High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
22mm HWF Eyepiece 10× With 10/100 Micrometer Scale And Reticle - Euromex
Take advantage of precise scale readings, a wide 22 mm field number and an integrated 10/100 eyepiece micrometer to speed up inspection workflows; order the module directly via Metav Werkzeuge or ask the consultants for integration advice. HWF eyepiece 10×/22 mm with eyepiece micrometer 10/100 and reticle — Measurement eyepiece for NexiusZoom series The HWF eyepiece 10×/22 mm with eyepiece micrometer 10/100 and reticle is a purpose-built measurement eyepiece designed for reliable, repeatable readings in inspection and quality-control tasks on NexiusZoom microscopes 10× magnification for clear readings 22 mm field number for wide view Integrated 10/100 micrometer scale Built-in reticle for alignment Precise measurements where they matter The HWF design delivers a wide field of view combined with comfortable magnification, so measurement tasks can be carried out more quickly and with fewer reframing steps. The integrated eyepiece micrometer (10/100) provides a calibrated scale in the image plane, enabling linear measurements without additional external gauges. In practical terms, this means a reduction in handling time and a clearer audit trail for inspection protocols. The layout of the scale and reticle supports repeatable positioning for comparative checks. Easy integration into existing inspection setups Compatibility with the NexiusZoom and NexiusZoom ESD series ensures straightforward retrofitting into common benchtop microscope systems. The eyepiece is a single-unit replacement that maintains optical alignment and preserves working distance, so downtime during exchange is minimal. Where system traceability is required, the micrometer scale simplifies documentation of measured values and supports cross-checks against stage micrometers or calibrated references for quality assurance. Robust design for routine workshop use Constructed for regular laboratory and workshop environments, the ocular offers stable optical performance for repetitive use. The HWF format reduces eye strain during extended inspections and the fixed 10× magnification is a practical compromise between field width and detail. The reticle supports centring and angular alignment tasks, beneficial where parts must be measured at defined orientations. For specialised applications or further calibration data, technical enquiries are welcome; Metav Werkzeuge can supply additional measurement instructions and verification options For technical integration or to discuss specification matching, contact Metav Werkzeuge — Metav Werkzeuge GmbH can advise on fitting the Euromex measurement eyepiece into NexiusZoom systems; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: NZ.6010-CM Label: HWF eyepiece 10×/22 mm with eyepiece micrometer 10/100 and reticle Type: Measurement eyepiece Manufacturer: Euromex Compatible series: NexiusZoom; NexiusZoom ESD UID: NZ.6010-CM Facts Magnification: 10× Field number: 22 mm Micrometer scale: 10/100 Number of eyepieces: 1 Features HWF eyepiece type Integrated eyepiece micrometer Built-in reticle Designed for NexiusZoom series FAQ What measurement capability does the eyepiece provide? The eyepiece includes an integrated 10/100 eyepiece micrometer that enables calibrated linear readings directly in the image plane with usable reticle marks for alignment. Is this eyepiece compatible with existing NexiusZoom microscopes? Yes, the measurement eyepiece is compatible with the NexiusZoom and NexiusZoom ESD series and is intended as a direct ocular replacement for measurement tasks. How does the HWF type improve inspection workflows? The HWF configuration offers a wide field of view and comfortable magnification, which reduces repositioning and speeds up visual inspections while maintaining measurement accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm HWF Eyepiece 10× with Reticle, Compatible with NexiusZoom Series - Euromex
Take advantage of the combination of rapid visual alignment and a wide observational field for reliable, efficient inspection workflows; order this accessory directly via Metav Werkzeuge or consult our specialists for integration advice. Euromex HWF reticle eyepiece 10×/22 mm (NZ.6010-C) — 10× magnification, 22 mm field number Euromex HWF reticle eyepiece 10×/22 mm is a wide-field ocular with an integrated crosshair, designed for precise positioning and repeatable visual measurement in industrial and laboratory microscopes 10× magnification for detailed observation 22 mm field number for a wider view Integrated crosshair for precise alignment Compatible with NexiusZoom and NexiusZoom ESD series Faster, measurable alignment with an integrated crosshair The integrated crosshair turns visual inspection into a measurable task: the reticle provides a clear reference for component positioning and quick alignment during assembly or quality checks. At 10× magnification the image remains sharp while the 22 mm field number ensures a generous field of view; this combination reduces repositioning and accelerates routine inspections. The reticle design is best described as a simple visual grid that can be used for repeatable alignment and basic comparative measurements without additional equipment, improving throughput in production environments. A wide-field design that shortens inspection time The HWF format delivers a wide field image so examples of microscopic features are easier to locate and track; this reduces time spent panning and refocusing. The eyepiece’s layout is optimised for use with modern zoom stand optics, so the observer benefits from comfortable eye relief and a stable image across the field. Compatibility with the NexiusZoom series (including ESD variants) makes the eyepiece a practical upgrade for microscope stations focused on electronics inspection, small-part assembly or routine laboratory analysis, raising operational efficiency without complex adjustments. Simple integration, robust daily performance As a single reticle eyepiece unit, the accessory is straightforward to fit and replace in compatible microscopy systems and is intended for everyday industrial use. The design supports repeatable positioning workflows and requires only standard cleaning and handling to maintain optical clarity; routine maintenance consists of lens cleaning with appropriate solvents and protection from scratches. The ocular is supplied as a single eyepiece module and was developed to be a reliable visual aid in environments where quick visual checks and repeatable alignment save time and reduce errors. For integration advice or to order this Euromex accessory for use with NexiusZoom stations, contact Metav Werkzeuge for personalised guidance and supply options Technical data Article number: NZ.6010-C Product name: HWF reticle eyepiece 10×/22 mm Manufacturer: Euromex Core specifications Magnification: 10× Field number: 22 mm Eyepiece count: 1 Compatibility & special features Fits NexiusZoom; NexiusZoom ESD HWF type (wide-field) eyepiece Integrated crosshair (reticle) FAQ Is this eyepiece compatible with NexiusZoom microscopes? Yes. The eyepiece is compatible with the NexiusZoom and NexiusZoom ESD series and can be fitted as the visual reticle module for those stands. Can the crosshair be used for simple measurements or scaling? The integrated crosshair in the Euromex HWF reticle eyepiece 10×/22 mm provides a fixed reference for alignment and comparative checks; it is suitable for repeatable positional verification though not a substitute for calibrated measurement instrumentation. How should the eyepiece be cleaned to preserve optical quality? Use lint-free cloths and recommended optical solvents; the eyepiece should be handled gently to avoid scratching the glass and stored in a dust-free environment when not in use. Is the eyepiece suitable for ESD-sensitive assemblies? Yes. Compatibility with the NexiusZoom ESD series indicates suitability for ESD-protected workstations when installed on the corresponding microscope model. Can this eyepiece replace a standard ocular for general inspection work? The reticle eyepiece serves both as a visual ocular and as an alignment aid; it is well suited to general inspection tasks where an integrated reference mark adds value. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Trinocular Material Science Microscope 10x Eyepieces, Plan Semiapochromat 5/10/20x & Plan Apochromat 50x Objectives, NeoLED Köhler Illumination - Euromex
Benefit from a combination of high optical precision and versatile illumination that speeds up material analysis while protecting delicate samples. The integrated Smart Light Control and a 3 W NeoLED Köhler illumination system deliver consistent contrast for reliable results — order the Achios‑X Observer via Metav Werkzeuge or consult our specialists for tailored configurations. Achios‑X Observer trinocular material‑science microscope with Smart Light Control and NeoLED illumination Achios‑X Observer is a trinocular microscope designed for material science inspection, offering a versatile objective set and controlled Köhler illumination for brightfield and darkfield applications Trinocular head for digital imaging EWF 10x/22 mm wide‑field eyepieces Plan semiapochromatic and apochromatic objectives 3 W NeoLED Köhler BF/DF with Smart Light Control High‑precision optics for material analysis and consistent measurement The observation system combines EWF 10x/22 mm wide‑field eyepieces with a five‑position objective turret that includes plan semiapochromatic SAMPLi 5/10/20x and a plan apochromatic APLi 50x objective. This optical configuration reduces field curvature and chromatic errors, so the instrument produces flatter, more colour‑accurate images across the field of view. For laboratories and workshops that require repeatable inspection, the corrected optics help to minimise interpretation errors and support confident material science assessment. Controlled illumination that reveals fine structure without sample damage A dedicated 3 W NeoLED Köhler illumination unit supplies homogeneous light for both brightfield and darkfield contrast modes (BF/DF), while the Smart Light Control system enables stable intensity settings and reproducible lighting conditions between sessions. Even delicate surfaces benefit from lower heat output compared with conventional lamps, and users gain clearer edge and surface detail which simplifies defect recognition and metallographic evaluation. The lighting design therefore contributes directly to faster decision‑making in quality control workflows. Workflow advantages for documentation and digital imaging The trinocular head supports simultaneous eyepiece observation and camera attachment, making this instrument well suited to documentation tasks and image archiving. The absence of a protruding mechanical stage rack — the stage without protruding rack — improves operator comfort and prevents sample interference during long inspection runs. The M26 interface provides a standardised mechanical connection for eyepiece‑mounted cameras or accessories, facilitating quick integration into existing imaging chains and preserving alignment for comparative analysis. Robust design focused on laboratory ergonomics and longevity Built for routine material inspection, the stand and mechanical elements prioritise steady focus and repeatability. The combination of plan‑corrected objectives and a stable mechanical configuration reduces the need for frequent recalibration, which keeps downtime low and productivity high. With optics and illumination engineered for long service intervals, the instrument supports both detailed research tasks and repetitive quality checks without compromising image integrity. Discuss configurations and delivery with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to arrange a supply of the Euromex Achios‑X Observer tailored to workshop or laboratory needs Technical Data SKU: AX.1053-APLMRi Model series: Achios‑X Observer Product type: Microscope Manufacturer: Euromex Head type: Trinocular Data Eyepiece magnification: 10x Eyepiece field number: 22 mm Objective magnifications: 5x, 10x, 20x, 50x Objective turret: 5‑position Illumination power: 3 W NeoLED Interface: M26 Special features EWF eyepieces Plan semiapochromatic SAMPLi objectives Plan apochromatic APLi 50x objective Brightfield and darkfield (BF/DF) capability Smart Light Control for stable illumination Stage without protruding rack FAQ What imaging workflows is this microscope suited for? The Achios‑X Observer trinocular microscope from Euromex (SKU AX.1053‑APLMRi) is designed for material‑science inspection and documentation workflows, supporting both visual observation and camera capture via the trinocular port. Can the illumination be matched between sessions for comparative studies? Yes. The NeoLED Köhler illumination with Smart Light Control on the Achios‑X Observer provides stable, reproducible lighting settings, suitable for repeat comparative imaging in quality control. Are the objectives corrected for flatness and colour fidelity? The instrument includes plan semiapochromatic SAMPLi objectives and a plan apochromatic APLi 50x objective, which reduce field curvature and chromatic aberration to improve image flatness and colour accuracy. Does the microscope support digital camera attachment? The trinocular head and M26 interface allow integration of eyepiece‑mounted cameras and accessories for digital imaging and archiving with the Achios‑X Observer. What is the benefit of a stage without a protruding rack? A stage without a protruding rack reduces sample interference and improves operator ergonomics during handling and prolonged inspections, keeping workflows smoother and safer. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
22mm Widefield 10x Eyepiece For Achios Inverted, WF Optics - Euromex
The combination of a wide-field design and 10× magnification delivers a noticeably broader observation area and improved scanning efficiency for inverted setups; this makes routine inspection faster and less fatiguing. Order the eyepiece directly via Metav Werkzeuge or consult our product specialists for compatibility and supply. Euromex Wide-field WF 10×/22 mm eyepiece for Achios Inverted Wide-field WF 10×/22 mm eyepiece for Achios Inverted is a purpose-designed ocular for Achios inverted microscopes, offering an expanded visual field for faster sample assessment and smoother workflow. Wide 22 mm field number for broader view 10× magnification for general laboratory observation Designed for Achios inverted microscopes Euromex optical quality See more of the sample with reduced repositioning The wide-field construction increases the usable field of view, indicated by the 22 mm field number, which means considerably more of the specimen is visible at once compared with standard eyepieces. With 10× magnification, this ocular keeps a familiar working magnification while expanding the visible area, so routine tasks such as scanning slides or locating features proceed with fewer stage movements. This improves throughput and reduces time spent on repetitive repositioning, a clear productivity gain for laboratories and teaching environments. Comfortable observation that supports longer sessions A larger field number helps the eye to take in more context per glance, which decreases visual strain during prolonged examination. The wide-field design also contributes to stable image perception when moving between different positions on the stage, supporting consistent focus and orientation. These ergonomic benefits translate into a more efficient working rhythm for technicians and researchers who conduct extended observation or repetitive inspection tasks. Seamless integration and dependable optics for inverted applications Engineered for use with Achios inverted systems, the eyepiece matches the optical path and mechanical fittings typical of this range, ensuring straightforward replacement or upgrade. The ocular is part of Euromex's established optical line and is intended to maintain consistent image geometry and optical clarity across the field. For users upgrading an optical train or standardising equipment across benches, the compatibility with inverted configurations simplifies inventory and supports reliable, repeatable imaging results. For precision observation with Euromex optics, contact Metav Werkzeuge in Emmerich for tailored advice and order processing via info@metav-werkzeuge.com or by telephone on +49 2822 7131930, where consultants can confirm fitment and delivery options. Technical data Article number: AI.6010 Product designation: Wide-field WF 10×/22 mm eyepiece for Achios Inverted Product type: Eyepiece Manufacturer: Euromex Microscopen bv Core specifications Magnification: 10× Field number: 22 mm Eyepiece type: WF (wide-field) Special features Compatibility with Achios inverted microscopes Euromex optical design Ocular intended for general laboratory observation FAQ Is this eyepiece compatible with non-Achios inverted models? Compatibility depends on the eyepiece tube diameter and mechanical fitting; the Euromex wide-field WF 10×/22 mm eyepiece (AI.6010) is optimised for Achios inverted systems but may fit other microscopes with the same eyepiece fitting. What does a 22 mm field number mean in practice? A 22 mm field number describes the diameter of the field stop at the eyepiece and correlates to a larger visible area at a given magnification, so the operator sees more of the specimen without changing the objective or stage position. Will the 10× eyepiece change image quality from existing objectives? The eyepiece preserves the intrinsic image delivered by the objective while expanding the observable field; the 10× magnification maintains standard visual scaling, and optical performance aligns with Euromex specifications for clear imagery. Can this eyepiece be used for routine teaching and inspection tasks? Yes, the wide-field ocular is well suited to teaching, quality control and routine inspection where efficient scanning and reduced repositioning are beneficial. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
22mm Widefield Eyepiece 5x, WF Optical Pair - Euromex
Take advantage of the combination of wide-field optics, clear low-power scanning and simple procurement for uninterrupted inspection and teaching workflows. Order the eyepiece pair directly via Metav Werkzeuge or ask the consultants for compatibility advice. Pair WF 5x/22 mm Eyepieces — Wide-field 5× oculars by Euromex A Pair WF 5x/22 mm Eyepieces offering a broad field of view for general microscopy applications in teaching, inspection and routine laboratory work Wide-field WF design for expanded view 5× magnification for low-power overview 22 mm field number for comfortable observation Faster sample overview with reliable low-power optics The Pair WF 5x/22 mm eyepieces are designed to speed up initial inspection and sample scanning. With 5× magnification, these oculars provide a clear, low-power view that reduces the number of objective changes required during routine checks. The combination of a wide-field optical design and a 22 mm field number increases the visible area, enabling quicker identification of regions of interest. For workshops and teaching laboratories where throughput matters, this results in fewer interruptions and more efficient workflows without compromising the clarity needed for coarse evaluation. Comfortable observation that reduces fatigue during extended use Wide apparent fields help maintain natural eye alignment and reduce the need for frequent refocusing. The wide-field characteristic of these eyepieces delivers an ergonomically improved viewing experience, which can significantly lower eye strain during longer sessions. Supplied as a pair, they are intended for binocular viewing and thus support a comfortable, stereoscopic impression in applicable instruments. This ergonomic benefit is particularly valuable in instructional settings and quality-control stations where operators spend prolonged periods at the instrument. Clear specification and practical procurement for workshops Specification is deliberately straightforward to aid purchasing decisions: 5× magnification and a 22 mm field number are the key optical parameters to consider when matching oculars to existing equipment. The field number indicates the diameter of the usable image circle seen through the eyepiece; a larger value means more image area is visible without moving the specimen. For ordering and identification, the item is listed under SKU BE.6005 and carries the Euromex name for recognition in B2B procurement processes. If the supplied data does not answer all technical questions, additional details can be requested from Metav Werkzeuge for clarification. For tailored advice on integrating Euromex wide-field oculars into laboratory or teaching setups, contact Metav Werkzeuge in Emmerich — consultants can confirm fitment and availability of the Pair WF 5x/22 mm eyepieces (BE.6005) via email or phone Technical Data SKU: BE.6005 Description: Pair WF 5x/22 mm eyepieces Brand: Euromex Product type: Eyepiece Core specifications Magnification: 5× Field number: 22 mm Eyepiece type: WF (wide-field) Features Supplied as a pair Wide-field design Intended for general microscopy applications FAQ What does the field number 22 mm mean for the viewing area? The field number describes the diameter of the visible image circle; with a 22 mm field number, the Euromex eyepieces provide a noticeably larger visible area compared with standard narrow-field oculars. Are these eyepieces suitable for binocular observation? Yes, the item is supplied as a pair and is intended for binocular use; the Pair WF 5x/22 mm eyepieces support comfortable stereoscopic viewing where the microscope permits. How does 5× magnification affect inspection work? A 5× magnification level is ideal for low-power overview and rapid scanning, enabling faster identification of critical areas before switching to higher-power objectives. Can these eyepieces improve operator comfort during long sessions? The wide apparent field of the WF design reduces frequent refocusing and supports more natural eye positioning, which helps lessen eye strain during extended use. What is the manufacturer and how is the product identified for ordering? The eyepiece pair is manufactured by Euromex and is listed under SKU BE.6005 for procurement and inventory control. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
22mm Widefield Eyepiece HWF 10x with Reticle, 22mm Field Number - Euromex
Take advantage of widefield optics and a precise reticle to speed up inspection and alignment tasks on inverted microscopes; the result is reliable imaging with measurable guidance. Order the eyepiece through Metav Werkzeuge or consult their advisors for integration advice. Widefield Eyepiece HWF 10x/22 mm with reticle – Eyepiece for Oxion Inverso (Euromex) The Widefield Eyepiece HWF 10x/22 mm with reticle is an eyepiece optimised for inverted Oxion Inverso microscopes, delivering a large apparent field for inspection and simple reticle-based measurement. Widefield 22 mm field number 10x magnification for clear detail Integrated reticle for alignment and measurement Compatible with Oxion Inverso series Improved inspection speed with a larger visual field Operators benefit from a 22 mm field number, which increases the visible area and reduces the need for stage movement during routine checks. The HWF optical design provides an expanded apparent field while maintaining edge-to-edge sharpness, so inspectors and technicians can compare features across a wider view. This reduces handling time per sample and supports faster visual throughput without compromising image quality. Built-in reticle for straightforward alignment and quick measurements An integrated reticle simplifies repeatable alignment tasks and provides a visual reference for approximate sizing directly in the eyepiece. When paired with calibrated objective lenses, the reticle supports rapid comparative measurements and positioning checks without immediately requiring digital imaging. This practical function is especially helpful in workshop and laboratory environments where quick decisions are required and where dedicated metrology instruments are not available for every check. Optical quality tailored for inverted microscopes and routine use Designed for compatibility with the Oxion Inverso series, the eyepiece pairs optical performance with day-to-day robustness. The 10x magnification offers a balance between overview and detail work, making it suitable for inspection, assembly checks and educational demonstrations. The eyepiece’s mechanical dimensions and ocular tube fit comply with common inverted microscope standards, enabling easy swapping and consistent user ergonomics. Practical benefits for the workshop and lab environment The configuration supports a pragmatic workflow: wider field observation, visual measurement via the reticle and a standard magnification that complements a range of objectives. This combination reduces the frequency of instrument swaps and lowers the threshold for precise visual assessment in production and maintenance contexts. The result is improved process stability and better utilisation of existing microscopy assets. For precise imaging and efficient inspection on Oxion Inverso microscopes, request the Euromex widefield eyepiece via Metav Werkzeuge or contact their technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 to confirm fit and delivery. Technical data Article number: OX.6110 Product type: Eyepiece Brand: Euromex Series: Oxion Inverso Eyepiece type: HWF Magnification: 10x Field number: 22 mm Core specifications 10x magnification 22 mm field number SKU: OX.6110 Features & compatibility Integrated reticle Widefield optics Designed for Oxion Inverso inverted microscopes Eyepiece (ocular) FAQ What is the apparent field advantage of this eyepiece? The widefield design provides a 22 mm field number, giving a larger apparent field than standard eyepieces and enabling quicker visual inspection of larger areas without stage repositioning; this is a key feature of the Euromex eyepiece. Can the reticle be used for accurate measurements? The integrated reticle offers a reliable visual reference for alignment and comparative sizing; for traceable linear measurements, calibration against a stage micrometer and the objective lens used is recommended when using the eyepiece. Is this eyepiece compatible with other inverted microscope models? The eyepiece is specified for the Oxion Inverso series; mechanical compatibility with other inverted microscopes depends on ocular tube diameter and mounting standards, so verification against the microscope’s ocular specifications is advised. How does the 10x magnification support routine tasks? A 10x eyepiece balances overview and detail, making it suitable for general inspection, component checks and educational demonstrations where clear detail and reasonable field of view are required. Does the eyepiece require special cleaning or handling? Standard optical-care procedures apply: use a soft brush or air blower to remove dust, then clean lenses with lens tissue and approved solution; avoid abrasive materials and excessive force on the reticle area. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
22mm Widefield Eyepiece HWF 10x, 10x Magnification - Euromex
Ideal for inspection tasks requiring a broader view, the combination of HWF wide-field design, 10x magnification and a 22 mm field number speeds up sample assessment and reduces the need for frequent repositioning. Order the eyepiece through Metav Werkzeuge or contact their consultants for application guidance and supply options. Euromex HWF wide-field eyepiece 10x / 22 mm for Oxion Inverso microscopes The HWF wide-field eyepiece for Oxion Inverso provides a noticeably larger apparent field for routine laboratory and industrial inspection, optimised for inverted microscope workflows. HWF wide-field eyepiece design 10x magnification for reliable detail 22 mm field number for expanded view Compatible with Oxion Inverso microscopes Faster, more efficient inspection with an expanded field of view The wide-field optical design increases the usable viewing area, expressed by the 22 mm field number, which translates into a wider apparent field under the lens. A larger field number means fewer manual stage movements during examinations and quicker overviews of samples. For routine inspection, quality control and repetitive checks, this reduction in repositioning time yields tangible productivity gains while maintaining clear visual access to the specimen. Clear detail at a practical magnification level With a stable 10x magnification, the eyepiece balances resolution and context: fine structures remain discernible while surrounding features stay in view. The magnification level is especially suitable for common tasks such as particle inspection, cell culture observation and component alignment in production environments. The optical configuration preserves image sharpness across the field, so detail-focused work and broader inspection can be performed without frequent objective changes. Seamless compatibility with inverted systems and straightforward fitting Designed for the Oxion Inverso model series, the eyepiece ensures mechanical and optical compatibility with inverted microscopes from the same family. The wide-field ocular integrates with the instrument’s tube optics, preserving parfocality and centralising the image plane for consistent focus across different objectives. The eyepiece is intended as a direct replacement or upgrade option for existing Oxion Inverso setups, supporting standard laboratory workflows without extensive reconfiguration. Practical advantages for laboratory and production settings Beyond optical performance, the eyepiece supports efficient routines through an uncomplicated specification: a recognised HWF format, established magnification and a clear field number make equipment selection and documentation straightforward. For purchasing and inventory purposes, the straightforward specification reduces ambiguity in tool lists and ensures the correct ocular is specified for inverted microscope stations. Contact Metav Werkzeuge for tailored advice on Euromex eyepiece compatibility, available supply options and application-specific recommendations; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: OX.6010 Label: Weitfeld Okular HWF 10x/22 mm für Oxion Inverso inverted Mikroskope Product type: Eyepiece Eyepiece type: HWF Model series: Oxion Inverso Manufacturer: Euromex Facts Magnification: 10x Field number: 22 mm Special features Wide-field design (HWF) Compatible with Oxion Inverso inverted microscopes FAQ What is the main advantage of the wide-field eyepiece? The wide-field design increases the apparent viewing area; the Euromex HWF eyepiece with a 22 mm field number allows broader sample overview without changing the stage position as often. Which magnification does this eyepiece provide and for which tasks is it suited? The eyepiece offers 10x magnification, a practical level for routine inspection, alignment tasks and general laboratory observations where both context and detail are required. Is the eyepiece compatible with other microscope series? Compatibility is specified for the Oxion Inverso model series; mechanical and optical matching is designed for that family, while use with other systems depends on tube diameter and optical interface. How does the field number affect daily workflow? A larger field number reduces the need for repeated stage adjustments when scanning samples; in production and QC, this leads to faster inspection cycles and fewer interruptions. Can this eyepiece replace existing oculars on an Oxion Inverso? Yes, the eyepiece is suitable as a replacement or as an upgrade for Oxion Inverso inverted microscopes, maintaining parfocal relationships with standard objectives. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
23.2mm C-Mount Adapter 0.37x Fixed Focal Length Short Barrel, For 1/3" Camera - Euromex
Take advantage of the combination of precise optical reduction, robust mechanical alignment and a compact footprint for straightforward camera integration in microscopy or inspection setups. Order the adapter directly via Metav Werkzeuge or consult our specialists for compatibility guidance. C‑Mount Adapter DC.1353 — 0.37× fixed‑focus lens, short form factor (Euromex) The C‑Mount Adapter DC.1353 is a compact reduction adapter designed to couple standard 23.2 mm microscope tubes to 1/3‑inch cameras, offering a fixed focal length for stable imaging in tight setups. *0.37× optical reduction for enlarged field of view *Fixed focal length, compact short housing *Designed for 23.2 mm tubes and 1/3″ cameras *Euromex quality construction, robust alignment Fit more image into the sensor without changing objectives The onboard 0.37× optical reduction reduces the effective magnification delivered to a camera, which increases the field of view on a 1/3‑inch sensor while preserving the optical characteristics of the objective. This makes the adapter particularly useful for documentation, routine inspection and teaching applications where a larger scene must be captured with existing microscope objectives. The design simplifies image scaling: with the reduction lens in place, a standard tube microscope can be matched to a small‑format camera without reversing the optical train or adding complex relay systems. Stable optics and compact mechanics for reliable setups A fixed focal length design removes the need for additional adjustment and minimises variables that can affect focus and image repeatability. The short form factor reduces back focal distance and eases mechanical integration into confined trinocular heads or camera ports, lowering the risk of alignment shifts during handling. Built for consistent alignment, the adapter supports repeatable results in serial inspections or comparative imaging, where mechanical stability and time‑saving installation are priorities. Practical compatibility and integration guidance for demanding workflows Specified for standard 23.2 mm tubes and 1/3‑inch cameras, the reduction adapter is tailored for common microscope and camera pairings, enabling fast integration into existing instrument fleets. The product from Euromex is intended as an optical coupling solution rather than a variable zoom; its simplicity benefits operators who require predictable image scale and minimal setup time. For specialised sensor sizes or bespoke optical configurations, consultation with Metav Werkzeuge can help confirm fit and advise on appropriate camera and tube combinations. Contact Metav Werkzeuge for tailored advice on integrating the Euromex C‑Mount Adapter DC.1353 into production or laboratory workflows; local supply and expert consultation are available from Emmerich. Technical data Article number: DC.1353 SKU / UID: DC.1353 Product type: Adapter Manufacturer: Euromex Label: C‑Mount adapter with 0.37× lens, fixed focal length, short form factor for 23.2 mm tubes and 1/3 inch cameras Facts Optical reduction: 0.37× Compatible tube diameter: 23.2 mm Sensor size compatibility: 1/3 inch Special features Fixed focal length lens Short mechanical length for tight spaces C‑Mount connection Designed for microscope camera coupling Euromex manufacture FAQ What does the 0.37× optical reduction achieve? The 0.37× element reduces the effective magnification delivered to a 1/3‑inch camera, increasing the captured field of view; the Euromex adapter DC.1353 is therefore useful where a wider scene is needed without changing objectives. Is this adapter compatible with all trinocular tubes? The adapter is specified for standard 23.2 mm tubes and is intended for direct use with those ports; compatibility with non‑standard tubes should be verified prior to installation. Can the adapter be used with cameras larger than 1/3 inch? The DC.1353 is optimised for 1/3‑inch sensors; larger sensors may work but could show vignetting or altered field coverage, so confirmation with actual camera specifications is recommended. Does the adapter require further optical components for basic use? No additional lenses are required for coupling a 23.2 mm tube to a 1/3‑inch camera when using this reduction adapter; its fixed focal length lens provides the intended optical reduction without extra elements. What are the main benefits of the short form factor? A shorter housing reduces back focal distance and simplifies mounting in compact or crowded microscope stands, improving mechanical stability and reducing the chance of collision with other components. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
23.2mm C-Mount Adapter 0.50x Fixed Focal Length Short Barrel - Euromex
Compact imaging with a 0.50x lens, a fixed focal length and a short form factor delivers a wider field of view and consistent results for camera-based microscopy. The adapter's compatibility with standard 23.2 mm tubes and 1/2-inch cameras ensures straightforward integration in existing inspection rigs. Order the adapter directly via Metav Werkzeuge or ask our consultants if needed. C‑Mount Adapter DC.1355 — 0.50x lens, short design (Euromex) The C‑Mount Adapter DC.1355 is a compact imaging adapter with a 0.50x fixed focal lens designed for use with standard 23.2 mm tubes and 1/2‑inch camera sensors. Compact 0.50x optical reduction Fixed focal length for stable imaging Designed for 23.2 mm standard tubes Short form factor for tight setups Wider field and consistent image reproduction The 0.50x lens reduces the effective magnification of the optical train, producing a noticeably wider field of view while preserving image sharpness across the sensor. This behaviour makes the adapter especially useful when larger inspection areas are required without changing objectives. With a fixed focal length, the optical path remains stable and reproducible—advantageous for repetitive quality checks and automated image capture routines where constant geometry is essential. Seamless integration into existing optical systems Engineered for straightforward mechanical and optical compatibility, the accessory matches standard 23.2 mm tubes and mounts to C‑mount camera interfaces intended for 1/2‑inch cameras. The short form factor simplifies installation in compact or space-limited setups, enabling integration with trinocular microscopes, inspection towers and bespoke imaging rigs. The design reduces the need for additional spacing adapters and preserves the existing optical alignment, which speeds commissioning and reduces setup complexity. Compact robustness for industrial environments Built as a dedicated adapter for imaging workflows, this device prioritises mechanical stability and repeatability. The compact construction supports secure mounting and reduces the risk of vignetting when used with standard tube lengths. For industrial microscopy and laboratory inspection tasks where system uptime matters, the short profile minimises potential collisions and simplifies handling during changeovers. The combination of optical reduction and a concise mechanical footprint supports both bench-top microscopes and production-line camera stations. For reliable integration and expert advice, contact Metav Werkzeuge to request the Euromex DC.1355 adapter and ensure compatibility with existing imaging systems Technical data Article number / SKU: DC.1355 Product type: Adapter Brand: Euromex Label: C‑Mount Adapter with 0.50x lens, fixed focal length, short design, for standard 23.2 mm tubes and 1/2 inch camera UID: DC.1355 Core specifications Magnification factor: 0.50x Compatible tube diameter: 23.2 mm Camera sensor format: 1/2‑inch Special features Fixed focal length Short form factor C‑mount interface Compatibility with standard 23.2 mm tubes Suited for 1/2‑inch cameras Euromex brand FAQ Is this adapter suitable for standard trinocular microscopes with a 23.2 mm observation tube? Yes. The C‑Mount Adapter DC.1355 is designed specifically for standard 23.2 mm tubes and will integrate with microscopes using that tube diameter. How does the 0.50x lens affect the captured image? The 0.50x lens halves the overall magnification compared with a 1x relay, increasing the field of view while maintaining image quality when used with compatible optics and a 1/2‑inch camera. Can this adapter be used with any C‑mount camera? The adapter is made for C‑mount connections and 1/2‑inch camera formats; compatibility with specific camera models should be confirmed, but the mechanical interface conforms to the C‑mount standard. Does the fixed focal length allow for focus adjustment? The fixed focal length of the DC.1355 means the adapter does not provide variable focal adjustment; focusing is performed via the microscope objective or the camera's adjustable lens where applicable. Which inspection tasks suit this adapter best? The adapter is ideal for applications requiring a wider field of view from existing optical setups—such as PCB inspection, materials analysis and general laboratory imaging—where consistent, repeatable framing is required. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
23.2mm C-Mount Adapter 0.75x Fixed Focal Length Short Housing, 2/3" Camera Compatibility - Euromex
The compact 0.75× reduction lens and short fixed‑focal form deliver a wider field of view and straightforward optical coupling for 23.2 mm tube systems and 2/3‑inch cameras; take advantage of reliable Euromex optical quality and order directly via Metav Werkzeuge or consult our technical team for system matching. C‑Mount adapter with 0.75× lens — short fixed‑focal optical adapter (Euromex) The C‑Mount adapter with 0.75× lens is a compact optical coupling solution for microscope imaging and inspection systems, offering a short fixed focal length for standard 23.2 mm tubes and 2/3‑inch cameras. 0.75× reduction lens for wider field of view Short fixed‑focal design for compact setups Compatible with 23.2 mm tube and 2/3" cameras Euromex optical quality for consistent imaging Optimised field of view for faster inspection cycles The built‑in 0.75× lens reduces the image scale to increase the observable area on a 2/3‑inch sensor, which lowers the need for stage movement and accelerates routine inspections. By providing a predictable reduction factor, the adapter supports repeatable imaging across different devices; the field of view expands without altering the objective optics, enabling more efficient capture of assemblies, PCBs or biological specimens. The optical behaviour is deterministic, so calibration and subsequent measurements remain consistent. Space‑saving construction to fit tight optical stacks A short construction minimises the clearance required between the objective tube and the camera, aiding integration into compact microscopes and imaging rigs. The adapter’s compact profile reduces mechanical interference in stacked optical trains and keeps the optical axis stable, which is particularly beneficial when working in constrained enclosures or with motorised stages. The reduced length simplifies assembly and can prevent vignetting that sometimes occurs with longer extension tubes. Robust mechanical and optical compatibility for reliable mounting Designed for standard 23.2 mm tube interfaces and 2/3‑inch cameras, the adapter provides secure mechanical coupling and precise alignment. The fixed optical element eliminates the need for adjustable optics within the adapter, reducing play and potential misalignment during frequent camera changes. This mechanical reliability translates into less downtime for re‑calibration and greater confidence in repeat measurements when the adapter is used in production, quality control or research environments. Fixed focal length for predictable imaging performance A fixed focal length lens simplifies system setup: focus adjustments are handled at the objective or camera plane while the adapter maintains a constant optical reduction. This predictability benefits workflows that demand reproducible imaging conditions, such as automated inspection or photogrammetry. Users with limited optical experience will find system commissioning faster because the adapter removes one variable from the optical chain. Trusted for routine laboratory and workshop use The optical coupling offered here suits a wide range of applications from routine microscopy to industrial inspection. The straightforward design minimises maintenance and provides consistent image quality across shifts of use. For users seeking an economical route to expand an existing imaging system, this adapter balances compactness and optical performance while leveraging established Euromex craftsmanship. Contact Metav Werkzeuge today for tailored advice or to match the Euromex C‑Mount adapter with existing microscope and camera configurations; Metav Werkzeuge provides expert consultation from Emmerich and can assist with system compatibility checks. Technical Data Article number: DC.1357 Label: C‑Mount adapter with 0.75× lens, fixed focal length, short design; for standard 23.2 mm tubes and 2/3‑inch cameras Brand: Euromex Product type: Adapter UID: DC.1357 Facts Reduction factor: 0.75× Tube diameter: 23.2 mm Camera sensor format: 2/3 inch Focal length: fixed Special features Short construction for compact assemblies Optical coupling for microscopes and imaging systems Robust mechanical mounting for 23.2 mm tubes Fixed focal‑length optical element FAQ What sensor formats does this adapter support? The adapter DC.1357 is designed for use with 2/3‑inch cameras and standard 23.2 mm tube systems, ensuring mechanical and optical compatibility with common imaging sensors. Will the 0.75× lens change the objective’s working distance? The Euromex C‑Mount adapter with 0.75× lens preserves the objective’s working distance; focus is achieved at the camera plane or objective, while the adapter provides a fixed reduction factor. Can the adapter be used with non‑standard tube diameters? DC.1357 is specified for 23.2 mm tubes; using other tube standards requires appropriate mechanical adapters to maintain secure mounting and optical alignment. How does the fixed focal length affect calibration? A fixed focal length simplifies calibration because the optical reduction remains constant; once the system is calibrated with the adapter installed, measurements remain repeatable without further optical adjustments. Is this adapter suitable for automated inspection systems? Yes, the compact short design and predictable 0.75× reduction make the adapter suitable for automated inspection where consistent imaging geometry and minimal realignment are required. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
23.2mm C-Mount Adapter 1× Fixed Focal Length Short Barrel, 1" Camera Compatible - Euromex
Short, mechanically compatible and optically consistent — this adapter combines a fixed focal length and a compact form factor to simplify camera-to-tube integration. Order the Euromex adapter directly via Metav Werkzeuge or ask the consultants for integration advice. C‑Mount adapter with 1× lens — compact adapter with fixed focal length for 23.2 mm tubes and 1-inch cameras (Euromex) C‑Mount adapter with 1× lens designed to connect standard 23.2 mm microscope tubes to 1-inch cameras, offering a short, space-saving housing and stable optical geometry for imaging and inspection setups Short form factor for compact installations Fixed focal length for repeatable imaging Compatible with 23.2 mm tubes and 1‑inch cameras Fast, reliable mechanical compatibility for straightforward integration The C‑Mount connection and the compatibility with the 23.2 mm tube standard allow rapid mechanical mating between optical tubes and camera sensors. Because the adapter has a short form factor, it reduces the required back‑focus distance in confined assemblies, which simplifies system layout on compact benches or inside inspection enclosures. The unity 1× magnification ensures the camera sensor records the intended field of view without additional relay optics, so calibration routines remain straightforward and repeatable. Predictable optical behaviour that aids measurement and inspection A fixed focal length lens delivers a consistent image scale and depth of field across repeated captures, which benefits tasks that rely on reproducible imaging such as visual inspection, documentation and basic metrology. The absence of zoom elements reduces variables during alignment, meaning fewer adjustments are required after initial setup. For users less familiar with optical terms: fixed focal length means the lens does not change magnification, so images remain stable and easier to compare over time. Practical installation benefits for laboratory and production environments The adapter’s compact design supports close stacking with microscope heads and camera housings, making it suitable where space is limited. The C‑Mount interface is an industry standard, so mechanical compatibility with a wide range of cameras and tube systems is ensured. The simple mechanical coupling minimises the need for additional fixtures, which shortens assembly time and lowers the risk of misalignment during routine changes of cameras or objectives. Where this adapter adds value in a workflow This component is ideal for users looking to convert an optical tube to a camera input quickly while retaining a stable image geometry — common in microscopy imaging, quality control stations and laboratory documentation systems. The compact, fixed‑geometry design reduces setup complexity, helping maintain throughput in repetitive inspection tasks and ensuring consistent images for comparisons or automated image processing pipelines. Contact Metav Werkzeuge for personalised integration support and availability of the Euromex C‑Mount adapter DC.1359; phone +49 2822 7131930, email info@metav-werkzeuge.com Technical Data Article number: DC.1359 Manufacturer: Euromex Product type: Adapter Description: C‑Mount adapter with 1× lens, fixed focal length, short form for 23.2 mm tubes and 1‑inch camera Data Tube diameter: 23.2 mm Camera format: 1‑inch Magnification: 1× Special features Fixed focal length lens Short housing for compact setups Standard C‑Mount interface Designed for direct tube‑to‑camera coupling FAQ What cameras is this adapter compatible with? The adapter is compatible with 1‑inch cameras and mates to standard C‑Mount cameras, enabling direct connection to common sensor formats used in laboratory and industrial imaging. Can the adapter be used with standard microscope tubes? Yes — the adapter is intended for use with 23.2 mm tubes, providing a straightforward mechanical interface between microscope tube systems and camera sensors. Does the lens offer variable magnification? The built‑in lens provides 1× (unity) magnification with a fixed focal length, so magnification is constant and does not require adjustment during normal operation. Will this adapter affect calibration or image scale? Using the fixed focal length and the short form factor gives a repeatable image scale, which simplifies calibration and supports consistent measurements when the same configuration is used. Which SKU should be ordered for this adapter? Order the product under SKU DC.1359, marketed by Euromex as a compact C‑Mount adapter with a 1× lens. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
23.2mm C-Mount Adapter with 0.45x Objective for 1/2" Camera - Euromex
Combining a 0.45× reduction lens with a true C‑mount interface, this adapter increases the field of view for 1/2‑inch camera sensors while maintaining optical alignment for Ø 23.2 mm eyetubes — a practical upgrade for existing stereo and inspection microscopes. Order the adapter directly via Metav Werkzeuge or ask our consultants if needed. C‑Mount Adapter with 0.45× Objective for Ø 23.2 mm Tubes — Euromex Adapter A C‑mount adapter with a 0.45× objective that adapts standard Ø 23.2 mm microscope tubes for 1/2‑inch camera sensors in laboratory and inspection imaging. C‑mount interface for 1/2‑inch cameras 0.45× reduction lens for wider field Fits Ø 23.2 mm microscope tubes Compact optical adapter for laboratory use Capture a wider field without changing the microscope The 0.45× reduction implemented in this optical adapter reduces the effective magnification, which results in a noticeably larger field of view on a connected camera. For digital documentation and inspection workflows, this means fewer stitched images and faster overview shots, reducing cycle times in routine imaging tasks. The measured reduction factor preserves the optical path so that image framing and focus adjustments remain consistent with the original eyepiece setup. Simple integration with common imaging setups Designed for microscopes with a standard Ø 23.2 mm eyetube, the unit provides a direct mechanical connection to C‑mount cameras commonly used in laboratory and quality‑control environments. The adapter streamlines integration with 1/2‑inch sensor cameras, enabling reliable image capture without the need for extensive mechanical modifications. This compatibility supports rapid deployment in inspection benches or teaching labs where existing optics should be retained. Maintain image quality while expanding utility Although the adapter reduces magnification, it is intended to preserve alignment and optical performance so that sensor utilisation is optimised for 1/2‑inch formats. The resulting images offer a practical balance between resolution and coverage, making the solution suitable for documentation, measurement overview shots and routine inspection tasks. The optical adaptation assists in efficient data capture and helps reduce the number of image acquisitions required for full‑field analysis. Practical benefits for workshops and labs By adapting existing microscopes with a compact imaging interface, laboratories and workshops gain a cost‑effective route to digital imaging. The optical adapter supports quicker inspection workflows, reduces handling time and helps standardise imaging across different benches. For those requiring further clarification on compatibility or installation, detailed technical advice is available to ensure correct camera selection and mounting. For tailored advice on integrating this Euromex C‑mount adapter into an existing imaging setup, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application specifics and ordering options Technical data SKU: DC.1324 Label: C‑Mount Adapter with 0.45× objective for standard Ø 23.2 mm tubes and 1/2 inch camera Product type: Adapter Manufacturer: Euromex Facts Reduction factor: 0.45× Tube diameter: Ø 23.2 mm Camera sensor compatibility: 1/2‑inch Special features C‑mount thread for camera attachment Designed for microscope eyetube integration Intended for laboratory and inspection imaging FAQ What cameras are compatible with this adapter? The adapter is designed for C‑mount cameras with a 1/2‑inch sensor; matching the camera sensor size ensures the expected field of view when used with Ø 23.2 mm eyetubes. Will the adapter change image magnification and framing? Yes — the 0.45× reduction reduces effective magnification, increasing the field of view so fewer images are needed for broad area documentation. Can the adapter be used on any microscope with a 23.2 mm tube? It is intended for microscopes featuring a standard Ø 23.2 mm eyetube; mechanical compatibility is required for secure mounting and correct optical alignment. Is image resolution compromised by using the adapter? The adapter reduces magnification but is intended to preserve optical alignment so that the sensor is used efficiently; resolution-per‑pixel depends on the camera sensor and objective combination. What is the product SKU for ordering and reference? The product is listed under SKU DC.1324, referenced as a C‑mount adapter with a 0.45× objective for Ø 23.2 mm tubes. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
23.2mm Eyepiece Tube for Oxion Upright and Inverso Inverted Microscopes, Revision 2 - Euromex
Take advantage of the combination of a standard 23.2 mm optical interface and secure stand mounting to standardise assemblies and reduce adapter inventory; order the component directly via Metav Werkzeuge or consult our advisors for system matching. Standard 23.2 mm Tube AE.5120-2 – Stand/Holder for Oxion upright (rev. 2) & Oxion Inverso by Euromex The Standard 23.2 mm Tube AE.5120-2 is a precision adapter tube and mounting component for Oxion upright (revision 2) and Oxion Inverso inverted microscopes, designed to ensure a stable optical connection and consistent imaging results across compatible instruments. Standard 23.2 mm diameter interface Compatible with Oxion upright (rev. 2) and Inverso Secure stand/holder mounting Precision alignment for optical components Consistent optical performance through a standard interface The main advantage of a 23.2 mm interface is interoperability: the adapter tube provides a standardised connection between eyepieces, camera adapters and the microscope body, which simplifies instrument configuration and reduces the need for bespoke parts. For laboratories and teaching environments, this means fewer adapters in stock and faster setup times. The component is intended as a reliable mechanical link that maintains the optical axis and supports repeatable imaging, contributing to consistent image quality and reduced calibration effort. Quick integration into Oxion instrument lines Designed specifically for the Oxion family, the tube integrates with both Oxion upright (rev. 2) assemblies and the Oxion Inverso series, enabling straightforward retrofits or replacements. The product functions as a compact stand/holder that secures optical elements in position, which reduces play and drift during prolonged examinations. Installation requires standard mounting steps typical for optical accessories, and the mechanical fit supports secure locking to avoid unintended movement during sample observation or photomicrography. Reduced downtime and simplified workshop logistics By adopting a component built to the 23.2 mm optical convention, workshops and service departments benefit from lower logistics complexity: common interfaces mean fewer unique spare parts and quicker turnaround for maintenance. The robust mounting character of this holder mitigates misalignment risks during handling, so microscopy setups return to operational condition faster after component changes. In contexts where reproducibility matters, the standard tube helps maintain a stable optical path and supports dependable measurement or documentation workflows. Contact Metav Werkzeuge for expert matching and supply of the Euromex Standard 23.2 mm Tube AE.5120-2 to ensure correct integration with Oxion microscopes and immediate availability from Emmerich stock Technical Data Article number: AE.5120-2 SKU: AE.5120-2 Label: Standard 23.2 mm Tube for Oxion upright (revision 2) and Oxion Inverso inverted microscopes Core specifications Interface diameter: 23.2 mm Type: Stand / holder Compatibility: Oxion upright (rev. 2), Oxion Inverso Features Manufacturer: Euromex Model series: Oxion Inverso Product category: Stand / holder Intended use: Optical mounting and alignment FAQ Is this tube compatible with both Oxion upright and Oxion Inverso microscopes? The Standard 23.2 mm Tube AE.5120-2 is specified for use with Oxion upright (revision 2) and Oxion Inverso, providing the standard 23.2 mm interface required for compatible eyepieces and adapters. Can the adapter support camera attachments and eyepieces interchangeably? Yes, the 23.2 mm interface of the AE.5120-2 supports standard eyepiece and camera adapters that conform to the same optical diameter, enabling interchangeable use without additional custom parts. Will the tube help reduce the number of spare parts needed in a workshop? Employing the standard 23.2 mm interface reduces the need for multiple bespoke adapters; the AE.5120-2 simplifies inventory by enabling a common connection across compatible Oxion accessories. Does the product include any mounting hardware or instructions? Mounting follows standard optical accessory procedures for Oxion stands; specific hardware inclusion is not detailed in the product data for AE.5120-2, so consult technical documentation or Metav Werkzeuge for assembly guidance. Which manufacturer produces this tube and where is it based? The tube is produced by Euromex and supplied as a component for the Oxion series; for sourcing and technical enquiries reference SKU AE.5120-2 and the Euromex product line Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands; info@euromex.com
23.2mm Fluorescence Attachment with GFP-B and GFP-L Filter Sets, 23.2mm Photo Tube - Euromex
Benefit from precise GFP imaging and straightforward camera coupling thanks to the included GFP‑B and GFP‑L filter sets and the 23.2 mm phototube, which together enhance contrast and simplify documentation workflows; order the Euromex DZ.9050 directly via Metav Werkzeuge or ask our consultants if needed. Euromex Fluorescence Attachment DZ.9050 — GFP‑B & GFP‑L filter sets, 23.2 mm phototube (accessory) A Fluorescence attachment with GFP‑B and GFP‑L filter sets and a 23.2‑mm phototube designed as an accessory for microscopes to enable GFP fluorescence observation and camera coupling in routine laboratory and inspection tasks. GFP‑B and GFP‑L filter sets for GFP fluorescence 23.2 mm phototube for camera connection Designed as an accessory by Euromex Simple integration with standard eyepiece tubes Enhanced fluorescence contrast for routine inspection The attachment supplies two dedicated filter sets—GFP‑B and GFP‑L—that are matched to common GFP emission characteristics, improving signal separation from background light. This results in clearer fluorescent signals and more reliable visual assessment when using standard binocular or trinocular microscopes. The design focuses on stable optical alignment to preserve contrast and to reduce the need for repeated adjustments, making the component suitable for repetitive inspection tasks and documentation. Direct camera coupling with a standard phototube A built‑in 23.2 mm phototube enables direct coupling of cameras or eyepiece adapters without additional custom mounts. The standard diameter supports a wide range of industrial and scientific camera adapters, allowing straightforward digitisation of fluorescence images. For users less familiar with camera interfaces: the phototube provides a secure mechanical interface and preserves the optical axis, ensuring the captured images are representative of what is seen through the microscope optics. Integration benefits and practical considerations As an accessory component from Euromex, the unit is intended for rapid integration into existing microscope setups and complements routine workflows where fluorescence contrast and simple documentation are required. The supplied filter sets reduce trial‑and‑error when selecting spectral isolation for GFP, and the phototube mitigates the need for complex mechanical adapters. For mixed‑use labs, this attachment can shorten set‑up times and improve repeatability of image capture during inspection or teaching demonstrations. Contact Metav Werkzeuge today to discuss the Euromex DZ.9050 fluorescence attachment and arrange supply or technical advice from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: DZ.9050 Product: Fluorescence attachment with GFP‑B and GFP‑L filter sets and a 23.2 mm phototube Category: Accessory / Component Manufacturer: Euromex Cross‑selling SKUs: AE.1385;DZ.1100;DZ.1105;DZ.1600;DZ.1605;DZ.1800;DZ.1805;DZ.9060;DZ.9061 UID: DZ.9050 Facts No numerical performance data provided Special features GFP‑B filter set included GFP‑L filter set included 23.2 mm phototube for camera connection Intended as a microscope accessory Manufacturer brand: Euromex FAQ What is the primary purpose of this attachment? The attachment is intended to enable GFP fluorescence observation and straightforward camera coupling; the Euromex DZ.9050 supplies matched GFP‑B and GFP‑L filter sets and a 23.2 mm phototube to support these tasks. Which microscopes are compatible with the phototube? Compatibility is based on the standard 23.2 mm eyepiece diameter; the Euromex accessory fits microscopes that accept this phototube size or that can accept a 23.2 mm camera adapter. Are both GFP filter types necessary? The included GFP‑B and GFP‑L sets offer options for different GFP emission and lighting conditions, providing flexibility for optimising contrast without changing the microscope illumination system. Can the phototube be used with cameras from other manufacturers? Yes, the 23.2 mm phototube is a standard interface; most camera adapters for microscopes support this diameter, permitting use with a wide range of camera models. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
23.2mm Photo Port Standard, Mounting Accessory - Euromex
Take advantage of the 23.2 mm standard interface and compact holder design to integrate a camera quickly and reliably into existing microscope setups; benefit from straightforward compatibility and secure mounting and order this accessory directly via Metav Werkzeuge or contact our consultants for specification advice. Standard 23.2 mm Photo Port — Stand / Holder by Euromex, 23.2 mm interface The Standard 23.2 mm Photo Port is a compact stand-style photo adapter designed to provide a standardised interface for camera attachment to microscopes and optical heads 23.2 mm standard interface Compact stand / holder format Designed for microscope camera mounting Stable alignment for repeatable imaging Simple compatibility that speeds set-up The clearly defined 23.2 mm interface ensures immediate compatibility with widely used camera tubes and adapters, reducing downtime when integrating digital imaging equipment. With a focus on a standardised connection, this photo port simplifies the process of coupling C-mount adapters or camera tubes to an optical head. The result is a pragmatic solution that supports faster configuration and fewer accessory purchases while maintaining a repeatable mechanical interface for imaging workflows. Stable mounting for consistent image quality A stand-style holder provides stable mounting and helps to preserve optical alignment between camera and thread or tube, which is essential for consistent results in photography and measurement tasks. By maintaining the correct optical axis, this accessory minimises the need for repeated focusing or repositioning. The mechanical reliability of the holder supports routine imaging tasks, contributing to predictable output and efficient throughput in laboratory or workshop environments. Seamless workshop integration and supply assurance The compact design of this photo port supports flexible placement within existing instrument setups and encourages modular system builds. Sourcing via Metav Werkzeuge offers the advantage of consolidated procurement and dependable supply from Emmerich, backed by a broad portfolio of workshop equipment. For customers seeking standardised imaging interfaces, this adapter delivers a practical balance of compatibility and mechanical simplicity that integrates smoothly into both educational and industrial microscopy workflows. For dependable microscope imaging accessories, contact Metav Werkzeuge to discuss the Euromex Standard 23.2 mm photo port and ensure prompt supply from our Emmerich facility Technical data Article number: BS.5120 Label: Standard 23.2 mm Photo Port Manufacturer: Euromex Product type: Stand / Holder UID: BS.5120 Measurements & interface Interface diameter: 23.2 mm Materials & compatibility Intended function: Photo port for camera mounting Application: Integration with microscopes featuring a 23.2 mm photo tube FAQ What does the 23.2 mm size refer to? The 23.2 mm dimension denotes the standard interface diameter used by the photo port for camera tube connections, allowing the Euromex photo port to mate with common microscope camera tubes. Can this photo port be used with any microscope? Compatibility depends on the microscope having a 23.2 mm photo tube or an adaptor; the Euromex photo port is intended for systems that accept the 23.2 mm standard interface. Is the holder suitable for repeatable imaging tasks? Yes, the stand/holder format is designed to provide stable mounting and preserve optical alignment for consistent imaging results. Where can technical questions about integration be directed? Technical enquiries regarding the photo port and system integration can be referred to Metav Werkzeuge, which supplies the Euromex accessory and can advise on compatibility and sourcing. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
23.2mm Phototube Attachment For DZ-Series, 23.2mm Tube - Euromex
Take advantage of a compact optical accessory that ensures reliable camera coupling and consistent image alignment for DZ microscopes; its 23.2 mm tube diameter matches standard phototube interfaces and streamlines digital imaging workflows. Order the accessory directly via Metav Werkzeuge or consult our technical advisors for compatibility advice. Phototube adapter for DZ-series with 23.2 mm tube (Euromex) A phototube adapter for DZ-series with 23.2 mm tube for secure mechanical coupling of cameras and imaging modules to DZ-series microscopes Phototube adapter for DZ-series Standard 23.2 mm tube diameter Simple mechanical coupling Compact, lightweight design Faster integration into existing inspection setups The phototube adapter for DZ-series with 23.2 mm tube enables quick and reproducible attachment of imaging devices to compatible microscope heads. Fitting the DZ-series phototube, the adapter reduces setup time by removing the need for custom fixtures, which directly supports higher throughput in routine inspections. The mechanical interface preserves the optical axis and helps maintain consistent focus, contributing to reliable imaging results with minimal calibration. Stable optical alignment for precise image capture A defined 23.2 mm tube interface ensures consistent optical alignment between the microscope and the imaging device. By standardising the connection, the adapter reduces the risk of vignetting and off-axis artefacts that can affect measurement and documentation tasks. The result is dependable image capture suitable for documentation, quality control and basic image analysis without complex optical adjustments, supporting predictable outcomes in daily workshop use. Practical benefits for workshop workflows and inventory As an accessory component, the adapter is compact and straightforward to store, reducing inventory complexity. Its compatibility with standard phototube dimensions makes it a flexible choice for mixed fleets of microscopes and digital cameras. Combined with a trusted distributor, the solution helps simplify procurement and keeps bench operations running smoothly. Metav’s role as a precision partner underlines the availability of tested, cost-effective imaging accessories for industry and trade. For a dependable imaging upgrade with Euromex phototube accessories, contact Metav Werkzeuge GmbH in Emmerich for specification checks and fast supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: DZ.9005 Label: Phototube adapter for DZ-series with a 23.2 mm tube Brand: Euromex Product type: Accessory / Component Model series: DZ-series Measurements Tube diameter: 23.2 mm Features Compatible with: DZ-series Intended use: Camera coupling / phototube attachment UID: DZ.9005 FAQ Is this adapter compatible with all DZ-series microscope heads? The adapter is designed for use with DZ-series microscope phototubes and aligns to the standard 23.2 mm tube interface for the DZ-series accessory connection. Which cameras can be used with this adapter? Cameras and imaging modules that mate to a 23.2 mm phototube interface can be coupled using the adapter; confirm mechanical fit and sensor positioning before use with the Euromex accessory. Does installation require special tools or modifications? Installation is a mechanical coupling to the phototube; the adapter provides alignment without permanent modification to the microscope and is intended as a removable accessory. Where is this accessory manufactured? (brand and SKU) The phototube adapter is supplied by Euromex and listed under SKU DZ.9005 for the DZ-series accessory range. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
23.2mm Twin-Tube Phototube Attachment for DZ-Series, Camera Port - Euromex
Take advantage of a compact interface that brings camera integration to the DZ-series: the dual 23.2 mm tubes allow simultaneous imaging and eyepiece use, improving documentation speed and consistency. Order the phototube attachment directly via Metav Werkzeuge or consult our advisers for compatibility details. Phototube attachment for DZ-series — dual 23.2 mm tubes (Euromex accessory, DZ.9007) Phototube attachment for DZ-series: a compact accessory that provides two 23.2 mm tubes for integrating a camera alongside standard eyepieces in DZ-series microscopes. Dual 23.2 mm imaging tubes Designed for DZ-series microscopes Enables simultaneous camera and eyepiece use Compact accessory for laboratory workflows Streamline imaging and documentation with standard optics The phototube attachment brings a practical solution for laboratories and teaching environments that require routine image capture. Fitting the common 23.2 mm tube standard, the adapter allows established imaging devices and eyepieces to be used without the need for custom optical modifications. This compatibility reduces setup time and helps maintain consistent magnification and field of view when switching between visual inspection and camera-based documentation. The result is a smoother optical workflow and fewer alignment checks during day-to-day use. Designed for integration into the DZ-series optical path Engineered as an accessory for the DZ-series, the adapter matches the series’ optical interface and supports standard tube mounting. The two-tube configuration enables parallel paths for camera and eyepiece, which preserves the optical train and simplifies the transition between observation and capture. For practitioners with limited microscopy experience, the clear mechanical and optical fit reduces the learning curve when updating an existing microscope stand for digital documentation. The specification of 23.2 mm ensures broad compatibility with eyepieces and many phototube cameras. Practical advantages for labs, education and inspection Introducing a dedicated phototube adapter into a workstation enhances reproducibility in imaging tasks and speeds up reporting. In educational settings, the simultaneous viewing and imaging capability supports demonstrations and student documentation. In quality control or inspection workflows, consistent documentation lanes help create auditable image records. By focusing on functional benefits — reliable optical alignment and straightforward integration into existing setups — the accessory contributes to more efficient daily routines and fewer interruptions for reconfiguration. Confidence in sourcing and the accessory ecosystem The phototube adapter is part of a wider ecosystem of accessories for the DZ-series, enabling extensions and upgrades without replacing core equipment. Metav’s position as a precision partner underlines a practical procurement advantage: straightforward availability, a broad product range and a clear supply chain for European customers. Metav stands for the democratisation of precision, combining extensive product selection with supply reliability from Emmerich, which acts as a quality filter for the market. The pairing of a proven optical accessory with a dependable supplier network reduces procurement risk for workshop managers and procurement professionals. For imaging upgrades to your DZ-series microscope, contact Metav Werkzeuge to order the Euromex phototube attachment DZ.9007 or request tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DZ.9007 Label: Phototube attachment for the DZ-series with two 23.2-mm tubes Manufacturer: Euromex Product type: Accessory / Component Model series: DZ-series Cross-selling SKUs: DZ.1100;DZ.1105;DZ.1600;DZ.1605;DZ.1800;DZ.1805;DZ.9013 Core specifications Number of tubes: 2 Tube diameter: 23.2 mm Special features Compatible with DZ-series microscopes Enables simultaneous camera and eyepiece paths Accessory / component for optical documentation SKU: DZ.9007 FAQ Is this adapter compatible with other microscope series? The phototube attachment is specified for the DZ-series; compatibility with other stands depends on matching the 23.2 mm tube interface and mechanical fittings, so verification is recommended. Can the adapter be used for both photography and live observation at the same time? Yes, the accessory provides two 23.2 mm tubes designed to allow simultaneous imaging and eyepiece use, enabling parallel documentation and visual inspection. Which cameras fit the 23.2 mm tubes? Cameras designed for standard 23.2 mm phototube interfaces or those that use matching adapter sleeves are suitable; check the camera’s tube or adapter requirements against the phototube attachment specification. Does the product include adapters for different camera mounts? The phototube attachment supplies the dual 23.2 mm tube interface; specific camera mount adapters are typically ordered separately—refer to the DZ-series accessory range for matching items. What is the SKU for ordering and cross-referencing? Order or reference the accessory using SKU DZ.9007; related accessories can be found under the listed cross-selling SKUs such as DZ.1100 and DZ.9013. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
23.2mm Universal SLR Adapter with Built-In 2× Lens, T2 Adapter Required - Euromex
Take advantage of a compact photographic interface that combines an integrated 2× lens with direct mounting to a 23.2 mm standard tube, ensuring consistent magnification and simplified optical setup. Order the adapter directly via Metav Werkzeuge or consult their specialists for questions about fitment and compatible accessories. AE.5130 — Universal SLR camera adapter with built-in 2× lens (23.2 mm tube) by Euromex The AE.5130 is a universal SLR camera adapter with an integrated 2× magnification lens for standard 23.2 mm microscope tubes; a T2 adapter is required for camera attachment. Universal SLR adapter for 23.2 mm tube Integrated 2× magnification lens Requires T2 adapter for camera connection Compatible with AE.5025 and AE.5040 accessories Simplified optical path for predictable imaging The adapter places an integrated 2× lens directly in the imaging path, producing a defined enlargement step that simplifies exposure planning and focus adjustment for photomicrography. By mating to a 23.2 mm standard tube, the interface preserves the optical geometry that eyepiece tubes and trinocular heads expect, which helps to reduce vignetting and uneven illumination compared with ad hoc relay arrangements. The clear magnification factor supports reproducible documentation across sessions, and the direct SLR interface means the camera sensor receives an image optimised for routine recording without the need to assemble separate relay optics. This results in faster setup times and fewer alignment variables for laboratory or teaching workflows while maintaining high-resolution imaging suitable for reports and archives. Fast integration into existing microscope configurations Connection to camera bodies is handled via a standard T2 adapter, the common threaded interface used to attach SLR bodies to optical adapters; this approach allows straightforward interchange between camera systems when the appropriate T2 ring is used. The unit accepts the common 23.2 mm tube diameter and is compatible with accessories AE.5025 and AE.5040, enabling adaptation to trinocular heads or dedicated intermediate adapters. Because the lens is built into the adapter, mechanical alignment is minimised: once the adapter is fitted to the eyepiece tube and the T2 ring is secured to the camera, optical alignment is inherently stable. For laboratories and workshops that switch cameras or alternate between documentation setups, the adapter offers a practical, low-complexity route to consistent imaging results. Practical benefits for routine documentation and education In environments where reproducibility and time efficiency matter—such as teaching laboratories, routine inspection or basic research documentation—the adapter’s fixed magnification step and standard tube interface reduce variability and simplify image capture procedures. The design supports predictable image scale, which aids measurement planning and comparison of image series without recalculating complex optical paths for each session. Distributed as an SLR photographic interface by Euromex, the component is a pragmatic solution where dependable photomicrography is required and workflow efficiency is a priority rather than modular optical flexibility. Integration with existing microscope equipment and common camera standards makes this adapter well suited to departmental imaging duties and routine visual documentation. For procurement or technical advice on the AE.5130, contact Metav Werkzeuge in Emmerich — their specialists will advise on T2 adapters, confirm compatibility with existing microscope heads and accessories, and arrange supply directly from stock. Technical data Article number: AE.5130 Product type: SLR camera adapter Manufacturer: Euromex Key specifications Lens magnification: 2× Tube connection: 23.2 mm Features and compatibility Camera connection: T2 adapter required Compatible with: AE.5025;AE.5040 Description: Universal SLR adapter with built-in 2× lens FAQ How does the integrated 2× lens influence image magnification and planning? The built-in 2× lens delivers a defined magnification step that makes image scale predictable; with the AE.5130 this supports easier exposure and focus planning for routine photomicrography. Which tube diameter does the adapter accept? The interface is designed for the 23.2 mm standard tube, matching common eyepiece and trinocular connections used in many microscope stands. Is a T2 adapter required to attach a camera? Yes — the adapter requires a T2 adapter to connect an SLR camera body; the T2 connection is the defined method for attaching the camera to the photographic interface. Can the adapter be used with other accessories or intermediate tubes? Compatibility with accessories AE.5025 and AE.5040 is indicated, permitting connection to various intermediate tubes and trinocular setups where those items are applicable. What applications suit this type of SLR camera adapter? The adapter is well suited to documentation, teaching and routine inspection tasks where predictable magnification and straightforward integration into existing microscope setups are required. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
230mm Objective Lens 1x Working Distance 230mm - Euromex
Take advantage of precise, low-magnification observation and a generous working distance to speed up visual inspection and sample handling. The combination of true-to-scale 1x imaging and 230 mm clearance reduces repositioning and tool interference, keeping throughput steady. Order the objective or consult Metav Werkzeuge for compatibility checks and procurement. Objective 1x for BE.18xx — 230 mm working distance (Euromex) The Objective 1x for BE.18xx is a replacement optical component for microscopes, engineered to deliver low-magnification overview imaging with an extended working distance suitable for inspection and assembly tasks 1x magnification for true-to-scale imaging 230 mm working distance for tool access Compatible with BE.18xx microscope heads Clear overview imaging that speeds inspection workflows A 1x magnification objective lens provides an undistorted, life-size view that simplifies orientation, component inspection and documentation. This low-power optic is particularly effective when a broad field of view is required rather than high magnification; it reduces the need to swap lenses during routine checks and visual quality control. The result is fewer interruptions in the production flow and a consistent visual reference for repeatable inspections. The optical element supports straightforward observation and image capture while maintaining the spatial relationships of the specimen for easier measurements and comparisons. Generous working distance to accommodate tools and illumination With a 230 mm working distance, the lens allows ample space between the front of the optics and the specimen, enabling safe manipulation of parts, probing and placement of lighting without obstructing the view. This clearance is advantageous in assembly environments or when larger fixturing is in use, as it reduces the risk of collisions and makes handling more ergonomic. The extended spacing also facilitates the integration of external illumination and measurement probes, preserving the inspection workflow while keeping the optical axis stable for repeatable results. Seamless compatibility and quick replacement to reduce downtime Designed for the BE.18xx series, the optics ensure fast integration into existing microscope heads and reduce changeover time. As a dedicated replacement lens from Euromex, the component is intended for direct swap-in use, eliminating the need for adapter work or extensive recalibration for typical bench tasks. The focused compatibility helps maintain equipment availability and supports uninterrupted throughput in inspection stations. Where traceability is important, the lens can be recorded against the instrument setup as an identified optical component for quality records. Procurement support and practical guidance from Metav Werkzeuge Metav stands for the democratisation of precision, offering extensive product choice from a single European distribution hub in Emmerich. Benefit from a broad catalogue and experienced procurement support when specifying optics for microscopes: Metav Werkzeuge combines decades of metrology experience with a large stock range to keep production supplied. For clarifications about fitment, illumination needs or alternative optics, technical advisors at Metav Werkzeuge can provide targeted information and assist in selecting the correct replacement component to fit inspection requirements or workshop setups. Contact Metav Werkzeuge to confirm compatibility and arrange supply of this Euromex 1x objective for BE.18xx — technical advice and order support are available from Emmerich Technical data Article number: BE.7410 Designation: Objective 1x for BE.18xx, working distance 230 mm Product type: Objective / Lens Manufacturer: Euromex UID: BE.7410 Facts Magnification: 1x Working distance: 230 mm Special features Compatible with BE.18xx microscope series Replacement optical component for low-magnification inspection Manufacturer: Euromex FAQ Is this objective compatible with BE.18xx microscope models? Yes. The Objective 1x for BE.18xx (SKU BE.7410) is specified for use with the BE.18xx series and is intended as a direct replacement optical component. What magnification does the lens provide? The lens delivers 1x magnification, providing a life-size overview suited to inspection and assembly tasks. How much clearance does the lens offer for handling and tools? The working distance is 230 mm, offering generous space for probes, tooling and external illumination without obstructing the optical path. Can this objective be used for documentation or image capture? The low-magnification optic is appropriate for visual documentation and wide-field imaging where true-to-scale representation is required; camera integration depends on the microscope head and camera adapter in use. Who supplies and supports this Euromex objective in Europe? Supply and technical procurement support are handled through Metav Werkzeuge; advisors can confirm fitment and provide ordering assistance for SKU BE.7410. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
230mm Stereo Microscope Head 45° Binocular With 0.5x/1x Objectives 5x–10x, 1W LED - Euromex
Take advantage of the combination of a long working distance, versatile magnification and integrated LED lighting for precise, ergonomic inspection and documentation work. Order the Euromex stereomicroscope head directly via Metav Werkzeuge or consult the team for application-specific advice. Stereomicroscope head BE.1812 — 45° binocular head, 230 mm working distance A Stereomicroscope head BE.1812 designed for stereo inspection and manipulation with an extended working distance for larger specimens and tooling tasks Long 230 mm working distance for sample access 45° binocular head with dioptre adjustment Dovetailed 0.5x and 1x objectives included 5x and 10x total magnification options Integrated 1 W LED illumination Improved handling and ergonomic inspection with extended reach The 230 mm working distance provides a clear practical advantage when inspecting larger components or when tools and manipulators must be used beneath the optics. With a notably long working distance, operators can keep hands and instruments in the field of view without having to readjust the set-up constantly. This reduces handling time and improves throughput during repetitive quality checks, while the stereo viewing arrangement preserves depth perception for accurate alignment and fault localisation. Flexible magnification and comfortable optics for consistent results Equipped with dovetailed 0.5x and 1x objectives, the head offers 5x and 10x total magnifications, enabling rapid switching between overview and detail inspection. The 45° binocular head and dioptre adjustment allow individual visual correction and a comfortable viewing angle, which lowers operator fatigue during prolonged use. These optical choices translate into reproducible observations and fewer measurement errors in visual quality control tasks. Efficient illumination and practical setup for workshop environments The built-in 1 W LED delivers steady, low-heat lighting with a long service life and energy-efficient operation. The LED provides uniform illumination, aiding in the detection of surface defects and fine structures without introducing significant thermal load to sensitive specimens. For technical clarification or advice on integrating the head into an existing stereo-microscope stand or imaging chain, technical enquiries can be directed to Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Contact Metav Werkzeuge for tailored application advice and to secure the Euromex stereomicroscope head BE.1812 for your inspection workflow — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: BE.1812 Product type: Microscope head Brand: Euromex Facts Working distance: 230 mm Head angle: 45° Objectives included: 0.5x and 1x (dovetailed) Total magnification: 5x and 10x Illumination: 1 W LED Special features Binocular head with dioptre adjustment Stereo viewing for depth perception Delivered with dovetailed objectives Long working distance for tooling access Suitable for inspection and manipulation tasks FAQ What magnifications are available with this head? The Euromex stereomicroscope head BE.1812 provides total magnifications of 5x and 10x using the supplied 0.5x and 1x dovetailed objectives. Can the head accommodate corrective adjustments for both eyes? Yes — the 45° binocular head on the BE.1812 includes a dioptre adjustment to compensate for individual visual differences and improve comfort during extended inspection sessions. Is the illumination suitable for prolonged use on delicate samples? The integrated 1 W LED of the Euromex head offers low-heat, energy-efficient lighting that minimises thermal impact while maintaining uniform illumination suited to sensitive specimens. Can the supplied objectives be replaced or upgraded? The BE.1812 arrives with dovetailed 0.5x and 1x objectives; the dovetail interface enables objective exchange where compatible Euromex or matched accessories are available. What advantages does the long working distance provide in practice? A 230 mm working distance on the stereomicroscope head allows hands, tools or measuring probes to be used beneath the optics without constant repositioning, improving ergonomics and inspection speed. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
23mm 10× HWF Eyepiece Pair for NexiusZoom EVO - Euromex
Take advantage of the combination of 10× magnification and a 23 mm field number for more efficient, comfortable inspections; order the eyepiece pair directly via Metav Werkzeuge or consult our specialists for compatibility advice. Pair of HWF eyepieces 10×/23 mm — Eyepiece pair for NexiusZoom EVO by Euromex Pair of HWF eyepieces for NexiusZoom EVO microscopes, designed to provide a broad field of view for inspection and routine laboratory work Wide 23 mm field number for extended view High-contrast 10× magnification for detailed inspection Compatible with NexiusZoom EVO series Faster inspections through a wider field of view A larger field number of 23 mm increases the visible area through the eyepieces, reducing the need for frequent stage adjustments and speeding up visual workflows. The wider apparent field is particularly advantageous during routine quality checks and component sorting, because more of the sample can be observed at once. The specification “field number” denotes the diameter of the image circle in millimetres; a 23 mm field number therefore directly translates into a noticeably broader usable image, which improves throughput without compromising accuracy. Clearer detail with comfortable magnification and optical design The 10× magnification of this eyepiece pair balances detail and ease of use: it delivers sufficient enlargement for component inspection while maintaining a comfortable working distance and eye relief. The HWF designation indicates a high wide-field design that emphasises even illumination across the viewing field and reduces edge distortion. For technicians and lab personnel who spend extended periods at the bench, this combination reduces eye strain and supports precise visual assessment during prolonged use. Seamless compatibility and practical workshop benefits Designed for direct use with the NexiusZoom EVO series, the pair ensures quick exchange and standardised optical performance across systems. The set is supplied as a matched pair to maintain binocular balance and stereo perception, which is important for depth judgement during assembly or inspection tasks. As a modular, plug‑and‑play option from Euromex, these oculars simplify inventory choices: one compatible eyepiece pair covers a range of routines and reduces the need for multiple specialised eyepieces. Request availability or tailored advice from Metav Werkzeuge — our specialists in Emmerich can confirm compatibility, delivery options and cross-selling suggestions; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: NZ.6210 Label: Pair of HWF eyepieces 10×/23 mm for NexiusZoom EVO Manufacturer: Euromex Facts Magnification: 10× Field number: 23 mm Eyepieces per set: 2 Compatibility & features Compatible series: NexiusZoom EVO Ocular type: HWF Cross‑selling SKUs: NZ.1702-A; NZ.1702-AP; NZ.1702-B; NZ.1702-M; NZ.1702-P; NZ.1702-PG; NZ.1702-S; NZ.1702-U; NZ.1703-A; NZ.1703-AP; NZ.1703-B; NZ.1703-M; NZ.1703-P; NZ.1703-PG; NZ.1703-S; NZ.1703-U FAQ What does the field number mean for visual inspection? The field number refers to the diameter of the viewable image in millimetres; a 23 mm field number in this eyepiece pair provides a wider visible area, reducing stage movement and speeding up the inspection process. Are these eyepieces supplied as a matched set? Yes, the eyepieces are delivered as a matched pair of HWF eyepieces (NZ.6210) to preserve binocular balance and consistent image quality for stereo observation. Can these eyepieces be used for precision measurement tasks? The optical design and 10× magnification support detailed visual assessment; for calibrated measurement tasks, combine these oculars with measurement reticles or digital imaging accessories suited to the NexiusZoom EVO platform. Is the eyepiece pair compatible with all NexiusZoom EVO variants? The eyepiece pair was developed for the NexiusZoom EVO series and is compatible with standard ocular tubes used across that product family; check optical tube diameter and mounting style if a special configuration is used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23mm 10× HWF Eyepiece with Reticle, Single Optic for NexiusZoom EVO - Euromex
Take advantage of the combination of precise measuring and integrated reticle functionality to streamline documentation and repeatable inspections in the workshop; order the eyepiece directly via Metav Werkzeuge or consult the Metav team for compatibility advice. HWF eyepiece 10×/23 mm with reticle — Euromex reticle eyepiece HWF eyepiece 10×/23 mm with reticle for NexiusZoom EVO provides a wide, clear field and an integrated crosshair for precise alignment and measurement tasks in laboratory and production settings. 10× magnification for detailed observation 23 mm field number for wide viewing area Integrated reticle for precise alignment Compatible with NexiusZoom EVO series Maximise image area for faster inspection The wide 23 mm field number delivers a visibly larger viewing area than standard eyepieces, reducing the need to reposition samples during routine checks. A broader field shortens inspection cycles and increases throughput, especially where repeated visual comparisons are required. The HWF design preserves edge sharpness across the field, so the optical system presents a consistently usable image for longer, enabling quicker documentation of production tolerances with less operator fatigue. Precise alignment and measurement with an integrated reticle An integrated reticle supplies a reliable visual reference for locating features and aligning components under magnification. When used together with calibrated stage scales or measurement software, the reticle supports repeatable positional documentation and improves traceability in quality control procedures. The reticle is built into the optical path, which ensures stability and reduces parallax—important when small shifts would otherwise affect measurement reliability during serial inspections. Robust optical compatibility for NexiusZoom systems Engineered for compatibility with the NexiusZoom EVO series, the eyepiece fits into modular imaging workflows where interchangeability and consistent performance matter. The HWF ocular maintains the intended working distance and field geometry of the zoom system, so optical scaling and calibration remain predictable after swapping eyepieces. This compatibility lowers setup time for different inspection tasks and keeps calibration routines straightforward for technicians and operators. Practical benefits for workshops and laboratories Beyond optics, this ocular supports routine operational efficiency: fewer sample movements, faster visual decisions and easier alignment of fixtures. The combination of 10× magnification and a wide field offers a balance between detail resolution and contextual overview, suited to assembly inspection, metallography pre-checks and component sorting. The optical accessory is compact and simple to integrate, making it a pragmatic choice for busy benches where instrument uptime and repeatable results are priorities. For tailored advice on integrating this Euromex HWF eyepiece into existing NexiusZoom EVO systems, contact Metav Werkzeuge for expert consultation and direct supply from Emmerich Technical data Article number: NZ.6210-C Label: HWF eyepiece 10×/23 mm with reticle for NexiusZoom EVO Manufacturer: Euromex Core specifications Magnification: 10× Field number: 23 mm Number of eyepieces: 1 SKU / UID: NZ.6210-C Features and compatibility Eyepiece type: HWF (wide-field) Reticle: integrated crosshair present Product type: reticle eyepiece Compatible with: NexiusZoom EVO series FAQ What magnification does this eyepiece provide? The eyepiece delivers 10× magnification, which offers a useful compromise between detailed resolution and a broad overview for inspection tasks. Can the integrated reticle be used for measurements? The integrated reticle in this Euromex reticle eyepiece is suitable for alignment and comparative measurement when used alongside calibrated stage scales or imaging calibration routines. Is the eyepiece compatible with all NexiusZoom EVO microscopes? This HWF eyepiece is designed for compatibility with the NexiusZoom EVO series; confirm individual instrument fittings if specialised adapters or non-standard configurations are present. How does the 23 mm field number benefit inspection work? A 23 mm field number increases the visible field, reducing sample repositioning and speeding up visual inspections while maintaining edge sharpness across the view. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23mm Fall Protection Ring For StereoBlue Columns, Compatible With StereoBlue - Euromex
The compact design and precise fit combine to deliver reliable fall protection for StereoBlue columns with a 23 mm diameter, making it a straightforward spare part that limits downtime and supports safe equipment handling. Order the protective ring directly via Metav Werkzeuge or consult the Metav team for specification advice. SB.9045 Protective ring – Fall protection for StereoBlue columns, 23 mm The SB.9045 protective ring is a safety component intended to reduce the risk of accidental detachment from StereoBlue microscope columns with a 23 mm diameter, suitable for workshop and laboratory environments. Compatible with StereoBlue columns Fits 23 mm diameter columns Compact safety component Simple integration into existing setups Reduce equipment risk with targeted fall protection The SB.9045 serves as a compact safety solution that helps to lower the likelihood of components slipping from vertical supports. By providing a dedicated fall protection element for StereoBlue columns, the ring contributes to consistent operational safety and helps avoid interruptions caused by accidental drops. The straightforward purpose of this component makes it an efficient replacement part where a precise fit is required, supporting a reliable working environment and reducing the risk of damage to optical instruments. Seamless compatibility that eases workshop planning Designed specifically for columns with a 23 mm diameter, this protective ring ensures clear compatibility with the StereoBlue series. The precise dimensional match simplifies parts management: maintenance planners and buyers can specify the ring by its article number for direct procurement, reducing the need for trial fittings. Clear dimensional specification minimises ordering errors and aids inventory control, enabling workshops to maintain consistent supply for preventive maintenance or on-the-spot repairs. Practical integration and support for standard workflows As a dedicated accessory for StereoBlue column systems, the protective ring integrates into standard workflows without complex modification. It is intended for straightforward installation onto compatible columns, which keeps service times short and supports continuous operation. For further technical details or to confirm suitability in a particular assembly, Metav provides hands-on advice from Emmerich; this support helps to align component selection with operational requirements and ensures procurement decisions are based on accurate, application-relevant information. Contact Metav Werkzeuge for tailored advice and fast supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fit and availability. Technical data Article number: SB.9045 Name: Protective ring for StereoBlue columns Manufacturer: Euromex Facts Diameter: 23 mm Special features Compatible series: StereoBlue Product type: Protective ring UID: SB.9045 FAQ What is the primary function of this component? The SB.9045 protective ring provides targeted fall protection for StereoBlue columns, reducing the risk of components detaching and preventing potential damage. Which columns is the ring compatible with? Compatibility is specified for the StereoBlue series; the ring is intended for use with StereoBlue columns. What diameter does the ring fit? The ring is designed to fit columns with a diameter of 23 mm. Can this part be used to retrofit existing microscope stands? The protective ring is intended for installation on existing StereoBlue columns with a 23 mm diameter and can be specified as a replacement or spare part. Manufacturer / Responsible: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands, info@euromex.com
23mm Widefield Pair Eyepieces 10x, SWF Optics - Euromex
Combining a 10× magnification with a 23 mm field number delivers comfortable, expansive viewing suitable for education and routine laboratory inspection. Benefit from SWF super wide-field optics that reduce eye movement and speed up visual searches. Order the eyepieces directly via Metav Werkzeuge or contact our consultants for compatibility advice. Pair of Super Wide-field Eyepieces SWF 10×/23 mm — Euromex eyepiece, 10× magnification, 23 mm field Pair of Super Wide-field Eyepieces SWF designed to provide an expansive field for routine microscopy and teaching applications Super wide 23 mm field of view 10× magnification for general observation SWF optics for comfortable viewing Expanded field for faster, less tiring inspections The super wide-field design gives a substantially larger apparent image than standard eyepieces, making it easier to locate structures and follow samples across the slide. With 10× magnification combined with a 23 mm field number, the eyepiece pair reduces the need for frequent stage movement, which speeds up routine inspection tasks and lowers operator fatigue. SWF optics are engineered to maintain edge-to-edge clarity, so the observable area remains usable rather than merely magnified; this is especially helpful in teaching labs and quality-control benches where rapid orientation is essential. The optical construction balances field size and image sharpness to keep observations efficient without sacrificing usable resolution. Clear technical benefits and practical implications for the workshop The numerical combination of magnification and field number determines both perceived detail and the visible area. A 10× eyepiece presents a comfortable working magnification when paired with common objective lenses, while the 23 mm field number specifies the diameter of the usable image circle seen through the ocular. For buyers with limited optical background: a larger field number means a wider view, not higher power. The construction labelled SWF indicates super wide-field optics designed to match standard microscope tubes and accessory systems; this promotes straightforward integration into existing microscope setups without altering optical length or requiring special adapters. As a result, inspection throughput and operator comfort increase with minimal workflow disruption. Robust usability and suitability for teaching and routine labs Delivered as a matched pair, the eyepieces support binocular microscopes and contribute to symmetrical image quality across both optical channels. The pair configuration eases binocular alignment and provides consistent field presentation for both eyes, which reduces strain during extended use. The optical surfaces are designed for regular cleaning with standard lens tissue and solvent; routine maintenance preserves comfortable viewing and reliable performance. For classrooms and shared workshops, the wide apparent field assists learners in locating sample features more quickly, improving training efficiency and reducing supervision time while maintaining the precision expected in laboratory contexts. Contact Metav Werkzeuge today to confirm compatibility with existing microscopes and to arrange supply of the Euromex SWF eyepiece pair — our Emmerich-based consultants will advise on fit and delivery. Technical data Article number: AE.1836 SKU: AE.1836 Product: Pair of Super Wide-field Eyepieces SWF 10×/23 mm Type: Eyepiece Optical type: SWF Manufacturer: Euromex Facts Magnification: 10× Field number: 23 mm Special features Super wide-field optics Matched pair for binocular use Designed for routine laboratory and teaching applications FAQ What magnification do these eyepieces provide? The Euromex pair of super wide-field eyepieces provides 10× magnification, suitable for general observation and compatible with common objective lenses. How wide is the visible field through these eyepieces? The eyepieces feature a 23 mm field number, which indicates a large usable image circle for faster sample scanning. Are these eyepieces suitable for teaching laboratories? Yes, the wide apparent field and matched pair format make the eyepieces well suited to teaching settings and shared laboratory work. Can the eyepieces be cleaned with standard lens care products? Routine cleaning with lens tissue and appropriate optical solvents is compatible with the eyepieces and helps maintain comfortable viewing. Will these SWF eyepieces fit existing binocular microscopes? The SWF design is intended for standard eyepiece tubes; compatibility checks with specific microscope models are recommended and can be confirmed with Metav Werkzeuge. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com