, the compact zinc body and small footprint make the counter appropriate for handheld, on-site checks in production and incoming inspection processes. Does the tool require calibration before use? The engraved scale is fixed to the body; routine verification against a reference sample is recommended to confirm counting practice rather than formal calibration. What materials or fabrics is the counter intended for? The device is optimised for visual thread counting and weave inspection across woven textiles where a marked viewing span is effective for density determination. Can the viewing field be measured or adjusted? The viewing field is specified as 25x25 and matches the engraved scale length; the field is fixed and intended to provide a standardised span for quick counts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
700mm Stand for Illuminated Magnifier Foot Width 650mm With Castors - Metav IndustryLine
Take advantage of the combination of a 650 mm wide base for stable support, a 700 mm working height for ergonomic viewing and easy mobility thanks to integrated castors. Order the stand directly via Metav Werkzeuge or ask our consultants if needed. Stand for illuminated magnifier (700 mm height, 650 mm base) — Metav IndustryLine A Stand for illuminated magnifier (700 mm height, 650 mm base) designed to provide stable, mobile support at inspection benches and assembly stations. Height 700 mm for ergonomic viewing Stable 650 mm wide base for consistent positioning Smooth castors for easy workshop repositioning Lightweight 6.6 kg for straightforward handling Engineered stability for precise inspection The support column and broad base deliver a stable platform that reduces vibration and movement during fine visual inspection. With a 650 mm base width and a total height of 700 mm, the geometry is optimised for bench-top tasks where repeatable posture and a steady view are essential. The relatively low mass of 6.6 kg keeps the unit manageable while preserving steadiness; this balance helps to maintain consistent inspection results when paired with magnifiers and small optical instruments. Faster workflows through ergonomic positioning and mobility A defined working height of 700 mm positions optics at a practical eye level for seated or standing operators, improving comfort and reducing fatigue during prolonged inspection. The fitted castors enable quick lateral movement between workstations, supporting dynamic production flows and short set-up times. Compatibility with the common model range M503.164–M503.168 ensures straightforward integration with existing illuminated magnifiers, simplifying equipment planning in busy workshops. Practical design for long service life and simple handling The design focuses on functional performance: a broad footprint for repeatable placement, integrated mobility and a compact overall package that is easy to store when not in use. The straightforward construction minimises maintenance needs and reduces points of failure, which supports reliable daily use in industrial and craft environments. As a Metav IndustryLine product, the stand complements the company’s emphasis on accessible precision and dependable supply chains for professional workshops. For tailored workshop integration and ordering of the Metav IndustryLine stand, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical fit and delivery options Technical Data SKU: M503.165.2 GTIN: 4054469181882 Category: Optik Label: Stand for illuminated magnifier, height 700 mm, base width 650 mm, with castors Facts Height: 700 mm Base width: 650 mm Weight: 6.6 kg Compatible models: M503.164–M503.168 Special features With castors for mobility Broad base for stability Designed for bench-top inspection use FAQ What is the working height of this stand? The stand provides a working height of 700 mm, offering an ergonomic viewing position for typical inspection and assembly tasks with illuminated magnifiers. Which magnifier models are compatible with this stand? Compatibility is listed for models M503.164–M503.168; the stand is intended to pair with these illuminated magnifiers for stable support. How mobile is the support during workshop use? Mobility is achieved via integrated castors, enabling easy repositioning of the stand between workstations while maintaining a stable base when settled. Is the stand heavy to handle when relocating? At 6.6 kg the support is lightweight enough for straightforward handling yet substantial enough to provide steady support for bench-top optics. What are the identifiers for ordering and stock control? SKU M503.165.2 and GTIN 4054469181882 identify this Metav IndustryLine stand for procurement and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
inspect faster and with greater certainty using magnifiers
Magnifiers (also known as loupe and magnifying glass) are optical instruments that render small objects and surface details visibly larger, producing a virtual, upright image through a converging lens. In metallography and industrial quality assurance they represent the first stage of optical inspection, offering a fast, reliable check before more detailed analysis with microscopes.
how magnifiers work and where they belong in the workflow
A magnifier’s enlargement is determined mainly by the focal length of its lens: the shorter the focal length, the higher the achievable magnification. Typical workshop types include the hand magnifier for quick surface checks, the folding or inspection magnifier for stable close-up work at the bench, the measuring magnifier with an integrated reticle for direct dimension checks, and the stand magnifier for fatigue-free, repeatable inspection at a fixed working distance. In practice they are indispensable for spotting hairline cracks, corrosion, tiny burrs and for reading fine engravings on components.
practical advantages that improve production throughput
- Rapid first-pass inspection, reducing time sent to downstream process steps and avoiding unnecessary rework.
- Direct measurement capability with measuring magnifiers, enabling quick quantitative checks without switching tools.
- Stable positioning with stand magnifiers, lowering operator fatigue and increasing repeatability.
- Compact, portable options (hand and folding magnifiers) for in-situ checks on assemblies or machines.
- Simple optical design: robust, low-maintenance tools that complement microscopes for layered inspection strategies.
why choose metav as your precision partner
Metav democratises precision by making high-quality measuring tools affordable for every workshop. From our base in Emmerich we act as a quality filter for the European market, supplying over 250,000 products and trusted by more than 48,000 customers. That breadth ensures you can reduce supplier complexity while sourcing the right magnifiers — from portable hand lenses to calibrated measuring models — backed by a consistent supply chain and industrial expertise.
In short, magnifiers provide immediate, reliable optical inspection for workshop and production environments, combining simplicity with measurable time and quality benefits.
faq
What types of magnifiers are commonly used in metal inspection?
Common types used in metal inspection include the hand magnifier for quick checks, the folding or inspection magnifier for close work, the measuring magnifier with reticle for dimension assessment, and the stand magnifier for prolonged, stable inspection.
How does magnification relate to focal length?
Magnification is primarily governed by the focal length of the lens: a shorter focal length results in higher magnification, which determines how much larger the virtual, upright image appears compared with the naked eye.
Can magnifiers replace microscopes for quality assurance?
Magnifiers are intended as a first-line optical inspection tool; they are ideal for rapid checks and measurements but do not replace detailed analysis performed with microscopes, which are required for higher-magnification examination and microstructural evaluation.
Are measuring magnifiers suitable for quantitative checks on welds and cracks?
Yes. Measuring magnifiers with an integrated reticle or scale enable direct, quantitative assessment of features such as crack widths, groove depths or small weld defects, speeding up in-process decisions.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com