Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
25mm Universal Caliper 0.01mm Resolution, Tungsten Carbide Measuring Faces, Friction Ratchet, Case Included - Metav IndustryLine
Combine a compact 0–25 mm measuring range with a 0.01 mm readout and carbide measuring faces for repeatable, workshop-ready precision; order the Universal micrometer M309.041 directly via Metav Werkzeuge or ask our consultants if needed Universal micrometer M309.041 — 0–25 mm, 0.01 mm resolution The Universal micrometer M309.041 is a precision analogue micrometer designed for fine mechanical and general workshop measurement tasks with a compact 0–25 mm range and carbide measuring faces Friction ratchet for reproducible pressure Carbide measuring faces for wear resistance Resolution 0.01 mm with ±0.004 mm accuracy Includes cylindrical and flat measuring inserts Repeatable precision for small-part inspection The micrometer delivers reproducible measurements through a built-in friction ratchet, which limits the applied measuring force and reduces operator variation. The combination of a 0–25 mm measuring range with a 0.01 mm readout makes this instrument suitable for tasks that demand fine resolution without sacrificing handling. The presence of carbide measuring faces provides wear resistance on contact zones, extending service life and maintaining measurement constancy in regular production use. This paragraph explains why the tool reduces rework and supports reliable quality control at the bench. Flexible measuring options that adapt to the task Designed as a universal measuring instrument, the micrometer includes a cylindrical insert Ø 3.0 mm and a flat insert d=1.5 mm, width 5 mm, enabling measurements of shafts, grooves and step depths without improvised adapters. The analogue design keeps operation straightforward: the spindle pitch of 0.5 mm and the precision screw mechanism provide direct feel and fast setting. Delivered in a protective case for safe transport and storage, the instrument balances compact handling with the functional versatility required in toolrooms and small-series production. Engineered for workshop reliability and efficient quality checks With an indicated accuracy of 0.004 mm, this micrometer supports tight tolerances typical in precision engineering and maintenance work. The robust measuring faces and construction mean fewer calibration interventions and a predictable service life under normal shop conditions. Metav’s supply concept adds value here: items pass through a quality filter in Emmerich so procurement teams can rely on consistent product standards and uninterrupted stock. The instrument is therefore a practical choice where dependable measurement performance must be combined with straightforward maintenance and handling. Contact Metav Werkzeuge for ordering or for a technical consultation regarding the Metav IndustryLine universal micrometer M309.041 with carbide measuring faces Technical data Article number: M309.041 GTIN: 4054469117676 Tariff number: 90173000 Numerical data Measuring range: 0–25 mm Readout / resolution: 0.01 mm Accuracy: 0.004 mm Measuring face diameter: 6.5 mm Weight: 0.4 kg Spindle pitch: 0.5 mm Design & features Carbide measuring faces Friction ratchet for repeatable measuring force Analogue micrometer (mechanical) Includes cylindrical insert Ø 3.0 mm and flat insert d=1.5 mm, width 5 mm Protective case for transport FAQ What is the measuring range and resolution of this micrometer? The Universal micrometer M309.041 offers a measuring range of 0–25 mm with a readout resolution of 0.01 mm. Are the measuring faces suitable for heavy daily use? Yes, the micrometer is equipped with carbide measuring faces, which are highly resistant to wear and suited to frequent contact in workshop environments. Which specific applications are supported by the supplied inserts? The supplied cylindrical insert (Ø 3.0 mm) and flat insert (d=1.5 mm, width 5 mm) allow measurements on shafts, groove depths and step features without additional tooling. How does the friction ratchet improve measurement quality? The friction ratchet ensures a reproducible measuring force on each reading, reducing operator-induced variation and improving repeatability of the results with the M309.041. Is the instrument supplied ready for use and protected in transit? The micrometer is supplied in a protective case for transport and storage; accessories are included and the device is ready for workshop use upon receipt. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Universal Micrometer 0.01mm Resolution Movable Anvil, 7 Insert Pairs, Supplied In Case - Metav IndustryLine
Precision, adaptability and dependable workshop performance make the Universal Micrometer M309.170 a practical choice for fine‑scale measurement tasks; its 0.01 mm graduation and adjustable anvil support repeatable readings across small components. Order the micrometer directly via Metav Werkzeuge or consult the team for application advice. Universal Micrometer M309.170 — 0–25 mm, 0.01 mm graduation, adjustable anvil (Metav IndustryLine) The Universal Micrometer M309.170 is a micro‑range measuring instrument designed for precision tasks in inspection, toolmaking and fine mechanical workshops. 0–25 mm micro range, 0.01 mm graduation Movable anvil for versatile measurement options Includes 7 pairs of measuring inserts Ratchet stop for consistent measuring force Consistent, measurable accuracy for micro components This micrometer is engineered for the micro range (0–25 mm) where stiffness and repeatability are essential. The instrument delivers a 0.01 mm reading step on an analogue scale, which fits standard industrial requirements for fine measurements. The ratchet stop prevents over‑tightening and ensures a reproducible measuring force, reducing operator‑induced variation. For workshop routines and quality checks that demand reliable small‑scale inspection, the instrument provides a clear balance of reach and rigidity. Versatility through adjustable contact geometry and robust spindle A key advantage is the movable anvil, which increases adaptability when measuring awkward or profiled parts; the package includes 7 pairs of measuring inserts to match different contact surfaces. The rotating spindle with a 6.5 mm diameter combines smooth travel with structural stability, helping to protect both the workpiece and the measuring faces. Supplied inserts reduce setup time and allow quick switching between flat and specialised contacts, which is particularly useful in sampling runs or when inspecting diverse series of small components. Workshop resilience and traceable workmanship Constructed with a matt chrome‑plated measuring drum, the instrument resists glare and offers durable surface protection suitable for daily workshop use. The mechanical design and analogue readout mean straightforward servicing and long service life under normal working conditions. The micrometer is supplied to factory standard, reflecting the manufacturer's internal verification process; this makes it suitable for routine quality control and component inspection in both craft and light industrial environments. The weight and balance support practical handling during single‑person tasks. Contact Metav Werkzeuge for tailored technical advice and to request a quotation for the Metav IndustryLine Universal Micrometer M309.170 Technical data Article number: M309.170 GTIN: 4054469118468 ECLASS: 21170328 Tariff number: 90173000 Core figures Measuring range: 0–25 mm Resolution / graduation: 0.01 mm Spindle diameter: 6.5 mm Weight: 0.7 kg Reading: analogue Features & materials Movable anvil 7 pairs of measuring inserts included Ratchet stop for consistent measuring force Rotating spindle for smooth operation Matt chrome‑plated measuring drum Supplied to factory standard (Werksnorm) FAQ What is the smallest increment that can be read with this micrometer? The Universal Micrometer M309.170 provides a 0.01 mm graduation, allowing standard fine measurements within the micro range. Is the anvil adjustable and are additional measuring faces included? Yes — the instrument has a movable anvil and is supplied with 7 pairs of measuring inserts for flexible contact geometry. Is the instrument suitable for routine workshop inspection of small components? The M309.170 is designed for micro‑range inspection and workshop use, offering a durable matt chrome‑plated measuring drum and a ratchet stop for repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2600-2800mm Digital Micrometer With IP65 Protection, ISO 17025 Calibration Certificate, Friction Ratchet - Microtech Metrology
Take advantage of the combination of wide measuring range, laboratory-grade traceability and rugged, IP65‑protected electronics for reliable large‑format dimension control; order the instrument directly via Metav Werkzeuge or consult Metav’s specialists for integration support. Outside micrometer — Digital, 2,600–2,800 mm range (Microtech Metrology) An outside micrometer engineered for large‑format dimensional checks in heavy fabrication, metrology laboratories and inspection stations, offering a sealed digital head and laboratory calibration for immediate use. Digital readout with IP65 protection Calibrated to ISO 17025 standard 2,600–2,800 mm measuring range Ø50 mm measuring faces and friction ratchet Accurate large‑format measurement with laboratory resolution The instrument combines a very broad measuring span with fine resolution to make measurements of substantial components both feasible and reproducible. With a 2,600–2,800 mm measuring range and a display resolution of 0.001 mm, the device delivers detailed indication across long spans while retaining a declared nominal accuracy of ±0.055 mm. This balance between range and resolution reduces the need for multiple tools and shortens inspection loops, directly supporting efficient production control and fewer dimensional rejects. Ready for audits: traceable calibration and inspection documentation Delivered with an ISO 17025 calibration and accompanying calibration certificate, the micrometer is prepared for formal quality procedures and incoming‑goods checks. The certificate documents traceability and measurement uncertainty in line with recognised laboratory standards (ILAC‑MRA acceptance), which simplifies audit preparation and helps maintain compliance when the instrument is used for release or acceptance measurements. Robust construction designed for demanding shop environments The sealed digital measuring head is rated IP65, protecting electronics from dust and water jets and permitting use at the machine bench or in harsher production zones. Large Ø50 mm measuring faces paired with a friction ratchet ensure consistent contact force and minimise operator‑introduced variation. The set includes setting rods, streamlining periodic verification and on‑site zeroing without additional accessories, while the instrument’s solid frame supports repeatable results on heavy components. Practical handling and workflow benefits The digital interface and rugged design reduce setup time and accelerate serial checks on long components; the wide range means fewer tool changes and a more direct measurement process for shafts, housings and large fixtures. The instrument’s features focus on measurable workflow gains: faster inspection cycles, greater reproducibility and documented traceability. For production environments that demand both reach and reliable data, this solution integrates precision with industrial durability. Contact Metav Werkzeuge for a technical consultation on integrating the Microtech Metrology outside micrometer into measurement routines and to obtain the instrument with its ISO 17025 calibration certificate; Metav’s specialists will advise on mounting, handling and documentation. Technical Data Article number: 110172801 GTIN: 4061905039461 Manufacturer: Microtech Metrology IP protection: IP65 Measuring range: 2,600–2,800 mm Resolution: 0.001 mm Accuracy: ±0.055 mm Measuring faces: Ø50 mm Weight: 30.5 kg Setting rods: included Calibration: ISO 17025 certificate included (ILAC‑MRA) Numbers / Core technical data Measuring range min: 2,600 mm Measuring range max: 2,800 mm Display resolution: 0.001 mm Accuracy: ±0.055 mm Measuring face diameter: 50 mm Weight: 30.5 kg Special features Digital readout with IP65 sealing Friction ratchet for reproducible measuring force Setting rods supplied ISO 17025 calibration and certificate included Robust frame for large components Designed for industrial metrology applications FAQ What resolution and accuracy does the instrument offer? The Microtech Metrology outside micrometer provides a display resolution of 0.001 mm and a declared accuracy of ±0.055 mm, suitable for detailed large‑format inspections. Is the micrometer ready for use in formal quality checks? Yes — the instrument is supplied with an ISO 17025 calibration certificate, so it can be used directly in documented quality procedures and audits. Can the instrument be used in dusty or wet production areas? The sealed digital head is IP65 rated, protecting the electronics from dust and water jets; the instrument is therefore suitable for many harsh shop‑floor conditions with appropriate mounting and handling. What measuring faces and handling aids are included? The device features Ø50 mm measuring faces and a friction ratchet to ensure consistent contact force; setting rods are included to support quick verification and adjustment. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2600-2800mm Micrometer With Wide-Range Digital Display, ISO 17025 Calibrated - Microtech Metrology
Product data contains inconsistencies: the specification lists an accuracy of 0.042 while the description refers to a sub‑micron micrometer, and the display size is given as both 1.5" and 2.4". These discrepancies need to be addressed to ensure clarity and accuracy in the product information. Please verify and supply corrected technical specifications to resolve these issues. Without accurate and consistent data, it is not possible to create a reliable product description. Ensuring all details align will help avoid confusion and provide customers with the correct information about the product's features and capabilities.
275-300 mm Micrometer Caliper With Ratchet, 0.01 mm Graduation, Blue Powder Coating, With Measuring Faces, Wooden Case - Metav IndustryLine
Take advantage of a ratchet stop and 0.01 mm resolution across a wide 275–300 mm measuring range for consistent, repeatable external measurements; order directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine outside micrometer M304.419 — 275–300 mm, 0.01 mm resolution Metav IndustryLine outside micrometer M304.419 is a heavy‑duty workshop micrometer designed for precise external measurements on medium to large components, suitable for machine shops and inspection benches Ratchet stop for consistent measuring force 0.01 mm graduated reading Large 275–300 mm measuring range Compliant with DIN 863 standard Reliable repeatability for production and inspection The combination of a ratchet stop and a fine 0.01 mm graduation ensures highly reproducible readings, making this micrometer a pragmatic choice where process stability matters. The ratchet prevents over‑torque on the spindle, so measurements remain consistent even when multiple operators are involved. Conformance with DIN 863 confirms that the instrument meets recognised workshop standards, which supports quality control procedures and reduces measurement variability on serial parts. Robust construction for workshop environments A painted frame with a matt chrome‑plated measuring drum delivers corrosion resistance and long‑term durability under daily use. The spindle features a 0.5 mm pitch and a 6.5 mm diameter for a stable contact point and smooth travel, which helps to maintain measuring accuracy over the 275–300 mm range. The presence of true measuring faces provides reliable contact geometry; the overall construction favours a balance between stiffness and manageable handling during routine checks. Practical application and handling benefits This outside micrometer is aimed at machinists and inspection technicians who need dependable external measurements on larger workpieces that exceed standard caliper reach. The analogue readout is straightforward for quick checks and aligns with traditional workshop workflows, while the ratchet stop aids repeatable contact force. For customers seeking a no‑frills, mechanically robust instrument that integrates easily into existing inspection setups, this device supports efficient throughput without complex electronics. Contact Metav Werkzeuge for tailored advice on integrating the M304.419 into inspection routines or for help selecting complementary measurement tools Technical Data Article number: M304.419 GTIN: 4054469116983 Brand: Metav IndustryLine Standard: DIN 863 Facts Measuring range: 275–300 mm Resolution / Graduation: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 6.5 mm Special features Painted frame Matt chrome‑plated measuring drum Ratchet stop for consistent measuring force Analog (nonius) reading Measuring faces included eClass: 21170328 ETIM: EC003590 FAQ What is the exact measuring range of this micrometer? The Metav IndustryLine outside micrometer M304.419 covers a 275–300 mm measuring range, designed for larger external dimensions not easily reached with standard calipers. How precise is the instrument and which standard does it meet? The micrometer provides a 0.01 mm graduation and is manufactured in accordance with DIN 863, ensuring suitability for workshop inspection and routine quality control. Which features improve repeatability during serial measurements? The integrated ratchet stop and robust spindle mechanics of the Metav IndustryLine M304.419 reduce operator‑induced variance, delivering more consistent contact force and repeatable readings. Is a calibration certificate included with the micrometer? The product data does not specify an ISO 17025 calibration certificate for the Metav IndustryLine outside micrometer M304.419; please contact Metav Werkzeuge for information on available calibration services. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
275-300mm Digital Micrometer 0.001mm Resolution With Ratchet, Plastic Case - Metav IndustryLine
The combination of high-resolution measurement (0.001 mm), a ratchet stop for repeatable contact pressure, and conformity with DIN 863 supports reliable inspection routines and stable production control. Benefit from precise, digitally assisted readings and robust mechanical design; order the device directly via Metav Werkzeuge or contact our advisors for specification support. Digital micrometer M302.265 — 275–300 mm, 0.001 mm resolution (Metav IndustryLine) The Digital micrometer M302.265 is an outside micrometer intended for precise dimensional checks of medium-sized components in workshop and inspection environments. Digital display with ABS/INC/UNIT functions 0.001 mm resolution for micrometre readings Ratchet stop for consistent measuring force Protective transport case included Precise digital measurement that shortens inspection time Equipped with a resolution of 0.001 mm, this digital instrument provides readings that support fine tolerance checking and traceable quality control. The large digital display with ON/OFF/SET and ABS/INC/UNIT keys reduces reading errors and speeds up inspection cycles compared with analogue alternatives. Conformity to DIN 863 guarantees compatibility with established workshop procedures and inspection documentation, while the measuring faces Ø 6.5 mm increase the contact area for secure surface engagement without excessively concentrating force on delicate parts. Consistent contact and handling for repeatable results A built-in ratchet stop ensures a uniform measuring force, which reduces operator-dependent variation and improves repeatability during batch checks. The frame is painted for corrosion resistance and the measuring drum is matt-chrome plated, combining durability with clear tactile control. These mechanical choices mean the instrument is well suited for routine use in a busy metrology bench: robust enough for everyday handling, yet refined for demanding inspection tasks where reproducibility matters. Practical integration into workshop workflows With a measuring range of 275–300 mm, the device covers medium-sized components commonly found in fixtures, housings and assemblies. Numeric readout precision and the ABS/INC function enable quick switching between absolute and incremental measurement modes, which simplifies setting and comparative checks during set‑up or corrective maintenance. The instrument’s design supports efficient documentation of results and reduces downstream rework by catching deviations early in the process. Built for professionals who value clarity and reliability The instrument’s tactile design and clear functions reduce cognitive load during repetitive tasks, helping workshop staff maintain focus and throughput. Solid construction and standard-compliant measurement behaviour make the micrometer a dependable choice for quality engineers and skilled machinists who require consistent, verifiable data from their hand tools. The combination of digital convenience and mechanical precision offers a pragmatic balance for everyday industrial use. Choose Metav IndustryLine precision — contact Metav Werkzeuge for tailored technical advice and secure dispatch from Emmerich: call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M302.265 GTIN: 4054469151830 Category: Messschrauben Standard: DIN 863 Facts Measuring range: 275–300 mm Resolution: 0.001 mm Measuring faces: 6.5 mm Tariff number: 90173000 eClass: 21170328 ETIM: EC003590 Special features Digital display with ON/OFF/SET and ABS/INC/UNIT keys Ratchet stop for repeatable measuring force Frame painted, measuring drum matt-chrome plated Protective transport case included Conforms to DIN 863 FAQ What is the smallest increment this micrometer can measure? The Digital micrometer M302.265 provides a resolution of 0.001 mm, suitable for fine tolerance checks in workshop and inspection tasks. Does the instrument provide absolute and incremental readings? Yes — the device features ABS/INC functionality on the digital display, allowing immediate switching between absolute and incremental measurement modes. Is the micrometer suitable for routine shop-floor use? The Metav IndustryLine micrometer M302.265 combines a robust painted frame and matt-chrome measuring drum with a ratchet stop, making it well suited for regular workshop inspections. How does the ratchet stop improve measurements? The ratchet stop enforces a consistent contact pressure, which reduces operator-induced variation and improves repeatability across successive measurements. What documentation or standards does this micrometer follow? The instrument complies with DIN 863, ensuring standardised measurement behaviour and compatibility with common inspection procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
275-300mm Digital Three-Point Internal Micrometer For Blind Holes With Carbide Anvils, RB 4 Output, Plastic Case - Metav IndustryLine
Taking advantage of its 0.001 mm resolution and carbide measuring faces, this digital three‑point internal micrometer delivers repeatable blind‑hole measurements across the 275–300 mm range; the integrated RB 4 data output and a robust 140 mm measuring depth support seamless quality‑control workflows. Order the Digital three‑point internal micrometer directly via Metav Werkzeuge or consult our specialists if further advice is required. Digital three‑point internal micrometer M312.263.S (275–300 mm) — Carbide faces, RB 4 output The Digital three‑point internal micrometer M312.263.S is a precision instrument for reliable measurement of blind bores in production and inspection environments. Digital readout with mm/inch and hold function Carbide measuring faces for wear resistance Range 275–300 mm for large internal bores RB 4 data output for process integration Precise, traceable measurements with industrial integration The instrument combines a digital display with a fine 0.001 mm resolution and an overall measurement accuracy specified at ±0.009 mm, enabling tight tolerances to be checked quickly and confidently. The three‑point measuring head centres automatically in the bore, reducing operator influence and improving repeatability compared with single‑point probes. With a dedicated RB 4 data output, measured values are exported directly to process control or SPC systems, which shortens inspection loops and reduces manual transcription errors — a clear efficiency gain for production lines and inspection benches alike. Robust design for blind‑hole applications and everyday handling Engineered specifically for blind‑hole measurement, the gauge features carbide measuring faces that resist wear where contact pressure is concentrated. A measuring depth of 140 mm accommodates deep bores, while the instrument’s construction balances stiffness and handling for stable in‑bore seating. The device is supplied in a transport case to protect the tool in transit and storage; note that delivery is made without a setting ring, so traceable setting or calibration accessories should be arranged separately if required. The solid build and thoughtful ergonomics ensure consistent performance across repeated measurement cycles. Where this instrument adds value in the workflow The tool is suited to component manufacturers, toolrooms and quality departments that require accurate internal bore data without complex fixtures. Typical uses include inspection of housings, bearing seats and machined assemblies where blind bores are present. The combination of repeatable three‑point contact, digital readout functions (ON/0, mm/inch, ABS, PRESET, HOLD) and live data output supports both manual control checks and automated data collection strategies. Backed by Metav’s supply chain and quality filter in Emmerich, the device arrives ready for integration into existing measurement procedures and inventory systems. For dependable blind‑hole measurement and process connectivity, request the Metav IndustryLine digital three‑point internal micrometer (M312.263.S) from Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering. Technical data Article number: M312.263.S GTIN: 4054469159027 Category: Micrometers Manufacturer: Metav IndustryLine Facts Measuring range: 275–300 mm Measuring depth: 140 mm Resolution: 0.001 mm Accuracy: ±0.009 mm Weight: 5 kg Special features Carbide measuring faces (HM) Designed for blind‑hole (sackloch) measurement Digital display with ON/0, mm/inch, ABS, PRESET, HOLD Data output: RB 4 Supplied in transport case Delivery without setting ring FAQ How is the instrument best used for blind‑hole measurement? The digital three‑point internal micrometer centres in the bore by its three contact points, making the M312.263.S especially reliable for blind‑hole checks where fixed‑stop probes are impractical. What level of accuracy and resolution can be expected? The instrument provides a resolution of 0.001 mm with an overall accuracy of ±0.009 mm, allowing precise bore diameter assessment suitable for dimensional control tasks. Is data transfer to inspection software supported? Yes — the device includes an RB 4 data output for direct connection to process control and SPC systems, enabling automated data capture from the M312.263.S. Does the delivery include calibration or a setting ring? Delivery is made without a setting ring; calibration status is provided according to the supplier’s standard procedure and any specific calibration documentation should be requested prior to purchase. What protections are in place for transport and storage? The instrument is supplied in a transport case to protect the gauge during transport and storage, ensuring the measuring faces and electronics remain secure. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
275-300mm Ratchet-Stop Micrometer, 0.005mm Accuracy, ISO 17025 Calibration Certificate Included - Microtech Metrology
Take advantage of high metrological reliability and an integrated ratchet stop for consistent measuring force; combined with an ISO 17025 calibration certificate, this instrument supports reproducible quality control in production. For traceable external measurements over a 275–300 mm span with ±0.005 mm accuracy, order the micrometer directly via Metav Werkzeuge or consult our advisors for specification checks. Microtech Metrology micrometer — 275–300 mm, ±0.005 mm accuracy, ratchet stop The micrometer from Microtech Metrology is a workshop-grade external measuring instrument designed for precision control of medium-sized components in manufacturing and inspection. ISO 17025 calibration certificate included Measurement range 275–300 mm Accuracy ±0.005 mm Ratchet stop for constant measuring force Consistent traceability for production control The instrument delivers traceable results thanks to the supplied ISO 17025 calibration certificate, which documents laboratory calibration to recognised standards. With a measuring range of 275–300 mm the device is classified in the standard range, making it suitable for everyday machine‑shop and metalworking tasks where reach and stiffness must balance. The mechanical scale reads to 0.01 mm while the specified measurement uncertainty of ±0.005 mm supports strict process control and short sampling intervals without additional averaging. These characteristics make the gage an effective tool for entry checks, run‑out control and batch acceptance testing. Reduced operator influence and reliable handling A ratchet stop provides a repeatable measuring force that reduces variation from operator technique and improves repeatability between users. The compact anvil (Ø6.5 mm) and robust screw mechanism ensure stable contact and quick seating on shafts, rings or spacings, while the analogue construction avoids battery dependence for uninterrupted shop use. This combination of mechanical simplicity and controlled force leads to fewer re-measures and faster throughput on the shop floor, helping maintain steady production takt times. Practical applications and workshop benefits Designed for external measurements of medium-sized components, the instrument suits inspection benches, assembly stations and maintenance trolleys. It is appropriate for tasks such as shaft diameter checks, flange verification and spacer thickness control. The included calibration certificate supports acceptance into a quality system and simplifies audit documentation. For additional technical data or application advice, Metav’s consultants can assist with integration into existing inspection routines and advise on suitable fixtures or handling methods. Contact Metav Werkzeuge today to arrange delivery of this Microtech Metrology micrometer with ISO 17025 calibration and ensure traceable measurement capability at your production line — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 110113001 GTIN: 4061905458903 Manufacturer: Microtech Metrology Facts Measuring range: 275–300 mm Resolution/reading: 0.01 mm Accuracy: ±0.005 mm Special features Ratchet stop for consistent measuring force Analogue (mechanical) micrometer Anvil diameter: Ø6.5 mm ISO 17025 calibration certificate included (Ilac MRA) FAQ What documentation is supplied with the micrometer? The Microtech Metrology micrometer (SKU 110113001) is delivered with an ISO 17025 calibration certificate that documents its traceability and calibration status. How precise is this measuring instrument in daily use? The device specifies an accuracy of ±0.005 mm, with a mechanical reading of 0.01 mm, which provides reliable precision for standard production control tasks. Is the instrument suitable for shop‑floor use without batteries? Yes. The analogue design of the micrometer avoids battery dependence and the ratchet stop ensures repeatable contact force for consistent measurements. Which components is this micrometer best suited to measure? The instrument is optimised for external diameters and thicknesses in the mid‑range size class — shafts, rings, spacers and similar components within the 275–300 mm span. Does the ratchet stop improve measurement consistency? Yes. The ratchet stop limits applied force and reduces operator‑related variation, increasing repeatability across multiple operators and measurement cycles. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
275-300mm Thread Micrometer Digital With Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Combine high accuracy, ISO 17025 calibration and wireless data transfer to streamline thread inspection in the workshop; benefit from reliable measurements and traceable documentation. Order the micrometer screw gauge directly via Metav Werkzeuge or ask our consultants if needed. Microtech digital micrometer screw gauge — Whitworth 55, touchscreen & Wireless/USB The micrometer screw gauge from Microtech Metrology is a digital measuring instrument designed for precision thread measurement and inspection in machine shops and quality departments. Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 High accuracy: 0.008 mm Non-rotating measuring spindle Faster inspection through measurable precision The measuring system combines a high accuracy of 0.008 mm with a fine display resolution of 0.0001 mm, enabling consistent results on threaded components. This level of precision reduces rework and shortens inspection cycles; fewer rejected parts lead to more stable production throughput. The non-rotating spindle ensures the thread form remains undisturbed during measurement, which preserves the integrity of delicate samples and improves repeatability compared with rotating designs. Ready for digital workflows and documentation Data transfer via Wireless and USB simplifies logging and traceability in modern quality systems. Measurements can be exported directly to inspection software or spreadsheets, eliminating manual transcription and associated errors. The colour 2.4" touchscreen provides clear visual feedback and quick access to measurement modes, making integration into Industry 4.0 setups straightforward while supporting audit-ready documentation. Built for reliable, workshop-friendly handling With a maximum measuring range placing it in the Standard category (up to 300 mm), this instrument balances reach and stiffness for everyday machine‑shop use. The construction and ergonomics favour one-handed operation while maintaining stability for larger parts within the range. Supplied anvils for Whitworth threads allow immediate use on standard Whitworth 55 samples, so the tool is practical on the shop floor as well as in the inspection room. Calibrated delivery and traceability you can trust The device is supplied calibrated to ISO 17025 and includes a calibration certificate, providing verifiable measurement traceability for internal quality control or external audits. This formal calibration standard supports procurement and quality assurance requirements, and the inclusion of a certificate removes ambiguity about measurement capability at delivery. Contact Metav Werkzeuge in Emmerich for supply and technical advice on integrating the Microtech digital micrometer via Wireless or USB — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 110723008 GTIN: 4061905456978 Manufacturer: Microtech Metrology Type: Whitworth 55 Included accessories: 10x anvils 60‑3.5 TPI (Whitworth 55) Facts Measurement range: 275–300 mm Accuracy: ±0.008 mm Display resolution: 0.0001 mm Display: Colour 2.4" touchscreen Data output: Wireless and USB Special features Digital micrometer screw gauge design Non-rotating measuring spindle for stable thread measurement Delivered calibrated to ISO 17025 with certificate Supplied with Whitworth 55 anvils for immediate use Colour touchscreen for intuitive operation FAQ What measurement range does this instrument cover? The micrometer screw gauge covers a range of 275–300 mm and is classified as a Standard‑range instrument suitable for general machine‑shop and quality‑control tasks. Is the device ready for use in audits and traceable documentation? Yes. The instrument is delivered calibrated to ISO 17025 and includes a calibration certificate, which supports traceability for audits and quality systems. How are measurement results transferred to a PC or database? Measurement data can be exported via Wireless connection or USB, allowing the Microtech micrometer to feed results directly into inspection software or spreadsheets for documentation. Does the spindle rotation affect thread measurements? No. The micrometer features a non‑rotating measuring spindle, preventing disturbance of the thread form and improving measurement repeatability for Whitworth threads. Which thread standards are supported out of the box? The delivery includes ten anvils for Whitworth 55 (60‑3.5 TPI), enabling immediate measurement of Whitworth thread samples with the Microtech device (SKU 110723008). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
275-300mm Thread Micrometer With Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
The combination of ISO 17025 traceable calibration, a ±0.008 mm accuracy class and both wireless and USB data output ensures reliable, documented measurements and straightforward data capture in production workflows. Order the micrometer directly via Metav Werkzeuge or consult the team for integration advice. Micrometer (Metrisch 60) with 2.4" colour touchscreen by Microtech Metrology A precision micrometer designed for metric thread measurement with a 2.4" colour touchscreen, wireless and USB data transfer, and traceable calibration for industrial quality control ISO 17025 calibrated with certificate included ±0.008 mm accuracy for tight tolerances Wireless and USB data output for digital logging Includes 6x anvils 0.4–7 mm for thread applications Precise results and documented traceability for quality assurance The instrument combines a high-resolution measurement system with formal calibration: delivered with an ISO 17025 calibration certificate, it provides documented traceability that meets audit requirements. With a specified accuracy of ±0.008 mm, the device is suitable for components where narrow tolerance bands determine part acceptance. The supplied calibration paperwork reduces administrative overhead during quality inspections and simplifies supplier qualification procedures. Smooth data capture and modern display for faster workflows A 2.4" colour touchscreen gives clear numeric readout and intuitive control, while wireless plus USB outputs enable immediate transfer of readings into inspection software or statistical process control systems. The ability to export measurements without manual transcription reduces errors and shortens measurement cycles. Built-in digital connectivity supports integration with shop-floor data collection, improving traceability and enabling faster decision-making in production environments. Robust mechanical features tailored for thread measurement Mechanically, the gauge features a non-rotating spindle, which stabilises contact with threaded profiles and avoids unwanted rotational displacement during measurement. The tool is supplied with 6 anvils (0.4–7 mm) to cover a range of metric thread sizes, enabling flexible use across batch sizes without frequent accessory swaps. The device’s metric design and sturdy construction make it appropriate for workshop and production-line use where repeatability and handling resilience matter. For traceable, workshop-ready measurement solutions from Microtech Metrology, contact Metav Werkzeuge for supply and calibration documentation — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 110713008 GTIN: 4061905457074 Brand: Microtech Metrology Type: Metrisch 60 Display: Colour 2.4" touchscreen Data output: Wireless + USB Included accessories: 6x anvils 0.4–7 mm Calibration: ISO 17025 certificate included Numbers / Core technical data Measuring range: 275–300 mm Accuracy: 0.008 mm Display size: 2.4 inches Special features / Versions Digital instrument Non-rotating spindle Wireless data transfer USB data transfer Metric thread measurement focus FAQ What calibration documentation is supplied with this micrometer? The micrometer from Microtech Metrology is supplied fully calibrated with an ISO 17025 calibration certificate, confirming traceability and suitability for audited quality systems. Can measurement data be exported to inspection software? Yes, the micrometer supports both wireless and USB data output, allowing direct export of readings from the Microtech Metrology micrometer (Metrisch 60, SKU 110713008) to PC-based inspection or SPC systems. Which thread sizes are covered by the included anvils? The delivery includes six anvils for thread measurement covering 0.4–7 mm, enabling use across common metric thread ranges with the Microtech Metrology micrometer. Is the spindle design beneficial for threaded parts? The non-rotating spindle stabilises contact with threaded profiles, improving repeatability when measuring external threads with this Microtech Metrology micrometer. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
275-300mm Three-Point Inside Micrometer for Blind Holes With Carbide Measuring Faces, Ratchet, Supplied in Case - Metav IndustryLine
Take advantage of the combination of high reproducibility, wear‑resistant carbide measuring faces and a practical ratchet stop for consistent bore checks; benefit from Metav’s workshop supply chain and order the instrument directly via Metav Werkzeuge or consult their specialists for specification support. Metav IndustryLine Three‑point Internal Micrometer M312.153.S – 275–300 mm, carbide measuring faces The Metav IndustryLine Three‑point Internal Micrometer M312.153.S is a mechanical precision instrument for measuring blind bores in production and inspection environments, engineered for stable contact and repeatable results. Three‑point measurement for internal bores Carbide measuring faces for long wear life Range 275–300 mm with 140 mm depth Ratchet stop for consistent measuring force Consistent bore measurement where it matters The three‑point contact geometry combined with a ratchet stop produces a reproducible contact condition that reduces operator variability during internal measurements. With a measuring range of 275–300 mm and a measuring depth of 140 mm, this instrument is suited to larger bores and recesses where standard gauges struggle. The device is an analog vernier tool with a fine reading increment of 0.005 mm and an accuracy specified as 0.009 mm, giving a reliable numerical basis for quality control in machining and assembly operations. Such repeatability shortens inspection loops and supports tighter process control on production lines. Built for durability and workshop practice Design choices focus on longevity and tactile feedback: the measuring faces are carbide, making them resistant to wear from repeated contact; the scale and vernier are matt‑chrome plated, which reduces reflections and protects against corrosion. The robust construction is reflected in the instrument mass (about 5.3 kg), providing stability when conducting measurements in the workshop. Delivery is stated without a setting ring, so calibration or verification should be planned as part of integration into existing quality routines. These attributes mean fewer service interventions and a lower total cost of ownership over time. Application and integration in production workflows Classified in the Standard measuring range category (up to 300 mm), this three‑point internal micrometer bridges typical shop‑floor needs in machine and toolmaking: it measures bore diameters in housings, fixtures and components used across mechanical engineering. Its analogue design requires no electronics, simplifying use at the bench or in environments where robust, low‑maintenance instruments are preferred. The unit’s specific suitability for blind‑hole measurement makes it a practical choice for quality inspectors and setup technicians who need a dependable mechanical solution for internal dimensions. Contact Metav Werkzeuge for tailored advice or to arrange procurement of the Metav IndustryLine three‑point internal micrometer; their specialists in Emmerich will support specification checks and delivery arrangements — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: M312.153.S GTIN: 4054469158754 ETIM: EC003590 eClass: 21170335 Facts Measuring range: 275–300 mm Measuring depth: 140 mm Accuracy: 0.009 mm Reading increment: 0.005 mm Weight: 5.3 kg Tariff number: 90173000 Materials and features Scale and vernier matt‑chrome plated Carbide measuring faces Ratchet stop Designed for blind‑hole measurement Supplied without setting ring Analog vernier instrument FAQ How does three‑point measurement improve internal bore readings? Three contact points self‑centre inside the bore and average out small eccentricities; the Metav IndustryLine three‑point internal micrometer M312.153.S therefore provides a stable reference and reduces reading scatter compared with single‑point probes. Can this micrometer be used for blind‑hole measurement? Yes. The instrument is specifically designed for blind holes and recesses, with a measuring depth of 140 mm and contact geometry optimised for such applications. What accuracy and resolution can be expected during inspections? The device offers a declared accuracy of 0.009 mm and a reading increment of 0.005 mm, which supports reliable dimensional control in workshop and inspection tasks. Is a setting ring included for calibration? No. Delivery is made without a setting ring; calibration or verification should be performed using a separate standard or reference gauge. How should the carbide faces be maintained? Keep the measuring faces clean and free of chips; avoid aggressive wiping that could embed particles. Regular visual checks and gentle cleaning will preserve the carbide faces and the plated scale finish. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
275-300mm Three-Point Internal Measuring Device With Carbide Measuring Faces, 140mm Depth, Ratchet, Supplied In Case - Metav IndustryLine
Take advantage of a robust combination of repeatable measuring force, wear‑resistant carbide contact faces and workshop‑grade accuracy to keep inspection routines efficient; order via Metav Werkzeuge or consult our specialists for application advice. Three‑point internal micrometer M312.153 — 275–300 mm, carbide measuring faces M312.153 is a precision analogue three‑point internal micrometer designed for reliable internal diameter checks in machining and inspection environments with a 275–300 mm range Large 275–300 mm measuring range Carbide measuring faces for wear resistance Ratchet stop ensures repeatable measuring pressure Supplied in transport case without setting ring Highly repeatable measurements for medium‑sized bores The three‑point design with self‑centring contact geometry converts small adjustments into a stable diameter reading, making this instrument ideal for repetitive checks on medium‑sized bores. The 275–300 mm range covers common components in assembly and maintenance work while the ratchet stop enforces a consistent measuring force, reducing operator‑induced scatter. With an analogue vernier that provides a resolution of 0.005 mm and a specified accuracy of ±0.009 mm, the tool balances sensitivity and robustness for standard workshop quality assurance. Durable contact faces and corrosion‑resistant scale for long service life Wear is a major contributor to drift in measuring tools. The measuring faces are manufactured from carbide, delivering high abrasion resistance and stable contact geometry over prolonged use. The matt chrome‑plated scale and vernier minimise glare for clear readings and help resist surface corrosion in workshop atmospheres. These construction choices reduce downtime for replacement and preserve measurement integrity across many inspection cycles. Practical handling and alignment to workshop workflows A measuring depth of 140 mm allows access to deeper bores without sacrificing stability. The analogue vernier format keeps the instrument simple to use and serviceable without batteries, while the ratchet stop prevents over‑tightening and helps achieve consistent contact. The tool is supplied in a transport case, which protects the micrometer during storage and transit; note that delivery is without a setting ring, so zero setting must be performed with in‑house references or supplied gauge blocks. Suitable classification and typical applications This instrument falls into the standard class for calipers and micrometers, covering the everyday needs of machine shops, toolrooms and maintenance departments that require a good compromise between reach and stiffness. Typical uses include verification of internal diameters on housings, sleeves and medium‑sized cast or turned parts, as well as spot checks during assembly operations where reproducibility is essential. For precise internal measurement backed by Metav IndustryLine quality, contact Metav Werkzeuge for tailored purchasing advice and prompt dispatch from Emmerich Technical data Article number: M312.153 GTIN: 4054469119595 Customs tariff number: 90173000 eCl@ss: 21170335 ETIM: EC003590 Core data Measuring range: 275–300 mm Measuring depth: 140 mm Resolution (vernier): 0.005 mm Accuracy: ±0.009 mm Design & special features Analogue vernier, matt chrome‑plated scale and vernier Carbide measuring faces (HM) Ratchet stop for consistent measuring force Supplied in transport case; delivery without setting ring Category: three‑point internal micrometer FAQ How does the three‑point principle improve internal measurements? The three‑point geometry of M312.153 centres itself inside the bore and reduces sensitivity to slight misalignment, so practical centring and stable diameter readings are achieved more quickly than with two‑point methods. Is the instrument suitable for production spot checks? Yes, the combination of a 275–300 mm range, ratchet stop and resolution of 0.005 mm makes M312.153 appropriate for routine production checks where repeatability and speed matter. What maintenance keeps the measuring faces accurate? Regular cleaning and light lubrication of the spindle threads, together with periodic inspection of the carbide measuring faces, will maintain the measuring geometry and prolong service life of the M312.153 micrometer. Can the micrometer be used for different materials such as cast iron or aluminium? The measuring faces are suitable for a wide range of materials; material‑specific handling (cleaning of chips, light oil film) is recommended when measuring abrasive or sticky surfaces to avoid contamination of the contact faces. Is a setting ring included for calibration at delivery? Delivery of M312.153 is without a setting ring; calibration or zero setting should be performed using in‑house reference standards or gauge blocks as required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
275-300mm Three-Point Internal Micrometer Digital, 0.001mm Resolution, Hardened Measuring Faces, Supplied in Case - Metav IndustryLine
Take advantage of a robust combination of high measuring depth, clear digital readout and three‑point contact for reproducible internal measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Three‑point internal micrometer M312.263 — digital, 275–300 mm range Three‑point internal micrometer M312.263 is a digital instrument designed for accurate internal diameter measurement of medium‑sized bores in machine and toolmaking applications. Digital display with mm/inch and ABS Measuring range 275–300 mm Measuring depth 140 mm Delivered in protective case Precision where larger internal diameters must be checked reliably The M312.263 employs a three‑point contact system that centres automatically in bores, reducing alignment error and delivering consistent contact geometry for repeatable results. With a stated accuracy of 0.009 mm and a display resolution of 0.001 mm, the device is engineered for tasks where reproducibility across multiple components is essential. The instrument’s measuring range 275–300 mm places it in the standard workshop bracket for internal gauges, offering the reach needed for housings and medium assemblies while retaining manageable stiffness and handling. Clear digital readout and integrated data transfer for efficient measurement logging Equipped with a digital display that includes ON/0, mm/inch, ABS, PRESET and HOLD functions, the micrometer simplifies measurement routines and reduces reading errors. The provided data output (RB 4) enables direct transfer of measured values into SPC or QA systems, accelerating documentation and traceability. The combination of fast digital feedback and a reliable interface supports lean quality workflows and helps maintain throughput in batch inspection processes. Robust workshop design and straightforward transport Constructed for everyday use in production environments, the instrument features hardened measuring faces for wear resistance and a compact form that balances rigidity with a transportable footprint. The tool weighs approximately 5 kg and is supplied in a protective case suitable for safe delivery and storage. Note that the scope of delivery excludes a setting ring; the absence of an adjustment ring should be considered when planning calibration fixtures or reference standards. Ideal fit for standard machine‑shop inspection tasks Classified in the standard measuring range category, this micrometer is aimed at machine shops and quality departments that require mid‑range internal measurement capability without resorting to heavier long‑balken solutions. The measuring depth 140 mm supports access into recessed bores and stepped geometries, enabling internal, step and shoulder checks with the same instrument. Its feature set makes it a practical choice where repeatability, digital readout and data capture are priorities. Contact Metav Werkzeuge today to discuss how the M312.263 suits your inspection needs and to arrange delivery from our Emmerich warehouse. Technical data Article number: M312.263 GTIN: 4054469120058 ETIM: EC003590 ECLASS: 21170335 Data output: RB 4 Core specifications Measuring range: 275–300 mm Minimum range: 275 mm Maximum range: 300 mm Measuring depth: 140 mm Display resolution: 0.001 mm Accuracy: 0.009 Weight: 5 kg Features Digital display with ON/0, mm/inch, ABS, PRESET, HOLD Three‑point internal contact system Hardened measuring faces Supplied in protective case Delivery without setting ring FAQ What bore sizes can be measured with this micrometer? The three‑point internal micrometer M312.263 covers bores within the 275–300 mm range and is intended for medium‑sized internal diameter inspection. How precise are the measurements from this instrument? The instrument has an indicated accuracy of 0.009 mm with a digital resolution of 0.001 mm, suitable for repeatable workshop measurements where fine tolerance control is required. Does the device support data transfer to quality systems? Yes, the micrometer offers a data output described as RB 4 for integration into measurement logging or SPC workflows. Is a setting ring included for calibration? The scope of delivery for the M312.263 does not include a setting ring; calibration and reference standards must be arranged separately. Are the measuring faces durable for regular workshop use? The tool is supplied with hardened measuring faces to resist wear in routine inspection tasks, supporting long‑term stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
275-300mm Three-Point Internal Micrometer Self-Centring, Interchangeable Anvils, Calibrated in Plastic Case - Metav IndustryLine
Take advantage of a self‑centring three‑point measuring head, robust carbide measuring faces and a 275–300 mm range for consistent blind‑hole inspection — order the instrument via Metav Werkzeuge or contact our specialists for application advice. Three‑point internal micrometer MS908.670 — self‑centring, 275–300 mm range (Metav IndustryLine) The Three‑point internal micrometer is a precision analogue instrument for reliable measurement of blind bores in machine construction and toolmaking. Self‑centring three‑point head Measuring range 275–300 mm Interchangeable measuring insert Resolution 0.005 mm, accuracy ±0.007 mm Consistent centring for blind‑hole work that saves time The instrument’s self‑centring three‑point head guarantees that the measuring contacts align automatically with the bore axis, reducing setup time and minimising operator error. For applications in production or quality control where repeatability matters, this design converts manual handling into a reproducible process. The unit’s standard range (275–300 mm) fits typical medium‑sized bores encountered in fixtures, housings and component assemblies, providing an efficient balance between reach and ease of handling. Clear analogue reading with industry‑grade precision Equipped with an analogue graduation that offers a resolution of 0.005 mm and a stated accuracy of ±0.007 mm, the device provides measurable certainty without complex electronics. These specifications correspond with workshop inspection needs where a tactile feel and immediate visual feedback are valued. In practice, the resolution allows fine incremental control during measurement and the accuracy ensures confidence when recording results for process control or acceptance tasks. Durable measuring faces and modular inserts for long service life The measuring contacts are furnished with carbide measuring faces, chosen for wear resistance and stable contact geometry under repeated use. The interchangeable measuring insert system permits adaptation to varying bore conditions and simplifies maintenance: inserts can be replaced without extensive downtime, extending the instrument’s operational life and keeping measurement uncertainty low. This modularity supports varied production demands while lowering total cost of ownership. Workshop‑ready design tailored to machine‑shop workflows Built as an analogue micrometer in the Metav IndustryLine, the instrument combines straightforward handling with workshop robustness. A compact overall form (length approx. 145 mm) and a three‑point contact principle help to maintain stiffness during measurement, which is crucial when inspecting bores that require high concentricity. The tool is well suited for standard quality control loops and for technicians who prefer a mechanical measuring instrument with clear physical feedback. For expert specification and rapid procurement of the Metav IndustryLine three‑point internal micrometer MS908.670, contact Metav Werkzeuge for tailored advice and to arrange purchase through our European distribution. Technical data Article number: MS908.670 Name: Three‑point internal micrometer Brand: Metav IndustryLine Measuring range: 275–300 mm Length: 145 mm Reading: 0.005 mm Accuracy: ±0.007 mm Self‑centring three‑point head Interchangeable measuring insert Carbide measuring faces Analogue instrument Suitable for blind bores FAQ What bores is this micrometer intended for? The three‑point internal micrometer MS908.670 is designed for blind‑hole measurement and is optimised for bores within the 275–300 mm range. How precise is the measurement result? The instrument provides a resolution of 0.005 mm and an accuracy of ±0.007 mm, allowing dependable readings for workshop inspection and process control. Can the measuring contacts be replaced? Yes. The device features an interchangeable measuring insert system so contacts can be swapped to suit different bore conditions or renewed after wear. Are the measuring faces durable for high batch usage? The micrometer is fitted with carbide measuring faces, offering wear resistance and long service life under repetitive measurement cycles. Who manufactures the instrument and what is the model reference? The product is supplied under Metav IndustryLine as the three‑point internal micrometer MS908.670 and is distributed by Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
275mm Setting Gauge For Micrometers With Heat Shield, Accuracy ±0.0035 - Metav IndustryLine
Take advantage of precise setting and thermal stability: the combination of a 275 mm nominal length, an accuracy of ±0.0035 mm, and integrated thermal protection ensures reliable micrometre adjustments and reproducible calibration cycles; order the setting gauge directly via Metav Werkzeuge or ask our consultants if needed. M304.319 Setting Gauge for Micrometres — 275 mm, Thermal Protection (Metav IndustryLine) The M304.319 is a precision setting gauge for external micrometres, designed for workshop and laboratory use where consistent reference lengths and stable readings are required. Nominal length 275 mm Accuracy ±0.0035 mm Equipped with thermal protection Flat measuring faces, D 8 mm Improve calibration reliability with traceable reference performance The setting gauge serves as a stable reference for micrometre adjustments and routine verification tasks. With a nominal length of 275 mm and an accuracy of ±0.0035 mm, the gauge reduces uncertainty in the zeroing and checking of external micrometres, helping to maintain consistent measurement chains. The precision specification supports quality processes in machine shops and metrology benches, translating technical performance into measurable uptime and fewer instrument-related errors. Maintain stable readings under varying shop conditions Thermal effects cause the largest short-term drift in small-length standards; the integrated thermal protection minimises temperature transfer during handling, so readings remain repeatable between successive checks. The gauge is supplied with flat measuring faces and a diameter of 8 mm that suit standard micrometre anvils, while the modest weight (0.4 kg) and compact form factor permit quick positioning without sacrificing rigidity. These design choices reduce operator influence and improve reproducibility during calibration routines. Seamless integration into workshop workflows Classified within the standard range for length references (suitable for maximum spans up to 300 mm), the gauge bridges bench and workshop needs: long enough for broad applicability yet short enough for single-person handling. Use as an accessory for setting external micrometre screws or as a length master for periodic checks, thereby shortening inspection cycles and supporting stable production tolerances. The robust construction and targeted features make it an effective tool for quality control and process assurance in industrial metrology. Contact Metav Werkzeuge for expert advice on the M304.319 setting gauge or to request a personalised quotation — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M304.319 GTIN: 4054469116709 Manufacturer: Metav IndustryLine Facts Nominal length: 275 mm Accuracy: ±0.0035 mm Weight: 0.4 kg Diameter: 8 mm Special features With thermal protection Flat measuring faces Intended use: setting external micrometre screws Tariff number: 90173000 ECLASS: 21170102 FAQ What is the primary use of this setting gauge? The setting gauge M304.319 is intended as a reference for the adjustment and verification of external micrometres and for routine calibration tasks in workshops and laboratories. What accuracy can be expected from the gauge? The M304.319 provides an accuracy of ±0.0035 mm, delivering the fine resolution required for demanding micrometre checks. Which length range does the gauge cover? The nominal length is 275 mm, placing the gauge in the standard length category suitable for common workshop and machine‑shop applications. Does the gauge include features to reduce thermal influence? Yes, the gauge is supplied with integrated thermal protection to improve measurement stability during handling and short inspection cycles. Are the measuring faces compatible with standard micrometres? The gauge has flat measuring faces with an 8 mm diameter, designed to match typical external micrometre anvils and ensure repeatable contact geometry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
275–300mm Three-Point Internal Micrometer Self-Centring, 0.005mm Vernier, Wooden Case - Metav IndustryLine
The combination of a self‑centring three‑point system, a 275–300 mm measuring range and proven mechanical reliability delivers repeatable internal measurements for medium-sized components; order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Three-point internal micrometer M836.726 — self‑centring, 275–300 mm (Metav IndustryLine) The Three‑point internal micrometer M836.726 is a mechanical internal measuring instrument intended for precise diameter checks of medium‑sized bores and assemblies in workshop and inspection environments. Self-centring three-point measuring principle Measurement range 275–300 mm for medium workpieces Hardened measuring faces for wear resistance Mechanical reading with 0.005 mm graduation Precise, repeatable internal measurement for production use The instrument relies on a self‑centring three‑point system that minimises alignment errors and reduces operator influence, producing consistent results across repeated checks. With a stated accuracy of 0.012 mm and a mechanical reading of 0.005 mm, the device offers clear, comparable figures for quality control routines and in‑process checks. The design concentrates on measurable repeatability, making the tool suitable for serial inspection tasks where consistent pass/fail evaluation is required. Built for workshop conditions with durable contact faces Hardened contact surfaces extend service life and maintain measuring integrity under frequent use. The hardened measuring faces resist wear from repeated contact, which preserves the gauge geometry and reduces the need for frequent recalibration. The robust frame and mechanical actuation are compatible with typical machine shop environments, where a balance of stiffness and handling convenience is essential for medium‑sized internal diameters in components such as housings, sleeves and bearing seats. Straightforward handling and low upkeep As a mechanical instrument, this internal micrometer avoids electronic dependencies and therefore offers simple operation and low maintenance. Reading is performed via a finely graduated scale with 0.005 mm increments, making immediate assessments possible without auxiliary devices. The absence of batteries and electronics reduces downtime risk and simplifies storage and transport routines in busy workshop settings. Practical uses and quality context Intended for inspection and assembly checkpoints, this internal micrometer fits applications that require controlled measurement of medium bores and mating parts. The 275–300 mm range addresses a common segment of components encountered in general engineering and tooling workshops. Supplied as a mechanical measuring instrument, it supports standard quality workflows and integrates easily with existing inspection protocols. For procurement or to discuss suitability for specific production tasks, contact Metav Werkzeuge — Metav IndustryLine instruments are supplied from Emmerich and technical advisors can explain delivery and application details by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: M836.726 GTIN: 4061905041181 ECLASS: 21170335 ETIM: EC003590 Facts Measurement range: 275–300 mm Reading: 0.005 mm Accuracy: 0.012 mm Analog instrument: yes Special features Self-centring three-point measuring system Hardened measuring faces Mechanical micrometer frame Category: Internal micrometer (three-point) FAQ What is the measuring range of this internal micrometer? The measuring range is 275–300 mm for the three‑point internal micrometer M836.726, suited to medium‑sized bores and assemblies. What resolution and accuracy can be expected? The instrument provides a mechanical reading resolution of 0.005 mm and an accuracy of 0.012 mm as specified for the M836.726 internal micrometer. Are the contact faces wear‑resistant? Yes, the M836.726 features hardened measuring faces designed to maintain contact geometry and resist wear during frequent use. Is the instrument suitable for routine workshop inspection? The mechanical design and the 275–300 mm range make this micrometer appropriate for routine inspection and in‑process checks of medium internal diameters. Does the product include electronic data output? No data output interface is specified; the M836.726 is a purely mechanical, analog internal micrometer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2800-3000mm Bench Micrometer With Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Benefit from the combination of an extra‑long measuring range, integrated touchscreen electronics and a full ISO 17025 calibration certificate to ensure reproducible results on large components; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. DataMet Wide‑Range Micrometer — Outside micrometer with 2.8–3.0 m range and colour touchscreen A DataMet Wide‑Range Micrometer engineered for extra‑long external measurements in heavy engineering and fixture manufacturing; the device pairs a CNC‑machined aluminium housing with an integrated microcomputer for wireless data capture and industrial interfaces. Extra‑long range 2.8–3.0 m ISO 17025 calibration certificate included Wireless and USB data output CNC machined aluminium housing Reproducible measurement on large components Large assemblies require instruments that keep stiffness and repeatability over metres rather than millimetres. This micrometer provides an extra‑long range (2,000–5,000 mm class) so measurements up to 2.8–3.0 m can be taken with consistent contact geometry thanks to the Ø50 mm measuring faces. The robust, CNC‑machined aluminium frame reduces thermal distortion and maintains alignment across the span; the instrument’s mass (approx. 33 kg) indicates a device designed for stationary or bench installation rather than hand‑held use, improving stability for repeatable inspection cycles. Integrated electronics for fast, traceable workflows Modern quality processes demand digital traceability. The instrument’s MICS microcomputer and 1.5" colour touchscreen present measurement values and graphical modes on the device, while the memory manager (2000 values) stores sessions for batch evaluation. Data transfer works via Wireless and USB HID, with an optional MODBUS RTU interface for PLC or SCADA integration. These features eliminate manual transcription, speed up reporting and support Industry 4.0 data flows, allowing rapid statistical checks and trend analysis in production. Calibrated accuracy that supports quality assurance A clear traceable calibration reduces uncertainty in serial inspection. The micrometer is supplied with an ISO 17025 calibration certificate (ILAC MRA), confirming the instrument has been calibrated to laboratory standard and is suitable for use in accredited measurement routines. Resolution is 0.0001 mm and stated accuracy is ±0.045 mm, parameters that should be considered when defining measurement tolerances for large parts. The calibrated delivery enables immediate use in quality control and helps to meet audit requirements without additional preparatory steps. Designed for industrial handling and integration Durability and interface options make the instrument suitable for heavy‑duty workshops and measurement rooms. The solid housing and enlarged measuring faces are designed to handle coarse surfaces and large contact areas while maintaining repeatability. Built‑in functions such as go/no‑go checks, statistical summaries and linear/temperature compensation simplify routine tasks. The device is intended for fixed use; due to its dimensions and mass, plan for suitable support or two‑person handling during installation to avoid strain and ensure accurate alignment. Contact Metav Werkzeuge for a specification review, application consultation or to request a tailored quotation for Microtech Metrology instruments and system integration support — assistance is available from Emmerich with direct delivery across Europe. Technical data Article number: 110183108 GTIN: 4061905039959 Manufacturer: Microtech Metrology Category: Measuring instruments / Micrometers eClass: 21170328 ETIM: EC003590 Numbers / Core technical data Measuring range: 2800–3000 mm Resolution (reading): 0.0001 mm Accuracy: ±0.045 mm Weight: 33 kg Measuring faces: Ø50 mm Memory capacity: 2000 values Special features / Versions MICS microcomputer with graphical modes Colour 1.5" touchscreen display Wireless and USB HID data transfer Optional MODBUS RTU (RS‑485) industrial output CNC machined aluminium housing Go/No‑Go, Max/Min, formula and temperature compensation Calibration certificate ISO 17025 (Ilac MRA) included FAQ Is the instrument supplied with a calibration certificate? Yes. The micrometer is delivered with an ISO 17025 calibration certificate, confirming laboratory traceability and immediate suitability for accredited quality procedures. Which data outputs are available for automation? Measurement data can be exported via Wireless and USB HID; an optional MODBUS RTU (RS‑485) interface is available for direct connection to industrial control systems. What is the practical application for a 2.8–3.0 m micrometer? The instrument is intended for large external dimensions such as big housings, flanges and fixtures where an extra‑long measuring range and large contact faces provide repeatable contact and clear measurement definition. How should the instrument be installed in the workshop? Due to its mass (approx. 33 kg) and span, the device is designed for stable bench or fixed mounting; allow two‑person handling for safe installation and alignment. What level of measurement uncertainty can be expected? Use the declared resolution 0.0001 mm and accuracy ±0.045 mm as the basis for tolerance planning; the included ISO 17025 certificate details the calibration conditions and uncertainty values. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2800-3000mm Digital Micrometer Frame With IP65 Protection, ISO 17025 Calibration Certificate - Microtech Metrology
Take advantage of the combination of an extra‑long measuring range, a robust IP65 digital head and full ISO 17025 calibration, ensuring reproducible, traceable measurements for large components; order directly via Metav Werkzeuge or consult the specialists for application support. Outside micrometer — Digital IP65 head by Microtech Metrology, extra‑long range Outside micrometer for precise external measurements of large workpieces in heavy machining, inspection and toolmaking environments. Extra‑long 2,800–3,000 mm measuring range IP65 digital micrometer head for workshop use ISO 17025 calibration certificate included Large Ø50 mm measuring faces and ratchet control Engineered for extra‑long measurements with repeatability The instrument is built as an extra‑long range measuring device, covering 2,800–3,000 mm, which places it in the class for very large components where single‑piece measurement is required. The extended span reduces the need for piecewise measurement and alignment operations, helping to shorten inspection cycles. Large contact surfaces distribute pressure over the part, so the Ø50 mm measuring faces minimise local deformation and contribute to reproducible results during serial inspections. Rugged digital head designed for harsh workshop conditions Equipped with a digital micrometer head rated IP65, the measuring system resists coolant, dust and general workshop contamination while keeping the display and electronics protected. The sealed head and industrial display enable straightforward readout and reduce transcription errors. A fine friction ratchet provides a consistent measuring force, improving repeatability, and the inclusion of setting rods simplifies calibration and setup on-site, making the device practical for production environments. Factory traceability and accredited calibration for confident decision‑making This micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA), supplying documented traceability to national standards. The accredited certificate supports internal quality records and audit trails, helping to meet supplier qualification and inspection requirements. Formal calibration together with the specified accuracy ±0.06 mm gives a verifiable baseline for tolerance checks on large assemblies and reduces uncertainty in acceptance testing. Practical handling and measurement performance for workshop productivity Although substantial in size, the instrument is configured to be manageable in workshop workflows: robust construction balances stiffness and handling, and the digital readout (resolution 0.001 mm) speeds measurement tasks and reduces operator interpretation. The combination of a sealed head, ratchet control and generous measuring faces reduces rework caused by measurement variability and supports a consistent production flow, particularly in heavy machining, presswork and large‑part assembly contexts. Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology outside micrometer into existing inspection processes; specialists are available in Emmerich for delivery and documentation details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 110173101 GTIN: 4061905039478 Manufacturer: Microtech Metrology IP protection: IP65 Digital: yes Calibration: ISO 17025 (Ilac MRA) certificate included Measurements Measuring range: 2,800–3,000 mm Measuring faces: Ø50 mm Resolution (display): 0.001 mm Accuracy: ±0.06 mm Weight: 33 kg Design & special features Digital micrometer head, sealed to IP65 Friction ratchet for reproducible measuring force Setting rods included for adjustment ISO 17025 calibration certificate supplied Robust construction for large‑part inspection FAQ What types of components is this micrometer suited for? The outside micrometer from Microtech Metrology is intended for large external dimensions such as heavy housings, large shafts and pressings where a single, continuous measurement across 2,800–3,000 mm improves traceability and reduces alignment effort. How accurate and precise is the measurement result? Typical accuracy is specified as ±0.06 mm with a digital readout resolution of 0.001 mm; the built‑in ratchet and large measuring faces support precise, repeatable contact conditions for consistent results. Is the instrument ready for use upon delivery? Yes. The micrometer is supplied with setting rods and an ISO 17025 calibration certificate, providing documented traceability and immediate suitability for quality control tasks. Can the micrometer be used in coolant or dusty environments? The digital head is rated IP65, so the display and electronics are protected against dust and low‑pressure water jets, making the tool suitable for typical workshop conditions. Which SKU identifies this product for ordering and documentation? The micrometer is stocked as SKU 110173101 and can be referenced in purchase orders and calibration records. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2mm Round Offset Micrometer Anvils, Pair - Metav IndustryLine
Round, stepped Ø 2 mm contact points and matched delivery ensure reproducible contact geometry and straightforward replacement for inspection routines; the set is supplied pairwise for direct comparative checks. Benefit from reliable interchangeability and consistent readings—order the replacement anvils directly via Metav Werkzeuge or consult their specialists for application support. Anvil Pair for Uni Micrometer — Round Stepped Ø 2 mm (Metav IndustryLine) The Anvil Pair for Uni Micrometer, Round Stepped Ø 2 mm supplies precision contact points designed as a direct accessory for workshop and laboratory micrometers, optimising measurements on small-diameter parts. Round stepped tips Ø 2 mm Supplied as a matched pair Precision contact geometry Suitable for workshop micrometers Consistent contact geometry for repeatable readings The round, stepped Ø 2 mm contact design concentrates the contact area to minimise measurement ambiguity on small features. By reducing the effective contact radius, the contact tips lower the influence of surface irregularities and edge effects, delivering repeatable results across successive checks. This geometry is particularly useful where a stable single-point contact improves comparability between parts or across inspection cycles, supporting faster decision-making in quality control. Matched delivery that simplifies comparative measurement Supplied as a matched pair, the set eliminates the variability introduced when replacing single, unmatched tips. Paired delivery preserves symmetry between the spindle and anvil contact interfaces and therefore reduces systematic deviation when conducting comparative or batch measurements. The result is a clear efficiency gain in measurement routines: fewer rechecks, more reliable pass/fail outcomes and a smoother inspection workflow. Robust fit and easy replacement for workshop use Designed as replacement anvils for standard uni micrometers, the components provide simple mechanical interchangeability with common spindle faces and retainers. The compact anvil pair format enables rapid swapping during maintenance or tool-change procedures, limiting downtime on the production floor. Stiffness in the contact region maintains alignment under typical measuring pressures, which helps safeguard the precision of the measuring chain without requiring specialised tools. Improves throughput in inspection and small-part measurement Integrating these replacement tips into an inspection set-up streamlines small-diameter gauging tasks and reduces handling complexity. The compact contact geometry and matched tolerances support consistent readings on delicate parts such as pins, shafts and small bores, helping to accelerate inline checks and off-machine verification. By standardising on fitted, paired contact points, laboratories and workshops gain operational predictability and a clearer traceability of measurement conditions. For compatibility checks and to order the Metav IndustryLine anvil pair M309.088.7, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and dispatch options. Technical data SKU: M309.088.7 GTIN: 4054469118000 ECLASS: 21170324 Weight: 0.1 kg Tariff number: 90173000 Numbers Tip diameter: Ø 2 mm Image index: 5 Mass (kg): 0.1 Special features Supplied as a matched pair Label: Einsatzpaar für Uni-Mikrometer, round and stepped Ø 2 mm Category: Accessories for measuring instruments Manufacturer: Metav IndustryLine FAQ What is the contact tip diameter of these anvils? The contact tips have a diameter of Ø 2 mm, designed for precise single-point contact on small features. Are these anvils compatible with standard uni micrometers? Yes, the anvil pair is intended as replacement anvils for uni micrometers and fits common spindle face configurations. How are the anvils supplied? The set is delivered as a matched pair, enabling direct comparative measurements without additional matching. What advantages does the round, stepped geometry provide? The round stepped shape concentrates contact to a small area, improving repeatability and reducing the influence of edge effects on small components. What identifiers are associated with this product? The set is listed as SKU M309.088.7 with GTIN 4054469118000 and is offered under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3-4mm Three-Point Internal Micrometer Colour Touchscreen Wireless/USB ISO 17025 Calibrated - Microtech Metrology
Precision for the smallest bores: benefit from the combination of 0.003 mm accuracy, a three‑point measuring system and a colour touchscreen with wireless/USB output for fast, reliable inspection. Order the three‑point internal micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Three‑point internal micrometer (digital) by Microtech Metrology — 3–4 mm range, 0.003 mm accuracy The three‑point internal micrometer is a compact digital instrument designed for precise internal diameter measurement in fine mechanical and watchmaking applications. 1.5" colour touchscreen readout Wireless and USB data transfer ISO 17025 calibration with certificate 3–4 mm range for micro bores Compact precision for micro components The instrument is engineered for extremely small bores and fits the micro measurement class thanks to its 3–4 mm range, making it especially suitable for watchmaking, medical components and precision micro‑mechanics. The three‑point measuring system ensures concentric contact and stable centring inside the bore, reducing alignment errors compared with two‑point probes. With an accuracy of 0.003 mm, this device provides repeatable results where every micrometre matters, supporting tight tolerance checks without complex fixtures. Streamlined digital measurement and data transfer Readings are presented on a 1.5" colour touchscreen for clear immediate evaluation; tactile controls speed up routine checks while the visual display reduces misreading. The combined wireless and USB output allows seamless data capture into inspection software or SPC systems, cutting manual transcription and accelerating documentation. A measuring depth of 22.5 mm enables access into recessed bores while maintaining a compact overall size, so measurement routines are faster and traceable. Calibrated traceability and robust handling Delivered fully calibrated with an ISO 17025 calibration certificate, the micrometer supports quality management systems and audit trails out of the box. The supply includes an adjustment ring for easy zeroing and on‑site verification before inspection runs. Built for everyday workshop use, the instrument balances delicate measuring capability with a user‑oriented design that minimises operator influence and helps maintain consistent results over repeated cycles. For application advice or to request the Microtech Metrology three‑point internal micrometer with ISO 17025 certificate, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 133700410 GTIN: 4061905074158 Manufacturer: Microtech Metrology Facts Measuring range: 3.0–4.0 mm Accuracy: 0.003 mm Display: 1.5" colour touchscreen Measuring depth: 22.5 mm Data output: Wireless + USB Special features Three‑point measuring system Adjustment ring included Delivered with ISO 17025 calibration certificate Digital instrument for micro bores FAQ What measurement range does the micrometer cover? The three‑point internal micrometer covers a measuring range of 3.0–4.0 mm, suitable for very small internal diameters. How accurate are the readings from this instrument? Readings are accurate to 0.003 mm, giving the precision required for fine mechanical and watchmaking tasks. Is the micrometer supplied calibrated? Yes — the micrometer is supplied fully calibrated with an ISO 17025 calibration certificate, documented for traceability. How can measurement data be exported? Measurement data can be transferred via wireless connection or USB to inspection software or SPC systems for documentation. What depth of bore can be measured? The instrument permits a measuring depth of 22.5 mm, enabling measurement of recessed internal diameters. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3-6mm Three-Point Internal Micrometer Colour 1.5" Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
The combination of three-point internal measurement, wireless data transfer and an included ISO 17025 calibration certificate ensures reproducible results for small-bore inspection; the three-piece set with three adjustment rings and 22.5 mm measuring depth is ready for immediate quality-control use. Order the three-point internal micrometer set directly via Metav Werkzeuge or consult the team for application support. Three-point internal micrometer set — Microtech Metrology, 3–6 mm, 1.5-inch colour touchscreen The three-point internal micrometer set is a compact, digitally driven instrument for precise internal diameter measurement in miniature bores, combining a micro measuring range with wireless and USB data output. ISO 17025 calibrated with certificate Wireless and USB data output 1.5-inch colour touchscreen display Three-piece set for small bores Precision tailored to miniature bores The instrument uses a three-point measuring principle to centre reliably inside small diameters, delivering consistent contact around the circumference rather than single-point readings. With a measuring range of 3.0–6.0 mm and a measuring depth of 22.5 mm, the design suits fine-mechanical work where repeatability and low probe tilt are critical. Classified for the micro measurement category, this gauge is particularly useful for watchmaking, micro components and precision insert inspection because it minimises measuring uncertainty on very small features. Digital capture that speeds inspection Integrated electronics provide both wireless and USB data output for direct transfer into inspection software or spreadsheets, reducing transcription errors and speeding up documentation. The 1.5-inch colour touchscreen gives immediate readout and simple on-device controls, while the microcomputer functions handle unit switching and zeroing without external tools. Together these features support efficient in-process checks and quick recording of measurement series for traceability and process control. Delivered calibrated for quality assurance This three-piece set is supplied fully calibrated to ISO 17025 standards and includes the official calibration certificate, enabling immediate use in accredited quality workflows. The delivery contains three measuring heads and three adjustment rings, allowing rapid adaptation to varying bore sizes within the 3–6 mm range. The calibrated status and certificate simplify audit preparation and help ensure measurement results are accepted in formal inspection routines. Robust workflow benefits on the shop floor Designed for frequent handling, the set combines a compact mechanical concept with digital convenience to reduce cycle time during batch inspections. The combination of centred three-point contact and digital output reduces operator influence and documentation overhead, making the gauge a practical addition to production lines and testing benches. Backed by Metav’s European distribution and quality filter in Emmerich, the instrument arrives with procurement transparency and reliable logistics for industrial users. For traceable, micro‑range internal measurements and advice on integrating Microtech Metrology three‑point internal micrometer sets into existing workflows, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange delivery or technical consultation Technical data SKU: 133370306 GTIN: 4061905074356 Brand: Microtech Metrology Digital display: Colour 1.5-inch touchscreen Data output: Wireless, USB Calibration: ISO 17025 certificate included Facts Measuring range: 3.0–6.0 mm Measuring depth: 22.5 mm Pieces per set: 3 Adjustment rings: 3 Special features Three-point internal measuring design Digital instrument with microcomputer Wireless and USB connectivity Delivered calibrated to ISO 17025 FAQ Is the instrument delivered calibrated and suitable for audit trails? Yes. The three-point internal micrometer set is delivered fully calibrated to ISO 17025 and includes the calibration certificate for audit-ready traceability. What is the measuring range and which applications are typical? The gauge covers 3.0–6.0 mm and is intended for micro-range internal measurements such as watch components, small bearings and precision insert bores. How are measurements exported to inspection systems? Data can be exported wirelessly or via USB from the instrument’s microcomputer; readings are also visible on the 1.5-inch colour touchscreen for immediate verification. How many parts are included in the set and what accessories are supplied? The delivery comprises a three-piece set with three adjustment rings and the calibration certificate; the configuration permits quick adaptation across the 3–6 mm range. Is the device suitable for routine production quality control? Yes. The combination of three-point centring, digital output and ISO 17025 calibration makes it well suited for regular QC checks and documented inspection routines. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3.5-4mm Three-Point Internal Micrometer Self-Centring, 0.005mm Accuracy, Supplied in Case - Metav IndustryLine
Take advantage of the combination of high measurement fidelity, compact handling and a self‑centring measuring head for reproducible small‑bore inspections; order this precision instrument directly via Metav Werkzeuge or consult the advisers for application support. Three‑point internal micrometer M836.700 — self‑centring, 0.005 mm accuracy (Metav IndustryLine) A Three‑point internal micrometer M836.700 designed for precise internal diameter checks in fine mechanical and watchmaking applications within the 3.5–4 mm micro range Self‑centring three‑point measuring head 0.005 mm accuracy for fine inspection Analogue dial with 0.001 mm reading resolution Suited to internal diameters 3.5–4 mm Precision tailored to the micro range This three‑point instrument addresses the demands of the micro range: the compact measuring span of 3.5–4 mm is ideal where short anvils and minimal bending improve repeatability. With a stated accuracy of 0.005 mm and a dial reading step of 0.001 mm, the design focuses on verifiable results rather than approximation. The compact format and solid thimble control make the micrometric measurement chain short and less susceptible to operator‑induced deviation, which benefits tasks such as bore verification in small housings and watch components. Geometry that improves centring and reproducibility The self‑centring, three‑point measuring head aligns the instrument automatically with the bore, reducing the need for manual repositioning and lowering operator influence on the result. An analogue mechanism provides tactile feedback during closure, helping to attain consistent contact pressure and a stable reading. The combination of the three‑point contact and mechanical dial gives a predictable measuring behaviour that supports rapid inspection cycles where repeatable internal readings are required. Practical handling and measurable advantages Integral measuring faces and a compact frame aid in controlled insertion and removal from small bores without disturbing the part. The mechanical design emphasises ease of handling during repetitive checks, enabling reliable comparative measurements and pass/fail decisions on the shop floor. The instrument’s attributes support workflows where a quick mechanical readout and robust mechanical feel are preferred over electronic systems, while still delivering fine resolution for quality assessment. Applications, users and trust in delivery The instrument suits precision workshops engaged in watchmaking, micro‑assembly and small component inspection, where dimensional control of tiny bores is critical. As part of the Metav IndustryLine, the device benefits from a supplier network that positions quality and accessibility side by side; Metav’s practical distribution and product range aim to make precision reachable for specialist and industrial buyers alike. The three‑point internal micrometer is therefore a pragmatic choice for technicians seeking a compact, reliable gauging tool that integrates into established inspection routines. Contact Metav Werkzeuge for tailored advice and to secure the M836.700 for precision micro‑measurements. Technical data Article number: M836.700 GTIN: 4061905039324 Brand: Metav IndustryLine ECLASS: 21170335 ETIM: EC003590 Facts Measurement range: 3.5–4 mm Reading step: 0.001 mm Stated accuracy: 0.005 mm Analogue instrument Special features Self‑centring three‑point measuring head Integral measuring faces present Compact micro‑range design suitable for fine mechanical work FAQ What internal diameters can this instrument measure? The Three‑point internal micrometer M836.700 measures internal diameters in the 3.5–4 mm range. How precise are the readings from the device? The M836.700 delivers a stated accuracy of 0.005 mm with a dial reading step of 0.001 mm for fine inspection tasks. Is the three‑point head suitable for small, delicate bores? Yes — the self‑centring three‑point head on the Three‑point internal micrometer M836.700 improves centring and reduces handling effects on delicate bores. Which workshop tasks is this micrometer intended for? Typical uses include watchmaking, micro‑assembly and precision component inspection where internal diameters around 3.5–4 mm must be checked reliably. What distinguishes the analogue dial version for inspection work? The analogue dial of the M836.700 provides tactile feedback and straightforward mechanical control, supporting rapid, repeatable checks without electronic dependencies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5-5 mm Thread Micrometer Anvil Set 60° Tip Diameter 5 mm - Metav IndustryLine
Take advantage of a compact, purpose-built anvil set that matches the measurement range 3.5–5.0 mm and a standard 60° thread profile for consistent results; the paired inserts simplify exchange and reduce downtime. Order the inserts via Metav Werkzeuge or consult the specialists for application advice. Anvil set for thread micrometer, 3.5–5.0 mm — 60° contact, D = 5 mm (Metav IndustryLine) An anvil set for thread micrometers that provides precise contact geometry for measuring standard 60° thread forms in the 3.5–5.0 mm range, intended as a ready accessory for workshop and inspection use For thread micrometers 3.5–5.0 mm 60° contact geometry for metric threads Contact diameter D = 5 mm Supplied as a matched pair of inserts Consistent thread measurement where it matters The matched anvil set ensures repeatable contact geometry for thread inspection across the specified range. Matched inserts preserve the required 60° contact profile and a contact diameter of 5 mm, which together give a defined bearing surface on the flanks of standard metric threads. This controlled contact reduces measurement scatter and supports reliable comparative checks on production batches, helping to maintain traceable quality control procedures within the workshop. Quick interchange, reduced downtime Supplied as a pair, the inserts are intended for straightforward exchange in compatible thread micrometers, enabling rapid restoration of a calibrated measurement configuration. A matched pair avoids mating errors between anvil faces and shortens service intervals; this practicality translates into lower cycle times during setup and less idle time on inspection benches. The low weight and compact form factor also simplify storage and handling in the metrology cabinet. Application fit and compatibility guidance These inserts are designed for use with micrometers configured for the 3.5–5.0 mm measurement band and for the common 60° thread profile used in metric fasteners. The specification D = 5 mm refers to the effective contact diameter of the insert face and is a relevant parameter when assessing contact pressure and localised material deformation on delicate components. For integration into a measurement routine, ensure the host micrometer accepts replaceable inserts and that the gauge line-up matches the required measurement range. Contact Metav Werkzeuge today for ordering and technical clarification — Metav IndustryLine specialists can advise on compatibility, spare insert availability and application notes to ensure fit-for-purpose measurement results Technical data Article number: M309.090.5 GTIN: 4054469118079 Manufacturer: Metav IndustryLine Facts Weight: 0.1 kg Measurement range: 3.5–5.0 mm Angle: 60° Contact diameter: D = 5 mm Tariff number: 90173000 Special features Paired inserts for thread micrometers Designed for 60° thread profiles Accessory for laboratory and workshop metrology Category: Accessories (Messgeräte > Zubehör) FAQ Are these inserts compatible with all thread micrometers? Compatibility depends on the micrometer design; the inserts are intended for micrometers that accept replaceable contacts and cover the 3.5–5.0 mm range. Check the host instrument’s insert interface before fitting the M309.090.5 pair. What does the 60° specification mean for measurement use? The 60° designation identifies the flank angle of the insert, matching standard metric thread forms; using matching flank geometry ensures consistent contact and reduces systematic measurement error when inspecting threads. Is the contact diameter of 5 mm important? Yes. The D = 5 mm contact diameter sets the effective bearing area on the thread flank, influencing local contact pressure and the interaction with softer materials; it is a relevant parameter when selecting inserts for delicate or plated components. Does the anvil set come as single pieces or as a pair? The product is supplied as a matched pair of inserts (article M309.090.5), which preserves geometry consistency for comparative and repeat inspections. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5-6.5 mm Three-Point Internal Micrometer Self-Centering, 0.005 mm Accuracy, Supplied in Case - Metav IndustryLine
The combination of 0.001 mm graduation, ±0.005 mm accuracy and carbide measuring faces ensures reliable internal measurements of very small bores with minimal rework. The self‑centring measuring head and the set of four gauges cover the 3.5–6.5 mm range for precision inspection tasks. Order the set directly via Metav Werkzeuge or ask our consultants if needed. Three‑point internal micrometer set M836.730 — self‑centring, 0.001 mm graduation (Metav IndustryLine) The Three‑point internal micrometer set M836.730 is a compact analogue measuring instrument designed for high‑precision internal diameter checks in fine mechanical and inspection environments. Self‑centring three‑point measuring head Carbide measuring faces for wear resistance 0.001 mm reading with ±0.005 mm accuracy Precision that reduces rework This micrometre set delivers 0.001 mm graduation with an industrial accuracy of ±0.005 mm, which translates into measurable quality gains on the shop floor. The finely graduated thimble and mechanical drive provide stable, repeatable readings suitable for comparative inspection and in‑process checks. For applications where small deviations cause assembly failures, the combination of high resolution and defined accuracy reduces the need for corrective machining and lowers scrap rates. Reliable repeatability for small bores With a measuring range of 3.5–6.5 mm distributed across a set of four gauges, the instrument family covers ultra‑small bores typically found in watchmaking, valve seats and precision subassemblies. The self‑centring three‑point head automatically aligns within the bore, improving concentricity of the contact points and reducing operator influence. As an analogue instrument it is particularly well suited where simple, obstruction‑free readings and tactile feedback are preferred over electronic outputs. Robust design for daily workshop use Durability is addressed by carbide measuring faces, which resist wear and maintain form accuracy over many cycles, safeguarding measurement integrity in production environments. The micrometres include an adjustment ring (4 + 5.5) for quick calibration and fine setting. The compact construction and mechanical operation make these gauges easy to handle during repetitive checks while still delivering the stiffness and control required for precise internal measurements. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M836.730 three‑point internal micrometer set into inspection routines or to arrange supply from our Emmerich warehouse — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: M836.730 GTIN: 4061905041198 Manufacturer: Metav IndustryLine Type: Three‑point internal micrometer set Facts Measuring range: 3.5–6.5 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Analogue reading: yes Pieces per set: 4 Special features Self‑centring three‑point measuring head Carbide measuring faces Adjustment ring: 4 + 5.5 Designed for fine mechanical internal measurements FAQ How precise are the measurements with this set? The Metav IndustryLine three‑point internal micrometer set M836.730 offers a resolution of 0.001 mm and an accuracy of ±0.005 mm, suitable for high‑precision inspection tasks. What measuring range is covered by the gauges? The set covers internal diameters from 3.5 mm to 6.5 mm across four instruments supplied together. Are the measuring faces durable for production use? Yes, the measuring faces are made of carbide, which provides enhanced wear resistance for repetitive measurements in workshop environments. Is the micrometer electronic or mechanical? This instrument is an analogue (mechanical) micrometre with a finely graduated thimble, offering tactile feedback and reliable readings without electronic components. What advantage does the self‑centring head provide? The self‑centring three‑point head ensures consistent contact and better concentricity inside small bores, improving repeatability and reducing operator influence. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com