Precision metal drills for reliable, high-performance holemaking
Precision metal drills, commonly supplied as HSS twist drills, are engineered to produce clean, dimensionally accurate cylindrical holes in materials such as alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron and non-ferrous metals like aluminium, copper and brass, delivering consistent results in both manual and CNC operations. Their high-speed steel construction provides exceptional toughness, elasticity and fracture resistance, while variants such as roll-formed HSS-R and ground HSS-G offer cost-effective general performance or enhanced runout accuracy and chip evacuation respectively, and HSS-E or HSS-Co types ensure superior hot hardness when machining stainless or highly alloyed steels. Optimised point geometries (typically 118° for softer steels and 135° for harder grades) combined with a cross grind reduce feed force, enable accurate centring and promote efficient chip removal, improving process reliability and prolonging tool life.
3.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — short Type N, 3.2 mm, 135°, TIN-coated, HSS-G, DIN 338 (MetavCUT Profi Line) The Twist Drill short Type N is a precision metalworking drill for Drilling Machines, designed for stable, high-performance holemaking in a wide range of metals. Short design for increased stability and precision TIN-coated surface for reduced friction and longer tool life Fully ground HSS-G for cleaner holes and faster drilling 135° point angle optimised for harder materials Complies with DIN 338 for short cylindrical shank drills Precision and efficiency for demanding metalwork The Twist Drill combines a HSS-G substrate with a fully ground geometry to deliver measurable performance benefits when machining metals. The shortened overall length and reduced overhang minimise deflection, which translates into cleaner holes and improved repeatability. Thanks to the grinding process, the flute geometry produces sharp cutting edges and excellent runout behaviour. For hard or alloyed steels the 135° point angle reduces wandering at the start of the cut and shortens the approach time, so the tool performs reliably under higher loads. Surface engineering that extends service life A TIN-coated finish lowers friction and heat generation at the cutting edge, so wear is reduced when used with appropriate cooling. The coating supports longer tool life during continuous metalworking applications and improves resistance to abrasive wear on non-ferrous materials. When combined with coolant, the Titanium Nitride layer helps maintain cutting geometry over a larger number of holes, reducing downtime for tool changes and ensuring consistent hole quality. Geometry and form for stable, accurate holes The drill’s fully ground flute geometry and short spiral length offer better centring and decreased thrust force during penetration. With a Spiral Length of 36 mm and an Overall Length of 65 mm for a 3.2 mm diameter, the construction minimises chatter and bending moments typical of longer tools. The fully ground shaft enables up to 40% faster drilling rates and requires significantly less axial force compared with conventional HSS drills, making it particularly suitable for stationary and portable Drilling Machines when precision is crucial. Who benefits and when to seek expert help This tool is aimed at professional metalworkers, tool rooms and maintenance technicians who need repeatable, high-quality bores in materials such as alloyed and unalloyed steel, cast iron, sintered metals and non-ferrous metals. If uncertainty remains about suitability for a particular application or required coolant strategy, METAV Werkzeuge provides extensive and competent advice to ensure the correct tool choice and cutting parameters. Their guidance helps avoid tool breakage and optimises process reliability. We recommend the MetavCUT Twist Drill short Type N for precision metalworking and encourage you to contact METAV Werkzeuge for personalised, expert advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical details Designation: Twist Drill Marke: MetavCUT SKU: 41032-FDA Diameter: 3.2 mm Point angle: 135° Type: Type N Execution: short Colour / Coating: TIN-coated Shank execution: fully ground Spiral length: 36 mm Overall length: 65 mm Material: HSS-G Standard: DIN 338 Application: Drills for metal For Drilling Machine: Drilling Machine Model series: Profi Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills mainly used for? Twist Drills from MetavCUT, short Type N, are primarily used for machining high-strength materials and for larger drill diameters; their form allows relatively easy regrinding and they withstand elevated loads, making them suitable for demanding metalworking tasks. Which three drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill group optimised for ferrous and non-ferrous alloys. Why are Twist Drills point-ground? Point grinding reduces the cross-cut at the tip of the Twist Drill, significantly lowering friction forces and thus the required feed. This sharpening also improves centring of the drill tip in the workpiece. Can a metal drill be used in wood? A metal drill such as the MetavCUT Twist Drill can be used in wood but offers poorer guidance and a less clean result compared with wood-specific bits; however, metal drills are easier to regrind and present lower self-feed tendencies. For what drilling depths is the Twist Drill most commonly used? A through-hole in solid material is often executed with a Twist Drill; for diameters up to 20 mm and drill depths up to 100 mm the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are inherently superior to standard HSS is not universally true; evaluate working conditions carefully to decide if the higher purchase cost of HSSE is justified for your application.
3.2mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill Spiralbohrer (HSS‑G, 3.2 mm, 135°, long) — MetavCUT, DIN 340, Bright Finished, Fully Ground The Twist Drill Spiralbohrer is a long HSS‑G metal drill designed for deep and hard‑material drilling with a 135° point angle for use in drilling machines. Long HSS‑G design for deep hole drilling 3.2 mm diameter for precise pilot and through holes 135° tip for improved centring in hard materials Fully ground shank for high concentricity and clean holes Deeper holes with reliable stability For tasks that require depth and precision, this long Twist Drill delivers a clear advantage. The extended overall length and longer Spiral Length allow reaching recessed or less accessible drilling points without extensions. Thanks to the HSS‑G material and DIN 340 specification, the drill maintains cutting performance when penetrating thicker sections, while the bright finished surface reduces friction. This results in fewer tool changes and consistent hole quality for metalworking operations. Designed for harder materials and fast cutting A 135° point angle reduces the initial bite and improves centring on tough substrates such as alloyed and unalloyed steel, cast materials and sintered metals. The ground geometry achieved by CNC grinding creates sharp cutting edges that contribute to up to 40% faster drilling and lower required feed force compared with conventional HSS drills. This combination supports more efficient machining and a smoother feed, especially when used with appropriate cooling. High concentricity and precise results The fully ground shank and ground flutes ensure excellent runout characteristics and produce cleaner, more accurate holes. Reduced vibration and improved concentricity protect both the tool and the workpiece, which is particularly beneficial when producing tight‑tolerance bores. Users will notice less burr formation and better surface finish, making subsequent processing steps easier and reducing rework. Practical use and target applications This Spiralbohrer is optimised for use in drilling machines and is primarily intended for metalworking: drilling in alloyed steel, cast iron, temper cast and non‑ferrous metals as well as hard plastics. The long version is especially suited to workshops and industrial settings where deeper bores are frequent. For occasional home or light workshop use, ensure appropriate clamping, speed and coolant to benefit from the drill’s properties. We recommend choosing MetavCUT tools when deep, precise metal drilling is required — for further advice METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Spiralbohrer Brand: MetavCUT SKU: 53032-FDA Diameter: 3.2 mm Overall length: 106 mm Spiral length: 69 mm Point angle: 135° Version: long Shank finish: fully ground Material: HSS‑G Standard: DIN 340 Colour: bright finished Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill Spiralbohrer by MetavCUT suitable for? The MetavCUT Twist Drill Spiralbohrer is intended primarily for metalworking and performs well in alloyed and unalloyed steel, Cast Steel, Gusseisen, Sintered Iron, Tempered Cast materials, non‑ferrous metals and hard plastics when used with proper machining parameters. How should the MetavCUT Twist Drill Spiralbohrer be used to maximise tool life? When using the MetavCUT Twist Drill Spiralbohrer, apply suitable cutting speeds, coolant and clamping; the fully ground HSS‑G geometry benefits from controlled feed and cooling to avoid chipping and to maintain concentricity for consistent hole quality. For what are Twist Drills used? The Twist Drill Spiralbohrer from MetavCUT is mainly used for machining high‑strength materials and large drill diameters; its shape is easy to grind and withstands higher loads. Which 3 drill types exist? Regarding common types, there are Metal drills (such as the MetavCUT Twist Drill Spiralbohrer), Wood drills, and Stone/Concrete drills.
3.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill (Type N) — 3.3 mm, HSS, short, 118° point, black, DIN 338 by MetavCUT A compact Twist Drill (Type N) designed for precision metalworking in hand drills and drilling machines, offering a short, stable geometry and a 118° point for reliable centring. Short HSS design for higher stability 118° point angle for improved centring Type N normal spiral optimised for metal DIN 338 specification for consistent quality Black finish with 65 mm overall length Outstanding Stability and Precision for Metalworking The Twist Drill in short HSS execution delivers enhanced stability thanks to its reduced protruding length and a stiffer design. This configuration reduces deflection during machining, resulting in cleaner holes and better repeatability when drilling metal. Short drills are particularly suitable for operations where rigidity and accuracy matter, such as jig or fixture work and reworking on portable equipment. Material and Manufacturing Advantages that Matter Manufactured from HSS (High Speed Steel) and produced according to DIN 338, this short twist drill combines toughness and wear resistance for typical metal applications. HSS offers elasticity that reduces breakage risk on small diameters and permits straightforward resharpening. The Type N normal spiral is the classic choice for steel, cast iron and non-ferrous metals, ensuring a balance between cutting action and tool life. Design Features That Improve Workflow Equipped with a 118° point angle and a conventional flute geometry, the tool provides reliable chip evacuation and easy centring on flat or slightly curved surfaces. The short overall length (65 mm) and flute length (36 mm) make the drill less prone to vibration, which shortens cycle times by reducing the need for rework. The black surface finish supports identification and handling in busy tool sets. Who Benefits Most from This Twist Drill This product is aimed at workshop professionals and maintenance technicians who require a robust, easy-to-sharpen drill for metal fabrication and repair. The combination of HSS material, Type N geometry and DIN 338 conformity makes it a practical choice for everyday metal drilling tasks on portable and stationary drilling equipment. For specialist materials or deeper holes, alternative geometries may be preferable. Strong recommendation: For reliable, precision metal drilling choose the MetavCUT Twist Drill (Type N) — METAV Werkzeuge offers expert consultation and comprehensive technical support; contact via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40033-FDA Diameter: 3.3 mm Point Angle: 118° Type: Type N Material: HSS (High Speed Steel) Execution: short Standard: DIN 338 Colour: black Overall Length: 65 mm Spiral (Flute) Length: 36 mm Application: Drills for metal / suitable for Drilling Machine (Hand Drill) Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill (Type N)? The MetavCUT Twist Drill (Type N) is primarily intended for machining metal; it is suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. Its HSS construction provides elasticity and resistance, making it a dependable choice for standard metal drilling tasks with hand and machine tools. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking applications.
3.3mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill (Karosseriebohrer) — MetavCUT HSS-G, 3.3 mm, 135° double-sided, black finished, fully ground shaft Body Drill (Karosseriebohrer) is a double-ended HSS-G Twist Drill designed for precision metal drilling in demanding applications, combining a 3.3 mm diameter and 135° point angle for reliable results in hard materials. Double-ended design for extended tool life HSS-G fully ground for precise metal holes 3.3 mm diameter with 135° point for tough steels Short robust shank for stable drilling Black finished without margin for minimal burrs Faster, cleaner holes thanks to precision ground HSS-G Because the HSS-G geometry is produced by CNC grinding rather than rolling, the drill achieves very sharp cutting edges and high run-out accuracy. This results in cleaner holes and improved surface quality when working with Steel, Cast Iron or Non-Ferrous Metals. For workshop environments where repeatable precision matters, the fully ground shank helps reduce vibration and ensures consistent centring when used with a hand or bench Drilling Machine. Double-ended design reduces downtime and material waste A double-sided configuration makes this Twist Drill effectively "two tools in one": if one tip becomes blunt, the part can be reversed to use the other end. This feature is particularly advantageous in sheetmetal and bodywork applications where quick tool changes are costly. Users benefit from longer service intervals and fewer interrupted jobs, while the short, robust form offers higher stability for drilling holes for rivets and thin-sheet fastenings. Optimised geometry for hard materials and reduced feed effort The 135° point angle is chosen specifically for harder materials, improving the initial penetration and increasing tool life under elevated loads. The specially ground geometry allows up to 40% faster drilling and requires about 50% less thrust compared with conventional HSS drills, making operations less strenuous and more efficient. For tasks requiring accurate centring and reduced burr formation, this Body Drill offers tangible productivity gains. Who benefits most — versatile use in metalworking This drill is aimed at professionals and serious hobbyists in Automotive, Fabrication and Repair workshops who need a compact, reliable Twist Drill for metal operations. The 3.3 mm diameter and 46 mm overall length make it suitable for common fastening and hole-preparation tasks in alloyed and unalloyed steel, cast materials and engineering plastics. The black finished surface reduces adhesion of chips and helps maintain cutting performance in repeated cycles. Choose the MetavCUT double-ended HSS-G Body Drill as a robust Twist Drill for precision metalwork and contact METAV Werkzeuge for personalised technical advice via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 59033-FDA Material: HSS-G Diameter: 3.3 mm Point angle: 135° Overall length: 46 mm Spiral length: 10 mm Execution: double-sided Shank finish: fully ground Colour: black finished without margin For machine: Drilling Machine Application: Drills for metal Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Body Drill (Twist Drill) mainly used for? The MetavCUT Body Drill (Twist Drill) is primarily applied to machining high-strength materials and larger drill diameters; its design is suited for operations in Alloyed and Unalloyed Steel, Cast Steel, Cast Iron and Hard Plastics, where durability and precise holes are required. Which three drill types should be known for general work? For most workshops, the three basic drill categories are Metal Drills (like the MetavCUT Body Drill), Wood Drills and Masonry/Concrete Drills; each type is optimised in geometry and material for its intended substrate. Why are Twist Drills sharpened? Twist Drills are sharpened to reduce the cross-edge at the tip, which lowers friction and therefore reduces the required feed force; sharpening also improves centring and cutting efficiency so the MetavCUT Body Drill penetrates more easily and produces cleaner holes. Can you use a metal Twist Drill in wood? A Metal Twist Drill such as the MetavCUT Body Drill can be used in wood, but steering is less precise and the finish may be rougher; these drills are easier to re-sharpen and show less aggressive self-feed than specialised wood bits. For which hole depths is the Twist Drill most commonly used? A through-hole in solid material is typically made with a Twist Drill; for diameters up to about 20 mm and hole depths up to roughly 100 mm, the Twist Drill is the most frequently used tool in metalworking and maintenance tasks. Is HSS or HSSE better for workshop drills? The common belief that HSSE is always superior to HSS is not universally valid; when selecting a drill—for example the MetavCUT Body Drill in HSS-G—you should consider specific working conditions to decide whether the higher cost of HSSE is justified.
3.3mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer — Body Drill (Diameter 3.3 mm · 135° Point Angle · Double-sided · Bright Finished · Fully Ground · HSS‑G) The Karosseriebohrer Body Drill is a compact Twist Drill designed for precision drilling in metal using a drilling machine, ideal for thin sheets, bodywork and industrial applications. Double-sided design for extended usability HSS‑G fully ground for precise, clean holes 135° point angle for harder materials Bright finished surface for smooth chip evacuation Faster, more controlled metal drilling for demanding tasks The fully ground HSS‑G geometry of this Body Drill delivers a noticeable increase in efficiency: compared with rolled HSS drills, the ground flute and cutting edges provide up to 40% faster drilling while requiring lower feed forces. This means less operator fatigue and more consistent results when working on alloyed and unalloyed steel, cast materials and hard plastics. The 135° point angle reduces walking on tough surfaces and improves centring, making it especially suitable for stainless steel and other harder workpieces. Reliable double-ended design for workshop flexibility Thanks to the double-sided (double‑ended) configuration, the Karosseriebohrer functions like two drills in one: if one tip becomes blunt, the drill can be reversed and used again, extending tool life and reducing downtime. The short, sturdy design commonly used in bodywork and sheet-metal work offers stable handling in hand drills and bench machines, while the bright finish aids chip flow and visual inspection of the cutting geometry. Application focus — engineered for metal and thin-sheet work This Body Drill is optimised for drilling in metal: legged and unlegged steels, cast steel, cast iron, sintered iron, malleable castings, non-ferrous metals and hard plastics. For best results in industrial or workshop use, pair the drill with appropriate coolant and secure clamping. When used in a hand drilling machine, the ground shank and precision flute geometry promote steadier running and cleaner hole quality even at higher spindle speeds. Practical advantages for professional users The fully ground shaft and precise CNC-style grind deliver high runout accuracy and sharply defined cutting edges, translating into clean, burr‑reduced holes and less rework. Shorter penetration time and reduced thrust mean more efficient production cycles. Users who value repeatable hole quality in bodywork, repair or manufacturing environments will benefit from the drill’s combination of durability and cutting performance. For precision metalworking choose the MetavCUT Karosseriebohrer Body Drill with HSS‑G grind — METAV Werkzeuge offers expert consultation to ensure this Twist Drill matches your application needs; contact us by eMail at info@metav-werkzeuge.com or by phone +49 2822 7131930 and WhatsApp +49 170 2837271 Designation: Karosseriebohrer / Body Drill Brand: MetavCUT Type: Double-sided (double‑ended) Diameter: 3.3 mm Point Angle: 135° Colour: Bright finished Execution: Double-sided Shaft Execution: Fully ground Material: HSS‑G Spiral Length: 10 mm Total Length: 46 mm For Drilling Machine: Drilling Machine (Hand drill) Application: Drills for metal Model Series: Standard Line Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the Karosseriebohrer Body Drill suitable for handheld drilling machines? The MetavCUT Karosseriebohrer Body Drill is designed to be used with drilling machines including hand drills; its short, stable double‑ended form and fully ground shank support accurate running in portable equipment, though for maximum tool life and safety a secure clamp and appropriate speed/coolant are recommended. What are Twist Drills used for? Twist Drills, like the Karosseriebohrer Body Drill, are mainly used for machining high‑strength materials and larger diameters; they are easy to regrind and withstand significant stresses. The ground HSS geometry typically enables faster cutting and lower feed forces compared with rolled drills. Which 3 drill types exist? The three primary drill types are: metal drills, wood drills and stone/concrete drills. MetavCUT produces drills optimised for metalworking, such as this Body Drill tailored to sheet and body applications.
3.3mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Der Spiralbohrer überzeugt durch die Kombination aus HSS-G Geschliffenheit, extra kurzer Ausführung und universeller Zylinderschaft, was für mehr Stabilität, geringere Bruchneigung und effizientes Bohren in Metall sorgt; bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an. Spiralbohrer von MetavCUT — extra kurze HSS-G Ausführung Der Spiralbohrer ist ein extra kurzer, geschliffener HSS-G Bohrer für präzise Metallbohrungen mit hoher Standzeit. Spiralbohrer »56033-FDA« von MetavCUT Extra kurze Ausführung für enge Platzverhältnisse HSS-G geschliffen: Bis zu 40 % schneller Bohren Spitzenwinkel 135° für härtere Werkstoffe Zylinderschaft: Für normale Bohrfutter universell passend Mehr Stabilität und weniger Bruch bei begrenztem Platz Die extra kurze Ausführung reduziert Hebelwirkung und erhöht die Verdrehungsfestigkeit, wodurch die Gefahr von Bruch und Auslauf verringert wird. Gerade in engen Arbeitsbereichen oder bei Winkelbohrungen ermöglicht die kürzere Gesamtlänge eine sauberere Führung. Durch die geschliffene HSS-G Qualität wird die Vorschubkraft reduziert und die Bohrgeschwindigkeit deutlich gesteigert, was Zeitersparnis und weniger Belastung für die Maschine bedeutet. Effizientes Bohren in Stahl, Guss und Nichteisenmetallen Mit einem Spitzenwinkel von 135° und der Typ-N Normalspirale ist der Bohrer speziell für härtere Werkstoffe ausgelegt. Er eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie für Nichteisenmetalle und Hartkunststoff. Die geschliffene Schneide sorgt für sauberen Spanabtransport und konstante Lochqualität, wodurch Nacharbeit und Gratbildung minimiert werden. Universelle Anwendung und einfache Handhabung Die Zylinderschaft macht den Bohrer kompatibel mit gängigen Handbohrmaschinen und Dreibackenfuttern, sodass er sich problemlos in Werkstatt und Montage einbinden lässt. Wegen der universellen Schaftform empfiehlt sich bei sehr hohem Drehmoment zusätzlich das sichere Spannen im Bohrfutter beziehungsweise der Einsatz eines Spannfutters, um Durchrutschen zu vermeiden. Die extra kurze Bauform ist ideal für dünnwandige Bleche und Profile. Zielgruppe, Einsatzszenarien und Wirtschaftlichkeit Dieser Bohrer wurde für Handwerk, Instandhaltung und industrielle Kleinserien konzipiert, die präzise Metallbohrungen unter Platzbeschränkung benötigen. Die Kombination aus HSS-G Material und extra kurzer Geometrie reduziert Ausfallzeiten und erhöht die Wirtschaftlichkeit, weil weniger Bruch und damit weniger Nachschub erforderlich sind. Sichern Sie sich den präzisen HSS-G Spiralbohrer von MetavCUT über unseren Shop oder kontaktieren Sie die Metav Beratung per E‑Mail an info@metav-werkzeuge.com bzw. telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 56033-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 1897 Fakten Durchmesser: 3,3 mm Gesamtlänge: 46 mm Spirallänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Hochleistungs-Schnellarbeitsstahl, geschliffen) Ausführung: extra kurz (mehr Stabilität, weniger Bruchneigung) Schaftausführung: Zylinder (Rundschaft, universell passend) Typ: Typ N (Normalspirale für Metall) Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer in HSS-G Ausführung eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle; die geschliffene Spitze liefert sauberen Spanabtransport und stabile Bohrbilder. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die Zylinderschaft macht den Spiralbohrer kompatibel mit normalen Dreibackenfuttern an Handbohrmaschine und Winkelbohrmaschinen; bei sehr hohem Drehmoment ist sicheres Spannen zu empfehlen. Welche Vorteile bringt die extra kurze Ausführung in der Praxis? Die extra kurze Bauform des Spiralbohrers reduziert Hebelwirkung, erhöht die Stabilität und verringert die Bruchneigung, was besonders in engen oder schwer zugänglichen Bereichen Zeit und Material spart. Welchen Spitzenwinkel hat der Bohrer und warum ist das wichtig? Der Spiralbohrer hat einen Spitzenwinkel von 135°, was das Anbohren in härtere Werkstoffe erleichtert und die Anbohrzeit reduziert; das Ergebnis sind präzisere und gratärmere Bohrungen. Wie viele Bohrer sind in einer Verpackungseinheit und wie lautet die SKU? Die Verpackungseinheit beträgt 10 Stück und die Artikelnummer beziehungsweise SKU lautet 56033-FDA.
3.3mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Der Spiralbohrer von MetavCUT überzeugt durch seine geschliffene HSS-G-Geometrie und den formschlüssigen Sechskant Schaft; schnelle, präzise Metallbohrungen bei reduziertem Anpressdruck sind dadurch realisierbar. Nutzen Sie die Kombination aus Standzeit, Leistungsfähigkeit und einfacher Spannbarkeit für saubere Fertigungsergebnisse. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (HSS-G, geschliffen) Der Spiralbohrer von MetavCUT ist ein geschliffener HSS-G Bohrer für präzise Metallbohrungen und universelle Werkstattanwendungen mit Sechskant Schaft. Geschliffene HSS-G-Geometrie für saubere Bohrlöcher Sechskant Schaft für schnellen Werkzeugwechsel Geeignet für Stahl, Guss und Nichteisenmetalle DIN 338 Normiert: kurze Spiralbohrer mit Zylinderschaft Spirallänge 35 mm für kontrollierte Spanabfuhr Schnelle, präzise Metallbearbeitung mit reduziertem Kraftaufwand Der geschliffene HSS-G Bohrer liefert scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu sauberen Bohrlöchern in legierten und unlegierten Stahl führt. Durch den CNC Schleifprozess wird die Spanform optimiert, sodass das Werkzeug bis zu 40 % schneller arbeiten kann und dabei etwa 50 % weniger Anpresskraft benötigt. Diese Eigenschaften reduzieren Ermüdung bei stationären und mobilen Bohrvorgängen und verbessern den Durchsatz in der Werkstatt. Praktische Kompatibilität für Werkstatt und Handbetrieb Mit Zylinderschaft in Sechskant Ausführung lässt sich der Bohrer sicher in Schnellwechselhaltern von Akkuschraubern und in klassischen Bohrfuttern spannen. Das macht das Werkzeug besonders geeignet für den Einsatz an Handbohrmaschinen und stationären Säulenbohrmaschinen. Die Kombination aus Sechskant Schaft und passender Spirallänge gewährleistet Formschluss beim Drehmoment und zuverlässige Spanabfuhr bei mittleren Bohrtiefen. Materialeigenschaften und Anwendungshinweise für lange Standzeit Das Material HSS-G (geschliffener Schnellarbeitsstahl) bietet eine gute Balance zwischen Zähigkeit und Schneidhaltigkeit für die Bearbeitung von Stahl, Guss und Hartkunststoff. Beachten Sie, dass geschliffene Ausführungen empfindlicher gegenüber Biegung und Verkantung sind; deshalb ist eine ruhige Spannaufnahme und geeignete Kühlschmierung bei harten Werkstoffen empfohlen. Der Spitzenwinkel von 118° unterstützt saubere Zentrierung auf flachen und leicht gewölbten Oberflächen. Zielgruppe und typische Einsatzfälle in Produktion und Reparatur Dieses Werkzeug wurde für Anwender entwickelt, die wiederholt präzise Metallbohrungen benötigen: Werkstätten, Montagebetriebe und ambitionierte Heimwerker mit hochwertiger Ausstattung. Typische Anwendungsfälle sind Montagebohrungen in Blechen, Reparaturarbeiten an Maschinenteilen sowie präzise Bohrungen in Gusseisen und Temperguss. Durch die Normkonformität nach DIN 338 fügt sich der Bohrer leicht in standardisierte Arbeitsprozesse ein. Empfehlung: Den MetavCUT HSS-G Spiralbohrer über Metav Werkzeuge beziehen, Verfügbarkeit per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 prüfen und für präzise Werkstattprozesse nutzen. Produktmerkmale Artikelnummer: 57033-FDA Marke: MetavCUT Serie: Standard Line Ausführung: geschliffen Material: HSS-G Norm: DIN 338 Daten Durchmesser: 3,3 mm Gesamtlänge: 85 mm Spirallänge: 35 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten sechskant Schaft: für Schnellwechselhalter und formschlüssige Drehmomentübertragung HSS-G: geschliffener Schnellarbeitsstahl, hohe Schneidhaltigkeit DIN 338: kurze Spiralbohrer mit Zylinderschaft, Norm für Austauschbarkeit und Toleranz geschliffen: CNC Schliff für scharfe Kanten und hohe Rundlaufgenauigkeit FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer aus HSS-G eignet sich besonders für legierte und unlegierte Stahlarten, Gussstahl, Gusseisen sowie Nichteisenmetalle; die geschliffene Geometrie sorgt für saubere Bohrlöcher bei diesen Werkstoffen. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Sechskant Schaft des MetavCUT Spiralbohrers erlaubt das einfache Spannen in Schnellwechselhaltern von Akkuschraubern und auch in normalen Bohrfuttern, wobei auf eine ruhige Führung geachtet werden sollte. Wie beeinflusst die geschliffene Ausführung die Anwendung? Geschliffene HSS-G Bohrer bieten schärfere Schneiden und höhere Rundlaufgenauigkeit, was zu schnellerem Fortschritt führt; sie sind jedoch empfindlicher gegenüber Verkantung und profitieren von stationärem Einsatz und Kühlschmierung. Ist der Bohrer nach einer Norm gefertigt? Ja, der Bohrer entspricht der DIN 338, was kurze Spiralbohrer mit Zylinderschaft klassifiziert und Austauschbarkeit sowie Toleranzen sicherstellt. Welche Vorteile bringt der Sechskant Schaft? Der Sechskant Schaft gewährleistet formschlüssige Drehmomentübertragung und schnellen Werkzeugwechsel, was besonders in der Montage und bei wiederholten Bohrvorgängen Zeit spart.
3.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Type N for Drilling Machines, Ø 3.3 mm, 135°, DIN 338, Bright Finished The Twist Drill short Type N from MetavCUT is a precision metal‑working drill designed for drilling machines, offering a 3.3 mm diameter and a 135° tip angle for demanding steel and cast‑metal applications. Short HSS‑G Type N for high stability 3.3 mm diameter for precise pilot holes 135° tip angle for hard materials Fully ground shank for accurate centring Conforms to DIN 338 for metalworking Faster metalworking thanks to ground HSS geometry The HSS‑G construction of this Twist Drill provides a measurable performance advantage: the ground geometry enables up to 40% faster drilling while requiring approximately 50% less feed force than conventional HSS drills. For professionals working with legated and unlegated steels, cast steel and non‑ferrous metals, this means shorter cycle times and less operator effort. The result is more efficient machining without compromising hole quality. Increased stability and precision from the short design Because this tool follows DIN 338 as a short twist drill, the reduced overall length improves stiffness and reduces bending under load. Shorter overhang leads to better concentricity and less chatter, which is especially beneficial when producing tight tolerance holes in hard materials. The compact design therefore supports consistent, repeatable results and reduces scrap rates in workshop environments. Reliable centring and tip design for hard materials The 135° tip angle is optimised for harder workpieces such as stainless steel, reducing walking and improving initial contact. The drill’s Type N normal spiral is the classic metal spiral geometry, suited primarily for metalworking rather than soft timber. A fully ground shank ensures excellent clamping fit and centring in the chuck, while the bright finished surface promotes smooth chip evacuation and visual inspection of wear. Built for professional drilling machines and demanding tasks Compatible with standard drilling machines, this short HSS‑G metal drill is intended for users who require dependable performance when machining steel, castings and technical plastics. Workshops, maintenance crews and metal fabricators benefit from the balance of hardness and toughness offered by the HSS‑G material, making it a practical choice for production and repair tasks where precision and tool life matter. Strong recommendation: choose the MetavCUT HSS‑G short Type N Twist Drill for demanding metalwork—METAV Werkzeuge provides expert, personalised advice if you are unsure whether this tool meets your requirements; contact us by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 27033-FDA Type: Type N Material: HSS‑G Diameter: 3.3 mm Tip angle: 135° Overall length: 65 mm Spiral length: 36 mm Execution: short Shaft execution: fully ground Colour / Finish: bright finished Application: Drills for metal For drilling machine: Drilling Machine Model series: Basic Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The MetavCUT Twist Drill short Type N is mainly used for machining high‑strength materials and larger diameters; it performs particularly well in legated and unlegated steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Its ground design is easier to sharpen and withstands higher loads. Which three main drill types exist and where does this product fit? There are three principal drill types: Metal Drill, Wood Drill and Stone / Concrete Drill. The MetavCUT Twist Drill is a metal drill (Type N), optimised for metal applications rather than timber or masonry.
3.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N Metal Drill, 3.3 mm, 135°, HSS‑G, Bright Finished The Twist Drill is a short Type N metal drill designed for precise drilling in hard materials with a 3.3 mm diameter and a 135° tip angle for industrial Drilling Machine applications. Short design for higher stability Sharp CNC‑ground geometry for clean holes 135° tip angle for hard materials Fully ground shank for excellent concentricity Stability and faster machining for demanding metalwork A short design reduces the unsupported length and significantly increases Stability during drilling, which results in less bending and more precise holes in steels and other hard materials. The HSS‑G ground geometry enables up to 40% faster penetration while requiring about 50% less feed force than conventional HSS variants, so machining cycles are shorter and operator effort is reduced. This makes the tool particularly suitable where repeatable, tight‑tolerance holes are required. Built for hard materials with an optimised tip geometry The combination of a 135° tip angle and the classic Type N spiral is optimised for tougher workpieces such as stainless steels and cast materials. A larger tip angle shortens the time to break through the surface and improves centring on hard substrates. The term HSS‑G indicates a ground flute geometry produced by CNC grinding, which creates very sharp cutting edges and high roundness accuracy—advantages that pay off when working with alloyed and unalloyed steels. Dimensions and machine compatibility for practical workshop use With a 3.3 mm diameter, a Spiral Length of 36 mm and an Overall Length of 65 mm, this short twist drill fits standard chucks on conventional Drilling Machines and is the right choice where lateral rigidity is essential. The Fully Ground Shank ensures excellent concentricity in the chuck, reducing run‑out and vibration. The bright finished surface aids chip evacuation and visual inspection of the cutting geometry. Who benefits and where to deploy this professional tool Metalworkers, maintenance teams and precision toolrooms appreciate the Profi Line quality of this MetavCUT product when producing repeatable holes in metal components. The short, ground design is ideal for stationary or portable Drilling Machine operations where stability, hole quality and efficient cycle times matter. For tasks demanding high edge quality and consistent diameter, this twist drill provides the right balance of toughness and sharpness. Choose the MetavCUT Profi Line Twist Drill for reliable, high‑precision metal drilling and contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or phone +49 2822 7131930 Designation: Twist Drill Brand: MetavCUT SKU: 48033-FDA Diameter: 3.3 mm Spiral Length: 36 mm Overall Length: 65 mm Tip Angle: 135° Type: Type N Execution: Short Material: HSS‑G Shank Execution: Fully Ground Surface Finish: Bright Finished Application: Drills for Metal Model Series: Profi Line For Drilling Machine: Drilling Machine Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill (Type N) is primarily applied to machining high‑strength materials and larger drilling diameters in metalworking. This short, ground form is easy to re‑grind and withstands higher loads, which makes it suitable for steels, cast irons and non‑ferrous metals while delivering clean, precise holes. Which 3 drill types exist? In general drill categorisation there are three main types: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill (Type N) belongs to the metal drill category and is optimised for machining metals rather than timber or masonry.
3.3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short, Diameter 3.3 mm, 135° tip, TiN-coated, HSS-G, short, DIN 338 The Twist Drill short Type N TiN-coated is a precision drill for use in a Drilling Machine, designed for accurate metalworking in demanding shop and industrial environments. Short design for higher drilling stability 135° tip angle for hard metal entry TiN-coated for extended tool life Fully ground HSS-G for precise, clean holes Conforms to DIN 338 for short solid shank drills Outstanding accuracy and faster metalworking thanks to reduced overhang A short Twist Drill with a reduced overhang minimises bending and vibration, delivering higher stability and significantly improved concentricity when drilling metals. The shorter projection from the chuck helps to achieve clean, round holes even at higher spindle speeds. For tasks where precision matters — such as component fitting or pilot-hole preparation — this compact geometry reduces the risk of chatter and tool breakage while enabling more consistent hole diameters. Coating and material that extend lifetime under load The combination of HSS-G substrate and TiN coating offers a clear performance advantage when machining steels and non-ferrous alloys. HSS-G (ground high-speed steel) provides sharp cutting edges and excellent edge retention, while the TiN (Titanium Nitride) surface reduces friction and wear, improving heat resistance. In practice, this means longer intervals between regrinds and more holes per tool in both alloyed and unalloyed steel, cast materials and hard plastics when used with appropriate cooling. Designed application and who benefits most from this tool Manufacturers, toolrooms and maintenance workshops that require reproducible, accurate holes will value the short Type N geometry and fully ground Shank for dependable performance. This Twist Drill is particularly suitable for drilling into legierten und unlegierten Stahl, Gusseisen, Kupfer, Bronze und Hartkunststoff when paired with adequate coolant. Users seeking a balance of service life and re-sharpenability will appreciate the ability to resharpen ground flutes while maintaining excellent runout characteristics on stationary and portable machines. Practical advantages explained: tip angle, grind and standards A 135° tip angle is optimised for harder materials and reduces the initial cutting forces needed to penetrate tough surfaces, improving centering and lowering the chance of walk-off. The designation fully ground (HSS-G) indicates that the flutes and geometry were produced by CNC grinding rather than rolling, resulting in sharper edges and superior hole finish — albeit with a slightly increased brittleness that recommends stationary setups and coolant use. Compliance with DIN 338 assures standardised lengths and tolerances for short solid shank drills, simplifying tool selection and stocking. Strong recommendation: MetavCUT precision short Twist Drill for metalworking tasks where stability and lifetime matter — if uncertain whether this tool matches specific requirements, METAV Werkzeuge offers expert advice and application support; contact via email at info@metav-werkzeuge.com, by phone +49 2822 7131930, or WhatsApp +49 170 2837271 for personalised guidance and technical consultation. Technical data Designation: Twist Drill (Short) Brand: MetavCUT SKU: 46033-FDA Diameter: 3.3 mm Overall length: 65 mm Spiral length: 36 mm Tip angle: 135° Type: Type N Material: HSS-G Shank execution: Fully ground Coating/Colour: TiN-coated For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Application: Drills for metal Ausführung: short Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill (Type N) primarily used for? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it excels in machining alloyed and unalloyed steel, cast irons and non-ferrous metals when employed in a Drilling Machine with suitable cooling to reduce wear. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters. This shape is easy to regrind and withstands higher loads. When used with appropriate coolant the TiN-coated HSS-G variant significantly reduces friction and wear, extending tool life. Which three drill types exist? The three primary drill types are Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking applications.
3.3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Introducing the Twist Drill — Short Type N, 3.3 mm, TIN-coated, HSS-G, 135° (MetavCUT) The Twist Drill short Type N is a precision metalworking drill designed for use with a Hand Drill or Drilling Machine and ideal for accurate holes in alloyed and unalloyed steel. Short design for higher stability and precision TIN-coated surface for reduced wear and friction Fully ground HSS-G shank for faster cutting 135° point angle for hard materials such as stainless steel Conforms to DIN 338 for short twist drills Higher precision through reduced overhang and robust geometry A shorter overall length delivers tangible benefits during machining: the short Twist Drill minimises cantilever action and therefore reduces vibration and tool deflection. This results in more concentric holes and improved surface finish when drilling metal. For users who require consistent hole quality in demanding jobs, the reduced length directly translates into fewer reject parts and less rework. Longer tool life and reduced friction thanks to TIN coating The TIN-coated surface (Titanium Nitride) lowers friction and increases thermal resistance during cutting, which slows wear on the cutting edges. Combined with the HSS-G substrate, this coating is particularly effective when drilling alloyed and unalloyed steel, cast iron and copper alloys. The result is extended tool life under appropriate cooling and the ability to maintain cutting performance for longer production runs. Faster penetration with a fully ground geometry Because the flute geometry is produced by precision grinding, the fully ground HSS-G Twist Drill offers sharper cutting edges and higher runout accuracy than rolled variants. This enables up to 40% faster drilling rates and requires significantly less thrust force, improving machine and operator efficiency when working with tougher materials. For workshop and industrial environments, this means higher throughput with less operator fatigue. Application range and recommended use Designed as a Type N (normal spiral) drill, this short Twist Drill is optimised for metalworking operations on materials such as steel, cast iron, sintered iron, copper, bronze and hard plastics. The 135° point angle reduces initial entry forces and improves centring for hard workpieces like stainless steel. Use with adequate cooling and secure clamping is recommended to prevent premature tool wear or breakage. Strong recommendation: Select the MetavCUT Twist Drill in HSS-G with TIN coating for reliable, precision metal drilling — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Short) Brand: MetavCUT SKU: 41033-FDA Diameter: 3.3 mm Point angle: 135° Type: Type N Colour/Coating: TIN-coated Execution: Short Shank finish: Fully ground Material: HSS-G Spiral length: 36 mm Overall length: 65 mm For drilling machine: Drilling Machine / Hand Drill Standard: DIN 338 Packaging unit: 10 pieces Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit this MetavCUT Twist Drill? Twist Drills like the MetavCUT Twist Drill are primarily used for machining holes in metal; this short Type N HSS-G drill with TIN coating is suitable for alloyed and unalloyed steel, Tempered Cast Iron, Gusseisen, Neusilber, Copper, Bronze and Hard Plastics, offering good lifetime under appropriate cooling. Which three drill types are commonly distinguished? Common drill categories include Metal drill bits, Wood drill bits and Masonry/Concrete drill bits; the MetavCUT Twist Drill belongs to the metal drill class and is optimised for that application.
3.3mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G 3.3 mm, 135° tip, Bright Finished (DIN 340) by MetavCUT The Twist Drill is a long‑version HSS‑G drill designed for precise, deep hole drilling in metal and for use with Drilling Machines and hand drills. Long design for deep or recessed holes HSS‑G ground for sharp, precise cutting 135° tip angle for harder materials DIN 340 long‑version geometry Suitable for Drilling Machines and hand drills Durable HSS‑G material for demanding metal work The long‑version HSS‑G construction provides a robust combination of hardness and cutting performance for machining steels and other metal materials. With the DIN 340 specification the drill is intended for deeper holes where stability and axial runout resistance matter. The ground flute geometry yields cleaner holes and improved concentricity, which reduces rework and ensures consistent fits for dowels, bushings or threaded inserts. Long format for deep or hard‑to‑reach bores A longer overall length with a spiral length of 69 mm and Total Length 106 mm enables access to bores that standard drills cannot reach without extensions. This extended design makes the tool especially suitable when the drilling point is recessed or the workpiece geometry limits straight‑in access. The reduced need for extensions or auxiliary tooling speeds up setup and keeps the machining process more efficient. Optimised geometry and tip for harder materials With a 135° tip angle the tool penetrates tougher materials with less tendency to wander and provides a flatter tip shape that suits stainless and alloyed steels. The fully ground shank and flute geometry support higher precision and surface quality in the hole. As a result, feed forces can be lower and tool life improved under appropriate cooling and machining parameters. Target users and typical applications Engineers, workshop technicians and maintenance professionals benefit from the long HSS‑G design when drilling in legated and unlegated steel, cast materials and hard plastics where clean holes and accurate positioning are required. The MetavCUT long Twist Drill suits fabrication shops, toolrooms and repair operations needing reliable drills for medium‑to‑deep metal bores. Choose the MetavCUT long HSS‑G Twist Drill for dependable deep‑hole performance and contact METAV Werkzeuge for tailored technical advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 53033-FDA Diameter: 3.3 mm Tip angle: 135° Execution: long Colour: Bright finished Material: HSS‑G Standard: DIN 340 Total length: 106 mm Spiral length: 69 mm Shank finish: fully ground Model series: Standard Line Application: Drills for metal Suitable for: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Twist Drill) is primarily applied to machining high‑strength materials and larger drill diameters; its design allows straightforward resharpening and it endures higher loads, making it suitable where robust, repeatable metal drilling is required. Which three drill types exist? Drill types commonly distinguished are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking tasks.
3.4mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Robuste HSS-Konstruktion, kurze Ausführung nach DIN 338 und ein präziser 3,4 mm Durchmesser sorgen für stabile, wirtschaftliche Metallbohrungen. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (kurzer HSS-Bohrer, Typ N) Der Spiralbohrer ist ein kurzer HSS-Bohrer für präzise Metallbohrungen mit Handbohrmaschine und stationären Werkzeugmaschinen. Kurze Ausführung nach DIN 338 für hohe Stabilität HSS-Material für legierten und unlegierten Stahl 3,4 mm Durchmesser für präzise Metallbohrungen 39 mm Spirallänge für sichere Späneförderung Zylinderschaft, geeignet für Handbohrmaschine Stabilität und Präzision bei Metallbohrungen Die kurze Bauart dieses Bohrers reduziert die Auskragung und erhöht dadurch die Stabilität beim Anbohren. Gefertigt aus HSS bietet der Bohrer eine gute Elastizität und weniger Bruchrisiko bei Bohrungen unter 6 mm, was gerade bei Serienarbeiten Zeit und Ausschuss spart. Die Einhaltung der DIN 338 gewährleistet zudem standardisierte Abmessungen und Kompatibilität mit gängigen Spannfuttern, sodass die Maschineinsatzzeit effektiv genutzt wird. Passende Anwendungen und Maschinenkompatibilität Als Bohrer des Typ N eignet sich das Werkzeug vor allem für Metall wie Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe. Durch die kurze Ausführung ist der Einsatz sowohl an stationären Werkzeugmaschinen als auch an handgeführten Bohrmaschinen möglich. Für Anwender bedeutet das: mehr Flexibilität in Werkstatt und Montage, ohne auf Präzision verzichten zu müssen. Die Verarbeitung ist auf Dauerbelastung ausgelegt, was die Wirtschaftlichkeit erhöht. Praxistipps für saubere Ergebnisse und lange Lebensdauer Ein Spitzenwinkel von 118° sorgt für einfaches Zentrieren und sauberen Spanabtrag in den meisten Werkstoffen. Für optimale Ergebnisse empfiehlt sich ein Vorstechen bei glänzenden Oberflächen und angemessene Schnittgeschwindigkeit für 3,4 mm Bohrungen. Kühlung und regelmäßiges Nachschleifen verlängern die Standzeit, während korrektes Spannfutterspiel die Genauigkeit erhält. So lassen sich saubere Bohrbilder bei reduziertem Werkzeugverschleiß erzielen. Verpackung, Abmessungen und Einsatzvorteile Der kurze Spiralbohrer ist in praktischer Verpackungseinheit zu 10 Stück erhältlich und bietet mit einer Gesamtlänge von 70 mm und einer Spirallänge von 39 mm eine gute Balance zwischen Handhabung und Arbeitstiefe. Die schwarze Oberfläche erleichtert die Erkennung im Werkzeugsortiment. Für Einkäufer bedeutet das: einfache Lagerung, schnelle Verfügbarkeit und planbare Nachbestellungen durch klare SKU-Angaben. Empfehlung: Setzen Sie auf den robusten HSS-Kurzspiralbohrer von MetavCUT für präzise Metallarbeiten; bei Fragen zur Auswahl oder zur Anwendung kontaktieren Sie Metav Werkzeuge per Email info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Technische Daten Artikelnummer: 40034-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Typ: Typ N Farbe: schwarz Werte Durchmesser: 3,4 mm Gesamtlänge: 70 mm Spirallänge: 39 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS Norm: DIN 338 Schaft: Zylinderschaft Geeignet für: Handbohrmaschine SKU: 40034-FDA FAQ Wie eignet sich der Spiralbohrer für verschiedene Metalle? Der Spiralbohrer von MetavCUT (Spiralbohrer, Typ N, SKU 40034-FDA) ist aus HSS gefertigt und eignet sich gut für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; bei sehr harten Werkstoffen sind angepasste Schnittparameter empfehlenswert. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der kurze Spiralbohrer von MetavCUT ist mit Zylinderschaft ausgeführt und eignet sich für den Einsatz an Handbohrmaschinen sowie an stationären Werkzeugmaschinen. Welche Rolle spielt der Spitzenwinkel von 118°? Der Spitzenwinkel von 118° des MetavCUT Spiralbohrers sorgt für gutes Zentrierverhalten und sauberen Spanabtrag in Standardmetallen, was insbesondere bei Durchmessern wie 3,4 mm zu präzisen Ergebnissen führt. In welcher Verpackungseinheit wird der Bohrer geliefert? Der Spiralbohrer von MetavCUT (Bezeichnung Spiralbohrer, SKU 40034-FDA) wird in einer praktischen Verpackungseinheit zu 10 Stück angeboten, ideal für Werkstattbedarf und kleinere Serien. Wie lang ist die Spirallänge und warum ist das wichtig? Die Spirallänge beträgt 39 mm; diese Länge unterstützt eine sichere Späneförderung bei typischen Metallbohrungen und reduziert die Gefahr von Verstopfungen bei Hand- und stationärem Gebrauch.
3.4mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — 3.4 mm, 135° Tip, HSS-G, Double‑Sided, Bright Finished The Body Drill is a double‑sided Twist Drill by MetavCUT for metalworking in Drilling Machines, designed for precise holes in sheet and solid materials. Body Drill 3.4 mm Diameter for metal applications Double‑Sided design for continued use when one tip dulls HSS‑G Material for sharp cutting and high roundness Fully ground shank for accurate runout and precise holes 135° Tip Angle optimized for harder materials like stainless steel High performance through advanced HSS‑G geometry This Twist Drill uses HSS‑G Material and a 135° Tip Angle, delivering a clear benefit: reduced bit walking and improved centring on hard surfaces. The Ground flute geometry produces very sharp cutting edges and excellent Roundness, which supports faster, cleaner holes in Steel and Cast Iron. For users who demand repeatable precision, this configuration minimises rework and improves hole quality with less manual alignment. Durable, practical design for workshop use A Double‑Sided execution means the tool functions like two bits in one: if one tip becomes blunt, the bit can be reversed and the second tip used immediately. The Fully Ground Shank ensures low runout in Chucks and improved concentricity, which is particularly useful for bodywork and sheet‑metal tasks. This short, stable design is well suited to operations where compactness and rigidity reduce vibration and improve finish. Targeted applications and material suitability Engineered for metalworking, the drill is recommended for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics. Its geometry makes it a reliable choice for technicians working on automotive body panels, fabrication shops and maintenance tasks. When the task demands clean holes in tougher substrates, this Twist Drill offers the necessary cutting geometry and rigidity to meet professional expectations. Handling advice to maximise tool life and hole quality To achieve optimal results with this Body Drill, apply appropriate cutting fluid and moderate feed to avoid excessive heat; the Ground construction yields sharp edges but can be more brittle than rolled tools. Using a Drill Press or stable Drilling Machine is advisable for deeper or critical holes. The 135° Tip reduces initial penetration forces and improves centring on hard materials, so adjusting feed and speed to the workpiece increases lifetime and hole quality. We recommend MetavCUT’s Body Drill for demanding metalwork — for personalised technical advice or to check suitability for specific applications please contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Bezeichnung: Body Drill Marke: MetavCUT SKU: 58034-FDA Label: Karosseriebohrer Ausführung: double sided Farbe: bright finished Für Bohrmaschine: Drilling Machine Spiral Length: 10 Spitzenwinkel: 135° Durchmesser: 3,4 Gesamtlänge: 46 Material: HSS-G Schaft Ausführung: fully ground Modellserie: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Body Drill from MetavCUT and which machines suit it? The MetavCUT Body Drill (Twist Drill) is designed primarily for metalworking and is best used in a stable Drilling Machine or Drill Press; it performs well on sheet and solid metal components and offers improved centring due to its geometry. Can the MetavCUT Body Drill (Twist Drill) be used for different metals and plastics? Yes, the MetavCUT Body Drill is suitable for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics; its HSS‑G construction and 135° Tip Angle are chosen to handle a variety of tougher materials effectively. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. The design is relatively easy to grind and withstands higher loads, making it suitable for bodywork and thin‑sheet holes. Which three drill types exist? There are Metal Drills, Wood Drills and Stone/Concrete Drills, each optimised in geometry and cutting edge for their respective material groups. Why are Twist Drills sharpened at the tip? Sharpening the tip reduces the cross‑cut at the point of the Twist Drill, significantly lowering friction and the required feed force while improving the bit’s ability to centre in the workpiece. Can you drill wood with a Twist Drill? A Metal Drill can be used in wood, but guidance and finish are inferior compared with dedicated Wood Drills. Metal Drill bits are easier to resharpen and have lower self‑feed tendencies. For which drilling depths is the Twist Drill the most used tool? A solid bore is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are inherently superior to standard HSS is incorrect; the decision should be based on actual working conditions and whether they justify the higher price of HSSE for the intended application.
3.4mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill Type N — 3.4 mm, 135° Point Angle, Extra Short, Bright Finished, HSS‑G (DIN 1897) by MetavCUT The Twist Drill Type N is an extra‑short HSS‑G drill bit designed for Hand Drilling Machines, optimised for precise metalworking in tight spaces. Extra‑short design for greater stability 135° point angle for Harder Materials HSS‑G: up to 40% faster drilling Cylindrical shank fits standard chucks DIN 1897 compliant for consistent fit Faster metal drilling with lower feed force The Twist Drill delivers high efficiency when working with alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics. Thanks to its HSS‑G material and the ground geometry, drilling can be performed up to 40% faster while requiring significantly less axial force. This means shorter cycle times and reduced operator fatigue when performing repetitive holes in demanding materials. Extra‑short geometry increases stability and reduces breakage The extra‑short execution offers a shorter overall length and reduced flute length compared with standard DIN 1897 bits, which improves torsional resistance and lowers the risk of breakage. This design is particularly advantageous for drilling in thin‑walled components or when working in confined setups where a long tool would be impractical. The compact geometry supports controlled chip evacuation and steadier hole starts. 135° point angle and Type N spiral explained A 135° point angle is suited for harder workpiece materials because it reduces the tendency to wander and shortens the initial bite time. The Type N designation denotes the classic normal spiral for metalworking; it is designed for efficient chip removal in metal and stable machining of tougher alloys. For users less familiar with these terms: the point angle determines entry behaviour, and a larger angle generally improves centring and reduces required thrust for hard materials. Universal shank and compatibility with hand drills The cylindrical shank ensures compatibility with standard three‑jaw chucks, offering universal clamping for workshop and maintenance applications. As a result, the bit is well suited to Hand Drilling Machines and Angle Drills. Note that a smooth round shank can be more prone to slipping under very high torque compared with keyed or hex shanks; use appropriate chuck clamping to prevent slippage. Who benefits from this short HSS metal drill This short Twist Drill is aimed at technicians, mechanics and maintenance personnel who need reliable, fast holes in metal under space constraints. It is a practical choice for fabricators working with sheet metal, profile sections and machine repair tasks where a robust, short tool reduces vibration and breakage risk. For hobbyists, it offers easier handling when access to the workpiece is restricted. MetavCUT recommends this Type N Twist Drill for precision metalworking in confined setups — for expert guidance and to confirm suitability contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com; ☎️ +49 2822 7131930; ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 56034-FDA Diameter: 3.4 mm Point Angle: 135° Execution: Extra short Colour / Finish: Bright finished Material: HSS‑G Type: Type N Shaft Design: Cylindrical shank Overall Length: 46 mm Spiral Length / Flute Length: 16 mm Applicable Machine: Hand Drilling Machine (Drilling Machine) Application: Drills for metal Standard: DIN 1897 Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is primarily intended for metalworking and performs well in alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics; its HSS‑G composition and Type N spiral optimise chip removal and tool life in these materials. Can the Twist Drill be used in an angle drill or only in straight hand drills? The Twist Drill with a cylindrical shank is designed to be clamped in standard three‑jaw chucks, so it is compatible with both straight Hand Drilling Machines and many Angle Drills; ensure secure clamping to avoid slippage under higher torque. For what is a Twist Drill used? It is mainly applied to the machining of high‑strength workpieces and larger drill diameters. The Twist Drill geometry is easy to regrind and withstands higher loads. Which three drill types exist? There are Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills sharpened (pointed)? Sharpening reduces the cross‑cut at the tip of the Twist Drill, which significantly lowers friction and therefore requires lower feed forces while improving centring in the workpiece. Can you drill wood with a Twist Drill? A Metal drill can be used in wood, but guidance is poorer and the hole finish is less clean; however, such bits are easier to resharpen and show lower self‑feeding tendency. For which drill depths is the Twist Drill most used? A through hole in solid material is typically performed with a Twist Drill. For diameters up to 20 mm and drill depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common belief that HSSE steels are categorically superior to standard HSS is incorrect; consider your working conditions carefully to decide whether the higher cost of HSSE is justified.
3.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus kurzer Ausführung, HSS‑G Geschliffenem Material und dem 135° Spitzenwinkel sorgt für hohe Stabilität, schnelle Vorschübe und saubere Metallbohrungen; bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie bei Bedarf die technische Beratung an. Spiralbohrer von MetavCUT, Typ N, 3,4 mm Der Spiralbohrer ist als kurze Ausführung nach DIN 338 konzipiert und eignet sich für präzise Metallbohrungen an stationären und Handmaschinen. Kurze Ausführung für höhere Stabilität Geschliffenes HSS‑G für schnellere Schnittgeschwindigkeit Spitzenwinkel 135° für harte Werkstoffe Normgerechte Fertigung nach DIN 338 Zylinderschaft, geeignet für Handbohrmaschine Präzision und Stabilität bei Metallbohrungen Dank der kurzen Auskraglänge reduziert sich das Risiko von Durchbiegung und Vibration, wodurch das Bohrbild deutlich präziser ausfällt. Diese Eigenschaft macht den Bohrer besonders geeignet für präzise Bohrungen in legiertem und unlegiertem Stahl sowie in Gusswerkstoffen. Wer Wert auf wiederholgenaue Bohrungen legt, profitiert von der gesteigerten Rundlaufgenauigkeit und der höheren Standzeit bei moderater Kühlung. Materialqualität und Schnittleistung erklären Die HSS‑G Ausführung bedeutet, dass die Geometrie durch Schleifen erzeugt wurde, was scharfe Schneiden und saubere Spanabfuhr ermöglicht. Geschliffene Bohrer bohren laut Herstellerangaben bis zu 40 % schneller und benötigen etwa 50 % weniger Anpresskraft gegenüber herkömmlichen HSS‑Bohrern, was die Arbeitseffizienz erhöht und die Maschinenbelastung reduziert. Der Begriff HSS‑G steht für Schnellarbeitsstahl, geschliffen, und eignet sich besonders für harte Werkstoffe, sofern Kühlung eingesetzt wird. Einsatzbereiche, Maschinenwahl und Zielgruppe Die kurze Ausführung dieses Werkzeugs ist ideal für Werkstätten, Montagebetriebe und Präzisionsanwender, die sowohl mit stationären Säulenbohrmaschinen als auch mit kräftigen Handbohrmaschinen arbeiten. Für Benutzer, die in Stahl, Gusseisen oder Hartkunststoff bohren, bietet der Spiralbohrer eine robuste Lösung. Bei sehr tiefen Bohrungen oder hochgehärteten Materialien empfiehlt sich die Nutzung spezialisierter Vollhartmetallwerkzeuge oder Mehrstufenaufbohrverfahren. Hinweise zur Anwendung und zum Spitzenwinkel Der 135° Spitzenwinkel reduziert das Ausbrechen beim Anbohren härterer Werkstoffe und verkürzt die Anbohrzeit. Bei der Materialwahl ist zu beachten, dass geschliffene Bohrer empfindlicher gegen seitliche Belastung sind; deshalb ist ein zentrisches Anspitzen oder das Vorbohren bei größeren Durchmessern zu empfehlen. Bei unsachgemäßer Handhabung kann die Bruchgefahr steigen, daher ist kontrollierte Kühlung und moderate Vorschubkraft ratsam. Empfehlung: Den geschliffenen HSS‑G Spiralbohrer von MetavCUT für präzise Metallbearbeitung wählen und bei Fragen die technische Beratung von Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Fakten Durchmesser: 3,4 mm Gesamtlänge: 65 mm Spirallänge: 36 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Artikelnummer: 48034-FDA Marke: MetavCUT Serie: Profi Line Material: HSS-G Norm: DIN 338 Typ: Typ N Schaft: geschliffen Ausführung: kurz Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Welche Werkstoffe lassen sich mit dem Spiralbohrer von MetavCUT sicher bearbeiten? Der Spiralbohrer von MetavCUT in HSS‑G Ausführung eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen sowie Nichteisenmetalle und Hartkunststoff; bei harten Werkstoffen verbessert der 135° Spitzenwinkel die Anbohrleistung. Ist der Bohrer für Handgebrauch an Akkubohrern geeignet? Ja, der Zylinderschaft und die kurze Ausführung machen den Spiralbohrer von MetavCUT für kräftige Handbohrmaschinen geeignet, wobei kontrollierte Vorschubkraft und Kühlung empfohlen werden. Warum ist geschliffen (HSS‑G) besser für Metall als gewalzte Bohrer? Geschliffene HSS‑G Bohrer bieten schärfere Kanten und höhere Rundlaufgenauigkeit, was saubere Bohrlöcher in Metall ermöglicht; der Nachteil ist eine höhere Sprödigkeit, daher ist stationärer Einsatz mit Kühlung vorteilhaft. Gibt es eine Norm, die die Bauform dieses Bohrers beschreibt? Ja, die Fertigung orientiert sich an der Norm DIN 338, die kurze Spiralbohrer mit Zylinderschaft klassifiziert und Dimensionen sowie Ausführungen definiert. Welche SKU hat dieser Spiralbohrer, falls Ersatz benötigt wird? Die Artikelnummer lautet 48034-FDA, Marke MetavCUT, Serie Profi Line; diese Informationen helfen bei Nachbestellung und technischen Rückfragen.
3.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 3.5 mm, 118°, short, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N is a compact metal-drilling bit designed for precise work with a Drilling Machine or Hand Drill, offering a 3.5 mm diameter and a 118° tip angle for reliable centring and clean holes. HSS construction for durable metal drilling Short design per DIN 338 for high stability 118° tip angle for better centring on curved surfaces 3.5 mm diameter for precise, small-diameter holes Suitable for use with a Hand Drill and Drilling Machine Precision and Material Strength for Consistent Results The HSS composition delivers a combination of durability and elasticity that reduces breakage risk during typical metalworking tasks. With the 3.5 mm diameter and a 118° tip angle, the bit penetrates smoothly while maintaining accurate centring. Compliance with DIN 338 ensures consistent geometry and reliable production tolerances, making this short Twist Drill a trustworthy choice for repeatable hole quality in demanding shop environments. Short Geometry for Maximum Stability and Accuracy A short overall length and a reduced protrusion from the chuck minimise bending and vibration, improving concentricity and hole accuracy. The 39 mm spiral length and 70 mm overall length are optimised to reduce runout when used in a Drilling Machine or Hand Drill, especially for smaller diameters. This means less rework, faster setup and more precise holes when working on components where tight tolerances matter. Optimised for Metalworking — Versatile Application Range The Type N spiral profile is the classic choice for metal; the High Speed Steel manufacturing makes the bit suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. For small diameters under 6 mm the roll-formed HSS construction reduces the chance of breakage and supports steady drilling performance. Users benefit from a tool engineered to handle standard metal-processing tasks efficiently and with predictable tool life. Who Benefits and Where to Use It This Twist Drill is aimed at professional workshops, maintenance technicians and precision hobbyists who require reliable, short-length metal-drilling performance. The compact design is especially advantageous in confined setups or on jigged components where minimal overhang is critical. Backed by the MetavCUT brand, customers gain access to technical guidance and support through METAV Werkzeuge for any application questions or complex requirements. For precision metalworking choose the MetavCUT Twist Drill Type N — for tailored advice and expert consultation contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40035-FDA Diameter: 3.5 mm Spiral length: 39 mm Overall length: 70 mm Tip angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: short Colour: black Application: Drills for metal / For Drilling Machine (Hand Drill) Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill Type N from MetavCUT suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; its HSS composition allows drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics while offering dependable wear resistance and consistent hole quality. How does the short execution of this MetavCUT Twist Drill improve drilling results? A short Twist Drill from MetavCUT reduces overhang and bending, which increases stability and concentricity during drilling, resulting in cleaner holes and less tool deflection when used in a Drilling Machine or Hand Drill. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high-strength materials and for larger drill diameters. Its shape is easy to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross-cut at the tip of the Twist Drill, which lowers friction and required feed forces; this also improves centring of the tip in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but guidance and finish are inferior compared with wood-specific bits; however, metal bits are easier to resharpen and show less self-feeding tendency. For which drilling depths is the Twist Drill most commonly used? Solid drilling is typically executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect; choose based on actual working conditions and whether the performance justifies higher cost.
3.5mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill – Short Type N, 3.5 mm, 135°, 5% Cobalt-Alloyed, HSS‑E, Fully Ground, DIN 338 (MetavCUT) The Twist Drill is a short Type N drill designed for precise metalworking in hand drills and drilling machines. Short design for high stability and precision 3.5 mm diameter for fine, precise holes 135° tip for harder materials like stainless steel 5% cobalt-alloyed HSS‑E for increased wear resistance Fully ground flutes for clean, accurate holes Engineered for precise metal drilling with reduced flex This short Twist Drill is optimised for metal applications where dimensional accuracy matters. With a 3.5 mm diameter and a 135° point angle, it reduces walking on hard surfaces and shortens the pilot time when entering stainless steel or other tough alloys. The geometry follows DIN 338, which classifies short HSS drills with a cylindrical shank. As a result, users benefit from repeatable hole position and improved concentricity when working on both stationary and portable machines. Short length and fully ground construction for stability The reduced overall length and shorter overhang translate into less deflection and improved control during drilling. The 39 mm spiral length and 70 mm overall length keep the cutting forces close to the chuck, while the Fully Ground flute geometry ensures a sharp cutting edge and excellent roundness of the hole. This combination is particularly helpful for precision tasks and reduces the risk of chattering when drilling through thicker or harder sections of metal. Material selection and wear resistance for demanding tasks Manufactured from HSS‑E with 5% cobalt-alloyed composition, this short spiral drill offers enhanced red hardness and wear resistance compared with standard HSS. The cobalt addition supports higher cutting temperatures and extends tool life in continuous or interrupted cutting conditions. Being a Type N (normal spiral) geometry, it is primarily aimed at metalworking; the flute design facilitates reliable chip evacuation for cast iron, alloyed and unalloyed steel, and many non‑ferrous metals. Practical recommendations for safe, accurate use For best results clamp the workpiece securely, select appropriate spindle speeds and use coolant for stainless and other heat‑resistant alloys. The short design suits precise workshop tasks, maintenance and production runs where hole quality and repeatability are priorities. A short spiral drill is less suitable for deep, through‑holes beyond its flute capacity; for deeper holes consider a longer, purpose‑designed drill. MetavCUT's short design is ideal for users seeking controlled, clean holes with reduced breakage risk when used with adequate support and cooling. We recommend MetavCUT's short Twist Drill for demanding metalworking — for tailored technical advice contact METAV Werkzeuge: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271. Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 47035-FDA Type: Type N Diameter: 3.5 mm Point angle: 135° Spiral length: 39 mm Overall length: 70 mm Execution: Short Shaft finish: Fully Ground Material: HSS‑E Cobalt content / Colour: 5% cobalt-alloyed For machine: Drilling Machine / Hand Drill Model series: Standard Line Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT (Type N) suitable for? The MetavCUT Twist Drill (Type N) is primarily intended for metalworking; its HSS‑E composition with 5% cobalt‑alloying makes it suitable for alloyed and unalloyed steel, cast iron and many non‑ferrous metals. For stainless steel or other heat‑resistant materials use cutting fluid and moderate speed to preserve tool life. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for metal applications rather than woodworking or masonry.
3.5mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Bestellen sie den Karosseriebohrer für präzise Blech- und Stahlbohrungen mit geschliffener HSS‑G Geometrie und 135° Spitzenwinkel; die doppelseitige Ausführung erlaubt schnelles Umdrehen bei stumpfer Spitze und reduziert Stillstandzeiten, die kompakte Gesamtlänge sorgt für stabile Führung in Handbohrmaschine-Anwendungen. Bestellen sie den Karosseriebohrer direkt über Metav Werkzeuge oder fragen sie unsere Beratung bei Bedarf an. Karosseriebohrer von MetavCUT (Profi Line) Der Karosseriebohrer ist ein geschliffener HSS‑G Doppelendbohrer für präzise Blech‑ und Stahlbohrungen bei Handbohrmaschine Einsätzen Doppelendbohrer: Zwei Bohrspitzen in einem Werkzeug Geschliffenes HSS‑G für präzise Metallbohrungen 135° Spitzenwinkel für harte Werkstoffe geeignet Geeignet für Handbohrmaschine und Blecharbeiten Kompakte Länge 55 mm mit 13 mm Spirallänge Hohe Schnittqualität durch geschliffene HSS‑G Geometrie Die geschliffene HSS‑G Geometrie gewährleistet sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Legierungen und unlegiertem Stahl bewirkt. Durch den 135° Spitzenwinkel reduziert sich das Ausbrechen an der Austrittskante bei harten Werkstoffen, sodass weniger Nacharbeit nötig ist. Ein weiterer Vorteil ist die bessere Spanbildung bei kurzen Spiralen, was die Standzeit bei stationärer Kühlung verlängert. Praktischer Nutzen der doppelseitigen Ausführung Als Doppelendbohrer bietet das Werkzeug zwei nutzbare Enden, wodurch ein schneller Wechsel bei stumpfer Spitze entfällt und die Produktivität in Serien‑ oder Montagearbeiten steigt. Die kompakte Bauform unterstützt stabile Führung auf dünnen Blechen und sorgt für weniger Verkantungen in der Handbohrmaschine, was insbesondere bei Niet‑ und Karosseriearbeiten relevant ist. Einsatzbereiche und Maschinenkompatibilität Der Karosseriebohrer ist für Bohrungen in Temperguss, Gusseisen, Nichteisenmetalle und Hartkunststoff geeignet und wurde für den Einsatz mit der Handbohrmaschine konzipiert. Die 13 mm Spirallänge bei 55 mm Gesamtlänge eignet sich besonders für Durchgangsbohrungen in dünnen bis mittleren Blechen. Bei tieferen oder hochwertigen Werkstücken empfiehlt sich stationäre Kühlung und Vorbohren gemäß Werkstoffanforderung. Handhabung, Pflege und Anwendungsempfehlungen Für optimale Ergebnisse sollte mit moderater Vorschubkraft und passender Kühlschmierstoffzufuhr gearbeitet werden; die geschliffene Schaftausführung erhöht die Steifigkeit, verlangt aber sorgfältige Positionierung vor dem Anbohren. Bei wiederholtem Einsatz in harten Werkstoffen empfiehlt sich regelmäßige Überprüfung der Schneidengeometrie und gegebenenfalls Nachschärfen oder Austausch, um Bruchgefahr zu minimieren. Die MetavCUT Profi Line Karosseriebohrer empfehlen wir für präzise Blecharbeiten; Bestellungen und technische Beratung per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Bezeichnung: Karosseriebohrer Marke: MetavCUT Serie: Profi Line SKU: 59035-FDA Fakten Durchmesser: 3,5 mm Gesamtlänge: 55 mm Spirallänge: 13 mm Spitzenwinkel: 135° Besonderheiten Material: HSS‑G Ausführung: doppelseitig (Doppelendbohrer) Schaft: geschliffen Farbe: schwarz ohne Fase Verwendung: Handbohrmaschine Verpackungseinheit: 10 Stück Anwendung: Bohrer für Metall FAQ Für welche Materialien eignet sich der Karosseriebohrer am besten? Der MetavCUT Karosseriebohrer mit HSS‑G Geometrie eignet sich besonders für unlegierten Stahl, legierten Stahl, Gusseisen, Nichteisenmetalle und Hartkunststoff; die Kombination aus 135° Spitzenwinkel und geschliffener Schneide sorgt für saubere Bohrlöcher in diesen Werkstoffen. Kann der Karosseriebohrer in einer Handbohrmaschine verwendet werden? Ja, die Ausführung des Karosseriebohrers ist auf die Verwendung in einer Handbohrmaschine ausgelegt; durch die kompakte Gesamtlänge von 55 mm und die geschliffene Schaftgeometrie erhält die Bohrung zusätzliche Stabilität bei Handbetrieb. Was bedeutet doppelseitig beim Karosseriebohrer und welchen Vorteil bringt das? Doppelseitig bedeutet, dass der Karosseriebohrer an beiden Enden eine Bohrspitze hat, was einem schnellen Umdrehen bei stumpfer Spitze gleichkommt und damit Ausfallzeiten reduziert; dieses Merkmal ist besonders nützlich in Montage‑ und Karosserieanwendungen. Wie wirkt sich der Spitzenwinkel von 135° auf die Bohrleistung aus? Der 135° Spitzenwinkel des MetavCUT Karosseriebohrers verringert das Einbruchrisiko an der Austrittskante und eignet sich daher besser für härtere Werkstoffe, wodurch die Nacharbeit an der Bohrstelle reduziert wird. Welche Pflegehinweise sind für den Karosseriebohrer empfohlen? Für lange Standzeiten sollte der Karosseriebohrer trocken gehalten und bei Bedarf mit Kühlschmierstoff verwendet werden; regelmäßige Sichtprüfung der Schneiden und gegebenenfalls Nachschärfen verlängern die Einsatzzeit und reduzieren Bruchrisiko.
3.5mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer (Body Drill) — 3.5 mm, 135° Tip, Double‑Sided, Bright Finished, Fully Ground, HSS‑G The Karosseriebohrer is a precision Body Drill designed for metalworking applications, offering a 3.5 mm Diameter, 135° Point Angle and a double‑sided execution with a bright finished surface and fully ground shaft for reliable performance. Double‑ended design for extended tool life Fully ground HSS‑G for precise, clean holes 135° Point Angle optimised for harder metals Suitable for Drilling Machine and Hand Drill use Compact overall length of 55 mm for confined spaces Maximum cutting performance with fully ground HSS‑G The fully ground HSS‑G construction delivers a clear benefit: faster penetration and improved hole quality in metal. CNC grinding creates sharp cutting edges and high concentricity, which reduces wobble and produces clean, round holes. For users requiring precise results in alloyed or unalloyed Steel, Cast Steel, Cast Iron or non‑ferrous Metals, this basis of construction reduces the needed feed force and raises productivity without sacrificing accuracy. Double‑ended design for practical durability in bodywork A double‑sided, short Twist Drill is particularly practical in sheet‑metal and body applications: when one tip becomes blunt, the tool can simply be reversed, offering effectively two operational ends. This space‑saving and cost‑efficient solution is well suited for work on thin sheets, rivet holes and repair operations where quick tool change and robustness matter. 135° point for harder materials and stable centring The 135° Point Angle reduces walking and offers better centring on harder materials like stainless Steel; a larger tip angle shortens the time to engage the workpiece. When paired with the ground flute geometry, this Karosseriebohrer achieves lower friction at the tip and more consistent chip evacuation. For demanding drilling tasks, combine coolant and moderate speeds to balance performance and tool life. Designed for professionals in confined and metalworking environments With an overall length of 55 mm and a 3.5 mm Diameter, this tool from the Standard Line by MetavCUT is aimed at metalworkers, bodyshop technicians and maintenance professionals who require compact, reliable Twist Drills for production and repair. The bright finished surface supports smooth insert and removal, while the robust geometry keeps cycle times short and hole quality high. Choose the MetavCUT Karosseriebohrer with 135° Point Angle for dependable metal drilling — for tailored advice or specification support METAV Werkzeuge provides expert consultation by eMail at info@metav-werkzeuge.com, by Phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Karosseriebohrer Marke: MetavCUT SKU: 58035-FDA Diameter: 3.5 mm Overall Length: 55 mm Spiral Length: 13 mm Point Angle: 135° Execution: Double‑sided Shaft Finish: Fully ground Material: HSS‑G For Machine: Drilling Machine / Hand Drill Colour: Bright finished Model Series: Standard Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Karosseriebohrer Twist Drill used for? The Karosseriebohrer from MetavCUT is a Twist Drill primarily used for machining high‑strength materials and larger drill diameters in metalworking. Its double‑ended design and ground HSS‑G geometry make it suitable for bodywork, thin‑sheet holes and tasks that demand quick reversal of a blunt tip while maintaining precision. Which 3 drill types are there? There are three common drill categories: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Karosseriebohrer is classified as a Metal drill (Twist Drill) tailored to metal applications rather than wood or masonry.
3.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Die Kombination aus HSS-G-Geschliff, Gesamtlänge 165 mm und Tieflochspirale ermöglicht präzise und tiefe Bohrungen in Stahl und Gusswerkstoffen; die geschliffene Ausführung reduziert Anpresskraftbedarf und verbessert die Rundlaufgenauigkeit. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 3,5 mm (MetavCUT) – extra lang Der Spiralbohrer ist für tiefe Bohrungen in Metall konzipiert und eignet sich für Handbohrmaschine und stationäre Anwendungen, insbesondere bei legierten und unlegierten Stählen. Geschliffener HSS-G für saubere Bohrlöcher Extra lange Gesamtlänge 165 mm für tiefe Bohrungen 135° Spitzenwinkel für harte Werkstoffe Tieflochspirale für verbesserte Spanabfuhr Geeignet für Handbohrmaschine und stationäre Maschinen Präzision und Materialeigenschaften für saubere Bohrlöcher Der geschliffene HSS-G-Schaft sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere und maßhaltige Bohrlöcher in Stahl, Gussstahl und Gusseisen ermöglicht. Die CNC-geschliffene Geometrie reduziert das Wandern beim Anbohren und erhöht die Standzeit unter kontrollierten Bedingungen. Für das Bohren in schwer zerspanbaren Werkstoffen empfiehlt sich die Verwendung von Kühlschmierstoff, um Hitzeentwicklung zu minimieren und die Bruchgefahr bei geschliffenen Kanten zu verringern. Tiefe Bohrungen sicher und wirtschaftlich ausführen Mit einer Gesamtlänge 165 mm und einer Spirallänge 115 mm ist dieser Spiralbohrer speziell für extra tiefe Bohrungen ausgelegt, bei denen Standardlängen nicht ausreichen. Die Tieflochspirale verbessert die Spanabfuhr auch bei längeren Bohrungen, reduziert Nacharbeit und erhöht die Prozesssicherheit. Bei sehr tiefen Löchern empfiehlt sich die schrittweise Bohrung und regelmäßige Spanableitung, damit die effiziente Schnittfähigkeit erhalten bleibt. Optimierte Geometrie für harte Werkstoffe Der 135° Spitzenwinkel verkürzt die Anbohrphase in harten Werkstoffen und reduziert den Vorschubbedarf; das resultiert in bis zu 40 % schnellerem Bohren und bis zu 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten unter ähnlichen Bedingungen. Diese Vorteile machen den Bohrer zur wirtschaftlichen Wahl für anspruchsvolle Metallbearbeitung, insbesondere wenn saubere Passungen und genaue Bohrmaße gefordert sind. Praxisempfehlung für Werkstatt und Montage Der Durchmesser positioniert den Bohrer im Standard-Bereich, ideal für den Alltag in Werkstatt, Montage und DIY-Projekten. Vor dem Bohren wird punktuelles Anreißen empfohlen, um das Wandern zu vermeiden; bei legierten Stählen ist Kühlschmierstoff sinnvoll. Für stationäre Arbeiten liefert die Kombination aus geschliffener Schaftausführung und stabiler Aufnahme die beste Performance, während bei Handbohrmaschine auf ruhige Führung und angemessene Drehzahl geachtet werden sollte. Empfehlen wir: Den MetavCUT Spiralbohrer als solide Lösung für tiefe Metallbohrungen direkt über Metav Werkzeuge bestellen oder unsere technische Beratung per eMail info@metav-werkzeuge.com kontaktieren Produktmerkmale Artikelnummer: 32035-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: extra lang Modellserie: Standard Line Daten Durchmesser: 3,5 mm Gesamtlänge: 165 mm Spirallänge: 115 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen, hohe Schärfe) Norm: DIN 1869 Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall SKU: 32035-FDA FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer mit HSS-G-Material und 135° Spitzenwinkel eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen und Nichteisenmetalle sowie Hartkunststoff; bei zähen Werkstoffen wird Kühlschmierstoff empfohlen. Ist der Bohrer für Handgebrauch geeignet? Ja, der Bohrer ist für die Verwendung mit Handbohrmaschine geeignet, da der Durchmesser in den Standard-Bereich fällt; dennoch empfiehlt sich bei tiefen Bohrungen eine stationäre Führung oder ruhige Handhabung zur Vermeidung von Verkantung. Welche Vorteile bringt die geschliffene Ausführung? Die geschliffene Schaftausführung des Spiralbohrers sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was präzisere Bohrlöcher und eine effizientere Spanabfuhr ermöglicht; als Trade-off ist eine kontrollierte Anwendung und Kühlung ratsam. Wie tief darf ich mit diesem Bohrer sicher bohren? Dank der Tieflochspirale und der langen Arbeitslänge sind extra tiefe Bohrungen möglich; für sehr tiefe Löcher empfiehlt sich schrittweises Aufbohren und regelmäßige Spanableitung, um Verstopfungen zu vermeiden. Worauf ist bei der Drehzahl und dem Vorschub zu achten? Bei härteren Werkstoffen wie legiertem Stahl reduziert der 135° Spitzenwinkel die Anbohrzeit, dennoch sollten Drehzahl und Vorschub materialgerecht angepasst werden und Kühlschmierstoff eingesetzt werden, um die Standzeit zu erhöhen.
3.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — HSS‑G Extra Long, 3.5 mm, 135° (Bright Finished, Fully Ground Shank, DIN 1869) The Twist Drill is an extra‑long HSS‑G metal drill designed for deep, precise holes in hard materials when used with a Drilling Machine. Extra‑long design for deep hole drilling HSS‑G for high performance in hard metals 135° Point Angle for stainless steel and alloys Fully ground shank for concentricity and precision DIN 1869 standard for demanding industrial use Faster penetration and lower feed force for efficient machining The Twist Drill from MetavCUT combines an HSS‑G material composition with a ground flute geometry that enables up to 40% faster drilling and requires approximately 50% less feed force compared with conventional HSS drills. This efficiency reduces operator effort and tool wear during repetitive Metalworking tasks, making it particularly suitable for workshops and maintenance operations where throughput matters. The performance advantage translates directly into shorter cycle times and more predictable production. Precise holes thanks to CNC grinding and optimised point geometry A fully ground shank and flutes produce a very sharp cutting edge and excellent run‑out behaviour, resulting in cleaner, more accurate holes in tough materials. The 135° Point Angle is optimised for harder materials such as Stainless Steel and alloyed Steels, shortening initial entry time and improving centring. For users unfamiliar with grinding terminology: “fully ground” means the flutes are shaped by CNC grinding rather than rolled, which yields higher concentricity and superior hole finish at the cost of higher brittleness under misuse. Built for deep and hard‑to‑reach drilling applications With an Overall Length of 210 mm and a Spiral Length of 145 mm, this extra‑long design is intended for deep hole drilling and access into recessed or hard‑to‑reach areas. The geometry follows DIN 1869 for deep‑hole twist drills and is frequently employed for diameters up to 20 mm and depths approaching 100 mm in many metalworking scenarios. Users should employ adequate clamping and coolant when drilling deep holes to preserve tool life and maintain hole quality. Clear suitability and targeted user groups This tool addresses the needs of professional machinists, maintenance technicians, toolroom staff and industrial workshops that require reliable metal drilling performance. The combination of HSS‑G material, sharp CNC grinding and a specialised point angle makes it a good choice for drilling Legated and Unlegated Steel, Cast Iron, Sintered Iron and certain Non‑Ferrous Metals. For hobbyists, the drill can be used in a bench or hand Drilling Machine when setup and coolant are applied correctly. For demanding deep‑hole metalworking we recommend MetavCUT’s extra‑long Twist Drill — for individual technical advice and application support contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33035-FDA Model Series: Standard Line Diameter: 3.5 mm Overall Length: 210 mm Spiral Length: 145 mm Point Angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: Extra long Shank Finish: Fully ground Finish / Colour: Bright finished For Machine: Drilling Machine (Hand Drill) Application: Drills for Metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily applied in the machining of high‑strength materials and when larger drill diameters are required; its form is easy to sharpen and it withstands substantial loads, which makes it suitable for demanding Metalworking tasks. Which three basic drill types exist? For general use, drill types are categorised as Metal Drill, Wood Drill and Stone/Masonry Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metals. Why are Twist Drill tips often re‑ground? Re‑grinding the tip of a MetavCUT Twist Drill reduces the cross‑cut at the tip, lowering friction and thus the required feed force while improving centring and drilling control. Can a Metal Twist Drill be used for Wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with dedicated Wood Drills; however, Metal Drills are easier to re‑sharpen and show less self‑feeding tendency.
3.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der MetavCUT Spiralbohrer in HSS-G-Ausführung kombiniert hohe Schnittgeschwindigkeit, extra lange Bauform und präzisen CNC-Schliff zu einer Lösung für tiefe Metallbohrungen; die geschliffene Geometrie sorgt für saubere Bohrbilder und die Tieflochspirale nach DIN 1869 ermöglicht sichere Spanabfuhr unter erschwerten Bedingungen, bei Bedarf technische Beratung direkt über Metav anfordern. Spiralbohrer von MetavCUT, HSS‑G, 3,5 mm Spiralbohrer von MetavCUT für Metallbohrungen, extra lange Ausführung für tiefe und schwer zugängliche Löcher MetavCUT HSS‑G Ausführung für Stahl und Guss Extra lange Bauform, Gesamtlänge 265 mm Geschliffene Schaftausführung für hohe Rundlaufgenauigkeit Tieflochspirale nach DIN 1869 für bessere Spanabfuhr Spitzenwinkel 135° optimiert für härtere Werkstoffe Mehr Leistung bei anspruchsvollen Metallbohrungen Die HSS-G-Legierung bietet deutlich reduzierte Anpresskraft und ermöglicht laut Hersteller ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten. Für Anwender bedeutet das messbar kürzere Taktzeiten und weniger Ermüdung beim Bohren in legiertem und unlegiertem Stahl sowie in Gusswerkstoffen. Die Kombination aus geschliffener Geometrie und Tieflochspirale liefert saubere, präzise Bohrbilder und erleichtert das Nachbearbeiten. Präzision und Handhabung durch geschliffene Verarbeitung Die voll geschliffene Schaft- und Spiralgeometrie resultiert in scharfen Schneiden und hoher Rundlaufgenauigkeit, was besonders bei Passungsbohrungen relevant ist. Diese Qualität bietet Vorteile in der Serienfertigung und bei anspruchsvollen Einzelteilen. Wegen der höheren Sprödigkeit geschliffener Werkzeuge empfiehlt sich der Einsatz mit geeigneter Kühlung und, wo möglich, eine Spannvorrichtung oder stationäre Aufnahme, um die Lebensdauer zu maximieren. Extra lange Bauform für tiefe Bohrungen Mit einer Gesamtlänge 265 mm und einer Spirallänge 180 mm ist die Ausführung speziell für tiefe Bohrungen ausgelegt, bei denen Standardlängen an ihre Grenzen stoßen. Die Tieflochspirale nach DIN 1869 verbessert die Spanabfuhr deutlich und reduziert die Gefahr von Verstopfungen in langen Bohrgängen. Für sichere Ergebnisse empfehlen sich moderate Vorschübe, ausreichende Kühlung und bei sehr langen Bohrtiefen schrittweises Aufbohren. Einsatzzwecke und Zielgruppe Die Ausführung richtet sich an Werkstätten, Metallbauer und anspruchsvolle Heimwerker, die präzise Bohrungen in Grauguss, legierten und unlegierten Stahl bis 1000 N/mm², Gusseisen sowie Nichteisenmetalle und Hartkunststoffe ausführen müssen. Die Kombination aus MetavCUT-Qualität und Standard Line Verarbeitung macht den Bohrer zur praktischen Wahl für Anwender, die auf Verlässlichkeit und lange Einsatzfähigkeit setzen. Empfehlung: Auf die extra lange MetavCUT HSS‑G Ausführung setzen und für tiefe Metallbohrungen direkt über Metav beziehen — telefonisch +49 2822 7131930 oder per eMail info@metav-werkzeuge.com; SKU 34035‑FDA verfügbar. Produktmerkmale Artikelnummer: 34035-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 3,5 mm Gesamtlänge: 265 mm Spirallänge: 180 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Norm: DIN 1869 Ausführung: extra lang Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Ist der Bohrer für Edelstahl und gehärtete Werkstücke geeignet? Der MetavCUT Spiralbohrer HSS‑G 3,5 mm (SKU 34035‑FDA) ist für gehärtete Werkstoffe bis etwa 1000 N/mm² ausgelegt; durch den Spitzenwinkel 135° lässt sich die Anbohrung bei härteren Materialien verbessern, Kühlung und angepasste Schnittparameter sind jedoch erforderlich. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, die Ausführung erlaubt den Einsatz mit einer Handbohrmaschine, allerdings empfiehlt das Standard Line Werkzeug bei der extra langen Bauform eine stabile Führung oder Spannvorrichtung, um Ablenkungen und Bruchrisiken zu minimieren. Was bedeutet geschliffen im Vergleich zu gewalzt? Bei geschliffenen Spiralbohrern wie dem MetavCUT Modell erfolgt die Formgebung der Spannuten durch CNC‑Schliff; das Ergebnis sind scharfe Kanten und hohe Rundlaufgenauigkeit, allerdings mit höherer Sprödigkeit im Vergleich zu gewalzten Bohrern. Wie tief lassen sich Löcher mit dieser Ausführung bohren? Die Gesamtlänge 265 mm und die Spirallänge 180 mm sind für tiefe Bohrungen ausgelegt; für besonders tiefe oder kritische Anwendungen empfiehlt sich schrittweises Aufbohren und kontinuierliche Kühlung, um Spanbildung und Erwärmung zu vermeiden. In welcher Verpackungsgröße wird der Bohrer geliefert? Der MetavCUT Spiralbohrer HSS‑G 3,5 mm wird in der Verpackungseinheit 10 geliefert (SKU 34035‑FDA), geeignet zur Versorgung von Werkstattarbeitsplätzen und für kleinere Serien.
3.5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill Type N — extra short, Ø 3.5 mm, 135°, bright finished, HSS‑G, DIN 1897 The Twist Drill Type N is an extra short HSS‑G drill bit designed for precision metalworking with hand Drilling Machines in confined spaces. Extra short HSS‑G design for high stability 135° point angle for hard materials Cylindrical shank for universal chuck fit Ideal for hand and angle Drills in tight spaces Conforms to DIN 1897 for consistent quality Faster, more controlled drilling for demanding metalwork The extra short geometry reduces flex and breakage risk when working with metal, delivering a more stable cutting action compared with standard lengths. The ground HSS‑G cutting edges enable up to a 40% faster drilling speed and require about 50% less axial force, which translates into reduced operator fatigue and more reliable hole quality. This makes the bit particularly suitable where precision and repeatability are required. Robust tip and geometry for hard materials A 135° point angle combined with the Type N normal spiral provides better centring and reduced walking in harder steels and stainless alloys. The blunter tip shortens the initial penetration time and distributes cutting loads, so drilling into tougher materials like tempered or alloyed steels becomes more efficient. This geometry helps to extend tool life while maintaining consistent hole geometry. Universal fit and practical handling in confined spaces The drill features a cylindrical shank that fits standard three‑jaw chucks, offering broad compatibility with typical hand and angle Drilling Machines. With a total length of 52 mm and a spiral length of 20 mm, the compact form factor is ideal for shallow holes, sheet metal, profiles and situations where access is limited. The bright finished surface aids chip evacuation and makes bit handling straightforward on the bench. Application focus and recommended uses Manufactured to DIN 1897 from HSS‑G, this Twist Drill is designed for drilling Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The extra short design is particularly advantageous when working with thin‑walled components or when the setup cannot accommodate longer tools. Users seeking a robust, easy‑to‑control solution for metal drilling will find reliable performance with this geometry and material combination. We recommend the MetavCUT Type N extra short Twist Drill for precision metalworking; for product advice or technical data contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 56035‑FDA Diameter: 3.5 mm Point angle: 135° Type: Type N Material: HSS‑G Execution: extra short Colour: bright finished Shank execution: cylindrical Spiral length: 20 mm Total length: 52 mm Norm: DIN 1897 Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for drilling in high‑strength materials and larger diameters; its extra short design is well suited to metalworking tasks where stability and reduced breakage are important. Can the MetavCUT Twist Drill Type N be used with a hand Drilling Machine? Yes, the MetavCUT Twist Drill Type N with a cylindrical shank is intended for use in common hand Drilling Machines and angle drills, offering universal chuck compatibility for workshop and on‑site applications. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their form is easy to re‑grind and they withstand considerable loads. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑cut at the tip of the Twist Drill, which lowers friction and therefore reduces the required feed forces while improving centring in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to re‑grind and have less self‑feeding action.
Reliable holemaking for every production environment
Metal drill bits, primarily classed as HSS drill bits, deliver process-secure, dimensionally accurate holes across a wide range of metallic materials. Designed for both hand-held drilling and CNC series production, these twist drills maintain cutting performance at elevated temperatures and provide the toughness required for industrial workshop and machining applications.
Why these drills matter in your workflow
The core function of metal drill bits is centred on efficient material removal with consistent hole geometry and repeatable centring. Their geometry and cutting-edge design reduce the need for rework, permit drilling without prior centre-punching on many surfaces, and ensure reliable chip evacuation. In practice, this means shorter cycle times on batch runs, safer setup for manual operations, and stable performance under the demands of production.
- Increased production uptime through predictable tool life and wear behaviour.
- Better first-pass quality thanks to optimised tip geometry and cross-point design.
- Versatile material capability: suitable for structural steels, cast irons and non-ferrous metals.
- Compatibility with hand drills, pillar drills and CNC machines for workshop-to-production scalability.
Benefits you can measure
- Reduced rework rates and improved hole tolerances.
- Longer intervals between tool changes when using HSS-Co 5 or HSS-Co 8 variants.
- Improved centring and reduced walking on smooth surfaces thanks to cross-point geometry.
- Flexibility across material classes from aluminium to hardened steels when selecting the appropriate grade.
Metav as your precision partner
Metav combines decades of industry expertise with a comprehensive range that democratises precision for workshops and procurement teams. From the logistics hub in Emmerich, Metav acts as a quality filter for the European market, supporting over 48,000 customers and stocking more than 250,000 products. For buyers seeking a single, reliable source for high-performance drill solutions, Metav offers consistent availability and a professionally curated selection of metal drill bits and related tooling.
Technical data at a glance
- material: high-speed steel (HSS)
- variant: rolled HSS-R; ground HSS-G; high-alloy HSS-E
- cobalt options: HSS-Co 5; HSS-Co 8
- suitable for: alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron, aluminium, copper, brass
- geometry: typical tip angles 118° and 135°; cross-point (split point) for reduced walking
- application environments: hand drilling, pillar drill, CNC machining
Compact and reliably engineered, these metal drill bits—also referred to as HSS drill bits or twist drills—form the backbone of precision drilling operations in industrial and workshop settings.
FAQ
What distinguishes HSS drill bits from cobalt variants?
HSS drill bits provide high toughness and good performance at elevated temperatures; HSS-Co 5 and HSS-Co 8 variants add cobalt for increased hot hardness and extended tool life when machining tougher or stainless steels.
Which materials can metal drill bits handle reliably?
Metal drill bits are suitable for alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron and non-ferrous metals such as aluminium, copper and brass, depending on the selected grade and geometry.
When should I choose ground HSS-G over rolled HSS-R?
Choose ground HSS-G for higher concentricity, better chip evacuation and longer service life in production; rolled HSS-R is a cost-effective option for standard workshop tasks.
How does tip geometry affect drilling performance?
Tip angles around 118° are common for general-purpose drilling, while 135° tips and cross-point designs improve penetration and reduce walking on harder or polished surfaces.
Can these drill bits be used on CNC machines?
Yes—metal drill bits are suitable for hand-held, pillar and CNC operations; selection of grade and geometry should match the machine capability and workpiece material.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com