Precision metal drills for reliable, high-performance holemaking
Precision metal drills, commonly supplied as HSS twist drills, are engineered to produce clean, dimensionally accurate cylindrical holes in materials such as alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron and non-ferrous metals like aluminium, copper and brass, delivering consistent results in both manual and CNC operations. Their high-speed steel construction provides exceptional toughness, elasticity and fracture resistance, while variants such as roll-formed HSS-R and ground HSS-G offer cost-effective general performance or enhanced runout accuracy and chip evacuation respectively, and HSS-E or HSS-Co types ensure superior hot hardness when machining stainless or highly alloyed steels. Optimised point geometries (typically 118° for softer steels and 135° for harder grades) combined with a cross grind reduce feed force, enable accurate centring and promote efficient chip removal, improving process reliability and prolonging tool life.
7mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra-long HSS‑G 7 mm, 135° point, bright‑finished, fully‑ground shank, DIN 1869 (MetavCUT) The Twist Drill is an extra‑long HSS‑G drill designed for deep metal drilling with a Drilling Machine, offering precise performance for demanding workshop and industrial applications. Extra‑long design for deep bores HSS‑G material for high cutting performance 135° point angle for harder materials Fully ground shank for high concentricity DIN 1869 specification for deep‑hole drilling Durable HSS construction for reliable metal cutting The HSS‑G material and CNC ground flute geometry deliver a robust combination of hardness and sharpness that makes the Twist Drill ideal for metalworking. Ground manufacturing creates very sharp cutting edges and excellent Runout Accuracy, so holes are cleaner and reaming effort is reduced. Because ground drills can be comparatively brittle, the drill performs best under machine conditions and with appropriate Coolant to extend tool life. Designed for deep, precise boreholes in tough materials With an overall length of 225 mm and a spiral length of 155 mm, this extra‑long twist drill reaches deep workpieces where standard lengths cannot. The 7 mm diameter combined with a 135° point angle improves entry in harder steels and stainless materials, reducing the risk of wandering at the start of the bore. Conformity to DIN 1869 ensures suitability for deep‑hole conditions and industrial standards, enabling consistent results in production environments. Best used in machine setups for professional results This twist drill is optimised for use with a Drilling Machine rather than handheld use, thanks to its fully‑ground shank and precision geometry. Professionals in fabrication, maintenance and toolrooms will benefit from faster penetration and lower feed forces—features that support efficient workshop workflows. For stationary drilling rigs or press machines, the drill’s geometry allows better centring and repeatable hole quality. Faster drilling and lower operator effort Testing and manufacturer guidance show that the ground HSS design can enable up to 40% faster drilling and require about 50% less thrust than conventional rolled HSS tools in comparable conditions. That translates into reduced machine load and less operator fatigue during repetitive work. Keep in mind that the extra‑long geometry is specifically targeted at deep or hard‑to‑reach bores and performs best with steady clamping and adequate lubrication. We recommend the MetavCUT extra‑long Twist Drill for professionals needing precise deep metal bores; for personalised technical advice and application support contact METAV Werkzeuge via email, phone or WhatsApp — expert consultation is available to ensure the right tool choice and safe handling 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 32070-FDA Diameter: 7 mm Point Angle: 135° Execution / Type: Extra long Colour: Bright finished Overall Length: 225 mm Spiral Length: 155 mm Shank Execution: Fully ground Material: HSS‑G Standard / Norm: DIN 1869 Application: Drills for metal, for Drilling Machine Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily used for machining high‑strength metals and larger drill diameters; its extra‑long design and ground geometry make it suitable for deep bore operations and difficult‑to‑access drilling tasks in professional metalworking. Which three drill types are commonly distinguished? The three main drill types are Metal drills, Wood drills, and Masonry/Concrete drills, where the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking applications.
7mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long Drill Bit (7 mm, 135°) HSS‑G, Bright Finished, DIN 1869 — MetavCUT A Twist Drill extra long HSS‑G drill bit for Drilling Machines, designed for deep metal drilling and precise holemaking. 7 mm diameter for precision metalwork Extra long design for deep bore applications Fully ground shank for high concentricity HSS‑G material for hard metals and longevity 135° tip angle reduces walking in tough materials Faster deep drilling thanks to extra long design The extra long overall length delivers the reach required for deep drilling tasks without the need to reposition workpieces, making the bit ideal for access-restricted setups. Made from HSS‑G, this Twist Drill combines hardness with a ground geometry that produces clean, precise holes in steel and cast materials; the CNC grinding process yields sharp cutting edges and high runout accuracy, which shortens machining time and improves repeatability. Reliable penetration in hard materials with 135° tip A 135° tip angle provides a more gradual cutting action suited to harder alloys and stainless steels, lowering the risk of chipping at the entry and improving centering when starting a hole. This geometry reduces the need for pilot operations in many cases and helps maintain edge life under elevated contact stresses, so fewer tool changes are necessary during a job. Clean chips and better cooling for extended tool life The deep spiral flute (spiral length 200 mm) evacuates swarf efficiently from deep bores, while the bright finished surface supports smoother chip flow and easier cleaning. When used with appropriate coolant and a stable setup on a Drilling Machine, the combination of flute geometry and fully ground shank minimizes heat build-up and supports longer service intervals for the cutting edge. Precise guidance and handling in production environments The fully ground shank (fully ground) ensures excellent concentricity and stable clamping, reducing vibration and improving surface quality of the bore. Consciously engineered to DIN 1869 tolerances, this Twist Drill is suited for workshop and production use where consistent hole quality and interchangeability are required. Who benefits from this drill and how to use it Designed primarily for machining professionals and maintenance technicians working with legierter and unlegierter steels, cast iron and non‑ferrous metals, this bit excels where deep, accurate holes are required. For best results, secure the workpiece, use a stable Drill Machine setting, apply suitable coolant, and avoid excessive feed to prevent brittle fracture typical of ground HSS tools. METAV CUT recommends this Twist Drill for demanding deep metal drilling tasks; for personalised technical advice or to verify suitability for a specific application, METAV Werkzeuge offers expert consultation — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 33070-FDA Diameter: 7 mm Overall length: 290 mm Spiral length: 200 mm Tip angle: 135° Material: HSS‑G Standard: DIN 1869 Finish: Bright finished Shank execution: Fully ground Execution: Extra long For: Drilling Machine Model series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT best used for? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger drill diameters; its extra long configuration and HSS‑G grade make it well suited for deep holes in legierte and unlegierter steel, cast iron and hard plastics, providing clean, precise bores under demanding conditions. Can the MetavCUT Twist Drill be used with a regular drilling machine? Yes, this MetavCUT Twist Drill is designed for use in a Drilling Machine; for optimal performance secure the bit in a precise chuck, apply appropriate coolant and moderate feed rates to exploit the ground geometry and avoid undue stress on the cutting edge. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their shape makes them easy to sharpen and capable of withstanding significant loads. Which three drill types exist? There are three common categories: metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑cut at the tip, lowering friction and thus the required feed forces; it also improves centring at the start of the hole, giving better guidance and less wander. Can metal Twist Drills be used to drill wood? Metal Twist Drills can be used in wood, but they generally offer less guidance and a less clean finish than dedicated wood drills; however, they are easier to resharpen and exhibit less self‑feeding tendency. At what drilling depths are Twist Drills most commonly used? Twist Drills are the go‑to tool for through drilling in solid materials; they are most frequently used for diameters up to about 20 mm and depths up to around 100 mm. Is HSS or HSSE better? The common assumption that HSSE is categorically superior to HSS is not universally true; when choosing, assess whether your working conditions justify the higher cost of HSSE for improved wear resistance in specific applications.
7mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Profitieren Sie von der Kombination aus schneller Schneidgeometrie und extra langer Bauform: Der geschliffene HSS-G Spiralbohrer liefert präzise, saubere Bohrungen in legiertem und unlegiertem Stahl, während die Norm DIN 1869 Verlässlichkeit bei tiefen Bohrungen sicherstellt. Bestellen Sie den Bohrer bequem direkt bei Metav und lassen Sie sich bei technischen Fragen von unserer Beratung unterstützen. Spiralbohrer 34070-FDA — extra lang, HSS-G Der Spiralbohrer 34070-FDA ist ein extra langer HSS-G-Bohrer für tiefe Metallbohrungen mit hoher Rundlaufgenauigkeit. Spiralbohrer «34070-FDA» von MetavCUT HSS-G geschliffen für präzise Metallbohrungen Extra lang: Gesamtlänge 370 mm, Spirallänge 250 mm Spitzenwinkel 135° für harte Werkstoffe Norm DIN 1869, Verpackungseinheit 10 Tiefe Bohrungen mit geringem Kraftaufwand für produktive Werkstätten Der geschliffene HSS-G Bohrer wurde für tiefe Bohrungen entwickelt und bietet durch die längere Arbeitslänge echte Praxisvorteile bei schwer zugänglichen Stellen. Durch die geschliffene Geometrie reduziert sich die erforderliche Anpresskraft um bis zu 50 %, was die Belastung von Handbohrmaschine und Anwender verringert. Gleichzeitig ermöglicht die optimierte Spanführung saubere Bohrbilder und verkürzt die Bearbeitungszeit um bis zu 40 %. Diese Kombination erhöht die Effizienz bei Reparatur- und Instandsetzungsarbeiten erheblich. Präzision und Materialverträglichkeit für anspruchsvolle Werkstoffe Mit einem Spitzenwinkel von 135° dringt der Bohrer kontrolliert in härtere Werkstoffe ein und eignet sich für legierten sowie unlegierten Stahl bis 1000 N/mm². Die geschliffene Schaftausführung sorgt für hohen Rundlauf und exakte Bohrungen, ideal wenn Maßhaltigkeit zählt. Für beste Ergebnisse empfiehlt sich das Anpunkten vor dem Bohren und der Einsatz von Kühlschmierstoff bei zähen Materialen, um Lebensdauer und Genauigkeit weiter zu steigern. Einsatzbereich und Anwendernutzen für Werkstatt und Montage Der Bohrer fällt in den Standard-Bereich für Durchmesser und ist besonders geeignet für den Einsatz in Handbohrmaschine sowie stationären Säulenbohrmaschinen. Anwender profitieren von der Extra-Länge bei tiefen Bohrungen oder bei Arbeiten an langen Bauteilen. Die Spirallänge 250 mm ermöglicht effiziente Spänetransport bei moderaten Tiefen; dennoch sind bei sehr tiefen Sacklochbohrungen zusätzliche Maßnahmen wie Vorschubkontrolle und Kühlung empfohlen. Hinweise zur Handhabung und Lagerung für lange Standzeiten Da geschliffene HSS-G Werkzeuge eine sehr scharfe Schneide bieten, sollten Stöße und Verkantungen vermieden werden, um Bruchrisiken zu minimieren. Bei stationärem Einsatz und kontrollierter Kühlung entfaltet der Bohrer sein volles Potenzial. Die Blank-Oberfläche verlangt keine besondere Oberflächenbehandlung, jedoch schützt sachgerechte Lagerung vor Korrosion und mechanischer Beschädigung, wodurch sich die Lebensdauer merklich verlängert. Greifen Sie auf den geschliffenen HSS-G Spiralbohrer von MetavCUT zurück und bestellen Sie über Metav; bei offenen Fragen erreichen Sie unsere Techniker per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 34070-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Ausführung: extra lang Material: HSS-G Norm: DIN 1869 Farbe: blank Daten Durchmesser: 7 mm Gesamtlänge: 370 mm Spirallänge: 250 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Schaftausführung: geschliffen Einsatz: Handbohrmaschine HSS-G: geschliffen, hohe Schnittschärfe DIN 1869: Tieflochspirale für extra tiefe Bohrungen FAQ Für welche Materialien ist der Bohrer geeignet? Der MetavCUT Spiralbohrer 34070-FDA aus HSS-G eignet sich für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff; bei sehr harten Werkstoffen ist auf passende Kühlung zu achten. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer 34070-FDA ist für den Einsatz mit Handbohrmaschine geeignet; für beste Präzision empfiehlt sich Anpunkten und kontrollierter Vorschub. Wie tief kann man mit diesem Bohrer sicher arbeiten? Die extra lange Ausführung mit Gesamtlänge 370 mm und Spirallänge 250 mm ist für tiefe Bohrungen ausgelegt; bei sehr tiefen Sacklöchern sind mehrstufiges Bohren und Kühlung ratsam. Ist dieser Bohrer für Serienfertigung geeignet? Der MetavCUT Spiralbohrer 34070-FDA ist für Werkstatt- und Serienarbeiten im mittleren Umfang geeignet; bei hohen Stückzahlen in gehärtetem Stahl sind Vollhartmetallwerkzeuge wirtschaftlicher. Welche Vorteile hat die geschliffene Ausführung gegenüber gewalzten Bohrern? Geschliffene Spiralbohrer (HSS-G) bieten schärfere Schneiden, bessere Rundlaufgenauigkeit und sauberere Bohrbilder, sind aber empfindlicher gegenüber Stoß- und Kippbelastung und profitieren von stationärem oder gut kontrolliertem Einsatz.
7mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Twist Drill — left-cutting HSS‑G metal drill, Ø 7 mm, 135° (DIN 338) by MetavCUT The Twist Drill is a left‑cutting metal drill bit for Drilling Machine use, designed for fast, precise removal of broken or seized screws and reliable machining of alloyed and unalloyed steels. Left‑cutting geometry for screw extraction and reverse drilling HSS‑G material for high wear resistance 135° point angle for harder materials like stainless steel Conforms to DIN 338 for short cylindrical shank bits Optimised cutting: up to 40% faster drilling with less thrust Faster results when extracting screws and working in reverse The left‑cutting geometry of this bit gives a decisive advantage when encountering broken or jammed screws: the cutting lips are ground so the drill cuts correctly in left rotation, which often helps to unscrew and remove the damaged fastener while drilling. This construction also reduces the tendency to pull the bit into the workpiece and, in many cases, allows for a more controlled extraction process. The left‑cutting feature therefore converts a common workshop problem into a predictable, solvable task. Durable performance through HSS‑G and Profi Line engineering Manufactured from HSS‑G, this Twist Drill offers elevated hardness and heat resistance compared with standard HSS grades, resulting in longer tool life under high loads. The Profi Line design emphasises dimensional accuracy and consistent edge geometry, so wear patterns remain predictable and regrinding is straightforward. For users who need repeatable performance in tougher materials, the combination of HSS‑G and professional series quality translates into fewer tool changes and less downtime. Optimised point angle for hard materials and reduced walking A 135° point angle is specified for improved centring and longer edge life when machining harder materials such as stainless steel and cast components. The flatter point reduces penetration shock and helps avoid chatter at the start of a hole. In practical terms, this means cleaner entry holes and better control when drilling alloys and tempered steels, especially in combination with an appropriate coolant and steady feed. Standardised dimensions for reliable machine compatibility This Twist Drill is produced to DIN 338, the classification for short twist drills with cylindrical shank, which ensures compatibility with a wide range of bench and portable drilling machines. The Ø 7 mm diameter and standard shank dimensions permit quick clamping and stable rotation in chucks and collets. Choosing a DIN‑compliant bit reduces the risk of misfits and simplifies tool inventory management for workshops and industrial operations. Practical benefits for workshop and maintenance applications Beyond material and geometry, this bit is tailored for real workshop needs: reduced thrust force during cutting can make hand‑held drilling less strenuous and improve operator control, while the left‑cutting option expands the bit’s usefulness for maintenance tasks such as extracting corroded or stripped screws. The resulting time savings and increased first‑pass success rate benefit both craftspersons and production teams with frequent metalworking demands. Simple explanation of key terms for everyday use If the terminology is unfamiliar, here is a brief guide: left‑cutting means the flutes and cutting edges are ground to cut effectively when the spindle turns counterclockwise; HSS‑G is a high‑speed steel grade with enhanced properties for heavy cutting; a 135° point angle produces a flatter tip suited to hard materials; and DIN 338 specifies short, cylindrical‑shank twist drills commonly used in metalworking. These characteristics combine to make the bit a specialist solution rather than a general‑purpose wood or masonry tool. Choose the MetavCUT Profi Line Twist Drill with 7 mm diameter and 135° point angle for demanding metalwork — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 60070-FDA Durchmesser: 7 mm Spitzenwinkel: 135° Ausführung: left cutting (linksschneidend) Typ: Twist Drill for Drilling Machine Material: HSS‑G Norm: DIN 338 Modellserie: Profi Line Anwendung: Drills for metal (Bohrer für Metall) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT best used for The MetavCUT Twist Drill is primarily intended for metalworking, with a particular strength in extracting broken or seized screws thanks to its left‑cutting geometry; it is also suitable for drilling alloyed and unalloyed steels when used in a Drilling Machine. Does the MetavCUT Profi Line Twist Drill require a special machine? The MetavCUT Profi Line Twist Drill needs a drilling machine capable of running in reverse (left rotation) to exploit the left‑cutting grind; for conventional forward drilling the same DIN 338 bit shape is compatible with standard chucks, but screw‑extraction performance requires left rotation. For what is a Twist Drill used A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; the shape is easy to regrind and withstands higher loads, which makes it suitable for demanding metalwork and repair tasks. Which three drill types exist There are three principal drill types: Metal drills, Wood drills, and Stone/Concrete drills. Why are twist drills pointed Pointing a Twist Drill reduces the cross‑cut at the tip; this lowers friction and therefore reduces required thrust force while improving centring of the drill tip in the workpiece. Can a Twist Drill be used for wood A Metal drill can be used in wood, but guidance and finish will be inferior compared with a purpose‑made wood drill; metal drills are easier to regrind and usually have less self‑feeding action. For which drilling depths is the Twist Drill most used A through hole in solid material is commonly produced with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most frequently used tool. Is HSS or HSSE better The common belief that HSSE steels are always superior to HSS is incorrect; you should evaluate whether the working conditions justify the higher cost of HSSE before deciding.
7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — MetavCUT short HSS‑G 7 mm, 135° tip, bright finished, DIN 338 The Twist Drill Type N short from MetavCUT is a precision HSS‑G 7 mm drill bit with a 135° tip angle, bright finished and fully ground shaft, engineered for metalworking on Drilling Machines. HSS‑G ground for up to 40% faster drilling 135° tip for hard and stainless steels Short design for higher stability and precision Fully ground shaft for improved concentricity Conforms to DIN 338 for short twist drills Faster machining with less effort thanks to HSS‑G technology Designed primarily for professional metalworking, this HSS‑G short Twist Drill delivers greater drilling performance and reduced operator effort. The ground finish of the cutting edges enables up to 40% faster penetration and requires significantly lower feed force compared with conventional HSS bits. Because the bit is short, it exhibits higher rigidity and reduced deflection, which directly improves hole accuracy when working in alloys, cast steels or temper cast materials. For users who prioritise efficiency on a Drilling Machine, this design translates into measurable time savings and more consistent results. Stable holes and reliable centring for demanding materials The 135° tip angle is chosen to perform reliably in harder materials such as stainless steel, where a blunter tip reduces wandering and shortens dwell time at the start of the hole. The Type N normal spiral geometry provides a universal flute form suited to metal drilling while the fully ground shaft improves concentricity and chuck clamping. Conforming to DIN 338 ensures consistent dimensions and manufacturing quality across the Basic Line series, so users benefit from reproducible drilling performance and predictable tool behaviour under higher loads. Optimised for metalworking applications and precise tasks Engineered for tasks where precision matters, this short Twist Drill is especially suited to drilling in unalloyed and alloyed steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. The combination of Type N spiral geometry and the bright finished surface supports chip evacuation and prolongs tool life when paired with appropriate cutting fluid. Contractors, workshops and maintenance professionals will value the bit for producing clean, accurate holes in component manufacture, repair work and installation tasks. Practical handling, compatibility and supplier support The reduced overall length and the short spirallength improve handling and reduce the tendency to chatter in handheld and bench Drilling Machines. The fully ground shaft simplifies clamping and increases runout accuracy, which benefits threaded hole preparation and reaming follow‑up. If there is uncertainty whether this Twist Drill Type N suits a specific machine or material, METAV Werkzeuge provides extensive and competent advice to help select the right tool or to supply additional technical data. Choose the MetavCUT Twist Drill Type N for reliable metal drilling performance, and contact METAV Werkzeuge for expert advice by email info@metav-werkzeuge.com or by phone +49 2822 7131930 — WhatsApp available at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 27070-FDA Type: Type N Diameter: 7 mm Tip angle: 135° Material: HSS‑G Standard: DIN 338 Execution: short Colour: bright finished Shaft finish: fully ground Spiral length: 69 mm Overall length: 109 mm Application: Drills for metal / Drilling Machine compatibility Model series: Basic Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger drill diameters; its geometry and HSS‑G composition make it suitable for alloyed and unalloyed steel, cast steel and similar tough materials, and its form is relatively easy to re‑grind while withstanding greater loads. Which 3 drill types are there? Commonly distinguished drill types are: Metal drill bits, Wood drill bits and Stone/Concrete drill bits, with the MetavCUT Twist Drill Type N belonging to the metal drill category.
7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — 7 mm, 135° Point Angle, Short, Bright finished, HSS-G, DIN 338 A Twist Drill (Type N) designed for precise metal drilling in Drilling Machines, offering a short, stable geometry for work on hard materials. Short design for improved stability HSS-G material for high cutting performance 135° point angle for hard materials Fully ground shank for excellent runout accuracy Durable HSS-G construction for faster, cleaner holes The HSS-G material of this Twist Drill ensures high wear resistance and reliable cutting behaviour when machining Steel and other Alloys. Because the flute geometry is produced by CNC grinding, the tool achieves very sharp cutting edges and a high concentricity, which translates into cleaner holes and longer tool life under correct cutting conditions. Users will benefit from up to 40% faster drilling and about 50% less feed force compared with conventional HSS designs, provided adequate coolant and appropriate speeds are used. Short overall length increases precision and reduces vibration A shorter design reduces the exposed overhang and therefore minimizes bending and chatter during operation. This results in higher positional accuracy and makes the drill particularly suitable for precise work in hardened materials such as Stainless Steel. The designation to DIN 338 confirms the geometry and format as a short Twist Drill with a Cylindrical Shank, ensuring compatibility with common chucks and fixtures in metalworking shops. Geometry optimised for metalworking and hard materials The 135° point angle is tailored to reduce initial drilling forces and improve centring in tough materials, shortening pilot time and improving surface finish in the hole. As a Type N (normal spiral) drill, this tool is engineered primarily for Metal applications including Cast Iron, Sintered Iron, Tempered Castings, Non-Ferrous Metals and Hard Plastics. For best results, use on stationary or machine-mounted Drilling Machines and apply appropriate cooling to avoid tempering the cutting edge. Target users and handling recommendations Workshop professionals, toolroom technicians and demanding hobbyists will appreciate the combination of a short flute length and a fully ground shank that delivers consistent runout and repeatable hole quality. To avoid brittleness-related breakage, operate the Twist Drill with steady feed, adequate coolant and secure clamping. Ground drills can be re-sharpened more easily than rolled equivalents, maintaining edge quality and service life when reconditioned correctly. We recommend the MetavCUT Twist Drill for precise metalworking applications; for technical advice or to confirm suitability for a specific material or machine, METAV Werkzeuge provides expert consultation – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45070-FDA Diameter: 7 mm Point Angle: 135° Type: Type N Execution: Short Finish: Bright finished Shank Execution: Fully ground Material: HSS-G Norm: DIN 338 Spiral Length: 69 mm Total Length: 109 mm For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill is primarily used for machining high-strength materials and larger hole diameters. Its ground geometry is easy to re-sharpen and withstands higher loads, making it suitable for demanding metalworking tasks where durability and precision are required. Which three drill types exist? For context, the MetavCUT Twist Drill belongs to the metal-drill category. The three main drill types are Metal drills, Wood drills and Stone/Concrete drills.
7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die kurze Ausführung des Spiralbohrers vereint erhöhte Stabilität durch reduzierte Auskraglänge mit der schneidstarken HSS-G-Geometrie und dem 135° Spitzenwinkel, was präzise Bohrungen in legierten und unlegierten Stählen erleichtert. Nutzen Sie die Kombination aus Robustheit, Schnittleistung und Normkonformität für zuverlässige Ergebnisse und bestellen Sie den Bohrer über Metav Werkzeuge oder fragen Sie unsere technische Beratung an. Spiralbohrer von MetavCUT — Kurzer HSS-G Metallbohrer (Typ N), 7 mm Der Spiralbohrer ist ein kurzer, geschliffener HSS-Bohrer nach DIN 338, entwickelt für präzise Metallbohrungen in Stahl, Guss und Nichteisenmetallen. Kurze Ausführung für hohe Stabilität HSS-G geschliffen für präzise Bohrlöcher Spitzenwinkel 135° für härtere Werkstoffe Zylinderschaft passend für Handbohrmaschine DIN 338 Konformität, Profi Line Qualität Präzise Führung durch geringe Auskraglänge Die kürzere Bauform reduziert die Auslenkung und steigert die Stabilität beim Bohren, wodurch saubere und maßhaltige Bohrlöcher erreicht werden. Durch die HSS-G-Fertigung ist die Schneidkante sehr scharf und die Rundlaufgenauigkeit hoch, was besonders beim Bohren in härteren Metallen wichtig ist. Anwender profitieren von weniger Vibration, geringerer Bruchanfälligkeit bei stationärem Einsatz und einer zuverlässig wiederholbaren Bohrqualität. Angepasste Geometrie für harte Werkstoffe Der 135° Spitzenwinkel sorgt für ein leichteres Eindringen in zähe Materialien und reduziert das Ausblättern am Bohrlochansatz. Die geschliffene Spiralgeometrie steigert die Spanabfuhr und ermöglicht bei richtigen Schnittwerten ein schnelleres Bohren bei geringer Anpresskraft. Typ N steht für die bewährte Normalspirale, die sich besonders für legierte und unlegierte Stähle sowie Gusswerkstoffe eignet; bei rostfreien Stählen empfiehlt sich Kühlschmierstoff zur Lebensdauerverlängerung. Einsatzbereiche und Anwendernutzen Dieses Werkzeug richtet sich an Werkstätten, Instandhaltung und professionelle Heimwerker, die Metall präzise bearbeiten wollen. Die Ausführung ist für den Einsatz an Handbohrmaschinen und stationären Maschinen geeignet; der kurze Schaft verbessert die Handhabung und die Maßhaltigkeit. Die MetavCUT Profi Line ist besonders dann vorteilhaft, wenn wiederholgenaue Ergebnisse und eine robuste Verarbeitung gefragt sind. Norm, Verarbeitung und praktische Hinweise Die Fertigung nach DIN 338 garantiert Maße und Ausführung entsprechend gängiger Industriestandards. Geschliffene Bohrer bieten hohe Schnittgüten, verlangen jedoch sorgfältige Handhabung; bei längeren Schnittzyklen empfehlen sich stationäre Aufnahmen und Kühlung. Zur Präzisionssteigerung kann vorgepunktet oder ein Zentrierbohrer eingesetzt werden, vor allem bei anspruchsvollen Passungen. Setzen Sie auf die Profi Line von MetavCUT und fordern Sie Ihr Angebot direkt per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 an — schnelle Lieferung ab Emmerich und fachkundige Beratung inklusive Produktmerkmale Artikelnummer: 48070-FDA Marke: MetavCUT Serie: Profi Line Fakten Durchmesser: 7 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Norm: DIN 338 (Kurzspiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale, für Metall) Schaft Ausführung: geschliffen Farbe: blank (bright finished) Ausführung: kurz Für Bohrmaschine: Handbohrmaschine FAQ Was unterscheidet diesen Bohrer von Standardspiralbohrern? Der Spiralbohrer von MetavCUT aus der Profi Line zeichnet sich durch die kurze Ausführung und die geschliffene HSS-G-Geometrie aus; dadurch erhöht sich die Stabilität und die Bohrleistung in harten Werkstoffen im Vergleich zu längeren Standardbohrern. Eignet sich der Bohrer für Edelstahlarbeiten? Ja, der Bohrer mit 135° Spitzenwinkel und HSS-G-Material ist für härtere Werkstoffe wie Edelstahl geeignet; bei rostfreien Stählen wird jedoch die Verwendung von Kühlschmierstoff empfohlen, um Standzeit und Schnittverhalten zu verbessern. Kann ich den Bohrer in einer Handbohrmaschine verwenden? Der Spiralbohrer ist für den Einsatz an Handbohrmaschinen geeignet und verfügt über einen geschliffenen Zylinderschaft; bei höherer Präzision empfiehlt sich jedoch die Aufnahme in eine stationäre Maschine. Welche Vorteile bietet die Fertigung nach DIN 338? Die DIN 338 stellt sicher, dass Abmessungen, Schaftform und Ausführung den Industriestandards entsprechen; das erleichtert die Austauschbarkeit und gewährleistet konstante Qualität bei den MetavCUT Profi Line Spiralbohrern (SKU 48070-FDA).
7mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
MetavCUT Twist Drill (Short, 7 mm, 118°, TiN-coated, HSS-G, DIN 338, Fully ground shank) The MetavCUT Twist Drill is a short Twist Drill engineered for precision metal drilling, offering a 7 mm diameter, a 118° tip angle and a TiN coating for longer tool life. Short design for increased stability 7 mm Diameter for precise holes 118° Tip Angle for easier penetration TiN-coated HSS for extended tool life Fully ground shank for fast drilling High performance and measurable efficiency for metalworking The MetavCUT Twist Drill combines a short design with HSS-G material and a TiN-coated surface to reduce friction and extend service life. The ground geometry delivers up to 40% faster drilling and requires 50% less feed force compared with conventional HSS drills, which directly reduces operator effort and cycle times. The TiN coating further lowers wear when used with an appropriate cooling system, making the tool particularly suitable for alloyed and unalloyed steel, Tempered Cast Iron and other non-ferrous metals. Precision, stability and guidance in every hole A reduced overall length and a shortened overhang increase stability and reduce deflection, so holes come out more accurate on both stationary and portable machines. The fully ground shank and ground flutes ensure excellent centring and a clean chip evacuation pattern, translating to improved surface finish and repeatable hole quality. The 118° tip angle supports reliable penetration on slightly softer metals and reduces walking on curved surfaces. Clear application range and machining recommendations This short Twist Drill is optimised for drilling into metals such as steel, Cast Iron, Sintered Iron, Copper, Bronze and Hard Plastics. Use with a suitable Drilling Machine or a stable hand drill at the correct speed for the material; cooling is recommended for tougher alloys to maximise lifetime. The drill conforms to DIN 338, which specifies short cylindrical-shank high-speed steel drills; the ground manufacturing process (HSS-G) provides sharp cutting edges and high run-out accuracy, best exploited under rigid clamping and controlled feeds. Who benefits and why this design matters Workshop professionals and production technicians will appreciate the tool’s combination of precision and durability. The short geometry suits tasks requiring minimal vibration and exact hole placement, for example in jig work or when working close to edges. Because the cutter is easier to regrind than some other types, maintenance and refurbishment are straightforward, making this an economical choice for repetitive machining of medium-hard materials. We recommend the MetavCUT short TiN-coated Twist Drill for demanding metalworking tasks; METAV Werkzeuge offers expert technical advice and support if you are unsure whether this tool meets your requirements — contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 28070-FDA Diameter: 7 mm Overall length: 109 mm Spiral length: 69 mm Tip angle: 118° Type / Execution: Short Material: HSS-G Surface / Coating: TiN-coated Shank finish: Fully ground Suitable for: Drilling Machine / Hand drill Application: Drills for metal Standard: DIN 338 Model series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A Twist Drill such as the MetavCUT Twist Drill is primarily used for machining high-strength materials and larger bore diameters; its design can be ground easily and withstands significant loads, making it suitable for steels and other hard materials. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills, each optimised for material-specific cutting geometry and chip removal behavior.
7mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Kombination aus hoher Standzeit durch TIN-Beschichtung und präziser HSS-G-Geometrie ermöglicht schnelle, saubere Bohrungen in Stahl und Nichteisenmetallen; die kurze Ausführung sorgt für zusätzliche Stabilität. Bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung an. Spiralbohrer 7 mm von MetavCUT (kurze Ausführung, HSS-G) Der Spiralbohrer ist ein kurzer, geschliffener HSS-G-Bohrer nach DIN 338 für präzises Metallbohren in stationären und handgeführten Maschinen. Kurze Ausführung für erhöhte Stabilität TIN-Beschichtung für längere Lebensdauer Geschliffenes HSS-G: Präzise Bohrlöcher Spitzenwinkel 135°: ideal für harte Werkstoffe DIN 338-konform; Zylinderschaft, Typ N Stabilität und Präzision beim Metallbohren Dank der kurzen Bauform reduziert sich die Auskraglänge, wodurch sich die Stabilität beim Bohren deutlich erhöht. Die geschliffene Schneidgeometrie sorgt für scharfe Kanten und eine hohe Rundlaufgenauigkeit, was zu sauberen, maßhaltigen Bohrlöchern in Stahl, Temperguss und Gusseisen führt. Diese Eigenschaften machen den Bohrer zu einer belastbaren Wahl für präzise Fertigungsaufgaben. Höhere Effizienz bei geringerem Kraftaufwand Der geschliffene HSS-Bohrer ermöglicht ein bis zu 40 % schnelleres Bohren und benötigt dabei etwa 50 % weniger Anpresskraft als herkömmliche HSS-Varianten. Die TIN-Beschichtung reduziert Reibung und Verschleiß, besonders bei geeigneter Kühlung, und verlängert so die Standzeit. Das Ergebnis sind kürzere Bearbeitungszeiten und weniger Werkzeugwechsel in der Fertigung. Vielseitige Anwendung in Werkstatt und Produktion Als Produkt aus dem Standard-Bereich eignet sich der Bohrer für Werkstatt, Montage und anspruchsvolle DIY-Arbeiten. Er ist geeignet für dünne bis mittlere Bleche, Profile und Flachstahl sowie für Nichteisenmetalle wie Kupfer und Bronze. Die Kombination aus Typ N-Normalspirale und Zylinderschaft macht ihn praktikabel für Handbohrmaschine und stationäre Maschinen gleichermaßen, solange die Anwendung keine extrem tiefen Löcher über das fünffache des Durchmessers erfordert. Normkonforme Verarbeitung und Materialeigenschaften Die Fertigung nach DIN 338 und die Ausführung als HSS-G (geschliffen) garantieren definierte Qualitätsmerkmale: scharfe Spangebende Kanten und hohe Präzision. Als Typ N-Normalspirale ist der Bohrer für allgemeine Metallbearbeitung optimiert. Hinweis: Geschliffene Bohrer sind sehr leistungsfähig, können aber bei unsachgemäßer Handhabung spröder reagieren; Kühlung und stationäre Spannmittel erhöhen die Sicherheit. Empfehlung: MetavCUT Spiralbohrer mit TIN-Beschichtung für dauerhafte Präzision — Bestellbar über Metav, bei Fragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 46070-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie / Baureihe: Standard Line Typ: Typ N Ausführung: kurz Farbe: TIN-beschichtet Material: HSS-G Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Schaft Ausführung: geschliffen Fakten Durchmesser: 7 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten TIN-beschichtet: Titan-Nitrid-Beschichtung, erhöht Verschleißfestigkeit HSS-G: Geschliffener Schnellarbeitsstahl, sehr scharfe Kanten DIN 338: Norm für kurze Spiralbohrer mit Zylinderschaft Typ N: Normalspirale, klassisch für Metallbohrungen FAQ Für welche Materialien eignet sich der Bohrer besonders? Der MetavCUT Spiralbohrer in HSS-G mit TIN-Beschichtung eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie Nichteisenmetalle wie Kupfer und Bronze. Passt der Bohrer in eine Handbohrmaschine? Ja, die Ausführung mit Zylinderschaft und die Angabe „Für Bohrmaschine: Handbohrmaschine“ machen den Spiralbohrer geeignet für handgeführte Geräte sowie stationäre Maschinen. Welche Vorteile bringt die TIN-Beschichtung? Die TIN-Beschichtung reduziert Reibung und Verschleiß, erhöht die Lebensdauer und verbessert die Wärmebeständigkeit beim Bohren in Metall. Warum ist die Ausführung „geschliffen“ relevant? Geschliffene HSS-G-Bohrer bieten höhere Schärfe und Rundlaufgenauigkeit, was zu präziseren Bohrlöchern führt; sie sind jedoch empfindlicher gegenüber schlagartigen Belastungen. Gibt es eine Modellbezeichnung oder SKU für Nachbestellungen? Die Artikelnummer des Spiralbohrers lautet 46070-FDA; diese SKU erleichtert Nachbestellungen und die Kommunikation mit Metav.
7mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Nutzen Sie die Kombination aus kurzer Ausführung für mehr Stabilität, der TIN‑Beschichtung für reduzierte Reibung und dem geschliffenen HSS‑G‑Material für schnelle, kraftarme Bohrfortschritte; bestellen Sie den Bohrer direkt über METAV Werkzeuge oder fordern Sie bei Bedarf die technische Beratung an. Spiralbohrer von MetavCUT »Profi Line« — Typ N, HSS‑G, Ø 7 mm, kurz Der Spiralbohrer in kurzer Ausführung wurde für präzise Metallbearbeitung entwickelt und eignet sich besonders für legierten und unlegierten Stahl sowie Nichteisenmetalle auf Handbohrmaschinen und stationären Maschinen. Kurze Ausführung für hohe Stabilität HSS‑G geschliffen für sehr scharfe Schneiden TIN‑Beschichtung reduziert Hitze und Verschleiß Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Stabile Konstruktion für präzise Metallbohrungen Die kurze Bauform reduziert die Auskraglänge und sorgt so für höhere Stabilität und weniger Flattern beim Bohren. Das Ergebnis sind sauberere Bohrlöcher und bessere Maßhaltigkeit, speziell bei harten Werkstoffen. Aufgrund des Durchmessers fällt der Bohrer in den Standard‑Bereich und ist deshalb sowohl für die Werkstatt als auch für den mobilen Einsatz mit Handbohrmaschine geeignet. Tiefe Sacklochbohrungen über das Fünffache des Durchmessers hinaus sollten vermieden werden, da die Spanabfuhr und Rundlaufgenauigkeit bei sehr tiefen Löchern abnehmen können. Material und Beschichtung verlängern Standzeit Der geschliffene HSS‑G‑Werkstoff ermöglicht sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, wodurch das Bohren im Metall bis zu 40 % schneller erfolgen kann und gleichzeitig bis zu 50 % weniger Anpresskraft erforderlich ist. Die TIN‑Beschichtung (Titan‑Nitrid) reduziert Reibung und thermische Belastung, was die Lebensdauer des Werkzeugs erhöht. Bei anspruchsvollen Materialien empfiehlt sich die Nutzung einer Kühlschmierstoffzufuhr, damit die Beschichtung optimal wirkt und der Verschleiß weiter minimiert wird. Zielgruppen und typische Anwendungen Der Bohrer richtet sich an Metallbauer, Instandhalter, Werkzeugmacher und ambitionierte Werkstätten, die Wert auf präzise und wirtschaftliche Bearbeitung legen. Einsatzgebiete sind das Bohren in legierten und unlegierten Stahl, Gusswerkstoffe, Sintereisen, Temperguss sowie Nichteisenmetalle wie Kupfer, Bronze und Neusilber. Auch Hartkunststoffe lassen sich mit diesem Bohrer zuverlässig bearbeiten. Für Großserien in gehärtetem Stahl oder sehr tiefe Bohrungen sind hingegen speziellere Werkzeuge sinnvoller. Geometrie, Norm und praktische Hinweise für die Auswahl Die Ausführung entspricht der Norm DIN 338, die kurze Spiralbohrer mit Zylinderschaft klassifiziert. Die Normalspirale Typ N und der Spitzenwinkel von 135° machen den Bohrer besonders geeignet für härtere Werkstoffe, weil der Anbohrvorgang kontrollierter erfolgt. Geschliffene Bohrer bieten sehr saubere Bohrbilder, können jedoch spröder sein; daher sind stationäre Aufnahmen und ggf. Kühlschmierstoffe empfehlenswert. Für größere Durchmesser empfiehlt sich das schrittweise Aufbohren, um die Querschneide zu entlasten. Setzen Sie auf die Präzision der MetavCUT Profi Line: Fordern Sie den TIN‑beschichteten HSS‑G‑Bohrer über METAV Werkzeuge an oder klären Sie technische Details direkt mit der Fachberatung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 41070-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Typ: Typ N Norm: DIN 338 Daten: Durchmesser: 7 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (G = geschliffen) Schaftausführung: geschliffen Oberfläche: TIN‑beschichtet (Titan‑Nitrid) Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Modellserie: Profi Line FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Profi Line Spiralbohrer (Typ N, SKU 41070‑FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusswerkstoffe, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze und kann auch Hartkunststoff bearbeiten. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, die kurze Ausführung wurde für den Einsatz auf Handbohrmaschine und stationären Maschinen konzipiert; durch die reduzierte Auskraglänge verbessert sich die Stabilität bei handgeführten Anwendungen. Warum ist die TIN‑Beschichtung vorteilhaft? Die TIN‑Beschichtung (Titan‑Nitrid) auf dem HSS‑G‑Bohrer reduziert Reibung und Wärmeentwicklung, verlängert die Standzeit und sorgt für geringeren Verschleiß bei wiederholten Bohrvorgängen. Welche Vorteile bringt der geschliffene HSS‑G‑Bohrer gegenüber gewalzten Bohrern? Geschliffene HSS‑G‑Bohrer bieten sehr scharfe Kanten und höhere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; sie sind deshalb besser für präzise Metallbearbeitung geeignet, erfordern aber vorsichtigen Einsatz wegen möglicher Sprödigkeit. Ist Kühlung beim Bohren erforderlich? Für anspruchsvolle Materialien und zur Maximierung der Lebensdauer der TIN‑Beschichtung wird die Nutzung eines geeigneten Kühlsystems empfohlen; das reduziert Reibung und verschleißbedingte Wärmeentwicklung.
7mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill (Twist Drill) – Ø 7 mm · 135° tip · HSS‑G · DIN 338 · with W‑point and triangular shank · Model: Spezial · Brand: MetavCUT The Twist Drill is a precision metal‑drilling tool for handheld and machine use, designed to deliver fast, centred holes in steels, non‑ferrous metals and engineering plastics. Rapid drilling performance with HSS‑G material 135° tip for cleaner entry in hard materials Triangular shank for secure grip in cordless drills Conforms to DIN 338 for short twist drills Special W‑point grind reduces required feed force Faster, cleaner holes in demanding materials The Twist Drill made from HSS‑G combines high cutting speed with good wear resistance, so drilling progress is noticeably quicker than with conventional HSS drills. The 135° tip angle is optimised for harder workpieces such as stainless steel and other tough alloys, meaning reduced wandering at the start and cleaner hole edges. For users this translates into less rework and more precise bores even under repetitive use. Efficient power transfer and easy handling with handheld tools The design with a triangular shank ensures a positive fit in chucks and quick torque transmission, ideal for use with a Drilling Machine or cordless hand drills. The integrated W‑point (multi‑bevel cutting edge) improves centring and reduces the required axial force, so less effort is needed during operation and the risk of drill deflection is lower. Professionals benefit from faster cycle times and safer handling on the job. Application range and target users This Spezial series Twist Drill is intended primarily for metalworking: alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. It is therefore particularly suitable for workshop technicians, toolmakers and maintenance teams who need a reliable general‑purpose metal drill. The robust geometry also makes it useful for occasional work in aluminium and wood where a durable, resharpenable drill is preferred. Standards, maintenance and technical advantages Manufactured to DIN 338, the short twist drill geometry ensures compatibility with industry expectations for short HSS drills with cylindrical or polygonal shanks. The HSS‑G substrate allows resharpening without significant loss of accuracy, extending tool life when compared to coated disposable types. A correctly reground W‑point preserves centring and chip evacuation, reducing heat build‑up and helping to maintain hole quality over repeated sharpening cycles. We recommend the MetavCUT Spezial Twist Drill for tradespeople and engineers who require fast, precise drilling in metals and engineering plastics; for further technical advice or to confirm suitability for a specific application please contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 55070-FDA Diameter: 7 mm Tip angle: 135° Material: HSS‑G Spiral length: 69 mm Overall length: 109 mm Shaft execution: with W‑point and triangular shank Model series: Spezial Norm: DIN 338 Application: Drills for metal For use with: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (Twist Drill) be used on? The MetavCUT Twist Drill is designed for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals, aluminium and hard plastics; its geometry and HSS‑G material also allow occasional use in wood where a resharpenable metal drill is acceptable. What are the three main drill types? The three main drill types are metal drills, wood drills and stone/concrete drills, each optimised in geometry and material for the specific substrate and cutting conditions.
7mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — 7 mm, 135° tip, long, bright finished, HSS‑G, DIN 340 The Twist Drill long HSS‑G 7 mm is built for deep metal drilling with a 135° tip, suited to hard materials and less accessible bore locations on a Drilling Machine. Long Twist Drill for deep, hard-to-reach holes HSS-G ground for faster drilling and precise holes 135° tip suited for hard materials like stainless steel Fully ground shank ensures high runout accuracy DIN 340 standard for long drill execution Faster deep drilling with reduced effort for workshop use Long execution according to DIN 340 offers clear practical benefits: the increased Spiral Length and overall length enable drilling into deeper workpieces or into recesses where standard bits fall short. Because the flute geometry is ground, the bit cuts with very sharp edges, which can result in up to 40% faster drilling and requires substantially lower feed pressure compared with conventional HSS bits. The practical effect is less operator fatigue, more consistent bore quality and a faster cycle time for repetitive metalworking tasks. Precise holes in hard materials thanks to HSS‑G and 135° tip A HSS‑G (ground high‑speed steel) blank combined with a 135° tip improves centring and reduces walking on harder substrates such as stainless steel. The ground geometry gives high Runout Accuracy and clean chip evacuation, producing more concentric and burr‑reduced holes. Users benefit from better repeatability and less post‑processing. Note that ground HSS bits can be more brittle than rolled types, so controlled feeds and appropriate coolant are advised to avoid chipping. Built for metalworking: materials and machine compatibility This long variant is intended primarily for metallic materials: alloyed and unalloyed steel, cast steels, grey and spheroidal cast iron, sintered iron, non‑ferrous metals and hard plastics. It is compatible with handheld Drilling Machines and bench drills when greater reach is needed. For drilling in steels up to the typical range of 900 N/mm² the geometry and tip angle help maintain performance while minimising chatter and deflection, delivering holes that meet machining tolerances in assembly and maintenance operations. Practical handling advice to extend service life and hole quality Because the flutes and cutting geometry are produced by grinding, re‑sharpening is straightforward and preserves cutting performance. For best results, use moderate cutting speeds, steady feed and regular cooling or lubrication to manage heat and chip formation. When drilling deep bores, peck drilling or intermittent withdrawal will improve chip evacuation and reduce risk of breakage. Store bits to avoid impact and inspect for wear before reuse to ensure continued precision. Strong recommendation: For demanding deep‑hole metal drilling choose the MetavCUT long HSS‑G Twist Drill for reliable performance; METAV Werkzeuge offers comprehensive technical advice and support — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 53070-FDA Durchmesser: 7 mm Spitzenwinkel: 135° Ausführung: long Gesamtlänge: 156 mm Spirallänge: 102 mm Farbe: bright finished Schaft Ausführung: fully ground Material: HSS-G Norm: DIN 340 Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is this Twist Drill suitable for? The MetavCUT Twist Drill long 7 mm is suitable for metalworking tasks where deeper or less accessible holes are required; the HSS‑G ground geometry and 135° tip make it especially effective for alloyed and unalloyed steels, cast materials and hard plastics. Which three drill types exist? There are three common drill categories: metal drill bits, wood drill bits and stone/concrete drill bits; the MetavCUT Twist Drill belongs to the metal drill bit family and is optimised for that application. What is a Twist Drill used for? A Twist Drill is principally used for machining high‑strength materials and larger bore diameters; its shape is easy to re‑grind and it endures higher loads while keeping a sharp cutting edge.
8,5mm Spiralbohrer, 118° Spitzenwinkel, HSS, rollgewalzt, Morsekegelschaft, 168mm Gesamtlänge - MetavCUT
Der rollgewalzte HSS-Spiralbohrer überzeugt durch Zähigkeit, Spitzenwinkel 118° und den sicheren Morsekegel-Schaft. Nutzen Sie die Kombination aus Bruchfestigkeit, maschineller Aufnahme und genormter Ausführung für zuverlässige Metallbohrungen. Bestellen Sie den Bohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer HSS mit Morsekegel von MetavCUT Der Spiralbohrer von MetavCUT eignet sich für präzise Metallbohrungen in Ständerbohrmaschinen und wirkt besonders bruchsicher durch rollgewalzte Fertigung Spiralbohrer von MetavCUT für Metallbohrungen Rollgewalzte HSS-Ausführung, bruchzäh und elastisch Morsekegel-Schaft für feste Kraftübertragung DIN 345 Norm, geeignet für Ständerbohrmaschinen Spitzenwinkel 118° für effizientes Eindringen Hohe Zähigkeit und Materialvorteile für robuste Bohrarbeiten Dank der rollgewalzten Fertigung ist der HSS-Bohrer besonders zäh und weniger bruchanfällig als geschliffene Varianten unter rauen Einsatzbedingungen. Diese Herstellung macht den Bohrer elastischer, was beim Bohren von kleinen Durchmessern das Bruchrisiko verringert. Der Einsatz von HSS bietet eine gute Kombination aus Härte und Zähigkeit für legierte und unlegierte Stähle sowie Nichteisenmetalle. Präzise Kraftübertragung durch Morsekegel-Schaft Der konische Morsekegel-Schaft sorgt für feste Selbsthemmung in der Aufnahme und ermöglicht eine sichere Übertragung hoher Drehmomente an der Ständerbohrmaschine. Dadurch reduziert sich das Risiko von Verrutschen und erhöht die Standzeit des Werkzeugs. Für Anwender mit stationärer Maschine bedeutet das weniger Nacharbeiten und konstantere Bohrergebnisse. Anwendungsempfehlung und Einsatzbereiche Dieser Spiralbohrer eignet sich für allgemeine Metallarbeiten in Werkstatt und Industrie, insbesondere für Stahl, Guss und Kunststoffe bis zu etwa 900 N/mm² Festigkeit. Mit einem Spitzenwinkel von 118° dringt der Bohrer leicht in weichere Materialien ein und bietet zuverlässige Zentrierung auf gewölbten Flächen. Für beste Ergebnisse bei höheren Durchmessern empfiehlt sich abgestuftes Vorbohren. Auswahlkriterien und Tipps für den Einsatz Wer Wert auf Alltagstauglichkeit legt, profitiert von der DIN 345-Norm und der Standard Line Ausführung von MetavCUT. Für sauberes Spanbild und längere Standzeit empfiehlt sich passende Kühlung bei zähen Materialien und ein Voranpunktieren bei hoher Präzision. Die Gesamtlänge und Spirallänge sind so gewählt, dass die Handhabung in stationären Maschinen komfortabel bleibt. Empfehlung: Für verlässliche Metallbohrungen empfiehlt MetavCUT den HSS-Spiralbohrer mit Morsekegel; Bestellanfragen über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 sind willkommen Produktmerkmale Artikelnummer: 54085-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Fakten Durchmesser: 8,5 mm Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Besonderheiten Ausführung: rollgewalzt — zäher, bruchsicherer Fertigungsprozess Material: HSS Schaft: Morsekegel — konischer Schaft mit Selbsthemmung, hohe Kraftübertragung Norm: DIN 345 Farbe: schwarz Anwendung: Bohrer für Metall Verpackungseinheit: 1 FAQ Für welche Materialien eignet sich der Bohrer am besten? Der Spiralbohrer von MetavCUT (SKU 54085-FDA) ist für legierte und unlegierte Stähle, Guss sowie Nichteisenmetalle und Kunststoffe geeignet und deckt typische Werkstattanforderungen zuverlässig ab. Welche Maschine ist für diesen Bohrer empfohlen? Empfohlen wird eine Ständerbohrmaschine mit Morsekegel-Aufnahme, da der konische Morsekegel-Schaft des MetavCUT-Bohrers eine feste, präzise Aufnahme und hohe Kraftübertragung ermöglicht. Ist der Bohrer geschliffen oder gewalzt? Die Ausführung ist rollgewalzt, was den Bohrer zäher und bruchsicherer macht und ihn besonders für normale Metallbohrarbeiten in Werkstatt und Montage prädestiniert. Wie tief kann mit dem Bohrer sicher gebohrt werden? Die effektive Nutzlänge wird durch die Spirallänge von 87 mm begrenzt; für besonders tiefe Löcher ist abgestuftes Aufbohren oder ein längerer Spezialbohrer empfehlenswert. Welche Rolle spielt der Spitzenwinkel 118°? Der Spitzenwinkel 118° erleichtert das Eindringen in weichere Materialien und verbessert die Zentrierung bei gewölbten Oberflächen, wodurch die Handhabung in vielen Alltagsanwendungen vereinfacht wird.
8.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
MetavCUT Twist Drill (Type N) — 8.1 mm · 118° tip · HSS · Short · Black · DIN 338 A MetavCUT Twist Drill (Type N) for precision metal drilling, designed as a short HSS drill for use with hand drilling machines. Short HSS construction for increased stability Precision 8.1 mm diameter for consistent hole quality 118° tip angle for reliable centring in metals Conforms to DIN 338 for standardised short twist drills Suitable for hand drilling machines and workshop use Stable, accurate holes for metalworking tasks The HSS material of this short twist drill offers a reliable balance of hardness and toughness for metalworking. Thanks to its short design, the tool exhibits reduced deflection and higher stability during drilling, which translates into more precise holes and less wear on the drill shank. This characteristic is particularly important when working with tougher materials or when drilling by hand, since a more rigid tool reduces the risk of wobble and off-centre bores. Cutting geometry optimised for clean starts and centring Equipped with a 118° tip and the classic Type N spiral, this twist drill provides predictable entry behaviour and good centring on a variety of metals. A 118° point angle reduces the initial cutting force and supports easier alignment on slightly curved or irregular surfaces. The combination of point geometry and the normal spiral pitch means the drill removes chips reliably while maintaining a controlled cutting action—an advantage for both manual drilling and machine use. Designed for workshop versatility and user convenience With a spiral length of 75 mm and an overall length of 117 mm, the short execution ensures compact handling and improved rigidity in confined setups. The MetavCUT Twist Drill is finished in black and manufactured to DIN 338 standards, making it a suitable choice for drilling alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics. The roll-walzen HSS production process yields an elastic drill that is easier to resharpen and reduces brittle fracture risk for smaller diameters. Choose the MetavCUT Twist Drill for workshop-grade metal drilling — METAV Werkzeuge offers expert technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) to help select the right tool for the task Technical data Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40081-FDA Durchmesser: 8.1 mm Spitzenwinkel: 118° Spirallänge: 75 mm Gesamtlänge: 117 mm Farbe: black Ausführung: short Typ: Type N Material: HSS Norm: DIN 338 Anwendung: Drills for metal Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (Type N) be used on? The MetavCUT Twist Drill Type N is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics; its HSS composition makes it versatile for a broad range of metal drilling tasks. Is the MetavCUT Twist Drill suitable for use with a hand drilling machine? Yes, the MetavCUT Twist Drill in short execution is designed for compatibility with hand drilling machines and offers improved rigidity and control during manual operation. For what is a Twist Drill used? A Twist Drill such as the MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger hole diameters. Its form allows for straightforward resharpening and it withstands greater loads. Which three drill types exist? The main categories are metal drills (like the MetavCUT Twist Drill), wood drills and stone/concrete drills. Why are Twist Drills sharpened at the point? The point sharpening reduces the cross‑cut at the tip of the twist drill; sharpening lowers friction forces and therefore requires less feed force while improving centring in the workpiece. Can a metal drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but it typically offers poorer guidance and a less clean finish compared with dedicated wood drills; however it is easier to resharpen and shows less self‑feeding tendency. At which drilling depths is the Twist Drill most commonly used? The Twist Drill is the most used tool for solid drilling. For diameters up to 20 mm and drilling depths up to 100 mm it is commonly employed for through‑holes and general metalwork. What is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to HSS is not always correct. When choosing between the two, assess whether working conditions justify a higher investment in HSSE for your specific applications.
8.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Als Fazit bietet dieser kurze Spiralbohrer eine Kombination aus HSS-E-Material, geschliffener Schaftgeometrie und einem 135° Spitzenwinkel für stabile, präzise Ergebnisse beim Bohren von Metall. Profitieren Sie von hoher Rundlaufgenauigkeit und reduziertem Bruchrisiko bei kleinen bis mittleren Bohrdurchmessern und bestellen Sie direkt über METAV Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 8,1 mm – kurz, HSS-E (MetavCUT) Der Spiralbohrer 8,1 mm ist ein kurzer HSS-E Metallbohrer für präzise Bohrungen in legierten und unlegierten Stählen sowie Gusseisen und Nichteisenmetallen. Kurz-Ausführung für höhere Stabilität Material HSS-E mit 5% Kobaltlegierung Geschliffener Zylinderschaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe DIN 338: kurze Spiralbohrer mit Zylinderschaft Kompakte Bauweise sorgt für bessere Präzision und weniger Vibrationen Die Kurz-Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren. Für Anwender bedeutet das weniger Ausschlag, sauberere Bohrlöcher und eine geringere Belastung des Bohrfutters. Besonders bei Arbeiten in Stahl oder Guss zeigt sich der Vorteil: die reduzierte Neigung zum Verbiegen führt zu gleichmäßigen Bohrbildern und reduziert Nacharbeiten. HSS-E und geschliffene Geometrie für saubere Schnitte und Langlebigkeit Das Material HSS-E mit 5% Kobalt bietet erhöhte Warmfestigkeit und Verschleißbeständigkeit, wodurch der Bohrer auch bei höheren Schnittgeschwindigkeiten standhält. Die geschliffene Ausführung sorgt für sehr scharfe Schneiden und exakten Rundlauf; das Ergebnis sind präzise, gratarme Bohrungen. Bei stationärer Nutzung empfiehlt sich Kühlen, da geschliffene Bohrer bei falscher Handhabung spröder reagieren können. Passende Anwendungen und empfohlene Einsatzbereiche Der Bohrer eignet sich für den typischen Werkstattalltag: Handwerk, Montage und industrielle Werkstätten profitieren von zuverlässigen Ergebnissen beim Bohren in Metall. Im Bereich 2,0 mm bis 13,0 mm ist diese Ausführung universell einsetzbar, sowohl in Handbohrmaschinen als auch in stationären Säulenbohrern. Für besonders präzise Passungen empfiehlt es sich, vorzuapern oder mit Zentrierbohrer anzupunkten. Sichere Anwendungstipps für lange Lebensdauer Für saubere Bohrbilder und geringes Werkstückwandlern sollten Drehzahl und Vorschub auf Material und Durchmesser abgestimmt werden; bei harten Werkstoffen ist der 135° Spitzenwinkel vorteilhaft. Vermeiden Sie tiefe Lochungen ohne Späneschnitt oder Kühlung, und nutzen Sie bei Bedarf mehrstufiges Aufbohren bei größeren Bohrungen. Die Packungseinheit erlaubt einfachen Austausch beim Verschleiß. Empfehlung: Für präzise Metallbohrungen die Kurz-Ausführung von MetavCUT wählen und bei Fragen unsere technische Beratung per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 47081-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten: Durchmesser: 8,1 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-E (Hochleistungs-Schnellarbeitsstahl, kobaltlegiert) Schaftausführung: geschliffen (CNC-Schliff für hohe Rundlaufgenauigkeit) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale, geeignet für Metall) Farbe: 5% kobaltlegiert FAQ Für welche Werkstoffe ist dieser Bohrer am besten geeignet? Der MetavCUT Spiralbohrer 8,1 mm aus HSS-E mit 5% Kobalt ist ideal für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; die Kombination aus Material und 135° Spitzenwinkel erlaubt sicheres Anbohren harter Werkstoffe. Eignet sich die kurze Ausführung für Handbohrmaschinen? Ja. Die Kurz-Ausführung des Spiralbohrers ist aufgrund der reduzierten Auskraglänge besonders stabil und eignet sich für den Einsatz in Handbohrmaschinen sowie in stationären Säulenbohrern. Wodurch unterscheidet sich die geschliffene Schaftausführung? Geschliffene Bohrer bieten sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, wie beim MetavCUT Spiralbohrer mit geschliffenem Zylinderschaft; das sorgt für präzise Bohrlöcher, erfordert aber angepasste Kühlung und vorsichtigen Vorschub. Brauche ich einen Zentrierbohrer vor dem Bohren mit diesem Durchmesser? Für höchste Maßhaltigkeit empfiehlt sich das Anpunkten mit einem Zentrierbohrer; für Standardanwendungen im Bereich 2,0–13,0 mm kann der Bohrer direkt verwendet werden, je nach Maschine und Materialbeschaffenheit. Was bedeutet die Norm DIN 338 für diesen Bohrer? DIN 338 klassifiziert kurze Spiralbohrer mit Zylinderschaft; beim vorliegenden MetavCUT Spiralbohrer garantiert die Norm die Ausführung als kurzer Spiralbohrer, geeignet für den stationären und mobilen Einsatz in metallbearbeitenden Anwendungen.
8.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, Ø 8.1 mm, 135° point angle, Bright finished, Short execution, DIN 338, HSS‑G (MetavCUT) A Twist Drill (Type N) designed for precise metal drilling on drilling machines and stationary machine tools. Short design for higher stability and precision HSS‑G fully ground for sharp, clean holes 135° point angle suited for hard materials like stainless steel Conforms to DIN 338 for short twist drills Short overall length reduces vibration and deflection Greater Stability and Faster Drilling for Metalwork The short design of this Twist Drill delivers increased Stability and reduced deflection when working with hard materials. Shorter overhang from the Chuck improves concentricity and lowers the risk of bending, which directly raises hole accuracy. In many industrial applications the HSS‑G ground geometry achieves up to 40% faster drilling and requires 50% less feed force compared with conventional HSS drills, so productivity improves while Operator fatigue decreases. Precise Tip Geometry for Tough Materials A 135° point angle optimises entry into hard and abrasion‑resistant metals by reducing the initial bite and spreading heat. For less experienced users: the point angle is the cone at the Drill Tip that influences how quickly the tool penetrates and how well it centres. With Type N normal spiral geometry this tool balances cutting speed and chip evacuation, making it particularly effective for Stainless Steel, Cast Iron and Alloyed Steels. Engineered Finish and Compliance for Reliable Results The fully ground flute and land geometry (HSS‑G) produce very sharp cutting edges and excellent Runout accuracy, yielding cleaner holes and longer life under correct conditions. The product conforms to DIN 338, which classifies short Twist Drills with cylindrical shanks and specifies manufacturing tolerances and execution variants. This standardisation supports reproducible setup and interchangeability in workshop environments. Recommended Use and Machine Compatibility Designed primarily for machining metal, this Twist Drill suits both stationary machine tools and drilling machines; it is most effective when used with appropriate cutting speeds, coolant and steady clamping. For hand‑held Drilling Machines take care with feed and torque limits because fully ground HSS drills can be more brittle than rolled variants; cooling and moderate speeds extend tool life. Typical applications include holes in unalloyed and alloyed steels, castings, sintered parts and hard plastics. Material Care and Maintenance Tips The HSS‑G material benefits from correct machining parameters: use steady coolant/lubrication for deep or high‑speed holes, and avoid excessive pecking without coolant to prevent heat build‑up. The fully ground geometry makes re‑sharpening straightforward for experienced toolmakers, while maintaining concentricity is essential to prevent premature breakage. For best performance, inspect the Twist Drill for wear and micro‑chipping before each critical operation. Strong recommendation: Choose the MetavCUT Twist Drill (Type N, HSS‑G) for demanding metal drilling tasks and contact METAV Werkzeuge for expert advice and application support — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 45081-FDA Diameter: 8.1 mm Point angle: 135° Type: Type N Colour: Bright finished Execution: Short Spiral length: 75 mm Total length: 117 mm Shank execution: Fully ground Material: HSS-G Standard: DIN 338 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for drilling metal; it excels in producing precise holes in alloyed and unalloyed steels, cast components and hard plastics when used on drilling machines or stationary machine tools. Can the MetavCUT Twist Drill be used in a hand drill? The MetavCUT Twist Drill can be used in a hand drilling machine with caution; due to its short, fully ground HSS design it performs best in well‑supported setups and benefits from controlled feed, cooling and firm clamping to avoid breakage. For what is a Twist Drill used? Twist Drills are mainly applied to machining high‑strength materials and larger diameters; their form is easy to re‑grind and they withstand greater loads, making them suitable for demanding metalwork. Which three drill types exist? There are three main drill types: Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills sharpened (pointed)? Sharpening reduces the cross‑cut at the tip, which lowers friction and the required feed force while improving the drill’s centring in the workpiece. Can you drill wood with a Twist Drill? Metal drills can be used in wood, but they offer poorer guidance and a less clean finish; however, they are easier to resharpen and have lower self‑feed tendencies. At which drilling depths is the Twist Drill most commonly used? Solid drilling is commonly executed with Twist Drills; they are most frequently the tool of choice for diameters up to 20 mm and drilling depths up to 100 mm. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect; choice should be based on the specific working conditions and whether those conditions justify the higher cost of HSSE.
8.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — Short HSS‑G Twist Drill (Ø 8.1 mm, 135° Tip, Type N, Bright Finished, DIN 338) The MetavCUT Twist Drill is a short Type N Twist Drill designed for precision metalworking, offering a bright finished surface and a 135° tip for improved entry into hard materials. Short HSS-G design for increased stability 8.1 mm diameter for precision metal drilling 135° tip for harder materials like stainless steel Fully ground shank for high concentricity Compliant with DIN 338 for short Twist Drills Stability and faster drilling for demanding metalwork Short design combined with HSS‑G grinding provides tangible advantages in daily workshop use. The reduced overhang reduces vibration and bending so that drilling stays precise even under higher loads. Because the Flute Geometry is CNC‑ground, the drill cuts with sharply defined edges; this results in up to 40% faster drilling and requires about 50% less thrust than comparable conventional HSS tools, which reduces operator fatigue and machine wear. Users benefit from cleaner holes and improved tool life when used with appropriate cooling. Reliable performance in hard and alloyed steels A 135° Tip reduces the tendency to wander on hard surfaces and shortens the initial drilling time for tougher materials such as Stainless Steel and alloyed Steels. As a Type N normal‑spiral Twist Drill, this tool is optimised for Metal applications and provides consistent chip evacuation under typical machining conditions. Compliance with DIN 338 ensures that dimensions and tolerances match workshop expectations for short Twist Drills, making the drill an efficient choice for production and repair tasks where reproducible results matter. Built for precision and concentricity The Fully Ground Shank and accurate manufacturing in the Profi Line series deliver high concentricity at the chuck. This construction minimises runout and produces rounder, more accurate holes when compared to rolled alternatives. For work on stationary or mobile machine tools, the short overall length improves rigidity and gives craftsmen more control during finishing and reaming operations. For those who recondition tools, the ground geometry is also simpler to resharpen while maintaining cutting accuracy. Practical guidance and application areas This Twist Drill has been developed primarily for drilling in a range of metals including alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The short flute length (Spiral Length 75 mm) and total length of 117 mm make it especially suitable for precision work on machine tools and hand drills where stability is essential. If unsure whether this drill meets a specific application, METAV Werkzeuge offers expert consultation to advise on performance, cooling strategy and feed rates. Why choose this short Profi Line Twist Drill Manufacturing choices such as the grinding process (HSS‑G) result in sharper cutting edges and superior running accuracy. That precision translates into fewer rejects, less rework and a measurable increase in productivity in workshop environments. For operators facing frequent drilling in harder materials, the combination of Short Design and 135° Tip delivers a practical balance of durability and cutting performance without sacrificing control. Strong recommendation: Choose the MetavCUT Profi Line Short Twist Drill for precision metal drilling and contact METAV Werkzeuge for tailored technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 48081-FDA Model Series: Profi Line Type: Typ N Diameter: 8.1 mm Spiral Length: 75 mm Overall Length: 117 mm Tip Angle: 135° Material: HSS-G Execution: short Shank Execution: fully ground Colour: bright finished For Drill Machine: Drilling Machine Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main advantage of a short Twist Drill like the MetavCUT Twist Drill? A short Twist Drill such as the MetavCUT Twist Drill offers greater stability and less tendency to bend, which improves precision when drilling hard materials; the reduced overhang also means cleaner holes and more consistent results on machine tools. Is the MetavCUT Twist Drill suitable for stainless steel and hardened material? Yes, the MetavCUT Twist Drill with its 135° Tip and HSS‑G geometry is particularly suited to harder Materials including Stainless Steel; the tip angle shortens entry time and the ground flutes maintain sharpness for effective cutting. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength materials and for larger drill diameters. The shape is easy to resharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three common drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the chisel edge at the tip of the Twist Drill. Pointing decreases friction forces, which lowers the required feed force and helps the drill to centre more reliably in the workpiece. Can a metal drill be used in wood? A Metal Drill can be used in Wood, but guidance is reduced and the hole finish is usually not as clean. Metal Drills are easier to resharpen and typically have less self‑feeding tendency than dedicated wood drills. For which drilling depths is the Twist Drill most commonly used? A through hole is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE is always superior to HSS is not universally correct. When choosing between HSS and HSSE, evaluate whether your working conditions justify the higher cost of HSSE.
8.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short, 8.25 mm, 118°, HSS, black (DIN 338) by MetavCUT The Twist Drill by MetavCUT is a short Type N metalworking drill bit designed for stable, precise boreholes in metals and suitable for use in drilling machines and hand drills. MetavCUT Twist Drill Type N for metal drilling 8.25 mm Diameter for precision holes 118° Point angle for fast centring Short execution for high stability Made from HSS per DIN 338 standard Precision and durability for metalworking applications The Twist Drill from MetavCUT combines a 8.25 mm diameter with a 118° tip geometry to deliver reliable entry and clean holes in a variety of metals. Manufactured from HSS (High Speed Steel), this short spiral drill offers a balance of hardness and elasticity, which reduces the risk of breakage when drilling smaller diameters and provides lasting edge retention under repeated loads. Compliance with DIN 338 ensures standardized dimensions and performance, so compatibility with typical chucks and machining fixtures is guaranteed. More stability and better control through a short design A short overall length and reduced protruding length increase stability and minimise wobble, which benefits precision work on tougher materials. The compact form reduces vibration and improves concentricity, making the drill ideal when accuracy matters and when working with portable Drilling Machines or bench-mounted equipment. Users benefit from easier handling, safer operation, and less tendency for the bit to deflect under sideways loads. Practical suitability and recommended uses This Type N Twist Drill is optimised for metalworking tasks: it is appropriate for alloyed and unalloyed steel, cast iron, non-ferrous metals and various plastics. The design supports both stationary Drilling Machines and suitable Hand Drills for robust workshop use. Professionals and advanced hobbyists who require dependable, repeatable results in mechanical, fabrication and maintenance contexts will find this short HSS drill a dependable choice. Material and tip geometry explained for confident selection HSS (High Speed Steel) provides elevated hot hardness and toughness compared with regular carbon steels, meaning the bit holds its edge under the heat generated by high RPM machining. The 118° Point angle favours faster centring and is typically chosen for softer to medium-hard materials; it also reduces thrust in the initial penetration. The Type N normal spiral geometry ensures efficient chip removal and general-purpose performance for metal drilling. For particularly hard alloys or specialised tasks, consider whether a different grade or coating would be advantageous. Choose the MetavCUT Twist Drill for reliable, precise metal drilling — for personalised technical advice or to confirm suitability for your exact application, contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 400825-FDA Diameter: 8.25 mm Point Angle: 118° Spiral Length: 75 mm Overall Length: 117 mm Execution: short Type: Type N Material: HSS Standard: DIN 338 Colour: black For: Drilling Machine (Hand drill) Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and drilling larger diameters in metalwork; its construction allows it to withstand higher loads and to be re-sharpened easily while maintaining performance. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill is suitable for use in a Hand Drill as well as in stationary Drilling Machines, though the short execution particularly improves stability and results when mounted in robust chucks or machine spindles. What are Twist Drills used for? Twist Drills such as this MetavCUT Type N are mainly applied to the machining of high-strength materials and larger bore diameters; their geometry makes them easy to re-grind and capable of withstanding substantial loads during metal drilling. Which three drill types exist? Common categories include Metal drills, Wood drills, and Stone/Concrete drills, where the MetavCUT Twist Drill belongs to the metal drill group. Why are Twist Drills sharpened (pointed)? The sharpening reduces the minor cutting edge at the tip, significantly lowering friction and therefore the required feed force; this also improves initial centring of the MetavCUT Twist Drill in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill can be used in wood, but the MetavCUT Type N metal drill provides less guidance and a less clean finish than a dedicated wood bit; however, it is easier to re-sharpen and shows less self-feeding tendency.
8.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Twist Drill, Diameter 8.25 mm, 135° tip, Type N, Bright finished, Fully ground shank, DIN 338 The Twist Drill short HSS‑G Type N is a compact metal‑drilling tool designed for precise work in hard materials, suitable for use in a Drilling Machine. Short design for higher rigidity and precision HSS‑G material for sharp, clean metal holes 135° tip for improved entry in hard materials Fully ground shank for excellent runout accuracy Compliant with DIN 338 for short twist drills Precision and stability for demanding metalwork The short HSS‑G Twist Drill from MetavCUT combines a reduced overhang with a robust geometry to deliver reliable concentricity and minimal deflection. Its short design reduces the unsupported length outside the chuck, which translates into higher stability and better hole accuracy when machining steels and other hard materials. For workshop and industrial applications where repeatable hole quality matters, this configuration helps maintain machining tolerances and reduces scrap rates. Faster penetration with lower feed force A HSS‑G (ground high speed steel) construction and a 135° tip angle optimise the cutting action for tougher metals, shortening the initial entry phase and lowering required thrust. The ground flute geometry provides sharp cutting edges that support faster drilling — the design enables up to around 40% faster progress and reduces required feed forces compared with conventional HSS variants, making the short drill particularly effective for alloyed and unalloyed steel, cast materials and hardened plastics. Explanation: ground (G) means the flutes are CNC‑ground rather than roll‑formed, yielding sharper edges and improved runout accuracy. Designed for metal, tailored to professional use As a Type N normal spiral, this short twist drill is engineered primarily for metalworking on stationary or portable Drilling Machines. Typical applications include drilling in steel, cast steel, cast iron, sintered iron and non‑ferrous metals. The fully ground shank supports precise clamping and is advantageous in production environments where high concentricity and repeatability are required. For less experienced users: Type N indicates a general‑purpose metal drill with a standard spiral suited to a wide range of ferrous materials. Norm conformity and manufacturing details that matter Compliance with DIN 338 identifies this tool as a short twist drill with a cylindrical shank produced to standardised dimensions and tolerances. The bright finished surface and the fully ground shaft contribute to predictable seating in chucks and collets. Because ground HSS variants can be more brittle than rolled types, cooling and controlled feeds are recommended for stationary operations to maximise tool life. The short length also reduces vibration, improving surface finish and hole roundness in high‑precision tasks. Strong recommendation: MetavCUT short HSS‑G Twist Drill for professional metal drilling — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge for competent consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 450825-FDA Typ: Type N Durchmesser: 8.25 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: short Schaft Ausführung: fully ground Farbe: bright finished Norm: DIN 338 Für Bohrmaschine: Drilling Machine Modellserie: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the ideal use of the Twist Drill by MetavCUT? The MetavCUT Twist Drill short HSS‑G is primarily used for machining high‑strength materials and larger drill diameters; its ground geometry makes it easy to regrind while withstanding greater loads, which suits heavy‑duty metalworking tasks. Which three drill types exist? When classifying common drills, there are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill category and is optimised for that purpose. Why are twist drills point‑sharpened? The point sharpening on a MetavCUT Twist Drill reduces the cross‑edge at the tip, which significantly lowers friction and therefore the required feed force, and it improves centring in the workpiece for more accurate starts. Can a Twist Drill for metal be used to drill wood? A MetavCUT metal Twist Drill can be used in wood, but it offers less guidance and a rougher finish than a purpose‑built wood drill; metal drills are easier to re‑sharpen and have less self‑feeding action. For which drilling depths is the Twist Drill commonly used? A through hole in solid material is typically made with a Twist Drill; for diameters up to around 20 mm and drilling depths up to about 100 mm, the short twist drill form is the most frequently used tool. Which is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to HSS is not universally correct. Evaluate working conditions to determine whether HSSE justifies a higher cost; MetavCUT recommends choosing material and coating based on specific machining demands.
8.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der Spiralbohrer kurz von MetavCUT verbindet hohe Stabilität durch die kurze Ausführung mit der Schnittfestigkeit von HSS und eignet sich besonders für präzise Metallbohrungen; bei Bedarf technische Beratung über Metav-Qualitätsfilter anfordern. Spiralbohrer kurz von MetavCUT (HSS, DIN 338) Der Spiralbohrer kurz von MetavCUT ist ein HSS-Kurzbohrer nach DIN 338 für präzise Metallbohrungen mit hoher Stabilität. Kurze Ausführung für bessere Stabilität und Präzision HSS-Material reduziert Bruchrisiko bei < 6 mm Bohrungen Typ N Normalspirale für Metallarbeiten Durchmesser 8,2 mm mit 118° Spitzenwinkel Packungseinheit 5 Stück, SKU 40082-FDA Stabilität und Präzision für Metallbearbeitung Die kurze Bauform sorgt für deutlich verminderte Auskragung und damit für höhere Stabilität beim Bohren von Metall. Durch die reduzierte Biegespannung ist die Spanabfuhr effizienter und die Wahrscheinlichkeit eines Bruchs sinkt. Anwender profitieren von gleichmäßigeren Bohrbildern und einer geringeren Nacharbeit, was die Effizienz in Werkstatt und Produktion erhöht. Materialwahl und Spitzenwinkel – warum HSS und 118° Das verwendete HSS (Schnellarbeitsstahl) bietet Elastizität und eine hohe Warmfestigkeit, wodurch sich das Bruchrisiko bei kleineren Durchmessern reduziert. Der gewählte Spitzenwinkel von 118° ist optimiert für allgemeine Metall- und Nichteisenbearbeitung und erleichtert das Anbohren ohne übermäßiges Auslaufen. Diese Kombination reduziert Werkzeugwechsel und steigert die Prozesssicherheit. Einsatzgebiet, Maschine und Anwendernutzen Der Bohrer ist für den Einsatz in Handbohrmaschine und stationären Bohrvorrichtungen vorgesehen und eignet sich besonders für Werkstatt, Montage und Instandsetzung. Anwender erhalten mit diesem Kurzbohrer eine Lösung für Anwendungen in legiertem und unlegiertem Stahl, Gusseisen sowie Kunststoffen, wobei die kurze Ausführung die Bedienbarkeit mit üblichen Bohrmaschinen verbessert. Handhabung, Vorbohren und Lebensdauer Bei größeren Anforderungen empfiehlt sich das Vorbohren zur Entlastung der Querschneide; bei einem Zieldurchmesser von 8,2 mm sorgt korrektes Vorbohren und angepasste Schnittgeschwindigkeit für verlängerte Lebensdauer. Regelmäßige Kühlschmierstoffzufuhr und kontrollierte Vorschubgeschwindigkeit minimieren thermische Belastung und erhalten die Schneidkante. Empfehlung: MetavCUT empfiehlt den HSS-kurzen Spiralbohrer als zuverlässige Lösung für präzise Metallbohrungen; bei Detailfragen oder Bedarf an technischen Daten wenden Sie sich bitte an info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 40082-FDA Marke: MetavCUT Ausführung: kurz Typ: Typ N Norm: DIN 338 Material: HSS Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 Fakten Durchmesser: 8,2 mm Spirallänge: 75 mm Gesamtlänge: 117 mm Spitzenwinkel: 118° Besonderheiten DIN 338: kurze Spiralbohrer mit Zylinderschaft HSS: Schnellarbeitsstahl, erhöht Elastizität und Warmfestigkeit Typ N: Normalspirale, klassischer Metallbohrer Kurz: reduzierte Auskragung für mehr Stabilität Farbe: schwarz FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer kurz aus HSS ist für viele Stahlarten geeignet, bei sehr harten Edelstahlqualitäten kann jedoch ein spezieller 135°-Bohrer oder ein Hartmetallwerkzeug sinnvoller sein; SKU 40082-FDA eignet sich insbesondere für allgemeine Stahl- und Gussarbeiten. Kann man den Bohrer in einer Handbohrmaschine verwenden? Ja, der Spiralbohrer kurz ist für Handbohrmaschine ausgelegt und bietet durch die kurze Auskragung höhere Stabilität, wodurch präzise Bohrungen auch mit mobilen Geräten möglich sind. Welche Vorteile hat die kurze Ausführung im Vergleich zu Standardlänge? Die kurze Ausführung reduziert das Verbiegen und verbessert die Rundlaufgenauigkeit, was die Bohrqualität erhöht und die Lebensdauer des Werkzeugs verlängert. Wie groß ist die Packungseinheit und eignet sich die Packung für Werkstattbedarf? Die Verpackungseinheit beträgt 5 Stück, ideal für Werkstattbedarf und Serienarbeiten, SKU 40082-FDA ermöglicht eine schnelle Wiederauffüllung von Verschleißteilen. Was bedeutet Typ N bei diesem Bohrer? Typ N steht für Normalspirale, die klassische Spiralform für Metallbohrungen; kombiniert mit HSS bietet sie eine Balance aus Stabilität und Schnittleistung für allgemeine Anwendungen.
8.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, 8.2 mm, 135° tip, 5% cobalt-alloyed, HSS‑E, DIN 338 (MetavCUT) A Twist Drill Type N short designed for precision metal drilling with Drilling Machines, offering enhanced stability and wear resistance for demanding workshop tasks. Short design for higher stability 5% cobalt-alloyed HSS‑E for heat resistance 8.2 mm diameter with 135° tip for hard metals Fully ground shank for accurate runout Conforms to DIN 338 for standardised quality Stable drilling in hard materials that reduces vibration and breakage The short design of this drill gives a reduced overhang and therefore higher stability during machining. With an 8.2 mm diameter and a spiral length of 75 mm, the geometry minimises bending forces when used in a Hand Drill or on stationary Drilling Machines. For operations in tougher materials the compact length helps to keep the tool steady, which reduces chatter and the risk of sudden breakage while improving hole accuracy and surface finish. Material choice and cutting geometry for longer tool life Made from HSS‑E and alloyed with 5% cobalt, the drill maintains cutting hardness and heat resistance at elevated temperatures. The 135° tip angle is optimised for penetrating hardened and stainless steels, shortening the initial piercing time and improving centring in the workpiece. The combination of material and geometry makes the tool suitable for alloys and cast iron while preserving cutting edges when proper cooling is applied. Precision manufacture: grinding, runout and compliance This item is produced as a fully ground (HSS‑G) short Twist Drill rather than roll‑formed, which results in very sharp cutting lips and high concentricity. The ground flutes and accurately ground shank improve runout and produce clean bore surfaces, especially important when drilling small diameters in metal. Conformity to DIN 338 ensures the dimensions and tolerances meet recognised standards for short cylindrical shank drills. Who benefits most: applications and working tips Engineers, toolroom technicians and advanced hobbyists working with metal will value the performance of this short Type N drill for precise tasks and for drilling up to depths compatible with a 75 mm spiral length. Use moderate speeds, appropriate cutting fluid and a steady feed to exploit the cobalt alloy’s heat resistance. If drilling non‑ferrous materials or wood, expect less guidance than with specialised wood drills; however the tool can still be used with care for multi‑purpose tasks. We recommend the MetavCUT Twist Drill Type N short for precision metalworking; for individual advice on feeds, speeds or tool selection contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 47082-FDA Diameter: 8.2 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Type: Type N Execution: short Shank execution: fully ground Material: HSS‑E Colour / Alloy: 5% cobalt‑alloyed Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill and where does it perform best? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength metals and for larger hole diameters in metalworking; its short design improves stability and precision when drilling steels, castings and non‑ferrous alloys. Which three drill types exist and how does this product fit in? There are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill group and is engineered for use in metalworking applications. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑edge at the tip of a Twist Drill, which lowers friction and the necessary feed force; this also improves centring so the tip starts the hole more accurately in the workpiece. Can a metal Twist Drill be used to drill wood? A Metal drill can be used in Wood, but the guidance is generally poorer and the hole finish may not be as clean; however metal drills are easier to resharpen and tend to have a lower self‑feeding tendency compared to specialised wood bits. For which hole depths is the Twist Drill most commonly used? A full bore into solid material is typically made with a Twist Drill; for diameters up to about 20 mm and drilling depths to around 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are always superior to standard HSS is not universally correct; selection should be based on working conditions and whether the additional cost of HSSE is justified for your specific application.
8.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, 8.2 mm, 135°, HSS‑G, Bright Finished, Fully Ground Shank, DIN 338 The Twist Drill Type N short is a precision metal‑drilling tool for Drilling Machines, offering an 8.2 mm diameter and a 135° tip for reliable penetration in hard materials. Twist Drill Type N, 8.2 mm, 135° tip Short design for higher stability and precision HSS‑G ground for fast drilling and clean holes Sized to machine drilling in metals per DIN 338 Bright finished with fully ground shank Short design increases accuracy and reduces vibration A shorter overall length combined with a reduced overhang provides noticeably higher stability during machining, which is particularly advantageous when working on tough alloys. The compact geometry lowers the tendency to bend or chatter, so operators achieve more consistent hole quality under load. For workshop set‑ups where rigidity matters, the short execution of this tool supports precise centring and smoother feeds. HSS‑G ground geometry for faster, cleaner holes in metal The HSS‑G (ground high‑speed steel) construction yields very sharp cutting edges and excellent roundness, enabling up to 40% faster drilling speeds with significantly reduced feed forces compared with conventional HSS. Combined with the 135° tip geometry, the tool is optimised for harder materials and reduces the risk of workpiece deformation while improving tool life when used with appropriate coolant. Fully ground shank and bright finish for reliable clamping A fully ground cylindrical shank ensures uniform clamping in chucks and holders, minimising run‑out and enhancing concentricity for deeper or repeated bores. The bright finished surface facilitates chip evacuation and inspection, while the compliance with DIN 338 confirms the tool class and dimensional tolerances expected in professional metalworking environments. Best suited for professional metalworking and demanding tasks Engineers and machinists who require robust performance in steel, castings and non‑ferrous metals will appreciate the balance of durability and precision offered by this Type N Twist Drill. The tool is designed primarily for machine drilling operations and excels where repeatable accuracy and clean bore edges are required, for example in toolrooms, maintenance shops and production lines. Choose the MetavCUT Twist Drill Type N short with HSS‑G grind for demanding metal applications — for expert advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45082-FDA Diameter: 8.2 mm Tip angle: 135° Type: Type N Material: HSS-G Execution: short Spiral length: 75 mm Total length: 117 mm Shank finish: fully ground Colour / Finish: bright finished Application: Drills for metal Model series: Standard Line Standard: DIN 338 Shaft execution: geschliffen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications is the Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking operations; it is particularly effective when machining steels, cast irons and other harder materials on Drilling Machines, offering stable performance for precision bores. Can the Twist Drill be used in portable drills? While the Twist Drill Type N is designed for machine drilling, it can be used in Handheld Drilling Machines for lighter tasks; however the short geometry shows its full advantages in rigid, machine‑mounted setups to maintain concentricity and hole quality. For what is Twist Drill used? The Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters. This shape is easy to regrind and withstands higher loads. Which 3 drill types exist? There are three principal drill types: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills pointed (regrinded)? Pointing reduces the web thickness at the tip of the Twist Drill. By pointing, frictional forces are substantially lowered so that smaller feed forces are required and the tip centres better in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood but typically gives poorer guidance and a less clean result. However, such drills are easier to resharpen and exhibit less aggressive self‑feeding.
8.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill – Short HSS‑G, Ø 8.2 mm, 135° (Type N), Bright Finished The Twist Drill is a short Type N HSS‑G drill designed for precision metalworking with Drilling Machines such as hand and stationary units, ideal where stability and clean holes are required. Short design for higher stability and precision HSS‑G fully ground for sharp, accurate holes 135° tip for hard materials like stainless steel Suitable for Drilling Machines and stationary use Conforms to DIN 338 for short twist drills High performance for demanding metal drilling Short HSS‑G geometry delivers a direct performance advantage: the short design reduces overhang and therefore deflection, improving hole accuracy under load. The fully ground cutting geometry enables up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS cutters, which is especially beneficial when working with alloyed and unalloyed Steel, Cast Iron, Sintered Iron or Hard Plastics. The 135° tip reduces walking on hard surfaces and shortens plunge time, so production cycles become more efficient while maintaining repeatable results. Precision manufacturing and what “fully ground” means for you A fully ground or HSS‑G tool is produced by CNC grinding rather than roll forming. This process yields very sharp cutting edges and high concentricity, leading to clean, precise bores and excellent roundness. Such advantages suit precision drillwork but also call for appropriate handling: ground drills can be more brittle than rolled types, so cooling and controlled feed are advised to prevent breakage and extend tool life. Compliance with DIN 338 ensures the drill matches the expected dimensions and tolerances for short twist drills with cylidrical shanks. Who benefits and where to use it Workshops, metal fabricators and maintenance engineers profit most from this short drill: it is tailored for operations requiring accurate holes in hard materials and where machine stability is limited. With a spiral length of 75 mm and an overall length of 117 mm combined with a Ø 8.2 mm core, the tool is particularly suited to drilling in confined setups or on compact Drilling Machines, where reduced overhang improves process reliability. The Type N normal spiral is the classic choice for metal applications, giving robust chip evacuation and general-purpose versatility. Practical handling tips for longer tool life To get the best from this Profi Line HSS‑G twist drill, use moderate cutting speeds for stainless and hard steels and ensure adequate coolant or lubrication during operation. Short drills tolerate higher feeds thanks to reduced bending moments, but avoid heavy side loads. If re‑sharpening is required, maintain the original 135° tip geometry to preserve centring behaviour and reduce thrust. Regular inspection for wear at the margin and lip relief keeps hole quality consistent and reduces scrap. Strong recommendation: Choose MetavCUT Profi Line short HSS‑G Twist Drills for precision metalworking and contact METAV Werkzeuge for tailored technical advice and application support — Email: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48082-FDA Type: Type N Diameter: 8.2 mm Point angle: 135° Material: HSS‑G Execution: Short Finish/Colour: Bright finished Shank finish: Fully ground Spiral length: 75 mm Overall length: 117 mm For Drilling Machine: Drilling Machine (Hand Drilling Machine) Norm: DIN 338 Model series: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The Twist Drill from MetavCUT (Type N) is mainly applied for machining high‑strength materials and larger drill diameters; its geometry and grinding make it suitable for demanding metalwork where clean, precise holes are required and where the tool must withstand higher loads. Which 3 drill types exist? Common basic categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill family and is optimized for metal applications. Why are twist drills pointed? The point grind on a MetavCUT Type N Twist Drill reduces the cross‑cut at the tip, which lowers friction so that less thrust is needed; additionally, a correctly ground tip improves centring and reduces walking on the workpiece. Can the Twist Drill be used for wood? A metal drill such as the MetavCUT Type N Twist Drill can be used in wood, but guidance and finish are usually inferior to dedicated wood drills; metal drills are easier to re‑sharpen and have lower self‑feeding tendency, yet they may not give as clean a hole as a wood‑specific bit.
8.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 8.3 mm, 118° tip, HSS, short, black, DIN 338 (MetavCUT) The Twist Drill (Type N) is a short HSS drill bit designed for precision metal drilling with Drilling Machines and workshop hand drills. Short HSS construction for greater stability Conforms to DIN 338 for consistent quality 8.3 mm diameter for standard metal drilling 118° tip for improved centring and faster entry Suitable for Drilling Machine and heavy-duty tasks Reliable stability and precision for metalworking The short HSS design and the reduced overhang provide noticeably higher stability when drilling into metal, reducing bending and chatter. As a Type N normal-spiral bit, this tool excels at creating clean, concentric holes in both unalloyed and alloyed steels; the shorter geometry also improves tool life under repeated loading. For workshop environments where repeatable accuracy matters, the compact length and robust construction translate directly into fewer rejected parts and less rework. Material advantages and tip geometry explained Manufactured from High Speed Steel (HSS) and adhering to DIN 338, the drill combines toughness and heat resistance for typical metalworking tasks. The 118° tip offers a balanced entry characteristic that aids centring on curved or slightly uneven surfaces while keeping cutting forces moderate. In practical terms, this means lower risk of walking at the start of a hole and smoother engagement when used with appropriate cutting speeds and lubrication. The short execution also simplifies regrinding and maintenance. Intended use and suitability for professionals Engineered for the demands of metal drilling, the bit is particularly suitable for production and maintenance tasks in workshops and industrial settings. With an effective spiral length of 75 mm and a total length of 117 mm, the geometry is optimised for machining tasks where rigidity is essential. Users such as fabricators, toolroom technicians and mechanical maintenance teams will value the combination of DIN 338 conformity and the roll-formed HSS production method that balances resilience and resharpenability. Choose the MetavCUT Twist Drill Type N for dependable metal drilling performance — for further technical guidance or to confirm suitability for a specific application contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40083-FDA Diameter: 8.3 mm Spiral length: 75 mm Total length: 117 mm Tip angle: 118° Execution: short Type: Type N Material: HSS Standard: DIN 338 Colour: black Suitable for: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is used primarily for drilling metal; it is designed to handle alloyed and unalloyed steels, cast iron, non-ferrous metals and certain plastics when appropriate speeds and coolant are applied. Why are Twist Drills sharpened and what benefit does that bring? The tip sharpening reduces the cross-cutting edge at the point of the Twist Drill, which significantly lowers friction and therefore the required feed force; a properly sharpened tip also improves centring and prolongs effective life during production runs. For what is a Twist Drill mainly applied? A Twist Drill is mainly applied to the machining of high-strength materials and large bore diameters; its form allows relatively easy resharpening and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? Commonly distinguished drill types include metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills category. Can a Twist Drill be used to drill wood? The metal Twist Drill can be used in wood, but guidance and finish are typically inferior to dedicated wood bits; metal bits may have worse guidance and a less clean hole, although they are easier to resharpen and have lower self-feeding tendency. At which drilling depths is the Twist Drill most commonly used? A through-hole (solid material) is commonly made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.
Reliable holemaking for every production environment
Metal drill bits, primarily classed as HSS drill bits, deliver process-secure, dimensionally accurate holes across a wide range of metallic materials. Designed for both hand-held drilling and CNC series production, these twist drills maintain cutting performance at elevated temperatures and provide the toughness required for industrial workshop and machining applications.
Why these drills matter in your workflow
The core function of metal drill bits is centred on efficient material removal with consistent hole geometry and repeatable centring. Their geometry and cutting-edge design reduce the need for rework, permit drilling without prior centre-punching on many surfaces, and ensure reliable chip evacuation. In practice, this means shorter cycle times on batch runs, safer setup for manual operations, and stable performance under the demands of production.
- Increased production uptime through predictable tool life and wear behaviour.
- Better first-pass quality thanks to optimised tip geometry and cross-point design.
- Versatile material capability: suitable for structural steels, cast irons and non-ferrous metals.
- Compatibility with hand drills, pillar drills and CNC machines for workshop-to-production scalability.
Benefits you can measure
- Reduced rework rates and improved hole tolerances.
- Longer intervals between tool changes when using HSS-Co 5 or HSS-Co 8 variants.
- Improved centring and reduced walking on smooth surfaces thanks to cross-point geometry.
- Flexibility across material classes from aluminium to hardened steels when selecting the appropriate grade.
Metav as your precision partner
Metav combines decades of industry expertise with a comprehensive range that democratises precision for workshops and procurement teams. From the logistics hub in Emmerich, Metav acts as a quality filter for the European market, supporting over 48,000 customers and stocking more than 250,000 products. For buyers seeking a single, reliable source for high-performance drill solutions, Metav offers consistent availability and a professionally curated selection of metal drill bits and related tooling.
Technical data at a glance
- material: high-speed steel (HSS)
- variant: rolled HSS-R; ground HSS-G; high-alloy HSS-E
- cobalt options: HSS-Co 5; HSS-Co 8
- suitable for: alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron, aluminium, copper, brass
- geometry: typical tip angles 118° and 135°; cross-point (split point) for reduced walking
- application environments: hand drilling, pillar drill, CNC machining
Compact and reliably engineered, these metal drill bits—also referred to as HSS drill bits or twist drills—form the backbone of precision drilling operations in industrial and workshop settings.
FAQ
What distinguishes HSS drill bits from cobalt variants?
HSS drill bits provide high toughness and good performance at elevated temperatures; HSS-Co 5 and HSS-Co 8 variants add cobalt for increased hot hardness and extended tool life when machining tougher or stainless steels.
Which materials can metal drill bits handle reliably?
Metal drill bits are suitable for alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron and non-ferrous metals such as aluminium, copper and brass, depending on the selected grade and geometry.
When should I choose ground HSS-G over rolled HSS-R?
Choose ground HSS-G for higher concentricity, better chip evacuation and longer service life in production; rolled HSS-R is a cost-effective option for standard workshop tasks.
How does tip geometry affect drilling performance?
Tip angles around 118° are common for general-purpose drilling, while 135° tips and cross-point designs improve penetration and reduce walking on harder or polished surfaces.
Can these drill bits be used on CNC machines?
Yes—metal drill bits are suitable for hand-held, pillar and CNC operations; selection of grade and geometry should match the machine capability and workpiece material.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com