High‑precision microscopes for metallographic inspection
A metallographic microscope is a specialised optical instrument designed to reveal the microstructure of metals and alloys, enabling precise analysis of grain size and identification of phases such as ferrite, pearlite and martensite while detecting microscopic defects like inclusions, pores and cracks. Used in industrial quality assurance, these microscopes combine a controlled reflected‑light illumination system, high‑quality objectives with critical numerical aperture and a tube and eyepiece for observation to ensure reliable resolution of fine structural details. Integrated digital camera systems and evaluation software allow norm‑compliant measurement, documentation and reproducible assessment, making them indispensable for material characterisation and process validation.
100x Plan Stress-Free PLPOLRi Objective 0.80 NA 2mm Working Distance - Euromex
Take advantage of the combination of high magnification, a robust numerical aperture and precise short working distance for consistent polarisation imaging; order this objective via Metav Werkzeuge or consult our specialists for selection support. Plan strain-free PLPOLRi 100×/0.80 IOS objective — Euromex high-resolution polarisation lens The Plan strain-free PLPOLRi 100×/0.80 IOS objective is a microscope objective designed for polarised reflected and transmitted light inspection, ideally suited to laboratory and industrial microscopy applications. 100× magnification for fine detail Numerical aperture 0.80 for high resolution Designed for polarisation contrast imaging 2 mm working distance for close-up observation Achieve measurable resolution and contrast for demanding inspection tasks The combination of 100× magnification and a 0.80 NA delivers a marked improvement in resolving power compared with lower-aperture optics. Higher numerical aperture increases the amount of light gathered and narrows the diffraction limit, which results in finer, high-resolution imaging of microstructures. For quality control and materials analysis this means clearer delineation between phases, grain boundaries and defects, enabling faster, more reliable decisions based on objective visual evidence. Reliable polarisation performance for reflective and transmitted imaging Constructed as strain-free optics, the lens is optimised for polarised light techniques in both reflected and transmitted modes. The absence of cover glass correction makes the design particularly suitable for direct surface inspection, polished sections and metallographic samples where a cover slip is not used. Strain-free transmission reduces internal birefringence, so polarisation contrast is preserved and stress-induced artefacts are minimised — a tangible benefit when assessing anisotropic materials or stress patterns. Compact working distance and system compatibility to streamline workflows A 2 mm working distance supports close-up observation of small or highly detailed specimens while maintaining sufficient clearance for delicate sample manipulation or specialised illumination. The objective is engineered for the iScope model series, facilitating straightforward integration into existing Euromex microscope setups and preserving parfocality across compatible objectives. Reduced changeover effort translates into shorter inspection cycles and improved throughput on the bench. Practical applications and trust in optical quality This plan objective suits metallography, materials science, failure analysis and advanced inspection tasks where polarisation reveals subtle structural information. As a Euromex optical component it is manufactured to industry standards for consistent performance across batches, offering repeatable imaging characteristics for serial inspections. For workshops and laboratories seeking dependable optics combined with professional supply logistics, this lens supports reproducible results and a predictable inspection workflow. For precise polarisation microscopy and assured compatibility with iScope systems, contact Metav Werkzeuge for expert advice and availability — Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany; info@metav-werkzeuge.com; +49 2822 7131930 Technical data Article number: IS.7900-R Product type: Objective / Lens Model series: iScope Manufacturer: Euromex Core specifications Magnification: 100× Numerical aperture: 0.80 Working distance: 2 mm Features Strain-free optics (reduced internal birefringence) Suitable for polarised reflected and transmitted light No cover glass correction FAQ What magnification and aperture does this objective provide? The PLPOLRi 100×/0.80 IOS objective from Euromex offers 100× magnification with a 0.80 numerical aperture, providing high-resolution imaging for fine structural analysis. Is this lens compatible with iScope microscopes? Yes, the objective is part of the iScope series and is designed for direct compatibility with Euromex iScope systems; the SKU is IS.7900-R for exact identification. Can the objective be used with cover-slipped specimens? This Euromex objective does not include cover glass correction; it is optimised for specimens without a cover slip and for reflective and transmitted polarisation techniques. How does the short working distance affect sample handling? The 2 mm working distance enables close observation of small features while requiring careful sample mounting; the reduced clearance improves image quality for surface and polished-section inspections. What types of inspection tasks are best suited to this objective? The lens is especially suitable for metallography, materials research and failure analysis where polarisation and high resolution reveal microstructural detail. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
100× Handheld Microscope With Switchable LED Illumination, Polyamide Body - Metav IndustryLine
Compact build, coated lens and integrated LED illumination combine for dependable close-up inspection; the lightweight polyamide housing keeps operator fatigue low. Order the handheld microscope directly via Metav Werkzeuge or contact the Metav consultants for application guidance. Handheld microscope M503.112 — compact inspection microscope with LED illumination (Metav IndustryLine) The Handheld microscope M503.112 is a compact inspection tool designed for visual checks and quality control in workshops and inspection stations, offering high optical power in a portable format. *Compact polyamide housing *100 dioptre optical power *Anti‑reflection coated lens *Weight 0.1 kg for handheld use Small form, big inspection advantage The compact dimensions (50 × 23 × 138 mm) and low weight make this inspection device ideal where mobility and rapid checks are essential. A lightweight body of 0.1 kg reduces operator strain during repetitive tasks, while the small footprint lets the instrument be used directly at assembly benches or test rigs. The integrated LED illumination provides consistent lighting for quick visual assessments, shortening inspection cycles and helping maintain production flow without complex setup or external lighting. Clear optics for reliable decisions Optical quality is crucial for trustworthy visual evaluation. The instrument features a coated lens, which reduces reflections and improves contrast at close range, and a narrow sight field 2.2 mm that concentrates viewing on the area of interest. These characteristics support precise visual differentiation of surface defects, markings and fine structures, enabling operators to make reliable pass/fail decisions at first glance. The specified 100 dioptre optical power delivers strong magnification for detailed inspection in a handheld format. Built for workshop use and everyday handling A durable polyamide housing offers a balance of robustness and lightness suited to workshop environments. The material resists everyday knocks and can be wiped clean between uses, preserving optical performance over time. The unit’s simple, ergonomic shape helps steady hand‑held inspection and supports repeatable positioning for routine quality checks. Supplied as a compact inspection solution, this device reduces downtime and supports standardised visual control procedures on the shop floor. Contact Metav Werkzeuge for a tailored application consultation or to request delivery information on the Metav IndustryLine handheld inspection instruments; reach the Metav sales team in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M503.112 GTIN: 4054469144481 Customs tariff number: 90111090 eClass: 32130101 ETIM: EC001685 Core measurements Dimensions: 50 × 23 × 138 mm Weight: 0.1 kg Optical power: 100 dioptre Sight field: 2.2 mm Special features Housing material: polyamide Lens: coated Illumination: integrated LED Category: Optik FAQ What magnification or optical power does the handheld microscope provide? The handheld microscope M503.112 from Metav IndustryLine is specified with 100 dioptre optical power, providing strong close‑up visual enlargement for detailed inspections. Is the lens treated to reduce glare and improve contrast? Yes. The instrument features a coated lens, which reduces reflections and enhances contrast for clearer observations during visual checks. What is the field of view and how does it affect inspections? The sight field of 2.2 mm concentrates the viewing area on fine details, which is useful for targeted inspection of small features and surface defects. How portable is the inspection device for shop‑floor use? With a weight of 0.1 kg and compact dimensions, the device is designed for handheld use at benches, assembly lines or test rigs where rapid, mobile inspections are required. What is the housing made from and how durable is it? The housing is manufactured from polyamide, offering a durable yet light construction suited to everyday workshop handling and easy cleaning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
105mm 0.75× Auxiliary Lens 105 mm Working Distance Compatible with NexiusZoom Series - Euromex
Take advantage of the increased working distance and straightforward compatibility to inspect larger components with confidence; the combination of a 0.75× magnification factor and a 105 mm working distance improves accessibility while preserving image stability. Order the auxiliary lens directly via Metav Werkzeuge or contact our consultants for compatibility checks and delivery from Emmerich. Auxiliary lens 0.75× for NexiusZoom – Euromex auxiliary lens, 105 mm working distance A 0.75× auxiliary lens designed to extend the reach of NexiusZoom inspection systems, providing a longer working distance for handling larger samples and assemblies while maintaining stable image quality. 0.75× magnification factor for reduced zoom 105 mm working distance for component access Fits NexiusZoom, NexiusZoom EVO, NexiusZoom ESD Compatible with P, PG, A, AP, U, B, BC and M stands Improved access for larger parts without sacrificing control The extended 105 mm working distance delivers practical space between optics and the workpiece, making it simpler to manoeuvre tools, fixtures or probes during inspection and assembly. By increasing clearance, the auxiliary lens reduces the risk of accidental contact with delicate samples and enables measurements and manipulations that require more room. This extension of reach is particularly valuable when inspecting housings, larger circuit boards or assembled components where standard optics would force an impractical working posture. Seamless integration with NexiusZoom stands for reliable mounting Designed specifically for the NexiusZoom family, this auxiliary lens ensures consistent mechanical fit and optical alignment on compatible stands. The lens is officially compatible with NexiusZoom, NexiusZoom EVO and NexiusZoom ESD systems and mounts to the listed stand types (P, PG, A, AP, U, B, BC and M), so the changeover is straightforward and repeatable. Correct matching of stand and head reduces setup time and preserves stability during inspections, which is essential for repeatable results in quality control environments. Optical behaviour explained: what 0.75× means in practice A 0.75× factor reduces the system magnification, widening the field of view while preserving usable resolution for inspection tasks. The result is an optical balance between overview and detail: operators gain a broader perspective to place components or to assess solder joints and component orientation, while still retaining sufficient detail for visual checks. For customers unfamiliar with magnification factors, think of this as an add-on that trades a modest amount of close-up enlargement for greater context and handling room, useful for assembly inspection and non-destructive examination. Practical benefits for bench and production use Fitting the auxiliary lens improves ergonomics and workflow: fewer repositionings, faster component access and more secure handling reduce cycle times during inspection and rework. The add-on is compact and intended for workshop use, where quick set-ups and dependable performance matter. Where additional technical data or verification is required, Metav’s consultants are available to confirm mechanical compatibility and to advise on the most suitable stand-head combinations for specific inspection scenarios. Contact Metav Werkzeuge for tailored advice and direct supply of Euromex auxiliary optics—email info@metav-werkzeuge.com or call +49 2822 7131930 for precise compatibility checks Technical data Article number: NZ.8907 Product type: Auxiliary lens Manufacturer: Euromex Facts Working distance: 105 mm Magnification factor: 0.75× Compatibility & features Compatible series: NexiusZoom; NexiusZoom EVO; NexiusZoom ESD Compatible stands: P, PG, A, AP, U, B, BC, M Intended use: Auxiliary lens for specified NexiusZoom stands FAQ What working distance does the auxiliary lens provide? The auxiliary lens offers a 105 mm working distance, giving extra clearance for handling and inspection tasks. Which systems is the lens compatible with? This Euromex auxiliary lens is compatible with NexiusZoom, NexiusZoom EVO and NexiusZoom ESD systems and fits the listed stand types (P, PG, A, AP, U, B, BC and M). How does the 0.75× magnification factor affect inspection? A 0.75× factor reduces overall magnification and widens the field of view, enabling easier positioning of larger samples while maintaining sufficient detail for visual checks. Is the lens suitable for precision measurements? The auxiliary lens is intended for inspection and handling where increased working distance is required; for metrological measurements, verify tolerances and calibration procedures with Metav Werkzeuge prior to use. What is the article number for ordering or cross-referencing? The article number is NZ.8907; please reference this SKU when enquiring about compatibility or placing an order. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
105mm Digital MacroZoom Microscope 0.7x–5x Zoom LCD With LED Ring Light - Euromex
Take advantage of the combination of versatile optical zoom, an integrated display and generous working distance for faster, more reliable inspections. Order or request product advice directly via Metav Werkzeuge for swift delivery and expert guidance. Euromex MZ.5000 — MacroZoom digital microscope with 0.7x–5x zoom and built-in LCD The MZ.5000 is a digital microscope intended for close visual inspection and documentation across laboratory, quality control and repair applications, combining a continuous 0.7x–5x zoom with an integrated LCD and LED ring illumination. 0.7×–5× continuous zoom optical range Integrated LCD screen for live observation Built-in LED ring illumination Generous 105 mm working distance Inspect fine details faster with flexible optical zoom A continuous 0.7x–5x zoom lets operators switch smoothly between overview and close-up views without changing optics, reducing inspection time and handling. This flexibility supports tasks where both context and detail matter, such as component verification, board-level inspection and material surface checks. The optical range enables accurate visual assessment of small features while preserving depth of field across magnification steps. For manufacturing environments, the resulting workflow efficiency translates into fewer part re-handlings and a more consistent inspection routine, helping to maintain throughput without sacrificing visual accuracy. Immediate evaluation thanks to the integrated display and illumination The built-in LCD provides instant visual feedback at the workstation, enabling rapid assessment without routing every image through a separate monitor. Complementary LED ring light illumination produces uniform lighting across the field of view, reducing shadows and highlighting surface features for clearer observation. Together these elements support quick decision-making during routine checks or troubleshooting sessions, simplifying setup and warming up inspection processes. The lighting and screen combination reduces the need for additional external equipment, streamlining bench space and allowing operators to focus on measurement and defect recognition. Comfortable handling and secure working distance for delicate tasks A 105 mm working distance offers ample room between optics and specimen for manipulations with tools, probes or tweezers, which is particularly useful in electronics repair, jewellery appraisal and sample preparation. The extra clearance minimises collision risk and permits safer handling of sensitive parts while maintaining sufficient magnification. As a digital microscope, the unit supports repeatable visual inspections and ergonomic operation at the bench, contributing to less operator fatigue and more consistent examination results. The overall design emphasises practical usability for workshop and lab settings where both access and precision are required. Contact Metav Werkzeuge today to discuss the Euromex MZ.5000 MacroZoom digital microscope and check availability from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and fast supply Technical Data Article number: MZ.5000 Product type: Digital microscope / digital camera Manufacturer: Euromex Microscopen bv Facts Zoom range: 0.7x–5x Working distance: 105 mm Special features Integrated LCD screen Built-in LED ring light Series: MacroZoom FAQ What magnification range does the digital microscope cover? The Euromex MZ.5000 provides a continuous 0.7x–5x optical zoom range for both overview and detailed inspection. Is there built-in illumination for even lighting? Yes. The unit includes an LED ring light that delivers uniform illumination across the field of view for improved surface contrast. Can the system be used without an external monitor? The integrated LCD allows direct live observation at the workstation, enabling inspection without an external screen where immediate visual feedback is preferred. What working clearance is available for manipulating samples? A 105 mm working distance gives sufficient space for the use of tools, probes or small fixtures during examination. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
105mm MacroZoom C-Mount 0.7x–4.5x Zoom Digital Microscope - Euromex
Take advantage of the combination of a versatile C‑mount zoom, a wide 0.7x–4.5x focal range and a generous 105 mm working distance for efficient macro inspection and simple integration into existing inspection setups. Order the Euromex MacroZoom MZ.4500 directly via Metav Werkzeuge or consult the Metav specialists for tailored advice. MZ MacroZoom series MZ.4500 — C‑mount digital microscope with 0.7x–4.5x zoom and 105 mm working distance (Euromex) The MZ MacroZoom series MZ.4500 is a C‑mount digital microscope head designed for flexible macro inspection in workshop and laboratory environments, offering a broad zoom range and an extended working distance for larger samples. C‑mount 0.7x–4.5x zoom lens 105 mm working distance for larger samples High flexibility for macro inspection Suitable for visual documentation and analysis Precise optics for adaptable magnification The core advantage lies in the C‑mount optical interface paired with the 0.7x–4.5x zoom, which provides a broad range of magnifications without the need for multiple objective swaps. This flexibility reduces set‑up time and supports varied inspection tasks, from coarse alignment to detailed visual checks. The optical design permits easy attachment of compatible camera bodies, enabling consistent imaging results across a range of sensor options while maintaining image stability for manual handling and process control. Clear documentation and controlled inspection results As a digital microscope component, the device facilitates reliable visual documentation when combined with a suitable camera and capture software. Image capture and reproducible viewpoints support traceability and quality assurance in assembly, repair and inspection tasks. The MacroZoom configuration enables operators to document both overview and detailed images quickly, helping to standardise inspection procedures and simplify reporting without needing specialised objectives for every task. Practical integration into production and workshop setups Compatibility with the C‑mount standard offers broad camera compatibility and straightforward integration into existing optical chains and stands. The 105 mm working distance provides room to manipulate samples or introduce auxiliary tools beneath the optics, improving ergonomics during inspection of bulkier components. This spacing also eases the addition of external illumination or measurement accessories while keeping the optical axis accessible for routine checks. Selection guidance for procurement and setup When specifying a macrozoom head, match camera sensor size and capture requirements to the optical range to avoid vignetting and to achieve the desired field of view. Consider the required working clearance for handling parts and the available mounting options on stands or holders. For customers seeking reliable macro inspection hardware, the Euromex MacroZoom concept offers a compact, serviceable option that balances magnification range with practical working distance, reducing the need for multiple specialised lenses. Contact Metav Werkzeuge today to discuss how the Euromex MacroZoom MZ.4500 with its 0.7x–4.5x C‑mount zoom and 105 mm working distance can be integrated into existing inspection workflows; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: MZ.4500 Product: Digital microscope camera Model series: MacroZoom Manufacturer: Euromex Core specifications Zoom range: 0.7x–4.5x Working distance: 105 mm Features C‑mount compatibility Optimised for macro inspection Intended for visual documentation and quality control FAQ What is the working distance of the MacroZoom head? The Euromex MacroZoom MZ.4500 offers a working distance of 105 mm for comfortable handling of larger samples. What zoom range does the optical head cover? The optical module provides a 0.7x–4.5x zoom range, suitable for both overview images and closer visual inspection. Can existing C‑mount cameras be used with this head? Yes, the C‑mount interface allows the MZ.4500 to be paired with a wide range of C‑mount cameras for image capture and analysis. Which applications suit this MacroZoom configuration? The device is well suited to workshop inspection, laboratory visual checks, documentation and routine quality control where variable magnification and working clearance are required. How should one choose a camera for this system? Select a camera whose sensor size and resolution match the intended field of view and detail level; ensure lens‑to‑sensor coverage aligns with the 0.7x–4.5x range. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
1080p HD Autofocus Digital Camera 0.50x Lens HDMI Wi‑Fi SD Card Compatible - Euromex
Combining the 1/1.9‑inch Sony sensor, 1080p output and both HDMI and Wi‑Fi connectivity delivers a compact inspection solution that speeds data capture and simplifies integration; order the VC.3034-HDS directly via Metav Werkzeuge or consult the Metav technical team for tailored deployment. VC.3034-HDS — Euromex high‑speed HD autofocus digital camera (1/1.9‑inch Sony sensor, HDMI & Wi‑Fi) The VC.3034-HDS is a high‑speed HD autofocus colour digital camera designed for microscopy and industrial inspection, configurable for standalone operation or for connection to a computer with included ImageFocus 4 software. HD autofocus and high‑speed 1080p capture 1/1.9" Sony sensor for improved sensitivity HDMI output with integrated recording software Wi‑Fi dongle for standalone or PC operation Crisp, high‑dynamic imaging for reliable inspection The camera uses a 1/1.9‑inch Sony sensor and delivers 1080p video with 16‑bit greyscale and 36‑bit colour depth, providing a wide tonal range and precise colour rendition for documentation and analysis. This sensor configuration enhances low‑light performance and fine detail capture, which is particularly relevant in quality control and material inspection. The result is higher measurement confidence and fewer false rejections during visual checks, supporting a rational improvement in throughput. Flexible data capture and seamless workflow integration Equipped with HDMI output, Standard SD card storage and a Wi‑Fi dongle, the unit supports both direct recording and networked transfer. The supplied ImageFocus 4 software enables live capture, annotation and export on a connected PC, while standalone recording to SD card removes the need for a permanent host computer. Those features reduce setup time and permit quick handover between bench‑top use and integration into existing inspection lines, improving operational efficiency and traceability. Fast, consistent focus and versatile optics Built‑in autofocus combined with the supplied 0.50x objective allows immediate sharp imaging across a range of working distances. The high‑speed acquisition capability reduces motion blur on moving samples and accelerates throughput for batch inspections. For users transitioning from handheld inspection to documented imaging, the consistent autofocus and matched objective reduce operator variability and rework, delivering better reproducibility in routine measurements. Designed for laboratories and production environments As a compact digital microscope camera, the device supports both manual microscopes and imaging stations used in labs, electronics inspection and education. Robust interface options and integrated recording provide a dependable basis for daily use, while the combination of standalone operation and PC connectivity makes deployment flexible across workstations. The VC.3034-HDS thus contributes to a smoother inspection process and a more reliable data pipeline. Discuss integration options for the VC.3034-HDS with Metav Werkzeuge — Metav's advisors support specification checks and deployment planning to ensure the camera aligns with the inspection task and workflow; contact via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VC.3034-HDS Description: HD autofocus colour high‑speed camera with integrated recording Product type: Digital camera / digital microscope Included lens: 0.50x objective Numbers / Core technical data Resolution: 1080p Sensor: 1/1.9 inch Sony sensor Greyscale depth: 16‑bit Colour depth: 36‑bit Interfaces: HDMI; Wi‑Fi Storage: Standard SD card Designs / Special features Integrated recording software Wi‑Fi dongle included Standalone operation or PC connection Supplied with ImageFocus 4 software FAQ What interfaces are available for live viewing and recording? The VC.3034-HDS supports HDMI live output and wireless streaming via the Wi‑Fi dongle; recording can be done to a Standard SD card or through the supplied ImageFocus 4 software on a connected PC. Is the camera suitable for low‑light microscopy tasks? Yes, the combination of the 1/1.9‑inch Sony sensor and 16‑bit greyscale depth in the VC.3034-HDS improves sensitivity and tonal gradation, making it suitable for delicate low‑light inspections. Can the camera operate without a computer? Standalone operation is supported: the VC.3034-HDS can record directly to a Standard SD card using the integrated recording function and the supplied Wi‑Fi dongle for network transfer when required. Which software is supplied for image capture and analysis? The camera is delivered with ImageFocus 4 software for live capture, annotation and export; the same software can be used when the device is connected to a PC. Is an objective supplied and how does autofocus perform? A 0.50x objective is included and the built‑in autofocus provides consistent sharpness across routine samples, reducing the need for frequent manual adjustments. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
1080p HD Ultra Colour Camera 6 MP Sony Sensor HDMI USB-2 With 0.37x Lens - Euromex
Fast, high-definition capture and flexible connectivity make the HD-Ultra Camera VC.3036-HDS an efficient choice for inspection and documentation; its 6 MP Sony sensor and integrated recording software support reliable image capture in both standalone and PC-linked workflows. Order the HD-Ultra Camera VC.3036-HDS directly via Metav Werkzeuge or ask our consultants if needed. HD-Ultra Camera VC.3036-HDS – 1080p high-speed digital camera with 6 MP Sony sensor and built-in HD screen (Euromex) The HD-Ultra Camera VC.3036-HDS is a high-speed 1080p digital camera for microscopy and inspection tasks, designed for standalone operation or integration with a computer-based imaging chain. 1080p high-speed capture 6 MP Sony sensor, 36-bit colour depth Built-in HD screen for standalone operation HDMI and USB‑2 outputs with SD card support Precision imaging for inspection and documentation Equipped with a 1/2.8 inch 6 MP Sony sensor and 36-bit colour processing, this camera delivers high-fidelity images that preserve subtle colour gradations and fine detail, which is crucial for visual inspection, materials analysis and digital archiving. The 1080p high-speed capability balances frame rate and image clarity, making it suitable for tasks where both smooth video and detailed stills are required. Explained simply: the larger sensor size and higher bit depth increase dynamic range and colour accuracy, reducing rework caused by ambiguous images. Flexible connectivity and streamlined workflow The unit provides HDMI and USB‑2 outputs and accepts a standard SD card, enabling immediate recording without a PC or direct streaming to an external monitor or workstation. Delivered with ImageFocus Plus integrated recording software and a 0.37x objective, the system supports both standalone documentation and computer-assisted analysis. This combination shortens inspection cycles, simplifies traceability and eases integration into existing lab or production-line setups, while the built-in screen removes the need for additional display hardware during quick checks. Practical applications and operational benefits Designed as a digital camera for microscopes and inspection stations, the VC.3036-HDS suits electronics inspection, quality control benches and education environments where reliable imaging and simple operation matter. The included objective and onboard recording capability reduce setup time, while the camera’s interfaces permit connection to imaging software for measurement or reporting. Combined with Metav’s approach to accessible precision, this device supports dependable results across small workshops and larger production facilities alike. For tailored advice on integrating the HD-Ultra Camera VC.3036-HDS into inspection workflows or to discuss compatibility with existing microscope stands and software, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation. Technical Data Article number: VC.3036-HDS SKU: VC.3036-HDS Brand: Euromex Product type: Digital camera / digital microscope Model name: HD‑Ultra Camera Facts Resolution: 6.0 MP Sensor size: 1/2.8 inch Sony sensor Colour depth: 36-bit Video: 1080p high-speed Interfaces: HDMI; USB‑2 Special features Built-in HD screen (integrated) Standard SD card support Integrated recording software included Supplied with 0.37x objective Operable standalone or with a computer Delivered with ImageFocus Plus software FAQ What interfaces are available for live display and recording? The camera offers HDMI and USB‑2 outputs and records to a standard SD card, enabling both live display and standalone recording with the HD‑Ultra Camera VC.3036-HDS. Can the camera record without a PC connected? Yes. The HD‑Ultra Camera VC.3036-HDS is designed for standalone operation and can save recordings directly to an SD card using its integrated recording software. Which software is supplied for image capture and review? The camera is supplied with ImageFocus Plus, the integrated recording software referenced in the product data for the HD‑Ultra Camera VC.3036-HDS. What lens is delivered with the camera and how does it help setup? A 0.37x objective is supplied, which assists rapid integration with common microscope heads and reduces the need for additional optics during initial setup. Is the camera suitable for quality control and educational use? Yes. The combination of 6 MP resolution, 36-bit colour fidelity and flexible connectivity makes the HD‑Ultra Camera VC.3036-HDS appropriate for both quality control benches and instructional demonstrations. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
10mm 20x Widefield Eyepiece Pair, WF 20x/10mm - Euromex
Benefit from clear, high‑magnification observation together with an expanded field of view: the 20× magnification and 10 mm field number ensure detailed, efficient inspection in routine and laboratory contexts; order the (Pair WF 20x/10 mm eyepieces) directly via (Metav Werkzeuge) or ask our consultants if needed. Pair WF 20x/10 mm eyepieces — Euromex wide‑field 20×, 10 mm field number Pair WF eyepieces by Euromex, designed to upgrade binocular microscopes for inspection and routine laboratory work Wide‑field WF design for expanded view 20× magnification for detailed observation 10 mm field number for larger field of view Matched pair for binocular microscopes Sharper detail and reliable magnification for quality control The wide‑field eyepieces deliver 20× magnification combined with a 10 mm field number, producing a balance of high detail and a recognisable viewing area that supports repeatable inspection work. The WF optical design enlarges the apparent field, which reduces the need for constant stage adjustment during component checks. For non‑specialists: the field number indicates how large the image circle is at the eyepiece aperture — a larger figure means more of the sample is visible without moving the specimen. This combination improves measurement throughput while keeping visual resolution high. Comfortable, fatigue‑reducing observation for longer sessions A matched pair optimises binocular viewing, easing alignment and reducing eye strain during prolonged examinations. The wide apparent field helps visual orientation, so users complete routine tasks faster and with fewer interruptions. The optical configuration is suited to repeated inspections and training environments where consistent image presentation supports reliable assessment. The result is improved operator comfort and a steadier workflow in both workshop and laboratory settings. Easy integration and practical use across inspection setups These eyepieces are compatible with standard binocular mounts and are offered as a matched pair to simplify replacement or upgrade procedures. The straightforward optical specification makes them a practical choice for microscopes used in education, quality assurance and general workshop inspection. Sourcing through Metav ensures steady availability and centralised logistics from Emmerich, supporting consistent supply for maintenance schedules and fleet standardisation. Discuss your application with Metav Werkzeuge to confirm fitment and secure a reliable supply of Euromex wide‑field eyepieces directly from our Emmerich location Technical data Article number: BE.6020 Label: Paar WF 20x/10 mm Okulare Brand: Euromex Product type: Eyepiece (pair) Eyepiece type: WF (wide‑field) UID: BE.6020 Facts Magnification: 20× Field number: 10 mm Special features Wide‑field (WF) design Matched pair for binocular microscopes Suitable for routine inspection and laboratory use Brand: Euromex FAQ What magnification do these eyepieces provide? The eyepiece pair provides 20× magnification, specified for the Pair WF 20x/10 mm eyepieces (Euromex, SKU BE.6020) to support detailed observation. What does the field number 10 mm mean in practice? A 10 mm field number denotes the diameter of the image circle at the eyepiece; in practice it gives a noticeably wider apparent field for easier specimen orientation and faster inspection. Are these eyepieces supplied as a pair for binocular microscopes? Yes, the product is sold as a matched pair, designed for installation in binocular microscope heads where consistent image alignment is required. Which applications suit these wide‑field eyepieces best? They are well suited to quality control, educational work and general workshop inspection where a balance of magnification and field of view improves throughput. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
10mm 20× WF Eyepiece Pair For StereoBlue, Wide Field 10mm - Euromex
High-contrast optical performance with 20× magnification and a 10 mm field number delivers finer detail and a broader apparent view for stereo inspection; the eyepieces are supplied as a pair for immediate binocular use. Order the eyepiece set directly via Metav Werkzeuge or consult our specialists for fast compatibility advice and availability. Pair of WF eyepieces 20×/10 mm for StereoBlue (SB.6020) — Euromex eyepiece set The Pair of WF eyepieces 20×/10 mm for StereoBlue is a wide-field eyepiece set designed for high-magnification stereo inspection on StereoBlue series microscopes. Wide-field optical design 20× magnification for fine detail 10 mm field number for wider view Compatible with StereoBlue series High-detail inspection with a larger apparent field of view These wide-field eyepieces combine a high 20× magnification with a 10 mm field number to produce a larger apparent field while maintaining sharpness at the image edge. The field number describes the diameter of the image circle in millimetres; a 10 mm field number therefore gives a noticeably broader viewing area than narrower-field optics, reducing the need for frequent stage movement during inspection. The optical layout is optimised for stereo heads, so contrast and depth perception remain consistent across the field, enabling reliable visual checks and precise manual tasks. Straightforward compatibility for seamless workflow integration Designed specifically for the StereoBlue series, the eyepieces are supplied as a matched pair for binocular configurations, ensuring symmetrical image height and colour balance between the two optical channels. The standardised mounting and magnification make retrofitting straightforward in compatible stereo microscopes, simplifying stock management and spare-parts planning. By standardising on a single eyepiece specification across inspection benches, process repeatability improves and operator training is more efficient, which supports faster throughput and fewer measurement interruptions. Quality distribution and practical support for workshops Produced by Euromex and distributed through Metav’s network, these eyepieces are intended for users who prioritise consistent optical performance and dependable supply. Metav Werkzeuge acts as a quality filter for the European market, combining broad product availability with technical knowledge to support procurement decisions. If additional technical data or a compatibility check is required, Metav provides clear specification support and fast responses by email or phone to assist with integration into existing inspection setups. For tailored compatibility checks and ordering, contact Metav Werkzeuge to request availability and technical advice for the Euromex SB.6020 eyepiece set Technical data Article number: SB.6020 Label: Pair of WF eyepieces 20×/10 mm for StereoBlue Product type: Eyepiece Manufacturer: Euromex Compatible series: StereoBlue Pieces per set: 2 Facts Magnification: 20× Field number: 10 mm Pieces per set: 2 Special features Wide-field (WF) eyepiece type Related SKUs: SB.1302;SB.1302-P;SB.1402;SB.1402-P;SB.1702;SB.1702-B;SB.1702-P;SB.1702-U;SB.1703;SB.1703-B;SB.1703-P;SB.1703-U;SB.1902;SB.1902-B;SB.1902-P;SB.1902-U;SB.1903;SB.1903-B;SB.1903-P;SB.1903-U;SB.3903;SB.3903-P FAQ What magnification do these eyepieces provide and how does that affect inspection? The SB.6020 eyepiece set provides 20× magnification, which increases visible detail for fine inspection tasks while the 10 mm field number helps retain a comfortable viewing area for navigation. Are these eyepieces compatible with other StereoBlue microscope heads? Yes, the eyepieces are designed for the StereoBlue series and the SB.6020 set is compatible with StereoBlue stereo microscope heads that accept wide-field WF eyepieces. How are the eyepieces supplied and why is that important? The SB.6020 is supplied as a matched pair, ensuring balanced binocular viewing, consistent image height, and uniform colour rendition—benefits that support reliable visual assessment during inspection. Can the SB.6020 eyepieces improve operator comfort during long inspection tasks? The combination of wide-field optics and moderate magnification reduces the need for frequent repositioning and allows a wider apparent field, which can lower visual fatigue and improve comfort over extended use. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
10mm 8x Table Magnifier 100 Pieces - Euromex
Take advantage of fast, repeatable visual checks with 8× magnification and a 10 mm lens, ideal for routine inspection tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Table Magnifier 8×, 10 mm — Desk magnifier by Euromex The Table Magnifier 8×, 10 mm is a compact desk magnifier designed for precise close‑up inspection on workbenches and inspection stations. 8× magnification for clear detail 10 mm optical lens for focused viewing Compact desk design for stable placement Suitable for workshop and laboratory inspection See defects earlier with measurable visual precision A consistent inspection routine reduces rework and scrap. The 8× magnification delivers enlarged detail for fast flaw detection, while the 10 mm lens concentrates the viewing field to make small features legible without distraction. For quality assurance and visual checks the compact lens setup supports faster decision‑making and fewer measurement interruptions, which contributes directly to improved process reliability and throughput. Comfortable bench inspection that supports steady work The desk format provides stable placement during repetitive tasks, decreasing hand tremor and visual fatigue compared with hand‑held options. As a bench tool, this desk magnifier facilitates sustained visual work in electronics, model making or inspection stations, helping operators maintain focus and reducing downtime caused by eye strain. The compact footprint keeps the work area organised and ready for immediate examination. Integrates into everyday inspection routines and procurement As a straightforward optical aid, the magnifier requires no complex setup and can be introduced into standard operating procedures with minimal training. Procurement benefits from a reliable, widely available inspection accessory that complements precision measuring equipment on the bench. For workshops seeking dependable visual inspection tools, the combination of proven optical magnification and compact design supports consistent quality control without overcomplication. Contact Metav Werkzeuge today for guidance on selecting the right inspection tools and for rapid supply from Emmerich — Metav Werkzeuge can advise on compatibility with existing equipment and delivery options Technical data Article number: PB.5040 Name: Table Magnifier 8×, 10 mm Brand: Euromex Product type: Magnifier Core measurements Magnification: 8× Lens diameter: 10 mm Design and features Desk/table design Compact format for bench use Intended for visual inspection tasks FAQ What level of magnification does this tool provide? The magnifier offers 8× magnification, which enlarges small details sufficiently for routine visual inspection and quality checks. What is the size of the viewing lens? The optical viewing element has a 10 mm diameter, concentrating the field for focused examination of fine features. Is this magnifier suitable for electronics inspection? Yes, the compact desk design and focused lens make the magnifier appropriate for visual inspection tasks in electronics assembly and solder joint checks. Can this tool be used continuously at a workstation? The design supports stable placement on workbenches and is suitable for extended visual tasks when used alongside appropriate lighting and ergonomic practices. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
10mm Aplanatic Magnifier 10x, Handheld - Euromex
Take advantage of 10x aplanatic optics and trusted Euromex workmanship for clear, distortion‑free inspection results; choose supply via Metav Werkzeuge or consult Metav's advisors for application support and sourcing. Aplanatic Magnifier 10x — Euromex magnifier with flat‑field optics The Aplanatic Magnifier provides flat‑field correction for accurate close visual inspection across a small working field in workshops and laboratories. Aplanatic flat-field optics 10x magnification for fine detail Euromex optical precision Suitable for close visual inspection Accurate optics that reduce distortion for reliable inspection The core advantage of the aplanatic design is correction for common aberrations, which yields a flat-field image with reduced spherical aberration and coma. This correction means details remain sharp from centre to edge, improving measurement verification and visual quality control. With 10x magnification the lens brings small features clearly into view without forcing constant refocusing, supporting faster, more reliable inspection workflows. The optical correction is particularly beneficial where precision visual assessment is part of the process, as it minimises interpretation errors caused by curved focal planes. Practical suitability across bench, laboratory and light‑assembly tasks Designed for direct observation tasks, the lens is a practical instrument for component inspection, print and PCB checking, fine assembly review and specimen examination in small labs. The magnifier’s corrected optics offer a consistent field of view that simplifies tasks requiring sustained scrutiny. For teams that perform repeated small‑part checks, the consistent focus across the viewing area reduces handling time and can lower the rate of rework. The instrument functions as a straightforward visual aid that integrates with existing inspection routines and bench setups. Proven brand background and dependable distribution Manufactured by Euromex, the device benefits from an established optical heritage that prioritises clarity and reproducibility. Purchasing via Metav Werkzeuge connects the optical quality of the lens with a dependable supply chain: Metav offers broad product availability from its Emmerich location and technical assistance for specification checks. For procurement departments and workshops seeking consistent inspection results, the combination of certified optics and a transparent supply partner supports quality assurance and process continuity. Contact Metav Werkzeuge for availability and application advice on the Euromex Aplanatic Magnifier PB.5036 — Metav’s advisors can confirm suitability for specific inspection tasks and arrange supply from Emmerich. Technical Data Article number: PB.5036 Product name: Aplanatic Magnifier 10x Product type: Magnifier Brand: Euromex UID: PB.5036 Facts Magnification: 10x Special features Aplanatic (flat-field) lens Intended for close visual inspection Euromex optical product FAQ What does aplanatic mean for visual inspection? Aplanatic describes a lens design corrected for spherical aberration and coma; the Euromex Aplanatic Magnifier delivers a flatter field and sharper edges, which aids reliable visual inspection. Is the magnifier suitable for electronics and PCB work? Yes, the corrected optics and 10x magnification make the magnifier suitable for detailed inspection of solder joints and small components on PCBs. How does the Euromex quality affect repeatability? Euromex instruments are produced to optical tolerances that help ensure consistent image quality, supporting repeatable inspection outcomes across batches. Can the magnifier assist in quality control procedures? The flat‑field view and stable magnification support quality control checks where visual criteria must be assessed consistently. Which identifier should be referenced when ordering or enquiring? Reference PB.5036 (Aplanatic Magnifier) to ensure the exact Euromex product is supplied. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
10mm Foldable Diamond Loupe 10x, Handheld Inspection Magnifier - Euromex
Take advantage of the folding design and 10× magnification for reliable, portable inspection — ideal for quick gemstone checks and precision visual control. Order the product directly via Metav Werkzeuge or ask our consultants if needed. Folding Diamond Loupe 10× – Compact inspection loupe by Euromex (PB.5037) The Folding Diamond Loupe is a compact inspection loupe intended for close visual examination of gemstones, jewellery and fine mechanical components Compact folding design 10× magnification for detailed inspection Ideal for gemstone inspection Pocket-sized for mobile checks Clear visual control for precision inspection The high-contrast 10× magnification provides a focused view of fine details, enabling reliable detection of surface faults and inclusions in small parts. For inspectors and craftsmen who require precise visual assessment, the strong magnification reduces the need for repeated handling and accelerates decision-making. The optical effect is achieved purely mechanically, so familiarity with common magnification terms is sufficient to estimate inspection resolution. Robust protection and portability that save time A foldable housing protects the lens when not in use, combining compact folding design with portability for routine on-site checks. The protective mechanism secures the optics during transport and minimises the risk of abrasion, which supports continuous availability of the tool in a workshop or at a bench. This simplicity translates into fewer interruptions during inspection cycles and a more efficient workflow. Versatile applications across jewellery and fine mechanics Designed as an inspection loupe, this tool suits tasks in gemology, watchmaking, jewellery retail and small-part quality control. The model supports quick visual decisions where magnified detail is decisive, for example identifying inclusions, evaluating finish quality or confirming assembly tolerances. The device’s intended use in gemstone inspection and small-component checks enhances its practical value in trade and laboratory contexts. Simple handling and dependable maintenance The device requires no power source, which ensures immediate readiness and low maintenance. Routine care consists of lens cleaning and safe storage; the folding action keeps handling straightforward. For teams that depend on repeatable, rapid checks, the minimal upkeep contributes to predictable availability and sustained accuracy in everyday inspection tasks. For purchase or technical advice on the Euromex Folding Diamond Loupe PB.5037, contact Metav Werkzeuge for stock availability and expert consultation — local supply from Emmerich with reliable delivery and specialist support Technical Data Article number: PB.5037 Item name: Folding Diamond Loupe Brand: Euromex Product type: Loupe Facts Magnification: 10× Special features Folding design Suitable for gemstone inspection Pocket-sized for mobile checks Manual optical magnifier FAQ What magnification does this loupe offer? The Folding Diamond Loupe delivers 10× magnification, suitable for detailed inspection of gemstones and small components. Is this loupe suitable for gemological use? Yes, the loupe from Euromex is intended for gemstone inspection and routine jewellery checks. How is the lens protected during transport? A foldable housing protects the optics when the loupe is closed, reducing the risk of scratches and contamination. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; Netherlands; info@euromex.com
10mm Metal Insert for Achios-X Inverted Materials Science Model, Component - Euromex
Take advantage of a robust metal construction and a precisely sized 10 mm aperture to ensure repeatable sample access and stable alignment in inverted microscopy workflows; benefit from straightforward replacement and expert advice via Metav Werkzeuge for seamless integration into laboratory setups. Metal insert with 10 mm aperture for Achios‑X inverted material science model (Euromex) — Accessory / Component The metal insert with a 10 mm aperture is a dedicated accessory designed to provide accurate sample access and stable mounting for the Achios‑X inverted material science microscope. Precise 10 mm aperture for controlled access Robust metal construction for industrial use Compatible with Achios‑X inverted setups Easy-to-replace stage component for quick servicing Accurate sample access that improves measurement repeatability The 10 mm aperture offers a defined opening for illumination and objective access, reducing variability when positioning small specimens. By using a dedicated metal insert, laboratories gain a predictable interface between the sample and the microscope stage, which supports repeatable imaging and consistent measurement results. The aperture size is intentionally compact to suit material science samples where controlled illumination and unobstructed objective proximity are required, and the solid construction minimises flexing or movement during focusing. Quick replacement and minimal downtime for productive workflows As a stage component, the insert is engineered for straightforward removal and replacement so that maintenance or configuration changes can be completed rapidly. This design reduces operational interruptions and supports efficient laboratory scheduling. The component’s simple geometry means no specialised tools are typically required for exchange; the solid build ensures that alignment is preserved after replacement, contributing directly to improved throughput and reduced calibration effort. Durable construction suited to demanding laboratory environments Manufactured as a metal accessory, the insert resists deformation under routine handling and retains its dimensional stability over repeated use. The material choice is intended to withstand typical laboratory conditions associated with material science work, including frequent mounting and adjustment of samples. Robust components curb the need for frequent replacements and provide a dependable element within the optical path, supporting long-term cost efficiency and consistent performance. Versatile use across research, education and industrial inspection This accessory is appropriate for research laboratories, university teaching facilities and industrial inspection benches that use inverted microscopes for material characterisation. The insert facilitates tasks such as small-sample positioning, focused illumination experiments and objective-side treatments where a defined opening is necessary. Prior to installation, verify model compatibility with existing stage fittings; the component is specified for the Achios‑X inverted material science model and serves as a practical replacement or spare part for that platform. Choose the Euromex metal insert with its reliable 10 mm aperture as a practical upgrade for Achios‑X inverted setups and contact Metav Werkzeuge for tailored advice or to confirm fitment for specific workflows. Technical data Article number: AI.9513-10 Description: Metal insert with 10 mm hole for Achios‑X inverted material science model Type: Accessory / Component Manufacturer: Euromex UID: AI.9513-10 Specifications Aperture diameter: 10 mm Materials / Features Metal construction Accessory for inverted material science microscope Designed for Achios‑X model FAQ What is the exact aperture size of this insert? The insert provides a 10 mm aperture, specified to give controlled access for objectives and illumination in inverted setups using the Achios‑X platform (SKU AI.9513-10). Is this component compatible with other inverted microscope models? The accessory is designed specifically for the Achios‑X inverted material science model; compatibility with other stages depends on their mounting geometry and should be checked against the Achios‑X interface specifications. How often should the insert be replaced under normal laboratory use? With standard handling the metal insert is durable; replacement frequency depends on usage intensity and handling practices. The component is intended to provide long service life in routine applications. Can the insert affect optical alignment or imaging quality? A consistently manufactured metal insert improves reproducibility by providing a stable mechanical interface; correct installation preserves optical alignment and supports reliable imaging. Where can spare parts be ordered and compatibility confirmed? Spare parts such as this insert (AI.9513-10) are available through Metav Werkzeuge and authorised distributors; Metav can confirm fitment for laboratory configurations. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
10mm Plan PLMi 10x/0.25 IOS Objective Working Distance 10 mm, NA 0.25 - Euromex
Take advantage of the combination of precise 10× magnification, a 0.25 numerical aperture and a practical 10 mm working distance for reliable material inspection. Order the objective directly via Metav Werkzeuge or consult our specialists for tailored advice. Plan PLMi 10×/0.25 IOS objective – Plan objective for iScope material science, 10 mm working distance Plan PLMi 10×/0.25 IOS objective is a plan-corrected lens designed for material science applications with no cover glass correction and a long working distance of 10 mm 10× magnification for clear observation 0.25 numerical aperture for improved resolution 10 mm working distance for larger samples High-resolution imaging tailored to material inspection The plan-corrected design ensures a flat field of view across the image, which provides consistently sharp detail at the edges as well as the centre. With 10× magnification and a 0.25 numerical aperture, the objective balances magnification and resolving power to make microstructural features and surface textures visible without excessive complexity. For routine inspection tasks in metallurgy, electronics or composite analysis, this lens offers a measurable improvement in image fidelity compared with basic objectives, enabling faster, more accurate evaluation. Practical working distance for sample handling and tooling A 10 mm working distance offers practical clearance between the lens and the specimen, simplifying the inspection of uneven surfaces, mounted parts or components with slight topography. The longer working distance reduces the risk of contact damage during focusing and allows the use of additional probes or lighting beneath the objective. In workshop and lab environments where sample manipulation is frequent, the reduced need for repositioning shortens inspection cycles and improves throughput. Designed specifically for materials rather than cover-glass samples The absence of cover-glass correction means the lens is optimised for direct observation of bulk samples rather than standard biological slides. This characteristic makes the objective particularly suitable for material science tasks such as fracture analysis, solder joint inspection and surface finish checks. The plan correction maintains image flatness across the field, while the optical configuration avoids the compromises that cover-glass correction would impose for thicker or uneven specimens. Compatibility and trustworthy manufacture The objective belongs to the iScope series and is compatible with systems designed for that mount and optical standard. Manufactured by Euromex, the lens benefits from professional optical production and quality control consistent with laboratory use. Specified as a plan objective with IOS designation, it integrates into inspection workflows where consistent, repeatable imaging is required and complements other iScope optics for multi-magnification setups. Contact Metav Werkzeuge for personalised advice on the Euromex iScope objectives—discuss mounting compatibility, sample requirements and recommended illumination to ensure the selected plan objective meets the specific inspection task. Technical data Article number: IS.8110 SKU: IS.8110 Product type: Objective / lens Model series: iScope Manufacturer: Euromex Specifications Magnification: 10× Numerical aperture: 0.25 Working distance: 10 mm Features and compatibility Plan objective (flat-field correction) IOS designation No cover glass correction Intended for material science applications FAQ What magnification and resolving power does this objective provide? The Plan PLMi 10×/0.25 IOS objective delivers 10× magnification with a 0.25 numerical aperture, offering improved resolution for material inspection tasks. Is this objective suitable for biological slides with cover glass? No, the lens has no cover glass correction and is optimised for direct observation of bulk materials rather than standard cover-glass-mounted biological samples. Which microscope series is this objective compatible with? The objective is part of the iScope series and is designed to work with systems compatible with the iScope optical standard and IOS mounting. How does the 10 mm working distance benefit inspection workflows? A 10 mm working distance provides clearance for uneven samples and reduces the chance of contact during focusing, enabling safer handling of larger or irregular specimens. Can this objective be used for metallurgy and electronics inspection? Yes, the plan correction and optical specification make it well suited to material science applications such as metallographic inspection, solder joint evaluation and surface analysis. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
10mm Plan Stress-Free PLPOLi 10x/0.25 IOS Objective For iScope Transmitted Polarisation, No Cover-Glass Correction, 10 mm Working Distance - Euromex
Benefit from strain-free plan optics, a 0.25 numerical aperture and a 10 mm working distance to achieve consistent polarisation contrast in transmitted-light applications. Order the PLPOLi 10x/0.25 objective directly via Metav Werkzeuge or ask our consultants if needed. PLPOLi 10x/0.25 Strain-free Plan Polarising Objective for iScope — 10 mm working distance A PLPOLi 10x/0.25 objective for the iScope series, optimised for transmitted-light polarisation with a 10 mm working distance and without cover-glass correction. Strain-free plan optics for flat field Polarising transmitted-light design 10× magnification with 0.25 numerical aperture 10 mm working distance for thicker samples Exceptional optical performance for polarisation work The strain-free design and plan optics provide a uniformly flat field that reduces image artefacts and ensures reliable contrast when using polarising methods. With 10× magnification and a 0.25 numerical aperture, the lens balances resolving power and depth of field for clear structural detail without excessive compromise on working distance. The corrected flat field supports consistent imaging across the visible field, which benefits routine documentation and comparative analyses in laboratories relying on transmitted-light polarisation. Practical compatibility and sample handling advantages Engineered for the iScope series, the objective offers a 10 mm working distance that accommodates slightly thicker samples and polariser assemblies without immediate risk of contact. The specification of no cover-glass correction indicates optimisation for specimens commonly examined without a coverslip or in setups where standard cover-glass compensation would degrade polarisation fidelity. The objective’s mechanical and optical geometry simplifies integration with polarising filters and transmitted-light condenser systems, reducing setup iterations and improving throughput in inspection workflows. Suited applications and dependable supply chain The polarising design supports applications in mineralogy, materials research and biological preparations that require transmitted-light polarisation contrast; repeatable results are facilitated by the objective’s polarising transmitted-light orientation and consistent optical correction. Manufactured by Euromex, the component is intended for routine laboratory use where reproducibility and stability matter. Availability through Metav’s distribution network ensures access to a curated supply and experienced procurement pathways for workshops and specialist facilities. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss integration of the PLPOLi 10x/0.25 objective into iScope setups and to request technical advice and supply options Technical data Article number: IS.7910-T Product type: Objective / Lens Model series: iScope Core specifications Magnification: 10× Numerical aperture: 0.25 Working distance: 10 mm Special features Strain-free optical design Plan field correction For transmitted-light polarisation No cover-glass correction FAQ What is the benefit of a strain-free objective for polarised transmitted-light work? A strain-free construction minimises internal stress birefringence that can distort polarisation contrast; the PLPOLi 10x/0.25 objective by Euromex preserves accurate polarisation effects for clearer interpretation. Is the PLPOLi 10x/0.25 suitable for samples with a cover glass? The objective is specified without cover-glass correction, so it is optimised for specimens examined without a coverslip or where cover-glass compensation is not applied; use of a cover glass may require verification of focal offset. Can this objective be used with other microscope series besides iScope? Mechanical and optical compatibility is designed for the iScope series, but the PLPOLi 10x/0.25 objective can be evaluated for use on other transmitted-light systems provided thread and parfocal parameters match. How does the 0.25 numerical aperture affect imaging? A 0.25 numerical aperture provides a balance between resolution and depth of field, offering sufficient resolving power for structural details while maintaining manageable focal tolerance for routine polarisation examinations. What mounting or handling considerations apply to this polarising objective? Due to its polarising function and 10 mm working distance, the objective benefits from careful alignment of polariser/analyser elements and avoidance of unnecessary mechanical force; regular optical cleaning and secure mounting maintain performance. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
10mm Plan Stress-Free PLPORLi 10x/0.25 IOS Objective for iScope Reflected and Transmitted Polarisation, No Cover Glass Correction - Euromex
Take advantage of a combination of 10× magnification, a numerical aperture of 0.25 and a 10 mm working distance to achieve repeatable polarised inspections in mixed transmitted and reflected-light workflows; order the lens directly via Metav Werkzeuge or consult our specialists for integration advice. IS.7910-R objective lens (10×, NA 0.25, 10 mm working distance) The IS.7910-R is an objective for the iScope series, engineered for polarised reflected and transmitted-light inspection with plan, stress-free optics and a fixed 10 mm working distance. 10× plan objective, stress-free design Numerical aperture 0.25 for clear resolution 10 mm working distance for sample clearance Polarisation-capable for contrast enhancement High-resolution optics for consistent inspection results The lens delivers 10× magnification combined with a numerical aperture of 0.25, providing a balance between depth of field and resolving power that favours practical inspection tasks. The plan, stress-free optical design reduces image distortion across the field, so features remain well defined from edge to centre. These characteristics contribute to stable measurement and documentation routines, supporting higher first-pass acceptance rates in production control and quality assurance. Why numerical aperture and working distance matter The numerical aperture 0.25 determines the objective’s light-gathering capacity and resolving limit; higher NA improves detail capture but narrows depth of field. In parallel, the 10 mm working distance offers sufficient clearance for uneven specimens and fixturing without compromising image quality. For technicians less familiar with optical terms: a modest NA with a generous working distance often provides the best compromise between ease of use and fine-detail detection in industrial inspection settings. Suitable uses and optical behaviour in polarised setups Designed for both reflected and transmitted-light polarisation, the lens supports contrast enhancement techniques used in material inspection and microstructure analysis. Because the design specifies no cover-glass correction, the optical path is optimised for specimens viewed without a cover slip; this is advantageous for bulk samples, metallographic mounts and layered assemblies where a cover glass would alter focus. Integration into polarised workflows helps reveal stress patterns, birefringence and subtle surface features that standard brightfield observation can miss. System integration and practical handling The objective is part of the iScope series and complements modular microscope configurations where polarisation capability is required. The plan, stress-free construction simplifies alignment and reduces the need for frequent recalibration under normal use, supporting predictable results across shifts. For documentation and repeated inspections, consistent optical geometry streamlines imaging parameters and reduces operator-dependent variation, thereby improving traceability in inspection records. For polarised inspection tasks and technical guidance on integrating the IS.7910-R into an existing iScope setup, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: IS.7910-R Manufacturer: Euromex Product type: Objective / lens Series: iScope Numbers / Core technical data Magnification: 10× Numerical aperture: 0.25 Working distance: 10 mm Special features Polarisation for reflected and transmitted light Plan, stress-free optical design No cover-glass correction FAQ Is this objective suitable for polarised microscopy? Yes. The IS.7910-R objective is specified for polarisation in both reflected and transmitted-light setups, enabling contrast enhancement and stress or birefringence visualisation. What does "no cover-glass correction" mean for routine inspection? It means the IS.7910-R is optimised for specimens viewed without a cover glass; for samples requiring a cover slip, optical aberrations can occur unless compensated by other system optics. Can the objective be used for metallographic inspection? Yes. The plan, stress-free design and 10 mm working distance make the lens appropriate for metallographic mounts and bulk specimens commonly encountered in industrial microscopy. How does the numerical aperture affect image quality in practice? The numerical aperture of 0.25 offers improved detail resolution while maintaining a practical depth of field, which is beneficial for routine inspection where both clarity and handling tolerance are important. Is the lens compatible with all iScope models? The objective is part of the iScope series and is intended for iScope-compatible mounts; compatibility depends on the microscope’s mechanical interface and polarisation module configuration. Manufacturer / Responsible: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
10mm Scale Magnifier 10x LED, Precision Viewing - Euromex
Combining 10× magnification, integrated LED illumination and a built‑in measurement scale, this magnifier delivers reliable visual inspection and fast, repeatable checks; order directly via Metav Werkzeuge or consult our technical advisors for application guidance. 10x LED Scale Magnifier — Euromex handheld magnifier with integrated LED and scale The 10x LED Scale Magnifier is a handheld magnifier with integrated LED illumination and a built‑in measurement scale, designed for rapid visual inspection and comparative measurements. 10× magnification for detailed inspection Integrated LED for consistent illumination Built‑in scale for quick measurements Increased accuracy through clear optics With 10× magnification and a wide, unobstructed viewing field, the lens supports precise visual inspection of small components and fine graduations. Optical enlargement reduces the need for repeated manual checks and helps identify surface defects and printing errors earlier in the process; this leads to more consistent quality control results. The combination of magnification and the measurement scale enables fast comparative checks without switching between instruments, saving time in repetitive inspection tasks. Consistent lighting for repeatable results The integrated LED illumination provides a stable, shadow‑reducing light source that improves visibility of texture and micro‑features. Stable light conditions increase measurement repeatability and reduce operator fatigue during extended inspection sessions. LEDs offer immediate, even illumination so that surface irregularities on metals, plastics and other workshop materials become easier to recognise, supporting reliable decision‑making in incoming inspection and small‑parts assembly. Practical design for workshop and bench use The compact, handheld format and the clearly readable built‑in scale suit bench, production and mobile inspection jobs alike. Lightweight handling and immediate scale readability accelerate inspection cycles and support lean workflows in small workshops and production lines. For laboratories or specialised trades that require tailored guidance, Metav Werkzeuge provides application advice and further specification details to ensure the tool integrates smoothly with existing inspection routines. Contact Metav Werkzeuge today for application advice on the Euromex magnifier and to confirm compatibility with workshop requirements, with fast delivery from our Emmerich hub. Technical Data Article number: PB.5047 Product name: 10x LED Scale Magnifier Product type: Magnifier Manufacturer: Euromex Facts Magnification: 10× Special features Integrated LED illumination Built‑in measurement scale Handheld inspection magnifier FAQ What magnification does the magnifier provide? The magnifier offers 10× magnification, which is suitable for detailed visual inspection and reading fine graduations. Is the light source integrated or external? The Euromex magnifier features integrated LED illumination to deliver consistent, shadow‑reducing light across the lens. Can the built‑in scale be used for quick measurements in production? Yes, the built‑in scale allows fast comparative measurements on the workbench and speeds up routine inspection tasks. Which applications suit this magnifier best? The tool is intended for bench and workshop inspection, quality control of small parts, jewellery and electronic assembly checks. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
10mm WF Eyepiece 20× With Micrometer Scale, Compatible With StereoBlue - Euromex
Take advantage of the combination of 20× magnification, an integrated micrometer scale and a 10 mm field number for precise, repeatable measurements and faster specimen orientation; order the eyepiece via Metav Werkzeuge or consult their advisors for application support. Euromex WF eyepiece SB.6020-M — 20× magnification with integrated micrometer scale Euromex WF eyepiece SB.6020-M is designed for stereo microscope measurement tasks, offering a wide field view with an eyepiece micrometer for direct size readings in inspection and assembly workflows. Wide-field WF eyepiece, 20× magnification Integrated micrometer scale for measurements Field number 10 mm for broad viewing Compatible with StereoBlue series Measure directly at the eyepiece for faster inspection cycles The integrated micrometer scale allows direct, repeatable readings without immediate reliance on an external stage micrometer, which accelerates common inspection tasks and reduces handling time. At 20× magnification the ocular supplies a detailed view that supports routine dimensional checks and visual comparators; the built-in scale serves as a practical reference for quick assessments and cross-checks. Operators benefit from a streamlined measurement routine, where the time between observation and documented result is minimised, improving throughput in production and quality-control stations. Wider field for quicker specimen alignment and less eye strain With a 10 mm field number and a true wide-field (WF) ocular design, this eyepiece provides an expanded viewing area that simplifies specimen orientation and reduces the need for frequent stage movement. The broader visual field helps maintain context while examining components, which is particularly useful during sorting or when scanning for defects. The optical layout is conceived to deliver a comfortable inspection experience during extended use, supporting steady focus and lower observer fatigue for repeat inspections. Designed to integrate into established stereo workflows Compatibility with the StereoBlue series ensures a straightforward upgrade path: the eyepiece fits existing optical tubes and preserves the microscope’s established working distance and ergonomic setup. Supplied as a single unit per set, the ocular is suitable for selective replacement or targeted enhancements of microscope pairs without the need for complete instrument changeover. This modular approach keeps downtime to a minimum and helps maintain consistent measurement routines across the workshop. Practical construction for routine laboratory and bench use The eyepiece is configured for everyday use in inspection, education and light assembly environments where clear measurement cues and dependable optics matter. As a specialised ocular, it complements instruments dedicated to visual inspection and offers a compact solution when a dedicated measuring microscope is not available. The simple mechanical nature of the micrometer scale reduces maintenance requirements and allows quick verification routines during regular quality checks. Contact Metav Werkzeuge to discuss how the Euromex SB.6020-M WF eyepiece can streamline measurement steps in existing stereo microscope setups; Metav’s advisors are available via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: SB.6020-M Label: WF eyepiece 20×/10 mm with micrometer scale Manufacturer: Euromex Product type: Eyepiece Core specifications Magnification: 20× Field number: 10 mm Pieces per set: 1 Features & compatibility Wide-field (WF) ocular Integrated micrometer scale Compatible with StereoBlue series FAQ How does the integrated micrometer scale aid routine measurements? The integrated micrometer scale in the SB.6020-M allows direct visual sizing at the eyepiece, enabling fast comparative measurements and repeatable checks without immediate reference to a separate stage scale. Which microscope series is this eyepiece compatible with? Compatibility is specified for the StereoBlue series, so the eyepiece matches the optical and mechanical interfaces used in those stereo microscopes. Is the eyepiece supplied individually or as a pair? The product is supplied as a single eyepiece per set, allowing selective replacement or individual upgrades. Can the ocular be used for imaging as well as observation? The eyepiece is designed primarily for observation and measurement; imaging results depend on the microscope’s camera port and adapter configuration rather than the eyepiece alone. How should the micrometer scale be calibrated for precise work? Calibration is carried out against a stage micrometer or calibration slide at the intended magnification; record the scale factor applicable to the SB.6020-M under the microscope’s current optical configuration to ensure traceable readings. Manufacturer / Responsible: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
10mm Widefield Eyepiece 20× With Reticle, Compatible With StereoBlue - Euromex
Benefit from precise 20× magnification and an integrated crosshair for accurate alignment and repeatable measurement — ideal for inspection benches and quality-control tasks. Combine optical clarity, compatibility with the StereoBlue range and consistent supply from Metav Werkzeuge to secure dependable workshop performance; order via Metav Werkzeuge or consult their advisors for system matching. WF eyepiece 20×/10 mm with crosshair — Wide-field eyepiece by Euromex A WF eyepiece 20×/10 mm with crosshair for StereoBlue stereomicroscopes, designed to support exact alignment and detailed visual inspection in laboratory and production environments Wide-field view, 10 mm field number 20× magnification for detailed observation Integrated crosshair for precise alignment Compatible with StereoBlue stereomicroscopes Improve alignment and measurement accuracy on the bench The integrated crosshair provides a fixed visual reference that simplifies centring, alignment and repeatable positioning during inspection or assembly. With 20× magnification, fine details become discernible while the reticle aids in quick comparative checks and straightforward visual measurement. For technicians and quality engineers, the combination of a defined reticle and high magnification translates into fewer rechecks and more reliable process control, supporting efficient workflows on the production floor. Wider field of view for comfortable, efficient inspections The wide-field design delivers a larger apparent viewing area compared with standard eyepieces; the 10 mm field number means more of the specimen is visible without moving the stage. This broader visual envelope reduces eye and head movement during longer inspection sessions and accelerates routine tasks such as component sorting or solder-joint checks. Optical clarity and an extended field help to maintain consistency across repeated inspections, so operators stay precise without sacrificing ergonomics. Reliable fit, straightforward integration and trusted optics Engineered for compatibility with the StereoBlue series, the eyepiece inserts easily and maintains a secure optical alignment when swapping between objectives or microscope heads. Manufactured by Euromex, the component benefits from proven workshop-grade tolerance standards, ensuring repeatable performance in everyday use. Supplied through Metav Werkzeuge’s logistics and quality filter in Emmerich, availability and consistent specification are priorities, making the eyepiece a pragmatic choice for laboratories and workshops that require dependable optical components. Contact Metav Werkzeuge for tailored advice on integrating Euromex eyepieces into existing microscopes or to secure stock for production needs — Metav Werkzeuge provides local supply and technical guidance from Emmerich. Technical data SKU: SB.6020-C Description: WF eyepiece 20×/10 mm with crosshair Manufacturer: Euromex Product type: Eyepiece Compatible series: StereoBlue Eyepiece type: WF (wide-field) Crosshair: yes Pieces per set: 1 Core data Magnification: 20× Field number: 10 mm Pieces per set: 1 Special features Wide-field eyepiece Integrated crosshair reticle Compatibility: StereoBlue stereomicroscopes Manufacturer: Euromex Cross-selling SKUs: SB.1302; SB.1302-P; SB.1402; SB.1402-P; SB.1702; SB.1702-B; SB.1702-P; SB.1702-U; SB.1703; SB.1703-B; SB.1703-P; SB.1703-U; SB.1902; SB.1902-B; SB.1902-P; SB.1902-U; SB.1903; SB.1903-B; SB.1903-P; SB.1903-U; SB.3903; SB.3903-P FAQ Is this eyepiece compatible with StereoBlue stereomicroscopes? Yes. The WF eyepiece 20×/10 mm with crosshair is specified for compatibility with the StereoBlue series and fits the eyepiece tubes designed for that product line. What does the WF designation mean and how does it help in inspection? WF stands for wide-field; a wide-field eyepiece such as this offers a larger apparent field of view, improving visual coverage and reducing the need to reposition the sample during detailed inspection. Can the crosshair be used for measurement tasks? The integrated crosshair provides a stable visual reference for alignment and comparative checks; for calibrated, traceable measurements supplementary stage micrometers or calibrated reticles should be used alongside the eyepiece. Is the eyepiece supplied individually or in sets? The eyepiece is supplied as a single unit (pieces per set: 1), suitable for replacement or to assemble into multi-eye configurations where required. How should the eyepiece be cleaned to avoid damage? Clean optical surfaces gently with a soft lens cloth and, if necessary, a small amount of lens-cleaning fluid; avoid abrasive materials and immersion in liquids to preserve coatings and optical quality. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
10pc Glass Shields for Stands ST.1730 and ST.1740, Consumables - Euromex
These replacement glass fuses deliver reliable protection and straightforward replacement for Euromex tripod lighting, supporting uninterrupted microscopy work and predictable consumable management; order the Glass fuses AE.5252 directly via Metav Werkzeuge or ask our consultants if needed. Glass fuses AE.5252 — microscopy consumables for Euromex tripods, compatible with ST.1730 and ST.1740 Glass fuses AE.5252 provide a direct replacement for lighting protection units used on Euromex tripod models, designed as practical consumables for laboratory and workshop microscopes Compatible with ST.1730 and ST.1740 tripods Pack of 10 replacement glass fuses Easy to replace without specialised tools Essential spare part for routine maintenance Continuous protection for illumination systems The glass fuses act as a simple and effective safeguard for microscope illumination circuits, preventing damage to lighting modules in case of electrical faults. By integrating a replaceable fuse element, the lighting assembly is protected without complex intervention, which preserves the lifespan of more costly components. This pragmatic design reduces unexpected downtime and helps maintain a consistent supply of usable illumination in both teaching and inspection environments. Fast swap-out to keep workflows moving When a fuse does blow, swift replacement ensures minimal interruption. The components are designed for straightforward installation, allowing technicians to restore functionality without specialised equipment. Keeping a set of genuine spare fuses on hand supports predictable maintenance cycles and reduces reliance on ad hoc solutions. The clear functional purpose of the part streamlines inventory planning and supports efficient workshop routines. Built for laboratory and educational settings Specified as microscopy consumables, these fuses are intended for routine use in laboratories, schools and light industrial inspection stations. Compatibility with the Euromex tripod models ST.1730 and ST.1740 guarantees correct fit and electrical behaviour where those tripods are in service. Purchasing original replacement parts helps maintain consistent performance characteristics and avoids mismatches that could affect safety or illumination quality. Practical choice from a trusted supply chain Selecting recognised spare parts simplifies technical decision-making and strengthens equipment reliability. Procuring the correct fuse from an established supplier reduces the risk of incorrect dimensions or ratings being used. This pragmatic approach to consumables procurement supports long-term cost efficiency by protecting more expensive lighting and microscope components from failure. Contact Metav Werkzeuge today to request Euromex glass fuses AE.5252 for ST.1730/ST.1740 and receive guidance from our technical advisors in Emmerich on compatibility and supply Technical Data Article number: AE.5252 UID: AE.5252 Label: Glass fuses for tripods ST.1730 and ST.1740, 10 pieces Product type: Microscopy consumables Manufacturer: Euromex Facts Pack quantity: 10 Compatible models: ST.1730, ST.1740 SKU: AE.5252 Special features Replacement part for tripod lighting protection Intended as a routine consumable for laboratories and education Brand: Euromex Cross-sell: ST.1740, ZE.1626 FAQ Are these fuses suitable for Euromex tripods ST.1730 and ST.1740? Yes. The AE.5252 glass fuses are specified for use with Euromex tripods ST.1730 and ST.1740 and match the original fit and function. How straightforward is the replacement process? Replacement of the glass fuses AE.5252 is designed to be simple and quick, enabling technicians to restore illumination without specialised tools. Can these fuses be used in other Euromex lighting units? Compatibility is confirmed for ST.1730 and ST.1740 tripods; for other Euromex units, consult technical specifications or contact Metav Werkzeuge to verify suitability. Is it better to stock genuine Euromex spare parts? Using genuine Euromex consumables such as AE.5252 helps ensure reliable electrical behaviour and reduces the risk of damage to lighting modules or tripods. Who to contact for additional technical information or ordering? For further technical details or to order AE.5252, contact Metav Werkzeuge; their technical advisors can confirm compatibility and advise on supply options. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
10x Achromatic Loupe, Handheld Magnifier - Euromex
Take advantage of precise, affordable inspection with an achromatic 10× magnifier that reduces colour fringing and preserves fine detail; its compact, handheld design speeds up routine checks while remaining simple to maintain. Order this inspection tool directly via Metav Werkzeuge or consult their specialists for application advice. Achromatic Magnifier 10x — Handheld magnifier by Euromex The Achromatic Magnifier 10x is a compact handheld loupe engineered for visual inspection, quality checks and hobby microscopy where accurate detail and reduced chromatic aberration matter. Achromatic 10× optical system Compact handheld design for ease of use Clear edge-to-edge image quality Robust build for everyday inspection Faster, more reliable visual inspection on small details The 10× magnification combined with an achromatic lens minimises colour fringing and significantly improves visual accuracy for close examination. This optical pairing helps to reveal fine scratches, print defects and small component irregularities with high optical clarity, making measurements and pass/fail assessments more reliable. For users in workshops and inspection stations, that clarity translates into fewer repeat checks and a steadier quality process. Comfortable handling that reduces fatigue during repetitive checks A handheld layout and compact form factor provide practical handling for repetitive tasks without adding bulk to the tool kit. The design emphasises a steady grip and straightforward operation, which helps to shorten inspection cycles and reduce operator fatigue. Built for regular use, the construction supports quick positioning and stable viewing during prolonged visual tasks. Consistent, trustworthy results for workshop and hobby applications Edge-to-edge performance delivers clear image reproduction across the field of view, improving confidence in routine checks and hobby investigations alike. The loupe’s optical correction offers a true-to-colour rendering that aids visual decision-making in quality control or delicate assembly work. For labs and benches requiring repeatable visual inspections, the magnifier supplies a consistent view that supports efficient workflows. Simple specification and accessible technical support The instrument focuses on essential optical performance without unnecessary complexity, which simplifies maintenance and integration into daily inspection routines. If further technical data or application advice is required, Metav Werkzeuge supplies detailed information and practical guidance; their experts are reachable by email or telephone for specification queries and ordering support (info@metav-werkzeuge.com, +49 2822 7131930). Contact Metav Werkzeuge today for tailored advice and to secure the Euromex Achromatic Magnifier 10x for precise inspection tasks Technical data Article number: PB.5032 Name: Achromatic Magnifier 10x Product type: Magnifier Manufacturer: Euromex Facts Magnification: 10× Special features Achromatic lens Handheld design Suitable for inspection and hobby microscopy Brand: Euromex FAQ What magnification does the magnifier provide? The Euromex Achromatic Magnifier 10x (SKU PB.5032) offers 10× magnification with an achromatic optical system to reduce chromatic aberration. Is the loupe suitable for industrial inspection? Yes, the loupe is designed for visual inspection tasks and quality checks in workshop and light industrial environments. Does the magnifier include integrated lighting? No integrated lighting is specified for this magnifier in the supplied product data. Can the tool be used for hobby microscopy and jewellery inspection? The optical correction and 10× power make the magnifier suitable for hobby microscopy, jewellery appraisal and other fine-detail inspection work. Manufacturer: Euromex Microscopen bv; Typograaf 8; 6921 VB Duiven; The Netherlands; info@euromex.com
10x Magnifying Handheld Loupe, Hand Grip - Euromex
Benefit from 10× magnification and a practical handle for precise visual checks; the compact design supports quick inspection tasks and careful hobby work. Order the hand magnifier directly via Metav Werkzeuge or ask our consultants for suitability and delivery options. Hand Magnifier 10x – Hand-held magnifier by Euromex Hand Magnifier is a handheld inspection lens with an integrated handle, designed for close visual inspection and general detail work across workshops and hobby applications 10× magnification for fine detail Ergonomic handle for steady grip Lightweight and portable inspection tool Improved inspection accuracy with clear 10× magnification The 10× magnification delivers a tangible increase in visual detail compared with standard reading lenses, making small features and markings easier to examine. The lens supports precise visual inspection tasks in quality control, component checks and craftwork by enlarging details without digital assistance. Thanks to enhanced optical clarity, fewer assumptions are required during inspection, which reduces rework and speeds decision-making. The magnification factor is a direct, measurable aid to accuracy and is especially useful where fine detail dictates the outcome. Comfortable handling for longer tasks and steady viewing A built-in handle provides a steady grip that helps stabilise the lens during close work, reducing hand tremor effects and allowing sustained observation. The balanced design of this hand magnifier supports comfortable posture during prolonged use, which in turn diminishes eye strain and fatigue. For practical workflows, the simple hand-held format enables rapid transfer between stations and quick spot checks without set-up. This combination of ergonomics and portability makes the device suitable for routine inspections and hobby tasks where speed and steadiness are important. Simple care, broad suitability and sensible integration The inspection lens requires minimal maintenance: occasional cleaning with a lint-free cloth preserves optical clarity, and safe storage prevents scratches. Its compact, hand-held format integrates seamlessly alongside other bench tools and visual aids, allowing easy inclusion in inspection kits or toolboxes. The lens functions as a practical first-line device for rapid checks before committing to more complex measurement tools, thereby streamlining workflows and improving overall throughput. For buyers seeking reliable, straightforward visual enhancement, this magnifier is an efficient, low‑complexity choice. Contact Metav Werkzeuge to discuss the Euromex hand magnifier 10× and receive tailored advice on suitability and delivery from our Emmerich-based team Technical data Article number: PB.5021 Brand: Euromex Type: Hand magnifier Facts Magnification: 10× Cross-sell SKU: PB.5022 Special features Handle included Hand-held inspection tool Suitable for visual inspection and hobby tasks FAQ What magnification does the magnifier provide? The Euromex hand magnifier offers 10× magnification, suitable for detailed visual inspection and close work. Is the magnifier handheld or stand-mounted? This is a handheld inspection magnifier with an integrated handle for steady use during spot checks. Can the magnifier be used for quality control tasks? Yes, the magnification and clear optics support quick visual checks in quality control and component inspection. Does the product require special maintenance? Routine care consists of gentle cleaning with a lint‑free cloth to maintain optical clarity and avoid scratches. Which SKU identifies this product? The product is listed under SKU PB.5021 and is associated with cross-sell SKU PB.5022 Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, Nederland, info@euromex.com
10x Magnifying Loupe, Handheld Inspection Glass - Euromex
Compact 10× magnification for precise visual inspection and simple handling; ideal for detailed quality checks in workshops and inspection benches. Benefit from Euromex optical quality paired with the procurement support of Metav Werkzeuge — order directly via Metav or request tailored advice for metrology workflows. Measuring Magnifier 10× — Euromex hand loupe with 10× magnification for inspection tasks The Measuring Magnifier 10× delivers high-magnification visual control in a compact format for inspection and measurement-related visual checks 10× magnification for detailed inspection Compact format for bench and field work Suitable for visual metrology applications Confident inspection through clear 10× magnification The core advantage is the 10× magnification, which enables close visual assessment of fine details during inspection work. With high magnification, small surface defects, printed circuit traces and fine graduations on meters become visibly distinct, supporting more reliable decisions in quality control. This optical aid reduces interpretation errors and streamlines visual checks, contributing to a more efficient inspection routine while maintaining a factual, tool-centred explanation of benefit. Easy integration into measurement processes As a compact measuring magnifier, this loupe supports quick checks on the workshop bench or inside an assembly line station. Its simple handling reduces changeover time between visual checks and mechanical measurement tools, improving throughput. For teams managing mixed measurement tasks, the loupe provides an immediate, low-effort method to verify details before committing to further machining or rejection decisions, thus contributing to smoother workflows and measurable time savings. Designed for durable, everyday use in inspection settings Although compact in appearance, the loupe is conceived as a practical tool for repetitive visual tasks in production and service environments. The optical design focuses on clarity and repeatability, which helps maintain consistent inspection standards across shifts. Where traceable visual confirmation is required prior to dimensional measurement, the loupe serves as a reliable first-step instrument that complements standard metrology equipment and documented inspection procedures. Procurement and service that reduce risk Sourcing from an established brand such as Euromex and via a reliable partner streamlines supply and after‑sales considerations. Metav’s distribution approach emphasises consistent availability and a broad selection of precision tools, reducing the likelihood of supply disruptions and lowering the administrative effort for procurement. For complex requirements or additional technical parameters, straightforward advisory contact is available to clarify suitability for specific inspection tasks. Contact Metav Werkzeuge for procurement and technical advice on this Euromex measuring magnifier — Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany; info@metav-werkzeuge.com; +49 2822 7131930 Technical Data Article number: PB.5046 UID: PB.5046 Label: Mess- Lupe 10x Manufacturer: Euromex Facts Magnification: 10× Special features Product type: Magnifier Brand: Euromex SKU: PB.5046 FAQ What magnification does this loupe provide? The Euromex measuring magnifier offers 10× magnification, suitable for close visual inspection and preparatory checks before dimensional measurement. Is the magnifier suitable for workshop inspection tasks? Yes, the magnifier is intended for visual inspection applications and complements metrology tools in workshop and bench environments. How is this product identified for ordering? The order reference is PB.5046; the label reads Mess- Lupe 10x and the brand is Euromex. Manufacturer: Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
10x Plan Infinity-Corrected IOS Objective 0.25 NA 20.2mm Working Distance No Cover Glass Correction - Euromex
Take advantage of the combination of high-precision optics, an extended working distance and straightforward integration for consistent material science imaging. Order the objective directly via Metav Werkzeuge or consult Metav's specialists for compatibility and supply. Plan PLMi 10x/0.25 – Infinity-corrected Plan objective for bScope material science, 20.2 mm working distance (Euromex) A Plan PLMi 10x/0.25 objective engineered for brightfield material science on bScope configurations, offering an extended working distance and no cover-glass correction for bulk sample inspection. Plan infinity-corrected 10x objective Numerical aperture 0.25 for crisp contrast 20.2 mm working distance for bulky samples Optimised for bScope brightfield applications High‑precision optics for reliable material analysis The optical design combines Plan correction with an infinity‑corrected tube system to deliver a flat field across the image plane and minimise edge aberrations. With 10x magnification and a 0.25 numerical aperture, the lens balances depth of field and resolution to reveal surface structure and micro‑features in metallographic and materials research. The absence of cover‑glass correction simplifies imaging of thicker or uneven samples, while the Plan design supports consistent results across the field of view. Practical advantages for laboratory workflows An extended working distance of 20.2 mm enables comfortable access to samples, fixtures and probes during inspection and enables imaging of components mounted in holders or under slight topography. The optical parameters are selected to improve contrast under brightfield illumination and to reduce the need for frequent refocusing when examining variable specimen heights. The objective’s specifications support reproducible results in routine quality control and documentation tasks, reducing cycle time for inspection runs. Compatibility and straightforward integration The lens is specified for bScope material science systems and is supplied by a recognised optics manufacturer, ensuring mechanical and optical compatibility with standard turret mounts and infinity‑corrected microscope tubes. The combination of Plan correction, infinity design and the specified working distance makes integration into existing brightfield setups uncomplicated, supporting both manual and semi‑automated inspection processes. For laboratories seeking predictable imaging performance, this objective offers a clear technical match to common materials‑analysis requirements. Contact Metav Werkzeuge for tailored advice on integrating this Euromex objective into existing bScope installations; Metav’s precision team in Emmerich can confirm compatibility, delivery options and supply. Technical data Article number: BS.8110 Manufacturer: Euromex Product type: Objective / Lens Model series: bScope Label: Plan PLMi 10x/0.25 infinity-corrected, brightfield, no cover-glass correction Facts Magnification: 10x Numerical aperture: 0.25 Working distance: 20.2 mm Special features Infinity-corrected optical design Plan correction for flat field imaging Compatibility: bScope material science configurations FAQ What magnification and numerical aperture does this objective provide? The objective offers 10x magnification with a 0.25 numerical aperture, combining moderate resolution with increased depth of field suitable for many materials tasks. Is the objective suitable for samples without a cover glass? Yes, the Euromex objective is specified without cover‑glass correction, making it suitable for thicker or unmounted samples common in material science inspection. How does the 20.2 mm working distance affect sample handling? A 20.2 mm working distance provides extra clearance for fixtures and probes, facilitating handling of bulk samples and easing focus adjustments during inspection. Can this objective be used in other microscope systems besides bScope? The lens is designed for infinity‑corrected brightfield systems; compatibility with other models depends on the tube lens and mechanical mount — Metav Werkzeuge can advise on integration options. What imaging advantages does Plan correction bring for materials analysis? Plan correction delivers a flat field with reduced edge distortion, improving uniformity across the image and aiding accurate measurement and visual assessment of surface features. Euromex Microscopen bv, Typograaf 8, 6921 VB Duiven, The Netherlands; info@euromex.com
See microstructure clearly for decisive quality control
A metallographic microscope (also referred to as a metallurgical microscope or inspection microscope) is an indispensable optical precision instrument in metallography. It renders the microstructure of metals and alloys visible at high magnification and forms the essential link between physical sample preparation and materials‑science assessment.
How the system works in the lab
Metals are opaque to transmitted light, so inspection is performed using reflected‑light techniques. The setup comprises an illumination system that directs light through a beam splitter onto the prepared surface, a high‑quality objective that provides the primary magnification and resolution, and a tube with an eyepiece for visual inspection. Image quality is governed primarily by the objective’s numerical aperture, which determines the resolving power for fine structural details. Integration with a digital camera and specialised evaluation software enables accurate imaging, documentation and norm‑compliant measurement of grain size, phase fractions and microdefects.
Practical benefits for production and quality assurance
In industrial quality control the microscope provides measurable outcomes that reduce risk and save time:
- improved detection of inclusions, pores and micro‑cracks, lowering the chance of in‑service failure
- reproducible grain‑size and phase analysis (ferrite, pearlite, martensite) through calibrated imaging and software tools
- faster throughput in inspection routines, reducing sample turnaround and non‑productive downtime
- enhanced traceability by saving images and measurement reports to support audits and batch acceptance
Why Metav is the pragmatic partner for microscopes
Metav combines decades of metrology expertise with a broad range of inspection solutions, acting as a quality filter for the european market from its base in Emmerich. With over 48,000 customers and more than 250,000 products, Metav offers a single, reliable source for microscopes, camera systems and evaluation software, ensuring consistent supply and professional advice for industry and workshops.
FAQ
Which inspection tasks are best suited to a metallographic microscope?
A metallographic microscope is ideal for analysing grain size, identifying microstructural phases such as ferrite, pearlite and martensite, and detecting microscopic defects like inclusions, pores or cracks that may affect mechanical integrity.
How does numerical aperture affect image quality?
The objective’s numerical aperture directly influences resolution and contrast; higher numerical aperture allows the microscope to resolve finer features in the sample microstructure, which is critical for accurate phase identification and defect sizing.
Can I connect a camera and perform automated measurements?
Yes. Modern metallographic microscopes can be paired with a digital camera and evaluation software to capture images, perform calibrated measurements and generate reproducible, norm‑compliant reports for documentation.
What should I consider when choosing objectives for metallurgical work?
Select objectives with appropriate magnification and high numerical aperture, compatible with reflected‑light illumination and the intended measurement standards; quality optics minimise artefacts and improve repeatability of results.
Does Metav supply complete inspection solutions for workshops?
Metav supplies microscopes, camera systems and software as part of a comprehensive product range, backed by decades of expertise and a commitment to reliable delivery from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com