High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
183mm 0.5× Auxiliary Lens for NexiusZoom Series, Compatible with P/PG/A/AP/U/B/BC/M Stands - Euromex
Take advantage of the combination of a 0.5× lens factor and a generous working distance of 183 mm to inspect larger assemblies without losing operator clearance; order the Euromex auxiliary lens directly via Metav Werkzeuge or consult our specialists for compatibility advice. Euromex 0.5× Auxiliary Lens NZ.8905 – 183 mm Working Distance for NexiusZoom The 0.5× auxiliary lens NZ.8905 is an add-on optical element for NexiusZoom stereo microscopes, designed to widen the field of view while keeping a practical working distance for inspection and assembly tasks. *0.5× lens factor for wider field of view *183 mm working distance for workspace clearance *Compatible with NexiusZoom series microscopes *Fits stands P, PG, A, AP, U, B, BC and M Inspect larger areas with fewer lens changes By integrating a 0.5× lens factor, the auxiliary lens reduces the effective system magnification to provide a noticeably broader field of view, enabling faster visual overview of components and assemblies. The maintained working distance of 183 mm gives sufficient clearance for probes, tools and handling during inspection or rework. For process engineers and quality technicians this means fewer objective swaps, shorter cycle times and a more efficient visual inspection workflow. Simple compatibility limits setup time The optical insert is tailored for the NexiusZoom range (including NexiusZoom EVO and NexiusZoom ESD) and mounts to specific stands, which simplifies ordering and reduces integration uncertainty. Compatibility with stands P, PG, A, AP, U, B, BC and M ensures straightforward fitting where these supports are already in use. The designation of incompatible support (S stands) helps avoid mismatches at the planning stage, reducing downtime and incorrect purchases. Maintain practical image quality for inspection tasks As an auxiliary lens, this element modifies overall magnification while preserving the stereo microscopy characteristics important for depth perception and manipulation under the lens. The optical change increases the observable area without compromising operator ergonomics; fine detail remains readable thanks to the lens being designed to work within the NexiusZoom optical path. This makes the accessory suitable for PCB inspection, solder-joint checks, component alignment and general assembly control where overview and accessibility are both critical. Expert advice and reliable supply for workshop use Metav’s offering combines product knowledge with dependable logistics from Emmerich: the accessory is listed with precise technical parameters to support purchasing decisions and process planning. For more complex integration questions or to confirm stand compatibility in a specific setup, technical guidance is available by e‑mail or telephone; this helps ensure the auxiliary optics are applied correctly in production or lab environments and supports a smooth transition to the revised optical configuration. For precise overview tasks requiring a wider inspection field, contact Metav Werkzeuge for tailored advice on fitting the Euromex 0.5× auxiliary lens NZ.8905 and to check compatible stand options directly. Technical data Article number: NZ.8905 Manufacturer: Euromex Product type: Auxiliary lens Label: 0.5× auxiliary lens for NexiusZoom, working distance 183 mm Specifications Working distance: 183 mm Lens factor: 0.5× SKU: NZ.8905 Compatibility & features Compatible series: NexiusZoom; NexiusZoom EVO; NexiusZoom ESD Suitable stands: P, PG, A, AP, U, B, BC, M Not suitable for: S stands Cross-selling SKUs: NZ.1702-B; NZ.1702-M; NZ.1702-P; NZ.1702-PG; NZ.1703-B; NZ.1703-M; NZ.1703-P; NZ.1703-PG; NZ.1902-B; NZ.1902-B-ESD; NZ.1902-P; NZ.1902-P-ESD; NZ.1902-PG; NZ.1903-B; NZ.1903-B-ESD; NZ.1903-M; NZ.1903-P; NZ.1903-P-ESD; NZ.1903-PG FAQ How does the 0.5× lens factor affect magnification and field of view? The 0.5× auxiliary lens halves the effective magnification of the connected objective system and increases the field of view, allowing broader inspection areas with the NexiusZoom range while retaining a working distance of 183 mm for handling and tooling. Is the lens compatible with all NexiusZoom models? The accessory is compatible with NexiusZoom, NexiusZoom EVO and NexiusZoom ESD systems; compatibility is also dependent on the stand model, so confirm that the support is one of P, PG, A, AP, U, B, BC or M. Can this lens be used on S stands? No, the accessory is not suitable for S stands; selecting a compatible stand avoids mechanical or optical mismatch during installation. Will image clarity be maintained after fitting the auxiliary lens? Yes; when fitted to a compatible NexiusZoom setup the auxiliary lens is designed to maintain stereo characteristics and provide sufficient resolution for typical inspection and assembly tasks, while increasing the overview. Are there recommended accessories or related SKUs to consider? Related items are listed under the cross-selling SKUs in the technical section and can support alternative stands or additional configurations for NexiusZoom setups. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
185 x 140mm Trinocular Microscope HWF 10x/22mm Eyepieces, Plan PLMi 5/10/20/S50 Infinity-Corrected IOS Objectives, 3W NeoLED Köhler Illumination - Euromex
Take advantage of a robust combination of trinocular observation, infinity-corrected plan PLMi optics and a rackless mechanical X–Y stage to secure reliable, repeatable material inspections; order the instrument via Metav Werkzeuge or consult the team for application advice. Euromex bScope BS.1053-PLMi trinocular microscope – infinity-corrected plan PLMi optics & NeoLED Köhler illumination The bScope BS.1053-PLMi is a trinocular microscope tailored for material science inspection and documentation, equipped with HWF 10x/22 mm eyepieces and a compact 185 × 140 mm table with an integrated rackless mechanical X–Y stage. Trinocular head for simultaneous observation and imaging HWF 10x / 22 mm eyepieces for wide field of view Infinity-corrected plan PLMi objectives (5/10/20/S50) 3 W NeoLED Köhler illumination with integrated power Precision optics for reliable, reproducible imaging The optical concept centres on infinity-corrected plan PLMi objectives, which deliver flat, corrected fields across common magnifications (5×, 10×, 20× and S50). This design reduces optical aberrations and simplifies the addition of intermediate optical components such as cameras or filters. With HWF 10x / 22 mm eyepieces the instrument provides a generous field number for comfortable sample navigation; the result is consistent image quality that supports repeatable measurements and comparability between sessions. Built for material science workflows and documentation A trinocular head allows parallel observation and image capture, making the system suitable for metallography, failure analysis and materials research where both human inspection and digital records are required. The four-position objective turret reduces changeover time between magnifications while the infinity-corrected optics enable straightforward integration of imaging accessories without refocusing the optical train, improving throughput in routine laboratory workflows. Mechanical stability and stage control that support accuracy The compact work surface (185 × 140 mm) combined with an integrated rackless X–Y mechanical stage offering 74 × 48 mm travel provides precise sample positioning without backlash. This mechanical arrangement minimises drift during observation and helps to maintain a steady reference point for measurements and photomontage. The 4× objective revolving nosepiece supports quick magnification changes while preserving optical alignment. Consistent illumination for contrast and detail recovery Lighting is provided by a 3 W NeoLED Köhler illumination system with an integrated power supply, designed to deliver uniform, stable light and good colour rendition for metallurgical and materials specimens. Köhler alignment separates the illumination and imaging planes, which improves contrast and enables clear visualisation of surface features, grain boundaries and microstructural details that are critical for analysis. Integration, usability and maintenance considerations The instrument’s layout emphasises straightforward operation and low maintenance: durable mechanical components, an accessible illumination module and standard eyepiece and objective interfaces. The optical and mechanical choices focus on long-term stability and ease of integration into existing laboratory setups, while the trinocular configuration supports both observational and digital documentation tasks without compromising ergonomics. Choose the Euromex bScope BS.1053-PLMi for dependable material inspection with a proven optical platform; contact Metav Werkzeuge for tailored advice and supply from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical Data SKU: BS.1053-PLMi Model series: bScope Manufacturer: Euromex Product type: Microscope Microscope head: Trinocular Core specifications Eyepiece magnification: 10x Eyepiece field number: 22 mm Objective turret: 4× revolving Table size: 185 × 140 mm Mechanical stage travel: 74 × 48 mm Features and optics Plan PLMi objectives: 5× / 10× / 20× / S50 Infinity-corrected optics (IOS) Rackless X–Y mechanical stage 3 W NeoLED Köhler illumination Integrated power supply Supplied without batteries FAQ What applications is this microscope suited for? The Euromex bScope BS.1053-PLMi is suitable for material science tasks such as metallography, quality control and failure analysis where high-contrast imaging and documentation are required. Which eyepieces and objectives are supplied with the instrument? The system includes HWF 10x / 22 mm eyepieces and a plan PLMi objective set in a 4-position turret (5×, 10×, 20×, S50) as specified for the BS.1053-PLMi. Does the illumination support Köhler alignment? Yes, the BS.1053-PLMi is equipped with a 3 W NeoLED Köhler illumination system, providing uniform lighting and improved contrast for microstructural inspection. Can the trinocular head be used for camera attachment? The trinocular configuration permits simultaneous visual observation and imaging; camera adapters and exact interface specifications should be matched to the imaging device used with the bScope BS.1053-PLMi. What is included and what is not supplied with the microscope? The instrument is supplied with eyepieces, the plan PLMi objectives in the 4× turret, the mechanical stage and the integrated illumination/power module; the BS.1053-PLMi is supplied without batteries. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
185mm X-Y Stage 50 x 50 mm Travel Precision Object Table, DZ-Series - Euromex
Compact 185 x 145 mm table with 50 x 50 mm travel delivers fine sample positioning; compatible with DZ-series platforms. Order the stage directly via Metav Werkzeuge or ask our consultants for integration support. X-Y stage 185 x 145 mm for DZ-series (50 x 50 mm travel) — Euromex object stage The X-Y stage 185 x 145 mm for DZ-series is an object stage intended for precise horizontal positioning in microscope and inspection setups, offering a compact footprint and controlled 50 x 50 mm travel for repeatable alignment. Compact 185 x 145 mm table 50 x 50 mm precise X–Y travel Designed for DZ-series integration Precise horizontal positioning for routine inspection The compact X-Y stage combines a modest footprint with a clearly defined movement range, enabling repeatable alignment of specimens and components. The 185 x 145 mm table provides a stable support area while the 50 x 50 mm travel gives controlled, micrometre-scale adjustment across both axes. For users new to translation stages, the travel range denotes the maximum lateral movement available in X and Y; this allows small samples to be scanned or centred under an optical axis without relocating the microscope. The measured travel and table dimensions make the stage suitable for benchtop inspection where space is limited but positional control is required. Smooth system integration reduces setup time Compatibility with the DZ-series simplifies retrofitting and system upgrades: the stage is engineered to match DZ-series mounts and accessories, reducing the need for custom adapters. Where workflow continuity matters, fitting a purpose-aligned object stage into an existing stand cuts installation effort and downtime. Related accessories and mounting options are available as complementary items (see the listed SKUs for matching components), enabling a coordinated setup that supports repeatable measurements and visual inspection processes. Practical procurement and dependable supply for workshops Sourcing this object stage through an established distributor ensures steady availability and streamlined procurement. Metav’s distribution approach acts as a quality filter for the European market, combining a broad catalogue with reliable logistics from Emmerich. The supply model supports workshop planning by reducing supplier count and centralising fulfilment, while established inventory and distribution practices minimise unexpected delays. For teams seeking straightforward procurement of precision components, the combination of compatible DZ-series parts and a trusted supplier network helps maintain continuous production and inspection capability. Contact Metav Werkzeuge GmbH to discuss integration options for the Euromex object stage and to confirm compatibility with existing DZ-series equipment: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: DZ.9020 Label: X-Y stage 185 x 145 mm for DZ-series with 50 x 50 mm travel Manufacturer: Euromex Product type: Object stage Model series: DZ-series UID: DZ.9020 Cross-selling SKUs: DZ.1100; DZ.1105; DZ.1600; DZ.1605; DZ.1800; DZ.1805 Facts Table dimensions: 185 x 145 mm (L x W) Travel range: 50 x 50 mm (X x Y) Special features Application: object stage for specimen positioning and inspection Designed for DZ-series integration Related accessories: DZ.1100; DZ.1105; DZ.1600; DZ.1605; DZ.1800; DZ.1805 FAQ What are the table dimensions of the stage? The table measures 185 x 145 mm; this is stated in the product label for the X-Y stage. What travel range does the stage provide? The stage offers a 50 x 50 mm travel range in X and Y for controlled lateral adjustment of specimens. Is the stage compatible with existing DZ-series stands? Yes, the stage is designed for integration with the DZ-series and related mounts. Which accessories are recommended for use with this stage? Related components include SKUs DZ.1100; DZ.1105; DZ.1600; DZ.1605; DZ.1800; DZ.1805, which support DZ-series configurations. What is the product type and intended application? This item is an object stage intended for specimen positioning in microscopy and inspection workflows (SKU DZ.9020). Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
1920×1080 2.0MP High-Speed Colour HD Mini Camera HDMI Output Standalone 4GB SD - Euromex
Combining a high-speed CMOS sensor with Full HD (1920 × 1080) capture and native HDMI output delivers clear, reliable imaging for inspection and documentation; the unit’s standalone operation with an included 4 GB SD card simplifies data capture and storage. Order the HD Mini Camera VC.3023 directly via Metav Werkzeuge or consult our specialists for integration advice. HD Mini Camera VC.3023 — Euromex digital camera / digital microscope, 2.0 MP, HDMI The HD Mini Camera VC.3023 is a compact digital camera and microscope imaging module designed for clear colour imaging, live HDMI output and independent recording in workshop and laboratory environments. Compact 2.0 MP high-speed CMOS sensor Full HD 1920 × 1080 capture via HDMI Standalone operation with 4 GB SD card Mouse-controlled recording software included Reliable Full HD imaging for inspection and records The compact imaging module delivers Full HD (1920 × 1080) stills and video with a 2.0 MP sensor, producing sharp colour images suitable for inspection, documentation and basic measurement tasks. The high-speed CMOS sensor reduces motion artefacts and preserves detail at typical magnifications used in visual inspection and teaching. This capability enables consistent visual records for quality control and traceability without complex PC setups. Smooth live output and easy integration with existing displays With a native HDMI output, the camera provides low-latency live video to standard monitors and capture devices, supporting direct integration into inspection benches or classroom displays. The digital video output ensures compatible connection to HDMI-equipped microscopes, displays or recorders, avoiding conversion losses. The interface supports fast live feeds for real-time assessment and rapid decision-making on the production floor. Simple, standalone recording and user-friendly control Designed for immediate use, the unit supports standalone operation with a standard 4 GB SD card for local storage and ships with mouse-controlled recording software for straightforward capture, playback and file management. The software control via a pointing device keeps workflows simple and reduces setup time, making the system a practical choice for bench testing, routine documentation or portable inspection tasks. Built for workshop and small-lab workflows As a compact imaging solution, the camera balances portability with dependable performance, making it suitable for workshop benches, training rooms and small laboratories where a full PC workstation is impractical. The combination of HDMI output, local recording and a responsive sensor forms a pragmatic solution for routine visual inspection and documentation, improving throughput and ensuring consistent image quality. Contact Metav Werkzeuge today to discuss how the Euromex HD Mini Camera VC.3023 can be integrated into existing inspection setups or to request tailored advice; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: VC.3023 Product type: Digital camera / Digital microscope Manufacturer: Euromex Model description: HD mini camera, colour high-resolution, standalone operation, 4 GB SD card included, HDMI output, integrated mouse-controlled recording software Core technical data Resolution: 1920 × 1080 pixels Sensor: High-speed CMOS, 2.0 MP Storage: Standard 4 GB SD card included Interface: HDMI output Special features Standalone recording capability Integrated mouse-controlled recording software Colour, high-resolution imaging suitable for inspection and documentation FAQ What resolution and sensor does the camera use? The Euromex HD Mini Camera VC.3023 uses a high-speed CMOS sensor with a native 1920 × 1080 pixel output (2.0 MP), optimised for sharp colour imaging. Can the camera record without a PC? Yes — the camera supports standalone operation and records directly to a standard 4 GB SD card, enabling capture without a permanent PC connection. Which output is provided for live viewing? Live video is provided via the HDMI output, allowing connection to HDMI-ready monitors and recorders for low-latency real-time display. Is software supplied for recording and control? Mouse-controlled recording software is included with the unit, enabling simple capture, playback and file management without complex configuration. Is the camera suitable for workshop and teaching environments? The VC.3023 is designed as a compact imaging solution for benches, small labs and teaching use, offering straightforward integration and dependable Full HD imaging. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
1in C-Mount Adapter 1x Magnification for 1in Sensor Cameras - Euromex
The sturdy C‑mount connection and 1× optical coupling combine for dependable imaging compatibility with 1‑inch sensor cameras; precision mounting for the BS.4xxxx series supports consistent inspection and documentation. Order or request advice directly via Metav Werkzeuge for a reliable supply and integration plan. C‑Mount Adapter BS.9810 — 1× magnification for 1‑inch sensor cameras (Euromex) The C‑Mount Adapter BS.9810 is a dedicated mounting adaptor that provides a 1× optical interface for 1‑inch sensor cameras, designed to mate with the BS.4xxxx series imaging systems for laboratory and industrial visual inspection. C‑mount interface, standard industrial mount 1× magnification for true focal length Optimised for 1‑inch sensor cameras Compatible with BS.4xxxx series Consistent image scale for accurate measurement and documentation The adaptor preserves the original imaging geometry by offering a 1× optical coupling; this means the sensor records the scene at its native scale rather than introducing additional magnification or reduction. For metrology and quality control, that preservation of scale simplifies calibration and measurement workflows. The C‑mount interface is an established industry standard, so the connection maintains repeatable axial alignment and secure fixation for routine inspection tasks. Smooth integration into existing camera and microscope setups Designed specifically for 1‑inch sensor cameras, the adaptor ensures full sensor coverage without vignetting when used with appropriately matched optics. Compatibility with the BS.4xxxx series allows straightforward mechanical and optical interfacing with systems in microscopy and industrial imaging. The standardised mount reduces setup time and limits the need for additional spacers or optical corrections, which supports faster deployment in production or laboratory environments. Practical choice for workshops and inspection benches that need reproducible results As a compact mounting solution, the adaptor supports reproducible imaging conditions and steadier documentation across repeated inspections. Its simple function—maintaining the sensor’s native field of view via a 1× coupling—helps technicians and engineers achieve consistent results without complex optical adjustments. If clarification on fitment or integration is required, Metav Werkzeuge provides specification support and sourcing advice to ensure the adaptor meets the intended application and inspection requirements; email info@metav-werkzeuge.com or call +49 2822 7131930 for further information. Contact Metav Werkzeuge to confirm compatibility and integration for the C‑Mount Adapter BS.9810; consultants at Metav Werkzeuge can advise on system matching and supply directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BS.9810 Product type: Adapter Description: C‑mount adapter, 1× magnification for 1‑inch sensor cameras Facts Magnification: 1× Sensor compatibility: 1‑inch Applicable series: BS.4xxxx series SKU: BS.9810 Special features C‑mount interface Compatibility with BS.4xxxx series Optimised for 1‑inch sensor cameras Manufacturer: Euromex FAQ What does 1× magnification mean for image capture? The 1× specification indicates that the adaptor does not change the image scale; the camera sensor captures the scene at its native size when used with matching optics and focus settings. Will the adaptor fit cameras other than 1‑inch sensor models? The adaptor is optimised for 1‑inch sensor cameras; using significantly larger or smaller sensors may result in vignetting or reduced field coverage unless compensated by compatible optics. Is the adaptor suitable for the BS.4xxxx series microscope cameras? Yes; the adaptor is intended for interfacing with the BS.4xxxx series imaging systems and provides the standard C‑mount connection required for those setups. Does the adaptor alter focal distance or require optical correction? The adaptor provides a direct mechanical connection and preserves focal relationships at 1×; additional optical correction is normally unnecessary unless the optical train or objectives specify a different tube length. How does the adaptor support repeatable inspection procedures? By maintaining consistent mechanical alignment and native sensor coverage, the adaptor helps standardise the imaging chain, which supports reproducible measurement and documentation in inspection processes. Manufacturer / Responsible: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
1in C-Mount Adapter for Zeiss PrimoStar 3 Microscopes, 1in Mount - Euromex
Taking advantage of a direct C‑mount interface and native compatibility with the Zeiss PrimoStar 3, this adapter enables reliable digital imaging with 1‑inch C‑mount cameras and streamlines routine documentation. Order the adapter directly via Metav Werkzeuge or consult the Metav team for compatibility advice and procurement. C‑Mount adapter AE.9810‑ZP3 for Zeiss PrimoStar 3 and 1‑inch C‑mount cameras The C‑Mount adapter AE.9810‑ZP3 provides a compact mechanical interface to connect the Zeiss PrimoStar 3 microscope to 1‑inch C‑mount cameras, intended for laboratory imaging and classroom documentation Direct fit for Zeiss PrimoStar 3 Supports 1‑inch C‑mount cameras Stable mechanical connection for imaging Supplied as AE.9810‑ZP3 SKU Reliable digital imaging from microscope to camera The adapter establishes a direct connection between the microscope and camera, preserving the optical path required for accurate capture with 1‑inch sensors. By supporting the Zeiss PrimoStar 3 optical geometry, the interface enables consistent exposure and framing for routine capture tasks. This results in a predictable imaging chain that reduces time spent on alignment and repeat adjustments, improving throughput in documentation tasks and specimen archiving. The emphasis is on mechanical compatibility and reliable transfer of the microscope image to a C‑mount camera sensor. Optimised workflow for labs and teaching environments Integrating a camera into a teaching microscope can complicate workflow unless the mechanical interface is straightforward. The adapter reduces setup complexity by providing a standardised mounting solution that fits established C‑mount camera systems. This simplifies session preparation in teaching labs, speeds up image capture during practicals and supports reproducible results for regular inspection or comparative studies. The result is less interruption to laboratory routines and a smoother handover between microscopy and digital image processing. Straightforward integration and practical considerations Installation is designed for quick mechanical coupling to the microscope and camera, maintaining optical alignment without additional adapters in most setups. The compact interface supports routine handling in busy lab environments and is compatible with cameras that follow the 1‑inch C‑mount standard. For users requiring detailed camera or microscope compatibility checks, supplementary technical data can be provided on request to ensure the chosen camera sensor and the optical configuration meet the intended application. For precise microscope-to-camera integration and procurement of the AE.9810‑ZP3 C‑mount adapter, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and reliable supply Technical data Article number: AE.9810‑ZP3 Description: C‑Mount adapter for Zeiss PrimoStar 3 microscope and 1‑inch C‑mount cameras Product type: Adapter UID: AE.9810‑ZP3 Core data Camera sensor support: 1 inch Compatible microscope: Zeiss PrimoStar 3 Interface: C‑mount Special features C‑mount mechanical interface Designed for microscope-to-camera imaging Suitable for 1‑inch C‑mount cameras FAQ Is this adapter compatible with the Zeiss PrimoStar 3 microscope? Yes. The C‑mount adapter AE.9810‑ZP3 is made to interface with the Zeiss PrimoStar 3, providing a standard mechanical connection for imaging with compatible C‑mount cameras. Can the adapter be used with 1‑inch C‑mount cameras from other manufacturers? Yes. The adapter supports 1‑inch C‑mount cameras that conform to the standard mechanical and sensor specifications, enabling cross-brand camera use with the microscope. Will the adapter affect image quality or field of view? When used as intended, the adapter maintains the microscope optical path and provides a stable mount for the camera; image quality and field of view are primarily determined by the microscope optics and the camera sensor characteristics. Is additional hardware required to attach the camera to the adapter? In most cases the adapter mounts directly to the microscope and to C‑mount cameras without extra parts; specific camera models or accessory configurations may require additional spacers or adapters—consult technical documentation if unsure. What is the article number for ordering? The SKU for ordering is AE.9810‑ZP3 and it is listed as the C‑Mount adapter for Zeiss PrimoStar 3 and 1‑inch C‑mount cameras Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
1x 395nm Flexible Gooseneck LED Light Guide Replaceable Self‑Supporting, Violet LED - Euromex
Benefit from the combination of an interchangeable, self‑supporting gooseneck and a 395 nm high‑power violet LED to achieve consistent, targeted illumination for inspection tasks; order the replacement part directly via Metav Werkzeuge or consult the Metav specialists if clarification on connector versions is required. Interchangeable Self‑Supporting Gooseneck Light Guide LE.5262 – 395 nm high‑power violet LED, Euromex compatible The Interchangeable Self‑Supporting Gooseneck Light Guide provides focused violet illumination for precision visual inspection and integration with Euromex microscope and inspection assemblies NZ.9018, LE.5207 or LE.5212 Interchangeable self‑supporting gooseneck 395 nm high‑power violet LED illumination Compatible with NZ.9018, LE.5207, LE.5212 Check connector version before replacement Focused violet illumination for precise inspection results The gooseneck light guide delivers 395 nm violet LED light in a compact, directional beam designed to assist visual inspection where concentrated short‑wave visible/violet illumination is required. The interchangeable design keeps replacement straightforward and reduces downtime compared with fixed lamp units. In practice, concentrated violet lighting can improve visual contrast on treated surfaces and in tasks requiring clear local lighting; the lamp module mounts as a single‑piece accessory and is intended to be integrated into existing illumination setups where the exact wavelength and beam direction are decisive for workpiece visibility. Flexible mounting and straightforward replacement to maintain uptime A self‑supporting gooseneck affords rapid positioning without additional brackets, while the interchangeable connection simplifies service procedures. Euromex documents both current and earlier plug variants; therefore, connector compatibility should be verified prior to installation to ensure a correct fit. The unit is supplied as a single piece per set and is designed for straightforward replacement in compatible Euromex fixtures, reducing mechanical adjustments and enabling quick restoration of controlled local lighting when a fault or upgrade is needed. Compatibility and workshop considerations for integration Compatibility with Euromex models NZ.9018, LE.5207 and LE.5212 ensures this light guide can be used across several inspection and optical assemblies, supporting standardisation of spare parts within a workshop. The compact gooseneck form factor allows close‑range illumination without obstructing access to the work area, and the dedicated 395 nm emitter provides a clearly defined spectral characteristic for consistent results. For complex applications or to confirm fitment with earlier connector types, cross‑reference the listed compatible articles and the Euromex connector notes before ordering. For a reliable replacement and expert advice on connector versions, contact Metav Werkzeuge to arrange supply of the Euromex LE.5262 gooseneck light guide – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: LE.5262 Product type: LED gooseneck light guide Manufacturer: Euromex Item description: Interchangeable, self‑supporting gooseneck light guide with 395 nm high‑power violet LED Pieces per set: 1 UID: LE.5262 Facts Wavelength: 395 nm LED lighting: yes Pieces per set: 1 Special features Interchangeable, self‑supporting gooseneck Compatible with NZ.9018; LE.5207; LE.5212 Euromex shows current and earlier plug versions — compare connector before replacement FAQ What wavelength does this light guide emit? The light guide emits 395 nm violet light; the LE.5262 is specified for consistent short‑wave violet illumination. Which Euromex models are compatible with this item? Compatibility is listed for NZ.9018, LE.5207 and LE.5212; the LE.5262 is intended as a replacement accessory for those assemblies. Is the gooseneck easy to replace in the field? The unit is supplied as an interchangeable, self‑supporting gooseneck and is designed for straightforward replacement, subject to connector compatibility. Are there special connector considerations to be aware of? Yes. Euromex documents current and earlier plug versions; compare the connector type of the existing assembly with the replacement before installation. Can this light guide be used for close‑range inspection tasks? The compact gooseneck design provides directional, localised violet illumination suitable for close‑range inspection and precision visual tasks. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
1x C-Mount Adapter for Standard Head, 1x Magnification - Euromex
Take advantage of a precise C‑mount interface and 1x optical coupling for reliable camera integration with standard microscope heads; this compact adapter simplifies alignment and reduces setup time. Order the component directly via Metav Werkzeuge or consult the Metav specialists for configuration advice. Euromex C‑Mount Adapter 1x for Standard Microscope Head C‑Mount Adapter 1x for Standard Head provides a straightforward C‑mount interface to attach cameras to standard microscope heads, designed for consistent imaging and simplified optical alignment in inspection and documentation applications. Precision C‑mount interface for camera integration Maintains 1x optical coupling for accurate imaging Compatible with standard microscope heads Consistent mounting for repeatable imaging results A compact adapter that secures the camera to the microscope head, ensuring a stable mechanical connection and consistent optical alignment for repeated measurements. The integrated C‑mount interface preserves the intended imaging geometry so that magnification and field of view remain predictable. This stability reduces the need for frequent recalibration during batch inspections and supports reliable documentation workflows. Faster setup and predictable image scaling for inspections By preserving the optical train at 1x magnification, the adapter helps maintain a repeatable scale across captures, which benefits measurement comparability and automated image processing. Integration with existing camera systems is streamlined, enabling quicker transitions between visual inspection, photodocumentation and metrology tasks. The result is improved throughput and fewer alignment-related delays in routine quality control. Broad compatibility with standard heads and dependable supply Engineered for compatibility with standard microscope heads, the adapter simplifies inventory and system design by avoiding bespoke fittings. The solution supports a wide range of inspection tasks where consistent camera mounting is required. Metav Werkzeuge’s distribution and product range further contribute to availability and selection reliability, reinforcing the adapter’s role in a pragmatic, low-risk imaging setup. For reliable camera-to-head integration with standard microscope systems, request the Euromex C‑Mount Adapter 1x via Metav Werkzeuge or speak with their specialists at info@metav-werkzeuge.com / +49 2822 7131930 to confirm compatibility and supply options. Technical data Article number: AX.9810 Name: C‑Mount Adapter 1x for Standard Head Product type: Microscope head accessory Specifications No measurable technical specifications provided Compatibility and features C‑mount interface 1x optical coupling Fits standard microscope heads FAQ What cameras are compatible with this adapter? The adapter uses a standard C‑mount interface, so it is compatible with C‑mount cameras and camera converters specified for the C‑mount Adapter 1x for Standard Head. Does the adapter change the effective magnification of the microscope? The adapter preserves a 1x optical coupling, maintaining the intended image scale rather than introducing additional magnification. Is any additional hardware required to attach the camera? Attachment requires a camera with a C‑mount thread; the adapter provides the standard interface for the C‑mount Adapter 1x for Standard Head to mate with typical C‑mount cameras. Can the adapter be used for photodocumentation and metrology tasks? Yes, the stable connection and preserved optical geometry support photodocumentation and tasks where repeatable image scale is important. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
1x Projection Objective C-Mount, Single Magnification - Euromex
Take advantage of a compact 1x projection optic with standard C‑mount compatibility that integrates smoothly into camera-based imaging chains; the lens delivers straightforward projection functionality with precision optical assembly — order via Metav Werkzeuge or ask the Metav consultants for integration advice and compatibility checks. Projection 1x lens with C‑mount (DC.1320) — Euromex projection lens The Projection 1x lens with C‑mount is a 1x projection lens engineered for camera coupling via a standard C‑mount, intended for projection and image capture in laboratory, inspection and documentation setups. 1x projection lens C‑mount for standard cameras Precision optical construction Ideal for projection and imaging Reliable camera coupling for clear projection results The optic offers a C‑mount interface that simplifies mechanical and optical connection to standard industrial and scientific cameras. With the C‑mount connection, camera alignment and secure mounting are straightforward, which supports consistent image projection and repeatable results. The compact format promotes easy integration into existing rigs or documentation chains while the optical build maintains precision for routine inspection and projection tasks. Streamlined imaging workflow for inspection and documentation Designed as a projection component, the lens supports workflows where camera-based capture or projection is required. The 1x specification indicates a neutral projection factor suitable for direct imaging or for use with sensor-coupled projection systems. In practical terms this means fewer adjustments when pairing the optic with typical camera sensors, leading to reduced setup time and reliable visual records for quality assurance or training materials. Mechanical and optical design that aids integration The construction focuses on straightforward mounting and optical alignment. The mechanical interface adheres to the widespread C‑mount standard, which reduces the need for adapters and helps standardise instrument setups across multiple workstations. The optical assembly is arranged for stable projection geometry, aiding repeatability in measurement-adjacent visual checks and simplifying calibration procedures in inspection environments. Practical application guidance and compatibility notes As a projection lens, the unit is suitable wherever a C‑mount camera is used for imaging, projection or documentation. The optic serves well in lab benches, inspection stations and teaching rigs that rely on camera capture and projected output. For installations where sensor size, working distance or field of view must be matched precisely, consult the technical specialists to ensure optimal pairing with the chosen camera and projection path. Contact Metav Werkzeuge for tailored integration advice on the Euromex Projection 1x lens with C‑mount (DC.1320) and to confirm suitability for specific camera or inspection setups. Technical data Article number: DC.1320 Label: Projection 1x lens with C‑mount Product type: Lens Manufacturer: Euromex Core specifications No numerical data provided Materials and features C‑mount connection 1x projection lens Euromex optical component FAQ What magnification does this lens provide? The lens is specified as a 1x projection optic and therefore provides neutral projection suitable for direct imaging and projection setups. Is the lens compatible with standard industrial cameras? Yes — the C‑mount interface is compatible with standard C‑mount cameras and simplifies mechanical coupling to common sensor formats. Can this optic be used for inspection and documentation tasks? The projection optic is intended for projection, imaging and documentation applications where a C‑mount camera is in use; it supports routine inspection workflows and visual record capture. What is the manufacturer and SKU of this product? This component is supplied by Euromex and is listed under SKU DC.1320. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
2 Pair Stage Clips For StereoBlue Microscope Stage Mounting - Euromex
Take advantage of a straightforward solution for reliable slide fixation: the two-piece set provides secure stage clamping and simple reordering via SKU SB.9570, enabling uninterrupted microscopy work. Order directly through Metav Werkzeuge or consult the Metav team for suitability and compatibility guidance. Pair of Specimen Clamps SB.9570 – Stage clips for StereoBlue series (Euromex) Pair of Specimen Clamps SB.9570 is stage clips designed to hold microscope slides securely on the object stage, suitable for routine laboratory and educational use Pair of stage clips for microscope stage Compatible with StereoBlue series Two-piece set for standard slide fixation SKU SB.9570 for easy reordering Secure fixation for steady imaging The two-piece set offers a simple mechanical solution for preventing slide movement during examination. By clamping specimens at opposing edges, the clips ensure secure fixation and support precise positioning of slides on the object stage. For users who require repeatable results—such as teaching labs and routine inspections—this reduces image drift and the need for frequent readjustment, improving throughput and consistency in daily workflows. Fast compatibility with StereoBlue instruments Designed with the StereoBlue series in mind, these stage clips integrate into compatible stages without complex adaptors. The design focuses on reliable engagement rather than added features, enabling quick installation and straightforward replacement when necessary. Fewer interruptions for repositioning translate into smoother sessions at the bench and less time wasted on routine handling, delivering a clear operational benefit to procurement and workshop teams. Practical procurement and trusted supply chain As a compact accessory, the clamps simplify inventory and spare-part management: the clear SKU (SB.9570) makes reordering efficient and the product works alongside related items such as other stage accessories. Backed by Metav’s commitment to accessible precision, customers benefit from a consistent supply channel and product selection suited to workshops and educational facilities. For further technical clarification or compatibility checks, Metav’s documentation can be consulted to support procurement decisions. For reliable slide fixation and fast procurement of SB.9570, contact Metav Werkzeuge for ordering and advice—Metav’s team will assist with suitability and delivery options Technical Data Article number: SB.9570 Description: Pair of specimen clamps for the object stage Product type: Stage clips / specimen clamps Brand: Euromex Pieces per set: 2 Facts Pieces per set: 2 Special features Compatibility: StereoBlue series Cross-selling SKUs: SB.1302; SB.1302-P; SB.1402; SB.1402-P; SB.1702; SB.1702-P; SB.1703; SB.1703-P; SB.1902; SB.1902-P; SB.1903; SB.1903-P; SB.3903; SB.3903-P Intended use: Slide fixation on the object stage FAQ What is included in the SB.9570 set? The set contains two specimen clamps (stage clips) supplied as a matched pair for the object stage and identified by SKU SB.9570 from Euromex. Are these clamps compatible with StereoBlue microscopes? Yes, the stage clips are specified for compatibility with the StereoBlue series and are intended to fit the corresponding object stage design. How do the clamps hold a slide in place? The clamps apply gentle opposing pressure at the slide edges to prevent movement, enabling stable positioning for observation and imaging without requiring additional fixtures. Are these stage clips suitable for educational or routine laboratory use? The design is geared towards routine slide fixation tasks in teaching and inspection settings, offering dependable performance for repeated daily use. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
2 Pcs Eyecups For StereoBlue Compatible Series - Euromex
Take advantage of straightforward replacement, clear compatibility with StereoBlue series and a compact two-piece supply for uninterrupted inspection workflows. Order the eyecups directly via Metav Werkzeuge or ask our consultants for application advice. SB.6099 – Pair of eyecups for StereoBlue microscope (Euromex) SB.6099 is a replacement pair of eyecups designed for the StereoBlue series, intended to improve viewing comfort and reduce stray light during extended observation sessions. Pair of eyecups for StereoBlue microscopes Soft-contact design for extended use comfort Simple replacement for standard eyepieces Compatible with multiple StereoBlue models Improved observation consistency and reduced stray light The supplied pair of eyecups is designed to support stable head positioning and minimise ambient light intrusion, which helps preserve contrast and image clarity during inspections. By maintaining a consistent viewing geometry, the accessories contribute to reliable visual assessments and repeatable observation conditions. These benefits are particularly relevant in quality control, assembly and laboratory environments where even small variations in viewing angle can affect inspection outcomes. The connection to the StereoBlue optical assembly ensures maintained alignment between eyepiece and objective, supporting more precise observation over longer periods. Quick replacement and straightforward fitment for workshop efficiency Supplied as a two-piece set, the eyecups offer a direct replacement option for StereoBlue ocular housings and are intended to be a fast, low-effort swap that restores original ergonomics. Minimal downtime is required: the design supports uncomplicated removal of worn eyecups and insertion of the new components, allowing technicians to resume work without specialist tools. The compact packaging and simple fitment reduce service interruptions in production and inspection routines, which in turn supports continuous throughput and predictable scheduling on the shop floor. Practical compatibility and useful pairing suggestions These eyecups are specified for the StereoBlue series and are listed under SKU SB.6099, making them easy to locate for maintenance or spare-parts planning. Where workshop inventories are being consolidated, the product pairs naturally with related accessories and replacement parts commonly used in stereo microscopy; relevant cross-sell items are available for streamlined procurement. For procurement teams and technical managers, choosing the correct eyecup set ensures ergonomic benefits for operators and helps maintain a consistent inspection standard across instruments of the same series. Reliability through recognised supply and distribution Sourced under the Euromex designation and distributed via Metav’s supply channel, these eyecups form part of a broader strategy to keep precision tools accessible. Metav combines a wide product range with reliable logistics from its Emmerich location, which supports predictable restocking and reduces procurement complexity. The focus on dependable supply and accessible replacement parts helps businesses avoid extended equipment downtime and supports sustained inspection quality in workshops and laboratories. Contact Metav Werkzeuge for availability and tailored advice on the Euromex SB.6099 eyecup pair, supplied from Emmerich to meet workshop requirements. Technical Data Article number: SB.6099 Item: Pair of eyecups Brand: Euromex Compatible with: StereoBlue Pack contents: 2 eyecups Facts Pieces per set: 2 SKU / UID: SB.6099 Compatibility & Accessories Cross-selling SKUs: SB.1302;SB.1302-P;SB.1402;SB.1402-P;SB.1702;SB.1702-B;SB.1702-P;SB.1702-U;SB.1703;SB.1703-B;SB.1703-P;SB.1703-U;SB.1902;SB.1902-B;SB.1902-P;SB.1902-U;SB.1903;SB.1903-B;SB.1903-P;SB.1903-U;SB.3903;SB.3903-P FAQ Are these eyecups compatible with all StereoBlue models? The eyecups are specified for the StereoBlue series; compatibility is generally expected across the series but depends on the eyepiece housing used in the microscope model. How many eyecups are supplied in one set? One set contains two eyecups, supplied under SKU SB.6099 for convenient replacement of both ocular positions. Is SB.6099 a direct replacement or is modification required? SB.6099 is intended as a direct replacement for worn eyecups on StereoBlue instruments and is designed for straightforward fitment without modification. Will these eyecups improve user comfort during long inspections? The eyecups are designed to support consistent head positioning and reduce ambient light, which helps improve operator comfort during extended observation periods. Can the eyecups be cleaned with standard optical cleaning agents? Cleaning methods vary by material; the product description for SB.6099 does not specify a material, so follow the microscope manufacturer’s cleaning recommendations for ocular accessories. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
2 Slide Shipping Container 2-Slot Capacity Blue Polypropylene - Globe Scientific
Combine compact capacity for two slides with robust polypropylene construction and bulk packaging options to simplify laboratory logistics and routine handling. Order the Slide transport container directly via Metav Werkzeuge or consult our specialists for tailored supply and delivery from Emmerich. Slide transport container 513041B — polypropylene, blue, 2‑slide capacity (Globe Scientific) The Slide transport container 513041B provides secure, hygienic transport and convenient short‑term storage for microscope slides in laboratory and clinical workflows. Durable polypropylene (PP) construction Holds two microscope slides Blue colour for easy identification Available in packs of 100 or 1,000 Secure, hygienic transport for delicate slides The Slide transport container delivers a compact solution for moving and storing microscope slides. Constructed from polypropylene (PP), the carrier offers a balance of chemical resilience and dimensional stability customary for laboratory consumables. The internal layout secures the slide edges during transit, reducing the risk of breakage or contamination while the blue colour supports rapid visual identification on busy benches. This physical protection and clear material choice support reproducible handling during sample transfer between workstations. Organised stock and efficient replenishment for busy labs Bulk packaging choices—packs of 100 or 1,000—allow straightforward stock management and minimise procurement frequency. The container is supplied under SKU 513041B, enabling quick reordering and clear inventory control. For purchasing departments and storekeepers, the compact dimensions and consistent labelling simplify shelving and picking processes, contributing to uninterrupted workflows and predictable replenishment cycles without compromising on storage density. Easy integration into microscopy workflows and routine handling Designed for routine laboratory use, the carrier suits standard slide formats and provides simple labelling opportunities for sample tracking. The material and shape allow for straightforward handling during sample exchange and short‑term storage prior to analysis or dispatch. By keeping slides organised and protected, the container helps maintain sample integrity between collection and examination, supporting reliable results and efficient day‑to‑day operations. Contact Metav Werkzeuge today for dependable supply of Globe Scientific Slide transport containers — orders and bulk logistics are handled from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange delivery and advice Technical data Article number: 513041B Product name: Slide transport container 513041B Product type: Slide transport container Manufacturer: Globe Scientific Facts Capacity: 2 slides Packaging unit: 100 or 1,000 pieces SKU: 513041B Special features Material: Polypropylene (PP) Colour: Blue Intended use: Transport and storage of microscope slides FAQ What capacity does the slide carrier have? The Slide transport container 513041B is designed to hold two microscope slides securely during transport and short‑term storage. What material is the container made from? The container is manufactured from polypropylene (PP), a standard laboratory plastic used for durability and chemical resistance in Globe Scientific slide carriers. In which packaging units is the product supplied? The Slide transport container 513041B is available in packs of 100 or 1,000 pieces to support bulk procurement and inventory management. Is the carrier suitable for routine lab transport between workstations? Yes, the Globe Scientific slide transport container 513041B is intended for routine transport and handling of standard microscope slides within laboratory and clinical environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 Slide Shipping Container Cardboard Capacity 2 Slides - Globe Scientific
Compact, recyclable cardboard construction and a secure capacity for two slides make this shipping container an economical choice for routine laboratory mailing and storage; available in pack sizes of 100 or 1000 for efficient logistics. Order via Metav Werkzeuge or consult our specialists for procurement and handling advice. Slide shipping container for 2 slides 513002 — Cardboard slide shipping container by Globe Scientific Slide shipping container for 2 slides 513002 is a compact cardboard carrier designed for secure mailing and short-term storage of microscope slides in laboratory, clinic and teaching environments. *Compact cardboard construction *Holds two microscope slides *Economical bulk pack sizes *Recyclable and lightweight Secure transport and straightforward handling for routine workflows The cardboard body provides a lightweight yet protective envelope for up to two slides, reducing postage weight while preserving sample orientation during transit. The simple tray design enables rapid packing and reliable separation of glass slides, which helps to avoid scratching and cross-contamination during handling. For facilities processing frequent small consignments, this slide carrier supports consistent workflow by combining protection with low material complexity. Simplified logistics through standard packaging options Available in pack sizes of 100 or 1000, the container is suited for small laboratories and larger departments alike, enabling consolidated procurement and fewer replenishment cycles. Bulk packaging reduces per-item handling time and simplifies stock management for storerooms and mailrooms. Compatibility with standard microscope slides means the container integrates with existing sample-tracking procedures without requiring changes to labelling or storage racks. Sustainable, practical choice for everyday laboratory use Made from recyclable cardboard, the container offers an environmentally preferable alternative to single-use plastics while remaining robust enough for short-term shipping and internal transfer. Lightweight construction can contribute to lower shipping costs and a reduced carbon footprint across repeated consignments. Clear, minimal design also aids in inspection and filing, making it a pragmatic addition to any microscopy consumables inventory. For procurement of Globe Scientific slide carriers or bulk supply advice, contact Metav Werkzeuge for professional ordering and logistics support from Emmerich — our consultants are available to assist with specification and delivery. Technical data Article number: 513002 Manufacturer article number: 513002 SKU: 513002 Facts Capacity: 2 slides Packaging unit: 100 or 1000 pieces Special features Material: cardboard Product type: slide shipping container Description: Shipping container for 2 slides Brand: Globe Scientific FAQ What is the holding capacity of the container? The container holds two microscope slides securely; the design is for a pair of slides per unit. Are the containers suitable for mailing samples? Yes, the slide shipping container for 2 slides 513002 by Globe Scientific is intended for secure short-term mailing and internal transport of slides. In which pack sizes is the product supplied? The product is supplied in pack sizes of 100 or 1000 pieces to suit different procurement needs. Is the material recyclable? The cardboard construction is recyclable and designed to reduce plastic use in routine sample shipping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 Slide Shipping Container With Hinged Lid, Capacity 2 Slides, Natural Polypropylene - Globe Scientific
Take advantage of secure, contamination‑minimising transport combined with durable, easy‑to‑clean material and compact lab storage; the polypropylene construction and hinged lid protect contents during handling. Order this slide shipping solution via Metav Werkzeuge or contact our consultants for tailored advice. Globe Scientific slide shipping container for 2 microscope slides 513052 — polypropylene, hinged lid Globe Scientific slide shipping container for 2 microscope slides 513052 provides compact, hygienic transport and storage for laboratory microscope slides with a secure swinging lid and robust polypropylene construction. Hinged lid for secure closure Made from polypropylene (PP) Capacity for two microscope slides Natural colour for easy lab sorting Secure transport and reliable storage for delicate slides The slide transport container is designed to minimise movement and contamination during transit. Constructed for holding two slides, the form factor limits lateral play so delicate glass slides remain fixed, reducing breakage risk. The hinged lid provides quick access while maintaining a reliable closure; this combination supports consistent sample integrity when preparing shipments or organising bench storage, helping streamline laboratory workflows. Practical material choice that supports hygiene and handling Made from polypropylene (PP), the container offers chemical resistance and straightforward cleaning compared with porous materials. Polypropylene’s resistance to many common laboratory reagents means routine handling and disinfecting are uncomplicated, while the natural colour aids visual identification in mixed storage. The lightweight yet dimensionally stable material also contributes to efficient stacking and handling, keeping operational overheads low and handling time reduced. Packaging options that simplify procurement and stock control Available in standard packaging units of 100 or 1000 pieces, this container supports predictable replenishment cycles and reduces procurement frequency for high‑throughput sites. The clear SKU reference 513052 simplifies reordering and inventory tracking within purchasing systems. Choosing standardised packaging supports predictable storage footprints and cost‑effective logistics while ensuring consistent supplies for microscopy tasks across workshops and clinical labs. For reliable slide shipment and organised laboratory storage, request the Globe Scientific slide shipping container 513052 from Metav Werkzeuge or contact our consultants at Metav Werkzeuge for procurement and technical guidance. Technical data Article number: 513052 Manufacturer: Globe Scientific Product type: Slide shipping container Material: Polypropylene (PP) Colour: Natural Facts Capacity: 2 slides Packaging unit: 100 or 1000 pieces SKU: 513052 Special features Hinged lid Stackable design Suitable for transport and laboratory storage Simple cleaning and chemical resistance FAQ What capacity does this container have? The Globe Scientific slide shipping container 513052 holds two microscope slides, designed to prevent movement and reduce the risk of breakage. Is the material resistant to common laboratory chemicals? Yes; the container is made from polypropylene (PP), which offers good resistance to many routine reagents and allows straightforward cleaning. How is the lid secured during transport? A hinged lid design provides a reliable closure for the two‑slide compartment, keeping slides secure during handling and transit. How are these units supplied for purchasing? The container is supplied in packaging units of 100 or 1000 pieces, allowing flexible procurement depending on laboratory demand. Can the SKU be used directly for reordering? Yes; reference SKU 513052 when reordering to ensure the correct Globe Scientific slide shipping container is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2 Slide Transport Container With Flip Lid, Capacity 2 Slides, Blue - Globe Scientific
Take advantage of robust, lightweight protection and straightforward handling for safe slide transport and interim storage. The combination of polypropylene durability and a hinged lid reduces breakage and contamination risk while supporting efficient laboratory workflows. Order the slide shipping container directly via Metav Werkzeuge or ask the consultants for tailored advice. Slide shipping container for 2 slides 513052B — Blue polypropylene slide shipping container by Globe Scientific The Slide shipping container for 2 slides 513052B is a compact polypropylene case designed for the safe transport and temporary storage of two microscope slides in laboratory and clinical environments. Polypropylene (PP) construction Capacity for two microscope slides Hinged lid for secure closure Blue colour for easy identification Reliable protection for delicate samples The container offers a controlled solution for transporting and holding microscope slides between collection, analysis and storage. Built from polypropylene, the case provides a durable outer shell that helps to prevent chipping and accidental breakage during routine handling and short transports. The hinged lid provides a reliable closure that keeps slides separated and reduces the chance of surface contamination, thereby protecting sample integrity and supporting reproducible results. Lightweight material that endures laboratory use Made from polypropylene (PP), the housing is both lightweight and resistant to many laboratory chemicals, ensuring practical handling and long service life in busy workstations. The material’s dimensional stability keeps the internal compartments aligned so slides remain secure. This construction minimises storage weight and simplifies internal logistics when moving small batches of prepared slides between benches or into controlled environments. Keeps workflow organised and traceable A distinct blue colour allows rapid visual identification on crowded benches or within transport boxes, supporting swift sorting and fewer handling errors. The compact format is optimised for conventional slide dimensions, enabling straightforward integration into existing sample management routines. By maintaining slides in a dedicated, labelled container, processing times become more predictable and the risk of sample mix-up is reduced — a practical advantage for diagnostic, teaching and research settings. Practical procurement and compatibility The product is offered for repeat ordering in standard packaging configurations to suit inventory needs and laboratory supply chains. Its simple design focuses on core functionality — protected transport, temporary storage and clear visual identification — and it is compatible with standard glass microscope slides used across medical and research laboratories. The robust polypropylene case supports routine handling without adding unnecessary complexity to stock management. Contact Metav Werkzeuge for tailored advice and rapid supply of the Globe Scientific slide shipping container 513052B; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 513052B Label: Slide shipping container for 2 slides 513052B Product type: Slide shipping container Manufacturer: Globe Scientific Facts Capacity: 2 slides Material: Polypropylene (PP) Colour: Blue Packaging unit: 100 or 1000 pieces Special features Hinged lid Suitable for transport and temporary storage of microscope slides Compact laboratory format FAQ What material is the container made from? The slide shipping container for 2 slides 513052B is made from polypropylene (PP), chosen for its strength and suitability for routine laboratory handling. How many slides fit inside the container? The design accommodates two microscope slides, allowing secure separation and minimised contact between prepared specimens. Does the container provide a secure closure? Yes, the container features a hinged lid that closes reliably to keep slides in place during short transports and interim storage. Is the container suitable for diagnostic and research laboratories? The Globe Scientific slide shipping container 513052B is intended for laboratory use where safe, compact transport and temporary storage of slides are required. Can the container be reused? The container can be reused for non-destructive transport and storage; laboratory protocols should be followed for cleaning and sample handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2-14 g/dl Serum Protein Handheld Clinical Refractometer 1.000–1.060 SG Urine Density (Dog/Cat) - Euromex
Take advantage of precise serum protein readings and species‑specific urine specific gravity scales combined with a compact handheld design for rapid in‑clinic assessment; order the Euromex instrument directly via Metav Werkzeuge or ask our consultants if needed. Euromex Clinical Hand Refractometer RF.6614 – Veterinary refractometer with serum protein and dog/cat urine SG scales The Clinical Hand Refractometer RF.6614 is a portable veterinary refractometer calibrated for quick serum protein readings and species‑specific urine specific gravity checks for dogs and cats Veterinary calibration for serum proteins and urine SG Measurement ranges: 2–14 g/dl and 1.00–1.06 sg High resolution: 0.1 g/dl and 0.001 sg accuracy Fast, reliable clinical readings to support triage and routine checks The handheld design delivers immediate, actionable results for routine veterinary screening by measuring serum proteins and urine specific gravity on species‑specific scales. With measurement ranges of 2–14 g/dl for serum proteins and 1.00–1.06 sg for urine, the device allows clinics to perform rapid assessments that support diagnostic decisions without wait times for laboratory returns. The declared accuracies — 0.1 g/dl for serum protein and 0.001 sg for urine specific gravity — mean small variations are detectable, which is especially useful when monitoring hydration status or proteinuria in companion animals. Practical operation and clear, species‑adapted scales for everyday use The refractometer is designed for straightforward optical readings suitable for busy practice environments. The scale layout separates the serum protein range from the urine specific gravity scales for dog and cat, enabling staff to read results with minimal interpretation effort. Because the instrument is a manual, hand‑held refractometer, it is operated without complex setup; basic sample application and visual reading provide a dependable workflow for quick in‑house checks. This simplicity reduces procedure time while preserving data quality, so routine examinations and follow‑up checks become more efficient. Improve clinic efficiency with dependable point‑of‑care measurements Reliable point‑of‑care measurement reduces dependency on external laboratories for preliminary screening and supports faster patient pathways. The clear numeric ranges and fine resolution are focused on common veterinary needs, supporting both triage and ongoing monitoring. For further technical queries or to confirm suitability for specific applications, Metav is available to advise and to supply additional documentation or delivery details via the contact channels below Contact Metav Werkzeuge today to discuss the Euromex Clinical Hand Refractometer RF.6614 for veterinary practice use; Metav experts will advise on suitability and arrange supply from Emmerich with transparent handling. Technical data SKU: RF.6614 Product: Clinical Hand Refractometer RF.6614 Brand: Euromex Product type: Refractometer Facts Serum protein range: 2–14 g/dl Urine specific gravity (dog): 1.00–1.06 sg Urine specific gravity (cat): 1.00–1.06 sg Accuracy (serum protein): 0.1 g/dl Accuracy (urine SG): 0.001 sg Special features Handheld veterinary refractometer Species‑specific urine SG scales for dog and cat Dedicated serum protein scale Portable optical measurement instrument FAQ What measurement ranges does the device cover? The Euromex Clinical Hand Refractometer RF.6614 covers 2–14 g/dl for serum proteins and 1.00–1.06 sg for urine specific gravity on both dog and cat scales. How precise are the readings with this refractometer? Accuracy is specified as 0.1 g/dl for serum protein and 0.001 sg for urine specific gravity with the Euromex RF.6614, enabling detection of clinically relevant changes. Is the instrument suitable for both dogs and cats? Yes, the RF.6614 includes separate urine specific gravity scales calibrated for dog and cat, plus a serum protein scale for broad veterinary use. Does the device require electrical power or batteries? The Clinical Hand Refractometer RF.6614 is a manual, hand‑held optical instrument and is operated without an electrical power supply. Can this refractometer support routine monitoring in a busy clinic? The portable format and species‑adapted scales make the Euromex RF.6614 well suited for routine screening and follow‑up measurements in clinical practice. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
2-Piece Eyecups For NexiusZoom, Compatible With NexiusZoom - Euromex
Take advantage of a straightforward spare-part solution that combines simple compatibility with the NexiusZoom series and delivery as a ready-to-fit pair, ensuring consistent viewing comfort and quick identification for reordering; order the item directly via Metav Werkzeuge or consult our advisors if further details are required. Pair of eyecups for NexiusZoom (NZ.6099) — Eyecups by Euromex A Pair of eyecups for NexiusZoom designed to restore comfortable, repeatable eye positioning for routine inspection and extended observation with NexiusZoom microscopes Compatible with NexiusZoom series Supplied as one pair Identification: SKU NZ.6099 Better comfort for prolonged observation The replacement eyecups deliver a predictable improvement in viewing comfort by creating a more stable eye-to-ocular interface. For operators who spend extended periods at the bench, the accessory reduces stray light and helps maintain the same eye alignment session after session. Fitted correctly, the soft flange forms a light-sealing contact that supports fatigue reduction during repetitive inspection tasks. This practical improvement in workplace ergonomics supports consistent measurement and observation outcomes. Simple retrofit and assured compatibility Designed specifically for compatibility with NexiusZoom instruments, the eyecups are supplied as a pair and identified by SKU NZ.6099 for quick procurement and inventory control. The product is intended as a direct replacement part, simplifying logistics for maintenance routines and spares management. Clear identification minimises ordering errors and helps purchasing departments maintain continuity of operation without lengthy downtimes, which benefits production schedules and laboratory throughput. Practical spare-part strategy for workshops and labs As a straightforward spare, these ocular accessories suit workshops, educational facilities and quality-control laboratories that require reliable, repeatable performance from optical equipment. Having a designated replacement on hand reduces the risk of interrupted inspections and supports scheduled maintenance cycles. For additional technical details or to confirm suitability for a specific NexiusZoom configuration, Metav’s technical advisors are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Easy identification and complementary parts The eyecups are delivered as one pair and can be cross-referenced with adjacent accessories to complete a service kit. Cross-selling references such as NZ.5302 and NZ.5303 assist in assembling a compatible set of spare items for comprehensive upkeep. Clear SKU labelling aids stock management and helps ensure replacement parts are available when required, thereby supporting uninterrupted operation and sound asset management. For assured compatibility and prompt supply of the genuine Euromex eyecups (SKU NZ.6099), request them via Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and fast delivery Technical data SKU: NZ.6099 Label: Paar Augenmuscheln für NexiusZoom. Brand: Euromex Product type: Eyecups Delivery contents: 1 pair of eyecups Compatible series: NexiusZoom Cross-selling SKUs: NZ.5302;NZ.5303 UID: NZ.6099 Facts Pieces per set: 2 Special features Compatibility: NexiusZoom series Supplied as: one pair Intended use: replacement eyecups for microscopes Identification: SKU NZ.6099 Brand association: Euromex FAQ Are these eyecups compatible with all NexiusZoom models? The eyecups are specified for the NexiusZoom series; check the instrument model and the SKU NZ.6099 to confirm physical compatibility before ordering. How are the eyecups delivered? Delivery contains one pair of eyecups as listed; the set is designed for immediate replacement of worn ocular seals. Can the eyecups be ordered as spare parts for teaching labs? Yes, the eyecups are suitable as spare parts for educational and workshop environments and can be ordered using SKU NZ.6099 for clear stock control. Is there a cross-reference for complementary accessories? Cross-selling references include NZ.5302 and NZ.5303 to assist in compiling a maintenance kit alongside the eyecups. How can the product be identified for reordering? Use the SKU NZ.6099 and the product designation when reordering to ensure a precise match to existing NexiusZoom equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2-Slide Shipping Container Polypropylene Natural Colour, Capacity 2 Slides - Globe Scientific
Take advantage of a compact, hygienic transport solution that combines robust polypropylene (PP) construction with a secure capacity for 2 slides; order the Slide transport container for 2 slides 513041 directly via Metav Werkzeuge or consult the Metav team for tailored packaging advice. Slide transport container for 2 slides 513041 by Globe Scientific — polypropylene, natural colour Slide transport container for 2 slides 513041 is a compact transport and shipping cassette designed to protect two microscope slides during handling and transit, suitable for routine laboratory logistics and sample shipment. Capacity for 2 microscope slides Made from polypropylene (PP) Natural colour for easy lab sorting Available in packs of 100 or 1000 Robust, compact protection for delicate samples The container provides a secure enclosure for two microscope slides, reducing the risk of breakage during transport. Constructed from polypropylene (PP), the cassette combines impact resistance with light weight, enabling safe sample movement without adding bulk to parcel shipments. The low-profile design simplifies storage on workbenches or in transport racks and supports standard slide dimensions used in laboratory workflows. Hygienic, chemically resistant material for laboratory use Made of polypropylene (PP), the transport cassette offers good chemical resistance and ease of cleaning, which supports contamination control in diagnostic and research environments. Polypropylene is widely used in laboratory consumables because it resists many common reagents and can be wiped down without compromising the material. This makes the cassette a practical choice for routine sample handling and temporary storage before microscopy or analysis. Packaging options that streamline procurement and stock management Available in packaging: 100 or 1000 pieces, the containers are supplied in quantities that suit both small laboratories and larger facilities. Bulk packaging reduces ordering frequency and simplifies inventory planning, while smaller bulk units keep initial investment and storage needs modest. The standardised packs also help to integrate the item into existing procurement cycles and drive consistent availability on the workbench. Simple integration into laboratory logistics The transport cassette supports efficient lab processes by keeping slides organised and protected during internal transfer or postal shipment. Its straightforward function—securely holding two slides—translates into fewer handling errors and less time spent re-labelling or repacking specimens. For organisations seeking reliable, no-frills consumables, this slide shipping cassette delivers the essential performance labs require without unnecessary complexity. Contact Metav Werkzeuge for procurement and technical guidance on Globe Scientific slide transport containers (SKU 513041) — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 513041 Manufacturer article number: 513041 Brand: Globe Scientific Core data Capacity: 2 slides Packaging: 100 or 1000 pieces Material: Polypropylene (PP) Special features Colour: Natural Product type: Slide transport container / shipping cassette Intended use: Transport and temporary storage of microscope slides FAQ What is the carrying capacity of the slide transport container? The slide transport container holds two microscope slides securely; the Globe Scientific transport cassette (SKU 513041) is designed to prevent movement and reduce breakage during transit. Which material is used for the cassette and why is it suitable? The cassette is made from polypropylene (PP), chosen for its chemical resistance, light weight and durability, which makes the Globe Scientific container (513041) appropriate for routine laboratory handling. In which pack sizes is the product supplied? The product is supplied in packs of 100 or 1000 pieces, enabling flexible procurement for small labs or larger facilities requiring bulk stock. Can these containers be used for postal shipment of slides? Yes, the transport cassette provides compact, protective housing for slides during internal transfer or postal shipment; Globe Scientific’s design (SKU 513041) helps to reduce the risk of breakage in transit. Is the cassette compatible with standard microscope slide dimensions? The container is intended for standard microscope slides and secures two slides in a low-profile format, as specified for the Globe Scientific slide transport container 513041. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2.0 MP 1/2.9 Inch CMOS Digital USB-2 Colour Camera, 2.0 Megapixel - Euromex
Reliable 2.0 MP imaging and a 1/2.9-inch CMOS sensor deliver clear inspection pictures and efficient documentation; the compact USB‑2 interface supports straightforward integration into existing setups. Order the CMEX-2f directly via Metav Werkzeuge or ask our consultants if needed. CMEX-2f — 2.0 MP USB-2 colour camera for digital microscopes (Euromex) The CMEX-2f is a compact 2.0 MP colour USB‑2 camera optimised for digital microscopy, inspection and documentation tasks in laboratories and production environments 2.0 MP resolution for clear images 1/2.9-inch CMOS for reliable sensitivity USB-2 interface for wide compatibility Compact colour camera for microscopy integration Consistent image quality for routine inspection The compact colour sensor delivers reliable results in repetitive measurement and documentation tasks. With a 2.0 MP resolution paired with a 1/2.9-inch CMOS chip, the camera provides a balance of detail and light sensitivity that supports both visual inspection and image archiving. The captured images are suitable for defect recognition and traceable documentation, enabling faster decision-making and smoother workflow in quality assurance environments. The modest resolution reduces file sizes while maintaining necessary clarity for many industrial applications. Easy integration into existing microscopes and PC systems Designed for simple system connection, the camera uses a standard USB-2 interface that ensures broad compatibility with PCs and microscope adaptors. The plug-and-play characteristic minimises setup time and lowers the barrier for retrofitting older stands or inspection rigs. Real-time image transfer supports uncomplicated live viewing and basic image capture without specialised hardware. This pragmatic connectivity reduces installation complexity and helps maintain production uptime during equipment upgrades. Practical design geared to workshop and lab routines A compact form factor reduces interference with microscope ergonomics and makes handling more convenient during repetitive tasks. The small footprint supports flexible mounting and easy repositioning on inspection stations. As a colour camera tuned for microscopy, it preserves natural colour rendition for clearer visual distinction between materials and defects. This practical design supports efficient bench workflows and contributes to consistent inspection outcomes across shifts and operators. Clear technical signals and data interpretation The sensor format and pixel count define the camera’s behaviour in low light and its detail resolution: a 1/2.9-inch CMOS sensor offers a practical compromise between light sensitivity and image detail, while the 2.0 MP rating indicates the native capture resolution available for measurement documentation. For applications requiring higher magnification or advanced metrology, the camera can be combined with optical accessories and appropriate illumination to meet stricter measurement needs. The Euromex pedigree ensures compatibility with microscopy accessories commonly used in inspection environments. Contact Metav Werkzeuge for tailored advice on integrating this Euromex colour camera into inspection stations and to arrange procurement or application consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DC.2000f Product name: CMEX-2f 2.0 MP colour camera Manufacturer: Euromex Facts Resolution: 2.0 MP Sensor format: 1/2.9 inch Interface: USB-2 Special features Sensor type: CMOS Product type: Digital camera / digital microscope Colour imaging FAQ What image resolution does the camera provide? The CMEX-2f provides a 2.0 MP resolution suitable for standard inspection and documentation tasks with balanced detail and file size. Which sensor technology is used and what does it mean? A 1/2.9-inch CMOS sensor is used in the CMEX-2f; this offers good light sensitivity for routine microscopy and helps maintain image clarity under typical laboratory illumination. Is the camera compatible with standard microscope systems? The camera is designed for integration with microscopes and uses a USB-2 interface for straightforward connection to PCs and imaging software. Can the camera be used for live imaging during inspections? Yes, the USB-2 connection supports real-time image transfer, enabling live viewing and basic capture for inspection workflows with the CMEX-2f. Does the camera include built-in illumination? No built-in lighting is specified for the CMEX-2f; illumination is typically provided by the microscope or external light sources to suit the inspection application. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
2/3 Inch C‑Mount High‑Resolution 0.63x Relay Objective for Ergo Head, Compatible with Achios‑X Observer - Euromex
Take advantage of the combination of precise optics, effortless integration with Ergo heads, and dependable manufacture for consistent imaging results in inspection and documentation. Order the adapter directly via Metav Werkzeuge or contact our specialists for tailored advice. Euromex C‑Mount adapter with 0.63× high‑resolution relay lens (Adapter for 2/3‑inch C‑mount cameras) The Euromex C‑Mount adapter with 0.63× high‑resolution relay lens is a dedicated optical adapter designed to deliver wide, sharp images from 2/3‑inch C‑mount cameras and to integrate directly with the Ergo head of Delphi‑X Observer and Achios‑X Observer systems. High‑resolution 0.63× relay lens Designed for 2/3" C‑mount cameras Fits Ergo head on Delphi‑X and Achios‑X Euromex adapter, SKU DX.9863 Faster, more reliable imaging for inspection workflows The 0.63× relay lens reduces the effective magnification seen by the camera sensor, producing a wider field of view while maintaining image detail — a clear advantage for visible inspection and documentation tasks. By matching the optics to a 2/3‑inch C‑mount camera, the adapter minimises cropping and potential vignetting, which leads to fewer retakes and a more efficient throughput. This optical adjustment is particularly useful for routine quality checks and assembly inspection where coverage and clarity are critical. Integration that keeps production moving Designed specifically for use with the Ergo head, the adapter guarantees consistent mechanical and optical alignment when mounted on Delphi‑X and Achios‑X Observer heads. The engineered fit reduces setup time and the need for frequent recalibration, which translates into less downtime on the production line. The dedicated interface also preserves the optical axis, ensuring reproducible results across repeated measurements and image captures. Clear documentation and simplified imaging setup A relay lens serves to project the image from the observation optics onto the camera sensor with an adjusted scale — in this case 0.63× — enabling operators to capture the required scene without changing camera modules. This approach streamlines documentation workflows and reduces the number of accessories needed for varied tasks. The adapter is therefore a practical choice for metrology, assembly inspection and process documentation where consistent framing and image quality support reliable decisions. Built for consistent performance and professional use Manufactured by Euromex, the adapter is intended as a precision accessory for laboratory and industrial imaging set‑ups. The optical configuration focuses on delivering high‑resolution images suitable for critical inspection. Combined with Metav’s distribution and expertise, the adapter forms part of a dependable solution that helps bring precision measurement and imaging into every workshop with predictable availability and expert advice. For tailored integration advice or to secure this Euromex adapter (SKU DX.9863) for Ergo heads, contact Metav Werkzeuge—technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 to discuss system compatibility and ordering. Technical data Article number: DX.9863 UID: DX.9863 Brand: Euromex Product type: Adapter Model series: Achios‑X Observer Suitable for: 2/3‑inch C‑mount cameras Relay ratio: 0.63× Compatibility note: only for Ergo head of Delphi‑X Observer and Achios‑X Observer Facts Relay ratio: 0.63× Sensor format: 2/3 inch Special features High‑resolution relay lens Dedicated fit for Ergo head Intended for inspection and documentation imaging Euromex manufacture FAQ What cameras are compatible with this adapter? The adapter is optimised for 2/3‑inch C‑mount cameras; when paired correctly with a 2/3‑inch sensor camera the Euromex adapter DX.9863 delivers the intended field of view and resolution. Can the adapter be used on any microscope head? No, the adapter is specifically made for the Ergo head of the Delphi‑X Observer and Achios‑X Observer systems and will not fit generic heads without modification. Does the relay effect reduce image quality? When used as intended, the 0.63× relay lens preserves image detail while expanding the field of view, making the adapter suitable for inspection and documentation where a wider frame is required. Is this adapter suitable for measurement applications? Yes, the adapter supports consistent imaging for measurement and documentation workflows when integrated with compatible Observer heads and a 2/3‑inch C‑mount camera. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
2/3" Sensor C-Mount Adapter 0.65x Reduction, For BS.4xxxx Series - Euromex
Reduced image magnification and a standard C‑mount interface enable wider scene capture with industrial cameras while maintaining alignment and simple installation. The 0.65× reduction matches 2/3‑inch sensors to common microscope optics and fits the BS.4xxxx series, allowing fast integration into existing inspection workflows. Order the BS.9865 C‑Mount adapter directly via Metav Werkzeuge or ask our consultants if needed. BS.9865 C‑Mount Adapter — 0.65× reduction for 2/3‑inch sensor cameras (Euromex) The BS.9865 C‑Mount Adapter provides a compact image reduction solution for mounting 2/3‑inch sensor cameras on compatible Euromex microscope stands 0.65× image reduction for wider field For 2/3‑inch sensor cameras Standard C‑mount connection Compatible with BS.4xxxx series microscopes Capture a larger field without changing objectives The 0.65× reduction element is designed to adapt objective output to the 2/3‑inch sensor format, increasing the effective field of view and reducing the risk of vignetting when pairing digital cameras with microscope optics. For inspection and documentation tasks, this means fewer objective changes and faster setup times while retaining usable image area for measurement and traceability. The optical behaviour of the accessory balances coverage and image scale to suit routine metrology, quality control and laboratory photography. Plug‑and‑play fit for established microscope systems Thanks to the C‑mount standard and explicit compatibility with the BS.4xxxx series, mechanical integration is straightforward and repeatable. The adapter provides a stable, industry‑standard interface that preserves optical alignment and repeatability across imaging sessions. For workshops and production environments this translates into reliable image capture, consistent results between shifts and reduced calibration effort when exchanging cameras or upgrading digital sensors. Practical benefits for documentation and analysis workflows Built to complement Euromex optics, the accessory supports efficient image acquisition for both stills and video documentation. The adapter simplifies camera selection by accommodating common industrial camera formats, enabling better utilisation of existing objectives and reducing the need for specialised optics. By streamlining the imaging chain, the accessory contributes to faster data capture and a more consistent visual record for inspection reports and process monitoring. For seamless integration with Euromex imaging systems and application advice, contact Metav Werkzeuge in Emmerich for ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BS.9865 SKU: BS.9865 Label: C‑Mount adapter 0.65× for 2/3‑inch sensor cameras Manufacturer: Euromex Facts Magnification factor: 0.65× Sensor compatibility: 2/3‑inch Compatibility and features Interface: C‑mount Compatible series: BS.4xxxx Product type: Adapter FAQ What effect does the 0.65× reduction have on imaging? The 0.65× element reduces the effective magnification so a larger area of the sample is captured on a 2/3‑inch sensor, helping to avoid vignetting and to improve usable field coverage with standard microscope objectives. Can this adapter be used with any C‑mount camera? Yes. The adapter uses the standard C‑mount interface, so most industrial C‑mount cameras sized for 2/3‑inch sensors are physically compatible with the BS.9865 adapter. Will the adapter fit my Euromex microscope? The accessory is specified for the BS.4xxxx series and is designed to integrate mechanically and optically with those stands without additional modification. Does using this adapter change the objective requirements? In many cases the adapter allows continued use of existing objectives by adjusting the image scale to match the 2/3‑inch sensor, reducing the need to source different magnification objectives for digital capture. Is the adapter suitable for metrology and quality control imaging? Yes. By improving field coverage and preserving alignment through the C‑mount interface, the adapter supports consistent documentation and inspection tasks where repeatable imaging is required. Manufacturer / Responsible: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
20 Slide Mailing Container Cardboard Capacity 20 Slides - Globe Scientific
Take advantage of a lightweight, cost-effective solution for secure slide transport: a cardboard mailer with a 20-slide capacity that simplifies sample logistics while keeping handling efficient; order directly via Metav Werkzeuge or request personal advice for integration into laboratory workflows. Globe Scientific slide shipping container for 20 slides (cardboard) — SKU 513025 Globe Scientific slide shipping container for secure transport and short-term storage of microscope slides; designed for laboratory logistics and specimen dispatch. Capacity for 20 microscope slides Made from recyclable cardboard material Compact design for safe postal transport Robust protection for routine slide dispatch The slide shipping container provides a simple, reliable way to move microscope slides between laboratories, departments or customers. With a clear capacity of 20 slides, the mailer keeps samples organised during transit and reduces handling time compared with loose packing. The cardboard construction is lightweight, which contributes to lower shipping costs and easier manual handling, while the die-cut or folded format (typical for this product type) helps maintain the orientation of slides until unpacking. This straightforward packaging is particularly useful where frequent, small-batch shipments are the norm. Streamlined logistics and sample workflow Designed for use within microscopy supplies and sample-exchange processes, the container supports efficient processing and tracking of specimens. As a standardised mailer for slides, it integrates with existing dispatch procedures and labelling practices, improving throughput in busy sample-management environments. The product's simple design reduces preparation time before shipping and fits well with secondary packaging options used by postal and courier services. This contributes to a reliable chain of custody for routine diagnostic and research workflows. Practical sustainability and disposal benefits Made from cardboard, the container aligns with many laboratories’ efforts to lower environmental impact. Cardboard is widely recyclable and, when sourced responsibly, reduces reliance on plastic alternatives. The material choice also keeps storage footprint and disposal requirements minimal. For teams seeking pragmatic, environmentally aware packaging, this mailer offers a balance between protective function and recyclability without adding complexity to waste management. Ordering options and identification for procurement Available in packaging units of 1 or 10 pieces, the mailer is supplied under article number 513025 by Globe Scientific, enabling straightforward procurement and stock control. The compact format simplifies storage on a supply shelf and makes reordering predictable. Where further technical clarification is required—such as dimensional fit for specialised slide carriers or compatibility with automated packing systems—additional data can be provided on request to align the product with specific operational needs. Contact Metav Werkzeuge for tailored advice, stock availability and integrated supply solutions from Emmerich to the workshop bench Technical data Article number: 513025 Manufacturer: Globe Scientific SKU: 513025 Packaging units: 1 or 10 pieces Facts Capacity: 20 slides Special features Material: cardboard Product type: slide shipping container Intended use: transport and short-term storage of microscope slides FAQ What is the exact capacity of this slide mailer? The container holds 20 slides, indicated by the capacity specification for the Globe Scientific slide shipping container (SKU 513025). Is the material recyclable? Yes, the container is made from cardboard, which is commonly recyclable subject to local waste regulations. How is the product supplied for ordering? The item is available in packaging units of 1 or 10 pieces, allowing flexible replenishment according to consumption rates. Can the container be used for long-term storage? This mailer is intended primarily for transport and short-term storage; for long-term archiving, specialised storage solutions are recommended. Which product reference should be used when reordering? Use article number 513025 or the SKU 513025 and the Globe Scientific product designation to ensure the correct item is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 Slide Storage Box Blue Capacity 20 Slides - Globe Scientific
A compact, colour-coded solution that combines orderly sample storage with straightforward stock management: the blue design and capacity for twenty slides support efficient workflows and easy identification. Order the slide storage directly through Metav Werkzeuge or consult our advisors for supply and availability. Globe Scientific Slide storage case 513029B — holds 20 slides, blue Slide storage case 513029B from Globe Scientific is a compact storage solution for organised microscopy sample management in teaching, laboratory and clinical environments. Holds 20 microscope slides Distinctive blue for easy identification Packaged as 1 piece Fast, reliable organisation for routine microscopy The storage solution offers a clear, space-efficient way to keep prepared samples arranged and accessible. With a capacity for twenty slides, the unit supports rapid retrieval during teaching sessions and repeated laboratory routines, reducing time spent searching for specimens. The organised layout aids lab technicians and students by keeping slides visible and grouped, which contributes to smoother daily processes and fewer handling errors. Improved workflow through visual identification A distinctive blue finish provides an immediate visual cue when sorting trays and cabinets, helping to locate sets of slides quickly among other equipment. The single-piece packaging simplifies inventory control and replacement orders. These features combine to support a more efficient workflow: fewer interruptions, better sample traceability and a tidier workspace that aids compliance with laboratory organisation standards. Practical for a wide range of microscopy tasks Designed for standard prepared slides, this slide storage case meets routine storage needs in educational labs, quality-control stations and small research facilities. The product from Globe Scientific is intended to integrate into existing sample management practices without requiring special handling or additional accessories. The straightforward purpose of the case—secure containment and orderly storage—makes it a practical addition to any microscopy bench. Clear supply and assistance for procurement Stocking and resupply are straightforward thanks to the single-piece packing and a clearly defined article number, which streamlines ordering and catalogue management. For further specification checks or to confirm compatibility with existing rack systems, technical enquiries are welcome; additional documentation can be provided to support procurement decisions and inventory planning. Contact Metav Werkzeuge to secure supplies of the Globe Scientific slide storage case 513029B, arrange delivery from Emmerich, or request further specification details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 513029B Manufacturer: Globe Scientific Packaging unit: 1 piece Facts Capacity: 20 slides Special features Product type: Slide storage case Colour: Blue Description: Storage for 20 microscope slides FAQ How many slides can be stored in the case? The Globe Scientific slide storage case 513029B stores twenty standard microscope slides in an organised layout. Is the storage case suitable for teaching laboratories? Yes, the compact design and clear visual identification make the storage case well suited to teaching and classroom environments. What colour options are available for identification? This item is supplied in blue, which provides a clear visual cue for rapid identification in cabinets and on benches. How is the product supplied? The product is supplied as a single unit per package (packaged as 1 piece), suitable for direct stocking or sample use. Can the case be integrated into existing sample-management systems? The slide storage case is intended for standard prepared slides and can be used alongside typical bench and cabinet arrangements for microscopy workflows. Manufacturer: Globe Scientific; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20 Slide Storage Box Grey, Capacity 20 Slides - Globe Scientific
Take advantage of a compact storage solution that secures 20 microscope slides in a clearly recognisable grey case; the practical capacity and simple handling ensure organised workflows and safer specimen storage. Order the slide box directly via Metav Werkzeuge or consult our specialists for assistance. Slide storage for 20 slides 513029A — Grey slide box by Globe Scientific The Slide storage for 20 slides 513029A is a compact slide box designed for organised storage and basic protection of laboratory microscope slides in educational, research and routine laboratory settings Capacity for 20 microscope slides Space-saving, compact design Grey colour for easy identification Improve laboratory workflow with organised slide storage A clearly arranged storage system reduces time spent searching for specimens and minimises the risk of breakage or contamination. This slide box holds 20 microscope slides, providing a predictable inventory slot for routine procedures and teaching sessions. The compact footprint supports efficient bench organisation and helps maintain a smooth sample handling chain. The practical capacity allows straightforward integration into existing storage routines and supports regular turnover in busy labs. Protect specimens with reliable, low-complexity handling Specimen integrity benefits from systematic storage. The storage case offers basic protection against dust and incidental contact, keeping labelled slides together and reducing handling errors. Standard microscope slides fit securely and remain accessible for inspection or mounting; the simple format avoids time-consuming opening procedures and is compatible with common laboratory workflows. The neutral grey finish aids rapid visual identification among other supplies. Practical procurement and trusted supply for workshop and lab needs Sourcing from a dependable partner reduces logistical strain. Metav Werkzeuge acts as a consistent distribution point for precision equipment, combining wide product availability with a transparent order process. The compact slide storage is suitable for schools, clinics and industry labs that require manageable, low-maintenance storage solutions and straightforward stock replenishment. If further technical details are required, additional specifications can be provided on request. Contact Metav Werkzeuge for reliable supply and procurement of Globe Scientific slide boxes; Metav Werkzeuge can advise on suitability and availability and coordinate delivery from Emmerich to the workshop or laboratory. Technical Data Article number: 513029A Manufacturer article number: 513029A Brand: Globe Scientific Facts Capacity: 20 slides Packaging unit: 1 piece Colour: Grey Materials / Features Product type: Slide box / slide storage Description: Storage for 20 microscope slides Categories: Microscopy supplies › Prepared slide boxes FAQ What size and number of slides does the box hold? The slide box holds 20 microscope slides, designed for standard slide formats used in routine laboratory and educational settings. Is this suitable for long-term archival storage? This storage case provides basic protection against dust and handling; for long-term archival conditions, climate-controlled and archival-grade solutions are recommended rather than this standard storage box. Can the slide box be labelled for sample identification? Yes, the design allows external labelling and clear visual identification; the grey finish helps labels stand out. Is the slide storage compatible with automated slide carriers or racks? The box is intended for manual storage and organisation of slides; compatibility with specific automated carriers depends on the carrier dimensions and is not guaranteed. Which product code should be referenced when ordering? Reference SKU 513029A or the manufacturer article number 513029A when ordering the Globe Scientific slide storage for 20 slides. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com