Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of precise 90° geometry, a compact 16 mm shank and compatibility with BOMT 1304 indexable inserts for reliable, low-downtime machining; order the corner tool head directly via Metav Werkzeuge or contact their consultants for tailored advice. Corner tool head 90° for BOMT 1304 indexable inserts — Teknik Makina, compact 16 mm shank The corner tool head provides orthogonal cutting for milling and turning applications, designed to accept BOMT 1304 indexable inserts for stable edge engagement in small, high‑precision set-ups 90° cutting angle for orthogonal machining Compatible with BOMT 1304 inserts (Ingersoll) 16 mm shank; compact 40 mm overall length Torx fastening M3.5x8.5, key T10 Consistent geometry for repeatable precision The compact design with a 90° cutting angle ensures a controlled cutting direction and predictable chip evacuation, which is particularly beneficial for short‑overhang set‑ups. The solid 16 mm shank supports torsional rigidity and reduces vibration, so the tool path is maintained and surface finish is improved. By keeping the toolholder geometry stable, tool life of the insert is extended and cycle times remain consistent — a rational investment in process stability rather than guesswork. Technical terms: the 90° angle means the cutting edge meets the workpiece at right angles, helping to simplify tool offsets and program routines on CNC machines. Fast insert changes and straightforward integration Compatibility with BOMT 1304 indexable inserts and a single M3.5x8.5 Torx screw secured with a T10 key enables quick insert replacement and secure clamping. This reduces machine downtime during tool changes and simplifies inventory management when BOMT 1304 inserts are already in use. The head is supplied ready for direct mounting on a 16 mm holder bore, so set‑up time is minimised and integration into existing tool assemblies is uncomplicated. Clear maintenance routines can be established because insert replacement and screw torque are standardised. Robust compatibility and operational benefits Designed to accept four cutting edges and to mate with Ingersoll‑type inserts, the holder offers pragmatic benefits for workshops seeking repeatable results with common insert families. The compact 40 mm overall length is advantageous in confined tool zones, while the construction provides reliable seating and clamping of the insert to preserve precision over repeated cycles. For production environments, this means fewer unplanned stops and a smoother production flow — a practical contributor to overall equipment effectiveness. The component is suitable where orthogonal cutting with small‑format holders is specified and where a compact assembly reduces interference. For tailored procurement or application advice on this Teknik Cutting Tools corner tool head (SKU T965TM), contact Metav Werkzeuge in Emmerich for availability and fast delivery: info@metav-werkzeuge.com, +49 2822 7131930 — Metav’s consultants will assist with selection and logistics. Technical Data Article number: T965TM Product: Corner tool head 90° for BOMT 1304 indexable inserts Manufacturer: Teknik Makina Dimensions & Weight Shank diameter: 16 mm Diameter: 40 mm Total length: 40 mm Weight: 0.272 kg Cutting angle: 90° Cutting edges: 4 Features & Compatibility Compatible with BOMT 1304 indexable inserts Suitable for Ingersoll insert systems Torx screw M3.5x8.5; Torx key T10 Compact design for reduced overhang FAQ Which inserts fit this tool head? The corner tool head is compatible with BOMT 1304 indexable inserts and is designed to accept Ingersoll‑type BOMT 1304 inserts. What is the required shank diameter for mounting? Mounting requires a 16 mm shank bore; the holder is optimised for a 16 mm clamping diameter. How is the insert secured in place? The insert is clamped with an M3.5x8.5 Torx screw tightened using a T10 key to ensure secure seating. Is the holder suitable for confined tool arrangements? Yes; the compact 40 mm overall length and 16 mm shank make the holder well suited to installations with restricted clearance. What is the SKU and who manufactures the part? The SKU is T965TM and the part is supplied by Teknik Makina; Metav Werkzeuge can provide delivery and procurement support. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity, precise insert compatibility and extended reach to maintain consistent machining results; order the S32T SVQBR directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar S32T SVQBR – Toolholder for VBMT 1604, 32 mm shank (Teknik Makina) The S32T SVQBR is a right-hand boring bar designed for secure use with VBMT 1604 indexable inserts, optimised for operations requiring stability and repeatable positioning in confined bores and overhang work. 32 mm shank for stable clamping 50 mm insert height for robust cutting 300 mm overall length for deep reach Compatible with VBMT 1604 inserts Built for rigidity and precise chip control The S32T SVQBR combines a sturdy 32 mm shank with a balanced mass of 1.79 kg to deliver enhanced rigidity during cutting. This construction reduces vibration and deflection, which directly improves surface finish and dimensional repeatability when using indexable inserts. Compatibility with VBMT 1604 inserts ensures a wide selection of grades and edge geometries, allowing process engineers to tailor tool life and cutting performance for specific production runs. The documented 107.5° cutting angle supports reliable chip formation and predictable cutting forces, which simplifies machining parameter selection and shortens setup time. Access deeper bores without sacrificing stability With a 300 mm overall length and a compact head-to-shank profile, the bar is designed for access to deeper features while maintaining the stability needed for accurate internal and external operations. The right-hand cutting orientation suits standard turning cycles and provides a consistent force direction that aids fixture and clamping design. A well-dimensioned boring bar minimises chatter and allows higher feed rates where process windows permit, delivering improved throughput and lower cycle variation. Where tool-path planning and machine rigidity are coordinated, the component’s geometry supports efficient material removal with fewer insert changes. Practical workshop benefits and straightforward handling The toolholder’s design focuses on operational efficiency: insert changes are compatible with the common VBMT 1604 format, reducing inventory complexity and downtime. The 50 mm insert height offers a robust cutting edge engagement, which benefits repetitive production and interrupted cuts by increasing edge support. The combination of secure clamping and proven geometry makes the bar suitable for series production and precision one-off tasks alike. Documentation and SKU traceability support quality management systems, helping maintain consistent tooling specifications across production lines. Contact Metav Werkzeuge today for technical advice on integrating the Teknik Makina S32T SVQBR into production; our specialists at Metav Werkzeuge are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss process fit and delivery options. Technical Data Article number: K219TM ISO designation: S32T SVQBR Product type (EN): SVQB for VBMT Indexable Inserts Manufacturer: Teknik Makina Numbers Shank diameter: 32 mm Overall length: 300 mm Weight: 1.79 kg Cutting angle: 107.5° Insert height: 50 mm Diameter: 40 Special features Right-hand cutting direction For VBMT 1604 indexable inserts Compatible with standard indexable insert grades Designed for improved rigidity and chip control Balanced for longer reach operations FAQ What insert type fits this boring bar? The S32T SVQBR is designed for VBMT 1604 indexable inserts, permitting the use of standard grades and edge preparations for varied applications. Is this tool suitable for deep internal boring? Yes, the 300 mm overall length and robust shank provide extended reach for deeper features while maintaining stability for accurate machining. Which cutting direction does the bar support? The bar is configured for right-hand cutting, matching conventional turning cycles and offering consistent force direction during operations. How does the cutting angle affect performance? The 107.5° cutting angle promotes controlled chip formation and stable cutting forces, which assists in achieving repeatable surface finish and dimensional accuracy. What are the handling advantages in a production environment? Compatibility with common VBMT 1604 inserts reduces tooling variants, while the secure clamping and 50 mm insert height support robust cutting and reduced downtime during insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a compact 40×40 mm clamping cross-section and a 36 mm cutting height delivers consistent thread geometry and reduced set-up time; the 200 mm overall length adds reach for deeper operations. Order the holder through Metav Werkzeuge or consult the Metav team for technical guidance to ensure immediate integration into the production line. Clamping holder SER 4040 — Right‑hand external threading, 40×40 mm (Teknik Makina) The Clamping holder SER 4040 is a right‑hand tool holder for external threading, designed for use with 22 ER indexable inserts and compatible with R22‑ER22 shanks for lathe turning applications 40×40 mm clamping cross-section 200 mm overall length for extended reach Compatible with 22 ER indexable inserts Torx T15 screw M4×15 for secure clamping Accurate thread geometry through fixed cutting height The holder’s 36 mm cutting height and square 40×40 mm cross-section ensure that the insert aligns precisely with the lathe centre, reducing the need for repeated adjustments. A correct cutting height matters because it preserves the intended rake and clearance angles of the insert, which in turn improves thread profile accuracy and extends insert life. For workshops that value repeatability, this fixed geometry reduces set‑up time and minimises scrap rates, delivering measurable improvements in throughput and process stability. Robust reach and stability for demanding turning tasks With an overall length of 200 mm and a mass of 2.585 kg, the holder offers the solidity required for deeper external threading without excessive vibration. The mass and form factor contribute to improved damping during cutting, which helps maintain surface finish and prolong tool life when machining steels and similar workpiece materials. The square shank form also simplifies clamping in standard tool posts and cross‑slides, making the holder suitable for both production lathes and heavy‑duty workshop machines where stability under load is essential. Fast, secure clamping and broad compatibility Designed for use with 22 ER indexable inserts and the R22‑ER22 shank designation, the holder supports quick insert changes and precise repositioning. Retention is accomplished with a Torx T15 screw (M4×15), providing consistent clamp force and straightforward maintenance. Included component references such as TA062 for the support plate and BSP010 as a shim simplify replacement part sourcing. As a right‑hand external threading holder, it enables conventional thread cutting directions and is well suited to production environments that require reliable, repeatable external threads. For reliable external threading with secure clamping, contact Metav Werkzeuge for ordering or detailed technical advice on the Teknik Makina clamping holder SER 4040 — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: D507TM ISO designation: SER 4040 Manufacturer: Teknik Makina ECLASS: 21181004 Core data Clamping cross-section: 40×40 mm Cutting height: 36 mm Overall length: 200 mm Weight: 2.585 kg Cutting direction: right Special features Compatible with 22 ER indexable inserts Shank designation: R22‑ER22 Torx screw: T15 Screw size: M4×15 Support plate reference: TA062 Shim reference: BSP010 FAQ Which inserts fit the holder? The holder is designed for 22 ER indexable inserts; the geometry and clamp position match this insert standard for secure, repeatable threading. Is the holder suitable for right‑hand threading only? Yes, the tool is configured for right‑hand external threading and should be paired with inserts and lathe orientation that follow conventional right‑hand cut direction. What shank or boring bar designation is required? The holder fits shanks with the R22‑ER22 designation, ensuring correct engagement in compatible tool posts and boring bar setups. How is the insert secured and what tools are needed? Insert retention uses a Torx T15 screw (M4×15); a T15 Torx driver ensures consistent tightening and safe clamping performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise 90° geometry and secure 16 mm shank for consistent turning results; the compatibility with APMT 1604 indexable inserts and Korloy grades ensures simple tool change and broad material coverage — order via Metav Werkzeuge or consult our specialists for process-matched advice. Corner tool head T241TM — 90° turning head for APMT 1604 indexable inserts (Teknik Makina) Corner tool head T241TM for turning and facing operations, designed to accept APMT 1604 indexable inserts and to fit tool posts with a 16 mm shank 90° cutting angle for precise turning Compatible with APMT 1604 inserts 16 mm shank for secure clamping Torx fixing M4x10 with T15 key Consistent cutting geometry for repeatable results The 90° cutting angle of this turning head delivers defined contact conditions between insert and workpiece, which helps to maintain a stable cutting line and predictable chip flow. Fitting APMT 1604 indexable inserts means the insert seating and rake geometry are standardised, so set-up times are reduced and tool life can be managed more reliably. The head’s compact form factor and standardised interface make it suitable for small to medium turning tasks in production and maintenance environments, where repeatability and setup speed are central to efficiency. Secure mounting and quick insert changes A 16 mm shank diameter provides a robust connection to the tool holder or turret, reducing vibration and improving surface finish when the assembly is correctly clamped. The insert is secured with a M4x10 Torx screw, accessed with a T15 key, enabling rapid insert replacement without special tooling. For workshop personnel unfamiliar with indexable tooling: the screw size defines the clamping torque range and the Torx drive reduces the risk of cam-out, which contributes to consistent clamping force and longer service life of the fastening elements. Practical compatibility and application range Engineered for use with APMT 1604 inserts from major suppliers such as Korloy, this head supports common grades used for steel, stainless steel and cast materials; selecting the correct insert grade and geometry will determine performance on specific materials. The tool head’s Ø40 mm footprint and 45 mm overall length keep clearance requirements modest while still providing four usable cutting edges per insert, which is economical for batch work. The recorded mass of 0.258 kg reflects a compact design that is easy to handle during tool changes and inventory management. Why this holder suits a modern workshop Using standardised insert formats and conventional fastenings simplifies procurement and stocking: a workshop can keep a small range of insert grades and rely on the same basic holder geometry across multiple machines. The combination of a clear 90° geometry, a 16 mm interface and Torx clamping delivers a balance of precision, serviceability and robustness — attributes that support throughput and reduce unexpected downtime. For process planners, this means fewer variables to adjust during set-up and more consistent part quality from the first piece. Consult Metav Werkzeuge for tailored holder recommendations and swift supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T241TM Manufacturer: Teknik Makina For: APMT 1604 indexable inserts Compatible insert manufacturer: Korloy Core measurements Diameter: 40 mm Overall length: 45 mm Shank diameter: 16 mm Weight: 0.258 kg Cutting angle: 90° Cutting edges: 4 Features & fittings Torx screw: M4x10 Torx key: T15 Accepts APMT 1604 inserts Compact turning head design FAQ What insert format does this turning head use? The head is designed for APMT 1604 indexable inserts and seats standard APMT plates for a reliable fit. Is the holder compatible with Korloy inserts? Yes, the design is compatible with inserts from Korloy as indicated in the product specification for T241TM. What toolholder connection is required? The turning head has a 16 mm shank diameter and is intended for tool posts or turrets that accept this dimension. How is the insert secured? Insertion is secured by a M4x10 Torx screw, tightened with a T15 key for consistent clamping force. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact 40 mm face mill with three cutting edges and a 16 mm shank for stable, efficient machining; take advantage of its quick insert changes and robust fastening system — order the Round Insert Milling Cutter T288TM directly via Metav Werkzeuge or ask our consultants if needed. Round Insert Milling Cutter T288TM – Ø40 mm, 3 cutting edges | Teknik Makina The Round Insert Milling Cutter T288TM is a compact milling tool designed for face milling operations using round indexable inserts, ideal for short overhangs and demanding, repeatable cuts. Ø40 mm cutting diameter 3 cutting edges for steady material removal Compatible with RDMT 1003 indexable inserts 16 mm shank and 40 mm overall length Increased rigidity for precise small-scale milling The cutter was engineered to deliver consistent results in constrained setups: its 16 mm shank and 40 mm overall length reduce deflection and vibration during machining, which leads to improved surface quality and repeatability. The moderate mass (0.208 kg) provides a balance between stability and low spindle load, so cycle times are kept efficient without compromising control. Efficient cutting concept with easy insert handling With an Ø40 mm tool diameter and 3 cutting edges, the design focuses on optimised chip load per tooth and smooth power draw. The head accepts RDMT 1003 indexable inserts, which are widely available and allow cost-effective regrinding or replacement. This approach reduces downtime: worn edges are replaced rather than the whole tool, improving tool-cost ratio in serial production. Fast clamping and maintenance for high uptime Insert retention and replacement are straightforward thanks to standardised fastenings. The clamping screw is M3.5, the torx screw specification is M3.5x8.5, and the tool is supplied for tightening with a T15 Torx key. These standard sizes permit quick tool changes with commonly available tools, reducing maintenance time and keeping spindle availability high — a clear operational benefit for lean workflows. Compact suitability for focused face-milling tasks The cutter is tailored for operations where space is at a premium but precision remains essential. Its geometry and three-flute layout support stable cutting in short-reach milling and light to medium material removal rates. For workshops and CNC cells that favour indexable round inserts for flexibility and cost management, this tool provides a compact, dependable option that integrates easily into existing tool sets. For precise compact milling tasks, request the Teknik Makina T288TM via Metav Werkzeuge — contact Metav’s specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical advice and order guidance. Technical Data Article number: T288TM Manufacturer: Teknik Makina For: RDMT 1003 Indexable Inserts Core specifications Diameter: 40 mm Cutting edges: 3 Overall length: 40 mm Shank diameter: 16 mm Weight: 0.208 kg SKU: T288TM Special features Compatible with RDMT 1003 indexable inserts Clamping screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Compact design for short overhangs FAQ How does the cutter secure the indexable inserts? The cutter uses a clamping screw (M3.5) and a torx screw (M3.5x8.5) to retain RDMT 1003 inserts securely; the retention system on the T288TM is designed for straightforward replacement and stable seating. Is the tool suitable for CNC finishing passes? Yes, the three-edge layout and compact geometry of the T288TM make it suited to controlled finishing and light material removal where surface quality and stability matter. What is the shank size and why does it matter? The shank diameter is 16 mm; a thicker shank relative to overall length helps reduce runout and vibration, improving precision and tool life in short-reach milling operations. Can common Torx tools be used for insert changes? Insert changes are performed with a standard T15 Torx key and M3.5 screws, enabling quick maintenance using widely available toolsets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of a 40 mm cutting diameter, four cutting edges and compatibility with RDMT 1003 indexable inserts provides efficient material removal with predictable tool life; order the round insert milling cutter directly via Metav Werkzeuge or ask the consultants for holder recommendations and spare‑part guidance. Round insert milling cutter T289TM — 40 mm diameter, 4 cutting edges, for RDMT 1003 indexable inserts (Teknik Makina) The Round insert milling cutter T289TM is a compact indexable‑insert cutter designed for productive face milling and light slotting operations where quick insert changes and stable cutting are required. 40 mm cutting diameter Four cutting edges for balanced cuts Compatible with RDMT 1003 inserts Ø16 mm shank for standard holders Stable removal rates and consistent surface quality With a 40 mm diameter and four cutting edges, this milling cutter delivers a balanced cutting action that reduces vibration and supports steady chip formation. The geometry of the tool head is designed to distribute cutting forces across multiple edges, which helps to maintain tool balance during higher feed rates. Reduced vibration contributes to improved surface finish and repeatable results in series production, making the tool suitable for shops aiming for consistent output and lower scrap rates. The cutter’s modest 0.22 kg weight also reduces spindle load and inertia during acceleration and direction changes. Fast insert changes that cut downtime The T289TM accepts RDMT 1003 indexable inserts, enabling rapid replacement of worn cutting edges rather than full‑tool changes. Indexable inserts keep running costs predictable and minimise inventory of complete cutters; only the small inserts are stocked and replaced. The insert system is particularly useful for operations with frequent tool wear cycles, as insert swap‑outs are quick, require minimal setup time and reduce machine downtime compared with solid tools. This approach supports efficient production planning and a lower total cost of ownership for repetitive milling tasks. Secure clamping and straightforward mounting A secure interface is provided by a Ø16 mm shank, which fits standard collets and holder systems, and by the specified fastenings: locking screw M3.5, Torx screw M3.5x8.5 and Torx key size T15. These details ensure that the cutting head remains rigidly fixed during machining, reducing axial play and improving positional accuracy. The defined fastener sizes simplify maintenance and spare‑part procurement: a T15 driver is sufficient for insert changes and routine checks, and the standard screw sizes match common workshop tool sets. Integration into production and supplier assurance Designed for use with RDMT 1003 inserts, this indexable cutter integrates easily into existing tool plans and holder inventories. Its standardised dimensions make it straightforward to fit into modular tool systems without extensive requalification. For procurement, Metav Werkzeuge provides a central source in Europe with a broad selection of metrology and tooling products; the Emmerich site acts as a quality filter and logistics hub, supporting reliable supply and consistent product quality for industrial and trade customers. For fast, reliable adaptation to indexable‑insert milling, contact Metav Werkzeuge for technical advice on the T289TM round insert milling cutter and suitable holder options at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: T289TM Manufacturer: Teknik Makina Name: Rundplattenfräser / for RDMT 1003 Indexable Inserts Facts Diameter: 40 mm Cutting edges: 4 Overall length: 40 mm Shank diameter: Ø16 mm Weight: 0.22 kg Torx screw: M3.5x8.5 Locking screw: M3.5 Torx key: T15 Special features Compatible inserts: RDMT 1003 Suitable for indexable‑insert milling eClass: 21180902 ETIM: EC011860 SKU: T289TM FAQ Which insert type fits this cutter? The cutter accepts RDMT 1003 indexable inserts; this compatibility is specified for the T289TM from Teknik Makina. How many cutting edges does it have and what is the diameter? The tool is equipped with four cutting edges and a 40 mm cutting diameter. What is the shank size and how does that affect holder choice? The shank diameter is Ø16 mm; holders and collets matching this diameter are required for secure mounting. Which fasteners and driver are specified for insert clamping? Insert clamping uses a locking screw M3.5 and a Torx screw M3.5x8.5; the corresponding driver size is T15. Can this cutter be used with existing indexable insert inventories? Yes — compatibility with RDMT 1003 inserts allows integration with systems already using that insert type, simplifying tooling management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, high-performance solution with a Ø40 mm cutting diameter and 4 cutting edges that keeps cycle times low and tool changes efficient; order this indexable round milling cutter via Metav Werkzeuge or contact the consultants for technical guidance. Indexable round milling cutter – Ø40 mm, 4 cutting edges by Teknik Makina The Indexable round milling cutter is a compact, indexable tool designed for medium-duty milling with RDMT 12T3 inserts, suited to general workshop and light production environments Ø40 mm cutting diameter, 4 cutting edges Compatible with RDMT 12T3 indexable inserts 16 mm shank for secure toolholder fit Torx T15 clamping with M3.5x8.5 screws Reliable throughput from a compact design The cutter has been engineered to maintain steady productivity in confined setups. With a Ø40 mm diameter and 4 cutting edges, the tool offers balanced material removal while reducing vibration compared with single-edge alternatives. The combination of compact dimensions and multiple cutting edges results in shorter machining cycles and consistent chip evacuation, which translates into improved production throughput and less time spent on secondary operations. The slim profile is particularly advantageous where spindle clearance or compact fixtures limit tool choice. Secure clamping for repeatable accuracy A focus on clamping integrity ensures repeatable results part after part. The head is retained with a M3.5 locking screw and a Torx M3.5x8.5 fastening bolt, tightened using a T15 key, providing secure insert fixation and straightforward maintenance. This arrangement reduces the risk of insert movement under load, so concentricity and surface finish remain stable across batches. Clear, standardised fastening parts make replacement and workshop servicing quick and reliable. Broad compatibility with industry-standard inserts Designed for use with RDMT 12T3 indexable inserts, the cutter offers flexibility across common grades and geometries. The indexable system enables rapid edge changes without regrinding, lowering running costs and downtime. Where different materials demand different insert grades, the cutter accepts established insert sizes, allowing compatibility with existing inventory and simplifying tool management across the shop floor. Compact shank and handling benefits With a 16 mm shank and a measured weight of 0.236 kg, the tool combines rigidity with easy handling during setup. The reduced mass helps to limit centrifugal forces at moderate spindle speeds while the standard shank diameter supports secure seating in collets and toolholders. These characteristics help to preserve spindle bearings and maintain concentric performance over prolonged use, contributing to cost-effective operation and predictable machining results. Contact Metav Werkzeuge for availability and detailed technical advice on the Teknik Makina indexable round milling cutter (SKU T281TM) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T281TM Brand: Teknik Makina Designation: Indexable round milling cutter for RDMT 12T3 inserts ECLASS: 21180902 ETIM: EC011860 Facts Diameter: 40 mm Cutting edges: 4 Overall length: 40 mm Shank diameter: 16 mm Weight: 0.236 kg Special features Compatible with RDMT 12T3 indexable inserts Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 SKU: T281TM FAQ What insert type does this cutter use? The tool is compatible with RDMT 12T3 indexable inserts; the cutter accepts standard insert geometries for flexible application. Is the cutter suitable for production runs? Yes, the indexable round milling cutter from Teknik Makina (SKU T281TM) is designed for repeatable performance in light to medium production due to its multiple cutting edges and secure clamping system. What are the shank and overall dimensions? The cutter features a 16 mm shank and an overall length of 40 mm, making it suitable for compact toolholder set-ups. Which fastening parts are required for insert clamping? Clamping uses a M3.5 locking screw and a M3.5x8.5 Torx screw, tightened with a T15 key, ensuring consistent insert retention. What typical applications suit this cutter? The tool is well suited to face milling, light profile work and semi-finishing operations where RDMT 12T3 inserts provide the required edge geometry and wear properties. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise compatibility with RHKW 0802 indexable inserts, a compact 40 mm diameter and a secure 16 mm shank for consistent steelworking performance; order the round insert milling cutter directly via Metav Werkzeuge or consult the specialists for application advice Round insert milling cutter (Rundplattenfräser) — 40 mm diameter, 16 mm shank (Teknik Cutting Tools) The round insert milling cutter (for RHKW 0802 indexable inserts) is engineered for compact, reliable steelworking and straightforward insert changes in production and workshop environments Compatible with RHKW 0802 indexable inserts 40 mm diameter for compact milling 16 mm shank for secure collet mounting Includes M3.5 clamp screw, M3x7 Torx screw and T15 key Reduce tooling variety while keeping machining performance high The combination of compatibility with RHKW 0802 indexable inserts and a compact 40 mm cutter diameter simplifies tooling logistics and lowers per-part costs through replaceable cutting edges. Using indexable inserts enables continued cutting performance without replacing the whole tool body, which translates into predictable tool costs and shorter spindle downtime. The cutter’s four cutting edges ensure continuous chip removal and a balanced cut pattern, which supports consistent surface finish and repeatability in batch production. Fast insert changes and dependable clamping to cut downtime Reliable clamping is central to quick tool service and repeatable results. This cutter is supplied with an M3.5 clamp screw and an M3x7 Torx screw, with a T15 Torx key for secure and rapid insert replacement. The 16 mm shank provides a secure interface with standard collets, reducing runout and vibration. At 0.247 kg and an overall length of 40 mm, the tool offers a compact mass that aids tool balance and handling during changeovers, helping to keep machine uptime high on busy production floors. Built for steelworking with industry-standard compatibility Designed with steelworking applications in mind, the tool accepts Ingersoll-compatible indexable plates and fits into existing setups that use RHKW 0802 inserts. The compact form factor and robust mounting allow access in tighter spaces while maintaining effective material removal rates. For workshops and manufacturing lines aiming to streamline inventory and maintain consistent quality, this cutter offers a practical blend of accessibility, proven insert technology and mechanical stability. For technical advice on Teknik Cutting Tools' round insert milling cutter (RHKW 0802) and assistance selecting the correct inserts and clamping configuration, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: T599TM Manufacturer: Teknik Makina Suitable for indexable inserts: RHKW 0802 Compatible insert manufacturer: Ingersoll ECLASS: 21180902 ETIM: EC011860 Dimensions & mass Diameter: 40 mm Cutting edges: 4 Shank diameter: 16 mm Overall length: 40 mm Weight: 0.247 kg Clamping & accessories M3.5 clamp screw M3x7 Torx screw Torx key T15 For RHKW 0802 indexable inserts Suited to steelworking FAQ Which inserts fit this cutter? The cutter is designed for RHKW 0802 indexable inserts; Teknik Cutting Tools’ round insert milling cutter (SKU T599TM) accepts those plates and is compatible with Ingersoll-style inserts. Can the cutter be used in confined workspaces? Yes, the 40 mm diameter and 40 mm overall length make this cutter suitable for tighter access situations where a compact tool body is needed. What clamping hardware is supplied? The tool comes with an M3.5 clamp screw, an M3x7 Torx screw and a T15 Torx key to ensure secure and quick insert changes for the round insert milling cutter. Is the shank suitable for standard collets? The 16 mm shank is intended for standard collet systems and provides a secure mounting for repeatable machining results with the T599TM cutter. Which applications is this cutter optimised for? This cutter is optimised for steelworking operations using indexable inserts; it offers reliable handling, quick insert changes and is appropriate for workshop and production use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, purpose-built cutter that combines reliable clamping, a Ø 40 mm cutting diameter and 4 cutting edges for efficient material removal; order directly via Metav Werkzeuge or contact the consultants for matching inserts and tool holders. Round Insert Cutter T602TM – 40 mm diameter, 4 cutting edges (Teknik Makina) The Round Insert Cutter T602TM is a compact milling head designed for indexable insert applications, optimised for medium-duty material removal with the RHKW 1003 insert family Compatible with RHKW 1003 inserts Ø 40 mm cutting diameter 4 cutting edges for steady material removal 16 mm shank for secure clamping Faster cycle times through efficient cutter geometry The tooling geometry of this round insert cutter focuses on reliable material removal and stable cutting conditions. With a Ø 40 mm diameter and 4 cutting edges, the tool spreads cutting forces across multiple flutes, reducing vibration and enabling higher feed per tooth without compromising surface quality. For production environments this translates into improved throughput and predictable cycle times, which supports tighter scheduling and consistent output. Robust clamping and quick insert changes Secure clamping is ensured by the combination of a 16 mm shank and a dedicated clamping arrangement. The insert is fixed with a M3,5 clamping screw and an additional M4x10 Torx screw tightened using a T15 key, which provides repeatable seating and simple maintenance. The clamping design reduces the risk of insert movement under load and allows rapid replacement of indexable inserts, keeping machine downtime to a minimum. Straightforward compatibility with RHKW 1003 indexable inserts Designed for use with RHKW 1003 indexable inserts—compatible with Ingersoll insert systems—the cutter simplifies inventory management by aligning with a widely used insert standard. Indexable inserts allow users to replace only the cutting grade rather than the whole tool, lowering tooling cost per part and enabling quick adaption to different materials or finish requirements without changing the tool body. Compact dimensions for flexible machining setups With an overall length of 40 mm and a weight of 0.243 kg, this cutter is suited to applications where tool overhang must be kept short. The compact form reduces bending moments and helps maintain concentricity at higher spindle speeds. Where space is restricted or where multiple tools are mounted close together, the modest length and mass of the unit improve accessibility and reduce runout-related quality issues. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools Round Insert Cutter T602TM fits into the tooling mix for your production; deliveries and technical pairing can be arranged directly from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T602TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Numbers / Core technical data Diameter: 40 mm Cutting edges: 4 Overall length: 40 mm Shank diameter: 16 mm Weight: 0.243 kg Special features / Versions Compatible with RHKW 1003 indexable inserts Compatible insert manufacturer: Ingersoll Clamping screw: M3,5 Torx screw: M4x10 Torx key: T15 FAQ Which inserts are compatible with this cutter? The cutter is designed for RHKW 1003 indexable inserts; Teknik Makina supplies the body sized for these inserts and the system is compatible with Ingersoll insert variants. What is the cutting diameter and how many cutting edges are there? The tool provides a Ø 40 mm cutting diameter and has 4 cutting edges, offering balanced cutting action for steady material removal. How is the insert secured in the cutter? Insert retention uses a M3,5 clamping screw plus a M4x10 Torx screw, tightened with a T15 key to ensure repeatable and secure seating on the cutter body. What shank size is required for mounting this tool? The cutter has a 16 mm shank (aufnahme 16 mm) and mounts in standard 16 mm tool holders or collars suitable for compact milling heads. Is the tool suitable for compact or space-restricted setups? Yes; the 40 mm overall length and 0.243 kg weight make the cutter well suited to reduced overhangs and tight machining arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of reach and rigidity: a 32 mm shank and 300 mm overall length provide extended access while maintaining stability for turning applications, and the 75° cutting angle together with CN-- 1204 compatibility ensures predictable chip control and economical tool life. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice. S32T DCKNR Boring Bar – DCKNR for CN-- 1204 Indexable Inserts, 32 mm shank (Teknik Makina) The S32T DCKNR is a right-hand boring bar designed for turning operations with CN-- 1204 indexable inserts, offering a combination of reach and stiffness for medium-length external machining tasks. S32T shank, 32 mm diameter Compatible with CN-- 1204 inserts 75° cutting angle for stable cuts 300 mm overall length for extended reach Rigidity and consistent contact for stable turning results The tool’s 32 mm shank and sturdy geometry deliver improved rigidity, reducing vibration during cuts and stabilising the tool–workpiece interface. A stable setup leads to more consistent surface finishes and repeatable dimensional results, which is crucial in production runs where tolerances matter. The relatively low mass at 0.966 kg lowers toolholder load without compromising stability, enabling longer tool life and fewer re‑set operations. Efficient use of indexable CN-- 1204 inserts Built to accept CN-- 1204 indexable inserts, the holder enables rapid insert changes and straightforward maintenance. Indexable inserts permit economical reuse of cutting edges and fast replacement in case of wear, reducing downtime compared with solid‑tool alternatives. The DCKNR style clamping secures inserts reliably, helping to maintain consistent cutting geometry and predictable performance across multiple shifts. Extended reach with controlled cutting direction With a 300 mm overall length and right-hand cutting orientation, the boring bar reaches deeper external profiles while preserving cutting control. The 75° cutting angle promotes favourable chip flow and cutting force distribution, which can lead to reduced chatter on longer overhangs. This configuration supports efficient cycle times by enabling higher material removal rates while keeping surface integrity intact. Industry-compatible designation and straightforward inventory management The S32T DCKNR ISO designation simplifies tool planning and procurement for workshops that standardise on DCKNR holders and CN-- 1204 inserts. The clear specification of shank diameter, cutting height and total length makes it easier to select the correct tool for a workpiece without lengthy compatibility checks. The lightweight construction yet precise dimensions help maintain a compact, well‑organised tooling inventory that supports predictable production planning. Contact Metav Werkzeuge for tailored application recommendations and secure supply of the Teknik Makina S32T DCKNR boring bar; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: K403TM Manufacturer: Teknik Makina Product designation: DCKNR for CN-- 1204 Indexable Inserts Facts Shank diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Weight: 0.966 kg Tool diameter: 40 mm Cutting angle: 75° Special features ISO designation: S32T DCKNR For indexable inserts: CN-- 1204 Cutting direction: Right Clamping designation: 12 SKU: K403TM FAQ Which inserts fit this boring bar? The S32T DCKNR boring bar is specified for CN-- 1204 indexable inserts and is clamped in the DCKNR style for secure seating. Is the cutting direction right-hand or left-hand? This tool is configured for right-hand cutting, suited to conventional rightward turning operations. What are the key dimensions to check before ordering? Important dimensions are the 32 mm shank diameter, 60 mm cutting height and 300 mm overall length; confirm these against the machine‑tool clearance and holder capacity. How does the 75° cutting angle affect machining? A 75° cutting angle helps to direct chips away from the cut and spreads cutting forces, improving chip control and stability on longer overhangs. Can this holder be used in standard DCKNR tool posts? Yes, the ISO S32T DCKNR designation matches standard DCKNR mounting conventions for compatibility with matching toolposts and clamping systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, long-reach solution that combines stable clamping and proven insert compatibility for reliable external turning cycles; the shank Ø 32 mm and 300 mm overall length deliver repeatable results in demanding set-ups — order directly via Metav Werkzeuge or consult our specialists for tailored advice. S32T DCLNL boring bar – DCLN for CN-- indexable inserts, 32 mm shank The S32T DCLNL boring bar is a left‑hand external turning bar designed to accept CN-- 1204 indexable inserts for precision turning and internal overhang applications. *Left-hand cutting for external turning operations *Shank Ø 32 mm for stable clamping *Overall length 300 mm for extended reach *Fits CN-- 1204 indexable inserts Built for rigidity and consistent results The long‑reach turning tool combines a 32 mm shank with a 300 mm overall length, offering a balance between accessibility and torsional stability. Where long overhangs are required, a thicker shank reduces vibration and run‑out; the design supports steady chip formation and improved surface finish when paired with suitable indexable inserts. The 95° cutting angle is optimised for external facing and fine turning, helping to maintain dimensional accuracy across batches. This configuration is especially effective in batch production and rework processes where repeatability is essential. Efficient left‑hand geometry for controlled cutting The DCLN style holder provides a deliberate left‑hand cutting orientation and is shaped to accept standard CN-- 1204 inserts, which simplifies tool inventory and changeover. The insert pocket and clamp arrangement enable reliable seating and repeatable positioning, which translates into shorter set‑up times and fewer adjustments at the machine. By using established insert geometries, the toolholder supports improved chip flow and thermal stability during medium‑to‑heavy material removal, contributing to higher throughput without sacrificing component quality. Integration advantages for workshop workflows As a modular external turning solution, this boring bar reduces tooling complexity: one holder accommodates widely available indexable inserts, lowering stocking requirements. The combination of stable clamping and standard insert sizes means predictable tool life and fewer unexpected stoppages. The tool’s mass and form factor — weighing approximately 1.867 kg — help dampen vibrations in many conventional lathe set‑ups, which in turn preserves insert edge life and reduces scrap rates. For production environments seeking steady cycle times, this approach supports process reliability and cost efficiency. Selection and practical use guidance The tool is compatible with insert size CN-- 1204 and is specified as S32T DCLNL in ISO designation; clamping interface references a holder width of 12 where applicable. The cutting height 60 mm should be accounted for when setting centre lines to ensure the insert nose is square to the workpiece. For best results with the turning bar, select inserts with suitable geometry and grade for the workpiece material and adhere to recommended feed and speed values from the insert manufacturer. Regular checks on seat condition and clamping torque will preserve repeatability and extend service intervals. Contact Metav Werkzeuge today to discuss the Teknik Cutting Tools S32T DCLNL boring bar and its suitability for specific turning tasks — Metav’s experts at info@metav-werkzeuge.com or +49 2822 7131930 provide supply and application advice from Emmerich. Technical data Article number: K482TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Overall length: 300 mm Diameter: 40 mm Cutting height: 60 mm Weight: 1.867 kg Special features For indexable inserts: CN-- 1204 ISO designation: S32T DCLNL Cutting direction: left Clamping holder size: 12 Cutting angle: 95° FAQ What insert type does this holder accept? The holder is designed for CN-- 1204 indexable inserts; the DCLN pocket secures the insert for reliable positioning in the S32T DCLNL boring bar (Teknik Cutting Tools, SKU K482TM). Is the cutting direction left or right? This turning tool has a left‑hand cutting orientation as specified, suitable for external left‑hand operations. What shank diameter is required for clamping? The shank diameter is 32 mm; secure clamping at that diameter ensures the rigidity expected from this style of boring bar. Can the bar reach deep bores or overhangs? With a 300 mm overall length, this long‑reach bar is intended for extended reaches where access is limited, while its thicker shank helps maintain stability. How does the 95° cutting angle affect machining? A 95° cutting angle delivers favourable cutting geometry for external facing and fine turning, promoting good surface finish and dimensional control when combined with the correct insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise ISO mounting, robust 32 mm shank stability and deep 300 mm reach for reliable metalworking operations; order the component directly via Metav Werkzeuge or consult the Metav team for application advice. Bohrstange K402TM – DCLN boring bar with S32T DCLNR shank, fits CN-- 1204 (Teknik Makina) The Bohrstange K402TM is a right-hand boring bar designed for stable metal cutting with CN-- 1204 indexable inserts, optimised for turning and internal machining tasks. ISO S32T DCLNR shank, 32 mm diameter Fits CN-- 1204 indexable inserts 300 mm overall length for deep reach Right-hand cutting, 95° cutting angle Precision and stability for consistent turning results The S32T DCLNR shank and solid construction provide a stable platform for repeatable machining, reducing vibration and improving surface finish. With a 32 mm shank and a measured mass of 1.867 kg, the toolholder maintains cutting geometry under load, which translates into fewer rejects and longer predictable tool life. The right-hand cutting orientation and a 95° cutting angle are chosen to balance cutting forces and chip flow for conventional lathe and CNC turning applications, enabling higher feed rates without sacrificing dimensional control. Seamless integration with common indexable inserts Engineered for compatibility, the holder accepts CN-- 1204 indexable inserts and follows the DCLN interface standard, simplifying tooling selection and reducing inventory complexity. The combination of a standard insert size and an ISO S32T clamping interface allows quick insert changes and predictable cutting behaviour. This ensures the toolholder can be introduced into existing setups with minimal adjustment, supporting faster changeovers and a more efficient production flow. Designed for deep access and secure clamping A 300 mm overall length and a body diameter of 40 mm provide the reach required for internal operations and recessed features while maintaining rigidity. The cutting height of 60 mm supports adequate insert engagement, and the specified clamping designation (12) secures the insert reliably under higher cutting loads. The resulting rigidity improves chip control and reduces the likelihood of chatter during deeper cuts, which benefits both batch production and one-off precision jobs. Suited to workshop and production environments Built for practical industrial use, the bar is appropriate for jobbing shops and production lines that demand robustness and predictable performance. The toolholder’s standard ISO mounting and common insert compatibility minimise stocking overhead and training requirements. For operations seeking dependable tooling sourced through a reliable partner, Metav combines broad product availability and sector expertise—backing components with application support and a comprehensive range of complementary tooling options. For tailored application advice or to secure the S32T DCLNR boring bar for your turning operations, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K402TM Manufacturer: Teknik Makina Description: Bohrstange / DCLN for CN-- Indexable Inserts ISO designation: S32T DCLNR Core technical data Shank diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Body diameter: 40 mm Weight: 1.867 kg Fits inserts: CN-- 1204 Cutting direction: right Cutting angle: 95° Clamping designation: 12 eClass: 21180806 Special features DCLN interface for CN-- inserts Right-hand boring bar for turning centres ISO S32T shank for standard toolholders Designed for internal and recessed machining FAQ What inserts are compatible with this boring bar? The bar is compatible with CN-- 1204 indexable inserts; the DCLN interface matches standard CN-- insert geometry for straightforward integration. Which shank size and ISO designation does the holder use? The holder uses an ISO S32T DCLNR shank with a 32 mm shank diameter suitable for standard tool posts and holders. Is this tool suitable for deep internal machining? Yes, the 300 mm overall length and 40 mm body diameter provide the reach and rigidity required for many internal machining tasks. What is the cutting orientation and angle of the tool? The tool is configured for right-hand cutting with a 95° cutting angle, optimised for conventional turning forces and chip evacuation. How is the insert secured and what clamping type is used? The holder employs a secure clamping arrangement (designation 12) compatible with the DCLN interface, ensuring stable insert retention under load. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Optimise internal turning processes with a rigid, left‑hand tool that combines reach and insert flexibility; the 32 mm shank and 300 mm overall length provide stability for deeper bores while compatibility with DN--1506 indexable inserts reduces setup time and tooling costs — order or enquire via Metav Werkzeuge for application support. Boring bar S32T DDQNL – DDQN for DN-- indexable inserts, left‑hand, 32 mm shank (Teknik Makina) The Boring bar S32T DDQNL is a left‑hand internal turning bar designed for machining operations that require extended reach and reliable insert clamping with DN--1506 indexable inserts. Left‑hand cutting direction 32 mm shank diameter for rigid clamping 60 mm cutting height for deeper machining Compatible with DN--1506 indexable inserts Increased rigidity for improved bore quality The combination of a 32 mm shank and a 300 mm overall length delivers a balance between reach and stiffness that reduces vibration during internal turning. Increased stiffness improves surface finish and tool life by limiting chatter; this is especially important when machining deeper bores where tool deflection can lead to oversize or poor roundness. The relatively substantial mass (approx. 1.805 kg) contributes to damping, so the bar maintains cutting stability under steady feeds and moderate depths of cut. Flexible insert system lowers tooling complexity Designed for use with DN--1506 indexable inserts, the bar uses a DDQN head geometry that makes insert changes straightforward and repeatable. Indexable inserts allow economical regeneration of cutting edges without replacing the whole tool, reducing inventory cost and downtime. For workshops unfamiliar with insert terminology: indexable inserts are small replaceable cutters that sit in a pocket and can be rotated or swapped when one edge is worn, delivering consistent cutting geometry with minimal setup. Left‑hand geometry for specialised setups The left‑hand cutting orientation makes the bar suitable for specific machine tool configurations and turning directions where conventional right‑hand tools are less effective. Left‑hand tools are commonly used for operations that require approach from the opposite direction or when clamping and workpiece rotation dictate an inverse cut direction. The bar’s 107.5° cutting angle is optimised to deliver effective chip formation and to control cutting forces in such orientations. Secure clamping and practical dimensions for workshop use The tool’s ISO designation (S32T DDQNL) and a clamp holder reference of 15 indicate compatibility with common toolholders and set‑ups in industrial turning shops. A 60 mm cutting height provides adequate support for the insert pocket and helps maintain alignment between insert and shank, which is vital for repeatable bore tolerances. In practice, these dimensions translate into straightforward mounting, consistent cutting geometry and predictable wear behaviour across batches. For procurement or technical advice on the Teknik Cutting Tools S32T DDQNL boring bar, contact Metav Werkzeuge in Emmerich for delivery and application recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K534TM Brand: Teknik Makina ISO designation: S32T DDQNL Facts Shank diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Diameter: 40 mm Weight: 1.805 kg Cutting angle: 107.5° Special features Left‑hand cutting direction Compatible with DN--1506 indexable inserts DDQN head geometry for secure clamping Clamp holder reference 15 FAQ What insert type does this boring bar accept? The bar is specified for DN--1506 indexable inserts and uses a DDQN pocket geometry to secure and position the insert reliably. Is the bar suitable for deep internal bores? With a 300 mm overall length and a 32 mm shank, the bar offers reach with improved rigidity for deeper bores compared with slimmer shanks. Which cutting direction is required for this tool? This tool is manufactured for left‑hand cutting; it is intended for machine setups and turning directions that demand a left‑hand tool orientation. What is the ISO designation and why does it matter? The ISO designation S32T DDQNL defines shank size and head geometry; it ensures compatibility with matching toolholders and clarifies the bar’s mechanical interface. Can this bar be used on standard lathes? Yes — the bar’s dimensions and ISO form are compatible with common lathe toolholders; however, the left‑hand cutting direction must match the chosen machining strategy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity and precise insert compatibility for consistent internal machining. With a 32 mm shank and 300 mm overall length, the tool delivers stable clamping and extended reach for deeper bores; order via Metav Werkzeuge or consult the technical team for application advice. S32T DDUNR boring bar — 32 mm shank, 300 mm overall length (Teknik Makina) The S32T DDUNR is a right-hand boring bar designed for internal turning operations with DN-- 1504 indexable inserts, suited to workshops and production environments requiring repeatable results 32 mm shank for secure clamping Compatible with DN-- 1504 inserts 300 mm overall length for deep bores Stable clamping for vibration-free machining A larger 32 mm shank provides increased rigidity at the toolholder interface, reducing chatter and vibration during internal cutting. The combination of a solid shank and the tool's mass helps maintain a consistent tool position, which translates into improved surface finish and repeatable bore diameters. For processes where dimensional stability is critical, the holder’s physical properties support tighter tolerances while lowering scrap rates and secondary operations. Optimised insert fit and efficient chip flow Designed specifically for DDUN style inserts and compatible with DN-- 1504 indexable plates, the toolhead geometry aligns insert seat and cutting edge to promote predictable chip formation. The 93° cutting angle and 55 mm cutting height assist in achieving stable engagement with the workpiece, particularly in internal bores where chip evacuation is limited. Using standardised inserts reduces downtime for tool changes and keeps inventory management straightforward for production planning. Practical setup and workshop integration With an overall length of 300 mm and a listed mass of 1.83 kg, the bar offers the reach required for deeper machining tasks while remaining manageable during fixturing and balancing. The designation for the clamping interface is listed as 15, enabling compatibility checks with existing tool posts and holders. The right-hand cutting orientation ensures correct cutting direction without modification to existing lathe settings, simplifying set-up and reducing trial cycles before production. Consistent supply and application support for production The holder is engineered for repeatable internal turning operations across a variety of steel and alloy components where indexable inserts are preferred for cost-effective edge replacement. Sourcing from an established distribution channel provides a practical advantage: Metav’s logistics and quality scrutiny in Emmerich function as a reliable supply filter for the European market, supporting continuity of production and predictable lead times. For tailored advice on fixture compatibility or to request detailed CAD and set-up guidance, contact Metav Werkzeuge — Metav’s specialists can confirm whether the S32T DDUNR boring bar matches the machining programme and holder configuration required in the workshop. Technical data Article number: K413TM Manufacturer: Teknik Makina ISO designation: S32T DDUNR Facts Shank diameter: 32 mm Overall length: 300 mm Diameter: 40 mm Cutting height: 55 mm Cutting angle: 93° Weight: 1.83 kg Special features Compatible inserts: DN-- 1504 Insert type: DDUN Cutting direction: right-handed Clamping holder designation: 15 FAQ What inserts does this boring bar accept? The boring bar accepts DN-- 1504 indexable inserts of the DDUN type; these inserts are the intended geometry for correct seating and chip control with the S32T DDUNR. Is the tool suitable for deep internal bores? Yes — the 300 mm overall length and 32 mm shank of the S32T DDUNR provide reach and rigidity appropriate for deeper internal machining tasks where indexable inserts are used. What is the shank size and why does it matter? Shank diameter is 32 mm; a larger shank increases rigidity, reducing vibration and improving dimensional repeatability during internal turning operations. Which cutting direction is intended for this holder? The design is for right-handed cutting, matching standard lathe feed directions and eliminating the need for reversal or special holder arrangements. How heavy is the tool and how does that affect set-up? The tool weighs 1.83 kg, offering a balance between reach and manageable handling during mounting; its mass contributes to stable cutting behaviour when properly clamped. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 32 mm shank for rigidity, compatibility with DN-- 1506 indexable inserts and a 300 mm overall length for stable deep boring — order directly via Metav Werkzeuge or consult our specialists for application advice. Bohrstange S32T DDUNR — Boring bar with 32 mm shank and 300 mm length by Teknik Makina The Bohrstange S32T DDUNR is a right-hand boring bar designed for internal turning operations using DN-- 1506 indexable inserts, offering a balanced geometry for reliable chip control and repeatable bore quality 32 mm shank for high rigidity Compatible with DN-- 1506 inserts 300 mm overall length for deep bores Right-hand cutting with 93° cutting angle Stable rigidity for tighter tolerances and longer runs The solid 32 mm shank and the 300 mm overall length are configured to provide a stable support during internal machining. This combination reduces deflection and vibration, which improves bore roundness and surface finish; the mass of 1.835 kg contributes to steadiness without compromising handling during setup. For workshops requiring consistent diameters over batch production, the increased stiffness translates into fewer rejects and reduced rework. Insert system and cutting geometry that deliver consistent chips Designed for indexable inserts DN-- 1506, the holder ensures quick insert changes and consistent seat positioning for repeatable results. The 55 mm cutting height secures correct insert engagement while the 93° cutting angle offers a near-neutral approach to the cut, balancing radial and axial forces for predictable chip flow. The assembly is specified for right-hand cutting direction, which is compatible with standard lathe orientations and programming practices in CNC environments. Practical mounting, identification and workshop use The tool is identified by the ISO-style designation S32T DDUNR, which eases matching with machine fixtures and tool lists. A clamp specification of 15 (clamp holder designation) is provided for correct seating in compatible tool posts or turret stations. With a nominal diameter of 40 mm, the bar covers common internal turning ranges; the design supports rapid replacement of indexable inserts and straightforward indexing procedures, keeping machine downtime to a minimum. For precise internal machining using Teknik Makina's S32T DDUNR, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: K412TM Manufacturer: Teknik Makina ISO designation: S32T DDUNR For indexable inserts: DN-- 1506 Shank diameter: 32 mm Overall length: 300 mm Diameter: 40 mm Cutting height: 55 mm Cutting direction: right Cutting angle: 93° Weight: 1.835 kg Clamp holder designation: 15 Facts Shank diameter: 32 mm Overall length: 300 mm Diameter: 40 mm Cutting height: 55 mm Cutting angle: 93° Weight: 1.835 kg Special features Right-hand cutting direction Compatible with DN-- 1506 indexable inserts ISO-style designation for simple identification Clamp holder: 15 Designed for internal turning applications FAQ What insert type fits this boring bar? The boring bar is compatible with DN-- 1506 indexable inserts; the seat and cutting height are prepared for secure mounting and correct chip control. Which cutting direction is specified? This tool is supplied for right-hand cutting, matching standard lathe orientations and typical CNC turret setups. What is the overall length and how deep can it reach? The bar has a 300 mm overall length, providing reach suitable for many internal boring tasks where extended access is required. How does the 93° cutting angle affect machining? A 93° cutting angle gives a near-neutral approach, balancing radial and axial loads to promote stable cutting and predictable chip flow during internal operations. Which ISO designation identifies this tool? The holder follows an ISO-style identification of S32T DDUNR, which simplifies tool management and ordering for workshop tooling lists. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a rigid 32 mm shank, compatibility with WN-- 0804 indexable inserts and a standard ISO designation that supports consistent turning performance; order the tool directly via Metav Werkzeuge or request technical consultation. S32T DWLNL boring bar — left‑hand DWLN for WN-- indexable inserts by Teknik Makina S32T DWLNL is a left‑hand boring bar designed for turning operations with WN-- 0804 indexable inserts, suitable for CNC lathe applications and workshop environments Left‑hand cutting direction 32 mm shank diameter Compatible with WN-- 0804 inserts 300 mm overall length Precision and stability for consistent turning results The S32T DWLNL is engineered to deliver steady, chatter‑reduced machining through a robust 32 mm shank and balanced mass. The combination of a substantial shank diameter and a 95° cutting angle improves clamping stability and helps to maintain concentricity during extended cuts. As a result, the tool produces repeatable diameters and better surface finishes when performing external turning or internal boring tasks. The measured 1.837 kg mass contributes inertia that dampens vibration without compromising responsiveness, which is particularly useful when working with longer overhangs or demanding materials. For workshops seeking predictable cycle times and reduced rework, this construction supports higher process reliability. Faster setup and proven insert compatibility Compatibility with WN-- 0804 indexable inserts and the DWLN geometry simplifies tooling selection and shortens setup time. The DWLN designation denotes a toolholder geometry that accepts standard WN-- inserts, enabling rapid insert changes and consistent seat location, which reduces downtime during production. The left‑hand cutting configuration is intended for specific turning directions on lathes and contributes to clearer planning of toolpaths in mixed‑operation cells. By using a standard insert size, spare‑part management is simplified and tool change intervals are minimised, yielding tangible productivity gains on batch and single‑piece flows alike. Easy integration into CNC workflows and dependable handling With a 300 mm overall length and the ISO designation S32T DWLNL, this boring bar fits established toolholder systems and can be integrated into existing setups with minimal adjustment. The 40 mm diameter where specified and a cutting height of 60 mm provide clear reference values for fixture and turret planning. The DWLN construction and standardised interface support straightforward tool data entry in CNC control systems and CAM libraries, reducing programming time. For operators less familiar with insert tooling, the geometry and accepted insert type are simple to interpret, enabling quicker training and consistent machine operation. For procurement and technical advice on the Teknik Makina S32T DWLNL boring bar, contact Metav Werkzeuge for ordering and detailed application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K502TM Manufacturer: Teknik Makina Designation: S32T DWLNL Facts Shank diameter: 32 mm Overall length: 300 mm Cutting height: 60 mm Weight: 1.837 kg Diameter: 40 mm Cutting angle: 95° Special features ISO designation S32T DWLNL For WN-- 0804 indexable inserts Left‑hand cutting direction DWLN geometry for WN-- indexable inserts FAQ Which insert type fits this boring bar? The boring bar is compatible with WN-- 0804 indexable inserts; the DWLN holder geometry secures the insert reliably for repeatable cutting. Is the bar suitable for left‑hand turning operations? Yes, the tool is specified for left‑hand cutting, making it appropriate where the machining strategy requires left‑hand orientation. What are the key mounting dimensions to consider? Reference the 32 mm shank diameter and 300 mm overall length when planning turret positions and overhang limits for stable operation. Can the S32T DWLNL be used with standard toolholders? The ISO designation S32T DWLNL indicates a standardised form factor intended for straightforward integration into compatible toolholder systems. How does the cutting angle affect performance? The 95° cutting angle provides a stable insert seat and helps to reduce vibration, improving surface finish and dimensional consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 32 mm shaft, 300 mm overall length and compatibility with WN-- 0804 indexable inserts, this tool offers stable internal turning with predictable chip flow and robust repeatability; order the item directly via Metav Werkzeuge or consult their technical advisors for specification support. Boring bar DWLN for WN-- indexable inserts — S32T DWLNR, 32 mm shaft, 300 mm length (Teknik Makina) A boring bar DWLN for WN-- indexable inserts designed for precision internal turning in production and repair environments, compatible with WN-- 0804 inserts and configured for right-hand cutting. S32T DWLNR ISO designation 32 mm shaft diameter for rigidity Compatible with WN-- 0804 inserts Right-hand cutting, 95° cutting angle Precision and stability for internal turning The toolholder delivers measurable rigidity thanks to its 32 mm shaft and balanced geometry. The ISO designation S32T DWLNR identifies a standardised clamping and seating form that reduces runout and vibration, resulting in improved roundness and surface finish when performing bores or internal profiling. By maintaining a rigid connection between spindle and insert seat, the tool reduces deflection under load, which increases first-pass yield and shortens rework times. Stability here directly improves machining tolerances and process reliability. Optimised chip control and shorter cycle times Configured for right-hand cutting and a 95° cutting angle, the bar is tuned to produce predictable chip flow with the WN-- insert geometry. The combination of geometry and a 60 mm cutting-edge height supports controlled chip breaking for many common steels and castings, reducing the risk of built-up edge and machine downtime. Quick insert seating and standardised indexable components mean insert changes are straightforward, supporting rapid tool replacement and lower per-part machining time. System compatibility that simplifies tooling decisions With an overall length of 300 mm and an outer diameter of 40 mm, the assembly fits common turret and boring-slide setups. The ISO-labelled design permits straightforward interchange with existing holders and mating clamping systems, so retrofitting into an established tool layout is simplified. The compatibility with WN-- 0804 indexable inserts avoids bespoke tooling orders and keeps stocking predictable, which benefits procurement and maintenance planning in small and larger workshops alike. Durable design for consistent production Weighing 1.837 kg and built to industrial tolerances, the component is dimensioned to withstand routine operational loads while maintaining cutting accuracy over time. The specified dimensions and standard interface reduce set-up variability and support repeatable offsets, which is critical for batch production and quality assurance. Selection through Metav’s quality filter assures that the product arrives ready for integration into demanding workflows and contributes to a dependable machining process. Contact Metav Werkzeuge GmbH in Emmerich for application advice or to place an order for this Teknik Makina DWLN boring bar — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: K422TM Brand: Teknik Makina Article: DWLN for WN-- indexable inserts ISO designation: S32T DWLNR Core technical data Shaft diameter: 32 mm Overall length: 300 mm Diameter: 40 mm Cutting-edge height: 60 mm Weight: 1.837 kg Cutting angle: 95° Special features For indexable inserts WN-- 0804 Right-hand cutting direction Compatible with DWLN for WN-- indexable inserts SKU K422TM FAQ Which inserts fit this tool? The DWLN boring bar is designed for WN-- 0804 indexable inserts; the seating and clamp geometry match that insert series for secure fixing and repeatable positioning. What is the shaft diameter and why does it matter? The shaft diameter is 32 mm; a larger shaft increases rigidity and reduces deflection, improving bore quality and tool life in cycle‑intensive operations. Is the tool suitable for left‑hand turning? This specification indicates a right‑hand cutting direction; for left‑hand operations, a corresponding left‑hand variant would be required. What overall length is supplied? The supplied overall length is 300 mm, providing reach for common internal turning tasks while maintaining stability. What is the ISO designation for the holder? The holder is designated S32T DWLNR, which clarifies the clamping interface and helps ensure compatibility with standard toolholders and turrets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid support, broad TNMG compatibility and extended reach to keep turning cycles consistent and tool changeovers rapid; choose the right holder for high-performance indexable turning and contact Metav Werkzeuge for technical advice or ordering. S32T MTUNL Boring Bar – MTUN for TNMG Indexable Inserts, 300 mm (Teknik Makina) A S32T MTUNL boring bar engineered for left‑hand external turning with TNMG 2204 indexable inserts, offering a balance of rigidity and reach for medium‑duty lathe work Left-hand cutting orientation Holds TNMG 2204 indexable inserts 32 mm shank diameter for stability 300 mm overall length for extended reach Improved stability and repeatable turning results The design centres on a 32 mm shank and a solid mass (weight: 1.836 kg) to reduce vibration during cut entry and maintain concentricity over longer passes. A consistent toolholder geometry ensures that radial forces are managed, which reduces the likelihood of chatter and supports tighter tolerances. For production environments where repeatability matters, the reduced deflection translates directly into fewer rejected parts and less rework. Broad insert compatibility for process flexibility Compatibility with TNMG 2204 indexable inserts means the holder accepts a widely available insert grade and format, simplifying inventory and enabling quick insert swaps between roughing and finishing operations. The MTUN designation indicates the insert clamping and seating geometry tailored to triangular TNMG plates; this allows stable cutting edge support and straightforward orientation. The resulting setup time is minimised, improving overall machine utilisation. Designed for practical machining tasks and clearance The tool features a 60 mm cutting height and a 93° cutting angle, which together provide practical clearance and effective chip flow for external turning applications. The left‑hand (L) orientation is suited to operations where tool approach and feed direction demand left‑hand geometry. The 300 mm overall length delivers reach for off‑centre work or components with deeper shoulders, while the specified diameters (shank 32 mm, body 40 mm) assist with secure clamping in standard toolposts or holders. Efficient operation and serviceability on the shop floor Attention to clamping interface and standard insert type reduces downtime during tool changes and maintenance. The holder is compatible with standard TNMG inserts, so replacement parts and grades are readily available across suppliers. When set up correctly, the combination of rigid shank and established insert format supports higher cutting parameters and predictable tool life, which helps to lower cost per part in series production. For detailed application advice on the S32T MTUNL or to discuss an order and compatibility with specific lathe models, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to receive tailored guidance and next‑day dispatch options Technical data Article number: K528TM Manufacturer: Teknik Makina ISO designation: S32T MTUNL Designation (EN): MTUN for TNMG Indexable Inserts Core dimensions Shank diameter: 32 mm Overall length: 300 mm Body diameter: 40 mm Cutting height: 60 mm Weight: 1.836 kg Cutting angle: 93° Features / Applications Left-hand cutting direction For TNMG 2204 indexable inserts Suited to external turning and medium‑reach applications Stable clamping interface for reduced vibration FAQ What insert type fits this holder? The holder accepts TNMG 2204 indexable inserts; the MTUN geometry is configured for stable seating of TNMG triangular plates in the S32T MTUNL boring bar. Is the tool suitable for deep‑shoulder turning? Yes. With a 300 mm overall length and a 60 mm cutting height, the holder provides extended reach for components with deeper shoulders while maintaining stability. Which cutting direction does the holder support? This tool is manufactured for left‑hand cutting direction to match lathe setups requiring left‑hand approach and feed. How does the shank diameter affect performance? A 32 mm shank increases bending stiffness compared with smaller shanks, reducing deflection and improving surface finish and repeatability during turning. Who manufactures this tool and what is the SKU? The tool is produced by Teknik Makina and listed under SKU K528TM; the ISO designation is S32T MTUNL. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the left-hand cutting geometry, compatibility with TNMG 1604 indexable inserts and a robust 32 mm shank for stable, repeatable external turning; these features combine to deliver reliable chip control and machining accuracy. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. S32T MTUNL Boring Bar — MTUN for TNMG Indexable Inserts, left-hand, Ø40 mm (Teknik Makina) A S32T MTUNL boring bar designed for left-hand external turning with TNMG 1604 indexable inserts, suited to stable medium-duty applications where repeatable seating and chip evacuation matter Compatible with TNMG 1604 indexable inserts Left-hand cutting for specialised turning tasks Shank diameter 32 mm for secure clamping Overall length 300 mm for extended reach Precision where it matters: stable support for indexable inserts The S32T MTUNL is engineered to provide consistent insert seating and predictable cutting behaviour when paired with TNMG 1604 indexable inserts. The combination of a 32 mm shank diameter and a body diameter of Ø40 mm reduces deflection under radial loads, which improves dimensional stability on external bores and shoulders. Translating insert geometry into reliable part tolerances is simplified by the tool's geometry, so cycle times can be maintained without compromising finish quality. Designed for controlled chip flow and effective cutting With a specified cutting angle of 93° and left-hand cutting orientation, the bar assists in directing chips away from the cutting zone, reducing recutting and potential surface damage. The cutting edge height of 60 mm aligns the insert correctly for secure clamping and dependable performance; this is particularly useful when swapping inserts during shift changes or in mixed-production environments where quick turnover is required. The tool's mass and balance also help to dampen vibration, supporting a better surface finish. Practical installation and compatibility with clamping systems The bar is supplied in an ISO designation of S32T MTUNL, making it straightforward to identify in tool libraries and draw lists. A shank diameter of 32 mm matches common toolholders, while the specified clamping-holder dimension "16" indicates the intended clamping interface for many standard holders. The mechanical setup is therefore uncomplicated, enabling rapid tool changeovers and minimising machine downtime when the insert index is required. Built for workshop reliability and everyday use Weighing 1.835 kg and measuring 300 mm overall, the component balances reach and rigidity for a wide range of external turning tasks. The construction supports repeated insert changes and routine handling without excessive wear, helping to preserve toolholder precision over time. For workshops seeking dependable tooling that integrates seamlessly into existing turning cells, this solution provides a robust, no-nonsense option that prioritises operational continuity and measurable results. Contact Metav Werkzeuge for tailored advice on integrating the S32T MTUNL boring bar into existing setups and to secure reliable supply from Emmerich. Technical data SKU: K522TM Manufacturer: Teknik Makina ISO designation: S32T MTUNL Article name (EN): MTUN for TNMG Indexable Inserts Core dimensions Shank diameter: 32 mm Overall length: 300 mm Diameter: 40 mm Cutting angle: 93° Cutting edge height: 60 mm Weight: 1.835 kg Clamping-holder designation: 16 Cutting direction: left Suitable for inserts: TNMG 1604 eClass: 21180806 Special features Left-hand cutting geometry Compatibility with TNMG 1604 indexable inserts Files available: 62de7ed30aced56449540ec4, 62de7e330f56dbb4de4dbef6 FAQ Which inserts are compatible with this boring bar? The boring bar is specified for TNMG 1604 indexable inserts and performs as intended when those insert dimensions and seat geometry are used. Is the cutting direction left or right-handed? This model is designed for left-hand cutting; the designation S32T MTUNL indicates the left-hand orientation. What are the key dimensions to check for toolholder compatibility? Check the shank diameter 32 mm, body Ø40 mm and the clamping-holder designation "16" to ensure the holder provides the correct clamping and clearance. What is the ISO designation and SKU for ordering? ISO designation S32T MTUNL; SKU K522TM for ordering and inventory systems. How long and heavy is the tool for handling and storage planning? Overall length is 300 mm and the weight is 1.835 kg, useful values when planning tool storage and handling logistics. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid clamping interface with a 32 mm shank and compatibility with TNMG 2204 indexable inserts for consistent chip control and reduced tool change downtime; secure the tool through Metav Werkzeuge or consult our advisors for application-specific guidance. K450TM S32T MTUNR Boring Bar — MTUN for TNMG indexable inserts, 32 mm shank, right-hand The K450TM S32T MTUNR is a right-hand external boring bar designed for turning applications using TNMG 2204 indexable inserts, offering extended reach and stable support for medium-duty machining 32 mm shank for stable clamping Compatibility with TNMG 2204 inserts Right-hand cutting with 93° approach 300 mm overall length for extended reach Maximise cycle reliability with rigid support and proven insert compatibility The combination of a 32 mm shank and a supportive cutting geometry ensures consistent clamping and reduced vibration during external turning. Designed for TNMG indexable inserts, the tool supports reliable chip formation and predictable tool life; the 93° approach angle helps maintain favourable cutting forces and surface finish. These engineering choices translate into fewer interruptions on the shop floor and a measurable improvement in process stability for batch production. Reach confined bores and external profiles with controlled balance With a 300 mm overall length and a nominal diameter of 40 mm, the boring bar provides extended reach while retaining a practical balance for set-up and handling. The 60 mm cutting height stabilises the insert pocket, and the unit weight of 1.836 kg gives a tangible feel in the holder that aids repeatable mounting. For fixtures where access is limited, the extended length and robust shank reduce the need for multiple tool changes, helping workpieces to be completed faster with fewer set-up iterations. Clear identification and traceable quality for process assurance The tool carries the ISO-style designation S32T MTUNR and is listed under SKU K450TM, enabling straightforward procurement and inventory control. Compatibility with TNMG 2204 inserts simplifies tooling logistics by using an established insert family. Supplied by Teknik Cutting Tools and distributed via Metav Werkzeuge’s European quality filter, the component fits into a traceable, professional toolroom supply chain that supports continuous production and dependable reordering. Discuss the application with Metav Werkzeuge in Emmerich to confirm suitability of the Teknik Cutting Tools K450TM and secure the optimal configuration for the workshop; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K450TM Manufacturer: Teknik Makina Product name: Bohrstange Additional designation: MTUN for TNMG Indexable Inserts ISO designation: S32T MTUNR Facts Shank diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Diameter: 40 mm Weight: 1.836 kg Approach angle: 93° Special features For TNMG 2204 indexable inserts Right-hand cutting SKU: K450TM Clamp holder size: 22 FAQ Which inserts fit this boring bar? The boring bar is designed specifically for TNMG 2204 indexable inserts; the MTUN pocket accepts standard TNMG geometry for predictable seating and chip flow. Is the tool suitable for right-hand turning only? Yes, the construction and cutting direction are specified for right-hand external turning operations as delivered. What shank diameter is required for the holder? The tool features a 32 mm shank, which requires a matching holder or collet system sized for 32 mm shanks. How does the 93° approach angle affect cutting? The 93° approach angle reduces axial cutting forces and supports stable engagement, improving surface finish and extending insert life under recommended conditions. How is the product identified for reordering? Reorder using SKU K450TM or the ISO-style code S32T MTUNR to ensure the correct boring bar configuration is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of compatibility and stability: the bar’s 32 mm shank and 300 mm overall length ensure secure clamping and extended reach while the tool accepts WN-- 0804 indexable inserts for fast insert changes; order directly via Metav Werkzeuge or consult their specialists for application support. Boring bar S32T MWLNL – MWLN for WN-- indexable inserts, left-hand cut Boring bar S32T MWLNL for turning applications, configured for MWLN-style holders and designed to accept WN-- 0804 indexable inserts for reliable internal and external machining 32 mm shank for enhanced stability 300 mm overall length for deep reach For WN-- 0804 indexable inserts Left-hand cutting with 95° approach angle Stable clamping and secure insert compatibility for reliable machining The S32T MWLNL designation signals an industry-standard boring solution with a focus on repeatability. Featuring compatibility with WN-- 0804 indexable inserts, the tool enables rapid insert replacement and consistent geometry at the cutting edge, which reduces setup time and scrap rates. The 95° cutting angle improves clearance in confined bores and stabilises chip formation; explained simply, the angle helps guide chips away from the contact zone, lowering rework and tool wear. This makes the system suitable for production-focused turning where predictable cycle times are required. Shop-floor performance: rigidity, reach and left-hand operation A 32 mm shank and a 300 mm overall length balance reach with stiffness: the larger shank diameter reduces deflection during plunge and lateral cuts, while the nominal 40 mm diameter and 60 mm cutting height provide a secure seat for the insert and holder assembly. The tool’s left-hand cutting configuration means the insert removes material in counter-clockwise rotation relative to the bar, a necessary detail for certain lathe setups and part clamping arrangements. At approximately 1.833 kg, the bar is straightforward to handle during tool changes yet substantial enough to damp vibration for steady surface finish and bore accuracy. Integration, maintenance and application guidance for production use Designed as a modular element for MWLN-style holders (holder code 08), this boring bar integrates easily into standard tool turrets and quick-change systems. Indexable inserts deliver the economic advantage of replacing only the cutting edge rather than the whole tool, lowering long-term tooling costs and simplifying inventory. Basic maintenance is limited to ensuring clean clamping faces and correct torque on clamp screws; consistent seating of the insert is essential for achieving the stated repeatability. For CNC turning centres handling medium-duty internal and external operations, this configuration offers a pragmatic balance of reach, rigidity and serviceability. Discuss technical suitability and integration with Metav Werkzeuge—contact the team at info@metav-werkzeuge.com or call +49 2822 7131930 to request application advice or a tailored recommendation for Teknik Cutting Tools S32T MWLNL boring bars (SKU K512TM) Technical Data Article number: K512TM Manufacturer: Teknik Makina ISO designation: S32T MWLNL Facts Shank diameter: 32 mm Overall length: 300 mm Diameter: 40 mm Cutting height: 60 mm Weight: 1.833 kg Cutting direction: left Cutting angle: 95° Special features For indexable inserts: WN-- 0804 Compatible holder size: 08 Type: MWLN for WN-- indexable inserts FAQ Which indexable inserts fit this boring bar? The bar is specified for WN-- 0804 indexable inserts; these are the intended insert size for reliable seating and correct cutting geometry on the S32T MWLNL bar (SKU K512TM). Is the cutting direction left-hand or right-hand? This tool is configured for left-hand cutting, which should be selected when the machining centre and part clamping require counter-clockwise material removal relative to the bar. What are the key dimensions for clamping and reach? Key dimensions include a 32 mm shank, 300 mm overall length and 40 mm diameter, providing a combination of reach and rigidity for internal and external turning tasks. Can the bar be used on standard MWLN holders? Yes, the S32T MWLNL bar is intended for MWLN-style holders and the compatible holder size is listed as 08, facilitating integration into common quick-change systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of rigid clamping and insert compatibility for consistent internal turning results; the design offers a reliable 32 mm shank and a 40 mm body for stable performance in bore-making operations. Order directly via Metav Werkzeuge or consult Metav’s specialists for technical clarification and application advice. S32T MWLNR boring bar — MWLN for WN-- indexable inserts, 32 mm shank (Teknik Makina) A compact S32T MWLNR boring bar engineered for precision internal turning with WN-- 0804 indexable inserts in right-hand cutting applications. 32 mm shank for secure clamping 40 mm body for deep bore capacity Compatible with WN-- 0804 inserts Right-hand cutting, 95° cutting angle Stable clamping for repeatable accuracy The toolholder’s 32 mm shank and robust geometry minimise vibration and enable repeatable accuracy across serial production. A stable clamping interface reduces runout and extends insert life, which translates into fewer tool changes and more productive spindle time. For shops transitioning from single-part setups to batch production, the improved stability delivers measurable process reliability without complex machine adaptations. Optimised geometry for indexable insert performance Designed for the MWLN system and compatible with WN-- 0804 inserts, the bar’s 95° cutting angle and right-hand cutting orientation provide controlled chip flow and predictable cutting forces. The 60 mm cutting height secures insert seating and supports consistent contact geometry during interrupted cuts. Explaining briefly: indexable inserts allow quick edge replacement without regrinding, so component tolerances are maintained while downtime for tool service is minimised. Built for accessible machining and integration With a 300 mm overall length and 40 mm diameter, the component offers depth reach for internal turning while remaining manageable on common CNC lathes. The ISO designation S32T MWLNR indicates the shank and holder family for straightforward toolholder selection and machine planning. The unit’s weight of 1.833 kg contributes to perceived robustness without adding unnecessary load to the turret, simplifying balancing and setup procedures in mixed-production environments. For tailored application support and delivery options, contact Metav Werkzeuge—technical consultants are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss how this Teknik Makina boring bar suits specific machining tasks. Technical data Article number: K430TM Manufacturer: Teknik Makina ISO designation: S32T MWLNR Type designation: MWLN for WN-- Indexable Inserts Compatible inserts: WN-- 0804 Facts Shank diameter: 32 mm Body diameter: 40 mm Cutting height: 60 mm Overall length: 300 mm Weight: 1.833 kg Cutting angle: 95° Cutting direction: Right Special features MWLN system compatibility ISO S32T MWLNR family Suitable for internal turning / boring Designed for indexable inserts FAQ Which insert size fits this toolholder? The boring bar is specified for WN-- 0804 indexable inserts; this insert type ensures correct seat clearance and cutting geometry for the MWLN holder family. Is the bar suitable for right-hand cutting only? Yes — the tool is configured for right-hand cutting with a 95° cutting angle, matching standard right-hand internal turning operations. What is the declared ISO designation and why is it relevant? The S32T MWLNR ISO designation identifies the shank diameter and holder family, aiding selection of matching toolposts and ensuring consistent clamping across setups. Can this boring bar reach deep bores on standard CNC lathes? With a 300 mm overall length and a 40 mm body, the bar offers practical reach for many internal turning tasks while maintaining stiffness suitable for moderate-depth bores. Does the product include inserts? This entry describes the Teknik Makina S32T MWLNR boring bar; inserts such as WN-- 0804 are listed for compatibility but are not necessarily included with the holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity, a 32 mm shank and a 300 mm reach for reliable left-hand turning operations; order directly via Metav Werkzeuge or contact our advisors for application-specific guidance. S32T PCLNL Boring Bar – PCLN for CNMG indexable inserts, left-hand, no internal coolant (Teknik Makina) The S32T PCLNL is a left-hand boring bar engineered for PCLN holders and CNMG 1204 indexable inserts, delivering increased stiffness and reach for medium-duty turning and boring tasks in workshop and production environments S32T PCLNL ISO shank, 32 mm shaft For CNMG 1204 indexable inserts Left-hand cutting direction, 95° cutting angle No internal coolant; 300 mm overall length Increased precision and rigidity for stable turning results The combination of a 32 mm shank and a substantial nominal diameter of 40 mm provides enhanced rigidity under load, reducing deflection during interrupted cuts and off-centre machining. This improved stiffness translates into more consistent surface finish and tighter dimensional control when using indexable tooling. Machinists benefit from a robust toolholder that maintains the set geometry over longer tool overhangs, so repeatable turning performance becomes easier to achieve on small-batch jobs and serial production alike. The construction supports a cutting height of 50 mm, which ensures correct insert seating and consistent chip formation. Practical coolant strategy and chip control for reliable processes Designed without internal coolant, this version suits applications where external coolant or dry machining is preferred. The absence of internal channels simplifies maintenance and eliminates clogging risks in chip-heavy operations while still allowing efficient external fluid delivery or air blow-off. The left-hand cutting orientation combined with a 95° cutting angle offers predictable cutting forces for left-handed toolpaths and helps to direct chips away from the workpiece. For workshops adapting to varied coolant arrangements, this toolholder provides a straightforward, low-maintenance option that integrates with existing chip evacuation practices. Compatibility, handling and workshop integration Compatibility with CNMG 1204 indexable inserts makes the toolholder versatile for a broad range of turning applications, from semi-finishing to profile turning, using widely available carbide grades. The ISO designation S32T PCLNL indicates the shank form and holder geometry expected by standard PCLN systems, simplifying procurement and tooling inventory. With a total length of 300 mm and a mass of approximately 1.815 kg, the tool balances reach and handling—suitable for manual setup or CNC turret use. The clamping designation "12" defines the clamping interface and aids selection of matching clamping equipment or adapters to ensure secure fixation during high-feed operations. Discuss application requirements with Metav Werkzeuge to confirm that the S32T PCLNL boring bar suits the intended left-hand turning tasks; Metav Werkzeuge can advise on insert grades, clamping and coolant strategy—contact via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P352TM Manufacturer: Teknik Makina Designation: PCLN for CNMG indexable inserts ISO designation: S32T PCLNL Numbers / Core technical data Shaft diameter: 32 mm Cutting height: 50 mm Overall length: 300 mm Diameter (nominal): 40 mm Weight: 1.815 kg Cutting angle: 95° Clamping designation: 12 Design / Special features Left-hand cutting direction Without internal coolant For CNMG 1204 indexable inserts PCLN holder geometry FAQ Which inserts fit this toolholder? The toolholder accepts CNMG 1204 indexable inserts; the PCLN seat geometry is matched to standard CNMG sizes for straightforward use. Can the boring bar be used with internal coolant systems? This variant is specified without internal coolant; internal delivery is not available, so external coolant or dry machining is recommended for this bar. Is the S32T PCLNL suitable for CNC turret use? Yes, the ISO shank form and 32 mm shaft make the S32T PCLNL appropriate for turret-mounted turning centres and stable manual setups alike. What does the left-hand designation mean for setup? Left-hand cutting direction indicates the bar is intended for left-hand toolpaths; the 95° cutting angle and orientation should be matched to the machine's tool numbering and programme direction. How does the 300 mm overall length affect performance? A 300 mm reach offers extended access to bore or turn deeper features while the 32 mm shank and mass of 1.815 kg help maintain stability; however, overhang should always be minimised to reduce deflection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust S32T PCLNR design, stable 32 mm shank and compatibility with CNMG 1204 inserts for consistent turning performance; order the tool via Metav Werkzeuge or request technical advice from our consultants. P342TM – Boring bar (PCLN for CNMG indexable inserts) by Teknik Makina, S32T PCLNR, 32 mm shank A robust right‑hand boring bar designed for secure clamping of CNMG 1204 indexable inserts, optimised for conventional turning tasks without internal coolant. S32T PCLNR holder for CNMG inserts 32 mm shank for stable clamping Compatible with CNMG 1204 indexable inserts Right-hand cutting, without internal coolant Precise stability for repeatable boring results The holder’s 32 mm shank and solid construction provide enhanced rigidity during turning, which reduces vibration and supports dimensional accuracy. The S32T PCLNR designation denotes a standardised shank and head geometry, enabling predictable behaviour in lathes and turret systems. This stability is particularly relevant when machining medium‑diameter bores and when repeatability across multiple workpieces is required, leading to fewer reworks and improved process reliability. Efficient setup and insert interchangeability Compatibility with CNMG 1204 indexable inserts simplifies tooling logistics and minimises downtime: standard insert sizes allow rapid insert changes and straightforward inventory management. The right‑hand cutting orientation and the specified cutting height 50 mm ensure correct seat alignment for common turning operations. For workshops aiming to streamline set‑up times, this holder supports quick, reproducible clamping of the cutting edge, reducing preparation time between jobs. Design decisions that suit dry machining Specified without internal coolant, the bar is intended for applications where external cooling is preferred or where coolant is omitted for process reasons. The 95° cutting angle and the holder geometry are matched to conventional CNMG insert geometries, optimising chip flow and contact conditions at the tool tip. Where dry turning is chosen for part quality or downstream processing, the construction of this tool contributes to stable thermal behaviour and consistent surface finish. Practical dimensions and handling on the shop floor With a 300 mm overall length and an effective diameter related to a 40 mm body, the boring bar offers sufficient reach for many internal turning tasks while keeping overhang manageable. The unit weight of 1.815 kg gives a tangible sense of robustness without excessive mass that could complicate handling during tool changes. The combination of measured dimensions and a standardised holder interface supports predictable machine behaviour and easier tool inventory planning. For solid performance in turning operations, contact Metav Werkzeuge to discuss the Teknik Makina P342TM boring bar — technical advice and order handling are available from our Emmerich distribution centre at info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Technical data Article number: P342TM Manufacturer: Teknik Makina Shank diameter: 32 mm Overall length: 300 mm Weight: 1.815 kg Cutting height: 50 mm Body diameter: 40 mm Cutting angle: 95° Cutting direction: right ISO designation: S32T PCLNR For indexable inserts: CNMG 1204 Holder type: PCLN for CNMG indexable inserts Special feature: without internal coolant FAQ What insert type fits this holder? The holder is compatible with CNMG 1204 indexable inserts; the PCLN seating ensures correct positioning for CNMG geometry. Is this tool suitable for internal coolant systems? The P342TM is specified without internal coolant; it is intended for dry machining or external coolant arrangements. What is the shank size and overall reach? The boring bar has a 32 mm shank diameter and a 300 mm overall length, offering a balanced reach for many internal turning tasks. Which cutting direction is supported? This tool is configured for right‑hand cutting, matching common lathe setups for conventional turning. How does the S32T PCLNR designation affect compatibility? The S32T PCLNR ISO designation describes the shank and head form, aiding compatibility with tool holders and ensuring standardised mounting and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com