Wissenswertes über Messwerkzeuge

Geeignet für die erhöhten hygienischen Anforderungen in der NahrungsmittelindustrieUnterstützt Sie in Ihrem HACCP-konformen QualitätssystemStaub- und Spritzwasserschutz IP65 (nur im Akkubetrieb)Sehr schnelle Anzeige: stabile Wägewerte innerhalb von ca. 2 sZweitanzeige an der WaagenrückseiteKompakte Abmessungen, vorteilhaft bei eingeschränkten PlatzverhältnissenInnovatives Wiegen mit Toleranzbereich (Checkweighing): Die Farbe des Displays wechselt je nach Wägeergebnis (zu leicht/ok/ zu schwer) und unterstützt so das Portionieren, Dosieren und SortierenHohe Mobilität: Dank Akkubetrieb (optional) und kompakter, leichter Bauweise geeignet zum Einsatz an mehreren StandortenGriffmulden an der Unterseite zum bequemen Transport der WaageArbeitsschutzhaube im Lieferumfang enthaltenAblesbarkeit:Wägebereich 1,5kg: 0,2g (eichfähig: 0,5g)Wägebereich 3kg: 0,5g (eichfähig: 1g)Wägebereich 6kg: 1g  (eichfähig: 2g)Wägebereich 15kg: 2g (eichfähig: 5g)Wägebereich 25kg: 5g  (eichfähig: 10g)Großes hinterleuchtetes LCD-Display, Ziffernhöhe 25 mmAbmessungen Wägeplatte, Edelstahl, 260 x 200 mmGesamtabmessungen 285 x 315 x 128 mmNettogewicht ca. 3,2 kgZulässiger Umgebungstemperaturbereich -10 °C/40 °CHinweis: Für eichpflichtige Anwendung Eichung bitte gleich mitbestellen, eine nachträgliche Ersteichung ist nicht möglich. Für die Eichung benötigen wir die vollständige Adresse des Aufstellungsortes

Geeignet für die erhöhten hygienischen Anforderungen in der NahrungsmittelindustrieUnterstützt Sie in Ihrem HACCP-konformen QualitätssystemStaub- und Spritzwasserschutz IP65 (nur im Akkubetrieb)Sehr schnelle Anzeige: stabile Wägewerte innerhalb von ca. 2 sZweitanzeige an der WaagenrückseiteKompakte Abmessungen, vorteilhaft bei eingeschränkten PlatzverhältnissenInnovatives Wiegen mit Toleranzbereich (Checkweighing): Die Farbe des Displays wechselt je nach Wägeergebnis (zu leicht/ok/ zu schwer) und unterstützt so das Portionieren, Dosieren und SortierenHohe Mobilität: Dank Akkubetrieb (optional) und kompakter, leichter Bauweise geeignet zum Einsatz an mehreren StandortenGriffmulden an der Unterseite zum bequemen Transport der WaageArbeitsschutzhaube im Lieferumfang enthaltenAblesbarkeit:Wägebereich 1,5kg: 0,2g (eichfähig: 0,5g)Wägebereich 3kg: 0,5g (eichfähig: 1g)Wägebereich 6kg: 1g  (eichfähig: 2g)Wägebereich 15kg: 2g (eichfähig: 5g)Wägebereich 25kg: 5g  (eichfähig: 10g)Großes hinterleuchtetes LCD-Display, Ziffernhöhe 25 mmAbmessungen Wägeplatte, Edelstahl, 260 x 200 mmGesamtabmessungen 285 x 315 x 128 mmNettogewicht ca. 3,2 kgZulässiger Umgebungstemperaturbereich -10 °C/40 °CHinweis: Für eichpflichtige Anwendung Eichung bitte gleich mitbestellen, eine nachträgliche Ersteichung ist nicht möglich. Für die Eichung benötigen wir die vollständige Adresse des Aufstellungsortes

Geeignet für die erhöhten hygienischen Anforderungen in der NahrungsmittelindustrieUnterstützt Sie in Ihrem HACCP-konformen QualitätssystemStaub- und Spritzwasserschutz IP65 (nur im Akkubetrieb)Sehr schnelle Anzeige: stabile Wägewerte innerhalb von ca. 2 sZweitanzeige an der WaagenrückseiteKompakte Abmessungen, vorteilhaft bei eingeschränkten PlatzverhältnissenInnovatives Wiegen mit Toleranzbereich (Checkweighing): Die Farbe des Displays wechselt je nach Wägeergebnis (zu leicht/ok/ zu schwer) und unterstützt so das Portionieren, Dosieren und SortierenHohe Mobilität: Dank Akkubetrieb (optional) und kompakter, leichter Bauweise geeignet zum Einsatz an mehreren StandortenGriffmulden an der Unterseite zum bequemen Transport der WaageArbeitsschutzhaube im Lieferumfang enthaltenAblesbarkeit:Wägebereich 1,5kg: 0,2g (eichfähig: 0,5g)Wägebereich 3kg: 0,5g (eichfähig: 1g)Wägebereich 6kg: 1g  (eichfähig: 2g)Wägebereich 15kg: 2g (eichfähig: 5g)Wägebereich 25kg: 5g  (eichfähig: 10g)Großes hinterleuchtetes LCD-Display, Ziffernhöhe 25 mmAbmessungen Wägeplatte, Edelstahl, 260 x 200 mmGesamtabmessungen 285 x 315 x 128 mmNettogewicht ca. 3,2 kgZulässiger Umgebungstemperaturbereich -10 °C/40 °CHinweis: Für eichpflichtige Anwendung Eichung bitte gleich mitbestellen, eine nachträgliche Ersteichung ist nicht möglich. Für die Eichung benötigen wir die vollständige Adresse des Aufstellungsortes

KERN Bench scale mit zweitanzeige an der Waagenrückseite, Technical Data: and Detail Information:Manufacturer: KERNModel: Bench scaleReadout: 0,1 g - 2 gOrder now Bench scale Online.

Combine ISO 286‑2 compatibility with an instant lookup of more than 6,400 tolerance values for reliable design decisions and consistent inspection results — order the Tolerance table directly via Metav Werkzeuge or contact our consultants for tailored advice. Tolerance table — ISO 286‑2 reference chart (up to 500 mm) by Filetta The Tolerance table is a compact reference chart for immediate reading of tolerance values and fits according to ISO 286‑2, intended for engineering, quality control and workshop use. ISO 286‑2 compatibility up to 500 mm Over 6,400 tolerance entries Immediate reading for fits and tolerances Suitable for internal and external dimensions Faster decisions with standardised tolerance data The reference matrix provides a single, standardised source for clearance, transition and interference fits, reducing time spent searching dispersed tables. With direct mapping to ISO 286‑2 and coverage to 500 mm, the chart supports rapid verification of nominal sizes and tolerances, enabling engineers to confirm fit classes and tolerance zones without complex calculations. The compact presentation of tolerance values accelerates decision-making in design reviews and first-off inspections. Clear guidance for assemblies and inspection routines Presented as an immediate-reading table, the chart removes ambiguity when selecting shaft and hole tolerances for bearings, housings or shafts. The organised layout helps translate ISO class designations into usable limits for production and QC, so tolerance checks can be executed consistently on the shop floor. Where traceable documentation is needed, the dataset of 6,400+ entries serves as a reliable reference for specifying fits in drawings and inspection protocols. Practical benefits for workshops and design offices Adopting a single reference chart reduces errors caused by cross-referencing multiple sources and supports faster training of technicians and junior engineers. The concise format is optimised for routine tasks — from tolerance verification during assembly to prepare-for-inspection checks — and complements digital workflows where a human-readable standard is required alongside CAD and measurement reports. The association with Filetta denotes a focused tool for metrology professionals who value clarity and compliance. For standards-compliant tolerance reference and rapid integration into inspection routines, request the Filetta Tolerance table from Metav Werkzeuge today — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications. Technical Data Article number: MS835.163 Name: Tolerance table Brand: Filetta Label: Toleranztabelle Facts Standard: ISO 286‑2 Scope: up to 500 mm Entries: >6,400 tolerance values Special features Immediate-reading table of tolerance values and fits Includes internal and external dimensions Data suited to engineering and workshop reference FAQ What standard does this reference follow? The Filetta Tolerance table follows ISO 286‑2, providing standardised tolerance classes and zones for engineering use. Up to which nominal size are tolerance values provided? The chart covers nominal sizes up to 500 mm, with entries for both internal and external dimensions. How extensive is the dataset included in the chart? The reference contains more than 6,400 tolerance values for quickly determining fits and limits. Is this chart suitable for shop‑floor inspection tasks? Yes — the immediate‑reading format makes the chart suitable for routine inspection, assembly checks and specification clarification in the workshop. Can the table help when specifying fits on technical drawings? The dataset translates ISO class designations into practical limit values, supporting clear specification of fits and tolerances on drawings. Filetta: Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Stereo Mikroskop for precise measurements in the range 0mm to 0mm. The so-called monobloc, which is the vernier, is made from one piece. External, internal, depth and step measurements can be carried out with calip Stereo Mikroskop.Available in the following versions:| Article number | | | | ||Summary and technical data for on Metav IndustryLine caliper Stereo MikroskopManufacturer: Metav IndustryLineModel: Stereo MikroskopRange: 0mm - 0mmAccuracy:SpindleWorking distance: 105Working surface: ⌀ 95Collet: 76Throat depth: 140 mmSpecial features: Speziell entwickelt für anspruchvolle Anwendung in Ausbildung, Labor und IndustrieAdjustment of dioptres: ±6Adjustable ocular distance: 52-76mmSetting standard:Focal area: 50Base: 292x283Power: 6V/10W+220V/5WLight: regelbares halogen Auflicht und Durchlicht Fluoreszenz LampeTempered lensMikroscope head: 45⁰ Schrägeinblick, um 360⁰ drehbarColumn: Ø25x240 mmAccessories included: Mit Okular SWH10Order now Stereo Mikroskop Online.

USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.

Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Design details indexable inserts VBGW 110306 from MetavCUT Brand: MetavCUT Manufacturer Order Number: VBGW110306-CBN-Steel Figures for the tool: ISO-Code: VBGW110306 Clearance Angle: 5° Angle: 35° Thickness: 3,18mm Radius: 0.6 Features Material: CBN Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: without Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-VBGW-110306-Stahl-MetavCUT 40END

Technical Data:Manufacturer:Model:

Take advantage of the combination of ultra-fine resolution, a compact carbide probe tip and a rotatable digital display for reliable, repeatable small-range measurements; the device arrives ready for workshop use in a transport case. Order the Digital Fine Probe directly via Metav Werkzeuge or ask our consultants if needed. Digital Fine Probe M208.003.1 — compact digital probe with 0.001 mm resolution (Metav IndustryLine) The Digital Fine Probe M208.003.1 is a compact digital displacement probe intended for high-resolution comparative measurements and setup tasks in inspection and workshop environments 0.001 mm resolution readout ±0.5 mm measuring range Carbide ball probe Ø2 mm Rotatable digital display with run bar Exceptional metrological performance for small-range inspections The finely tuned measurement chain delivers a resolution of 0.001 mm combined with a specified accuracy of 0.02 mm, making the instrument suitable for precision checking of small features and positional adjustments. The limited measuring range of ±0.5 mm is deliberately matched to tasks where short-travel, low‑compliance sensing gives the best reproducibility; this translates directly into faster setup checks and fewer reworks on production or inspection benches. The data‑centred design emphasises measurable benefits: consistent repeatability and clear numerical evidence for quality control decisions. Fast, intuitive operation to reduce cycle time Operation is simplified by a rotatable digital display with MODE, SET and DATA keys and a visual run bar, allowing readings to be oriented to the operator and logged when required. Multiple measurement modes (standard, maximum, minimum and difference) provide immediate analytical value without additional calculation steps, and the automatic reversal of measuring direction prevents misreads when the probe motion changes. The probe head is equipped with a carbide ball of Ø2 mm for reliable contact with small radii and delicate surfaces, enabling precise point contact with minimal marking and excellent wear resistance. Robust packaging and workshop applicability With a compact probe length of 15 mm and a construction optimised for repeated tactile use, the instrument integrates well into bench fixtures and test rigs while remaining easy to handle during manual checks. Delivery includes a secure transport case for safe handling between job sites and storage, which preserves instrument alignment during transit. Supplied by Metav Werkzeuge, the unit is aimed at workshops and inspection labs seeking high-resolution diagnostic capability without complex integration—an accessible precision tool that supports efficient quality workflows. For workshop-ready high-resolution checks, request the Digital Fine Probe M208.003.1 from Metav Werkzeuge and discuss system suitability with our consultants via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M208.003.1 GTIN: 4061905053573 Eclass: 21170333 Label: Digital fine probe, ±0.5 mm, 0.001 mm reading Facts Measuring range: ±0.5 mm Resolution: 0.001 mm Accuracy: 0.02 mm Length: 15 mm Digital: yes Special features Digital display with MODE, SET and DATA keys and run bar, freely rotatable Probe tip fitted with carbide ball Ø2 mm Measurement modes: standard, maximum, minimum, difference Automatic reversal of measuring direction Supplied in a transport case FAQ What is the smallest increment the probe will show? The display on the Digital Fine Probe M208.003.1 indicates increments of 0.001 mm, suitable for fine comparative measurements. Which measurement modes are available on the instrument? The unit supports standard, maximum, minimum and difference modes, enabling immediate on‑screen comparison without external calculation for the M208.003.1. Is the probe tip suitable for small radii and delicate surfaces? Yes — the probe is supplied with a carbide ball probe of Ø2 mm, providing reliable point contact with good wear resistance for small features. Can the readout be oriented for different working positions? The rotatable digital display with MODE/SET/DATA keys and a run bar allows the readout to be turned for ergonomic viewing and convenient logging. Does the delivery include protective packaging for transport? The instrument is supplied in a secure transport case to protect alignment during handling and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, wear-resistant marking performance from a hardened tip and a slim shank ensures repeatable results in routine workshop marking; the HSS construction and ø 5 x 20 mm profile combine durability with easy mounting. Order the replacement part directly via Metav Werkzeuge or contact the consultants for application advice. Scribing Needle M240.151.A1 – HSS, ø 5 x 20 mm (Metav IndustryLine) A scribing needle M240.151.A1 designed as a hardened high-speed steel marking tip for reliable metal scribing and simple integration into compatible holders. Durable HSS marking tip Precise ø 5 x 20 mm shank For 240.151-compatible holders Marking accuracy that stays consistent The hardened HSS tip delivers a reliable edge geometry that maintains sharpness under frequent use, reducing the need for early replacement. This means clearer centre lines and reference marks on metal components, which supports reproducible setup and faster downstream processing. The compact ø 5 x 20 mm format keeps the mass low and the centre of gravity close to the holder, improving handling and minimising unintentional deflection during scribing. Robust design for everyday workshop use A solid shank diameter of 5 mm with a 20 mm engagement length provides a stable clamping zone and simple fitment into standard holders. The high-speed steel composition balances toughness and hardness for marking a range of ferrous materials while resisting chipping in normal shop conditions. The compact construction makes replacement straightforward, so production downtime is reduced and toolroom logistics remain efficient. Easy identification and traceability for parts management Small weight and clear identifiers simplify inventory handling: the article is listed under SKU M240.151.A1 and GTIN is available for procurement systems. The modest form factor keeps stores tidy and allows quick swaps on marking fixtures, supporting lean workshop routines. Documentation and image resources are provided for rapid verification before installation, helping to maintain process consistency. For reliable, workshop-grade marking choose Metav IndustryLine’s hardened HSS scribing needle and contact Metav Werkzeuge for personalised advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M240.151.A1 GTIN: 4061905053672 Label: Reißnadel für 240.151 Ø 5 x 20 mm, HSS Facts Diameter: 5 mm Length: 20 mm Weight: 0.01 kg Special features Material: HSS (high-speed steel) Brand: Metav IndustryLine Intended for holder 240.151 Image available FAQ What material is the marking tip made from? The tip is made from HSS (high-speed steel), giving the scribing needle good wear resistance and toughness for routine shop marking. Which holder is compatible with this needle? The needle is intended for use with holders compatible with the 240.151 series; the part is sold under SKU M240.151.A1. How does the ø 5 x 20 mm size affect handling? The ø 5 x 20 mm shank provides a compact, stiff clamping section that improves stability and reduces deflection during marking. Is product identification available for procurement systems? Yes, the item has a GTIN (4061905053672) and the catalog article number M240.151.A1 for straightforward ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Der Amboss bietet eine stabile Auflagefläche mit Ø30 mm und sorgt so für verlässliche, wiederholbare Messwerte; kombiniert mit der robusten Verarbeitung von Microtech Metrology entsteht ein langlebiges Zubehörteil für den Werkstattalltag. Bestellen Sie den Amboss direkt über Metav Werkzeuge oder nutzen Sie die Beratung bei technischen Fragen. Amboss – Messgeräte‑Zubehör von Microtech Metrology Amboss ist ein kompaktes Zubehörteil für Messgeräte und bietet eine stabile Auflagefläche zur Verbesserung der Messwiederholbarkeit in Produktions‑ und Werkstattumgebungen. Präzise Auflagefläche Ø30 mm Kompatibel mit Messgeräten und Vorrichtungen Robuste Ausführung für Wiederholmessungen Einfache Montage und sichere Positionierung Stabile Auflage für konsistente Messungen Die Auflagefläche mit Ø30 mm ist so ausgelegt, dass Bauteile beim Erfassen sicher positioniert werden können. Dank der flachen Kontaktfläche reduziert sich die Gefahr von Kippfehlern, was die Wiederholgenauigkeit bei wiederholten Messungen verbessert. Gerade bei Serienprüfungen sorgt die robuste Ausführung dafür, dass Messzyklen mit gleichbleibender Qualität ausgeführt werden können, ohne dass häufige Justagen nötig werden. Einfache Integration ins Messumfeld Der Amboss ist als Zubehör für Messgeräte konzipiert und lässt sich unkompliziert in bestehende Prüfabläufe einbinden. Dadurch wird die Handhabung bei Innen‑, Außen‑ oder Stufenmessungen erleichtert, weil Werkstücke schneller und sicherer positioniert werden können. Die kompakte Bauform macht das Teil besonders geeignet für beengte Messplätze und Vorrichtungen. Langlebigkeit und Werkstatt‑Praxis Hergestellt für den täglichen Einsatz, bietet die Ausführung eine hohe Widerstandsfähigkeit gegenüber mechanischer Beanspruchung. Die Materialwahl und Fertigungsqualität von Microtech Metrology reduzieren Verschleiß und sorgen für konstante Performance über viele Messzyklen hinweg. Dadurch sinkt der Wartungsaufwand und die Gesamtbetriebskosten werden langfristig gesenkt. Anwendungsfelder und Zielgruppe Dieses Zubehör richtet sich an Anwender im Maschinen‑ und Werkzeugbau, in der Qualitätskontrolle sowie an Werkstätten, die Messgeräte mit stabilen Auflageflächen ergänzen möchten. Insbesondere Fertigungsbetriebe profitieren von der einfachen Integration und der verbesserten Handhabung bei wiederholten Messaufgaben. Metav Werkzeuge empfiehlt den Amboss als zuverlässige Ergänzung für präzise Messaufgaben; bei Fragen oder für eine individuelle Beratung erreichen Sie den Vertrieb per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 110750030 Marke: Microtech Metrology Bezeichnung: Amboss Fakten Messflächen: Ø30 mm GTIN: 4061905459177 Besonderheiten Kategorie: Messgeräte > Zubehör Storytrigger: zubehör FAQ Für welche Messaufgaben ist der Amboss geeignet? Der Amboss von Microtech Metrology eignet sich als stabile Auflagefläche für wiederholbare Prüfungen an Messgeräten und kann insbesondere bei Serienmessungen die Positionierung vereinfachen; Artikelnummer 110750030. Wie groß ist die Auflagefläche des Amboss? Die Auflagefläche hat einen Durchmesser von Ø30 mm, was eine kompakte, aber stabile Kontaktfläche für viele Werkstücke bietet. Ist der Amboss für den Dauereinsatz in der Fertigung geeignet? Ja, die robuste Ausführung des Amboss von Microtech Metrology wurde für den regelmäßigen Werkstatteinsatz entwickelt und reduziert Verschleiß bei häufigen Messzyklen. Kann der Amboss in bestehende Vorrichtungen integriert werden? Der Amboss ist als Messgeräte‑Zubehör konzipiert und lässt sich einfach in Vorrichtungen und Messaufbauten einbinden, um die Positionierung von Bauteilen zu erleichtern. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools

Take advantage of a compact, workshop-ready solution that combines a fine-adjustment spindle with a Ø60 mm measuring table and a rigid Ø22 × 180 mm column for reproducible indicator positioning — order directly via Metav Werkzeuge or request advice from our consultants. Stand — Dial gauge stand with fine adjustment and Ø60 mm table (Microtech Metrology) The Stand is a dial gauge stand designed for stable, repeatable measurements in workshops and inspection benches, combining a compact base with micrometre-style positioning for precise indicator alignment. Fine-adjustment mechanism for micrometre positioning Large Ø60 mm measuring table for stable mounting Rigid column Ø22 × 180 mm for consistent support Compact base 149 × 90 × 30 mm for bench stability Precision control for reliable measurement results The combination of a fine adjustment mechanism and a robust support geometry enables controlled, small-step positioning of indicators, reducing setup variability. A micrometre-like adjustment removes abrupt movements and helps achieve repeatable contact force when taking readings. This level of control suits routine inspection tasks where small deviations matter and contributes directly to reduced rework and faster quality checks. The dial gauge stand concept supports common workshop indicators and makes precise comparative measurements straightforward. Stable construction for repeatable setups A substantial Ø60 mm measuring table and a Ø22 × 180 mm column form the mechanical backbone for consistent mounting and resistance to lateral play. The 149 × 90 × 30 mm base sits low on the bench to minimise rocking, while the vertical support maintains alignment during repeated measurements. These structural choices translate into measurable benefits: fewer discarded parts, less time spent on repositioning, and improved data quality in small-series production and toolroom tasks. The design balances rigidity and compact footprint for everyday metrology needs. Workflow integration and workshop benefits Engineered for practical bench use, the device accepts standard indicator fittings and fits easily into inspection stations or alongside machine tools. The fine adjustment feature eases the alignment of measuring probes to narrow grooves or small bores, while the compact footprint keeps valuable bench space free. Supplied by Microtech Metrology, the unit is tailored to users who prioritise dependable setup and swift changeovers; it supports routine checks, go/no‑go comparisons and setup verification with minimal additional tooling. Clear mechanical design reduces user training time and simplifies daily operation. For tailored purchasing or technical clarification, contact Metav Werkzeuge in Emmerich — Metav Werkzeuge provides product advice and order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 161002020 GTIN: 4061905456619 Manufacturer: Microtech Metrology eClass: 21170604 Core specifications Base dimensions: 149 × 90 × 30 mm Measuring table: Ø60 mm Column: Ø22 × 180 mm Mounting / receptacle: 8 Fine adjustment: yes Special features Fine-adjustment spindle for precise positioning Designed for dial gauges / dial indicators Compact footprint for bench integration Rigid column for repeatable setups FAQ What indicator types fit the stand? The stand accepts standard dial gauges and dial indicators; the mounting receptacle is listed as 8 and accommodates common indicator stems for secure fastening. Is this product supplied ready for use straight away? The Microtech Metrology dial gauge stand is delivered as a ready-to-install fixture and includes the mechanical fine-adjustment feature for immediate integration into inspection stations. Can the stand be used for comparative measurements on a production bench? Yes, the combination of a Ø60 mm measuring table and a rigid Ø22 × 180 mm column makes the stand suitable for repeatable comparative and setup measurements in small-series production. Does the stand require any special mounting or clamping? No specialised clamping is required; the compact base and standard mounting interface enable secure bench placement and straightforward attachment of dial indicators. Which benefits does the fine adjustment provide in daily use? The fine adjustment allows controlled micro-movements, improving alignment accuracy and reducing the risk of overshoot when positioning probes for tight features. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools

Take advantage of straightforward thread conversion together with a compact flange form and low mass for reliable fixture adaptation in metrology and workshop applications; order the adapter directly via Metav Werkzeuge or request advice from our consultants if clarification is needed. Thread adapter M8 to M10, Ø 24 mm, 15 mm thickness — Metav IndustryLine Thread adapter M8 to M10, Ø 24 mm, 15 mm thickness provides a simple, robust solution for converting an M8 threaded fixing into an M10 mounting point, ideal for adapting existing fixtures and measuring accessories. Thread adapter M8 to M10 Ø 24 mm compact flange 15 mm thickness for stable mounting Lightweight — 0.2 kg Convert existing fixings without reworking components A dedicated thread adapter simplifies the transition from an M8 fixing to an M10 thread, eliminating the need for re-machining or new tapped holes. The compact Ø 24 mm flange concentrates clamping forces close to the fixing point, which supports consistent seating and repeatability during fixture changes. This conversion is particularly valuable in metrology environments where maintaining datum positions and minimising setup time are essential for production throughput and inspection consistency. Compact geometry that supports stable mounting and repeatable measurement The adapter’s 15 mm thickness and reduced overhang contribute to mechanical stability, helping to keep the mounted element aligned under lateral load. With a mass of 0.2 kg, the component adds minimal inertia to assemblies while still providing a robust interface between different thread standards. These attributes reduce the risk of micro-movements that could otherwise compromise dimensional checks, so the adapter assists in preserving precision throughout repeated tool or gauge changes. Practical inventory management and operational efficiency Standardising on a small range of adapters decreases the variety of specialised fastenings and fixtures in stock, yielding a measurable efficiency gain in procurement and faster changeovers at the bench. The simple function of the adapter—converting M8 threads to M10—offers a cost-effective route to reuse high-value accessories and measuring heads that would otherwise require bespoke adaptors or replacements, supporting lean workshop practices and shorter machine or inspection downtime. Installation guidance and inspection considerations Installation is straightforward: the adapter engages the female M10 receptacle while accepting the M8 fastener, providing a low-profile connection. As a mechanical accessory, the component does not require calibration and is intended for secure mechanical use rather than measurement certification. Regular visual inspection for wear or thread damage is recommended as part of routine maintenance to assure continued reliability and safe operation in industrial use. Contact Metav Werkzeuge today to discuss compatibility with existing fixtures and to order the Metav IndustryLine thread adapter M8 to M10 (SKU M206.110) for quick integration into production or inspection setups. Technical Data Article number: M206.110 GTIN: 4061905053580 Weight: 0.2 kg Dimensions: Ø 24 x 15 mm EClass: 21130112 Facts Thread sizes: M8 → M10 Flange diameter: 24 mm Thickness: 15 mm Mass: 0.2 kg SKU: M206.110 Special features Thread conversion M8 to M10 Compact flange design Low mass for minimal added inertia Reusable mechanical adapter Intended for mechanical fixing/adaptation FAQ Which thread sizes does the adapter convert? The thread adapter converts an M8 fastening to an M10 mounting point, enabling the use of M10 fixtures where only an M8 thread exists. What are the outer dimensions of the adapter? The adapter has a flange diameter of 24 mm and a thickness of 15 mm, as stated for the Metav IndustryLine thread adapter M8 to M10 (SKU M206.110). Is the adapter intended for precision measurement or does it need calibration? This adapter is a mechanical conversion accessory and does not require calibration; it is not a measuring instrument and is used to adapt threads mechanically. How much does the adapter weigh and does the mass affect fixtures? The adapter weighs 0.2 kg; the low mass minimises added inertia while providing a stable interface between thread sizes. Can the adapter be reused for multiple fixture changes? Yes, the adapter is designed for repeated use as a conversion element between M8 and M10 fixings, subject to routine inspection for thread wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com