Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a rigid shank and insert compatibility that combine to deliver stable, repeatable external turning; the robust design reduces vibration and supports consistent surface finish. Order directly via Metav Werkzeuge or consult our technical advisers for machining set-up and delivery. S32T PDUNL Boring bar — PDUN for DNMG 1506, left-hand, Ø40 × 300 mm (Teknik Makina) S32T PDUNL is a left-hand boring bar designed for external turning with DNMG indexable inserts, suitable for applications requiring stable clamping and precise chip control Left-hand cutting direction for secure chip flow Compatible with DNMG 1506 indexable inserts Ø40 mm body, 300 mm overall length 32 mm shank diameter for stable clamping Stability and productivity for turning operations The bar is engineered to maximise machining stability: a 32 mm shank and a Ø40 mm body reduce deflection under load, which leads to improved dimensional accuracy and longer insert life. The cutting height 55 mm and a cutting angle of 93° are selected to match DNMG geometry, enabling reliable chip formation and consistent surface quality. By lowering vibration and ensuring a firm toolholder connection, cycle times can be more predictable and scrap rates reduced. For workshops transitioning from less rigid tooling, the increased stiffness translates directly into measurable productivity gains and fewer rework cycles. Designed for DNMG insert systems and simple set-up Compatibility with DNMG 1506 indexable inserts allows straightforward integration into existing turning processes and tooling inventories. The ISO designation S32T PDUNL signals a standardised interface for clamping systems and makes replacement straightforward. A clamping-holder reference value of 15 supports common holders in lathe tool posts, simplifying mechanical set-up. The left-hand geometry is optimised for applications where feed and spindle directions require a left-hand approach; this orientation enhances chip evacuation on specific turning operations and contributes to safer, more efficient machining sequences. Practical benefits at the machine and on the shop floor With an overall length of 300 mm and a nominal weight of 1.805 kg, the bar balances reach and rigidity for medium-reach external turning tasks. The combination of dimensions supports turning operations where a longer overhang is necessary without sacrificing stability. Using indexable inserts reduces downtime for regrinds and tool changes, while the standardised insert pocket offers repeatable positioning for serial production. The robust construction also aids in predictable tool wear patterns, which assists in maintenance planning and reduces unexpected stoppages. Contact Metav Werkzeuge to discuss suitability for specific materials, clamping options and to reserve the S32T PDUNL boring bar for prompt dispatch from Emmerich Technical data Article number: P312TM Manufacturer: Teknik Makina SKU: P312TM Designation: PDUN for DNMG Indexable Inserts ISO designation: S32T PDUNL ECLASS: 21180806 Facts Shank diameter: 32 mm Body diameter: 40 mm Overall length: 300 mm Cutting height: 55 mm Cutting angle: 93° Weight: 1.805 kg Cutting direction: left Special features For DNMG 1506 indexable inserts Compatible with standard clamping-holder size 15 Left-hand cutting geometry Suitable for external turning and boring applications Standardised ISO toolholder interface FAQ Which inserts fit this boring bar? The S32T PDUNL boring bar is designed for use with DNMG 1506 indexable inserts; Teknik Makina specifies the DNMG form for correct seating and chip flow. Is the tool suitable for right-hand lathes? The bar has a left-hand cutting direction; it is intended for setups where left-hand tooling matches the spindle and feed arrangement. What is the shank size required in the toolpost? A 32 mm shank diameter requires a corresponding clamping capacity; P312TM is compatible with standard holders that accept a 32 mm shank and a clamping-holder reference of 15. Can this bar be used for heavy roughing cuts? The robust Ø40 mm body and 32 mm shank provide increased rigidity for heavier cuts compared with smaller-diameter bars, but final suitability depends on machining parameters and workpiece material. What is the ISO designation and why does it matter? The ISO designation S32T PDUNL defines the tool geometry and mounting standard; using the specified designation ensures compatibility with matching holders and predictable insert positioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust tool designed for stable turning and reliable chip control: the combination of a 32 mm shank, compatibility with DNMG 1506 inserts and a 300 mm overall length delivers extended reach and consistent cutting performance. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar PDUN for DNMG Indexable Inserts — S32T PDUNR, 32 mm shank, 300 mm overall length (Teknik Makina) The Boring Bar PDUN for DNMG Indexable Inserts is a right-hand turning tool engineered for secure insert clamping and medium-duty external or internal turning where DNMG 1506 inserts are preferred S32T PDUNR ISO designation 32 mm shank diameter Compatible with DNMG 1506 inserts 300 mm overall length Right-hand cutting direction Stable support for accurate turning and tool life The bar’s 32 mm shank and substantial cutting height of 55 mm provide a rigid connection to the toolholder, reducing vibration and improving surface finish in interrupted and continuous cuts. The ISO designation S32T PDUNR denotes the standardised shank form and insert orientation, which simplifies machine set-up and interchangeability. Because the tool accepts DNMG 1506 indexable inserts, commonly stocked carbide grades and chipbreakers can be used to tune cutting conditions for different steels and cast irons, balancing tool life and productivity. The emphasis here is on repeatable accuracy and lower secondary finishing time through stable machining. Extended reach and practical adaptability for workshop needs With an overall length of 300 mm and a nominal diameter of 40 mm, the tool offers extra reach without excessive deflection when compared with shorter bars, making it suitable for deeper turning operations and facing tasks where accessibility matters. The right-hand cutting geometry is optimised for conventional lathe orientations; paired with the correct holder it delivers consistent chip flow and predictable cutting forces. The combination of length and standard insert compatibility supports fast reconditioning of the cutting edge during production, which helps to reduce downtime and maintain cycle-time targets. Predictable handling, clear specifications and straightforward integration Weighing 1.805 kg, the assembly feels balanced for manual handling and secure mounting, while the specified cutting angle of 93° helps position the insert for robust cutting engagement. The tool’s designation and measured parameters make it straightforward to select a matching clamping system — the entry "15" refers to the compatible clamping holder size used with this bar — and to confirm fitment in existing toolposts. As a product from Teknik Makina (SKU P302TM), performance expectations are supported by clear dimensional data, allowing purchasing and production planners to make evidence-based decisions that favour uptime and consistency. Contact Metav Werkzeuge for tailored application advice, insertion recommendations and to request the P302TM technical datasheet — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: P302TM Brand: Teknik Makina ISO designation: S32T PDUNR Type designation: PDUN for DNMG Indexable Inserts Facts Shank diameter: 32 mm Overall length: 300 mm Diameter: 40 mm Cutting height: 55 mm Weight: 1.805 kg Cutting angle: 93° Cutting direction: Right Special features Compatible inserts: DNMG 1506 Clamping holder size: 15 Indexable insert system Right-hand turning geometry Designed for medium-duty external/internal turning FAQ Which inserts fit this boring bar? The boring bar accepts DNMG 1506 indexable inserts; matching grades and chipbreakers can be selected to suit the workpiece material and cutting conditions. Is the bar suitable for deep turning applications? Yes — the 300 mm overall length and 40 mm diameter provide extended reach for deeper turning while maintaining improved rigidity compared with longer, slimmer alternatives. What is the shank size for mounting in toolholders? The shank diameter is 32 mm, compatible with holders specified for that shank size; the technical designation S32T PDUNR clarifies the shank form for correct holder selection. Does the tool require a specific clamping holder? The bar is intended for use with a clamping holder of size 15, enabling secure fixation of the insert and consistent cutting height of 55 mm. Who manufactures this boring bar and what is the SKU? This tool is supplied by Teknik Makina, sold under SKU P302TM, and is designated PDUN for DNMG Indexable Inserts (S32T PDUNR). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust build, precise compatibility with WNMG 0804 inserts and an optimised 95° cutting angle for consistent chip control; order directly via Metav Werkzeuge or consult the team for application-specific advice. Boring bar PWLN for WNMG indexable inserts (S32T PWLNL) by Teknik Makina — 32 mm shank, left‑hand The PWLN boring bar for WNMG indexable inserts delivers a left‑hand turning solution for internal and external machining where stable clamping and predictable chip flow matter most 32 mm shank diameter Compatible with WNMG 0804 inserts Left‑hand design for internal turning 95° cutting angle for reliable chip control Precision that raises throughput and reduces rework The bar is engineered to provide repeatable results under industrial conditions. Its 32 mm shank and ISO designation S32T PWLNL ensure stable mounting in standard tool holders, reducing vibration and the risk of tool chatter. The geometry, matched to WNMG 0804 indexable inserts, translates into consistent cutting engagement and predictable tool life; fewer interruptions for tool changes mean higher effective machine uptime and improved process economy. Easy integration and mechanical reliability on the lathe With a 300 mm overall length, 40 mm diameter and a cutting height of 60 mm, the bar fits typical turret and tool‑post set‑ups while keeping the centre‑of‑mass close to the holder. The left‑hand configuration and a 95° cutting angle support controlled chip evacuation and stable side cutting forces, which simplifies set‑up and reduces the need for frequent readjustment. The component’s mass (approx. 1.764 kg) contributes to damping without excessive inertia, helping to maintain surface finish and dimensional accuracy during extended cuts. Practical application advantages for workshop and production use Compatibility with WNMG 0804 inserts means fast indexable insert changes and broad grade options for different materials and cutting conditions. The holder’s design supports a wide range of turning tasks where left‑hand engagement is required, from finishing grooves to light roughing passes. As a standardised tool, it enables straightforward stock management and quick replacement in multi‑machine environments, supporting predictable scheduling and lower downtime. Contact Metav Werkzeuge for tailored advice on integrating this tool into production and to secure supply from Emmerich — phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: P372TM Brand: Teknik Makina Designation: PWLN for WNMG indexable inserts ISO designation: S32T PWLNL Dimensions / Core data Shank diameter: 32 mm Diameter: 40 mm Overall length: 300 mm Cutting height: 60 mm Cutting angle: 95° Weight: 1.764 kg Special features Compatible inserts: WNMG 0804 Cutting direction: left Clamping holder designation: 08 FAQ What insert size is required for this holder? The boring bar accepts WNMG 0804 indexable inserts; the holder geometry is matched to this insert size for correct seating and chip control. Is the tool suitable for left‑hand turning only? Yes — the bar is a left‑hand design and is intended for operations where left‑hand cutting is required. What is the ISO designation of the tool? The tool carries the ISO code S32T PWLNL, which defines the shank and holder style for standard tool posts. Can grades and coatings of inserts be varied for different materials? Different grades and coatings for WNMG 0804 inserts can be selected to suit specific materials and cutting speeds while using this holder. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the robust S32T PWLNR design combined with compatibility for WNMG 0804 indexable inserts to secure stable turning and predictable tool life. Take advantage of the 32 mm shank and 300 mm overall length for deeper machining with reduced vibration — order via Metav Werkzeuge or consult the team for tailored application advice. Boring bar PWLN for WNMG indexable inserts (S32T PWLNR, 32 mm shank) by Teknik Makina The PWLN for WNMG indexable inserts is a right-hand boring bar engineered for secure turning with WNMG 0804 inserts in industrial and workshop turning applications S32T PWLNR design for stable clamping Compatible with WNMG 0804 indexable inserts 32 mm shank diameter for secure mounting 300 mm overall length for deep operations Stable clamping for consistent turning performance The S32T configuration delivers a compact, rigid toolholder geometry that promotes secure clamping and reduced chatter in interrupted cuts. With a 32 mm shank and the specified ISO designation, the holder provides standardised mounting that simplifies fixture selection and repeatability across setups. Using indexable inserts means only the cutting edge requires replacement, lowering downtime and enabling consistent component tolerances. Reach deeper with a balanced, vibration‑resistant design A 300 mm overall length combined with a 40 mm head diameter gives reach for deeper bores while maintaining a controlled mass distribution. The 95° cutting angle and a 60 mm cutting height support efficient chip control and stable engagement in right‑hand cuts. These dimensions make the tool suitable where extended reach is necessary without sacrificing surface finish or dimensional stability in the machined part. Simplified tool integration and predictable productivity Marked as S32T PWLNR, the bar fits common toolholders and complements workflows that rely on WNMG 0804 inserts. The standardised insert interface reduces setup complexity and enables quick insert changes to adapt to different materials and cutting conditions. The tool’s measured weight (approx. 1.764 kg) and nominal geometry aid in balancing considerations for spindle and turret operations, supporting steady cycle times. Practical guidance for selecting inserts and applications This boring bar accepts WNMG 0804 indexable inserts; the choice of insert grade and geometry determines cutting performance for specific materials and feeds. The right‑hand cutting direction aligns with standard lathe configurations. As the bar is a modular component, selecting an appropriate insert coating, grade and chipbreaker will tailor the combination to priorities such as tool life, surface finish or productivity without altering the holder. For secure, repeatable turning with a robust 32 mm shank and standard WNMG 0804 compatibility, contact Metav Werkzeuge for application guidance or to arrange procurement through Metav Werkzeuge GmbH in Emmerich Technical data SKU: P362TM Manufacturer: Teknik Makina Article designation: Boring bar PWLN for WNMG indexable inserts ISO designation: S32T PWLNR Facts Shank diameter: 32 mm Cutting height: 60 mm Overall length: 300 mm Head diameter: 40 mm Cutting angle: 95° Weight: 1.764 kg Cutting direction: right Special features Compatible with WNMG 0804 indexable inserts Right‑hand boring bar Clamping size: 08 FAQ What insert type does this boring bar accept? The boring bar accepts WNMG 0804 indexable inserts; the insert determines the cutting performance and material suitability. Is the bar suitable for deep bore operations? Yes. The 300 mm overall length and balanced geometry make the bar suitable for deeper turning operations while maintaining stability. What is the shank diameter and why does it matter? The shank diameter is 32 mm; a larger shank diameter improves clamping rigidity and reduces deflection during cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid 32 mm shank, compatibility with DC-- 11T3 indexable inserts and a precise 107.5° cutting angle for stable left‑hand boring; order the S32T SDQCL boring bar (K281TM) directly via Metav Werkzeuge or request advice from our consultants. S32T SDQCL Boring Bar (K281TM) — 32 mm Shank, 300 mm Length by Teknik Makina A S32T SDQCL boring bar engineered for left‑hand turning with DC-- 11T3 indexable inserts, suitable for medium‑duty CNC turning applications 32 mm sturdy shank for stable machining Compatible with DC-- 11T3 indexable inserts 300 mm overall length for deeper reach Left‑hand cutting orientation, 107.5° approach angle Reduced vibration and consistent surface finish through stiff mounting The boring bar is built around a 32 mm shank, providing increased rigidity that minimises deflection during moderate cantilever use. With a cutting height of 50 mm and a mass of 1.833 kg, the design balances stiffness and handling to deliver vibration‑reduced cuts and more consistent component geometry. Reduced chatter improves tool life and lowers rework rates, a tangible efficiency gain for production runs where repeatability matters. Fast indexable‑insert changes and predictable chip formation The tool is compatible with indexable inserts, specifically DC-- 11T3, allowing quick replacement without regrinding and therefore reduced downtime. The geometry, featuring a 107.5° cutting angle, is optimised for predictable chip flow and reliable edge engagement in left‑hand cutting operations. Indexable technology offers cost‑effective maintenance: worn inserts can be rotated or swapped in seconds, maintaining process stability across batches. Reach for deeper bores while retaining control An overall length of 300 mm and an outer diameter of 40 mm give the holder extended reach for internal operations and face bores where access is limited. The combination of length and a robust shank diameter helps maintain concentricity when working at depth; when longer reach is required, the tool’s dimensions make it suitable for setups that balance access and rigidity. This enables machining of stepped bores or operations where extended tool engagement is unavoidable. Reliable choice for workshop and small‑series production Manufactured by Teknik Makina, the holder is designed for routine use in workshops and small production cells where efficient insert changes and predictable performance are priorities. The left‑hand cutting orientation is advantageous for specific lathe setups and component orientations. Overall, the component is a pragmatic choice when a straightforward, serviceable indexable‑insert boring solution is needed, combining practical handling with stable cutting geometry. Contact Metav Werkzeuge for delivery options and technical advice on the Teknik Makina S32T SDQCL boring bar (K281TM) and to discuss compatibility with current CNC setups Technical Data SKU: K281TM Manufacturer: Teknik Makina ISO designation: S32T SDQCL English designation: SDQC for DC-- Indexable Inserts Dimensions & Weights Shank diameter: 32 mm Cutting height: 50 mm Overall length: 300 mm Diameter: 40 mm Weight: 1.833 kg Cutting angle: 107.5° Compatibility & Features Compatible inserts: DC-- 11T3 Cutting direction: left Clamp holder designation: 11 eClass: 21180806 FAQ What inserts fit this boring bar? The boring bar accepts DC-- 11T3 indexable inserts; the S32T SDQCL holder is machined to seat these inserts securely for predictable chip control. Is the cutting orientation left‑hand or right‑hand? This holder is manufactured for left‑hand cutting and is therefore suited to operations that require that orientation. What are the main dimensions to check for machine compatibility? Key dimensions are a 32 mm shank, 300 mm overall length and 40 mm body diameter; confirm these against the lathe’s tool post and overhang limits. Can this tool be used in small‑batch production? Yes, the S32T SDQCL’s use of indexable inserts and straightforward clamping makes it well suited to small‑series production where fast insert changes reduce downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid 32 mm shank and a long 300 mm overall length to improve stability and reach in deep boring operations; the SDQC clamping and compatibility with DC-- 11T3 indexable inserts reduce changeover time and support consistent surface quality. Order the tool directly via Metav Werkzeuge or contact their consultants for application advice. S32T SDQCR boring bar — SDQC clamping for DC-- 11T3 indexable inserts, 32 mm shank (Teknik Makina) The S32T SDQCR boring bar is a right-hand turning tool engineered for demanding lathe and CNC operations, combining a sturdy shank with an SDQC clamping interface to accept DC-- 11T3 indexable inserts for efficient insert changes and reliable chip control. 32 mm shank for rigid clamping Compatible with DC-- 11T3 indexable inserts 300 mm overall length for extended reach 107.5° cutting angle for stable cutting Stable machining through increased stiffness and predictable dynamics A substantial 32 mm shank diameter significantly raises bending resistance and reduces vibrational tendencies during deep cuts, which directly improves repeatable accuracy and surface finish. The tool’s 50 mm cutting-edge height contributes to a robust cutting head geometry that keeps the insert seated firmly in the SDQC clamp, decreasing the risk of chatter and the need for frequent rework. With a mass of 1.833 kg, the bar provides a balance between rigidity and manageable handling for setup and tool changes. Reduced downtime with standardised inserts and quick clamping The SDQC clamping arrangement is designed for efficient insert replacement and consistent seat positioning, making the bar ideal for production environments where throughput matters. Compatibility with DC-- 11T3 indexable inserts allows consolidation of insert stock across multiple toolholders, simplifying logistics and lowering inventory complexity. The right-hand cutting orientation matches common turning operations and keeps tooling layouts straightforward on the shop floor. Improved chip flow and cutting geometry for dependable material removal A 107.5° cutting angle yields predictable chip formation and deflection, supporting cleaner evacuation of chips from the cut and reducing thermal loading on the cutting edge. An outer diameter of 40 mm and the extended 300 mm overall length provide reach for internal and mid-depth turning while preserving sufficient rigidity near the cutting zone. These geometric choices help maintain cutting stability and enable consistent part tolerances under repeat production cycles. Practical integration and workshop benefits The ISO designation S32T SDQCR denotes a recognisable tool interface that eases replacement and cross-referencing in tooling lists. The bar’s design supports standard workshop workflows and can be deployed on conventional lathes and CNC turning centres without bespoke adapters. As a Teknik Makina product, the tool is intended to fit into established tool systems and to reduce set-up times through predictable mechanical interfaces and standard insert use. For reliable turning with a robust 32 mm shank and SDQC clamping, contact Metav Werkzeuge for tailored supply and technical guidance on integrating the Teknik Makina S32T SDQCR into existing production processes. Technical Data Article number: K152TM Manufacturer: Teknik Makina ISO designation: S32T SDQCR Facts Shank diameter: 32 mm Cutting-edge height: 50 mm Overall length: 300 mm Weight: 1.833 kg Cutting angle: 107.5° Outer diameter: 40 mm Cutting direction: Right-hand Special features SDQC clamping for DC-- 11T3 indexable inserts Compatible with DC-- 11T3 insert geometry Ideal for lathe and CNC turning applications FAQ Which inserts fit this boring bar? The bar accepts DC-- 11T3 indexable inserts; the SDQC clamping system secures the inserts for repeatable positioning. Is the S32T SDQCR suitable for right-hand turning only? Yes. The S32T SDQCR is specified for right-hand cutting and is optimised for conventional right-hand turning operations. What machine types is this tool designed for? The Teknik Makina boring bar is intended for use on lathes and CNC turning centres where extended reach and rigid clamping are required. How does the 107.5° cutting angle benefit machining? A 107.5° approach angle helps manage chip flow and reduces cutting forces at the insert edge, promoting consistent material removal and surface quality. Can the bar be integrated into existing tool inventories? The ISO-style S32T SDQCR interface and compatibility with standard DC-- 11T3 inserts simplify integration into common tooling systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of stable mounting, precise indexable-insert compatibility and a compact overall length to maintain machining consistency. Order the S32T SDUCL directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. Teknik Makina S32T SDUCL boring bar – SDUC for DC-- indexable inserts, left-hand cut, shaft Ø 32 mm A S32T SDUCL boring bar engineered for internal boring operations with SDUC indexable inserts, suited to left-hand cutting applications in precision turning and machining centres Left-hand cutting orientation Shaft Ø 32 mm for rigid setup Overall length 300 mm for compact reach Compatible with DC-- 11T3 indexable inserts Increase process efficiency with a purpose-built insert holder The boring bar is configured to accept SDUC style indexable inserts, offering a reliable conversion of insert geometry into predictable internal finishes. Thanks to the shaft diameter 32 mm, the holder provides enhanced rigidity that reduces vibration and stabilises chip formation, which in turn improves tool life and repeatability. Integration of this insert-style approach allows economical blade replacement without the need to regrind solid tools, supporting lean tooling strategies in production environments. Precision compatibility that simplifies tool selection and setup Designed around a clear insert fitment, the tool guarantees compatibility with DC-- 11T3 inserts and presents a cutting angle 93° that balances radial engagement and cutting force direction. The cutting edge height 45 mm is matched to common insert geometries so that insert clamping and seat datum are consistent, reducing setup time and the risk of alignment errors. These traits make the holder suitable for workshops seeking repeatable internal bore results with straightforward insert logistics. Practical handling and installation for fast changeover With an overall length 300 mm and a measured mass of 1.833 kg, the holder offers a compact footprint while remaining easy to handle during tool changes. The left-hand cutting orientation is clearly indicated to ensure correct mounting and rotation direction on the lathe or machining centre. The combination of measured dimensions and the insert system delivers a serviceable balance between accessibility in tight bores and the rigidity needed for finishing passes, therefore helping to shorten non-productive time without sacrificing surface quality. Contact Metav Werkzeuge for tailored guidance on integrating the S32T SDUCL boring bar into existing tool inventories and to confirm the best DC-- 11T3 insert grades for specific materials Technical data SKU: K263TM ISO designation: S32T SDUCL Type: SDUC for DC-- Indexable Inserts Manufacturer: Teknik Makina Facts Shaft diameter: 32 mm Cutting edge height: 45 mm Overall length: 300 mm Weight: 1.833 kg Cutting angle: 93° Diameter: 40 mm Compatible inserts: DC-- 11T3 Cutting direction: left Special features Left-hand cutting orientation Designed for SDUC indexable inserts Compact overall length for confined bores Robust shaft for improved stability FAQ What insert type does the holder accept? The holder is designed for SDUC-style indexable inserts and is specifically compatible with the DC-- 11T3 insert form. Is the cutting direction left-hand or right-hand? This boring bar uses a left-hand cutting orientation; ensure spindle rotation and clamping match the left-hand specification. What are the key dimensions for machine set-up? Key measured values are shaft diameter 32 mm, overall length 300 mm, cutting edge height 45 mm, and a cutting angle of 93°, which assist in fixture and turret planning. Can the tool achieve high rigidity in small bores? The 32 mm shaft diameter combined with the insert clamping design provides an improved rigidity-to-length ratio suitable for finishing and semi-finishing internal operations. What is the product SKU for ordering and reference? Order reference is K263TM; use this SKU when specifying the Teknik Makina S32T SDUCL boring bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust ISO design, a 32 mm shank and a 300 mm overall length for improved rigidity and predictable chip control; order directly via Metav Werkzeuge or consult our specialists for application support. S32T SDUCR Boring Bar – 32 mm shank, for SDUC indexable inserts (Teknik Makina) A S32T SDUCR boring bar engineered for right-hand cutting with SDUC-style indexable inserts, intended for external boring and turning tasks where stability and quick insert changes are essential. 32 mm shank for stable machining Compatible with DC-- 11T3 inserts 300 mm overall length for deep reaches Right-hand cutting with 93° approach angle Improved rigidity for consistent surface quality The bar's 32 mm shank and calculated overhang deliver increased stiffness, reducing deflection during heavy cuts and improving surface finish. With a 300 mm overall length and a mass of 1.833 kg, the design balances reach and stability so that chatter is minimised when used in properly rated holders. Stiff toolholding translates into fewer scrapped parts and more predictable cycle times, because a rigid set-up keeps the cutting edge on the intended path and reduces flank wear. Fast indexable insert changes and reliable chip control Built for SDUC-style indexable inserts, specifically DC-- 11T3, the boring bar accepts quick, repeatable insert changes that lower tooling downtime. The 45 mm cutting height ensures a positive seat for the insert and consistent chip flow. Indexable inserts offer cost-effective regrinding and replacement compared with brazed tools; the modular approach supports both rapid maintenance and inventory control in production environments. Geometry tuned for efficient metal removal A 93° cutting angle produces an approach that spreads cutting forces and helps evacuate chips efficiently, which benefits both tool life and component integrity. The tool is configured for right-hand cutting, fitting standard lathe orientations and insert geometries without the need for special adapters. In practice, this geometry reduces radial loading and often enables higher feed rates on suitable workpiece materials when combined with correct speeds. Practical handling and application guidance Clamping provisions correspond to holder size 11, allowing secure fixation and repeatable runout performance; attention to correct torque and clean contact surfaces will preserve accuracy. When extended reach is necessary, consider the relationship between overhang and rigidity: a shorter overhang improves results, while the provided 300 mm length permits access to deeper features when required. Metav's supply chain supports consistent availability and a quality filter based in Emmerich for European customers seeking dependable metrology and tooling solutions. For reliable, precision boring with Teknik Makina components, contact Metav Werkzeuge in Emmerich for tailored advice and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K134TM Manufacturer: Teknik Makina ISO designation: S32T SDUCR Core technical data Shank diameter: 32 mm Cutting height: 45 mm Overall length: 300 mm Weight: 1.833 kg Diameter: 40 mm Cutting angle: 93° Cutting direction: right Special features For indexable inserts: DC-- 11T3 Compatible with SDUC indexable inserts Clamping holder designation: 11 Right-hand tool configuration FAQ Which inserts are compatible with this boring bar? This S32T SDUCR boring bar accepts SDUC-style indexable inserts, specifically the DC-- 11T3 format for secure seating and reliable chip control. Is the tool intended for right-hand cutting only? Yes — the bar is configured for right-hand cutting, matching common lathe orientations and insert geometries. What are the most important dimensions to consider when setting up? Key dimensions: shank diameter 32 mm, overall length 300 mm, cutting height 45 mm, and diameter 40 mm; overhang and holder rigidity will directly affect machining accuracy. Which holder size is required for safe clamping? The clamping provision corresponds to holder designation 11; use a holder that matches this specification and ensure proper torque for repeatable runout. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a stable combination of rigidity and reach: the bar’s 32 mm shank and 300 mm overall length deliver low vibration and consistent surface finish in deep internal turning; order directly via Metav Werkzeuge or contact our consultants for tailored advice. S32T SDXCR Boring Bar — boring bar for DC-- 11T3 indexable inserts, right-hand, 32 mm shank The S32T SDXCR boring bar is a right-hand tool designed for precision internal turning and extended-reach boring with indexable inserts Right-hand cutting orientation Compatible with DC-- 11T3 inserts 32 mm shank diameter for secure clamping 300 mm overall length for extended reach Reliable performance for precision internal turning The bar is engineered to provide stable cutting in internal turning operations: the combination of a 32 mm shank and a balanced mass distribution reduces chatter, which in turn improves dimensional accuracy and surface finish. With a 120° cutting angle, chip evacuation is promoted and insert life is extended under typical finishing and semi-finishing conditions. This configuration supports efficient machining cycles and predictable process results in production and workshop environments. Secure clamping and extended reach reduce rework A secure clamping interface and the solid 32 mm shank provide enhanced rigidity compared with slimmer holders, meaning less flex during deep bores. The 300 mm overall length offers reach into recessed features without compromising stability, so fewer setup changes are required. Reduced vibration leads to longer insert life and lower scrap rates—an economic advantage that supports faster throughput in small to medium series production. Fast insert changes and simplified tooling logistics Designed for use with DC-- 11T3 indexable inserts, the bar accepts a widely available insert form factor for rapid replacement and consistent cutting edges. Indexable technology minimises downtime because inserts can be rotated or changed without regrinding; tooling management becomes simpler and inventory more predictable. The bar’s ISO designation S32T SDXCR aligns it with established tooling families, easing integration into existing toolholders and processes. Built for workshop reliability and predictable supply The construction and geometry focus on dependable, repeatable results in industrial and trade settings. The robust design supports conservative feeds and speeds where surface quality is paramount, while the right-hand cut direction matches standard lathe configurations. Paired with Metav’s supply and quality filter in Emmerich, the tooling solution aims to combine technical suitability with reliable availability for precision workshops. For Teknik Makina quality and rapid supply from Metav Werkzeuge, request expert advice or tailored delivery via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application specifics and compatibility with existing tooling systems Technical data Article number: K474TM Brand: Teknik Makina ISO designation: S32T SDXCR Type: SDXCR for DC-- Indexable Inserts Cutting direction: Right Core dimensions Shank diameter: 32 mm Overall length: 300 mm Outer diameter: 40 mm Cutting height: 55 mm Cutting angle: 120° Weight: 1.833 kg Compatible insert: DC-- 11T3 Features Right-hand cutting orientation Compatible with DC-- 11T3 indexable inserts ISO series S32T SDXCR Long reach for deep internal turning FAQ What insert type suits this boring bar best? The bar is specified for DC-- 11T3 indexable inserts; this form factor fits the SDXCR pocket and permits fast insert changes. Is the bar suitable for deep internal boring? Yes — the 300 mm overall length and solid 32 mm shank provide the extended reach and rigidity required for many recessed bore operations. Which cutting direction does the tooling use? This holder is manufactured for right-hand cutting, matching standard lathe feed directions. How does the 120° cutting angle affect machining? A 120° cutting angle supports effective chip formation and distribution of cutting forces, which helps maintain surface quality during finishing passes. Can the bar be used with existing SDXCR tooling families? The ISO designation S32T SDXCR ensures compatibility with holders and clamping systems designed for this series and simplifies integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, ISO-classified tool that combines stable support and straightforward insert compatibility for efficient turning operations; the combination of a Ø32 mm shank, compatibility with VBMT 1604 inserts and a 300 mm overall length supports consistent cycle times. Order the K316TM directly via Metav Werkzeuge or consult the Metav team for application-specific setup and availability. Boring bar K316TM — SVQB for VBMT indexable inserts (left-hand, Ø40 mm) by Teknik Cutting Tools A Boring bar K316TM engineered to accept VBMT 1604 indexable inserts for robust turning tasks, offering stable geometry and ISO S32T SVQBL compatibility for workshop and production environments Left-hand cutting direction, 107.5° cutting angle Compatible with VBMT 1604 indexable inserts ISO S32T SVQBL designation with Ø32 mm shank 300 mm overall length, robust 1.79 kg weight Greater rigidity for repeatable turning quality The tool is built around a Ø32 mm shank that provides increased stiffness compared with smaller holders; this rigidity directly reduces deflection during interrupted cuts and contributes to a steadier surface finish. The 107.5° cutting angle is optimised to balance shear formation and chip control when paired with VBMT geometry, helping to maintain insert life. At 1.79 kg the assembly offers a robust feel without excessive mass, which aids stable spindle behaviour and predictable tool dynamics during cycle runs. Insert compatibility that speeds tool changes and reduces costs Acceptance of VBMT 1604 indexable inserts means rapid replacement and straightforward grade selection for varied workpiece materials. The ISO designation S32T SVQBL clarifies seat and mounting compatibility on modern toolposts, allowing straightforward cross-referencing with insert catalogs. Designed for left-hand cutting, this holder adapts to operations that require reverse cutting direction, while indexable inserts permit economical reuse of the carbide body by rotating or replacing only the cutting tips, supporting a favourable cost-per-part ratio. Practical dimensions to streamline setup and machine integration A 300 mm overall length and Ø40 mm body give a clear installation envelope for many lathe applications, easing reach into deeper bore operations while keeping vibration under control. The combination of measured geometry and standardised ISO interface simplifies tool changeover procedures, minimises downtime and supports consistent production flow. Supplied as a defined ISO holder, the design aligns with established workshop stocks and Metav’s logistics, ensuring reliable availability from the Emmerich quality hub. For tailored recommendations on the Teknik Cutting Tools K316TM or to arrange supply and delivery from Metav Werkzeuge in Emmerich, please contact Metav Werkzeuge for expert advice and availability. Technical data Article number: K316TM Brand: Teknik Makina Designation: SVQB for VBMT indexable inserts ISO designation: S32T SVQBL Numbers / Core technical data Shank diameter: 32 mm Overall length: 300 mm Body diameter: 40 mm Cutting height: 50 mm Cutting angle: 107.5° Weight: 1.79 kg Compatibility / Features Compatible inserts: VBMT 1604 Cutting direction: left ISO compatibility: S32T SVQBL SKU: K316TM FAQ Which insert size fits this tool? The K316TM boring bar by Teknik Cutting Tools is specified for VBMT 1604 indexable inserts, offering direct compatibility with that insert format. What are the main dimensions to consider for setup? The K316TM presents a Ø32 mm shank, Ø40 mm body diameter and a 300 mm overall length, which should be checked against turret clearance and holder reach. Is this tool suited for left-hand machining? Yes, the holder is configured for left-hand cutting and features a 107.5° cutting angle matched to VBMT cutting-edge geometries. What ISO designation identifies the holder type? The product is designated S32T SVQBL, enabling straightforward cross-reference to ISO holder standards and accessory lists. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid left‑hand boring bar with a 32 mm shank and 300 mm overall length for stable internal turning operations; the tool supports VCMT 1604 indexable inserts and combines precise geometry with robust clamping for consistent bore quality — available via Metav Werkzeuge or consult Metav’s specialists for technical guidance. K324TM S32T SVQCL Boring Bar (left‑hand) — for VCMT 1604 inserts, Ø32 mm shank K324TM S32T SVQCL is a left‑hand turning/boring bar designed for internal and facing operations with indexable inserts, optimised for workshop use and industrial turning centres Left‑hand cutting orientation Shank Ø 32 mm for high rigidity Compatible with VCMT 1604 inserts 300 mm overall length for deep reach Consistent bore quality through optimised rigidity The bar’s 32 mm shank and 300 mm overall length deliver a balance between reach and stiffness that reduces vibration during internal turning. Reduced chatter improves surface finish and extends insert life, which translates into lower tooling costs per part. The specified cutting angle of 107.5° helps control cutting forces in left‑hand operations, so the tool maintains concentricity in demanding bore and shoulder cuts. This mechanical stability is particularly beneficial in serial production, where repeatability and minimal rework are priorities. Insert compatibility and geometry that boost productivity Designed for VCMT 1604 indexable inserts, the holder accepts widely used carbide grades and geometries, enabling flexible process optimisation. The S32T SVQCL ISO designation indicates the shank and head configuration suitable for standard clamping systems; this simplifies toolholder selection at the machine and reduces setup time. With a cutting height of 50 mm and a head diameter of 40 mm, the geometry supports effective chip control and predictable cutting behaviour, helping to maintain cycle times and throughput. Workshop integration and safe handling for reliable use The tool’s weight of 1.786 kg and a clear left‑hand orientation make it straightforward to fit and check during tool changes. The explicit ISO designation and compatibility notes facilitate inventory management and spare‑part planning. For retrofit and replacement workflows, the bar’s conventional dimensions mean minimal adaptation of existing clamping systems; the listed clamp size (16) aligns with common holder fixtures. Practical handling and robust construction contribute to safer operation and steady machine performance across shifts. Contact Metav Werkzeuge today for tailored advice on Teknik Makina’s K324TM boring bar and to arrange reliable supply from our Emmerich warehouse Technical Data Article number: K324TM Product name: S32T SVQCL boring bar Brand: Teknik Makina Type designation: SVQC for VCMT indexable inserts ISO code: S32T SVQCL Core data Shank diameter: 32 mm Overall length: 300 mm Head diameter: 40 mm Cutting height: 50 mm Weight: 1.786 kg Cutting angle: 107.5° Special features Left‑hand cutting direction Suitable for VCMT 1604 inserts Clamp size: 16 Designed for internal turning and facing SKU: K324TM FAQ What insert type fits this boring bar? The boring bar is suited for VCMT 1604 indexable inserts; the S32T SVQCL configuration supports standard carbide VCMT geometries for general turning. Is the bar suitable for deep‑hole boring operations? With an overall length of 300 mm and a 32 mm shank, the K324TM offers reach for many internal machining tasks while maintaining sufficient rigidity for repeatable results. Which cutting direction does the tool support? The holder is configured for left‑hand cutting; the left‑hand orientation is specified in the S32T SVQCL code and in the product data. How does the cutting angle affect machining performance? The 107.5° cutting angle helps control cutting forces and chip flow in internal turning, improving tool life and surface finish when using the recommended inserts. What information is needed to replace an existing boring bar? Provide the SKU K324TM, the ISO code S32T SVQCL, and the clamp size (16) to ensure correct selection and compatibility with existing fixtures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 32 mm shank and compatibility with VCMT 1604 inserts for stable external turning and predictable chip behaviour; the 300 mm overall length and right-hand cutting orientation ensure accessibility in standard lathes. Order via Metav Werkzeuge or consult the technical team for a tailored specification. S32T SVQCR Boring Bar — SVQC holder for VCMT 1604, Ø32 mm shank (Teknik Makina) A S32T SVQCR boring bar designed as an SVQC-style external turning holder for VCMT 1604 indexable inserts, optimised for right-hand cutting in conventional and CNC lathes Shank Ø32 mm for high rigidity Compatible with VCMT 1604 indexable inserts 300 mm overall length for extended reach Cutting angle 107.5° for reliable chip flow Stable, precision-focused design for external turning The holder is engineered to combine rigidity and accessibility: the shank diameter of 32 mm and the 300 mm overall length offer a balance between stiffness and reach that reduces chatter and improves surface finish on external turning tasks. The ISO-style designation S32T SVQCR identifies a solid shank SVQC configuration that accepts common triangular inserts; this familiar interface simplifies tool planning and inventory. With a defined cutting angle of 107.5°, the geometry supports controlled chip guidance, which translates into consistent cycle times and fewer reworks for series production. The design is suitable for machining typical external contours where insert indexability and repeatability matter. Reliable insert clamping and chip management for efficiency This SVQC holder is matched to VCMT 1604 inserts and provides a cutting height of 50 mm, ensuring the insert sits at the correct centre height for standard toolpost setups. The listed clamp size 16 indicates a robust clamping interface that secures the insert during interrupted cuts and medium-depth turning, reducing the risk of movement under load. Effective chip flow is supported by the holder's 107.5° approach, which helps direct chips away from the workpiece and toolface to maintain tool life and reduce manual chip clearing. These factors combine to lower downtime and improve throughput in batch and single-piece workflows. Practical workshop benefits and support from a trusted supplier With a listed weight of 1.786 kg, the holder is easy to handle during tool changes while remaining substantial enough to damp vibrations. The SVQC configuration and compatibility with widely used VCMT 1604 inserts make this tool holder a straightforward addition to an existing tooling set-up, reducing the need for special inserts. As a commercial partner, Metav provides logistical reliability from Emmerich and a broad range of complementary tooling; this supply-chain proximity supports predictable lead times and quality assurance across the tool range. For operations seeking dependable repeatability and less scrap, the combination of mechanical stability and standard insert compatibility delivers practical gains on the shop floor. For specification queries or to request a tailored cutting strategy with this Teknik Makina SVQC holder, contact Metav Werkzeuge GmbH in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert advice and purchasing support Technical data Article number: K224TM Manufacturer: Teknik Makina ISO designation: S32T SVQCR Product type: SVQC holder for VCMT indexable inserts Facts Shank diameter: 32 mm Cutting height: 50 mm Overall length: 300 mm Diameter: 40 mm Weight: 1.786 kg Cutting angle: 107.5° Cutting direction: right Suitable for inserts: VCMT 1604 Clamp holder size: 16 Special features SVQC-style indexable-insert holder Designed for external turning / boring operations Right-hand cutting orientation Compatible with standard VCMT 1604 inserts Brand: Teknik Makina SKU: K224TM FAQ Which inserts fit this holder? The holder is designed for VCMT 1604 indexable inserts; compatibility is confirmed for the SVQC clamping geometry used with this style of insert. Is this a right- or left-hand tool? This SVQC holder is specified for right-hand cutting, indicated by the product geometry and cutting direction data. What is the shank size and why does it matter? The 32 mm shank diameter gives the holder rigidity needed to reduce vibration and improve surface finish during external turning operations. Can the holder reach recessed areas on longer workpieces? With a 300 mm overall length, the tool provides added reach for many external turning tasks while maintaining acceptable stiffness for medium-depth cuts. How heavy is the tool and is it easy to handle during tool changes? The tool has a weight of 1.786 kg, offering a balance between robustness and manageable handling for routine tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid boring solution that combines straightforward insert replacement with reliable geometry for consistent bore finishes; the result is efficient tool changes and predictable cycle times. Order the tool directly via Metav Werkzeuge or consult the technical team for application-specific setup. S32T SVUBR boring bar — SVUB for VBMT indexable inserts by Teknik Makina, right-hand, Ø40 mm, 300 mm S32T SVUBR boring bar designed for precise internal turning and boring with VBMT indexable inserts, suitable for industrial CNC lathes and turning centres Right-hand cutting orientation Compatible with VBMT 1604 inserts Ø40 mm cutting diameter 300 mm overall length Stable insert system for predictable cycle times The S32T SVUBR boring bar is built around compatibility with VBMT 1604 indexable inserts, enabling rapid insert changes and predictable tool life management. The use of standard insert formats keeps spare-part logistics simple and reduces machine downtime, which improves overall process efficiency on the shop floor. The modular approach means companies can invest in a single holder and cover multiple bore sizes by stocking a small set of inserts, translating into lower inventory complexity and faster set-up times. Rigidity and geometry that support repeatable bore quality A shaft diameter of 32 mm combined with a nominal cutting diameter of Ø40 mm provides the stiffness required for accurate material removal in demanding turning operations. The specified cutting height 50 mm and the 93° cutting angle contribute to stable cutting forces and controlled chip formation, which reduces chatter and preserves tool life. The bar’s weight of 1.822 kg reflects a balanced construction that assists in vibration damping without excessive overhang, helping to maintain concentricity and surface finish across repeated cycles. Workshop integration and application benefits With an overall length of 300 mm and a right-hand cutting orientation, this bar integrates directly into common lathe toolposts and clamping systems; the clamp designation 16 allows straightforward mounting and secure fixing. The ISO designation S32T SVUBR simplifies procurement and documentation, ensuring compatibility with existing tool libraries and CAM setups. The design suits everyday industrial turning tasks where quick indexable insert changes, reliable repeatability and easy identification of tool geometry are priorities, supporting steady production throughput. For application advice or to confirm fitment for a specific machine, contact Metav Werkzeuge to discuss the Teknik Cutting Tools S32T SVUBR specification and arrange supply from Emmerich. Technical data SKU: K209TM ISO designation: S32T SVUBR Compatible inserts: VBMT 1604 Cutting direction: right Facts Shaft diameter: 32 mm Cutting height: 50 mm Overall length: 300 mm Cutting diameter: Ø40 mm Weight: 1.822 kg Cutting angle: 93° Special features Designed for VBMT indexable inserts Clamp designation: 16 Right-hand boring bar Brand: Teknik Makina FAQ What insert size fits this boring bar? The bar is specified for VBMT 1604 indexable inserts and will accept standard VBMT 1604 geometries for economical replacement and straightforward stock management. Is the cutting direction right-hand or left-hand? This model is a right-hand boring bar, indicated in the technical data and suitable for conventional right-hand turning operations. What are the key dimensions for planning tool set-up? Key dimensions include a shaft diameter of 32 mm, overall length 300 mm, cutting height 50 mm and cutting diameter Ø40 mm, which aid in fixture and collision planning. Can this bar be integrated into existing tooling systems? The S32T SVUBR carries a common ISO designation and a clamp designation of 16, facilitating integration with standard clamping units and lathe toolposts Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of rigid 32 mm shank and precise insert seating for VCMT 1604, which together deliver stable left-hand turning and consistent surface finish; order directly via Metav Werkzeuge or request specialist advice from our consultants. SVUC for VCMT Indexable Inserts – S32T SVUCL boring bar, 32 mm shank, left-hand The SVUC for VCMT Indexable Inserts is a left-hand boring bar designed for secure clamping of VCMT 1604 indexable inserts in external turning operations, offering extended reach and repeatable positioning. Left-hand cutting orientation 32 mm shank for rigid clamping For VCMT 1604 indexable inserts 300 mm overall length for extended reach Greater rigidity for consistent turning results The boring bar is engineered around a 32 mm shank, which increases stiffness at the toolholder interface and reduces vibration during cutting. This rigidity translates into improved surface finish and longer insert life, because the insert seating remains stable under cutting forces. The ISO designation S32T SVUCL indicates the standardised shank form and mounting geometry, which supports compatibility with a wide range of commercial toolholders. For workshops focused on predictable cycle times, the combination of shank size and secure clamping reduces rejects and rework. Clear fit and effective chip control with VCMT 1604 inserts Compatibility with VCMT 1604 indexable inserts means the toolholder accepts a commonly stocked insert form, keeping tooling costs and changeover times low. The geometry provides a cutting height of 50 mm and a 93° cutting angle, which together influence chip flow and radial engagement; the result is controlled chip evacuation and stable cutting when working on external diameters. As indexable inserts are replaced rather than re-sharpened, maintenance is quick and repeatable, supporting high uptime in production environments while preserving dimensional accuracy across batches. Practical handling and workshop integration With an overall length of 300 mm and a nominal tool diameter of 40 mm, the bar offers reach for deeper shoulders and extended external work while keeping balance suitable for rigid setups. The unit weighs 1.833 kg, which aids stable seating but still allows straightforward handling during insert changes. Left-hand orientation is matched to specific lathe feed directions; when combined with proper toolholder selection the arrangement minimises chatter and supports consistent tolerances. The design supports efficient workflows by simplifying insert indexing and repeatable clamping. Contact Metav Werkzeuge for tailored advice on Teknik Makina’s S32T SVUCL boring bar and ensure optimal toolholder selection from our Emmerich quality stock; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K306TM Manufacturer: Teknik Makina Product name: SVUC for VCMT Indexable Inserts ISO designation: S32T SVUCL Core dimensions Shank diameter: 32 mm Cutting height: 50 mm Overall length: 300 mm Diameter: 40 mm Weight: 1.833 kg Cutting angle: 93° Design & compatibility Compatible inserts: VCMT 1604 Cutting direction: left-hand Designation: SVUC for VCMT Indexable Inserts SKU: K306TM Manufacturer: Teknik Makina FAQ What inserts fit this boring bar? The SVUC for VCMT Indexable Inserts is designed specifically for VCMT 1604 indexable inserts, allowing straightforward replacement and standardised insert stock across the workshop. Is the bar suitable for deep external turning? The 300 mm overall length and 40 mm tool diameter make this boring bar suitable for extended reach external turning applications while maintaining sufficient rigidity for medium-duty cuts. What does left-hand cutting direction mean in practice? Left-hand cutting direction indicates the insert orientation and feed direction required on the lathe; the SVUC holder is intended for operations where the tool advances from the chuck towards the tailstock in a left-hand feed. How does the shank diameter affect performance? A 32 mm shank increases stiffness in the toolholder assembly, reducing vibration and helping to maintain surface finish and dimensional accuracy during cutting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, right-hand SVUC toolholder with a Shaft Ø 32 mm and compatibility with VCMT 1604 indexable inserts for efficient, repeatable internal machining — order directly via Metav Werkzeuge or consult our specialists for tailored support. Boring bar SVUC for VCMT indexable inserts — Teknik Makina, rigid toolholder with 32 mm shaft and 300 mm length Boring bar SVUC for VCMT indexable inserts offers a compact, purpose-built solution for internal turning and boring where stiffness and reliable insert seating are essential Right-hand cutting orientation Shaft Ø 32 mm for enhanced rigidity Compatible with VCMT 1604 inserts Overall length 300 mm for deep reach Increased stability for better surface finishes The S32T SVUCR configuration provides a stout, well-balanced holder that reduces chatter and improves concentricity during internal operations. With a Shaft Ø 32 mm and Overall length 300 mm, the assembly keeps deflection to a minimum so the toolholder transfers cutting forces efficiently into the machine. The listed weight 1.833 kg contributes to a predictable dynamic behaviour, which results in more consistent component tolerances and prolonged insert life. For workshops seeking measurable improvements in cycle-time reliability, the combination of shaft diameter and mass offers a clear advantage in rigidity over slimmer alternatives. Fast, economical machining with standard indexable inserts Engineered for use with VCMT 1604 indexable inserts, the toolholder accepts common insert sizes for quick changes and predictable cutting geometry. The cutting angle 93° and cutting edge height 50 mm ensure correct seating and alignment of the insert, reducing setup time and the risk of incorrect clamping. Using indexable inserts keeps consumable costs transparent and enables targeted selection of grades for specific operations. In practical terms, the design supports efficient material removal rates and repeatable surface quality while keeping tooling overhead low. Practical range and safe clamping for workshop use Designed for right-hand operations, the toolholder’s Right-hand cutting orientation and nominal diameter 40 mm shank offer compatibility with a wide range of toolposts and holders. The specified clamping interface (designation 16) facilitates secure fixation and simple set-up when pairing with standard clamping systems. The robust geometry simplifies alignment checks and reduces the need for frequent reworking. For production environments that value uptime, the holder’s straightforward configuration supports rapid insert replacement and predictable maintenance cycles, contributing to smooth shop-floor throughput. Speak to Metav Werkzeuge for specification advice on Teknik Makina boring bars and secure reliable supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K214TM ISO designation: S32T SVUCR Type: SVUC for VCMT indexable inserts Brand: Teknik Makina Facts Shaft diameter: 32 mm Shank/outer diameter: 40 mm Overall length: 300 mm Cutting edge height: 50 mm Cutting angle: 93° Weight: 1.833 kg Cutting direction: right Clamping designation: 16 Special features For VCMT 1604 indexable inserts S32T SVUCR configuration Right-hand orientation Robust, stiff construction Quick insert replacement FAQ Which inserts fit this boring bar? The boring bar is specified for VCMT 1604 indexable inserts; the geometry and seating are matched to that insert form for secure clamping and correct cutting height. Is the holder suitable for deep internal boring? With an Overall length 300 mm and Shaft Ø 32 mm, the holder is intended for deeper reach where increased rigidity is required compared with slimmer bars. What is the orientation of the cutting edge? The toolholder is configured for right-hand cutting, which should be selected according to the lathe or turning machine’s setup and the intended machining direction. How does the tool ensure insert alignment? The cutting edge height 50 mm and cutting angle 93° provide a defined seating plane and repeatable alignment for VCMT inserts, minimising set-up variation. What identifiers should be quoted when enquiring? Quote the SKU K214TM, the ISO designation S32T SVUCR, and the brand Teknik Makina to ensure precise correspondence. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of rigidity, compatibility with KNUX 1604 indexable inserts and a compact 32 mm shank for reliable internal turning operations; order the tool via Metav Werkzeuge or consult our specialists for application advice. Boring bar S32U CKUNR (CKUNR for KNUX Indexable Inserts) — right‑hand, 32 mm shank, 350 mm overall length The boring bar S32U CKUNR is a right‑hand internal turning tool designed for use with KNUX 1604 indexable inserts, suitable for medium to heavy finishing operations on CNC lathes High rigidity 32 mm shank Compatible with KNUX 1604 inserts 350 mm overall length for deep bores Right‑hand cut direction Increased stability for accurate internal turning A solid design with a 32 mm shank and a mass of 2.264 kg reduces vibration and runout for more consistent bore diameters. The tool's geometry, including the cutting angle of 93°, improves insert support and chip flow, which together enhance surface finish and dimensional repeatability. For workshops aiming to reduce rework, the emphasis on mechanical stability translates directly into fewer rejects and shorter cycle‑time variance. Designed for fast insert changes and continuous production Compatibility with KNUX 1604 indexable inserts simplifies maintenance and minimises downtime: worn edges are replaced quickly rather than regrinded, improving throughput. The S32U CKUNR specification denotes a standard interface that integrates cleanly with common clamp systems, while the 52 mm cutting height and 40 mm nominal diameter provide a balance between cutting capacity and access in constrained bores. These features support efficient shift planning and predictable tool life. Practical fit for a range of machining tasks With a 350 mm overall length, this boring bar reaches deeper bores without compromising stiffness, making it suitable for internal finishing and light roughing on medium‑sized components. The right‑hand cutting direction suits conventional lathe setups and simplifies programming for automated sequences. As a result, production engineers find it easier to specify this bar where dependable, repeatable internal turning is required with indexable insert convenience. For tailored application advice or to confirm compatibility with existing holders, contact Metav Werkzeuge — Teknik Cutting Tools' RK754TM boring bar can be evaluated with our specialists via info@metav-werkzeuge.com or by phone at +49 2822 7131930, directly from Emmerich. Technical Data Article number: RK754TM Manufacturer: Teknik Cutting Tools / Teknik Makina Type designation: S32U CKUNR Description: CKUNR for KNUX Indexable Inserts Weight: 2.264 kg Data Shank diameter: 32 mm Cutting height: 52 mm Nominal diameter: 40 mm Overall length: 350 mm Cutting angle: 93° Special features Right‑hand cutting direction Compatible with KNUX 1604 indexable inserts ISO style S32U CKUNR Designed for internal turning and boring FAQ Which inserts fit this boring bar? The boring bar accepts KNUX 1604 indexable inserts; the CKUNR mounting form matches the insert pocket and clamp geometry used for that series. Is the bar suitable for deep‑bore applications? Yes, the 350 mm overall length of the RK754TM boring bar offers reach for deeper bores while retaining practical stiffness for finishing operations. What is the shank size and why does it matter? The tool has a 32 mm shank, which provides increased rigidity compared with smaller diameters and helps to reduce vibration and dimensional deviation in internal cuts. Can this bar be used for roughing as well as finishing? The design is appropriate for light roughing and finishing; pairing the bar with the correct KNUX grade insert allows adaptation to either higher material removal rates or superior surface quality. Which cutting direction does the tool use? This model is specified for right‑hand cutting, compatible with standard CNC lathe programmes and tool cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of rigid clamping, precise geometry and insert compatibility for dependable external turning operations; the 32 mm shank and compatibility with CN-- 1606 inserts ensure repeatable results. Order the boring bar directly via Metav Werkzeuge or consult the team for application advice. Bohrstange DCLN for CN-- Indexable Inserts — S32U DCLNR, 32 mm shank (Teknik Makina) The Bohrstange DCLN for CN-- Indexable Inserts is a right-hand external boring bar designed for turning operations that accept CN-- 1606 indexable inserts. Right-hand cutting for turning operations ISO designation S32U DCLNR 32 mm shank for rigid clamping Compatible with CN-- 1606 indexable inserts Stable, repeatable external turning with a rigid shank The boring bar is engineered to deliver consistent turning performance through a robust 32 mm shank that reduces deflection under load. With an overall length of 350 mm and a moderate weight of 2.272 kg, the tool balances accessibility with stability, supporting controlled cutting forces during external turning. This geometry is particularly beneficial when machining long workpieces or when aiming to maintain tolerance across multiple components, as the reduced vibration directly improves surface finish and dimensional repeatability. Secure clamping and reliable seating of inserts The tool’s S32U DCLNR ISO designation describes a secure shank-to-body interface and a cutter head geometry optimised for indexable inserts. The bar accepts CN-- 1606 plates and works with a clamp-holder reference of 16, which together provide positive insert retention and straightforward index changes. The clear-cut arrangement reduces setup time and minimises the risk of insert movement during interrupted cuts, resulting in fewer downtime interruptions and more predictable cycle times on production lathes. Geometry and cutting behaviour explained for process planners A 95° cutting angle and a 60 mm cutting height create a robust contact geometry that supports effective chip formation and controlled cutting loads on the insert edge. The right-hand cutting orientation suits conventional lathe arrangements and ensures predictable chip flow away from the operator and machine tool. These parameters translate into practical benefits: longer insert life where cutting conditions match the geometry, and easier process tuning when integrating the tool into existing turning cycles. Practical fit for workshop workflows and industrial production Designed as a production-ready turning tool, the bar combines a clear standard designation with simple insert compatibility to streamline inventory and tool management. The compatibility with widely used CN-- 1606 inserts simplifies procurement and reduces the number of unique spare parts required. For workshops aiming to centralise tooling without sacrificing performance, the bar offers a pragmatic balance between rigidity, accessibility and interchangeability that supports steady throughput and lower process variability. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina boring bar S32U DCLNR (SKU K370TM) and secure reliable supply from our Emmerich hub Technical Data Article number: K370TM Manufacturer: Teknik Makina ISO designation: S32U DCLNR Product type: DCLN boring bar for indexable inserts Facts Shank diameter: 32 mm Cutting height: 60 mm Overall length: 350 mm Diameter: 40 mm Weight: 2.272 kg Cutting angle: 95° Cutting direction: right Special features Compatible with CN-- 1606 indexable inserts Clamp holder reference: 16 Right-hand external turning application Robust geometry for reduced deflection FAQ What type of inserts does this boring bar accept? The boring bar accepts CN-- 1606 indexable inserts; this compatibility simplifies insert sourcing and replacement during turning operations. Is the tool suitable for production lathes with standard holders? Yes, the S32U DCLNR designation and 32 mm shank make the bar compatible with common clamping systems; verify the holder size matches the shank and clamp reference. What is the cutting direction of the bar and what does this mean in practice? The bar is a right-hand cutting tool, which means the cutting action is produced when the workpiece rotates and the tool feeds from right to left in most conventional lathe setups. How does the 95° cutting angle affect machining? A 95° cutting angle gives a sturdy cutting geometry that supports good chip control and load distribution, which can extend insert life under appropriate cutting conditions. What is the SKU and manufacturer information for ordering? This item is listed as SKU K370TM and is manufactured by Teknik Makina; use the SKU to ensure precise ordering and stock checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, 40 mm diameter and a secure M16 screw-in connection for stable, repeatable machining results; order directly via Metav Werkzeuge or consult our specialists for application advice. Screw-in milling cutter VT229-1TM – 40 mm diameter with internal coolant (Teknik Makina) The Screw-in milling cutter VT229-1TM is engineered for use with APMT 0903 indexable inserts, delivering coolant-fed chip control and robust mechanical stability for demanding finishing and semi-finishing operations. 40 mm diameter for stable cutting Internal coolant for improved chip evacuation Six cutting edges for even load distribution M16 screw-in connection for secure mounting Greater process reliability through stable geometry The combination of a 40 mm diameter body and six cutting edges provides a well-balanced cutter that minimises vibration and ensures consistent surface quality. The geometry supports even load distribution across the insert pockets, which reduces chatter and extends the effective life of indexable inserts. In practical terms, this stability translates into fewer rejects and more predictable cycle times on serial parts, improving overall process reliability in CNC milling applications. Improved cooling and chip management for longer tool life This tool features internal coolant, routed directly to the cutting zone to support controlled chip formation and quicker heat dissipation. Direct coolant supply helps prevent built-up edge and reduces thermal softening of the insert, which in turn maintains cutting performance across longer production runs. For operators transitioning from external coolant setups, the internal feed simplifies fixturing and reduces the need for high-pressure external nozzles while enhancing the consistency of chip evacuation. Secure assembly and quick serviceability on the shop floor A robust M16 screw-in connection ensures the cutter seats reliably in standard holders, making clamping repeatable and simple. The cutter uses a Torx screw (M2.5x5.5) tightened with a T8 key for insert retention, enabling rapid insert changes and low maintenance downtime. With a total length of 65.3 mm and a cutting length of 40 mm, the tool is suitable for a range of workpieces where compact reach and rigid support are required. The design is compatible with APMT 0903 indexable inserts from Korloy, offering flexibility in insert grades for different materials and cutting conditions. Practical benefits for procurement and production planning Suppliers and production engineers will appreciate the straightforward interface: standard mounting thread, common insert family and coolant integration reduce the number of variants to stock while supporting reliable tool performance. The cutter’s moderate mass (0.299 kg) keeps dynamic loads low, aiding machine life and lowering spindle wear risk. Choosing this type of screw-in cutter helps streamline tool management and supports predictable maintenance intervals, a decisive factor for continuous manufacturing environments. Contact Metav Werkzeuge for availability and tailored application recommendations — Metav Werkzeuge in Emmerich provides direct supply and expert advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VT229-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Key dimensions Diameter: 40 mm Total length: 65.3 mm Cutting length: 40 mm Thread / connection: M16 Weight: 0.299 kg Cutting edges: 6 Special features Internal coolant: yes Compatible inserts: APMT 0903 (Korloy) Torx screw: M2.5x5.5 with T8 key SKU: VT229-1TM FAQ Which indexable inserts are compatible with this cutter? The VT229-1TM is designed for APMT 0903 indexable inserts and is specified to work with Korloy inserts in that family. Does the cutter support coolant supply? Yes, the cutter features internal coolant, which delivers fluid directly to the cutting zone for improved chip control and heat management. What is the connection type for mounting? Mounting is by an M16 screw-in connection, which provides a secure and repeatable seat in compatible holders. How many cutting edges does the tool have and what is the cutting length? The tool has six cutting edges and a cutting length of 40 mm, suitable for finishing and semi-finishing passes where stability is important. Which tools are required for insert replacement and maintenance? Insert retention uses a Torx screw (M2.5x5.5) tightened with a T8 key, enabling fast insert changes and straightforward maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision thread-in milling holder that combines secure insert clamping and straightforward servicing to keep production moving; its M16 thread and compatibility with BLMP 0603 indexable inserts ensure reliable performance and easy tool changes — order directly via Metav Werkzeuge or consult our specialists for integration advice. VT195TM Screw-in milling cutter — 40 mm diameter, for BLMP 0603 indexable inserts (Teknik Makina) The VT195TM screw-in milling cutter is a compact, threaded milling holder designed for light-to-medium finishing and roughing operations where secure insert clamping and short overhang are required 40 mm diameter for robust cutting M16 threaded holder for secure mounting Compatible with BLMP 0603 indexable inserts Torx M3x6.5 screw with T8 key for fast changes Secure insert clamping reduces downtime and rejects A thread-in holder with a robust M16 thread and precise insert seat offers consistent repeatability and low runout. The combination of a dedicated clamping screw (Torx M3x6.5) and the matching T8 key ensures that BLMP 0603 inserts are retained securely, reducing the risk of loosening under interrupted cuts. For production environments this means fewer stoppages for rework and a measurable improvement in machine uptime — a practical advantage for shops focused on reliable throughput. Geometry engineered for efficient material removal The tool’s 100° cutting angle and 2 cutting edges balance chip formation and surface finish, enabling efficient metal removal with predictable forces. The 40 mm diameter provides a stable contact radius that aids heat dissipation and reduces vibration in medium-duty milling tasks. In practice, the geometry translates into shorter cycle times for comparable operations and consistent surface quality, which supports tighter production schedules and reduces the need for additional finishing passes. Compact design for constrained tool stations With a 68 mm overall length, 25 mm thread height and 25 mm cutting height, the holder minimises overhang and helps maintain tool rigidity in confined setups. The lightweight construction (approx. 0.044 kg) eases handling during tool changes and lessens centrifugal load at higher spindle speeds. These dimensional advantages make the thread-in cutter well suited to multi-spindle heads or setups where tool-to-tool clearance is limited, providing a reliable option for retrofitting existing toolholders without major layout changes. Broad compatibility and practical workshop benefits Engineered for use with indexable inserts from leading suppliers, the holder accepts BLMP 0603 inserts and is listed as compatible with Taegutec grades, offering flexibility in grade and geometry selection to match specific materials and cutting conditions. The straightforward maintenance—single Torx screw removal for insert replacement—keeps servicing simple and rapid. Combined with Metav’s distribution and stock depth, the component is presented as a practical building block for workshops seeking dependable, easy-to-service tooling that integrates with established insert families. For tailored advice on integrating the Teknik Makina VT195TM screw-in milling cutter into existing setups and to arrange prompt supply through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — reliable delivery and application support from Emmerich are available. Technical data SKU: VT195TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter (threaded holder) Compatible inserts: BLMP 0603 (indexable inserts) Compatible insert manufacturer: Taegutec eClass: 21180806 ETIM: EC011860 Dimensions and numbers Diameter: 40 mm Overall length: 68 mm Thread: M16 Thread height: 25 mm Cutting height: 25 mm Number of cutting edges: 2 Cutting angle: 100° Weight: 0.044 kg Features and compatibility Torx screw: M3x6,5 Torx key size: T8 For BLMP 0603 indexable inserts Manufacturer: Teknik Makina Files (product documentation): referenced in system FAQ Which indexable inserts fit this holder? The holder accepts BLMP 0603 indexable inserts; insert geometry and size must match the BLMP 0603 seat to ensure correct clamping and cutting performance. Is the holder compatible with Taegutec inserts? Yes — the VT195TM is listed as compatible with Taegutec inserts of the BLMP 0603 designation, enabling selection of grades for specific materials. What screw and key are required for insert changes? Insert clamping uses a Torx M3x6.5 screw and the matching T8 Torx key for reliable and fast insert replacement. What are the key dimensions affecting rigidity? Relevant dimensions include the 40 mm diameter, 68 mm overall length and 25 mm thread height — these reduce overhang and support rigidity in compact setups. How many cutting edges does the tool provide and what is the cutting angle? The tool is configured with 2 cutting edges and a 100° cutting angle, balancing chip control and surface finish for many finishing and light roughing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine dependable mounting and wide insert compatibility for uninterrupted production: the screw-in milling cutter accepts EPMT 0603 indexable inserts, features a 40 mm cutting diameter and an M16 screw connection for secure clamping. Order the screw-in milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Einschraubfräser VT235TM — screw-in milling cutter, 40 mm diameter, M16 thread (Teknik Makina) The Einschraubfräser VT235TM is a screw-in milling cutter designed for use with EPMT 0603 indexable inserts and compatible with Hitachi insert systems, intended for industrial indexable-insert milling applications. 40 mm cutting diameter M16 screw-in connection 6 cutting edges for stable cutting Compatible with EPMT 0603 inserts (Hitachi) Reliable indexable-insert performance for demanding tasks The VT235TM offers a consistent package for indexable-insert milling: with a 40 mm diameter and 6 cutting edges, the tool provides a robust cutting front that helps maintain process stability under repetitive load. The 93° cutting angle defines the approach geometry and supports predictable chip formation; this reduces the risk of unexpected workpiece forces and extends Insert life. Compatibility with EPMT 0603 inserts ensures access to a wide range of grades and geometries, so machinists can select the optimum insert for steel, alloy or general-purpose applications without changing the holder. Secure mounting and service-friendly assembly Mechanical stability begins with the connection: the M16 thread secures the tool to the spindle or adapter while a thread height of 34.7 mm gives a reliable engagement length. The cutter’s overall length of 60 mm and modest mass of 0.256 kg balance rigidity with manageable handling during tool changes. The insert is fixed by a Torx screw M2.5x5.5 (Torx key T7), a commonly available fastener size that simplifies maintenance and shortens changeover times. A 25.3 mm cutting-height provides sufficient tool engagement for many indexable-insert set-ups while keeping insert clamping straightforward. Shop-floor integration and predictable tooling inventory Standardisation matters: using a holder that accepts EPMT 0603 inserts and is compatible with Hitachi systems reduces the number of spare insert types required in the tool crib. The compact dimensions and standard M16 thread allow straightforward integration with existing adapters and machine tool interfaces. For procurement and logistics, the tool’s technical specifications support transparent purchasing decisions and enable planners to match holder-to-insert combinations quickly, helping to reduce set-up time and increase machine uptime. Contact Metav Werkzeuge today for technical clarification on the Teknik Cutting Tools screw-in milling cutter VT235TM and to confirm stock availability and delivery from Emmerich. Technical Data Article number: VT235TM Name: Screw-in milling cutter for EPMT 0603 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 40 mm Overall length: 60 mm Thread: M16 Thread length: 34.7 mm Cutting height: 25.3 mm Cutting edges: 6 Cutting angle: 93° Weight: 0.256 kg Special features Compatible with EPMT 0603 inserts (Hitachi) Torx screw M2.5x5.5, Torx key T7 Designed for indexable-insert systems FAQ Which inserts does the cutter accept? The screw-in milling cutter VT235TM accepts EPMT 0603 indexable inserts and is compatible with Hitachi insert systems. What is the mounting thread and engagement length? The holder uses an M16 thread with a thread height of 34.7 mm, providing secure engagement for standard adapters. How many cutting edges does the tool have and what is the diameter? The tool has 6 cutting edges and a cutting diameter of 40 mm, offering a balance of metal removal and stability. What fastener is required to secure the insert? Insert clamping requires a Torx screw M2.5x5.5 and a Torx key T7 for assembly and replacement. What are the overall dimensions and weight for handling considerations? Overall length is 60 mm and the tool weight is 0.256 kg, supporting easy handling during tool changes and set-up. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable mounting, efficient chip evacuation and quick indexable-insert changes for uninterrupted production. The screw-in milling cutter offers internal coolant and a robust M16 thread, ensuring consistent performance; order directly via Metav Werkzeuge or consult the technical team for configuration advice. Screw-in milling cutter VT235-1TM — Ø 40 mm, internal coolant, for EPMT 0603 indexable inserts (Teknik Makina) A robust screw-in milling cutter designed for secure mounting and efficient coolant delivery in medium-duty milling operations. Screw-in design for fast head changes Ø 40 mm body for stable cutting Internal coolant for improved tool life Compatible with EPMT 0603 Hitachi inserts Maximise productivity with fewer interruptions The screw-in milling cutter is built to reduce non-cutting time and extend insert life. With six cutting edges and compatibility with EPMT 0603 indexable inserts, the system enables multiple indexings before replacement, lowering per-part tooling costs. Integrated internal coolant directs lubricant and coolant to the cutting zone, which improves heat dissipation and chip evacuation; this leads to more consistent surface finishes and reduced downtime. The result is a measurable increase in throughput for repetitive milling tasks and serial production. Rigid mounting and straightforward maintenance A secure M16 thread and a compact 60 mm overall length create a rigid connection between cutter and holder, reducing chatter during interrupted cuts. The Ø 40 mm tool body provides a stable platform for radial engagement, while the 25.3 mm cutting-edge height supports substantial depth of cut where indexable inserts are used. The head is fastened with a Torx screw ( M2.5x5.5 ), operable with a T8 key, allowing quick insert changes and minimised machine downtime. This combination of mechanical integrity and serviceability supports repeatable process results on the shop floor. Compatibility and practical workshop benefits Designed by Teknik Makina and supplied as VT235-1TM, the cutter accepts EPMT 0603 inserts from Hitachi, simplifying procurement and inventory management when that insert family is standard in the toolroom. Weighing 0.256 kg, the unit is easy to handle during set-up yet robust in operation. The internal coolant channel supports through-cutter delivery, which is especially beneficial where chip control and edge cooling are critical. Overall, this tool body balances operational resilience with low-changeover effort, making it a pragmatic choice for production environments seeking consistent milling performance. For a tailored configuration or to purchase the Teknik Makina screw-in milling cutter VT235-1TM, contact Metav Werkzeuge in Emmerich for fast delivery and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT235-1TM Manufacturer: Teknik Makina Product type: screw-in milling cutter Label: 40mm screw-in milling cutter EPMT 0603 L60mm with internal coolant Facts Diameter: 40 mm Overall length: 60 mm Thread: M16 Thread height: 34.7 mm Cutting edges: 6 Cutting-edge height: 25.3 mm Weight: 0.256 kg Torx key: T8 Torx screw: M2.5x5.5 Internal coolant: yes Special features Compatibility: EPMT 0603 indexable inserts Compatible insert manufacturer: Hitachi Screw-in design for secure mounting Compact tool body for reduced overhang FAQ Which inserts fit this cutter? This cutter accepts EPMT 0603 indexable inserts; the tool body is compatible with inserts from Hitachi and configured for that insert family. How is coolant delivered to the cutting zone? Coolant is supplied through the cutter via internal coolant channels, directing fluid to the insert edge to improve cooling and chip evacuation. What fastening hardware is required for insert changes? Inserts are secured with a Torx screw M2.5x5.5; a T8 Torx key is used for removal and installation. What holder thread is required for mounting? The tool is designed for screw-in mounting with an M16 thread; a matching M16 screw-in holder is required for correct assembly. What is the product SKU for ordering or spare parts? The product is supplied as VT235-1TM, which should be referenced for ordering and when specifying compatible accessories. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No: 9, Selcuklu/KONYA, TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine a compact 40 mm diameter with internal coolant and secure M16 mounting to achieve consistent, efficient milling and reduced tool-change time; order the tool directly via Metav Werkzeuge or request compatibility advice from the consultants. Screw-in milling cutter 40 mm with internal coolant – Teknik Makina The screw-in milling cutter for LNMU 0303 indexable inserts is a coolant-fed, compact tool engineered for precision milling in CNC operations. 40 mm diameter for compact setups Internal coolant for efficient chip control M16 thread for secure mounting Compatible with LNMU 0303 indexable inserts Six cutting edges for economical indexing Coolant-fed design for consistent surface quality and extended tool life The built-in internal coolant channel delivers fluid directly to the cutting zone, improving chip evacuation and reducing edge temperature. This targeted cooling helps maintain cutting-edge geometry over longer cycles, resulting in steadier surface finish and fewer unplanned interventions. For production environments where process stability matters, the coolant-fed arrangement supports higher feed rates while protecting the insert life and machine uptime. Compact diameter and modular insert system to lower inventory costs A compact 40 mm diameter makes the tool suitable for tight set-ups and multi-tool turrets, while the acceptance of LNMU 0303 indexable inserts enables economical re-indexing rather than full-body replacement. The modular approach reduces tooling stock and simplifies tool management: workshop planners benefit from predictable consumable consumption and straightforward insert procurement, particularly when pairing with Tungaloy inserts commonly stocked across suppliers. Robust mounting and easily serviceable components for reliable production Secure retention is ensured by the M16 thread and a 23 mm thread engagement height, combined with Torx fastenings (key T8, screw M2.5x7) for repeatable clamping torque. The tool’s six cutting edges allow multiple indexings before an insert change is necessary, improving cost per cut. With a 63 mm overall length and a compact mass (approx. 0.272 kg), the cutter minimises overhang and vibration in many standard milling set-ups, supporting consistent dimensional outcomes in serial work. Predictable performance tailored to CNC workflows Designed as a modular, coolant-fed cutter, the unit delivers predictable machining cycles and straightforward maintenance procedures. The use of indexable inserts means wear-related downtime is reduced to rapid insert swaps, while the physical dimensions and fastening standardisation permit quick integration into existing tool lists. These characteristics support continuous production with a focus on operational efficiency and measurable process reliability. For application guidance on Teknik Makina’s VT307-1TM screw-in milling cutter, or to confirm insert compatibility and delivery options from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT307-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Internal coolant: Yes Core specifications Diameter: 40 mm Overall length: 63 mm Thread: M16 Thread height: 23 mm Cutting edges: 6 Cutting height: 40 mm Weight: 0.272 kg Torx key: T8 Torx screw: M2.5x7 Compatibility & features For LNMU 0303 indexable inserts Compatible insert manufacturer: Tungaloy Six cutting edges Coolant-fed design Torx fasteners for secure clamping FAQ Which inserts are compatible with this cutter? The cutter accepts LNMU 0303 indexable inserts; compatibility with Tungaloy inserts is indicated for standard insert geometry and clamping. Does the tool provide internal coolant delivery? Yes, the VT307-1TM is a coolant-fed screw-in milling cutter designed to channel coolant directly to the cutting zone. How is the tool mounted to the machine? Mounting is via an M16 thread with a 23 mm thread engagement and secured with Torx fasteners (key T8, screw M2.5x7) for repeatable clamping. How many indexing positions are available per insert? The design accommodates inserts with six cutting edges, allowing multiple indexings to extend effective tool life and reduce consumable cost. What are the main dimensions and weight of the cutter? Key dimensions are 40 mm diameter and 63 mm overall length; the tool weighs approximately 0.272 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust cutting stability, integrated coolant supply and a standard M16 screw-in connection combine to deliver efficient, repeatable machining operations; order the VT319-1TM directly via Metav Werkzeuge or consult our specialists for application guidance. VT319-1TM screw-in milling cutter — 40 mm, internal coolant (Teknik Makina) The VT319-1TM screw-in milling cutter is a coolant-fed cutting head for LOGU 0303 indexable inserts, engineered for stable face and slot machining in industrial milling and turning cells. 40 mm diameter for stable cutting Internal coolant for improved chip evacuation M16 screw-in connection Compatible with Kyocera LOGU 0303 inserts Five cutting edges with 45 mm cutting height Faster, more consistent metal removal for higher throughput The compact head and 40 mm diameter profile deliver a balanced combination of rigidity and access, which supports higher metal removal rates while limiting chatter. The combination of five cutting edges and a 45 mm cutting height enables longer effective cutting engagement per indexing step, reducing tool-change frequency. The M16 screw-in mounting ensures a repeatable fit and helps maintain concentricity in serial production, while the moderate mass (approx. 0.316 kg) keeps spindle load predictable without compromising stability. Coolant-fed clamping and proven insert compatibility reduce downtime An internal coolant channel supplies cutting fluid directly to the cutting zone, so heat is extracted at source and chip evacuation is improved; this results in extended insert life and fewer interruptions for insert changes. Insert clamping is secured with an M3x7 Torx screw, operated with a T8 Torx key for rapid, toolroom-friendly maintenance. The tool accepts Kyocera LOGU 0303 indexable inserts, providing access to a wide range of grades and geometries for finishing, roughing or mixed applications. Simple integration and dependable handling in production environments With an overall length of 68 mm and a standard M16 thread, the cutter is straightforward to integrate into existing toolholders and adapters, enabling quick retrofits without special adapters. The screw-in design and clear numeric specifications make tool inventory and replacement predictable across batches. The cutter's features support process standardisation, which contributes to consistent part quality and a reliable supply chain when sourced via established distributors. Contact Metav Werkzeuge for a tailored recommendation on integrating the VT319-1TM into current setups or to confirm compatibility with specific machines; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT319-1TM Manufacturer: Teknik Makina Product type: Einschraubfräser For indexable inserts: LOGU 0303 Compatible inserts manufacturer: Kyocera Facts Diameter: 40 mm Overall length: 68 mm Thread: M16 Thread height: 23 mm Cutting edges: 5 Cutting height: 45 mm Weight: 0.316 kg Torx key: T8 Torx screw: M3x7 Internal coolant: yes Special features Internal coolant supply to cutting zone M16 screw-in connection Compatible with Kyocera LOGU 0303 indexable inserts Five cutting edges for extended indexing FAQ Which insert type fits this cutter? The VT319-1TM accepts LOGU 0303 indexable inserts; compatibility with Kyocera insert variants is specified for straightforward supply choices. How is the insert secured? Insert clamping uses an M3x7 Torx screw tightened with a T8 Torx key for reliable fixation and fast replacement of inserts. Does the cutter provide coolant to the cutting edge? Yes, the internal coolant channel supplies fluid directly to the cutting zone to improve cooling and chip evacuation on the VT319-1TM. What mounting thread is required for installation? The tool uses an M16 screw-in connection with a thread height of 23 mm for secure, repeatable mounting. Is the tool suitable for high-material-removal applications? The combination of a 40 mm head, five cutting edges and a 45 mm cutting height provides strong cutting capacity and extended index life for many roughing and semi-finishing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, secure tool that combines a 40 mm diameter, an M16 screw-on connection and compatibility with LOGU 0303 indexable inserts — a practical choice for consistent chip removal and short setup times. Order the screw-in milling cutter directly via Metav Werkzeuge or consult the technical advisors for a tailored specification. Screw-in milling cutter VT319TM — 40 mm, M16 thread, for LOGU 0303 inserts (Teknik Makina) The screw-in milling cutter for LOGU 0303 indexable inserts, designed for medium-depth milling where secure mounting and straightforward insert replacement save machine time 40 mm diameter for medium-depth milling M16 screw-in connection for secure mounting Compatible with LOGU 0303 indexable inserts Five cutting edges for smooth material removal Reliable mounting and consistent machining results The tool’s M16 thread and compact form ensure a positive, vibration-resistant connection between spindle and cutting head. This reduces chatter and helps to keep tolerances tight over extended runs. With a 68 mm total length and a 23 mm thread height, the design balances reach and rigidity, making it suitable for standard toolholders where a short overhang is required. The robust connection and precise seating of the insert pocket contribute directly to predictable cycle times and repeatable surface quality, which is essential in series production and job-shop environments. Efficient productivity through indexable inserts and serviceable design Equipped to accept LOGU 0303 indexable inserts and compatible with Kyocera inserts, the head is set up for rapid index changes and economical regrinds. The cutter features five cutting edges, which extends runtime between interventions and reduces tooling cost per part when compared with single-edge solutions. Maintenance and insert changes are carried out with the supplied fastening specification — Torx T8 key and M3x7 Torx screw — allowing quick, standardised intervention by workshop personnel. The result is lower downtime and improved overall equipment effectiveness. Practical handling, straightforward specification and workshop fit At a weight of 0.316 kg and with a 45 mm cutting height, the item is light enough for easy handling while providing sufficient engagement for routine milling tasks. The compact head means the assembly is compatible with many common clamping systems; mounting is simple and repeatable, aiding setup reproducibility across shifts. Supplied as a finished cutter body ready for inserts, the design focuses on compatibility and serviceability, which makes it a pragmatic choice for both production and maintenance departments seeking to standardise tooling across machines. Order the Teknik Makina screw-in milling cutter via Metav Werkzeuge for dependable compatibility with LOGU 0303 inserts and fast, expert advice from our sales engineers at Metav Werkzeuge Technical data Article number: VT319TM Label: 40mm Einschraubfräser LOGU 0303 L68mm Manufacturer: Teknik Makina Product type: Screw-in milling cutter ECLASS: 21180806 Dimensions & core data Diameter: 40 mm Total length: 68 mm Thread height: 23 mm Cutting height: 45 mm Thread: M16 Number of cutting edges: 5 Weight: 0.316 kg Compatibility & special features For LOGU 0303 indexable inserts Compatible insert manufacturer: Kyocera Torx key: T8 Torx screw: M3x7 SKU / UID: VT319TM / VT319TM FAQ What insert type does this cutter accept? The 40 mm screw-in milling cutter accepts LOGU 0303 indexable inserts; compatibility with Kyocera inserts is specified for straightforward sourcing and replacement. What is the mounting connection for this cutter? Mounting is via an M16 screw-in thread, providing a secure, repeatable connection suited to medium-overhang setups. How many cutting edges are available and what benefit do they provide? The cutter is configured with five cutting edges, which lengthens runtime between insert changes and reduces tooling cost per component through multiple indexed edges. Which tools are required for insert replacement? Insert retention uses a Torx M3x7 screw, serviced with a T8 Torx key, enabling rapid and standardised insert changes. Is the cutter ready to use on delivery? The tool is supplied as a finished cutter body for LOGU 0303 inserts; inserts must be fitted before machining, and fastening follows the supplied Torx specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com