Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
25mm Dial Indicator With Ø60mm Measuring Face, Painted Frame, Matt Chrome Drum, In Carrying Case - Metav IndustryLine
Take advantage of precise thickness control, a wide 60 mm disc anvil and robust construction to measure sheet and component thickness reliably; order directly via Metav Werkzeuge or consult our advisors for tailored selection. M309.150 — Disc‑anvil micrometer (0–25 mm), 60 mm disc, Metav IndustryLine The M309.150 is a disc‑anvil micrometer designed for reliable thickness measurement of sheet materials and components in workshop and quality‑control environments. 0–25 mm measuring range 60 mm disc anvil for larger contact area Resolution 0.01 mm, accuracy ±0.008 mm Painted frame and matt‑chrome measuring drum Precise results for small‑format measurements This instrument delivers measurable certainty across its 0–25 mm span, combining a standard mechanical readout with a fine resolution of 0.01 mm and a stated accuracy of ±0.008 mm. The specified tolerances mean the device is suitable for routine inspection tasks where repeatable thickness readings are needed; the numerical figures support quality documentation and help reduce downstream rework. The directly readable drum and vernier style operation keep the measurement workflow straightforward while preserving traceable numeric performance. Durable contact geometry and tactile handling The large 60 mm disc anvil provides a stable contact area that spreads pressure and reduces local deformation when measuring soft or uneven surfaces, improving result reliability. A painted frame gives corrosion resistance and handling durability in everyday workshop use, while the matt‑chrome measuring drum resists reflections and wear for sustained legibility. Together, these design choices improve operator confidence and extend service life, reducing the need for frequent replacement. Compact class for precision work With a maximum range of 25 mm, the instrument falls into the micro class of calipers and micrometers commonly used for fine mechanical work; such sizes balance reach with low bending risk and allow controlled single‑hand operation. This makes the device especially well suited to tasks such as thin‑sheet thickness checks, component sampling and small‑assembly inspection where compactness and repeatability are priorities. The factory standard construction supports routine shop‑floor and inspection‑bench duties without excessive setup. Ready for transport and workshop use The micrometer is supplied with a protective case for safe transport and storage, safeguarding the measuring faces and mechanism between jobs. Manufactured to factory standard (Werksnorm) and finished for regular workshop conditions, the instrument integrates easily into inspection stations and tool kits. Its simple mechanical operation minimises maintenance requirements; periodic cleaning of the measuring faces and light lubrication of the spindle thread preserve measurement quality and instrument life. Contact Metav Werkzeuge today for expert advice and to secure the Metav IndustryLine disc‑anvil micrometer M309.150 with 60 mm anvil for dependable thickness control — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M309.150 GTIN: 4054469118420 Category: Micrometers (Messschrauben) Standard: Werksnorm Facts Measuring range: 0–25 mm Anvil diameter: 60 mm Resolution (readout): 0.01 mm Accuracy: ±0.008 mm Weight: 1 kg Special features Frame painted Measuring drum matt‑chrome plated Supplied in protective case for transport Analogue micrometer design (mechanical readout) Intended for workshop and quality‑control tasks FAQ What is the measuring range of this micrometer? The M309.150 has a measuring range of 0–25 mm, suitable for small‑format thickness checks. How precise is the instrument? The instrument offers a resolution of 0.01 mm and an indicated accuracy of ±0.008 mm, providing repeatable results for routine inspection. What materials is the disc anvil suited for? The 60 mm disc anvil is beneficial for measuring sheets and parts where a larger contact area reduces local deformation; it is commonly used on metals, plastics and composite panels. Is the micrometer delivered ready for use? The instrument is finished to factory standard (Werksnorm) and supplied in a protective case for safe transport and storage. How should the micrometer be maintained? Keep the measuring faces clean, apply light lubricant to the spindle thread as needed and store the instrument in its case to maintain performance. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Dial Test Indicator Caliper With 0.01mm Reading, Interchangeable Dial, Hardened Measuring Faces, Supplied In Case - Metav IndustryLine
High repeatability together with a fine 0.01 mm reading provides consistent results for series inspection; the matt chrome‑plated frame and compact 0–25 mm range combine precision with easy handling. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed. M307.108 Micrometer with Dial Gauge — 0–25 mm, 0.01 mm Resolution (Metav IndustryLine) The M307.108 Micrometer with Dial Gauge is an analogue precision micrometer designed for repeatable series measurements in workshop and production environments. Analogue reading with 0.01 mm resolution Measuring range 0–25 mm for fine parts Matt chrome-plated frame and drum Supplied in a protective transport case Consistent results for production control The combination of a fine 0.01 mm reading and enhanced repeatability makes this micrometer a reliable choice for routine quality control. The dial gauge provides a clear analogue indication of small deviations, reducing interpretation time during batch inspection. The instrument's repeatability, highlighted in its specification, supports stable measurement chains and minimises process variation in serial production. Built to endure daily workshop use A matt chrome‑plated frame and drum offer corrosion resistance and a subdued surface that reduces glare under bright workshop lighting. The spindle features a 0.5 mm pitch, enabling predictable axial movement per revolution and facilitating fine adjustment. The design balances robustness with handling comfort, so the tool remains serviceable under regular use without compromising measurement stability. Compact micro class for fine mechanical work Classified in the micro segment for its 0–25 mm measuring range, this instrument addresses fine‑mechanical tasks where stiffness and short anvils reduce bending errors. The compact span is ideal for small components, fixtures and toolmaking tasks that require repeatable contact geometry. Clear analogue indexing supports quick pass/fail decisions when throughput is a priority. Practical features that support workflow Equipped with precision measuring faces and a clearly graduated dial, the micrometer simplifies routine checks and setup tasks. The instrument is supplied in a protective transport case suitable for secure storage and shipment, maintaining calibration and physical condition between uses. Its analogue nature keeps operation straightforward while delivering the accuracy needed for production inspection. Contact Metav Werkzeuge today for tailored advice on this Metav IndustryLine micrometer or to arrange procurement directly from Emmerich; call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: M307.108 GTIN: 4054469117416 Category: Messschrauben Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–25 mm Resolution / Reading: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Tariff number: 90173000 Special features / Versions Analogue dial gauge configuration Higher repeatability, ideal for series measurements Frame and measuring drum matt chrome‑plated Precision measuring faces included Supplied in a protective transport case FAQ How accurate is the micrometer for serial inspections? The micrometer achieves a reading of 0.01 mm and is specified for higher repeatability, making the M307.108 suitable for consistent serial inspections where analogue readout and stable contact behaviour are required. Is the instrument suitable for fine mechanical components? Yes. The 0–25 mm measuring range places the device in the micro class, which is optimised for small parts, fixtures and precision components typical in toolmaking and watchmaking tasks. What construction materials are used on the measuring surfaces and frame? The frame and measuring drum are matt chrome‑plated; the instrument is supplied with precision measuring faces and a durable finish that supports everyday workshop use. Does the micrometer come with a protective case? The tool is supplied in a protective transport case to preserve calibration and prevent damage during storage and transport. Can this micrometer handle shopfloor conditions? Designed for production environments, the micrometer combines a sturdy matt chrome finish, clear analogue indication and improved repeatability to withstand regular shopfloor handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Bore Gauge Two Curved Measuring Faces 0.001mm Resolution With Ratchet In Plastic Case - Metav IndustryLine
Take advantage of the combination of 0–25 mm precision, a ratchet spindle for consistent contact, and the convenience of digital data output to speed up inspection routines; order the M302.155.C directly via Metav Werkzeuge or ask the consultants if needed. M302.155.C — Digital Micrometer 0–25 mm, 0.001 mm resolution (Metav IndustryLine) The M302.155.C is a digital micrometer designed for compact, high‑precision measurement tasks in workshops and inspection benches, offering fine 0–25 mm range, a ratchet stop for reproducible pressure and a matt‑chrome measuring drum. 0–25 mm measurement range 0.001 mm resolution digital readout Ratchet spindle for repeatable contact Ball‑ended measuring faces both sides Supplied in a protective transport case Compact precision for small components Designed for fine workshop and inspection tasks, this digital micrometer delivers a 0–25 mm range that places it within the micro category of measuring tools — the ideal choice where compact dimensions and maximum precision matter. The 0.001 mm display resolution ensures that small deviations are visible at a glance, while the stated accuracy of 0.004 mm provides a realistic expectation of measurement repeatability for typical metalworking and precision assembly checks. This balance of resolution and accuracy makes the instrument suitable for small parts inspection, gauge checks and fine mechanical assemblies where space is limited but tolerance demands remain high. Consistent handling and reproducible contact Repeatability is supported by the integrated ratchet spindle, which limits applied measuring force and reduces variation caused by operator technique. The spindle pitch of 0.5 mm and a robust measuring spindle (6.5 mm nominal) maintain mechanical stiffness during contact; the ratchet stop promotes uniform pressure on the workpiece and reduces overshoot. For practical workshop use, the ball‑ended measuring faces allow reliable contact on slightly rounded or turned surfaces, improving centring on shafts and fillets and preventing local indentation on soft materials. Digital features that streamline inspection workflows The instrument includes a clear digital display with ON/OFF, ABS/INC, UNIT and SET functions for flexible operation and unit switching. Data transfer is provided via RB 4.1 output, enabling straightforward capture of measured values into data collectors or inspection software for traceable records and batch documentation. These features support rational, process‑driven inspection routines: measurements are taken quickly, recorded without manual transcription and integrated into quality logs to reduce errors and speed decision making. Durable finish and practical delivery for the workshop The frame is finished in a lacquered coating while the measuring drum is matt‑chrome, combining corrosion resistance with a non‑reflective surface that aids precise reading and handling. The tool is supplied in a protective transport case to safeguard calibration and mechanical alignment during storage and transit. Such packaging reduces the risk of impact damage when the micrometer is moved between the bench and inspection area, helping to preserve long‑term measurement reliability. For precision measurement tasks using the Metav IndustryLine micrometer, contact Metav Werkzeuge in Emmerich for delivery details and tailored technical advice on integrating this instrument into existing inspection processes Technical data Article number: M302.155.C GTIN: 4054469115061 eCl@ss: 27200302 ETIM: EC003590 Tariff number: 90173000 Facts Measurement range: 0–25 mm Resolution / display: 0.001 mm Stated accuracy: 0.004 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Special features Frame: lacquered Measuring drum: matt‑chrome Measuring faces: ball / ball Ratchet spindle included Digital display with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Supplied in a protective transport case FAQ What measurement range does the micrometer cover and how is it classified? The micrometer covers 0–25 mm, placing it in the micro range suitable for compact, high‑precision tasks and small component inspection. What resolution and accuracy can be expected from this digital instrument? The device offers a 0.001 mm resolution on the digital display and a stated accuracy of 0.004 mm, appropriate for fine workshop controls and component checks. How does the ratchet spindle affect measurement quality? The ratchet spindle ensures consistent measuring force for each contact, reducing operator‑induced variation and improving repeatability during serial checks with the Metav IndustryLine micrometer. Are the measuring faces suitable for rounded surfaces? Yes, the ball‑ended measuring faces on both anvil and spindle allow reliable contact on shafts, fillets and slightly curved geometries without causing local surface damage. Can measured values be exported to inspection software? Measured values can be transmitted via the RB 4.1 data output for capture by compatible data collectors and inspection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Depth Micrometer With Quick-Measure Probe, 0.001mm Resolution, Carbide Faces, USB Recharge - Metav IndustryLine
Take advantage of 0.001 mm resolution, carbide measuring faces and a quick-measure probe to speed up inspection cycles while maintaining repeatable, workshop-grade accuracy; order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Digital Micrometer M302.204 — compact digital micrometer, 0–25 mm range, 0.001 mm resolution (Metav IndustryLine) The Digital Micrometer M302.204 is a compact, high-resolution instrument for precise external measurements in fine mechanical and workshop environments, combining a rapid measuring spindle and a rechargeable power supply for continuous use. 0.001 mm resolution for micrometre-grade precision Carbide measuring faces for long-term wear resistance Rechargeable lithium battery with USB charging Quick-measure probe with 3 mm travel for faster cycles High-resolution measurement that reduces rework The instrument delivers 0.001 mm resolution with an stated repeatability of ±0.002 mm, providing the numerical basis for confident go/no-go decisions in quality control. This combination of fine resolution and low error margin makes the device well suited to dimensional checks where small deviations matter. The specified 5–10 N measuring force helps to reduce operator-induced variation, so readings remain consistent across repeated tests. By linking measurement data to clear numeric tolerances, setup and inspection times are reduced and scrap is minimised. Faster inspection cycles through quick measuring and digital convenience Equipped with a quick-measure probe that provides a 3 mm measuring travel, the instrument shortens actuation time compared with slower spindle-only techniques. The digital display features ON/OFF, ZERO, M, HOLD and DATA controls for straightforward operation and short learning curve in the workshop. A built-in rechargeable lithium battery with USB charging removes the need for disposable cells and keeps the device ready for long shifts; the supplied USB cable enables simple recharging between inspection runs. These attributes combine to increase throughput while keeping handling intuitive. Designed for micro-range work and durable daily use Classified in the Micro group (measuring range up to 10–100 mm), this micrometre is optimised for small parts such as precision components, fine mechanical assemblies and tooling checks where a short, stiff spindle provides best measurement integrity. The carbide measuring faces (HM) provide superior wear resistance under frequent contact, extending service life in serial inspections. A compact form factor and a measured weight of 0.8 kg make the instrument easy to handle while maintaining robust construction for the shop floor. Discuss application requirements with Metav Werkzeuge or request an application-oriented recommendation for the M302.204 digital micrometer; the Metav team in Emmerich will advise on suitability and delivery options Technical data Article number: M302.204 GTIN: 4054469182391 Label: Digital-Mess mit Schnellmesstaster 0 - 25 mm mit HM-Messflächen, Ablesung 0,001 mm Core specifications Measuring range: 0–25 mm Maximum range: 25 mm Resolution: 0.001 mm Accuracy: ±0.002 mm Measuring force: 5–10 N Measuring spindle diameter: 6.5 mm Spindle pitch: 10 Weight: 0.8 kg Quick-measure travel: 3 mm Features & materials Carbide measuring faces (HM) Digital display with ON/OFF, ZERO, M, HOLD, DATA buttons Built-in rechargeable lithium battery; USB cable included Quick-measure probe (3 mm travel) Category: Digital micrometers Manufacturer: Metav IndustryLine FAQ What is the measuring range and resolution? The M302.204 measures from 0 to 25 mm with a display resolution of 0.001 mm and a declared accuracy of ±0.002 mm. Is the micrometre suitable for repeated workshop inspection? Yes; the M302.204 combines carbide measuring faces and a defined 5–10 N measuring force to reduce wear and operator variation, supporting repeated checks in production. How is the device powered and charged? The instrument features a built-in rechargeable lithium battery and is charged via the supplied USB cable for convenient recharging between shifts. Which applications fit this instrument best? Its Micro-range class and compact construction make it ideal for fine mechanical parts, precision components and tooling checks where short, stiff measuring faces give best accuracy. Does the specification include a data output port? No data output interface is specified in the provided product information. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Disc Micrometer 0.001mm Resolution, Ratchet, Plastic Case - Metav IndustryLine
Benefit from 0.001 mm resolution combined with a ratchet stop and a matt‑chrome measuring drum for consistent, repeatable measurements; an ideal choice where small tolerances matter. Order the instrument directly via Metav Werkzeuge or consult our specialists for integration and application advice. Digital disc‑face micrometer ND 0–25 mm — digital display, 0.001 mm resolution (Metav IndustryLine) Digital disc‑face micrometer ND 0–25 mm for high‑precision thickness and diameter checks in fine mechanical and production environments Digital display with 0.001 mm resolution Ratchet stop for consistent measuring force Disc measuring faces with matt‑chrome spindle RB 4.1 data output for process integration Consistent small‑part accuracy that reduces rework The instrument delivers 0.001 mm display resolution with an indicated accuracy of 0.004 mm, ensuring that inspection decisions are founded on reliable data. The integrated ratchet stop enforces a repeatable measuring force, which reduces operator‑dependent deviation and lowers scrap rates. The non‑rotating spindle protects delicate surfaces during contact, which is particularly valuable when measuring fine components where surface damage would require costly rework. Together these characteristics make the gauge a pragmatic solution for quality control tasks where traceable, reproducible readings are essential. Robust workshop design with simple data capture Built for daily use, the device combines a painted frame with a matt‑chrome measuring drum, providing both visual durability and smooth tactile operation. The digital readout offers ON/OFF, ABS/INC, UNIT and SET functions to simplify measurement modes and zeroing. For automated documentation and SPC systems the RB 4.1 data output enables straightforward transfer of readings to a logging device or computer, improving inspection throughput and reducing transcription errors. At approximately 0.7 kg, the instrument balances solidity and portability for bench and shop‑floor use. Compact format tailored to fine mechanical applications Classified in the Micro range (measuring range 0–25 mm), the gauge is optimised for tasks that demand high precision in a small envelope — from watch and instrument manufacture to precision tooling and small component inspection. The disc measuring faces provide stable contact on thin or curved workpieces, while the compact size ensures good handling and access in confined fixturing. This combination of a fine measuring range, precise display and mechanical design supports reliable acceptance testing and helps maintain consistent manufacturing quality. Contact Metav Werkzeuge today for product availability and advice on integrating this Metav IndustryLine digital micrometer into existing inspection routines Technical Data Article number: M302.250.C GTIN: 4054469115467 Category: Messschrauben (micrometer) Facts Measuring range: 0–25 mm Display resolution: 0.001 mm Indicated accuracy: 0.004 mm Weight: 0.7 kg Data output: RB 4.1 Special features Digital display with ON/OFF, ABS/INC, UNIT, SET buttons Ratchet stop for constant measuring force Disc measuring faces Non‑rotating spindle Frame painted; measuring drum matt‑chrome plated Thimble style: ND FAQ What tolerance can be expected from this micrometer? The stated indicated accuracy for the digital disc‑face micrometer ND 0–25 mm (Metav IndustryLine, SKU M302.250.C) is 0.004 mm with a display resolution of 0.001 mm. Can measurement data be transferred to a computer? Yes. The micrometer supports RB 4.1 data output for straightforward connection to data loggers or SPC systems, enabling automated capture of readings. Is the instrument suitable for delicate or thin workpieces? The disc measuring faces and the non‑rotating spindle of the ND 0–25 mm micrometer are designed to minimise surface damage, making it suitable for thin, fragile or curved components. Does the micrometer help to avoid operator‑dependent errors? The built‑in ratchet stop enforces a repeatable measuring force and the digital readout reduces manual reading errors, improving reproducibility across operators. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Groove Measuring Micrometer With Ratchet, 0.001mm Resolution, Transport Case - Metav IndustryLine
Take advantage of the combination of compact design, high resolution and workshop-ready functions to measure grooves with confidence; order directly via Metav Werkzeuge or consult our specialists for application advice. M302.121.C Digital Groove Micrometer – 0–25 mm, 0.001 mm resolution (Metav IndustryLine) The M302.121.C is a digital micrometer engineered for precise groove and slot measurement in fine mechanical and industrial workshops, offering a compact form and clear digital readout for repeatable results. Digital display with ON/OFF, ABS/INC, UNIT, SET 0–25 mm measuring range, 0.001 mm resolution Ratchet stop and non-rotating spindle RB 4.1 data output for digital integration Precision for confined grooves and slots The instrument delivers 0–25 mm range with a fine 0.001 mm resolution and an indicated accuracy of ±0.005 mm, making it suitable where small tolerances matter. Its compact frame classifies it in the Micro group (measuring range up to 10–100 mm), which is optimised for fine mechanical tasks and small workpieces. The small anvil faces (approx. 0.75 × 6.5 mm) concentrate contact force, helping to keep readings repeatable when measuring narrow slots or grooves. Consistent measurement workflow and user convenience A built-in ratchet stop and a non-rotating spindle maintain constant measuring force and prevent spindle rotation from disturbing the measured surface, which reduces operator-induced variation. The digital module provides ON/OFF, ABS/INC, UNIT and SET functions so results can be read in the preferred unit and zeroed quickly. The device's spindle pitch of 0.5 mm supports fine, predictable adjustment during incremental measurements. Integration-ready and traceable readouts With an RB 4.1 data output, recorded values can be transmitted to inspection software or a data logger for process documentation and traceability. This facilitates integration into standardised quality procedures and makes the micrometer a practical choice for production environments that demand documented measurement records. The digital signal and clear display reduce transcription errors and speed up routine checks. Built for workshop environments Mechanical robustness and a user-focused layout suit daily use on the shop floor. The compact frame allows single-handed handling while the small measuring faces reach into narrow features; these design choices promote both accessibility and stiffness where space is limited. The product is intended for machine shops, toolrooms and inspection benches that require a reliable, compact solution for groove measurements. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M302.121.C into production inspection routines and ensure exact groove measurements for your projects. Technical Data Article number: M302.121.C GTIN: 4054469114668 Category: Micrometers / Measuring screws Range: 0–25 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Spindle pitch: 0.5 mm Measuring faces: 0.75 × 6.5 mm Data output: RB 4.1 Display functions: ON/OFF, ABS/INC, UNIT, SET Frame class: Micro (measuring range up to 10–100 mm) Facts Measuring range: 0–25 mm Resolution/readout: 0.001 mm Indicated accuracy: 0.005 mm Spindle pitch: 0.5 mm Measuring face dimensions: 0.75 × 6.5 mm Special features Digital micrometer for groove/slot measurement Ratchet stop for constant measuring force Non-rotating spindle to protect the workpiece surface RB 4.1 digital data interface for traceable output Compact, stiff frame suited to confined measurements FAQ How fine is the resolution and what accuracy can be expected? The M302.121.C offers a 0.001 mm resolution with an indicated accuracy of ±0.005 mm, suitable for workshop-level precision in groove measurements. Can measurement data be exported to inspection software? Yes, the micrometer provides an RB 4.1 data output for digital transfer to compatible data loggers or inspection systems. Is the spindle protected against rotation when measuring narrow slots? The device uses a non-rotating spindle, which prevents the spindle from turning and reduces the risk of surface damage in narrow grooves. Does the instrument control measuring force to improve repeatability? A ratchet stop supplies a consistent measuring force, helping to reduce operator-introduced variation and improve repeatability. What type of measuring tasks is this micrometer best suited for? This micrometer is optimised for grooves and slots within its 0–25 mm range and falls into the Micro class for compact, fine‑mechanical measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Indicator With Carbide Tips 0.001mm Resolution Friction Ratchet Ø6.5mmx30° IP54 - Metav IndustryLine
Take advantage of the combination of 0.001 mm resolution, carbide measuring faces and a friction ratchet for repeatable, high-precision measurements of small components; order directly via Metav Werkzeuge or consult our specialists for integration into existing quality-control processes. M302.214 — digital micrometre 0–25 mm with carbide tips and friction ratchet M302.214 is a digital micrometre for fine workshop and inspection tasks, designed for precise external measurements of small components and assemblies. High-resolution 0.001 mm readout Carbide measuring faces Ø6.5 mm x 30° Friction ratchet for uniform measuring force Measure small parts with laboratory-level resolution This digital micrometre delivers a 0.001 mm resolution combined with an observed accuracy of ±0.005 mm, which places the instrument in the upper range of workshop precision. The 2 mm spindle pitch provides a stable mechanical advantage: each revolution advances the spindle by a defined, coarse increment while the fine thread and digital readout allow for controlled, repeatable positioning. These characteristics reduce operator-induced variation and shorten inspection cycles in production environments where rapid, trustworthy readings are required. Durable contact surfaces and consistent force for repeatable results The measuring faces are fitted with tungsten-carbide (HM) tips of Ø6.5 mm at a 30° angle, offering superior wear resistance and long-term dimensional stability when compared with plain steel contacts. Combined with the integrated friction ratchet, the instrument ensures that each measurement is taken with a consistent closing force, improving repeatability across batches and operators. The painted frame provides corrosion protection while keeping the instrument robust enough for daily shop-floor use. Digital usability and data-ready output for quality workflows The instrument features a digital display with ON/OFF/SET and ABS/INC/UNIT functions to switch measurement modes and units quickly. A dedicated RB 4.1 data output is provided for connection to data collectors or SPC systems; compatibility depends on the receiving hardware, but the presence of a standardised output facilitates automated data capture and traceable measurement logging. This arrangement supports efficient quality-control processes, seamless documentation, and easier statistical evaluation of production trends. Contact Metav Werkzeuge to discuss how the M302.214 digital micrometre from Metav IndustryLine can be fitted into current inspection routines or to request further technical clarification; Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M302.214 GTIN: 4054469151885 Label: Digital-Mess mit HM-Spitzen, 0 - 25 mm, 2 mm/stg. Ablesung 0,001 mm, Friktionsratsche Numbers / Core technical data Measuring range: 0–25 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Spindle pitch: 2 mm per revolution Weight: 1 kg Measuring faces: Ø6.5 mm x 30° Zolltarifnummer: 90173000 Special features Digital display with ON/OFF/SET and ABS/INC/UNIT buttons Data output: RB 4.1 Carbide measuring faces (HM) Friction ratchet for consistent measuring force Painted frame FAQ What measuring range does this instrument cover? The M302.214 covers a measuring range of 0–25 mm, making it suitable for external measurements of small components, shafts and fine mechanical parts. What resolution and accuracy can be expected? This digital micrometre offers a 0.001 mm resolution with a stated accuracy around ±0.005 mm, appropriate for high-precision workshop and inspection tasks. What material are the measuring faces made from? The measuring faces are tungsten-carbide (HM) tips, Ø6.5 mm x 30°, providing enhanced wear resistance and long service life when measuring metallic parts. How does the friction ratchet improve measurement quality? The friction ratchet limits closing torque and creates a uniform measuring force, reducing operator influence and improving repeatability across repeated measurements. Can measurement data be integrated into SPC or data-collection systems? The instrument provides an RB 4.1 data output and a digital display with ABS/INC/UNIT modes; integration into SPC systems depends on the receiving hardware and available adapters, but the presence of a standard output streamlines automated data capture. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Inset Micrometer 0–25mm 0.001mm Resolution Carbide Faces Ratchet, DIN 863 - Metav IndustryLine
The combination of 0–25 mm measuring range, 0.001 mm resolution and carbide measuring faces delivers reliable repeatability and low wear for fine-component inspection; benefit from precise, compact measuring in production or quality control. Order the M302.091.C directly via Metav Werkzeuge or consult our advisors for integration advice. M302.091.C – Digital inset micrometer, 0–25 mm, 0.001 mm resolution (Metav IndustryLine) A compact digital inset micrometer designed for precise axial measurements in small components and assembly fixtures, ideal where space is limited and repeatable contact force is required. 0–25 mm measuring range Resolution 0.001 mm Carbide measuring faces, plan-parallel Ratchet spindle for reproducible contact force Precision where small tolerances matter This inset micrometer is engineered for applications that demand fine resolution and consistent results. With a resolution of 0.001 mm and a stated accuracy of 0.004 mm, the instrument supports micro‑level inspection tasks typical in precision engineering and small-part production. The ratchet spindle ensures a constant measuring force, reducing operator influence on results and improving reproducibility over repeated measurements. Classified in the micro measuring group (compact range), it is especially suited to delicate assembly, small-batch finishing and precision inspection stations. Fast readout and traceable data transfer The integrated digital readout provides straightforward operation via ON/OFF, ABS/INC, UNIT and SET keys, enabling quick changes between measuring modes. For automated data collection and traceability, the unit includes RB 4.1 data output, allowing straightforward connection to inspection systems or data loggers. This combination of clear visual feedback and digital interfacing reduces processing time during quality checks and simplifies documentation of measured values for production records. Robust contact surfaces and standards compliance Measuring faces are made of carbide and are plan‑parallel, offering high wear resistance and long service life even under frequent use. The design follows DIN 863 guidelines for micrometre construction, which assures compatibility with workshop procedures and expectations. The compact body and a 12 h7 mounting provision make the instrument easy to integrate into fixtures or measuring rigs, while the modest weight contributes to convenient handling at inline or bench inspection stations. Practical benefits for workshop and inspection teams Compact dimensions combined with a precise spindle diameter support reliable measurements in confined spaces and in fixtures where repeatability is crucial. The unit’s features deliver clear practical advantages: reduced rework through more accurate checking, faster throughput thanks to digital readout and data output, and lower lifetime costs because of the carbide measuring faces that resist deformation and wear. These benefits make the instrument a solid choice for production monitoring, incoming inspection and laboratory use. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M302.091.C inset micrometer can be integrated into existing inspection workflows or to request specification support and a tailored quotation Technical data Article number: M302.091.C GTIN: 4054469114507 Category: Micrometers (messschrauben) ECLASS: 21170330 ETIM: EC003590 Tariff number: 90173000 Norm: DIN 863 Core technical data Measuring range: 0–25 mm Resolution (reading): 0.001 mm Accuracy: 0.004 mm Weight: 0.5 kg Measuring spindle diameter: 6.5 mm Mounting: 12 h7 Special features Measuring faces: carbide, plan-parallel Digital display with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Ratchet spindle for reproducible contact pressure Compact inset design for fixture integration FAQ What measuring range and resolution does this instrument offer? The M302.091.C provides a 0–25 mm measuring range with a 0.001 mm resolution, making it suitable for fine metrology tasks and small-component inspection. Are the measuring faces wear‑resistant for high-volume use? Yes, the micrometer is fitted with carbide measuring faces that are plan‑parallel, offering high resistance to wear and consistent contact geometry over lengthy inspection cycles. How is repeatable contact force achieved? A built‑in ratchet spindle controls the final approach, ensuring uniform contact pressure and improved repeatability across multiple measurements. Can measurement data be transferred to a PC or logging system? The instrument features an RB 4.1 data output, enabling connection to data acquisition systems or inspection software for traceability and statistical analysis. Is the micrometer compliant with recognised standards? Construction and dimensional criteria follow DIN 863, providing conformity with common workshop and inspection standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer 0.001mm Resolution IP65, Ratchet, 4-Button Display, Plastic Case - Metav IndustryLine
Take advantage of a compact, workshop-ready instrument that combines 0.001 mm digital resolution with an IP65 enclosure and a ratchet thimble for repeatable measuring force; order the unit via Metav Werkzeuge or contact our consultants for specification advice. M302.294 Digital micrometer — 0–25 mm, IP65, 0.001 mm resolution (Metav IndustryLine) The M302.294 Digital micrometer is a compact, workshop and field-capable measuring instrument designed for high‑precision external measurements in production and inspection environments. IP65 protection for workshop and field use 0.001 mm digital resolution Ratchet thimble for consistent measuring force Supplied in protective transport case Reduce rework with traceable, high-resolution readings A fine resolution of 0.001 mm delivers measurable benefits when tolerances are tight: smaller correction loops, fewer scrapped parts and faster process stabilisation. The instrument provides a clear digital readout with four-function control — ON/zero, mm/inch, ABS, HOLD — which simplifies switching between absolute and incremental modes and recording values. Calibrated workflows profit from the device’s conformity to DIN 863, ensuring that readings fit the familiar industry framework; the precise thimble mechanism and ratchet thimble help avoid over‑compression during measurement, improving repeatability across operators. Robust construction for everyday industrial use Engineered for the shop floor, the micrometer’s IP65 rating guards the electronics from dust and water jets, permitting use close to machining centres and assembly lines. The unit features hardened measuring faces (Ø 6.5 mm) that resist wear, so accuracy is retained over long service intervals. Supplied in a protective transport case, the instrument is ready for mobile inspection or secure storage between shifts. The compact dimensions and sturdy build place this micrometer in the micro measuring range (10–100 mm), which is ideal where space is restricted but high precision is required. Practical integration into inspection routines Digital output and ergonomic controls reduce data transcription errors and speed up routine checks. The compact digital format and the device’s repeatable measuring force make it suitable for first-article inspections, incoming goods checks and spot checks on the shop floor. Maintenance demands are low: the sealed design limits contamination of the electronic module and the ratchet preserves the spindle from excessive force. As a rational choice, this instrument supports lean quality processes by combining accuracy, durability and straightforward operation. Contact Metav Werkzeuge for tailored advice and secure the Metav IndustryLine M302.294 for reliable 0.001 mm measurements in your workshop. Technical data Article number: M302.294 GTIN: 4054469115610 eClass: 21170328 ETIM: EC003590 Standard: DIN 863 Facts Measuring range: 0–25 mm Resolution / display reading: 0.001 mm Protection class: IP65 Measuring face diameter: 6.5 mm Special features Digital display with ON/zero, mm/inch, ABS and HOLD functions Ratchet thimble for consistent measuring force Hardened measuring faces Delivered in protective transport case Data output: RB 4 Category: Micrometers (measuring screw) FAQ Is the micrometer suitable for workshop use near machining operations? The M302.294 digital micrometer from Metav IndustryLine is IP65-rated, which makes the instrument suitable for use close to machining and assembly processes where dust and occasional water exposure occur. What resolution and repeatability can be expected? The instrument provides a 0.001 mm resolution and benefits from the ratchet thimble to improve repeatability of external measurements during repetitive inspections. Are the measuring faces durable enough for frequent use? Yes, the M302.294 is equipped with hardened measuring faces (Ø 6.5 mm) designed to resist wear during routine shop‑floor use. Can measurements be switched between metric and imperial units? The micrometer’s 4-button display includes a mm/inch function, allowing quick switching between metric and imperial readouts for mixed workflows. Does the micrometer include a transport case? The instrument is supplied in a protective transport case to facilitate safe storage and movement between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer 0.001mm Resolution, Auto-Off, Ratchet Stop, IP65, Matt Chrome Measuring Drum, Case - Metav IndustryLine
Compact, IP65-protected and with 0.001 mm resolution — ideal for precise workshop control and repeatable quality checks. Benefit from the ratchet measuring spindle and a protective case for safe transport; order via Metav Werkzeuge or request consultancy for application advice. Digital Micrometer M302.244.N — IP65, 0.001 mm resolution (Metav IndustryLine) The Digital Micrometer M302.244.N is a compact 0–25 mm measuring instrument designed for high-precision workshop and inspection tasks, combining robust protection with a fine 0.001 mm display. 0.001 mm resolution for fine measurement IP65-protected for workshop environments Ratchet thimble for constant measuring force Delivered in protective case for safe transport Precision that secures production control This micrometer delivers a 0.001 mm readout on a digital display that shows values in millimetres only, enabling fast, unambiguous readings for quality-control routines. Classified in the micro range (max. 10–100 mm), it is sized for component and subassembly inspection where short measuring faces and low deflection matter. The combination of fine resolution and a ratchet mechanism reduces operator-caused variation, supporting tighter tolerances and fewer rework cycles while keeping measurement throughput high. Designed for repeatability and straightforward handling Repeatable contact pressure is provided by the integrated ratchet thimble, which together with the matt-chrome measuring drum ensures consistent engagement on the measuring faces (diameter 6.5 mm). The digital display features an auto-off function to preserve battery life without manual intervention, and the unit’s single-system display in millimetres minimises readout errors in serial inspection. These ergonomic and functional elements translate directly into fewer measurement faults and a more efficient inspection workflow. Robust construction and conformity for workshop conditions Built with a painted frame and a matt-chrome measuring drum, the device resists routine workshop wear while remaining easy to clean. The IP65 rating protects the instrument against dust ingress and low-pressure water jets, making it suitable for harsher production environments. Conforming to DIN 863, the micrometer matches recognised mechanical measuring conventions used across industry, and it is supplied in a protective case for transport and storage, ready for immediate use in the inspection bench or on the shop floor. Secure process reliability with the Metav IndustryLine digital micrometer M302.244.N — contact Metav Werkzeuge for technical advice and procurement from Emmerich. Technical data Article number: M302.244.N GTIN: 4054469115412 Category: Micrometers Measured values Measuring range: 0–25 mm Resolution: 0.001 mm Display: Digital, millimetres only, automatic switch-off IP protection: IP65 Materials & features Frame: painted Measuring drum: matt-chrome plated Measuring faces: 6.5 mm Ratchet: yes Norm: DIN 863 Case: included Manufacturer: Metav IndustryLine FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 0–25 mm, making it suitable for small parts and fine mechanical components; the Metav IndustryLine unit follows this range precisely. How fine is the resolution and what accuracy can be expected? Resolution is 0.001 mm on the digital display; the device is intended for fine workshop measurements where micrometre resolution improves inspection fidelity. Is the instrument protected against dust and coolant? Yes — the micrometer is rated IP65, providing protection against dust ingress and low-pressure water jets, suitable for many workshop environments. Does the micrometer include a ratchet or force control? A ratchet thimble is included to ensure consistent measuring force and improved repeatability during serial measurements. Is the micrometer supplied ready for use and how is it delivered? The instrument is supplied in a protective case for transport and storage and arrives ready for immediate use on the inspection bench. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer 0.001mm Resolution, Friction Thimble, Auto-Off, Plastic Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement, a compact 0–25 mm range and an intuitive digital interface for consistent quality control in small-part production. Order the instrument directly via Metav Werkzeuge or contact the sales team for application advice. Digital micrometer M302.004.N — 0–25 mm, 0.001 mm resolution (Metav IndustryLine) The Digital micrometer M302.004.N is a compact precision micrometer for workshop and laboratory use, designed for accurate dimensional checks on small components and assemblies within a 0–25 mm measuring range. High resolution 0.001 mm display Compact 0–25 mm measuring range Durable 6.5 mm measuring faces Supplied in a protective case Precise readings for repeatable quality control The micrometer delivers a 0.001 mm resolution on a clear digital display, enabling reliable detection of small dimensional deviations that matter in precision parts manufacture. The instrument follows DIN 863, which ensures the measuring procedure and tolerance assumptions align with common metrology standards. Built with a small measuring span, the device is well suited to applications where repeatability and tight tolerances are required, such as component inspection in assembly, toolmaking and prototype evaluation, while the compact format keeps handling and storage straightforward. Efficient measurement workflow with clear controls A straightforward control panel with ON/OFF/SET and ABS/INC/UNIT functions allows fast zeroing, incremental measurement and unit switching, reducing process steps during inspection routines. The auto‑off feature helps preserve battery life during intermittent shop-floor use, while the light-weight construction and balanced design minimise operator fatigue over extended measuring sessions. Taken together, these characteristics support efficient measurement throughput and lower the risk of readout errors in routine quality assurance tasks. Robust contact geometry for consistent contact The instrument is fitted with 6.5 mm measuring faces, offering a stable contact area that contributes to repeatable results across batches of small workpieces. The spindle and anvil geometry prioritise parallel seating and consistent closure force for each measurement, reducing variation caused by slight misalignment. These mechanical design details mean that even users with basic metrology training can obtain trustworthy measurements, making the tool a practical choice for production lines and maintenance departments alike. Practical delivery and workshop integration Supplied in a protective case, the micrometer is ready for secure transport and workshop storage; the case protects the instrument from knocks and contamination between uses. The device’s modest weight of 0.5 kg and compact dimensions make it easy to integrate into existing inspection benches and portable measurement kits. For procurement and inventory purposes the SKU is M302.004.N and the GTIN is 4054469113791, which supports traceable asset management in quality systems. For reliable small-part measurement choose the Metav IndustryLine digital micrometer and contact Metav Werkzeuge for tailored procurement and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M302.004.N GTIN: 4054469113791 Category: Micrometer (micrometre screw gauge) Facts Measuring range: 0–25 mm Resolution/reading: 0.001 mm Measuring face diameter: 6.5 mm Weight: 0.5 kg Special features Digital display with ON/OFF/SET and ABS/INC/UNIT Auto‑off function Conforms to DIN 863 Supplied in protective case ECLASS: 21170328 ETIM: EC003590 FAQ What is the smallest increment this micrometer shows? The micrometer provides a resolution of 0.001 mm, displayed on the digital readout for precise incremental measurements. Is the instrument suitable for routine workshop inspection? Yes. The compact 0–25 mm range and robust measuring faces make the Metav IndustryLine digital micrometer M302.004.N suitable for routine dimensional checks in production and maintenance. Which standards does the device meet? The instrument is produced to comply with DIN 863, ensuring alignment with standard mechanical micrometre practices. Does the delivery include a case for transport? A protective case is supplied with the micrometer to safeguard the instrument during transport and storage. How can this micrometer be ordered or specified for procurement? Order using SKU M302.004.N and GTIN 4054469113791; for specification advice contact Metav Werkzeuge for application support. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer 0.001mm Resolution, Ratchet Spindle, ABS/ON/mm‑in/HOLD Display, DIN 863, Plastic Case - Metav IndustryLine
Take advantage of the 0.001 mm resolution, ratchet thimble and digital interface to secure fast, repeatable thickness checks and seamless logging into quality workflows — order or request advice via Metav Werkzeuge for a reliable supply and application support. Digital micrometer M302.290 — 0–25 mm, 0.001 mm resolution, ratchet (Metav IndustryLine) The Digital micrometer M302.290 is a compact workshop gauge for precise external measurements in mechanical engineering, toolmaking and quality control environments. Digital readout 0.001 mm resolution Ratchet thimble for consistent measuring force 6.5 mm hardened measuring faces RB 4 data output for external logging Precision where it counts for inspection and production The instrument provides a 0.001 mm resolution, which supports fine-grained distinction in dimensional inspection and enables shorter decision loops in production. A digital display with zero/ON, mm/inch, ABS and HOLD functions simplifies readings and reduces interpretation errors compared with analogue scales. Compliance with DIN 863 underlines the micrometer's suitability for standardised measurement tasks, making it a dependable tool for incoming inspection, process checks and final control where traceable and reproducible values are required. Reproducible contact force and durable measuring faces Equipped with a ratchet thimble, the micrometer delivers a controlled measuring force that improves repeatability across operators and shifts. The tool features hardened measuring faces of 6.5 mm diameter, which resist wear and maintain accuracy under frequent use in workshop conditions. These design choices translate into fewer re-measurements, longer intervals between maintenance and more reliable part acceptance decisions on the shop floor. Ready for digital quality workflows A built-in RB 4 data output enables straightforward connection to data collection systems or external loggers, reducing manual transcription and audit effort. The instrument’s digital functions — including absolute/incremental modes and a hold function — streamline batch checks and reporting. For laboratories and production teams seeking to integrate handheld gauges into a documented inspection routine, the digital interface minimises human error and accelerates traceable documentation. Practical design for everyday metrology tasks The micrometer is compact, simple to operate and optimised for routine measurement of external diameters and thicknesses. Its user-facing controls and ratchet mechanism support one-handed operation and consistent results, while the digital readout accelerates throughput in repetitive measurement tasks. This balance of precision, durability and connectivity positions the instrument as a pragmatic choice for workshops, maintenance departments and quality control benches. Contact Metav Werkzeuge for tailored advice on integrating the M302.290 into inspection routines or for supply and spare-part information — reliable support from Emmerich to your workshop. Technical Data Article number: M302.290 GTIN: 4054469146423 Category: Micrometers Measuring range: 0–25 mm Resolution: 0.001 mm Measuring face diameter: 6.5 mm Tariff number: 90173000 Digital display with ON/0-, mm/inch, ABS and HOLD Ratchet thimble Data output: RB 4 Compliant with DIN 863 Hardened measuring faces FAQ What measurement accuracy does this micrometer offer? The micrometer provides a display resolution of 0.001 mm; when used and read according to standard procedure the M302.290 supports highly repeatable external measurements suitable for workshop and inspection tasks. Can this device measure in inches as well as millimetres? Yes — the digital readout supports mm/inch selection via the dedicated function, allowing the micrometer to report values in either unit system. Is the micrometer suitable for logged data collection? Yes — the M302.290 includes an RB 4 data output for connection to external recorders or data-collection systems, facilitating documented quality processes. Does the product include a controlled measuring force feature? The micrometer is fitted with a ratchet thimble, which provides a reproducible contact force to improve measurement consistency across operators. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer Ratchet Thimble, Matt Chrome Measuring Drum, IP65, Plastic Case - Metav IndustryLine
The robust combination of a digital display, IP65 protection and a ratchet stop provides repeatable, workshop-ready results; supplied in a protective case and conforming to DIN 863. Order the micrometer directly via Metav Werkzeuge or consult our product specialists for application advice. Outside Micrometer M302.274 — digital, IP65 protection (Metav IndustryLine) The Outside Micrometer M302.274 is a ratchet‑stopped digital micrometer for precise external measurements in workshop inspection and production environments. Digital display: ON/OFF, ABS/INC, SET, UNIT IP65 protection for robust workshop use Ratchet stop for consistent measuring pressure Supplied in protective case, DIN 863 compliant Precise, repeatable measurements for fine production control The instrument is built to deliver high repeatability where tight tolerances matter. With a measuring range of 0–25 mm and a fine display resolution of 0.001 mm, this digital micrometer is classified in the micro group for compact, high‑precision tasks. The integrated ratchet stop enforces a uniform measuring force, reducing operator‑introduced variation and making comparisons between components reliable. The design follows DIN 863, ensuring the tool meets established accuracy expectations for workshop and inspection use. Robust design that tolerates daily workshop conditions Durability is embedded in the specification: an IP65 rating protects the electronics from dust and water jets, while the frame is lacquered and the measuring spindle is matt‑chromed for wear resistance and low friction. The instrument includes 6.5 mm measuring faces, sized for stable contacts on external features, and arrives in a protective case to safeguard the instrument during transport and storage. The low mass (approx. 0.5 kg) and an ergonomic profile support straightforward handling during repetitive checks without compromising stiffness. Efficient digital features for practical measurement workflows The micrometer’s digital display includes ON/OFF, ABS/INC, SET and UNIT functions for quick zeroing, incremental measurement and unit switching, shortening inspection cycles and reducing read‑out errors. The IP65‑protected electronics make it suitable for production floors where coolant splash or dust occur. The SKU M302.274 identifies the exact instrument and, paired with the GTIN, supports inventory and asset tracking within quality systems. For shops seeking dependable, easy‑to‑read micrometry, this model balances precision and practicality while conforming to workshop standards. Choose the Metav IndustryLine M302.274 when consistent digital micrometry and rugged workshop protection are required — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M302.274 GTIN: 4054469115535 Manufacturer: Metav IndustryLine Norm: DIN 863 IP protection: IP 65 Weight: 0.5 kg Material: Frame lacquered; measuring drum matt‑chromed Numbers / Core technical data Measuring range: 0–25 mm Resolution/readout: 0.001 mm Measuring faces: 6.5 mm Weight: 0.5 kg Tariff number: 90173000 Special features / Versions Digital display with ON/OFF, ABS/INC, SET and UNIT functions Ratchet stop for consistent measuring pressure Supplied in protective case for transport and storage Conforms to DIN 863 IP65‑rated electronics for dust and splash resistance Suitable for precision external measurements in workshop settings FAQ What measuring range does this micrometer cover? The micrometer covers 0–25 mm, placing it in the micro class for compact, high‑precision external measurements. What resolution and repeatability can be expected? The device offers a display resolution of 0.001 mm and a ratchet stop to ensure repeatable measuring force and consistent results. Is the instrument protected against workshop contaminants? Yes — the IP65 rating means the electronics are protected from dust and low‑pressure water jets, making it suitable for typical production environments. Are the measuring faces hardened or sized for stable contact? The micrometer features 6.5 mm measuring faces and a matt‑chromed spindle to ensure stable contact and wear resistance during repeated use. Does the instrument include a storage case? The micrometer is supplied in a protective case to protect the tool during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer Stationary Spindle 0–25mm 0.001mm Resolution 5mm Anvil Hole, IP65 - Metav IndustryLine
Take advantage of the micrometre's combination of compact installation, high resolution and consistent contact control for reliable inline measurements; order the unit directly via Metav Werkzeuge or consult the Metav team for integration advice. Digital Built-in Micrometer M302.091.S — 0–25 mm, 0.001 mm resolution (Metav IndustryLine) Digital Built-in Micrometer M302.091.S is a compact, fixture-mounted measuring device intended for precise linear measurements in fine mechanical and production environments. Resolution 0.001 mm for fine grading Accuracy ±0.004 mm for reproducible results Non-rotating spindle with ratchet control Ø 5 mm bore for gauge insert mounting Precision suited to fine mechanical installation The built-in micrometer offers a measuring range of 0–25 mm and a reading resolution of 0.001 mm, delivering repeatable sub-millimetre discrimination within a compact envelope. Classified in the Micro category (max. 10–100 mm), this size class prioritises minimal deflection and high rigidity at short spans, making the instrument particularly suitable for fixture integration and fine mechanical assemblies. The specified accuracy ±0.004 mm provides a verifiable basis for quality control tasks that demand consistent tolerances rather than laboratory-only ultra‑precision. Mechanical features that secure consistent contact Designed for inline mounting, the micrometre includes a non-rotating spindle and an integrated ratchet, both of which contribute to stable and repeatable contact force during measuring cycles. The measuring faces are plan‑parallel and incorporate a Ø 5 mm bore for gauge inserts, enabling simple replacement or customisation for special anvils. A 12 h7 mounting interface facilitates precise alignment in fixtures. These mechanical characteristics reduce operator‑dependent scatter and simplify use within automation or jigged setups, improving throughput and traceability in production. Digital interface and shop‑floor compatibility The device features a digital readout with ON/OFF, ABS/INC, UNIT and SET functions and an RB 4.1 data output for transfer to SPC or machine control systems, supporting modern data collection workflows. The construction and interface are chosen to balance immediate readout convenience with programmable data export for process monitoring. The instrument’s modest mass (0.5 kg) eases handling during assembly into machines or gauges while maintaining the rigidity required for repeatable results. Metav IndustryLine’s distribution from Emmerich acts as a quality filter for European workshops, ensuring consistent product checks before shipment. For fixture-level precision choose the Metav IndustryLine built-in micrometer and contact Metav Werkzeuge for integration guidance and delivery from Emmerich; the Metav team will advise on mounting and data interfacing to match production requirements. Technical Data Article number: M302.091.S GTIN: 4054469114521 Category: Messschrauben Mounting: 12 h7 Facts Measuring range: 0–25 mm Reading resolution: 0.001 mm Accuracy: 0.004 mm Weight: 0.5 kg Measuring face bore diameter: Ø 5 mm Special features Digital display with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Non-rotating spindle Ratchet for constant measuring force Measuring faces plan-parallel with Ø 5 mm bore for gauge inserts Designed as built-in/fixture micrometre FAQ What is the measuring range and resolution of this micrometre? The Digital Built-in Micrometer M302.091.S measures from 0 to 25 mm with a resolution of 0.001 mm and an accuracy of ±0.004 mm. Can the instrument be connected to data logging systems? Yes, the device provides an RB 4.1 data output for connection to SPC systems or machine interfaces. How does the ratchet and spindle design improve measurement consistency? The non-rotating spindle combined with a ratchet mechanism on the Metav IndustryLine micrometre ensures consistent contact force and reduced operator influence, resulting in more reproducible measurements. Is the micrometre suitable for fixture mounting? The unit is a built-in type with a 12 h7 mounting interface and plan-parallel faces with a Ø 5 mm bore for gauge inserts, making it suitable for secure fixture integration. What are the display functions available on the readout? The digital display includes ON/OFF, ABS/INC, UNIT and SET buttons for straightforward measurement mode selection and zeroing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer With 0.001mm Readout, Ratchet, Grooved Tip For Slot Measurement, Supplied In Case - Metav IndustryLine
Take advantage of precise, repeatable readings and seamless data transfer for effective process control; the instrument combines a 0–25 mm measuring range, 0.001 mm resolution and a ratchet stop for consistent force. Order the micrometer directly via Metav Werkzeuge or ask our consultants for application advice. Digital Micrometer M302.161 — 0–25 mm, 0.001 mm resolution, groove tip (Metav IndustryLine) The Digital Micrometer M302.161 is a compact, workshop-ready micrometer designed for measuring crimp heights and narrow grooves in precision components across metalworking and micro‑assembly applications. Digital readout 0.001 mm resolution RB 4.1 data output interface Ratchet stop for consistent measuring force Matt‑chrome measuring drum, painted frame Precision on micro components for reliable quality control The instrument delivers 0.001 mm display resolution and an indicated accuracy of ±0.005 mm, enabling fine differentiation of crimp heights and shallow features. With a measuring span of 0–25 mm, this tool sits in the micro measurement class, ideal where short, rigid anvils and minimal moment are required for repeatable results. The specially shaped tip for grooves (anvil dimensions 6.5 x 3.5 x 0.5 mm) concentrates the contact area for reliable point measurements on narrow channels; this reduces measurement ambiguity when assessing crimped terminations or slot depths. The distinction between display resolution and achieved accuracy is explained here: resolution denotes the smallest increment shown on the display, while accuracy expresses the expected deviation under standard conditions — both values help to plan inspection tolerances and corrective measures in production. Consistent handling and digital readiness for process integration Designed for reproducible operation, the device features a ratchet stop that imposes a uniform measuring force and prevents over‑clamping, which directly improves result consistency across different operators. The digital display supports ON/OFF, ABS/INC, UNIT and SET functions for straightforward zeroing and unit selection at the bench. For data logging and statistical process control, the instrument provides an RB 4.1 output, allowing direct transfer of readings into compatible data capture systems and reducing manual transcription errors. The robust construction — a painted frame with a matt‑chrome measuring drum — offers tactile stability and corrosion resistance suited to daily workshop use, while the instrument mass (approx. 0.7 kg) gives a steady feel during fine adjustments. Practical benefits for workshop and inspection routines Integrating this micrometer into routine checks speeds up quality assurance by combining a compact measuring range with machine‑friendly data output. The clear numeric resolution simplifies pass/fail decisions for narrow tolerance features, and digital transfer via RB 4.1 supports traceable measurement records for batch documentation. The compact design and groove‑specific tip make the instrument particularly appropriate for electronics terminals, small assemblies and precision finishing tasks where crimp height or slot depth are critical. The overall benefit is fewer manual entries, faster throughput of inspection steps and more reliable measurement data feeding back into production adjustments. For precise crimp and groove measurement with reliable data transfer, contact Metav Werkzeuge to request the Metav IndustryLine Digital Micrometer M302.161 with RB 4.1 output and ratchet stop; our consultants can advise on integration into existing inspection routines Technical Data Article number: M302.161 GTIN: 4054469115078 Category: Messschrauben (Micrometer) eClass: 21170328 ETIM: EC003590 Tariff number: 90173000 Core specifications Measuring range: 0–25 mm Resolution (display): 0.001 mm (0.00005 in) Indicated accuracy: ±0.005 mm Anvil/tip dimensions: 6.5 x 3.5 x 0.5 mm Weight: 0.7 kg Features Digital display with ON/OFF, ABS/INC, UNIT and SET buttons Data output: RB 4.1 interface Ratchet stop for consistent measuring force Frame painted; measuring drum matt‑chrome Designed for crimp‑height and groove measurements FAQ What measuring range and resolution does this micrometer offer? The Digital Micrometer M302.161 covers 0–25 mm and displays readings to 0.001 mm, making it suitable for small, precise measurements such as crimp heights. Can measurement data be exported to a PC or data logger? Yes, the instrument provides an RB 4.1 data output for connection to compatible data acquisition systems, allowing automated transfer of readings and integration into inspection software. How does the ratchet stop improve measurement quality? The ratchet stop ensures a uniform measuring force at closure, reducing operator‑induced variation and improving repeatability for serial inspections. Is the instrument suitable for measuring grooves and crimped terminals? Yes. The supplied tip is shaped for narrow grooves (6.5 x 3.5 x 0.5 mm), enabling accurate point contact for crimp‑height and slot depth assessments in small components. Which materials and construction details support workshop use? The micrometer has a painted frame and a matt‑chrome measuring drum for durable, corrosion‑resistant handling and a stable feel during precise adjustments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer With 20mm Anvil, Non-Rotating Spindle, ISO 17025 Calibrated Certificate - Microtech Metrology
Benefit from traceable ISO 17025 calibration, sub‑micrometre display resolution and a robust non‑rotating spindle to secure repeatable external measurements. Order the instrument through Metav Werkzeuge or contact the consultants for tailored specification or calibration advice. Micrometer — digital outside micrometer, 0–25 mm, 0.001 mm resolution (Microtech Metrology) The micrometer is a compact digital instrument for precise external measurement on workshop components and inspection benches, equipped with 20 mm anvil faces and a non‑rotating spindle for consistent contact geometry. Digital display, 0.001 mm resolution ISO 17025 calibration certificate included 20 mm anvil faces, non-rotating spindle Reduce rework with consistent high‑precision readings A digital measuring instrument with 0.001 mm readout and a verified accuracy of ±0.004 mm shortens inspection cycles by eliminating ambiguous readings. The high display resolution supports fine adjustment during setup and final inspection, while the clear control layout (0/MODE, SET, UNIT, HOLD) reduces input errors. For production environments where small deviations cause costly rework, the combination of fine resolution and stable contact mechanics improves process reliability and reduces scrap rates. Reliable contact geometry for repeatable measurements The micrometer’s 20 mm anvil faces and non‑rotating spindle deliver a stable measuring interface that resists misalignment over repeated cycles. Mechanical stability translates into fewer operator‑dependent variances and smoother hand‑off between measuring stations. The device’s robust contact design is particularly advantageous for routinely measured diameters and thicknesses on turned or milled parts, where identical seating and pressure are essential to reproduceable results. Traceable calibration and quality‑system readiness Delivered with an ISO 17025 calibration certificate, the instrument supports accredited measurement chains and audit requirements. Traceable calibration documentation facilitates integration into quality management systems and simplifies acceptance testing during incoming inspection. Such documented conformity is beneficial for batch release decisions and for maintaining measurement standards across multiple workstations or departments. Practical features for efficient inspection workflows The digital interface provides rapid switching between units and a data‑hold function for transient measurements, enabling faster throughput at inspection points. The compact measuring range of 0–25 mm suits precision tasks in toolmaking, component finishing and laboratory checks where short‑span accuracy is paramount. The instrument’s construction balances ergonomics with rigidity, enabling single‑handed operation without sacrificing measurement control or stability. Contact Metav Werkzeuge for advice on integrating the Microtech Metrology digital micrometer into existing quality routines or for guidance on calibration intervals and traceability documentation Technical data Article number: 110780251 GTIN: 4061905457708 Manufacturer: Microtech Metrology Core specifications Measuring range: 0–25 mm Resolution: 0.001 mm Accuracy: ±0.004 mm Features Digital display with 0/MODE, SET, UNIT and HOLD buttons Measuring faces: anvil Ø20 mm Non‑rotating spindle for consistent contact ISO 17025 calibration certificate supplied Digital measurement instrument for external dimensions FAQ Is the micrometer delivered with a calibration certificate? Yes. The Microtech Metrology digital micrometer is supplied fully calibrated with an ISO 17025 certificate, providing traceable documentation for quality records (SKU 110780251). What measurement range and resolution does the instrument offer? The device covers 0–25 mm with a display resolution of 0.001 mm, suitable for fine workshop and laboratory checks. How does the non‑rotating spindle benefit measurement reproducibility? A non‑rotating spindle ensures identical contact geometry at each measurement, reducing operator‑induced variation and improving reproducibility with the Microtech Metrology micrometer. Which buttons are available on the digital display and what do they do? The display includes 0/MODE, SET, UNIT and HOLD functions to zero the instrument, select measuring modes, switch units and freeze readings for ease of documentation. Is this instrument suitable for production inspection tasks? Yes. The combination of 0.001 mm resolution, ±0.004 mm accuracy and ISO 17025 traceability makes it suitable for routine production inspection and quality assurance. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Digital Micrometer With 60° Cone Tip 0.001mm Resolution, Ratchet, Supplied In Case - Metav IndustryLine
Benefit from precise micro-range measurement with 0–25 mm reach, 0.001 mm resolution and a ratchet stop for reproducible contact — order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M302.165 Digital Micrometer 0–25 mm — 60° cone tip, 0.001 mm resolution (Metav IndustryLine) The M302.165 Digital Micrometer is a micro-range digital measuring instrument tailored for fine mechanical work and component inspection, combining a narrow 60° cone tip with a clear digital readout for quick, reliable measurements. Digital display with 0.001 mm resolution Ratchet stop for consistent measuring force 60° cone tip for narrow features Supplied in protective case Precision where tiny tolerances matter The micrometer delivers a resolution of 0.001 mm (1 µm) with a stated accuracy of ±0.005 mm, making it suitable for high-precision bench tasks in watchmaking, instrument manufacture and fine mechanical assembly. The electronic readout provides an additional inch option equivalent to 0.00005 in, allowing seamless switching between units. The inclusion of a ratchet stop ensures constant contact force, reducing operator-induced variance and improving repeatability when identical conditions must be reproduced across batches. Designed for delicate features and everyday workshop use A 60° cone tip enables measurement of narrow grooves, small bores and turned features that are difficult to access with flat anvils. The instrument's construction — a frame painted for corrosion resistance and a measuring drum matt chrome-plated for smooth spindle action — supports both delicate handling and robust daily use. At approximately 0.7 kg the tool balances stability and manoeuvrability, and the supplied protective case simplifies transport and storage while shielding the instrument from shocks and contamination between uses. Data handling and productivity benefits for the production floor Equipped with a clear digital display and function keys (ON/OFF, ABS/INC, UNIT, SET), the device facilitates fast readings and mode changes without interrupting workflow. The integrated RB 4.1 data output provides a direct route for digital capture, enabling inspection data to be recorded and analysed centrally to reduce rework and improve quality traceability. For process-oriented shops, the combination of fine resolution, reliable contact control and data export streamlines quality checks and shortens the feedback loop between measurement and correction. For precise micro-measurement tasks, request the Metav IndustryLine M302.165 from Metav Werkzeuge or contact our Emmerich team for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M302.165 GTIN: 4054469115085 Manufacturer: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution: 0.001 mm / 0.00005 in Accuracy: ±0.005 mm Weight: 0.7 kg Data output: RB 4.1 Special features 60° cone tip Ratchet stop Digital display with ON/OFF, ABS/INC, UNIT, SET Frame painted Measuring drum matt chrome-plated Supplied in protective case FAQ What resolution and accuracy can be expected from this micrometer? The M302.165 offers a resolution of 0.001 mm and a stated accuracy of ±0.005 mm, suitable for fine mechanical inspection tasks. Is the instrument suitable for measuring small bores and grooves? Yes, the 60° cone tip is designed to access narrow features and small internal profiles that standard flat anvils cannot reliably reach. Can measurement data be exported to a computer or SPC system? The micrometer supports data transfer via RB 4.1, enabling straightforward connection to data-logging or SPC systems for documentation and analysis. Does the delivery include any protective packaging? The instrument is supplied in a protective case to simplify storage and protect the tool during transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer With Colour Touchscreen Display, Wireless USB, IP65, ISO17025 Calibrated - Microtech Metrology
Take advantage of the combination of high measurement accuracy, Industry 4.0 data connectivity and robust CNC‑machined construction for dependable quality control and easy integration into production systems. Order this instrument directly via Metav Werkzeuge or request advice from our consultants for application-specific configuration. Measuring Micrometer with Colour Touchscreen and Wireless + USB Connectivity — Microtech Metrology The Measuring Micrometer is a precision digital micrometer designed for workshop and laboratory measurements up to 25 mm, offering calibrated traceability and seamless data transfer for modern production environments. ISO 17025 calibration included Wireless and USB data transfer CNC-machined aluminium housing Traceable precision for micro‑scale measurements The micrometer delivers a reliable accuracy of 0.003 mm with a reading step of 0.0001 mm, making it suitable where repeatability and traceability matter. Classified in the Micro range (measuring range up to 25 mm), this instrument is optimised for fine mechanical work and quality control tasks that demand minimal uncertainty. A full ISO 17025 calibration certificate (Ilac MRA) is supplied, providing documented conformity to recognised laboratory standards and simplifying incoming inspection procedures or audit trails. Modern data handling that speeds up quality workflows Integration into digital processes is supported by multiple transfer modes: Wireless to the MDS app (Windows, Android, iOS, macOS), USB HID, and wireless HID variants, plus an optional MODBUS RTU output for industrial networks. The built‑in memory manager stores 2000 values in a folders system with statistics mode and easy memory export, reducing manual recording and accelerating statistical process control. For production lines, the measuring hub enables wireless synchronisation and 2D graphing—functionality that shortens inspection cycles and feeds live data into SPC or IIoT systems. Built to withstand workshop conditions and stay simple to use A solid, CNC‑machined aluminium housing provides mechanical stability and thermal mass for consistent readings, while IP65 protection keeps dust and splash water out of sensitive electronics. The 2.4" colour touchscreen offers an intuitive interface for mode selection—Go/NoGo, Max/Min, formula input, timer and temperature correction—so operators can work quickly without complex manuals. The instrument’s anvils (6.5 x 0.75 mm) and ergonomic frame ensure comfortable handling for repetitive measurements, improving throughput with lower operator fatigue. Practical benefits in everyday inspection and production Designed for hands‑on metrology, the unit supports common shopfloor routines such as dimension checks, comparative testing and batch documentation. The instrument’s 2000‑value memory and versatile data output mean measurement results can be archived or forwarded to CAQ systems without intermediate typing. For small series or maintenance tasks the combination of a fast colour display and robust housing reduces downtime; for serial inspection it bridges manual gauging and automated data acquisition, offering a measurable productivity gain. Contact Metav Werkzeuge for expert guidance on integrating this Microtech measuring micrometer into inspection routines and for fast delivery from Emmerich. Technical Data Article number: 110660258 GTIN: 4061905456718 Manufacturer: Microtech Metrology Facts Measuring range: 0–25 mm Reading step: 0.0001 mm Accuracy: 0.003 mm Memory: 2000 values IP rating: IP65 Special features Colour 2.4" touchscreen display Wireless and USB data transfer (multiple HID modes) Optional MODBUS RTU (RS‑485) CNC‑machined aluminium housing Anvils 6.5 x 0.75 mm Functions: Go/NoGo, Max/Min, formula, timer, linear & temperature correction Measuring hub for wireless instrument connection and 2D graphing Calibration certificate included (ISO 17025, Ilac MRA) FAQ How accurate is the measuring system and is it certified? The measuring system offers an accuracy of 0.003 mm and the supplied measuring micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA) for traceable results. Which data outputs are available for process integration? Data can be transferred wirelessly to the MDS app (Windows, Android, iOS, macOS), via USB HID and wireless HID modes; an optional MODBUS RTU interface is available for direct industrial connections. How many measurements can the instrument store locally? The built‑in memory manager holds up to 2000 values organised in folders, with statistics mode and easy transfer for archive or SPC use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Digital Micrometer With Large Anvil 0.01mm Resolution Ratchet, Case - Metav IndustryLine
Take advantage of precise thickness measurement, a large 50 × 14 mm anvil and a repeatable measuring force for consistent results in cutter and small-part inspection; order directly via Metav Werkzeuge or consult our specialists for configuration advice. M302.151.C — Metav IndustryLine digital micrometer with large anvil (0–25 mm, 0.01 mm) The M302.151.C is a digital micrometer designed to measure cutter edges, discs and compact workpieces with a wide anvil and workshop-grade data output for process integration. Large anvil for cutter thickness Resolution 0.01 mm (0.00005 in) Ratchet stop for repeatable force RB 4.1 data output included Precision where it counts The instrument delivers a resolution of 0.01 mm combined with a verified accuracy of ±0.005 mm, providing the control expected in metalworking and toolmaking. The large anvil (50 × 14 mm) is specifically beneficial when checking disc cutters, milling tool bodies or other flattened geometries: contact area is increased, reducing local deformation and giving a truer wall‑thickness or cutter‑thickness reading. The hardened, matt‑chrome measuring drum and the lacquered frame keep mechanical wear low while supporting stable measurements over repeated cycles. Repeatable measurements for production workflows A mechanical ratchet stop ensures a uniform measuring force, removing a common source of operator variability and improving reproducibility during serial inspections. Combined with the robust frame and sizeable anvil, the instrument is well suited to short‑run quality checks and workshop throughput tasks where consistent results are essential. This makes the tool a practical choice for maintenance shops, small production lines and toolrooms that require fast, repeatable checks without elaborate fixturing. Seamless data capture and digital convenience The digital display is equipped with ON/OFF, ABS/INC, UNIT and SET controls for straightforward operation, while the RB 4.1 data output allows transfer of measured values to data loggers or SPC systems, supporting traceability and process documentation. The clear numeric readout speeds up inspection steps and reduces transcription errors; the instrument therefore integrates effectively into digitised quality routines. Workshop robustness and user benefits Constructed with a lacquered frame and a matt‑chrome measuring drum, the micrometer balances durability with ease of handling. The large anvil and ergonomic form factor make it practical for measuring cutters, shims and other small components without additional fixtures. Delivered in a protective case for transport, the instrument is ready for workshop use and safe storage between measuring tasks. For workshop-ready precision and reliable data transfer, request the Metav IndustryLine digital micrometer from Metav Werkzeuge or ask our specialists for integration options—info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M302.151.C GTIN: 4054469115009 Category: micrometers Manufacturer: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution: 0.01 mm (0.00005 in) Accuracy: ±0.005 mm Anvil size: 50 × 14 mm ECLASS: 21170328 ETIM: EC003590 HS tariff code: 90173000 Special features Digital display with ON/OFF, ABS/INC, UNIT and SET buttons RB 4.1 data output for external logging Ratchet stop for defined measuring force Frame lacquered; measuring drum matt chrome‑plated Delivered in a transport case FAQ Is this micrometer suitable for measuring cutter thickness? Yes. The M302.151.C features a large anvil (50 × 14 mm) and a ratchet stop, making it suitable for measuring disc cutters, thin tool bodies and other flat geometries where a larger contact area reduces local deformation. What are the measuring range and the smallest readable step? The instrument covers a measuring range of 0–25 mm with a display resolution of 0.01 mm (0.00005 in) and a stated accuracy of ±0.005 mm, suitable for workshop and toolroom verification tasks. How does the ratchet stop improve measurement consistency? The ratchet stop limits the applied measuring torque, ensuring a consistent contact pressure on each measurement. This reduces operator variability and improves repeatability during serial inspections. Can measurement data be transferred to a PC or logger? Yes. The micrometer provides RB 4.1 data output, enabling connection to compatible data loggers or SPC systems for direct capture of readings and streamlined documentation. What materials and build features ensure durability? The instrument combines a lacquered frame with a matt‑chrome measuring drum, offering resistance to wear in daily workshop use while maintaining smooth spindle operation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer With Offset Measuring Faces, 0.001mm Resolution, Ratchet, Plastic Case - Metav IndustryLine
Compact shop-floor precision with a 0–25 mm measuring range and 0.001 mm resolution enables repeatable control of small components; the hardened, offset faces and integrated ratchet deliver consistent contact force for reliable results. Order the micrometer directly via Metav Werkzeuge or contact their advisors for application guidance. M302.111.C — Digital micrometer (0–25 mm), 0.001 mm resolution, Metav IndustryLine The M302.111.C is a compact, micro‑range digital micrometer with offset measuring faces, designed for fine external measurements in workshops, quality control and precision assembly. Micro range 0–25 mm compact design Resolution 0.001 mm for fine detail Hardened offset faces Ø2 mm, 5 mm long Integrated ratchet and RB 4.1 data output Precision where small margins matter The M302.111.C sits in the micro range (max. 10–100 mm), making it ideal for small-part metrology where access and stiffness are both critical. With a resolution of 0.001 mm and an indicated accuracy of ±0.005 mm, the instrument provides the granular readback required for component acceptance tests and first-article inspections. The compact geometry reduces lever effects and improves repeatability when measuring narrow features or tight grooves, so inspection routines deliver meaningful, comparable data across shifts. Consistent contact for repeatable readings A dedicated ratchet stop and a fine spindle pitch (0.5 mm) ensure reproducible contact pressure and delicate final approach, reducing operator‑induced variation. The offset measuring faces (Ø2 mm, 5 mm long) are hardened, which preserves face geometry under frequent use and resists wear when measuring small-diameter parts. These features combine to make the device particularly useful for tasks that demand stability over many cycles, such as batch sampling in production or repetitive assembly checks. Digital readout that fits the production workflow The clear digital display includes ON/OFF, ABS/INC, UNIT and SET functions, allowing fast toggling between measurement modes and units. For integration into statistical process control, the tool offers RB 4.1 data output for direct transfer of readings to data loggers or inspection software, reducing transcription errors and speeding up documentation. The electronic interface supports modern data practices on the shop floor without compromising the straightforward operation expected from mechanical micrometers. Built for everyday workshop use Constructed on a painted frame that guards against surface damage, the instrument is supplied in a transport case for secure handling and storage between shifts. The compact form factor and offset faces make measurements in confined areas easier, while the combination of hardened contacts and an ergonomic ratchet contributes to long service life and consistently reliable measurements. Metav’s distribution from Emmerich provides a practical supply chain and product support for workshops and specialist suppliers alike. For application advice or to arrange purchase of the Metav IndustryLine digital micrometer M302.111.C with RB 4.1 output, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M302.111.C GTIN: 4054469114569 Category: Micrometres eClass: 21170328 ETIM: EC003590 Label: Digital micrometer with offset measuring faces Facts Measuring range: 0–25 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Spindle pitch: 0.5 mm Display functions: ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Special features Offset measuring faces, Ø2 mm, 5 mm long Hardened measuring faces Ratchet stop for constant measuring force Painted frame Supplied in transport case Digital readout FAQ How accurate is the instrument? The M302.111.C digital micrometer provides a resolution of 0.001 mm and an indicated accuracy of ±0.005 mm, suitable for detailed workshop and QA checks on small components. Can the micrometer measure in confined or recessed areas? Yes. The offset measuring faces (Ø2 mm, 5 mm long) are designed to reach into narrow features and recessed surfaces while maintaining stable contact geometry. Is it possible to export measurements electronically? Measurements can be exported via RB 4.1 output, allowing direct transfer from the Metav IndustryLine digital micrometer to inspection systems or data loggers for SPC and documentation. What ensures repeatable contact pressure during measurement? The integrated ratchet stop and the fine spindle pitch (0.5 mm) provide consistent contact force and controlled spindle advance, reducing variability between operators. Does the delivery include protective packaging? The instrument is supplied in a transport case to protect the micrometer during storage and transport between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer With Pointed Measuring Faces, Friction Thimble, IP65, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of a workshop-ready instrument that pairs IP65 protection with ISO 17025 calibration, delivering reliable 0–25 mm measurement and repeatable results thanks to a friction thimble and rotating spindle; order directly via Metav Werkzeuge or consult our specialists for application advice. Microtech CertiMet POINT digital micrometer (0–25 mm, IP65) The CertiMet POINT digital micrometer is a rugged, precision instrument designed for fine incremental measurement of small parts, combining a sealed aluminium housing with a high-resolution digital readout for use in demanding production environments IP65 aluminium housing for workshop use ISO 17025 calibration certificate included Friction thimble for consistent measuring force Pointed measuring faces for small features Digital readout with mm/inch and hold Accurate measurement performance that reduces rework The CertiMet POINT digital micrometer offers a measuring range of 0–25 mm with a display resolution of 0.001 mm and a stated accuracy of ±0.004 mm, making it suitable for precision checks and final inspection steps. The combination of a fine-resolution digital readout and a friction thimble helps to eliminate variability from manual force application, so readings remain consistent across operators. The rotating spindle mechanism supports smooth approach to the measuring faces, which reduces the risk of overshoot and ensures reproducible contact with the workpiece. Built for the production floor with practical, sealed protection A robust aluminium housing with IP65 ingress protection shields the electronics from coolant and dust, enabling use at machine benches and in workshop environments. The pointed measuring faces are designed to access small grooves or fine details, while the digital module provides convenient functions (mm/inch switching, hold, origin and set options) that speed up routine checks. These practical features lower cycle time for quality control tasks and integrate easily into established measuring procedures without special handling. Traceable calibration and quality-assurance integration Delivered with an ISO 17025 calibration certificate, the instrument supports traceability and can be included directly in official quality documentation. The calibration certificate confirms measurement conformity and simplifies first-article inspection and audit processes. For facilities that maintain formal measurement systems, the micrometer’s documented accuracy and calibration status reduce administrative effort when updating inspection records and support robust quality workflows. For traceable, workshop-ready measurement with Microtech’s CertiMet POINT—backed by ISO 17025 calibration—contact Metav Werkzeuge in Emmerich for tailored technical advice or ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 110450251 GTIN: 4061905040641 Manufacturer: Microtech Metrology Facts Measuring range: 0–25 mm Resolution: 0.001 mm Accuracy: ±0.004 mm Protection class: IP65 Special features CertiMet POINT digital micrometer series Digital readout with ON/ABS, SET, HOLD and mm/inch functions Friction thimble for repeatable measuring force Pointed measuring faces (spitz) Rotating spindle for controlled approach Aluminium housing suitable for workshop use Calibration certificate included (ISO 17025 (Ilac MRA)) FAQ Is the instrument delivered calibrated? The micrometer is supplied fully calibrated with an ISO 17025 certificate, ensuring traceability and suitability for documented quality processes. What is the smallest increment that can be read? The digital readout provides a resolution of 0.001 mm, enabling fine incremental measurement for precision checks. Can the micrometer be used at machine benches where coolant is present? Yes, the device features an IP65-rated aluminium housing that protects the electronics from dust and water jets typical of workshop environments. Which measuring faces are fitted and what are they for? Pointed measuring faces are fitted to access small grooves and fine features where flat anvils would not reach, making the micrometer appropriate for delicate detail work. What display functions are available on the digital module? The digital unit offers mm/inch selection, hold, origin/set functionality and ON/ABS operation to facilitate rapid recording and comparison during inspection routines. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Digital Micrometer With Ratchet, 0.001mm Resolution, Locking Spindle, Supplied In Case - Metav IndustryLine
Taking advantage of a high‑resolution digital readout and a secure ratchet stop, this micrometer delivers repeatable measurements for fine workshop and laboratory work; its matt‑chrome measuring drum and hardened measuring faces ensure long‑term durability. Order directly via Metav Werkzeuge or request tailored advice from our consultants. Digital micrometer M302.254 — 0–25 mm, 0.001 mm resolution (Metav IndustryLine) The Digital micrometer M302.254 is a compact, high‑precision instrument for external measurements up to 25 mm, equipped with a 0.001 mm digital display and practical function keys for reliable readings in the workshop and inspection room 0.001 mm digital resolution Ratchet stop for consistent measuring force Matt‑chrome measuring drum and painted frame Supplied in protective case Dependable accuracy for production and inspection The instrument features a digital readout with ON/OFF/SET and ABS/INC/UNIT controls that simplify frequent conversions and zeroing, while the 0.001 mm display resolution supports precise dimensioning tasks. Conforming to DIN 863, the device meets recognised mechanical micrometer standards and is suitable where sub‑millimetre repeatability is required. This technical setup reduces reading errors and helps sustain a consistent inspection routine, making the tool well suited to quality control and small‑part production where objective measurement data are essential. Repeatable contact and robust handling for routine use A built‑in ratchet stop guarantees a uniform measuring force, preventing over‑tightening and reducing operator‑dependent variation; this directly improves reproducibility for serial checks. The frame is painted for corrosion protection and the matt‑chrome measuring drum provides a wear‑resistant surface for frequent adjustment. The measuring faces are hardened, Ø 6.5 mm, offering durable contact points for external dimension checks and resisting deformation under regular load. As a compact 0–25 mm tool, it falls into the micro class of calipers and micrometres, delivering high precision in a small footprint for watchmaking, precision engineering and fine mechanical assemblies. Practical features that speed daily workflows Ergonomic design and straightforward function keys allow quick toggling between absolute and incremental modes and easy unit selection, which shortens cycle times during repetitive measurements. The instrument is supplied in a protective case to safeguard calibration and finish during transport and storage. Its configuration balances sensitivity and robustness: the hardened faces and solid spindle mechanics give confidence when measuring delicate components, while the digital interface supports integration into inspection routines that demand clear, repeatable numeric results. Contact Metav Werkzeuge for personalised advice on integrating the Metav IndustryLine digital micrometer M302.254 into measurement routines and to arrange a purchase from Emmerich’s central stock Technical data Article number: M302.254 GTIN: 4054469151724 Category: Micrometers Facts Measuring range: 0–25 mm Resolution: 0.001 mm Measuring faces: Ø 6.5 mm Tariff number: 90173000 Special features Digital display with ON/OFF/SET and ABS/INC/UNIT keys Ratchet stop for consistent measuring force Frame painted; measuring drum matt‑chrome Conforms to DIN 863 Supplied in a protective case FAQ What measurement range and resolution does the micrometer offer? The Digital micrometer M302.254 provides a measuring range of 0–25 mm with a resolution of 0.001 mm, suitable for fine external dimension control. Are the measuring faces durable for frequent use? Yes — the micrometer is equipped with hardened measuring faces (Ø 6.5 mm) that maintain accuracy under repeated contact and resist wear during serial inspections. How does the ratchet stop improve measurement consistency? The integrated ratchet stop limits applied spindle pressure, ensuring a uniform measuring force and improved repeatability when using the M302.254 for batch checks. Which standards does this instrument comply with? The instrument is manufactured in accordance with DIN 863, providing standardised mechanical characteristics for micrometer usage. Is the micrometer ready for workshop transport? The micrometer is supplied in a protective case for safe transport and storage, preserving the instrument’s finish and mechanical setting Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Micrometer With Ratchet, Cylinder And Flat Anvils, 0.001mm Resolution, Case - Metav IndustryLine
Take advantage of repeatable contact control, two interchangeable measuring inserts and an integrated RB 4.1 data output to streamline inspection routines; order the micrometer directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Digital Uni Micrometer M302.050.C – digital micrometer with two interchangeable inserts, 0–25 mm The Digital Uni Micrometer M302.050.C is a compact 0–25 mm digital micrometer designed for precise external, step and groove measurements in workshops and quality-control stations. Digital display with ABS/INC and unit selection Two interchangeable measuring inserts included Ratchet spindle for consistent measuring pressure Supplied in protective transport case Consistent precision for routine quality control The instrument delivers a resolution of 0.001 mm and an operational accuracy of ±0.004 mm, making it suitable for demanding workshop checks and incoming inspection. The integrated ratchet spindle with a 0.5 mm pitch ensures consistent contact force, reducing variation from operator pressure and improving repeatability. Hardened measuring faces and a 6.5 mm face diameter provide durable contact surfaces that preserve accuracy over time. Adaptable measuring options for diverse tasks Equipped with a cylinder insert (Ø 3.0 mm) and a flat insert (d = 1.5 mm, width 5 mm), the tool supports measurements on tube walls, grooves and step depths without the need for additional fixtures. The digital readout features ON/OFF, ABS/INC, UNIT and SET buttons for fast unit switching and zeroing. For integration into data workflows, the micrometer offers an RB 4.1 data output so measurements can be recorded directly into inspection software or data loggers. Robust design for everyday workshop use With a compact 0–25 mm range and a weight of approximately 0.6 kg, the device balances manoeuvrability with solid build quality for handheld operation. Supplied in a protective transport case, the instrument is ready for mobile measuring tasks and safe storage. The digital electronics and mechanical features were selected to minimise downtime and support efficient measurement routines in production environments. Choose the Metav IndustryLine Digital Uni Micrometer for repeatable 0–25 mm measurements and contact Metav Werkzeuge in Emmerich for tailored advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M302.050.C GTIN: 4054469157955 Customs tariff number: 90173000 Facts Measuring range: 0–25 mm Resolution: 0.001 mm Resolution (inch): 0.00005 in Accuracy: ±0.004 mm Weight: 0.6 kg Spindle pitch: 0.5 mm Measuring face diameter: 6.5 mm Special features Digital display with ON/OFF, ABS/INC, UNIT and SET buttons RB 4.1 data output Ratchet spindle for consistent measuring pressure Includes cylinder insert Ø 3.0 mm and flat insert (d = 1.5 mm, width 5 mm) Hardened measuring faces Supplied in protective transport case Category: Micrometers FAQ What accuracy can be expected from this micrometer? The Digital Uni Micrometer M302.050.C achieves an accuracy of approximately ±0.004 mm, providing reliable results for standard workshop and inspection tasks. Which inserts are supplied with the micrometer? The micrometer is delivered with a cylinder insert (Ø 3.0 mm) and a flat insert (d = 1.5 mm, width 5 mm) to cover tube wall, groove and step measurements. Can measurement data be exported to a PC? Yes, the micrometer is equipped with an RB 4.1 data output, enabling direct transfer of readings to compatible data collection systems. Is the measuring face material hardened? The measuring faces are hardened, providing wear resistance and long-term stability for repeated contact measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Pipe Wall Thickness Gauge 1.8mm Probe 0.001mm Resolution Ratchet, Matt Chrome Finish, Supplied in Case - Metav IndustryLine
Combine high-resolution measurement with a robust ratchet mechanism and RB 4.1 data output to ensure repeatable tube‑wall inspections; order directly via Metav Werkzeuge or consult our specialists for application advice. Digital Tube Wall Micrometre M302.153.C — digital micrometre for tube‑wall thickness, 0–25 mm range, 0.001 mm resolution The Digital Tube Wall Micrometre M302.153.C is a purpose‑built measuring instrument for accurate tube‑wall thickness checks in workshop and quality‑control environments. Resolution 0.001 mm readout Measuring range 0–25 mm RB 4.1 data output and ratchet Precise, traceable tube‑wall measurement for production control This digital micrometre delivers a resolution of 0.001 mm and an indicated accuracy of ±0.004 mm, which makes it suitable for fine tube‑wall inspections where repeatability matters. The instrument’s slender measuring pin allows thickness assessments from 1.8 mm upwards, enabling checks on thin‑walled tubing and small‑section components. The clear digital display with ON/OFF, ABS/INC, UNIT and SET controls supports quick unit changes and zeroing, reducing interpretation errors and accelerating inspection cycles while maintaining objective measurement data. Consistent contact force and handling for reliable results A built‑in ratchet ensures uniform measuring force across repeated readings, reducing operator‑induced variation and improving statistical control in batch inspections. The frame is painted for workshop resilience and the measuring drum is matt chrome‑plated, combining ergonomic handling with corrosion resistance. Hardened measuring faces are incorporated to preserve accuracy under frequent use; the result is a stable instrument that sustains calibration intervals and lowers lifetime measurement drift. Digital interface for data capture and quality documentation Equipped with an RB 4.1 data output, this micrometre integrates into data‑collection workflows for documented quality traces and SPC systems. Measurements can be transferred directly into inspection logs, eliminating manual transcription and accelerating approval loops. The combination of digital readout and compatible output supports rational decision‑making in production and laboratory contexts by providing measurable evidence for tolerances and conformity checks. Designed for workshop durability and practical use Weighing approximately 0.6 kg, the instrument balances robust construction with manageable handling at the bench. Delivery includes a transport case to protect the micrometre during storage and transit, and the compact dimensions suit both bench use and mobile inspection tasks. The device is intended for repeated, everyday use in metalworking and tubing production where consistent wall‑thickness verification is required; maintenance is straightforward, and routine cleaning and protection of the measuring faces extend service life. For application guidance or to order the Metav IndustryLine digital tube wall micrometre directly from Emmerich, contact Metav Werkzeuge to discuss suitability and delivery options. Technical Data Article number: M302.153.C GTIN: 4054469164755 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution: 0.001 mm Specified accuracy: ±0.004 mm Minimum measurable wall thickness: 1.8 mm Weight: 0.6 kg Special features Digital display with ON/OFF, ABS/INC, UNIT, SET buttons RB 4.1 data output for digital logging Ratchet for constant measuring force Painted frame; matt chrome‑plated measuring drum Hardened measuring faces Supplied in a transport case Category: Micrometres (tube‑wall micrometre) FAQ What is the smallest tube‑wall thickness this instrument can measure? The instrument measures tube‑wall thicknesses from 1.8 mm upwards; the slender measuring pin and micrometre geometry are optimised for thin‑walled tubing checks. How accurate is the digital readout? The digital display provides a resolution of 0.001 mm with a stated accuracy of ±0.004 mm, suitable for workshop and quality‑control applications. Can measurements be exported to a PC or data logger? Yes. The unit offers an RB 4.1 data output for direct transfer of readings into compatible data‑collection systems and SPC software. Does the micrometre include a constant‑force mechanism? A built‑in ratchet ensures consistent measuring force, improving repeatability across successive readings. What protection is provided for transport and storage? The micrometre is supplied in a protective transport case to safeguard the instrument and measuring faces during storage and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com