Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
25mm Digital Thimble Micrometer With Carbide Faces, 0.001mm Resolution, Ratchet Stop, DIN 863 - Metav IndustryLine
Take advantage of precise machine integration, 1 µm display resolution and wear‑resistant carbide measuring faces for dependable in‑process inspection; order directly via Metav Werkzeuge or consult our technical team for configuration and delivery. Digital built-in micrometer M302.091.G — 0.001 mm resolution, carbide measuring faces (Metav IndustryLine) The Digital built-in micrometer M302.091.G is a compact, machine‑mountable micrometer designed for high‑precision shop and production measurement with a 12 h7 mounting shank for secure installation Digital display with mm/inch and hold Resolution 0.001 mm for fine measurement Carbide measuring faces for long life Mounting shank 12 h7 for machine fitting Precise measurement that reduces rework and speeds inspection The instrument delivers a resolution of 0.001 mm and a stated accuracy of 0.004 mm, meeting the expectations for fine metrology in small‑part production. Conformity with DIN 863 ensures comparability with established workshop standards. The fine resolution is shown on a three‑button digital display with ON/zero, mm/inch and HOLD functions, enabling quick verification of components and limiting stoppages due to uncertain readings. For assembly and quality control tasks where repeatable measurements shorten cycle time, this inset micrometer gives a measurable productivity uplift. Built for straightforward integration and repeatable force control Designed for machine or fixture integration, the device features a 12 h7 mounting shank and an RB 4 data output for connection to SPC systems or counters, simplifying digital traceability in the production line. A built‑in ratchet mechanism guarantees a consistent measuring force on each contact, reducing operator‑induced variation and improving process stability. Clear data transfer and repeatable actuation together support automated logging and faster decision making on the shop floor. Durable contacts and workshop‑grade construction for long service life Measuring faces are carbide (HM) and plan‑parallel, chosen for wear resistance and dimensional stability under frequent use. The measuring spindle diameter of 6.5 mm and a compact 0–25 mm range place the tool in the micro range for precision tasks on small components, where stiffness and handling are essential. With a practical weight of 0.5 kg and a construction that complies with proven metrology norms, the unit is suitable for continuous inspection routines and robust enough for daily shop use. Metav IndustryLine’s market presence and logistical filter in Emmerich ensure dependable supply and product consistency. Choose Metav IndustryLine’s M302.091.G for accurate machine integration and contact Metav Werkzeuge for tailored configuration and reliable delivery Technical Data Article number: M302.091.G GTIN: 4054469114514 Manufacturer: Metav IndustryLine Norm: DIN 863 eCl@ss: 21170330 ETIM: EC003590 Facts Measuring range: 0–25 mm Resolution: 0.001 mm Accuracy: 0.004 mm Weight: 0.5 kg Measuring spindle: 6.5 mm Special features Carbide measuring faces (HM) Plan‑parallel measuring faces Mounting shank: 12 h7 Digital display with ON/zero, mm/inch, ABS and HOLD Data output: RB 4 Ratchet mechanism for repeatable measuring force FAQ What measuring range does this micrometer cover? The built‑in micrometer covers 0–25 mm, suitable for micro‑range precision checks and small component inspection with Metav IndustryLine quality. What are the resolution and accuracy specifications? Resolution is 0.001 mm and the stated accuracy is 0.004 mm, which supports fine measurement tasks and consistent quality control. How is the unit mounted in fixtures or machines? Mounting is via a 12 h7 shank for secure machine integration; the design suits insertion into dedicated fixtures or automated inspection stations. Can measurement data be exported to a control system? Yes, the device provides an RB 4 data output for connection to counters, SPC interfaces or other data acquisition systems to enable digital traceability. Are the measuring faces suited to heavy use? The measuring faces are carbide (HM) and plan‑parallel, chosen for wear resistance and long‑term dimensional stability under frequent measuring cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Thread Micrometer, Ratchet Thimble, ABS/INC/Unit/Set Display, Rolled Spindle, Case - Metav IndustryLine
Take advantage of precise thread measurement through a combination of high resolution, consistent ratchet control and a robust non-rotating spindle for repeatable results; the tool is supplied without anvils or a setting standard, allowing flexible configuration for specific gauges. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Digital Thread Micrometer M302.191.D — digital readout, 0–25 mm measuring range The Digital Thread Micrometer M302.191.D is a compact, workshop-grade measuring instrument designed for accurate external thread measurement and fine mechanical inspection within a 0–25 mm range. Digital readout with ABS/INC/UNIT/SET Resolution 0.001 mm for fine readings 6.5 mm non-rotating spindle Ratchet stop for consistent measuring Precision where thread geometry matters A digital thread micrometer built for reliable, repeatable results: the instrument combines a 0–25 mm measuring span with a 0.001 mm resolution and a stated accuracy of 0.008 mm, giving a solid technical basis for quality control and short-run inspection tasks. The non-rotating 6.5 mm spindle prevents surface marking and preserves the geometry of delicate threads, while the ratchet stop enforces a uniform measuring force to reduce operator-induced variability. These features translate into fewer re-measurements and a more efficient inspection workflow. Clear readings and data output for documentation The micrometer’s digital display includes ON/OFF, ABS/INC, UNIT and SET keys for straightforward operation and rapid switching between absolute and incremental modes. A dedicated RB 4.1 data output enables integration with data collection systems for traceable measurement records and batch documentation. This combination of a readable display and export capability supports faster decision-making in production and simplifies quality reporting. Robust design for workshop use Engineered for daily use, the device balances compact dimensions with durable mechanics: the non-rotating spindle and ratchet mechanism protect both the workpiece and the measuring faces during repeated cycles. The instrument’s mass of 0.37 kg keeps it easy to handle while still conveying reassuring build quality. Supplied without anvils and without a setting gauge, the micrometer is adaptable to custom measurement setups and calibration standards as required by specific applications. Practical benefits for inspection routines Employing this micrometer reduces process uncertainty: the defined resolution and accuracy support clear pass/fail decisions when checking external threads and small diameters. The digital functions streamline routine tasks, while the consistent measuring force from the ratchet minimises operator error. For workshops seeking a compact, traceable solution, this instrument offers a pragmatic blend of precision and usability. Contact Metav Werkzeuge to discuss how the M302.191.D can be adapted to your inspection process or to request application-specific guidance from our measurement consultants. Technical Data Article number: M302.191.D GTIN: 4054469115146 eClass: 21170328 Category: Messschrauben Measuring range: 0–25 mm Resolution: 0.001 mm Stated accuracy: 0.008 mm Spindle diameter: 6.5 mm Weight: 0.37 kg Display: digital with ON/OFF, ABS/INC, UNIT, SET Data output: RB 4.1 Delivery: without anvils Spindle: non-rotating Ratchet stop: included FAQ What measuring range does the micrometer cover? The micrometer measures from 0 to 25 mm and is optimised for small external thread and diameter checks. Is a calibration certificate supplied with the device? The product is supplied without a setting gauge; calibration details depend on the selected service—please enquire for calibration options. How fine are the measurements on this instrument? The instrument provides a resolution of 0.001 mm with a stated accuracy of 0.008 mm, suitable for precise workshop inspection. Can measurement data be exported to a PC or SPC system? Yes. The micrometer offers an RB 4.1 data output for straightforward integration into data acquisition or SPC setups. Does the device include replaceable anvils? The device is supplied without anvils, allowing selection of application-specific measuring contacts if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Digital Universal Micrometer With 7 Interchangeable Anvils, 0.001mm Resolution, Ratchet, Case - Metav IndustryLine
Take advantage of high-resolution measurement (0.001 mm) combined with a non-rotating spindle and a set of seven specialised measuring inserts for flexible workshop use; supplied ready for transport and data capture via RB 4.1 — order or request advice through Metav Werkzeuge for seamless integration into production. Digital Uni-Micrometer M302.040.D – digital micrometer with 0–25 mm range and 0.001 mm resolution (Metav IndustryLine) Digital Uni-Micrometer M302.040.D is a compact, data-capable micrometer designed for precise dimensional checks in toolrooms, inspection benches and production control. Resolution 0.001 mm for micrometre-accurate control Non-rotating spindle for repeatable surface contact Includes 7 pairs of special measuring inserts RB 4.1 data output for process documentation Precision that supports reliable quality control The Digital Uni-Micrometer M302.040.D combines a fine resolution of 0.001 mm with a stated measurement accuracy of ±0.008 mm, making it suitable where sub-millimetre repeatability is essential. The 0–25 mm measuring range places this instrument in the compact segment for fine workshop and toolroom tasks, offering an excellent balance of reach and stiffness for everyday inspection work. Clear digital readout and selectable units improve readability and reduce transcription errors during standardised checks. Robust construction for repeated industrial use Built with a lacquered frame and a matt-chrome measuring drum, the instrument resists wear on the surfaces most exposed during handling. A non-rotating spindle reduces the risk of surface marking and ensures consistent contact geometry, while the integrated ratchet stop provides reproducible measuring force to lower operator-induced variation. The micrometer weighs approximately 0.6 kg, and is supplied with 7 pairs of special measuring inserts, extending capability to diverse part geometries. Delivery in a transport case protects the instrument during storage and transit. Ready for digital workflows and traceable data capture The device features a digital display with ON/OFF, ABS/INC, UNIT and SET functions for intuitive operation; measurement data can be exported through the RB 4.1 interface to inspection software or data loggers, simplifying quality documentation and statistical process control. This connectivity supports faster data collection and reduces manual entry errors, which in turn improves throughput in inspection routines and helps maintain consistent production quality. Practical handling, serviceability and workplace benefits Ergonomic design and the ratchet mechanism make repetitive measurements less fatiguing and more consistent, while the set of specialised inserts allows adaptation to grooves, steps and small features without improvised fixtures. Routine maintenance is straightforward: keep contact faces clean, protect the spindle and store the instrument in its transport case when not in use. The product is supplied according to the manufacturer’s factory standard (Werksnorm) and arrives ready for integration into workshop measurement routines. Contact Metav Werkzeuge in Emmerich for application advice, integration support and technical datasheets relating to this Metav IndustryLine micrometer Technical data Article number: M302.040.D GTIN: 4054469114071 Label: Digital Uni-Micrometer +7 Einsätze, 0–25 mm, spindle non-rotating, resolution 0.001 Facts Measuring range: 0–25 mm Resolution: 0.001 mm (0.00005 in) Accuracy: ±0.008 mm Weight: 0.6 kg Measuring spindle diameter: 6.5 mm Data output: RB 4.1 Tariff number: 90173000 Special features Frame lacquered, measuring drum matt chrome Non-rotating measuring spindle Ratchet stop for reproducible force Digital display with ON/OFF, ABS/INC, UNIT, SET Includes 7 pairs of special measuring inserts Supplied in a transport case Norm: Werksnorm eClass: 21170328 ETIM: EC003590 FAQ What resolution does the micrometer offer? The instrument provides a resolution of 0.001 mm (display step 0.00005 in) for precise readings. Is there a data output for measurement recording? Yes, the micrometer supports RB 4.1 data output for direct transfer to inspection systems or data loggers. Are measuring inserts included? The micrometer is supplied with 7 pairs of special measuring inserts to suit a range of part geometries. Does the spindle rotate during measurement? No, the device features a non-rotating spindle to improve contact reproducibility and minimise surface marking. How is the micrometer delivered? The instrument is delivered protected in a transport case to safeguard it during handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Disc Micrometer With Ø20mm Anvil, Ratchet Stop, Painted Frame, Matt Chrome Thimble - Metav IndustryLine
Combining a compact 0–25 mm measuring range with Ø20 mm disc faces and ±0.004 mm accuracy, this instrument is tailored for repeatable, fine‑tolerance checks in precision workshops. Order the M309.250 directly via Metav Werkzeuge or consult their specialists for integration guidance. M309.250 Disc‑Face Outside Micrometer — 0–25 mm, Ø20 mm faces (Metav IndustryLine) The M309.250 is a compact disc‑face outside micrometer designed for precise dimensional checks on small parts and assemblies in fine engineering and watchmaking environments. 0–25 mm measuring range Ø20 mm disc measuring faces High accuracy ±0.004 mm Ratchet stop for reproducible pressure Precision and repeatability for fine engineering The instrument delivers a clear technical advantage through its combination of high resolution and low measurement error: analogue reading 0.01 mm paired with a verified accuracy of ±0.004 mm ensures reliable results when documenting component dimensions. The micrometer’s non‑rotating spindle reduces the risk of marking delicate surfaces while the ratchet stop enforces a consistent measuring force, lowering operator‑induced scatter. These characteristics make the tool particularly suited to tasks where traceable repeatability and short‑term control measurements are required in production and inspection routines. Compact design that supports delicate workpieces Classified in the micro range (max. measuring span within 10–100 mm), this device is optimised for short‑reach applications where stiffness and manoeuvrability matter most. The small frame and Ø20 mm disc faces keep the measuring points rigid and minimise lever effects, which benefits measurements on small shafts, rings and precision fittings. A matt‑chromed thimble enhances legibility under workshop lighting, while the painted frame offers corrosion protection and a tactile surface for steady hand control. The combination of compact geometry and robust finish supports frequent handling without sacrificing dimensional stability. Practical use and process integration As an analogue outside micrometer, the unit integrates into established inspection workflows with minimal training: readings are immediate, no power source is required and maintenance is limited to routine cleaning and lubrication of the spindle thread. The instrument’s construction—painted frame and matt‑chromed thimble—balances durability with tactile feedback for repetitive checks. Its modest mass aids single‑handed operation while the ratchet mechanism protects delicate parts from over‑torque. For quality assurance, results can be logged manually or transferred into existing documentation systems. Delivery and workshop readiness The micrometer is supplied ready for transport and protected against transit damage by delivery in a purpose case. The combination of compact footprint and straightforward handling reduces setup time at inspection stations and simplifies storage. Given its technical specification—fine resolution, ±0.004 mm accuracy and a 0–25 mm measuring range—the instrument supports high‑precision tasks in toolrooms, calibration benches and small‑parts production where reproducible dimensional control underpins overall product quality. For reliable small‑part measurement and consistent workshop performance, choose the Metav IndustryLine M309.250 and contact Metav Werkzeuge in Emmerich for tailored procurement advice. Technical data Article number: M309.250 GTIN: 4054469118697 eClass: 21170328 ETIM: EC003590 Customs tariff number: 90173000 Facts Measuring range: 0–25 mm Resolution (reading): 0.01 mm Accuracy: ±0.004 mm Measuring face diameter: Ø20 mm Weight: 0.5 kg Special features Analogue outside micrometer Frame: painted Thimble: matt chrome Non‑rotating spindle Ratchet stop for reproducible measuring force Supplied in a transport case FAQ How precise is the micrometer in typical use? The M309.250 provides an analogue reading to 0.01 mm with an indicated accuracy of ±0.004 mm, making it suitable for fine workshop checks and short‑range inspection tasks. What measuring faces does the instrument use? The micrometer is fitted with Ø20 mm disc measuring faces, which give a stable contact area for small rings, shafts and flat surfaces while keeping the contact geometry compact. Does the spindle rotate during measurement? No; the spindle is non‑rotating, which reduces surface abrasion on delicate parts and improves repeatability when combined with the ratchet stop. Is the device delivered ready for workshop use? Delivery includes a transport case for protection in transit. The product data does not specify a factory calibration certificate in the available information. Which applications suit this micrometer best? Its classification in the micro measuring range and compact design make it ideal for watchmaking, precision engineering, toolroom checks and small‑parts production where tight tolerances must be verified. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Extension Ø15.5mm For Rod Internal Micrometer Sets - Metav IndustryLine
Benefit from a compact, precision extension that increases measuring reach while preserving alignment: 25 mm length and Ø 15.5 mm shank ensure reliable fit with compatible measuring sets, and the light weight supports easy handling in repetitive inspection tasks. Order the part directly via Metav Werkzeuge or contact the consultants for application guidance. Extension 25 mm Ø 15.5 mm (M310.061.2) – Measuring-instrument accessory, Metav IndustryLine The Extension 25 mm Ø 15.5 mm (M310.061.2) is an accessory designed to extend the measuring reach of rod-style internal measuring sets for confined or recessed bores. 25 mm extension length Ø 15.5 mm shank for secure fit Compatible with models 310.059/60/61/64 Lightweight at 0.1 kg Increased reach with unchanged measuring behaviour The accessory extends the effective measuring range by 25 mm, allowing inspections of deeper bores or recessed features without altering the base measuring principle. By maintaining the original contact geometry and a Ø 15.5 mm shank dimension, the extension is engineered to preserve alignment and repeatability when combined with the matching rod measuring set. This approach reduces the need for makeshift adaptions and shortens set‑up time, delivering a measurable improvement in process efficiency during routine quality checks. Seamless compatibility for reliable workflows Designed specifically for the series referenced in the item description, the extension ensures straightforward mechanical compatibility with models 310.059/60/61/64, avoiding additional calibration steps in most workshop environments. The compact form and low mass—approximately 0.1 kg—minimise handling fatigue during repeated use and help maintain the original instrument’s centre of gravity. As a result, inspection cycles remain fast and reproducible, supporting higher throughput in production or maintenance routines. Practical handling and storage benefits The simple cylindrical design and industry-standard dimensions make the accessory easy to mount, remove and store alongside other measuring rods. Its modest weight and compact footprint lend themselves to organised tool trays or measurement kits, reducing the space required in a busy inspection bench. Where traceability matters, the clear article reference and GTIN simplify inventory management and ensure the correct accessory is selected for each measuring task. Contact Metav Werkzeuge for precise compatibility checks and to secure fast supply of the Metav IndustryLine extension for improved measuring reach. Technical data Article number: M310.061.2 GTIN: 4054469118871 Weight: 0.1 kg Tariff number: 90173000 Facts Extension length: 25 mm Shank diameter: 15.5 mm ECLASS: 21019104 ETIM: EC002219 Special features Compatible with models 310.059/60/61/64 Accessory for rod-style internal measuring sets Category: Accessories (measuring instruments) Brand: Metav IndustryLine FAQ Is this extension compatible with my existing rod internal measuring set? Compatibility is specified for the models 310.059/60/61/64; the Extension 25 mm Ø 15.5 mm (M310.061.2) is engineered to fit those sets without modification. Will using the extension require recalibration of the measuring set? In most standard workshop applications no full recalibration is needed; however, final inspection procedures should confirm repeatability when the Extension 25 mm Ø 15.5 mm (M310.061.2) is fitted. What is the weight and how does it affect handling? The accessory weighs approximately 0.1 kg, a low mass that keeps handling comfortable and helps maintain the original instrument balance during repeated measurements. Can the extension reach deep bores that the base rod cannot? Yes — the purpose of this extension is to increase effective measuring reach by 25 mm so that recessed or deeper features can be accessed with the existing rod measuring set. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Extension Ø22 For Rod Internal Micrometer Sets - Metav IndustryLine
Compact 25 mm extension with a Ø22 mm interface ensures secure compatibility with rod internal micrometer screw sets 310.062/310.063 and adds only 0.1 kg to the measuring chain; Order the extension directly via Metav Werkzeuge or ask our consultants if needed Extension 25 mm, Ø22 mm — accessory for rod internal micrometer sets (Metav IndustryLine) The Extension 25 mm, Ø22 mm is an accessory designed to extend the measuring reach of rod internal micrometer screw sets while preserving fit and measurement stability Compatible with models 310.062 and 310.063 25 mm extension length for extended reach Ø22 mm secure interface for stable seating Lightweight 0.1 kg for minimal added mass Increase reach without compromising measurement integrity The 25 mm add-on provides a straightforward method to extend internal measurement capacity where an incremental length is needed. By adding a defined length rather than replacing the instrument, workshop processes remain efficient and repeatable. The Ø22 mm interface is designed for a stable mechanical connection to the corresponding rod internal micrometer screw sets, ensuring that axial alignment and clamping accuracy are preserved. This approach reduces downtime for tool changes and helps maintain consistent precision across serial checks. Stable connection for repeatable results A compact and lightweight construction keeps added mass to 0.1 kg, which minimises influence on instrument dynamics and handling. The extension's geometry supports a secure seating that reduces lateral play and the risk of measurement deviation during insertion or retraction operations. For production and inspection environments where repeatability matters, this accessory supports efficient workflow integration and reduces the need for additional specialised instruments, translating into lower handling complexity and fewer sources of error. Practical integration in inspection routines Compatibility with the 310.062 and 310.063 sets simplifies stock management and tool logistics: the extension fits directly to the intended systems and is identifiable by SKU M310.063.1 for order and inventory control. The compact format makes storage and retrieval straightforward on the shop floor, and the accessory is suited to applications where a small, reliable increase in measuring range is preferable to a full instrument swap. For traceability and procurement, reference GTIN 4054469118956 and tariff number 90173000 when ordering. Contact Metav Werkzeuge for product availability, compatibility checks and ordering of the M310.063.1 extension — delivery and expert advice are available from our Emmerich location Technical data Article number: M310.063.1 GTIN: 4054469118956 Tariff number: 90173000 Category: Accessory (Zubehör) Measurements & core data Extension length: 25 mm Interface diameter: Ø22 mm Weight: 0.1 kg Features & compatibility Compatible with 310.062 and 310.063 rod internal micrometer screw sets Accessory for internal measuring extensions Story trigger: Zubehör FAQ How does the extension attach to existing rod internal micrometer sets? The extension connects via the Ø22 mm interface designed for the 310.062/310.063 sets, providing a secure mechanical fit for stable internal measurements. Will the extension affect measurement accuracy? When mounted correctly, the extension maintains the measurement stability of the parent set; the low added mass supports repeatable results in standard inspection tasks. What identifiers help when ordering spare parts or accessories? Order by SKU M310.063.1 or GTIN 4054469118956 to ensure the correct 25 mm, Ø22 mm extension is supplied for the designated rod internal micrometer screw sets. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Five-Point External Micrometer 0.01mm Graduation Carbide Measuring Faces, Ratchet, Supplied in Case - Metav IndustryLine
Take advantage of a compact, workshop-ready micrometer that combines five‑point measurement, a fine 0.01 mm graduation and a high repeatability of ±0.005 mm for reliable results on five‑sided components; order the instrument directly via Metav Werkzeuge or ask our consultants for application advice. M309.031 5‑point external micrometer — 5–25 mm, 0.01 mm graduation (Metav IndustryLine) The M309.031 5‑point external micrometer is a robust analogue measuring instrument optimised for precise gauging of five‑sided and polygonal workpieces in workshop and quality‑control environments. Five‑point external measuring head Measuring range 5–25 mm Graduation 0.01 mm Carbide measuring faces Accurate results for small, critical profiles This analogue micrometer delivers a graduation of 0.01 mm together with a verified accuracy of ±0.005 mm, making it suitable for demanding shop‑floor checks and final inspection tasks. The five‑point measuring head stabilises contact on polygonal faces and reduces alignment errors compared with single‑anvil checks. With its mechanical scale and robust spindle, the instrument provides a direct, no‑battery reading method that is straightforward to interpret and quick to integrate into existing inspection routines. Consistent contact pressure and wear resistance Built with a ratchet stop to ensure reproducible measuring force and carbide measuring faces to resist wear, the tool sustains measurement stability over prolonged use. The frame is finished with a painted coating and the measuring drum is matt‑chrome plated, which reduces glare and aids reading under workshop lighting. A factory set setting standard 5 mm facilitates initial calibration and alignment during first use, while the ratchet mechanism helps eliminate variability introduced by hand pressure. Tailored for polygonal and five‑sided components Designed specifically for five‑sided and similar polygonal workpieces, the micrometer performs well in toolrooms, production control and specialised mechanical workshops where such shapes are common. The compact envelope and analogue operation support rapid spot checks and batch monitoring without the need for power or digital interfaces, making it a practical choice for throughput‑oriented quality checks and routine machine setup verification. Procurement confidence and workshop integration Supplied under the Metav IndustryLine, the instrument benefits from Metav’s established supply chain and product filtration in Emmerich, which supports reliable availability and consistent quality for industrial buyers. Technical identifiers such as GTIN and ETIM classification simplify catalogue management and procurement processes. For customers seeking straightforward, durable measuring technology that integrates with standard inspection workflows, this micrometer combines robustness with the precision required for repeatable results. For application matching or to secure the M309.031 from Metav IndustryLine, contact Metav Werkzeuge GmbH for tailored advice and ordering assistance. Technical data Article number: M309.031 GTIN: 4054469117621 eClass: 21170328 ETIM: EC003590 HS tariff: 90173000 Facts Measuring range: 5–25 mm Graduation: 0.01 mm Accuracy: ±0.005 mm Setting standard: 5 mm Reading: analogue Special features Carbide measuring faces Painted frame Matt‑chrome measuring drum Ratchet stop for constant measuring force Suitable for five‑sided (pentagonal) workpieces FAQ What measuring range does this micrometer cover? The micrometer covers a measuring range of 5–25 mm, ideal for small to medium polygonal components. How precise is the instrument in everyday use? The device offers a graduation of 0.01 mm with a stated accuracy of ±0.005 mm, providing high repeatability for shop‑floor and inspection tasks. Are the measuring faces durable for frequent use? Yes, the micrometer is fitted with carbide measuring faces, which greatly improve wear resistance and sustain measurement accuracy over time. Does the product include a force‑control feature? The instrument uses a mechanical ratchet stop to ensure consistent contact pressure; no electronic force‑control is fitted. Is the tool suited for polygonal or five‑sided parts specifically? Yes, the geometry of the measuring head is intended for reliable contact on five‑sided and other polygonal workpieces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Gear Thread Micrometer Digital Color 2.4" Touchscreen Wireless/USB ISO 17025 Calibration - Microtech Metrology
Take advantage of factory ISO 17025 calibration, wireless data transfer and a 0–25 mm measuring range with 0.003 mm accuracy for reliable gear inspections; order the micrometer directly via Metav Werkzeuge or consult our experts if further advice is required. Micrometer for Gear Measurement — digital micrometer with 2.4" colour touchscreen and wireless data output, Microtech Metrology Micrometer for gear measurement designed for precision checks on teeth and profiles in workshop and laboratory settings Digital micrometer with colour touchscreen ISO 17025 factory calibration included Wireless and USB data output Measuring range 0–25 mm with 0.003 mm accuracy Precision where it changes production outcomes This instrument delivers high-resolution inspection tailored to small-format parts: with a 0–25 mm measuring range it falls into the Micro class, offering a compact solution for gear teeth and fine components where stiffness and repeatability matter. The device features a reading resolution of 0.0001 mm and a stated accuracy of 0.003 mm, which supports traceable quality control in serial production. Supplied with an ISO 17025 calibration certificate, the unit arrives ready for quality documentation and audit trails, reducing setup time for laboratory routines and incoming inspection. Seamless data flow to modern quality systems Equipped with both Wireless and USB data output and a 2.4" touchscreen, the micrometer integrates into statistical process control and digital record-keeping without additional adapters. The non-rotating spindle minimises frictional errors and surface wear during repeated measurements, improving long-term reproducibility. These technical choices reduce manual transcription errors and speed up data collection, supporting faster decision-making on the shop floor and smoother handover to measurement software. Practical design for gear inspection and workshop use The compact frame and dedicated contact geometry are optimised for measuring gear flanks and small profiles; the instrument is intended for routine quality checks as well as laboratory verification. Note that the anvil with ball is not included and must be sourced separately if spherical contact is required. Finished in robust materials and with a touch-operated display, the device balances precision with ease of operation, making it suitable for both specialised metrology departments and precision-focused workshops. Discuss measurement requirements with Metav Werkzeuge or request the ISO 17025 documentation from our advisors at Metav Werkzeuge to ensure the unit matches the intended gear inspection task Technical data Article number: 110740258 GTIN: 4061905456688 Manufacturer: Microtech Metrology Facts Measuring range: 0–25 mm Accuracy: 0.003 mm Reading resolution: 0.0001 mm Display: Colour 2.4" touchscreen Special features Data output: Wireless and USB Non-rotating spindle Digital operation ISO 17025 calibrated with certificate Anvil with ball not included FAQ How precise is this micrometer for gear tooth inspection? The micrometer for gear measurement from Microtech Metrology offers an accuracy of 0.003 mm and a resolution of 0.0001 mm, making it suitable for demanding gear checks; refer to SKU 110740258 for the exact specification. Is the instrument supplied calibrated and traceable? Yes, the micrometer is delivered fully calibrated to ISO 17025 and includes a calibration certificate issued by Microtech Metrology for traceability and documentation. Can measurement data be exported directly to a PC or SPC system? Measurement data can be transferred wirelessly or via USB from the micrometer, enabling direct capture into inspection software or SPC systems for efficient data handling. Does the micrometer include a spherical anvil for tooth-tip measurement? The anvil with ball is not included with this micrometer; the device is compatible with dedicated contact accessories and the anvil must be obtained separately if required. What makes this device suitable for workshop use rather than only laboratory use? Compact dimensions, a robust digital touchscreen, wireless data output and factory ISO 17025 calibration make the instrument versatile for both workshop inspections and laboratory-grade verification. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Groove Internal Caliper With Dual Scale For Internal Slot Measurement In Plastic Case - Metav IndustryLine
Benefit from the combination of 0.01 mm readability, a compact 0–25 mm measuring range and a robust transport case for repeatable internal T‑slot measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. T‑slot internal micrometer M311.011 — 0–25 mm range, 0.01 mm reading (Metav IndustryLine) The T‑slot internal micrometer M311.011 is a compact analogue micrometer designed for precise measurement of internal cross‑slots and grooves in fine mechanical parts and fixtures Double scale for internal and external measurement Measuring range 0–25 mm for fine tasks Readability 0.01 mm for precise reading Supplied in protective transport case Precision that serves fine mechanical requirements The instrument delivers a 0.01 mm reading and a stated accuracy of 0.01 mm, making it suitable where small tolerances matter. The analogue vernier mechanism combined with a 0.5 mm spindle pitch provides a tactile, backlash‑resistant feel while turning, which benefits inspection tasks that rely on repeatable hand‑held measurement. The measuring mandrel of Ø 6.5 mm and the compact design reduce probing interference in narrow grooves, so set‑ups remain efficient without sacrificing clarity. This level of specification supports quality assurance steps in small‑batch production and toolroom inspection. Compact build for workshop convenience and repeatability At 178 mm overall length and weighing 0.2 kg, the gauge is easy to manoeuvre and store, yet sufficiently rigid for consistent readings in confined assemblies. The instrument covers external and internal measurement across 0–25 mm and 1.6–26.5 mm respectively, which places it in the micro range for precision metrology—ideal for watchmaking, small fixtures and precision mechanical components. The integrated double scale allows fast cross‑checking of inside and outside dimensions without swapping tools, reducing handling time and measurement uncertainty. The device is supplied in a protective transport case to safeguard the micrometer during storage and transport. Practical use, maintenance and application scenarios Intended for measuring internal T‑slots and cross‑grooves, the instrument suits inspection benches, jig and fixture checks, and sample testing in component assembly. The analogue reading is intuitive for experienced users and retains reliability where simple, robust measurement is preferred over networked data output. Routine maintenance is limited to keeping the spindle and anvils clean and lightly oiled; periodic professional calibration is recommended to maintain traceability. If a calibration certificate with a specific standard is required, Metav Werkzeuge can advise on available options and test house procedures. For workshop‑ready precision, request the Metav IndustryLine T‑slot internal micrometer M311.011 from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and ordering support Technical Data Article number: M311.011 GTIN: 4054469119052 Category: Micrometers Manufacturer: Metav IndustryLine Facts Measuring range external: 0–25 mm Measuring range internal: 1.6–26.5 mm Resolution/readability: 0.01 mm Accuracy: 0.01 mm Spindle pitch: 0.5 mm Length: 178 mm Weight: 0.2 kg Tariff number: 90173000 Special features Double scale for inside and outside measurement Analogue vernier reading Measuring mandrel Ø 6.5 mm for T‑slots Supplied in protective transport case FAQ How fine is the reading on this gauge? The T‑slot internal micrometer M311.011 provides a readability of 0.01 mm, enabling precise inspection of small grooves and slots. What measuring ranges does the instrument cover? The device covers external measurements from 0–25 mm and internal measurement capability from 1.6–26.5 mm, suited to micro‑range tasks. Is the micrometer suitable for workshop use on fixtures and small parts? Yes, the compact size, low weight and double scale design make the instrument appropriate for jig, fixture and small component inspection in the workshop. Does the product include protective packaging for transport? The micrometer is supplied in a protective transport case to reduce the risk of damage during handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Height Gauge With Interchangeable Tips, Colour Display, ISO 17025 Calibrated - Microtech Metrology
Take advantage of lab-grade accuracy (±0.002 mm) together with ISO 17025 calibration and a colour display for dependable, traceable measurements; the unit also supports Wireless + USB data transfer for fast integration. Order the device directly via Metav Werkzeuge or ask our consultants if needed. Micrometer 0–25 mm — Digital micrometer with colour display and Wireless + USB (Microtech Metrology) A micrometer engineered for precise external measurements in workshop and laboratory environments, combining sub-micron repeatability with digital data output for streamlined quality control. Lab-grade accuracy ±0.002 mm ISO 17025 calibrated with certificate Colour display for clear readout Wireless and USB data output Reliable accuracy that reduces rework High-precision measurements are the foundation of consistent production quality. With a stated accuracy of ±0.002 mm and delivery including an ISO 17025 calibration certificate, this instrument supplies verifiable measurement results that reduce scrap and rework. The calibration certificate documents traceability, making the micrometer suitable for incoming inspection and laboratory routines where documented proof of accuracy is required. The construction features a non-rotating spindle to improve repeatability during clamping and contact, which supports reproducible measurements across multiple operators and shifts. Fast data capture for modern quality processes Manual transcription is a frequent source of error in quality workflows. The instrument’s Wireless + USB data output removes that step by enabling direct transfer of readings into SPC or measurement software, speeding up batch inspection and logging. The colour display provides an immediate, unambiguous readout and the fine display step of 0.0001 mm enhances visual assessment for borderline tolerances. Integrated digital output and robust readout reduce processing time per part and help maintain production throughput without compromising on measurement integrity. Built for repeatability and workshop routines Designed for frequent use in industrial environments, this digital micrometer balances sensitivity and durability. The non-rotating spindle reduces wear on the workpiece and the measuring faces, while the compact 0–25 mm measuring range concentrates stiffness where it matters most, improving one-handed operation and handling in tight spaces. The digital electronics and wired/wireless data paths support traceable workflows and shorten documentation loops; combined with the ISO 17025 calibration, the instrument is ready for integration into formal QA processes. For mixed lab–shop use, this unit offers a dependable mix of precision, usability and data connectivity. Contact Metav Werkzeuge to request this Microtech Metrology micrometer with ISO 17025 certificate and Wireless + USB output — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 110750298 GTIN: 4061905451829 Manufacturer: Microtech Metrology eClass: 21170328 ETIM: EC003590 Facts Measurement range: 0–25 mm Display resolution: 0.0001 mm Accuracy: ±0.002 mm Digital: yes Special features Colour display Data output: Wireless + USB ISO 17025 calibration with certificate Non-rotating spindle Digital instrument FAQ Is the instrument supplied with a calibration certificate? Yes. The micrometer (Microtech Metrology, SKU 110750298) is delivered with an ISO 17025 calibration certificate, ensuring traceability for laboratory and inspection use. Can readings be transferred directly into measurement software? Yes. This device provides Wireless + USB data output for direct transfer into SPC or inspection systems, facilitating automated data capture and reducing transcription errors. What measurement range and resolution does the instrument offer? The micrometer covers 0–25 mm with a display resolution of 0.0001 mm and an accuracy of ±0.002 mm, making it suitable for fine external measurements and routine quality checks. Is the spindle design optimised for repeatability? The instrument features a non-rotating spindle, which supports consistent contact and improves repeatability during repeated measurements. Is the display suitable for quick visual inspections? Yes. A colour display delivers clear, immediate readings that help speed up decisions on the shop floor while preserving precision. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Inset Micrometer, Parallel Measuring Faces, 0.5mm Spindle Pitch, DIN 863 - Metav IndustryLine
Take advantage of a compact 0–25 mm measuring range, plan‑parallel measuring faces and a fine 0.5 mm spindle pitch for reliable inset measurements in tight assemblies; order the M303.131 directly via Metav Werkzeuge or ask our consultants if needed. M303.131 inset micrometer — 0–25 mm range, plan‑parallel faces The M303.131 is an inset micrometer designed for precise small‑range measurements in assembly and inspection tasks, suitable where space is limited and repeatable readings are required Compact 0–25 mm measuring range Plan‑parallel measuring faces for stability 0.01 mm analogue graduation for fine reads Conforms to DIN 863 for traceable practice Precision tailored for miniature workpieces The micrometer is part of the micro measurement class, covering a 0–25 mm range that is ideal for fine mechanical and watchmaking tasks where short, rigid jaws reduce twist and increase repeatability. The combination of plan‑parallel measuring faces and an analogue readout with 0.01 mm divisions provides a straightforward, reliable basis for quality checks. Compliance with DIN 863 ensures that the instrument meets established workshop standards, delivering measurable conformity for routine inspection tasks while keeping the measuring chain simple and verifiable. Stable mechanics for consistent repeatability A matt‑chrome‑plated drum and a substantial spindle diameter contribute to stable handling and reduced operator‑induced error. The matt chrome drum resists glare while offering a tactile surface for controlled adjustments; the spindle dimension and build quality support reproducible contact pressure and consistent readings. At roughly 0.1 kg, the device is light enough for handheld use yet rigid enough to preserve alignment during short measurement cycles, helping to reduce rework and accelerate throughput in small‑part production. Clear integration and how the spindle specification helps The spindle pitch of 0.5 mm means each full revolution advances the spindle by half a millimetre; combined with the 0.01 mm graduation this yields fifty readable increments per turn, enabling fine positioning without the need for electronic aids. As an inset instrument, the micrometer is designed for flush mounting into fixtures or test rigs, simplifying installation into comparative gauges or automated probes. The plain mechanical principle avoids dependence on batteries or interfaces, making the tool low‑maintenance and predictable in long‑term shop use. Practical benefits for the workshop environment Designed for demanding everyday use, the instrument balances compactness and metrological integrity. The short measuring range and robust faces suit repetitive checks on small features, calibration artefacts and precision fittings. For teams seeking an entry to high‑quality hand metrology, this micrometer delivers reproducible results with minimal training required. The analogue format also makes immediate assessment simple during setup or first‑article inspection, speeding decision‑making on the shop floor while maintaining technical rigour. Choose Metav IndustryLine’s M303.131 for dependable inset measurement and contact Metav Werkzeuge in Emmerich for a tailored supply or technical clarification: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M303.131 GTIN: 4054469115719 Weight: 0.1 kg Facts Measuring range: 0–25 mm Reading: 0.01 mm Spindle pitch: 0.5 mm Standard: DIN 863 Special features Mounting type: inset micrometer Measuring faces: plan‑parallel Drum finish: matt chrome plated Analogue (mechanical) readout FAQ What measuring range does this inset micrometer cover? The M303.131 inset micrometer covers a 0–25 mm range, making it suitable for micro‑class measurement tasks and compact assembly checks. Is the M303.131 compliant with recognised standards? Yes, the instrument is manufactured to DIN 863, which governs micrometer design and measurement practice for workshop use. How fine is the resolution and what does it mean in practice? The micrometer has a 0.01 mm analogue graduation; combined with the 0.5 mm spindle pitch, this provides fifty readable increments per spindle revolution for accurate manual setting and inspection. Can the micrometer be mounted into fixtures or gauges? The M303.131 is an inset design intended for flush mounting into fixtures or test rigs, enabling integration into comparative gauges and production test assemblies. What materials and finishes are used on the measuring surfaces and drum? The drum is matt chrome plated and the measuring faces are plan‑parallel, giving a stable contact geometry and a glare‑reducing, durable finish. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Installation Micrometer Planar Measuring Faces Locking Spindle 6.5mm M9 Thread, DIN 863 - Metav IndustryLine
Take advantage of a compact, built‑in design with a 0–25 mm measuring range and 0.01 mm resolution for reproducible results; the matt chrome‑plated drum and DIN 863 conformity support robust workshop use. Order or obtain application advice directly via Metav Werkzeuge for seamless integration. M303.131.S built‑in micrometer — 0–25 mm, 0.01 mm resolution (Metav IndustryLine) The M303.131.S is a compact built‑in micrometer designed for machine and panel integration, offering planparallel measuring faces and a reliable locking function for repeatable small‑range measurements. Built‑in design for machine mounting 0–25 mm measuring range 0.01 mm analogue readout DIN 863 compliance Consistent precision for repeatable measurements Precision is the primary advantage of this compact micrometer. With a 0–25 mm measuring range and a fine 0.01 mm indication, the instrument supports precise sizing and quality checks where small tolerances matter. The spindle advances with a spindle pitch 0.5 mm, which—combined with the vernier‑style analogue scale—ensures predictable linear motion and traceable increments. Compliance with DIN 863 documents the mechanical accuracy and makes the device suitable for standard workshop inspection routines, ensuring that measurements are both reliable and comparable across shifts and machines. Integration and robustness that reduce setup time Engineered for in‑line installation, the built‑in form factor simplifies mounting into fixtures and control panels. The metric M9 thread and compact spindle Ø 6.5 mm make mechanical connection straightforward, while the low mass (approx. 0.1 kg) minimises dynamic load on moving parts. The matt chrome‑plated drum resists glare and surface wear, improving legibility and longevity in production environments. This combination of mechanical detail reduces setup iterations and shortens machine‑integration time, delivering a measurable improvement in process efficiency. Secure handling and straightforward maintenance Planparallel measuring faces provide stable contact geometry for external and step measurements, reducing orientation error during short‑range checks. A dedicated locking device holds the spindle position for transfer measurements or when replicating a setting across multiple parts. The analogue readout avoids electronics in harsh environments and facilitates quick visual checks on the shop floor. Routine care is limited to light cleaning and occasional lubrication of the spindle; the simple construction keeps downtime low and service straightforward, supporting continuous operation in demanding production contexts. For specific mounting instructions, batch requirements or to discuss suitable quantities for production, contact Metav Werkzeuge — consultants at Metav Werkzeuge can advise on integration, delivery and calibration options. Technical Data Article number: M303.131.S GTIN: 4054469115726 Category: Messschrauben (micrometer) Manufacturer: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution/reading: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Thread for mounting: M9 Weight: 0.1 kg Standard: DIN 863 Special features Built‑in micrometer design for panel or fixture integration Planparallel measuring faces Analogue mechanical readout (vernier style) Matt chrome‑plated drum Locking device for stable measurements FAQ Is the M303.131.S suitable for installation in a machine housing? Yes. The M303.131.S is designed as a built‑in micrometer with an M9 mounting thread and compact spindle diameter for straightforward integration into housings and fixtures. What measurement accuracy can be expected from this micrometer? The instrument provides a 0.01 mm reading increment and is manufactured to DIN 863, offering reliable small‑range accuracy for standard workshop control. Can the micrometer be used for repeated stop‑and‑go measurements? The integrated locking device secures the spindle position, enabling stable repeat measurements and easy transfer of settings between parts. What maintenance does the M303.131.S require? Routine maintenance is minimal: keep the measuring faces clean, apply light lubrication to the spindle as needed and protect the device from heavy contamination to maintain measurement quality. Is the finish on the drum purely cosmetic or functional? The matt chrome‑plated drum improves legibility and resists wear, thus contributing to both handling comfort and long‑term durability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm In‑Line Digital Micrometer Head Touchscreen, Non‑Rotating Spindle, IP65, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of the combination of high repeatability, Industry 4.0 connectivity and a robust IP65 enclosure for reliable in-line measurement. Order the DataMet micrometer head directly via Metav Werkzeuge or ask our consultants if needed. DataMet micrometer head – In-line micrometer head with 2.4″ touchscreen (0–25 mm) — Microtech Metrology The DataMet micrometer head is a compact in-line measuring instrument for precision length control and automated data capture in production and laboratory environments. 0–25 mm measurement range 0.0015 mm high accuracy Non-rotating spindle design 2.4″ touchscreen with Wireless + USB Precision that reduces rework and secures tolerances The instrument delivers 0.0015 mm accuracy with a readability of 0.0001 mm, providing a measurable reduction in process variation for inspection and set‑up tasks. The non-rotating spindle eliminates torsional errors typical of rotating spindles, so repeated contact measurements remain consistent and less sensitive to operator technique. This level of control is particularly valuable where tight tolerances dictate fewer rejects and faster machine set‑ups, for example during tool offsets, fixture checks or dimensional spot checks on assemblies. Fast integration and real-time data for Industry 4.0 workflows Equipped with a 2.4″ touchscreen and multiple transfer modes, the device supports Wireless, USB HID, Wireless HID+MAC and direct link to the MDS app on Windows, Android, iOS and macOS. The built-in memory manager stores 2000 values in a folder structure with statistics, enabling local batch logging and later transfer. For factory automation, optional MODBUS RTU (RS‑485) is available for PLC integration. The result is a seamless data path from measurement to SPC, reducing manual entry and ensuring traceable digital records for production control. Robust construction for shop-floor reliability The sensing head is housed in CNC‑machined aluminium, providing a resilient frame that withstands handling and mounting stresses. With an IP65 rating the unit tolerates coolant splash and dust on the shop floor, making it suitable for machine‑tool integration or test stands. Built‑in functions such as online graphs, Go/NoGo, Max/Min, linear and temperature correction support reliable decision‑making at the point of measurement and help compensate for common environmental effects that otherwise compromise precision. Functions and modes that simplify measurement tasks The instrument supports on‑line graphic display, analog scale, formula evaluation and timer functions for process checks. A dedicated measuring hub enables wireless instrument synchronisation, 2D graphing and probe mode for complex set‑ups. These capabilities turn a single transducer into a multifunction measurement node that can perform comparative checks, record trends and flag out‑of‑tolerance conditions without additional hardware. An ISO 17025 calibration certificate is supplied for immediate traceability and audit readiness. For tailored integration advice or to secure a calibrated DataMet micrometer head from Microtech Metrology, contact Metav Werkzeuge in Emmerich for specification support and reliable European delivery. Technical data Article number: 110181029 GTIN: 4061905456596 Manufacturer: Microtech Metrology Measurement range: 0–25 mm Readability: 0.0001 mm Accuracy: 0.0015 mm Display: Touchscreen 2.4″ Data output: Wireless + USB Protection class: IP 65 Calibration: ISO 17025 certificate included Facts Resolution: 0.0001 mm Accuracy (specified): 0.0015 mm Memory capacity: 2000 values Display size: 2.4″ Protection rating: IP65 Special features Non-rotating spindle for repeatable contact Wireless MDS app compatibility (Windows, Android, iOS, macOS) Wireless HID and USB HID modes Optional MODBUS RTU (RS‑485) for PLCs On-line graphic, Go/NoGo, Max/Min, formula and timer functions Linear and temperature compensation modes CNC‑machined aluminium housing Measuring hub with 2D graph and probe mode ILAC MRA recognised ISO 17025 calibration certificate FAQ Is the instrument delivered calibrated? Yes. The DataMet micrometer head is supplied with an ISO 17025 calibration certificate for immediate traceability. What accuracy and resolution can be expected? The device specifies an accuracy of 0.0015 mm with a readability of 0.0001 mm, suitable for fine inspection and set‑up tasks. Which data interfaces are available for integration? Data transfer is possible via Wireless, USB HID, Wireless HID+MAC and the MDS app; an optional MODBUS RTU output supports industrial PLC connections. Can the device be used on the shop floor? Yes. The IP65 rating and CNC‑machined aluminium housing ensure resistance to dust and splash, making it appropriate for machine‑tool and workshop environments. How much data can be stored locally? The built‑in memory manager holds up to 2000 values, organised in folders with basic statistics for batch checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Micrometer Caliper Flat Anvil, 0.01mm Graduation, Ratchet, Chrome-Plated Measuring Drum, Delivered in Case - Metav IndustryLine
The combination of a compact 0–25 mm measuring range, a clear 0.01 mm graduation and a built‑in ratchet stop ensures fast, repeatable measurements of hub shoulders and bores. Order the instrument directly via Metav Werkzeuge or consult the Metav team for specification support. Micrometer for wheel hubs M307.043 – 0–25 mm, 0.01 mm graduation (flat anvil) by Metav IndustryLine Micrometer for wheel hubs M307.043 designed for precise external measurements on hub shoulders and bores in workshop and quality‑control environments 0–25 mm measuring range, micro class 0.01 mm graduation for clear reading Ratchet stop for consistent measuring force Supplied in protective case for safe transport Accurate measurements that reduce rework and save time A compact measuring instrument from the micro class, the micrometer delivers a 0–25 mm range that is ideal where short, stiff jaws and high repeatability matter. With a graduation of 0.01 mm and an indicated accuracy of ±0.004 mm, the device offers measurability suited to fine mechanical work and workshop inspection. The ratchet stop and the spindle pitch of 0.5 mm create a reproducible contact pressure, which reduces operator‑induced scatter and lowers the risk of rejects during serial checks. Robust, workshop‑ready construction for daily use The frame is painted for corrosion resistance while the measuring drum is matt‑chrome plated to resist wear and to keep scale legibility. A flat anvil adapts the instrument for measuring wheel hub shoulders and bore steps, permitting stable seating on curved or stepped surfaces. At approximately 0.3 kg, the tool balances solidity with manoeuvrability, making it simple to handle on the bench without sacrificing stiffness. Clear analog reading and controlled measuring force As an analog micrometer with a fine 0.01 mm graduation, the instrument gives an immediate visual result without electronics, useful in environments where rapid checks must be performed. The ratchet mechanism ensures that the same tactile end‑point is reached every time, so measurements are reproducible even in high‑throughput inspection. The 6.5 mm measuring faces provide a defined contact area that helps stabilise readings on small shoulders and bores. Integration into quality routines and handling benefits Delivered in a protective case for safe transport and storage, the micrometer is straightforward to include in calibration cycles or inspection kits. The short measuring length and compact head geometry make it suitable for confined workspaces and for measuring features on assemblies where access is limited. Clear physical construction and durable surface finishes cut maintenance needs and support continuous operation in production or maintenance departments. Contact Metav Werkzeuge to discuss suitability for hub inspection or to order the Micrometer M307.043 directly — expert advice and local delivery options are available from Metav Werkzeuge. Technical data SKU: M307.043 GTIN: 4054469117362 eClass: 21170328 ETIM: EC003590 TARIC: 90173000 Facts Measuring range: 0–25 mm Graduation / reading: 0.01 mm Indicated accuracy: ±0.004 mm Measuring face diameter: 6.5 mm Spindle pitch: 0.5 mm Weight: 0.3 kg Special features Analog micrometer screw gauge Ratchet stop for consistent measuring force Flat anvil for hub shoulders and bore steps Frame painted, measuring drum matt‑chrome plated Supplied in protective case Suitable for measurements of wheel hubs or bore shoulders FAQ What is the measuring range and resolution of this micrometer? The micrometer M307.043 covers a 0–25 mm range with a 0.01 mm graduation, making it suitable for micro‑class external measurements. How repeatable are measurements with the M307.043? Repeatability is supported by the ratchet stop and a spindle pitch of 0.5 mm, with an indicated accuracy of ±0.004 mm that keeps sample‑to‑sample variation low. Can this tool measure hub shoulders and bores reliably? Yes; the flat anvil geometry and 6.5 mm measuring faces are designed specifically for stable contact on wheel hub shoulders and similar stepped features. Is the instrument suitable for workshop use and transport? The tool is built for workshop environments: the frame is painted, the drum is matt‑chrome plated, and the instrument is supplied in a protective case for safe transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Micrometer Caliper With Ratchet, 0.01mm Graduation, Blue Powder Coating, DIN 863 - Metav IndustryLine
Combining workshop-grade durability with a 0.01 mm reading and a ratchet stop, this outside micrometer delivers repeatable measurements for routine quality checks. Order the M304.408 directly via Metav Werkzeuge or consult our technical team if additional information is required. M304.408 outside micrometer (0–25 mm) — 0.01 mm resolution, ratchet stop (Metav IndustryLine) The M304.408 is a compact 0–25 mm outside micrometer engineered for reliable workshop and quality‑control measurement of small components. 0.01 mm resolution reading Ratchet stop for consistent measuring force Hardened measuring faces for long life Precision that guarantees reproducible results The mechanical micrometer is built around a fine 0.5 mm spindle pitch, which in combination with the 0.01 mm graduation provides the tactile and visual feedback needed for repeatable readings. The integrated ratchet stop limits applied force, reducing operator‑induced variation and improving measurement consistency across runs — an essential advantage for routine inspection and machining set‑ups. Compliance with DIN 863 underlines the instrument’s suitability for standard workshop quality procedures. Robust construction for everyday workshop use A blue powder‑coated frame protects the body from workshop wear while the matt chrome‑plated measuring drum resists corrosion and glare for easier reading. The measuring faces are hardened, which reduces wear and maintains accuracy over prolonged use; this promotes lower life‑cycle cost through fewer regrinds and replacements. The combination of protective finishes and hardened contact surfaces ensures dependable performance in a practical industrial environment. Compact range and straightforward handling for fine work With a measuring range optimised for small components, the compact format suits fine mechanical tasks, jigs and fixtures, and general workshop quality control where reach and stiffness are balanced. The analogue design gives direct, immediate readings without power dependency, making the tool convenient for shopfloor use. Clear mechanical operation and a compact frame make this micrometer well matched to precision tasks in toolrooms and maintenance workshops. For consistent 0.01 mm measurements choose the Metav IndustryLine M304.408 — contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M304.408 GTIN: 4054469116877 Category: Messschrauben Norm: DIN 863 Facts Measuring range: 0–25 mm Reading / resolution: 0.01 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Analog / mechanical Special features Ratchet stop for reproducible measuring force Hardened measuring faces Frame powder‑coated (blue) Measuring drum matt chrome‑plated Designed for workshop and quality‑control use FAQ What accuracy can be expected from this micrometer? The micrometer provides a reading resolution of 0.01 mm; combined construction and hardened faces deliver consistent accuracy suitable for routine workshop inspections. How does the ratchet stop improve measurements? The ratchet stop on the M304.408 limits the applied measuring force, preventing over‑tightening and reducing variability between operators for more reproducible results. Is the micrometer suitable for shopfloor use? Yes. The powder‑coated frame and matt chrome drum protect the instrument against everyday workshop conditions, while the analogue design requires no power source. Does the instrument comply with recognised standards? The device is designed in accordance with DIN 863, making it appropriate for standard measurement tasks within many industrial contexts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Micrometer Screw With 20mm Anvil Faces, Colour 1.5" Touchscreen, IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of ISO 17025 traceable calibration, high 0.003 mm accuracy and robust IP65 protection for dependable workshop and laboratory measurements; order the micrometer directly via Metav Werkzeuge or consult the Metav team for specific integration needs. Micrometer 0–25 mm – Digital micrometer with colour touchscreen and Wireless+USB (Microtech Metrology) A Micrometer designed for precise small-part measurement in inspection labs and fine mechanical workshops, offering a colour touchscreen and wireless plus USB data transfer for streamlined documentation ISO 17025 calibration included 0–25 mm measuring range, 0.003 mm accuracy Colour 1.5" touchscreen display Wireless and USB data output IP65 dust and splash protection High-precision measurements with traceable calibration The device delivers a measuring range of 0–25 mm with a stated accuracy of ±0.003 mm, backed by a reading resolution of 0.0001 mm. This level of precision makes it suitable for stringent quality control tasks where repeatable results are required. Because the instrument is supplied with an ISO 17025 calibration certificate, measurement results are traceable and auditable — a practical advantage for laboratories and suppliers that must demonstrate compliance during audits or supplier evaluations. The combination of fine resolution and documented calibration reduces rework and supports reliable process decisions. Seamless data capture for efficient workflows Equipped with Wireless and USB data outputs plus a 1.5" colour touchscreen, the instrument simplifies measurement logging and transfer into inspection routines or statistical process control systems. Wireless transfer reduces handling time and transcription errors, while the USB interface provides a direct option for offline data retrieval. The bright touchscreen improves readability in workshop lighting and speeds up on-device menu navigation. Together these features increase throughput in both the shop and the metrology room, helping to close the gap between measurement and corrective action. Robust, ergonomic design for repeatable handling Built for daily use, the micrometer features a friction ratchet for consistent tip pressure and a non-rotating spindle to prevent part rotation during measurement, aiding repeatability on delicate components. The measuring faces are larger disc faces (Ø20 mm) which distribute contact force and are advantageous when checking soft or thin-walled parts. Classified within the micro measurement category (maximum range up to 100 mm), this instrument is particularly well suited to fine mechanical tasks such as watchmaking, precision fittings and small-batch components where steady handling and minimal deformation matter. For tailored advice or to request the ISO 17025 calibration certificate and integration options for this Microtech Metrology micrometer (SKU 110780258), contact Metav Werkzeuge in Emmerich by phone or email Technical data Article number: 110780258 Brand: Microtech Metrology GTIN: 4061905041358 Facts Measuring range: 0–25 mm Resolution (reading): 0.0001 mm Accuracy: ±0.003 mm Display: Colour 1.5" touchscreen Special features Data output: Wireless, USB Protection class: IP65 Calibration: ISO 17025 certificate included Friction ratchet Non-rotating spindle Measuring faces: Disc Ø20 mm FAQ Is the micrometer supplied calibrated to a recognised standard? Yes. The Microtech Metrology micrometer (SKU 110780258) is delivered fully calibrated to ISO 17025 and includes the calibration certificate. What are the accuracy and resolution of this instrument? The instrument provides an accuracy of ±0.003 mm with a reading resolution of 0.0001 mm, suitable for high-precision inspection tasks. How can measurement data be transferred from the device? Measurement data can be exported via Wireless transfer or USB, enabling integration with data-collection software and straightforward logging into quality systems. Is the unit suitable for workshop use where coolant or dust is present? The micrometer has an IP65 rating, offering protection against dust ingress and low-pressure water jets, making it resilient for typical workshop environments. What handling features help ensure repeatable measurements? Repeatability is supported by a friction ratchet for consistent measuring force and a non-rotating spindle, together with larger disc measuring faces (Ø20 mm) that reduce part deformation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Micrometer With Fine Dial 0.001mm Resolution, Matt Chrome Finish, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.001 mm resolution, 0.003 mm measurement accuracy and hardened measuring faces for dependable, repeatable inspections; the analogue fine indicator and robust 6.5 mm spindle ensure stable contact and consistent readings. Order the M307.208 micrometer directly via Metav Werkzeuge or ask our consultants for tailored application advice. M307.208 micrometer screw gauge — 0–25 mm, 0.001 mm resolution (Metav IndustryLine) The M307.208 is a high-precision analogue micrometer screw gauge designed for fine mechanical and workshop inspection tasks, offering sub‑micrometre readability across the 0–25 mm measuring range. 0–25 mm measuring range 0.001 mm fine resolution 0.003 mm measurement accuracy Matt chrome-plated frame and spindle Achieve dependable repeatability with sub-micrometre readout Engineered for tasks where repeatable results matter, this micrometer combines a 0.001 mm resolution with a verified 0.003 mm accuracy to reduce measurement uncertainty in small components. The analogue fine indicator helps control approach speed and contact force, while the robust 6.5 mm spindle provides stable contact that minimises deflection during clamping. For quality control and workshop inspection this balance of resolution and mechanical stiffness supports fast, reliable decisions without complex setup. Hardened contact surfaces and corrosion-resistant finish for long service life The instrument features hardened measuring faces, which preserve accuracy in daily use by resisting wear at the contact points; maintenance needs are reduced and calibration intervals are extended. The matt chrome-plated frame and measuring drum give corrosion resistance and a steady tactile feel for the operator, making the instrument well suited to busy production environments and inspection benches where durability and consistent handling speed up measurement routines. Compact range for precision components and fine mechanical work With its 0–25 mm range the micrometer is aimed at fine mechanical work and small-part inspection: gauges, shafts, turned parts and similar components benefit from the compact geometry and high resolution. The analogue operation offers tactile feedback that many technicians prefer for delicate measuring tasks. The instrument’s straightforward mechanical design supports rapid measurements and straightforward integration into established metrology workflows. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine micrometer with 0.001 mm resolution can be integrated into your inspection routines and to request application-specific advice Technical data Article number: M307.208 GTIN: 4054469117454 eClass: 21170328 ETIM: EC003590 Category: Micrometer screw gauge (Messschrauben) Manufacturer: Metav IndustryLine Core data Measuring range: 0–25 mm Resolution: 0.001 mm Accuracy: 0.003 mm Spindle diameter: 6.5 mm Analogue: yes Materials and features Matt chrome-plated frame and measuring drum Hardened measuring faces Analogue fine indicator for controlled contact Tariff number: 90173000 FAQ How precise is the instrument? The micrometer provides a 0.001 mm resolution with a stated measurement accuracy of 0.003 mm, suitable for precise workshop and inspection tasks. Is this micrometer suitable for fine mechanical and small-part work? Yes. With a 0–25 mm measuring range and sub‑micrometre readout, the instrument is designed for fine mechanical components and small-part inspection. Are the measuring faces wear-resistant? Yes. The micrometer is supplied with hardened measuring faces to maintain contact accuracy and extend service life under regular use. What indicates controlled contact and fine adjustment? The analogue fine indicator assists in slow, controlled approach and repeatable contact pressure, improving measurement consistency on delicate parts. What finish and materials are used for durability? The frame and measuring drum are matt chrome-plated, providing corrosion resistance and a durable working surface for routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Micrometer With Fine Dial, 10mm Carbide Faces, 0.001mm Resolution, Delivered In Case - Metav IndustryLine
Take advantage of the combination of 0.001 mm resolution, carbide measuring faces and a controlled measuring force for precise, repeatable readings in fine mechanical inspection; order the instrument directly via Metav Werkzeuge or consult the Metav technical team for application advice. Micrometer with fine pointer 0–25 mm — mechanical micrometer, 0.001 mm resolution (Metav IndustryLine) The Micrometer with fine pointer 0–25 mm is a compact mechanical micrometer for fine‑precision measurement in workshop and laboratory contexts, offering a 0–25 mm range and carbide measuring faces for durable contact surfaces 0.001 mm resolution with fine pointer Carbide measuring faces, 10 mm diameter Delivered in protective case Suitable for fine mechanical work High resolution for decisive inspection results The micrometer provides a reading of 0.001 mm combined with a declared measurement accuracy of ±0.002 mm, which makes it a reliable instrument for metrology tasks that demand sub‑thousandth precision. The fine pointer improves the operator’s ability to interpolate between scale markings on an analogue instrument, while the mechanical design avoids electronic drift and simplifies long‑term traceability. The controlled measuring force (5–10 N) reduces variation from inconsistent contact pressure, so results are more reproducible during repeated sampling. Compact format tailored to fine mechanical applications Classified in the Mikro range (maximum measuring span up to 100 mm), this instrument is optimised where short jaws and torsion‑resistant geometry matter most. With a 0–25 mm measuring range and a 10 mm measuring spindle, it is particularly suited to watchmaking, micro‑assembly and component inspection where accessibility and stiffness are required in a small envelope. The carbide measuring faces resist wear when used on harder materials, extending the usable life of the contact surfaces and maintaining measurement integrity. Durable build for consistent workshop performance Analogue construction and hardened contact surfaces provide robustness for routine shop‑floor use. The carbide tips protect against premature abrasion, which helps preserve the calibrated zero and dimensional reference over time. The instrument’s mass and mechanical finish support steady handling and reduce the likelihood of errors due to vibration or transient hand movement; this contributes directly to lower measurement scatter in quality checks and smaller correction quotas in production. Practical handling, storage and integration Delivery in a protective case simplifies transport and on‑bench storage, keeping the instrument clean and protected between uses. The straightforward analogue operation requires no batteries or software, making the device immediately deployable for inspections and incoming goods control. As a metrology partner, Metav IndustryLine supplies this micrometer as part of a broader precision portfolio, enabling consistent measuring practice across multiple workstations and easing inventory management for procurement teams. For procurement or application guidance with Metav IndustryLine micrometers, contact Metav Werkzeuge for purchase and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M307.204 GTIN: 4054469151878 Category: Messschrauben Label: Mess mit Feinzeiger 0 - 25 mm mit HM‑Messflächen 10 mm, Ablesung 0,001 mm Facts Measuring range: 0–25 mm Reading / resolution: 0.001 mm Accuracy: 0.002 mm Measuring force: 5–10 N Measuring spindle diameter: 10 mm Weight: 2.6 kg Customs tariff number: 90173000 Special features Carbide measuring faces (HM) Analogue mechanical micrometer with fine pointer Delivered in protective case for transport and storage Designed for fine mechanical and workshop inspection FAQ What measurement range does the instrument cover? The micrometer covers a measuring range of 0–25 mm, suitable for small‑format components and precision parts. What resolution and accuracy can be expected? The instrument provides a 0.001 mm reading resolution with a stated accuracy of ±0.002 mm, offering high‑precision results for detailed inspection. Are the measuring faces durable for repeated use? Yes, the measuring faces are made of carbide (HM), which improves wear resistance and helps maintain consistent contact geometry during repeated measurements. Is the micrometer suitable for watchmaking and micro‑assembly? Classified in the Mikro range, the micrometer’s compact jaws and stiffness make it well suited to watchmaking, micromechanics and other fine‑precision applications. Does the delivery include protective packaging? The instrument is supplied in a protective case to secure the micrometer during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Micrometer With Large Anvil 0.01mm Resolution, Ratchet Stop, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 0–25 mm measuring range, 0.01 mm graduation and a ratchet thimble for consistent contact pressure — ideal for routine thickness checks on cutters and small parts. Order directly via Metav Werkzeuge or consult our specialists for application advice. M309.011 micrometer with large anvil — 0–25 mm, 0.01 mm graduation (Metav IndustryLine) The M309.011 micrometer is a compact mechanical micrometer with a large anvil, designed for accurate thickness measurement of small workpieces and cutting tools in workshop and production environments Large measuring anvil for flat workpieces 0.01 mm graduation for clear readings Accuracy: 0.005 mm for fine control Ratchet thimble for constant measuring force Supplied in transport case for safe storage Dependable precision for everyday measurement tasks This micrometer delivers a measured balance of range and fineness: 0–25 mm span with a 0.01 mm scale means straightforward readings for routine quality checks, while the stated ±0.005 mm accuracy supports tighter tolerances where they matter. The large anvil simplifies measurement of flat, slightly irregular surfaces such as disc cutters, and the mechanical design avoids electrical dependencies — a practical choice for shop floors where robustness is essential. The instrument’s compact form and approx. 0.5 kg mass make it easy to handle without sacrificing stability. Built to maintain measurement consistency and longevity A ratchet thimble ensures repeatable measuring force and reduces operator-induced variance, turning a technical feature into a clear production benefit: fewer re-measures and more consistent process control. The body features a painted frame and a matt-chromed spindle, both chosen to resist wear and to preserve contact surfaces. Delivery in a transport case protects the instrument between shifts and during storage, reducing the risk of damage and downtime. These design choices extend service life and lower total cost of ownership in daily use. Practical applications and supply confidence This micrometer is well suited to thickness checks on cutting tools, thin components and precision parts in general manufacturing and tool rooms; its combination of clear readout and reliable contact control speeds up inspection routines and aids first-off checks. Metav Werkzeuge supplies the product as part of a broad measurement portfolio, supported from Emmerich with a steady logistics and quality-filter approach — a supplier proposition that brings operational continuity and reduces sourcing complexity for workshops and procurement teams. Contact Metav Werkzeuge for tailored advice on the M309.011 micrometer and to confirm suitability for specific applications — Metav Werkzeuge GmbH, Parkring 45, Emmerich; eMail info@metav-werkzeuge.com; Tel +49 2822 7131930 Technical data Article number: M309.011 GTIN: 4054469117539 Range: 0–25 mm Resolution: 0.01 mm Accuracy: 0.005 mm Weight: 0.5 kg Facts Analog micrometer Ratchet thimble present Supplied in transport case Special features Frame painted Measuring drum matt-chromed Category: Micrometers / Messschrauben Harmonised tariff number: 90173000 FAQ What measurement range and resolution does this micrometer offer? The micrometer covers 0–25 mm with a 0.01 mm graduation, allowing clear, repeatable readings for small-part thickness checks. How accurate is the instrument in typical use? The M309.011 micrometer is specified with an accuracy of ±0.005 mm, which supports fine-control inspections in workshop environments. Is the micrometer supplied with protection for transport and storage? Yes — the instrument is supplied in a transport case to protect the tools between uses and during storage. What feature ensures consistent measuring pressure? A ratchet thimble provides a controlled measuring force, reducing operator-induced variation and improving repeatability. For which applications is the large anvil particularly useful? The large anvil is advantageous when measuring flat surfaces and tools such as disc cutters or thin workpieces where a broader contact area improves stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Micrometer With Large Drum And Friction Ratchet, Matt Chrome Measuring Drum, DIN 863 - Metav IndustryLine
Take advantage of precise mechanical repeatability and an easy‑to‑read large drum for reliable small-part inspection; the solid construction and ratchet stop support consistent results in fine mechanics. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Micrometer M304.248 (0–25 mm) with large drum and ratchet stop — Metav IndustryLine The Micrometer M304.248 is a compact frame micrometer designed for high‑precision measurements of small components in workshop and fine‑mechanical environments. Large matt‑chrome‑plated measuring drum Ratchet stop for consistent measuring force Measuring range 0–25 mm for micro applications Conforms to DIN 863 with hardened measuring faces Precise readings for small tolerances The instrument provides a clear mechanical graduation with a reading step of 0.01 mm, making it suitable where small deviations matter. The spindle uses a 1 mm pitch, which, combined with the 8 mm spindle diameter, gives a tactile, predictable feel when approaching the measurement point. Conformity to DIN 863 ensures the micrometer meets recognised workshop standards, while the analogue design keeps the operation straightforward and free from electronic dependencies — an advantage in many production and maintenance settings. Designed for repeatable, fatigue‑resistant measurement Classified in the micro range (0–25 mm), this frame micrometer is optimised for tasks that require both compactness and stiffness, such as watch components, small machined parts or precision assemblies. The built‑in ratchet stop delivers a constant measuring force so that successive readings remain comparable, and the hardened measuring faces maintain edge stability under regular use. At roughly 0.5 kg, the tool balances solidity and manoeuvrability for one‑hand operation during repetitive checks. Robust finish and user‑friendly handling A matt‑chrome‑plated measuring drum with enlarged diameter improves legibility and reduces glare under workshop lighting, speeding up routine inspections. The instrument is supplied in a protective case suitable for transport, helping to prevent shock and contamination between uses. The mechanical build resists common workshop stresses, and the choice of materials supports long service life with minimal maintenance. Practical workshop integration and supply benefits As a straightforward mechanical micrometer, this model slots into standard inspection workflows without additional infrastructure. The simple adjustment and clear scale reduce training overhead, while the compact form and conformity to established standards make it a reliable baseline tool for quality control stations. Metav’s distribution in Emmerich offers a dependable logistics and quality‑screening layer, simplifying procurement for small and medium‑sized workshops as well as industrial buyers. Contact Metav Werkzeuge today for specific application advice and to request the Micrometer M304.248 for precision measurement tasks that demand repeatability and easy handling Technical data Article number: M304.248 GTIN: 4054469116556 Category: Micrometers / Measuring instruments Facts Measuring range: 0–25 mm Resolution (graduation): 0.01 mm Spindle pitch: 1 mm Spindle diameter: 8 mm Weight: 0.5 kg Special features Ratchet stop for reproducible measuring force Matt‑chrome‑plated measuring drum Hardened measuring faces Analogue mechanical micrometer Conforms to DIN 863 Supplied in protective case for transport FAQ What is the smallest increment readable on the micrometer? The Micrometer M304.248 delivers a mechanical graduation of 0.01 mm, allowing clear differentiation of hundredths of a millimetre. Is this instrument suitable for watchmaking or micro components? Yes. With a 0–25 mm measuring range, the device is classified in the micro bracket and is ideal for watch components and small precision parts. Does the micrometer provide a constant measuring force? The instrument features a ratchet stop which ensures a consistent measuring pressure for repeatable results with the Micrometer M304.248. Are the measuring faces durable for frequent use? The measuring faces are hardened, which increases wear resistance and stabilises results during regular workshop inspections. What standard does the tool comply with? This micrometer conforms to DIN 863, reflecting common workshop and inspection standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Micrometer With Offset Measuring Faces 0.01mm Resolution, Ratchet, Ø2mm Measuring Faces, Supplied In Case - Metav IndustryLine
Take advantage of precise mechanical measurement, repeatable contact force and hardened offset faces for reliable shop‑floor inspection; order directly via Metav Werkzeuge or consult our specialists for application advice. M307.011 outside micrometer – 0–25 mm, 0.01 mm thimble, Metav IndustryLine A M307.011 outside micrometer designed for shop and toolroom use, offering fine graduations and offset measuring faces for measurements in tight or stepped areas 0–25 mm measurement range 0.01 mm resolution Ratchet stop for repeatable force Hardened offset measuring faces Accuracy that reduces rework and speeds inspection The micrometer delivers a 0–25 mm measuring span with a 0.01 mm thimble division and an overall accuracy of ±0.005 mm, providing a balance of reach and precision suitable for toolmaking and routine quality control. The spindle has a 0.5 mm pitch for consistent advance per thimble revolution; combined with the fine graduation, this allows reliable readings on shafts, small housings and turned parts. The compact measuring faces (Ø 2 mm, 5 mm length) access narrow features and stepped shoulders where standard faces would not reach, reducing the need for auxiliary fixtures and saving setup time. Consistent contact and robust construction for daily workshop use A built‑in ratchet stop ensures a constant measuring force, minimising variability from operator technique and helping to maintain tight tolerances across repeated checks. The instrument's painted frame absorbs knocks and resists corrosion while the hardened measuring faces stand up to wear in abrasive shop environments. The mechanical design and materials focus on repeatability and longevity, so inspection cycles stay short and replacement frequency is reduced—an operational saving that benefits production throughput. Practical handling and delivery tailored to professionals The analogue format offers immediate readings without batteries, ideal for bench checks and in‑process inspection. Delivery includes a protective case for safe transport and storage, keeping calibration and faces intact between uses. Traceable identification such as GTIN is provided for inventory control and procurement. As part of the Metav IndustryLine, this micrometer fits a broader range of workshop equipment backed by a European supply base and direct access to technical advice, supporting smooth integration into existing inspection workflows. For procurement or technical matching, contact Metav Werkzeuge for tailored advice and ordering assistance—Metav’s team in Emmerich will advise on suitability for specific applications and delivery options. Technical data Article number: M307.011 GTIN: 4054469117249 eClass: 21170328 TARIC / customs code: 90173000 Numbers / Core technical data Measuring range: 0–25 mm Resolution / thimble division: 0.01 mm Accuracy: ±0.005 mm Spindle pitch: 0.5 mm Measuring face diameter: 2 mm Measuring face length: 5 mm Reading: analog Designs / Special features Painted frame Ratchet stop Hardened offset measuring faces Supplied in transport case Category: Messschrauben FAQ What is the measuring range and resolution of this micrometer? The M307.011 outside micrometer covers 0–25 mm with a thimble resolution of 0.01 mm. How repeatable are measurements with the M307.011? Repeatability is supported by the integrated ratchet stop; the instrument’s stated accuracy is ±0.005 mm for stable, repeatable readings. Are the measuring faces durable for workshop use? Yes, the measuring faces are hardened and designed to withstand regular contact with metal workpieces. Does the micrometer come with a protective case? The instrument is supplied in a transport case to protect the tool during storage and transit. Can the M307.011 be used for narrow or stepped features? The offset measuring faces (Ø 2 mm, 5 mm long) allow access to stepped shoulders and narrow bores where standard faces would obstruct measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Micrometer With Pointed Measuring Faces, Colour Touchscreen, IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of high-resolution measurement, robust shop-floor protection and modern data transfer to shorten inspection cycles and secure traceable results; order this micrometre directly via Metav Werkzeuge or consult our specialists for application advice. Micrometre with pointed measuring faces and microcomputer — Digital 0–25 mm micrometre, IP65, Microtech Metrology The Micrometre with pointed measuring faces and microcomputer is a compact, industry-ready micrometre designed for precise dimensional checks on small parts and fine components in production and laboratory environments. 0.003 mm measurement accuracy ISO 17025 calibration certificate included Colour 2.4" touchscreen display Wireless and USB data transfer options Faster, traceable precision for small-part inspection The micrometre delivers 0–25 mm measuring range with a repeatable resolution that supports a stated 0.003 mm accuracy, making it suitable for tasks where micrometric control matters. Classified in the "Micro" range (measurement range up to 100 mm), this device is intended for fine mechanical work such as gauge checks, small bore and pin measurements or precision assemblies. The inclusion of an ISO 17025 calibration certificate ensures measurement traceability from delivery and supports laboratory and quality‑assurance documentation. A friction ratchet and rotating spindle help maintain consistent contact force and minimise operator influence during each reading. Integrated data management to streamline quality workflows Designed for Industry 4.0 environments, the instrument combines local storage and multiple transfer modes to cut paperwork and manual logging. The built‑in memory manager holds up to 2000 values, organised in folders with statistical summaries, while four data-transfer modes (wireless to MDS app, Wireless HID, Wireless HID+MAC and USB HID) enable immediate capture into inspection software. Optional Modbus RTU (RS‑485) output is available for direct PLC or SCADA integration, allowing the micrometre to feed production control systems. Functions such as temperature and linear correction, Go/No‑Go checks and on‑line graphing reduce interpretation errors and accelerate decision making on the shop floor. Robust handling and intuitive operation for everyday use For workshop conditions the instrument offers an IP65 protection rating and a CNC machined aluminium housing, which together resist coolant splash and routine mechanical stress. A colour 2.4" touchscreen provides clear readouts and menu access for modes like Max/Min, formula calculations and probe measurements, while the pointed measuring faces give access to small grooves and narrow contact points that standard anvils cannot reach. The combination of tactile controls, a reliable ratchet stop and durable construction reduces rework risk and extends service life, supporting continuous inspection cycles in production environments. Choose the Microtech Metrology micrometre for reliable small‑part measurement and contact Metav Werkzeuge in Emmerich for detailed specifications, calibration documentation and rapid supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 110450258 GTIN: 4061905040801 Manufacturer: Microtech Metrology Category: Micrometres Facts Measuring range: 0–25 mm Resolution / display step: 0.0001 mm Stated accuracy: 0.003 mm Memory capacity: 2000 values Protection class: IP65 Display: Colour 2.4" touchscreen Calibration: ISO 17025 certificate included Special features Pointed measuring faces Friction ratchet Rotating spindle CNC machined aluminium housing Wireless + USB data output Wireless modes: MDS app, HID, HID+MAC Optional Modbus RTU (RS‑485) On‑line graphing, Max/Min, Go/No‑Go Temperature and linear correction 2000-value folder system and statistics FAQ What is the measuring range and typical accuracy of this micrometre? The micrometre measures from 0–25 mm with a stated accuracy of 0.003 mm, making it suitable for high‑precision small‑part inspection; SKU 110450258 from Microtech Metrology is delivered with traceable calibration. Is a calibration certificate supplied with the instrument? Yes — the device is supplied fully calibrated and includes an ISO 17025 calibration certificate for laboratory and quality assurance use. Which data transfer options are available for automated logging? Data can be transferred wirelessly to the MDS app, via Wireless HID, Wireless HID+MAC or by USB HID; an optional Modbus RTU interface is also offered for direct industrial connections. Can the micrometre be used on the shop floor under harsh conditions? The unit features an IP65 rating and a CNC machined aluminium housing, providing resistance to dust and splash and making it suitable for typical workshop environments. What advantages do the pointed measuring faces and friction ratchet provide? Pointed measuring faces reach narrow grooves and fine features, while the friction ratchet ensures consistent contact force and repeatable results, improving measurement reliability for small components. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Micrometer With Ratchet And Matt Chrome Thimble, Case Included - Metav IndustryLine
Take advantage of precise repeatability and a robust workshop design: the combination of a ratchet stop, hardened measuring faces and a 0–25 mm measuring range delivers consistent, reproducible results for fine mechanical work. Order the micrometer directly via Metav Werkzeuge or consult our specialists for specification support. Micrometer M304.608 (0–25 mm) — Ratchet stop, matt chrome thimble The Micrometer M304.608 is a compact 0–25 mm micrometer designed for high-precision workshop and fine mechanical measurements, combining simple analogue reading with a robust, transport-ready construction 0.01 mm resolution for fine measurement Ratchet stop for reproducible contact Hardened measuring faces for wear resistance Repeatable precision for everyday metrology The instrument is optimised for reliable, repeatable measurement in routine quality checks and workshop use. With a 0–25 mm measuring range and 0.01 mm graduation on the thimble, the mechanical design supports quick, unambiguous readings while the ratchet stop ensures a constant measuring force to reduce operator variation. Compliance with DIN 863 underlines manufacturing and dimensional standards, so results are consistent across production batches and inspection points. Robust construction that endures workshop demands A painted frame provides corrosion protection and tactile grip, while the matt chrome thimble resists reflections that can impede clear reading. The instrument’s hardened measuring faces reduce wear and prolong useful life even under frequent use. The compact form factor and solid spindle geometry make the tool straightforward to handle in confined setups; the spindle diameter of 6.5 mm contributes to stiffness and alignment stability during measurement cycles. Practical handling and efficient operation Designed with workshop ergonomics in mind, the instrument’s spindle pitch 0.5 mm allows controlled advance and fine adjustment, speeding up repetitive tasks without sacrificing accuracy. The analogue thimble provides a tactile feedback loop that many technicians prefer for quick checks. Supplied in a transport case, the micrometer is protected during transit and storage, reducing the risk of shock or contamination between uses. Ideal applications and suitability Classified within the Micro range for small-scale metrology, this micrometer suits fine mechanical trades, precision maintenance, and component inspection where reach under 100 mm is required. Its combination of a compact measuring range, durable faces and a ratchet mechanism makes it particularly suited to inspection benches and toolrooms that prioritise repeatability and low-maintenance operation. Contact Metav Werkzeuge for tailored advice or to request delivery of the Metav IndustryLine micrometer M304.608 with ratchet stop and hardened measuring faces — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: M304.608 GTIN: 4054469117133 Standard: DIN 863 Type: Analog micrometer Core measurements Measuring range: 0–25 mm Resolution: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Range min: 0 mm Range max: 25 mm Materials & features Frame painted Thimble matt chrome Hardened measuring faces Ratchet stop included Supplied in a transport case Category: Micrometers (Messschrauben) FAQ What is the smallest increment readable on this micrometer? The micrometer M304.608 has a thimble graduation of 0.01 mm, suitable for standard workshop precision checks. Does the instrument comply with recognised standards? Yes, the instrument is manufactured to DIN 863, ensuring consistent dimensional criteria for workshop metrology. Are the measuring faces durable for frequent use? The micrometer M304.608 features hardened measuring faces, which provide increased wear resistance for regular inspection cycles. Is the micrometer supplied ready for transport and storage? The device is delivered in a protective case, designed to safeguard the instrument during transport and storage. What benefit does the ratchet stop provide? The ratchet stop on this micrometer guarantees a uniform measuring force, improving repeatability and reducing operator-induced variation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Micrometer With Spherical Anvil 0.01mm Graduation, Ratchet Stop, Matt Chromium Sleeve, Packed In Case - Metav IndustryLine
Take advantage of 0–25 mm measuring range and 0.01 mm resolution combined with a robust painted frame and ratchet stop for repeatable shop‑floor results; order or request advice directly via Metav Werkzeuge for seamless supply and technical support. M309.042 micrometre (0–25 mm, 0.01 mm) — Metav IndustryLine The M309.042 is a workshop micrometre designed for precise external measurements across small components and parts; its combination of a rounded anvil and ratchet stop makes it suitable for assembly and inspection tasks. 0.01 mm resolution for fine measurements Rounded anvil for reliable contact Ratchet stop for consistent measuring force Painted frame with matt‑chromed sleeve Precision that pays off in everyday measuring This micrometre delivers a readable 0.01 mm resolution and an implied repeatable error of ±0.004 mm, which places it well above basic hobby tools and into the realm of professional workshop metrology. The analogue drum scale is quick to read and, with the integrated ratchet stop, the instrument limits operator‑induced variation by ensuring a consistent measuring force for each contact. For routine quality checks and setup work, this balance of clarity and control shortens cycle times and reduces rework. Built to withstand the workshop environment A painted frame provides durable protection against knocks and handling, while the matt‑chromed measuring sleeve resists wear and keeps graduations legible. The combination of a compact form factor and a total weight of 0.4 kg makes the instrument easy to handle during long inspection runs without sacrificing stability. The spindle finish and frame design focus on longevity, so maintenance intervals are extended and downtime is reduced. Measurement features explained for practical use The instrument uses a rounded anvil paired with a flat measuring face, a configuration that helps centre cylindrical parts and reduces point loading on small diameters. The spindle has a 0.5 mm pitch, giving tactile, predictable advance with each turn; the spindle diameter of 6.5 mm adds stiffness where it matters most. These characteristics simplify comparison measurements and positioning tasks in metalworking and light engineering. Suitable applications and handling notes Engineers and technicians in assembly, small‑series production and inspection will find the instrument suitable for external dimension control of shafts, pins and turned parts. The analogue readout and mechanical ratchet are particularly useful where electronic systems are unnecessary or would complicate setup. Regular cleaning of contact faces and light lubrication of the spindle will preserve accuracy and operational feel. For reliable workshop precision from the Metav IndustryLine range, contact Metav Werkzeuge in Emmerich for supply and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M309.042 GTIN: 4054469117683 eClass: 27200302 ETIM: EC003590 Tariff number: 90173000 Facts Measuring range: 0–25 mm Resolution: 0.01 mm Accuracy: ±0.004 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Weight: 0.4 kg Display type: analogue Special features Frame: painted Measuring sleeve: matt‑chromed Measuring faces: rounded anvil and flat face Ratchet stop: yes Category: Micrometres / Measuring screw Manufacturer: Metav IndustryLine FAQ What measuring range does this instrument cover? The M309.042 micrometre covers a 0–25 mm measuring range, making it ideal for small external measurements in workshop and inspection environments. How fine are the readings and how accurate is the micrometre? Readings are at 0.01 mm resolution and the device achieves an accuracy of ±0.004 mm, suitable for routine precision work on turned and machined parts with the Metav IndustryLine quality standard. Why is the rounded anvil useful? A rounded anvil helps centre cylindrical parts and reduces local deformation on small diameters, which improves repeatability when using this micrometre for shaft and pin measurements. Does the instrument include a ratchet stop and why does that matter? Yes — the ratchet stop ensures a reproducible measuring force on each measurement, which reduces operator‑induced error and supports consistent results with the M309.042 micrometre. What materials and finishes are used on the micrometre? The frame is painted for durability and the measuring sleeve is matt‑chromed to protect graduations and reduce wear while maintaining legibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com