Precision micrometers for reliable dimensional control
Micrometers deliver precise length and depth measurements in metalworking, enabling repeatable control over component tolerances and process stability. These instruments—available as outside micrometers, inside micrometers and depth micrometers—offer hardened contact faces and fine-thread spindles to ensure long-term accuracy and resistance to wear, with digital versions providing data transfer via USB or Bluetooth for seamless integration into inspection software. Typical uses include measuring small bores, depths and diameters in precision engineering, where features must be defined to micrometre-level accuracy; features such as ratchet thimbles and insulated frames help maintain consistent measuring force and temperature compensation. Choose between robust analog models, IP54-protected digital micrometers or micrometers with an integrated minicomputer for advanced functions like unit conversion, temperature correction and Go/NoGo evaluations.
25mm Micrometer With Spherical Anvils, Colour Touchscreen, Wireless/USB, IP65, ISO17025 Calibrated - Microtech Metrology
Combine industry-grade accuracy of 0.002 mm, robust IP65 protection and versatile wireless + USB data transfer to keep inspection cycles fast and traceable; order this instrument directly via Metav Werkzeuge or consult Metav’s specialists for configuration and delivery. Microtech Micrometer with Spherical Anvils and Microcomputer — 2.4" Colour Touchscreen, Wireless The Microtech micrometer is a compact precision instrument for fine mechanical measurement up to 25 mm, designed for watchmaking, microcomponents and high-precision workshop tasks. Wireless and USB data transfer 2.4" colour touchscreen display Accuracy 0.002 mm for micro measurements IP65-rated protection for shop-floor use Reliable accuracy for micro components Compactly built for small-part inspection, this micrometer offers a 0–25 mm measuring range with a resolution of 0.0001 mm and an accuracy of 0.002 mm, delivering reproducible results for delicate tasks. The spherical anvils (R 5 mm) provide stable contact geometry on curved or uneven surfaces, reducing measurement scatter during repeat checks. Classified for the micro range, the instrument combines short, stiff measuring faces with fine resolution so that intricate components—such as watch parts or precision inserts—can be measured without excessive handling or re-fixturing. Fast data workflows and Industry 4.0 readiness Measurement data are handled on-device and across networks; the unit supports wireless data transfer, USB HID and direct pairing with the Microtech data system (MDS) for live logging. A 2000-value memory manager and folder system store measured values and statistics locally, while functions such as online graphing, Go/No‑Go, min/max, linear and temperature correction reduce post-processing time. An optional MODBUS RTU interface enables integration into production control systems, turning the micrometer into a reliable node within digital inspection chains and cutting manual paperwork from quality routines. Robust design built for daily workshop use Engineered for practical use on the shop floor, the micrometer features a CNC machined aluminium housing and an IP65 ingress protection rating that shield electronics from coolant and dust. The 2.4" colour touchscreen simplifies mode selection, on-screen graphs and parameter entry, reducing operator error and training time. Together these design choices increase uptime and make the device suitable for busy environments where durability and ease of operation matter as much as precision. Traceability and quality assurance A calibration certificate is included, supporting traceable quality control and seamless documentation for inspection protocols. Stored measurement logs and exportable datasets speed up audit preparation and trend analysis, while the compact form factor maintains handling consistency for repeatability. For suppliers and workshops that need verifiable measurement records, the combination of onboard memory and export options ensures data integrity across the supply chain. Contact Metav Werkzeuge to discuss configuration options, delivery from Emmerich and how this Microtech micrometer can be integrated into existing inspection routines Technical Data Article number: 110360258 GTIN: 4061905456695 Brand: Microtech Metrology Data output: Wireless + USB Facts Measuring range: 0–25 mm Resolution: 0.0001 mm Accuracy: 0.002 mm Display: Colour 2.4" touchscreen Memory: 2000 values Protection class: IP65 Special features CNC machined aluminium housing Spherical anvils R 5 mm Wireless to MDS app (Windows, Android, iOS, macOS) Wireless HID and USB HID support Optional MODBUS RTU (RS‑485) Colour touchscreen interface Calibration certificate included Digital measurement instrument (microcomputer) FAQ What measuring range and resolution does this micrometer offer? The micrometer covers a 0–25 mm range with a resolution of 0.0001 mm, making it suitable for high‑precision small-part measurement. Which data transfer options are available for automated logging? Data can be exported wirelessly to the Microtech MDS app, via wireless HID and via USB HID; an optional MODBUS RTU interface is available for industrial networks. Is the device suitable for use on the shop floor? Yes. The IP65 rating and CNC machined aluminium housing provide protection against dust and splashes, supporting routine workshop use without compromising accuracy. Does the instrument come with traceable calibration? A calibration certificate is supplied with the micrometer to support traceability and quality documentation for inspection procedures. What advantages do the spherical anvils provide? The spherical anvils (R 5 mm) ensure consistent point contact on curved or irregular surfaces, improving repeatability when measuring small or complex parts. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Micrometer With Thin Tips, Colour Touchscreen, Wireless/USB, IP65, ISO 17025 Cal Cert - Microtech Metrology
Benefit from ISO 17025 calibration, wireless and USB data output and a compact 0–25 mm measuring range for precise small-part inspection; order the instrument directly via Metav Werkzeuge or contact our consultants for integration advice. Micrometer (Messschraube) — thin-tip anvils, colour touchscreen, Microtech Metrology The micrometer combines thin Ø2 mm measuring faces with an integrated microcomputer for fast, traceable measurements in production and laboratory environments. ISO 17025 calibration with certificate Wireless and USB data output 2.4" colour touchscreen display IP65 aluminium housing, CNC machined Dependable accuracy that shortens inspection cycles Built around a resolution of 0.0001 mm and an accuracy of ±0.003 mm, the instrument delivers repeatable results for fine mechanical components. The small Ø2 mm measuring faces and a rotating spindle with friction ratchet ensure gentle, reproducible contact pressure, reducing measurement scatter on delicate parts. These characteristics translate into fewer re-measures and a faster quality loop, particularly for batch inspections of small diameters and turned parts. Effortless data capture and Industry 4.0 readiness Integrated data handling supports wireless and USB modes, plus four transfer profiles (including Wireless HID and USB HID), enabling seamless logging directly into measurement software or an MDS app. The device stores up to 2000 values and offers on-board statistics and linear/temperature correction functions, which simplifies documentation and allows automated quality records. Optional Modbus RTU output is available for direct connection to industrial control systems, supporting traceable process control and networked measurement workflows. Robust construction for shop-floor reliability A CNC-machined aluminium housing with IP65 protection shields electronics from coolant splash and dust, while the compact form factor fits bench fixtures and small measuring stations. The colour 2.4" touchscreen provides intuitive menus and graphical feedback for Go/NoGo, max/min and graphical trend views, improving operator efficiency. The solid mechanical design reduces the need for frequent recalibration caused by incidental knocks, making the device suitable for production environments. Traceable calibration and practical usability Delivered with an ISO 17025 calibration certificate, the micrometer meets laboratory traceability requirements and supports formal quality systems. The combination of an easy-to-read display, a tactile friction ratchet and a user-friendly memory system keeps measuring straightforward even for operators with basic training. Integration features and a compact measuring range of 0–25 mm make the instrument a practical choice for precision workshops and metrology labs that need both accuracy and digital connectivity. Contact Metav Werkzeuge for application advice and to arrange supply of the Microtech Metrology micrometer with ISO 17025 calibration; expert guidance and prompt delivery are available from Metav Werkzeuge. Technical data Article number: 110650258 GTIN: 4061905040504 Manufacturer: Microtech Metrology Core specifications Measurement range: 0–25 mm Resolution (reading): 0.0001 mm Accuracy: ±0.003 mm IP rating: IP65 Display: 2.4" colour touchscreen Materials & functions Aluminium housing, CNC machined solid block Measuring faces: small Ø2 mm Friction ratchet and rotating spindle Data outputs: Wireless, USB HID, Wireless HID+MAC, Wireless to MDS app Memory: 2000 values, folders and statistics mode Functions: On-line graphic, Go/NoGo, Max/Min, formula, linear and temperature correction Optional: Modbus RTU (RS-485) industrial output Calibration certificate: ISO 17025 (Ilac MRA) included FAQ Is the instrument supplied with an accredited calibration certificate? Yes. The Microtech Metrology micrometer is delivered with an ISO 17025 calibration certificate, providing traceability and meeting laboratory-quality documentation requirements. What measurement range and resolution does the device offer? The gauge covers 0–25 mm with a reading resolution of 0.0001 mm and an accuracy of ±0.003 mm, making it suitable for high-precision small-part inspection. Which data transfer options are available for automated logging? Data transfer supports wireless connection to the MDS app, Wireless HID, Wireless HID+MAC and USB HID; an optional Modbus RTU interface is available for industrial integration. Are the measuring faces suitable for fine-detail work? Yes. The micrometer uses Ø2 mm thin measuring faces and a rotating spindle with friction ratchet to ensure consistent contact and gentle handling of small diameters and delicate components. Can the device withstand workshop conditions? The CNC-machined aluminium housing with IP65 protection guards against dust and splash, making it robust enough for demanding shop-floor environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Micrometer With Two Convex Anvils 0.01mm Graduation, Ratchet, Painted Frame In Case - Metav IndustryLine
Take advantage of the combination of precise mechanics, a fine 0.01 mm reading and a ratchet stop for repeatable measuring force to keep quality control consistent. Order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. M309.046 Micrometer – 0–25 mm, 0.01 mm resolution (Metav IndustryLine) M309.046 is a robust external micrometer designed for precise workshop and inspection tasks, offering a compact measuring range for fine mechanical work. Precision external micrometer 0–25 mm range Resolution 0.01 mm, fine spindle pitch 0.5 mm Ratchet stop for repeatable measuring pressure Supplied in a protective case for transport Consistent, traceable external measurement for production use The solid mechanical design delivers reliable external measurements across the 0–25 mm span. With a resolution of 0.01 mm and a fine spindle pitch of 0.5 mm, the instrument converts small spindle advances into readable graduations, enabling fast go/no-go checks and documented pass/fail decisions on the shop floor. The combination of a stable frame and a matt-chrome measuring drum reduces visual glare and eases reading under workshop lighting. Engineers and quality technicians benefit from a device that reduces measurement variability through mechanical design rather than electronic compensation, making it particularly suitable where simple, repeatable results are required. Built to support repeatable handling and long-term use Wear-resistant surfaces and a painted frame provide everyday durability without adding unnecessary complexity. The micrometer includes a ratchet stop, which standardises the measuring force and thus diminishes operator-induced scatter in repeated readings. A spindle diameter of 6.5 mm contributes to low flex under light loads, while the matt chrome finish on the measuring drum improves contrast for analogue reading. Delivered in a protective case, the instrument is prepared for transport and safe storage, which helps maintain calibration intervals and extends service life in workshops and maintenance departments. Practical benefits explained for users and buyers For purchasing managers and workshop supervisors the micrometer represents a compact solution for tasks such as component checks, set-up verification and incoming inspection of small parts. The analogue design keeps maintenance straightforward: occasional cleaning of the measuring faces and lubrication of the spindle are normally adequate. The instrument’s accuracy of ±0.004 mm places it within a class suitable for precise mechanical work where micrometre-level repeatability is required but ultra-high laboratory precision is not essential. Choosing this micrometer supports efficient quality routines with low training overhead and predictable measurement behaviour. Contact Metav Werkzeuge for tailored application advice on the Metav IndustryLine M309.046 micrometer and arrange supply from our Emmerich stock via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M309.046 GTIN: 4054469117713 ECLASS: 27200302 ETIM: EC003590 Tariff number: 90173000 Facts Measuring range: 0–25 mm Resolution: 0.01 mm Accuracy: 0.004 mm Spindle pitch: 0.5 mm Spindle diameter: 6.5 mm Analog reading: mechanical Special features Ratchet stop for consistent measuring force Frame painted; measuring drum matt chrome-plated Supplied in protective case for transport FAQ What measuring range does the micrometer cover? The Metav IndustryLine M309.046 micrometer covers an external measuring range of 0–25 mm, suitable for fine mechanical components and routine workshop checks. How fine are the graduations and what accuracy can be expected? The micrometer offers a 0.01 mm resolution and an indicated accuracy of ±0.004 mm, providing precise readings for standard quality-control tasks. Is the measuring force standardised? Yes, the instrument is fitted with a ratchet stop to ensure repeatable measuring pressure, which reduces variability between operators during repeated measurements. What protective measures are included for transport and storage? The micrometer is supplied in a protective case to safeguard the instrument during transport and storage and to help maintain measurement integrity. Which materials are used in the micrometer’s construction? The instrument features a painted frame and a matt-chrome plated measuring drum, combining durability with improved legibility of the scale. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Mounting Micrometer Flat Measuring Faces 0.01mm Resolution Standing Spindle 8mm, DIN 863 - Metav IndustryLine
Take advantage of compact, workshop-ready precision with long-term repeatability: the combination of a 0–25 mm measuring range, 0.01 mm graduation and a non-rotating, 8 mm spindle ensures consistent results for small components. Order the installation micrometer directly via Metav Werkzeuge or ask our consultants for tailored advice. M303.151 — Installation micrometer, 0–25 mm, 0.01 mm resolution (Metav IndustryLine) The M303.151 installation micrometer is a compact, workshop-grade device for flat-parallel measurements of small parts and mounting faces, designed for precision fitting and quality control in production environments Compact 0–25 mm measuring range 0.01 mm graduation Flat-parallel measuring faces Fixed 8 mm measuring spindle Conforms to DIN 863 Reliable repeatability for fine mechanical work The installation micrometer delivers dependable repeatability thanks to its fine 0.5 mm spindle pitch and analogue drum calibrated to 0.01 mm divisions. In practice, the combination of a short measuring range and a robust spindle geometry reduces operator-induced variation, so each measurement of small components remains consistent across repeated checks. The flat-parallel measuring faces ensure even contact on flanges and precision seats, which helps to avoid misreads on thin-walled parts. This focus on measurable stability supports faster decision-making on the shop floor and reduces rework cycles. Space-saving design that integrates into assembly and test rigs With a deliberately compact footprint, this micrometer suits installation into fixtures and test benches where space is constrained. The non-rotating 8 mm measuring spindle simplifies fixture design and prevents twisting of delicate workpieces during measurement, while the matt chrome-plated drum offers corrosion-resistant handling in everyday workshop conditions. The parallax-free reading scale improves legibility under varied lighting, making the tool practical for both manual inspection stations and semi-automated test processes. The compact form factor contributes to ergonomic handling and straightforward integration into existing production flows. Standards, accuracy and material considerations for trustable results Built to DIN 863, the instrument meets recognised mechanical micrometer standards and is intended for precision installation tasks within the micro measuring class (0–25 mm). The analogue, mechanical reading method provides direct, maintenance-friendly operation with no electronics to fail in harsh environments. The satin chrome-plated drum resists wear while providing a clear scale contrast. Taken together, these features offer an attractive balance of durability and accuracy for maintenance workshops, jigs and dedicated measuring fixtures where repeatable mechanical performance matters. Contact Metav Werkzeuge to discuss how the Metav IndustryLine M303.151 can be integrated into existing fixtures or inspection routines and to arrange personalised technical advice from our team in Emmerich Technical data Article number: M303.151 GTIN: 4054469115740 eClass: 21170330 ETIM: EC003590 Tariff number: 90173000 Standard: DIN 863 Core dimensions and accuracy Measuring range: 0–25 mm Resolution/graduation: 0.01 mm Spindle pitch: 0.5 mm Measuring spindle diameter: 8 mm Type: Analog (mechanical) Special features Plan-parallel measuring faces Measuring spindle non-rotating (fixed) Parallax-free reading Drum matt chrome-plated Intended for installation / fixture use FAQ What measurement range does this micrometer cover? The M303.151 covers a measuring range of 0–25 mm, classifying it as a compact instrument suitable for fine mechanical and installation tasks. How fine is the reading on the scale? The installation micrometer provides a 0.01 mm graduation on the analogue drum for reliable workshop-level precision. Is the spindle rotating during measurement? No. The measuring spindle on the M303.151 is non-rotating, which aids fixture integration and prevents twisting of the workpiece. Which standard does the instrument conform to? The device is manufactured to DIN 863, ensuring compliance with established mechanical micrometer specifications. What are the measuring faces like? The measuring faces are flat-parallel, designed to provide uniform contact on flanges, seats and similar mounting surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Mounting Micrometer With 49mm Large Drum, 100-division Spindle 8mm, DIN 863 - Metav IndustryLine
Taking advantage of exceptional fine reading and a carbide spindle, this inset micrometer head provides reliably repeatable measurements for precision assembly and quality control. Order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. M303.170 micrometer head — 0–25 mm range, 0.002 mm fine reading (Metav IndustryLine) The M303.170 is a compact inset micrometer head designed for fine mechanical measurement tasks, offering a 0–25 mm measuring range and a high-resolution 0.002 mm reading for repeatable dimensional checks. 0–25 mm measuring range 0.002 mm fine reading Carbide spindle, 8 mm diameter 49 mm large drum for clear reading Precision that reduces rework and inspection time The micrometer head delivers a 0.002 mm reading resolution and a 1 mm spindle pitch, translating measurement movement directly into highly reproducible values; this reduces uncertainty in incoming inspection and shortens rework loops. Conformity with DIN 863 gives a familiar reference for quality systems and simplifies documentation. The combination of a fine graduation (100 divisions on the drum) and a substantial drum diameter supports quick, unambiguous readings during repetitive checks. Robust spindle and clear visual feedback for confident handling A carbide spindle ensures long-term wear resistance where contact accuracy matters most; paired with flat-parallel measuring faces, the head maintains geometric integrity over extended use. The 49 mm large drum improves legibility, which eases operator work and lowers the risk of misreading. The spindle diameter of 8 mm provides a stable bearing surface that contributes to low runout and steady contact force during measurement cycles. Simple integration into fixtures and standardised workflows Designed as an inset measuring unit, the head is ready for mounting into gauges, fixtures or custom assemblies; the compact dimensions correspond to the Mikro class for small-range metrology (0–25 mm). The analog design with 100 drum divisions is ideal where mechanical simplicity and immediate visual verification are preferred over electronic output. For organisations requiring traceable processes, the reference to DIN 863 streamlines compatibility with calibration schedules and inspection plans. Ideal uses and practical advantages in the workshop This micrometer head is suited to fine mechanical workshops, toolrooms and assembly lines that demand repeatable small-range measurements — from small components to fine threads and turned features. The sturdy spindle and clear drum marking deliver both tactile reliability and visual certainty, helping to prevent measurement drift and supporting faster inspection cycles. Its compact inset form factor allows neat integration into bespoke fixtures without occupying excess space. Order the Metav IndustryLine micrometer head M303.170 from Metav Werkzeuge for prompt dispatch from Emmerich, or ask our consultants for technical integration support by email or phone Technical data Article number: M303.170 GTIN: 4054469115771 Manufacturer: Metav IndustryLine Norm: DIN 863 eClass: 21170330 ETIM: EC003590 TARIC: 90173000 Core measurements Measuring range: 0–25 mm Reading resolution: 0.002 mm Spindle diameter: 8 mm Spindle pitch: 1 mm Drum diameter: 49 mm Features / Special characteristics Carbide spindle Flat-parallel measuring faces Analog reading, 100 divisions on drum Inset mounting style Category: Messschrauben FAQ What measuring range does this micrometer head cover? The Metav IndustryLine micrometer head M303.170 covers a measuring range of 0–25 mm, placing it in the micro class for compact, high-precision work. What is the resolution and how does it affect repeatability? Resolution is 0.002 mm; this fine reading improves repeatability for small features and reduces variation between successive measurements. Which standard does the unit comply with? The device is manufactured to DIN 863, a common mechanical micrometer standard that supports integration into documented quality procedures. Is the spindle wear-resistant for long-term use? Yes, the M303.170 uses a carbide spindle, delivering enhanced wear resistance and sustained contact accuracy in production environments. How is the unit intended to be mounted? The design is an inset measuring head, suitable for installation in gauges or fixtures where a compact, flush-mounted measuring element is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Nut Gauge Micrometer With Ratchet Stop, 0.01mm Resolution, Supplied In Case - Metav IndustryLine
Combining a precise 0–25 mm measuring range with a 0.01 mm reading and a friction ratchet for constant measuring pressure, this groove micrometer delivers repeatable slot and keyway checks in fine mechanical work. Order the M307.021 directly via Metav Werkzeuge or ask our consultants if needed. M307.021 Groove micrometer — analogue instrument, 0–25 mm, friction ratchet (Metav IndustryLine) The M307.021 is an analogue groove micrometer designed for precise slot and groove measurement in fine mechanical and toolroom applications. Analogue micrometer with 0.01 mm reading High accuracy ±0.005 mm Friction ratchet for consistent pressure Supplied in protective case Consistent, repeatable groove checks with controlled measuring force The instrument combines a 0–25 mm range with a 0.01 mm scale and an industrial-grade accuracy of ±0.005 mm, delivering the precision expected in micro‑mechanical inspection. The integrated friction ratchet ensures a reproducible contact force on each measurement, reducing operator influence and improving comparability across repeated checks. A non‑rotating spindle protects the measured surface from damage and avoids reading errors caused by spindle rotation. These features make the tool a reliable choice for tasks where repeatability is critical, such as verifying slot widths, keyways and narrow grooves. Compact geometry tailored for fine workshop and toolroom tasks With compact measuring faces sized 0.75 x 6.5 mm, the micrometer is optimised for confined slots and narrow features frequently encountered in jigs, fixtures and small assemblies. The narrow face geometry enables access to tight grooves while maintaining sufficient contact area for stable readings. As an analogue, mechanical instrument it offers direct visual feedback and simple serviceability in workshop environments. The short measuring span places the device in the micro class (measuring range up to 100 mm), which is ideal when maximum stiffness, low deflection and fine tactile control are required in delicate inspection work. Ready for workshop use and traceable delivery The tool is supplied in a protective plastic or wooden case suitable for transport and safe storage of precision instruments. Built for routine use, the mechanical design avoids complex electronics while providing durable performance and straightforward maintenance. The metrology and logistical backing from the manufacturer guarantees consistent availability and a quality filter for the European market, reflecting Metav’s approach to democratising precision for workshops and specialist suppliers. Calibration status and certificates are provided where stated in the product labelling and ordering information. Contact Metav Werkzeuge for detailed specifications or to arrange supply of the Metav IndustryLine M307.021 groove micrometer — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M307.021 GTIN: 4054469117263 Category: Micrometers (Messschrauben) eClass: 21170328 ETIM: EC003590 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution (reading): 0.01 mm Accuracy: ±0.005 mm Spindle pitch: 0.5 mm Measuring faces: 0.75 x 6.5 mm Special features Analogue (mechanical) instrument Friction ratchet for reproducible force Non‑rotating spindle to protect surfaces Supplied in plastic or wooden protective case (for transport) Intended for groove and slot measurement Classified for micro applications (measuring range up to 100 mm) FAQ What measuring range does the instrument cover? The instrument covers a measuring range of 0–25 mm and is intended for micro‑range inspection tasks. How fine is the reading and what accuracy can be expected? The scale reads in 0.01 mm increments and the device achieves an accuracy of ±0.005 mm under appropriate working conditions. Is the micrometer suitable for measuring narrow grooves and keyways? Yes — the narrow measuring faces (0.75 x 6.5 mm) and the groove‑specific design make the M307.021 suitable for slots, keyways and similar confined features. Does the spindle rotate during measurement and why does that matter? The micrometer uses a non‑rotating spindle, which prevents surface damage and improves measurement reliability on delicate parts. How is the instrument delivered and protected in transit? The instrument is supplied in a protective plastic or wooden case appropriate for the safe transport of precision tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Outside Micrometer 0.001mm Resolution Ratchet Thimble, ISO 17025 Calibrated - Microtech Metrology
Take advantage of 1 µm resolution, ISO 17025 calibration and a ratchet stop for reproducible measuring force; the result is reliable, traceable external measurement in a compact format. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Metrology micrometer – 0–25 mm, 0.001 mm resolution, ISO 17025 calibrated The Microtech Metrology micrometer is a precision outside micrometer designed for sub‑millimetre external measurements in laboratory and precision workshop environments. 1 µm resolution for fine readings ISO 17025 calibration certificate included Ratchet stop for repeatable measuring force 0–25 mm range for micro measurements Precision that meets laboratory demands The instrument delivers 1 µm resolution with an indicated accuracy of ±0.002 mm, which places it in the high‑precision mechanical category. The analogue, friction‑thimble design provides tactile feedback and fine control during measurement, while the compact 0–25 mm span classifies it within the micro range (10–100 mm) — ideal for components where minimal clearance and true surface contact matter. These characteristics reduce rework and support consistent quality control across small batches and prototype runs. Traceable calibration for audit-ready inspection Supplied with an ISO 17025 calibration certificate, the micrometer offers documented traceability to recognised standards. This independent calibration confirms the device’s measurement performance and simplifies integration into quality systems and inspection reports. For regulated environments and suppliers who must demonstrate measurement traceability, the included certificate removes uncertainty and accelerates acceptance during audits. Consistent measuring force and user‑friendly handling Equipped with a ratchet stop and a friction thimble micrometer head, the tool enforces a repeatable measuring force to limit operator‑induced variation. The Ø6.5 mm anvil provides a stable contact area that helps maintain measurement repeatability on small diameters and faces. As a mechanical instrument with analogue readout, it combines robustness with immediate readability, making it suitable for bench work, toolroom checks and fine mechanical assembly. Where this micrometer proves most effective This instrument is particularly suited to precision engineering, watchmaking, tool manufacturing and laboratory inspection tasks where compactness and sub‑micrometre resolution are required. The mechanical construction and calibration pedigree make it a dependable choice for production sampling, first‑article inspection and research‑grade measurement campaigns. Its combination of tactile control and certified accuracy helps maintain throughput without compromising measurement confidence. For traceable, sub‑micrometre external measurement choose the Microtech Metrology micrometer and order via Metav Werkzeuge for fast dispatch from Emmerich; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice. Technical data Article number: 110110250 GTIN: 4061905456664 Brand: Microtech Metrology Type: Micrometer (outside) Eclass: 21170328 Facts Measuring range: 0–25 mm Resolution: 0.001 mm (1 µm) Accuracy: ±0.002 mm Anvil diameter: Ø6.5 mm Ratchet: Yes Analog: Yes Calibration: ISO 17025 certificate included Special features Friction thimble micrometer head Mechanical analogue readout Supplied with calibration certificate Classified for micro range (10–100 mm) Suitable for laboratory and precision workshop use FAQ What level of accuracy can be expected from this micrometer? The micrometer from Microtech Metrology offers an accuracy of ±0.002 mm and a resolution of 0.001 mm, with performance documented on the included ISO 17025 calibration certificate. Is a calibration certificate provided with the instrument? Yes, the tool is supplied with an ISO 17025 calibration certificate, so measurements are traceable and suitable for audit‑grade applications. How does the ratchet stop improve measurement results? The ratchet stop ensures a consistent measuring force on each measurement; the Microtech Metrology micrometer uses this feature to reduce operator variation and improve repeatability. For which applications is this micrometer best suited? The instrument is ideal for fine mechanical work, including watchmaking, precision engineering, toolroom checks and laboratory inspection of small external features. Is the micrometer analogue or digital? This is an analogue (mechanical) micrometer with a friction thimble and a 0.001 mm reading, offering tactile control and robustness for routine precision work. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Outside Micrometer With Ratchet Stop, Calibrated To ISO 17025 - Microtech Metrology
The combination of consistent ratchet-stop measuring, sub-micron-level accuracy and delivery with an ISO 17025 calibration certificate ensures reliable inspection results and traceable quality control. Benefit from precise external measurements in fine mechanical work and order the micrometer directly via Metav Werkzeuge or consult our advisors for technical clarification. Microtech Metrology micrometer — Outside micrometer 0–25 mm, 0.002 mm accuracy The Microtech Metrology micrometer is a compact outside micrometer designed for accurate external measurements in workshop and laboratory environments. High accuracy: 0.002 mm tolerance Ratchet-stop spindle for consistent measuring force Calibrated to ISO 17025 with certificate included Precision where small dimensions matter Small components demand repeatable, verifiable measurement. With a measuring range of 0–25 mm and an accuracy of 0.002 mm, this analogue micrometer delivers the fine resolution required for precision engineering and quality assurance. The ratchet-stop spindle controls measuring force to reduce operator-induced variation, so readings are more consistent across repeated measurements. Classified in the Micro category (compact instruments for fine mechanical work), the instrument is particularly suited to watchmaking, small subassemblies and precision mould components where stiffness and minimal lever action are advantages. Built for repeatable, certified measurement results Traceability and documentation are central to industrial metrology. The instrument is supplied fully calibrated to ISO 17025, and a calibration certificate is included with the delivery. This simplifies integration into quality systems and audit trails. The analogue scale offers a clear graduated readout with a standard reading increment of 0.01 mm, while the reported accuracy of ±0.002 mm indicates the instrument’s manufacturing and calibration quality. For workshops and inspection labs seeking dependable, certified artefacts for routine checks, this measuring instrument combines practical handling with laboratory-level verification. Practical integration into the workshop workflow Compact form and intuitive mechanics make the micrometer straightforward to use during production checks and bench inspections. The ratchet-stop guarantees the correct measuring pressure every time, cutting rework and measurement scatter. Supplied as an analogue tool, the instrument needs no batteries and is robust in typical workshop conditions; the included ISO 17025 calibration certificate confirms initial conformity and reduces administrative setup time. Metav’s delivery network and product range further enable quick replenishment and standardisation across workbenches, helping small and medium-sized operations raise their measurement capability without complex procurement. Contact Metav Werkzeuge today for certified micrometers, specification advice and delivery from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 110110251 GTIN: 4061905456657 Manufacturer: Microtech Metrology Key figures Measuring range: 0–25 mm Accuracy: ±0.002 mm Reading/graduation: 0.01 mm Type: Analogue micrometer Ratchet stop: Yes Calibration: ISO 17025 certificate included Special features Application: outside/external measurements Classification: Micro class (compact precision) Delivery: calibrated with certificate (ISO 17025) Suitable for workshop and laboratory use FAQ What measuring range does the micrometer cover? The micrometer covers a range of 0–25 mm, making it suitable for small, precise external measurements. Is the micrometer calibrated on delivery? Yes. The Microtech Metrology micrometer is delivered fully calibrated and includes an ISO 17025 calibration certificate. What accuracy and reading can be expected? The instrument is specified with an accuracy of ±0.002 mm and a reading/graduation of 0.01 mm. Does the micrometer include a ratchet stop? Yes. The ratchet-stop spindle is included to ensure consistent measuring force and repeatable results. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Precision Caliper With Large Dial Readout, Hardened Measuring Faces, Ratchet Stop, Supplied In Case - Metav IndustryLine
Reliable measurement with a 0–25 mm range, 0.01 mm resolution and a ratchet spindle ensures repeatable contact force; hardened measuring faces and a large reading dial support fast, error‑reduced inspection. Order the M309.052 micrometer directly via Metav Werkzeuge or consult our specialists for specification advice. M309.052 micrometer — 0–25 mm, 0.01 mm resolution (Metav IndustryLine) The M309.052 micrometer is a precision 0–25 mm analogue measuring instrument designed for workshop measuring tasks and routine quality control. 0–25 mm measuring range 0.01 mm resolution Hardened measuring faces 6.5 mm Ratchet spindle for consistent contact force Precision where traceable decisions begin The instrument delivers a 0–25 mm measuring span with a 0.01 mm graduation, making it suitable for fine machining and finish control where small deviations have a direct cost impact. The combination of fine resolution and a mechanical thimble reduces interpretation errors compared with coarser gauges, allowing processes to be adjusted early and scrap rates to fall. This measurable repeatability supports rational planning of inspection intervals and process tuning in production environments. Built for reliable workshop use and repeatability A ratchet spindle provides consistent measuring pressure, avoiding variation from operator-applied force; the spindle pitch of 1 mm enables fine, predictable advance per turn. The hardened measuring faces (6.5 mm diameter) resist wear during daily use, so measurement uncertainty stays low over time. The large analogue reading disc improves legibility under workshop lighting, accelerating throughput at incoming inspection or on the machine bench. At 0.2 kg the gauge balances stability and manoeuvrability for handheld checks. Practical handling, storage and typical applications Delivered in a protective case for secure transport and storage, this analogue gauge is ideal for routine checks on turned and milled parts, sheet thickness spot checks and assembly verification. The design suits bench testing and mobile inspection rounds alike, giving technicians a robust instrument for quick go/no‑go decisions and documentation of measurement results. Its mechanical simplicity makes maintenance straightforward and keeps downtimes to a minimum. Contact Metav Werkzeuge today for procurement advice and delivery options for the Metav IndustryLine M309.052 micrometer with protective case Technical Data SKU: M309.052 GTIN: 4061905040269 Category: Messschrauben (micrometers) eClass: 21170328 ETIM: EC003590 Tariff number: 90173000 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–25 mm Resolution / Accuracy: 0.01 mm Measuring face diameter: 6.5 mm Spindle pitch: 1 mm Weight: 0.2 kg Special features Analogue (mechanical) micrometer type Ratchet spindle for repeatable measuring force Hardened measuring faces for wear resistance Large reading dial for improved legibility Supplied in a protective transport case FAQ What measuring range does this micrometer cover? The measuring range is 0–25 mm for the M309.052 micrometer by Metav IndustryLine. What resolution and accuracy can be expected? The device provides a 0.01 mm resolution; this is the stated measuring increment for the instrument. Are the measuring faces hardened? Yes, the gauge has hardened measuring faces with a diameter of 6.5 mm to maintain accuracy during regular use. How does the ratchet spindle benefit measurements? The ratchet spindle on the M309.052 ensures a consistent contact force, improving repeatability across multiple measurements. Is the micrometer supplied ready for transport and storage? The instrument is supplied in a protective case suitable for transport and secure storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Precision Micrometer With 35mm Anvil Faces, Touchscreen Display, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Combine ISO 17025 traceability, ±0.004 mm accuracy and Wireless/USB data transfer to secure repeatable, workshop-ready measurement; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Micrometer — Microtech Metrology, 1.54" touchscreen and Wireless/USB The Digital Micrometer from Microtech Metrology provides high-precision 0–25 mm measurement with 35 mm disc measuring faces, engineered for fine mechanical and watchmaking tasks in compact workshops. ISO 17025 calibration with certificate ±0.004 mm measurement accuracy Wireless and USB data output 1.54" touchscreen display Workshop-grade accuracy for reproducible results The instrument is classified in the micro range (0–25 mm), making it ideal where short measuring faces and low torsion are essential. With a documented accuracy of ±0.004 mm, the device reduces rework and supports consistent quality control in precision assemblies. The measuring range of 0–25 mm covers delicate tasks while retaining the stiffness required for repeatable readings; customers benefit from professional-level metrology in a compact format. Seamless data capture that speeds inspection Integrated Wireless and USB outputs allow direct transfer of measurement data into inspection software or spreadsheets, eliminating transcription errors and accelerating reporting. The 1.54" touchscreen display provides clear readout and quick menu navigation, while the digital interface supports traceable data logging for process audits. This connectivity turns manual gauging into a digital workflow, improving throughput in incoming inspection or small-batch production. Ergonomic design that reduces operator error Large disc measuring faces Ø35 mm distribute contact force and stabilise parts during measurement, and the non-rotating spindle limits eccentric error on delicate surfaces. The instrument’s compact form factor and tactile control elements suit single-handed operation in confined setups. These design choices minimise user influence on readings and prolong mechanical life, making the micrometer a dependable tool on the bench or in the jig room. Calibrated and document-ready for quality systems Delivered fully calibrated to ISO 17025, the micrometer arrives with an accredited calibration certificate, enabling immediate use in regulated inspection routines or internal quality audits. The combination of accredited calibration and digital data output supports traceability requirements and simplifies compliance documentation. Relying on certified measurement tools reduces uncertainty in acceptance decisions and strengthens supplier confidence. Choose the Microtech Metrology digital micrometer for traceable, workshop-ready precision; contact Metav Werkzeuge in Emmerich for technical guidance or to place an order — tel. +49 2822 7131930, e‑mail info@metav-werkzeuge.com Technical Data Article number: 110780257 GTIN: 4061905457432 Brand: Microtech Metrology Measurement range: 0–25 mm Accuracy: ±0.004 mm Display: Touchscreen 1.54 in Data output: Wireless, USB Measuring faces: disc Ø35 mm Non-rotating spindle Digital instrument Calibrated to ISO 17025 (certificate included) eClass: 21170328 ETIM: EC003590 Facts Measurement range (min): 0 mm Measurement range (max): 25 mm Resolution/readout: 0.0001 mm (display base value) SKU: 110780257 GTIN: 4061905457432 Special features Disc measuring faces for larger contact area Non-rotating spindle reduces eccentricity Wireless data transfer for inspection workflows USB connection for local logging Accredited ISO 17025 calibration certificate supplied FAQ How accurate is the micrometer and what range does it cover? The Digital Micrometer from Microtech Metrology measures from 0–25 mm with an accuracy of ±0.004 mm, suitable for fine mechanical and precision workshop tasks (SKU 110780257). Is the instrument ready for use in a certified quality system? Yes. The micrometer is supplied fully calibrated to ISO 17025 and includes the calibration certificate, allowing direct integration into quality documentation and traceable inspection procedures. How can measurement data be exported from the device? Measurement values can be transmitted via Wireless or through the USB connection; the touchscreen display simplifies local checks while the data outputs support digital logging and SPC workflows. What advantages do the disc measuring faces and non-rotating spindle provide? The disc measuring faces (Ø35 mm) increase contact stability on uneven parts, and the non-rotating spindle minimises eccentric errors, improving repeatability on small or sensitive components. Is the display easy to use in routine inspection? The 1.54" touchscreen offers a clear readout and straightforward menu control, speeding up repetitive checks and reducing interpretation errors during batch inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Precision Outside Micrometer, Anti‑Magnetic, Hardened Measuring Faces, Friction Ratchet, Supplied in Case - Metav IndustryLine
Take advantage of the combination of workshop-grade durability, antimagnetic construction and a friction ratchet that ensures repeatable contact force for consistent inspection results. Order the micrometer directly via Metav Werkzeuge or ask their consultants for application advice. Micrometer M304.708 — 0–25 mm antimagnetic micrometer with hardened faces The Micrometer M304.708 is a precision 0–25 mm micrometer designed for workshop and inspection tasks, combining antimagnetic construction with a friction ratchet for repeatable measurements. Antimagnetic construction Hardened special-steel measuring faces Friction ratchet for consistent measuring force Matt chrome-plated thimble for clear readout High repeatability and measurable accuracy for quality control The analogue thimble provides a reading step of 0.01 mm, supported by a spindle pitch of 0.5 mm, which together deliver dependable incremental control during fine adjustments. Conformity with DIN 863 documents the instrument’s placement within recognised standards for screw micrometers, making it suitable for routine inspection and machine-shop quality checks where precision and traceable technique are required. The integrated friction ratchet limits over-tightening, improving reproducibility between operators and reducing the risk of rework. Built to withstand daily industrial use Mechanical robustness is evident in the hardened measuring faces and the matt chrome-plated measuring drum, which resist wear and maintain legibility under continuous use. The antimagnetic construction minimises influence from stray magnetic fields and reduces the attraction of ferrous debris to the anvils, sustaining measurement integrity over time. At approximately 0.3 kg, the instrument balances solidity with handheld usability, supporting frequent handling on the shop floor without undue fatigue. Efficient inspection workflow and practical handling The compact 0–25 mm range suits fine mechanical and small-part work, offering a balance between manoeuvrability and sufficient reach for most detail inspections. The pronounced knurling and matt finish on the thimble improve tactile control and visual contrast for the analogue scale, so readings remain quick and reliable during serial checks. Classification as an analogue workshop micrometer makes this gauge a pragmatic choice for production testing, maintenance tasks and incoming inspection, where consistent force application and clear feedback speed up throughput while safeguarding measurement quality. For further technical clarification, Metav’s specialists provide application guidance tailored to typical industrial scenarios. Contact Metav Werkzeuge for expert advice on the Metav IndustryLine micrometer M304.708 — technical consultation and dependable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M304.708 GTIN: 4054469167022 Category: Micrometers (Messschrauben) Standard: DIN 863 Core specifications Measuring range: 0–25 mm Resolution (reading): 0.01 mm Spindle pitch: 0.5 mm Thimble diameter: 6.5 mm Weight: 0.3 kg Features and materials Antimagnetic construction Measuring faces: hardened special steel Thimble: matt chrome-plated Friction ratchet Analogue operation FAQ What measurement range does the micrometer cover? The micrometer covers a 0–25 mm range and is therefore optimised for fine mechanical and small-part inspections. How fine is the reading on this instrument? The thimble provides an analogue reading step of 0.01 mm, allowing reliable incremental readings for workshop and inspection use. Is the micrometer suitable for use near magnetic fields? Yes, the instrument features antimagnetic construction, which reduces interference and the attraction of ferrous particles to the measuring faces. Which quality standard does this micrometer meet? The micrometer conforms to DIN 863, placing the gauge within established standards for screw micrometers used in production and inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Setting Gauge For Thread Micrometer 60° For Thread Inserts 0.01kg - Metav IndustryLine
Benefit from a compact workshop reference that combines precise geometry and simple handling: the 25 mm setting gauge with a 60° profile ensures fast, repeatable adjustment of thread measuring instruments, while its lightweight construction keeps fixture time to a minimum. Order or request guidance via Metav Werkzeuge for reliable supply and specification advice. Setting gauge 25 mm for thread micrometer (60°) — Metav IndustryLine accessory A Setting gauge 25 mm for thread micrometer designed as a compact reference for setting and checking the profile of thread measuring anvils and screw gauges in quality control and workshop environments. 25 mm setting standard for thread micrometers 60° profile for ISO thread measuring 55° variant suitable for Whitworth threads Compact 0.1 kg body for effortless positioning Dependable reference geometry for consistent measurement The small-format setting standard provides a fixed, repeatable profile that simplifies alignment of thread measuring devices. With a nominal size of 25 mm and a clearly defined 60° flank angle, the item functions as a metrological reference to reduce setup variability and measurement scatter. The controlled geometry was developed for compatibility with common thread micrometers and gauge anvils, enabling faster checks and fewer re-adjustments in serial inspection routines. The compact form factor also minimises contact area during positioning, which supports stable and reproducible contact conditions. Two profile options for broad thread coverage The device supports the 60° profile used for metric and many standard ISO threads and accommodates a 55° profile for Whitworth applications when required. This versatility means one compact reference can serve multiple thread systems, reducing the number of dedicated setting tools needed at the inspection bench. Where Whitworth threads are present, the alternative flank angle provides a proper seating geometry, ensuring the measuring instrument is set to the correct effective diameter before any critical measurement is taken. Workshop-ready design that saves time and handling effort Weighing only 0.1 kg, the gauge is intentionally lightweight to facilitate quick manual positioning and to integrate easily into existing inspection workflows or fixtures. Its compact dimensions suit bench-top quality control and portable measuring setups, where space and handling comfort matter. As an accessory in the Metav IndustryLine portfolio, the component is intended to improve process efficiency: fewer tool changes, faster verification cycles and clearer traceability during repeat inspections. For supply and product advice on the Metav IndustryLine setting gauge (SKU M309.097.0), contact Metav Werkzeuge in Emmerich for order processing and technical clarification via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: M309.097.0 GTIN: 4054469118239 Manufacturer: Metav IndustryLine Facts Nominal size: 25 mm Angle: 60° Weight: 0.1 kg Tariff number: 90173000 ECLASS: 21170102 Special features 60° profile for thread inserts 55° option for Whitworth threads Accessory for thread micrometers Category: Measuring instruments → Accessories FAQ How does the setting gauge assist a thread micrometer? The setting gauge provides a fixed profile reference that is placed against the measuring anvils to set or verify the effective measurement geometry; the Setting gauge 25 mm for thread micrometer (Metav IndustryLine, SKU M309.097.0) ensures correct flank contact and repeatable alignment. Which thread profiles are addressed by this reference? The reference covers a 60° flank profile for standard metric and common ISO threads and additionally offers a 55° geometry for Whitworth threads where required. What are the size and weight of the reference? The gauge has a nominal size of 25 mm and a mass of 0.1 kg, providing a compact and easily handled workshop reference. Can the gauge be used with different brands of thread micrometers? Yes, the accessory is designed as a universal setting standard compatible with standard thread measuring micrometers and gauge anvils used across manufacturers. What classification codes apply to this accessory? Tariff number 90173000 and ECLASS 21170102 are assigned for customs and classification purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Sheet Thickness Digital Micrometer Standing Thimble 0.001mm Readout IP65, Friction Ratchet, Plastic Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement, robust IP65 protection and workshop-ready ergonomics for reliable sheet-thickness inspection. Benefit from fast digital readings and a durable construction that keeps downtime low; order the instrument directly via Metav Werkzeuge or consult our team for application advice. Digital micrometer for sheet thickness M302.280 — 0–25 mm, 0.001 mm resolution, IP65 (Metav IndustryLine) The Digital micrometer for sheet thickness M302.280 is a compact, standing instrument designed for precise measurement of metal sheets and thin components in production and quality control environments. 0.001 mm resolution for fine measurement IP65 dust and splash protection Measuring range 0–25 mm for sheet work Includes protective transport case Accurate readings for thin materials This electronic instrument delivers 0.001 mm display resolution across a 0–25 mm measuring span, making it ideal for demanding sheet‑metal measurement and quality checks. The spindle geometry and 2 mm/rev pitch combine to give a useful balance between fast approach and fine adjustment, reducing cycle time without sacrificing control. Conforming to DIN 863, the device supports traceable workshop routines and predictable measurement behaviour, which helps to reduce rejects and increase production consistency. Built to endure the workshop Engineered for everyday use, the micrometer offers IP65 protection so that dust and water splash do not compromise electronics or mechanics, enhancing service life in harsher shop conditions. The frame is painted for impact resistance and the measuring drum is matt chrome‑plated, while the hardened measuring faces provide long-term wear resistance; the face diameter of 6.5 mm keeps contact stress well distributed. A friction ratchet ensures reproducible measuring force, which reduces operator‑induced variation and supports repeatable data for quality documentation. Digital features that accelerate inspection A clear digital display includes ON/OFF, ABS/INC, SET and UNIT functions for immediate switching between modes and units, and a data output RB 4.1 is provided for process integration or transfer to data loggers. The balanced weight (approx. 1.3 kg) and the compact standing design suit bench‑top use, while delivery in a protective transport case simplifies storage and prevents damage between shifts. As a result, the metrological benefits of the device translate directly into faster inspection cycles and fewer measurement interruptions. The Metav IndustryLine pedigree underlines availability and a European quality filter for consistent supply. Choose the Metav IndustryLine M302.280 for dependable sheet-thickness measurement and contact Metav Werkzeuge in Emmerich for specification support or to arrange supply Technical data Article number: M302.280 GTIN: 4054469151519 Category: Micrometers (Messschrauben) Weight: 1.3 kg Core technical figures Measuring range: 0–25 mm Resolution / readout: 0.001 mm Spindle pitch: 2 mm per revolution Measuring face diameter: 6.5 mm Protection class: IP65 Standard: DIN 863 Special features and materials Digital display with ON/OFF, ABS/INC, SET, UNIT Friction ratchet for reproducible measuring force Frame painted; measuring drum matt chrome‑plated Hardened measuring faces Includes protective transport case Data output: RB 4.1 FAQ What is the measuring range and resolution of this micrometer? The micrometer measures from 0 to 25 mm with a display resolution of 0.001 mm, suitable for fine sheet‑thickness checks. Is the device suitable for workshop use with coolant or splash exposure? Yes, the unit is rated IP65, which protects the instrument against dust ingress and water splash typical in workshop environments. Does the micrometer provide a stable measuring force? The integrated friction ratchet secures a consistent measuring force; combined with hardened faces this improves repeatability for routine inspections. Can measurement data be exported to a PC or data logger? The instrument offers a RB 4.1 data output for connection to compatible data collection systems and digital readout integration. Which standard does the micrometer conform to? The device is manufactured in accordance with DIN 863, aligning it with common metrological practices for micrometers. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Small-Tip Digital Micrometer Friction Thimble, IP65, ISO 17025 Calibrated Certificate Included - Microtech Metrology
Take advantage of IP65 protection, an ISO 17025 calibration certificate and the fine Ø2 mm measuring tips to achieve reproducible results on small features; order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice. Microtech CertiMet Small Tip Digital Micrometer — 0–25 mm, IP65, ISO 17025 calibrated The Microtech CertiMet Small Tip Digital Micrometer is a compact digital micrometer with Ø2 mm small-tip anvils, friction thimble and an IP65 aluminium body, optimised for precision measurement of fine components. IP65 aluminium housing for harsh environments ISO 17025 calibration with certificate included Small Ø2 mm tips for confined measurements Friction thimble and mm/inch functions Precision where every micron matters Classified in the Micro range for measuring ranges up to 0–25 mm, this instrument is tailored to tasks that demand fine detail control, such as micro‑mechanical assemblies and small-part inspection. The device delivers a 0.001 mm resolution on the digital display and a practical accuracy of ±0.004 mm, values that support confident pass/fail decisions in routine quality checks. With such resolution the instrument shortens inspection cycles while maintaining traceable measurement quality, turning fine tolerances into verifiable data without added complexity. Repeatable measurement force and robust environmental resistance Consistent contact pressure is achieved by the integrated friction thimble, which reduces operator variation and improves repeatability across multiple readings. The rotating spindle supports smooth engagement with the workpiece and protects delicate measuring faces during approach. Housed in an aluminium frame with IP65 ingress protection, the tool resists dust and low‑pressure water jets, allowing reliable use at the machine bench or in light shop-floor exposure. The digital display provides immediate readings with functions such as mm/inch, HOLD, ON/ABS and SET for convenient data handling and faster measurement cycles. Traceability and certification for quality systems Delivered fully calibrated to ISO 17025, the micrometer arrives with an official calibration certificate that documents measurement traceability and supports internal audits. This certified status simplifies integration into quality control procedures and supplier verification workflows: calibration evidence accompanies the instrument, removing ambiguity about baseline accuracy and enabling confident acceptance for manufacturing or laboratory environments. Practical handling for everyday precision tasks Small Ø2 mm tips grant access to narrow grooves, ring bores and micro steps where standard anvils cannot reach, while the compact form factor keeps the device manoeuvrable for single‑hand operation. The combination of a clear numeric display and tactile adjustment via the thimble accelerates routine inspections, making the instrument suitable for toolrooms, precision engineering, laboratory checks and watchmaking tasks. Supplied by a European quality distribution hub, the package balances laboratory‑grade calibration with workshop usability to support production continuity. Contact Metav Werkzeuge to arrange supply of the Microtech CertiMet Small Tip digital micrometer with ISO 17025 certificate or to discuss matching instruments for specific application requirements Technical data Article number: 110650251 GTIN: 4061905040276 Manufacturer: Microtech Metrology Core technical data Measuring range: 0–25 mm Resolution (display): 0.001 mm Accuracy: ±0.004 mm Protection class: IP65 Measuring faces: small Ø2 mm Digital functions: ON/ABS, SET, HOLD, mm/inch Delivery: ISO 17025 calibration certificate included Special features Friction thimble for repeatable measuring force Rotating measuring spindle Aluminium housing Digital electronic display Suitable for fine detail and micro measurements FAQ What measuring range does the instrument cover? The micrometer covers a measuring range of 0–25 mm, placing it in the Micro category for fine‑feature inspection. Is the instrument supplied with a calibration certificate? Yes — the device is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate. How fine are the measuring tips and what are they for? The tool has Ø2 mm measuring tips designed to access narrow bores, small steps and confined features that standard anvils cannot reach. Can the micrometer be used in a workshop environment? The IP65 aluminium housing protects against dust and low‑pressure water jets, making the instrument suitable for typical workshop and light production environments. Which display functions are available for recording measurements? The instrument offers a digital display with ON/ABS, SET, HOLD and mm/inch functions for flexible reading and convenient measurement routines. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thread Measuring Micrometer With Microcomputer, Color 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of ISO 17025 calibration, high measurement resolution and wireless data transfer for reliable thread inspection in production and quality control. Order the device directly via Metav Werkzeuge or contact the consultants for technical advice. Thread micrometre — digital instrument for metric 60 thread measurement, 0–25 mm, Microtech Metrology Thread micrometre is a compact, workshop-ready instrument for precision inspection of metric threads, built for traceable results in small-part production and laboratory checks. ISO 17025 calibration and certificate included High accuracy ±0.003 mm with 0.0001 mm readout Wireless and USB data output for traceable logs Colour 2.4" touchscreen for rapid operation Precision and traceability that support reproducible quality The instrument delivers laboratory-grade repeatability through a combination of ±0.003 mm accuracy and a fine 0.0001 mm readout, which reduces uncertainty in routine inspections. Supplied fully calibrated under ISO 17025, the unit includes a calibration certificate to document conformity and support internal quality systems and audit trails. This configuration makes the device suitable for acceptance testing and sampling tasks where documented traceability is required. Efficient data capture and workflow integration Equipped with Wireless+USB data output and a Colour 2.4" touchscreen, the device simplifies recording and transfer of measurement results into inspection software or spreadsheets, cutting administrative time. The non-rotating measuring spindle reduces surface damage during contact with thread flanks and limits operator-induced variation, while the digital interface offers quick switching between display modes. These features support a smoother inspection process and faster throughput in busy metrology benches. Designed for fine-thread applications and compact parts Classified within the micro range for micrometres (measurement range 0–25 mm), the instrument is optimised for small, high-precision components such as fasteners, inserts and micro-engineered parts. The supplied set of 6 anvils (0.4–7 mm, metric 60) extends the micrometre’s applicability across different thread sizes without compromising alignment. For workshops that prioritise compact tools with minimal handling error, this design balances reach and stiffness for dependable single-handed operation. Documentation, accessories and practical benefits Delivery includes calibrated hardware and a certificate confirming ISO 17025 conformity, enabling immediate use within accredited processes. The combination of tactile controls, a high-contrast touchscreen and straightforward data export supports rapid staff training and reduces the risk of transcription errors. Together, these aspects enhance process efficiency and support consistent product quality across batches without sacrificing measurement integrity. Contact Metav Werkzeuge today to discuss how this Microtech Metrology thread micrometre (SKU 110710258) fits into existing inspection routines or to arrange purchase and delivery from Emmerich. Technical data Article number: 110710258 GTIN: 4061905456671 Manufacturer: Microtech Metrology Type: Metric 60 Facts Measurement range: 0–25 mm Accuracy: ±0.003 mm Readout / resolution: 0.0001 mm Display: Colour 2.4" touchscreen Data output: Wireless+USB Special features Digital instrument for thread measurement Non-rotating measuring spindle Includes 6 anvils 0.4–7 mm (metric 60) Supplied calibrated to ISO 17025 with certificate FAQ What measurement range does the instrument cover? The thread micrometre covers a measurement range of 0–25 mm, suitable for micro-range thread inspection. Is the device delivered with calibration documentation? Yes, the instrument is supplied calibrated to ISO 17025 and includes the calibration certificate for traceability. How are results transferred from the instrument? Measurement data can be exported via Wireless and USB interfaces for integration into inspection records or quality software. Which threads can be measured with the included accessories? The set includes six anvils (0.4–7 mm, metric 60) to accommodate a range of metric thread sizes typical for small fasteners. Does the spindle rotate during measurement? The micrometre features a non-rotating measuring spindle to minimise surface damage and reduce operator-related variation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Thread Micrometer Without Setting Gauge, Non‑Rotating Spindle 6.5mm, Analog 0.008mm Accuracy, Supplied In Case - Metav IndustryLine
Take advantage of a compact 0–25 mm thread micrometer that combines high precision (±0.008 mm) with a non-rotating measuring spindle for repeatable readings; the instrument is supplied in a protective case for secure transport. Order the device directly via Metav Werkzeuge or consult the team for specification advice. Thread micrometer 0–25 mm — analogue precision instrument by Metav IndustryLine The thread micrometer 0–25 mm (without setting gauge) is an analogue measuring tool designed for precise external thread measurement in workshop and inspection routines. Thread micrometer 0–25 mm range High accuracy ±0.008 mm Non-rotating measuring spindle Delivered in protective case Precision where small tolerances matter This analogue thread micrometer is tailored for tasks that require consistent, repeatable results at small dimensions. With a measuring range of 0–25 mm and an accuracy of ±0.008 mm, the device supports quality control steps where deviations must be minimised. The combination of a mechanical scale with a fine vernier-style reading (resolution 0.01 mm) allows familiar handling for technicians while providing the numerical precision needed for pass/fail decisions. The non-rotating measuring spindle reduces measurement error due to spindle rotation and ensures that axial displacement, not spindle twist, determines the reading — a practical advantage in serial inspection. Built for reliable workshop inspection and easy handling Designed in the micro measurement class, this instrument balances reach and stiffness for small components: the micro range classification (suitable for fine mechanical and watchmaking tasks as well as general workshop thread checks) ensures the short jaws remain torsion-resistant. At around 0.5 kg, the tool is comfortable for single-handed use while still offering robust feel on the bench. The instrument’s 6.5 mm measuring spindle and measured contact faces provide stable support for external thread profiles, enabling quick, reproducible checks during set-up or routine incoming inspection; this reduces machine downtime and speeds control loops. Practical delivery and maintenance advantages The micrometer is supplied in a protective case, which simplifies transport and protects the instrument from shocks and contamination. Mechanical construction means straightforward maintenance: occasional cleaning and light lubrication keep the movement smooth, and the vernier readout requires no batteries. For calibration policy, this item is delivered without an ISO 17025 calibration certificate; calibration can be arranged if a traceable certificate is required for internal quality systems. The product’s compact footprint, reliable mechanical design and clear analogue readout make it a pragmatic choice for workshops that prioritise durable, low-maintenance metrology. Choose Metav IndustryLine when reproducible thread measurement is required — order the Thread micrometer 0–25 mm (SKU M309.091) through Metav Werkzeuge for dependable delivery and specification support. Technical Data Article number: M309.091 GTIN: 4054469118093 Tariff number: 90173000 Facts Measuring range: 0–25 mm Accuracy: ±0.008 mm Resolution (reading): 0.01 mm Measuring spindle diameter: 6.5 mm Weight: 0.5 kg Special features Analogue vernier readout Non-rotating measuring spindle Protective case for delivery Measuring face diameter: 5 mm FAQ What accuracy can be expected from this instrument? The Thread micrometer 0–25 mm (Metav IndustryLine, SKU M309.091) offers an accuracy of ±0.008 mm, with a vernier-style resolution of 0.01 mm suited to precise workshop checks. Is this micrometer suitable for standard workshop use? Yes — the instrument’s micro-range design and robust mechanical construction make it suitable for everyday thread inspection and set-up tasks in metalworking and assembly environments. Does the product come with an ISO 17025 calibration certificate? No — the device is supplied without an ISO 17025 calibration certificate. If a traceable calibration report is required, external certification services can be arranged separately. How is the measurement read and how to avoid reading errors? Measurement is read from the analogue scale with a vernier readout; consistent contact force and the non-rotating spindle reduce user-induced variance and support repeatable readings. What types of threads can be measured with this micrometer? The micrometer is intended for external thread measurement and is suitable for common thread profiles encountered in workshop and inspection operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Thread Setting Gauge 55° For Thread Micrometer, 60° Option - Metav IndustryLine
Take advantage of a compact 25 mm reference that combines 55° Whitworth compatibility with a robust workshop fitment to simplify thread-micrometer checks and speed routine verification. Order or request advice directly via Metav Werkzeuge for fast specification support and supply from Emmerich. Setting gauge 25 mm for thread micrometer, 55° — Metav IndustryLine A setting gauge 25 mm for thread micrometer designed as a compact reference standard for verifying thread-micrometer measuring inserts and quick calibration checks in the inspection bench or workshop. Setting gauge 25 mm for thread micrometers Compatible with 55° Whitworth and 60° inserts Precision reference for fast calibration Precision reference that shortens inspection cycles The 25 mm setting gauge serves as a stable, repeatable reference when verifying the functional condition of thread micrometers and their inserts. By providing a defined contact geometry, the gauge reduces uncertainty during routine checks and supports faster decision-making on wear or recalibration needs. The clear 55° geometry makes it straightforward to identify Whitworth-style inserts, while the compact design keeps handling fast and ergonomic on the inspection bench. This rational approach optimises throughput without compromising measurement quality. Dual-angle compatibility for diverse thread standards Designed with the workshop that handles both Whitworth and metric thread inserts in mind, the accessory features the specified 55° angle for Whitworth applications and notes the alternative 60° form used by many metric inserts. This dual-angle reference ensures compatibility across common thread‑micrometer setups and simplifies stockkeeping by reducing the number of separate master gauges required. The feature supports consistent pass/fail assessment of insert seating and tip shape, contributing to reliable measurement results across mixed-production environments. Compact, robust accessory for everyday metrology tasks Built for regular use at the inspection station, the gauge is a lightweight physical standard that integrates into calibration routines and quick functional tests. Its small footprint preserves bench space while offering a tactile reference that is quicker to apply than full calibration rigs for frequent checks. The component functions as an efficient workshop tool that supports traceable procedures and reduces downtime by flagging insert wear early, helping to maintain process stability and product quality in the production chain. Contact Metav Werkzeuge for a technical consultation or to confirm the correct angle for specific insert types; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for rapid supply from Emmerich. Technical Data Article number: M309.091.0 GTIN: 4054469118109 Manufacturer: Metav IndustryLine Facts Setting size: 25 mm Angle: 55° Weight: 0.1 kg Tariff number: 90173000 ECLASS: 21170102 Special features 60° option for metric thread inserts or 55° for Whitworth inserts Accessory for thread micrometers Compact calibration reference for workshop and inspection bench Lightweight precision gauge Intended for routine verification and quick functional checks FAQ What is the primary purpose of this gauge? The setting gauge M309.091.0 is a compact reference used to verify and check the functional condition of thread micrometers and their measuring inserts. Which thread angles does the gauge support? The gauge supplies a 55° geometry for Whitworth-style inserts and is compatible with a 60° form commonly associated with metric thread inserts. Is this gauge suitable for routine workshop checks? Yes; the lightweight, compact design is intended for quick verification and routine functional checks at the inspection bench or in the workshop. What is the nominal setting size? The nominal setting dimension is 25 mm, providing a standard reference length for thread-micrometer checks. What are the identifying codes for ordering or documentation? Article number / SKU: M309.091.0; GTIN: 4054469118109; Manufacturer: Metav IndustryLine Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Tolerance Bore Caliper Digital Fine-Indicator, Colour Display IP54 - Filetta
Take advantage of the combination of a digital tolerance display, 0.005 mm accuracy and robust IP54 protection for reliable small-part inspection; the rechargeable lithium battery and supplied protective case keep the instrument ready for everyday workshop use. Order the item directly via Metav Werkzeuge or ask the consultants for application advice. MS910.502 Tolerance Micrometer — Digital fine indicator, IP54 (Filetta) The MS910.502 tolerance micrometer is a compact digital micrometer intended for precision inspection and workshop quality control on small components. Digital colour display with tolerance function High precision: 0.005 mm accuracy Rechargeable lithium battery included Delivered in protective case Precision and reproducibility for small-part inspection The MS910.502 delivers high repeatability for fine mechanical and inspection tasks through a 0.005 mm accuracy and a display resolution of 0.001 mm, providing a measurable improvement over standard analogue instruments. Classified in the micro category (measuring range up to 100 mm), this micrometer is optimised for work on delicate parts where minimal deformation and consistent contact force matter. The defined measuring force of 5–10 N reduces operator-induced variation and contributes to more reproducible readings when checking diameters, thicknesses and critical tolerances. Robust build and environmental protection for the workshop Built to withstand everyday shop conditions, the instrument features an IP54 protection rating, which guards internal electronics against dust ingress and water splashes. The measuring faces (Ø6.5 mm) are suitable for a wide range of small-geometry checks and the housing and spindle mechanisms are conceived for frequent handling. Supplied in a protective case, the micrometer is ready for secure storage and transport between inspection stations without exposure to contaminant build-up. Digital functionality that accelerates quality control A colour display with tolerance function enables immediate pass/fail assessment, reducing interpretation time during batch inspections. The instrument supports mm/inch switching and an easy On/Off control, while the rechargeable lithium battery avoids repeated disposable battery changes and keeps downtime to a minimum. Numeric readout at 0.001 mm resolution makes results directly comparable to digital calipers and measurement records, simplifying documentation and process control in production environments. Practical handling and application advantages Ergonomic fine adjustment and a compact frame make the micrometer simple to operate with one hand, while the defined measurement force helps to prevent over-tightening and part distortion. The combination of digital tolerance signalling and robust protection makes this tool suitable for workshop quality assurance, toolmaking and small-series production where fast, reliable decisions on conformity are required. For operations that demand repeatable small-part checks, this instrument represents a pragmatic balance of precision, durability and ease of use. For precise small-part tolerance checks and ordering, contact Metav Werkzeuge in Emmerich for expert advice and supply: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; eMail info@metav-werkzeuge.com; Tel +49 2822 7131930 Technical Data Article number: MS910.502 Manufacturer: Filetta Category: Messschrauben Facts Measuring range: 0–25 mm Resolution: 0.001 mm Accuracy: 0.005 mm Measuring faces diameter: Ø6.5 mm Measuring force: 5–10 N Special features Colour display with tolerance function Digital display with mm/inch and On/Off Rechargeable lithium battery IP54 protection rating Supplied in protective case FAQ What measuring range does the instrument cover? The MS910.502 covers a measuring range of 0–25 mm for small-part inspection. What resolution and accuracy are specified? Resolution is 0.001 mm and accuracy is 0.005 mm for the MS910.502 tolerance micrometer. Which display and modes are available? The micrometer features a colour display with a tolerance function and supports mm/inch switching and On/Off control. Is the instrument protected against dust and water? Yes, the instrument has an IP54 rating for protection against dust and splashes. How is the tool supplied for transport and storage? The MS910.502 is supplied in a protective case suitable for workshop transport and secure storage. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
25mm Tolerance Bore Micrometer With Digital Fine-Scale Readout, Bluetooth, IP54, Rechargeable Battery - Filetta
Take advantage of high measurement fidelity and modern connectivity: a compact micrometer offering ±0.002 mm accuracy together with Bluetooth data output and a rechargeable lithium battery ensures reliable, traceable results and efficient data capture — order the instrument directly via Metav Werkzeuge or ask the consultants for specification support. MS910.506 Tolerance Micrometer with digital fine indicator (IP54) and Bluetooth by Filetta MS910.506 is a precision tolerance micrometer designed for fine mechanical and shop-floor measurement tasks, combining a 0–25 mm measuring range with a sealed digital indicator and wireless data transfer. Bluetooth data output for digital logging IP54 dust and splash protection High accuracy ±0.002 mm resolution Rechargeable lithium battery and protective case Precision that suits fine mechanics and quality control The instrument is classified as a Micro‑range micrometer due to its 0–25 mm span, which is ideal where compactness and stiffness are required for repeatable readings. The instrument delivers a specified accuracy of ±0.002 mm, making it suitable for tasks that demand tight tolerances in component inspection and assembly. The Ø6.5 mm measuring faces and a controlled measuring force of 5–10 N minimise deformation of soft workpieces and support reproducible contact conditions, while the 15 mm throat depth enables access to shallow features without compromising stability. Streamlined digital workflow and traceable results Equipped with a sealed digital indicator that switches between mm/inch and an On/Off function, the micrometer supports straightforward readings and flexibility across documentation standards. The integrated Bluetooth data output simplifies transfer of measurement values into inspection software or spreadsheets, reducing manual transcription and accelerating quality checks. A rechargeable lithium battery removes frequent battery replacement, while the fine indicator assists in rapid, confident reading during routine checks. Robust design for busy production environments With IP54 protection, the device resists dust ingress and splash exposure typical at the workshop bench, which extends service life compared with non‑sealed instruments. The instrument is supplied in a protective case for transport and safe storage, helping to preserve the measuring faces and electronic unit during handling. The construction supports repeatable operation under normal industrial conditions, reducing downtime and ensuring measurement continuity across shifts. Practical handling and application range The digital fine indicator offers clear resolution to match the micrometer’s precision class, and the compact frame supports controlled single‑hand operation in many inspection scenarios. Typical application areas include precision fitting, small‑part inspection and component verification in machining and toolmaking. The combination of digital readout, wireless output and workshop‑grade protection makes this instrument an effective tool for standardised quality procedures and documented measurement routines. For detailed compatibility advice or to secure a supply of the Filetta MS910.506 tolerance micrometer, contact Metav Werkzeuge — Metav’s specialists in Emmerich can advise on integration into existing inspection workflows and arrange delivery; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: MS910.506 Manufacturer: Filetta Category: Micrometers / Messschrauben Product type: Tolerance micrometer with digital indicator Facts Measuring range: 0–25 mm Accuracy: ±0.002 mm Resolution (display): 0.001 mm Throat depth: 15 mm Measuring faces diameter: Ø6.5 mm Measuring force: 5–10 N Protection class: IP54 Special features Data output: Bluetooth Digital display: mm/inch, On/Off function Power supply: Lithium rechargeable battery Delivery: protective transport case Fine indicator for precise readings FAQ Is this micrometer suitable for very small precision parts such as watch components? The MS910.506 tolerance micrometer is a micro‑range instrument (0–25 mm) and offers ±0.002 mm accuracy, making it appropriate for fine mechanical work and small part inspection in precision workshops. Can measurement values be recorded automatically? Yes, the device provides Bluetooth data output so readings from the digital indicator can be transmitted directly to recording devices or inspection software for streamlined documentation. What is the resolution and how fine are the displayed increments? The digital display presents values to 0.001 mm resolution, matching the instrument’s fine indicator for clear, repeatable readings. Is the instrument protected against workshop conditions? The device has IP54 protection rating against dust and splashing, and it is supplied in a protective case to reduce the risk of damage during transport and storage. Does the micrometer include a battery and how is it powered? The instrument is powered by a rechargeable lithium battery, providing convenient operation without frequent battery replacement. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
25mm Tube Wall Micrometer With Microcomputer Colour Touchscreen Wireless+USB IP65 - Microtech Metrology
Take advantage of the combination of sub-micron measurement resolution, robust workshop protection and traceable calibration for reliable tube wall inspection. The unit’s 0.0001 mm (0.1 µm) resolution, Wireless and USB HID connectivity and ISO 17025 calibration certificate support efficient QC workflows. Order the tube wall thickness micrometre directly via Metav Werkzeuge or ask our consultants if needed. Tube Wall Thickness Micrometre – Microtech Metrology (0–25 mm, 0.1 µm resolution) The Tube Wall Thickness Micrometre is a microcomputer-controlled instrument for fast, high-resolution measurement of tube and pipe walls in workshop and production environments. Microcomputer with 0.1 µm resolution Wireless and USB HID data output IP65 protection for workshop use Supplied with ISO 17025 calibration Reduce scrap with repeatable sub-micron precision High-precision inspections become practical on the shop floor thanks to the 0.0001 mm (0.1 µm) resolution combined with an operational accuracy of ±0.002 mm. This degree of exactness narrows measurement scatter and reduces rework by identifying marginal wall thinning before it affects assembly or safety. The instrument’s friction ratchet and rotating spindle ensure a consistent measuring force and easy positioning, which stabilises repeat readings and lowers operator-induced variability. Capture measurement data directly into quality systems Integrated Wireless and USB HID output enables immediate transfer of readings to Windows, Android, iOS, macOS and Linux applications without additional converters, simplifying documentation and statistical process control. The 2.4" colour touchscreen provides a clear digital readout and intuitive menus to store or transmit values, accelerating batch inspections and reducing administrative effort. Data-ready transfer shortens the loop between measurement and corrective action, delivering measurable productivity gains in routine inspection tasks. Built for everyday workshop conditions Designed for industrial use, the instrument meets IP65 protection, making it resistant to dust and splash water commonly encountered in manufacturing areas. The compact 0–25 mm measuring range places the tool in the micro class, ideal for fine mechanical work and precise tube wall checks where reach is limited but stiffness and handling matter. The robust build and user-oriented controls make it suitable for both bench use and mobile inspection rounds. Traceable calibration and dependable sourcing Delivered with an ISO 17025 calibration certificate (Ilac MRA), the micrometre carries internationally recognised traceability for laboratory and production quality systems. This formal calibration supports audit trails and acceptance in regulated environments. Sourcing through Metav ensures a European quality filter and local logistics, combining specialist availability with committed after-sales guidance. Contact Metav Werkzeuge for specification advice, calibration documentation and supply options for the Microtech Metrology tube wall thickness micrometre – expert help is available from Emmerich. Technical Data SKU: 110350258 GTIN: 4061905040849 Manufacturer: Microtech Metrology Category: Micrometres / Measuring instruments Facts Measurement range: 0–25 mm Resolution: 0.0001 mm (0.1 µm) Accuracy: ±0.002 mm Display: 2.4" colour touchscreen Protection rating: IP65 Special features Wireless and USB HID data output Supplied with ISO 17025 calibration certificate (Ilac MRA) Friction ratchet for consistent measuring force Rotating measuring spindle for easier positioning Computerised micrometre with microcontroller operation Compatible with Windows, Android, iOS, macOS, Linux FAQ What measurement range does the micrometre cover? The micrometre measures from 0–25 mm, making it suitable for small-diameter tubes and precision wall-thickness checks. How fine is the resolution and what accuracy can be expected? Resolution is 0.0001 mm (0.1 µm) and the instrument achieves an accuracy of ±0.002 mm, suitable for high-precision inspection tasks. Is the instrument delivered calibrated? Yes, the micrometre is supplied with an ISO 17025 calibration certificate, ensuring traceability and acceptance in audited quality systems. Which data interfaces are available for integration? Measurements can be transferred via Wireless and USB HID, compatible with common operating systems and measurement software. Is the device suitable for workshop use? The unit has an IP65 rating and a robust design, providing resistance to dust and splashes typically encountered in production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Tube Wall Micrometer With Pin Anvils, 0.01mm Graduation, Ball Measuring Faces, Ratchet, Plastic Case - Metav IndustryLine
Compact, high-resolution micrometer for tube-wall thickness checks with 0–25 mm range and 0.01 mm reading; carbide measuring faces and a ratchet stop deliver reproducible contact force and long service life. Order directly via Metav Werkzeuge or consult our specialists for application advice. M309.043 Tube‑wall micrometer, 0–25 mm, 0.01 mm resolution (Metav IndustryLine) The M309.043 is a precision micrometer engineered for reliable measurement of tube and pipe wall thickness in workshop and light industrial environments. 0–25 mm range, 0.01 mm reading Carbide measuring faces for high wear resistance Ratchet stop ensures repeatable measuring force Spherical faces suited to ring and tube surfaces Reproducible measurements for process control This mechanical micrometer provides a fine 0.01 mm reading and a declared measurement accuracy of ±0.004 mm, enabling consistent results when checking tube wall thicknesses. The integrated ratchet stop controls the contact force so that each measurement is taken with the same applied pressure; this reduces operator‑related variation and supports traceable quality checks in serial inspections. The instrument’s carbide measuring faces combine wear resistance with dimensional stability, which helps keep maintenance intervals long and replacement costs low. Designed for tubular geometries and workshop handling Spherical measuring faces (ball‑to‑ball) give a reliable contact geometry for rounded workpieces, making the micrometer particularly suitable for measuring thin tube walls from about 1.8 mm thickness. The matt‑chrome measuring drum and painted frame improve readability and resist workshop wear. The mechanical construction and robust finish prioritise longevity and ease of use in routine environments; the unit is an industrial‑grade tool that performs repeatable thickness checks without relying on electronic components. Simple operation and service advantages Operation follows conventional micrometer practice: a spindle with a clear scale and a ratchet mechanism for controlled closure. The analogue design removes dependence on batteries and electronic calibration drift, while the chrome finish aids legibility. For maintenance, the carbide faces reduce the need for frequent regrinding, and the solid frame resists deformation under normal workshop loads. Where documentation or traceability is required, the instrument can be integrated into regular inspection routines to support consistent production tolerances. For precision tube‑wall inspection, request a technical consultation from Metav Werkzeuge — specialists for Metav IndustryLine measuring tools based in Emmerich who can advise on suitability and delivery options. Technical data Article number: M309.043 GTIN: 4054469117690 Category: Messschrauben (micrometers) ECLASS: 27200302 ETIM: EC003590 Tariff number: 90173000 Key figures Measuring range: 0–25 mm Resolution / reading: 0.01 mm Specified accuracy: ±0.004 mm Type: mechanical micrometer (analogue) Materials & features Frame: painted finish Measuring drum: matt chrome plated Measuring faces: spherical / spherical Carbide measuring faces for wear resistance Ratchet stop for reproducible contact force Suitable application: tube wall thickness measurement from 1.8 mm Weight: data varied between sources (not stated) FAQ What measurement range does the M309.043 cover? The M309.043 covers a measuring range of 0–25 mm, suitable for tube‑wall checks and small components. How fine is the reading and what accuracy can be expected? This micrometer offers a 0.01 mm reading and a specified accuracy of ±0.004 mm, supporting reliable routine measurements. Are the measuring faces hard and wear‑resistant? Yes, the tool is equipped with carbide measuring faces, which increase service life and maintain dimensional stability under frequent use. Is the M309.043 suitable for measuring thin tubes? The instrument is intended for tube‑wall thicknesses from approximately 1.8 mm and above, with spherical faces that improve contact on rounded profiles. Does the micrometer require batteries or electronics for operation? No; the M309.043 is an analogue micrometer with a mechanical drum and ratchet, avoiding dependence on batteries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Tube Wall Micrometer With Spherical Anvil, 0.01mm Graduation, Ratchet, In Case - Metav IndustryLine
Take advantage of precise pipe‑wall measurement in a compact format: the combination of a 0–25 mm measuring range with a ball anvil and a 0.01 mm graduation ensures accurate contact on curved surfaces and clear readout for quality checks. The hardened measuring faces and ratchet stop provide repeatable results and protect the spindle, so production sampling and inspection cycles remain consistent. Order the micrometre directly via Metav Werkzeuge or ask the consultants for application advice. M309.044 Micrometre Screw Gauge — Pipe‑wall measure 0–25 mm, 0.01 mm graduation (Metav IndustryLine) M309.044 is a precision micrometre designed to measure pipe wall thickness up to 25 mm, combining a ball‑shaped anvil for secure contact on curved parts with a matt‑chrome thimble for easy reading Precision 0.01 mm graduation Ball anvil for curved surfaces Ratchet stop for consistent measuring force Hardened measuring faces and matt chrome thimble Consistent accuracy for curved workpieces A micrometre built specifically for pipe and tubular inspection reduces the uncertainty that comes from measuring rounded geometries. The ball anvil contacts the workpiece with a defined surface geometry, so contact points remain stable even on small radii; coupled with the ratchet stop, the applied measuring force is controlled, reducing operator‑induced variation. The instrument’s graduation of 0.01 mm and the documented accuracy ±0.004 mm make it suitable for routine quality checks where reproducible values are required rather than only rough estimates. This saves time at the inspection bench and supports fast pass/fail decisions. Repeatable handling that speeds up inspection cycles Ergonomics and repeatability are decisive in busy workshops. The micrometre’s ratchet mechanism ensures the same final spindle travel each time, which reduces rework and improves throughput on batch inspections. The lacquered frame offers good grip and thermal stability compared with bare metal finishes, while the matt‑chrome thimble improves contrast for quicker readings. Together these features provide a measurable productivity gain: fewer measurement repeats and shorter cycle times for standardised quality control routines. Robust finish and workshop readiness Designed for practical use, the measuring faces are hardened to resist wear from repeated contact, extending service life and preserving calibration. The frame is lacquered and the measuring drum is matt‑chrome plated, protecting key surfaces from corrosion and shop contamination. Delivery includes a protective case for safe transport and storage, so the instrument arrives ready for use on the shop floor or in the inspection room. For applications that routinely inspect pipe wall thickness from 4.7 mm, the construction and contact geometry conserve accuracy across many measurements. For precise pipe‑wall verification choose the Metav IndustryLine M309.044 micrometre and contact Metav Werkzeuge in Emmerich for tailored advice by e‑mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M309.044 GTIN: 4054469117706 Category: Micrometre screw gauges (Messschrauben) eCl@ss: 27200302 ETIM: EC003590 Customs tariff number: 90173000 Numbers / Core technical data Measurement range: 0–25 mm Resolution / graduation: 0.01 mm Stated accuracy: ±0.004 mm Suitable for pipe wall thickness from 4.7 mm Mechanical type: analogue, ratchet stop included Special features / Design Ball‑shaped anvil for measurement on curved surfaces Hardened measuring faces Frame lacquered and measuring drum matt‑chrome plated Delivered in protective case for transport and storage FAQ How fine is the reading on this micrometre and what accuracy can be expected? The micrometre M309.044 provides a 0.01 mm graduation and a stated accuracy of ±0.004 mm, making it suitable for precise, repeatable checks in workshop inspection. Is the gauge suitable for measuring pipe or tube walls? Yes, the M309.044 is specifically designed for pipe‑wall measurement and is suitable for wall thicknesses from 4.7 mm upwards, thanks to its ball anvil contact geometry. Does the instrument include any features to ensure repeatable force during measurement? The M309.044 includes a ratchet stop, which standardises the final spindle travel and reduces operator‑induced variation for consistent results. What surface finishes and protections does the tool have for workshop use? The gauge has a lacquered frame, a matt‑chrome measuring drum and hardened measuring faces to resist wear and contamination in industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Tube Wall Thickness Micrometer Digital IP65, Friction Thimble, ISO 17025 Cal Cert - Microtech Metrology
Take advantage of the combination of traceable ISO 17025 calibration, shop‑floor protection (IP65) and a fine ±0.003 mm accuracy for dependable tube‑wall measurements; order directly via Metav Werkzeuge or consult our specialists for integration advice. CertiMet TUBE Tube Wall Thickness Micrometer (0–25 mm, IP65) by Microtech Metrology The CertiMet TUBE Tube Wall Thickness Micrometer is a digital measuring instrument designed for rapid, repeatable measurement of tube wall thicknesses in production and inspection environments. IP65 protected aluminium housing Calibration certificate ISO 17025 included High accuracy ±0.003 mm resolution Friction thimble for reproducible force Traceable precision that strengthens quality control The micrometer delivers traceable results thanks to an included ISO 17025 calibration certificate, making it suitable for documented quality procedures and laboratory acceptance. With a measurement range of 0–25 mm, a reading resolution of 0.001 mm and an accuracy of ±0.003 mm, this digital instrument supports narrow tolerances and reduces uncertainty in routine checks. The combination of high resolution and low measurement uncertainty helps to avoid costly rework and supports process capability assessments in serial production. Robust design for regular shop‑floor use Built with an aluminium housing and an IP65 rating, the device withstands dust and water jets common on manufacturing floors while remaining lightweight for frequent handling. The integrated friction thimble ensures a reproducible measuring force, improving repeatability between operators, and the rotating measurement spindle facilitates access to awkward tube geometries. The digital head offers mm/inch, origin and hold functions that simplify reading and temporary data capture during fast inspection cycles. Custom tube anvils are available on request to match special profiles. Practical advantages in production and inspection workflows Engineered for tube and pipe applications, the micrometer is suited to measuring tube wall thicknesses from 4.7 mm upwards and adapts to common workshop tasks such as incoming goods inspection, welding inspection and hydraulic line verification. The digital micrometer format speeds up measurement sequences and reduces transcription errors, while the calibration certificate provides documented confidence for audits. Overall, the instrument supports a streamlined inspection routine, combining durable construction with measurement performance tailored to industrial environments. For precise, certified tube‑wall measurement rely on Microtech Metrology’s CertiMet TUBE and contact Metav Werkzeuge in Emmerich for technical consultation and prompt supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 110350251 GTIN: 4061905039294 Manufacturer: Microtech Metrology Category: Micrometers (tube wall thickness) Facts Measurement range: 0–25 mm Resolution: 0.001 mm Accuracy: ±0.003 mm Protection rating: IP65 Calibration: ISO 17025 certificate included Special features Digital readout with mm/inch, origin and hold Friction thimble for reproducible measuring force Aluminium housing Rotating measurement spindle Suitable for tube wall thicknesses from 4.7 mm FAQ Is the instrument delivered calibrated? Yes. The CertiMet TUBE is delivered with a calibration certificate issued to ISO 17025, ensuring traceability and documented accuracy. What are the range and accuracy of the micrometer? The micrometer covers 0–25 mm with a resolution of 0.001 mm and an accuracy of ±0.003 mm, suitable for demanding inspection tasks. Can the device be used on a production shop floor? Its IP65 protection and aluminium housing make the micrometer robust for shop‑floor environments while remaining portable for routine checks. Is it suitable for measuring thin‑walled tubes? Yes; the device is specified for tube wall thicknesses from 4.7 mm and can be fitted with a custom anvil for special profiles. Are custom anvils available for specific tube profiles? Custom tube anvils can be supplied on request to match non‑standard diameters and profiles for precise contact during measurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
25mm Universal Bore Gauge With Seven Interchangeable Anvils, Colour 2.4" Touchscreen, IP65, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable precision, robust workshop protection and modern data connectivity: the micrometer’s 0–25 mm range with 0.003 mm accuracy and ISO 17025 calibration certificate ensures reliable measurements and faster quality decisions. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Universal micrometer — 0–25 mm range, 0.003 mm accuracy (Microtech Metrology) The Universal micrometer is a compact, calibrated outside micrometer designed for high-precision external measurements in fine mechanics and workshop quality control. 0–25 mm measuring range 0.003 mm accuracy Colour 2.4" touchscreen display Wireless + USB data output Faster quality decisions with traceable accuracy A measured uncertainty of 0.003 mm allows decisive pass/fail judgements in production sampling without lengthy cross-checks. The device is supplied fully calibrated to ISO 17025, which means an accredited laboratory has verified the measurement chain and a calibration certificate is supplied with the instrument. This traceability reduces rework and documentation time: instead of repeated manual logging, accepted readings can be referenced against the certificate during audits. The high display resolution coupled with the proven mechanical design shortens inspection cycles and supports consistent quality control. Built for the workshop: durability and ergonomic handling Designed to withstand harsh environments, the instrument carries an IP65 ingress protection rating, keeping dust and coolant sprays away from sensitive electronics. The non-rotating spindle minimises wear on measured surfaces and improves repeatability when contacting delicate parts. Seven pairs of measuring inserts are included, extending the device’s applicability to stepped and irregular profiles without the need for immediate accessory purchases. Classified in the Micro bracket (maximum measuring range typically 10–100 mm), this compact format prioritises stiffness and tactile control, ideal for fine mechanical assemblies where short jaws and low distortion are advantageous. Data-ready measurements for modern workflows Measurement results are exportable via Wireless + USB, enabling direct transfer into inspection software or production databases and eliminating transcription errors. The Colour 2.4" touchscreen offers a clear numeric display and simple menu navigation for storing and reviewing readings on the instrument before export. Together, modern data output and an intuitive interface allow the tool to slot into digital quality processes, accelerating traceability and providing reliable electronic records for audits and traceable documentation. Contact Metav Werkzeuge in Emmerich for tailored advice and to secure a calibrated Universal micrometer from Microtech Metrology with traceable certification. Technical Data Article number: 110750258 GTIN: 4061905039256 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 0–25 mm Resolution (display): 0.0001 mm Accuracy: 0.003 mm IP protection: IP65 Special features Colour 2.4" touchscreen Wireless + USB data output Delivered with 7 pairs measuring inserts Non-rotating spindle design Supplied with ISO 17025 calibration certificate Digital device (electronic readout) FAQ Is the micrometer delivered fully calibrated? Yes. The Universal micrometer is supplied fully calibrated to ISO 17025 and includes a calibration certificate that documents traceability and measurement uncertainty. What measuring tasks suit this instrument best? The micrometer is optimised for precise external measurements of small components, fine mechanical parts and standard workshop quality control tasks within its 0–25 mm range. How are readings transferred to a PC or inspection system? Measurement data can be exported from the instrument via Wireless + USB, allowing direct integration with inspection software and digital record-keeping. Can the micrometer withstand shop-floor conditions? Yes. With an IP65 rating and a robust mechanical design — including a non-rotating spindle — the micrometer resists dust and coolant jets common in workshop environments. Which accessories are included? The delivery contains seven pairs of measuring inserts to cover a variety of contact geometries and profiles without immediate additional purchases. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision micrometers built for repeatable accuracy
Micrometers—also referred to as micrometer screw gauges or micrometer callipers—are compact, robust instruments for fast, highly accurate length measurement of small to medium workpieces. Designed for routine use on the shop floor, these tools combine mechanical reliability with options for digital data capture, making them indispensable where repeatable tolerances matter.
How micrometers work and where they belong in production
Micrometers operate on a finely threaded spindle that brings two measuring faces into alignment with the workpiece; many designs follow the Abbe comparator principle so that the measuring axis and scale are collinear, reducing tilting errors. Typical outside micrometers (bühlermessschrauben) provide readings down to 1/1000 mm (0.001 mm) in analogue form; internal micrometers and specialised two- or three-point gauges enable accurate diameter and bore measurements, while depth micrometers cover depths from 0–300 mm. Hardened carbide (HM) measuring faces are standard to prevent wear and maintain accuracy over time. Digital variants offer easy reading, unit switching (mm/inch) and data output via USB, RS interface or Bluetooth; advanced models with an integrated minicomputer support Go/NoGo checks, temperature compensation and wireless transmission up to 50 m.
Practical benefits that improve shop‑floor performance
- Reduced rework and higher first-pass yield thanks to repeatable accuracy and carbide-tipped measuring faces.
- Faster, safer measurement cycles by using the ratchet/coupling to limit measuring force to 5 N to 10 N, protecting both part and instrument.
- Flexible inspection workflows with analogue, digital and minicomputer options, including wireless data transfer and mm/inch toggle.
- Versatile coverage with outside, internal, depth and built-in micrometers offering measuring ranges from a few millimetres up to 300 mm and resolution down to 2 µm (internal) or 0.003 mm (standard depth micrometers).
- Durable operation in workshop environments: mechanical models resist dust and moisture, while digital versions are available with IP54 protection.
Metav — a precision partner you can rely on
Metav combines decades of technical expertise with a broad, quality-filtered product range from its Emmerich hub. Over 48,000 customers trust Metav’s offer of more than 250,000 products, which simplifies procurement and secures reliable supply for industry, trade and specialist retailers. For buyers seeking micrometers with consistent performance and traceable data capture, Metav’s selection and technical support make it a practical, long-term choice.
In short
Micrometers provide robust, highly repeatable measurement for external, internal and depth applications, available in analogue, digital and minicomputer formats to match precision requirements and data‑management needs.
FAQ
How precise are micrometers for internal measurements?
Internal micrometers in the micrometers category can achieve accuracies around 2 µm when correctly used; digital and minicomputer models improve readout convenience and data integration for traceable inspection results.
When is a digital micrometer preferable to an analogue one?
Choose a digital micrometer when easy readout, unit conversion (mm/inch), or data transmission is required. Digital models with IP54 rating also offer dust and splash protection, while analogue micrometers remain the most robust option in harsh environments.
What measuring force should be used to ensure consistent results?
The recommended measuring force for micrometers is 5 N to 10 N. Use the ratchet or friction thimble to apply this consistent force and rely on the insulating sleeve to minimise heat transfer from the hand.
Can depth micrometers measure small bores and tight features?
Yes. Depth micrometers use a fine needle or flat measuring face and, with suitable extensions, cover narrow or deep features; standard depth micrometers typically span 0–300 mm with accuracies near 0.003 mm, while specialised digital systems offer even higher resolution.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com