Enhanced inspection with loupe viewing
Loupes provide quick, magnified visual assessment for metalworking and quality assurance, helping operators detect surface defects and measure fine features with minimal setup; they serve applications from metallography to workshop inspection by offering handheld, folding and stand-mounted options that suit different tasks and working distances. The tools are designed to deliver a clear virtual, upright image via a converging lens, where magnification depends on focal length, and they support both rapid checks and more precise measurements when equipped with a scale. Using a loupe improves throughput by enabling early detection of faults, protecting downstream processes and reducing rework through faster decision-making based on visual inspection, surface analysis and dimensional checking.
Ø36x58x175 7x Inspection Loupe With Illumination, Achromatic Lens, Ø22 Field - Peak
Benefit from precise 7× magnification and an achromatic lens for accurate visual inspection; the integrated illumination keeps details visible even under poor lighting. Order the Peak measuring loupe directly via Metav Werkzeuge or consult our advisors for technical guidance. Peak MS905.138 Measuring Loupe — 7× Magnification with Illumination and Achromatic Optics The Peak measuring loupe MS905.138 is a compact, illuminated inspection loupe designed to support precise measurement and visual checks in quality control and workshop environments. 7× magnification for fine detail Achromatic lens minimises colour fringing Integrated illumination, uses 2× Type C batteries Accurate optics that improve inspection outcomes The loupe’s achromatic lens corrects for chromatic aberration, producing a sharper, truer image than simple single-element lenses; this reduces judgement error when comparing marks, printed circuits or fine surface defects. With 7× magnification, small features become legible without excessive distortion, enabling faster assessment cycles and more reliable dimensional comparisons. The combination of corrected optics and consistent magnification promotes repeatable results during incoming inspection and routine quality checks. Illuminated viewing for consistent, efficient work Integrated lighting ensures an even, shadow-free view of the inspection area, making measurements and defect detection possible under workshop lighting conditions. The light source is battery powered — 2× Type C (not included) — which keeps the loupe portable and ready at any workstation without reliance on mains power. The clear field of view Ø22 mm balances magnified detail with sufficient context, so operators can both inspect features closely and maintain spatial orientation on the workpiece. Design and handling built for daily use Compact dimensions Ø36 × 58 × 175 mm make the loupe easy to position and manoeuvre in confined inspection zones. The unit’s form factor supports handheld operation or temporary mounting on inspection rigs when required, improving ergonomics and reducing fatigue during repetitive tasks. Durable construction suited to shop-floor use ensures that the optics remain aligned and ready for production environments where speed and reliability matter. Practical benefits for workshops and quality teams Small and focused, this inspection device accelerates decision-making by delivering a clear visual basis for accept/reject choices and measurement verification. The illuminated, achromatic optics reduce the time spent re-checking suspicious parts and minimise false positives caused by poor contrast or colour fringing. For procurement and quality managers looking to standardise inspection kits, the loupe provides a compact, low-maintenance option that complements calipers and other hand tools used on the bench. Contact Metav Werkzeuge for advice on integrating the Peak MS905.138 into inspection workflows or to request procurement information — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: MS905.138 Product name: Peak measuring loupe, illuminated, 7× Specifications Magnification: 7× Field of view: Ø22 mm Dimensions: Ø36 × 58 × 175 mm Power: 2× Type C batteries (not included) Lens type: Achromatic Materials & Features Brand: Peak Category: Optics Illuminated version Compact inspection loupe FAQ What magnification does this loupe provide? The loupe offers 7× magnification, which is suitable for close visual inspection and small-feature verification with the Peak MS905.138. Is the lens corrected for colour fringing? Yes. The achromatic lens in the Peak MS905.138 reduces chromatic aberration to give a clearer, more accurate image during inspections. How is the loupe powered? The illuminated version is battery operated and requires 2× Type C batteries, which are not included. What is the diameter of the viewing area? The device provides a field of view of Ø22 mm, enabling inspection of small details while keeping sufficient context. Is the loupe suitable for workshop use? Designed for durability and portability, the Peak MS905.138 is well suited to shop-floor inspection and quality-control stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø36x62 Precision Magnifier 7x With Standard Template, Ø26 Field Of View - Peak
Taking advantage of 7× magnification and an achromatic lens delivers clearer visual measurement and reduced inspection time; combined with a compact Ø26 mm field of view and a 0–20 mm measuring range with 0.1 mm scaling, this loupe supports reliable workshop and quality‑control checks — order directly via Metav Werkzeuge or contact our consultants for technical clarification. Peak MS905.140 Measuring Loupe — 7× achromatic lens, Ø26 mm field of view The Peak MS905.140 Measuring Loupe is a compact inspection loupe designed for precise visual measurement and routine quality checks in workshops and inspection stations. 7× magnification for clear component inspection Achromatic lens reduces colour fringing Measuring range 0–20 mm with 0.1 mm scale Faster, measurable inspection for production control With 7× magnification and a 0–20 mm measuring range, this loupe is engineered to make routine checks faster and more consistent. The integrated 0.1 mm scale enables immediate reading of small features without auxiliary gauges, which reduces throughput delays caused by repeated measurements. In production runs where cycle time and reproducibility matter, the instrument supports decision‑making with visual data that are repeatable and verifiable, helping to reduce rework rates and maintain process stability. Optical clarity that improves measurement certainty The achromatic lens corrects for chromatic aberration, so edges and fine details appear sharply without coloured fringing. A clear image means less doubt when aligning the scale with a feature, directly lowering measurement uncertainty. The generous Ø26 mm field of view allows comfortable observation of components and templates at once, aiding rapid comparison and inspection. For customers transitioning from simple magnifiers, the corrected optics provide an immediate upgrade in visual quality and confidence. Compact, durable design for shop‑floor routines At Ø36 x 62 mm, the loupe is compact enough for handheld use and for keeping at inspection benches. It includes a standard measurement template, enabling quick reference checks without additional tooling. The small footprint and simple handling make the instrument suitable for multiple settings: bench inspection, incoming goods control, and fine‑work visual verification. Because the device is purely optical, it requires no power and is ready to use at any workstation, streamlining routine checks across shifts. Save time with straightforward handling and clear results Quick alignment, instant readings and a corrected optical system combine to reduce hesitation and improve throughput during inspection tasks. The loupe’s features are aimed at pragmatic benefits: faster decision cycles, fewer unnecessary measurements and clearer documentation of non‑conformances. If traceable photographic records are required, the clear, fringing‑free view simplifies visual communication between operators and quality engineers and supports consistent audit evidence. For availability, ordering or technical assistance from Metav Werkzeuge — including stock information and delivery to European workshops — please contact info@metav-werkzeuge.com or call +49 2822 7131930; the Peak MS905.140 can be dispatched promptly from Emmerich. Technical Data Article number: MS905.140 Name: Peak Measuring loupe with standard template, 7× Brand: Peak Specifications Magnification: 7× Measuring range: 0–20 mm Scale: 0.1 mm Field of view: Ø26 mm Dimensions: Ø36 x 62 mm Features Achromatic lens (reduced chromatic aberration) Includes standard measurement template Category: Optics Image asset available (thumbnail) FAQ What magnification does the loupe provide? The Peak MS905.140 provides 7× magnification for detailed component inspection. What measuring range and scale are available? Measuring range is 0–20 mm with a 0.1 mm scale for straightforward readings. Does the lens correct for chromatic aberration? Yes — the achromatic lens in the MS905.140 reduces colour fringing and sharpens edge definition for clearer measurements. Is the loupe suitable for workshop and incoming‑goods inspection? Yes — the compact design and included standard template make it suitable for bench inspection, incoming goods checks and routine quality control. Is an image or product thumbnail available for reference? An image asset and thumbnail are available for visual reference and catalogue use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø38x74 Telecentric Magnifier 7x With 24mm Field, 0.1mm Scaling - Peak
Benefit from distortion‑free telecentric imaging combined with precise 7× magnification and a 0.1 mm scale for consistent inspections across a 0–20 mm range. Order the instrument directly via Metav Werkzeuge or consult our specialists for application guidance. Peak telecentric loupe MS905.136 — 7× magnification, telecentric optics The Peak telecentric loupe MS905.136 is a compact inspection instrument designed for distortion‑free optical measurement and repeatable visual checks in quality control and bench inspection tasks. Telecentric optics for distortion‑free measurement 7× magnification for detailed inspection Ø24 mm field of view for component overview High‑precision imaging for reliable decisions The telecentric design provides distortion‑free images so linear dimensions can be compared visually without perspective error; this is particularly important for small parts where edge position matters. With 7× magnification and a readable 0.1 mm scale, the loupe supports fast go/no‑go assessments and helps reduce rework rates. The optical arrangement keeps measurement geometry consistent across the frame, enabling clearer pass/fail judgements on tiny features. Efficient inspection across a practical working range A Ø24 mm field of view gives a balanced overview of most small components while the optical measuring range 0–20 mm covers common part heights and step measurements on precision parts. The included standard template simplifies repeatable checks and standardises visual inspection routines, which accelerates throughput on the shop floor and reduces reliance on multiple gauges for quick checks. Compact format that suits busy benches At Ø38 x 74 mm, the unit is compact enough for bench mounting or inclusion in a visual inspection station without occupying excessive space. The compact footprint supports quick placement and repositioning, meaning inspection cycles become faster and more predictable. Robust optical construction and simple mechanical dimensions aid integration into existing workflows and visual quality control stations. Practical handling and support for integration The instrument is straightforward to use for routine inspections and visual verification tasks; clear markings and a wide field assist operators with limited optical training. For specification clarifications or to confirm suitability for a particular process, technical advice is available from Metav Werkzeuge — ensuring correct selection and rapid deployment. This combination of repeatability, clarity and support minimises downtime and improves yield consistency. Speak with Metav Werkzeuge for tailored measurement advice on the Peak telecentric loupe MS905.136, arrange procurement or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: MS905.136 Name: Peak telecentric loupe MS905.136 Brand: Peak Category: Optics Key figures Magnification: 7× Field of view: Ø24 mm Scale: 0.1 mm Measuring range: 0–20 mm Dimensions: Ø38 x 74 mm Features & accessories Telecentric optics Standard template included Compact bench inspection format FAQ What level of magnification does the loupe provide? The Peak telecentric loupe MS905.136 offers 7× magnification, enabling detailed visual inspection and clearer assessment of small features. Which measuring range is suitable for routine checks? The instrument covers a measuring range of 0–20 mm, which is suitable for typical component heights and step measurements in precision workshops. How wide is the visible inspection area? A Ø24 mm field of view provides a balanced overview for most small parts, supporting quick visual comparisons and alignment checks. Is any accessory included to support repeatable checks? Yes, the loupe is supplied with a standard template to help standardise inspections and reduce variability between operators. Can this loupe eliminate perspective distortion during measurement? The telecentric optics minimise perspective error, delivering distortion‑free imaging that supports more reliable visual measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø41,5x122 Mikroskop 100x mit abnehmbarem Gummi-Augenaufsatz, Ø0,84 Sichtfeld - Peak
Peak Schablonenmikroskop — Messmikroskop Das Peak Schablonenmikroskop bietet optische Präzision für feine Messaufgaben in Werkstatt und Labor und eignet sich besonders für die schnelle Kontrolle von Schablonen, Prägeteilen und feinen Bauteilen Peak Schablonenmikroskop »MS905.258« 100x Vergrößerung Sichtfeld Ø0,84 für präzise Detailbeobachtung Skalierung 0,005 für exakte Messungen Messbereich 0–0,8 für feine Messaufgaben Abnehmbarer Gummi-Augenaufsatz für Komfort Präzision und Messleistung für den Arbeitsalltag Das Mikroskop ist auf wiederholbare Messungen ausgelegt und kombiniert eine 100x Vergrößerung mit feiner Skalierung. Dadurch lassen sich Konturen und Kanten von Schablonen sowie feine Strukturen schnell beurteilen und quantifizieren. Die Skalierung 0,005 ermöglicht feine Ablesungen, die den Prüfvorgang beschleunigen und Nacharbeit reduzieren. Anwender profitieren von einer klaren Visualisierung, die Routinekontrollen messbar sicherer macht. Ergonomie und Komfort bei längeren Prüfzyklen Mit einem abnehmbaren Gummi-Augenaufsatz ist das Gerät für wechselnde Anwender angenehm nutzbar und reduziert Ermüdungserscheinungen bei längeren Prüfungen. Das moderate Arbeitsabstand von 11,6 unterstützt eine sichere Handhabung von Mustern und Schablonen, ohne die Sicht zu beeinträchtigen. Der komfortable Augenaufsatz erleichtert dabei das Fokussieren und trägt zur konstanten Prüfroutine bei. Einsatzbereiche und Zielgruppe Dieses optische Messgerät richtet sich an Werkstätten, Qualitätssicherung und Ausbildung, in denen schnelle und zuverlässige Sichtprüfungen erforderlich sind. Durch den Messbereich 0–0,8 ist es ideal für sehr kleine Toleranzen und filigrane Teile. Das Gerät eignet sich besonders für Anwender, die wiederholbare Prüfprozesse mit geringem Aufwand implementieren wollen, ohne auf Präzision zu verzichten. Robustheit und Handhabung Die kompakte Abmessung Ø41,5x122 macht das Gerät vielseitig einsetzbar auf Prüfplätzen mit begrenztem Platzangebot. Die Kombination aus klarem Sichtfeld Ø0,84 und präziser Skalierung unterstützt schnelle Prüfzyklen. Der mitgelieferte Kasten sorgt für sichere Aufbewahrung und einfachen Transport zwischen verschiedenen Arbeitsplätzen. Empfehlung: Das Peak Schablonenmikroskop für zuverlässige 100x-Messungen direkt über Metav Werkzeuge anfragen — Beratung und Bestellung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: MS905.258 Marke: Peak Bezeichnung: Peak Schablonenmikroskop 100x Fakten Vergrößerung: 100x Skalierung: 0,005 Messbereich: 0–0,8 Messbereich Min: 0 Messbereich Max: 0.8 Arbeitsabstand: 11,6 Abmessung: Ø41,5x122 Sichtfeld: Ø0,84 Besonderheiten Kasten: ja Mit abnehmbarem Gummi-Augenaufsatz FAQ Wie genau lässt sich mit dem Peak Schablonenmikroskop messen? Das Peak Schablonenmikroskop verfügt über eine Skalierung 0,005, die eine sehr feine Ablesung erlaubt und somit eine hohe Messgenauigkeit für feine Bauteile und Schablonen sicherstellt. Für welche Bauteile ist das Mikroskop besonders geeignet? Das Mikroskop ist ideal für kleine, filigrane Bauteile mit engen Toleranzen; der Messbereich von 0–0,8 eignet sich besonders für Prägeteile, Schablonen und feine Messaufgaben. Wie unterstützt der Gummi-Augenaufsatz die Arbeit? Der abnehmbare Gummi-Augenaufsatz erhöht den Anwenderkomfort und reduziert Blendung und Ermüdung bei längeren Prüfroutinen, was zu zuverlässigeren Ergebnissen mit dem Peak Schablonenmikroskop führt. Kann das Gerät mobil im Betrieb eingesetzt werden? Ja, die kompakte Abmessung Ø41,5x122 und der mitgelieferte Kasten ermöglichen einfachen Transport und sicheren Einsatz an verschiedenen Prüfständen. Ist das Sichtfeld ausreichend für Detailprüfungen? Das Sichtfeld Ø0,84 bietet eine gute Balance aus Feldbreite und Detailauflösung, sodass feine Strukturen und Kanten sicher erkannt und bewertet werden können. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø41.5x122 25× Template Microscope With Removable Rubber Eye Cup 0.05mm Scale, Ø3.3mm Field - Peak
Take advantage of precise visual measurement with 25x magnification and a fine 0.05 mm scale for quick, reliable checks on small components; the compact diameter and Ø3.3 mm field of view make the instrument suitable for tight bench spaces. Order the Peak Template Microscope MS905.249 directly via Metav Werkzeuge or ask the consultants for application advice. Peak Template Microscope MS905.249 — 25x inspection microscope with removable rubber eyecup Peak Template Microscope MS905.249 is a compact measuring microscope designed for visual inspection and simple dimensional checks of small parts in production and quality control environments. 25x magnification for clear detail Measuring scale 0.05 mm Measuring range 0–3 mm Removable rubber eyecup for comfort Accurate small-scale measurement that speeds decision-making The instrument delivers 25x magnification combined with a calibrated 0.05 mm scale, enabling precise measurement within a 0–3 mm range. The small Ø3.3 mm field of view concentrates on the inspected area, which aids in identifying fine defects or dimensional deviations quickly. For operators unfamiliar with micrometre-level scales, the marked graduations translate directly to tangible reductions in inspection time: one division corresponds to 0.05 mm, so routine comparisons and pass/fail assessments become straightforward and repeatable. Designed for repeatability and operator comfort A removable rubber eyecup enhances comfort during extended inspection periods and can be cleaned or replaced to maintain consistent observation conditions. The working distance of 17 mm ensures a practical clearance for examining small assemblies without contact, while the compact external dimensions Ø41.5×122 mm keep the instrument unobtrusive on crowded benches. Together, these design choices reduce operator fatigue and support consistent alignment between successive inspections, improving throughput and lowering the likelihood of measurement errors. Integrates into inspection workflows with minimal disruption The compact footprint and direct visual scale make the microscope suitable for inline quality checks, lab benches or small assembly stations where space is limited. Because the scale is readable at a glance, inspection cycles are shortened, enabling faster decisions and fewer production interruptions. The combination of optical clarity and a concise measuring range makes this device particularly useful for electronics, fine mechanical components and prototype verification where rapid, localised inspection is required. Practical features for everyday metrology Cleaning and maintenance are uncomplicated thanks to the detachable eyecup, and the straightforward optical setup avoids lengthy calibration routines for routine checks. The instrument’s construction focuses on delivering practical measurement capability rather than complex electronics, which supports reliable operation in busy workshop settings. As a compact visual metrology tool from Peak, the MS905.249 offers a balance of clarity, simple measurement functionality and ergonomic detail that suits quality control and workshop environments. For straightforward integration into inspection workflows, contact Metav Werkzeuge to discuss the Peak MS905.249 and arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.249 Name: Peak Template Microscope Brand: Peak Category: Optik Facts Magnification: 25x Scale: 0.05 mm Measuring range: 0–3 mm Field of view: Ø3.3 mm Working distance: 17 mm Dimensions: Ø41.5×122 mm Special features Removable rubber eyecup Compact design for bench use Suitable for visual inspection and simple measurement FAQ What is the smallest increment readable on the scale? The scale on the Peak Template Microscope MS905.249 is graduated in 0.05 mm increments, allowing clear estimation of small dimensional differences within the 0–3 mm range. Can the eyecup be cleaned or replaced? Yes, the removable rubber eyecup can be detached for cleaning or replacement to maintain optical comfort and hygiene during extended use of the Peak MS905.249 inspection microscope. Which types of components suit this microscope? The instrument is optimised for small, detailed parts such as electronic components, fine mechanical parts and prototype pieces where visual inspection and short-range measurement are required. What are the optical working parameters to consider when setting up? Key parameters are the 25x magnification, Ø3.3 mm field of view and working distance 17 mm, which together determine the inspection area and the clearance needed above the specimen. Is this microscope intended for complex dimensional measurement tasks? The MS905.249 is designed for rapid visual checks and simple dimensional comparison within a 0–3 mm range rather than for high-precision metrology requiring digital readouts or long-range measurement systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø41.5x122 Template Microscope 50x With Removable Rubber Eyecup, 0.02mm Scaling - Peak
Take advantage of precise visual inspection and reliable measurement in a compact package: the integrated 50× magnification, fine 0.02 mm scale and a removable rubber eyecup ensure repeatable results and comfortable use in production and quality control. Order via Metav Werkzeuge for dependable supply and expert advice. Peak template microscope — workshop template microscope with compact design and precise optics The Peak template microscope serves as a compact visual inspection and simple dimensional-checking instrument suitable for workshop benches and production inspection stations. 50× magnification for fine detail Field of view Ø2.0 mm for targeted inspection Scale 0.02 mm for precise comparison Removable rubber eyecup for comfort and hygiene Precision optics that speed up inspection The instrument combines 50× magnification with a defined Ø2.0 mm field of view to make small features clearly visible while reducing the need for repeated repositioning. The calibrated 0.02 mm scale enables straightforward comparative measurements directly in the eyepiece, which speeds up routine checks and supports consistent quality control procedures. By focusing on measurable benefits — faster decision-making and fewer reject parts — the optical package improves throughput without complex setup. Designed for reliable measurements in compact spaces With a working distance of 11.7 mm and compact external dimensions (Ø41.5 × 122 mm), the device is easy to position at a workbench or inspection fixture. The measured range 0–1.6 mm suits template verification and small-part inspection tasks common in toolmaking and assembly. The compact form factor minimises workspace footprint while maintaining optical clarity, making it suitable for both shop-floor stations and light-duty inspection benches. Practical handling and operator comfort Ergonomic considerations are addressed by the removable rubber eyecup, which improves eye alignment and blocks stray light for more reliable observation; it can be removed for cleaning or for use with spectacles. The simple optical design reduces training requirements and allows staff to perform rapid checks with minimal setup. Durability-focused choices keep maintenance needs low, supporting continuous operation in busy production environments. Clear, verifiable specifications for easier procurement Key numerical values such as scaling 0.02 mm, the visible measurement range of 0–1.6 mm, and the working distance of 11.7 mm provide a verifiable basis for purchase decisions and make it straightforward to compare this instrument with alternative microscopes and measuring devices. The supplied technical data support integration into existing inspection routines and documentation for quality systems. Contact Metav Werkzeuge to discuss how the Peak template microscope can fit specific measurement tasks or to request delivery from our Emmerich stock — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance Technical data Article number: MS905.250 Brand: Peak Product: Peak template microscope Facts Magnification: 50× Field of view: Ø2.0 mm Scale / scaling: 0.02 mm Measurement range: 0–1.6 mm Working distance: 11.7 mm Dimensions: Ø41.5 × 122 mm SKU: MS905.250 Special features Removable rubber eyecup Category: Optics Compact design suitable for workshop inspection FAQ How accurate are comparative measurements with this microscope? Comparative readings with the Peak template microscope use the integrated 0.02 mm scale; this provides repeatable visual comparison suitable for template checks and small-part inspection within the stated 0–1.6 mm range. Can the eyecup be removed for cleaning or use with spectacles? Yes, the eyecup on the Peak template microscope is removable to allow hygiene cleaning or comfortable use with spectacles. What kind of tasks is this microscope best suited for? The instrument is intended for close visual inspection, template verification and small-feature checks on the shop floor where a compact optical solution with simple comparative measuring is required. Is the working distance sufficient for using small fixtures or templates? The stated working distance of 11.7 mm allows use with thin templates and small fixtures commonly employed in quality control and assembly checks. Which product ID should be quoted when ordering or enquiring? Please refer to Article number MS905.250 and the product designation Peak template microscope when contacting sales or technical staff. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø41.5x122 Template Microscope 75x With Removable Rubber Eyecup, 0.01 Scale - Peak
Take advantage of precise optical inspection, compact handling and clear scaling for reliable small-part measurement; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Peak template microscope MS905.251 — 75× optical inspection with 0.01 mm scale The Peak template microscope MS905.251 is a compact optical inspection device designed for high-detail measurement and comparison tasks in workshops and quality control stations. 75× magnification for fine detail 0.01 mm scale resolution for repeatable reads 0–1 mm measuring range for small components Removable rubber eyecup for flexible observation Compact Ø41.5 × 122 mm footprint for tight benches High-precision inspection that speeds decision-making With 75× magnification and a 0.01 mm scale, the instrument delivers the visual enlargement and graduations needed to judge features under one millimetre quickly and reliably. The combination of a defined 0–1 mm measuring range and a clear scale reduces interpretation time during routine checks and first-article inspections. For users working with fine tolerances, the optical setup gives a direct visual comparison to templates and reference marks, enabling immediate go/no-go decisions and fewer measurement cycles. Comfortable observation and practical ergonomics A working distance of 11.7 mm and a Ø1.1 mm field of view strike a balance between magnification and usability, allowing clear focus on small details without excessive operator strain. The removable rubber eyecup increases comfort during extended use and can be detached when external illumination or camera adapters are used. The narrow body (Ø41.5 × 122 mm) means the unit fits easily into crowded inspection areas, while the compact format supports fast positioning over samples and simple hand-held alignment where bench mounting is not possible. Built for workshop workflows and repeatable results Designed to integrate into routine inspection workflows, this optical device helps reduce rework by making defect detection and template comparison more straightforward. The precise scaling and optical clarity support traceable checks during assembly, maintenance or incoming goods inspection. Combined with the practicality of a small footprint, the unit is suitable for quality technicians, toolmakers and laboratory assistants who require dependable visual measurement on a daily basis. For specialist requirements, technical clarification is available to ensure the instrument matches specific inspection tasks. For procurement or technical advice regarding the Peak template microscope MS905.251, please contact Metav Werkzeuge for expert guidance and reliable delivery from Emmerich. Technical data Article number: MS905.251 Brand: Peak Product: Template microscope 75× Core specifications Magnification: 75× Scale resolution: 0.01 mm Measuring range: 0–1 mm Field of view: Ø1.1 mm Working distance: 11.7 mm Dimensions: Ø41.5 × 122 mm Features & versions Removable rubber eyecup Category: Optics Suitable for optical inspection tasks FAQ What level of detail can be inspected with this microscope? The Peak template microscope MS905.251 provides 75× magnification and a 0.01 mm scale, enabling visual inspection and comparison of features within the 0–1 mm range. Is the eyecup adjustable or removable for different users? Yes, the unit includes a removable rubber eyecup that can be taken off for alternate viewing setups or when using camera adapters. Can this device be used for routine incoming goods checks? The compact format and clear scale make the MS905.251 suited to incoming inspection and routine quality-control tasks where small-feature visibility is required. How large is the visible field at full magnification? At the specified magnification the visible field is approximately Ø1.1 mm, which supports focused inspection of small components and template comparisons. Will the microscope fit into a crowded inspection bench or carrier? The narrow body (Ø41.5 × 122 mm) is designed for tight workspaces and allows straightforward placement in compact inspection areas. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø44x20x30 Magnifier 5x Magnetic With Two Small Magnets For Secure Attachment - Peak
Take advantage of a compact inspection tool that combines 5x magnification, a Ø30 mm field of view and a secure magnetic attachment for faster quality checks and reduced handling time. Order the loupe directly via Metav Werkzeuge or consult the team for application advice. Peak Loupe MS905.210 — 5x Magnetic Inspection Loupe with Ø30 mm Field of View The Peak Loupe MS905.210 is a compact inspection loupe designed for quick visual checks in workshops and quality-control workstations, combining clear magnification with magnetic mounting for effortless positioning. 5x magnification for precise inspection Secure magnetic attachment with two magnets Compact Ø44 x 20 x 30 design for tight spaces Faster, more reliable visual checks for routine inspection The combination of 5x magnification and a Ø30 mm field of view delivers a balance between detail and context, enabling concise evaluation of solder joints, surface defects and component markings without constant refocusing. The loupe’s optical power is chosen to reveal fine details while keeping the inspected area sufficiently large to assess surroundings. In practical terms, this reduces inspection time per item and supports consistent visual quality control in repetitive production tasks, making light‑duty inspection more efficient. Magnetic mounting that frees both hands and improves workflow A key advantage of this model is its magnetic mounting: two small magnets allow secure temporary attachment to ferrous fixtures and workbenches. This feature enables hands‑free inspection when paired with a ferrous jig or metal fixture, improving ergonomics and reducing the need to hold the loupe during delicate work. The compact design also means it can be positioned in tight spaces or stored on a bench magnet rail, keeping work areas organised and minimising interruptions during small‑part assembly or finishing operations. Built for workshop use and simple integration into existing stations The loupe’s small footprint (Ø44 x 20 x 30) and low weight make it easy to add to existing inspection stations without major changes. The optical element is suited for general workshop applications where high portability and quick checks are priorities. Care is straightforward: wipe lenses with a lint‑free cloth and mild cleaner as required to maintain a clear field of view. For teams that need an affordable, durable magnifier for routine checks, this tool offers practical benefits with minimal maintenance overhead. Contact Metav Werkzeuge for stocking details and tailored advice on integrating the Peak Loupe MS905.210 into inspection stations at your facility Technical data Article number: MS905.210 Manufacturer: Peak Name: Peak Loupe 5x, magnetic Facts Dimensions: Ø44x20x30 Field of view: Ø30 Magnification: 5x Special features with two small magnets for a secure attachment Category: Optics Asset image: MS905210-main.jpg FAQ What magnification does this loupe provide? The Peak Loupe MS905.210 provides 5x magnification, suitable for detailed visual inspection while maintaining a useful viewing area. How large is the viewing area? The loupe offers a Ø30 mm field of view, which balances detail and context for common workshop checks. Is the loupe suitable for hands‑free use? Yes — the loupe includes two small magnets for secure attachment to ferrous surfaces, enabling hands‑free inspection when used with appropriate metal fixtures. Can this loupe be used for electronic component inspection? The optical power and viewing area make the loupe suitable for many electronic and small‑part inspections where moderate magnification and a clear overview are needed. How should the loupe be cleaned? Clean the lens with a soft, lint‑free cloth and a mild optical cleaner; avoid abrasive materials to preserve the optical surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø45x65 Peak Zoom Loupe 8-16x With Reticle And Template, 0.1 Scale - Peak
Take advantage of precise visual inspections with the 8–16x magnification, a 0.1 mm scale and an integrated grid and template for repeatable measurements — ideal for quality control and fine assembly tasks. Order this loupe directly via Metav Werkzeuge or consult our specialists for application advice. Peak Zoom Loupe 8–16x — optical inspection loupe with integrated measuring scale the Peak Zoom Loupe 8–16x provides variable magnification and a built-in measuring scale for detailed inspection and quick on-the-bench checks in workshops and inspection stations 8–16x variable magnification Measurement range 0–16 mm Scale increments 0.1 mm Adjustable dioptre +2.5 D to −5 D Accurate visual measurement for repeatable results The loupe combines variable magnification (8–16x) with a precise 0.1 mm scale, enabling controlled inspection of small features and rapid comparative measurement. The effective measurement range 0–16 mm and a compact field of view (Ø20–10 mm depending on zoom) make the instrument suitable for checking component edges, surface defects and printed markings. The numeric scale lets operators read small deviations without transferring parts to a bench microscope, speeding up throughput and reducing handling errors while maintaining documented traceability. Comfortable, adjustable optics reduce inspection time An integrated dioptre adjustment from +2.5 D to −5 D adapts the loupe to different eyesight conditions, lowering eye strain during longer inspection runs. The device’s compact dimensions (Ø45 x 65 mm) and clear optical path support ergonomic handling at assembly benches or inspection stations. The included grid and template simplify alignment and visual comparison, allowing repeatable placement of sample parts and faster pass/fail decisions without complex fixtures. Practical for workshop and quality assurance routines Designed for everyday use in production and quality environments, the loupe supports consistent visual checks and quick documentation. The robust optical zoom and measurable field enable straightforward defect identification and sizing on small components. Supplied information such as magnification range and scale allows integration into quality processes and inspection sheets. The product is listed as SKU MS905.197, making it easy to reference in orders and inventory systems. For precise, repeatable inspections order the Peak Zoom Loupe MS905.197 via Metav Werkzeuge or contact our Emmerich team for guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: MS905.197 Manufacturer: Peak Product name: Peak Zoom Loupe 8–16x Facts Magnification: 8–16x Scale: 0.1 mm Measurement range: 0–16 mm Field of view: Ø20–10 mm Dioptre adjustment: +2.5 D to −5 D Dimensions: Ø45 x 65 mm Special features With grid and template Category: Optics SKU: MS905.197 FAQ How accurate are measurements taken with this loupe? Measurements use the built-in 0.1 mm scale; the loupe provides reliable, quick visual sizing suitable for routine inspection and comparative checks with the Peak Zoom Loupe MS905.197. Can the magnification be adjusted while inspecting a part? Yes, the zoom range of 8–16x allows continuous adjustment to focus on different feature sizes during inspection without changing instruments. Is the loupe suitable for users who wear glasses? The dioptre adjustment (+2.5 D to −5 D) allows personal visual correction, so the instrument can be adapted for use with many eyesight conditions when using the Peak Zoom Loupe. What is the effective field of view at different magnifications? The visual field ranges approximately from Ø20 mm to Ø10 mm depending on the selected magnification, providing a balance between overview and detail. How should the product be referenced in inventory or orders? Use the SKU MS905.197 and the designation Peak Zoom Loupe 8–16x for clear identification in purchase orders and stock lists. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø55x53 Precision Magnifying Loupe 7x 0.1mm Scaling, Ø41 Field - Peak
Benefit from distortion-free measurement with a 7x magnification and an anastigmatic lens, combined with a compact Ø55×53 mm format and an ample Ø41 mm field of view for efficient film inspection; order the loupe directly via Metav Werkzeuge or consult our specialists for tailored advice. Peak measuring loupe MS905.400 — 7x anastigmatic lens, compact Ø55×53 mm The Peak measuring loupe MS905.400 is a compact 7x inspection instrument designed for precise measurements and the visual inspection of photographic film in optical and workshop settings. 7x magnification for precise inspection Anastigmatic lens for distortion-free image Ø41 mm field of view for larger coverage Scale 0.1 mm with 0–36 mm measuring range Precision optics that deliver repeatable measurement results The combination of 7x magnification and an anastigmatic lens ensures a sharp, distortion-free image across the viewing area, which directly improves repeatability in routine checks. The loupe’s 0.1 mm scale and 0–36 mm measuring range allow for reliable readings on small features and film edges; the Ø41 mm field of view reduces the need for frequent repositioning during inspection. For users unfamiliar with the term, an anastigmatic lens corrects spherical and chromatic aberrations so that straight edges and fine details appear true to form — a practical advantage when comparing measurements against drawings or tolerances. Compact design that speeds up inspection workflows A compact Ø55×53 mm footprint makes this inspection loupe easy to manoeuvre and quick to position over samples, which supports faster throughput in quality control and photographic work. The clear inspection loupe view facilitates rapid assessment of film and other flat media without sacrificing accuracy, while the robust scale integration simplifies transfer of visual observations into measurement records. Designed for bench-top use, the instrument aids technicians and photographers who require consistent visual verification without complex setup. Professional handling and support for daily use Built for routine use, the loupe balances optical performance with straightforward handling to reduce operator fatigue and minimise measurement uncertainty. The film inspection capability is particularly relevant in imaging labs, reprographics and archival work where detailed visual checks are frequent. Metav’s approach to supplying precision tools emphasises dependable availability and industry-grade selection, supporting workshops and small labs with convenient access to calibrated instruments and sensible logistics. Contact Metav Werkzeuge for personalised advice on the Peak measuring loupe MS905.400 and secure precision optics that suit the workshop’s measurement needs Technical Data Article number: MS905.400 Product name: Peak measuring loupe Magnification: 7x Lens type: anastigmatic Dimensions: Ø55×53 mm Field of view: Ø41 mm Scale: 0.1 mm Measuring range: 0–36 mm Suitable for: photographic film inspection Facts Magnification: 7x Field of view: Ø41 mm Scale resolution: 0.1 mm Measuring range: 0–36 mm Dimensions: Ø55×53 mm Special features Anastigmatic lens Suitable for photographic film inspection Category: Optik SKU: MS905.400 FAQ Is the loupe suitable for measuring on photographic film? Yes. The Peak measuring loupe MS905.400 is specified for the inspection of photographic film and provides a clear view and a 0.1 mm scale for visual measurement. Can the loupe replace a precision caliper for small measurements? The loupe complements calipers by enabling visual measurement and quick checks; the 0–36 mm measuring range and 0.1 mm scale support fast verification rather than substitute for high-accuracy caliper readings. What does an anastigmatic lens mean in practical terms? An anastigmatic lens, as fitted to this loupe, minimises distortion and colour fringing so edges and details appear true, improving visual accuracy during inspection. Is the field of view large enough for strip or frame inspection? The Ø41 mm field of view provides ample coverage for many film frames and strips, reducing the need for frequent repositioning during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø60mm Hand Magnifier 5× Magnification Metal Frame - Metav IndustryLine
Taking advantage of a 60 mm lens and 5× magnification ensures dependable close-up inspection with a comfortable working distance, while the robust metal frame keeps the tool aligned during repeated checks; order the magnifier directly via Metav Werkzeuge or consult our technical advisers for specification support. Metav IndustryLine Hand magnifier M503.131 — 60 mm lens, 5× magnification A compact inspection tool, the Hand magnifier M503.131 is designed for precise visual checks in workshops, inspection benches and quality-control stations. 60 mm glass lens for clear magnification 5× magnification for detailed inspection Metal frame for robust workshop use Wide, clear view for faster defect detection The large 60 mm lens offers a broader field of view than smaller hand lenses, making it easier to scan surfaces and components without constant repositioning. With 5× magnification, small features such as fine threads, solder joints or print defects become visibly distinct while retaining a practical working distance. This balance between magnification and field size improves inspection throughput and reduces the need for repeated handling, contributing to a more efficient quality routine and fewer reworks. Durable design that keeps measurements repeatable A metal frame provides structural stability and resists everyday workshop wear, which helps maintain optical alignment over time. At approximately 0.1 kg, the device is notably lightweight, reducing operator fatigue during prolonged use and allowing for precise manual guidance. The construction supports routine visual inspection tasks where a stable hand lens is required, ensuring consistent observation quality across multiple shifts and operators. Practical use cases and integration into the workflow The magnifier is suited to electronics assembly, watch and jewellery inspection, prototyping and general workshop QC where a portable optical aid accelerates decision-making. As a straightforward inspection accessory, it complements microscopes and measuring tools by offering immediate, handheld visual verification. The product’s simple concept delivers a pragmatic increase in detection capability without introducing complex calibration procedures or lengthy setup routines. For clear, dependable visual checks, order the Metav IndustryLine Hand magnifier M503.131 from Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice. Technical Data SKU: M503.131 GTIN: 4054469144627 ECLASS: 21170614 Tariff number: 90138090 Facts Lens diameter: 60 mm Magnification: 5× (5 dioptre) Weight: 0.1 kg Special features Material: metal frame Category: Optik Compact, handheld design FAQ What magnification does the lens provide? The Hand magnifier M503.131 provides 5× magnification (5 dioptre), suitable for detailed visual inspection while maintaining a usable working distance. Is the lens diameter suitable for scanning larger areas? Yes, the 60 mm lens offers a wider field of view than smaller hand lenses, making surface scanning and component checks quicker and less fiddly. Can the magnifier withstand workshop use? The device features a metal frame, which enhances robustness and helps maintain optical alignment under regular workshop conditions. Is the magnifier suitable for electronics inspection? The Hand magnifier M503.131 is well suited to electronics assembly and solder-joint inspection, providing clear enlargement for visual verification tasks. Does the product include any calibration certificate? No calibration certificate is indicated for this optical magnifier; it is a ready-to-use inspection tool intended for visual checks and not for calibrated dimensional measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø75mm Hand Magnifier 3× Glass Lens Metal Frame - Metav IndustryLine
Take advantage of a compact inspection solution that combines 3× magnification, a Ø75 mm lens and a robust metal frame for reliable visual checks and quality control. Order directly via Metav Werkzeuge or request advice from our consultants to ensure the right optics for the task. Hand magnifier M503.132 – 75 mm Ø lens, 3× magnification (Metav IndustryLine) The Hand magnifier M503.132 is a compact inspection lens designed for close visual work and quality checks across electronics, watchmaking and general workshop use. Ø75 mm lens for wide field of view 3× magnification for clear detail enlargement Metal frame for durable, workshop-ready handling Extremely lightweight at approx. 0.1 kg Clear, measurable enlargement for efficient inspection The large 75 mm lens delivers a broad viewing area while the 3× magnification provides a practical enlargement that speeds up routine inspections without excessive image distortion. For production and quality-control tasks, this combination reduces the need for repeated handling and supports faster decision-making at the workstation. The optical design focuses on even illumination and a stable focal distance, helping to maintain consistent results when examining serial numbers, circuit traces or fine mechanical parts. Durable construction that stands up to daily use A metal frame gives the instrument a solid feel and improves resilience against knocks and frequent handling compared with plastic-bodied alternatives. Weighing around 0.1 kg, the tool remains comfortably portable and easy to manoeuvre for prolonged use, while the metal surround ensures the lens stays securely seated. This balance of durability and low weight supports repetitive inspection cycles in workshops and inspection benches, making the lens a dependable tool for routine tasks. Practical handling, storage and application benefits The magnifier’s combination of a wide lens and modest magnification makes it versatile for both detailed inspection and general visual assistance. Its compact footprint and light mass simplify storage and transport between workstations or on-site checks. Suitable applications include electronics inspection, watch and jewellery repair, print and label verification, and any small-part quality control where clear, repeatable visual assessment is required. The design minimises operator fatigue and supports consistent inspection throughput. For reliable workshop optics from Metav IndustryLine, contact Metav Werkzeuge to discuss the M503.132 with its Ø75 mm lens and 3× magnification and to arrange delivery from our Emmerich facility Technical data SKU: M503.132 GTIN: 4054469144634 Customs tariff number: 90138090 Facts Lens diameter: Ø75 mm Magnification: 3× (3 dioptres) Weight: 0.1 kg Materials & features Frame: metal Category: Optics eCl@ss: 21170614 FAQ What level of magnification does the magnifier provide? The hand magnifier offers 3× magnification, which is suitable for general inspection tasks and detailed visual checks. Is the lens suitable for electronics and watchmaking inspections? Yes, the combination of a Ø75 mm lens and 3× enlargement makes the device well suited to electronics, watchmaking and similar precision inspection tasks. How heavy is the instrument and is it comfortable to hold? The magnifier weighs approximately 0.1 kg, delivering a light, well-balanced feel that reduces fatigue during repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø7mm Peak Standard Template Single - Peak
A compact, single-piece optical reference with a 7 mm aperture, the Peak standard template delivers a consistent visual datum for routine inspection and alignment; order the item directly via Metav Werkzeuge or consult the team for application advice. Peak standard template — optical template with 7 mm aperture A Peak standard template for optical inspection and alignment, supplied as a single unit with a precise 7 mm aperture Precision aperture 7 mm Single unit delivery For optical inspection and alignment Consistent reference for quicker inspection decisions A calibrated aperture provides a clear, repeatable visual reference that supports faster acceptance checks and alignment tasks. The 7 mm aperture functions as a stable datum in optical workflows, reducing variability that can arise from ad hoc gauging. For production environments where visual standards must be applied repeatedly, the aperture template helps standardise inspection routines and speeds up setup and cross-checks between stations. Emphasis on a simple, unambiguous reference enhances traceability in everyday inspection tasks. Practical handling that integrates into existing processes Delivered as a single unit, the template is compact and intended for immediate use in bench-top or assembly-line checks. Its form factor simplifies storage and retrieval in common inspection kits, keeping the instrument readily accessible during short measurement cycles. The straightforward nature of the item minimises training overhead and supports lean handling practices: introduce the template into existing SOPs with minimal disturbance and maintain consistent visual criteria across operators and shifts. Supports a range of optical quality-control tasks The aperture template is suitable for routine tasks such as alignment verification, comparative visual assessment and basic lens or fixture positioning in optical assemblies. By offering a clear, repeatable aperture, the tool contributes to quality control measures without requiring specialised measuring instruments. When visual conformity and positional consistency are the objective, the template reduces ambiguous judgements and can be used in combination with microscopes, cameras or manual inspection benches as an objective reference point. Sourcing that prioritises dependable supply and industry expertise Choosing this optical template via an experienced supplier adds value beyond the item itself: consistent availability and a thoughtful product assortment simplify procurement and reduce lead-time risk. Metav’s approach to precision—combining a broad catalogue with regional fulfilment—supports continuity of supply and pragmatic purchasing for workshops and industry alike. The practical benefit is a reliable reference tool that fits into established inspection chains and contributes to steady, repeatable results on the shop floor. For standardised optical checks, request the Peak standard template (MS905.286) from Metav Werkzeuge; Metav’s team can advise on integration and availability — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: MS905.286 Brand: Peak Name: Peak standard template Variant: single, Ø7 mm Category: Optik Facts Diameter: 7 mm Image file size: 207200 bytes Special features Single unit delivery Optical reference template Image asset available FAQ What is the aperture size of the template? The aperture measures 7 mm and is stated on the technical data for the Peak standard template (MS905.286). How is the product supplied? The item is supplied as a single unit, indicated by the variant description for the Peak standard template. What applications suit this template? The template is intended for optical inspection tasks such as alignment checks, comparative visual assessments and basic positioning during assembly. Is the template compatible with visual inspection setups? Yes; the template serves as a repeatable visual datum and can be used alongside microscopes, cameras and bench-top inspection fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø80x170 Magnifier 2.5-5x Lens-in-Lens Construction Ø75 View Field - Peak
Take advantage of the lens‑in‑lens construction and wide Ø75 mm field of view to speed up visual inspections without frequent repositioning; the compact Ø80×170 format keeps the workbench uncluttered. Order the Peak magnifier directly via Metav Werkzeuge or consult our technical advisors for integration into production workflows. Peak 2.5–5× Magnifier MS905.214 — Lens‑in‑Lens Optics A practical magnifier for inspection and assembly tasks, the Peak 2.5–5× magnifier combines a wide viewing area with a compact housing for workshop and laboratory use Lens‑in‑lens construction for sharp detail Wide Ø75 mm viewing field for quick overview Compact Ø80×170 format for bench use Two‑step magnification 2.5× and 5× Faster inspections with clear optics The magnifier's lens‑in‑lens construction delivers a layered optical system that reduces aberrations and keeps edges crisp across the viewing area. With 2.5× as the standard setting and a secondary 5× option, the device enables both general inspection and closer examination without changing tools. The Ø75 mm viewing field (secondary Ø20 mm at higher power) cuts the need for constant repositioning, so repetitive visual checks become measurably quicker. This translates into lower cycle times in assembly and quality control routines while preserving visual comfort. Compact design that fits the workflow At Ø80×170 mm, the magnifier occupies little bench space yet offers a stable platform for handheld or clamped use. The compact format makes storage in tool trolleys straightforward and keeps the workplace organised, which supports faster throughput in production environments. The construction balances field coverage and magnification to reduce the number of device swaps during multi‑stage inspections. The simplified handling lowers the cognitive load for operators and improves consistency in routine visual tasks. Practical applications and user benefits Designed for visual inspection, assembly and maintenance, the device is suited to small parts inspection in workshops, watchmaking, electronics or quality control stations. The two magnification levels provide flexibility: use 2.5× for a quick overview of surface features and solder joints, and switch to 5× for precise examination of fine details. The clear visual advantages contribute to fewer inspection errors and faster issue detection, supporting a more reliable production flow and higher first‑pass yield. Contact Metav Werkzeuge for procurement advice on the Peak magnifier with lens‑in‑lens optics; technical consultants can advise on application fit and delivery from our Emmerich stock — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.214 Brand: Peak Designation: Peak magnifier 2.5–5× Facts Dimensions: Ø80 x 170 mm Viewing field: Ø75 mm (Ø20 mm) Diameter: 75 mm Magnification: 2.5× (5×) Special features Lens‑in‑lens construction Category: Optics Compact format for bench and trolley use FAQ What magnification levels does the magnifier offer? The Peak magnifier provides 2.5× as the main magnification with a secondary 5× option for close inspection of fine detail. How large is the usable viewing area? The device delivers a wide Ø75 mm viewing field for overview inspections and a reduced Ø20 mm field at the higher magnification setting. Is the magnifier suitable for industrial inspection tasks? Yes, the optical design and compact format make the Peak magnifier suitable for workshop and quality control applications where rapid, repeatable visual checks are required. Can this magnifier replace a microscope for routine checks? For quick visual checks and assembly inspections the magnifier offers significant speed and convenience; it is not intended to replace microscopes for extreme high‑magnification analysis. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø8mm Monocular Telescope 2x Magnification 11° Angle Ø22.5x50 Field 12Ø/mm, 192Ø/m - Peak
Take advantage of the compact optical performance and easy handling of this monocular: the combination of 2x magnification and a Ø8 mm lens ensures quick visual checks with a clear field of view, while Metav Werkzeuge provides reliable supply and technical advice for seamless integration into workshop workflows. Peak monocular telescope MS905.207 — 2x magnification, Ø8 mm lens Peak monocular MS905.207 is a compact inspection telescope designed for quick visual checks in workshops, field inspections and quality control tasks Peak monocular MS905.207 with 2x magnification Ø8 mm lens for compact optical design Field of view 12Ø/mm and 192Ø/m Clear results for fast inspection and control The 2x magnification combined with the Ø8 mm lens provides a direct, undistorted view that is ideal for rapid visual assessment. The stated field of view (12Ø/mm and 192Ø/m) translates into a wide observable area at low magnification, reducing the need to reframe the target repeatedly. For technical users, this means fewer interruptions during routine checks and a more efficient inspection process. The instrument’s optical arrangement focuses on contrast and clarity rather than high magnification, which benefits applications where context and surrounding detail are as important as close detail. Compact handling suited to workshop and on-site tasks With overall dimensions of Ø22.5 x 50 mm, the instrument is small enough for one-handed use and fits comfortably in a pocket or tool pouch. The modest 11 viewing angle supports a natural hand posture, reducing strain during repeated use. A near-focus point of 100 enables closer visual work than typical low-power optics, making small components easier to examine without additional equipment. The compact design is especially helpful when space is limited or when rapid transitions between inspection points are required. Practical use cases and professional relevance The monocular is particularly suitable for technicians, maintenance personnel and quality inspectors who need a portable optical aid for assembly checks, surface inspections and quick alignment tasks. Its low magnification keeps orientation and spatial relationships intact, which is useful when evaluating fit, surface defects or thread engagement. The instrument complements a set of precision tools by providing an immediate visual reference without the setup time of larger optical devices. Supply assurance and easy integration into workflows Sourcing this monocular through Metav Werkzeuge brings the benefit of a robust European supply chain and long-term availability. Metav’s experience in precision measurement and workshop equipment ensures that components arrive reliably and are supported by clear information and expert advice. For procurement teams, the compact optical tool offers an uncomplicated addition to standard inspection kits and reduces the need to consult multiple suppliers for small but essential visual aids. Contact Metav Werkzeuge for tailored advice on integrating the Peak MS905.207 into workshop inspection routines and to confirm availability for your next order Technical Data Article number: MS905.207 Product: Peak monocular telescope Brand: Peak Lens diameter: Ø8 mm Magnification: 2x Dimensions: Ø22.5 x 50 mm Field of view: 12Ø/mm and 192Ø/m Viewing angle: 11 Near focus: 100 Category: Optik Facts Magnification: 2x Lens diameter: 8 mm Dimensions (Ø x L): Ø22.5 x 50 mm Field of view specification: 12Ø/mm and 192Ø/m Viewing angle value: 11 Near-focus value: 100 Features Monocular telescope for handheld inspection SKU: MS905.207 Portable, compact design Intended for workshop and field visual checks FAQ What magnification does this monocular offer? The Peak monocular MS905.207 provides a 2x magnification level, designed for quick overview inspections and context-rich observation. How wide is the instrument’s viewing area? The optical specification for the instrument lists a field of view of 12Ø/mm and 192Ø/m, which indicates a broad observable area at the stated magnification. Is the monocular suitable for close-up checks? Yes; the Peak MS905.207 has a near-focus value of 100, enabling closer visual inspection than many low-power optics. What makes the MS905.207 practical for workshop use? Its compact dimensions (Ø22.5 x 50 mm) and ergonomic viewing arrangement allow easy one-handed operation and quick transitions between inspection points, making it well suited to maintenance and assembly tasks. Is this instrument portable for field inspections? The small form factor of the Peak monocular MS905.207 supports pocket carry and rapid deployment in field and site environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
inspect faster and with greater certainty using magnifiers
Magnifiers (also known as loupe and magnifying glass) are optical instruments that render small objects and surface details visibly larger, producing a virtual, upright image through a converging lens. In metallography and industrial quality assurance they represent the first stage of optical inspection, offering a fast, reliable check before more detailed analysis with microscopes.
how magnifiers work and where they belong in the workflow
A magnifier’s enlargement is determined mainly by the focal length of its lens: the shorter the focal length, the higher the achievable magnification. Typical workshop types include the hand magnifier for quick surface checks, the folding or inspection magnifier for stable close-up work at the bench, the measuring magnifier with an integrated reticle for direct dimension checks, and the stand magnifier for fatigue-free, repeatable inspection at a fixed working distance. In practice they are indispensable for spotting hairline cracks, corrosion, tiny burrs and for reading fine engravings on components.
practical advantages that improve production throughput
- Rapid first-pass inspection, reducing time sent to downstream process steps and avoiding unnecessary rework.
- Direct measurement capability with measuring magnifiers, enabling quick quantitative checks without switching tools.
- Stable positioning with stand magnifiers, lowering operator fatigue and increasing repeatability.
- Compact, portable options (hand and folding magnifiers) for in-situ checks on assemblies or machines.
- Simple optical design: robust, low-maintenance tools that complement microscopes for layered inspection strategies.
why choose metav as your precision partner
Metav democratises precision by making high-quality measuring tools affordable for every workshop. From our base in Emmerich we act as a quality filter for the European market, supplying over 250,000 products and trusted by more than 48,000 customers. That breadth ensures you can reduce supplier complexity while sourcing the right magnifiers — from portable hand lenses to calibrated measuring models — backed by a consistent supply chain and industrial expertise.
In short, magnifiers provide immediate, reliable optical inspection for workshop and production environments, combining simplicity with measurable time and quality benefits.
faq
What types of magnifiers are commonly used in metal inspection?
Common types used in metal inspection include the hand magnifier for quick checks, the folding or inspection magnifier for close work, the measuring magnifier with reticle for dimension assessment, and the stand magnifier for prolonged, stable inspection.
How does magnification relate to focal length?
Magnification is primarily governed by the focal length of the lens: a shorter focal length results in higher magnification, which determines how much larger the virtual, upright image appears compared with the naked eye.
Can magnifiers replace microscopes for quality assurance?
Magnifiers are intended as a first-line optical inspection tool; they are ideal for rapid checks and measurements but do not replace detailed analysis performed with microscopes, which are required for higher-magnification examination and microstructural evaluation.
Are measuring magnifiers suitable for quantitative checks on welds and cracks?
Yes. Measuring magnifiers with an integrated reticle or scale enable direct, quantitative assessment of features such as crack widths, groove depths or small weld defects, speeding up in-process decisions.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com