High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
20x/0.40 Plan Objective IOS Material Science, 4.3 mm Working Distance - Euromex
Take advantage of the Plan optical design, 20× magnification and 0.40 numerical aperture for sharp, distortion‑free imaging; its short 4.3 mm working distance suits surface and material inspection. Order directly via Metav Werkzeuge or consult our specialists for technical compatibility. Plan PLMi 20x/0.40 IOS Objective — Precision objective for iScope materials science microscopes by Euromex The Plan PLMi 20x/0.40 IOS Objective is a high‑resolution microscope lens designed for materials science inspection with a short working distance and no cover‑glass correction. High-contrast Plan optics 20× magnification Numerical aperture 0.40 for fine resolution 4.3 mm working distance for surface inspection Designed for materials science in the iScope series Exceptional imaging for repeatable measurements The Plan optical correction delivers a flat field and reduced edge distortion, so details across the entire field stay sharp and measurable. With 20× magnification and a 0.40 numerical aperture, the lens increases resolution and contrast, making microstructural features more distinct. This benefit is particularly relevant where quantitative imaging and repeatable results are required for inspection, documentation and comparative analysis. Optimised for surface and material inspection A 4.3 mm working distance enables close, high‑detail observation of samples without a cover slip; the lack of cover‑glass correction means the design is tailored to direct surface examination rather than slide work. For laboratories and workshops focused on metallography, fracture analysis or component inspection, this results in clearer surface detail and fewer optical artefacts during routine evaluation. Practical compatibility and straightforward integration Engineered for the iScope model series, the lens integrates with standard iScope nosepieces and optical paths without additional adapters. The compact mechanical design supports stable mounting and quick exchange between objectives, aiding throughput in busy inspection workflows. The objective’s specifications allow predictable depth of field and illumination planning when configuring cameras or measurement software. Reliability and supplier confidence Manufactured by Euromex, the optic follows established quality practices for laboratory equipment, offering consistent performance across units. Paired with Metav Werkzeuge’s distribution and technical guidance, purchasers gain access to a dependable supply chain and product expertise so instrument uptime and inspection quality are maintained. Contact Metav Werkzeuge today to check compatibility with existing iScope equipment or to request bespoke advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and stock information Technical Data Article number: IS.8120 Brand: Euromex Product type: Objective / Lens Model series: iScope Facts Magnification: 20× Numerical aperture: 0.40 Working distance: 4.3 mm Special features Plan optical correction For materials science applications No cover-glass correction Designed for iScope series FAQ What sample types is this objective best suited for? The Plan PLMi 20x/0.40 IOS Objective is optimised for solid samples and surface inspection in materials science, providing high contrast and resolving fine surface features without a cover slip. Can the objective be used with standard iScope nosepieces? Yes, the lens is designed for the iScope model series and fits standard iScope mounting systems without additional adaptors. How does the absence of cover‑glass correction affect imaging? Without cover‑glass correction the objective is specifically tuned for direct surface observation; this reduces spherical aberration for samples examined without a cover slip, enhancing surface detail. What imaging performance can be expected from the 0.40 numerical aperture? A 0.40 NA balances resolution and depth of field, enabling clear visualisation of fine structures while maintaining manageable focus tolerance for inspection tasks. Is this objective suitable for photomicrography or camera capture? The flat-field Plan design and the 20× magnification support camera capture for documentation; camera coupling should account for the short 4.3 mm working distance when setting up illumination and sensor geometry. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
20x/40x Binocular 5 MP Wi‑Fi Digital Stereo Microscope 5.0 MP, LED Transmitted and Reflected Lighting - Euromex
Take advantage of the combination of high-resolution wireless imaging, dual LED illumination and a stable rack-and-pinion stand for efficient inspection and clear documentation; order the Euromex EduBlue directly via Metav Werkzeuge or consult the team for tailored advice. EduBlue Binocular 5 MP Wi‑Fi Digital Stereo Microscope (Binocular stereo microscope, Wi‑Fi, 5 MP) The EduBlue Binocular 5 MP Wi‑Fi digital stereo microscope is a compact inspection microscope designed for routine laboratory work, education and quality-control inspection, offering wireless image transfer and flexible illumination in a portable bench-top format. 5 MP Wi‑Fi image transfer Binocular stereo optics with rotating objective Dual incident and transmitted LED lighting Rack-and-pinion stand for precise focusing High-resolution imaging that speeds decision-making The Euromex EduBlue combines a 5 MP sensor with Wi‑Fi transmission to provide high-detail images without the cable hassle. The digital output enables immediate documentation and reduces processing time during inspections, while the selectable 20x/40x magnification (via the 2x/4x rotating objective) makes both coarse and fine visual checks possible. The wireless workflow supports rapid comparison and archiving of findings in reports, which contributes to more efficient quality-control routines and fewer manual handling steps. Stable lighting and mechanics for reproducible results Dual illumination—both incident and transmitted LED—ensures consistent lighting for opaque and translucent specimens, allowing the same part to be examined under the optimal contrast conditions. The rack-and-pinion stand provides precise vertical travel and repeatable focusing, which is especially useful when multiple inspections require identical imaging parameters. These mechanical and illumination features reduce variability between operators and help to stabilise process control in routine lab or classroom environments. Integration and usability for workshops and teaching labs A binocular stereo head promotes ergonomic observation during prolonged use, while the rotating objective simplifies magnification changes without swapping optics. Wireless imaging facilitates integration with tablets and PCs for live demonstrations, collaborative analysis or remote teaching sessions. The EduBlue series is suited to education, light industrial inspection and small laboratories where straightforward setup, reliable output and ease of documentation are priorities. Contact Metav Werkzeuge for specific configuration advice on the Euromex EduBlue digital stereo microscope and for assistance with purchasing, technical clarification or delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ED.1405-SW Product name: Binocular 5 MP Wi‑Fi digital stereo microscope EduBlue Brand: Euromex Product type: Objective / lens Series: EduBlue Resolution: 5.0 MP Facts Magnification: 20x / 40x Objectives: 2x / 4x rotating objective Special features Binocular stereo head Wi‑Fi digital image transmission Dual incident and transmitted LED lighting Rack-and-pinion stand for stable focusing Wireless illumination FAQ What magnification levels are available with this stereo microscope? The stereo microscope provides selectable 20x and 40x magnification through a 2x/4x rotating objective, allowing quick switching between overview and detail inspection. Can images be transferred wirelessly to a computer or tablet? Yes, the EduBlue supports Wi‑Fi image transmission for live viewing and straightforward documentation on connected devices. Is the lighting suitable for transparent samples as well as solid parts? The combination of incident and transmitted LED illumination covers both opaque components and translucent specimens, enabling versatile inspection options. Which applications is the EduBlue series best suited to? The EduBlue binocular digital stereo microscope is intended for education, light laboratory use and quality-control inspection where fast documentation, reliable imaging and easy handling are required. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
20° Binocular Microscope Head Without Eyepieces, DZ-Series - Euromex
Take advantage of an ergonomic 20° viewing angle together with a compact binocular construction for comfortable, long-duration inspection work; the modular design supplied without eyepieces enables tailored optical configurations. Order the binocular head directly via Metav Werkzeuge or ask our consultants for compatibility and accessory advice. Binocular DZ head, 20° viewing angle (DZ.2025) — Euromex microscope head Binocular DZ head, 20° viewing angle, without eyepieces is a compact optical head intended for stereoscopic observation and flexible system integration Binocular viewing for stereoscopic observation 20° ergonomic viewing angle Supplied without eyepieces for customisation Comfortable posture and reduced fatigue for long sessions The 20° viewing angle is designed to reduce neck and shoulder strain during extended use, so operators can maintain accurate work without frequent repositioning. The binocular construction provides natural stereoscopic depth perception that benefits inspection, assembly and teaching tasks where fine spatial judgement matters. By lowering ergonomic stress, the optical head supports sustained productivity while preserving operator comfort and concentration. Flexible configuration to match existing systems Delivered without eyepieces, the optical head allows selection of eyepiece magnification and field number to suit specific tasks and budgets. The modular approach simplifies integration into existing stands and inspection rigs from the same series, enabling a tailored optical chain rather than forcing a one‑size‑fits‑all assembly. This flexibility helps workshops and laboratories build an optimised setup that balances resolution, field of view and working distance. Clear stereoscopic imaging for precise inspections Mechanical alignment and optical symmetry in the assembly ensure dependable stereoscopic imaging across the field. The compact optical head is targeted at applications that require reliable depth cues—such as component inspection, microparticle alignment and educational demonstrations—providing an intuitive three‑dimensional impression that speeds decision making and reduces error rates. The robust optical geometry supports repeatable observation conditions in routine quality control. Practical handling and workshop readiness The head’s compact footprint facilitates retrofitting and storage while the absence of eyepieces reduces transport volume for modular setups. Where specific magnification ranges are required, eyepieces and adapters can be selected to match the inspection task; for tailored recommendations, technical advice is available from the supplier. Clear labelling and standard mechanical interfaces simplify replacement and maintenance procedures, supporting efficient workshop workflows. Contact Metav Werkzeuge for tailored advice on integrating the Euromex DZ-series binocular head (DZ.2025) into existing inspection systems and to discuss compatible eyepieces and mounting options Technical data Article number: DZ.2025 Label: Binocular DZ head, 20° viewing angle, without eyepieces Product type: Microscope head Model series: DZ-series Brand: Euromex Facts Viewing angle: 20° Special features Binocular head Supplied without eyepieces Designed for stereoscopic observation Compact mechanical footprint Part of the DZ-series FAQ Are eyepieces included with this head? No, the binocular head is supplied without eyepieces; eyepieces must be selected separately to achieve the desired magnification and field of view. What viewing geometry does the head provide? The optical head offers a 20° viewing angle, providing ergonomic relief and comfortable alignment for prolonged observation. Is this head suitable for stereoscopic inspection tasks? Yes, the binocular construction is intended for stereoscopic observation and improves depth perception for precise inspection work. Will the head fit existing DZ-series stands? The head is part of the DZ-series and is designed for integration into systems compatible with DZ-series components; consult Metav Werkzeuge for confirmation of mechanical fit with other makes. How should the optical head be cleaned and maintained? Clean external surfaces with a soft, lint‑free cloth; use lens tissue and approved optical cleaner for glass surfaces, and avoid aggressive solvents on mechanical components Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
216 x 150mm Binocular Microscope iScope 12.5x/15mm Eyepieces Plan PLi Objectives NeoLED Koehler - Euromex
Take advantage of laboratory-grade optics and stable Köhler illumination for reliable asbestos analysis; the combination of EWF eyepieces and plan PLi objectives delivers crisp, reproducible images while the compact stage and ergonomic binocular head keep sample handling efficient. Order the instrument via Metav Werkzeuge or ask their consultants for tailored advice. IScope binocular microscope for asbestos research – EWF 12.5x eyepieces, plan PLi objectives (Euromex) An IScope binocular microscope designed for asbestos identification and routine lab inspection, combining wide-field eyepieces, plan PLi optics and Köhler brightfield illumination for precise, repeatable imaging. Binocular head with EWF 12.5x / 15 mm eyepieces Plan PLi objectives 4x, 10x and S40x PLPHi 216 x 150 mm stage without protruding rack 3 W NeoLED Köhler brightfield illumination Precision optics that support confident fibre identification The instrument’s optical configuration centres on EWF eyepieces with a 15 mm field number and plan PLi objectives, engineered to deliver a flat field and consistent edge sharpness across the field of view. Such optical quality reduces subjective interpretation when inspecting potential asbestos fibres, improving repeatability between operators. The inclusion of an S40x PLPHi objective gives a focused intermediate magnification for detailed morphology checks while retaining good depth of field; this supports faster decision-making in routine sample screening. Illumination and ergonomics that reduce fatigue and speed workflows A stable Köhler illumination system driven by a 3 W NeoLED source provides even brightfield light with minimal heat generation and rapid stabilisation. The consistent contrast benefits both visual assessment and any secondary image capture, while the binocular head eases long inspection sessions and reduces operator strain. Collectively, these features support sustained productivity in the laboratory and help maintain consistent assessment criteria across multiple specimens. Stage design and sample handling for safe, efficient examination The 216 x 150 mm stage is designed without a protruding rack, permitting unobstructed slide movement and secure placement of prepared specimens. This layout simplifies handling of delicate samples and minimises accidental contact during focusing or positioning. The compact yet functional stage footprint makes the instrument suitable for bench spaces where several devices or workstation accessories must be accommodated, while maintaining the stability required for precise microscopic work. Integration into laboratory routines and procurement confidence Supplied as part of the iScope line by Euromex, the instrument is specified for consistent performance in analytical and diagnostic settings. The optical and illumination choices favour reproducibility and ease of training, helping laboratories implement standardised inspection workflows. If additional documentation or clarifications are required, technical advisors can supply specimen handling recommendations and optical verification procedures to align the instrument with laboratory quality protocols. For procurement or technical guidance, contact Metav Werkzeuge for specialist advice on the Euromex iScope (SKU IS.1052-PLAi) and assistance with delivery and lab integration — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: IS.1052-PLAi Manufacturer: Euromex Model series: iScope Product type: Microscope Microscope head: Binocular Eyepiece type: EWF Manufacturer SKU: IS.1052-PLAi Facts Eyepiece magnification: 12.5x Eyepiece field number: 15 mm Stage size: 216 x 150 mm Illumination power: 3 W Special features Plan PLi objectives: 4x and 10x S40x PLPHi objective 3 W NeoLED Köhler brightfield illumination Stage without protruding rack Binocular head FAQ What magnifications are included with this microscope? The Euromex iScope (IS.1052-PLAi) is supplied with EWF 12.5x eyepieces and plan PLi objectives at 4x and 10x, plus an S40x PLPHi objective for higher-detail inspection. Is the illumination suitable for fibre contrast in brightfield? Yes — the 3 W NeoLED Köhler brightfield system in the iScope provides even illumination and stable contrast suitable for routine asbestos screening. Does the stage design support safe slide manipulation? The 216 x 150 mm stage is free of a protruding rack, allowing unobstructed slide movement and safer handling of delicate samples during examination with the iScope. Can this microscope be used for documentation or only visual assessment? While configured primarily for visual asbestos analysis, the optical stability and even NeoLED lighting of the iScope support consistent image capture workflows when paired with appropriate camera adapters and imaging accessories. Who supplies the instrument and how is delivery arranged? The instrument is distributed via Metav Werkzeuge; Metav can advise on delivery, integration and accessory options for the Euromex iScope (IS.1052-PLAi). Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
216 x 150mm Trinocular Microscope iScope with EWF 12.5x/15 mm Eyepieces, Plan PLi 4x/10x and S40x PLPHi Objectives, NeoLED Köhler Illumination - Euromex
Combining a trinocular head, high-performance plan PLi objectives and a stable NeoLED Köhler illumination yields consistent, reproducible results for routine asbestos analysis, ideal where laboratory reliability matters. Order this instrument directly via Metav Werkzeuge or consult our specialists for application advice. IScope trinocular microscope for asbestos research — Euromex iScope with EWF 12.5x eyepieces and NeoLED Köhler illumination IScope trinokular Mikroskop für Asbestos research mit EWF 12.5x/15 mm Okulare, plan PLi 4x und 10x PLi und S40x PLPHi Objektive, 216 x 150 mm Objekttisch ohne vorstehende Zahnstange. 3 W NeoLED Hellfeld Köhler Beleuchtung Trinocular head for camera attachment EWF 12.5x eyepieces, 15 mm field number Plan PLi objectives for flat field imaging 3 W NeoLED Köhler brightfield illumination Reliable optical performance for diagnostic work The Euromex trinocular instrument is built for repeatable observation of fibrous materials, combining EWF eyepieces with plan PLi objectives to reduce field curvature and maintain sharpness across the image. The wide 15 mm field number allows a larger viewing area, which speeds systematic searches on a sample. The optical design prioritises measurement consistency and visual clarity, lowering the risk of missed fibres during routine inspection. Controlled lighting and contrast for clear identification A 3 W NeoLED Köhler illumination system provides stable, homogeneous brightfield light and improves contrast while reducing heat at the specimen. Köhler illumination is a microscope technique that aligns the light source and condenser to create uniform illumination; the result is improved image uniformity and better definition of subtle structures. For asbestos analysis, this means more consistent visibility of thin or low-contrast fibres without frequent readjustment. Ergonomic stage and workflow advantages for lab efficiency The 216 x 150 mm stage, designed without a protruding rack, offers a smooth working surface and easier specimen handling, particularly when performing serial examinations or mounted slide work. The trinocular head permits simultaneous visual inspection and documentation via a camera port, supporting traceable records and digital archiving. These features reduce handling time and support a more efficient throughput in busy microscopy environments. Practical suitability and interpretation for non-specialists Optical terms can seem technical, but their benefits are practical: plan objectives correct for curvature so images are uniformly sharp; EWF eyepieces enlarge the visible field to inspect more area per glance; Köhler illumination removes distracting light gradients. The instrument’s specification focuses on dependable observation rather than marketing claims, making it suitable for laboratories that require methodical analysis and clear documentation standards. For precise enquiries or to place an order for this Euromex iScope instrument, contact Metav Werkzeuge for tailored advice and delivery from Emmerich to your laboratory bench. Technical Data Article number: IS.1053-PLAi Manufacturer: Euromex Model series: iScope Product type: Microscope Head: Trinocular Facts Eyepiece magnification: 12.5x Field number: 15 mm Stage size: 216 x 150 mm Illumination power: 3 W Special features Eyepieces: EWF 12.5x / 15 mm Objectives: Plan PLi 4x, Plan PLi 10x, S40x PLPHi Illumination type: NeoLED Köhler brightfield Stage: Flat stage without protruding rack FAQ What magnification and field of view do the eyepieces provide? The instrument uses EWF 12.5x eyepieces with a 15 mm field number, offering a wide visible area for more efficient scanning of slides. Are the objectives corrected for flatness across the field? Yes, the set includes plan PLi objectives (4x and 10x) and an S40x PLPHi, which are designed to deliver a flat field and consistent sharpness from centre to edge. Is the illumination suitable for prolonged observation of samples? The 3 W NeoLED Köhler illumination supplies stable, low-heat brightfield lighting that is appropriate for extended inspection without excessive warming of the specimen. Can a camera be attached for documentation while observing? The trinocular head enables simultaneous visual observation and camera attachment for digital documentation and archiving. Is the stage design helpful for routine slide handling? The 216 x 150 mm stage, without a protruding rack, provides a smooth workspace that simplifies handling and positioning of slides during serial analyses. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
21mm 10× HWF Eyepiece Pair for StereoBlue, Wide Field - Euromex
Take advantage of high-performance optics and straightforward integration to speed up stereo‑microscopy tasks while maintaining consistent inspection quality. The combination of HWF wide‑field design and 10× magnification gives a broader observation area and clearer detail for routine quality checks. Order the eyepiece set directly via Metav Werkzeuge or consult our specialists for compatibility advice. SB.6210 Pair HWF eyepieces 10×/21 mm for Euromex StereoBlue HWF eyepieces for StereoBlue — high wide‑field oculars providing 10× magnification with an extended field number for stereo microscopy applications HWF wide-field optics 10× magnification for detailed viewing 21 mm field number for wide field of view Compatible with StereoBlue stereo microscopes Accurate optics that increase inspection speed and reliability The SB.6210 eyepiece set combines a high wide‑field (HWF) optical design with 10× magnification, delivering a noticeably larger apparent field than standard oculars. The 21 mm field number describes the diameter of the image circle seen through the eyepiece; a higher field number means less panning and quicker visual coverage of specimens or assemblies. For production and laboratory environments, this translates into faster inspection cycles and more consistent detection of defects, making the eyepieces a pragmatic choice where throughput and repeatability matter. Comfortable observation that reduces fatigue during long sessions Ergonomic viewing is a practical benefit of wide‑field oculars: the broader field of view and optimised eye relief reduce head and eye movement, helping to maintain concentration during extended checks or teaching sessions. The optical configuration of these oculars supports natural binocular vision, which aids depth perception in stereo microscopes and contributes to reduced eye strain. As part of a microscope setup, the oculars enhance operator comfort and can indirectly improve inspection accuracy by sustaining attention over longer periods. Straightforward integration into existing StereoBlue systems and upgrade paths These oculars are specified for use with the StereoBlue series, enabling a direct swap or upgrade where models accept matching eyepieces. The compact design and standard mount make them suitable for routine replacement and inventory management in workshops and labs. A selection of complementary items and alternative eyepiece options is available under the listed cross‑references, which simplifies configuring optical setups for differing task requirements. For customers seeking broader system changes, the oculars form a compatible component within modular stereo‑microscope workflows. For procurement or technical enquiries about the SB.6210 eyepiece set, contact Metav Werkzeuge to discuss StereoBlue compatibility and supply options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SB.6210 Label: Pair of HWF eyepieces 10×/21 mm for StereoBlue Manufacturer: Euromex Product type: Eyepiece Eyepiece type: HWF Quantity per set: 2 Compatible series: StereoBlue Magnification: 10× Field number: 21 mm Cross‑selling SKUs: SB.1302;SB.1302-P;SB.1402;SB.1402-P;SB.1702;SB.1702-B;SB.1702-P;SB.1702-U;SB.1703;SB.1703-B;SB.1703-P;SB.1703-U;SB.1902;SB.1902-B;SB.1902-P;SB.1902-U;SB.1903;SB.1903-B;SB.1903-P;SB.1903-U;SB.3903;SB.3903-P Specifications Magnification: 10× Field number: 21 mm Set contents: 2 eyepieces Features / Compatibility HWF (high wide‑field) optics Designed for StereoBlue stereo microscopes Standard eyepiece mount for straightforward replacement FAQ Are these eyepieces compatible with other stereo microscopes? These eyepieces are specified for the StereoBlue series; compatibility with other microscope models depends on eyepiece tube dimensions and mounting standards and should be verified before purchase. What does the field number 21 mm mean in practice? A field number of 21 mm indicates the diameter of the image circle visible through the oculars; a larger field number provides a wider apparent field of view and reduces the need to reposition the specimen during inspection. Can these eyepieces improve operator comfort during long inspections? Yes, the HWF design and wider field of view help to reduce eye movement and fatigue, supporting extended observation sessions with less strain. Is the magnification fixed at 10× or are alternative options available? The SB.6210 set provides fixed 10× magnification; alternative eyepiece magnifications and related accessories are available under the listed cross‑references for different inspection needs. Are replacement eyepieces or accessory optical components available for this series? Replacement oculars and complementary optical components that fit the StereoBlue platform are offered; refer to the cross‑selling SKUs for matching options and configurations. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
21mm HWF Eyepiece 10× With Reticle, 21mm Field Number - Euromex
Take advantage of wide-field optics, 10× magnification and an integrated crosshair to speed up alignment and inspection workflows. Order the eyepiece directly via Metav Werkzeuge or consult the specialists for integration advice. HWF eyepiece 10×/21 mm with reticle — Euromex StereoBlue compatible (SB.6210-C) HWF eyepiece 10×/21 mm with reticle for precise positioning and inspection tasks on StereoBlue microscopes, combining a large visible field with a reference crosshair for repeatable alignment. HWF wide-field optics 21 mm 10× magnification for clear detail Integrated crosshair reticle for alignment Compatible with StereoBlue series Faster visual inspection with a larger field of view The combination of wide-field optics and a 21 mm field number provides a visibly larger apparent field, which reduces the need for frequent stage movements during routine checks. With 10× magnification, small components and solder joints become easier to evaluate without changing objectives, improving throughput during repetitive inspection tasks. This optical configuration is especially advantageous in assembly and quality control environments where time and visual coverage matter. The design supports a calmer viewing posture for operators, which can reduce fatigue during extended inspection runs. Precise alignment and repeatable documentation An integrated reticle (crosshair) offers a fixed visual reference that assists with centring, alignment and comparative documentation. The reticle is useful for positioning samples, aligning fixtures and estimating relative distances when combined with calibrated objectives. For workshops that need reproducible set-ups, the crosshair reduces repositioning time and supports consistent imaging procedures. The eyepiece is a practical option where straightforward visual reference is preferable to digital overlay, offering a robust analogue solution for many laboratory and production settings. Comfort, compatibility and straightforward integration Designed as a high wide-field ocular, the eyepiece fits the StereoBlue series and integrates quickly into established inspection rigs. The optical configuration maintains eye relief and a wide apparent field, easing user comfort across multiple operators. Compatibility with the StereoBlue range ensures straightforward retrofitting and minimal disruption to existing setups, which streamlines procurement and installation in small workshops as well as larger production lines. Robust visual aid for everyday metrology tasks The eyepiece delivers reliable optical performance for routine metrology and inspection tasks without unnecessary complexity. As a precision-focused accessory, it supports clear observation and alignment tasks in electronics, materials inspection and small-part assembly. Where a quick visual reference and broad field are priorities, this wide-field ocular contributes to measurable efficiency gains and a more ergonomic inspection workflow. For precision alignment and dependable visual checks, choose the Euromex HWF eyepiece and order through Metav Werkzeuge for rapid supply from Emmerich and expert integration advice. Technical data SKU: SB.6210-C Manufacturer: Euromex Product type: Eyepiece Label: HWF eyepiece 10×/21 mm with reticle Core specifications Magnification: 10× Field number: 21 mm Pieces per set: 1 Special features HWF eyepiece type Integrated reticle (crosshair) Compatible with StereoBlue series Cross-selling SKUs: SB.1302;SB.1302-P;SB.1402;SB.1402-P;SB.1702;SB.1702-B;SB.1702-P;SB.1702-U;SB.1703;SB.1703-B;SB.1703-P;SB.1703-U;SB.1902;SB.1902-B;SB.1902-P;SB.1902-U;SB.1903;SB.1903-B;SB.1903-P;SB.1903-U;SB.3903;SB.3903-P FAQ What magnification does this eyepiece provide? The Euromex HWF eyepiece offers 10× magnification, suitable for detailed inspection when combined with typical stereo objectives. How large is the visible field through the eyepiece? The eyepiece has a 21 mm field number, giving a wide apparent field that reduces stage movement during inspections. Is the crosshair suitable for alignment tasks? Yes, the integrated crosshair reticle provides a fixed reference for centring and alignment for many visual inspection and assembly tasks. Can this eyepiece be used in other microscope ranges? The eyepiece is designed for compatibility with the StereoBlue series; fit and optical match with other systems should be checked before integration. How many eyepieces are supplied per set? Delivery contains one eyepiece per set (piece per set: 1), matching the typical accessory requirements for stereo microscopes. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
21mm Widefield Precision Eyepiece 10× With Micrometer Scale - Euromex
Benefit from exact in‑view measurement and a wide, comfortable field of view that speeds inspection and reduces operator fatigue. The integrated micrometre scale and 10× magnification ensure measurable results where quick verification and repeatable optics matter. Order the eyepiece directly via Metav Werkzeuge or consult our team for compatibility advice. HWF eyepiece 10×/21 mm with micrometre scale (SB.6210-M) – Euromex eyepiece for StereoBlue An HWF eyepiece 10×/21 mm with integrated micrometre scale is designed for routine measurement and visual inspection on StereoBlue stereo microscopes. 10× magnification for clear mid-range viewing 21 mm wide field number for larger overview Integrated micrometre scale for precise measurement Compatible with StereoBlue series eyepiece tubes Measure directly in the eyepiece for faster inspections The integrated micrometre scale delivers direct, in‑view measurement capability that removes an extra handling step from routine checks. When calibrated with a stage micrometre, each division on the reticle corresponds to a defined length depending on objective magnification, allowing repeatable readings and reducing averaging time. This reduces throughput bottlenecks in quality control and supports traceable documentation of component dimensions. Larger field and ergonomic viewing for efficient workflows With 10× magnification and an FN 21 mm optical design, the ocular increases usable field of view compared with standard eyepieces, enabling broader overview inspections without frequent repositioning. The wide-field optics maintain image flatness towards the edge, so features remain sharp across the view and operators experience less eye strain during prolonged use. The result is improved inspection speed and consistent visual assessment across multiple parts. Straightforward integration and dependable supply The eyepiece is engineered for compatibility with the StereoBlue series and fits standard eyepiece tubes for uncomplicated installation. Supplied as a single piece, the eyepiece simplifies stock management , and replacement is quick. Optical tolerances are held to workshop standards to provide stable performance over repeated use; combined with Metav’s distribution from Emmerich, the solution supports uninterrupted workshop operations with reliable availability. For trustworthy measurement in everyday inspection routines, request the Euromex HWF eyepiece (SB.6210-M) from Metav Werkzeuge for tailored technical advice and dependable delivery from Emmerich – info@metav-werkzeuge.com · +49 2822 7131930 Technical specifications Article number: SB.6210-M Description: HWF eyepieces 10×/21 mm with micrometre scale Manufacturer: Euromex Core data Magnification: 10× Field number (FN): 21 mm Pieces per set: 1 Features High wide-field eyepiece Integrated micrometre scale Compatible with StereoBlue series FAQ How is measurement performed with the eyepiece reticle? The integrated reticle provides a micrometre scale that must be calibrated with a stage micrometre; once calibrated, the Euromex eyepiece (SB.6210-M) enables direct measurement in the field of view, with each division corresponding to a defined length at a given objective. Is this eyepiece compatible with other stereo microscope lines? The ocular is specified for the StereoBlue series; compatibility with other makes requires matching of eyepiece tube diameter and optical clearance, so checks against the instrument’s eyepiece tube specification are recommended. What advantages does the 21 mm field number provide? A 21 mm field number increases the apparent viewing area, permitting faster visual surveys and reducing the need for repositioning; this supports more efficient component inspection and lower operator fatigue. Can the micrometre scale be used for absolute measurements out of the box? Absolute measurements require calibration against a known standard; the micrometre reticle on the Euromex ocular provides relative divisions that become absolute once calibrated to the objective and working distance in use. How should the eyepiece be cleaned and maintained to preserve accuracy? Clean optical surfaces with lint‑free cloths and approved lens fluid; avoid touching the reticle directly. Periodic re‑calibration is advised after cleaning or if optics are replaced to ensure measurement accuracy. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
22 x 22 mm Cover Glass 0.14 mm Chemical-Resistant White Glass, Pack of 200 - Globe Scientific
Take advantage of chemical‑resistance, precise 0.14 mm thickness and consistent planarity for dependable microscopy preparations; order directly via Metav Werkzeuge or consult our specialists for technical advice. Globe Cover Glass 22 x 22 mm, 0.14 mm — Chemical‑resistant white glass (1404-10-200) A Globe Cover Glass 22 x 22 mm, 0.14 mm is designed for routine laboratory and educational microscopy, offering Class No. 1 flatness and chemical resistance for reliable specimen protection Chemically resistant white glass Precision thickness 0.14 mm (Class No. 1) Uniform plano surface for consistent imaging Aluminium packaging for contamination protection Achieving reproducible imaging through stable optical characteristics The cover slips deliver consistent optical clarity and a precisely controlled thickness of 0.14 mm, a dimension that supports predictable focal planes and objective correction for standard microscopy. Thanks to the class No. 1 planarity, these substrates reduce focal variation across a field of view, which is especially beneficial for comparative imaging and routine documentation. Laboratories gain measurable workflow advantages: fewer retakes, faster focusing and reproducible results when mounting specimens or preparing stained slides. Built to resist common laboratory reagents and handling Manufactured from chemical‑resistant white glass, the slips withstand many common staining agents and aqueous solutions without surface degradation, preserving optical quality during processing. The material choice minimises interaction with reagents and supports longer handling times during complex protocols. For technicians and educators, the robustness translates into fewer damaged covers, less sample loss and a lower frequency of replacements—advantages that improve throughput and reduce downtime in busy lab environments. Practical packaging and handling to protect sample integrity Each sheet is wrapped in aluminium to limit particulate contamination and light exposure before use, simplifying storage in shared laboratories. The uniform flatness and controlled surface finish make the slips straightforward to place and remove with minimal bubble formation under the coverslip, supporting reliable immersion of mounting media where compatibility permits. These handling benefits help maintain sample integrity and contribute to a smoother preparation routine for microscopy tasks in research, teaching and routine analysis. For consistent slide preparation choose Globe Scientific cover slips via Metav Werkzeuge — contact Metav Werkzeuge for tailored advice or technical specifications at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 1404-10-200 Manufacturer: Globe Scientific Model series: Globe Cover Glass Product type: Cover glass Description: Cover glasses from chemical‑resistant white glass, aluminium wrapped Facts Dimensions: 22 x 22 mm Thickness: 0.14 mm Special features Material: Chemical‑resistant white glass Packaging: 200 pieces per box; 1000 pieces per carton Packaging material: Aluminium wrapping Thickness class: No. 1, uniform flatness FAQ What is the exact thickness and optical class of these cover glasses? The Globe Cover Glass 22 x 22 mm, 0.14 mm (SKU 1404-10-200) has a thickness of 0.14 mm and is manufactured to Class No. 1 flatness for consistent imaging. Are these cover slips chemically resistant to common stains? Yes, the cover slips are produced from chemical‑resistant white glass, making them suitable for many standard staining procedures and routine reagent exposure in the laboratory. Can these cover glasses be used for educational and routine lab microscopy? These cover glasses are intended for routine and educational microscopy applications, offering reliable planarity and optical clarity for everyday slide preparation. How are the cover glasses packaged to protect against contamination? The product is wrapped in aluminium to limit particulate contamination and light exposure prior to use, supporting safe storage and handling. What brand and SKU should be referenced when ordering? Refer to Globe Scientific cover glass, model series Globe Cover Glass, SKU 1404-10-200 when requesting this product. Manufacturer: Globe Scientific; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22 x 22 mm Cover Glass 0.175 mm Chemical-Resistant White Glass, Thickness Class No. 1.5 - Globe Scientific
Take advantage of chemical‑resistant white glass and a precise 0.175 mm thickness (No. 1.5) to ensure consistent imaging and reliable focal planes in routine microscopy; the product is packaged in aluminium to reduce contamination during storage and transport. Order the product directly via Metav Werkzeuge or ask our consultants for application advice. Globe Cover Glass — Cover slip 22 x 22 mm, 0.175 mm The Cover slips 22 x 22 mm, 0.175 mm (1404-15-200) provide precision cover glass for routine microscopy and prepared-slide protection in laboratory and teaching environments Chemical-resistant white glass Precision thickness 0.175 mm (No. 1.5) Aluminium-protected packaging Consistent imaging through precision thickness and planarity These cover slips are manufactured from chemical‑resistant white glass and produced to a thickness of 0.175 mm, corresponding to No. 1.5 classification. This specific thickness is the industry standard for high‑numerical‑aperture objectives and immersion work, so users benefit from predictable optical behaviour and reduced spherical aberration. The uniform planarity across each sheet minimises focal variation between samples, which translates into fewer adjustments at the microscope and more repeatable measurements during image capture. Protected storage and handling for contamination control Supplied in aluminium packaging, the sheets are shielded from dust and airborne contaminants until use, improving sample integrity in sensitive applications. The compact packaging is designed for cleanroom‑style handling and straightforward inventory management. With packaging optimised to keep surfaces pristine, the need for frequent replacement is reduced, supporting efficient workflow in both busy teaching labs and small commercial facilities. Designed for routine laboratory workflows and compatibility Measuring 22 x 22 mm, these cover slips fit standard slides used in histology and general microscopy, making them suitable for slide preparation across a range of specimens. The chemical resistance of the substrate extends compatibility with common stains and reagents, decreasing the risk of edge etching or corrosion that can affect imaging quality. As a result, sample preparation time is conserved and downstream analysis benefits from consistent sample presentation. For reliable focal-plane performance and contamination‑protected supply, contact Metav Werkzeuge to obtain Globe Scientific cover slips (1404-15-200) and expert guidance tailored to the laboratory application Technical Data Manufacturer: Globe Scientific Model series: Globe Cover Glass Article number: 1404-15-200 Product type: Cover slip Facts Dimension: 22 x 22 mm Thickness: 0.175 mm Packaging: 200 per box; 1000 per carton Special features Chemical-resistant white glass Thickness class: No. 1.5 Uniform flatness Aluminium-protected packaging FAQ Are these cover slips suitable for high‑NA objectives? Yes. The Globe Cover Glass cover slips (1404-15-200) are specified at 0.175 mm (No. 1.5), the standard thickness for high‑numerical‑aperture objectives and immersion‑lens work. What does No. 1.5 thickness mean for imaging? No. 1.5 indicates a nominal thickness of 0.175 mm; this standard helps ensure correct optical correction and minimal spherical aberration when using modern microscope objectives, as provided by the Globe Scientific cover slips. How are the cover slips packaged to prevent contamination? The cover slips are supplied in aluminium packaging to protect surfaces from dust and handling contamination until use, with a box quantity of 200 per box and 1000 per carton for efficient lab stocking. Can these cover slips be used with common chemical stains? Yes. The material is chemical‑resistant white glass, offering improved resistance to common stains and reagents used in routine microscopy sample preparation. Is the size compatible with standard microscope slides? The 22 x 22 mm format is compatible with many standard slide preparations, making these cover slips suitable for histology, teaching labs and general microscopy applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22 x 22 mm Cover Slips 0.13–0.17 mm 100 Pieces - Euromex
Consistent imaging and secure specimen protection derive from the precise 22 x 22 mm format and the controlled 0.13–0.17 mm thickness; order the product directly via Metav Werkzeuge or consult our experts for supply and application advice. Euromex Cover slips 22 x 22 mm (0.13–0.17 mm) – Cover slip A Euromex cover slip designed for routine microscopy and reliable specimen protection in lab and educational environments. Precision-cut 22 x 22 mm format Optical glass, 0.13–0.17 mm thickness Pack ensures uniform specimen preparation Reduced optical distortion for clearer results Uniform thickness across each cover slip minimises variations in focal plane and spherical aberration, so imaging is more reproducible and easier to interpret. The specified 0.13–0.17 mm range is compatible with common objective corrections, which supports reliable brightfield and phase-contrast observations. This controlled thickness also helps maintain consistent light transmission, improving contrast for routine analyses and reducing the need for repeated adjustments during microscopy. Streamlined sample preparation for everyday workflows The standard 22 x 22 mm format fits most slides and mounting systems used in teaching labs and routine diagnostics, enabling faster sample mounting and throughput. A dimensionally accurate cover layer protects preparations from contamination and evaporation while preserving sample morphology during handling. By simplifying handling procedures, these cover slips contribute to more efficient laboratory routines and smoother sample exchange between colleagues. Practical sourcing and compatibility for laboratories Supplied under the Euromex label and identified by SKU PB.5168, these cover slips support consistent inventory management and traceability. The standard format and reliable thickness tolerance make the product suitable for a broad range of applications, from educational workbenches to routine quality-control tasks. Trustworthy dimensional control reduces waste and rework, helping maintain productivity across repeated microscopy sessions. For dependable laboratory consumables and expert ordering assistance, contact Metav Werkzeuge for availability and tailored advice on Euromex cover slips – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: PB.5168 Item: Cover slip Brand: Euromex Format: 22 x 22 mm Thickness: 0.13–0.17 mm Pack content: 100 pieces Specifications Size: 22 x 22 mm Thickness range: 0.13–0.17 mm Pack count: 100 SKU: PB.5168 Materials and features Product type: Cover slip Label: Deckgläser 22 x 22 mm, 0.13-0.17 mm, 100 Stück Manufacturer reference: Euromex FAQ What thickness tolerance can be expected for these cover slips? The Euromex cover slips (SKU PB.5168) are specified with a thickness range of 0.13–0.17 mm, providing consistent optical performance for routine microscopy. Are these cover slips suitable for use with immersion objectives? These cover slips are specified with a thinness compatible with many objective corrections; however, specific immersion applications require matching the objective's cover-glass correction—verify the objective's specifications before use. Will the 22 x 22 mm size fit standard microscope slides? Yes, the 22 x 22 mm format is a standard cover slip size and is compatible with most common slides and mounting techniques used in laboratories and teaching environments. How are the cover slips supplied and identified? The items are supplied under the Euromex label and are identified by the article number PB.5168 for inventory and ordering. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands, info@euromex.com
220mm 0.4× Auxiliary Lens for NexiusZoom Series, Compatible with A/AP/B/BC/U Stands - Euromex
Data inconsistency: Manufacturer details for "Euromex" are not included in the provided manufacturer mapping. Unable to generate the product description—please supply the manufacturer's full address and contact information, including street name, city, postal code, country, and any relevant phone numbers or email addresses, to ensure accurate and complete documentation of the manufacturer in our system, as this information is essential for creating a comprehensive and reliable product description that meets the necessary standards and requirements for proper identification, traceability, and verification of the manufacturer’s credentials in accordance with industry guidelines and best practices.
22mm 10x EWF Eyepiece 30mm Tube For iScope - Euromex
Take advantage of a wide field of view combined with 10× magnification and a 30 mm tube fit for precise, efficient inspections; this results in faster visual checks and improved documentation quality. Order the eyepiece directly via Metav Werkzeuge or consult the specialists for compatibility and supply details. EWF 10×/22 mm eyepiece — 30 mm tube for iScope (Euromex) The EWF eyepiece for iScope is a wide-field optical accessory designed to increase visible area and improve comfort during routine inspection and imaging tasks on compatible microscopes. Extra-wide field of view (EWF) 22 mm field number for wider image 10× magnification for detailed inspection 30 mm tube fitting for iScope microscopes See more at a glance and work faster The EWF 10×/22 mm eyepiece delivers an expanded apparent field that significantly reduces the need for frequent stage adjustments during inspection. A larger field number (22 mm) means a broader portion of the specimen is visible at once, which shortens cycle times for repetitive checks and speeds up visual sorting. This wider view is particularly valuable where rapid orientation and overview are required, such as quality control, sample screening, or educational demonstrations. Consistent detail and reliable image capture With 10× magnification, the eyepiece provides a balance between overview and detail, enabling clear observation of features without excessive zoom. The 22 mm field number contributes to uniform edge-to-edge coverage, which supports more consistent documentation and easier image alignment for photomicrography workflows. For users with limited optical expertise, the field number describes the diameter of the exit pupil in millimetres and helps predict the usable field of view when paired with a given objective. Practical fit and workshop-ready handling Designed to mount on a 30 mm tube, this eyepiece integrates directly with the iScope series for straightforward assembly and secure seating. The construction emphasises stable optical alignment to preserve repeatability between sessions, reducing set-up time on the shop floor or in the laboratory. Where quick swaps between applications are needed, the standard tube diameter and wide-field design simplify instrument configuration and ergonomic observation during extended use. Contact Metav Werkzeuge to confirm fitment for specific iScope models and arrange delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: IS.6210 Product: Eyepiece Type: EWF Model series: iScope Manufacturer: Euromex UID: IS.6210 Facts Magnification: 10× Field number: 22 mm Tube diameter: 30 mm Special features Extra-wide field eyepiece Compatible with iScope series Designed for routine inspection and documentation FAQ What does the 22 mm field number mean for inspection work? The 22 mm field number denotes the eyepiece’s exit pupil diameter and correlates with the visible field size; with the EWF 10×/22 mm eyepiece (Euromex, SKU IS.6210) this translates into a noticeably wider image area and fewer stage movements during inspections. Is this eyepiece compatible with other microscopes that use a 30 mm tube? Yes, the eyepiece fits standard 30 mm tubes and will be physically compatible with other microscopes using that tube diameter; optical performance will depend on the host instrument’s objectives and optical path. Can the eyepiece be used for photomicrography with the iScope series? The wide field and 10× magnification support straightforward visual documentation and imaging workflows; for camera coupling, check the iScope’s camera port and adapter options to ensure correct projection and registration. How does the EWF design affect observer comfort during long sessions? An extra-wide field reduces eye and head movement while scanning, resulting in less fatigue and more comfortable, prolonged observation in quality control or teaching environments. What applications suit this eyepiece best? The eyepiece is well suited to routine inspection, preparatory screening, educational demonstrations and any task where a broad, comfortable field of view and moderate magnification improve efficiency. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
22mm 10x EWF Eyepiece with Reticle for iScope 30mm Tube - Euromex
Take advantage of precise visual reference and broad field coverage thanks to the 10× magnification and integrated reticle, combined with straightforward compatibility for 30 mm tubes; order the eyepiece directly via Metav Werkzeuge or ask the consultants for application advice. EWF 10x/22 mm Eyepiece with Reticle for iScope, 30 mm Tube — Euromex An EWF 10x/22 mm eyepiece with integrated reticle designed for iScope microscopes, optimised for measurement, alignment and inspection tasks EWF wide-field optics, 22 mm field number 10× magnification for clear detail Integrated reticle for precise alignment Fits 30 mm tube systems (iScope compatible) Larger visual field for faster inspection and reliable measurement The wide-field ocular provides a 22 mm field number, offering a visibly larger observation area than standard eyepieces; this wider view reduces repositioning time during inspection and speeds up procedures that require continuous tracking of specimens. Combined with 10× magnification, the optical design balances detail and context, making the ocular particularly suitable for routine metrology checks, documentational imaging or quality-control workflows where a broad field assists visual orientation. The optical specifications are selected for clarity and repeatability rather than decorative effect, ensuring consistent results under varied workshop conditions. Built-in reticle for alignment and repeatable reference points An integrated reticle supplies a fixed visual reference for alignment, coarse measurement and positioning tasks. The etched crosshair enables reliable repeatability when aligning components or centring samples, which supports process control and reduces subjective variation between operators. Mechanical compatibility with the 30 mm tube standard ensures direct mounting in the iScope series without adapters, keeping the optical axis stable and minimising cumulative tolerances that can affect measurement outcomes. The reticle is suited to comparative inspection and situational alignment rather than precision metrology that requires calibrated micrometers. Compatibility and durability that reduce downtime The ocular is produced to match the iScope series’ mechanical interface and optical requirements, delivering straightforward interchangeability and consistent imaging characteristics across instruments. Robust construction and precise tube dimensions offer compatibility with common tube holders, while the wide-field design maintains comfortable eye relief for extended use. This combination of features supports efficient workflows in busy workshops and laboratories by limiting adaptation time and preserving instrument alignment, thereby contributing to continuous operation and reduced service interruptions. For reliable alignment and enhanced field coverage choose the Euromex EWF 10× eyepiece — contact Metav Werkzeuge for tailored advice and direct supply from Emmerich. Technical data Article number: IS.6210-C Product name: EWF 10x/22 mm Eyepiece with Reticle for iScope, 30 mm Tube Manufacturer: Euromex Microscopen bv Core specifications Magnification: 10× Field number: 22 mm Tube diameter: 30 mm Features and compatibility EWF wide-field eyepiece Integrated reticle (crosshair) Compatible with iScope series Suited to inspection, alignment and documentation FAQ What magnification does the eyepiece provide? The eyepiece provides 10× magnification, delivering a balance of detail and context for inspection and alignment tasks. Is the reticle suitable for measurement tasks? The integrated reticle supports repeatable alignment and comparative checks; for calibrated dimensional metrology, use dedicated measurement objectives and calibrated stages. Will this ocular fit other microscopes with 30 mm tubes? Compatibility is specified for 30 mm tube holders; the ocular is designed for iScope mounting and will fit other systems that accept the same tube diameter. How does the 22 mm field number affect inspection work? A 22 mm field number increases the visible area, reducing time spent repositioning samples and improving situational awareness during visual inspection. Which applications suit this eyepiece best? The eyepiece is ideal for alignment, inspection, documentation and general workshop microscopy where a wide field and a reticle aid workflow. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
22mm 10x Eyepiece Wide Field with Dioptre Adjustment, 22mm Field - Euromex
Take advantage of precise 10× magnification, a 22 mm field number and integrated diopter adjustment for consistent observation and reduced eye strain; order via Metav Werkzeuge or consult their specialists for assistance. EWF 10×/22 mm eyepiece for Achios‑X Observer — Euromex extra wide field eyepiece with diopter control The EWF 10×/22 mm eyepiece is a high‑clarity optical accessory designed for the Achios‑X Observer series, combining an extra wide field of view with a user‑adjustable diopter for refined focusing. EWF design for a wide field 10× magnification for detailed viewing 22 mm field number for broad overview Integrated diopter adjustment for precise focus Improved inspection throughput with consistent 10× optics The eyepiece delivers 10× magnification combined with a 22 mm field number, which yields a practical true field of view of approximately 2.2 mm at the specimen level. This balance of magnification and field size enables quicker localisation of features while retaining sufficient detail for visual inspection. The large field number reduces the need for frequent stage movement, so repetitive measurements and quality checks can be completed more efficiently. Optical terms such as field number are explained here to aid decision making: the field number denotes the diameter of the view in millimetres at the eyepiece and is a direct indicator of the apparent viewing area. Comfortable observation and precise personal focusing Equipped with an integrated diopter adjustment, the eyepiece allows individual visual correction without altering the microscope's main focus setting, which is particularly useful in shared workstations. The extra wide field (EWF) design reduces peripheral tunnel effect and eye fatigue during extended sessions, making this eyepiece suitable for routine inspection, microscopy training and documentation tasks. Compatibility with the Achios‑X Observer series ensures a smooth mechanical fit and repeatable optical alignment, helping to maintain consistent results across different operators. Reliable choice for laboratory, education and workshop environments Manufactured by Euromex, the eyepiece supports stable visual performance for laboratories, teaching rooms and production inspection. The optical characteristics make it appropriate for visual inspection, sample screening and comparator work where steady, comfortable viewing accelerates throughput. Metav Werkzeuge stands for democratisation of precision and provides logistical and technical know‑how from Emmerich; their experience and broad product range reduce procurement complexity and support uninterrupted supply to the workbench. If further technical details are required, Metav's consultants can be contacted for clarification. Contact Metav Werkzeuge to discuss integration of the Euromex EWF 10×/22 mm eyepiece with existing Achios‑X Observer equipment and to arrange procurement from stock in Emmerich Technical data Article number: AX.6010 Manufacturer: Euromex Product type: Eyepiece Model series: Achios‑X Observer Eyepiece type: EWF Facts Magnification: 10× Field number: 22 mm UID / SKU: AX.6010 Special features Diopter adjustment included Extra wide field (EWF) design Compatible with Achios‑X Observer series FAQ Is this eyepiece compatible with the Achios‑X Observer series? Yes. The eyepiece is specified for use with the Achios‑X Observer series and is designed to fit mechanically and optically with that model range. What does the 22 mm field number mean in practice? The 22 mm field number indicates the apparent viewing diameter at the eyepiece; with 10× magnification this corresponds to a true field of view of about 2.2 mm on the specimen. How does the diopter adjustment help in shared workstations? The integrated diopter adjustment permits individual users to compensate for differences in eyesight without touching the microscope’s main focus, keeping setup constant for subsequent users. Is the eyepiece suitable for teaching and demonstration purposes? Yes. The extra wide field and comfortable focusing make the eyepiece well suited to educational settings where rapid orientation and reduced eye fatigue are important. Who manufactures this eyepiece? The eyepiece is manufactured by Euromex, a recognised supplier of optical accessories for microscopes. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
22mm 10x Super Wide Field Eyepiece for Ø30mm Tube, SWF - Euromex
Benefit from the combination of 10× magnification and a 22 mm field number for quick, comfortable sample overview and efficient visual inspection; designed to fit 30 mm diameter tubes and integrate with the Delphi‑X Observer series. Order via Metav Werkzeuge or consult our specialists for application support. Super wide-field SWF 10×/22 mm eyepiece for 30 mm tube — Delphi‑X Observer compatible Super wide-field SWF 10×/22 mm eyepiece for Delphi‑X Observer provides an expanded field of view for rapid sample assessment in laboratory and teaching environments Super wide-field optical design 10× magnification for versatile use 22 mm field number for large FOV Fits 30 mm diameter microscope tube Faster inspection with a genuinely wider view The 10× magnification combined with a 22 mm field number yields a noticeably broader apparent field than standard eyepieces, allowing quicker scanning of specimens and fewer refocusing steps. This results in improved throughput for routine inspections and classroom demonstrations. The optical layout identified as super wide-field reduces the need to move slides or reposition samples, which is particularly beneficial during repetitive tasks or when documenting multiple fields of view. The larger apparent field also contributes to reduced visual fatigue during extended observation. Mechanical fit and series compatibility for streamlined workflows Engineered to fit a 30 mm tube, this eyepiece integrates smoothly into systems that accept that tube diameter and is optimised for use with the Delphi‑X Observer range. The mechanical compatibility ensures simple swapping between eyepieces and objectives, so laboratory setups remain flexible without time-consuming adjustments. For facilities standardising on the Delphi‑X platform, the eyepiece offers a stable, repeatable interface that supports consistent optical performance across instruments. Practical optical advantages for everyday use A high field number such as 22 mm directly increases the observable area through the eyepiece, which helps in tasks where context is important — for example, locating features on slides or following dynamic processes. The wide field characteristic improves visual orientation and makes it easier to compare neighbouring structures without changing magnification. As a result, operators experience a balance of situational awareness and detail resolution that suits a range of applications from routine lab work to instructional settings. Intended users and added reassurance This optical accessory is aimed at educational laboratories, quality control benches and general microscopy users who require a dependable, wide-field eyepiece for observation and inspection. The design supports efficient workflows and user comfort, two factors that contribute to consistent measurement and visual assessment quality. If further technical clarification is required regarding fit or compatibility with specific microscope models, Metav Werkzeuge’s advisers are available to provide targeted guidance. For procurement or tailored advice about integrating this eyepiece into existing equipment, contact Metav Werkzeuge — our consultants can advise on compatibility and delivery from Emmerich to your workshop Technical data SKU: DX.6210 Product: Super wide-field SWF 10×/22 mm eyepiece Type: Eyepiece Core specifications Magnification: 10× Field number: 22 mm Tube fit: 30 mm diameter Design & compatibility SWF optical design (super wide-field) For Delphi‑X Observer series Manufacturer: Euromex FAQ What magnification and field number does this eyepiece offer? The Super wide-field SWF 10×/22 mm eyepiece provides 10× magnification with a 22 mm field number, offering a larger apparent field for faster observation with the Delphi‑X Observer. Will this eyepiece fit other microscopes? It fits microscope tubes with a 30 mm diameter; other instruments with the same tube size should accept the Super wide-field SWF 10×/22 mm eyepiece, subject to mechanical tolerance. How does the 22 mm field number affect daily use? A 22 mm field number increases the observable area in each view, reducing the need to reposition specimens and improving visual context during inspection with the Super wide-field SWF 10×/22 mm eyepiece. Is this eyepiece suitable for teaching environments? Yes, the wide apparent field and comfortable 10× magnification make the eyepiece well suited to instructional use, where rapid orientation and reduced eye strain are valuable. Can this eyepiece be used with camera adapters on the Delphi‑X Observer? Compatibility with camera adapters depends on the specific adapter and optical path; the Super wide-field SWF 10×/22 mm eyepiece is designed for the Delphi‑X Observer series, and technical advice is available from Metav Werkzeuge for setup details. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
22mm 10x Super Wide Field Focusable Eyepiece for Delphi-X Inverso, 30mm Tube Diameter - Euromex
Take advantage of a super wide‑field optical design matched with 10× magnification and a 22 mm field number to improve visual throughput and reduce specimen repositioning. Order the eyepiece directly via Metav Werkzeuge for a dependable supply or consult our specialists for application advice. Superweitfeld SWF 10×/22 mm focusable eyepiece for Delphi‑X Inverso (Euromex) The Superweitfeld SWF 10×/22 mm focusable eyepiece is a high‑contrast, focusable ocular developed for the Delphi‑X Inverso series, optimised for extended observation and broad visual fields in laboratory and teaching microscopes Super wide-field optics (SWF) 10× magnification for fine detail 22 mm field number for broad view Focusable eyepiece for dioptre adjustment 30 mm tube diameter compatibility Greater visual coverage for faster inspections The optical configuration of this ocular provides a super wide-field view, which translates into fewer stage movements and faster sample surveys. With 10× magnification and a 22 mm field number, the eyepiece delivers a noticeably larger usable field compared with standard oculars; the larger apparent field reduces the need to refocus or reframe specimens, increasing throughput in repetitive inspection tasks. The design preserves edge sharpness across the field, supporting consistent measurement and documentation workflows in both research and routine quality control. Personalised focus for comfortable, prolonged use A focusable barrel enables precise dioptre compensation so each operator can adapt the view to their eyesight without additional accessories. The focus mechanism ensures the image remains sharp at the centre and periphery while reducing eye fatigue during long sessions. The ocular’s optical coating and glass selection maintain high contrast and accurate rendition of fine structures, which is particularly beneficial when working with complex samples or when switching between operators with different visual requirements. Reliable compatibility and practical workshop integration Manufactured to fit a 30 mm tube, the ocular integrates directly with the Delphi‑X Inverso series and similar stand designs, avoiding adapters and preserving optical alignment. As an Euromex accessory, the component supports consistent imaging performance and straightforward replacement in laboratory setups. If further technical details are required or compatibility with specific instruments must be checked, Metav Werkzeuge provides expert advice and transparent supply from its Emmerich base; contact via info@metav-werkzeuge.com or +49 2822 7131930 for additional specifications or batch enquiries Discuss application needs with Metav Werkzeuge’s specialists in Emmerich or request tailored compatibility advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: DI.6210 Manufacturer: Euromex Microscopen bv Facts Product type: Eyepiece Series: Delphi‑X Inverso Eyepiece type: SWF Magnification: 10× Field number: 22 Tube diameter: 30 mm Special features Focusable for dioptre adjustment Super wide‑field optics Compatible with Delphi‑X Inverso stands FAQ What magnification does this eyepiece provide? The eyepiece offers 10× magnification, delivering a detailed view suitable for inspection and teaching applications with the Delphi‑X Inverso microscopes. How wide is the usable field of view with this ocular? With a 22 mm field number, the ocular provides a broad apparent field, reducing specimen repositioning and making visual surveys faster and more efficient. Is the eyepiece adjustable for different eyesight prescriptions? Yes, the focusable design allows dioptre adjustment so the eyepiece can be tailored to individual eyesight without auxiliary lenses. Will this eyepiece fit any microscope? The ocular is designed for a 30 mm tube diameter and is intended for the Delphi‑X Inverso series; compatibility with other stands should be confirmed by checking tube diameter and mechanical fit. Who manufactures this eyepiece and what is the SKU? The eyepiece is supplied by Euromex and listed under SKU DI.6210 as an SWF focusable eyepiece for the Delphi‑X Inverso series. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
22mm 10x Wide Field Eyepiece with Micrometer and Reticle, Ø30mm Tube - Euromex
Take advantage of a combination of high-magnification optical performance and integrated measurement capability to streamline routine inspections; order the eyepiece directly via Metav Werkzeuge or consult Metav's specialists for compatibility and supply. Super wide-field SWF 10×/22 mm eyepiece with micrometer and reticle — eyepiece for Delphi‑X Observer (Euromex) The Super wide-field SWF 10×/22 mm eyepiece with micrometer and reticle is a precision optical accessory for Delphi‑X Observer models, designed for use with a Ø 30 mm tube to support measurement and visual inspection tasks. Super wide-field 22 mm field number 10× magnification for detailed observation Integrated micrometer and reticle Fits Ø 30 mm tube for Delphi‑X Observer Exceptional optical clarity for measurable inspection The eyepiece delivers 10× magnification combined with a 22 mm field number, which increases the observable area while preserving image sharpness. This wider apparent field reduces the need for frequent repositioning during inspections, so line-side checks and quality-control routines become more efficient. The optical design focuses on delivering a clear, flat field so measurements taken through the reticle remain reliable across the viewing area. Built-in micrometer and reticle for precise on-screen measurement An integrated micrometer together with a calibrated reticle turns a standard viewing accessory into a measurement-capable tool. The micrometer enables fine, reproducible adjustments while the reticle provides a clear reference for sizing and alignment tasks. These features support traceable visual measurement workflows without the immediate need for additional digital measuring attachments, helping to speed up repetitive tasks and reduce setup complexity. Seamless integration with Delphi‑X Observer systems Engineered to fit a Ø 30 mm tube, the eyepiece integrates smoothly into Delphi‑X Observer microscopes and compatible optical stands. The super wide-field characteristic maintains ergonomics during prolonged use, lowering operator fatigue and improving throughput in inspection stations. Compatibility with standard tubes ensures straightforward replacement or upgrade of existing oculars while keeping alignment and focus procedures unchanged. Practical benefits for workshop and laboratory environments As a compact optical accessory, the eyepiece supports quick measurement checks and visual assessments in workshops and labs alike. The combination of wide field and measurement capability means fewer tool changes and quicker decision cycles on the shop floor. The accessory is particularly useful where repetitive visual sizing or alignment checks are required, offering an efficient balance of observation and measurement in one component. Contact Metav Werkzeuge to discuss how the Euromex super wide-field SWF eyepiece can be integrated into existing Delphi‑X Observer setups; Metav's technical consultants in Emmerich will advise on compatibility and supply solutions tailored to workshop needs Technical data Article number: DX.6210-CM Label: Superweitfeld SWF 10x/22 mm eyepiece with micrometer and reticle for Ø 30 mm tube for Delphi‑X Observer SKU: DX.6210-CM Facts Magnification: 10× Field number: 22 mm Tube diameter: Ø 30 mm Special features Super wide-field (SWF) Integrated micrometer and reticle Compatible with Delphi‑X Observer series Manufacturer: Euromex Microscopen bv FAQ What microscopes is this eyepiece compatible with? This eyepiece fits any optical system accepting a Ø 30 mm tubeand is specifically designed for Delphi‑X Observer microscopes. Does the eyepiece provide measurement capability? Yes, the integrated micrometer and reticle enable on-eyepiece measurement and alignment for visual inspection tasks. Will the wider field improve inspection speed? The 22 mm field number increases the visible area, reducing repositioning and speeding up routine checks during inspections. Is the eyepiece supplied by a recognised manufacturer? The eyepiece is produced by Euromex and specified for use with Delphi‑X Observer series equipment. How is the eyepiece mounted and replaced? Mounting is via a Ø 30 mm tube interface; replacement follows standard ocular swap procedures for Delphi‑X Observer stands. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
22mm 10x Widefield Eyepiece for bScope Ø30mm Tube, WF Optics - Euromex
Take advantage of the combination of wide-field clarity, precise 10× magnification and a standard Ø30 mm tube fit for a smooth inspection workflow; order the eyepiece directly via Metav Werkzeuge or ask our consultants if needed. WF 10x/22 mm eyepiece for bScope microscopes — wide-field 10×, 22 mm field number (Euromex) The WF 10x/22 mm eyepiece for bScope microscopes delivers a wide observation field optimised for material science and fluorescence applications with a Ø 30 mm tube fit Wide-field view with 22 mm field number Fits bScope microscopes with a 30 mm tube bScope microscopes High-contrast optics for material and fluorescence Engineered for a wider, more comfortable view The wide-field design with a 22 mm field number provides a noticeably larger apparent field than standard oculars, which reduces the need for frequent stage movement during inspections. At 10× magnification, finer details become easier to evaluate while maintaining a comfortable viewing experience. The field number describes the diameter of the intermediate image in millimetres; a larger value means more of the specimen is visible at once, improving throughput during visual checks and sample screening. Straightforward mechanical compatibility saves time Built for the bScope series, the eyepiece matches microscopes with a Ø30 mm tube, enabling quick swaps and standardised setups across an inspection bench. The standard tube diameter ensures secure seating in the eyepiece tube and consistent optical alignment, which lessens adjustment time between tasks. This mechanical fit supports efficient workflows in laboratory and workshop environments where instrument interchangeability matters for productivity. Optical characteristics that support material and fluorescence work Optimised for material science and fluorescence inspection, the ocular delivers an even, high-contrast image suited to highlighting structural features and emission signals. While an eyepiece primarily determines field of view and comfort, its interaction with the objective and illumination affects overall image readability; using a wide-field ocular helps retain context when switching objectives or scanning larger areas, which is beneficial for defect detection and comparative analysis. Practical benefits for routine laboratory and workshop use As a compact and purpose-focused accessory, the eyepiece offers cost-effective enhancement of existing microscopes without extensive reconfiguration. The simple specification—10× magnification, 22 mm field number, and Ø30 mm tube—makes inventory management straightforward and procurement predictable. For shops and test labs seeking accessible precision, this option supports repeatable visual inspections and reduces downtime related to eyepiece changes. Contact Metav Werkzeuge today to request the Euromex WF 10x/22 mm eyepiece (BS.6310) for integration into bScope microscope setups or to obtain tailored advice from the Metav consultants at the Emmerich site. Technical Data Article number: BS.6310 Label: WF 10x/22 mm eyepiece for bScope material science and fluorescence models with Ø 30 mm tube Product type: Eyepiece Model series: bScope Manufacturer: Euromex Facts Magnification: 10× Field number: 22 mm Tube diameter: Ø 30 mm SKU: BS.6310 Special features Wide-field (WF) eyepiece Intended for material science and fluorescence applications Compatible with bScope microscopes Manufacturer: Euromex FAQ What magnification and field of view does this eyepiece provide? The eyepiece provides 10× magnification with a 22 mm field number, giving a wider apparent field suited to scanning and comparison tasks. Will this fit all bScope models? This eyepiece is designed for bScope microscopes with a Ø 30 mm tube; compatibility is determined by the eyepiece tube diameter. Is this eyepiece suitable for fluorescence imaging? Yes, the wide-field geometry and 22 mm field number make the eyepiece appropriate for fluorescence applications where a larger field aids observation. What is the product SKU and brand? The product is BS.6310 from Euromex, listed as a WF 10x/22 mm eyepiece for bScope. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
22mm 10x Widefield Eyepiece With 10/100 Micrometer For bScope Ø30mm Tubus - Euromex
Taking advantage of the 10× magnification and a 22 mm field number, this eyepiece delivers reliable visual context and an integrated 10/100 micrometre scale for routine measurement tasks; combine optical clarity, straightforward compatibility with bScope systems and robust construction for uninterrupted lab workflows. Order the WF 10x/22 mm eyepiece directly via Metav Werkzeuge or ask our consultants if needed. WF 10x/22 mm eyepiece with 10/100 micrometre – Euromex bScope eyepiece (30 mm tube) A WF 10x/22 mm eyepiece built for materials science and fluorescence inspection on bScope models, providing a wide field of view and an integrated micrometre for inline measurement. Wide-field WF 10× magnification, 22 mm field number Integrated 10/100 micrometre scale for precise measurement Compatible with bScope 30 mm tube microscopes Durable optical construction by Euromex Accurate measurement without extra accessories The integrated 10/100 micrometre scale reduces handling steps by enabling immediate readings at the eyepiece, which speeds up repetitive checks in materials characterisation. With a dedicated measurement reticle incorporated into the optic, clinicians and technicians benefit from a direct visual reference that supports precision documentation and traceable inspection routines. This reduces dependence on external gauges while maintaining consistent measurement intervals for routine quality control. Wider field for faster sample assessment Thanks to the 22 mm field number combined with 10× magnification, the eyepiece presents a generous field of view that accelerates sample navigation and reduces slide adjustments. The wide-field design makes it easier to locate features of interest and to maintain situational awareness when scanning heterogeneous specimens. Improved visual coverage translates into fewer stage movements and a more efficient analysis process for both fluorescence and materials examinations. Designed for straightforward integration with bScope systems Compatibility with the bScope series and the specified 30 mm tube diameter ensures a secure, optical-fit installation without the need for adapters. The eyepiece’s mechanical dimensions and optical alignment are tuned to slot directly into bScope material science and fluorescence models, preserving the instrument’s parfocality and overall imaging geometry. This compatibility streamlines upgrades and replacements within laboratory fleets. Robust optics for everyday laboratory use Manufactured by Euromex, the eyepiece is intended for frequent use in workshop and laboratory environments where dependable performance matters. The optical construction focuses on clarity and longevity rather than decorative finishes, supporting repetitive inspections and classroom demonstrations alike. Cleaning and routine maintenance are straightforward, preserving optical quality and measurement integrity over the long term. Practical choice for consistent workflows Selecting an eyepiece with an integrated reticle delivers a pragmatic balance of convenience and technical function: fewer instrument changes, quicker verifications and clearer documentation. As part of a precision-oriented setup, this solution supports standardised procedures and helps maintain throughput in production or research settings while contributing to overall reliability of visual inspection data. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss compatibility, request technical advice or arrange ordering for this Euromex WF 10x/22 mm eyepiece Technical data SKU: BS.6310-M Item: WF 10x/22 mm eyepiece with 10/100 micrometre Series: bScope Manufacturer: Euromex Core specifications Magnification: 10× Field number: 22 mm Tube diameter: 30 mm Special features Wide-field (WF) eyepiece Integrated 10/100 micrometre scale Compatible with fluorescence and materials science models For 30 mm tube microscopes FAQ What measurements can be read with this eyepiece? The integrated 10/100 micrometre reticle in the WF 10x/22 mm eyepiece allows direct visual measurement at the eyepiece for routine sizing and comparative checks. Is this eyepiece compatible with other microscope brands? The eyepiece is specified for bScope models with a 30 mm tube diameter; compatibility with other brands depends on tube diameter and optical system and should be verified before use. Can the eyepiece be used for fluorescence work? Yes, the WF 10x/22 mm eyepiece is intended for materials science and fluorescence applications within the bScope range and maintains a wide field suitable for fluorescence observation. How should the eyepiece be cleaned and maintained? Clean the optical surfaces with recommended lens tissue and appropriate cleaner; the Euromex eyepiece is designed for routine maintenance to preserve optical quality and measurement accuracy. What is the product SKU for ordering or reference? Refer to SKU BS.6310-M when ordering or requesting technical details about the Euromex WF 10x/22 mm eyepiece. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
22mm 10x Widefield Eyepiece with Pointer, 30mm Tube - Euromex
Take advantage of the combination of 10x magnification, a 22 mm field number and the integrated pointer for quicker specimen identification and smoother workflow; order directly via Metav Werkzeuge or contact their consultants for technical advice. EWF 10x/22 mm eyepiece with pointer for iScope (30 mm tube) — Euromex The EWF 10x/22 mm eyepiece with pointer is a wide-field optical accessory designed to enhance observation and annotation on iScope microscopes with a 30 mm tube. EWF 10x magnification for clear observation Wide 22 mm field number for broad view Integrated pointer for precise specimen marking Fits iScope microscopes with 30 mm tube Faster inspections through a wider, clearer view A 10x eyepiece with a 22 mm field number increases the visible area without sacrificing detail, which shortens inspection times and reduces the need for frequent stage movement. The wide field reduces eye strain during prolonged use and accelerates tasks such as counting, screening and alignment. For laboratories and training rooms, this translates into higher throughput and more consistent results when working with routine samples. Pinpoint accuracy when marking or teaching specimens The built-in pointer offers a direct visual cue within the field of view, making it easier to indicate points of interest during demonstrations or while documenting findings. This simple mechanical aid removes ambiguity when colleagues view images together or when recording annotated images for reports. The pointer also supports efficient training sessions, where exact localisation is essential for clear communication. Plug-and-play compatibility for minimal downtime Designed for the iScope series and sized for a 30 mm tube, the eyepiece installs quickly and requires no additional adaptors on compatible instruments. The standardised fit ensures straightforward interchangeability between instruments of the same series, reducing instrument downtime and spare-part complexity. Compatibility like this supports uninterrupted operation on production lines and in educational settings. Reliable optical design for everyday workshop and laboratory use Manufactured to meet industry expectations for clarity and consistency, the eyepiece is engineered for frequent handling and routine maintenance. The optical design prioritises durability and simple cleaning procedures, so the accessory remains effective over long service intervals. This robustness supports confidence in daily use and aligns with procurement strategies that favour dependable, low-maintenance components. For reliable optical accessories and professional advice, contact Metav Werkzeuge — Metav’s consultants can confirm fitment for your iScope and provide purchasing guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: IS.6210-P Label: EWF 10x/22 mm eyepiece with pointer for iScope, 30 mm tube Manufacturer: Euromex Product type: Eyepiece Series: iScope UID: IS.6210-P Facts Magnification: 10x Field number: 22 mm Tube diameter: 30 mm Special features EWF eyepiece type Integrated pointer for specimen marking Compatibility with iScope microscope series Designed for routine laboratory and educational use FAQ Is this eyepiece compatible with all iScope models? Compatibility depends on the tube diameter and eyepiece holder design; the EWF 10x/22 mm eyepiece is intended for iScope models with a 30 mm tube and will fit those instruments accordingly. Can the pointer be adjusted or removed? The integrated pointer is a fixed aid intended for precise marking within the field of view; adjustments are limited by design, and removal is not recommended as it may affect optical alignment. How does the 22 mm field number affect observation? A 22 mm field number delivers a wide field of view that speeds up sample scanning and reduces the need for frequent repositioning, improving efficiency during routine inspections. What cleaning and maintenance are recommended for this eyepiece? Regular cleaning with a soft, lint-free cloth and appropriate optical cleaning fluid is recommended; avoid solvents on the housing and ensure the eyepiece is stored in a dust-free case when not in use. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
22mm 10× HWF Eyepiece Pair for NexiusZoom, Wide Field - Euromex
Take advantage of 10× magnification and a 22 mm field number to increase inspection speed and reduce refocusing. The matched eyepiece pair ensures balanced stereo viewing in NexiusZoom systems — order directly via Metav Werkzeuge or consult our specialists for integration advice. Pair of HWF eyepieces 10×/22 mm for NexiusZoom — Euromex eyepiece pair A pair of HWF eyepieces 10×/22 mm expands the usable field and improves visual comfort for NexiusZoom microscopes, making it suitable for routine inspection and detailed observation. 10× magnification for clear detail Wide 22 mm field number for greater overview Matched pair optimised for binocular viewing Faster, more reliable inspection through consistent 10× magnification Consistent 10× magnification provides a familiar scale across visual checks, enabling quicker detection of defects without repeated calibrations. The optical design maintains sharpness across the image circle, so routine measurements and assessments proceed with less repositioning. For users switching between samples, the steady enlargement reduces interpretation errors and shortens inspection cycles, supporting higher throughput in small labs and production benches. Larger field number reduces overview time and increases context A 22 mm field number means a noticeably wider visible area through the eyepieces, enabling a broader context for each view. This wider field decreases the need for stage movement when scanning samples and helps operators spot surrounding features at a glance. In practical terms, the expanded view speeds up sorting and documentation tasks, while maintaining sufficient resolution for detailed inspection where needed. Matched pair design for comfortable, balanced binocular use Delivered as a matched eyepiece pair, the set ensures symmetrical optical performance for both ocular channels, reducing visual strain during extended sessions. Balanced optics support accurate stereo perception when the microscope is used in binocular mode and help maintain a natural depth impression. The configuration is particularly suitable for quality-control environments where repetitive inspection demands both comfort and precision. Seamless compatibility with NexiusZoom systems and ESD versions Engineered for integration with NexiusZoom and NexiusZoom ESD series, these eyepieces fit existing optical tubes without the need for additional adapters. Compatibility with ESD variants supports safe use in electrostatic-sensitive workstations, preserving instrument reliability. For upgrades or replacements, the modular nature of the eyepieces simplifies maintenance and keeps downtime to a minimum. For tailored advice on integrating these eyepieces into an existing setup or for assistance selecting the correct ocular configuration, contact Metav Werkzeuge — consultation and procurement support are available directly from our Emmerich office. Technical Data Article number: NZ.6010 Label: Paar HWF-Okulare 10×/22 mm für NexiusZoom. Product type: Eyepiece pair Brand: Euromex Facts Magnification: 10× Field number: 22 mm Number of eyepieces: 2 Special features Optical type: HWF eyepiece (wide field) Compatible series: NexiusZoom; NexiusZoom ESD SKU: NZ.6010 FAQ What magnification do these eyepieces provide? The eyepieces deliver 10× magnification, which is suitable for detailed inspection while retaining a practical working distance for typical laboratory tasks. Will these eyepieces fit a NexiusZoom ESD microscope? Yes, the eyepiece pair is specified as compatible with NexiusZoom ESD series and is designed for direct fit without extra adapters. How does the 22 mm field number affect inspection work? A 22 mm field number increases the visible area through the eyepiece, reducing the need for frequent stage movement and speeding up visual surveys of samples. Are these eyepieces supplied as a matched pair? Yes, the unit is sold as a matched eyepiece pair, ensuring balanced optical performance for binocular viewing. Is this product suitable for prolonged inspection sessions? The matched optical components and wide field support comfortable binocular use, helping to minimise fatigue during extended observation periods with the NexiusZoom system. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Achios-X Observer Binocular Microscope EWF 10x Eyepieces Plan PLi Objectives 4/10/40/100x Oil, NeoLED Kohler Lighting - Euromex
Take advantage of sharp, flat-field optics and stable, even illumination for consistent results in teaching and routine laboratory work; order the Achios‑X Observer microscope directly via Metav Werkzeuge or ask our consultants for technical advice. Achios‑X Observer binocular microscope AX.1152-PLi — EWF 10x/22 mm eyepieces & plan PLi objectives (Euromex) A Achios‑X Observer binocular microscope designed for laboratory teaching and routine analytical work, combining wide-field eyepieces with a 5-position objective turret and Köhler illumination for reliable, high-contrast imaging. EWF 10x/22 mm eyepieces for a wide field of view Plan PLi objectives for flat, corrected images 5-position turret including oil immersion objective NeoLED Köhler illumination with Smart Light Control High‑performance optics for clear, distortion‑free images The optical train centres on EWF (extra wide field) 10x/22 mm eyepieces and plan PLi objectives, providing a large visual field and a flat image across the entire viewing area. The supplied objective set (4/10/S40/S100x) covers low to high magnifications; the S100x oil objective enables high‑resolution observation of fine structural detail when used with immersion oil. Plan correction means that specimens remain in focus from centre to edge, reducing the need for frequent refocusing and supporting efficient workflow in teaching rooms and quality‑control benches. This combination of eyepieces and objectives yields reproducible, easy‑to‑interpret images with reduced optical aberrations. Stable illumination and precise light control for repeatable results Illumination is provided by a 3 W NeoLED Köhler illumination system, which delivers an even, glare‑free field and consistent colour temperature across sessions. Smart Light Control stabilises brightness and allows fine adjustment without thermal drift, so image contrast remains steady during prolonged examinations. LED illumination also offers long service life and low power consumption, improving laboratory uptime and reducing maintenance intervals. For contrast‑sensitive applications the Köhler setup ensures uniform background lighting, simplifying image documentation and photographic capture. Practical design geared towards routine laboratory use The instrument’s binocular head and ergonomic layout support comfortable, extended observation, while a 5‑position objective turret enables rapid switching between magnifications. The stage without a protruding rack provides unobstructed slide movement and a lower risk of accidental snagging, which benefits both educational settings and routine inspections. The EIS objectives and oil immersion option expand the microscope’s applicability to demanding tasks where higher numerical apertures are required. Built for reliability, the configuration supports repeatable measurements and efficient specimen throughput in busy environments. Speak to Metav Werkzeuge for tailored technical guidance and to secure the Achios‑X Observer AX.1152-PLi with NeoLED Köhler illumination — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: AX.1152-PLi Product label: Achios-X Observer binocular microscope with EWF 10x/22 mm eyepieces, 5-position turret with plan PLi 4/10/S40/S100x oil EIS objectives, stage without protruding rack and 3 W NeoLED Köhler illumination with Smart Light Control Manufacturer: Euromex Product type: microscope Model series: Achios-X Observer Microscope head: binocular Core specifications Eyepiece type: EWF Eyepiece field number (mm): 22 Eyepiece magnification (x): 10 Objective magnifications (x): 4/10/S40/S100x Special features 5-position objective turret plan PLi objectives Oil immersion objective included EIS objective series Stage without protruding rack 3 W NeoLED Köhler illumination Smart Light Control FAQ What magnification range does the instrument cover? The supplied objective set provides 4x, 10x, 40x (S) and 100x oil magnifications; combined with the 10x eyepieces this enables standard observations from low to high power using the Achios‑X Observer AX.1152-PLi. Is the illumination suitable for photomicrography and documentation? Yes, the 3 W NeoLED Köhler illumination with Smart Light Control offers uniform lighting and stable output, which supports consistent image capture and documentation workflows. Does the instrument include an oil immersion objective and how is it used? The configuration lists an S100x oil objective; immersion oil is used between objective and cover slip to increase numerical aperture and resolution for fine structural detail. How does the stage design benefit routine handling of slides? The stage without a protruding rack reduces the risk of slides catching or being knocked during transfer, improving safety and speeding up routine sample handling. Which eyepieces deliver the large field of view and what advantage does this provide? The EWF 10x/22 mm eyepieces give an extended field number, allowing more of the specimen to be seen at once and reducing the need to pan across large samples when using the Achios‑X Observer. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
22mm EWF 10x Eyepiece With 10/100 Micrometer And Reticle, 30mm Tube - Euromex
Take advantage of precise visual measurement and smooth microscope integration offered by the EWF 10x/22 mm Eyepiece. Combining wide-field optics with an integrated 10/100 micrometer and reticle, it supports efficient inspection workflows for laboratory and workshop environments. Order the eyepiece directly via Metav Werkzeuge or consult our specialists for specification matching. EWF 10x/22 mm Eyepiece, 30 mm Tube for iScope (10/100 Micrometer & Reticle) The EWF 10x/22 mm Eyepiece is a wide-field ocular for iScope microscopes, designed to deliver a broad visual field and calibrated reference markings for metrological and quality-control tasks. Wide-field EWF eyepiece, 22 mm field number 10× magnification for general inspection 30 mm tube diameter for iScope fitting Integrated 10/100 micrometer and reticle Measure reliably with wide-field optics and a built-in scale The combination of 10× magnification and a 22 mm field number yields a broader viewing area than standard oculars, reducing the need for constant repositioning during inspection. The built-in 10/100 micrometer and reticle provide immediate visual reference marks, enabling calibrated comparisons and repeatable observations without additional accessories. For technicians and laboratory staff, this translates into fewer handling steps and a more consistent inspection routine, while the wide-field design supports rapid orientation of specimens and clearer context for measured features. Seamless fit and dependable mechanical compatibility A 30 mm tube diameter ensures secure seating in microscopes designed for that standard, notably the iScope series. The eyepiece’s EWF design is tailored to fit into common tube holders used in benchtop and inspection microscopes, avoiding unwanted play or misalignment that can compromise readings. Where a precise mechanical interface is required, the ocular’s dimensions and reticle integration permit stable mounting and straightforward swapping between objectives or instruments, supporting uninterrupted measurement sequences on the production line or in the metrology lab. Practical benefits for inspection and quality control workflows Beyond optical specifications, the ocular contributes to operational efficiency: the integrated reticle acts as a visual anchor for alignment tasks and surface comparisons, while the micrometer marking allows for quick scale checks during routine inspection. The eyepiece is well suited for workshops and quality departments that need dependable, repeatable visual measurement without complex setup. Backed by Euromex’s reputation for optical instruments and Metav’s commitment to accessible precision, the accessory supports a measurable improvement in day-to-day inspection reliability. For tailored advice on integrating this Euromex eyepiece into existing equipment and for procurement via Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: IS.6210-CM Manufacturer: Euromex Model series: iScope Product type: Eyepiece (ocular) Eyepiece type: EWF Facts Magnification: 10× Field number: 22 mm Tube diameter: 30 mm SKU: IS.6210-CM Special features Integrated 10/100 micrometer Reticle (crosshair) Wide-field optic design Compatibility: iScope series FAQ Is this eyepiece compatible with iScope microscopes? The eyepiece is specified for the iScope model range and fits instruments that accept a 30 mm tube diameter; compatibility with individual microscope variants should be confirmed against the instrument’s eyepiece holder dimensions. What does a 22 mm field number mean in practice? A 22 mm field number denotes a wider usable view through the ocular, delivering a larger scene at 10× magnification which reduces the need for frequent sample repositioning during inspection. Can measurements be taken directly with the integrated micrometer? The integrated 10/100 micrometer provides reference graduations and a reticle for comparative and calibrated observations; for traceable dimensional measurement, cross-check with calibrated stage micrometers or instrument-specific calibration procedures. Is the reticle suitable for alignment and comparative inspection? Yes — the built-in reticle (crosshair) offers fixed reference lines that assist with alignment, centring and visual comparison tasks in quality-control workflows. How should the eyepiece be mounted into the microscope? Insert the eyepiece into a compatible 30 mm eyepiece tube and ensure it seats squarely without tilt; secure the holder according to the microscope manufacturer’s instructions to avoid movement that could affect readings. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com