High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
Glass Plain Insert For Cross Table, Plain Finish - Euromex
Take advantage of a precise, low-profile stage solution that supports reproducible sample positioning and simple maintenance; the combination of a flat glass surface and compatibility with cross-table stages optimises routine microscopy work. Order the component directly via Metav Werkzeuge or consult the Metav team for fit and delivery advice. Plain glass insert for cross-table stage (Accessory) by Euromex — precision-fit, low-profile A Plain glass insert for cross-table stage designed to provide a flat, stable viewing surface for microscopes and mechanical cross stages in laboratory and workshop settings. Precision flat glass surface Designed for cross-table stages Easy to clean and replace Consistent support for repeatable imaging and measurement A flat, high-quality glass surface reduces specimen tilt and mechanical play, enabling more consistent positioning on a cross-table stage. The insert acts as a stable support between specimen and stage mechanics, which helps to maintain repeatability when moving samples in X and Y. For inspection tasks where small positional variations matter, the improved stability from a correctly seated insert translates directly into faster setup times and fewer alignment checks. Low maintenance and long-term availability for production environments The design focuses on durability and straightforward upkeep: a smooth glass face resists common contaminants and is compatible with standard, non-abrasive cleaning methods, preserving optical clarity over time. Replacement is uncomplicated, so routine servicing does not disrupt workflow. This makes the accessory suitable for workshops and quality control benches where minimising downtime and simplifying spare-part management are priorities. Seamless integration that supports confidence in results Compatibility with cross-table stages ensures the insert sits flush with stage components and does not interfere with mechanical movement or focal plane adjustments. Because the insert presents a neutral optical interface, it avoids introducing unwanted reflections or refraction that could compromise image assessment. For customers requiring consistent inspection conditions, the accessory contributes to reliable visual inspection and measurement processes while remaining unobtrusive within existing setups. If additional technical matching is required, Metav Werkzeuge provides product advice and logistics from its Emmerich site. For tailored advice on fitting Euromex accessories and to secure reliable supply from Metav Werkzeuge, request specific compatibility verification and delivery options today. Technical data Article number: IS.9518 Description: Plain glass insert for cross-table stage Product type: Accessory / component UID: IS.9518 Facts No measurable specifications provided Special features Compatible with cross-table stages Flat glass insert for stable viewing surface Manufacturer: Euromex FAQ What is the primary function of this insert? The plain glass insert for cross-table stage provides a flat, stable viewing surface that supports reproducible sample positioning during microscopic inspection. Is the insert compatible with all cross-table stages? Compatibility depends on the dimensions and mounting arrangement of the cross-table stage; the insert is designed for standard cross-table configurations but verification against stage dimensions is recommended. How should the glass insert be cleaned? Clean with a soft, lint-free cloth and a mild, non-abrasive solution; avoid strong solvents and abrasive pads to maintain optical clarity and surface integrity. Will the insert affect optical quality or measurement accuracy? When properly seated, the insert minimises mechanical variables and does not introduce significant optical distortion, thereby supporting accurate visual inspection and repeatable measurements. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
Gorilla Glass Stage With Hole And Specimen Holder Left-Handed - Euromex
Combine Gorilla Glass durability with left-handed ergonomics to streamline specimen handling and improve positional stability. Order this specialised stage directly via Metav Werkzeuge or consult their experts for specification support. Left-handed object stage DX.9501-L — Gorilla Glass top & central aperture — Euromex DX.9501-L is a left-handed object stage designed for reliable sample positioning, featuring a Gorilla Glass surface, a central aperture for transmitted illumination and an integrated specimen holder for secure fixation Left-handed stage for ergonomic operation Gorilla Glass top for high scratch resistance Central aperture for transmitted illumination Integrated specimen holder for stable mounting Optimised handling for precise sample work The DX.9501-L object stage is engineered to support accurate positioning during inspection and documentation tasks. The left-handed layout suits benches and microscope stations arranged for left-side operation, reducing operator strain and improving workflow speed in repetitive tasks. The design focuses on minimising movement of the specimen once clamped, so measurements and imaging remain consistent across sequences. This results in fewer retakes and more predictable throughput for quality checks and routine microscopy. Robust surface and clear illumination for repeatable results A Gorilla Glass tabletop provides a hard, scratch-resistant surface that endures daily contact and cleaning without rapid wear. The central aperture permits transmitted light applications when paired with suitable illumination, enabling clearer contrast for thin or translucent specimens. The integrated specimen holder secures small samples without additional fixtures, improving reproducibility of inspection positions and enhancing overall stability during scanning or imaging procedures. Simple integration and practical workshop benefits The unit is a compact object stage that dovetails with standard microscope setups in laboratories and educational workshops, offering a pragmatic balance between durability and straightforward operation. Its uncomplicated construction means routine maintenance is limited to cleaning the glass surface and checking the holder for debris. For facilities aiming to standardise equipment across multiple benches, the DX.9501-L provides a resilient option that supports consistent handling practices and dependable daily use. Arrange a technical consultation with Metav Werkzeuge to confirm fitment and delivery for the DX.9501-L left-handed stage and benefit from tailored advice and swift dispatch from Emmerich Technical data Article number: DX.9501-L Product type: object stage Manufacturer: Euromex Label: Tisch mit Gorilla Glas, hole und specimen Halter. links handed UID: DX.9501-L Facts SKU: DX.9501-L UID: DX.9501-L Special features Gorilla Glass top Central hole / aperture for transmitted light Integrated specimen holder Left-handed design Object stage (Objekttisch) FAQ What materials make the top surface durable? The top surface uses Gorilla Glass, a hardened glass grade that gives the DX.9501-L long-term scratch resistance and easy cleaning suitable for routine laboratory use. Is this stage suitable for transmitted light microscopy? Yes. The DX.9501-L features a central aperture that supports transmitted illumination configurations when combined with an appropriate light source, enhancing contrast for thin specimens. Does the specimen holder accommodate small samples securely? The integrated specimen holder on the DX.9501-L from Euromex stabilises small samples for inspection and imaging, reducing unintended movement during manipulation. Can the left-handed configuration be used on right-hand benches? The left-handed layout of the DX.9501-L is optimised for left-side access; in right-handed bench arrangements the ergonomic advantage may be diminished, so assessment of the workstation layout is recommended. Which brand and SKU identify this object stage for ordering? This object stage is supplied by Euromex and identified as DX.9501-L for ordering and specification purposes. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
Gorilla Glass Stage With Hole And Specimen Holder Right-Handed - Euromex
Benefit from a Gorilla Glass work surface combined with a right‑hand specimen holder for secure, repeatable sample positioning; the integrated aperture enables transmitted‑light workflows while the sturdy stage design supports stable microscopy. Order the stage directly via Metav Werkzeuge or consult our specialists for compatibility advice. DX.9501-R microscope stage with Gorilla Glass and right‑hand specimen holder — Euromex The DX.9501-R is a right‑hand microscope stage designed for reliable sample handling, featuring a Gorilla Glass surface, a central aperture for transmitted light and an integrated specimen holder for precise positioning Gorilla Glass work surface for scratch resistance Right‑hand specimen holder for secure positioning Central aperture for transmitted light access Robust construction for stable microscopy Stable workspace that improves measurement repeatability The reinforced work surface delivers a flat, durable platform that supports consistent sample placement and measurement routines. Thanks to the Gorilla Glass top, the stage resists scratches and everyday wear, which preserves flatness and optical clarity over time. This translates into reliable repeatability for inspection, documentation and comparative analyses, reducing rework and saving operational time. Integrated aperture for transmitted‑light applications A central aperture allows easy use of transmitted‑light techniques without repositioning samples or auxiliary plates. Transmitted illumination improves contrast for thin or translucent specimens and simplifies inspections that rely on light passing through the sample. The built‑in aperture supports those workflows naturally, improving observation quality with minimal setup changes. Right‑hand specimen holder for secure handling The dedicated specimen holder on the right‑hand side provides secure clamping for slides or small specimens, aiding quick alignment and preventing unintended movement during examination. The holder’s placement suits common ergonomic setups and streamlines sample exchange, supporting efficient laboratory routines and reducing handling errors. Designed for professional workflows and simple integration Engineered as a specialist microscope stage, the unit integrates into existing workbenches and inspection stations where a stable, low‑maintenance surface is required. The combination of a scratch‑resistant top, secure specimen fixing and a transmission aperture supports both routine quality checks and more detailed optical investigations. For shops seeking trustworthy, long‑lasting stages, this solution balances durability with practical functionality. For procurement guidance or to confirm compatibility with a specific microscope system, contact Metav Werkzeuge for expert advice on the Euromex DX.9501-R microscope stage via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DX.9501-R UID: DX.9501-R Facts Product type: Microscope stage Manufacturer: Euromex SKU: DX.9501-R Special features Gorilla Glass work surface Central aperture for transmitted light Right‑hand specimen holder Designed for sample positioning and stable microscopy FAQ What material is the work surface made from? The work surface is Gorilla Glass, chosen for its scratch resistance and optical clarity when used with the Euromex DX.9501-R microscope stage. Is the stage suitable for transmitted‑light microscopy? Yes, the central aperture on this microscope stage permits transmitted‑light techniques, enabling improved contrast for thin or translucent specimens. Which orientation does the specimen holder have? The integrated specimen holder is right‑hand oriented, providing secure fixation on the right side of the stage for ergonomic sample handling. Can the stage support frequent sample exchanges? The robust design and fixed specimen holder make the stage well suited to workflows with frequent sample changes while maintaining positioning stability. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands, info@euromex.com
Green Filter Slider For Illumination Attachment, Filter Accessory - Euromex
Optimise illumination with a slide-mounted green filter that provides consistent colour correction and reliable positioning for illumination attachments; order the article directly via Metav Werkzeuge or consult our specialists for compatibility and delivery. Green slide filter »OX.9702« — Euromex slide-mounted green filter for illumination attachments The Green slide filter »OX.9702« is a slide-mounted filter designed for illumination attachments, providing controlled green-tinted lighting for optical inspection and imaging tasks. Slide-mounted for secure positioning Improves contrast and colour balance Compatible with illumination attachments Precise light shaping for consistent optical results A slide-mounted green filter alters the spectral composition of an illumination source to emphasise specific contrasts and tones. By reducing unwanted wavelengths and passing predominantly green light, this accessory supports clearer differentiation of features under bright-field illumination. The green filter design is particularly useful where selective colour emphasis improves visual inspection or photographic documentation. Its function as a polarisation accessory further aids in refining lighting conditions without complex adjustments to the light source itself. Stable mounting that integrates with existing setups The slide format ensures a reproducible position in the optical path and reduces the risk of lateral movement during use. Intended for use with compatible illumination attachments, the slide-mounted filter is straightforward to insert and remove, which speeds up workflow when different filters are required for sequential inspections. The mounting approach keeps alignment consistent, supporting repeatable observations and reducing setup time in routine measurement or inspection processes. Low-maintenance accessory suited to laboratory environments The simple construction of a slide-mounted filter means maintenance is limited to regular optical cleaning and careful handling. Gentle cleaning with lens tissue and appropriate optical solvents preserves the transmission properties and extends service life. Because the product is a dedicated illumination accessory, it integrates without modifying primary optics, helping to maintain the factory configuration of light sources and preventing unnecessary downtime. Choose the Euromex green slide filter OX.9702 for reliable illumination control — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: OX.9702 Item name: Green filter in slide for illumination attachment Product type: Filter / polarisation accessory Brand: Euromex Facts No numerical specifications provided in the available data Special features Colour: green Mounting: slide for illumination attachments Intended use: illumination / polarisation accessory FAQ What is the intended purpose of the green slide filter? The green slide filter OX.9702 is intended to modify illumination colour to improve contrast and tonal separation for optical inspection and imaging. How is the filter mounted into an illumination system? Mounting is slide-based, designed to be inserted into illumination attachments that accept slide-mounted optical filters. Can this filter be used alongside polarising elements? As a polarisation accessory, the component can be used in conjunction with polarising elements to refine the illumination spectrum and enhance certain contrast effects. Are the material and exact dimensions specified? Material and dimensional data are not provided in the supplied product information. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
Grommet for 99.430, Replacement Accessory - Euromex
Reliable spare-part choice for uninterrupted equipment operation: the rubber ring provides a secure fit and straightforward replacement for the matched component 99.430, reducing assembly time and the risk of operational interruptions. Order the replacement directly via Metav Werkzeuge or consult their specialists for compatibility checks. Rubber ring for 99.430 – replacement accessory for Euromex assemblies, resilient sealing ring A Rubber ring for 99.430 serves as a direct replacement seal and mounting aid for the associated Euromex assemblyand is designed to restore correct fit and function with minimal effort Direct replacement for item 99.430 Elastomeric sealing and damping function Quick press-fit installation Compatible with Euromex accessory range Ensure steady operation with a precise replacement part The spare ring is engineered to re-establish a secure fit where the original wear element has degraded, offering a practical way to avoid extended machine downtime. As a replacement component for the matching assembly, the part restores readiness quickly and reliably. The focus here is on measurable uptime gains and simplified parts management, making it an efficient choice for workshop maintenance and laboratory instrument servicing. Easier maintenance and rapid fitment for production workflows Replacement is straightforward and intended to be performed without special tools, enabling a quick exchange during routine service intervals. The ring’s vibration damping and sealing effect reduces the risk of loosening and ingress, which translates into fewer repeat interventions and lower overall service time. For inventory planning, the SKU reference ensures transparent procurement and traceable spare-part supply in maintenance cycles. Practical suitability and quality assurance for professional users Designed as an accessory within the Euromex ecosystem, the component supports standard repair procedures and spare-part logistics in industrial and educational settings. Its role in spare-part management helps maintain consistency across assemblies and facilitates predictable maintenance costs. When uncertainty arises about fit or application, technical advice is available to confirm compatibility and to recommend stocking levels for workshops and laboratories. Contact Metav Werkzeuge for spare-part supply and fitment guidance — central stock and expert advice from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: 99.431 Description: Rubber ring for 99.430 Product type: Accessory / Component Manufacturer: Euromex UID: 99.431 Numbers / Core data No dimensional or material specifications provided Designs / Special features Compatible with item 99.430 Elastomeric sealing and damping function Cross-selling references: 99.400;99.430 FAQ Is this ring compatible with the original Euromex assembly 99.430? Yes. The rubber ring for 99.430 is produced as a direct replacement for the corresponding Euromex component and restores the intended fit and sealing function. Can the replacement ring be installed without professional tools? Installation of the replacement ring for 99.430 is designed to be simple and typically requires only standard workshop tools or a press-fit action to achieve correct seating. What are the main benefits of fitting this spare ring? Fitting the spare ring reinstates a secure fit, improves damping and sealing performance, and helps to reduce the frequency of further interventions in the affected assembly. Are there alternative parts recommended alongside this ring? Cross-selling SKUs 99.400 and 99.430 are listed as related items; these can be considered when planning comprehensive maintenance or when other wear parts require replacement. How can maintenance teams confirm the correct spare is being ordered? Refer to the SKU 99.431 and the product description “Rubber ring for 99.430” when ordering; if clarification is required, Metav Werkzeuge can verify compatibility and advise on stocking quantities. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
Halogen NeoLED Replacement Lamp Unit for iScope - Euromex
Take advantage of a genuine Euromex spare lighting module that restores reliable illumination and maintains optical performance; ideal for quick field replacement and minimal downtime—order via Metav Werkzeuge or consult the Metav team for compatibility advice. Halogen NeoLED replacement unit for iScope — Euromex replacement lighting module The Halogen NeoLED replacement unit for iScope is a spare illumination module for Euromex iScope microscopes, designed to restore or upgrade the instrument’s light source with direct compatibility and straightforward replacement. Direct fit for iScope models Supports Halogen and NeoLED light sources Genuine Euromex spare part Reduces microscope downtime Rapid restoration of usable illumination for immediate work A genuine Euromex replacement lighting module provides a fast way to recover full optical function after lamp failure. Replacing the defective component returns consistent reliable illumination and preserves contrast and detail in routine inspections. For industrial or educational workbenches where interruptions are costly, this spare module offers an efficient path to renewed operation and minimal loss of productive time. The design focuses on practical restoration rather than on-site servicing, keeping processes moving. Simple compatibility and installation with iScope stands The unit is engineered as a direct replacement for the iScope series, ensuring compatibility with existing mounts and electrical interfaces. Installation is typically straightforward: the module fits into the original lamp housing and reconnects to the existing light feed, avoiding complex adaptations. This approach reduces installation time and the need for specialised tools. Where a choice of light source exists, Halogen provides a warm spectrum while NeoLED delivers higher efficiency and cooler operation—selecting the appropriate option supports either classical colour rendition or improved thermal behaviour. Maintain optical performance and extend equipment life Replacing an ageing lamp with a genuine spare helps to maintain the instrument’s original optical performance, safeguarding inspection accuracy and repeatability. A proper light source contributes to consistent measurement conditions and clearer imaging, which is particularly important in quality control and teaching environments. Choosing an authorised spare also aligns with best-practice maintenance: preserving component compatibility, avoiding improvised fixes and reducing the risk of collateral damage to the optical assembly. Contact Metav Werkzeuge today for genuine Euromex replacement lighting, technical guidance and secure supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.9994 SKU: IS.9994 Label: Halogen NeoLED replacement unit for iScope Product type: Replacement lighting Model series: iScope Manufacturer: Euromex Numbers / Core Technical Data No numerical performance data provided No power ratings supplied No dimensional data supplied Special features / Versions Genuine Euromex spare part Compatible with iScope series Supports Halogen and NeoLED light sources FAQ Is this unit compatible with all iScope models? Compatibility is intended for the iScope series; the replacement unit fits the iScope family of stands and housings as specified by Euromex. Can the Halogen and NeoLED options be interchanged? The module supports Halogen and NeoLED types where the instrument configuration permits; selection depends on the specific iScope setup and intended lighting characteristics. Will replacing the lamp require additional parts? In most cases the unit is a direct spare and connects to the existing lamp housing without extra components; confirm the iScope variant before purchase. How does a genuine Euromex spare benefit long-term use? Using an authorised spare preserves original optical alignment and avoids compatibility issues, supporting consistent inspection quality and reducing the risk of further faults. What should be done if technical data is required before ordering? Technical queries and requests for additional data can be directed to Metav Werkzeuge via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
Illumination Station 2 Flexible Goose-Neck Light Guides Ring Light Transmitted Light Mountable Up To 44mm - Euromex
Take advantage of the combination of multiple power inputs, support for two self-supporting gooseneck light guides and both ring and transmitted table lighting to streamline inspection workflows; order the unit directly via Metav Werkzeuge or consult our specialists for assistance. LE.5112 Illumination Station — Light source with multiple power inputs and mountable design The LE.5112 illumination station provides versatile lighting for microscopy workbenches and inspection setups, supporting two gooseneck guides, a ring light and transmitted table illumination for standalone use or mounting on stereo microscope columns Multiple power inputs for varied light sources Supports two self-supporting goosenecks Integrated ring and transmitted table lighting Mountable on columns up to 44 mm diameter Flexible illumination that adapts to varied inspection tasks The unit offers multiple power inputs so different illumination modules can be connected and controlled without frequent reconfiguration. By accepting two gooseneck light guides alongside a ring light and transmitted table lighting, the station supplies targeted, shadow-reduced light for detailed work. This flexibility reduces setup time and improves throughput in routine inspection or assembly tasks, while the configurable outputs make it straightforward to switch between contrast-enhancing transmitted illumination and directed spot lighting for surface checks. Simple integration for microscopes and bench setups Designed for both bench-top and mounted applications, the station is mountable on stereo microscope columns with diameters up to 44 mm and is compatible with 35 mm and 25 mm column sizes. Standalone operation is also supported, so the lighting unit can serve as a fixed bench light or be paired with a stereo microscope. The installation options allow easy retrofitting into existing inspection lines and reduce downtime during changes of layout, enabling faster transitions from one task to the next. Consistent lighting for reliable precision inspection Consistent, controllable illumination is essential for accurate examination; the station delivers flexible illumination that helps to reveal fine surface details and minimise false rework. The combination of ring and transmitted lighting provides even field illumination for photography and measurement, while the two goosenecks permit angle and intensity adjustment for targeted observation. For specialised technical queries or additional specifications, Metav Werkzeuge can provide further data and advice to ensure the lighting configuration meets precise inspection requirements — contact via info@metav-werkzeuge.com or +49 2822 7131930. For dependable, adaptable microscopy lighting choose the Euromex LE.5112 from Metav Werkzeuge — our Emmerich team can advise on application fit and delivery options, reach us at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: LE.5112 Manufacturer: Euromex Product type: Light source UID: LE.5112 Facts Compatible column diameters: up to 44 mm Also fits 35 mm and 25 mm columns Supports 2 self-supporting gooseneck light guides Special features Multiple power inputs for varied illumination sources Ring light and transmitted table lighting supported Standalone operation or microscope-column mounting FAQ What types of lighting does the station support? The station supports two self-supporting gooseneck light guides, a ring light and transmitted table lighting for mixed illumination applications with the Euromex LE.5112 light source. Can the unit be mounted on a stereo microscope column? Yes, the LE.5112 is mountable on stereo microscope columns up to 44 mm diameter and is also compatible with 35 mm and 25 mm columns. Is standalone operation possible without a microscope? Standalone operation is supported; the lighting unit can be used independently on a bench for inspection or assembly tasks. How many adjustable goosenecks can be connected? Two self-supporting gooseneck light guides can be connected and positioned independently for targeted lighting. Is the lighting suitable for precision inspection and documentation? The combination of ring and transmitted table illumination with directed goosenecks provides even, controllable lighting that supports precision inspection and photographic documentation with reduced shadows. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Netherlands, info@euromex.com
ImageFocusLabs Metallography Grain Size Analysis Software ASTM E112, Porosity and Phase Analysis - Euromex
Take advantage of ASTM E112 conformity and automated image evaluation for consistent, traceable metallographic results; the package performs grain size, porosity, decarburisation and phase analysis to speed quality decisions. Order the ImageFocusLabs software directly via Metav Werkzeuge or ask our consultants if needed. ImageFocusLabs software package SW.1051-G — ASTM E112-compliant metallographic analysis software The ImageFocusLabs software package is a dedicated metallographic analysis tool for laboratory and production quality control, offering automated grain size evaluation and porosity, decarburisation and phase quantification in accordance with ASTM E112. ASTM E112-compliant grain size evaluation Automated porosity and phase quantification Designed for metallography laboratories and QA Results with reproducible, traceable reports Standards-based measurement for reliable material characterisation The package implements ASTM E112 routines so that grain size determinations follow established protocols, ensuring comparability across batches and laboratories. By using standardised evaluation algorithms, the software delivers reproducible results that support material certification and failure analysis. This objective, norm-driven approach reduces ambiguity in metallographic interpretation and helps integrate measurements into documented quality systems. Automated workflows that accelerate laboratory throughput Automated image processing reduces manual steps while maintaining methodological rigour: measurements are executed consistently and data are captured in a structured way. The emphasis on automated analysis shortens sample-to-report times and decreases operator variance, which is especially valuable in high-volume inspection environments. The software’s operation is designed to complement existing microscope setups and to streamline routine inspection cycles. Clear quantification and reporting for decisive quality control Outputs include quantified porosity metrics, detected decarburisation zones and phase fraction estimates presented in concise, traceable formats. Reports are formatted to support documentation requirements and to facilitate comparison between production lots or incoming materials. By providing clear, measurable findings, the software contributes directly to prompt process adjustments and informed acceptance decisions in metallurgical quality assurance. For integration advice, licence information and to discuss how ImageFocusLabs SW.1051-G can fit existing laboratory workflows, contact Metav Werkzeuge — Metav provides regional supply and technical guidance from Emmerich, ensuring rapid delivery and professional support Technical Data Article number: SW.1051-G Product name: ImageFocusLabs software package — metallographic grain size analysis (ASTM E112) Manufacturer: Euromex Microscopen bv Product type: Software UID: SW.1051-G Facts Standard: ASTM E112 Measurement types: grain size, porosity, decarburisation, phase analysis Special features Software package for metallographic analysis Grain size evaluation according to recognised standard Automated porosity quantification Decarburisation and phase fraction analysis FAQ What analyses are included in the package? The ImageFocusLabs software performs grain size evaluation, porosity quantification, decarburisation detection and phase analysis as stated in the product description. Is the software compliant with industry standards? Yes — the software implements evaluation routines aligned with ASTM E112 to ensure standard-conformant grain size measurements. Can the software quantify porosity and phases automatically? Automated porosity and phase quantification are core functions of the ImageFocusLabs package, enabling consistent, numeric output for quality records. Which users will benefit most from this product? Materials laboratories, metallography technicians and production quality teams benefit from standardised measurements and traceable reporting delivered by the software. What identifier should be quoted when enquiring about the product? Reference SKU SW.1051-G and the ImageFocusLabs software package when requesting information or placing an order. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
iScope NeoLED Replacement Light Unit 32, Replacement Module - Euromex
Take advantage of a direct, compatible replacement lighting module that restores consistent illumination for inspection tasks and reduces downtime through quick installation. The unit's LED-based design and straightforward fit make it a practical choice for workshops that rely on reliable microscopy lighting; order via Metav Werkzeuge or consult the team for compatibility questions. NeoLED Replacement Unit for iScope — LED replacement lighting, compatible with iScope microscopy series The NeoLED Replacement Unit for iScope is a compact replacement lighting module for iScope microscopes, engineered to restore uniform illumination for visual inspection and component evaluation in workshop and laboratory environments. Direct replacement for iScope series Energy-efficient LED illumination Easy plug-in installation Robust design for continuous use Consistent illumination to support reliable inspection results The LED lighting module provides a stable light source that restores consistent illumination, reducing the need for repeated adjustments during inspections. Designed for compatibility with the iScope series, the unit helps maintain image clarity for routine quality checks and visual measurements. By replacing a worn or failed lamp with this replacement lighting module, optical contrast and colour rendition remain dependable, which supports precise visual assessment without introducing complex adjustments or calibration routines. Rapid swap-in replacement to minimise production delays A straightforward installation procedure allows the lighting module to be replaced quickly, so inspection workflows experience minimal interruption. The compact lighting module fits the iScope mounting interface and can be refitted without specialist tools, enabling fast return to operation. This practical reliability contributes to reduced downtime in busy workshops and inspection bays, preserving throughput while ensuring that visual inspection stations remain fully operational. Durable construction and energy-efficient operation for long-term value Built to suit workshop and laboratory conditions, the unit uses energy-efficient LED technology to deliver longer operational life and lower thermal stress compared with conventional lamps. The result is a lighting solution that demands less frequent replacement, supports stable illumination over extended periods, and reduces consumable handling. The unit’s robust design addresses the practical needs of professional environments where reliable lighting is essential for consistent results and lower maintenance effort. For a dependable iScope lighting replacement, contact Metav Werkzeuge to secure the NeoLED module and confirm compatibility with existing equipment; reach Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: IS.9993 Name: NeoLED Replacement Unit for iScope Product type: Replacement lighting Model series: iScope Manufacturer: Euromex Core data No numerical specifications provided in the source data Special features Compatible with iScope series LED-based lighting module Replacement unit for microscopy illumination Brand: Euromex SKU/UID: IS.9993 FAQ Is the lighting module compatible with all iScope models? The NeoLED Replacement Unit for iScope is designed for the iScope model series; compatibility should be checked against the specific microscope variant before installation. How straightforward is installation of the NeoLED Replacement Unit? Installation is intended as a simple swap-in replacement for the iScope lighting assembly, enabling rapid refit without specialised tooling. Will the NeoLED unit improve image consistency compared with older lamps? Yes, the LED-based replacement lighting offers more stable illumination and reduced thermal fluctuation, improving consistency for visual inspections and microscopy tasks. Can the unit be identified by SKU for ordering and verification? The replacement module is listed under SKU IS.9993 (NeoLED Replacement Unit for iScope) for ordering and compatibility checks. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
iScope NeoLED White Slide-In Filter for Reflected Light Illumination, Compatible with IS.9230 - Euromex
Taking advantage of a compact white slider filter that is compatible with NeoLED reflected‑light attachments ensures consistent, neutral illumination for material science inspection; combine reliable compatibility with quick slide‑in handling for efficient microscope workflows. Order the component directly via Metav Werkzeuge or consult the team for integration advice. iScope IS.9726 White Slider Filter — white filter for NeoLED reflected‑light illumination attachment (material science) The iScope IS.9726 White Slider Filter is a purpose‑built white filter in a slide holder for material science applications, designed to fit the NeoLED reflected‑light illumination attachment of the iScope series *Neutral white filtration for accurate colour rendition *Compatible with NeoLED reflected‑light attachment *Quick slide mounting for fast filter changes Consistent illumination for reliable material inspection A neutral white filter provides a stable, colour‑accurate light source that supports repeatable visual and documented inspections in material science. By maintaining a consistent spectral balance, the filter helps to reduce variability between sessions and between different illumination setups; this improves the reliability of comparative observations and digital image capture under reflected‑light conditions. The result is fewer ambiguous results and a clearer basis for evaluative decisions in metallography and surface analysis. Simple integration that keeps workflows moving The slider format ensures easy installation and swift exchange without the need for additional tools. The slider mechanism allows operators to introduce or remove the filter quickly, supporting fast transitions between contrast modes or sample types during routine inspection. Compatibility with the NeoLED reflected‑light attachment means straightforward integration into existing iScope illumination stacks, reducing downtime and helping maintain a smooth inspection routine on the shop floor or in the laboratory. Optimised for material science reflected‑light microscopy Designed for use with material science reflected‑light setups, this filter supports neutral illumination required for assessing surface finish, grain structure and coatings. The accessory is listed for cross‑compatibility with the NeoLED attachment (see related SKU IS.9230), simplifying procurement and ensuring the component matches common iScope illumination configurations. For further technical clarifications or additional data, the Metav team is available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Contact Metav Werkzeuge for precise compatibility checks and expert advice on ordering the Euromex iScope IS.9726 white slider filter for NeoLED reflected‑light attachments Technical Data Article number: IS.9726 Product type: Filter / Polarisation accessory Model series: iScope Manufacturer: Euromex Facts Cross-compatible with NeoLED reflected‑light attachment (IS.9230) Special features White slider filter For material science reflected‑light illumination Slide mounting for quick exchange FAQ What illumination accessory does this filter fit? The filter fits the NeoLED reflected‑light illumination attachment and is listed for cross‑compatibility with the related SKU IS.9230; the Euromex iScope IS.9726 is designed as a slide‑in white filter for that setup. Is this product suitable for metallography work? Yes, the IS.9726 white slider filter is intended for material science and reflected‑light microscopy, supporting tasks such as surface inspection and grain structure assessment. How is the filter mounted and exchanged? The filter uses a slide mechanism for quick mounting and removal, enabling fast changes between illumination options without additional tools when used with the compatible NeoLED attachment. Will the filter alter colour rendering in images? The purpose of the white filter is to provide a neutral spectral balance so that colour rendition is consistent and reproducible for visual inspection and image capture with the iScope reflected‑light configuration. Is the filter supplied with the NeoLED attachment? The IS.9726 is supplied as a separate accessory; compatibility is indicated for the NeoLED reflected‑light attachment and the related iScope series components. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
iScope NeoLED Yellow Slide Filter for Reflected Light Illumination, Compatible with IS.9230 - Euromex
Enhance surface contrast and reduce glare for reliable material inspection with this yellow optical filter in a slide-in holder; its compatibility with the iScope NeoLED incident-light attachment makes integration straightforward. Order the filter directly via Metav Werkzeuge or consult our specialists for application advice. Yellow slide-in filter for material science NeoLED incident-light attachment — Filter / Polarisation accessory by Euromex The Yellow slide-in filter for material science NeoLED incident-light attachment is a purpose-built optical accessory that fits the iScope series incident-light module to enhance surface contrast and manage spectral illumination during material inspections. Yellow contrast filter for incident-light microscopy Slide-in holder for quick fitting Compatible with iScope NeoLED attachment Suited to material science illumination Better surface contrast with minimal image processing A dedicated yellow optical filter delivers improved visual separation of surface features under incident-light conditions, making it easier to detect subtle relief, oxidation or coatings on metallic and non-metallic specimens. By modifying the illumination spectrum at source, the accessory reduces the need for intensive post-processing, which shortens documentation workflows and improves repeatability. The filter’s spectral effect emphasises differences in surface reflectivity, supporting faster, more reliable decisions in routine material analysis. Fast, secure fitting to minimise inspection downtime The slide-in holder design allows technicians to insert or remove the filter quickly without tools, reducing interruption to inspection sequences. Compatibility with the iScope NeoLED incident-light attachment ensures alignment and stable positioning once installed. For workshops and laboratories where throughput matters, the fast-change mechanism supports efficient sample throughput and lowers the risk of handling errors during repeated tests. Practical handling and routine-maintenance benefits Constructed as an optical insert for everyday use, the filter is easy to clean with an optical-grade cloth and standard lens cleaner, supporting long-term clarity and consistent results. The slide format protects the optical surface when not in use and helps to preserve the condition of microscope objectives by reducing direct glare and stray reflections. Regular, simple maintenance keeps the accessory performing reliably across repeated inspection cycles. Streamlined integration into microscopy workflows Designed for use in material-science illumination, the filter supports standard documentation routines and enhances image consistency for reporting and quality control. Its role in pre-modifying light quality simplifies calibration steps and contributes to more reproducible imaging conditions—an advantage when multiple operators or shifts handle the same inspection tasks. The accessory is a practical addition to any incident-light setup aimed at accurate surface assessment. For precise contrast control in material inspection, procure the Euromex yellow slide-in filter via Metav Werkzeuge—contact Metav Werkzeuge in Emmerich for tailored application advice and reliable supply. Technical data Article number: IS.9724 Product type: Filter / Polarisation accessory Model series: iScope Manufacturer: Euromex Core data Compatible attachment SKU: IS.9230 UID: IS.9724 Special features Yellow optical filter in slide-in holder Designed for material science incident-light NeoLED attachments Compatible with iScope incident-light accessories FAQ What improvement does a yellow filter provide under incident light? The yellow filter shifts the illumination spectrum to enhance contrast and reduce glare, which helps reveal surface details more clearly when using the incident-light attachment on the iScope series (SKU IS.9724). Is this filter compatible with the NeoLED incident-light module? Yes, the accessory is specifically designed for use with the NeoLED incident-light attachment and fits the iScope incident-light assembly referenced by IS.9230. How is the filter installed and removed? The filter uses a slide-in holder that permits tool-free insertion and removal, ensuring quick changes during inspection without the need for additional fixtures. Can the filter be used for general microscope lighting tasks? The accessory is intended for material-science incident-light applications and is suitable where surface contrast under directed illumination is required; it complements standard microscopy illumination strategies. What maintenance is recommended for optical longevity? Clean the optical surface with an optical-grade cloth and appropriate lens cleaner; store the filter in its holder when not in use to protect the glass and preserve clarity. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
iScope Polarising Microscope IS.1053-POLRi, Polarisation Accessory - Euromex
Benefit from precise polarisation analysis and a modular accessory design that integrates into existing inspection setups; order directly via Metav Werkzeuge or consult our specialists for application advice. iScope – polarising microscope IS.1053-POLRi, accessory component by Euromex The iScope – polarising microscope IS.1053-POLRi is a compact accessory component designed to enable polarisation-based contrast for microscopy tasks in materials inspection and laboratory analysis. Polarising optical analysis capability Modular accessory for iScope instruments Euromex manufacturing quality Improve contrast and material discrimination with polarisation The polarising module converts standard bright-field observation into polarisation-capable inspection, enabling clearer visual separation of birefringent structures and internal stresses. By integrating a dedicated polarisation optical path, the unit supports enhanced identification of features that remain indistinct in conventional illumination. This effect is particularly useful for geology, polymer inspection and materials research where polarisation reveals anisotropy and layered structures. Flexible integration that preserves existing workflows Designed as an accessory component, the module mounts into compatible microscope stages or optical ports, allowing retrofitting without major system changes. The modular approach preserves existing objectives and measurement accessories while extending functionality. This configuration reduces downtime and maintains laboratory throughput, so inspection cycles remain efficient and predictable. Technical clarity for routine quality control Polarisation simplifies certain examinations by producing contrast based on optical anisotropy rather than solely on colour or opacity. For routine quality control, this means faster detection of inconsistencies such as stress patterns, fibre orientation or crystalline phases. The polarising capability therefore supports decisive pass/fail assessments while keeping documentation straightforward for traceability and reporting. Trusted production and repeatable results As a Euromex component, the module aligns with established optics manufacturing standards, delivering consistent alignment and repeatability. The Euromex heritage in microscopy components ensures optical tolerances and mechanical interfaces are maintained, which is essential for reproducible inspection results and method validation in laboratory or workshop environments. Practical consideration and purchasing guidance When specifying the polarising accessory, verify mechanical compatibility with the host instrument and required optical path length. The module is catalogued as an accessory/component and pairs well with complementary items listed under the related SKU. For clarification on fitment, illumination options or documentation needs, technical details can be provided on request to support correct integration and reliable measurement outcomes. For detailed application advice or to source this Euromex polarising microscope accessory, contact Metav Werkzeuge GmbH in Emmerich by email at info@metav-werkzeuge.com or by phone +49 2822 7131930 for immediate consultation and supply options. Technical Data Article number: IS.1053-POLRi Product label: iScope – Polarisationsmikroskop IS.1053-POLRi Product type: Accessory / Component Manufacturer: Euromex UID: IS.1053-POLRi Facts No numerical data provided in the product feed Special features Cross-selling SKU: IS.1052-PLPOLRi Intended application: polarisation microscopy component FAQ What does the polarising accessory do? The polarising accessory provides an optical polarisation path that enhances contrast for birefringent materials; the iScope – polarising microscope IS.1053-POLRi supports visualisation of stress, fibre orientation and crystalline structures. Is the component compatible with other iScope instruments? Compatibility information and suggested pairings are indicated by the accessory classification; the IS.1053-POLRi is designed as a modular component for the iScope family and related Euromex instrument configurations. Can this accessory be used for polymer inspection? Yes, the polarising function is well suited for polymer analysis where anisotropy and internal stress patterns must be identified quickly and reliably using the IS.1053-POLRi. Does the module require additional illumination or filters? Specific illumination requirements depend on the host instrument; the component is supplied as an accessory and may be used with standard microscope illumination systems adapted for polarisation workflows. Where can further technical documentation be obtained? Technical documentation and application notes for the IS.1053-POLRi can be requested from the supplier or manufacturer to ensure correct integration and measurement practices. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
iScope S40x Phase Contrast Phase Ring Slide, For Phase Contrast Objectives, Ø40mm - Euromex
Take advantage of the precise phase contrast control and straightforward system compatibility to improve contrast imaging with minimal setup. Combine reliable phase rings for S40x objectives and the compact slider design for faster switching between contrast modes — order or request advice from Metav Werkzeuge for integration support. Phase contrast slider IS.9194 — Accessory for iScope with S40x phase rings (Euromex) The Phase contrast slider IS.9194 is an accessory component that provides dedicated phase rings for S40x IOS objectives, enabling phase contrast microscopy on the iScope platform and supplied without objective, condenser or centring telescope. Phase rings for S40x phase contrast objective Designed for iScope IOS objective mount Compact slider enabling quick phase switching Supplied without objective, condenser or centring telescope Improved contrast for transparent samples with phase ring precision The phase contrast principle is applied here by introducing a ring filter into the optical path; the phase ring alters light that has passed through a specimen so that differences in optical path length are translated into visible contrast. This makes otherwise translucent structures visible without staining, which is especially valuable for live-cell observation or thin sections. The supplied phase rings are matched to the S40x magnification, so the optical correction is preserved and image clarity is supported by precise phase alignment rather than post-processing. Engineered for seamless fit into the iScope optical path Compatibility with the iScope IOS objective interface ensures the slider can be integrated as a genuine accessory component. The module is intended to be fitted into the objective mount where the phase ring aligns with the objective's phase plate. Note that the item is provided without objective, condenser or centring telescope, so the existing illumination and objective setup must be verified for phase contrast operation. When installed, the slider enables efficient switching between brightfield and phase contrast modes while maintaining the optical axis and facilitating repeatable results. Streamlined workflow and consistent imaging for routine use By centralising phase rings in a compact slider, laboratory workflows benefit from faster mode changes and reduced mechanical handling of delicate optics. The accessory supports routine microscopy tasks where repeatability and quick transitions are required, such as teaching demonstrations or comparative sample analysis. Regular inspection of optical alignment is recommended; because the product is an accessory component, maintenance focuses on keeping optical surfaces clean and ensuring the phase ring seating is secure for consistent precision alignment. Contact Metav Werkzeuge for tailored advice on integrating the Euromex Phase contrast slider IS.9194 into existing iScope setups and for procurement details—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: IS.9194 Model series: iScope Product type: Accessory / Component Label: Phase contrast slider with phase rings for S40x IOS objective for iScope Facts Objective magnification: S40x SKU / UID: IS.9194 Special features Phase rings for S40x phase contrast objective Compatible with iScope IOS objective mount Supplied without objective, condenser or centring telescope Accessory for phase contrast microscopy FAQ What does the phase ring slider do? The phase ring slider IS.9194 places matched phase rings into the optical path so phase differences in transparent specimens are converted into visible contrast for clearer observation with the iScope. Is the slider compatible with other objective magnifications? The supplied rings are specified for S40x objectives; for other magnifications, similarly matched phase rings are required to maintain correct phase contrast and alignment. Does the delivery include an objective or condenser? No, the product is supplied without objective, condenser or centring telescope; it is an accessory component intended to be used with compatible iScope optics and illumination. How is alignment checked after installation? Alignment is verified by ensuring the phase ring and objective phase plate are concentric and by observing a known phase test specimen; small adjustments to condenser position or centring optics may be necessary. Can the slider be used for live-cell imaging? Yes, when combined with appropriate objectives and illumination, the slider enables non-invasive contrast enhancement suitable for live-cell observation and other preparations where staining is not desirable. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
iScope Slide with Green and Blue Filters, Accessory - Euromex
Take advantage of the green and blue filter combination to improve visual contrast during optical inspections and speed up routine checks; the compact slide format ensures quick changes and consistent alignment. Order or request procurement advice via Metav Werkzeuge for straightforward supply and expert consultation. iScope filter slide IS.9731 — Green and blue filters, accessory by Euromex A filter slide with green and blue filters for the iScope that provides simple, repeatable contrast enhancement for microscopy inspection tasks Green and blue optical filters Designed for iScope series Slide format for quick changeovers Improves contrast for inspections Faster defect detection through clearer contrast The combination of a green filter and a blue filter offers practical visual separation of features under transmitted or reflected illumination, yielding immediate contrast enhancement that supports quicker decisions on the inspection bench. By filtering specific spectral bands, the slide emphasises edges and surface irregularities without altering the specimen, so routine visual checks and preliminary assessments become more reliable. For process engineers and quality technicians, this accessory contributes to a measurable reduction in inspection time and fewer follow-up measurements. Easy integration into existing workflows Designed as a compact slide accessory for the iScope series, the unit fits into the instrument's filter slot to enable fast swapping between filter states during an inspection run. The slide format supports consistent alignment, reducing the need for recalibration when changing filters and thus maintaining throughput on production lines. Because the device is an accessory rather than a standalone module, it integrates seamlessly into established microscopy setups and helps keep handling and training requirements minimal. Practical applications and everyday benefits This filter slide is particularly useful in routine quality control, educational demonstrations and any setting where enhanced visual differentiation is needed without complex imaging equipment. The accessory is well suited to quick surface inspections, contrast-based sorting and preliminary part verification. Technical teams can rely on the iScope filter slide IS.9731 as a low-maintenance tool that complements quantitative measurement instruments by improving the speed and effectiveness of visual checks. Request procurement or technical advice for the Euromex iScope filter slide IS.9731 from Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and supply options Technical Data Article number: IS.9731 Brand: Euromex Product type: Accessory / Component Model series: iScope UID: IS.9731 Facts Filters: green, blue Special features Green and blue filters Slide format for filter slot Compatibility: iScope series Label: Slider with green and blue filter for iScope FAQ Is this slide compatible with all iScope models? The filter slide IS.9731 is designed for the iScope series and fits instruments that provide a dedicated filter slot for slide insertion. Can the filters be used for both transmitted and reflected light? Yes, the green and blue filters on the slide are suitable for contrast enhancement under either transmitted or reflected illumination, depending on the iScope configuration. Does the accessory require recalibration of the microscope? The slide is intended for quick changes and consistent alignment; in most cases no full recalibration is required after insertion, though routine checks are recommended. Is the slide suitable for repeated use in a production environment? The Euromex filter slide IS.9731 is built as a practical accessory for repeated handling and quick swap operations in inspection workflows. How does the filter slide help in quality control? By emphasising edges and surface details through spectral filtering, the slide improves visual detection of defects and speeds up preliminary inspections before more detailed measurement. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
LaboPad-WiFi 4 Tablet Camera Wi‑Fi Enabled, High‑Resolution Imaging - Euromex
A compact, WiFi-equipped tablet camera that streamlines image capture and documentation for education and laboratory workflows; combine wireless convenience with the proven LaboPad series design and order the LaboPad-WiFi 4 directly via Metav Werkzeuge or ask our consultants if needed. LaboPad-WiFi 4 – Tabletkamera by Euromex, WiFi-enabled tablet camera for digital microscopy The LaboPad-WiFi 4 is a WiFi-enabled tablet camera designed for digital microscopy and straightforward documentation in teaching, inspection and routine laboratory tasks. WiFi streaming for wireless image transfer Designed for tablet-based microscopy workflows Compact form for bench and classroom use Euromex LaboPad series quality and compatibility Faster documentation through wireless capture The WiFi capability of this tablet camera enables wireless streaming of live images to compatible tablets and control devices, removing the need for constant cable connections and reducing setup time. Wireless transfer supports more fluid documentation and immediate sharing of observations, which speeds up standard operating procedures and grading in educational settings. The WiFi connection is explained here as a local network link that transmits image data in real time; this removes the bottleneck of physical connections while keeping image capture straightforward and reproducible. Practical integration for classrooms and workbenches Its tablet-centred concept is intended to simplify daily routines: by connecting to a tablet, the device turns a conventional workspace into a documented workstation with fewer peripherals. The compact format supports quick repositioning on the bench and easy storage between lessons or shifts, helping to maintain an organised work area. For those new to digital microscopy, a tablet camera acts as an intuitive interface: the familiar touchscreen display becomes the live view and control panel, lowering the learning curve and allowing faster adoption among students and technicians. A dependable supply chain and support for precision tasks Sourcing the camera through an experienced partner provides tangible logistical and service benefits. Metav Werkzeuge combines broad product availability with a committed supply centre in Emmerich, offering a wide portfolio and dependable dispatch for workshop and laboratory needs. For clarifications on suitability, integration or additional technical specifications, technical advice is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930; this support complements the product’s practical advantages and helps secure uninterrupted operation in professional environments. Contact Metav Werkzeuge for tailored advice and secure supply of the Euromex LaboPad-WiFi 4 from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: LP.5000-WiFi-4 Label: LaboPad-WiFi 4 – Tabletkamera SKU: LP.5000-WiFi-4 Model series: LaboPad Product type: Digital camera / digital microscope Manufacturer: Euromex Data UID: LP.5000-WiFi-4 Special features WiFi-enabled tablet camera Designed for digital microscopy workflows Compact design suitable for bench and classroom use FAQ What does the WiFi function enable with this tablet camera? The WiFi function allows the LaboPad-WiFi 4 to stream live images wirelessly to compatible tablets, enabling immediate viewing, capture and sharing without a permanent cable connection. Is the LaboPad-WiFi 4 suitable for classroom demonstrations? Yes, the Euromex tablet camera is designed for classroom and bench use, offering a compact form and tablet-based interface that supports demonstrations and group viewing. Can the LaboPad-WiFi 4 be used for routine laboratory documentation? The camera is intended for routine documentation tasks, where wireless image transfer and tablet integration simplify record keeping and repeatable capture workflows. How does the LaboPad-WiFi 4 integrate with existing tablet devices? Integration is achieved via the device’s WiFi capability; the tablet serves as the live view and control interface, which reduces peripheral requirements and streamlines operation. Who supplies and supports the LaboPad-WiFi 4 for European customers? Metav Werkzeuge supplies and supports the LaboPad-WiFi 4 with logistics and advisory services from Emmerich, Germany. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
Lambda/4 Retardation Plate Slide For Polarisation Attachment Without Incident Light - Euromex
Take advantage of precise optical control and the convenience of a slide-mounted retarder to improve polarisation microscopy workflows; the quarter-wave element and slider format together offer consistent retardation and fast insertion. Order the Euromex Lambda/4 slider directly via Metav Werkzeuge or ask our consultants if needed. Lambda/4 retardation plate in slider – Polarisation accessory by Euromex (IS.9612) The Lambda/4 retardation plate in slider is a quarter-wave optical retarder designed for polarisation microscopy attachments and intended for use without reflected-light illumination, offering controlled phase shift for birefringent samples. Quarter-wave retardation for polarised light Slide-mounted for quick insertion and removal Designed for polarisation attachments without incident light Euromex optical quality and consistency Precise phase control to enhance polarisation contrast The quarter-wave element provides a defined phase shift between orthogonal polarisation components, enabling improved visualisation of birefringent structures and subtle anisotropies. Because the component is a true quarter-wave retarder, the optical path difference is tailored to introduce approximately π/2 radians of retardation at its design wavelength, which translates into clearer interference colours and enhanced contrast when used within a polarisation setup. This targeted control supports reproducible results in material inspection and routine polarised-light observations. Practical slider format for fast, reproducible operation The slider mount simplifies handling and repeatable positioning: the retarder is held in a compact carrier that slides into the polariser attachment, reducing alignment time and minimising handling-induced variation. Such a format supports efficient laboratory workflows where frequent insertion and removal are required, and it preserves the optical surface from unnecessary contact. The mechanical convenience reduces downtime between observations and contributes to a consistent optical path for successive measurements. Integration with polarisation attachments without reflected light Specified for use with polarisation attachments that operate without reflected-light illumination, the element is intended for transmitted-light polarising systems. The design permits straightforward integration into existing polariser/analyser arrangements, improving specimen contrast without altering illumination geometry. Where available optical ports accept slide-style inserts, this accessory provides a compact way to add quarter-wave retardation without complex reconfiguration of the microscope assembly. Handling, care and quality considerations Routine maintenance is limited to careful cleaning of optical surfaces with appropriate solvents and lint-free wipes; the slider format assists in protecting the retarder when not in use. Manufactured under Euromex quality standards, this accessory is supplied as an optical component for laboratory use and should be stored flat and dust-free. If clarification is needed regarding compatibility with a particular polariser attachment or microscope model, Metav’s product specialists can advise on fit and optical suitability. For tailored compatibility checks or to arrange supply through Metav Werkzeuge in Emmerich, please contact info@metav-werkzeuge.com or call +49 2822 7131930 to request assistance and ordering information. Technical Data Article number: IS.9612 UID: IS.9612 Label: Lambda/4 retardation plate in slider for polarisation attachment without reflected-light illumination Product type: Filter / Polarisation accessory Manufacturer: Euromex Core specifications No numerical specifications provided in the source data Special features Quarter-wave retardation (λ/4) Slider-mounted format for polarisation attachments Intended for use without reflected-light illumination Euromex optical accessory FAQ What optical effect does a quarter-wave plate produce? A quarter-wave plate introduces a phase shift of approximately 90° between orthogonal polarisation components; the Euromex Lambda/4 retardation plate (IS.9612) is designed to produce this effect for improved birefringence contrast. Can the slider be used in reflected-light polarising setups? The accessory is specified for use without reflected-light illumination, so it is intended primarily for transmitted-light polarisation attachments rather than reflected-light configurations. Is this retarder compatible with standard polariser carriers? Compatibility depends on the mechanical dimensions of the polariser attachment; the product is supplied in a slide-mounted carrier to fit slide-style polarisation ports—confirm fit with Metav Werkzeuge if carrier dimensions are critical. How should the optical surface be cleaned and stored? Clean with a lint-free wipe and appropriate optical solvent; store the slider flat and dust-free in its protective holder to preserve optical performance of the Euromex retarder. Does this product alter illumination intensity? The Lambda/4 element changes the phase relationship between polarisations rather than acting as a neutral density element; any perceived intensity change arises from polarisation-dependent transmission in the optical train rather than from absorption by the retarder. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland; info@euromex.com
Lambda/4 Retarder Slide for Reflected Light Polarisation Attachment, 185mm - Euromex
Take advantage of precise polarisation control and simple integration for consistent inspection results; the robust slider format enables quick insertion and reproducible optical alignment. Order the Lambda/4 retardation plate directly via Metav Werkzeuge or ask our consultants if detailed compatibility data is required. Lambda/4 Retardation Plate in Slider IS.9612-R — Polarisation accessory for incident-light microscopy by Euromex The Lambda/4 Retardation Plate in Slider IS.9612-R is a compact polarisation accessory for incident-light microscopy, designed to slot into polariser attachments to modify the phase of reflected light and enhance contrast in inspection and imaging tasks Quarter-wave retardation plate (λ/4) for polarisation Slider format for quick mounting in polariser slot Suited for incident-light illumination setups Compatible with Euromex polarisation attachments Improved contrast and glare suppression for reflected surfaces The quarter-wave element converts linear polarisation into circular polarisation or shifts the phase relationship between orthogonal components, which results in measurable contrast enhancement when inspecting reflective or birefringent specimens. As a passive optical component, the retardation plate requires no power and delivers a stable, maintenance-light improvement to image clarity. The result is more reliable defect detection and clearer structural detail on polished metals, coated surfaces and other materials observed under incident light. Fast installation and reproducible alignment to speed workflows The slider format enables rapid insertion into a polariser or accessory slot, reducing changeover times during routine inspections or laboratory workflows. The compact slider design supports consistent repositioning, which improves repeatability between measurements and reduces calibration overhead. This makes the accessory well suited to production-control stations and research benches where minimal downtime and predictable optical performance are priorities. Low-maintenance, durable optics that support precise polarisation control As a passive, purely optical component, the element avoids moving optics or electronics, lowering the risk of failure and simplifying inventory management for microscopy teams. The accessory provides precise phase control without requiring complex adjustment, thereby supporting consistent imaging results and reducing the need for corrective rework. Integration with established polarisation attachments from the same equipment family ensures practical compatibility and straightforward stocking for workshops and labs. Contact Metav Werkzeuge for tailored advice on integrating this Euromex quarter-wave slider into existing polarisation setups or to confirm fitment with specific polariser attachments Technical Data Article number: IS.9612-R Manufacturer: Euromex Microscopen bv Product type: Filter / Polarisation accessory UID: IS.9612-R Facts No numerical specifications provided Special features Quarter-wave retardation plate (λ/4) Slider format for polariser slot Designed for incident-light illumination Passive optical element, no power required FAQ What optical effect does a quarter-wave plate produce? A quarter-wave plate introduces a 90° phase shift between orthogonal polarisation components; the Lambda/4 retardation plate in slider form from Euromex converts linear to circular polarisation or alters phase to enhance contrast under incident-light conditions. Can the slider be used with any polariser attachment? Compatibility depends on the attachment's slot dimensions and mounting standard; the Euromex slider is designed for polarisation attachments that accept standard accessory sliders, ensuring practical integration with many incident-light systems. Does the accessory require maintenance or calibration? The component is passive and low-maintenance; routine cleaning of optical surfaces is recommended to preserve the Lambda/4 plate's performance during inspections. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
Large Ergonomic LED Stand With Head Holder For DZ-Series, LED Lighting - Euromex
The combination of a large ergonomic LED stand, an integrated head holder and direct DZ-series compatibility provides stable support and efficient positioning for inspection and documentation tasks; order the stand directly via Metav Werkzeuge or ask our consultants if needed. Large ergonomic LED stand with head holder for DZ-series — Stand / Holder, Euromex The Large ergonomic LED stand with head holder for DZ-series is a stable support solution offering ergonomic handling and precise mounting for inspection and imaging tasks in laboratory and workshop settings Large ergonomic design for comfortable handling Integrated head holder for secure mounting Compatible with DZ-series instruments Comfortable handling for longer inspection sessions The large ergonomic construction reduces the need for repeated manual adjustments and supports sustained use without rapid operator fatigue. Built to give stable support, the stand keeps the instrument orientation consistent during inspection routines, which improves repeatability. The presence of LED illumination on the stand offers steady, low-heat lighting that maintains a clear visual field for documentation and measurement tasks, while the overall design promotes controlled, efficient workflows across quality control and research applications. Secure mounting that maintains alignment and repeatability A dedicated head holder secures DZ-series heads and similar attachments, preventing undesired movement during precise operations. The mounting interface is designed for reliable fixation so focus and framing remain constant between shots or observations; this contributes to faster setup times and fewer rechecks. Compatibility with the DZ-series ensures that instruments fit without modification, enabling standardised use in production or laboratory environments where consistent alignment is required. Integration into workshop and laboratory routines The stand is intended as a practical addition to inspection benches, offering a balance of ergonomics and functional stability that supports day-to-day tasks. Simple, robust construction means the unit can be incorporated alongside existing inspection equipment and accessories; cross-selling references indicate complementary items for expanded capability. Where documentation, sample handling or repetitive inspection is part of the workflow, the stand reduces handling time and contributes to a more organised, reliable process. Contact Metav Werkzeuge for specialist advice on integrating the Euromex DZ-series stand into the workstation and securing the best configuration for precision inspection. Technical Data Article number: DZ.5040 Manufacturer: Euromex Product type: Stand / Holder Model series: DZ-series UID: DZ.5040 Facts No numeric specifications provided Special features Illumination: LED Head holder for secure mounting Compatibility: DZ-series Cross-selling: DZ.9040; DZ.9047; SL.5520 Design focus: large ergonomic stand FAQ What instruments are compatible with this stand? The stand is compatible with DZ-series heads and instruments; the head holder secures the attachment for stable inspection. Does the product include illumination? Yes, the stand is described with LED illumination to provide steady, low-heat lighting for visual tasks. How does the head holder affect repeatability? The head holder provides a secure fixing point so alignment is maintained between sessions, which supports repeatable inspection results. What is the article number and who is the manufacturer? Article number DZ.5040; manufacturer Euromex (Euromex Microscopen bv). Are there recommended accessories for extended use? Complementary items are referenced by cross-selling codes DZ.9040, DZ.9047 and SL.5520 for extended functionality and compatibility. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
LE.5239 Accessory Component - Euromex
Take advantage of a genuine Euromex accessory that brings reliable fitment and consistent quality to microscopy workflows; the combination of OEM-grade compatibility and a clear article reference ensures straightforward procurement and minimal integration uncertainty. Order the component via Metav Werkzeuge or consult the Metav team for tailored advice. LE.5239 — Euromex accessory / component for microscopy equipment LE.5239 is an accessory component for microscopy and metrology equipment that serves as a standard replacement or integration part within laboratory workflows Euromex accessory component Article number LE.5239 For microscopy and metrology use Streamlined reliability for measurement workflows This accessory is designed to support steady operation in laboratory and inspection environments by offering consistent fit and dependable behaviour when installed into compatible systems. Where original parts matter, the use of a manufacturer-matched component reduces the risk of alignment deviation and unexpected recalibration. The result is an improvement in process stability, with fewer interruptions to measurement routines and a clearer traceability chain for maintenance regimes. Simplified integration with existing systems As a component classified for microscopy and metrology applications, the part facilitates straightforward replacement and integration into established setups. Clear article identification and OEM alignment mean technicians can match inventories and reorder with confidence, reducing administrative friction. The emphasis on compatibility and simple identification contributes to faster turnaround times for service tasks and keeps laboratory throughput predictable. Why original accessories protect uptime and quality Choosing a branded component supports long-term equipment performance by aligning with the original design intent and tolerances. This reduces the need for workarounds or makeshift repairs that can compromise results. In addition to operational benefits, sourcing a recognised accessory supports quality assurance processes and audit trails, reinforcing a professional approach to asset management and maintenance documentation across the workshop or laboratory. For procurement or technical guidance on Euromex components such as LE.5239, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for reliable supply and expert advice Technical data Article number: LE.5239 Label: LE.5239 Product type: Accessory / Component Manufacturer: Euromex Core data No measurable technical data provided Materials and features Accessory for microscopy and metrology applications OEM accessory classification Prepared for integration with Euromex systems FAQ What is the main purpose of this accessory? This component is intended as an accessory for microscopy and metrology equipment and serves as a standard replacement or integration part within laboratory workflows. Is LE.5239 compatible with other Euromex models? Compatibility is indicated through the OEM classification; LE.5239 has been produced for use with Euromex systems and intended for straightforward integration where matching accessories are specified. How is the part identified for reordering? The article number LE.5239 and the label designation can be used to identify and reorder the accessory reliably for stock management. Can the component affect measurement accuracy? Using an OEM accessory helps maintain the original equipment tolerances and contributes to process stability and measurement repeatability when fitted correctly. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
LED Replacement for Incident Light Illumination for DZ.5040 - Euromex
Restore reliable reflected lighting with a genuine Euromex LED replacement that fits the DZ.5040 and reinstates original illumination performance; benefit from authentic spare parts and central supply via Metav Werkzeuge for straightforward procurement and compatibility advice. LED replacement for reflected illumination for DZ.5040 — Accessory / Component by Euromex LED replacement for reflected illumination for DZ.5040 is a genuine accessory component intended to replace the reflected-light illumination module on the DZ.5040 microscope, restoring original lighting capability with an authentic Euromex part. Genuine Euromex LED replacement for reflected light Compatible with DZ.5040 microscope models Accessory component for routine maintenance and spares Restore reliable illumination for precision inspection A genuine LED replacement for reflected illumination ensures the DZ.5040 returns to its intended lighting configuration when the original module requires renewal. The replacement unit is supplied as an authorised Euromex accessory and therefore supports consistent visual conditions for inspection tasks. By choosing the correct spare part, the optical system can continue to provide stable illumination for routine observation and documented inspections, helping to maintain operational continuity in the laboratory or workshop. Maintain measurement integrity with original parts Using an original accessory contributes to the long-term precision of inspection workflows. Metav operates as a dedicated reseller and quality filter for the European market; stocking an authorised replacement component reduces the risk of incompatibility and unplanned downtime. Metav Werkzeuge’s established range and procurement channels support efficient replenishment of genuine parts, which aligns with best-practice maintenance and keeps instrument behaviour predictable during quality checks. Ensure tidy integration into existing microscope setups The accessory is specified for the reflected-light stage of the DZ.5040 and therefore matches the mechanical and optical interfaces of that model. As a replacement component, the module is intended for direct substitution into the matched illumination housing, preserving the original alignment of the lighting beam and the microscope’s optical path. Compatibility with the DZ.5040 simplifies stock management for workshops that rely on a single microscope platform and prefer genuine parts for lifecycle consistency. Dependable availability and parts clarity from a specialist supplier Spare components such as this Euromex LED are offered with clear identification to aid ordering and inventory control: the article is listed under SKU SL.5520 and cross-referenced to DZ.5040. Sourcing through an experienced distributor means access to verified spare listings and documentation, reducing procurement errors and supporting continuity in maintenance planning. For complex installations or unusual configurations, refer to the original equipment documentation to confirm suitability before fitting. Contact Metav Werkzeuge today for genuine Euromex LED spares and compatibility advice for DZ.5040 — our consultants will advise on replacement components and stock availability Technical data Article number: SL.5520 Designation: LED replacement for reflected illumination for DZ.5040 Product type: Accessory / Component Brand: Euromex Cross reference: DZ.5040 Facts No numerical specifications provided Special features Replacement LED module Compatible with reflected illumination stage Accessory / component for DZ.5040 Genuine Euromex part FAQ What is the SL.5520? The SL.5520 is a genuine Euromex LED replacement for reflected illumination, supplied as an accessory/component for the DZ.5040 microscope. Is this LED compatible with DZ.5040 models? Yes. The replacement is specified for the DZ.5040 and intended to restore the microscope’s reflected-light illumination stage. Can the accessory be used with other microscope models? SL.5520 is produced for the DZ.5040; compatibility with other microscope models is not specified and should be confirmed against the other model’s illumination specification before fitting. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
LED Ring Light for UltraZoom Stereomicroscope 270W, LED Illumination - Euromex
Combine LED efficiency with direct compatibility for consistent, shadow-free observation; improve inspection throughput with a compact ring light and order via Metav Werkzeuge or consult our specialists for tailored advice. LED ring light for UltraZoom stereomicroscope — Ring light by Euromex An LED ring light for UltraZoom stereomicroscope that provides focused, circular illumination for stereo microscopy and visual inspection in laboratories and workshops. LED illumination for even lighting Designed for UltraZoom stereomicroscopes Slim ring design for minimal obstruction Reliable brand: Euromex Improve visual clarity with dedicated LED illumination A purpose-built LED ring light supplies uniform illumination around the optical axis, reducing shadows and enhancing surface detail under a stereo microscope. For manual inspection and assembly tasks, evenly distributed light helps to reveal texture, burrs and surface defects more reliably than off-axis lamps. The circular emitter integrates with the optical path so that the illumination angle complements stereo viewing, improving perceived contrast without altering focus or magnification. Optical compatibility that supports reproducible results Compatibility with the UltraZoom stereomicroscope ensures a stable optical setup and predictable lighting geometry, which is important for repeatable inspections and documentation. Consistent lighting reduces the need for frequent readjustment and simplifies image acquisition workflows, whether for visual checks or photodocumentation. The ring arrangement delivers even radial light that enhances stereo imaging by keeping both channels similarly lit, aiding depth perception and measurement reliability. Practical advantages for workshops and educational labs Compact form and LED technology typically mean low maintenance and long operational life, helping to keep downtime to a minimum and total cost of ownership predictable. The unobtrusive ring form preserves workspace around the specimen, which is useful for handling small components during inspection or repair. Supplied under the Euromex name, the accessory is a straightforward way to upgrade existing stereo setups with improved lighting quality, making routine quality checks and close visual work less fatiguing and more efficient. For fast supply and expert guidance on this Euromex LED ring light (SKU LE.1979), contact Metav Werkzeuge in Emmerich for advice tailored to workshop or lab requirements via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LE.1979 Product: LED ring light for UltraZoom stereomicroscope Brand: Euromex Type: Ring light UID: LE.1979 Facts No numerical technical data provided Special features LED illumination Designed for UltraZoom stereomicroscopes Ring design for even lighting FAQ What is the LE.1979 LED ring light? The LE.1979 is an LED ring light designed for use with the UltraZoom stereomicroscope; it provides circular, shadow-reducing illumination for inspection and observation tasks. How does a ring light improve microscopy? A ring light delivers uniform illumination around the optical axis, reducing directional shadows and improving surface detail and contrast during stereo inspection, which aids visual assessment and documentation. Is the light suitable for photomicrography? Yes, the even radial lighting from this ring light supports consistent exposure and contrast for photographic recording using a stereo microscope setup. Will this ring light fit other microscope models? The accessory is specified for UltraZoom stereomicroscopes; compatibility with other models depends on mechanical mounting and optical geometry and should be verified before purchase. Who manufactures this ring light? This ring light is produced by Euromex and is supplied under the model reference LE.1979 for the UltraZoom stereo series. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
Lens Cleaning Kit 5-Piece Including Cleaning Fluid, Lint-Free Cloth, Brush, Air Blower And Swabs - Euromex
Take advantage of the combination of a specially formulated lens cleaning fluid, lint-free cloths and precision accessories for fast, scratch-free maintenance of optical equipment. Order the lens cleaning kit directly via Metav Werkzeuge or ask the consultants for tailored advice. Lens cleaning kit — Cleaning set with fluid, lint‑free cloth and precision tools by Euromex A compact cleaning set that supplies the essential consumables and tools for safe, scratch‑free maintenance of optical surfaces in workshops and laboratories. Gentle lens cleaning fluid Lint-free cloth and paper Precision brush for dust removal Air blower for contaminant-free drying Cotton swabs for crevice cleaning Preserve coatings and prevent scratches with professional cleaning fluid The lens cleaning fluid included in the set dissolves oils and light grime without attacking delicate coatings; combined with a lint‑free cloth, this reduces the risk of abrasive particles causing micro‑scratches. The chemical formulation is designed for optical use and evaporates rapidly to support quick drying of optical surfaces, which minimises downtime between inspections. By using dedicated consumables rather than improvised solutions, the risk of residue and streaking is significantly lowered, supporting consistent measurement and imaging quality. Remove particles gently and avoid damage during maintenance A precision brush and air blower are supplied to eliminate loose debris before any wet cleaning step, which is essential to avoid dragging abrasive particles across glass. The included swabs allow controlled application of cleaning fluid in small or recessed areas, helping maintain seals and apertures without over‑wetting instruments. This staged approach—blow, brush, then wipe—keeps service intervals short and reduces the likelihood of repairable damage, supporting efficient workshop workflows and protecting valuable equipment. Compact kit for routine care and rapid readiness The set is arranged for quick access during routine inspections, making it straightforward to integrate into standard maintenance schedules for cameras, microscopes, binoculars and other precision optics. The packaging groups complementary items so that cleaning steps proceed logically and safely, encouraging consistent practice across teams and shifts. This cleaning set supports both preventive maintenance and ad‑hoc cleaning needs, ensuring instruments remain ready for accurate measurements and clear imaging. Order the Euromex lens cleaning kit PB.5275 through Metav Werkzeuge in Emmerich or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for specification advice and ordering assistance Technical data Article number: PB.5275 Product type: Cleaning kit Manufacturer: Euromex Facts Items included: 5 Contents / Features Lens cleaning fluid Lint‑free lens cloth / paper Brush Air blower Cotton swabs FAQ What is included in the cleaning kit? The kit contains lens cleaning fluid, a lint‑free lens cloth/paper, a brush, an air blower and cotton swabs as listed for PB.5275. Is the cleaning fluid safe for coated optics? Yes, the cleaning fluid in this Euromex cleaning set is formulated for coated optical surfaces and evaporates quickly to minimise residue. Can this kit be used on camera lenses and microscopes? The set is suitable for cameras, microscopes and other precision optics; the staged cleaning tools help protect delicate components during maintenance. Are the cloths reusable? The lint‑free cloths are intended for multiple uses provided they remain free of grit; replace if fibres, grit or residues are present to avoid abrasion. How should the kit be stored between uses? Store the items in a clean, dry area away from dust and extreme temperatures; keep the fluid sealed when not in use to preserve its effectiveness. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
MacroZoom MZ.46000 Digital Macro Camera Single Zoom, Digital - Euromex
Take advantage of digital imaging and a single zoom workflow for reliable inspection results; order the MacroZoom MZ.46000 directly via Metav Werkzeuge or ask our consultants if additional information is required. MacroZoom MZ.46000 — digital camera / digital microscope with single zoom, Euromex A MacroZoom MZ.46000 digital microscope designed for visual inspection and documentation in laboratory and workshop environments Digital imaging for precise visual documentation MacroZoom series with single zoom function Suitable for laboratory and inspection tasks Euromex quality and industrial design Faster, repeatable visual documentation for inspection workflows The combination of digital imaging and a simple single zoom control enables efficient capture of surface details and assembly checks without complex optical setups. Image files produced by the camera support traceability and archival of inspection results, so documentation becomes a verifiable part of quality control. The straightforward magnification adjustment reduces set-up time and helps maintain consistent framing across repeated measurements, which benefits production sampling and quality audits. Integration into existing inspection routines to save time Designed to fit inspection benches and microscopic workstations, this camera simplifies routine checks and visual reporting. The compact imaging device supports quick comparison tasks and rapid capture for defect analysis, making it suitable where throughput and clarity matter. If further technical specifications are required to confirm integration with a lab’s imaging chain or analysis software, supplementary data can be provided on request via info@metav-werkzeuge.com or by telephone at +49 2822 7131930. Confidence in sourcing and long-term availability Sourcing from a recognised optics manufacturer ensures consistent build quality; pairing the imaging unit with an established distributor provides reliable stock and logistics. Metav stands for the democratisation of precision and offers industrial customers a central supply point with a broad product range and documented service processes. This combination supports stable procurement for workshops and specialist departments that depend on continuous availability and dependable performance. Secure the MacroZoom MZ.46000 through Metav Werkzeuge for dependable inspection imaging and request tailored advice from our consultants at Metav Werkzeuge for workflow integration Technical Data Article number: MZ.46000 SKU: MZ.46000 Product type: Digital camera / digital microscope Model series: MacroZoom Manufacturer: Euromex Facts No numerical data available Special features Single zoom function Digital imaging capability MacroZoom series design FAQ What is the MacroZoom MZ.46000 best used for? The MacroZoom MZ.46000 by Euromex is intended for visual inspection, documentation and routine imaging tasks in laboratory and workshop environments How does the single zoom function help during inspections? The single zoom function provides a straightforward way to adjust magnification, enabling rapid framing and repeatable views for consistent visual comparison with minimal re‑calibration Can images from this digital microscope be used for reporting? Images captured with this digital camera are suitable for inclusion in inspection reports and visual records, supporting traceability and documentation needs Is the device designed for industrial or laboratory settings? This MacroZoom model is designed with inspection and laboratory tasks in mind, combining a compact form factor with imaging features suitable for routine quality checks Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands, info@euromex.com
Matt 25mm Slide Filter Polarisation Accessory - Euromex
Take advantage of the combination of a matt surface, a practical slider mount and proven Euromex manufacturing to secure consistent optical performance in routine microscopy and polarisation workflows; order the part directly via Metav Werkzeuge or consult the technical advisors for compatibility questions. Matt filter in slider »AI.9726« — Filter / Polarisation accessory by Euromex The Matt filter in slider offers controlled diffusion for transmitted-light and polarisation setups, presented as a compact filter element in a ready-to-fit slider format for standard microscope filter holders. Matt surface for uniform light diffusion Slider mount for quick insertion and exchange Compatible with polarisation accessory sets Robust optical part for routine use Improved image homogeneity from a matt diffuser A matt diffuser evens out irregularities in the illumination and reduces hotspots, which results in more consistent contrast and improved image interpretation for documentation and inspection. The matt finish reduces specular reflections in the optical path, supporting delicate polarisation applications and transmitted-light examinations. This leads to reliable, repeatable imaging where subtle sample detail must be assessed. Practical slider mount for efficient workflows The slider format simplifies handling in busy laboratory or workshop environments: the filter can be changed quickly and secured in a dedicated holder without additional tools, ensuring reproducible positioning in the optical train. The compact holder format supports straightforward integration into existing filter packs and polarisation accessory rails, shortening set-up time and enhancing process throughput for routine tasks. Designed for everyday use and system compatibility Manufactured by Euromex, this filter is intended as a durable component for microscopes and polarisation systems used in education, light microscopy inspection and routine quality control. The simple design emphasises trouble-free operation and long service life under normal laboratory conditions, providing a practical optical accessory that complements an instrument inventory maintained for daily inspection duties. Contact Metav Werkzeuge today for ordering and compatibility guidance on Euromex optical accessories — reach us at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert support. Technical data Article number: AI.9726 SKU: AI.9726 Item label: Mattiert Filter in Schieber Product type: Filter / Polarisation accessory Manufacturer: Euromex Facts No numerical data provided Special features Matt finish (diffuser) Slider-mounted filter element Intended for polarisation and transmitted-light use Brand: Euromex FAQ What is the primary effect of a matt filter in microscopy? A matt filter introduces diffuse illumination, reducing hotspots and specular reflections so that the matt filter in the slider AI.9726 supports clearer contrast and more consistent imaging in polarisation and transmitted-light setups. Can the slider-mounted filter be used with polarisation accessory sets? Yes, the element is specified as a polarisation accessory and the slider format allows integration alongside other polarising components within standard filter holder systems. Is the product suitable for routine laboratory inspection? The matt filter in the slider AI.9726, manufactured by Euromex, is designed for routine use and offers robust optical performance appropriate for everyday inspection and teaching applications. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com