High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
15x Triplet Loupe LED and UV-LED Illumination, Handheld Magnifier - Euromex
Take advantage of the combination of 15× optical clarity and dual LED/UV‑LED illumination for reliable defect detection and material verification. Order the loupe directly via Metav Werkzeuge or consult the team for suitability and delivery from Emmerich. Triplet loupe 15× with LED and UV‑LED illumination — handheld loupe by Euromex A Triplet loupe 15× with LED and UV‑LED illumination designed for detailed visual inspection and verification tasks in workshops, laboratories and quality-control stations Sharp 15× magnification with triplet lens Dual illumination: LED and UV‑LED light Compact handheld design for inspection Durable build from a reputable Euromex brand Faster, more reliable inspection with corrected optics The combination of a triplet lens and 15× magnification delivers a clear, corrected image with reduced chromatic aberration, which makes fine details easier to interpret during routine checks. Paired with bright LED illumination, features such as machining marks, surface defects and solder joints become visible without prolonged adjustment. The optical design translates into measurable time savings during repeated inspections and supports consistent decision‑making in production and repair workflows. Practical handling for repeated use and varied tasks A compact handheld magnifier offers straightforward positioning and quick transitions between parts, supporting an efficient inspection routine in busy environments. The compact construction is intended for handheld operation and bench use alike, facilitating fast checks on small components, labels or textiles. Trust in the Euromex pedigree ensures that the loupe remains a dependable instrument for repeated visual tasks, contributing to steady throughput and reduced rework. UV‑assisted checks expand detection capabilities The integrated UV‑LED illumination reveals features that remain hidden under visible light: fluorescent markers, certain inks, adhesives and surface contaminants can become apparent, aiding authentication and cleanliness checks. This targeted lighting expands the tool’s application from simple magnification to specialised quality‑control tasks, supporting precise inspection routines without complex equipment changes. Contact Metav Werkzeuge for product availability, technical advice and delivery information regarding the Euromex triplet loupe—call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability for specific inspection tasks Technical Data Article number: PB.5018-LUV Label: Triplet loupe 15x with LED and UV‑LED illumination Brand: Euromex Type: Loupe UID: PB.5018-LUV Facts Magnification: 15× Special features Lens type: Triplet lens Illumination: LED and UV‑LED Use: Visual inspection and material verification Form factor: Handheld loupe FAQ What level of magnification does this loupe provide? The Euromex triplet loupe delivers 15× magnification, suitable for detailed visual inspection of small components and surface features. How does the triplet lens benefit inspection tasks? A triplet lens reduces chromatic aberration and improves edge sharpness, so the loupe provides a clearer, more accurate view for precision inspection work. What is the purpose of the UV‑LED illumination? UV‑LED illumination highlights fluorescent inks, adhesives and contaminants that are not visible under standard lighting, extending the loupe’s use to authentication and cleanliness checks. Can the loupe be used in production quality control? Yes, the loupe’s combination of 15× magnification and LED/UV‑LED lighting makes it suitable for quick quality checks and verification tasks in production environments. Is this loupe suitable for jewellery and watchmaking inspection? The optical correction and compact handheld format make the instrument well suited to jewellery, watchmaking and similar detailed‑work applications. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
15x Triplet Magnifier With LED Illumination - Euromex
Available directly via Metav Werkzeuge, the compact triplet loupe combines 15× magnification and integrated LED lighting to speed up visual inspections and reduce rework; order processing and expert consultation are available from Metav's team in Emmerich if further guidance is required. Euromex Triplet Loupe 15× with LED illumination — handheld inspection loupe Euromex Triplet Loupe 15× with LED illumination offers a portable inspection solution for precise visual checks in workshops, laboratories and quality-control stations. Triplet optics for reduced chromatic aberration 15× magnification for fine detail Integrated LED for even illumination Compact, pocket-friendly inspection tool Greater defect detection through corrected optics and clear magnification The combination of triplet optics and 15× magnification delivers a noticeably sharp image, reducing common optical errors such as chromatic and spherical aberration. Where visual checks must detect micro-defects, the corrected lens group produces higher-contrast details that support faster and more reliable decision-making on the production line. This precision lens design translates directly into fewer false negatives during inspection and a reduced need for repeated handling, improving overall process efficiency. Consistent, shadow‑free lighting for repeatable inspection results An integrated LED illumination system provides uniform, cool light across the viewing field, helping to maintain consistent lighting from one inspection to the next. Stable illumination improves the visibility of surface texture and colour nuances, which is especially important in electronics assembly, jewellery appraisal and print quality checks. The built-in lighting eliminates dependence on external light sources, simplifying set-up and allowing immediate use at benches or on the move. Practical handling and application in workshop environments Designed as a handheld inspection lens, this loupe is a convenient tool for routine quality control and troubleshooting. The compact form permits easy storage in a tool pouch or bench drawer and encourages regular use during incoming or outgoing inspections. By integrating the loupe into standard inspection routines, teams gain quicker visual verification and a greater degree of confidence in routine measurements and assessments, fostering a calmer, more controlled work environment. Low-maintenance tool that supports operational productivity The simple construction requires minimal upkeep: periodic lens cleaning and careful storage preserve optical performance and avoid additional downtime. Because the device is easy to operate, little training is required, which reduces onboarding time for new staff and keeps inspection throughput steady. The loupe thereby contributes to an economical inspection workflow while maintaining the optical quality expected of a professional Euromex inspection tool. For product supply and tailored advice on this Euromex triplet loupe with 15× magnification and integrated LED lighting, contact Metav Werkzeuge in Emmerich for prompt support and workshop-oriented consultation. Technical data Article number: PB.5018-LED SKU: PB.5018-LED UID: PB.5018-LED Product type: Loupe Brand: Euromex Facts Magnification: 15× Illumination: LED Special features Triplet optical design Hand-held inspection loupe Portable, pocket-friendly format Suitable for visual inspection and quality control FAQ What magnification does the loupe provide? The Euromex triplet loupe delivers 15× magnification, enabling close inspection of fine details in components and materials. Does the loupe include lighting? Yes — the product comes with integrated LED lighting to ensure even illumination across the viewing field during inspections. Which tasks is this loupe suited for? The loupe is suitable for visual inspection, quality control and close examination tasks commonly found in electronics, jewellery, print inspection and small-part assembly. How should the lenses be maintained? Clean the lenses with a soft microfibre cloth and appropriate lens cleaner; store the loupe in a protective pouch to avoid scratches and dust accumulation. Is the loupe convenient for mobile inspections? Its compact, pocket-friendly design makes the loupe well suited for mobile checks and quick bench-side inspections. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
15x/12mm Widefield Eyepiece for bScope Microscopes, Ø30mm Tube - Euromex
Benefit from the combination of 15× magnification and a 12 mm field number for precise material and fluorescence observation; compatible with Ø 30 mm tubes for straightforward integration into existing bScope setups. Order this eyepiece directly via Metav Werkzeuge or contact the consultants for further technical advice. WF 15x/12 mm Eyepiece – Eyepiece for bScope with 15× Magnification and 12 mm Field Number (Euromex) A WF 15x/12 mm eyepiece designed for bScope material science and fluorescence microscopes with a 30 mm tube diameter, providing a wide field of view for efficient sample inspection Wide-field WF design for expanded view 15x high magnification for fine detail 12 mm field number for broad specimen coverage Compatible with Ø 30 mm microscope tubes Improved resolution for material and fluorescence analysis The 15× magnification delivers enhanced visual detail for tasks where fine structure resolution matters, such as metallographic inspection or fluorescence-labelled specimen examination. With higher magnification, smaller features are resolved more clearly, which reduces the need for repeated refocusing or frequent objective changes. The optical effect is focused on delivering actionable detail rather than mere enlargement, enabling concise comparison of microstructures and more reliable interpretation of contrast in fluorescence applications. Larger usable field for faster inspections and less fatigue A 12 mm field number in a wide-field design translates into a noticeably larger visible area at the chosen magnification, so fewer stage movements are required when scanning samples. This expanded field reduces observer fatigue and shortens inspection cycles in routine quality-control procedures. The wide-field ocular also improves alignment tolerance during image capture or visual documentation, helping to maintain consistent framing when switching between objectives or between brightfield and fluorescence modes. Reliable compatibility and straightforward integration with bScope systems Built for use with bScope material science and fluorescence models, the eyepiece fits microscopes with a Ø 30 mm tube and is intended to integrate seamlessly into laboratory workflows. The WF design preserves the eye relief needed for comfortable viewing over extended sessions, while the optical specifications are suited to both visual appraisal and comparably modest photodocumentation setups. As part of a modular bScope configuration, this eyepiece supports quick replacement and consistent optical performance across inspections. Contact Metav Werkzeuge today to discuss suitability for workshop or laboratory workflows and to request any additional technical data – eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: BS.6315 Product type: Eyepiece Manufacturer: Euromex Optical specifications Magnification: 15× Field number: 12 mm Tube compatibility: Ø 30 mm Features and compatibility Wide-field (WF) design Series: bScope Intended use: Material science, fluorescence models UID: BS.6315 FAQ What magnification does this eyepiece offer? The eyepiece provides 15× magnification, suitable for detailed visual inspection in material science and fluorescence applications. How large is the visible field with this eyepiece? With a 12 mm field number, the eyepiece gives a wide usable field at the specified magnification, reducing stage movements during sample scanning. Which tube diameter is required for fitting? The eyepiece is compatible with microscopes that have a Ø 30 mm tube, matching standard bScope fittings. Is this eyepiece suitable for fluorescence microscopy? Yes, the eyepiece is designed for bScope fluorescence models and supports visual observation of fluorescence-labelled specimens. What is the article number or SKU for ordering? The article number / SKU is BS.6315, listed under the bScope eyepiece range by Euromex. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
15x/16mm Wide Field Eyepiece 10/100 Micrometer Crosshair, 30mm Tube - Euromex
Precision observation and reliable measurement meet compact compatibility: the combination of 15× magnification, an integrated 10/100 micrometer, and a 16 mm wide-field delivers faster, repeatable inspections. Order the eyepiece directly via Metav Werkzeuge or ask our consultants if further clarification is required. WF 15x/16 mm eyepiece with 10/100 micrometer and crosshair for iScope (30 mm tube) — Euromex wide-field measurement eyepiece The WF 15x/16 mm eyepiece with 10/100 micrometer is a wide-field replacement eyepiece for iScope microscopes, optimised for precision measurement and visual inspection in laboratory and workshop environments Wide-field 16 mm field number 15× magnification for detailed imaging Integrated 10/100 micrometer scale 30 mm tube for iScope compatibility Faster, more accurate measurements through integrated micrometry An eyepiece with a built-in 10/100 micrometer provides a direct measurement scale in the viewing plane, enabling immediate linear readings without additional attachments. The 15× magnification increases apparent detail while the 16 mm field number preserves a broad area of view, which reduces repositioning and shortens inspection time. For routine dimensional checks and quick quality-control tasks, the combination of scale and magnification improves repeatability and helps standardise measurement procedures on the shop floor. Comfortable, wide-field viewing that improves inspection efficiency A wide-field (WF) optical design widens the apparent image circle, giving more context around the detail under inspection and easing eye strain during extended use. The incorporated crosshair reticle aids alignment and centre-finding, which is particularly useful when comparing features or centring components for measurements. By reducing the need for frequent refocusing and realignment, the eyepiece supports a steadier workflow and faster throughput in repetitive inspection tasks. Robust compatibility with iScope and practical workshop use The eyepiece is configured for a 30 mm tube, making it readily compatible with iScope microscope systems and facilitating straightforward replacement or upgrade. The optical specifications are tailored for inspection applications in small-batch production, maintenance benches and educational labs, where easy interchangeability and reliable optical performance are essential. The unit’s compact design keeps instrument ergonomics intact and avoids interference with existing focus and stage mechanisms. Practical advantages for metrology and quality control With the integrated scale and crosshair, this eyepiece is suited for quick comparative measurements and alignment checks without requiring digital readouts or additional accessories. The 15× magnification provides sufficient enlargement for most visual metrology tasks while avoiding excessive working-distance reduction. As a simple optical aid, it lowers tool complexity and maintenance needs, offering a cost-effective option for workshops that require dependable, repeatable visual measurement capability. Contact Metav Werkzeuge today to discuss suitability for specific inspection workflows or to request a tailored supply recommendation — Metav Werkzeuge can advise on integration with existing iScope setups and arrange delivery from Emmerich. Technical data Article number: IS.6215-CM Designation: WF 15x/16 mm eyepiece with 10/100 micrometer and crosshair for iScope, 30 mm tube Manufacturer: Euromex Product type: Eyepiece Series: iScope Core specifications Magnification: 15× Field number: 16 mm Tube diameter: 30 mm Micrometer scale: 10/100 division Features & compatibility Wide-field (WF) eyepiece design Integrated crosshair reticle Built-in 10/100 micrometer scale Compatible with iScope microscope series FAQ What magnification does the eyepiece provide? The eyepiece delivers 15× magnification, which balances detail visibility with a useful working distance for inspection tasks. Is the micrometer scale readable for quick measurements? Yes — the built-in 10/100 micrometer offers direct visual divisions for comparative and routine measurements without extra attachments. Can this eyepiece be used with any microscope? The eyepiece is configured for a 30 mm tube and is compatible with iScope systems; compatibility with other microscopes requires matching the tube diameter and optical requirements. Does the crosshair affect the viewing field for inspection? The integrated crosshair is intended to aid alignment and centring; it is unobtrusive in normal viewing and improves consistency during measurement tasks. Is this eyepiece suitable for precision metrology work? The eyepiece supports fast, repeatable visual measurements and alignment tasks; for high-accuracy dimensional metrology, pairing with calibrated reference standards or digital measuring equipment is recommended. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
16 mm 15× HWF Eyepiece Pair for NexiusZoom, Wide Field 16 mm - Euromex
Benefit from precise, wide-field observation and comfortable binocular use thanks to the combination of 15× magnification and a 16 mm field number; this makes routine inspections faster and less tiring. Order the NZ.6015 pair directly via Metav Werkzeuge or ask our consultants if needed. Pair of HWF eyepieces 15× / 16 mm for NexiusZoom by Euromex The pair of HWF eyepieces for NexiusZoom provides a wide, comfortable viewing field suited to inspection and laboratory applications. HWF wide-field optics for extensive field of view 15× magnification for detailed observation 16 mm field number for comfortable eyepoint Compatible with NexiusZoom and NexiusZoom ESD Faster, more accurate visual inspection through greater detail The NZ.6015 eyepiece pair combines 15× magnification with a 16 mm field number to deliver a noticeably larger apparent field and finer detail on each view. This optical combination reduces the frequency of stage adjustments during visual inspection and shortens measurement cycles, which improves throughput in repetitive tasks. The wide-field optics are designed to maintain image clarity across the full field, so small features remain readable at the edges; this supports reliable defect detection and sample appraisal in production and quality control environments. Comfortable observation that reduces fatigue in long sessions Designed as a pair of eyepieces, the HWF configuration prioritises user comfort during prolonged use. The broader field of view allows the eyes to take in more of the specimen without constant refocusing, which diminishes eye strain and supports consistent inspection quality across shifts. The binocular setup preserves natural stereoscopic balance for routine examination tasks, helping technicians maintain concentration and reduce the likelihood of missed details over extended sessions. Straightforward integration into existing workflows and microscopes These eyepieces are specified for use with NexiusZoom systems, including the NexiusZoom ESD series, making swap-in replacement and system upgrades straightforward. The Euromex design follows established mechanical and optical interfaces for simple fitting and predictable performance, minimising downtime when changing optical configurations. Corresponding accessories and alternative eyepiece options are available under related SKUs for users seeking different magnifications or field numbers to suit particular inspection tasks. Contact Metav Werkzeuge today for tailored advice on Euromex HWF eyepieces and to arrange supply from our Emmerich hub: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: NZ.6015 Label: Paar HWF-Okulare 15×/16 mm für NexiusZoom Manufacturer: Euromex Product type: Pair of eyepieces Eyepiece type: HWF Number of eyepieces: 2 Core specifications Magnification: 15× Field number: 16 mm Compatible series: NexiusZoom; NexiusZoom ESD Compatibility / Special features Wide-field optics design Intended for binocular NexiusZoom systems Cross-selling SKUs available: NZ.1902-A; NZ.1902-AP; NZ.1902-B; NZ.1902-B-ESD; NZ.1902-P; NZ.1902-P-ESD; NZ.1902-PG; NZ.1902-S; NZ.1902-S-ESD; NZ.1902-U; NZ.1902-U-ESD; NZ.1903-A; NZ.1903-AP; NZ.1903-B; NZ.1903-B-ESD; NZ.1903-M; NZ.1903-P; NZ.1903-P-ESD; NZ.1903-PG; NZ.1903-S; NZ.1903-S-ESD; NZ.1903-U; NZ.1903-U-ESD; NZ.5302; NZ.5303 FAQ Are these eyepieces compatible with NexiusZoom microscopes? Yes. The NZ.6015 pair of HWF eyepieces is specified for use with NexiusZoom and NexiusZoom ESD series microscopes and fits the standard eyepiece tubes used on those models. What does the 16 mm field number mean for everyday use? The 16 mm field number denotes the diameter of the usable image circle at the eyepiece and translates to a wider apparent field of view, which makes it easier to observe larger areas without moving the specimen. Can the NZ.6015 eyepieces be used for inspection and quality control tasks? Yes. The combination of 15× magnification and wide-field optics is well suited to inspection, routine visual quality checks and educational applications where detailed, comfortable observation is required. How many eyepieces are included and how are they mounted? The article is supplied as a pair of eyepieces (two pieces) designed for binocular use and mounts into the standard eyepiece holders of compatible NexiusZoom systems. Are alternative magnifications or eyepiece options available? Alternative eyepiece options and related accessories are listed under the related SKUs; consult the technical data or Metav Werkzeuge for recommendations tailored to specific inspection tasks. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 mm Widefield WF 15x Eyepiece, High-Field Optical View - Euromex
Benefit from precise 15× magnification, a generous 16 mm field of view and full compatibility with Achios inverted microscopes for consistent sample inspection; combine optical clarity and workflow efficiency for dependable results. Order the Widefield WF 15x/16 mm eyepiece directly via Metav Werkzeuge or ask our consultants if needed. Widefield WF 15x/16 mm eyepiece for Achios Inverted (Euromex) The Widefield WF eyepiece for Achios Inverted provides broad-field observation and high visual detail for inverted microscopy applications. Widefield optics for extended observation 15× magnification for detailed inspection Compatible with Achios inverted microscopes High-resolution detail without losing the overview The Widefield WF 15x/16 mm eyepiece delivers a balance between magnification and visual span: 15× magnification combined with a 16 mm field of view lets operators inspect fine structures while maintaining situational awareness across the sample. The widefield optics reduce the need for frequent refocusing during routine checks, which supports faster decision-making in quality control and research settings. This optical pairing is particularly useful where both detail and context are required simultaneously. Faster, more consistent inspection workflows A broad visual field and reliable magnification translate into measurable efficiency gains during repetitive inspection tasks. The ocular design allows technicians to complete visual passes faster, reducing fatigue and the number of stage movements. By streamlining observation routines, the eyepiece contributes to improved throughput in laboratory or workshop environments while maintaining the accuracy expected from a dedicated optical accessory. Compatibility with established inverted microscope lines enhances integration into existing workflows. Designed for reliable integration with Achios inverted systems Engineered for use with Achios inverted microscopes, the eyepiece ensures correct optical positioning and repeatable viewing geometry for binocularity and documentation work. The WF type denotes an emphasis on a wide apparent field, which supports both coarse overview and fine-detail work without changing oculars frequently. As an Euromex product, the component is intended to fit seamlessly into standard inverted configurations used across teaching labs, production inspection benches and technical service environments. Contact Metav Werkzeuge in Emmerich to confirm fitment and application guidance for the Euromex widefield eyepiece and to discuss how it can optimise inverted-microscope inspections at the bench Technical Data Article number: AI.6020 Product: Eyepiece Ocular type: WF Manufacturer: Euromex UID: AI.6020 Core data Magnification: 15× Field of view: 16 mm Features and compatibility Widefield eyepiece Compatible with Achios inverted microscopes Euromex product FAQ What magnification and field of view does the eyepiece offer? The Widefield WF 15x/16 mm eyepiece (Euromex) provides 15× magnification and a 16 mm field of view, suited to detailed inspection with a broad perspective. Will this ocular fit Achios inverted microscopes? Yes — the eyepiece is specified for use with Achios inverted microscopes, ensuring proper optical alignment and mechanical fit within that series. How does a widefield eyepiece improve routine inspection? A wide apparent field reduces the need for constant repositioning and refocusing, allowing quicker visual passes and lower operator fatigue while preserving the ability to examine fine detail. Is the eyepiece suitable for visual inspection and basic documentation? The broad field and higher magnification are well suited to visual inspection; compatibility with imaging depends on the microscope’s phototube and camera coupling rather than the eyepiece alone. What does the WF designation mean? WF denotes a widefield eyepiece type, designed to offer an expanded apparent field for improved situational awareness during observation. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
16-Piece Microscope Maintenance Kit Cleaning Brushes Screwdriver Set Lens Cleaner Cloth Paper Oil - Euromex
Take advantage of a compact, all-in-one maintenance solution that combines essential cleaning agents, precision hand tools and protective storage for dependable microscope upkeep; order the set directly via Metav Werkzeuge or consult our specialists for tailored advice. Euromex Microscope Maintenance Set PB.5276 — comprehensive kit with cleaning supplies and hand tools Euromex Microscope Maintenance Set PB.5276 provides a practical toolkit for routine care and fast on-site adjustments of optical instruments in laboratories, workshops and education facilities. Complete maintenance kit for microscopes Precision screwdriver and hex key set Lens cleaning fluid and lens paper included Supplied in a durable tool case Keep optics performing: clean, lubricate and adjust with confidence Regular care extends the service life of optical equipment and prevents costly downtime. This microscope maintenance set groups the most-used consumables and hand tools in one compact tool case, ensuring that routine tasks such as dust removal, lens cleaning and mechanical adjustment are quick and reproducible. The included lens cleaning fluid is formulated for delicate coatings and, together with lens paper, removes fingerprints and smudges without streaking. The small blow‑bulb safely ejects grit from crevices, while the cleaning brush reaches narrow parts without damaging components. These items provide clear, measurable benefits: reduced contamination, steadier imaging and fewer service interventions. Practical precision: tools suited to optical mechanics and fine adjustments The set contains a compact 6-piece screwdriver set, a selection of hex keys (1.5, 2, 2.5 mm) and a small oil bottle plus maintenance grease, enabling controlled mechanical maintenance. Screwdrivers are sized for typical instrument fastenings and the hex keys support collet and clamp adjustments found on many stands and holders. Using the right tool reduces the risk of slippage or damaged fasteners and helps maintain calibration. For users unfamiliar with fine-mechanical care, the kit bundles only non-specialist tools and consumables, making basic maintenance straightforward without requiring specialist equipment or expertise. Durable organisation and everyday readiness for labs and classrooms Stored in a sturdy tool box, the kit keeps consumables and tools organised and transportable, supporting field use and shared facilities. Consumables such as lens paper (gentle, lint-free sheets) and measured bottles of cleaning liquid and oil mean the contents are immediately deployable and easy to replenish. The practical layout reduces searching time and supports a disciplined maintenance routine, which in turn preserves optical performance and user confidence. For institutions and technicians seeking consistent results, this combination of consumables and hand tools makes regular servicing predictable and efficient. For reliable, routine microscope upkeep, order the Euromex set through Metav Werkzeuge or contact our Emmerich team for specialist guidance and procurement assistance. Technical data Article number: PB.5276 Product type: Microscope maintenance set Packaging: Tool box Core data Pieces per set: 16 Lens cleaning fluid: 20 ml Cleaning cloth: 140 × 140 mm Lens paper: 100 sheets Oil bottle: 10 ml Hex key sizes: 1.5 / 2 / 2.5 mm Contents Cleaning brush Screwdriver set (6 pieces) Blower (bulb) Hex keys (1.5 / 2 / 2.5 mm) Lens cleaning fluid (20 ml) Cleaning cloth (140 × 140 mm) Lens paper (100 sheets) Tube of maintenance grease Oil bottle (10 ml) Supplied in a tool case FAQ What is included in the kit? The Euromex microscope maintenance set PB.5276 contains a cleaning brush, 6-piece screwdriver set, blower, three hex keys (1.5, 2, 2.5 mm), 20 ml lens cleaning fluid, 140 × 140 mm cleaning cloth, 100 sheets of lens paper, a tube of maintenance grease and a 10 ml oil bottle, all packed in a tool case. Is this kit suitable for classroom microscopes and research instruments? Yes, the PB.5276 set is designed for general microscope upkeep and is suitable for both classroom and light‑duty laboratory use; it supports routine cleaning and basic mechanical adjustments without specialised tools. How should the lens cleaning fluid and paper be used? Apply a small amount of the lens cleaning fluid to the lens paper or cleaning cloth and clean gently in a circular motion; the Euromex kit supplies measured consumables intended for coated optics to reduce the risk of abrasion. Are the hand tools safe for fine mechanical adjustments? The included screwdrivers and hex keys are sized for typical optical fastenings and, when used with care, provide controlled adjustment for mountings, focus mechanisms and accessory clamps in microscopes. Can consumables be replenished from common suppliers? Yes, the kit contains standard items such as lens paper, cleaning fluid, blower and small oil bottles that can be re‑ordered from laboratory supply vendors or through Metav Werkzeuge Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
160mm Binocular iScope Microscope EWF 10x/22mm Eyepieces Plan Polarisation Objectives 5/10/20/S40x Bertrand Lens NeoLED Köhler Lighting - Euromex
Take advantage of the combination of polarisation-ready optics, a rotatable 160 mm stage, and reliable NeoLED Köhler illumination for consistent sample inspection; order the instrument via Metav Werkzeuge or consult our specialists for tailored advice. IS.1052-PLPOLi — iScope binocular microscope with polarisation kit and NeoLED Köhler illumination The IS.1052-PLPOLi is a binocular iScope microscope configured for polarisation applications and routine laboratory inspection, equipped with wide-field eyepieces, plan polarisation objectives and a stable brightfield Köhler light source. Binocular iScope head with EWF 10x/22 mm eyepieces Plan polarisation objectives 5x, 10x, 20x and S40x 160 mm rotatable circular stage with analyser slider 3 W NeoLED Köhler brightfield illumination for stable light Reliable polarisation imaging for material and petrographic work Equipped with plan polarisation objectives and a dedicated polariser and analyser slider, this configuration supports clear crossed-polar observations and interference colour assessment. The inclusion of a Bertrand lens allows conoscopic examination and fine adjustment of the optical path for birefringent samples. Such features make the instrument suitable for comparative mineralogy, composite inspection and routine polarisation tasks where reproducible optical contrast is crucial. Wide-field viewing and versatile magnification for routine inspection The binocular head with EWF 10x/22 mm eyepieces provides a generous field of view and ergonomic observation for extended use, while the set of IOS objectives (5x, 10x, 20x and S40x) supplies the working range needed for coarse surveying and detailed inspection. The optical layout balances resolution and working distance, so a laboratory or teaching environment benefits from fast specimen orienting and clear detail when switching magnifications. Stable mechanical platform for repeatable positioning A 160 mm circular stage with a rotatable mechanism (60° range indicated) and an analyser-compatible slider ensures specimens remain secure during polarisation adjustments. The mechanical design prioritises repeatability and straightforward sample alignment, reducing repositioning time between observations. This rigidity supports consistent imaging across sessions and minimises operator-induced variation in results. Consistent illumination and practical accessories for clearer results The 3 W NeoLED Köhler illumination delivers a stable brightfield light source with good colour rendition and low thermal load, aiding prolonged microscopy sessions. Köhler alignment improves homogeneity across the field, which complements the polarisation optics for even contrast. Accessories such as the analyser slider and Bertrand lens are integrated to broaden the instrument’s analytical capability without complicating routine operation. For polarisation microscopy requirements, contact Metav Werkzeuge for personalised consultation and ordering; eMail info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical Data Article number: IS.1052-PLPOLi Label: IScope binocular Microscope with EWF 10x/22 mm eyepieces, plan Polarisation PLPOLi 5/10/20/S40x IOS objectives, 160 mm circular stage, 60° rotatable polariser and analyser slider, Bertrand lens, 3 W NeoLED Köhler illumination Manufacturer: Euromex Facts Eyepiece magnification: 10x Eyepiece field number: 22 mm Objective magnifications: 5x, 10x, 20x, S40x Stage diameter: 160 mm Stage rotation: 60° Illumination power: 3 W Special features Binocular head EWF eyepieces Plan polarisation PLPOLi objectives IOS objectives Bertrand lens Polariser and analyser slider Rotatable circular stage NeoLED Köhler brightfield illumination FAQ What magnifications are included with this microscope? The IS.1052-PLPOLi is supplied with EWF 10x/22 mm eyepieces and a set of PLPOLi objectives at 5x, 10x, 20x and S40x for flexible inspection from overview to detail. Is this instrument suitable for polarisation microscopy? Yes — the binocular system includes a polariser, an analyser slider and a Bertrand lens, enabling both orthoscopic and conoscopic polarisation techniques useful in petrography and materials analysis. What type of illumination does it use? This configuration uses a 3 W NeoLED Köhler brightfield illumination that provides uniform, stable light and low heat for extended observation periods. Does the stage allow rotation and analyser adjustments? The model features a 160 mm circular stage with rotation and a dedicated analyser slider, facilitating controlled sample rotation and polarisation alignment. Is the microscope suited to teaching and routine laboratory use? With its wide-field eyepieces, robust mechanical stage and straightforward polarisation accessories, the microscope is well suited to teaching labs and routine analytical workflows. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
160mm Trinocular Microscope Polarisation Plan PLPOLi 5/10/20/S40x EWF 10x/22mm, Bertrand Lens - Euromex
The combination of a trinocular head, plan polarisation objectives and a Bertrand lens delivers reliable polarised-light analysis with straightforward documentation. Benefit from stable Köhler illumination and a 160 mm rotating stage for repeatable sample orientation — order via Metav Werkzeuge or request technical advice from our consultants. IS.1053-PLPOLi trinocular microscope with polarisation and Bertrand lens (Euromex) The IS.1053-PLPOLi is a trinocular microscope designed for polarised-light analysis and routine laboratory inspection, featuring EWF 10x/22 mm eyepieces, plan polarisation objectives and a 160 mm circular rotating stage. Trinocular head for camera integration EWF 10x/22 mm eyepieces Plan polarisation objectives 5–40x Bertrand lens for conoscopic observation 3 W NeoLED Köhler illumination Engineered for dependable polarised-light analysis This instrument combines plan polarisation objectives with an integrated polariser and analyser slide to make birefringence and anisotropy visible with clarity. The inclusion of a Bertrand lens enables conoscopic observation and rapid assessment of interference figures, which is particularly valuable for mineralogical identification and stress analysis in transparent materials. The optical train is designed to preserve field flatness and contrast across the useful magnification range, supporting consistent analytical results in lab workflows. Efficient imaging and documentation workflow A trinocular head and wide-field EWF 10x/22 mm eyepieces provide comfortable observation while permitting simultaneous camera attachment for image capture or live streaming. The set of plan polarisation objectives covering 5x, 10x, 20x and S40x enables precise resolution of structural detail without compromising image flatness. This combination reduces the need for frequent refocusing when switching magnifications and supports reproducible documentation for reports and teaching material. Uniform illumination and precise sample handling The built-in 3 W NeoLED Köhler illumination delivers a stable, evenly illuminated field with low heat generation and long service life, improving contrast in brightfield polarisation work. Sample orientation is facilitated by the 160 mm rotating stage, which is rotatable by 60° for controlled angular adjustment during crossed-polar experiments. The polariser and analyser are mounted as a slider system for quick engagement, keeping specimen handling efficient and reducing setup time between measurements. Adapted to laboratory, education and inspection environments This optical instrument suits geology, materials science, polymer analysis and instructional laboratories that require reliable polarised-light capability without excessive complexity. The mechanical and optical choices favour durability and straightforward maintenance, while the optical features support both qualitative observation and documented quantitative comparison. For additional specification details or clarification on suitability for a particular application, technical advice is available at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Contact Metav Werkzeuge for tailor-made technical advice on polarised-light microscopy and procurement; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.1053-PLPOLi Manufacturer: Euromex Product type: microscope Series: iScope Head: trinocular Eyepieces: EWF 10x / 22 mm Objectives: plan polarisation 5x / 10x / 20x / S40x IOS Stage: 160 mm round stage, rotatable 60° Illumination: 3 W NeoLED Köhler brightfield Additional optics: Bertrand lens, polariser and analyser slider Facts Eyepiece magnification: 10x Eyepiece field number: 22 mm Objective magnifications: 5x, 10x, 20x, 40x (S40x) Stage diameter: 160 mm Stage rotation: 60° Illumination power: 3 W Special features Trinocular head for camera attachment EWF 10x/22 mm wide-field eyepieces Plan polarisation objectives for flat field imaging Bertrand lens for conoscopic observation Polariser and analyser slider system NeoLED Köhler illumination for uniform brightfield 160 mm circular stage with 60° rotation FAQ What magnifications are available with this polarisation setup? The instrument provides objective magnifications of 5x, 10x, 20x and S40x combined with EWF 10x/22 mm eyepieces, offering a practical range for both overview and detailed polarised-light observation with the IS.1053-PLPOLi. Can a camera be used for documentation and analysis? Yes, the trinocular head supports camera integration for simultaneous observation and documentation; the IS.1053-PLPOLi accommodates image capture workflows while preserving comfortable eyepiece observation. What is the purpose of the Bertrand lens included in the optical path? The Bertrand lens allows conoscopic observation to view interference figures and optical axis characteristics, a key function for mineralogy and stress analysis in transparent samples when using polarisation techniques. How does the NeoLED Köhler illumination benefit routine use? The 3 W NeoLED Köhler illumination provides a uniformly lit field, low thermal load and long lamp life, improving contrast and stability during extended examinations under polarised conditions. Which laboratory applications suit this polarisation microscope? Typical applications include geological thin-section analysis, materials inspection of anisotropic samples, polymer research and teaching laboratories where polarised-light contrast and documented imaging are required. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
160mm Trinocular Microscope with EWF 10x/20mm Eyepieces, Plan Polarisation Objectives 5/10/20/S50x, Bertrand Lens - Euromex
Take advantage of a complete polarisation solution that combines high-contrast plan objectives, versatile illumination and a stable rotating stage for precise material inspection. Order the instrument directly via Metav Werkzeuge or consult our specialists for tailored advice. iScope IS.1053-PLPOLRi trinocular microscope – Plan polarisation optics with Köhler NeoLED and halogen illumination (Euromex) The iScope IS.1053-PLPOLRi is a trinocular microscope designed for polarisation microscopy, material inspection and routine laboratory documentation Trinocular head for simultaneous binocular use EWF 10x / 20 mm eyepieces Plan polarisation objectives 5/10/20/S50x 160 mm rotating stage with 60° polariser and analyser NeoLED Köhler brightfield and 50 W halogen reflected Precise polarisation that reveals internal structure The instrument is equipped with plan polarisation objectives that maintain a flat field across the visual area, enabling consistent, distortion‑free imaging of anisotropic materials. Matched with EWF eyepieces, the optics deliver a wide, comfortable field of view useful for extended examinations. The integrated Bertrand lens allows conoscopic observation, which is essential when assessing interference figures and crystallographic orientations; explained simply, this lens brings the back focal plane into view so birefringence and extinction angles can be analysed without additional accessories. The optical combination reduces the need for repeated refocusing and supports reliable comparative measurements between samples. Stable sample handling that speeds up workflows A substantial 160 mm rotating stage offers smooth, controlled rotation and, combined with the 60° polariser and analyser slide, provides precise orientation of specimens for extinction angle determination and texture inspection. The trinocular head facilitates parallel observational and imaging work: one path for the observer, one for a camera or documentation device, which streamlines reporting and quality control workflows. These mechanical and optical design choices reduce handling time and improve repeatability when evaluating sets of samples or incoming inspection batches. Illumination engineered for contrast and minimal artefacts Illumination combines NeoLED Köhler illumination for transmitted brightfield with a separate 50 W halogen reflected light attachment for opaque specimens. Köhler illumination produces even, shadow‑free light by aligning the condenser aperture and field diaphragm, improving contrast and making subtle details more visible while preventing uneven heating of temperature‑sensitive samples. The 50 W halogen unit provides a stable, high‑intensity beam for surface inspection and metallurgical studies where reflected light is required. Together they enable a broad range of sample types to be examined without swapping core instrumentation. Practical design and supply reliability for laboratories Mechanical and optical components are arranged to support routine laboratory use: the plan objectives deliver field flatness for measurement tasks, the rotating stage supports orientation-dependent analysis and the illumination suite covers both transmitted and reflected techniques. The instrument is manufactured by Euromex, a brand known for laboratory optics, and is offered through Metav Werkzeuge, which provides distribution and supply continuity across Europe. For complementary technical details or to confirm suitability for a specific application, Metav’s specialists are available by e‑mail or telephone. Contact Metav Werkzeuge for expert advice and secure delivery of the Euromex iScope series with polarisation capability; consult our team for specification matching and order handling Technical data Article number: IS.1053-PLPOLRi Label: IScope trinocular microscope with EWF 10x/20 mm eyepieces, plan polarisation PLPOLRi objectives 5/10/20/S50x, 160 mm rotating stage, 60° polariser and analyser slide, Bertrand lens, 3 W NeoLED Köhler illumination and reflected light attachment with 50 W halogen Specifications Eyepiece field number: 20 mm Eyepiece magnification: 10x Objective magnifications: 5x / 10x / 20x / S50x Stage diameter: 160 mm Polariser rotation: 60° NeoLED illumination power: 3 W Reflected light attachment: 50 W halogen Special features Trinocular head Plan polarisation objectives (PLPOLRi) Bertrand lens Köhler illumination (NeoLED) Reflected light attachment (halogen) EWF eyepieces FAQ What types of samples is this microscope suited for? The Euromex iScope IS.1053-PLPOLRi is suited for birefringent minerals, thin sections, polymers and routine material inspection where polarisation contrast and surface reflection are required. How does the polarisation setup help with birefringence analysis? The combination of plan polarisation objectives, a polariser and analyser slide and the Bertrand lens in the iScope IS.1053-PLPOLRi enables observation of interference figures and precise determination of optical axes, supporting accurate birefringence assessment. Is Köhler illumination included and why is it important? Yes. The NeoLED Köhler illumination provides even, controllable transmitted light that improves contrast and resolution while reducing thermal effects, which is particularly beneficial for delicate or heat‑sensitive samples. Can both transmitted and reflected light techniques be used with this system? The instrument includes NeoLED transmitted illumination and a 50 W halogen reflected light attachment, so both transmitted brightfield and reflected light examinations are possible without major reconfiguration. Does the microscope support oriented inspections and angle measurements? The 160 mm rotating stage with precise rotation and the 60° polariser permit controlled sample orientation, facilitating extinction angle observations and systematic texture analysis. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
165mm 0.5× Auxiliary Lens for MZ.4600 Working Distance, Optical Accessory - Euromex
Take advantage of the reduced magnification and expanded observation area combined with a maintained long working distance for more efficient inspection and easier manipulation under the microscope. Order the accessory directly via Metav Werkzeuge or contact our consultants for compatibility advice. 0.5x auxiliary lens for MZ.4600 (165 mm working distance) — Euromex attachment lens The 0.5x auxiliary lens for MZ.4600 is an attachment lens that lowers magnification and increases the field of view for stereo microscopes used in inspection and documentation tasks 0.5x magnification converter Maintains 165 mm working distance Compatible with MZ.4600 stereo head Broader field of view for faster inspection results Fitting a 0.5x converter increases the visible area without altering the eyepiece or main objective, so tasks that require overview and sample manipulation are completed more swiftly. The working distance of 165 mm remains available, which preserves room for probes, tools or lighting while reducing the need for repeated refocusing. This combination delivers a measurable productivity gain in quality control and assembly applications by enabling quicker orientation and fewer handling steps. Designed for straightforward integration and repeatable accuracy The attachment is engineered as a simple optical add-on for stereo systems, ensuring rapid installation and secure seating on the microscope head. Thanks to its compatibility with the specified stereo head, alignment is easily achieved and repeatability is improved in serial inspection routines. The accessory lens is described in clear technical terms and requires no elaborate recalibration, which reduces downtime and supports continuous workflows in small labs and production benches alike. Reliable optical behaviour for documentation and detailed work Manufactured to complement Euromex optical systems, the converter supports consistent image projection suitable for photography and visual documentation. The optical balance between reduced magnification and an expanded field of view helps preserve image clarity across the frame, making image capture and measurement more reliable. As a compact optical accessory, it contributes to a calmer workflow, lowering the frequency of repositioning and giving operators greater confidence in repeat measurements. For compatibility checks or to order the Euromex 0.5x auxiliary lens (MZ.4625), contact Metav Werkzeuge for tailored advice and swift supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MZ.4625 Label: 0.5x auxiliary lens for MZ.4600, 165 mm working distance Manufacturer: Euromex Microscopen bv Product type: Objective / Lens UID: MZ.4625 Facts Magnification factor: 0.5x Working distance: 165 mm Special features Attachment lens for stereo microscopes Compatible with MZ.4600 stereo head Suited for inspection and documentation tasks FAQ What effect does the accessory lens have on magnification and viewable area? The 0.5x auxiliary lens reduces the effective magnification by half and expands the field of view, allowing broader inspection without changing the eyepiece on the Euromex attachment (MZ.4625). Is this lens compatible with other Euromex stereo heads? Compatibility is specified for the MZ.4600 stereo head; the lens (MZ.4625) is designed for secure mounting with that model and for optimal optical alignment. How is the lens mounted and adjusted? The converter is an attachment lens that fits onto the stereo head with a straightforward mechanical coupling; alignment is maintained by the mounting interface to ensure repeatable positioning. Can the lens be used for photographic documentation? Yes, the auxiliary lens supports documentation workflows by delivering a wider view with consistent optical behaviour suitable for image capture and measurement. Does the accessory preserve the working distance required for tool access? The design maintains a working distance of 165 mm, keeping sufficient space for probes, lighting and manipulation during inspection. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
16mm 15x Eyepiece Wide Field for DZ-Series Head - Euromex
Take advantage of the 15x magnification and the generous 16 mm field of view to speed up visual inspections and reduce operator fatigue; the eyepiece is optimised for the DZ-series microscope head, ensuring a straightforward optical upgrade. Order the component directly via Metav Werkzeuge or consult their specialists for compatibility advice. Eyepiece EWF 15x/16 mm for DZ-series head (Euromex) Eyepiece EWF 15x/16 mm for DZ-series head — an extra-wide-field optical eyepiece designed to extend the observation area of DZ-series microscope heads for precise inspection tasks in workshops and laboratories Extra-wide field 16 mm field of view for broader inspection High 15x magnification for detailed visual work Compatible with DZ-series microscope heads Single-unit supply for straightforward replacement Enhanced visual reach for faster inspections The EWF eyepiece delivers a 15x level of magnification combined with a 16 mm field of view, which translates into a noticeably larger visible area compared with standard oculars. This broader visual span reduces the need for frequent stage movement during inspection, meaning that repetitive checks can be completed more quickly and with less mechanical handling. The optical combination is ideal for tasks where both detail and context matter, such as component inspection, quality control checkpoints and sample pre-screening. The design prioritises clarity across the entire viewing circle so that operators benefit from consistent image quality at the edges as well as the centre. Seamless fit with DZ-series heads to minimise downtime Designed specifically for integration with the DZ-series microscope head, the eyepiece ensures a reliable mechanical and optical match, simplifying replacement and upgrades. The construction facilitates rapid exchange without extensive realignment, so instrument availability is maximised and maintenance windows are kept short. Where a laboratory or workshop operates multiple DZ-series units, standardising on this eyepiece helps to harmonise viewing characteristics across stations and supports consistent inspection results. Compatibility-focused design reduces the administrative overhead associated with part selection and procurement. Practical advantages for everyday workshop and lab use Beyond raw optical performance, the eyepiece is intended to support ergonomic and workflow improvements: the extra-wide field lowers eye strain during prolonged inspections, while the substantial magnification helps to reveal fine defects and surface features that might otherwise require higher-magnification objectives. For environments where throughput and accuracy matter, this eyepiece acts as a small but effective productivity enhancer. If additional technical data or confirmation of fit is required, Metav Werkzeuge provides direct advisory support and can supply the component with documentation to match individual equipment fleets For precise optical upgrades and expert procurement assistance for DZ-series microscopes, contact Metav Werkzeuge for customised advice and secure the Euromex EWF eyepiece via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: DZ.3015 Description: Eyepiece EWF 15x/16 mm for DZ-series head Manufacturer: Euromex Microscopen bv Facts Magnification: 15x Field of view: 16 mm SKU/UID: DZ.3015 Special features EWF extra-wide field eyepiece Compatibility: DZ-series microscope head Single eyepiece supply Cross-selling SKUs: DZ.1100;DZ.1105;DZ.1600;DZ.1605;DZ.1800;DZ.1805 FAQ What magnification and field does this eyepiece provide? The Euromex eyepiece offers 15x magnification with a 16 mm field of view, giving a larger visible area for inspections. Is this eyepiece compatible with all DZ-series heads? The eyepiece is designed for integration with DZ-series microscope heads; compatibility with specific models should be confirmed with Metav Werkzeuge if needed. Can the EWF eyepiece reduce inspection time? Yes, the extra-wide field reduces stage adjustments and allows more area to be seen at once, which can speed up routine visual checks. Is this eyepiece suitable for workshop and laboratory environments? The optical characteristics of the eyepiece make it well suited to both workshop inspection and laboratory use where a balance of context and detail is required. Are there recommended companion parts for full system optimisation? For optimised setups, consider matching objectives and illumination configured for DZ-series heads; refer to the listed cross-selling SKUs for compatible components. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
16mm 15x Widefield Eyepiece for iScope 30mm Tube, WF Optical Field - Euromex
Combine 15× magnification with a 16 mm field number and a 30 mm tube for a comfortable, wide viewing experience that speeds routine inspection. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for compatibility advice and swift delivery. WF 15x/16 mm Eyepiece for iScope (30 mm tube) — Euromex The WF 15x/16 mm Eyepiece for iScope that delivers a wide apparent field and precise intermediate magnification for laboratory, educational and light industrial inspection tasks. Widefield optics for larger viewing area 15× magnification for fine detail 16 mm field number for broad field of view 30 mm tube diameter for secure fitting More detail with less eye strain The combination of 15× magnification and widefield optics provides detailed resolution while preserving visual comfort during extended use. A larger apparent field reduces the need for constant repositioning of samples, which translates into quicker assessments and reduced operator fatigue. The construction follows standard microscope eyepiece practice, so the optic is optimised for visual clarity and consistent performance across routine inspections. Faster inspection thanks to a broad field of view A 16 mm field number denotes a comparatively wide apparent field, enabling more of the specimen to be seen at once. For technicians and instructors who frequently scan slides or small components, this means fewer frame-to-frame adjustments and a measurable improvement in throughput. The term “field number” is the optical specification for apparent field diameter; a larger value equals a broader viewing window without changing magnification or objective selection. Simple integration into iScope systems Designed for the iScope series and specified with a 30 mm tube, the eyepiece fits directly into compatible ocular tubes, offering straightforward installation and stable seating. The widefield type (WF) aligns with common accessory standards for educational and bench microscopes, ensuring reliable mechanical mating and repeatable optical alignment when swapping oculars or combining with different objectives. Practical choice for workshops and teaching labs This eyepiece suits applications where a balance of magnification and field coverage is required — for example, component inspection, specimen teaching demonstrations or general laboratory observation. The optical specification is clear and verifiable, supporting informed purchasing decisions for procurement teams and technical managers who prioritise consistency and compatibility in instrument outfitting. Contact Metav Werkzeuge for tailored advice on the Euromex WF 15× eyepiece and to arrange supply from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: IS.6215 Product: WF 15x/16 mm eyepiece Series: iScope Manufacturer: Euromex Facts Magnification: 15× Field number: 16 mm Tube diameter: 30 mm Special features Widefield (WF) eyepiece Designed for iScope series Optical accessory for microscopes FAQ Is this eyepiece compatible with all iScope models? Compatibility depends on the ocular tube diameter of the microscope; the WF 15x/16 mm eyepiece is specified for a 30 mm tube and matches iScope models with that tube diameter. What does a 16 mm field number mean in practice? A 16 mm field number indicates a relatively wide apparent field, so the eyepiece shows a larger portion of the specimen at once compared with eyepieces of lower field number. Can the eyepiece be used for education and industrial inspection? Yes, the Euromex widefield eyepiece is suitable for both teaching and light industrial inspection where a balance of magnification and field of view is required. How should the eyepiece be cleaned to avoid damage? Use a soft, lint-free cloth and appropriate optical cleaning fluid; avoid aggressive solvents and abrasive materials to protect the optical surfaces of the eyepiece. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
16mm 15x Widefield Eyepiece for Ø30mm Tube, Delphi-X Observer - Euromex
Taking advantage of the combination of 15× magnification, a 16 mm field number and a standard Ø 30 mm tube interface ensures faster inspections and smooth integration into existing Delphi‑X Observer setups; order directly via Metav Werkzeuge or consult the Metav experts for application advice. Wide-field WF 15× / 16 mm eyepiece for Ø 30 mm tube – Euromex Delphi‑X Observer Wide-field WF 15× / 16 mm eyepiece for comfortable, high-detail observation in laboratory and inspection environments with a Ø 30 mm tube fit Wide-field WF optics for enhanced field view 15× magnification for detailed observation 16 mm field number for broader image Fits Ø 30 mm tube; Delphi‑X Observer compatible Higher inspection throughput with consistent 15× detail The 15× magnification delivers reliable enlargement for a wide range of metrology and inspection tasks, enabling precise visual assessment of small features without the need for complex camera systems. As a dedicated eyepiece designed for industrial microscopy, the ocular reduces the frequency of repositioning and re-focusing, which translates into measurable time savings during repetitive checks. The optical choice supports tasks such as component inspection, solder-joint examination and fine assembly verification by providing stable, high-contrast detail at moderate magnification. Broader view for faster navigation and fewer retakes Equipped with a 16 mm field number, this wide-field ocular provides a noticeably larger observable area than standard eyepieces, so workflows that require scanning or orientation across a specimen are more efficient. The field number indicates the diameter of the exit pupil in millimetres and directly relates to the angular width of the view through the eyepiece; a larger figure means less stage movement and fewer retakes. For inspection stations and training benches where speed and clarity matter, the wide apparent field reduces eye repositioning and improves operator comfort. Simple mechanical fit and system compatibility Engineered to interface with a Ø 30 mm tube, the eyepiece integrates cleanly into the Delphi‑X Observer series without adapters, providing a plug‑and‑play solution for retrofits and spare parts management. The form factor adheres to common microscopy standards used in industrial and educational environments, which eases inventory handling and reduces the number of required spare components. This compatibility facilitates quick swap-outs during shift changes or instrument servicing, maintaining steady production uptime. Optical comfort for extended use and precise assessment The wide-field design and optical layout minimise peripheral distortion and reduce eye fatigue during prolonged observation, supporting sustained quality-control sessions and teaching labs. As a WF-type ocular, it balances a generous apparent field with a comfortable eye relief that helps maintain focus and accuracy over long periods. For operators who perform detailed visual inspections, the combination of optical comfort and stable magnification supports both concentration and reliable judgement calls. For supply, compatibility checks or application-specific recommendations for the Euromex wide-field WF 15× / 16 mm eyepiece, contact Metav Werkzeuge for local delivery from Emmerich and tailored technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.6015 SKU: DX.6015 Label: Wide-field WF 15×/16 mm eyepiece for Ø 30 mm tube for Delphi‑X Observer Manufacturer: Euromex Microscopen bv Facts Magnification: 15× Field number: 16 mm Tube diameter: Ø 30 mm Model series: Delphi‑X Observer Special features Wide-field (WF) eyepiece Compatible with Delphi‑X Observer series Product type: eyepiece Optical comfort for extended observation FAQ What magnification does this eyepiece provide? The eyepiece delivers 15× magnification, which is suitable for detailed visual inspection and quality-control tasks with the Delphi‑X Observer. How large is the usable field of view? The ocular has a 16 mm field number, giving a broader apparent field that reduces stage movement during examination. Which tube diameter does the eyepiece fit? This eyepiece is designed for a Ø 30 mm tube, providing direct compatibility with Delphi‑X Observer mounts. Can the eyepiece be used for prolonged inspection sessions? Yes; the wide-field WF design reduces peripheral distortion and helps reduce eye strain, making it suitable for extended observation periods. Is this eyepiece compatible with other Euromex models? Compatibility is specified for the Delphi‑X Observer; mechanical fit and optical performance with other models should be verified against the Ø 30 mm tube interface. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
16mm 15x Widefield Eyepiece for Ø30mm Tube, WF Optics - Euromex
Taking advantage of 15× magnification and a 16 mm field number, this wide-field eyepiece combines improved detail resolution with a larger usable viewing area for routine inspection and documentation. Order via Metav Werkzeuge for reliable supply from Emmerich or contact the consultants for application advice. Wide-field WF 15×/16 mm eyepiece for Ø30 mm tube – Delphi‑X Inverso (Euromex) Wide-field WF 15×/16 mm eyepiece for use with Delphi‑X Inverso microscopes and Ø30 mm ocular tubes, optimised for extended field of view and comfortable long-session observation 15× magnification for detailed observation 16 mm field number for wider view Compatible with Ø30 mm eyepiece tubes WF design for reduced edge distortion Enhanced detail with steady 15× magnification The 15× magnification delivers a clear increase in apparent detail compared with standard eyepieces, making fine structures easier to inspect under the microscope. Thanks to the wide-field optical design, the eyepiece preserves image quality across the usable field, which helps when examining extended samples or when switching between objective lenses. The result is a reliable optical accessory that supports accurate visual work without demanding complex adjustments. Larger usable viewing area for less eye strain With a 16 mm field number, this eyepiece provides a noticeably wider viewing area than conventional oculars of similar magnification. The expanded apparent field reduces the need for frequent stage movement and helps maintain orientation on the specimen, improving workflow efficiency. The broader visual window also lessens eye fatigue during prolonged inspections, supporting sustained concentration in workshop and laboratory environments. Robust compatibility and simple installation Designed for insertion into a Ø30 mm tube, the eyepiece fits common ocular mounts and integrates seamlessly with the Delphi‑X Inverso series. Mechanical tolerances ensure stable seating and repeatable positioning, which is essential for documentation or when swapping oculars between instruments. The WF design and standard tube diameter make this eyepiece a practical choice when a compact upgrade to existing microscopes is required. Practical construction for everyday laboratory use Manufactured to industry standards, the eyepiece balances optical performance with durable handling suitable for frequent use. The WF configuration minimises common edge distortions and maintains contrast across the field, supporting both inspection and imaging tasks. Its straightforward form factor simplifies cleaning and storage, while consistent optical behaviour contributes to reproducible visual results in production, quality control and education settings. For precise wide-field observation choose the Euromex Wide-field WF 15×/16 mm eyepiece and contact Metav Werkzeuge for delivery and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DI.6015 Product: Eyepiece Manufacturer: Euromex Core specifications Magnification: 15× Field number: 16 mm Tube diameter: Ø30 mm Special features Wide-field (WF) optical design Compatible with Delphi‑X Inverso series Designed for extended viewing sessions FAQ Is this eyepiece compatible with other microscope brands? Compatibility depends on the eyepiece tube diameter; the DI.6015 is designed for Ø30 mm tubes and will fit any microscope accepting that standard diameter, provided mechanical clearance and optical alignment suit the instrument. What advantage does a 16 mm field number offer? A 16 mm field number increases the apparent field of view, so less stage movement is required and observation becomes more comfortable during extended sessions, improving inspection efficiency and reducing eye fatigue. Can this eyepiece be used for imaging with a camera adaptor? The eyepiece is primarily designed for visual inspection; imaging via a camera adaptor requires careful assessment of the optical path and may need a dedicated camera port or relay optics to preserve image quality. How does the wide-field (WF) design affect image quality? The WF optical design reduces edge distortion and expands the usable field, offering a more uniform view across the aperture which is beneficial for both inspection and teaching applications. Is the eyepiece suitable for continuous use in a production environment? Yes, the eyepiece is constructed for routine laboratory and workshop use, providing stable optical performance and straightforward handling for regular inspection tasks. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
16mm Widefield 15x Eyepiece for Achios Inverted, WF Optics - Euromex
Take advantage of precise widefield observation with the combination of 15× magnification and a 16 mm field number for detailed inverted-microscope inspection; order the eyepiece directly via Metav Werkzeuge or consult our specialists for compatibility advice. Widefield WF 15× / 16 mm eyepiece (AI.6015) by Euromex The Widefield WF 15× / 16 mm eyepiece is a high-magnification ocular designed for use with Achios inverted microscopes, optimised for industrial inspection and laboratory visual tasks Widefield optics, 16 mm field 15× magnification for fine detail Designed for Achios Inverted microscopes Euromex optical quality and consistency Optimised optical performance for clear, detailed inspection The eyepiece delivers a balanced combination of magnification and field of view, enabling precise observation of small structures without constant refocusing. With 15× magnification and a 16 mm apparent field, contrast and detail are prioritised so that defects, surface texture and small component features become readily visible. The widefield design reduces the need for stage movement during scanning, improving inspection throughput and supporting repeatable visual assessments in quality control environments. Compatibility and ergonomic handling for routine workflow Specifically configured for the Achios inverted series, this ocular integrates with standard eyetube dimensions and seating, ensuring straightforward exchange with existing optics. The widefield format improves user comfort by offering a broader visual context, reducing eye strain during prolonged examinations. The eyepiece’s geometry supports straightforward alignment with binocular and trinocular heads, which simplifies laboratory set‑up and contributes to efficient, ergonomic working practices. Durable choice that supports consistent measurement and documentation Engineered to the Euromex standard, the eyepiece contributes to reproducible imaging and observation across multiple operators and sessions. Stable optical characteristics mean fewer recalibrations and consistent visual references for documentation or digital capture. For applications where inspection reliability matters, this ocular offers a dependable optical component that complements objective lenses and camera attachments, enhancing the overall performance of the inverted microscope system. Secure Euromex optical performance through Metav Werkzeuge — contact Metav Werkzeuge for compatibility checks and fast dispatch from Emmerich, or ask our consultants for technical guidance on system integration. Technical data Article number / SKU: AI.6015 Label: Weitfeld WF 15x/16 mm Okular für Achios Inverted Manufacturer: Euromex Core specifications Magnification: 15× Field number: 16 mm Eyepiece type: WF (widefield) Special features and compatibility Product type: Eyepiece Compatible with Achios Inverted microscopes Euromex optical reference FAQ What magnification does this eyepiece provide? The eyepiece offers 15× magnification, suitable for detailed observation and complementing medium- and high-power objective lenses. Which field size can be expected from this ocular? The apparent field is 16 mm, providing a wide visual area that accelerates scanning and reduces stage movements. Is this eyepiece compatible with my Achios inverted microscope? Yes, the eyepiece is specified for use with Achios inverted microscopes and is designed to fit standard eyetube interfaces used on that series. Who manufactures this eyepiece and what is the SKU? The eyepiece is produced by Euromex and listed under SKU AI.6015 for reference in procurement and inventory. Can this eyepiece be used for prolonged inspection sessions? The widefield format and balanced magnification reduce eye strain and support longer observation periods while maintaining visual comfort. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
16mm Widefield Eyepiece HWF 15x, 16mm Field - Euromex
Take advantage of wide-field optics, 15× magnification and seamless compatibility with Oxion Inverso inverted microscopes for extended, comfortable inspections — order directly via Metav Werkzeuge or consult our specialists for application support. Wide-field Eyepiece HWF 15× / 16 mm (OX.6015) for Oxion Inverso — Euromex eyepiece A Wide-field Eyepiece HWF 15×/16 mm engineered to expand the usable field of view in inverted microscopy and to support precise, comfortable observation in laboratory and production environments. Wide-field 16 mm field number High-contrast 15× magnification Compatible with Oxion Inverso series Robust Euromex optical design Optimised optics for clearer, more informative observation The HWF wide-field construction delivers a noticeably larger apparent field of view compared with standard oculars, making it easier to monitor specimens or processes without frequent repositioning. With 15× magnification and a 16 mm field number, the eyepiece balances magnification and visible area to support detailed inspection while maintaining situational awareness. The term field number denotes the diameter of the image circle produced by the eyepiece in millimetres; a larger value corresponds to a wider usable image. This combination of optics reduces the need for repeated stage adjustments and helps operators work more efficiently during extended observation tasks. Designed for comfortable workflow and straightforward integration Ergonomics and compatibility are central to routine microscopy. The ocular’s HWF design eases visual strain by providing a broader viewing area, which is particularly beneficial during continuous use in labs or on the shop floor. The eyepiece is specified for the Oxion Inverso model series, enabling direct replacement or upgrade of existing eyepieces in that platform. Interchangeability with the Oxion Inverso range simplifies inventory and training requirements and contributes to predictable inspection outcomes across instruments, supporting consistent measurement and quality-control processes. Durable optics backed by established expertise As an optical component from Euromex, this eyepiece combines proven manufacturing quality with materials and finishes selected for longevity in professional settings. The product is suitable for recurring inspection cycles where reliable visual performance matters. Metav’s distribution and service structure further supports consistent supply and technical guidance: as a longstanding precision partner, Metav provides a broad portfolio and field-proven advice to integrate optical components into production and laboratory workflows. This alignment of respected optics and dependable supply reduces procurement risk and supports long-term operational stability. For purchase recommendations or technical advice on integrating the Euromex Wide-field Eyepiece HWF 15×/16 mm (OX.6015) with Oxion Inverso systems, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com — consultants are available to advise on application fit and compatibility Technical data Article number: OX.6015 Product type: Eyepiece Model series: Oxion Inverso Ocular type: HWF Manufacturer: Euromex Core specifications Magnification: 15× Field number: 16 mm Features Wide-field HWF design Compatible with Oxion Inverso inverted microscopes Intended for professional inspection and laboratory use FAQ What magnification does this eyepiece provide? The Euromex Wide-field Eyepiece HWF 15×/16 mm (SKU OX.6015) offers 15× magnification, providing a balance between detail and field of view for inspection tasks. What does the 16 mm field number mean? A 16 mm field number indicates the diameter of the eyepiece image circle; higher values produce a larger usable field of view, which is the case for this wide-field HWF eyepiece. Is this eyepiece compatible with Oxion Inverso microscopes? Yes — the eyepiece is specified for the Oxion Inverso series and is suitable for direct use with those inverted microscopes. What is meant by HWF in the eyepiece description? HWF denotes a wide-field ocular design; it is optimised to present a broader apparent field, improving situational awareness during observation. Can this eyepiece be used for continuous inspection tasks? The optical design and Euromex manufacturing quality make the eyepiece appropriate for extended inspection and routine laboratory work, where a larger field and steady visual performance are beneficial. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
17.5mm Wide Field 12.5x Eyepiece for Ø30mm Tubes, 17.5mm Field - Euromex
Take advantage of the wide-field optical design and precise 12.5× magnification for faster specimen scanning and improved observation comfort; order directly via Metav Werkzeuge for reliable supply or ask the Metav consultants for specification support. WF 12.5× / 17.5 mm wide-field eyepiece for Ø 30 mm tube – Delphi‑X Observer (Euromex) WF wide-field eyepiece for Delphi‑X Observer that increases the visible field for inspection and educational tasks on microscopes with a 30 mm tube Wide-field design for extended visual field 12.5× magnification for detailed observation 17.5 mm field number for broader specimen view See more at once with a true wide field The wide-field design increases the apparent field so more of the sample can be examined without repeated repositioning. With a 17.5 mm field number, the ocular offers an appreciably larger usable image circle than standard eyepieces, which means faster visual scanning and fewer interruptions during inspection. This benefit is particularly relevant for quality control and educational settings where time-efficient overview and repeatable observation are essential. The optical construction reduces the need for frequent stage movement, improving throughput in routine examination tasks. Comfortable, precise observation for detailed work Combining 12.5× magnification with a wide apparent field strikes a balance between detail resolution and situational awareness at the eyepiece. The result is steadier visual tracking of structures and a reduced requirement for frequent refocusing, which supports consistent measurement and documentation workflows. As an ocular designed for professional use, the unit delivers stable image quality across the field, enabling accurate assessment of specimens while supporting operator comfort during extended sessions. Reliable fit and straightforward integration into existing setups Designed for a Ø 30 mm tube interface, the eyepiece provides a secure mechanical fit with the Delphi‑X Observer series and compatible stands. The form factor ensures stable seating and repeatable alignment, which is important for calibrated inspection and comparative observation. Supplied as a dedicated wide-field ocular, it integrates readily into existing optical chains, making it an economical upgrade to enhance the viewing capability of a microscope without altering the instrument’s core optics. Contact Metav Werkzeuge for availability and technical advice on the Euromex wide-field eyepiece for Delphi‑X Observer — Metav Werkzeuge GmbH supplies directly from Emmerich and can advise on compatibility and ordering options Technical Data SKU: DX.6012 Manufacturer: Euromex Product type: Eyepiece Model series: Delphi‑X Observer Specifications Magnification: 12.5× Field number: 17.5 mm Tube diameter compatibility: Ø 30 mm Ocular type: WF (wide-field) Features Wide-field optical design Compatible with Delphi‑X Observer series Designed for routine inspection and educational use FAQ Is this eyepiece compatible with Delphi‑X Observer microscopes? Yes. The eyepiece is specified for the Delphi‑X Observer series and fits a Ø 30 mm tube, providing a secure and repeatable mechanical connection. What practical advantage does a 17.5 mm field number offer? A 17.5 mm field number increases the visible area through the eyepiece, permitting broader specimen views and faster scanning, which reduces stage movement and observation time. Does the eyepiece support detailed measurement at 12.5×? The 12.5× magnification provides a good compromise between resolution and overview, enabling detailed inspection while preserving a wide field for comparative assessments. Can this ocular be used for both educational and industrial inspection tasks? Yes. The wide-field design and robust fit make the eyepiece suitable for classroom demonstration as well as inspection processes where consistent observation and operator comfort are required. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
170mm 0.5× Auxiliary Lens Working Distance 170mm, Compatible with StereoBlue Series - Euromex
Benefit from 0.5× magnification and a 170 mm working distance for a wider field of view and comfortable sample clearance; compatible with StereoBlue rack-and-pinion stands with a maximum object height of 20 mm. Order the SB.8905 directly via Metav Werkzeuge or consult our specialists to confirm fitment with existing StereoBlue microscopes. SB.8905 Attachment Lens 0.5× for StereoBlue — 170 mm working distance (Euromex) SB.8905 is an attachment lens that halves magnification to increase usable field of view for inspection and documentation on StereoBlue stereo microscopes 0.5× reduction for wider field of view 170 mm working distance for sample clearance Compatible with StereoBlue SB.1902/SB.1903 models Supports samples up to 20 mm in height on rack-and-pinion stands Inspect larger specimens without repositioning The attachment lens reduces the effective magnification to 0.5×, which increases the observable area and simplifies overview inspections. By halving the magnification, the accessory makes it easier to locate features on larger components and to work with bulky specimens without constant readjustment. The reduced magnification also eases manual tasks such as measuring, aligning and documenting parts, so inspection cycles become more efficient while maintaining clear optical performance. Retains comfortable working distance for handling and tooling With a fixed working distance of 170 mm, the lens provides significant clearance between optics and the sample, leaving room for tools, probes or illumination accessories. The accessory is designed for the StereoBlue series and listed compatibility includes SB.1902 and SB.1903 variants; note that rack-and-pinion models SB.1902 and SB.1903 limit the maximum object height to 20 mm, which should be considered when inspecting taller assemblies. This combination of clearance and compatibility supports ergonomic handling and reduces the risk of accidental contact with the optics during routine tasks. Simple optical trade-offs for faster inspection workflows Choosing an auxiliary lens is a trade-off between magnification and coverage: the magnification reduction enlarges the field of view, enabling faster visual scanning and documentation, while the image scale changes accordingly. The SB.8905 attachment lens keeps the optical path aligned with the host system so that familiar adjustment routines remain valid. For many workshop and quality-control applications, this means fewer lens changes, less set-up time and a smoother inspection process, helping to maintain throughput without compromising on the clarity needed for precise work. For assured compatibility and reliable delivery from Metav Werkzeuge, request a fitment check or place an order referencing SB.8905 — Metav Werkzeuge in Emmerich is available to advise on integration with StereoBlue systems and to supply the accessory directly. Technical data Article number: SB.8905 Product: Attachment lens Label: Attachment lens 0.5×, working distance 170 mm. For SB.1902-P, SB.1903-P, SB.1902-U and SB.1903-U. For rack-and-pinion models SB.1902 and SB.1903, the maximum object height is 2 cm Facts Lens factor: 0.5× Working distance: 170 mm Max object height (rack-and-pinion models): 20 mm Special features Compatible series: StereoBlue Compatible models: SB.1902-P; SB.1902-U; SB.1903-P; SB.1903-U Cross-selling SKUs: SB.1902-P; SB.1902-U; SB.1903-P; SB.1903-U FAQ What does 0.5× mean for inspection work? The SB.8905 attachment lens halves the effective magnification, which increases the field of view and enables quicker overview inspections; this is useful when using the StereoBlue system for larger specimens. Is the lens compatible with all StereoBlue models? The accessory is specified for the StereoBlue series and is compatible with the listed models SB.1902-P, SB.1902-U, SB.1903-P and SB.1903-U; the rack-and-pinion variants SB.1902 and SB.1903 impose a maximum specimen height of 20 mm. Will the SB.8905 change the working distance to the sample? The lens provides a working distance of 170 mm, preserving clearance for tools and illumination while changing the magnification and field coverage for more convenient handling. Does using the attachment lens affect illumination needs? Reducing magnification increases the field of view, which can require repositioning or adjusting illumination; the SB.8905 itself does not include lighting, so lighting settings on the StereoBlue system may need fine-tuning. Can the lens be left mounted permanently for routine inspections? Many users retain an auxiliary lens to streamline repetitive tasks; the SB.8905 is intended for straightforward integration with the StereoBlue range to reduce frequent optical changes. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
17mm WF 12.5x Eyepiece for iScope 30mm Tube, Wide Field - Euromex
Benefit from the combination of a wide-field WF design, 12.5× magnification and a 17 mm field number for more efficient, comfortable inspections; order the eyepiece directly via Metav Werkzeuge or consult our specialists if compatibility guidance is required. WF 12.5×/17 mm Eyepiece for iScope, 30 mm Tube — Euromex A WF 12.5×/17 mm eyepiece for iScope microscope systems, engineered to deliver an extended viewing field and consistent image definition for laboratory and routine inspection tasks Wide-field WF design for extended view 12.5× magnification for detailed observation 17 mm field number for broader image 30 mm tube compatibility with iScope Extended field and clear detail for inspection tasks The combination of 12.5× magnification and a 17 mm field number provides a noticeably larger usable image circle than standard oculars, which supports quicker scanning of samples and reduces the need for frequent stage movement. The term field number refers to the diameter of the viewable area measured in millimetres; a higher value means a wider apparent field of view at the eyepiece, which translates into improved situational awareness during visual inspection. For inspection workflows that require both resolution and coverage, this optical accessory balances magnification with a comfortable observation window, enabling efficient assessment of parts, assemblies and samples. Compatibility and ergonomic advantages for extended use Designed for a 30 mm tube interface, this ocular is fully compatible with the iScope series and other systems using the same tube standard, ensuring straightforward integration into existing optical setups. The wide-field design reduces peripheral distortion and helps maintain visual comfort during extended observation periods, which in turn can reduce operator fatigue in repetitive tasks. The ocular’s moderate magnification level supports both detail recognition and contextual overview, making it suitable for quality control, teaching environments and routine laboratory work where frequent specimen orientation is required. Reliable optics from an established manufacturer Produced by Euromex, the eyepiece reflects the brand’s focus on practical optical accessories for microscopes used in laboratory and educational contexts. The optical configuration is intended as a robust, workshop-friendly component rather than a precision instrument for metrology-grade measurements; however, it supports accurate visual inspection and documentable observations when paired with a calibrated optical system. Its straightforward specification set makes it a practical choice for procurement processes that favour compatibility, predictable performance and easy inventory management within workshop or laboratory equipment lists. Contact Metav Werkzeuge for compatibility checks and order support on the Euromex WF 12.5×/17 mm eyepiece; dispatch and technical advice are available from Emmerich — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: IS.6212 Manufacturer: Euromex Product type: Eyepiece Model series: iScope Specifications Magnification: 12.5× Field number: 17 mm Tube diameter: 30 mm Special features Wide-field (WF) eyepiece Compatibility with 30 mm iScope tube Optical accessory for microscopes FAQ What magnification and field of view does this eyepiece provide? The WF 12.5×/17 mm eyepiece delivers 12.5× magnification and a 17 mm field number, offering a wider apparent field than standard oculars for easier sample scanning. Will the eyepiece fit other microscopes with a 30 mm tube? Yes, the eyepiece is compatible with 30 mm tube interfaces and is designed for use in the iScope series and other systems that accept the same tube diameter. What advantage does a wide-field eyepiece offer over standard oculars? A wide-field ocular increases the apparent viewing area (higher field number), reducing the need to move the specimen and improving situational awareness during inspection. Is this eyepiece suitable for teaching and routine laboratory work? The optical balance of moderate magnification and broad field makes the eyepiece well suited to teaching, routine inspection and quality-control visual tasks. How should the eyepiece be maintained? Clean lenses with a lint-free cloth and a suitable optical cleaner; avoid harsh solvents and protect the ocular from dust when not in use. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
18 x 18 mm Cover Glass 0.14 mm Chemical‑Resistant White Glass, Pack of 200 - Globe Scientific
Take advantage of reliably uniform cover slips with chemical-resistant white glass, precise 0.14 mm thickness and contamination-minimising aluminium packaging for consistent microscopy workflows. Order the Globe Cover Glass directly via Metav Werkzeuge or consult our technical team for supply and compatibility guidance. Globe Cover Glass 18 x 18 mm, 0.14 mm — Cover glass (1401-10-200) Globe Cover Glass 18 x 18 mm, 0.14 mm provides a thin, chemically durable protective layer for prepared microscope specimens and routine laboratory imaging. Chemical-resistant white glass material No. 1 thickness class with even planarity Packaged in aluminium for cleanliness 200 per box; 1000 per carton Consistent optical performance for routine microscopy Cover slips with a reliably controlled 0.14 mm thickness deliver predictable optical path differences for brightfield and many common contrast techniques. The thin, even profile reduces focal variation across a field of view, which helps maintain precision microscopy results when using standard objectives and condensers. Where optical repeatability is required, the No. 1 thickness classification and uniform flatness lower the need for frequent refocusing and calibration, supporting faster throughput in specimen preparation. Durable construction that withstands chemical treatments Made from chemical-resistant white glass, the cover slips resist common staining reagents and cleaning agents used in histology and microbiology workflows. The choice of a chemically stable substrate reduces the risk of surface degradation or leaching that could affect delicate samples. This robustness is particularly beneficial for laboratories that perform repeated staining or use solvents, as the material maintains clarity and surface integrity throughout routine procedures. Packaging designed for contamination control and easy handling The aluminium-wrapped packaging preserves cleanliness during storage and transport and supports hygienic dispensing at the bench. Supplied as 200 per box with 1000 per carton availability for larger orders, the packaging minimises particle deposition and moisture ingress while facilitating inventory management. For bench work, the corrosion-resistant wrapping and compact boxes promote contamination-free handling, reducing the likelihood of artefacts on prepared slides. Practical compatibility and reliable supply for standard slides At a dimensions of 18 x 18 mm, these cover slips are suitable for compact sample areas and fit many specialised slide formats and multi-well applications. The Globe Cover Glass 18 x 18 mm, 0.14 mm (SKU 1401-10-200) is optimised for laboratories seeking consistent performance with small-format preparations. For routine procurement, bulk carton quantities support uninterrupted workflows, and the straightforward specification helps integrate the product into existing ordering systems and storage plans. For supply from Emmerich and expert advice on laboratory suitability contact Metav Werkzeuge GmbH — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange availability and shipping information Technical Data Article number: 1401-10-200 Manufacturer: Globe Scientific Model series: Globe Cover Glass Facts Dimension: 18 x 18 mm Thickness: 0.14 mm (No. 1 thickness class) Packaging: 200 per box; 1000 per carton SKU: 1401-10-200 Special features Chemical-resistant white glass Aluminium packaging Uniform planarity for optical consistency Suitable for routine microscopy applications FAQ What is the exact thickness and tolerance of the cover glass? The Globe Cover Glass 18 x 18 mm, 0.14 mm (SKU 1401-10-200) is specified at 0.14 mm and classified as No. 1 thickness, providing consistent planarity for routine imaging. Is the material resistant to common laboratory chemicals and stains? Yes, the cover slips are made of chemical-resistant white glass, which is suitable for use with many standard staining reagents and cleaning agents without rapid surface degradation. How are the cover slips packaged for shipment and storage? They are supplied in aluminium-wrapped boxes, with 200 per box and 1000 per carton, which helps keep the slips clean and reduces contamination risk during storage. Can these cover slips be used with fluorescence microscopy? These slips are designed for general microscopy; their uniform thickness supports consistent focal planes. For specific fluorescence applications, compatibility with optical requirements should be confirmed, and Metav Werkzeuge can advise on suitability. What is the product identification for ordering and stock control? Order or reference Globe Cover Glass 18 x 18 mm, 0.14 mm — manufacturer article number 1401-10-200 for procurement and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18 x 18 mm Cover Glass 0.175 mm Chemical-Resistant White Glass, No. 1.5 Thickness - Globe Scientific
Benefit from the combination of optical consistency, chemical resistance and secure packaging for reproducible microscopy results; order the Globe Cover Glass 1401-15-200 directly via Metav Werkzeuge or ask our consultants if needed. Globe Cover Glass 1401-15-200 — coverslip, 18 × 18 mm, 0.175 mm The Globe Cover Glass 1401-15-200 is a thin, chemically resistant coverslip designed for routine microscopy and high‑magnification imaging applications. Chemical‑resistant white glass construction Thin 0.175 mm, class No. 1.5 thickness Uniform flatness for reliable imaging Aluminium packaging, 200 per box Accurate focal plane for high‑performance imaging A constant thickness of 0.175 mm (classified as No. 1.5) ensures that the focal plane of objectives, particularly high numerical aperture and oil‑immersion lenses, remains stable. The consistent planarity reduces the need for repeated fine focusing and helps maintain image clarity across fields of view. For laboratories that depend on reproducible microscopy results, the precise thickness and uniform flatness of these coverslips support reliable measurements and repeatable imaging sequences. Durable, chemically compatible material for laboratory workflows Manufactured from chemical‑resistant white glass, these coverslips tolerate common staining protocols and reagents used in histology and cytology. The material minimises surface reaction and leaching, which protects sample integrity during mounting and processing. This compatibility reduces specimen artefacts and supports longer observation times under variable chemical conditions, making the coverslips suitable for both educational settings and professional diagnostic workflows. Protected packaging and consistent quality control for the bench Each sheet is protected by aluminium packaging to prevent moisture ingress and mechanical damage during storage and transport. The packaging concept preserves surface quality and reduces dust contamination before use, contributing to fewer repeat preparations and lower sample loss. Consistent manufacturing standards and flatness control deliver predictable handling behaviour, which streamlines routine diagnostic procedures and improves throughput in busy laboratories. For confident, consistent microscopy results, secure Globe Cover Glass stock and expert guidance from Metav Werkzeuge in Emmerich for reliable supply and technical advice. Technical Data Article number: 1401-15-200 SKU: 1401-15-200 Manufacturer: Globe Scientific Model series: Globe Cover Glass Product type: Coverslip Core specifications Dimensions: 18 x 18 mm Thickness: 0.175 mm Thickness class: No. 1.5 Packaging unit: 200 per box; 1000 per carton Materials & special features Material: chemical‑resistant white glass Packaging: aluminium wrapped Surface: uniform flatness Intended use: microscopy coverslip for high‑magnification imaging FAQ Are these coverslips suitable for oil‑immersion objectives? Yes. The Globe Cover Glass 1401-15-200 has a 0.175 mm thickness (No. 1.5), which is the standard recommendation for high‑NA oil‑immersion objectives and supports correct focal positioning. What material is used for the coverslips? The coverslips are made from chemical‑resistant white glass, chosen to withstand common stains and reagents while maintaining surface integrity. How are the coverslips packaged to protect quality? The coverslips are wrapped in aluminium packaging to guard against moisture and particulate contamination during storage and transport. Is flatness consistent across the batch? Yes. The manufacturing process ensures uniform flatness, which contributes to reproducible imaging and fewer focal adjustments. Can these coverslips be used with a wide range of stains and solvents? They are compatible with common laboratory stains and solvents due to their chemical resistance, supporting routine histological and cytological protocols. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18 x 18 mm Cover Glasses 0.13–0.17 mm, Pack of 100 - Euromex
Take advantage of consistently sized cover slips with a controlled 0.13–0.17 mm thickness and precise 18 x 18 mm dimensions for reliable slide preparation; order the cover slips directly via Metav Werkzeuge or ask our consultants if needed. Cover slips 18 x 18 mm, 0.13–0.17 mm – Euromex (PB.5165) Cover slips 18 x 18 mm offer a compact solution for general microscopy, crafted to protect specimens and maintain consistent focal distance across routine and educational applications Uniform 18 x 18 mm dimensions Thickness 0.13–0.17 mm for standard covers Clear optical glass, low distortion Packaged for laboratory use, 100 per pack Consistent slide preparation with precise cover glass dimensions Uniform 18 x 18 mm dimensions and a controlled 0.13–0.17 mm thickness ensure stable specimen mounting and repeatable focusing in everyday microscopy. Consistency in the physical geometry reduces time spent adjusting focus between slides, which directly supports efficient sample throughput in teaching labs and diagnostic routines. The SKU PB.5165 identifies this specific packaging and specification for easy reordering and inventory control. Optical clarity that supports accurate observation and documentation A cover glass with low distortion preserves the specimen's appearance under magnification and reduces optical artefacts that can affect image capture. The thin working thickness keeps the specimen close to the objective’s focal plane, improving resolution with high‑power objectives and enabling reliable imaging with common camera setups. For users new to microscopy, a brief note: the stated thickness range refers to the glass depth and influences cover slip compatibility with certain objectives and immersion media. Packaging and handling designed for laboratory workflow Supplied as a laboratory pack, these cover slips are arranged to simplify slide preparation and storage. Stable packaging minimises breakage during handling and reduces downtime caused by damaged glassware. For routine workflows, lab technicians benefit from uniform consumables that support predictable sample preparation times and reduce the need for repeated slide remakes — a pragmatic benefit for both education and light research environments. For assured supply and expert advice on suitability for specific microscopes, request the Euromex cover slips (PB.5165) through Metav Werkzeuge in Emmerich; contact the Metav team at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and stock information Technical data Article number: PB.5165 Brand: Euromex Product type: Cover slip Dimensions / measurable data Size: 18 x 18 mm Thickness: 0.13–0.17 mm Pack quantity: 100 pieces Materials / special features Application: microscopy slide covering Intended use: routine microscopy and educational use FAQ What size are these cover slips? These cover slips are 18 x 18 mm in size and supplied under SKU PB.5165 by Euromex for standard microscopy applications. What is the thickness range and why does it matter? The thickness is 0.13–0.17 mm; this range influences focal positioning and is suitable for most routine objectives where a thin, consistent cover glass is required. Are these cover slips suitable for high‑power objectives? Yes, the controlled thickness range helps maintain the correct working distance for many high‑power objectives; Euromex cover slips (PB.5165) are appropriate for typical laboratory and teaching setups. How are the cover slips packaged for laboratory use? The product is supplied as a laboratory pack designed to reduce breakage and support efficient handling during slide preparation. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
180 × 155 mm Mechanical X/Y Stage 75 × 75 mm Travel, Transparent Glass Plate, Ø95 mm Mounting Hole - Euromex
Benefit from precise mechanical positioning and a transparent glass plate for reliable sample observation; combine the compact 180 × 155 mm footprint with a 75 × 75 mm travel range for smooth workflow — order the NZ.9505 directly via Metav Werkzeuge or consult the advisers if required. Euromex Mechanical X/Y Stage NZ.9505 — 180 × 155 mm, 75 × 75 mm travel, transparent glass plate The NZ.9505 is a mechanical X/Y stage add-on for microscopes, designed for fine sample positioning on a compact 180 × 155 mm platform with a Ø95 mm mounting hole for attachment to the microscope table. Mechanical X/Y stage with 75 × 75 mm travel Transparent glass plate for clear sample view Ø95 mm mounting hole for microscope attachment Supplied for use with new microscope models only Precise positioning tailored to microscopy workflows The mechanical stage provides an accurate 75 × 75 mm traverse on a compact 180 × 155 mm area, enabling repeatable adjustments during inspection and preparation tasks. The combination of a geared X/Y mechanism and clearly defined travel limits minimises search time for features on specimens, which increases throughput in routine microscopy work. The transparent glass plate supports transmitted-light techniques, while the integrated Ø95 mm mounting hole ensures a secure interface with standard microscope tables. Seamless integration with modern microscope platforms Designed specifically to be supplied with newer microscope models, the stage fits directly to the microscope table via the Ø95 mm aperture, reducing installation time and alignment effort. The unit is delivered assembled as an X/Y assembly with a glass stage plate, simplifying procurement and allowing quick commissioning. Compatibility notes indicate fitment with stands marked P and S, so planning of instrument configuration is straightforward and limits downtimes associated with custom adapters. Stable handling and clearer sample observation The mechanical X/Y controls deliver smooth, controlled motion that supports delicate sample manipulation and repeatable positioning for imaging or measurement routines. The transparent glass plate ensures unobstructed transmitted illumination and a stable viewing surface for high‑contrast microscopy tasks. As a compact add-on, the stage contributes to a tidy workstation footprint while enabling precise lateral shifts without re‑clamping the specimen. Contact Metav Werkzeuge for compatibility advice and to arrange delivery from Emmerich — ask about the NZ.9505 mechanical X/Y stage and its fitment with current microscope models Technical data Article number: NZ.9505 Product type: Mechanical X/Y stage add-on Manufacturer: Euromex Label: Mechanical X/Y stage 180 × 155 mm with 75 × 75 mm travel and transparent glass plate. For Ø95 mm mounting hole. Supplied only with new microscope Facts Overall dimensions: 180 × 155 mm Travel X × Y: 75 × 75 mm Mounting hole diameter: Ø95 mm SKU/UID: NZ.9505 Special features Transparent glass plate Supplied with X/Y stage and glass plate Attachment to microscope table Compatible with stands P and S Intended for delivery with new microscope models only FAQ Is this stage compatible with older microscope models? The NZ.9505 mechanical X/Y stage from Euromex is supplied only with newer microscope models and is intended to be mounted via the Ø95 mm aperture on the microscope table. What are the exact travel and footprint dimensions? The stage offers a 75 × 75 mm X/Y travel range on a compact 180 × 155 mm platform as specified for the NZ.9505. What is included in the delivery for the NZ.9505? Delivery includes the mechanical X/Y stage complete with the transparent glass plate as stated in the product description. Can the transparent glass plate be used with transmitted‑light techniques? Yes — the transparent glass plate of the NZ.9505 permits transmitted illumination methods, supporting clearer observation of thin or translucent samples. What mounting interface does the stage use? The stage is designed for a Ø95 mm mounting hole with Ø95 mm for attachment to the microscope table, ensuring a direct and secure fit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com