Precision metal drills for reliable, high-performance holemaking
Precision metal drills, commonly supplied as HSS twist drills, are engineered to produce clean, dimensionally accurate cylindrical holes in materials such as alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron and non-ferrous metals like aluminium, copper and brass, delivering consistent results in both manual and CNC operations. Their high-speed steel construction provides exceptional toughness, elasticity and fracture resistance, while variants such as roll-formed HSS-R and ground HSS-G offer cost-effective general performance or enhanced runout accuracy and chip evacuation respectively, and HSS-E or HSS-Co types ensure superior hot hardness when machining stainless or highly alloyed steels. Optimised point geometries (typically 118° for softer steels and 135° for harder grades) combined with a cross grind reduce feed force, enable accurate centring and promote efficient chip removal, improving process reliability and prolonging tool life.
8.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G Twist Drill Ø 8.6 mm · 135° tip · Type N · Bright Finished · Fully Ground Shank · DIN 338 · MetavCUT Profi Line The Twist Drill short Type N is a precision drill for metalworking, designed for stable, accurate holes in hard and alloyed steels with its 135° tip. Short design for increased stability and precision HSS‑G ground for clean, accurate hole quality 135° tip optimised for hard and stainless steels Fully ground shank for excellent concentricity Complies with DIN 338 for short twist drills Greater Stability for Precise Metal Drilling This short Twist Drill delivers enhanced stability thanks to its reduced overhang and compact overall length. The short flute length reduces bending and vibration, which results in sharper, more concentric holes and longer tool life when used under appropriate conditions. For work on milling or drilling machines where rigidity matters, the compact design significantly improves repeatability and reduces the risk of wander in tough materials. Faster Cutting with Lower Feed Forces The specially ground HSS‑G geometry is engineered to cut more efficiently: the manufacturer reports up to 40% faster drilling and approximately 50% reduced feed force compared with conventional HSS variants. The 135° tip shortens initial bore time in harder metals and helps maintain the centre, while the ground cutting lips deliver a clean chip flow and reduced heat generation during operation. Built for Metalworking: Materials and Use Cases This Type N short twist drill is intended primarily for metal applications, including alloyed and unalloyed steels, cast steels, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its bright finished surface and fully ground shank make it particularly suitable for stationary and machine‑based drilling, where precision and surface quality of the hole are priorities. Typical users are toolrooms, metal workshops and maintenance departments requiring reliable performance in demanding materials. Precision Manufacturing and Practical Considerations Manufactured to DIN 338 standards, the drill is produced by grinding the flutes (HSS‑G), yielding very sharp cutting edges and excellent runout accuracy. The fully ground cylindrical shank ensures secure clamping and minimal runout in the chuck. Note that ground HSS drills can be comparatively brittle; for best results, use appropriate coolant, moderate speeds and the support of a rigid machine setup to avoid premature breakage. Highly recommended: Choose the MetavCUT short Twist Drill for demanding metalworking tasks — for technical questions or to confirm suitability for your application, contact METAV Werkzeuge for expert advice via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or on WhatsApp at +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48086-FDA Type: Type N (Normal spiral) Diameter: Ø 8.6 mm Spiral (flute) length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G (ground high‑speed steel) Shank: Fully ground (geschliffen) Finish: Bright finished Execution: Short (kurz) Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine (Handbohrmaschine) Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N machine reliably? The MetavCUT Twist Drill Type N is suitable for a wide range of metals, including alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics; its HSS‑G ground geometry is optimised for clean holes in demanding materials. For what is a Twist Drill used? A Twist Drill is primarily used for machining high‑strength materials and larger diameters; its form is easy to sharpen and it withstands considerable loads, which makes it a common choice for drilling in metal and other demanding applications. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills, each designed with geometries and materials matched to the intended workpiece.
8.75mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 8.75 mm, 118° point angle, short HSS, black, DIN 338 A Twist Drill Type N designed for precise metal drilling in drilling machines and hand drills. HSS short Twist Drill, DIN 338 compliant 8.75 mm Diameter with 118° point angle 125 mm Overall length for stable handling Type N normal spiral optimized for metal Black finish for improved surface protection Precision and durability for demanding metalworking This short HSS Twist Drill combines material toughness with a compact design to deliver reliable performance in metal applications. The HSS material provides high wear resistance and good elasticity, making the bit suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. The short design reduces overhang and therefore vibration, which results in precise holes and a lower tendency to wander during drilling. Stability and handling that improve machining accuracy The reduced exposed length and 125 mm overall length increase stiffness and control when using a drilling machine or hand drill. The 81 mm flute length evacuates chips efficiently while maintaining rigidity, enabling consistent results in moderate deep holes. This combination supports clean hole geometry and repeatable centering, which is particularly important for workshop and maintenance tasks. Designed to the DIN 338 short‑drill standard for industrial use Manufactured to DIN 338, this short Twist Drill meets common shop standards for short spiral drills with cylindrical shank. The Type N normal spiral offers a reliable helix geometry for metal cutting, while the 118° point angle supports good centering behavior and is versatile across many metal types. For harder materials such as stainless steel, a steeper angle may be preferred, but the 118° point here balances penetration and chip formation for broad use. Practical guidance and safe working tips When working with this Twist Drill in metal, use appropriate spindle speeds and cutting fluid to extend tool life and improve surface finish. Start with lower speeds for larger diameters and increase coolant flow for heat management. Because the bit is a short version, it is less prone to bending — a benefit when precision is required. For occasional sharpening, the normal spiral geometry of this bit allows easier regrinding while retaining performance. Strong recommendation: the MetavCUT Twist Drill Type N is ideal for precision metal drilling — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 400875-FDA Diameter: 8.75 mm Point angle: 118° Type: Type N Execution: short Material: HSS (High Speed Steel) Flute length: 81 mm Overall length: 125 mm Colour: black For drill: Drilling Machine / Hand Drill Standard: DIN 338 Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended for metalworking and is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics; its HSS composition provides the hardness and elasticity needed for these materials. For what is a Twist Drill mainly used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; its shape allows comparatively easy resharpening and it withstands higher loads, making it suitable for demanding metal drilling tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and stone/concrete drills, each designed with geometries and materials adapted to their specific applications.
8.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Bauweise, geschliffene HSS‑Geometrie und 135° Spitzenwinkel sorgen für stabile, präzise Bohrungen in harten Werkstoffen. Die kurze Ausführung reduziert die Auslenkung und ermöglicht schnelleres Bohren bei geringer Anpresskraft. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer kurz von MetavCUT, Typ N Der Spiralbohrer kurz eignet sich für präzise Metallbohrungen an stationären und handgeführten Maschinen und bietet hohe Stabilität bei harten Werkstoffen. HSS‑G geschliffen für hohe Schärfe und Rundlauf 135° Spitzenwinkel für harte Werkstoffe Kurze Ausführung erhöht Stabilität und Präzision Spirallänge 81 mm für sichere Spanabfuhr DIN 338 Norm für kurze Spiralbohrer Stabilität und Präzision bei drehenden Maschinen Die verkürzte Bauform reduziert die Auskraglänge und minimiert so Vibrationen und Verbiegen während des Bohrens. Dadurch entsteht eine höhere Stabilität, die besonders bei mittelgroßen Durchmessern spürbar ist. Der Einsatz einer Handbohrmaschine oder einer stationären Bohrmaschine wird durch die kompakte Länge erleichtert, was saubere Bohrbilder und verbesserte Rundlaufwerte zur Folge hat. Für Anwender bedeutet das weniger Nacharbeit und präzisere Passungen. Effizienz durch geschliffene HSS‑Geometrie und optimierten Spitzenwinkel Die geschliffene HSS‑G Geometrie liefert sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit. In Kombination mit dem 135° Spitzenwinkel dringt der Bohrer leichter in harte Materialien ein und reduziert das Ausbrechen an der Austrittskante. Technisch bewirkt das bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft gegenüber herkömmlichen HSS‑Bohrern, was die Produktivität in Werkstatt und Produktion erhöht. Vielfältige Einsatzgebiete und Praktische Hinweise Der Bohrer eignet sich für legierte und unlegierte Stähle, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe. Als Vertreter des Standard‑Bereichs ist er ideal für Werkstatt‑ und Montagearbeiten sowie für anspruchsvolle DIY‑Projekte. Bei hoher Präzision empfiehlt sich zuvor ein Zentrierbohrer, um ein Wandern des Bohrers zu vermeiden. Kühlung bei zähen Werkstoffen verlängert die Standzeit und sorgt für konstant gute Ergebnisse. Handhabung, Sicherheit und Lebensdauer Die geschliffene Herstellung verlangt umsichtiges Handling: Plötzliche Biegung soll vermieden werden, da geschliffene Werkzeuge spröder reagieren können. Für lange Standzeiten sind kontrollierte Schnittgeschwindigkeit, ausreichende Kühlung und eine stabile Werkzeugaufnahme empfehlenswert. Die Kombination aus kurzer Ausführung und geschliffener Spirale führt zu saubereren Bohrlöchern und reduziert Nacharbeit in der Fertigung. Kaufen Sie den Spiralbohrer von MetavCUT über Metav Werkzeuge und profitieren Sie von präziser Geometrie und robuster Anwendung; bei technischen Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 450875-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Typ: Typ N Norm: DIN 338 Daten Durchmesser: 8,75 mm Gesamtlänge: 125 mm Spirallänge: 81 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G — Schnellarbeitsstahl, geschliffen Schaftausführung: geschliffen — volle Schaftbearbeitung für hohen Rundlauf Ausführung: kurz — reduzierte Auskraglänge für erhöhte Stabilität Einsatzgebiet: legierter und unlegierter Stahl, Guss, Nichteisenmetalle, Hartkunststoff Spirallänge 81 mm — unterstützt sichere Spanabfuhr DIN 338 — Norm für kurze Spiralbohrer mit Zylinderschaft Typ N — Normalspirale, klassisch für Metallbearbeitung Farbe: blank — helle, glänzende Oberfläche Geeignet für: Handbohrmaschine und stationäre Bohrmaschinen FAQ Wie ist der Spiralbohrer für harte Werkstoffe ausgelegt? Der Spiralbohrer von MetavCUT ist mit HSS‑G geschliffen und einem 135° Spitzenwinkel ausgestattet, wodurch er sich besonders für harte Werkstoffe wie legierten Stahl und Gusseisen eignet und saubere Bohrlöcher erzeugt. Welche Maschinen sind für den Einsatz geeignet? Die kurze Ausführung wurde für den Einsatz an Handbohrmaschinen und stationären Bohrmaschinen entwickelt; bei Verwendung an mobilen Geräten sorgt die reduzierte Auskraglänge für mehr Stabilität und geringeres Verbiegen. Welche Vorteile bietet die geschliffene Ausführung gegenüber gewalzten Bohrern? Geschliffene Bohrer liefern schärfere Kanten und höhere Rundlaufgenauigkeit, was zu präziseren Bohrungen führt. Der Spiralbohrer MetavCUT als HSS‑G bietet diese Vorteile, verlangt jedoch schonendere Handhabung und Kühlung. Gibt es Empfehlungen zur Spanabfuhr und Kühlung? Dank der Spirallänge von 81 mm ist die Spanabfuhr verbessert; bei zähen oder dicken Werkstoffen empfiehlt sich zusätzliche Kühlung, um Werkzeugverschleiß zu reduzieren. Welche Norm und Typenbezeichnung hat der Bohrer? Der Bohrer entspricht der DIN 338 und wird als Typ N geführt, die Norm beschreibt kurze Spiralbohrer mit Zylinderschaft und die Typenbezeichnung steht für die Normalspirale für Metall.
8.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — 8.7 mm, 118° tip, short, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N is a short High Speed Steel drill bit designed for precise metal drilling with hand or drilling machines. Short design for increased stability and precision HSS material for metalworking durability 8.7 mm diameter for standard metal holes 118° tip angle for reliable centring Conforms to DIN 338 short twist drill specification Reliable rigidity for precision metalworking A short HSS twist drill with a Type N spiral offers clear benefits where accuracy matters. The reduced overhang and the 81 mm spiral length together with an overall length of 125 mm reduce deflection and vibration during drilling, resulting in cleaner holes and longer tool life. This geometry is particularly advantageous for workshop and maintenance tasks where repeatable hole quality is required. The roll-formed or ground cutting edges deliver consistent cutting behaviour across common ferrous and non-ferrous metals. Standardised design that supports consistent results Compliance with DIN 338 identifies this bit as a short twist drill with a cylindrical shank, engineered for machine and hand-tool use. The short format increases stability and makes the tool less prone to bending under load, which benefits precision fitting and assembly processes. Users benefit from predictable tool behaviour and easier tool handling when switching between similar machines, while manufacturers achieve repeatable hole tolerances as required in many metalworking applications. Practical compatibility and drilling behaviour The 118° tip angle helps the drill centre reliably on slightly contoured surfaces and reduces the tendency to wander during the initial contact. As a Type N bit, it is the classic geometry for metal drilling and is suited for alloyed and unalloyed steels, cast iron and many non-ferrous metals. The cylindrical shank enables secure clamping in standard chucks of both hand and drilling machines, and the short construction aids chip evacuation and cooling when used with appropriate cutting fluids. Who gains most from this short HSS bit Metalworkers, toolroom technicians and maintenance engineers will appreciate the combination of HSS toughness and the short format for tasks that require repeatable precision. The design reduces the risk of breakage during moderate feeds and supports efficient workshop workflows. Produced by MetavCUT, this bit is a reliable choice for industrial repairs, prototype shops and technical training environments where durability and consistent drilling performance are essential. We recommend the MetavCUT Type N short Twist Drill for precision metalwork — for personalised technical advice and application support please contact METAV Werkzeuge via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40087-FDA Diameter: 8.7 mm Tip angle: 118° Spiral length: 81 mm Overall length: 125 mm Execution: short Type: Type N Material: HSS (High Speed Steel) Colour: Black Suitable for: Hand Drill / Drilling Machine Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is primarily used for machining metal; it performs well on alloyed and unalloyed steels, cast iron and many non-ferrous metals where a short, stable drill is required for precise holes. Can the MetavCUT Twist Drill Type N be used with a hand drill? Yes, the MetavCUT Twist Drill Type N is suitable for both hand drills and machine drilling when clamped securely; its short form reduces bending and improves accuracy in handheld applications. For what is a Twist Drill used? A Twist Drill is mainly applied for machining high-strength materials and larger drill diameters. This shape is easy to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are there? The main categories are Metal drills, Wood drills and Stone/Concrete drills. Why are twist drills pointed? Pointing reduces the chisel edge at the tip, lowering friction and therefore requiring less feed force; it also improves centring of the drill tip in the workpiece. Can a twist drill be used to drill wood? A metal twist drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; metal bits are easier to re-sharpen and have less aggressive self-feed.
8.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Type N) — 8.7 mm, 135°, Short, 5% Cobalt‑Alloyed, HSS‑E, DIN 338 The Twist Drill (Type N) is a short HSS‑E metal drill designed for precise drilling in hard and alloyed steels using a Drilling Machine. Twist Drill Type N by MetavCUT 8.7 mm Diameter for precise metal holes 135° Tip for harder materials Short design improves stability and accuracy HSS‑E with 5% Cobalt for increased heat resistance Precision and Durability for Tough Metals Designed as a short Type N bit, this HSS‑E Twist Drill delivers high stability and reduced deflection thanks to its shorter overhang. The 5% cobalt alloy increases red‑hardness and thermal resistance, so heat buildup during high‑speed metal drilling is better tolerated, extending tool life. For users who require repeatable, clean holes in Alloyed Steel and Stainless Steel, the shorter geometry directly translates into improved hole quality and fewer rejects. Optimised Geometry for Clean, Accurate Holes With a 135° tip angle and a fully ground flute geometry, the tool enters harder materials with less walking and lower axial force. The grinding process creates sharp cutting edges and excellent concentricity, resulting in precise bores and smooth chip evacuation. For customers unfamiliar with cutting geometry: the larger tip angle reduces penetration aggressiveness and is recommended for harder workpieces such as stainless steels. Suited Use Cases and Who Benefits This short, Type N HSS‑E drill is particularly appropriate for machinists and professionals working on metal fabrication, maintenance, and toolmaking. The stable design makes it ideal for drilling on bench or column Drilling Machines where rigidity matters most. If occasional mobile hand‑drilling is needed, the bit still performs, but best results are achieved with a steady, well‑clamped setup. Standards, Manufacturing and Practical Advice Manufactured to DIN 338 and available in a fully ground shaft execution, the bit conforms to recognised short twist‑drill specifications for industrial use. Ground (HSS‑G) drills offer superior roundness and cutting precision compared to rolled counterparts, though they can be less tolerant of shock loads. For prolonged runs, use appropriate cutting fluid and moderate feed rates to maximise tool life and hole quality. MetavCUT recommends this short HSS‑E Twist Drill for demanding metalworking tasks — for expert guidance and application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke/Hersteller: MetavCUT SKU: 47087-FDA Typ: Type N Durchmesser: 8.7 mm Spitzenwinkel: 135° Ausführung: short Material: HSS‑E Farbe: 5% cobalt-alloyed Schaft Ausführung: fully ground Gesamtlänge: 125 mm Spirallänge: 81 mm Für Bohrmaschine: Drilling Machine Norm: DIN 338 Modellserie: Standard Line Anwendung: Drills for metal Verpackungseinheit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (Type N) from MetavCUT used for? The MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength materials and larger drill diameters; its short form is easier to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are there? Commonly, drill types are divided into Metal Drills, Wood Drills and Stone/Concrete Drills, and the MetavCUT Twist Drill (Type N) is the standard choice among metal drills.
8.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short HSS‑G, 8.7 mm, 135°, Bright Finished, DIN 338 The Twist Drill is a short Type N HSS‑G drill designed for precision metalworking in Drilling Machines, offering high stability and clean holes for demanding industrial applications. Short HSS‑G design for higher stability 8.7 mm diameter for precision metal drilling 135° point for hard materials like stainless steel Fully ground shank for high runout accuracy DIN 338 standard for consistent quality Improved stability and faster cutting for metalworking Short design increases rigidity: the short Twist Drill reduces overhang and resists bending, which improves positional accuracy during drilling. The HSS‑G (ground High Speed Steel) geometry enables significantly faster material removal — the manufacturer information cites up to 40% faster drilling with 50% less feed force compared with conventional HSS drills — which directly translates into shorter cycle times and lower operator effort when working with steels and other tough metals. Tip geometry tailored for harder materials A 135° point angle is specified to ease entry into hardened surfaces and to reduce chipping when drilling stainless and alloyed steels. For non‑specialists: a larger point angle flattens the tip, spreading cutting forces and reducing the tendency for the drill to "grab", so holes start cleaner and tool life improves under correct cooling and feed. The drill conforms to the Type N normal spiral profile, making it particularly suitable for metal applications rather than soft woods. Precise shank and manufacturing quality for consistent results The fully ground shank and ground flute geometry produce high concentricity and sharp cutting edges. Grinding (HSS‑G) rather than roll‑forming creates very sharp cutting lips and excellent roundness, which yields cleaner holes and better dimensional accuracy. Users should note that ground drills can be more brittle than rolled types and therefore benefit from using appropriate coolant and secure clamping in the machine. Intended applications and user recommendations Designed primarily as a Drill for Metal, this short Twist Drill excels in workshop and production environments where repeatable accuracy is required: toolrooms, maintenance departments and metal fabrication shops. The 8.7 mm size and 125 mm overall length make it well suited to standard drilling tasks on lathes and drilling machines, especially when drilling in alloyed or unalloyed steel, cast materials and hard plastics. For novice users, using moderate feed and coolant will extend tool life and maintain hole quality. For precision metalwork, choose the MetavCUT short HSS‑G Twist Drill — METAV Werkzeuge provides expert advice and ordering support: eMail info@metav-werkzeuge.com · Phone +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45087-FDA Diameter: 8.7 mm Spiral length: 81 mm Total length: 125 mm Point angle: 135° Type: Type N Execution: short Finish / Colour: bright finished Shank execution: fully ground Material: HSS-G Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Packaging unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; it is suitable for alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper castings, non‑ferrous metals and hard plastics. The short HSS‑G geometry supports precise drilling in harder materials when used with suitable coolant and machine setup. How does the 135° point angle affect drilling performance with the MetavCUT Twist Drill? A 135° point angle on the MetavCUT Twist Drill reduces initial penetration forces and improves centring on hard materials; this larger angle shortens the effective cutting time and helps prevent chipping at the entry, provided the drill is used with appropriate feed and cooling. For what is a Twist Drill mainly used? A Twist Drill is most commonly applied to the machining of high‑strength materials and larger hole diameters. It is easy to regrind and withstands higher loads, making it suitable for demanding metal drilling tasks. Which three drill types are there? There are three main drill families: Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for that purpose. Why are Twist Drills sharpened (pointed)? Pointing the tip reduces the cross‑cut at the drill’s tip, which lowers friction and consequently the required feed force; this also improves the drill’s ability to self‑centre in the workpiece for cleaner starts. Can a Twist Drill be used for drilling wood? A metal Twist Drill can be used in wood, but guidance and finish are typically inferior to a dedicated wood bit. Metal drills are easier to resharpen and have lower self‑feed, so they are usable in a pinch but do not give as clean results as wood‑specific bits. At which depths is the Twist Drill most used? Solid drilling is commonly executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect. When choosing between HSS and HSSE, evaluate whether the specific working conditions justify the higher cost of HSSE material.
8.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing Twist Drill — MetavCUT short Type N, 8.7 mm, 135°, HSS‑G, DIN 338, bright finished The Twist Drill is a short Type N HSS‑G drill designed for precise metalworking in drilling machines and hand drills, optimised for hard materials and industrial use. Short design for enhanced stability and accuracy HSS‑G material for sharp, long‑lasting edges 135° tip angle for hard materials and stainless steel Fully ground shank for high concentricity Conforms to DIN 338 for consistent quality Faster, more stable drilling in demanding metalwork A short, fully ground HSS‑G drill blank delivers a tangible productivity gain when machining metal. The reduced overhang improves rigidity, which means less vibration and cleaner holes even in tougher alloys. For shop floors and maintenance work where repeatable accuracy matters, this short configuration reduces the risk of runout and tool deflection, translating into fewer reworks and more consistent component fit. Optimised tip geometry for hard materials The 135° tip angle and Type N spiral geometry are chosen to reduce initial cutting forces and improve centring in metals such as alloyed and unalloyed steel. This makes the tool particularly effective when starting holes in stainless steel or cast components. The broader tip reduces the tendency to "grab" while the flute geometry efficiently evacuates chips, so feed rates can be maintained with lower thrust force. Built for professional applications and precise results Designed under DIN 338 as a short twist drill, this component suits stationary and portable drilling machines where precision counts. The combination of HSS‑G metallurgy and CNC grinding yields very sharp cutting edges and high concentricity, producing burr‑reduced holes. Use coolant for longer life during deep or continuous drilling to avoid thermal softening. Who benefits from this short twist drill This tool is aimed at machinists, toolroom technicians and maintenance engineers requiring reliable metal drilling performance. The robust construction and Type N cutting geometry make it suitable for a wide range of metals, including cast iron and non‑ferrous alloys. Where compact setup or limited reach reduces leverage, the short design supports steadier machining and repeatable tolerances. Practical handling and drilling recommendations For best results, clamp workpieces securely and select appropriate spindle speed for an 8.7 mm diameter HSS‑G drill in metal. Apply moderate feed to allow the cutting lips to engage and use coolant where possible to extend tool life. Re‑sharpening is feasible for ground drills but must be performed carefully to preserve geometry. The short flute length of 75 mm and overall length of 117 mm make this drill practical for most bench and machine setups. Strongly recommended: Choose MetavCUT when precision and stability are required — METAV Werkzeuge offers expert advice on matching this tool to your machining setup, including speed and coolant recommendations. For personal assistance contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com or by phone +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48087-FDA Type: Type N Diameter: 8.7 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Material: HSS‑G Shank finish: Fully ground Execution: Short Colour: Bright finished Application: Drills for metal Standard: DIN 338 Model series: Profi Line For drilling machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit this MetavCUT Type N short drill? The MetavCUT Twist Drill Type N is primarily used for metalworking and is suited to alloyed and unalloyed steels, cast iron, non‑ferrous metals and hard plastics; its short, rigid form and 135° tip make it especially effective for precise drilling in hard materials. Which three drill types exist and where does the MetavCUT Type N belong? There are three common drill categories: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N is a metal drill designed for professional machining of metals and belongs to the classic metal drill category.
8.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 8.8 mm, 118°, black, DIN 338 The Twist Drill is a short Type N HSS drill designed for precise metal drilling in workshop and industrial settings. Short HSS Type N for high stability 8.8 mm Diameter for precise metal holes 118° Point Angle for improved centring DIN 338 short design reduces bending Black finish for clear visibility in the chuck Short design that boosts stability and accuracy A short design according to DIN 338 reduces the unsupported length of the tool, which directly improves rigidity and lowers the risk of bending during drilling. This construction leads to more precise holes and longer tool life when working on metal parts. For tasks requiring tight tolerances, the compact geometry is particularly advantageous because it minimises vibration and preserves concentricity even under handheld or machine-fed conditions. High-speed steel core for reliable cutting performance Manufactured from HSS (High Speed Steel), the drill offers a balanced combination of toughness and heat resistance suitable for common metalworking tasks. HSS is easy to re-sharpen and maintains cutting performance on alloyed and unalloyed steels, cast iron, non-ferrous metals and many plastics. This material choice reduces the likelihood of breakage in smaller diameters and supports repeated sharpening during maintenance, making it a durable option for everyday workshop use. Optimised tip geometry for centring and chip evacuation The 118° point angle and classic Type N helix create a reliable starting behaviour on flat and slightly curved surfaces, improving initial centring without excessive walking. The standard flute geometry facilitates efficient chip removal while drilling through metal, which helps maintain cutting edges and reduces heat build-up. These features together make the drill particularly well suited to metalworking tasks that demand a clean entry and consistent hole quality. Designed for compatibility and straightforward handling With a diameter of 8.8 mm, a spiral length of 81 mm and a total length of 125 mm, this short HSS drill is compatible with a wide range of drilling machines and hand-held drills used in workshops. The Type N helix is the classic choice for metal drilling and pairs well with standard chucks. The black finish aids visibility in the chuck and protects surfaces during storage. Handling is simplified by the reduced overhang, which also contributes to safer operation and easier regrinding when required. Strong recommendation: For consistent results in metalworking choose the MetavCUT short HSS Twist Drill — technical advice and fitting support are available from METAV Werkzeuge; for personalised guidance email info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp +49 170 2837271 Key specifications for reliable workshop use Designation: Twist Drill Brand: MetavCUT SKU: 40088-FDA Type: Type N Diameter: 8.8 mm Point Angle: 118° Material: HSS (High Speed Steel) Execution: short Colour: black Spiral Length: 81 mm Total Length: 125 mm Application: Drills for metal Recommended machine: Drilling Machine / Hand Drill compatible Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the typical use of the Twist Drill from MetavCUT (Type N)? The MetavCUT Twist Drill Type N is primarily used for drilling in high-strength materials and for larger hole diameters in metals; its robust roll-rolled HSS construction makes it suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and plastics, while offering good resistance to breakage and straightforward re-sharpening. Which three drill types are commonly available? Common drill categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for steel and similar materials. Why are Twist Drills dressed (pointed)? Dressing the tip reduces the cross-cut at the peak of the Twist Drill, which significantly lowers friction so that less feed force is required; at the same time the dressed tip improves centring and reduces walking when starting the hole. Can the MetavCUT Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with a dedicated wood bit; the metal drill offers easier re-sharpening and less aggressive self-feeding, which may affect hole cleanliness. For which drilling depths is the Twist Drill most commonly used? The Twist Drill is typically used for through drilling where a cylindrical hole is produced by material removal; it is most common for diameters up to 20 mm and drilling depths up to around 100 mm, depending on the machine and setup. Is HSS better than HSSE? The general belief that HSSE steels are categorically superior to HSS is not always correct; the choice between HSS and HSSE should depend on actual working conditions, as HSSE may justify its higher cost only under specific demands.
8.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short HSS‑E, 8.8 mm, 135° Point Angle, 5% cobalt‑alloyed, DIN 338, Fully Ground A Twist Drill (Type N, short) designed for precision metal drilling with improved stiffness and suitability for hard materials. Short Design for higher drilling stability HSS‑E Material with 5% Cobalt for wear resistance 135° Point Angle for hard and stainless steels Fully Ground shank for excellent runout accuracy Conforms to DIN 338 for short twist drills Higher stability for precise metal drilling The short execution provides a Short Design that reduces the cantilever length and significantly lowers deflection during operation. This means the bit delivers straighter holes and improved positional accuracy when used in a Drilling Machine or bench setup. For precision work in metal, reduced vibration translates into fewer rejects and faster downstream operations. Durable HSS‑E composition for tough applications Made from HSS‑E with 5% Cobalt, the drill retains hardness at elevated temperatures and resists wear when cutting alloyed steels. Cobalt‑alloyed high‑speed steel improves tool life and allows more aggressive cutting parameters on harder materials. This blend is advantageous when drilling stainless steel or other demanding metals where conventional HSS would wear prematurely. Geometry optimised for hard materials and centering A 135° Point Angle and Type N normal spiral geometry favour slower entry but superior centring and lower axial forces in hard materials. The geometry reduces chipping at the tip and helps maintain hole quality in thicker or tougher workpieces. For users unfamiliar: the point angle controls penetration and centring, with 135° commonly chosen for steels and stainless applications. Fully ground shank and conformity to DIN 338 The bit is Fully Ground, meaning the flutes and geometry are created by CNC grinding rather than rolling, resulting in sharper cutting edges and high concentricity. The product conforms to DIN 338 for short twist drills, ensuring consistent dimensions and interchangeability with standard toolholders. Users benefit from predictable fit and performance in professional shop environments. Intended applications and recommended use This short Type N twist drill is primarily specified for Drilling for Metal and is suitable for alloyed and unalloyed steel, cast iron, Non‑Ferrous Metals and Plastics under appropriate speeds and lubrication. Its shorter overall length increases stability for handheld or stationary machining. For best results, use cutting fluid and moderate spindle speeds; cooling reduces heat build‑up and extends tool life. Choose MetavCUT short twist drills for demanding metalwork and contact METAV Werkzeuge for personalised technical advice via eMail: info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Specifications for accurate selection Twist Drill Brand: MetavCUT SKU: 47088-FDA Type: Typ N / Type N Diameter: 8.8 mm Overall Length: 125 mm Spiral Length: 81 mm Point Angle: 135° Execution: short Shaft Execution: fully ground Material: HSS‑E Composition: 5% cobalt‑alloyed For Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Standard: DIN 338 Colour: 5% cobalt‑alloyed Manufacturer: MetavCUT Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is mainly applied to the machining of high‑strength materials and larger drill diameters; its short form is easier to regrind and withstands greater loads, making it suitable for demanding metalwork where tool robustness and reusability are important. Which three drill types exist? Regarding drill families, common categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill group and is optimised for metalworking applications.
8.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS-G, Ø 8.8 mm, 135°, Type N, Bright Finished, DIN 338 A short Twist Drill Type N for Drilling Machine use, designed for precise metal drilling in demanding industrial and workshop applications. Short design for higher drilling stability HSS-G ground geometry for clean, precise holes 135° tip for hard and stainless materials Fully ground shank for excellent concentricity Conforms to DIN 338 for reliable interchangeability Faster, more reliable metal drilling for tough materials The short HSS-G construction delivers a direct benefit: significantly reduced tendency to bend or whip during use, which translates into more precise holes and longer tool life under proper conditions. The 135° tip angle is optimised for harder metals and stainless steels, shortening the pilot time and improving centring on difficult surfaces. As a Type N normal-spiral geometry, this design balances chip evacuation and cutting action for typical metalworking tasks while allowing stable performance on stationary and mobile machines. Stability and handling that improve machining results A reduced overhang and the shortened overall length mean less vibration and better runout behaviour on the spindle; this yields cleaner hole edges and reduces rework. The fully ground shank guarantees improved concentricity in the chuck, so tolerances remain tight even during series production. With a diameter of 8.8 mm, a spiral length of 81 mm and an overall length of 125 mm, the tool is tailored for tasks where a compact, rigid drill bit is required to maintain accuracy in metals such as alloyed and unalloyed steels, cast steel and non-ferrous metals. Who benefits and how to choose the right drill Workshop professionals, toolmakers and maintenance technicians gain most from a short, ground HSS tool when precision and repeatability matter. The combination of HSS-G material and the short format reduces the required feed force and can increase drilling speed in appropriate conditions. For applications involving Sintereisen or Temperguss, the recommended approach is to use cutting fluid and moderate cutting parameters to exploit the drill’s performance without risking premature wear. Understanding the key specifications and safe use DIN 338 classifies short twist drills with cylindrical shank made from high-speed steel; in this case the designation indicates a ground geometry (HSS-G), produced by grinding rather than rolling. Ground drills typically achieve sharper cutting edges and higher runout precision, but they require careful handling because they can be more brittle than rolled variants. For best results, use appropriate coolant, clamp the tool securely, and keep overhangs minimal. These measures reduce heat and extend service life while ensuring consistent hole quality. Sustainability, service and after-sales support MetavCUT manufactures this short twist drill to industrial standards and METAV Werkzeuge as the vendor provides comprehensive technical consultation. If there is any uncertainty about material suitability, machining parameters, or alternative tool geometries, METAV Werkzeuge offers expert guidance and tailored recommendations to match specific workshop requirements. For precision metalworking choose the MetavCUT short HSS-G Twist Drill Type N for improved stability and hole quality — METAV Werkzeuge provides professional consultation at info@metav-werkzeuge.com or +49 2822 7131930 and via WhatsApp at +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 45088-FDA Type: Typ N Diameter: 8.8 mm Spiral length: 81 mm Overall length: 125 mm Point angle: 135° Material: HSS-G (ground high-speed steel) Finish / Colour: Bright finished Shank execution: Fully ground Execution: Short Standard: DIN 338 For use in: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suited to? The MetavCUT Twist Drill Type N is primarily used for metalworking; it is especially suitable for alloyed and unalloyed steel, cast steel, gusseisen and other hard materials. Its short, ground HSS construction provides improved stability and cleaner holes when used with appropriate machine settings and coolant. How does the short format of this Twist Drill affect drilling performance? A short design reduces the overhang and increases stiffness, which lowers vibration and improves concentricity. For the MetavCUT short Twist Drill this means better hole quality and the ability to operate at higher effective cutting speeds with lower feed force compared to longer equivalents. For what is a Twist Drill mainly used? A Twist Drill is mainly applied in the machining of high-strength workpieces and larger drill diameters. Its geometry is relatively easy to regrind and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three primary drill categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills pointed? Pointing reduces the cross-edge at the tip of the Twist Drill, which significantly lowers friction and thus requires less feed force. At the same time the pointed geometry improves centring in the workpiece for more accurate drilling. Can a Twist Drill be used to drill wood? A metal Twist Drill such as the MetavCUT HSS-G can be used in wood, but it offers poorer guidance and a less clean finish than a dedicated wood drill. It is easier to resharpen and has less self-feeding tendency than specialised wood drills. For which drilling depths is the Twist Drill the most used tool? Solid drilling is commonly performed with Twist Drills. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE steels are inherently superior to standard HSS is not universally correct. The decision should be based on the specific working conditions and whether the performance benefits justify the higher acquisition cost.
8.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill short HSS-G Type N — Ø 8.8 mm, 135° tip, Bright Finished, DIN 338 The Twist Drill short HSS-G Type N is a precision metal‑drilling tool designed for use in Drilling Machines, offering high stability and fast cutting performance for hard materials. Short design for improved stability Ø 8.8 mm for precise metal holes 135° tip for hard materials like stainless steel HSS‑G fully ground for sharp cutting edges Conforms to DIN 338 for consistent accuracy Faster, cleaner metal drilling with measurable efficiency The short Twist Drill from MetavCUT combines a compact geometry with a HSS‑G ground flute to deliver up to 40% faster drilling and 50% less feed force compared with conventional HSS variants. This efficiency reduces operator effort and machine load, making the tool particularly advantageous for repetitive metalworking tasks. The reduced overhang lowers vibration and increases Precision, resulting in cleaner hole walls and less burr formation. Reliable performance in hard and alloyed metals Designed as a Type N normal‑spiral drill, this short twist drill is optimised for a wide range of metallic materials: legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle and hard plastics. The 135° tip angle shortens entry time and improves centring in tougher workpieces, so fewer dwell corrections are needed. For users with limited experience, this means more consistent results when working with challenging materials. Precision geometry and fabrication for professional results The tool is manufactured according to DIN 338 as a short twist drill with a cylindrical shank. The fully ground flute geometry (HSS‑G) ensures razor‑sharp cutting edges and excellent runout accuracy, which benefits machining centres and manual setups alike. Ground drills deliver very clean holes and high repeatability; however, they require appropriate coolant and controlled feed to avoid chipping under heavy intermittent loads. Compact design that expands machine compatibility With a spiral length of 75 mm and overall length of 117 mm, the short execution reduces cantilever and enhances stability in the chuck. This compactness makes the drill well suited for use in Drilling Machines where rigidity and minimal deflection are critical. The bright finished surface aids chip evacuation and inspection, while the cylindrical shank fits standard chucks reliably. Practical guidance for safe and effective use When working with harder alloys, prefer moderate speeds and steady feed to leverage the 135° geometry. Use cutting fluid for prolonged tool life and improved surface finish. The short design is ideal for setups where overhang must be minimised; for very deep holes beyond the spiral length, choose an appropriately longer tool. For specific machining parameters or support with selection, METAV Werkzeuge offers comprehensive advice and technical consultation. Strong recommendation: For precise metalworking choose the MetavCUT short HSS‑G Twist Drill Type N for its superior stability and cutting efficiency — for technical questions or personalised advice contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48088-FDA Type: Type N Diameter: 8.8 mm Tip angle: 135° Material: HSS-G Norm: DIN 338 Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Colour/Finish: bright finished Application: Drills for metal Model series: Profi Line For Drilling Machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which tasks suit the MetavCUT Twist Drill short HSS‑G Type N best? The MetavCUT Twist Drill short HSS‑G Type N is mainly applied to the machining of high‑strength materials and larger drill diameters; its short form is easy to regrind and withstands higher loads, making it especially suitable for precise metalworking and demanding industrial applications. Which three drill types are commonly available? The three principal drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for drilling in a variety of metals.
8.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS Ø 8.9 mm, 118° tip, black, DIN 338, short design The Twist Drill Type N short HSS is a metalworking bit designed for precise drilling in metals with hand drills and drilling machines, offering a stable short shank and a 118° tip for efficient penetration. Short design for increased stability HSS construction for reliable metal drilling 118° tip for easier penetration in softer metals DIN 338 standard for short twist drills Compatible with hand drills and drilling machines Precision and stability for demanding metalwork The short Type N geometry delivers high stability and reduced run-out during operation, which directly benefits hole accuracy. With a Ø 8.9 mm cutting diameter and a total length of 125 mm, this short twist drill minimises bending and chatter when used in both portable and benchtop drilling equipment. The compact spiral length of 81 mm concentrates rigidity where it matters, enabling consistent hole diameter and a cleaner finish even under higher cutting loads. Durable HSS material for extended tool life Made from HSS (High Speed Steel), the bit combines hardness and toughness for prolonged service life in a wide range of metals. The material choice supports drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, while still allowing straightforward resharpening when required. For users this means fewer tool changes, predictable wear behaviour and reliable performance in routine workshop and maintenance tasks. Practical use cases and who benefits most Designed for professional workshops, maintenance teams and skilled hobbyists, the MetavCUT short twist drill is ideal where precision and repeatability are required. The Type N spiral is optimised for metallic materials, and the black finish improves visibility during setup. If you are unsure whether the bit suits a specific machine or material, METAV Werkzeuge offers detailed advice and technical support — contact via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Standards, tip geometry and application guidance Conforming to DIN 338 as a short twist drill ensures consistent dimensions and manufacturing quality across batches. The 118° tip angle favours entry and centring in softer metals and related tasks, while the classic Type N flute geometry balances chip evacuation and cutting action. For harder stainless steels or very abrasive materials, consider a flatter tip angle or a coated variant; for standard steel work, this short HSS bit provides an effective combination of penetration and rigidity. Strong recommendation: Opt for the MetavCUT Twist Drill Type N short HSS for precise metal drilling — expert consultation and ordering support are available from METAV Werkzeuge at info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40089-FDA Diameter: 8.9 mm Tip angle: 118° Spiral length: 81 mm Total length: 125 mm Type: Type N Material: HSS Execution: short Colour: black Suitable for: Drilling Machine / Hand drills Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill are primarily used for machining high-strength materials and larger drill diameters; their form is easy to resharpen and they withstand considerable loads, making them suitable for demanding metalworking tasks. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills group and is designed accordingly. Why are twist drills tipped? The tip sharpening reduces the cross-cut at the drill point, which lowers friction and therefore reduces the required feed force; this also improves centring of the MetavCUT Twist Drill during the initial entry into the workpiece. Can a Twist Drill be used to drill wood? A metal drill like the MetavCUT Twist Drill can be used in wood, but guidance and finish are usually inferior compared with a dedicated wood bit; metal drills are easier to resharpen and show less self-feed, which can be an advantage in some manual operations.
8.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 8.9 mm, 135° point, short HSS‑E, 5% cobalt‑alloyed, fully ground shank, DIN 338, MetavCUT The Twist Drill is a short Type N drill designed for precision metalworking, offering high stability and improved penetration for harder materials thanks to its 135° point angle. Short design for improved stability 8.9 mm Diameter for common metal holes 135° Point Angle for harder materials HSS‑E with 5% cobalt for heat resistance Fully ground shank for high runout accuracy Precision and stability for metalworking that matters This short, purpose‑built cutter delivers stability where long overhangs would cause deflection. The reduced overall length and shorter projection reduce bending and vibration during drilling, which directly improves hole accuracy and prolongs tool life. For workshop operations and portable drilling machines, this geometry supports fast, straight entries into Steel and other metals, translating to fewer rejected parts and less rework. Durable material for demanding conditions Manufactured from HSS‑E with 5% cobalt, the tool resists heat and wear significantly better than standard HSS. That makes it suitable for sustained drilling in alloyed and unalloyed Steel, Cast Iron and Non‑Ferrous Metals. The cobalt content increases red hardness, so the cutter maintains cutting edges at higher temperatures; the direct user benefit is longer service life and fewer tool changes when machining tougher materials. Geometry optimised for harder workpieces The 135° point angle is chosen to ease engagement with harder materials and to reduce chatter on difficult surfaces. A wider point angle shortens the initial entry time and decreases the tendency of the tip to wander, which is particularly helpful on stainless Steel and high‑strength alloys. The "Type N" normal helix fluting provides a balance between chip evacuation and cutting stability for metalworking tasks. Ground flute finish and norm conformity for precise holes Being fully ground (HSS‑G style) yields sharp cutting lips and very good concentricity, resulting in clean, burr‑reduced holes with excellent surface finish. Conformance to DIN 338 ensures consistent dimensions and interchangeability, which benefits production runs and tool inventories. For users who value repeatable quality, this specification simplifies planning and tool management in professional shops. Intended use and target users Designed for machinists, maintenance teams and metalworking professionals, this short twist drill excels where precision counts and materials are tough. It suits both stationary machines and hand‑held drilling machines where a compact, stiff tool is needed. The result is reliable performance in fabrication, repair, and assembly environments where reproducible hole quality reduces secondary operations. We recommend MetavCUT’s precision HSS‑E short twist drill for demanding metal applications; for personalised technical advice or if you are unsure this tool meets your requirements, contact METAV Werkzeuge for competent consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 47089-FDA Diameter: 8.9 mm Total length: 125 mm Spiral length: 81 mm Point angle: 135° Type: Type N Execution: Short Colour: 5% cobalt‑alloyed Shank execution: Fully ground Material: HSS‑E Standard: DIN 338 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its short form and robust design make it particularly suitable for precise drilling in Steel and other metals. This form is easy to re‑grind and withstands higher loads, which supports longer life under demanding conditions. Which 3 drill types exist? When considering the MetavCUT Twist Drill (Type N), the three main drill categories to know are Metal drills, Wood drills, and Stone/Concrete drills. Each category is optimised for different materials and geometry, so selecting the correct drill type ensures better results and tool life.
8.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Short Type N 8.9 mm | 135° | HSS-G | Bright Finished | DIN 338 The Twist Drill Short Type N is a precision metalworking drill for Drilling Machines, designed for stable and accurate machining of hard materials. Short design for higher stability 135° point angle for hard materials HSS‑G fully ground for precise holes Complies with DIN 338 for short drills Suitable for use in Drilling Machine applications Durable HSS‑G construction for reliable machining Equipped with HSS‑G material, this Twist Drill delivers consistent cutting performance when working with alloyed and unalloyed steels. The fully ground geometry produces sharp cutting edges and high concentricity, which results in clean, burr‑reduced holes and extended tool life under correct cooling. Because the flute geometry is produced by CNC grinding rather than rolling, users benefit from superior roundness and repeatable accuracy that is particularly useful in demanding metalworking environments. Short overall length for enhanced stability and accuracy Thanks to its Short Design, the drill offers reduced overhang from the chuck, lowering the tendency to deflect and improving concentricity when drilling in tougher materials. This results in higher feed control and better hole quality, especially on bench and floor Drilling Machines. When precision counts, the shorter projection enables operators to apply lower lateral forces and maintain tighter tolerances, making the tool ideal for repetitive, high‑precision metalworking tasks. Optimised geometry for hard materials and faster drilling With a 135° Point Angle, the Twist Drill penetrates harder workpieces such as stainless steel more efficiently than standard angles, reducing the initial skidding and improving centring. The ground cutting lips and polished flutes support faster chip evacuation and allow up to 40% quicker drilling rates under suitable conditions, while requiring significantly lower feed force compared with conventional HSS drills. This geometry is particularly effective for applications where reduced entry burr and consistent hole form are priorities. Conformance, application and user guidance Manufactured to DIN 338, this Short Twist Drill Type N is specified for metalworking tasks on rotating stationary or portable machines. It is intended primarily for drilling metallic materials including cast iron, sintered iron, non‑ferrous metals and hard plastics, and is not optimised for very soft timbers. For best results, use appropriate cutting speed, steady coolant supply and a stable clamping setup to exploit the drill’s high concentricity and edge sharpness. Strong recommendation: Choose MetavCUT Twist Drill for demanding metal drilling tasks and contact METAV Werkzeuge for expert technical support and ordering assistance — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Marke: MetavCUT SKU: 45089-FDA Diameter: 8.9 mm Overall Length: 125 mm Spiral Length: 81 mm Point Angle: 135° Type: Type N Execution: short Shank Execution: fully ground Material: HSS-G Standard: DIN 338 Colour: bright finished For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Standard Line Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Short Type N best used for? The MetavCUT Twist Drill Short Type N is primarily used for machining metal; it excels in drilling alloyed and unalloyed steel, cast materials and harder plastics thanks to its robust HSS‑G construction and shortened geometry that improves stability. Can the MetavCUT Twist Drill be used in a hand drill or only in a Drilling Machine? The Twist Drill is designed for Drilling Machine applications to achieve optimal stability and concentricity, though it may be used in heavy‑duty hand drills with appropriate clamping and reduced projection; for precise industrial tasks a stationary Drilling Machine is recommended. What are Twist Drills used for? Twist Drills are mainly applied in the machining of high‑strength materials and large drill diameters; their grindable form allows straightforward re‑sharpening and they withstand greater loads, making them suitable for demanding metalwork. Which three drill types exist? The common drill types are Metal Drill, Wood Drill and Stone/Concrete Drill. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip, significantly lowering friction; by re‑pointing the tip the required feed force decreases and the drill centres better in the workpiece. Can you drill wood with this Twist Drill? A Metal Drill like the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated Wood Drills; however, metal drills are easier to re‑sharpen and show less self‑pulling action. For which depths is the Twist Drill most used? Twist Drills are the standard tool for through drilling; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm. Is HSS or HSSE better? The assumption that HSSE is always superior to HSS is incorrect; selection should depend on working conditions and whether the higher cost of HSSE is justified by specific application demands.
8.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill (Type N) — Short HSS‑G, Ø 8.9 mm, 135° Tip, Bright Finished, DIN 338 A MetavCUT Twist Drill (Type N) for precise metalworking, optimised for use with a Drilling Machine and handheld drills where stability and clean holes are essential. Short design for increased stability and precision Fully ground shank for high runout accuracy 135° tip angle for hard materials HSS‑G material for fast, precise metal drilling Conforms to DIN 338 for standardised performance Short length for greater accuracy and less deflection A shorter overall length reduces the exposed Cantilever and therefore the tendency to bend during drilling. The MetavCUT short Twist Drill combines a reduced Spiral Length with a robust geometry to deliver higher stability and repeatable hole accuracy. For workshop applications this means fewer reworks and tighter tolerances, especially when working with hard materials where tool chatter normally degrades the hole quality. Sharper geometry lowers feed forces and boosts speed The HSS‑G (ground high speed steel) geometry and a 135° tip are tailored to penetrate tougher metals with less effort. The grinded flute profile produces very sharp cutting edges and better centring, so drilling can be up to 40% faster and requires significantly lower Feed Force compared with conventional HSS bits. Type N normal spiral makes this bit especially suitable for steels, cast materials and non‑ferrous metals while maintaining clean, burr‑reduced holes. Engineered for metalworking and standardised reliability Manufactured to DIN 338 the short Twist Drill is specified for metal applications on stationary and portable drilling equipment. It excels in drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics. Conformance to the norm ensures consistent dimensions, shank fit and performance across batches, simplifying tool selection and inventory for professional workshops. Practical handling and care for longer tool life Fully ground flutes and a bright finished surface aid chip evacuation and improve runout precision, but ground HSS can be more brittle than rolled variants. Use coolant for extended life when drilling deep or hard materials and avoid excessive lateral forces; stationary drilling with appropriate clamping yields the best results. For handheld operations the short design reduces vibration and improves control, while occasional resharpening restores edge quality if needed. We recommend the MetavCUT Profi Line short HSS‑G Twist Drill as the professional choice for precision metal drilling — for expert advice and technical support contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48089-FDA Diameter: 8.9 mm Overall Length: 117 mm Spiral Length: 75 mm Tip Angle: 135° Type: Type N Execution: short Shaft Finish: fully ground Surface Colour: bright finished Material: HSS‑G Standard: DIN 338 For Use With: Drilling Machine (Handbohrmaschine) Model Series: Profi Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ How well does the MetavCUT Twist Drill Type N perform in stainless and hard steels? The MetavCUT Twist Drill Type N with a 135° tip and HSS‑G ground geometry is designed to reduce Anbohrzeit and improve centring in harder materials; it provides faster penetration and cleaner holes in stainless and alloyed steels when used with appropriate coolant. Can the MetavCUT Twist Drill Type N be used in a handheld drill? Yes, the short design of the MetavCUT Twist Drill Type N improves stability and control in a Hand Drill, making it suitable for many on‑site and workshop tasks; however, for maximum tool life and precision, stationary drilling and cooling are recommended. What are Twist Drills used for? Twist Drills are used primarily for machining high‑strength materials and larger diameters; they are relatively easy to resharpen and withstand higher loads. The short version is particularly suited to precision work in steels and other hard materials. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills.
8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der Spiralbohrer in HSS überzeugt durch die Kombination aus hoher Stabilität durch die kurze Ausführung und der Normkonformität nach DIN 338, was präzise Metallbohrungen erlaubt. Nutzen Sie die robuste Geometrie mit einem Spitzenwinkel von 118° und der für Handbohrmaschine geeigneten Zylinderschaft. Bestellungen und fachliche Beratung erhalten Sie direkt über Metav Werkzeuge oder per Technische Beratung anfordern. Spiralbohrer 8 mm (HSS, kurz) von MetavCUT Der Spiralbohrer 8 mm ist ein kurzer HSS-Bohrer nach DIN 338 für präzises Bohren in Metall an Handbohrmaschine und stationären Maschinen. HSS-Schnellarbeitsstahl für Stahl und Metall Normgerechte Ausführung nach DIN 338 Kurze Bauform für hohe Stabilität Spitzenwinkel 118° für universelle Anwendung Zylinderschaft für Handbohrmaschine Hohe Stabilität für präzise Metallbearbeitung Die kurze Ausführung des Bohrers reduziert die Auskraglänge und sorgt so für erhöhte Stabilität bei Kraftübertragung und Führung. Durch die Verwendung von HSS bleibt die Schneide zäh und widerstandsfähig gegen thermische Belastung, was besonders bei Serien von mittelgroßen Bohrungen im Werkstattalltag von Vorteil ist. Diese Konstruktion vermindert Schwingungen und reduziert damit das Risiko von Werkzeugbruch sowie das Entstehen von Unrundheiten. Passende Anwendungen und Maschinenkompatibilität Der Durchmesser von 8 mm fällt in den Bereich für allgemeine Werkstatt- und Montagearbeiten und eignet sich deshalb besonders für dünne bis mittlere Bleche, Profile sowie Baustahl, Aluminium und Kunststoffe. Einsatz an Handbohrmaschine und stationären Säulenbohrmaschinen ist möglich, wobei bei hochpräzisen Passungen ein Anpunkten mit Zentrierbohrer empfohlen wird. Der Typ N Normalspirale ist speziell auf Metall zugeschnitten und bietet zuverlässige Spanabfuhr bei üblichen Vorschubwerten. Bohrgeometrie, Spitzenwinkel und Bedienhinweise Der Spitzenwinkel 118° ermöglicht ein ausgewogenes Eindringverhalten und gute Zentrierfähigkeit auf flachen und leicht gewölbten Oberflächen; für sehr harte Werkstoffe wäre ein größerer Winkel vorteilhaft. Die Spirallänge 75 mm und die Gesamtlänge 117 mm bieten ausreichend Spanraum für saubere Spanabfuhr. Zur Verlängerung der Standzeit empfiehlt sich passende Kühlschmierstoffzufuhr und abgestimmte Schnittdaten sowie bei Bedarf das Vorbohren zur Entlastung der Querschneide. Qualität, Norm und Eignung für den Werkstattalltag Die Fertigung nach DIN 338 garantiert die standardisierte Abmessung und Ausführung kurzer Spiralbohrer mit Zylinderschaft, was die Austauschbarkeit und Lagerhaltung erleichtert. Die Ausführung in HSS und die Typisierung als Typ N sichern die Vielseitigkeit im Einsatzfeld Metall. MetavCUT steht für zuverlässige Werkzeuge, und Metav Werkzeuge bietet transparente Versorgung sowie technische Beratung aus Emmerich für Anwender in Industrie und Handwerk. Empfehlung: Für belastbare und präzise Metallbohrungen das MetavCUT HSS-Kurzspiralbohrer-Programm wählen; Bestellungen und technische Rückfragen gern über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 40080-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Fakten Durchmesser: 8 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Material: HSS Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz Typ: Typ N Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer (Spiralbohrer, Typ N, SKU 40080-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe und ist damit eine vielseitige Wahl für Werkstatt und Montage. Ist der Bohrer für den Einsatz in einer Handbohrmaschine geeignet? Ja, der Spiralbohrer von MetavCUT ist wegen der kurzen Ausführung und dem Zylinderschaft für die Nutzung an Handbohrmaschine freigegeben und bietet dort gute Stabilität. Welchen Spitzenwinkel hat der Bohrer und was bedeutet das für die Anwendung? Der Spitzenwinkel beträgt 118°, was universelle Einsatzmöglichkeiten fördert und besonders bei Aluminium und allgemeinen Metallarbeiten für gutes Eindringverhalten sorgt. Wie lang sind Spirale und Bohrer insgesamt? Die Spirallänge beträgt 75 mm, die Gesamtlänge 117 mm; diese Dimensionen gewährleisten ausreichende Spanabfuhr bei mitteltiefen Bohrungen. Wie viele Bohrer sind in einer Verpackungseinheit enthalten? Die Verpackungseinheit umfasst 5 Stück des MetavCUT Spiralbohrers mit der SKU 40080-FDA.
8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Spiralbohrer) — Type N short · 8 mm · 135° · HSS‑E · DIN 338 · 5% cobalt‑alloyed · Fully Ground — MetavCUT The Twist Drill Type N short 8 mm is a precision metal‑drilling bit for use in a Drilling Machine, designed for stable, accurate holes in hard materials. Short design for improved stability and precision 8 mm HSS‑E geometry for hard and alloyed steels 135° point angle for reduced walking in stainless steel Fully ground shaft for high concentricity and clean holes Manufactured to DIN 338 for metal machining reliability Precise material and cutting performance for demanding metalwork This short Twist Drill is made from HSS‑E (High Speed Steel with cobalt) and features a 5% cobalt‑alloyed composition that increases hot hardness and wear resistance. The shorter overall length reduces cantilever action, which directly improves stability and reduces the risk of deflection during machining. For operators who require consistent hole quality in tough materials, the cobalt‑enriched steel provides longer tool life under elevated temperatures compared with standard HSS. Designed for stable, accurate drilling in hard materials The Type N geometry with a 135° point angle is optimised for harder substrates such as stainless steel and alloyed steels; the flatter point decreases the tendency to dig in and shortens the initial plunge time. Because the bit is fully ground, it delivers excellent runout accuracy and very sharp cutting edges, resulting in cleaner holes with minimal burr formation. These characteristics are particularly valuable for precision work on components where hole accuracy matters. Practical advantages and typical uses in workshops Short twist drills to DIN 338 are especially suited to bench and machine drilling operations where rigidity is available—examples include drilling in alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The reduced overhang makes setup easier and safer on both stationary and portable drilling equipment. Users benefit from fewer broken tools when observing recommended feeds, speeds and adequate cooling, particularly for diameters below 6 mm; for the 8 mm size here, appropriate cooling extends life and improves surface finish. Recommendations for machining and tool handling When using this short, fully ground twist drill, clamp the workpiece securely and use a Drilling Machine with proper alignment. Start with a centre or pilot mark when high positional accuracy is required and apply cutting fluid for prolonged tool life when machining stainless or high‑strength alloys. The rolling or grinding manufacturing method affects regrindability: fully ground bits offer superb initial sharpness and repeatable geometry, but they can be more brittle—regrind carefully and avoid excessive heat build‑up during sharpening. MetavCUT recommends this short HSS‑E Twist Drill for precision metal applications; for personalised advice or additional technical data contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 — expert consultation is available. Designation: Twist Drill Brand: MetavCUT SKU: 47080-FDA Diameter: 8 mm Spiral Length: 75 mm Overall Length: 117 mm Point Angle: 135° Type: Type N Material: HSS‑E (High Speed Steel with cobalt) Finish / Version: short Shaft Finish: fully ground Colour / Alloy: 5% cobalt‑alloyed For Use In: Drilling Machine Norm: DIN 338 Model Series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking: alloyed and unalloyed steels, cast iron, non‑ferrous metals and certain plastics; the HSS‑E composition and 135° point angle improve performance when machining harder materials. How should I use the MetavCUT Twist Drill Type N to maximise tool life? For best results with the MetavCUT Twist Drill Type N, secure the workpiece, use correct spindle speed and feed for 8 mm HSS‑E, and apply cutting fluid when machining stainless or high‑temperature alloys to reduce wear and avoid overheating. What is a Twist Drill used for? A Twist Drill is mainly applied when machining high‑strength materials and larger diameters; this form is easy to regrind and withstands higher loads. Which three drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills. Why are twist drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, significantly lowering friction so that reduced feed forces are sufficient; it also improves initial centring of the tip in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance is poorer and the hole finish is less clean; however, metal drills are easier to resharpen and show less self‑feeding. At which drilling depths is the twist drill most commonly used? Solid drilling with a twist drill is standard for hole diameters up to about 20 mm and drilling depths up to roughly 100 mm; it is the most frequently used tool for these ranges. Is HSS or HSSE better? The common belief that HSSE is always superior to HSS is incorrect; you should assess whether working conditions justify the higher cost of HSSE for your specific application.
8mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill (Twist Drill) by MetavCUT — HSS‑G double sided, Ø 8 mm, 135°, black finished without margin, fully ground shank, total length 79 mm, spiral length 20 mm The Body Drill (Twist Drill) is a double‑ended HSS‑G metalworking drill designed for precision holes in alloyed and unalloyed steels using a Drilling Machine. Double‑ended design for two usable tips CNC‑ground geometry for precise, clean holes 135° tip angle for hard metals like stainless steel Fully ground shank for high runout accuracy High performance drilling for demanding metalwork Designed for professionals, this HSS‑G Twist Drill delivers reliable performance when accuracy counts. The CNC‑ground flute geometry produces sharp cutting edges and reduces required feed force by up to 50% compared with conventional HSS types, which allows faster penetration and less operator fatigue. The 135° tip angle shortens start time on hard materials and improves centring on tough surfaces, making it particularly suitable for alloyed steel and cast materials. Durable design that keeps downtime low A short, double‑ended configuration provides practical resilience: if one end dulls, the bit can be reversed and reused, effectively offering two cutting tips in one tool. The fully ground shank enhances concentricity and reduces runout, resulting in cleaner holes and less rework. For stationary machining or cooled drilling cycles the construction offers consistent edge life, while the black finished surface improves corrosion resistance during storage. Practical guidance for application and tool choice This Twist Drill is optimised for metal applications such as thin sheet, rivet holes and small component bores, and it pairs best with a stable Drilling Machine at appropriate speeds and coolant. For hand‑held drills, ensure a secure chuck and controlled feed as the ground geometry is sharper and can be more brittle than rolled types. Use cutting fluid for prolonged tool life when working with stainless or tempered steels to avoid premature wear. Who benefits from this tool and how to use it safely Machinists, bodywork specialists and metal fabricators benefit most from this bit’s combination of precision and serviceability. The double‑ended design suits repetitive shop tasks where quick tip rotation reduces tool change time. When drilling, start with a light pilot feed to improve centring; the larger point angle reduces walking on hard surfaces. Follow standard safety and cooling practices to mitigate brittleness risk and extend cutting life. Strong recommendation: choose the MetavCUT Body Drill (Twist Drill) when you need precision, durability and the convenience of a double‑ended HSS‑G solution — for expert product advice and application support contact METAV Werkzeuge. Are you unsure if this tool fits your task or need further technical data? METAV Werkzeuge offers comprehensive advice: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Body Drill (Twist Drill) Brand: MetavCUT SKU: 59080-FDA Diameter: 8 mm Point angle: 135° Type: double sided (double‑ended) Colour/Finish: black finished without margin Application: Drills for metal / Drill for Metal Spiral length: 20 mm Total length: 79 mm Shank execution: fully ground Material: HSS‑G For drilling machine: Drilling Machine Model series: Profi Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Body Drill (Twist Drill) is primarily applied to the machining of high‑strength materials and larger hole diameters; its shape allows easy resharpening and it withstands greater loads, making it suitable for alloyed and unalloyed steel, cast steel and hard plastics. Which three drill types exist? The three main drill types are metal drills, wood drills and masonry/concrete drills; the MetavCUT Body Drill belongs to the metal drill category optimised for metalworking. Why are Twist Drills pointed? The point sharpening reduces the cross‑cut at the tip, lowering friction and required feed forces while improving centring in the workpiece; this is why the MetavCUT double‑ended HSS‑G bit uses a 135° point for better performance in harder materials.
8mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G Drill (Ø 8 mm, 135° Tip, Bright Finished, Fully Ground Shank, DIN 1869) A Twist Drill designed for deep metal drilling in Drilling Machines, offering an extra long length and a 135° tip for reliable penetration. Ø 8 mm for precise hole diameters Extra Long design for deep or hard‑to‑reach holes HSS‑G material for high wear resistance 135° tip angle for harder materials Fully Ground shank for high runout accuracy Exceptional deep‑hole performance for demanding metalwork This extra long HSS‑G Twist Drill is engineered to reach depths that standard drills cannot. The extended overall length and increased spiral length allow clean chip evacuation during deep drilling, reducing the need to retract frequently. As a result, the tool achieves efficient progress in tasks such as structural steel or thick plate drilling, where depth and steady feed are crucial. The DIN 1869 compliance guarantees suitable geometry for deeper holes under challenging conditions. Faster cutting with lower feed forces thanks to precision grinding A fully ground geometry and CNC‑refined flutes give the bit a sharp profile that cuts more efficiently. The ground design enables up to 40% faster drilling and requires significantly less axial force compared with rolled HSS bits, which is particularly beneficial for handheld or smaller drilling machines where operator control matters. The 135° Tip improves centring and reduces walking on hard substrates, helping to produce cleaner bores with less rework. Robust material choice and targeted applications Made from HSS‑G, this Twist Drill is suited for alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron, non‑ferrous metals and hard plastics. The material selection balances hardness and toughness for high performance in metalworking. For stationary drilling with coolant and controlled feeds the bit excels; note that ground drills can be more brittle, so proper clamping and cooling extend tool life and maintain hole quality. Designed for accuracy and machine compatibility The bright finished surface and fully ground shank ensure consistent clamping and minimal runout, supporting precise machining outcomes. The geometry tailored by the DIN 1869 standard promotes repeatable centring and stability in common Drilling Machines. Users seeking clean, concentric holes with reduced radial deviation will benefit from the bit's tight manufacturing tolerances and sharp cutting edges. Strongly recommended: Choose the MetavCUT Twist Drill for deep metal drilling and contact METAV Werkzeuge for expert technical advice — Email info@metav‑werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 32080‑FDA Diameter: 8 mm Tip Angle: 135° Execution / Type: Extra Long Colour / Finish: Bright Finished Shank Execution: Fully Ground Material: HSS‑G Standard: DIN 1869 Spiral Length: 165 mm Overall Length: 240 mm Application: Drills for metal For Machine Type: Drilling Machine Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for The MetavCUT Twist Drill is intended primarily for metals such as alloyed and unalloyed steel, cast steel and grey cast iron; it is also usable in non‑ferrous metals and hard plastics, delivering accurate holes when used with appropriate coolant and feed rates. How should the MetavCUT Twist Drill be used to maximise tool life For best results with the MetavCUT Twist Drill, use steady feeds, adequate clamping and cutting fluid for heat removal; the ground HSS‑G geometry cuts efficiently but benefits from controlled machining conditions to avoid chipping. For what is a Twist Drill used A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. This form is easy to regrind and withstands higher loads while enabling deep, precise holes under demanding conditions. Which three drill types exist There are three main drill types: Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills pointed Pointing reduces the cross‑cut at the tip. By re‑pointing, friction forces are significantly lowered so that less feed force is required and the tip centres more reliably in the workpiece. Can a Twist Drill be used for wood A metal Twist Drill can be used in wood but offers poorer guidance and a less clean finish; however, these drills are easier to regrind and have less aggressive self‑feeding than specialised wood bits. At which depths is the Twist Drill most used A through hole in solid material is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool.
8mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — 8 mm, 135° Point Angle, Extra Long, Bright Finished, HSS-G (DIN 1869) by MetavCUT The Twist Drill is an extra long Twist Drill designed for deep metal drilling with a 135° point angle for use in Drilling Machines. 8 mm Diameter for precise metal drilling Extra-Long Design for deep or hard-to-reach holes 135° Point Angle for harder materials HSS-G Fully Ground for fast, accurate cuts DIN 1869 Standard for deep-hole drilling reliability Drill Deeper with Consistent Precision The Twist Drill Extra-Long construction provides an extended Overall Length of 305 mm and a Spiral Length of 210 mm, enabling reliable Deep Drilling where standard tools fall short. This geometry is especially useful when access is limited or when holes must be made from a greater distance; the Longer Reach reduces the need for extensions and preserves alignment. The 8 mm Diameter maintains good rigidity while allowing fine control, so each hole stays true and Repeatable even at depth. Built for Hard Materials and Stable Entry Equipped with a 135° Point Angle, this Twist Drill penetrates harder materials with reduced walking and improved centring. The HSS-G Material and CNC grinding process create very sharp cutting edges and high Roundness Accuracy, producing clean bore surfaces in alloyed and unalloyed Steel, Cast Steel, Grey Cast Iron and Non-Ferrous Metals. Note that the ground geometry offers excellent precision but requires appropriate coolant and often stationary or guided use to avoid brittle breakage. Faster Drilling with Lower Feed Forces The Fully Ground flute geometry of this Drill allows up to 40% faster drilling and can require up to 50% less feed force compared with conventional rolled HSS designs. This reduction in Thrust improves operator comfort and extends tool life under the right conditions. Conforming to DIN 1869, the deep-spiral form supports effective chip evacuation during long bores and reduces the risk of chip packing that can stall the cut. Reliable Choice for Workshop and Production Use Designed for use in Hand Drills and Drilling Machines, the MetavCUT Extra-Long Twist Drill suits workshop environments and stationary machines where repeatability and reach matter. Professionals who machine thicker components or require access past fixtures will value the combination of Precision and Reach. The Standard Line modelling focuses on robust everyday performance and predictable results in series or single-part production. MetavCUT recommends this Twist Drill for demanding deep-hole metalworking tasks — for expert advice and to verify suitability for your application, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33080-FDA Diameter: 8 mm Point Angle: 135° Type / Execution: Extra Long Colour / Finish: Bright Finished Shank Execution: Fully Ground Material: HSS-G Standard: DIN 1869 Overall Length: 305 mm Spiral Length: 210 mm For Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill is primarily applied for machining high-strength materials and larger bore diameters; it performs well in alloyed and unalloyed Steel, Cast Steel and Non-Ferrous Metals. Its ground spiral geometry is easy to regrind and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? In general tool classification you will find Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drill group and is optimised for metalworking applications. Why are Twist Drills pointed? The pointing reduces the cross-cut at the tip of the Twist Drill, significantly lowering friction and therefore the required feed force; this sharpening also improves centring of the tip in the workpiece for a more accurate start. Can a Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with wood-specific bits. Metal Drills are easier to resharpen and have less self-feeding action, so results in Wood are acceptable but not optimal. For which drilling depths is the Twist Drill most commonly used? A full-penetration bore is often executed with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm this type of tool is the most frequently used option for reliable deep-hole drilling. What is better, HSS or HSSE? The common assumption that HSSE steels are universally superior to HSS is not correct. When choosing, evaluate whether the specific work conditions justify the higher cost of HSSE; MetavCUT supplies HSS-G variants that balance performance and economy for many metalworking tasks.
8mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — 8 mm, 135° Tip Angle, Extra Long • Bright Finished • HSS‑G • DIN 1869 The Twist Drill is an extra‑long HSS‑G metal drill for deep, precise holes with a Drilling Machine, optimised for hard materials and demanding shop use. Extra‑long design for deep drilling CNC‑ground HSS‑G for precise, clean holes 135° Tip Angle suited for hard materials Fully ground shank for excellent concentricity Consistent deep-hole performance for demanding metalwork The MetavCUT extra‑long design delivers reliable drilling when access is restricted or when through‑holes must be produced without multiple setups. With a Total Length 390 mm and a Spiral Length 265 mm, this twist drill enables drilling of extended depths while maintaining steady chip evacuation. The elongated geometry reduces the need for extensions or stepped drilling, which saves time in production and lowers fixture complexity. For machinists seeking reproducible deep holes, the geometry is designed to balance stiffness and Reach. Sharp geometry and material for hard, alloyed steels Made from HSS‑G and finished by CNC grinding, the bit combines toughness with cutting precision. The 135° Tip Angle reduces cutting forces in harder materials such as stainless and tempered steels, improving centring and lowering the risk of workpiece deformation. Grinding the Flutes produces a sharp cutting edge and high runout accuracy, which results in cleaner bores and more consistent hole tolerances. For operators less familiar with grind types: CNC grinding means the Flute geometry is cut rather than rolled, giving higher Dimensional Precision at the cost of slightly increased brittleness — therefore cooling and appropriate speeds are recommended. Recommended applications, handling and compatibility This metal drill is intended for drilling in legated and unlegated Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics under workshop conditions. It is optimised for use in a Drilling Machine and benefits from controlled speeds, steady feed and coolant for prolonged life. The Fully Ground Shank improves clamping concentricity in chucks, reducing runout and vibration. As a practical tip: when working deep, ensure adequate Chip Evacuation and periodic pecking or coolant supply to prevent clogging and premature wear. Choose the MetavCUT Twist Drill for demanding deep metal drilling — for technical advice or to check suitability for a specific application contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT Diameter: 8 mm Total Length: 390 mm Spiral Length: 265 mm Tip Angle: 135° Execution: Extra long Colour / Finish: Bright finished Shank: Fully ground Material: HSS‑G Standard: DIN 1869 Application: Drills for metal / for Drilling Machine Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill (metal Twist Drill) is primarily designed for machining high‑strength and alloyed steels and larger bore diameters; its extra‑long design and HSS‑G material make it suitable for deep holes and applications requiring precise hole geometry. Can the MetavCUT Twist Drill be used in a bench or handheld drill? The MetavCUT Twist Drill is optimised for use in a Drilling Machine; it can be used in powerful benchtop machines but, due to its length and ground construction, handheld use is not recommended for safety and accuracy reasons. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and large bore diameters. Its form allows relatively easy regrinding and it endures higher loads, making it suitable for tough metalworking tasks. Which three drill types exist? Common categories are Metal Drill, Wood Drill and Masonry/Concrete Drill. Why are twist drills pointed? Pointing reduces the cross‑edge at the tip of the twist drill. By pointing, friction forces are significantly lowered so reduced feed forces are required, and the tip centres better in the workpiece. Can you drill wood with a metal twist drill? A metal drill can be used in wood, but guidance is poorer and hole quality is inferior. Metal bits are easier to regrind and have less self‑feed, so results may be acceptable for non‑critical wooden applications. At which drilling depths is the twist drill most used? Twist Drills are the standard tool for through holes and are most commonly used up to diameters of about 20 mm and drilling depths up to 100 mm; extra‑long variants extend that capability for deeper bores. Which is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is incorrect. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for the required application.
8mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — Drill Bit, Diameter 8 mm, 118° Tip Angle, HSS‑G, Fully Ground, Silver, DIN 338 The Twist Drill is a precision Drill Bit for metalworking, offering an 8 mm Diameter and a 118° Tip Angle for reliable centring and clean holes in a variety of metals. Ideal for metalworking applications with high precision Fully ground geometry for faster, cleaner drilling Hexagonal shank for secure torque transmission Conforms to DIN 338 for standardised short Twist Drills Suitable for use in Drilling Machines and handheld drills Faster, cleaner holes thanks to fully ground geometry The Twist Drill uses a Fully Ground HSS‑G construction that produces very sharp cutting edges and high runout accuracy. This manufacturing method (CNC grinding) enables up to 40% faster drilling and requires approximately 50% less feed force compared with rolled HSS bits, which translates into less operator fatigue and shorter cycle times. The grounded flute geometry also yields cleaner, more precise holes particularly in alloyed and unalloyed steel and other hard materials. Secure clamping and improved torque transfer with a hexagonal shank A Hexagonal Shank (sechskant) ensures form‑fit torque transmission into Bit Holders and quick‑change chucks, reducing slippage during heavy cutting. The shank design allows direct use in 1/4" bit holders (E6.3) while remaining compatible with standard chucks, which simplifies tool changes and increases workplace efficiency. For mobile setups and cordless drivers, the hex shank provides safer engagement under higher loads. Material choice and geometry tuned for metalworking Made from HSS‑G (high speed steel, ground), the bit offers a balance of hardness and toughness for drilling metals such as steel, cast iron, non‑ferrous metals and certain engineering plastics. The 118° Tip Angle favours easier penetration and better centring in softer metals like aluminium, while the overall bit geometry remains versatile for a wide range of workshop tasks. Note that fully ground HSS can be more brittle than rolled variants; therefore, recommended use is with adequate cooling and in appropriate drilling setups to maximise service life. Practical use cases and handling recommendations Experienced machinists and maintenance technicians will appreciate the combination of DIN 338 conformity and standardised lengths that support repeatable setups on both stationary and portable machines. For best results, use the correct cutting speed for the material and apply coolant when machining harder alloys. The bit is well suited to production tasks and repair work where precision and repeatability are required rather than rough or one‑off woodworking applications. For precision metalworking applications choose the MetavCUT Twist Drill for reliable performance — for expert advice or to confirm suitability contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 57080-FDA Diameter: 8 mm Tip Angle: 118° Material: HSS-G Execution: fully ground Colour: silver For Drilling Machine: Drilling Machine (Handbohrmaschine) Spiral Length: 70 mm Shank: Hexagonal Overall Length: 135 mm Norm: DIN 338 Model Series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill, a precision Drill Bit made from HSS‑G, is intended primarily for metalworking and performs well in alloyed and unalloyed steels, cast iron, non‑ferrous metals and some hard plastics; for the hardest materials, follow recommended speeds and cooling practices. How should the MetavCUT Twist Drill be clamped and operated for best life? Clamping the MetavCUT Twist Drill in a properly sized chuck or a 1/4" bit holder for the Hexagonal Shank ensures secure torque transfer; use correct cutting speeds, steady feed and coolant as needed to reduce wear and avoid brittle failure. What is a Twist Drill used for? A Twist Drill is mainly applied when working on high‑strength materials and larger drill diameters; the ground flute geometry makes it easier to grind and yields precise holes that withstand higher loads. Which three drill types are there? The main drill types are Metal Drills, Wood Drills, and Stone/Concrete Drills. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the chisel edge at the tip, significantly lowering friction and thus the required feed forces, while improving centring of the bit in the workpiece. Can a Metal Drill be used in Wood? A Metal Drill can be used in Wood, but it offers less guidance and a less clean finish compared with dedicated wood bits; however, such drills are easier to resharpen and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A solid bore is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE is always superior to HSS is not universally true; decide based on your specific working conditions to determine whether the higher cost of HSSE is justified.
8mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Hohe Bohrleistung und reduzierte Anpresskraft machen den MetavCUT Profi Line Spiralbohrer zur effizienten Wahl für anspruchsvolle Metallbearbeitung; die linksschneidende Ausführung erleichtert zudem das Ausbohren festsitzender Schrauben. Profitieren Sie von HSS‑G Material, 135° Spitzenwinkel und der Normkonformität nach DIN 338 für sichere Ergebnisse und unkomplizierten Einsatz, bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer – MetavCUT Profi Line Der Spiralbohrer von MetavCUT ist ein kurzer HSS‑G‑Bohrer, linksschneidend und spezialisiert auf Metallbohrungen sowie das Ausbohren festsitzender Schrauben. Kurzer HSS‑G‑Bohrer nach DIN 338 Linksschneidend für Ausbohren festsitzender Schrauben Spitzenwinkel 135° für harte Werkstoffe Für Handbohrmaschine geeignet, Zylinderschaft Verpackungseinheit 10 Stück industrielle Qualität Dauerhafte Schneidleistung durch HSS‑G für konstante Produktivität Der Einsatz von HSS‑G sorgt für hohe Zähigkeit und thermische Beständigkeit bei Bohrvorgängen in Stahl und Gusswerkstoffen. Weil das Material höhere Temperaturen und Belastungen aushält, bleibt die Schneideform länger erhalten, wodurch weniger Nachschärfen nötig ist und Ausfallzeiten reduziert werden. Ein konkreter Nutzen ist die verlängerte Standzeit bei Serienarbeiten, die Kosten pro Bohrung senkt und die Effizienz in der Werkstatt erhöht. Linksschneidend: Spezifische Lösung für festsitzende Schrauben und schwierige Fälle Die linksschneidende Ausführung ist speziell dafür gedacht, bei Linkslauf gebrochene Schrauben zu lösen und Ausbohrungen zu erleichtern. In Kombination mit moderater Kühlung und kontrolliertem Vorschub reduziert sich die Gefahr von Verkanten und Bruch. Anwender profitieren von einer höheren Treffergenauigkeit beim sicheren Entfernen von Schraubenresten und von kürzeren Rüstzeiten bei Reparaturarbeiten. Präzision und Normkonformität für industrielle Anforderungen Die Einhaltung der DIN 338 gewährleistet reproduzierbare Abmessungen und Schaftgeometrie, was den sofortigen Einsatz in definierten Spannsystemen ermöglicht. Der 135° Spitzenwinkel wurde gewählt, um das Anbohren in harten Werkstoffen zu erleichtern und die Zentrierkraft zu erhöhen. Für Anwender bedeutet dies weniger Ausläufer beim Ansetzen und eine zuverlässigere Maßhaltigkeit bei Passungen und Nachbearbeitung. Praxistipps für sicheren Einsatz und hohe Prozesssicherheit Mit einem Durchmesser von 8 mm fällt der Bohrer in den Standardbereich für Werkstattanwendungen; vorbohren ist in der Regel nicht erforderlich, bei hoher Genauigkeit empfiehlt sich jedoch Anpunkten mit einem Zentrierbohrer. Die Verwendung einer Handbohrmaschine mit Linkslauf wird vorausgesetzt, wenn die linksschneidende Funktion genutzt werden soll. Kühlemittelgabe und moderate Drehzahlen verlängern die Standzeit und reduzieren das Risiko von Überhitzung. Sichern Sie sich den MetavCUT Profi Line Spiralbohrer für präzise Metallbearbeitung direkt bei Metav – bei Fragen stehen wir per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung. Produktmerkmale Artikelnummer: 60080-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Fakten Durchmesser: 8 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, gehärtet) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: linksschneidend (Anwendung: Ausbohren festsitzender Schrauben) Für Bohrmaschine: Handbohrmaschine SKU: 60080-FDA FAQ Wie unterscheidet sich der MetavCUT Profi Line Spiralbohrer von Standardbohrern? Der MetavCUT Profi Line Spiralbohrer verfügt über HSS‑G Material und eine linksschneidende Geometrie; dadurch bietet er erhöhte Standzeit und spezielle Einsatzmöglichkeiten beim Ausbohren festsitzender Schrauben im Vergleich zu konventionellen HSS‑Bohrern. Kann ich den Bohrer mit einer gewöhnlichen Akku‑Bohrmaschine verwenden? Der Bohrer ist für die Verwendung mit einer Handbohrmaschine vorgesehen; für die linksschneidende Funktion ist jedoch eine Bohrmaschine mit Linkslauf erforderlich, sonst entfällt der Vorteil beim Ausdrehen von Schraubenresten. Für welche Werkstoffe ist dieser Bohrer geeignet? Der MetavCUT Profi Line Spiralbohrer eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe, wobei HSS‑G die thermische Belastung bei Metallbearbeitung verbessert. Welche Vorteile bietet der Spitzenwinkel von 135°? Ein Spitzenwinkel von 135° reduziert das Wandern beim Anbohren harter Werkstoffe und verbessert die Zentrierung, wodurch besonders bei Edelstahl und gehärteten Stählen das Eindringen erleichtert wird. Ist der Bohrer einzeln oder nur im Zehnerpack erhältlich? Dieser Artikel wird als Verpackungseinheit mit 10 Stück angeboten; Details zur Verfügbarkeit und Einzellieferung erhalten Interessenten über Metav direkt.
8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N short – 8 mm, HSS‑G, 135°, bright finished (DIN 338) by MetavCUT The Twist Drill Type N short is a high‑performance metal drilling bit for drilling machines, designed for precise, stable holes in steel and other hard materials. Short design for high stability when drilling metal Ground HSS‑G for up to 40% faster drilling 135° tip angle optimised for harder materials Fully ground shank for secure clamping and concentricity Faster, easier drilling thanks to ground HSS‑G and optimized geometry The HSS‑G construction of this Twist Drill delivers tangible productivity gains: the ground High‑Speed Steel enables up to 40% faster drilling while requiring around 50% less feed force than conventional HSS tools. With an 8 mm Diameter and a 135° Tip Angle, this bit penetrates hard materials more reliably, reducing dwell time and wear on the tool. For professionals focused on cycle time and repeatable results, the combination of material and geometry translates directly into increased throughput and lower operator effort. Stable, precise holes from the short design and fully ground shank A shorter Overall Length and a fully ground shank improve rigidity and reduce deflection during drilling. This Twist Drill’s compact execution is particularly suitable for work on lathes, milling centres and hand drilling machines where tool overhang must be minimised. The result is cleaner hole walls and better positional accuracy, which benefits fabrication, assembly and maintenance tasks that demand tight tolerances. Built for metalworking — Type N normal spiral explained This Type N Normal Spiral is the classic configuration for metal drills and was chosen for its balanced chip evacuation and cutting action. According to DIN 338, the short design with a cylindrical shank is intended for robust, stationary or portable drilling in metal. For users less familiar with the terminology: Type N means a general‑purpose metal drill, and short refers to reduced length for improved stiffness and repeatability. Practical advantages and who benefits most Workshop technicians, maintenance crews and metal fabricators will appreciate the combination of durability and ease of use: the bright finished surface improves initial seating and handling, while the 75 mm Spiral Length and 117 mm Overall Length match typical requirements for through and blind holes in plate and component work. For demanding alloys, cast materials and engineering plastics the tool offers longevity and predictable performance, making it a dependable choice for daily production tasks. MetavCUT recommends this HSS‑G short Type N Twist Drill for professional metalworking — for tailored advice or to confirm suitability for your application contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 27080-FDA Diameter: 8 mm Tip angle: 135° Material: HSS‑G Type: Typ N Execution: short Shank finish: fully ground Spiral length: 75 mm Overall length: 117 mm Colour: bright finished For drilling machine: Drilling Machine Standard: DIN 338 Model series: Basic Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills like the MetavCUT Twist Drill Type N are primarily used for the machining of high‑strength materials and for larger drill diameters. The short, ground HSS‑G design makes this Twist Drill robust under heavy loads and suitable for applications where fast penetration and durability are required. Which 3 drill types are there? The main categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for use in metalworking applications.
Reliable holemaking for every production environment
Metal drill bits, primarily classed as HSS drill bits, deliver process-secure, dimensionally accurate holes across a wide range of metallic materials. Designed for both hand-held drilling and CNC series production, these twist drills maintain cutting performance at elevated temperatures and provide the toughness required for industrial workshop and machining applications.
Why these drills matter in your workflow
The core function of metal drill bits is centred on efficient material removal with consistent hole geometry and repeatable centring. Their geometry and cutting-edge design reduce the need for rework, permit drilling without prior centre-punching on many surfaces, and ensure reliable chip evacuation. In practice, this means shorter cycle times on batch runs, safer setup for manual operations, and stable performance under the demands of production.
- Increased production uptime through predictable tool life and wear behaviour.
- Better first-pass quality thanks to optimised tip geometry and cross-point design.
- Versatile material capability: suitable for structural steels, cast irons and non-ferrous metals.
- Compatibility with hand drills, pillar drills and CNC machines for workshop-to-production scalability.
Benefits you can measure
- Reduced rework rates and improved hole tolerances.
- Longer intervals between tool changes when using HSS-Co 5 or HSS-Co 8 variants.
- Improved centring and reduced walking on smooth surfaces thanks to cross-point geometry.
- Flexibility across material classes from aluminium to hardened steels when selecting the appropriate grade.
Metav as your precision partner
Metav combines decades of industry expertise with a comprehensive range that democratises precision for workshops and procurement teams. From the logistics hub in Emmerich, Metav acts as a quality filter for the European market, supporting over 48,000 customers and stocking more than 250,000 products. For buyers seeking a single, reliable source for high-performance drill solutions, Metav offers consistent availability and a professionally curated selection of metal drill bits and related tooling.
Technical data at a glance
- material: high-speed steel (HSS)
- variant: rolled HSS-R; ground HSS-G; high-alloy HSS-E
- cobalt options: HSS-Co 5; HSS-Co 8
- suitable for: alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron, aluminium, copper, brass
- geometry: typical tip angles 118° and 135°; cross-point (split point) for reduced walking
- application environments: hand drilling, pillar drill, CNC machining
Compact and reliably engineered, these metal drill bits—also referred to as HSS drill bits or twist drills—form the backbone of precision drilling operations in industrial and workshop settings.
FAQ
What distinguishes HSS drill bits from cobalt variants?
HSS drill bits provide high toughness and good performance at elevated temperatures; HSS-Co 5 and HSS-Co 8 variants add cobalt for increased hot hardness and extended tool life when machining tougher or stainless steels.
Which materials can metal drill bits handle reliably?
Metal drill bits are suitable for alloyed and unalloyed structural steel, steel castings, grey cast iron, sintered iron and non-ferrous metals such as aluminium, copper and brass, depending on the selected grade and geometry.
When should I choose ground HSS-G over rolled HSS-R?
Choose ground HSS-G for higher concentricity, better chip evacuation and longer service life in production; rolled HSS-R is a cost-effective option for standard workshop tasks.
How does tip geometry affect drilling performance?
Tip angles around 118° are common for general-purpose drilling, while 135° tips and cross-point designs improve penetration and reduce walking on harder or polished surfaces.
Can these drill bits be used on CNC machines?
Yes—metal drill bits are suitable for hand-held, pillar and CNC operations; selection of grade and geometry should match the machine capability and workpiece material.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com