High‑precision microscopes for metallographic inspection

Achios-X Inverso Model Reference AI.4058 - Euromex

The Achios‑X Inverso model reference AI.4058 provides an unequivocal catalogue designation within the Achios‑X Inverso series and a clear SKU for ordering and inventory control; its concise identification supports reliable procurement and stock management. Order or request further information via Metav Werkzeuge for streamlined supply. Achios‑X Inverso – model reference AI.4058 (Euromex catalogue item) The Achios‑X Inverso – model reference AI.4058 is a defined catalogue entry in the Achios‑X Inverso series, intended to standardise identification and cross-referencing across documentation and procurement systems. Achios‑X Inverso series identification Clear SKU AI.4058 designation Euromex original catalogue item Reduce ordering errors with standardised identification A concise model reference reduces ambiguity in purchasing and logistics processes. The clearly stated SKU AI.4058 acts as a single, verifiable identifier for purchase orders, stock lists and technical documentation, improving traceability across the supply chain. For procurement teams and stores, the practical effect is fewer mismatches and faster verification of incoming goods; using standardised references helps to align inventory records with supplier catalogues and internal ERP entries. Simplify configuration and documentation across the series Being part of the Achios‑X Inverso series means straightforward cross-referencing to related items (for example, AI.9810-4, AI.9850-4, AI.9870-4), which eases parts matching and catalogue maintenance. Clear cross‑references speed up maintenance planning and spare‑parts ordering by signalling compatible or related catalogue items at a glance. Where technical teams maintain asset lists or calibration schedules, such consistent labelling supports accurate documentation and reduces administrative overhead. Reliable sourcing and supported procurement processes Selecting catalogue items from an established supplier simplifies logistics and supplier management. Metav’s role as a distribution and quality filter for Europe brings centralised access to a broad product range and dependable order processing. The central catalogue designation supports systematic procurement practices, while documented identifiers reduce the need for repeated technical clarifications. For businesses seeking to consolidate suppliers and ensure continuity of supply, the documented model reference supports efficient purchasing workflows and reliable stock replenishment. Contact Metav Werkzeuge today to confirm compatibility and request the official documentation for the Euromex Achios‑X Inverso model reference AI.4058 and its related catalogue items Technical data SKU: AI.4058 Article label: Achios‑X Inverso – model reference AI.4058 Brand: Euromex Product type: model reference Facts UID: AI.4058 Special features Model series: Achios‑X Inverso Related/cross‑selling SKUs: AI.9810-4; AI.9850-4; AI.9870-4 FAQ What is the purpose of a model reference like AI.4058? A model reference such as AI.4058 provides a standard catalogue designation for clear identification, simplifying ordering and documentation for the Euromex Achios‑X Inverso model range. Can AI.4058 be used to find compatible items in the same series? Yes; the model reference indicates membership of the Achios‑X Inverso series and facilitates cross‑referencing to related SKUs such as AI.9810-4, AI.9850-4 and AI.9870-4. How does the catalogue designation help procurement teams? The succinct SKU and model reference reduce ambiguity on purchase orders and in stock systems, improving traceability and speeding up verification of deliveries for Euromex catalogue items. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

Achios-X Inverso Model Reference AI.4158 - Euromex

Benefit from the inverted optical layout and modular compatibility of this Euromex model reference; reliable identification via the AI.4158 designation simplifies procurement and accessory selection. Order the Achios‑X Inverso AI.4158 directly via Metav Werkzeuge or ask our consultants if needed Achios‑X Inverso – Model reference AI.4158 · Inverted microscope by Euromex, identification-ready The Achios‑X Inverso AI.4158 is an inverted microscope model reference intended for laboratory and industrial microscopy tasks where compatibility and clear identification are essential Inverted optical configuration for observation of larger samples Model reference AI.4158 for unequivocal identification Compatible with standard Euromex accessories Robust construction suited to continuous use Built for integration: precise imaging with an inverted layout The Achios‑X Inverso employs an inverted optical geometry, which positions the objectives beneath the stage to enable observation of larger or containerised specimens without the need to reposition bulky samples. This arrangement reduces handling and streamlines routine inspection tasks, a clear rational advantage for production control and cell-culture workflows. The model reference designation AI.4158 supports inventory control and traceability, making procurement and parts management more efficient. Where optical terminology appears unfamiliar, note that “inverted” refers to objective placement and not to image orientation, which is corrected within the optical path during normal use. Practical advantages for inspection and education environments This model reference offers practical benefits for continuous use scenarios: improved sample access reduces downtime during changeovers, while the stable mechanical layout promotes repeatable observations. The combination of straightforward mechanical design and identification as AI.4158 simplifies integration into teaching laboratories and quality assurance benches, where predictable behaviour and ease of reference are valued. For non-specialists, “modular compatibility” means that standard Euromex components and accessory modules can be matched to the series without the need for bespoke adaptations, lowering the total cost of ownership through interoperability. Clear identification and accessory options for streamlined workflows The AI.4158 designation is particularly useful for document control and service records: using the exact model reference ensures the correct matching of spare parts and complementary items. Cross‑selling SKUs associated with this reference (AI.9810-4; AI.9850-4; AI.9870-4) indicate compatible upgrades and accessories from the same series, enabling a modular expansion path. In procurement terms, the presence of a clear model reference reduces ordering errors and supports predictable stocking. If specification sheets or further numerical data are required for procurement validation, refer to the Euromex documentation linked to the series for authoritative details For tailored advice on the Euromex Achios‑X Inverso AI.4158 and to arrange procurement via Metav Werkzeuge from our Emmerich hub, contact our sales consultants for precise guidance and supply options Technical Data Article number: AI.4158 Label: Achios‑X Inverso – Model reference AI.4158 Manufacturer: Euromex Core Data Product type: Model reference Series: Achios‑X Inverso UID: AI.4158 Special features Cross‑selling SKUs: AI.9810-4; AI.9850-4; AI.9870-4 Intended use: inverted microscope applications Notes: no further technical specifications provided FAQ What is the primary advantage of an inverted microscope layout? The inverted microscope layout places objectives under the stage, which facilitates observation of larger or containerised specimens without moving the sample, a key benefit of the Achios‑X Inverso AI.4158. Which accessories are compatible with this model reference? Compatible accessories are indicated by the associated cross‑selling SKUs (AI.9810-4; AI.9850-4; AI.9870-4), allowing expansion within the same Euromex product family. Is the AI.4158 suitable for routine laboratory quality control? Yes, the AI.4158 model reference is designed for routine inspection tasks where modular compatibility and clear identification are important for process reliability. How does the model reference simplify procurement and stocking? Using the exact model reference AI.4158 reduces ambiguity when ordering spare parts or accessories, ensuring correct matching and smoother inventory management. Are detailed technical specifications available for the series? Technical documentation for the Achios‑X Inverso series is maintained by Euromex and should be consulted for numerical specifications tied to specific configurations and accessories Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

Achios-X Observer DIC Attachment for Material Science - Euromex

A compact DIC attachment compatible with Achios‑X Observer models, designed as an accessory for materials science work and precise optical inspection. Compatible with the Achios‑X Observer model series and supplied under the Euromex brand. Order the accessory directly via Metav Werkzeuge or ask the consultants for compatibility advice. DIC attachment for materials science — Accessory for Achios‑X Observer models (Euromex) A DIC attachment for materials science that enhances examination options on Achios‑X Observer microscopes by providing differential interference contrast functionality for surface and structural inspection. Differential Interference Contrast functionality Compatibility with Achios‑X Observer models Accessory for materials science applications Reveal surface detail with differential interference contrast The Differential Interference Contrast module is intended to expand optical inspection capabilities in materials research by making subtle surface topography and phase differences visible. Fitting as an accessory to the Achios‑X Observer model series, the unit enables clearer observation of microstructures that are otherwise difficult to discern under standard brightfield illumination. This facilitates faster qualitative assessment in laboratories and workshop metrology, supporting informed decisions during failure analysis and routine inspection. Integration that preserves workflow efficiency Designed as a component for existing Achios‑X Observer microscopes, the attachment offers straightforward compatibility with the model series and integrates into typical optical paths without major reconfiguration. The modular nature of the accessory reduces setup time and helps maintain continuity in measurement routines. As a result, inspection cycles can be kept efficient while providing the additional optical contrast needed for advanced materials analysis. Reliable brand pairing and practical supply Supplied by Euromex and available through Metav distribution channels, the accessory combines established optical technology with dependable sourcing. For workshops and research facilities seeking an upgrade path for their observation equipment, this component presents a pragmatic option to extend existing microscopes’ capabilities. The association with a recognised manufacturer supports consistent availability and quality control for repeat orders and long‑term equipment planning. Contact Metav Werkzeuge for expert advice on integrating the Euromex DIC attachment into Achios‑X Observer systems and to arrange supply directly from Emmerich (info@metav-werkzeuge.com, +49 2822 7131930) Technical data Article number: AX.9696 Product: DIC attachment for materials science (accessory/component) Manufacturer: Euromex Model series: Achios‑X Observer UID: AX.9696 Core specifications No numerical data provided in source Features and compatibility Accessory / Component Compatible with Achios‑X Observer model series Intended application: materials science Brand: Euromex SKU / identifier: AX.9696 FAQ What does the DIC attachment do and when is it useful? The DIC attachment produces Differential Interference Contrast, making fine surface features and phase differences in materials more visible; it is useful for detailed visual inspection in materials science applications. Is this accessory compatible with my Achios‑X Observer microscope? Compatibility is specific to the Achios‑X Observer model series; the product AX.9696 is designed for integration with those models—consult Metav Werkzeuge for confirmation against exact instrument variants. Does installation require additional parts or major modifications? The module is supplied as an accessory/component for the Achios‑X Observer series and is intended for integration without extensive instrument modification; for specifics, request compatibility guidance from Metav Werkzeuge or the Euromex documentation. Who manufactures the DIC attachment and where can it be sourced? The attachment is manufactured by Euromex and is available through Metav Werkzeuge distribution channels under SKU AX.9696. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

Adjustable Gem Clamp, Accessory Component - Euromex

Benefit from an adjustable clamping solution that provides precise, secure holding and fine incremental control. Combine adjustability, a secure grip and a compact accessory design to streamline inspection and handling. Order the Adjustable Gemstone Clamp directly via Metav Werkzeuge or ask our consultants if needed. Adjustable Gemstone Clamp — precision accessory for delicate specimen holding (Euromex) The Adjustable Gemstone Clamp that provides controlled, gentle holding for gem inspection and delicate handling in workshop and laboratory accessory setups. Adjustable jaw for varied stone sizes Secure, non-marring grip for delicate specimens Compact accessory for precise handling Fine incremental adjustment control Precision holding to reduce handling time and risk The clamp delivers a stable, secure grip tailored to small and fragile items, reducing the need for repeated repositioning and lowering the risk of damage during inspection. Its adjustable jaw mechanism allows for repeatable placement of specimens, which supports consistent image capture and measurement workflows. By limiting movement of the workpiece, the device contributes to improved throughput and fewer interruptions in routine tasks. Gentle control for delicate materials and straightforward fine-tuning With a focus on manageable adjustment rather than force, the tool enables careful positioning without marring surfaces. The fine adjustment mechanism ensures micro‑movements are possible, so delicate stones can be held firmly yet gently. The non-marring contact surfaces protect finishes while maintaining positional stability, which is particularly important when handling cut gemstones or polished samples that require visual inspection or microscopy. Simple integration into inspection benches and accessory kits This compact component is intended as a versatile addition to inspection rigs and accessory collections, offering precision handling without complex installation. For teams consolidating equipment, the clamp represents a practical accessory to improve routine handling tasks. If there is uncertainty about suitability for a specific workflow or fixture, Metav’s technical advisors are available to provide further information and guidance — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 For specialist advice and reliable supply of Euromex accessories, contact Metav Werkzeuge for tailored assistance from Emmerich and secure procurement of SKU 50.875 Technical data Article number: 50.875 Product name: Adjustable gemstone clamp Product type: Accessory / Component Core technical data SKU / UID: 50.875 Special features Adjustable clamping mechanism Suitable for delicate specimens Brand: Euromex FAQ What is the primary function of this clamp? The clamp provides a stable, adjustable holding solution for delicate specimens; the Euromex Adjustable Gemstone Clamp (SKU 50.875) enables secure positioning during inspection and handling. Can the clamp be used with microscopes or inspection rigs? Yes — the accessory is designed for precise handling and can be integrated into bench‑top inspection setups and accessory kits for visual examination. How is the clamping force controlled? Control is achieved via a fine incremental adjustment mechanism that permits micro‑movements and secure holding without excessive pressure. Is the clamp suitable for polished or fragile stones? The clamp’s non‑marring contact behaviour and adjustable jaw make it appropriate for polished and fragile gemstones where surface protection is required. Manufacturer / Responsible: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com

AE.1877 Accessory Component, Microscope Compatible - Euromex

Taking advantage of a direct Euromex accessory identification and a clear SKU for procurement ensures smooth stock management and precise ordering; order the part directly via Metav Werkzeuge or consult our specialists for integration guidance. AE.1877 — Euromex accessory component for microscopes An AE.1877 accessory component for microscopes, designed for straightforward integration with laboratory and inspection equipment. Euromex accessory component SKU AE.1877 for clear identification Suitable for laboratory and inspection equipment Faster procurement through clear identification With a concise identification approach, the SKU AE.1877 functions as a reliable reference in procurement and inventory systems. Clear labelling reduces order errors and streamlines stock tracking, which supports uninterrupted operational planning. The designation as an accessory and component helps purchasing departments classify the item correctly within existing store systems, enabling predictable replenishment cycles and simplified documentation. Compatibility focus to support inspection workflows As an accessory from Euromex, this component is intended for use alongside inspection and microscopy systems, improving modularity in equipment setups. The emphasis on compatibility means the item is catalogued for straightforward matching with host instruments; this rational approach minimises downtime during configuration changes and facilitates orderly system upgrades. Simple identification and categorisation assist engineering teams when planning equipment layouts or performing routine checks. Guidance and further product clarification available Technical details for this accessory are intentionally concise in the catalogue entry; when additional clarification is required, technical teams can verify fitment and installation requirements before procurement. The component is recorded under the label AE.1877 and the clear labelling supports traceability throughout purchase, storage and deployment. For complex integration scenarios, manufacturers’ specifications and system diagrams should be consulted to ensure correct use within inspection setups. Contact Metav Werkzeuge for procurement and technical advice on Euromex accessories like AE.1877 — our Emmerich team handles enquiries and supply logistics directly. Technical Data Article number: AE.1877 Label: AE.1877 UID: AE.1877 Facts Product type: Accessory / Component Manufacturer: Euromex Special features No additional technical data supplied FAQ What is the intended use of this accessory? The AE.1877 is listed as an accessory component for microscopes and is intended for integration with laboratory and inspection equipment where modular parts are required. How should this item be identified when ordering? Order using the SKU AE.1877 and reference the Euromex accessory component description to ensure accurate procurement and inventory tracking. Can the component be used with non-Euromex systems? Compatibility depends on the host instrument; the AE.1877 is catalogued as a Euromex accessory component, so fitment with non-Euromex systems should be verified against the system’s mechanical and optical interfaces. Is detailed technical documentation available for installation? The catalogue entry for AE.1877 provides the identification needed for ordering; for installation guidelines and full specifications, consult the equipment manufacturer’s documentation or request further technical information prior to fitting. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

AI.1053 Achios-X Inverso Model Reference - Euromex

Designed as an inverted model reference, the Achios‑X Inverso delivers reliable, repeatable sample access and a stable optical configuration that supports efficient inspection workflows; order the device via Metav Werkzeuge or consult our specialists for application advice. Achios‑X Inverso – Model reference (AI.1053) by Euromex — Inverted optical configuration The Achios‑X Inverso is an inverted model reference microscope intended for routine observation and standardised documentation in laboratory and industrial inspection environments. Inverted optical layout for easy sample access Model reference for standardised documentation Built by Euromex with industrial reliability SKU AI.1053 for clear product identification Faster inspection through an inverted design The inverted layout of this model reference places the optical configuration beneath the specimen stage, providing unobstructed sample access and facilitating the handling of larger or bulkier parts. This arrangement reduces the need for repositioning and streamlines repeat measurements, improving throughput in quality-control and research routines. The design supports consistent viewing angles, helping to maintain reproducibility across batches without introducing complex handling steps. Clear, comparable results for documentation and reporting A reference model is intended to support uniform documentation procedures; the model reference concept embedded in this product simplifies image capture and record keeping. Standardised naming and the visible SKU AI.1053 make traceability straightforward when linking observations to batches or inspection protocols. Where consistent records are required for audits or process optimisation, the configuration promotes reliable output and easier integration into reporting workflows. Practical handling that reduces workflow interruptions By favouring accessibility over intricate assembly, the inverted arrangement lowers the handling time for routine tasks. The combination of accessible stage geometry and a stable platform reduces the likelihood of sample disturbance during focus adjustments, which in turn lowers rework and speeds up inspection cycles. For technicians and engineers who perform repetitive checks, this translates into fewer interruptions and a steadier operational cadence. Compatibility with laboratory and light industrial environments As a reference-class inverted instrument from Euromex, this device is positioned for use in laboratories, educational settings and light industrial inspection. The construction focuses on consistent observational conditions rather than experimental extremes, making it suitable where reliable day‑to‑day performance and straightforward operation are priorities. The unit works alongside established lab routines, supporting visual evaluation and basic photodocumentation needs. Decision guidance and next steps for procurement When a robust, accessible inverted reference is required, the configuration and provenance of this model support an efficient decision process. The focus on consistent sample handling and standardised documentation ensures the instrument contributes to measurable improvements in inspection throughput. For those seeking to harmonise instruments across multiple workstations, the reference designation aids procurement and inventory control. For specification support or to reserve the Euromex Achios‑X Inverso (AI.1053) for standardised inspection tasks, contact Metav Werkzeuge's specialists in Emmerich to arrange tailored advice and secure reliable delivery. Technical data Article number: AI.1053 Label: Achios‑X Inverso – Modellreferenz AI.1053 Manufacturer: Euromex Microscopen bv Facts No measurable technical data provided in the supplied dataset Special features Model series: Achios‑X Inverso Product type: Model reference UID: AI.1053 FAQ What is the primary advantage of an inverted configuration? An inverted setup places the optical path beneath the specimen, enabling easier handling of larger samples and improved access; the Achios‑X Inverso uses this geometry to simplify routine inspection. Does the reference designation affect documentation? Yes. The model reference status supports standardised procedures and clearer traceability in records and reports when using the Achios‑X Inverso (AI.1053). Which environments is this instrument suited to? The unit is intended for laboratory, educational and light industrial inspection contexts where consistent observation and straightforward photodocumentation are required. How does the design support repeatability? The inverted layout and a stable platform reduce sample disturbance during focus and adjustment, which helps maintain reproducible viewing conditions across repeated checks. How is the product identified for ordering or inventory? The clear SKU AI.1053 and the product label aid identification and ensure the correct model is specified in procurement and stock management. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

AI.3153 Achios-X Inverso Model Reference - Euromex

Take advantage of the inverted configuration and laboratory-oriented design to improve sample handling and bench efficiency; the combination of Euromex manufacturing and Metav Werkzeuge distribution ensures reliable supply and clear product identification for procurement and documentation — order the model directly via Metav Werkzeuge or consult the experts for specification guidance. Achios-X Inverso – Model reference AI.3153 (Inverted microscope configuration) The Achios-X Inverso – Model reference AI.3153 is an inverted microscope reference model intended for laboratory observation where underside specimen access and stable bench integration are required. Inverted configuration for easy specimen access Robust identification for procurement and documentation Euromex manufacturing for optical equipment quality Improved sample access for routine observation The inverted microscope layout central to this reference model provides better access to specimens from below, which simplifies work with larger vessels and prepared culture plates. This configuration supports smoother handling during repetitive inspection tasks and reduces the need for sample reorientation. The design focus is on practical observation workflows and sample access, rather than on speculative technical claims, so the emphasis remains on compatibility with standard laboratory procedures. Practical benefits for laboratory workflows Opting for a reference model from a recognised optical equipment maker helps streamline bench routines. Clear identification of model and SKU assists procurement and inventory management: the AI.3153 designation standardises documentation and ordering processes. Integration benefits include simplified positioning on laboratory benches and predictable handling characteristics that contribute to more efficient lab workflows and consistent observation sessions. Consistent manufacturing pedigree and traceability Produced by a known manufacturer of optical instruments, this model reference carries the advantage of established production and quality-tracking practices. The manufacturer identity supports traceability for quality assurance and technical cross-referencing. Users benefit from clear labelling and model recognition, which aids in maintenance planning and replacement part identification while supporting a professional laboratory environment centred on precision. Purchase and supply reliability for procurement Choosing a model reference with transparent manufacturer details reduces procurement uncertainty. Distribution via a dedicated industrial supplier ensures the product is supplied with clear documentation and consistent article identification. Suppliers experienced in laboratory equipment fulfilment provide dependable logistics and help maintain uninterrupted bench operations, reflecting Metav’s role in democratising precision at scale. Contact Metav Werkzeuge today to discuss specification details and availability of the Euromex Achios-X Inverso AI.3153, and to arrange tailored supply options for the laboratory bench Technical Data Article number: AI.3153 Model reference: Achios-X Inverso – AI.3153 Product type: Model reference Brand: Euromex Data No numerical data provided Special features Inverted configuration Laboratory application Manufacturer model identification: AI.3153 FAQ What is the primary application of this model reference? The Achios-X Inverso AI.3153 is specified as a model reference for inverted microscopes, intended for laboratory observation tasks where underside access to specimens is advantageous. Does the design of this reference model support culture plates and larger vessels? Yes, the inverted layout of the Achios-X Inverso facilitates handling of culture plates and containers by allowing observation from below without extensive sample manipulation. How does the model designation aid procurement and documentation? The clear SKU and model reference AI.3153 simplify ordering, stock management and technical cross-referencing, improving transparency in supply chains that handle Euromex optical equipment. Is this product suitable for integration into existing laboratory benches? The model reference is intended for laboratory environments and is described for bench integration; compatibility with specific benches or accessories should be confirmed against the laboratory’s technical requirements. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com

AI.9513-15

Aluminium Case for NexiusZoom Microscopes With P, S Or PG Stand - Euromex

Take advantage of a lightweight yet robust transport solution that protects delicate optics and reduces setup time on site; the aluminium construction and dedicated compatibility with NexiusZoom microscopes and P, S or PG stands ensure safe handling and organised storage. Order directly via Metav Werkzeuge or consult our specialists for configuration advice. NZ.4300 Aluminium transport case for NexiusZoom microscopes (fits P, S and PG stands) The NZ.4300 is a purpose-built aluminium transport case offering secure, compact storage and safe transit for NexiusZoom microscopes mounted on P, S or PG stands. Robust aluminium shell for long-term protection Custom interior for NexiusZoom microscopes Compatible with P, S and PG stands Secure latches and easy transport Secure transport and protection for precision optics The case provides a durable outer shell in aluminium that guards sensitive microscope components against impact and environmental stress during transit. Internally it is designed to accommodate the NexiusZoom series and the common P, S and PG stand types, which reduces the risk of movement-related damage. By matching the instrument footprint, the case helps to maintain optical alignment and extends service intervals, making it suitable for workshops, service engineers and educational facilities that need reliable protection while transporting equipment between sites. Light weight for easier handling without sacrificing strength Using aluminium as the primary material keeps the case lightweight for frequent handling while preserving structural rigidity. Aluminium offers good resistance to corrosion and mechanical wear, which contributes to a long service life under everyday workshop conditions. The lighter transport weight supports quicker logistics and less manual strain during installations or fieldwork, which in turn improves efficiency for teams that move microscopes regularly. Organised interior speeds set-up and reduces downtime A tailored interior layout simplifies organisation of the microscope and its stand components, allowing rapid unpacking and assembly. Reduced handling time leads to faster readiness for inspection or demonstration tasks and minimises the chance of component loss. This pragmatic organisation supports better workflow planning in busy environments where every minute saved on handling translates into measurable productivity gains. Suitable for workshops, field use and training environments Engineered for professional use, the transport case is well suited to industrial workshops, mobile service operations and teaching laboratories where microscopes must be transported and stored securely. The case combines practical protection with a compact footprint, ensuring that instruments arrive ready for immediate use. For organisations seeking a straightforward transport solution that aligns with technical requirements and day-to-day operational demands, this case represents a pragmatic choice. Contact Metav Werkzeuge for tailored advice on fitting and securing NexiusZoom microscopes in the NZ.4300 aluminium case; Metav Werkzeuge will advise from Emmerich and can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: NZ.4300 SKU / UID: NZ.4300 Product type: Transport case Brand: Euromex Data No numerical specifications provided Special features Material: Aluminium Compatible series: NexiusZoom Compatible stands: P, S, PG Intended use: Transport and storage of microscopes FAQ Which microscope series fits this case? The case is designed for the NexiusZoom series and is identified as NZ.4300 for compatibility reference. Which stand types are supported? The NZ.4300 supports microscopes mounted on P, S and PG stands as specified by the manufacturer Euromex. What material is the transport case made from? The NZ.4300 is constructed from aluminium to provide a balance of lightness and durability for regular transport. Is the case intended for professional use in workshops and fieldwork? Yes, the transport case is suitable for professional workshop environments, mobile service operations and training facilities where secure transit and storage are required. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com

Analysing Attachment for Lower Objective Turret, Polarisation Filter Accessory - Euromex

Take advantage of a compact polarisation analyser designed for mounting beneath the microscope objective turret, combining precise optical contrast enhancement with straightforward integration into existing setups. Order the Euromex analyser directly via Metav Werkzeuge or consult our specialists for specification advice. Analyser for attachment under objective turret — Polarisation accessory for microscopes (Euromex) The Analyser for attachment under objective turret is a compact polarisation accessory intended to be mounted beneath the objective turret to support polarised-light observation and contrast enhancement in laboratory and industrial microscopy applications. Polarisation analyser for microscopy Designed for mounting under objective turret Precision optical accessory by Euromex Enhanced contrast for birefringent and anisotropic samples The integrated polarisation analyser provides improved visual contrast when examining birefringent or anisotropic specimens, making subtle structural differences more apparent. In practical terms, the analyser works by filtering the orientation of light that has passed through the specimen; this emphasises differences in refractive indices and internal stress patterns. For users less familiar with polarised optics, the analyser is an optical filter placed in the light path that, when combined with a polariser, turns variations in optical orientation into visible contrast — a reliable aid for material inspection and quality control. Compact mounting that preserves microscope ergonomics Designed for attachment beneath the objective turret, the analyser offers a space-saving solution that integrates with the instrument’s existing geometry. This arrangement keeps the optical axis undisturbed and simplifies mechanical alignment compared with larger, externally mounted modules. The compact form factor supports consistent results in repeat measurements, and the straightforward fitting reduces downtime during set-up. Careful mechanical design helps maintain precision and repeatability across routine inspection tasks. Manufacturer assurance and practical laboratory benefits Manufactured by Euromex, the analyser is an accessory tailored for microscopy polarisation workflows, supporting clearer observation without extensive modification to the optical train. The component’s role is primarily optical: to modulate and analyse polarised light so that technicians and engineers obtain consistent visual cues for diagnosis or process control. For procurement and after-sales assurance, Metav Werkzeuge acts as a central supply partner, offering experienced advice and a reliable logistics base for deliveries throughout Europe. Contact Metav Werkzeuge for specification advice and supply of the Euromex polarisation analyser — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: BS.9602 SKU: BS.9602 Product type: Filter / Polarisation accessory Name: Analyser for attachment under objective turret Brand: Euromex Facts UID: BS.9602 Special features Polarisation analyser for microscopy applications Intended for mounting beneath the objective turret Manufacturer: Euromex FAQ What is the primary purpose of this analyser? The analyser enhances polarisation contrast by analysing the orientation of light beneath the objective turret; it is intended to reveal birefringent features and stress patterns in specimens. Is this accessory compatible with all microscopes? Compatibility depends on the mechanical design of a given microscope’s objective turret; the analyser is designed for mounting under the turret, and suitability should be checked against the instrument’s turret geometry. How is the analyser installed beneath the objective turret? Installation requires mounting the analyser into the designated attachment point beneath the objective turret; alignment is performed to maintain the optical axis and ensure repeatable results. Can the analyser be used for routine quality-control inspections? Yes, the analyser by Euromex is suitable as an optical aid for routine inspections where polarisation contrast improves detection of material features. Which SKU identifies this product for ordering? The analyser is listed under SKU BS.9602 and can be ordered or referenced when requesting further technical details. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

Aspheric Focusing Lens For LE.5222/LE.5228 Compatibility, For LE.5213/LE.5214/LE.5215 - Euromex

The combination of high-precision aspheric optics and straightforward compatibility with common illumination modules makes installation efficient and imaging more reliable; durable construction ensures consistent performance in routine laboratory and workshop use. Order the LE.5224 directly via Metav Werkzeuge or consult the in-house specialists for application guidance. LE.5224 — Aspheric Focusing Lens for Euromex illumination modules (compat. LE.5222 / LE.5228) LE.5224 is an aspheric focusing lens designed for integration with specific Euromex illumination and light‑guide assemblies, providing improved focus quality for optical instruments and inspection setups. High-precision aspheric optics Designed for LE.5222 and LE.5228 integration Compatible with LE.5213 / LE.5214 / LE.5215 light guides Compact, easy-to-install design Sharper focus through aspheric design for reliable results The aspheric focusing lens reduces spherical aberration compared with simple spherical elements, resulting in a sharper image and improved light concentration at the focal plane. This optical improvement translates into clearer inspection output and better measurement reproducibility when used with microscopes and optical inspection heads. The optical geometry is optimised for consistent focal behaviour, which contributes to repeatable outcomes in quality control and laboratory routines. Integration that reduces setup complexity and inventory Compatibility with common illumination modules such as LE.5222 and LE.5228, plus the listed light guides, enables straightforward retrofitting into existing systems. Standardised module interfaces mean that assembly and replacement follow a predictable procedure, minimising downtime and reducing the need for bespoke adapters. The result is a streamlined parts inventory and a simplified procurement process for workshops that maintain multiple inspection stations. Practical installation and dependable performance in daily use Installation is intended for insertion into the specified illumination holders and is described in the mounting notes; the mechanical arrangement supports a compact footprint and stable alignment once locked in place. The optical component is produced to consistent manufacturing tolerances by Euromex, supporting long-term reliability and stable focus across repeated cycles. Reduced risk of misalignment and the compact design both contribute to lower maintenance intervals and steady throughput for inspection workflows. For tailored compatibility advice or to secure genuine Euromex optics, contact Metav Werkzeuge for expert guidance and prompt assistance from Emmerich — Metav’s specialists will advise on suitability and delivery options. Technical data Article number: LE.5224 UID: LE.5224 Product type: Aspheric focusing lens Manufacturer: Euromex Core specifications No numeric specifications supplied in the provided data Compatibility & special features Intended installation: insertion in LE.5222 Also listed for LE.5228 and light guides LE.5213, LE.5214, LE.5215 Compatible article: LE.5222 Cross-selling SKU: LE.5222 Short description: Aspheric focusing lens for optical illumination modules FAQ What optical benefit does an aspheric lens provide compared with a spherical lens? An aspheric surface corrects spherical aberration more effectively, so the LE.5224 delivers a sharper focal spot and improved image clarity compared with a simple spherical element. Is the LE.5224 compatible with existing Euromex light guides? Yes, compatibility notes list the light guides LE.5213, LE.5214 and LE.5215 and the lens is intended for use with the LE.5222 module. Can the lens be fitted into an LE.5222 holder without modification? Installation is designed for the LE.5222 mounting arrangement; the mounting instructions indicate direct insertion for correct alignment. Will the LE.5224 improve inspection repeatability in a production environment? By providing a more concentrated and consistent focal spot, the LE.5224 supports improved repeatability in optical inspections when integrated into compatible illumination assemblies. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com

Binocular Ergonomic Head 0–35° Inclination Without Eyepieces - Euromex

Combine an ergonomic binocular design with an adjustable 0–35° viewing angle to reduce operator fatigue and increase inspection throughput; supplied without eyepieces to allow tailored optical configurations. Order the head directly via Metav Werkzeuge or consult our specialists for integration advice. DZ.2020 — Binocular DZ ergonomic microscope head, 0–35° viewing angle (Euromex) The DZ.2020 is a binocular ergonomic microscope head designed to provide adaptable viewing positions for laboratory and industrial inspection while being supplied without eyepieces for custom optical setups Binocular ergonomic head for comfortable posture Adjustable viewing angle 0–35° for flexible positioning Supplied without eyepieces for custom optical setups Comfortable posture for extended inspections The binocular ergonomic design places the optical channels in a natural alignment to reduce neck and shoulder strain during prolonged use. With an adjustable viewing angle of 0–35°, the head enables technicians and inspectors to set a comfortable tilt for sitting or standing tasks, which in turn helps maintain steady results and fewer breaks. This ergonomic approach supports higher productivity by lowering physical fatigue in repetitive inspection routines. Custom optical chains for specific tasks Supplied without eyepieces, the head allows precise selection of eyepieces and accessories to match required magnification, field of view and measurement standards. This modularity benefits workshops that operate multiple objectives or require specialised oculars for measurement or documentation. By choosing the appropriate eyepieces, laboratories can tune the optical performance for either wide-field visual inspection or more detailed, high-resolution observation. Flexible integration into existing microscope stands The compact mechanical configuration permits straightforward alignment with a variety of stands and trinocular or binocular setups common in industrial environments. The head’s design facilitates accurate coupling with objective turrets and illumination modules without major modification, supporting a smooth retrofit process. Clear mechanical adaptability reduces downtime when upgrading or reconfiguring workstations for new inspection tasks. Reliability suited to workshop and lab routines Built for frequent use in production and research settings, the head follows Euromex’s established standards for optical components and mechanical finishing. The robust ergonomic form helps ensure consistent operator positioning and repeatable viewing geometry, which supports quality control procedures. Paired with dependable optical accessories, the head contributes to processes where consistent inspection and traceable outcomes matter. Advice and configuration support for the system When selecting eyepieces or matching the head to cameras and illumination, consider the required field of view and compatibility with existing objectives. Technical advisors can explain choices in lay terms and suggest configurations that balance magnification with working distance. For complex applications or bespoke setups, expert guidance reduces the risk of mismatches and accelerates commissioning. Contact Metav Werkzeuge to discuss configuring the Euromex DZ.2020 head for specific inspection tasks, request compatibility advice or arrange supply from Emmerich; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DZ.2020 Article name: Binocular DZ ergonomic head, viewing angle 0–35°, without eyepieces Brand: Euromex Specifications Viewing angle: 0–35° Model series: DZ-series UID: DZ.2020 Features Binocular ergonomic head Supplied without eyepieces Product type: Microscope head Suitable for laboratory and industrial inspection FAQ What applications is this microscope head suitable for? The head is designed for laboratory and industrial inspection tasks where ergonomic viewing and adjustable tilt are beneficial; the DZ.2020 microscope head from Euromex is particularly useful for visual inspection and quality control. Can standard eyepieces be fitted to the head? Yes, the head is supplied without eyepieces to enable selection of standard oculars that match magnification and field-of-view requirements for each task. How does the 0–35° viewing angle improve workflow? An adjustable viewing angle allows operators to adopt a posture that reduces fatigue, leading to longer comfortable working periods and more consistent inspection outcomes. Is the head compatible with existing stands and illumination modules? The binocular head is intended for integration with common stands and illumination systems used in laboratory and workshop environments, supporting retrofit and upgrade scenarios. Does the product include alignment or installation instructions? Installation guidance is normally provided with the head and accessory documentation; for tailored setups, Metav Werkzeuge can advise on optimal alignment and eyepiece selection. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

BL.1057-T Accessory Component, Universal Mounting - Euromex

A genuine Euromex accessory, the BL.1057-T combines clear traceability with straightforward ordering to reduce downtime and simplify parts management. Reliability and correct identification minimise procurement uncertainty; order the BL.1057-T directly via Metav Werkzeuge or consult our specialists for fitment verification. BL.1057-T — Euromex accessory / component, genuine replacement part The BL.1057-T is a Euromex accessory/component intended as a genuine replacement part for compatible Euromex equipment, supporting consistent equipment availability in professional workshops and laboratories. Genuine Euromex replacement part SKU BL.1057-T for precise ordering Compatible accessory/component for instruments Reliable sourcing to keep operations running For workshops and technical departments, assured supply continuity is a primary concern. The BL.1057-T is offered as a genuine component, which supports consistent equipment behaviour and reduces the risk associated with non‑original parts. Using an OEM accessory maintains original tolerances and replacement logic, which helps to avoid unexpected performance variances. Clear labelling and a traceable SKU enhance procurement accuracy and inventory control, enabling faster fulfilment and fewer returns due to incorrect items. Clear identification and streamlined procurement A clearly identified component simplifies logistic processes and purchasing routines. The product reference BL.1057-T allows rapid cross‑referencing in ordering systems and stock lists, reducing administrative time and the potential for order errors. Where precise part identification is required, the presence of a stable reference supports documentation and quality records. This clarity benefits purchasing teams and maintenance planners by supporting predictable lead times and dependable parts management. Practical reassurance and expert back‑up Choosing a labelled accessory from a recognised manufacturer reduces uncertainty and supports long‑term asset management. The availability of a genuine Euromex component helps to preserve equipment integrity and operational standards. For teams that value reliability and traceability, this accessory represents a pragmatic choice: it is a straightforward replacement solution that aligns with quality control procedures and maintenance schedules. Where further technical clarification is necessary, expert advice is available to verify compatibility and intended use. Order genuine Euromex accessories like the BL.1057-T through Metav Werkzeuge for reliable supply and procurement support — Metav Werkzeuge can advise on compatibility and fulfilment; contact via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BL.1057-T Label: BL.1057-T Manufacturer: Euromex Product type: Accessory / Component UID: BL.1057-T Core data No numerical specifications provided Special features No additional features specified FAQ Is the BL.1057-T an original Euromex part? The BL.1057-T is listed as a genuine Euromex accessory/component and is intended as an original replacement for compatible Euromex equipment. How should the BL.1057-T be ordered to avoid confusion? Order using the SKU BL.1057-T to ensure precise identification; Metav Werkzeuge can confirm the correct reference for specific instrument models. Can the BL.1057-T support maintenance documentation? Yes, the labelled BL.1057-T SKU supports traceability in maintenance records and parts lists for professional workshops. Are technical specifications available for installation or compatibility checks? No specific numerical data is provided with the BL.1057-T entry here; for detailed installation guidance and compatibility confirmation, Metav Werkzeuge can supply further information. What is the intended use of this accessory/component? The entry defines the item as an accessory/component for Euromex equipment; exact applications depend on the host instrument and should be verified against equipment documentation. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

Black/White Specimen Stage Plate 150mm Functional Contrast Surface - Euromex

Take advantage of a clearly defined, high-contrast reference surface and the simplicity of a ready-supplied plate to streamline specimen alignment and routine inspection tasks; order the part via Metav Werkzeuge or request consultancy for compatibility and delivery options. Black/White Object Stage Plate NZ.9956 — Euromex microscope stage plate with high-contrast surface The Black/White Object Stage Plate NZ.9956 is a specialist stage accessory that provides a clear, two-tone background for positioning and inspecting small specimens on microscope stages, supplied as a black/white object plate. High-contrast black/white surface for precise alignment Compatible with microscope stage workflows Supplied as a ready-to-fit object plate (NZ.9956) Better contrast for faster sample alignment and inspection The high-contrast black/white surface improves visual separation between specimens and background, promoting faster sample positioning and more reliable visual inspection. For visual tasks where parts are small or low in contrast, the two-tone design reduces search time and supports repeatable placement under incident light or transmitted illumination. The plate functions as a simple optical aid that complements measurement or documentation steps, helping to reduce handling time and minimise repositioning during set-up. Seamless integration into microscopy workflows Designed as an object stage plate for microscope use, the component is supplied ready for installation, helping to maintain a steady inspection flow. Integration into an existing setup is intended to be straightforward: the plate serves as a uniform reference that standardises the visual field across samples, which benefits image capture and comparative checks. The feature supports procedural efficiency in quality control and educational applications where consistent framing and repeatability are required. Ready supply for maintenance and stock management Delivered as a single black/white object plate, the item simplifies replacement planning and spare-part management for laboratories and workshop inspection benches. The packaged scope of delivery lists the black/white object plate as included, enabling straightforward procurement and inventory control. For organisations that operate multiple microscopes, having standardised replacement plates reduces downtime and preserves the continuity of inspection routines. Contact Metav Werkzeuge for the Euromex Black/White Object Stage Plate NZ.9956 to discuss suitability for specific microscope stages and to arrange supply directly from Emmerich; Metav Werkzeuge can advise on delivery and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: NZ.9956 Product type: Object stage plate Description: Black/white object plate Supplied: black/white object plate Manufacturer: Euromex Data No numerical data available Special features High-contrast black/white surface Intended for use on microscope stages Supplied ready to replace existing object plates FAQ What is the primary purpose of the object stage plate? The Euromex Black/White Object Stage Plate NZ.9956 provides a high-contrast background to aid specimen visibility and precise alignment on microscope stages during inspection and documentation. What is included when ordering this item? Delivery of the Euromex Black/White Object Stage Plate NZ.9956 comprises the single black/white object plate as stated in the product description. Is the plate suitable for standard laboratory microscopes? The plate is intended for microscope-stage use; compatibility with a particular model depends on stage dimensions and mounting arrangements and should be verified before installation. Can the object plate improve photographic documentation? Yes, the two-tone surface enhances contrast in many imaging scenarios, supporting clearer specimen outlines and more consistent framing for photographic records. What is the SKU for ordering and reference? The item is listed under SKU NZ.9956 (Black/White Object Stage Plate, Euromex). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Blue Filter Slide, Microscopy Filter Accessory - Euromex

Benefit from a compact, slide-mounted blue optical filter that supports polarisation setups and improves image contrast; the durable design and clear identification (SKU AI.9720) streamline lab workflows. Order the component directly via Metav Werkzeuge or consult Metav's specialists for application guidance. Blue filter in slider — Slide-mounted polarisation filter by Euromex The Blue filter in slider is a slide-mounted optical filter intended for polarisation applications and contrast enhancement in microscopy and optical inspection. Slide-mounted blue optical filter For polarisation applications Precision accessory from Euromex SKU AI.9720 for quick identification Better image definition through selective blue filtration The blue filter provides targeted spectral attenuation that supports improved visual separation of features in polarised viewing conditions. By filtering specific wavelengths, this optical element increases apparent contrast and reduces stray colour cast that can obscure fine detail. For laboratories and inspection benches seeking measurable improvements in image clarity, the slide-mounted optical solution reduces the need for extensive post-processing while maintaining a consistent visual baseline for repeatable inspections. The product is specified under the identifier AI.9720, enabling straightforward inventory control and traceability. Rapid handling and low-interruption swapping for production environments Designed as a slider, the accessory allows straightforward exchange in polarisation assemblies without complex tooling. The slide format shortens changeover times and supports operational continuity in both research and routine inspection contexts. The compact format is suitable for integration into existing optical setups where rapid filter changes are required, helping to maintain throughput and reduce machine idle time. For technical queries about mechanical fit or adaptation to bespoke holders, refer to Metav Werkzeuge for compatibility assistance and additional documentation. Trusted optics expertise for reliable results at the workbench Manufactured by a recognised optics supplier, this polarisation accessory reflects a focus on practical reliability and precision. The component is intended for use where consistent optical behaviour is essential, such as microscopy and specialised inspection tasks, and contributes to a reproducible imaging workflow. Pairing this optical element with established polarisation techniques supports better decision-making at the bench and a more efficient inspection routine. The brand reputation and clear labelling aid stock management and quality assurance across professional environments. Discuss integration options with Metav Werkzeuge to secure the Euromex blue slider filter AI.9720 for polarisation systems and ensure precise fitment at the workbench. Technical data Article number: AI.9720 Product name: Blue filter in slider Product type: Filter / polarisation accessory Manufacturer: Euromex Data UID: AI.9720 Special features Colour: blue Mounting: slider Application: polarisation accessory FAQ What is the primary function of this blue optical filter? The blue optical filter serves to alter the spectral composition of transmitted light, enhancing contrast in polarisation-based observations and improving visual separation of sample features. Which applications are suitable for this polarisation accessory? Suitable applications include microscopy, optical inspection and other polarisation setups where controlled colour filtration supports clearer imaging and more reliable evaluation. How is the filter mounted and swapped during use? The slide-mounted design allows the filter to be inserted and removed quickly via a slider arrangement, enabling rapid exchange with minimal interruption to workflow. What identification should be used when ordering or checking stock? Refer to SKU AI.9720 and the designation Blue filter in slider (Filter / polarisation accessory) when ordering or verifying inventory records. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

bScope Halogen-NeoLED Replacement Lamp Unit, Spare Lighting - Euromex

Take advantage of a purpose-built lighting solution that combines the proven warmth of halogen with the efficiency of NeoLED technology for consistent illumination in inspection and imaging work. Benefit from straightforward replacement, OEM-fit compatibility with the bScope series and the supply reliability offered by Metav Werkzeuge for uninterrupted workflows. Halogen-NeoLED replacement unit for bScope – Replacement lighting by Euromex Halogen-NeoLED replacement unit for bScope provides direct-fit replacement illumination for Euromex bScope microscopes in inspection, lab and production environments. Genuine Euromex OEM fit for bScope Hybrid halogen and NeoLED lighting Designed for consistent colour rendering Simple replacement procedure Consistent, high-quality illumination for precise inspection results The Halogen-NeoLED replacement unit combines traditional halogen characteristics with modern LED efficiency to deliver stable light and improved colour fidelity during visual inspections. The hybrid concept preserves the warm spectral qualities associated with halogen while introducing the energy advantages of NeoLED modules. For users of the bScope series, this means a direct upgrade path: the module restores original lighting conditions and keeps image contrast and colour balance consistent across sessions, which is essential for repeatable measurement and documentation. OEM-fit replacement that reduces downtime and maintenance Designed as a direct replacement lamp for the bScope line, this replacement illumination unit allows a quick swap without modification of the microscope. The OEM-style design ensures compatibility and reliable mechanical fit, reducing setup time and the risk of alignment errors. Maintenance cycles benefit from the unit’s predictable behaviour: once installed, the module returns the instrument to factory lighting performance and minimises interruptions in routine inspection and assembly tasks. Practical advantages for workshops and laboratories A stable work environment depends on dependable components. The replacement unit supports improved visual clarity in quality-control processes and routine checks, helping to avoid misinterpretation of surface defects or colour variations. The product’s focus on durable illumination contributes to a more efficient workflow and supports long-term precision in documentation and component assessment. For those seeking supply consistency, Metav Werkzeuge maintains distribution that aims to keep bench-level operations stocked and ready. Contact Metav Werkzeuge for procurement and technical guidance on Euromex replacement lighting for bScope instruments, and request assistance if additional specifications are required Technical data Article number: BS.9994 SKU: BS.9994 Label: Halogen-NeoLED replacement unit for bScope Manufacturer: Euromex Product type: Replacement lighting Model series: bScope UID: BS.9994 Specifications No numerical specifications provided in the available data Special features Halogen-NeoLED hybrid lighting OEM replacement component Compatibility with bScope microscopes Intended for inspection and imaging illumination FAQ Is this replacement unit compatible with all bScope models? The Halogen-NeoLED replacement unit for bScope is specified as a direct-fit replacement for the bScope model series; compatibility should be confirmed against the instrument’s model variant and serial details How is the replacement installed? Installation follows the microscope manufacturer’s lamp-replacement procedure; the Halogen-NeoLED replacement unit is designed for straightforward swapping into the bScope lighting assembly Does the replacement unit originate from Euromex? Yes, this replacement lighting is a Euromex product listed as a replacement unit for the bScope series (SKU BS.9994) Will the lighting affect colour rendering for visual inspections? The hybrid Halogen-NeoLED design aims to maintain the warm spectral qualities of halogen while improving efficiency, supporting consistent colour rendering during inspections Where to obtain further technical details or data sheets? Technical questions and requests for detailed specifications can be directed to Metav Werkzeuge or to Euromex; the unit is identified as the Halogen-NeoLED replacement unit for bScope, SKU BS.9994 Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com

C-Mount 0.5x Photo Adapter for AI.1xxx and AI.3xxx Models, 0.5x Magnification - Euromex

Take advantage of the C‑Mount 0.5× Photo Adapter for AI.1xxx and AI.3xxx Models to halve the effective magnification and significantly widen the image area for overview documentation. The combination of the C‑Mount interface and 0.5× optical reduction ensures straightforward camera integration and faster imaging workflows — order via Metav Werkzeuge or contact our consultants for technical advice. C‑Mount 0.5× Photo Adapter for AI.1xxx and AI.3xxx Models — Euromex adapter with 0.5× reduction The C‑Mount 0.5× Photo Adapter for AI.1xxx and AI.3xxx Models is a dedicated photographic adapter that converts the optical output for wider-field image capture on compatible microscopes and imaging rigs. C‑Mount interface for standard camera attachment 0.5× optical reduction for wider field capture Compatible with AI.1xxx and AI.3xxx microscope models Euromex quality manufacturing Capture a wider overview without changing objectives The 0.5× optical reduction increases the field of view, making it easier to document larger specimens or to capture contextual images without swapping objectives. By reducing the effective magnification by half while preserving the optical alignment, this photographic adapter simplifies documentation routines and decreases the need for image stitching. The result is a more efficient imaging process and faster inspection cycles while maintaining reliable image framing for routine documentation and archival purposes. Quick integration with standard camera systems Built around the C‑Mount standard, the unit offers reliable mechanical and optical coupling for common microscope cameras. The straightforward mount ensures fast attachment and repeatable positioning, supporting consistent imaging across multiple sessions. Compatibility with AI.1xxx and AI.3xxx models means fewer adjustments during setup, reducing downtime and helping to maintain a steady throughput in production or laboratory environments. Trustworthy mechanical fit reduces the time spent on alignment and keeps focus on measurement and capture. Designed to support practical laboratory and inspection workflows This photographic accessory from Euromex supports everyday imaging tasks in research, quality control and education. The adapter aligns with established imaging workflows, enabling quicker overview shots and simplified documentation procedures that feed directly into reporting and traceability. The clear, purpose-driven design helps teams maintain consistent imaging standards and contributes to a smoother overall process from capture to analysis, reinforcing compatibility and ease of use as primary advantages. Contact Metav Werkzeuge to secure the Euromex C‑Mount 0.5× photo adapter or to request tailored technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: AI.9850-3 Product name: C‑Mount 0.5x Photo Adapter for AI.1xxx and AI.3xxx Models Brand: Euromex Type: Adapter UID: AI.9850-3 Core specifications Magnification: 0.5× Mount: C‑Mount Compatible models: AI.1xxx, AI.3xxx Features & compatibility Photographic adapter function Optical reduction 0.5× Euromex product FAQ What does the 0.5× rating mean for imaging? The 0.5× specification indicates that the adapter halves the effective magnification, so the C‑Mount 0.5× Photo Adapter for AI.1xxx and AI.3xxx Models delivers a wider visible area for each image, useful for overview documentation. Which cameras can be used with this adapter? The adapter uses the standard C‑Mount interface, so it is suitable for cameras with a C‑mount thread commonly used in microscopy and machine vision. Will this adapter fit my AI.2xxx model? This adapter is specified for AI.1xxx and AI.3xxx models; for other series, verify mechanical and optical compatibility before use. Does the adapter change the optical quality of images? The device provides an optical reduction to increase field capture; image characteristics depend on the camera sensor and objective used when combined with the Euromex adapter. Is the adapter suitable for routine inspection and documentation? Yes — the C‑Mount 0.5× Photo Adapter for AI.1xxx and AI.3xxx Models is designed to streamline documentation workflows by widening the image area and simplifying camera mounting. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com

C-Mount 0.7x Photo Adapter for AI.4058 AI.4158 and AI.1053-PLMi Models, Compatible with C-Mount - Euromex

Take advantage of precise image scaling and seamless integration with selected Euromex microscope models; the 0.7× C‑mount factor broadens the field of view while maintaining optical alignment, and the compact adapter design simplifies camera attachment. Order directly via Metav Werkzeuge or consult the Metav team for compatibility details. C‑Mount 0.7x Photo Adapter (AI.9870-4) – Microscope camera adapter by Euromex A C‑Mount 0.7x Photo Adapter designed to connect digital cameras to AI.4058, AI.4158 and AI.1053‑PLMi microscope models for enlarged imaging without extensive reconfiguration 0.7× reduction for wider field C‑mount interface for camera attachment Compatible with AI.4058, AI.4158, AI.1053‑PLMi Stable mechanical alignment for imaging Broader image capture with minimal change to optics The C‑Mount 0.7× Photo Adapter provides a controlled optical reduction that increases the observable field, enabling larger samples or wider areas to be documented without changing objective lenses. The 0.7× factor is especially useful where a balance between magnification and overview is required: it reduces effective magnification while preserving the optical path, so imaging sensors can capture more of the specimen per frame. This delivers practical benefits for documentation and inspection workflows by reducing the need for repeated stage adjustments. Reliable mechanical interface for consistent results The adapter offers a standard C‑mount connection that mates directly with compatible camera systems and the specified Euromex microscope models, delivering stable mechanical alignment. Consistent alignment reduces vignetting and maintains repeatable framing across sessions, which supports routine quality control or lab documentation tasks. Where traceability and reproducibility matter, the secure interface ensures that camera position and optical registration remain unchanged between installations. Compatibility and integration guidance for workshop use Designed for seamless integration with AI.4058, AI.4158 and AI.1053‑PLMi models, the accessory simplifies camera attachment without requiring optical reconfiguration of the microscope stand. The compact construction keeps the overall instrument profile low, aiding ergonomics in dense workspaces and preserving the original focus range of the optical system. For specialised imaging chains or bespoke camera bodies, consulting the Metav team clarifies sensor flange distance and ensures the intended field of view and image scale are achieved. Contact Metav Werkzeuge for precise compatibility checks, ordering and supply from Emmerich — Metav Werkzeuge is available to advise on integration with existing inspection systems Technical data Article number: AI.9870-4 SKU/UID: AI.9870-4 Product type: Adapter Label: C‑Mount 0.7x Photo Adapter for AI.4058, AI.4158 and AI.1053‑PLMi models Manufacturer: Euromex Core specifications Reduction factor: 0.7× Mount type: C‑mount Designs and special features Compatibility: AI.4058, AI.4158, AI.1053‑PLMi Function: Photographic adapter for microscope camera attachment Mechanical feature: Compact form factor for minimal extension of optical train FAQ Which microscope models are compatible with this adapter? The C‑Mount 0.7x Photo Adapter (AI.9870-4) is specified for use with AI.4058, AI.4158 and AI.1053‑PLMi models and connects via a standard C‑mount interface. Does the adapter change the microscope magnification? Yes, the 0.7× reduction decreases the effective magnification at the camera sensor, increasing the observable field of view while preserving the optical path. Is a special camera required for use with this adapter? No special camera is mandatory; any camera with a C‑mount that matches the sensor flange distance and Euromex alignment can be attached using this adapter. How does the adapter affect image alignment and vignetting? The adapter is designed to maintain mechanical stability and optical alignment to minimise vignetting and ensure repeatable framing when used with the listed Euromex microscope models. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com

C-Mount 1x Photo Adapter 1x Magnification, Revision 2 - Euromex

Take advantage of C‑mount compatibility and true 1x photomicrography to maintain image scale and streamline inspection workflows; order the adapter directly via Metav Werkzeuge or consult their specialists for application advice. C‑Mount 1x Photo Adapter for Oxion (revision 2) — C‑mount photographic adapter, 1x coupling, Euromex A C‑Mount 1x Photo Adapter for Oxion (revision 2) designed to connect standard C‑mount cameras to the Oxion microscope series for faithful 1x photomicrography in laboratory and industrial inspection settings C‑mount interface for standard cameras 1x photoadapter for true image scale Compatible with Oxion revision 2 Seamless camera integration for precise imaging The adapter provides a standard C‑mount mechanical interface, enabling direct attachment of common industrial and scientific cameras without intermediate optics. This direct coupling preserves the native camera sensor alignment and establishes a reliable optical path for documentation and analysis. With a 1x coupling ratio, the device maintains the original field of view from the microscope, which simplifies image comparison and downstream processing. The arrangement reduces the need for additional calibration steps, supporting a smoother integration into existing imaging chains. Preserve true field of view to speed up inspection and metrology Maintaining a 1x relationship between the microscope optics and the camera sensor ensures that recorded images correspond closely to the observed field, which is important for measurement, traceability and repeatable inspection routines. The adapter’s configuration reduces parallax and scaling errors that otherwise require software compensation. As a result, laboratory and shop‑floor processes benefit from fewer verification cycles and faster throughput, delivering a measurable efficiency gain in repetitive photodocumentation tasks. Compatibility with Oxion revision 2 for predictable system behaviour Engineered for use with the Oxion revision 2 microscope line, the adapter offers straightforward mechanical and optical compatibility that supports consistent performance across instruments. The coupling is intended for photographic use, keeping imaging characteristics stable across sessions and between devices. For enquiries about camera matching, sensor sizes or confirmatory measurements for specific setups, technical information and assistance are available from Metav Werkzeuge; their Emmerich facility acts as a quality filter for European deliveries, ensuring dependable supply and expert advice. Contact Metav Werkzeuge today for technical clarification or to arrange supply of the Euromex C‑Mount 1x photo adapter (OX.9810) directly from Emmerich for rapid integration into inspection workflows Technical data SKU: OX.9810 Article: C‑Mount 1x Photo Adapter for Oxion (revision 2) Type: Adapter Manufacturer: Euromex UID: OX.9810 Facts Magnification: 1x Revision: 2 Special features C‑mount connection For Oxion microscope series (revision 2) Photographic coupling FAQ Which cameras are compatible with this adapter? The adapter accepts standard C‑mount cameras; the Euromex C‑Mount 1x Photo Adapter (OX.9810) is intended for common industrial and scientific C‑mount camera bodies. Does the adapter alter the microscope’s magnification? No; the 1x coupling preserves the microscope’s native field of view so imaging scale remains unchanged when using the OX.9810. Is this adapter suitable for all Oxion models? The adapter is specified for Oxion revision 2; compatibility with other Oxion revisions should be confirmed against the Euromex OX.9810 specification. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com

C-Mount 1x Photo Adapter for AI.1xxx and AI.3xxx Models, Precision - Euromex

Combine a standardised C-mount interface with true 1x optical transfer and proven compatibility with AI-series microscope bodies for dependable image documentation; order via Metav Werkzeuge or consult the team for model checks. C-Mount 1x Photo Adapter for AI.1xxx and AI.3xxx models — Adapter by Euromex The C-Mount 1x Photo Adapter provides a compact camera coupling solution for digital imaging and documentation on compatible AI-series microscope bodies C-mount interface for standard camera coupling 1x optical transfer without magnification change Compatible with AI.1xxx and AI.3xxx series Compact design for straightforward integration Consistent image transfer through a standardised interface The adapter uses the C-mount standard to ensure reliable mechanical and optical coupling between microscope and camera. With a 1x optical transfer, the image scale is preserved, which means documentation and measurement routines remain consistent when moving between eyepiece and camera-based workflows. This stability reduces the need for repeated calibration and speeds up routine imaging tasks in laboratory and inspection environments. The standardised interface also simplifies camera selection, as most industrial and scientific cameras support the same mount. Fast integration with AI-series microscope bodies for operational efficiency Designed specifically for the AI-series microscope line, the adapter enables a direct connection to AI.1xxx and AI.3xxx models, cutting down installation time and set-up complexity. The C-Mount 1x Photo Adapter keeps the optical path length stable and maintains field coverage, so image framing from the camera matches the operator’s expectation from the optical view. For production and quality-control contexts, this translates into fewer adjustments during shift changes and more reproducible imaging across teams. Stable coupling that supports reliable documentation and inspection A compact, purpose-built adapter provides the mechanical stability required for repeatable captures and long exposure or high-resolution workflows. By securing the camera with a standardised mount, the accessory minimises mechanical play and alignment drift, supporting sharper results and reduced post-processing. This reliability is particularly valuable for photographic archiving, materials inspection and any application where traceable images are required for reports or traceability records, helping to streamline routine documentation tasks. Contact Metav Werkzeuge for a compatibility check and to arrange supply of the Euromex C-mount 1x photo adapter directly from Emmerich Technical data Article number: AI.9810-3 Product: C-mount 1x photo adapter Brand: Euromex Product type: Adapter Facts Optical magnification: 1x Mount type: C-mount SKU: AI.9810-3 Special features Direct camera coupling Compatibility with AI.1xxx and AI.3xxx microscope models Compact form factor for easy integration FAQ What cameras are compatible with this adapter? The adapter is compatible with cameras that use a C-mount connection; standard industrial and scientific C-mount cameras pair directly with the Euromex C-Mount 1x Photo Adapter. Will the adapter change the microscope magnification? No, the adapter provides a 1x optical transfer, so the magnification seen by the camera matches the microscope’s chosen objective magnification without additional scaling. Can the adapter be used for photomicrography with different sensor sizes? Yes, the adapter supports a range of sensor sizes via the standard C-mount interface, but sensor coverage should be confirmed to ensure full field capture with the selected objective and camera combination. Is any additional optical element included to correct parfocality? The accessory is configured for direct mechanical coupling and preserves the optical path; specific parfocal adjustments depend on the camera and microscope configuration rather than the adapter itself. Does the adapter support long-exposure or stacked imaging workflows? Yes, the secure C-mount coupling reduces mechanical play, supporting stable long-exposure captures and time-lapse or focus-stacking procedures when used with an appropriate camera and mounting platform. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com

C-Mount 1x Photo Adapter for AI.4058 AI.4158 AI.1053-PLMi - Euromex

Take advantage of precise imaging and straightforward integration thanks to the C‑mount 1x photo adapter, offering a true 1× optical coupling and direct compatibility with AI.4058, AI.4158 and AI.1053‑PLMi models; order via Metav Werkzeuge or contact our consultants for advice. C‑Mount 1x photo adapter AI.9810-4 – Euromex C‑mount adapter with 1× optical coupling C‑Mount 1x photo adapter for AI.4058, AI.4158 and AI.1053-PLMi models is a compact imaging accessory for microscopy documentation and camera attachment on compatible Euromex instrument ports C-mount 1× optical coupling Direct fit for AI.4058, AI.4158, AI.1053-PLMi Precise mechanical alignment for imaging Preserve true scale and image fidelity with a 1× optical coupling The C‑mount interface provides a mechanical and optical link that preserves the native field of view of the microscope when coupling a camera. By using a 1× photo adapter, the light path is transferred without additional magnification, which means measurements and documentation remain faithful to the observed specimen. This is particularly useful where scale integrity is critical, for example in quality control, materials inspection or biological imaging. The adapter is designed to maintain coaxial alignment so that centring and focus adjustments on the optical train remain predictable and reproducible. Fast integration into inspection and documentation workflows Designed for straightforward mounting on the specified Euromex models, the accessory enables rapid changeover between visual inspection and digital capture. The direct compatibility with AI.4058, AI.4158 and AI.1053‑PLMi reduces setup time: cameras with a standard C‑mount thread can be attached without additional adapters, simplifying the process from observation to image acquisition. As a result, inspection throughput increases and traceability of images is improved, which supports efficient reporting and archive management in laboratory and industrial environments. Robust alignment for repeatable results and dependable imaging Mechanical stability and precise fit contribute to long‑term repeatability. The adapter’s construction focuses on secure seating and minimal lateral play, which reduces image shift when cameras are attached or removed. This mechanical reliability supports consistent imaging conditions over multiple sessions, aiding comparison and analysis. When combined with a dependable supplier network like Metav Werkzeuge, the accessory forms part of an assured supply chain that emphasises quality control and availability for workshops and industry alike. For dependable imaging performance with Euromex equipment, request the AI.9810-4 through Metav Werkzeuge for fast supply from Emmerich; contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and order support Technical data Article number: AI.9810-4 Name: C-Mount 1x photo adapter for AI.4058, AI.4158 and AI.1053-PLMi models Type: Adapter Brand: Euromex Cross-selling: AI.4058;AI.4158 UID: AI.9810-4 Facts Magnification: 1x Special features Standard C-mount interface Direct compatibility with listed Euromex models Mechanical alignment for camera coupling Intended for microscopy image documentation FAQ How does the C‑mount photo adapter attach to a camera? The adapter uses a standard C‑mount thread to couple a camera to the microscope port, ensuring a secure mechanical and optical connection for image capture with the AI.9810-4. Which microscope models are compatible with this adapter? Compatibility is specified for AI.4058, AI.4158 and AI.1053‑PLMi models; the adapter is tailored to the Euromex interface on those instruments. Will the adapter change the magnification seen through the microscope? No — the 1× optical coupling preserves the native magnification and field of view, so images remain true to scale for accurate documentation. Is the adapter suitable for digital image documentation in an industrial setting? Yes — the robust mechanical fit and C‑mount standard make it suitable for capturing reproducible images for inspection and reporting workflows. Can the C‑mount adapter be used with non‑Euromex systems? The adapter employs the common C‑mount standard and may fit other systems that provide a compatible port, but physical and optical compatibility should be verified before use. Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com

C-Mount Adapter 1x Magnification For 1 or 2/3" Camera, Precision - Euromex

Take advantage of a compact optical solution that ensures exact sensor coupling and consistent image scale. The combination of 1× magnification and standard C‑mount compatibility enables straightforward camera integration for inspection and documentation tasks. Order the adapter directly via Metav Werkzeuge or consult our technical team for application-specific guidance. Euromex C‑Mount Adapter DI.9810 — 1× magnification for 1" & 2/3" cameras The Euromex C‑Mount Adapter DI.9810 is a precision imaging adapter designed to provide 1× optical magnification when connecting 1" or 2/3" C‑mount cameras to inspection optics and imaging systems. Precise 1× optical magnification Compatible with 1" and 2/3" C‑mount cameras Standard C‑mount threading for easy coupling Suitable for inspection and documentation setups Reliable camera integration for consistent results The adapter delivers a stable mechanical and optical interface, preserving the sensor’s native field of view through 1× magnification. This means images remain true to scale when cameras are fitted to measurement microscopes or inspection optics, supporting repeatable documentation and visual inspection. The C‑mount standard ensures compatibility with a wide range of industrial and scientific cameras, reducing the need for additional optics and shortening setup time. The result is a dependable connection that maintains image alignment and sensor coverage. What 1× magnification does for processes and throughput Using a 1× magnification adapter avoids unintended changes to image scale, which simplifies calibration and measurement workflows. Where measurements or traceable documentation are required, preserving the sensor’s native projection reduces post‑processing and re‑calibration efforts. For production or QA environments this translates into fewer interruptions, consistent image metrics and improved process efficiency, as the camera’s field of view remains predictable across repeated inspections. Straightforward compatibility and mechanical fit The adapter is engineered for straightforward mechanical coupling to any standard C‑mount camera with 1" or 2/3" sensors. The standardised thread and optical path offer plug‑and‑play convenience for imaging chains, enabling fast mounting and replacement without bespoke mounts or custom machining. This compatibility supports modular systems where cameras are swapped for different tasks, maintaining optical alignment and minimising downtime during tool changes. Practical applications and where it adds value Well suited to visual inspection, documentation, and imaging tasks in workshops and laboratories, the adapter is particularly beneficial where a true scale image is required for measurement or comparison. It integrates into microscopy-based inspection rigs and industrial imaging setups, helping to standardise capture conditions across different camera models. By preserving sensor geometry and scale, it aids traceable inspection routines and simplifies training for staff who rely on consistent imaging results. For seamless integration advice and ordering information regarding the Euromex DI.9810 C‑mount adapter, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised technical support and supply from Emmerich. Technical data Article number: DI.9810 Product type: Adapter Brand: Euromex Facts Magnification: 1× Compatible sensor sizes: 1" and 2/3" Mount: C‑mount Special features Intended for imaging and inspection setups Standardised mechanical coupling for easy integration Designed for consistent image scale and repeatable documentation FAQ What sensor sizes does this adapter support? The adapter supports cameras with 1" and 2/3" sensors, maintaining native field of view when used with a C‑mount camera. Will the adapter change the image scale produced by the camera? No. The 1× magnification design preserves the camera’s native image scale, helping to keep measurements and documentation consistent. Is the adapter compatible with all C‑mount cameras? The adapter is made for standard C‑mount cameras; compatibility depends on the camera’s sensor size (1" or 2/3") and standard mechanical threading. Can the DI.9810 be used with microscopy objectives? Yes. The adapter is intended to couple C‑mount cameras to inspection optics and microscopes where a true 1× optical path and consistent scale are required. What is the product reference for ordering? The product is referenced as DI.9810 from Euromex and listed as a C‑mount adapter for 1" and 2/3" cameras. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com

C-Mount Adapter With 1× Lens, Standard Precision - Euromex

Take advantage of a straightforward camera-to‑microscope connection that preserves image scale and simplifies documentation workflows. The combination of a reliable C‑mount interface and an integrated 1× lens ensures consistent, true‑to‑scale imaging for visual inspection and digital capture; order directly via Metav Werkzeuge or consult the team for compatibility details. C-mount adapter with 1× lens — Euromex adapter for microscope camera attachment The C-mount adapter with 1× lens is a purpose-built adapter that enables the direct coupling of C‑mount cameras to microscopes, maintaining native magnification for accurate visual records and inspection imaging. C‑mount interface for camera attachment Integrated 1× lens for true‑to‑scale imaging Compact, lightweight construction Compatible with standard microscope ports Consistent, true-to-scale imaging for documentation and inspection Reliable image reproduction is fundamental for inspection, measurement records and quality control. The integrated 1× lens preserves the microscope’s native magnification, so captured images reflect the actual field of view without unintended scaling. This design reduces the need for post‑capture corrections and streamlines calibration routines, making the mount especially useful where traceable visual records or comparative imaging are required. Emphasis on optical consistency supports repeatable results across inspections. Simple integration into established microscope setups A clear mechanical interface accelerates installation and changeover. The C‑mount standard provides a secure, repeatable connection for a wide range of industrial and laboratory cameras, allowing existing imaging equipment to be reused without complex adapters. The adapter’s compact profile minimises leverage and maintains optical alignment, which helps to keep calibration stable over frequent use. Where quick switching between observation and digital capture is needed, the mount enables efficient workflows and reduced setup time. Practical design that supports everyday workshop use Durability and compactness are balanced to suit routine handling in production and lab environments. The adapter is engineered for repeated coupling cycles and compact storage when not in use, helping to save bench space. By avoiding added magnification, the optical insert reduces distortion and simplifies image analysis, which is beneficial for inspection, documentation and basic photomicrography tasks. The result is a practical, low‑complexity accessory that adds direct value to existing microscope systems. Guidance for compatibility and application Compatibility is typically determined by the microscope’s camera port and the camera’s C‑mount. The adapter is designed for straightforward mechanical matching with standard C‑mount cameras and common microscope ports; optical behaviour is neutral due to the 1× lens. For bespoke setups or measurements with strict metrological requirements, request technical clarification to confirm full compatibility with the imaging chain and sensor format to ensure field-of-view expectations are met. Choose the Euromex C‑mount adapter with its integrated 1× lens for reliable, true‑to‑scale imaging and contact Metav Werkzeuge for expert advice and prompt supply from Emmerich. Technical data Article number: DZ.9013 Product name: C‑mount adapter with 1× lens Manufacturer: Euromex Product type: Adapter UID: DZ.9013 Facts Magnification: 1× Mount type: C‑mount Special features Integrated 1× lens For microscope and C‑mount camera coupling Cross-selling SKUs: DZ.9005; DZ.9007 FAQ Is the adapter suitable for all C‑mount cameras? Compatibility depends on the camera sensor size and the microscope port; the adapter itself fits standard C‑mount cameras and preserves native magnification for typical sensor formats Will the 1× lens change the microscope magnification? The integrated 1× lens is intended to maintain the original magnification, so documented images remain true to scale Can the adapter be used for photomicrography and inspection imaging? Yes, the adapter supports documentation and inspection workflows by providing a direct, repeatable camera‑to‑microscope connection Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com

Clamp Mount For Microscope Holder 3-Port Mounting Accessory - Euromex

Benefit from the metal construction and clear compatibility with the AI.9571 cross‑reference to secure a reliable mounting solution; order the accessory directly via Metav Werkzeuge or ask the consultants for integration guidance. Metal insert compatible with specimen clamp (accessory for microscopes) — Euromex Metal insert compatible with specimen clamp (accessory for microscopes) offers a compact mounting solution for laboratory and workshop microscope setups Metal construction for stable mounting Compatible with AI.9571 cross‑reference Accessory for microscopes and inspection rigs Compact insert for precise specimen clamping Secure, repeatable mounting for specimen clamps The metal insert provides a focused solution for holding a specimen clamp within a microscope mounting assembly, reducing unwanted movement during inspection. Its robust construction supports consistent positioning and contributes to repeatable results in routine measurements and visual checks. By integrating a dedicated insert rather than adapting ad hoc fittings, downtime is reduced and setup consistency is improved, which benefits quality control and small‑batch production processes. Seamless integration with existing microscope holders Designed as an accessory/component, the insert integrates with standard holder systems where a dedicated mounting interface is required. The design emphasises simple fitment and alignment, enabling faster changeovers between samples and minimising operator effort. In practice, this means inspection stations can be configured more efficiently, supporting workflows that demand swift sample exchange without compromising stability or focus. Durability and workshop compatibility for everyday use Constructed from metal, the insert is suited to regular handling in laboratory and workshop environments where resilience matters. The material choice enhances wear resistance and maintains the geometry required for secure clamping over extended use. For engineers and technicians who depend on reliable ancillary parts to keep inspection lines operating, this component offers a pragmatic balance of durability and straightforward function while supporting the broader aim of precision in measurement setups. Contact Metav Werkzeuge for tailored advice on integrating the Euromex metal insert AI.9571-C into existing inspection rigs and to arrange procurement via +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: AI.9571-C Product type: Accessory / component Brand: Euromex Cross‑sell: AI.9571 UID: AI.9571-C Facts No numerical specifications supplied Special features Metal insert for specimen clamp Accessory/component for microscopes Compatible with AI.9571 Compact mounting solution FAQ What is the primary purpose of this insert? The metal insert is intended to provide a stable mounting point for a specimen clamp, enabling steady positioning during microscope inspections with the Euromex accessory AI.9571-C. Is the insert compatible with the AI.9571 item? Yes, AI.9571-C is listed for cross‑reference with AI.9571 and is designed for compatibility with that holder system. What material is the insert made from? The product is described as a metal insert, providing durable support for specimen clamping within microscope setups. Can this accessory be used in workshop inspection stations? The insert is suitable as an accessory/component for microscopes and inspection rigs, offering a robust option for workshop and laboratory environments. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com