Precision metal drills for reliable, high-performance holemaking
Precision metal drills, commonly supplied as HSS twist drills, are engineered to produce clean, dimensionally accurate cylindrical holes in materials such as alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron and non-ferrous metals like aluminium, copper and brass, delivering consistent results in both manual and CNC operations. Their high-speed steel construction provides exceptional toughness, elasticity and fracture resistance, while variants such as roll-formed HSS-R and ground HSS-G offer cost-effective general performance or enhanced runout accuracy and chip evacuation respectively, and HSS-E or HSS-Co types ensure superior hot hardness when machining stainless or highly alloyed steels. Optimised point geometries (typically 118° for softer steels and 135° for harder grades) combined with a cross grind reduce feed force, enable accurate centring and promote efficient chip removal, improving process reliability and prolonging tool life.
3.5mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — HSS-G, 3.5 mm, 118° point, Hexagonal Shank, Fully Ground, Silver, DIN 338 (MetavCUT) The Twist Drill delivers precise metal drilling for portable and stationary Drilling Machines with a 3.5 mm diameter and a 118° point angle, designed for demanding machining tasks. Fully Ground geometry for precise holes Hexagonal Shank for secure bit holders Optimised for metal: HSS-G material Conforms to DIN 338 for short twist drills Compatible with Hand and portable Drilling Machines Durable HSS-G Material for Reliable Metalworking This twist drill uses HSS-G (high-speed steel, ground), a material chosen for strength and cutting performance when machining metals. The ground flute geometry produces very sharp cutting edges and high concentricity, which helps achieve clean, precise holes in alloyed and unalloyed steel, cast materials and non-ferrous metals. Because the cutting edges are produced by CNC grinding rather than rolling, the tool cuts more efficiently, reducing the required feed force and improving surface finish for subsequent operations. Efficient Cutting Geometry that Saves Effort Engineered with a 118° point angle and fully ground flutes, the bit centres easily and penetrates softer metals and mixed materials with controlled chip evacuation. The specific grind reduces friction and can enable up to faster drilling rates compared with roll-formed equivalents while requiring less axial force. For professionals working on production or maintenance tasks, this means more consistent hole quality and reduced operator strain during repetitive drilling. Fast, Secure Changeover with Hexagonal Shank A Hexagonal Shank design ensures form-fit torque transmission in quick-change holders and bit chucks commonly found on cordless drivers and workshop holders. This improves resistance to cam-out and simplifies tool changes without compromising compatibility with standard chucks. The fully ground finish and silver surface also aid visibility of wear, assisting timely tool inspection and maintenance. Optimised Dimensions and Machine Compatibility With a 3.5 mm diameter, Flute Length 39 mm and Total Length 90 mm, this twist drill is dimensioned for through-holes and moderate-depth bores in metalworking tasks. Conformity to DIN 338 classifies this as a short twist drill suitable for both stationary machine tools and portable use, depending on application and coolant provision. For best results, use appropriate speeds, feeds and cooling when drilling hard materials to extend tool life. Strong recommendation: For precise metal drilling tasks, choose the MetavCUT Twist Drill with Fully Ground geometry; METAV Werkzeuge offers expert consultation if you are unsure whether this tool suits your application — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill / Spiralbohrer Brand: MetavCUT SKU: 57035-FDA Diameter: 3.5 mm Point angle: 118° Material: HSS-G (ground high-speed steel) Finish / Version: fully ground (geschliffen) Colour: Silver Shank: Hexagonal Flute length: 39 mm Total length: 90 mm Application: Drills for metal / Bohrer für Metall Model series: Standard Line Norm: DIN 338 For use in: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills from MetavCUT are primarily applied to machining high-strength materials and larger drill diameters; their ground geometry is easy to resharpen and withstands higher loads, which makes them suitable for demanding metalworking tasks. Which 3 drill types exist? Common drill categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for use in metalworking. Is the MetavCUT Twist Drill suitable for cordless drills? The MetavCUT Twist Drill with a Hexagonal Shank is compatible with quick-change holders and many cordless drivers, offering secure torque transmission; however, for heavy-duty metalwork a stationary Drilling Machine or proper cooling is recommended for best tool life. Why choose a fully ground MetavCUT Twist Drill over rolled versions? A fully ground Twist Drill from MetavCUT provides sharper edges and higher runout accuracy, leading to cleaner holes and often faster drilling with less feed force, though careful handling and cooling are advised to avoid brittle fracture.
3.5mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Twist Drill – Left‑Cutting HSS‑G, 3.5 mm, 135° (DIN 338) | MetavCUT Profi Line The Twist Drill is a left‑cutting HSS‑G metal drill designed for use in Drilling Machines and Hand Drills for efficient extraction and machining of high‑strength materials. MetavCUT Profi Line Twist Drill Left‑cutting geometry for screw extraction HSS‑G material for high wear resistance 135° tip angle for hard metals like stainless steel Conforms to DIN 338 for short twist drills Engineered for faster, lower‑force metal drilling The Twist Drill from MetavCUT delivers a measurable Productivity advantage: the specially ground Left‑cutting geometry enables up to 40% faster drilling while requiring 50% less axial force compared with conventional HSS variants. This means less operator fatigue and more consistent hole quality when working with challenging materials. The 135° Tip Angle reduces initial skiving and shortens plunge time in hard substrates, making the tool particularly suited for demanding Metalworking tasks. Designed for extraction and tough applications Left‑cutting design is particularly effective when removing broken or seized screws because the counter‑rotation can engage and withdraw lodged fasteners. The MetavCUT Profi Line Twist Drill is recommended for a wide range of metals including Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Temperguss, Non‑Ferrous Metals and Hard Plastics. Use in a Drilling Machine with left‑hand rotation allows the special grind to perform as intended and increases the chance of extracting screw remnants during drilling. Material choice and what it means for longevity Constructed from HSS‑G (High‑Speed Steel, ground), this Twist Drill offers a balance between edge retention and re‑sharpenability for metalworking. Ground HSS enables a consistently sharp cutting geometry that supports higher feed rates and improves surface finish in the workpiece. For users who require repeatable performance and straightforward maintenance, the HSS‑G construction simplifies resharpening while maintaining cutting stability under continuous use. Compliance with standards and practical guidance The tool adheres to DIN 338, the specification for short Twist Drills with cylindrical shank produced from High‑Speed Steel; this ensures dimensional consistency and interchangeability in professional settings. The 3.5 mm Diameter and 135° Tip Angle are tailored for applications where centred start and reduced skidding are required on hard materials such as stainless steel. If unsure whether left‑cutting geometry fits your machine or task, METAV Werkzeuge offers competent technical advice and application support to confirm suitability before purchase. We strongly recommend the MetavCUT Profi Line Twist Drill for professional metalworking tasks and for operations requiring left‑cutting performance; for personalised technical guidance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Twist Drill Brand: MetavCUT SKU: 60035-FDA Diameter: 3.5 mm Tip angle: 135° Execution: Left‑cutting (linksschneidend) Material: HSS‑G Norm: DIN 338 For use in: Drilling Machine / Hand Drill Application: Drills for metal Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A MetavCUT Twist Drill (Twist Drill, metal drill) is mainly used for machining high‑strength materials and for larger bore diameters where robust cutting geometry is required. The left‑cutting variant is especially helpful when extracting broken or jammed screws, because the counter‑rotation often helps to turn out the screw remnant while drilling. The ground HSS design also supports faster drilling with lower feed forces. Which three drill types exist? Three common drill categories are: Metal Drills, Wood Drills, and Stone/Concrete Drills. The MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metalworking applications in both stationary and portable Drilling Machines. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill is suitable for use in a Hand Drill as long as the machine supports left‑hand rotation for the left‑cutting execution; when used properly, it delivers reliable hole quality and can assist in screw extraction tasks. If unsure about compatibility, METAV Werkzeuge provides expert consultation to match tool and machine.
3.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short HSS‑G, 3.5 mm, 135°, Bright Finished The Twist Drill short Type N is a precision metalworking drill for Drilling Machines and hand drilling tasks, offering a 3.5 mm diameter and a 135° point angle for reliable performance in harder materials. High‑speed Cutting with HSS‑G for faster drilling Short design per DIN 338 for greater rigidity Fully ground shank for precise clamping and runout 135° point angle optimised for stainless and hard steels Bright finished surface for easy chip evacuation Precision and Faster Cutting for Demanding Metals The HSS‑G material delivers significantly improved cutting performance: up to 40% faster drilling and about 50% less feed pressure compared with conventional HSS drills. This reduces operator effort and lowers tool wear when machining alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The Type N normal spiral geometry ensures effective chip removal and consistent hole quality in metallic workpieces, so users achieve reproducible results even in tougher applications. Stable Short Design for Accurate Holes Designed according to DIN 338 as a short Twist Drill, the reduced overhang makes the tool far less prone to deflection and chatter. The shorter working length results in enhanced stability and improved concentricity, particularly when used in chucking Drilling Machines. The fully ground shank guarantees secure clamping and minimal run‑out, translating into straighter holes, longer tool life and fewer reworks. Application Focused for Metalworking Professionals This Twist Drill is intended primarily for metal drilling tasks and performs best in stationary and portable drilling setups. It is especially suitable for workshops, maintenance departments and production lines where consistent hole accuracy in steel and similar materials is required. The geometry and finish mean the drill is also relatively easy to resharpen, allowing economical use across many cycles. Tip Geometry and Practical Advantages The 135° point angle reduces walking on flat or curved surfaces and shortens the time to break through hard materials. A blunter tip like this distributes cutting forces over a larger area, which helps when centring on stainless steel or tempered components. For users unfamiliar with drill point geometry: a larger tip angle generally improves tip life and reduces the tendency to dig in aggressively, making it a pragmatic choice for robust metalworking. Strong recommendation: Choose MetavCUT quality for demanding metal drilling and contact METAV Werkzeuge's expert team for personalised advice — they provide comprehensive technical consultation and after‑sales support. For assistance email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill short, Type N, 3.5 mm, 135° Marke: MetavCUT SKU: 27035-FDA Diameter: 3.5 mm Overall length: 70 mm Spiral length: 39 mm Point angle: 135° Typ: Type N Material: HSS‑G Shank finish: Fully ground Surface finish: Bright finished Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The Twist Drill by MetavCUT is primarily used for machining high‑strength materials and larger hole diameters; it is particularly suited to metalworking where durability and load tolerance are required. The short design and robust geometry make this Twist Drill easy to resharpen and able to withstand greater stresses during operation. Which three drill types exist? There are three main drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for cutting steels and similar materials. Is the MetavCUT Twist Drill suitable for stainless steel? Yes, the MetavCUT Twist Drill with a 135° point angle and HSS‑G composition is well suited for stainless steel and other harder alloys; the geometry reduces walking and improves tip life for cleaner, more consistent holes. Can the Twist Drill be resharpened? The MetavCUT Twist Drill can be resharpened; the HSS‑G material and the normal Type N spiral make it straightforward to regrind, extending service life and offering cost advantages for frequent users. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271
3.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombinieren Sie Stabilität und Präzision durch die kurze Ausführung und die geschliffene HSS-G-Geometrie für schnellere, saubere Metallbohrungen. Profitieren Sie von effizienter Zerspanung und geringer Anpresskraft bei anspruchsvollen Einsätzen; bei Bedarf steht Metav für Beratung und Lieferung bereit. Spiralbohrer von MetavCUT – HSS-G Kurzspiralbohrer (Typ N) Der Spiralbohrer von MetavCUT ist ein kurz ausgeführter, geschliffener HSS-G Metallbohrer für präzise Bohrungen in Stahl und Guss Kurz-Ausführung für höhere Stabilität Geschliffen für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen DIN 338 Klassifizierung, Profi Line Ausführung Robuste Schneidgeometrie für harte Materialien Die geschliffene HSS-G-Geometrie sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was besonders beim Bohren in legierten und unlegierten Stahl Vorteile bringt. Durch die kurze Ausführung reduziert sich die Auskraglänge, wodurch Vibrationen und Verbiegen minimiert werden; das Ergebnis sind präzise, gratarme Bohrlöcher und eine längere Standzeit der Schneide unter kontrollierten Kühlbedingungen. Effizienz und Bedienkomfort bei der Arbeit Dank der speziellen Geometrie kann bis zu 40 % schneller gebohrt werden und es ist bis zu 50 % weniger Anpresskraft erforderlich als bei herkömmlichen HSS-Bohrern. Das sorgt für geringere Belastung von Werkzeug und Maschine und ermöglicht ein gleichmäßigeres Vorschubverhalten bei Handgeführten Bohrmaschinen sowie stationären Säulenbohrmaschinen. Anwender profitieren von kürzeren Zykluszeiten und konsistenter Bohrqualität. Praktische Einsatzbereiche und Materialverträglichkeit Der Bohrer eignet sich gezielt für das Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Die Auslegung als Typ N mit Normalspirale macht ihn zur verlässlichen Wahl für allgemeine Metallbearbeitung in Werkstatt, Montage und Instandsetzung, insbesondere wenn Stabilität und Präzision im Vordergrund stehen. Verarbeitung, Normen und Anwendungsratschläge Die Fertigung gemäß DIN 338 und die geschliffene Schaftausführung bieten Vorteile bei Rundlaufgenauigkeit und Formtreue. Für beste Ergebnisse empfiehlt sich Kühlung bei Dauerbelastung und das Anpunkten bei größeren Durchmessern; bei stationärem Einsatz reduziert die kürzere Auskraglänge das Risiko von Werkzeugbruch. Profi Line-Qualität von MetavCUT gewährleistet eine konsistente Fertigungsqualität. Empfehlung: Mit dem MetavCUT Profi Line HSS-G Kurzspiralbohrer gezielt Präzision und Effizienz erreichen; bei offenen Fragen Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Produktmerkmale Artikelnummer: 48035-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Profi Line Norm: DIN 338 Daten Durchmesser: 3,5 mm Gesamtlänge: 70 mm Spirallänge: 39 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N Farbe: blank Einsatzgebiet: Bohrer für Metall Geeignet für: Handbohrmaschine FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer (Profi Line, SKU 48035-FDA) mit Spitzenwinkel 135° ist für härtere Werkstoffe wie Edelstahl besser geeignet als 118°-Spitzen; Kühlung und angepasste Schnittwerte werden empfohlen. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und die stabile Geometrie machen den Spiralbohrer von MetavCUT für den Einsatz mit Handbohrmaschinen geeignet, wobei ruhiger Anlauf und geeignete Kühlung die Standzeit verlängern. Wie unterscheidet sich die geschliffene Ausführung von gewalzten Bohrern? Geschliffene HSS-G-Bohrer bieten schärfere Kanten und höhere Rundlaufgenauigkeit, was besonders bei Metallbohrungen präzisere Ergebnisse liefert; sie sind jedoch empfindlicher gegen Kippbeanspruchung. Welche Vorteile bietet die kurze Ausführung konkret in der Praxis? Die kürzere Auskraglänge reduziert Vibrationen und Verformungen, führt zu weniger Werkzeugbruch bei anspruchsvollen Bohrungen und verbessert die Bohrgenauigkeit insbesondere in stationären Anwendungen. Wofür steht die Norm DIN 338 bei diesem Bohrer? DIN 338 klassifiziert kurze Spiralbohrer mit Zylinderschaft aus Schnellarbeitsstahl und definiert Fertigungsformen und Toleranzen, was für die Austauschbarkeit und Planbarkeit in der Werkstatt wichtig ist.
3.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill (Short) — HSS‑G, 3.5 mm, 118°, TIN‑coated, DIN 338 The Twist Drill short HSS‑G bit for Drilling Machine metalwork combines increased stability with extended tool life for precision workshop applications. Short design for high stability and precision TIN‑coated surface for reduced wear and longer life Fully ground shank for fast, low‑force drilling Conforms to DIN 338 for consistent dimensions and quality Greater Precision and Longer Tool Life for Metal Drilling Deriving real benefit from a compact geometry, the short Twist Drill reduces overhang and vibration to deliver more accurate holes in demanding tasks. The HSS‑G substrate provides high red hardness and wear resistance, while the TIN‑coated finish lowers friction and extends life under metalworking conditions. For users who require repeatable results, the combination of shortened flute length and the precise grind yields cleaner holes and fewer rejects. Ideal Choice When Stability Matters When the priority is rigidity rather than reach, the short format stands out: less cantilever means minimal deflection and better concentricity when drilling in steel or cast materials. This Twist Drill is particularly suited for workshop settings where a Drilling Machine or handheld drill is used with appropriate clamping. Use of coolant further reduces heat build‑up and preserves the coating, enabling consistent performance on alloyed and unalloyed steel. Simple Terms: What HSS‑G, TIN and Fully Ground Mean The designation HSS‑G indicates a ground high‑speed steel bit — grinding creates very sharp cutting edges and high run‑out accuracy. A TIN‑coated (Titanium Nitrid) surface acts as a solid lubricant layer that lowers friction and wear. A fully ground shank and flute geometry reduce cutting forces by up to 50% compared with conventional HSS bits, which means faster penetration and less operator effort. The 118° tip angle offers a compromise between centring ability and cutting strength, suitable for many metal applications. Applications and Who Benefits Most This short Twist Drill is designed for professional metalworkers, toolrooms and advanced hobbyists who require reliable holes in materials such as Tempered Steel, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze and Hartkunststoff. Its robustness and reduced tendency to chatter make it a sound choice for tasks that demand repeatability rather than deep through‑holes. For larger diameters or deeper drilling, consider longer geometries or stepped approaches. Strong recommendation: Choose the MetavCUT short TIN‑coated HSS‑G Twist Drill for precise metal drilling — for technical advice and tailored recommendations METAV Werkzeuge provides expert consultation via email info@metav-werkzeuge.com, phone +49 2822 7131930 and WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 28035-FDA Diameter: 3.5 mm Overall Length: 70 mm Spiral Length: 39 mm Tip Angle: 118° Execution: Short Shank Execution: Fully ground Coating/Colour: TIN‑coated Material: HSS‑G Application: Drills for Metal For Machine Type: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill is primarily applied to machining high‑strength materials and larger hole diameters; its geometry is easy to resharpen and it withstands substantial loads while maintaining performance in metalworking tasks. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill category and optimized for metal applications.
3.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short, 3.5 mm, 135° point angle, TIN-coated, HSS‑G, DIN 338 The Twist Drill Type N short is a TIN‑coated HSS‑G metal drill designed for precise, stable drilling in hard materials with a 3.5 mm diameter and a 135° point angle. Short design for enhanced stability TIN-coated for extended tool life Fully ground shaft for high precision Optimised for hard metals such as steel Conforms to DIN 338 manufacturing standard Engineered for precision and longer tool life The short HSS‑G construction delivers high rigidity and precise hole quality even under tougher conditions. The TIN‑coating reduces friction and wear, which significantly extends the tool life when drilling metals. With a 3.5 mm diameter and a 135° point angle, the geometry is specifically suited to reduce walking on hard surfaces and to penetrate stainless and alloyed steels more effectively. This design helps achieve cleaner holes with less burr formation while maintaining long‑term performance. Best use cases in workshop and industry Choose this short Type N twist drill for demanding metalworking tasks on stationary drilling machines or robust hand drills where high stiffness and repeatable accuracy matter. The reduced overhang makes it ideal for short, deep plunge operations and for applications that require excellent concentricity. It is particularly recommended for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics where the combination of HSS‑G material and coating provides proven results. Faster drilling with lower effort and improved runout Thanks to the fully ground flute geometry, drilling can be up to 40% faster and require up to 50% less axial force compared with conventional untreated HSS tools in comparable conditions. The ground manufacture yields sharp cutting edges and excellent runout accuracy, which translates into superior surface finish and dimensional consistency. For workshop efficiency this means less rework and higher throughput on repetitive metal drilling tasks. Practical handling, cooling and resharpening guidance To maximise lifetime and safety, use appropriate coolant or cutting fluid; the TIN‑coating combined with cooling considerably reduces thermal load and wear. The 135° point angle shortens initial penetration time in harder materials, but the ground flute design can be more brittle than rolled variants—avoid excessive vibration and side loads. Re‑grinding is possible and practical: the tool geometry is straightforward to resharpen, restoring cutting edges and maintaining performance when required. Strong recommendation: For consistent professional results choose MetavCUT’s Twist Drill Type N short (HSS‑G, TIN‑coated) and contact METAV Werkzeuge for expert advice at info@metav-werkzeuge.com or by phone +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Data Designation: Twist Drill Marke: MetavCUT Diameter: 3.5 mm Point Angle: 135° Type: Type N Execution: short Coating: TIN‑coated Shaft: fully ground Material: HSS‑G Spiral Length: 39 mm Overall Length: 70 mm Application: Drills for metal For Use With: Drilling machine / hand drill compatible Standard: DIN 338 Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The Twist Drill from MetavCUT, Type N, is used primarily for machining high‑strength materials and larger drill diameters; its short design and high‑quality HSS‑G construction make it suitable for alloyed and unalloyed steel, temper castings, cast iron, sintered iron, copper, bronze and hard plastics. This form is easy to resharpen and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are: Metal drill (such as the MetavCUT Twist Drill), Wood drill, and Stone/Concrete drill. Why are twist drills resharpened? The Tip is reshaped to reduce the cross cutting edge at the point. Resharpening lowers friction forces so that less axial feed is required and improves centring of the drill in the workpiece, which enhances performance and hole quality. Can a Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal drills are easier to resharpen and have lower self‑feeding tendencies, yet they deliver less clean, well‑guided holes in timber.
3.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short HSS‑G, 3.5 mm, 135° tip, TiN‑coated (DIN 338) by MetavCUT The Twist Drill Type N short is a precision HSS‑G drill designed for accurate metalworking on drilling machines and hand drills, offering a 135° tip and TiN coating for reduced wear. Short design for increased stability and precision TiN coating reduces friction and extends tool life HSS‑G ground geometry enables faster cutting 135° tip angle for improved centring in hard metals Fully ground shank for high concentricity and clean holes Stable, precise drilling even in demanding metals The short geometry of this HSS‑G drill reduces the unsupported length outside the chuck, which noticeably increases stability and lowers the risk of bending or vibration when working on tough materials. For a 3.5 mm diameter tool the reduced overhang results in more consistent hole position and less runout, so users achieve precise results with lower scrap rates. This makes the short design especially suitable for applications where tight tolerances matter. Longer tool life thanks to TiN coating and ground geometry A TiN‑coated surface combined with HSS‑G (ground high‑speed steel) reduces friction at the cutting edge and helps dissipate heat, which extends service life during continuous metal drilling. The ground flute geometry produces sharper cutting edges and a more efficient chip removal path, allowing up to 40% faster penetration in many ferrous materials while requiring significantly less feed force compared with conventional HSS drills. Broad metal compatibility and machine use Designed as a Type N normal‑spiral drill to DIN 338, this short twist drill is intended primarily for metal: alloyed and unalloyed steel, cast and sintered iron, bronze, copper and hard plastics. Its 135° tip angle improves entry and centring in harder workpieces such as stainless steel and temper castings. The tool is suitable for use in both stationary drilling machines and suitable hand drilling setups, provided correct clamping and coolant are used. Practical advantages for workshop productivity The fully ground shank and precise CNC grinding process yield high concentricity, which reduces vibration and produces cleaner holes with better surface finish. Because the short variant minimises deflection, higher feed rates can be applied safely on appropriate machines. For everyday workshop tasks that demand repeatable quality and minimal rework, this tool offers a measurable improvement in process reliability. Recommendation: For demanding metal drilling tasks, choose the MetavCUT short TiN‑coated Twist Drill for reliable precision and extended tool life — and if you are unsure whether this tool meets your requirements or need additional technical data, METAV Werkzeuge offers expert advice by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271. Designation: Twist Drill (short, Type N) Brand: MetavCUT SKU: 41035-FDA Diameter: 3.5 mm Overall length: 70 mm Spiral length: 39 mm Tip angle: 135° Material: HSS‑G (ground high‑speed steel) Coating / Colour: TiN‑coated Shank: fully ground For machine: Drilling Machine / Hand Drill Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit the MetavCUT Type N short? The MetavCUT Twist Drill Type N short is primarily used for drilling high‑strength metals and larger diameters where a stable, precise cut is required; its short form and TiN coating make it suitable for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics while delivering long tool life under correct cooling. Which three drill types exist and how does the MetavCUT Twist Drill fit in? There are three common drill families: metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group (Type N normal spiral) and is optimised for metalworking applications.
3.5mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill — HSS‑G Metal Drill, 3.5 mm, 135° tip, DIN 338, Spezial Series (with multi‑bevel cutting edge) The Twist Drill is a precision metalworking drill bit designed for demanding drilling tasks in alloyed and unalloyed steels and other metals, offering fast, centered starts and compatibility with standard Drilling Machines. High drilling speed with reduced thrust 135° tip for harder materials and stainless steel HSS‑G construction for metalworking applications Multi‑bevel cutting edge for clean, burr‑free holes Conforms to DIN 338 short spiral drill standard High performance for fast, efficient metalworking The HSS‑G composition and the specially ground geometry deliver notably faster drilling in a wide range of metals. Thanks to the multi‑bevel cutting edge, the tool achieves up to 40% faster progress while requiring up to 50% less feed force compared with conventional HSS bits. This efficiency reduces operator effort and machine load when working in steel, cast materials, non‑ferrous metals and technical plastics. For workshop environments where throughput and repeatable results matter, this cutting tool is engineered to increase productivity. Cleaner starts and better hole quality for tough materials A 135° tip angle is optimised for harder workpiece materials and helps prevent wandering on entry, producing clean, burr‑reduced hole edges. The reduced cross‑cut at the point lowers friction and the need for high feed forces, which improves centring and surface finish. For users who require precise hole geometry in stainless or tempered steels, this geometry reduces rework and downstream finishing, giving consistently better end results. Built for professional machines and demanding applications Designed according to DIN 338 for short spiral drills with cylindrical shank, this tool is intended primarily for metalworking on rotating stationary or mobile Drilling Machines. The Spezial series execution targets workshops and mechanical engineering settings where repeatability and tool life are required. If uncertainty exists about machine compatibility or the optimal drill for a specific alloy, METAV Werkzeuge provides expert technical support and application advice to ensure the correct tool choice. Standards, durability and practical use explained The designation HSS‑G denotes a high‑speed steel grade suited to metal drilling; it balances wear resistance and grindability for professional use. The DIN 338 reference identifies this as a short spiral drill with cylindrical shank and clarifies manufacturing and dimensional expectations. The included shaft execution — with multi‑bevel cutting edge, without triangular shank — ensures compatibility with standard chucks and quick change holders while maintaining precise cutting action. For users less familiar with drill geometry, the 135° tip simply means better performance and less walking in harder materials. We recommend the MetavCUT Twist Drill for precision metalworking where speed and clean hole quality are decisive — for application advice or technical questions contact METAV Werkzeuge at info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 55035-FDA Diameter: 3.5 mm Tip angle: 135° Material: HSS‑G Model series: Spezial Shank execution: with multi‑bevel cutting edge, without triangular shank Spiral length: 39 mm Overall length: 70 mm Standard: DIN 338 Application: Drills for metal / suitable for Drilling Machine use Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily used for metalworking and is suitable for alloyed and unalloyed steels, cast materials, non‑ferrous metals and hard plastics; its geometry and HSS‑G construction make it effective for demanding drilling tasks in workshop and industrial settings. For what is a spiral drill (Twist Drill) typically applied? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; it is easy to regrind and withstands higher loads, which makes it especially useful for drilling steels and other demanding workpiece materials. Which three drill types are there? Common categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking performance.
3.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill (Spiralbohrer) – HSS‑G Twist Drill, 3.5 mm, 135°, long, bright finished, fully ground, DIN 340 by MetavCUT The Twist Drill is a long HSS‑G metal drilling tool designed for deep and hard‑material drilling with a 3.5 mm Diameter and a 135° Point Angle, suitable for use with a Drilling Machine. CNC‑ground HSS for faster, cleaner metal drilling Long DIN 340 design for deep or hard‑to‑reach holes 135° Point Angle optimised for harder materials Fully ground Shank for high concentricity and precision Bright finished surface for improved rust resistance Precision Grinding for Faster, Cleaner Holes High‑speed‑steel HSS‑G and CNC Grinding deliver clearly measurable benefits: the Ground Geometry produces very sharp Cutting Edges and excellent Roundness, which enables up to 40% faster drilling and requires significantly less Feed Force than conventional HSS drills. This means less heat buildup and fewer burrs when working in Alloyed and Unalloyed Steel, Cast Steel and Non‑Ferrous Metals. For users with limited technical background: HSS‑G stands for a Ground High‑Speed Steel variant offering superior Edge Sharpness and Hole Quality compared with rolled drills. Deep Drilling Capability with Reduced Friction The Long Execution in accordance with DIN 340 provides extended Overall Length and Spiral Length to reach deeper Bore Positions and recessed Holes. The 135° Point Angle reduces initial Cutting Forces and improves Centring in harder Workpieces such as Stainless Steel, while the Bright Finished surface helps reduce Friction at entry. Because Ground drills can be more brittle than rolled types, stationary use or steady Cooling is recommended when drilling deep or at high Speeds to avoid chipping. Designed for Professional Metalworking and Maintenance Tasks Target Groups include Workshops, Maintenance Teams and Precision Mechanics who require repeatable, high‑quality Holes in Metal. The Fully Ground Shank supports low Runout in hand‑held and bench Drilling Machines, delivering uniform Hole Diameter and longer Tool Life under correct operating conditions. For best results, use appropriate Cutting Fluid, moderate Speed and steady Feed. METAVCUT’s Standard Line aims to combine Reliability and economical Performance for everyday industrial demands. MetavCUT’s HSS‑G Twist Drill is recommended for demanding metal drilling tasks; for personalised technical advice or application support contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 53035-FDA Diameter: 3.5 mm Point Angle: 135° Execution: long (DIN 340 long execution for deeper holes) Overall Length: 112 mm Spiral Length: 73 mm Colour / Finish: Bright finished Shank Execution: Fully ground (geschliffen) Material: HSS‑G Application: Drills for Metal / Bohrer für Metall Model Series: Standard Line For Use With: Drilling Machine (Handbohrmaschine) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials is it suitable for? The Twist Drill by MetavCUT is primarily used for machining high‑strength materials and larger diameters; it is especially suitable for alloyed and unalloyed Steel, Cast Steel, Sintered Iron and Hard Plastics. Its Ground Geometry is easy to resharpen and withstands higher Loads while delivering precise Holes. Which three main drill types exist? The three main Drill Types are Metal Drills, Wood Drills and Stone/Concrete Drills; MetavCUT’s Twist Drill belongs to the Metal Drill category and is optimised for metalworking conditions.
3.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, 3.6 mm, 118°, black, DIN 338 A compact Twist Drill in Type N design for precise metal drilling with Hand and Drilling Machines. Short Type N HSS for stable metal drilling 3.6 mm Diameter for precise holemaking 118° Tip Angle for quick centring Conforms to DIN 338 for short twist drills Black finish for easy identification Precision and stability for metalworking results The short HSS construction provides higher rigidity and reduces deflection during machining, so users benefit from consistent hole geometry and lower breakage risk. With a 3.6 mm Diameter and a Total Length of 70 mm, the flute Length of 39 mm keeps the working length compact, improving run-out behaviour when used in Hand or Drilling Machines. For workshops that require repeatable, accurate holes in alloyed and unalloyed steel, this geometry supports reliable, repeatable performance. Designed for reliable centring and fast penetration A 118° Tip Angle balances centring and cutting speed: it enables easier initial penetration on slightly curved or coated surfaces while maintaining efficient chip removal. The Type N normal spiral profile is optimised for metalworking, which means that this short Twist Drill is particularly suited to jobs where guidance and straightness matter most. For less experienced users, the combination of tip geometry and short overhang reduces the need for complex fixturing. Durable material, easy to re-sharpen and maintain Manufactured from High Speed Steel (HSS), this short Twist Drill delivers elasticity under load and can be re-sharpened when wear occurs, extending useful life. The HSS composition lowers the risk of brittle fracture for Diameters under 6 mm, making it a pragmatic choice for general metal drilling. Conformity with DIN 338 ensures standardised dimensions and interchangeability with common chucks and holders used in many metalworking environments. Typical applications and the right users for the tool This Twist Drill is intended for Drilling for metal tasks such as steel, cast iron, non‑ferrous metals and certain plastics; it is a practical choice for professional Workshops, maintenance teams and skilled hobbyists who need robust, repeatable performance. The short execution supports operations on bench drills and portable drills where stability is a priority. For projects requiring deeper or specialised holes other geometries or lengths should be considered. Why choose this MetavCUT short twist drill Choosing this MetavCUT short Twist Drill Type N means opting for a tool that emphasises stability, serviceability, and standard compliance. The compact design reduces vibration and improves surface finish in typical metalworking contexts. If there is uncertainty whether this Twist Drill matches a specific machine or material, METAV Werkzeuge offers expert consultation to help select the correct geometry and material treatment for the task. Strong recommendation: Choose the MetavCUT short HSS Twist Drill Type N for precise metal holes — for technical advice or assistance contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 40036-FDA Type: Type N Material: HSS (High Speed Steel) Diameter: 3.6 mm Tip angle: 118° Execution: short Flute/Spiral length: 39 mm Total length: 70 mm Colour: black Suitable for: Drilling Machine / Hand Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drill diameters; its form is easy to re-sharpen and withstands significant loads, which makes it suitable for demanding metalworking tasks and ensures reliable performance in many workshop applications. Which three drill categories exist? Drill types are commonly divided into metal drills, wood drills, and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for steel, cast iron and non‑ferrous metals. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cut at the drills' point, which lowers friction and therefore requires less feed force; for the MetavCUT Twist Drill this sharpening also improves centring and helps achieve a cleaner hole entry with reduced walking. Can the MetavCUT Twist Drill be used for drilling wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance is inferior and hole finish is less clean compared with purpose‑made wood drills; however, metal drills are easier to re-sharpen and have less self‑feed tendency.
3.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill short HSS‑E, 3.6 mm, 135°, Type N, 5% cobalt-alloyed, fully ground, DIN 338 The Twist Drill short (Type N) is a HSS‑E metal drill designed for precise, stable drilling in hard materials using a Drilling Machine. Short design for high stability 135° point angle for hard metals 5% cobalt-alloyed HSS-E material Fully ground shank for precision Complies with DIN 338 standard Greater Precision through a Short, Rigid Design A shorter cutting length reduces overhang and bending, delivering higher stability and more accurate hole positioning. The short configuration of this Twist Drill is especially effective when tight tolerances are required, since the reduced length minimizes chatter and deflection. For operators aiming to improve repeatability on metal components, this design leads directly to fewer rejects and less rework. Heat-resistant Material and Sharp, Clean Cutting Built from HSS‑E with 5% cobalt-alloyed composition, this Twist Drill offers enhanced hot hardness and wear resistance during interrupted cuts or higher cutting speeds. The fully ground geometry creates very sharp cutting edges and excellent runout accuracy, producing cleaner holes in ferrous and non-ferrous metals. Users should be aware that ground variants can be less ductile than rolled types and benefit from appropriate coolant to extend tool life. Optimised for Metalworking and Hard Materials With a 135° point angle and classic Type N spiral, the tool penetrates tough materials more effectively and reduces walking on the surface. This geometry is tailored to workpieces such as alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain engineering plastics. The 3.6 mm diameter and corresponding flute length support applications where compact, precise holes are required on stationary or mobile drilling equipment. Who benefits and how to integrate it into the workflow This Twist Drill from MetavCUT is aimed at machinists, toolroom staff and maintenance professionals who need a reliable, precise metal drill for production and repair tasks. Use with steady clamping and recommended cooling to avoid premature wear. Compliance with DIN 338 ensures standardized dimensions and interchangeability for workshop setups that require consistent tool geometry. Choose MetavCUT's Twist Drill short Type N for demanding metal drilling tasks — for detailed technical advice or help selecting the right drill please contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel +49 2822 7131930 • WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 47036-FDA Type: Type N Diameter: 3.6 mm Point angle: 135° Overall length: 70 mm Spiral length: 39 mm Execution: short Shaft finish: fully ground Material: HSS-E Colour: 5% cobalt-alloyed For: Drilling Machine Application: Drills for metal Norm: DIN 338 Model series: Standard Line Bezeichnung (English): Twist Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill short Type N best used for? The MetavCUT Twist Drill short Type N is best used for precision drilling in metal, particularly alloyed and unalloyed steel, cast iron and non‑ferrous metals where a short, rigid drill reduces deflection and improves hole quality. Is coolant recommended when using the Twist Drill short from MetavCUT? Yes, using coolant is recommended with the MetavCUT Twist Drill short to lower cutting temperatures, extend tool life and achieve cleaner holes, especially when drilling harder materials at higher speeds. What are Twist Drills used for? They are primarily applied to the machining of high‑strength materials and larger bore diameters; the Twist Drill design is relatively easy to resharpen and withstands higher loads. Which 3 drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, significantly lowering friction and required feed forces while improving the drill’s centring in the workpiece. Can metal drills be used for wood drilling? Metal drills can be used in wood, but they typically provide poorer guidance and a less clean finish compared with wood drills; they are easier to resharpen and have less self‑feed tendency. For which drilling depths is the Twist Drill most used? A through-hole in solid material is commonly produced with a Twist Drill; this tool is most frequently used for diameters up to 20 mm and drilling depths up to 100 mm. What is better, HSS or HSSE? The common belief that HSSE is always superior to HSS is incorrect; selection should consider actual working conditions to determine whether the higher cost of HSSE is justified.
3.6mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Kompakter Karosseriebohrer mit HSS-G und 135° Spitzenwinkel für präzise Blech- und Stahlbohrungen; die doppelseitige Ausführung reduziert Ausfallzeiten, und die geschliffene Schaftgeometrie sorgt für exakten Rundlauf. Nutzen Sie die Kombination aus schneller Schneidleistung und robuster Bauweise für effiziente Werkstattprozesse. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder fragen Sie die Beratung bei Bedarf an. Karosseriebohrer von MetavCUT Der Karosseriebohrer ist ein doppelseitiger HSS-G Bohrer für präzise Metallbearbeitung in Werkstatt und Karosserie, geeignet für Handbohrmaschine und stationäre Einsätze. Karosseriebohrer »58036-FDA« von MetavCUT Geschliffenes HSS-G für saubere Metallbohrungen Doppelseitig: zwei Spitzen in einem Bohrer 3,6 mm Durchmesser, kurze Bauform für Blecharbeiten Für Handbohrmaschine und Werkstattmaschinen geeignet Schnelle, präzise Bohrungen in harten Werkstoffen Dank HSS-G (geschliffen) ergibt sich eine deutlich schärfere Schneidkante, die saubere Bohrbilder in legierten und unlegierten Stahl, Gussstahl sowie in Nichteisenmetallen ermöglicht. Der 135° Spitzenwinkel reduziert das Anbohren und verteilt die Schnittkräfte, sodass die Bohrung schneller entsteht und weniger Anpresskraft erforderlich ist. Diese Eigenschaft führt zu messbarer Effizienzsteigerung bei wiederkehrenden Bohraufgaben, ohne die Standzeit unnötig zu beeinträchtigen. Doppelseitige Konstruktion reduziert Werkzeugwechsel Die doppelseitige Ausführung funktioniert wie zwei Bohrer in einem: Wenn eine Spitze stumpf geworden ist, kann der Bohrer gewendet und die zweite Spitze verwendet werden. Diese Lösung ist besonders praktisch im Karosseriebau und bei Dünnblecharbeiten, weil sie Rüstzeiten reduziert und die Kosten pro Bohrung senkt. Durch die kurze, stabile Bauform eignet sich das Werkzeug besonders für Nietlöcher und präzise Blechverbindungen. Kompatibilität, Handhabung und Anwendungsbedingungen Die geschliffene Schaftgeometrie sorgt für Rundlaufgenauigkeit und sichere Kraftübertragung, sowohl bei Handgeführten Bohrmaschinen als auch bei stationären Säulenbohrern. Mit einer Spirallänge von 13 mm und einer Gesamtlänge von 55 mm eignet sich der Bohrer für flache bis mitteltiefe Bohrungen. Wegen der höheren Sprödigkeit von geschliffenen HSS-Werkzeugen empfiehlt sich der Einsatz von Kühlschmierstoff und moderater Drehzahl, um Bruchrisiken zu minimieren und die Standzeit zu optimieren. Für wen dieses Werkzeug entwickelt wurde Dieses Werkzeug richtet sich an Fachbetriebe im Karosseriebau, Fahrzeuginstandsetzung und allgemeine Werkstätten sowie an anspruchsvolle Heimwerker, die präzise Metallarbeiten ausführen. Durch die Kombination aus robustem Material und durchdachter Bauart profitieren Anwender von reduzierten Stillstandzeiten und konstanter Bohrqualität, besonders bei seriennahen Reparatur- und Montagearbeiten. Empfehlung: MetavCUT HSS-G Karosseriebohrer für präzise Blecharbeiten direkt bei Metav anfragen; technische Beratung und Bestellhilfe per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 verfügbar. Produktmerkmale Artikelnummer: 58036-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Standard Line Ausführung: doppelseitig Material: HSS-G Farbe: blank Daten Durchmesser: 3,6 mm Gesamtlänge: 55 mm Spirallänge: 13 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (G = geschliffen, für scharfe Kanten) Schaftmaterial/-ausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Ausführung: doppelseitig Einsatzgebiet: Karosserie und Dünnblech FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Karosseriebohrer aus HSS-G mit 135° Spitzenwinkel ist für viele legierte Stähle geeignet; bei hochlegierten oder besonders zähen Edelstählen empfiehlt sich eine spezielle Schneidstoffwahl oder reduzierte Schnittgeschwindigkeit. Welche Maschinen sind kompatibel mit diesem Bohrer? Der Karosseriebohrer wurde für Handbohrmaschine und stationäre Werkstattmaschinen konstruiert; bei Handgebrauch empfiehlt sich kontrollierte Drehzahl und Kühlschmierstoff zur Minimierung von Wärme- und Bruchschäden. Wie tief kann mit dem Bohrer sicher gebohrt werden? Mit einer Spirallänge von 13 mm und einer Gesamtlänge von 55 mm sind flache bis mitteltiefe Bohrungen vorgesehen; für starke Tiefen oder Vollmaterial sollte stufenweise vorgebohrt werden. Wie verhält sich die doppelseitige Ausführung in der Praxis? Die doppelseitige Bauform ermöglicht zwei Einsatzseiten pro Werkzeug, wodurch Rüstzeiten reduziert werden; der MetavCUT Karosseriebohrer ist dadurch wirtschaftlich bei wiederkehrenden Blecharbeiten. Gibt es Besonderheiten bei der Anwendung von HSS-G? Geschliffene HSS-G Bohrer liefern sehr scharfe Kanten und präzise Bohrbilder, können aber spröder sein; daher empfiehlt MetavCUT den Einsatz mit Kühlung und kontrollierter Vorschubrate, speziell bei empfindlichen Einsätzen.
3.6mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Die Kombination aus Extra Kurzer Bauform, HSS-G-Schneide und Zylinderschaft sorgt für stabile, schnelle und vielseitige Metallbohrungen; profitieren Sie von geringerer Bruchneigung und erhöhter Bohrgeschwindigkeit und bestellen Sie den Spiralbohrer direkt über Metav oder kontaktieren Sie unsere Beratung bei Fragen. Spiralbohrer 3,6 mm von MetavCUT (Typ N) Spiralbohrer 3,6 mm für präzise Metallbohrungen in dünnen Blechen und Profilen, extra kurz und robust für Hand- und Winkelbohrmaschinen. Extra kurze Bauform für mehr Stabilität HSS-G: schnelleres Bohren in Stahl und Guss Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft, passend für Dreibackenfutter DIN 1897 Standard, Typ N Standardspirale Mehr Stabilität bei beengten Platzverhältnissen und dünnen Werkstücken Die Extra Kurze Ausführung reduziert die Hebelwirkung und minimiert die Bruchneigung, was insbesondere beim Bohren in dünnen Blechen oder engen Bohrpositionen entscheidend ist. Durch die kürzere Spirallänge verbessert sich die Rundlaufgenauigkeit, sodass weniger Nacharbeit erforderlich wird. Anwender profitieren von einer bis zu 40 % schnelleren Bohrleistung und einem um 50 % reduzierten Anpressdruck gegenüber herkömmlichen HSS-Varianten, was die Bedienung mit Handbohrmaschinen deutlich erleichtert. Materialqualität und Schneidwinkel für harte Metalle Der Einsatz von HSS-G sorgt für hohe Verschleißfestigkeit und thermische Belastbarkeit beim Bohren in legierten und unlegierten Stählen, Guss und Hartkunststoffen. Der Spitzenwinkel 135° reduziert das Ausbrechen beim Anbohren harter Werkstoffe und verkürzt die Anbohrzeit, weil die Schneide flacher auftrifft. Als Typ N mit Normalspirale eignet sich der Bohrer besonders für metallische Werkstoffe, wobei die Schneidengeometrie ein ausgewogenes Vorschubverhalten und zuverlässige Spanabfuhr gewährleistet. Kompatibilität mit Werkstatt- und Handmaschinen für den Alltag Die Zylinderschaft macht den Bohrer universell einsetzbar in gängigen Dreibackenfuttern von Handbohrmaschinen und Winkelschleifern mit Bohrfutter. Für den Durchmesser im Standard-Bereich (2,0 mm–13,0 mm) ist dieses Werkzeug ideal geeignet für Werkstattarbeiten, Montage und DIY‑Projekte; bei höherer Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer. Die extra kurze Ausführung ist speziell dann von Vorteil, wenn wenig Platz für Ausklinkungen oder Innenbearbeitung vorhanden ist. Praktische Anwendungstipps für saubere Bohrresultate Vor dem Bohren sollte die Bohrstelle entgratet und, falls möglich, mit Schneidöl leicht geschmiert werden, um Standzeit und Oberflächenqualität zu verbessern. Für saubere Passungen gilt: Anbohren über ein Zentrierloch erhöht die Präzision; bei tiefen Löchern ist Mehrstufiges Aufbohren ratsam, um die Querschneide zu entlasten. Beachten Sie die maximale effektive Bohrtiefe im Verhältnis zum Durchmesser; bei diesem Durchmesser reichen gewöhnlich direkte Bohrungen aus, solange die Maschine stabil gespannt ist. Nutzen Sie die hohe Stabilität und Schnittgeschwindigkeit des MetavCUT Spiralbohrers (SKU 56036-FDA) für exaktere Metallbohrungen und bestellen Sie direkt bei Metav – bei technischen Fragen: info@metav-werkzeuge.com Produktmerkmale Artikelnummer: 56036-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Typ: Typ N Norm: DIN 1897 Material: HSS-G Farbe: blank Schaftausführung: Zylinder Gesamtlänge: 52 mm Spirallänge: 20 mm Spitzenwinkel: 135° Ausführung: extra kurz Anwendung: Bohrer für Metall Verpackungseinheit: 10 Daten Durchmesser: 3,6 mm Gesamtlänge: 52 mm Spirallänge: 20 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten HSS-G: Hochleistungs-Schnellstahl, verschleißfest DIN 1897: Standard für Spiralbohrer, Maß- und Formtreue Zylinder: Rundschaft, passend für Dreibackenfutter Typ N: Normalspirale, geeignet für Metall und Stahl Extra kurz: Kürzere Gesamtlänge und Arbeitslänge für höhere Stabilität Anwendung: geeignet für Handbohrmaschine und Winkelbohrmaschinen FAQ Wie geeignet ist der Bohrer für Edelstahl und gehärtete Stähle? Der MetavCUT Spiralbohrer (Typ N, SKU 56036-FDA) mit Spitzenwinkel 135° ist für härtere Werkstoffe deutlich besser geeignet als spitzere Bohrer; bei sehr gehärteten Stählen empfiehlt sich jedoch spezialisierter Bohrerwerkstoff. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die Zylinderschaft macht den Spiralbohrer kompatibel mit gängigen Dreibackenfuttern von Handbohrmaschinen; bei hohem Drehmoment ist auf sicheren Sitz im Bohrfutter zu achten. Für welche Werkstoffe ist dieser Bohrer am besten geeignet? Der HSS-G Spiralbohrer ist optimiert für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Wie verhindert man Bruch bei der Nutzung des extra kurzen Bohrers? Kurze Bohrerlängen reduzieren die Bruchgefahr; zusätzlich helfen korrekt gewählter Vorschub, moderate Drehzahlen und Einsatz von Schneidöl, die Standzeit zu erhöhen. Worin besteht der Vorteil der extra kurzen Ausführung gegenüber Standardlängen? Die Extra Kurze Bauform erhöht die Verdrehungsfestigkeit, verringert das Risiko des Verkippens und ermöglicht präzise Bohrungen in engen Bauteilen.
3.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill (Spiralbohrer) — Type N, 3.6 mm, 135°, Short, Bright Finished, HSS‑G, DIN 338 The MetavCUT Twist Drill (Spiralbohrer) is a short, fully ground Type N drill bit designed for precision metalworking and stationary or portable drilling machines. Short, short design for higher stability Fully ground HSS‑G for clean, precise holes 135° tip optimized for hard materials Conforms to DIN 338 for short twist drills Bright finished shank for secure clamping Durable HSS‑G construction for metalworking efficiency The HSS‑G composition of this short twist drill combines high hardness with a ground geometry that produces clean, accurate holes in a range of metals. Because the flutes and cutting edges are produced by CNC grinding rather than rolling, the result is a sharp cutting edge and excellent runout accuracy, which reduces the need for rework. For operations in alloyed and unalloyed steel, cast steels and non‑ferrous metals, this material and finish deliver reliable performance and predictable tool life. Short length for greater rigidity and precision A reduced overall length and short flute length lower the unsupported overhang, increasing rigidity and reducing vibration during drilling. This design characteristic leads to improved hole quality and less tool deflection when machining harder materials. In practice, shorter drill geometry is particularly advantageous when using the drill in demanding machining tasks or in setups where concentricity and surface finish are critical. 135° tip and Type N spiral for hard materials The 135° tip angle of this twist drill reduces the initial tendency to wander and distributes cutting forces over a larger area, which is beneficial when penetrating tougher materials such as stainless steel. As a Type N (normal spiral) geometry, the flute pitch and helix are optimised for metalworking, offering a balance between chip evacuation and cutting stability. For users unfamiliar with tip geometry: a larger tip angle shortens the entry time and improves centring on hard workpieces. Fully ground shaft and bright finish for secure clamping The fully ground shank ensures consistent diameter and concentricity, making the tool easier to clamp securely in standard chucks and toolholders. The bright finished surface facilitates smooth insertion and removal while minimising corrosion during storage. Together these features enhance setup reliability and reduce downtime caused by tool slippage or misalignment. Applications and recommended use This short twist drill is intended primarily for metal drilling on both stationary and portable drilling machines. Typical applications include holes in alloyed and unalloyed steels, cast materials, sintered and tempered irons, non‑ferrous metals and hard plastics. Due to its ground geometry and material properties, the drill is best used with adequate coolant and in setups where rigidity can be maintained to avoid premature breakage. For technical advice or to verify if this MetavCUT Twist Drill matches specific machining conditions, METAV Werkzeuge offers expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 45036-FDA Type: Type N Diameter: 3.6 mm Tip angle: 135° Execution: Short Flute length: 39 mm Overall length: 70 mm Shank execution: Fully ground Material: HSS‑G Finish/Colour: Bright finished For drill machine: Drilling Machine (Hand Drill) Application: Drills for metal Standard/Norm: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the MetavCUT Twist Drill (Spiralbohrer) and where is it best applied? The MetavCUT Twist Drill (Spiralbohrer), a Type N short HSS‑G drill, is mainly applied for machining high‑strength materials and larger diameters in metalworking; its ground geometry makes it especially suitable for precise holes in alloyed and unalloyed steel, cast steel and other hard materials. Which three drill types exist and how does the MetavCUT Twist Drill relate to them? There are three main drill categories: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking rather than wood or stone applications.
3.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) – 3.6 mm, 135°, HSS‑G, short, bright finished The Twist Drill (Type N) is a short, fully ground HSS‑G metal drill designed for drilling machines and precision work in hard materials Short design for higher stability and precision 3.6 mm Diameter for precise metal drilling 135° Tip angle for hard materials like stainless steel HSS‑G Fully ground for sharpness and accuracy Suitable for Drilling Machines and demanding metalwork Precision and performance for demanding metalwork Der kurze Twist Drill überzeugt durch seine kompakte Bauweise, die eine deutlich höhere Stability und geringere Neigung zum Verbiegen ermöglicht. Die geschliffene HSS‑G-Geometrie sorgt für scharfe Schneidenflanken und eine gleichmässige Schnittführung, was in der Praxis zu saubereren Bohrlöchern führt. Dank der kürzeren Spiral‑Auskragung ist die Bohrung stabiler, Materialausbrüche werden minimiert und die Effizienz beim Bohren in legierten und unlegierten Stählen erhöht. Optimised for hard materials and machine use Die Kombination aus 135° Tip angle und der Norm DIN 338 macht diesen Bohrer zur idealen Wahl für härtere Werkstoffe wie Edelstahl, Gussstahl und Hartkunststoffe. Als Typ N (Normalspirale) ist der Bohrer speziell für Metallbohrungen konzipiert und arbeitet zuverlässig in stationären oder mobilen Bohrmaschinen. Anwender profitieren von einer schnelleren Vorschubaufnahme und einer besseren Zentrierung beim Anbohren, insbesondere bei präzisen Metallbearbeitungen. Target groups and safe handling tips Fertigungstechniker, Maschinenbediener und anspruchsvolle Handwerker profitieren gleichermaßen von der Profi Line Ausführung. Für ein langlebiges Ergebnis empfiehlt sich beim Einsatz Kühlung und eine geeignete Schnittgeschwindigkeit; geschliffene HSS‑Bohrer können bei falscher Handhabung spröde reagieren, daher gehört eine ruhige Maschinenführung zur sicheren Anwendung. Bei Unsicherheiten zu Einsatzparametern oder kompatiblen Maschinen steht METAV Werkzeuge mit kompetenter Beratung zur Seite. Strong recommendation: Choose the MetavCUT Profi Line short Twist Drill for precise metal drilling — for expert advice or technical queries contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill Brand: MetavCUT SKU: 48036-FDA Type: Type N Diameter: 3.6 mm Tip Angle: 135° Material: HSS‑G Overall Length: 70 mm Spiral Length: 39 mm Shank Execution: Fully ground Execution: Short Finish Colour: Bright finished Intended Use: Drills for metal / Drilling Machine Series: Profi Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill mainly used for and what makes the MetavCUT Type N suitable? A Twist Drill from MetavCUT, Type N, is primarily applied to the machining of high‑strength materials and larger drill diameters; the short, fully ground HSS‑G design is easy to resharpen and withstands higher loads, making it particularly suited for reliable metalworking tasks. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill category and optimised for steel and similar materials.
3.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Spiralbohrer) — Short HSS-G Type N, 3.75 mm, 135°, Bright Finished, Fully Ground, DIN 338 — MetavCUT A Twist Drill (Spiralbohrer) Type N designed for Drilling Machine use, offering a short, rigid HSS-G construction for precise metalworking in hard materials. Short design for improved rigidity and accuracy HSS-G ground geometry for clean, precise holes 135° point angle suited to hard metals and stainless steel Fully ground shank for excellent runout accuracy Conforms to DIN 338 for short twist drills Maximum Precision from Ground HSS for Demanding Metalworking The short HSS-G construction provides a significant increase in Stability compared with longer drills, reducing deflection and enabling more accurate hole placement. This ground variant produces very sharp cutting edges and high Roundness of the bore, which is particularly advantageous when machining alloys and tempered steels. The Type N spiral is the classic metalworking geometry, optimised for consistent chip removal and reliable centring in stationary drilling setups. Faster, Lower-Force Drilling with Reduced Wear Engineered to cut with less effort, the ground HSS geometry can deliver up to 40% faster drilling and requires markedly lower feed forces versus conventional HSS products. The 135° Point Angle decreases initial breakthrough stress on the workpiece and is therefore recommended for harder materials such as stainless steel and cast components. This combination reduces tool wear and supports longer life when used with appropriate cooling and feed rates. Ideal Applications and Target Users Designed for professional workshops and industrial users, this short Twist Drill excels in precision metal fabrication, maintenance and toolroom tasks. Suitable materials include alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals and hard plastics. The short overhang makes the tool particularly well suited to tasks requiring dimensional accuracy and minimal runout on drilling machines and dedicated fixtures. Handling, Regrinding and Machine Compatibility A ground HSS drill should be used primarily in stationary or rigidly supported drilling machines with appropriate coolant to avoid brittle failure. The fully ground shank ensures consistent chucking stability; regrinding is straightforward for experienced users, preserving cutting geometry. Conformity to DIN 338 ensures predictable dimensions and compatibility with standard toolholders and collets. For precision metalworking choose the MetavCUT Twist Drill — contact METAV Werkzeuge for tailored technical advice and support at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Detailed Specifications for Machine Compatibility Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 450375-FDA Type: Type N Diameter: 3.75 mm Overall Length: 70 mm Spiral Length: 39 mm Point Angle: 135° Execution: short Shank Finish: fully ground Material: HSS-G Standard: DIN 338 Colour: bright finished For Machine: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill (Spiralbohrer) Type N? The MetavCUT Twist Drill (Spiralbohrer) Type N is primarily used for machining high-strength materials and larger drill diameters; its short, ground design makes it ideal for precise work in alloyed and unalloyed steels, cast components and hard plastics, delivering clean holes and high runout accuracy. How should the MetavCUT Twist Drill be maintained for longest life? Regular use with suitable coolant and correct feed rates preserves the sharp HSS-G geometry of the MetavCUT Twist Drill; regrinding should be performed by trained personnel to maintain the original point angle and flute geometry for consistent drilling performance. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high-strength materials and for larger drill diameters; its geometry is easy to regrind and it withstands significant loads while providing reliable cutting behaviour. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills.
3.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 3.7 mm, 118°, black, DIN 338 The Twist Drill Type N is a short HSS metalworking drill designed for precision drilling in steel and non-ferrous metals using a compatible Drilling Machine. Short HSS design for stable drilling Conforms to DIN 338 for short twist drills 118° tip for improved centring on curved surfaces Type N normal spiral optimized for metalworking Flute length 39 mm and overall length 70 mm for rigidity Exceptional material performance for demanding metalwork This short HSS Twist Drill with a diameter of 3.7 mm delivers high wear resistance and toughness for standard metal drilling tasks. Made from High Speed Steel, the bit is manufactured to provide elasticity that reduces breakage risk when drilling holes below 6 mm. The HSS composition supports reliable cutting in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics while allowing easier resharpening compared with coated alternatives. The compact geometry reduces vibration and ensures consistent hole quality. Built for stability and machine compatibility Conforming to DIN 338, this short Twist Drill is specified for use with a cylindrical shank on rotating stationary or portable machines. The Type N normal spiral is the classic geometry for metal and steel applications and therefore well suited to a wide range of Drilling Machines. The 118° point angle eases initial penetration and improves centring on slightly curved or work-hardened surfaces; for harder materials, a different point geometry may be preferred. The combination of Flute Length 39 mm and Overall Length 70 mm minimises overhang and reduces the risk of deflection during operation. Who benefits and where to use it Workshops, maintenance technicians and professionals who require reliable standard metal drills will find this short Twist Drill particularly useful for precision tasks. Its compact length makes it ideal for confined setups and for maintaining concentricity in deep or blind-hole drilling up to moderate depths. For users uncertain about compatibility with specific machines or materials, METAV Werkzeuge offers expert guidance to match the drill to the task and tooling. Practical advantages: handling, resharpening and life cycle The short design increases stiffness and improves hole accuracy while simplifying handling in jigs and fixtures. The Type N spiral is straightforward to regrind, extending service life and lowering total tooling cost for frequent users. Because the point geometry reduces the cross-cut area at the tip, cutting forces and friction are decreased, which in turn reduces required feed forces and improves centring during start-up. For routine maintenance and professional use, this drill strikes a balance between performance and long-term economy. We recommend the MetavCUT Twist Drill Type N for reliable, precise metalworking; for personalised advice or additional technical data contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 40037-FDA Diameter: 3.7 mm Tip angle: 118° Execution: short Material: HSS (High Speed Steel) Standard: DIN 338 Type: Type N For Drilling Machine: Drilling Machine Flute Length: 39 mm Overall Length: 70 mm Colour: black Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is especially applied when machining alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The short HSS design makes it robust for standard metalworking tasks and reduces breakage risk on smaller diameters. Which three drill types exist and how does the Twist Drill fit in? Common drill categories are metal drills, wood drills, and masonry/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal-drill group, offering the classic normal spiral geometry optimised for steel and similar materials.
3.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, Diameter 3.7 mm, 135° Point Angle, Short Execution, 5% Cobalt-Alloyed, HSS‑E, DIN 338, Fully Ground Shaft (Standard Line) by MetavCUT The Twist Drill is a short Type N metal drill designed for precise drilling in hard materials with a 135° point angle and a 3.7 mm diameter, ideal for use in a Drilling Machine. Short design for greater stability and precision HSS‑E with 5% cobalt for higher heat resistance Fully ground shaft for excellent runout accuracy Conforms to DIN 338 for short twist drills Optimised for metal drilling and hard materials Precision and stability for demanding metalwork The short Twist Drill design reduces overhang and vibration, which directly improves drilling accuracy and tool life. Because the protruding length is smaller, the drill resists bending and chatter, making it especially suitable for precise holes in steel and other hard materials. This short execution is therefore recommended when high concentricity and repeatable results are required in metalworking tasks. Material technology that extends performance Manufactured from HSS‑E and alloyed with 5% cobalt, the drill offers increased hot hardness and wear resistance compared with conventional high-speed steels. The 135° point angle is selected to ease penetration into tough materials and to lower the tendency for the tip to wander. For users unfamiliar with these terms: HSS‑E is a high-speed steel with cobalt additive that maintains hardness at elevated temperatures, while a larger point angle reduces cutting stress on stainless and alloy steels. Ground geometry for cleaner holes and reliable guidance This MetavCUT twist drill is fully ground, meaning the flute geometry and cutting edges are produced by CNC grinding rather than roll forming. The result is sharper cutting lips, improved roundness of holes and a better surface finish in the workpiece. For workshop operators this translates into fewer rework steps and less time spent deburring. The Type N spiral (normal helix) provides a balanced chip evacuation for many metal applications. Conformity and recommended uses Being manufactured to DIN 338 as a short twist drill, this tool is optimised for drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The short length and robust material composition make it well suited for stationary and portable Drilling Machines when coolant is applied for deep cuts or harder alloys. For diameters under 6 mm the rolled HSS variant can reduce breakage risk in some settings, but the ground HSS‑E offers superior hole quality for precision work. Strong recommendation: Choose the MetavCUT Twist Drill for precise metal drilling tasks where stability and hole quality matter most — METAV Werkzeuge offers expert advice and technical support to ensure the right tool choice for your application. For assistance contact METAV Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930 / WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47037-FDA Diameter: 3.7 mm Point Angle: 135° Type: Type N Material: HSS‑E Execution: Short Colour/Alloy: 5% cobalt-alloyed Shaft Execution: Fully ground Spiral Length: 39 mm Overall Length: 70 mm Intended For: Drilling Machine Application: Drills for metal Model Series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT best used for? The MetavCUT Twist Drill is primarily used for metalworking: it is designed to drill high-strength materials and larger diameters where stability and precise guidance are required; its short design and material composition allow it to withstand higher stresses during drilling. Can the MetavCUT Twist Drill be used in a handheld drill? The Twist Drill is optimised for Drilling Machines and stationary setups for best results, but it can be used in handheld machines for lighter tasks; however, stable clamping and appropriate feed control are recommended to avoid breakage and to maintain hole quality. What are Twist Drills used for? Twist Drills are mainly applied when machining high-strength materials and larger drill diameters. Their shape allows relatively easy regrinding and they withstand higher loads, making them suitable for demanding metal drilling operations. Which three drill types exist? The three common drill types are: Metal Drill, Wood Drill, and Stone/Concrete Drill. Why are Twist Drills sharpened (pointed)? Pointing reduces the cross-cut at the tip of the Twist Drill, which significantly lowers friction and thus the feed forces required; at the same time the pointed tip centres the drill more accurately in the workpiece. Can you use a metal drill in wood? A metal drill can be used in wood, but guidance may be inferior and the hole finish less clean; metal drills are easier to re-sharpen and have less self-feed, so they behave differently compared with wood-specific bits. For which hole depths is the Twist Drill most commonly used? Twist Drills are the standard tool for through-holes; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm, making them the go-to choice for many machining tasks.
3.7mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — double-sided HSS-G, 3.7 mm, 135° The Body Drill (Karosseriebohrer) is a double-sided Twist Drill for hand Drilling Machines, designed for precise metalworking and sheet-metal applications with a 3.7 mm diameter and a 135° tip angle. Double-ended design for extended usability HSS-G ground geometry for clean metal holes Reduced feed force and faster drilling performance Bright finished surface for smooth chip evacuation High-efficiency cutting for hard materials The HSS-G ground construction of this Body Drill combines sharp cutting edges with high concentricity, enabling clean, precise holes in a variety of Metals. With a 135° tip angle the drill reduces walking and improves entry in harder materials such as stainless steel and alloyed steel. The fully ground flute geometry produces consistent chips and surface finish, which benefits users who require repeatable, high-quality results. Practical advantage of a double-sided design Thanks to the double-sided execution the tool works like two drills in one: when one tip becomes dull it can be reversed and the other end used, extending the service life in daily workshop use. This shorter, robust format is particularly suited for bodywork and thin-sheet drilling where stability and the option to flip the drill increase uptime. Operators will notice lower downtime and fewer tool changes during repetitive tasks. Optimised handling and recommended operating practice The fully ground shank and flute geometry deliver high roundness and dimensional accuracy, improving guidance in hand Drilling Machines. For best results when drilling tough or heat-sensitive materials, apply appropriate cooling and moderate cutting speeds to avoid embrittlement. Because ground HSS can be harder and more brittle than rolled versions, stationary use with coolant is recommended for sustained durability. Suited users and typical applications This Body Drill is targeted at Automotive Body Shops, Maintenance Technicians and metalworking professionals who need reliable, precise holes in thin to medium-thickness metals. Typical applications include sheet-metal assembly, rivet and fixture preparation and general metal fabrication. The tool is especially effective where clean hole quality and quick tool replacement by flipping the drill are priorities. For professional workshop results choose the MetavCUT Body Drill with HSS‑G ground geometry — and contact METAV Werkzeuge for expert advice and tailored technical support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Information Designation: Karosseriebohrer / Body Drill Brand: MetavCUT SKU: 58037-FDA Diameter: 3.7 mm Tip angle: 135° Execution: double-sided Colour: bright finished Material: HSS-G Shaft execution: fully ground Total length: 55 mm For drilling machine type: Drilling Machine (Handbohrmaschine) Model series: Standard Line Application: Drills for metal / Bohrer für Metall Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what are Twist Drills used? The Body Drill (Karosseriebohrer) from MetavCUT is a type of Twist Drill primarily applied to machining high-strength materials and larger drill diameters; its form allows for straightforward regrinding and it withstands higher loads, making it suitable for demanding metalworking tasks. Which 3 drill types exist? When choosing tools, consider the main categories: Metal drills (such as the MetavCUT Body Drill), Wood drills and Masonry/Concrete drills, each optimised for the specific material and drilling method.
3.7mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N · 3.7 mm · 135° Tip · Extra Short · Bright Finished · HSS‑G · DIN 1897 The Twist Drill is an extra‑short Type N drill for Drilling Machines, designed for stable, precise metalworking in confined spaces. Extra‑short design for superior stability 135° tip for harder materials and faster entry HSS‑G material for high wear resistance Cylindrical shank for universal chuck compatibility DIN 1897 standard ensures industrial reliability Faster, more stable drilling in limited spaces The Extra‑Short design reduces flex and the risk of breakage, producing more stable cutting when working in tight or thin components. Because the overall length and flute length are shortened, the cutting forces focus more directly at the tip; this means improved concentricity and less vibration during use. For metalworking tasks where access is limited, the compact geometry offers a practical advantage while maintaining tool life and reliability. Optimised geometry for harder materials Equipped with a 135° tip, this Type N drill is optimised for drilling harder metals such as stainless steel. A larger tip angle reduces the initial bite and shortens lead‑in time, lowering the required thrust and improving centring. For customers unfamiliar with tip geometry: the tip angle influences how aggressively the drill cuts and how well it self‑centres; 135° is commonly chosen for tougher, less ductile materials. High‑speed steel G grade for durable performance Manufactured from HSS‑G, the Twist Drill combines toughness with thermal resistance suitable for continuous metal drilling. Compared with standard HSS, the ground geometry enables up to 40% faster drilling with around 50% less feed force in many cases. This characteristic is particularly beneficial when working on alloys, cast steels, and non‑ferrous metals where consistent cutting performance and regrindability matter. Practical compatibility and application scope The cylindrical shank makes the tool universally compatible with standard three‑jaw chucks on Hand and Angle Drilling Machines. While the round shank is ideal for general clamping, operators should note that very high torque applications may require alternative shank types to avoid slippage. Intended primarily as a metalworking tool, the drill excels in thin materials such as sheets, profiles and plate where a short, stiff geometry is advantageous. Target users and workshop recommendation Designed for professionals and advanced hobbyists tackling precision metal fabrication, the drill suits those needing a compact, resilient cutting tool for confined assemblies and maintenance tasks. The Standard Line model offers dependable repeatability for production or repair work, and its classic Type N flute form provides familiar handling and easy regrinding for workshops that maintain their own tooling. Strong recommendation: Choose the MetavCUT Extra‑Short Twist Drill for demanding metal drilling tasks — for personalised advice or detailed technical data contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 56037-FDA Diameter: 3.7 mm Tip Angle: 135° Type: Type N Finish: Bright finished Execution: Extra Short Material: HSS‑G Standard: DIN 1897 Suitable for: Drilling Machine (Hand drilling machines and angle drills) Spiral Length: 20 mm Overall Length: 52 mm Shank: Cylindrical Model Series: Standard Line Application: Drills for metal Colour: Bright finished Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger diameters in metalworking. Its extra‑short form is especially useful for drilling thin sheets and profiles, and the HSS‑G grade and ground geometry make it suitable for alloyed and unalloyed steel, cast steel, cast iron and non‑ferrous metals. Which three drill types exist? The main categories of drill bits are metal drills, wood drills and masonry/concrete drills, each optimised for the respective material properties and cutting requirements.
3.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N, Ø 3.7 mm, 135° tip, Bright finished, HSS‑G, DIN 338 (MetavCUT) A short Twist Drill (Type N) for Drilling Machines that excels in metalworking and precision tasks. Short HSS‑G Twist Drill for hard metals 135° tip for improved entry in stainless steel Fully ground shank for high stability and precision Conforms to DIN 338 for short twist drills Faster metalworking with lower feed force The HSS‑G construction combines hardness and toughness, enabling up to 40% faster drilling and requiring around 50% less feed force compared with conventional HSS bits. This advantage reduces operator fatigue during extended runs and lowers the mechanical load on handheld Drilling Machines. The short design minimises overhang, improving stability and reducing deflection, which is particularly valuable when working with legated and unlegated Steel or Cast Iron. Stable, precise holes in demanding materials Equipped with a 135° point angle, this short Type N bit is optimised for harder materials such as Stainless Steel, where a flatter point shortens the initial breakthrough and improves concentricity. The fully ground shank and flute geometry ensure reliable chip evacuation and repeatable centring, so fewer re‑drills are necessary and part quality is maintained. Explanation: a larger point angle distributes cutting forces and delays work hardening on the surface. Built to DIN 338 for workshop reliability Manufactured to DIN 338, the geometry and dimensions follow the standard for short Twist Drills with cylindrical shanks, allowing predictable performance across batches. This standardisation simplifies tool selection for workshops and ensures compatibility with common tool holders. The Basic Line model focuses on practical robustness rather than cosmetic frills, delivering straightforward performance for professional metalworking environments. Where this drill bit adds the most value The product is designed for precision tasks on metal: steel, cast materials, sintered iron and certain hard plastics. Its shorter length improves handling in tight fixtures and reduces chatter in portable Drilling Machines. For users seeking a reliable, easy‑to‑regrind solution for medium to heavy duty holemaking, this Twist Drill offers a practical balance between cutting speed and tool life, making it suitable for production and maintenance applications. Strong recommendation: Choose the MetavCUT HSS‑G short Twist Drill for demanding metal drilling operations; for tailored technical advice and help selecting the right configuration contact METAV Werkzeuge — Email: info@metav-werkzeuge.com │ Phone: +49 2822 7131930 │ WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill (Short) Brand: MetavCUT SKU: 27037-FDA Diameter: 3.7 mm Total length: 70 mm Spiral length: 39 mm Tip angle: 135° Type: Type N (Normal spiral) Material: HSS‑G Shank finish: Fully ground Surface: Bright finished Intended for: Drills for metal / Bohrer für Metall Conforms to: DIN 338 Model series: Basic Line Shaft execution: geschliffen Application machine: Drilling Machine / Handbohrmaschine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills like the MetavCUT Twist Drill are primarily applied to machining high‑strength materials and larger hole diameters. Their geometry makes them straightforward to regrind and capable of withstanding significant loads, so they are well suited for drilling in alloyed and unalloyed Steel, Cast Steel, Cast Iron and hard Plastics. Which 3 drill types are there? There are three common drill categories: Metal drills, Wood drills, and Stone/Concrete drills. These groups reflect typical geometries and point designs optimised for the respective material families. Are you unsure whether this Twist Drill fits specific requirements or need complementary technical data? METAV Werkzeuge offers comprehensive and competent consultation — contact via info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271.
3.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G, 3.7 mm, 135° Tip, Bright Finished by MetavCUT A Twist Drill (Type N) for precision metal drilling, engineered as a short, bright finished HSS‑G tool for use in handheld Drilling Machines and stationary equipment. Short design for improved stability Ground HSS‑G for sharp edges and clean holes 135° tip for harder materials and reduced burrs Fully ground shank for precise concentricity Maximum precision and proven material technology for metalworking The short design combines a HSS‑G ground geometry with the stability benefits of reduced overhang, delivering more consistent concentricity and less deflection. Conforming to DIN 338, this construction provides sharp cutting edges and high runout accuracy; the ground flutes produce clean, burr‑reduced holes in demanding alloys. One direct advantage is faster drilling progress in hard materials compared with conventional rolled drills, making the tool suitable where repeatable precision is required. Best suited applications and machine compatibility Designed primarily as a metalworking tool, the short Type N geometry excels in drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The 135° tip reduces initial cutting forces and improves centring in tougher workpieces, while the compact overall length and 39 mm spiral length lower vibration when used in handheld Drilling Machines or on stationary machines. This configuration supports precise hole placement and reduces the risk of wander on hard surfaces. Handling advice and operating recommendations for longer tool life A fully ground shank and precise flute geometry allow secure clamping and accurate runout; use of appropriate coolant and moderate cutting speeds extends tool life and mitigates brittleness inherent to ground HSS variants. The 70 mm overall length and short overhang favour operations with limited reach and high rigidity; where deep holes or interrupted cuts are required, ensure suitable pecking cycles and stable fixturing. If regrinding is needed, the ground form enables straightforward sharpening while maintaining the original cutting geometry. Choose the MetavCUT short HSS‑G Twist Drill for precise, stable metal drilling — for technical questions or personalised advice METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 45037-FDA Type: Type N Diameter: 3.7 mm Tip angle: 135° Material: HSS‑G Execution: short Colour / Finish: bright finished Shank finish: fully ground Spiral length: 39 mm Overall length: 70 mm Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill (Type N) from MetavCUT? The MetavCUT Twist Drill (Type N) is mainly used for machining high‑strength materials and larger drill diameters; its ground geometry and short design make it particularly suitable for precise work in metals where clean holes and high accuracy are required. Which three drill types exist and where does the MetavCUT Twist Drill fit? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill is a metal drill optimised for steel and similar materials. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cutting edge at the point, which lowers friction and required feed forces; this improves centring and reduces the operator's effort when using the MetavCUT Twist Drill. Can metal drills be used in wood with the MetavCUT Twist Drill? Metal drills like the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically inferior compared with wood‑specific bits; however, metal drills are easier to re‑sharpen and show less aggressive self‑feed.
3.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Profi Line (Type N) – 3.7 mm · 135° Tip · Short · Bright Finished · DIN 338 · HSS‑G The Twist Drill Profi Line is a short Type N metal drill designed for precision drilling in hard materials on drilling machines and hand drills. Short design for increased stability and precision HSS‑G ground geometry for faster, cleaner holes 135° tip angle suited for hard materials Fully ground shank for improved runout accuracy Conforms to DIN 338 for standardised short drills High performance for demanding metalworking with measurable gains The short construction and HSS‑G CNC ground geometry deliver higher stability and precision when machining metal. The reduced overhang minimises bending and chatter, allowing a worker to drill with up to 40% faster advance and requiring about 50% less feed force compared with conventional HSS designs. The result is cleaner holes and reduced rework in applications such as alloyed and unalloyed steel, cast steel and hard plastics. Short design and Type N spiral for reliable centring and durability A shorter overall length means less lateral flex and better concentricity; combined with the Type N normal spiral this design provides dependable chip evacuation for metalworking. The drill is manufactured to DIN 338, the standard for short twist drills with a cylindrical shank, so workshop planning and holder compatibility are simplified. The fully ground flutes produce sharp cutting edges and high roundness, which favours accurate, repeatable holemaking. Suited applications and user groups — who benefits most Craftsmen, maintenance technicians and precision workshops benefit from this short 3.7 mm configuration for controlled drilling in tougher materials. Typical uses include machining on drilling machines, repair work and toolroom operations where small diameters and deep accuracy are required. The combination of short spiral length and 135° point angle reduces walking on start-up and improves performance when penetrating hard surfaces such as stainless steel. Usage tips to extend tool life and ensure best results For best results use adequate coolant and moderate spindle speeds matched to the material; the 135° point reduces entry forces but may require slower speeds on softer metals to avoid work hardening. Because CNC‑ground HSS tools can be slightly more brittle than rolled versions, avoid excessive shock loading and prefer stationary or machine drilling with steady feed. Regrinding is possible; the geometry allows straightforward resharpening while maintaining centring behaviour. Choose the MetavCUT Profi Line short HSS‑G Twist Drill for precision metalworking and contact METAV Werkzeuge for expert support — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48037-FDA Model series: Profi Line Type: Type N Diameter: 3.7 mm Overall length: 70 mm Spiral length: 39 mm Tip angle: 135° Material: HSS‑G Shank: Fully ground Finish: Bright finished Execution: Short For drilling machine: Drilling Machine / Hand drill Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill Profi Line suitable for? The MetavCUT Twist Drill Profi Line is optimised for metalworking; its HSS‑G ground geometry and 135° tip make it particularly effective on alloyed and unalloyed steel, cast steel, gusseisen and hard plastics, providing clean holes and reduced tool wear under appropriate speeds and coolant. For what is a Twist Drill primarily used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters. The short, ground form is easy to resharpen and withstands high loads, making it suitable for demanding metalworking where stability and precision are required. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills, each engineered for the specific material properties they encounter.
3.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 3.8 mm, 118°, Short, Black, DIN 338, HSS (MetavCUT) A Twist Drill in short HSS design for precision metal drilling with Drilling Machines and hand drills. Short HSS Twist Drill Type N 3.8 mm 118° tip for reliable centring Flute length 43 mm for deep metal holes DIN 338 standard for short drills Suitable for Drilling Machines and hand drills Robust HSS construction for reliable metalworking The short HSS construction of this drill bit provides a resilient combination of hardness and elasticity that reduces breakage risk under typical workshop loads. With a 3.8 mm diameter and a short overall design, the bit delivers improved rigidity compared with longer variants, resulting in more consistent hole geometry and less runout during operation. This makes the tool particularly suited for demanding metalworking tasks where stability matters. Precise geometry for clean starts and accurate holes Thanks to the 118° tip angle and Type N geometry, the drill achieves dependable centring and a controlled cutting action in a wide range of metallic materials. The 43 mm flute length supports effective chip evacuation during through-drilling, lowering heat build-up and preserving cutting performance. These features translate into cleaner hole edges and less rework for fabricators and maintenance technicians. Designed for professional and hobby use in metal shops Targeted at workshops, maintenance teams and hobbyists working with metal, this short Twist Drill excels in applications that require tight tolerances and repeatable results. The Type N normal spiral is optimised for steels and common ferrous materials, while the roll-rolled HSS manufacturing process aids durability when drilling small diameters such as 3.8 mm. For users seeking a dependable general-purpose metal drill bit, this item balances service life and ease of re-sharpening. Standard compliance and handling advantages Manufactured to DIN 338, the drill conforms to expectations for short straight-shank twist drills, ensuring compatibility with standard chucks and fixtures. The reduced overhang of the short version increases positional accuracy and lowers the chance of bit deflection, which is especially beneficial when drilling in jigged or clamped setups. Regular sharpening and correct cutting speeds will maintain performance and extend the working life of the tool. MetavCUT recommends this short HSS Type N Twist Drill for precise metalworking tasks — for further technical advice or application-specific guidance contact METAV Werkzeuge. Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40038-FDA Diameter: 3.8 mm Tip angle: 118° Flute length: 43 mm Overall length: 75 mm Type: Type N Material: HSS Standard: DIN 338 Finish / Version: short Colour: black Application: Drills for metal For drilling machine: Drilling Machine Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The Twist Drill from MetavCUT (Type N) is primarily used for the machining of high-strength materials and larger hole diameters in metal. Its short HSS design is easier to re-sharpen, withstands greater loads and therefore reduces the risk of breakage, making it suitable for extensive metalworking tasks. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for metals and similar materials.
Reliable holemaking for every production environment
Metal drill bits, primarily classed as HSS drill bits, deliver process-secure, dimensionally accurate holes across a wide range of metallic materials. Designed for both hand-held drilling and CNC series production, these twist drills maintain cutting performance at elevated temperatures and provide the toughness required for industrial workshop and machining applications.
Why these drills matter in your workflow
The core function of metal drill bits is centred on efficient material removal with consistent hole geometry and repeatable centring. Their geometry and cutting-edge design reduce the need for rework, permit drilling without prior centre-punching on many surfaces, and ensure reliable chip evacuation. In practice, this means shorter cycle times on batch runs, safer setup for manual operations, and stable performance under the demands of production.
- Increased production uptime through predictable tool life and wear behaviour.
- Better first-pass quality thanks to optimised tip geometry and cross-point design.
- Versatile material capability: suitable for structural steels, cast irons and non-ferrous metals.
- Compatibility with hand drills, pillar drills and CNC machines for workshop-to-production scalability.
Benefits you can measure
- Reduced rework rates and improved hole tolerances.
- Longer intervals between tool changes when using HSS-Co 5 or HSS-Co 8 variants.
- Improved centring and reduced walking on smooth surfaces thanks to cross-point geometry.
- Flexibility across material classes from aluminium to hardened steels when selecting the appropriate grade.
Metav as your precision partner
Metav combines decades of industry expertise with a comprehensive range that democratises precision for workshops and procurement teams. From the logistics hub in Emmerich, Metav acts as a quality filter for the European market, supporting over 48,000 customers and stocking more than 250,000 products. For buyers seeking a single, reliable source for high-performance drill solutions, Metav offers consistent availability and a professionally curated selection of metal drill bits and related tooling.
Technical data at a glance
- material: high-speed steel (HSS)
- variant: rolled HSS-R; ground HSS-G; high-alloy HSS-E
- cobalt options: HSS-Co 5; HSS-Co 8
- suitable for: alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron, aluminium, copper, brass
- geometry: typical tip angles 118° and 135°; cross-point (split point) for reduced walking
- application environments: hand drilling, pillar drill, CNC machining
Compact and reliably engineered, these metal drill bits—also referred to as HSS drill bits or twist drills—form the backbone of precision drilling operations in industrial and workshop settings.
FAQ
What distinguishes HSS drill bits from cobalt variants?
HSS drill bits provide high toughness and good performance at elevated temperatures; HSS-Co 5 and HSS-Co 8 variants add cobalt for increased hot hardness and extended tool life when machining tougher or stainless steels.
Which materials can metal drill bits handle reliably?
Metal drill bits are suitable for alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron and non-ferrous metals such as aluminium, copper and brass, depending on the selected grade and geometry.
When should I choose ground HSS-G over rolled HSS-R?
Choose ground HSS-G for higher concentricity, better chip evacuation and longer service life in production; rolled HSS-R is a cost-effective option for standard workshop tasks.
How does tip geometry affect drilling performance?
Tip angles around 118° are common for general-purpose drilling, while 135° tips and cross-point designs improve penetration and reduce walking on harder or polished surfaces.
Can these drill bits be used on CNC machines?
Yes—metal drill bits are suitable for hand-held, pillar and CNC operations; selection of grade and geometry should match the machine capability and workpiece material.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com