Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a robust Ø40 mm cutting diameter, 32 mm shank and 60 mm cutting length for steady material removal and high process reliability; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. Shank milling cutter S322TM – indexable-insert cutter with Ø40 mm and 4 flutes Shank milling cutter S322TM designed for slotting and peripheral milling with ADKT 1505 indexable inserts, offering stable clamping and fast insert changes for industrial machining Ø40 mm cutting diameter for versatile milling 32 mm shank for secure toolholding Four-flute geometry for improved chip control Compatible with ADKT 1505 indexable inserts Higher throughput through proven geometry and sturdy shank The combination of a 32 mm shank and a Ø40 mm cutting diameter provides a stable connection to the spindle, reducing vibration and supporting consistent cutting forces. With a four-flute layout, the cutter balances material removal rate and surface quality; this geometry enables efficient chip evacuation while maintaining feed rates appropriate for indexable-insert milling. The measured overall length of 200 mm gives sufficient reach for many set-ups without compromising rigidity. These attributes translate into predictable cycle times and lower scrap rates in production environments. Fast insert handling that keeps machines running Designed for ADKT 1505 indexable inserts, the tool uses a proven clamp and fastening solution to ensure repeatable positioning. The supplied fastening elements—M4x10 Torx screw and T15 key—allow secure and rapid insert replacement, reducing tool-change downtime and simplifying workshop logistics. Compatibility with ISCAR insert types expands sourcing options and helps to lower tooling inventory costs. For operations that schedule frequent insert changes, this cutter’s design supports quick interventions and faster returns to full productivity. Robust build for repeatable precision and chip management A cutting length of 60 mm gives an effective engagement zone for deeper cuts or stepped operations, while the four cutting edges deliver regular engagement and even wear distribution. The cutter’s weight of 1.272 kg reflects its solid construction, contributing to axial stability during heavy passes. By combining these mechanical characteristics, the tool offers predictable tool life and consistent surface finish, which is particularly beneficial for batch production and series manufacturing where process stability is paramount. Practical fitment and workshop advantages The tool is supplied for industrial use and mates with common toolholders thanks to its standard 32 mm shank. Being compatible with ADKT 1505 indexable inserts and widely used ISCAR formats reduces the need for specialised spare parts. This standardisation keeps the procurement process straightforward and aligns with lean tooling strategies. In addition, the clear mechanical interface and standard Torx fastening mean training requirements for operators are minimal, easing integration into existing production lines. For tailored tooling advice and reliable supply from Metav Werkzeuge—based in Emmerich and serving European industry—get in touch with the Metav team for recommendations on holder selection and optimal cutting parameters Technical data Article number: S322TM Manufacturer: Teknik Makina Product: Shank milling cutter for ADKT 1505 indexable inserts Diameter: 40 mm Shank diameter: 32 mm Cutting length: 60 mm Overall length: 200 mm Number of flutes: 4 Weight: 1.272 kg Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 SKU: S322TM FAQ What types of operations is this cutter suitable for? The S322TM shank milling cutter is intended for peripheral and slot milling operations using ADKT 1505 indexable inserts, providing stable removal rates for general machining tasks. Which insert format does the tool accept and is it widely available? This tool accepts ADKT 1505 indexable inserts; these inserts are common in industry and compatible sets are available from ISCAR and other suppliers suited to varied materials. How is the insert secured and which tool is required for changes? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is used for insertion and removal, enabling quick and repeatable insert changes. Is the shank size suitable for standard holders? Yes, the 32 mm shank is compatible with standard toolholders designed for that shank diameter, ensuring rigid clamping and straightforward integration into existing tool systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable-insert system and secure 32 mm shank clamping for repeatable milling operations; combine the precise Ø40 mm cutting diameter and 45 mm cutting length for consistent chip control. Order this cutter through Metav Werkzeuge or consult Metav advisers for application-specific recommendations. Shaft milling cutter S650TM — indexable-insert cutter Ø40 mm, 4 cutting edges by Teknik Makina The Shaft milling cutter S650TM is an indexable-insert milling tool designed for XOMX 0602–1204 inserts, suitable for manufacturing environments requiring reliable face and profile milling with a 90° cutting geometry Indexable-insert system for XOMX 0602–1204 Compact Ø40 mm body with 4 cutting edges 32 mm shank for secure clamping in tooling systems SECO-compatible inserts; M3.5x8.5 Torx fixing Consistent production performance with optimised cutting geometry The cutter delivers a stable milling solution where reproducible results are essential. The 90° cutting angle and 4 cutting edges are engineered to provide reliable load distribution across the insert corners, reducing vibration in repetitive operations. With a Ø40 mm diameter and 45 mm cutting length, the tool is configured to balance material removal rate and tool life. This configuration supports efficient machining cycles in batch production and helps to maintain machining tolerances through uniform chip evacuation and predictable forces. Secure clamping and rapid insert changes for minimal downtime A robust 32 mm shank offers a rigid interface to typical toolholders, improving concentricity and reducing runout in high-precision setups. The insert is fastened with an M3.5x8.5 Torx screw and requires a T10 key for straightforward replacement, enabling quick index and change procedures on the shop floor. Compatibility with SECO-type inserts and XOMX 0602–1204 sizes ensures broad availability of cutting grades and geometries, allowing the tool to be adapted for different workpiece materials without complex retooling. Practical suitability for common milling tasks and integration Designed as an indexable-insert shaft cutter, the tool is appropriate for tasks that demand a perpendicular cutting face and repeatable edge engagement. The compact overall length of 150 mm and an overall weight of 1.047 kg make it manageable in a variety of machining centres while retaining the stiffness required for reliable finishing passes. The indexable concept reduces the need for multiple solid-end mills, offering an economical route to both semi-finishing and general-purpose face milling where the insert family is approved. Why this tool is a dependable choice from Metav Sourcing the cutter through Metav Werkzeuge pairs the product with a proven supply and quality filter based in Emmerich, supporting consistent availability and traceability across the European market. Metav’s decades of precision trading and a wide product range mean the tool is supported by accessory availability and application know-how, helping machine shops to consolidate suppliers and reduce procurement risk while maintaining production readiness. For technical advice or to secure supply of the S650TM shaft milling cutter, contact Metav Werkzeuge for application guidance and parts availability at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: S650TM Manufacturer: Teknik Makina Brand: Teknik Makina Facts Diameter: 40 mm Number of cutting edges: 4 Overall length: 150 mm Shank diameter: 32 mm Cutting length: 45 mm Weight: 1.047 kg Cutting angle: 90° Special features For XOMX 0602–1204 indexable inserts Compatible with SECO inserts Torx screw M3.5x8.5 Torx key T10 Indexable-insert system for repeatable machining FAQ What inserts fit this cutter? The cutter accepts XOMX 0602–1204 indexable inserts; it is compatible with SECO-style inserts and sizes within that family for straightforward replacement. Is the S650TM suitable for heavy roughing? The S650TM is designed as an indexable-insert shaft cutter with a 90° cutting angle; selecting the appropriate insert grade and cutter engagement determines suitability for heavier material removal. Which toolholder clamping is recommended? A rigid holder that accepts a 32 mm shank is recommended to achieve optimal concentricity and tool life with the S650TM. How are inserts secured and changed? Inserts are fastened with an M3.5x8.5 Torx screw using a T10 key, allowing rapid replacement and indexing on the shop floor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine internal coolant, a 40 mm cutting diameter and a sturdy 32 mm shank to achieve reliable, repeatable milling cycles with reduced tool-change downtime; order or request application advice directly via Metav Werkzeuge for rapid supply from Emmerich. Shank milling cutter S289TM — 40 mm diameter, internal coolant (Teknik Makina) A Shank milling cutter designed for high-efficiency milling with LNMX 0603 indexable inserts, delivering stable chip control and simple insert replacement. Internal coolant for consistent chip evacuation Compatible with LNMX 0603 Korloy inserts 40 mm cutting diameter with six inserts 32 mm shank; 150 mm overall length Faster cycle times through stable chip control The combination of an integrated internal coolant channel and a six‑insert arrangement reduces heat build-up and promotes reliable chip evacuation. This arrangement supports higher cutting parameters and less frequent rework, so the machining process becomes more predictable. The robust body and coolant feed help to maintain cutting-edge geometry under load, which in practice lowers scrap rates and shortens overall machining times. Predictable part quality with indexable inserts Compatibility with LNMX 0603 indexable inserts from Korloy enables rapid insert changes and consistent surface finish without complex regrinding procedures. Indexable technology separates the cutting edge from the cutter body, so wear is addressed by swapping inserts rather than replacing the whole tool. This design is particularly advantageous for batch production, where process repeatability and minimised setup time are priorities. Simple integration and secure clamping for workshop use The cutter’s 32 mm shank and 150 mm overall length make it suitable for standard toolholders used in general milling applications. The specified M3x7 Torx screws and a T8 Torx key simplify insert mounting and maintenance. The cutter’s geometry, combined with the six‑insert configuration, balances material removal and surface integrity, enabling operators and process engineers to harmonise throughput and quality with minimal additional tooling. Contact Metav Werkzeuge to arrange a technical consultation or to secure the S289TM shank milling cutter with internal coolant from our Emmerich warehouse Technical data Article number: S289TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: LNMX 0603 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M3x7 Dimensions & weights Cutting diameter: 40 mm Overall length: 150 mm Shank diameter: 32 mm Cutting length (shank): 40 mm Number of inserts: 6 Weight: 0.97 kg Features & applications Internal coolant For LNMX 0603 indexable inserts Six cutting edges for high material removal rates Specified fastening hardware included (T8, M3x7) FAQ Which inserts fit this cutter? The cutter accepts LNMX 0603 indexable inserts; Korloy inserts are specified as compatible for the S289TM shank milling cutter. Is the cutter equipped for through‑coolant delivery? Yes — the tool features an internal coolant channel to improve chip evacuation and thermal stability during milling. What are the main dimensions to check for holder compatibility? Key dimensions are a 40 mm cutting diameter, 32 mm shank diameter and 150 mm overall length; these figures determine toolholder selection and projection. How many inserts are required and how are they secured? The cutter uses six inserts, each fastened with M3x7 Torx screws; a T8 Torx key is specified for assembly and maintenance. Is this cutter suitable for production batches where tool-change speed matters? Yes — indexable inserts and straightforward fastening make the S289TM appropriate for production workflows that demand rapid insert exchange and consistent part quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑performance milling solution that combines a 40 mm cutting diameter, internal coolant and reliable compatibility with AP‑1604 indexable inserts for steady production results. Order this tooling component via Metav Werkzeuge or consult our team for integration advice. S264‑1TM indexable shank milling cutter — 40 mm diameter, internal coolant, for AP‑1604 inserts (Teknik Makina) The S264‑1TM indexable shank milling cutter is designed for precision milling operations where consistent chip control and secure clamping are required; ideal for workshop and production environments using AP‑1604 insert systems. 40 mm cutting diameter Internal coolant for improved chip control Compatible with AP‑1604 / Korloy inserts 25 mm shank for secure clamping 45 mm effective cutting length Maximise machining uptime with active coolant support The integrated internal coolant channel channels cutting fluid directly to the cutting edge, improving chip evacuation and reducing heat at the cutting zone. This results in more stable cutting conditions and longer life for the insert edges, which translates into fewer tool changes and less unproductive machine time. For industrial settings where cycle time and repeatability matter, the built‑in coolant feed is a practical productivity enabler that supports continuous operation and consistent part quality. Stable mounting and repeatable accuracy for high consistency A 25 mm shank diameter and balanced 120 mm overall length ensure secure clamping and minimal run‑out under load; the tool’s mass of 0.547 kg contributes to stable cutting dynamics. Inserts are secured with M4x10 Torx screws operated with a T15 key, enabling quick, repeatable index changes and straightforward maintenance. These mechanical details support process reliability and make fixture and toolholder selection predictable for production planners. Broad compatibility to simplify tooling logistics The cutter accepts the AP‑1604 indexable insert format and is compatible with inserts from Korloy, allowing parts consolidation and simpler supply chains. Using a common insert family reduces inventory complexity and makes it easier to source replacements and grades suitable for a variety of materials. The modularity of the insert system also enables fast adaptation to different job requirements without replacing the entire tool body. Practical geometry for mixed workshop and production use With a 45 mm effective cutting length and a 40 mm diameter, the tool suits a range of milling tasks from light slotting to face milling operations where a larger cutter diameter is advantageous. The configuration of four cutting edges balances material removal rate and surface stability while keeping the number of indexed cuts manageable. This geometry offers a compromise between robustness and accessibility for standard machining centres and robust workshop machines. For tailored tooling recommendations on Teknik Makina’s S264‑1TM — particularly when optimising coolant delivery or insert grades — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and supply options Technical data SKU: S264-1TM Product type: Indexable shank milling cutter Manufacturer: Teknik Makina Label: 40mm shank cutter AP-- 1604 L120mm with internal coolant Weight: 0.547 kg Facts Cutting diameter: 40 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length (edge): 45 mm Number of cutting edges/inserts: 4 Special features Internal coolant channel Compatible with AP‑1604 indexable inserts Suitable inserts manufacturer: Korloy Fastening: Torx screw M4x10 Torx key: T15 FAQ Which insert type fits this cutter? The S264‑1TM accepts AP‑1604 indexable inserts; Korloy AP‑1604 variants are compatible with this cutter body. Does the tool provide coolant to the cutting edge? Yes, the cutter features an internal coolant channel that delivers fluid directly to the insert outlets to aid chip removal and temperature control. What shank size and overall length does the cutter have? This indexable shank cutter has a 25 mm shank and a 120 mm overall length, with a 45 mm effective cutting length. How are the inserts secured? Inserts are fastened using M4x10 Torx screws tightened with a T15 key, enabling secure and repeatable insert changes on the S264‑1TM. Is the cutter suitable for production use? The design of the cutter — four inserts, internal coolant and a robust shank diameter — supports continuous production use where consistent chip control and repeatability are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of precise indexable-insert compatibility, a Ø40 mm body and a secure Torx fastening for reliable milling cycles; streamline tooling changeover and reduce machine downtime by choosing a cutter engineered for repeatable performance. Order directly via Metav Werkzeuge or ask our consultants for application support. Shank milling cutter S528TM — indexable‑insert cutter for R390‑1704, Ø40 mm (Teknik Makina) A shank milling cutter S528TM designed for face and shoulder milling with R390‑1704 indexable inserts, suited to general machining and production environments Compatible with R390‑1704 inserts (Sandvik) Ø 40 mm body with 32 mm shank 4 cutting edges for stable machining Torx M3.5x8.5 screws, T15 key required Faster changeovers and consistent results for serial milling The cutter body is built for quick insert replacement and secure clamping, delivering repeatable cycles in series production. With its compatibility with R390‑1704 indexable inserts, changeover time is reduced and tool life is easier to manage; the fixed cutting angle of 90° supports clean shoulder surfaces and predictable load distribution. This stability translates into fewer process interruptions and a measurable uplift in throughput for medium‑volume runs. Design that balances rigidity and accessibility A Ø40 mm cutting head paired with a 32 mm shank provides a stiff toolholder interface that resists vibration during heavy cuts. The arrangement of four cutting edges ensures even material engagement and balanced cutting forces, which aids surface finish without complex adjustments. The Torx fixing system (M3.5x8.5 screws, T15 key) secures each insert firmly, lowering the risk of movement under load and simplifying maintenance routines. Clear compatibility and straightforward fitting Engineered for use with R390‑1704 inserts from Sandvik, the cutter accepts standard indexable plates that are widely stocked, so spare parts and replacements are easy to source. The straightforward geometry and standardised fixing allow this tool to be integrated into existing setups without special adapters. For shops seeking to harmonise tooling across multiple machines, this body offers predictable mounting and serviceability. Practical benefits for workshop productivity Weight and length are optimised for handling and machine balance: an overall length of 150 mm and a gross weight close to 0.936 kg give a compact footprint while maintaining sufficient mass for dampening. The specified 55 mm cutting length permits deeper step‑downs where appropriate, reducing the number of passes needed for certain operations. Such attributes contribute to lower cycle times and reduced operator handling during tool changes. For application recommendations and procurement, contact Metav Werkzeuge for advice on integrating the Teknik Makina S528TM into production processes — Metav’s technical team in Emmerich can advise on inserts, clamping and machining parameters Technical Data Article number: S528TM Manufacturer: Teknik Makina Product: Shank milling cutter for R390‑1704 indexable inserts Brand: Teknik Makina Facts Diameter: 40 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 150 mm Number of cutting edges: 4 Weight: 0.936 kg Cutting angle: 90° Torx screw: M3.5x8.5 Torx key size: T15 Special features Compatible with R390‑1704 inserts Recommended insert manufacturer: Sandvik Indexable‑insert system for fast replacement Robust shank for stability in milling Suited to face and shoulder milling applications FAQ Which inserts fit this cutter? The cutter accepts R390‑1704 indexable inserts; the body is specified for that plate format and is compatible with standard Sandvik R390‑1704 types. Is the shank suitable for rigid clamping systems? Yes — the 32 mm shank provides a stiff interface suitable for rigid collet or hydraulic chuck clamping in conventional milling stations. How many cutting edges are available on the tool? The tool body accommodates four cutting edges, enabling balanced cutting forces and stable machining for shoulder and facing operations. What fastening hardware is used for the inserts? Inserts are secured with Torx screws M3.5x8.5; the required Torx key size for assembly and changeover is T15. Can this cutter be used for heavy roughing passes? The cutter’s geometry and robust shank are designed to tolerate moderate roughing; for extreme heavy cuts, consult machining parameter charts and Metav Werkzeuge’s application advice for optimal settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of internal coolant and a 32 mm shank for stable, high-feed machining; the design supports fast chip evacuation and predictable tool life. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants for tailored advice. Shank milling cutter for AP-- 1604 indexable inserts (40 mm, internal coolant) — Teknik Makina The Shank milling cutter for AP-- 1604 indexable inserts is a 40 mm diameter, 150 mm overall length cutter designed for robust face and slot milling in industrial production, featuring internal coolant for consistent cutting performance. 40 mm diameter for versatile milling Internal coolant for improved tool life Compatible with Korloy AP-- 1604 inserts 32 mm shank for rigid clamping Improved cutting performance through internal coolant The integrated internal coolant channel directs cutting fluid precisely to the cutting zone, reducing temperatures and flushing chips away from the insert edge. This targeted cooling not only prolongs insert life but also helps maintain consistent cutting forces, which reduces vibration and improves surface finish. For operations where cycle time and repeatability matter, the through-coolant design delivers a measurable improvement in process stability and lowers the frequency of unplanned tool changes. Rigidity and repeatable clamping for accurate results A 32 mm shank provides a solid clamping interface that minimises run-out and deflection during heavy cuts. Combined with four cutting edges and a 55 mm cutting length, the tool offers a balanced mix of reach and stability. The use of indexable inserts (AP-- 1604) means worn edges can be replaced quickly without regrinding, enabling predictable tool costs and fast recovery times on the shop floor. This configuration is intended to support high material removal rates while maintaining dimensional accuracy. Simple maintenance and proven compatibility Replacement of inserts is straightforward thanks to standard fastening: M4x10 Torx screws with a T15 key make service procedures fast and reproducible. The cutter is specified for AP-- 1604 indexable inserts and is compatible with inserts from Korloy, ensuring availability and choice of grades. Clear, standardised fixing reduces setup time and makes it easier to keep a small, efficient stock of spare parts for continuous production. Production gains across milling applications The cutter’s geometry and internal coolant capability suit a wide range of milling tasks where reliability and throughput are priorities. The combination of solid shank design, accessible insert system and targeted cooling supports longer uninterrupted runs and reduced overall tooling cost per component. For manufacturers aiming to increase output without compromising on surface quality, this tool offers an effective balance between performance and serviceability. Contact Metav Werkzeuge for a tailored quotation or technical consultation on the Teknik Cutting Tools shank milling cutter S274-1TM — available from our Emmerich location for prompt supply and specialist advice. Technical data SKU: S274-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Label: 40mm shank milling cutter AP-- 1604 L150mm with internal coolant Core specifications Diameter: 40 mm Overall length: 150 mm Shank diameter: 32 mm Cutting length: 55 mm Number of cutting edges: 4 Weight: 0.96 kg Materials & features Internal coolant: yes Compatible inserts: AP-- 1604 indexable inserts Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ What insert type does the cutter use? The shank milling cutter accepts AP-- 1604 indexable inserts, compatible with grades supplied by Korloy for flexible application choices. Is the tool equipped for through-coolant use? Yes, the tool features internal coolant channels to supply cutting fluid directly to the cutting edge, improving cooling and chip evacuation. Which shank size is required for the holder? The cutter has a 32 mm shank, designed for standard rigid holders that support stable clamping and low run-out. How are the inserts secured and replaced? Inserts are fixed with M4x10 Torx screws; a T15 Torx key is used for fast, repeatable insert changes. What production benefits can be expected from this cutter? Expect more consistent surface finish and reduced downtime due to the combination of targeted cooling, a rigid 32 mm shank and an indexable insert system that simplifies maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com

Take advantage of stable clamping, narrow 3 mm grooving capability and a rigid 32 mm shank for consistent cycle times and predictable surface quality; order or request technical advice via Metav Werkzeuge for quick delivery and application support. Grooving clamp holder — robust parting and grooving tool holder with 3 mm cutting width (Teknik Makina) Grooving clamp holder for precision parting and grooving in turning applications, compatible with Korloy KGEVR-KGMN 300 inserts and designed for stable performance in workshop and production environments Compatible with Korloy KGEVR-KGMN 300 Shank Ø32 mm for rigid mounting Cutting width 3 mm for narrow grooves Total length 250 mm for extended reach Enhanced rigidity for predictable groove quality A focus on mechanical stability reduces chatter and improves repeatability. The holder's shank Ø32 mm provides a firm connection to the tool post, which translates into less vibration and a more consistent cutting action when machining narrow grooves. With a cutting height of 55 mm, the design ensures the insert line-up is maintained under load, delivering repeatable part geometry and lower scrap rates. This rigidity is especially relevant where short cycle times and reliable surface finish are required. Precise insert matching and straightforward integration Designed for use with the KGEVR-KGMN 300 insert family from Korloy, the clamp format accepts the standard KGMN-style plates and the holder’s interface aligns with established turning tool standards such as S32S 3C shank designation. This compatibility shortens set-up times and simplifies inventory management by allowing established inserts to be fitted without adapter changes. The result is a straightforward route to improved throughput while retaining familiar clamping practice on existing lathes. Practical dimensions and durable workshop performance With an overall total length of 250 mm and a compact cutting width of 3 mm, the holder is arranged for deep or confined grooving tasks without compromising access or control. The construction supports a serviceable life in regular production: the mass of 1.627 kg gives the assembly momentum during cutting while the geometry keeps forces in the clamping zone predictable. For operations that demand a reliable, repeatable grooving solution, this holder balances accessibility, robustness and compatibility to support efficient machining cycles. Discuss Teknik Makina grooving clamp holders with Metav Werkzeuge to match the right configuration for the application and secure timely delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K665TM Manufacturer: Teknik Makina Product: Grooving clamp holder Brand SKU: K665TM Facts Shank diameter: 32 mm Cutting height: 55 mm Cutting width: 3 mm Total length: 250 mm Weight: 1.627 kg Diameter: 40 eClass: 21181005 UID: K665TM Special features Compatible with Korloy KGEVR-KGMN 300 inserts Shank designation: S32S 3C Clamping type: KGMN-compatible Suitable for narrow grooving and parting applications FAQ What insert type fits this holder? The holder accepts KGEVR-KGMN 300 style inserts from Korloy, providing a standardised KGMN clamping interface for secure seating and repeatable cutting performance. Which shank size is required for mounting? Mounting is designed for a 32 mm shank interface (S32S 3C), ensuring a rigid connection for turning and grooving operations. Is the holder suitable for deep grooves? Yes — with a total length of 250 mm and a compact cutting width of 3 mm, the design is geared towards access in deeper grooves while maintaining control over cutting forces. What are the key benefits for production use? The holder offers improved stability through a Ø32 mm shank and predictable clamping for KGMN inserts, which helps reduce cycle variability and rework in serial machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a sturdy parting solution that combines stable clamping, precise cutting geometry and standardised insert compatibility to reduce setup time and improve cycle consistency; order directly via Metav Werkzeuge or ask the consultants for tailored integration advice. Stechklemmhalter K668TM — Parting tool holder with 32 mm shank and 55 mm cutting height (Teknik Makina) The Stechklemmhalter is a purpose-built parting tool holder for indexable grooving inserts, engineered for lathe-based parting and grooving operations where repeatable cut control and easy insert replacement are required. 32 mm shank diameter for stable clamping 55 mm cutting height for deep grooving Compatible with Korloy KGEVR-KGMN 400 inserts 250 mm overall length for extended reach Stable clamping for accurate, repeatable parting A robust toolholder backbone is essential when consistent parting quality is required across batches. The parting tool holder features a 32 mm shank, providing a solid contact surface in the tool post and reducing micro-movement during cut engagement. With a 55 mm cutting height and a 4 mm cutting width, the holder is dimensioned to support standard grooving depths while maintaining rigidity and thermal stability. The result is improved repeatability between operations, fewer scrap parts and a reduction in rework cycles — a direct contribution to process efficiency. Fast changeover through standard insert compatibility Minimising machine downtime is achieved by using established insert formats and secure clamping. This holder accepts Korloy KGEVR-KGMN 400 indexable inserts and matches common bore and clamp standards such as S32S 4C and the KGMN bar designation. Compatibility with these widely used components simplifies stock management and shortens changeover procedures. The standardized interface enables quick, reliable insert seating and torque-controlled clamping, which is beneficial for workshops aiming to increase machine uptime and throughput. Designed to withstand workshop demands Long tool reach and a balanced mass distribution matter when access and vibration control are priorities. With a 250 mm overall length and a mass of 1.623 kg, the holder delivers the reach necessary for deeper parting operations while preserving stability under feed forces. The geometry has been developed to reduce chatter and to support consistent chip flow, which extends insert life and lowers tooling costs per component. The construction is tailored to provide dependable service in job shops and production environments where robustness and low maintenance are prized. Where this holder excels in production The holder is particularly suited to turning centres and manual lathes performing precision parting or grooving on standard workpiece diameters; the 40 mm diameter reference and the bar-compatible shank make it applicable for setups requiring moderate reach and a secure clamping interface. Applications include component cut-off, internal and external grooving where a controlled slot width and depth are critical. The combination of a standard insert family and a rigid mounting profile supports repeatable results and straightforward process validation in small to medium production runs. For reliable parting performance from Teknik Makina, contact Metav Werkzeuge for specification checks, order placement and implementation support — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss how the K668TM can be integrated into current turning processes. Technical data Article number: K668TM Name: Stechklemmhalter Manufacturer: Teknik Makina Compatible insert manufacturer: Korloy Compatible inserts: KGEVR-KGMN 400 Facts Shank diameter: 32 mm Cutting height: 55 mm Cutting width: 4 mm Overall length: 250 mm Reference diameter: 40 Weight: 1.623 kg eClass: 21181005 Special features Bore/bar designation: S32S 4C Holder bar designation: KGMN Suitable for indexable grooving/parting inserts Designed for lathe parting and grooving applications FAQ What insert type fits the holder? The holder is compatible with Korloy KGEVR-KGMN 400 indexable inserts; the clamping geometry is matched to that insert family for secure seating and repeatable positioning. Which shank diameter is required for mounting? The toolholder requires a 32 mm shank seat in the tool post and is designed to deliver stable clamping for parting operations. What cutting height and width does the holder support? The design provides a 55 mm cutting height and supports a 4 mm cutting width, suitable for standard grooving and parting tasks. Is the holder suitable for long-reach operations? With a 250 mm overall length, the holder offers extended reach suitable for many lathe set-ups where deeper access is necessary while maintaining rigidity. Which machine applications is the holder intended for? The toolholder is intended for lathe-based parting and grooving operations in job shops and production environments where indexable inserts are preferred for fast changeover and cost control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 40 mm cutting diameter, a 25 mm shank and a two‑edge geometry for efficient, accurate T‑slot machining; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter TKC298TM — 40 mm diameter, 2 cutting edges (Teknik Makina) The T-slot cutter TKC298TM is a precision milling tool designed for producing and finishing T‑slots in fixtures and machine tables, offering stable clamping and compatibility with Korloy indexable inserts. 40 mm diameter for standard T‑slots 25 mm shank for secure clamping Two cutting edges for smooth surfaces Compatible with Korloy indexable inserts Precise geometry for clean T‑slot profiles and high material removal rates The cutter’s 40 mm diameter combined with a compact head profile delivers consistent T‑slot dimensions while reducing the number of passes required. The tool’s two cutting edges are optimised to balance cutting force and surface finish, which helps to limit chatter in horizontal and vertical milling operations. For those less familiar with tool geometry: fewer, well‑sharpened edges often mean easier chip evacuation and a better surface on the flanks of the slot. This results in a more predictable machining process and reduced rework. Robust shank and length for vibration resistance and reliable clamping A 25 mm shank provides a substantial contact area for collet or chuck mounting, improving rigidity during plunge and peripheral milling. The 170 mm overall length offers reach for deeper setups without compromising stability when properly clamped. Greater rigidity directly supports dimensional repeatability and prolongs insert life, so production runs remain consistent. The combination of shank diameter and tool length helps to keep run‑out low, which is crucial when producing tight‑tolerance slots. Serviceable insert system and maintenance simplicity The cutter is prepared for indexable inserts from Korloy, enabling quick insert changes and cost‑effective edge renewal. The cutter head accepts standard screws tightened with a 6 mm Allen key, so maintenance and insert replacement are straightforward on the shop floor. Using indexable inserts reduces downtime compared with resharpening solid heads and allows selection of grades tailored to the workpiece material and cutting conditions, giving production planners flexibility without requiring new tool bodies. Designed for workshop efficiency and predictable results The tool’s compact head and two‑edge configuration aim to reduce cycle times while maintaining a quality surface on the slot flanks, supporting lean production goals. By prioritising mechanical stability and a proven insert platform, the cutter helps mills and toolrooms streamline tooling stock and simplify procurement decisions. Where compliance and traceability matter, the clear designation and SKU support inventory control and reordering. Contact Metav Werkzeuge for tailored technical guidance on the Teknik Cutting Tools T‑slot cutter TKC298TM, request recommended insert grades for specific applications or order through our team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC298TM Label: 40mm T-Nut Fräser L170mm ECLASS: 21180605 Manufacturer: Teknik Makina Numbers / core technical data Diameter: 40 mm Overall length: 170 mm Shank diameter: 25 mm Number of cutting edges: 2 Cutting edge height: 2 mm Special features / versions Compatible with Korloy indexable inserts Hex key: 6 mm Allen Product type: T‑slot cutter UID: TKC298TM FAQ What insert system does the cutter accept? The cutter accepts Korloy indexable inserts; TKC298TM is supplied to work with standard Korloy insert geometries for T‑slot operations. What clamping shank does the tool use? The tool features a 25 mm shank designed for secure clamping in collets or chucks, improving rigidity for repeatable slot machining. How long is the tool and what reach does it provide? The overall length is 170 mm, offering sufficient reach for many fixture and machine‑table T‑slot applications while maintaining good stability when properly clamped. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise, durable tooling solution that combines a Ø40 mm cutting diameter with 4 cutting edges and a rigid 20 mm shank for steady T-slot production; order the cutter via Metav Werkzeuge or request tailored advice from our consultants. T-slot cutter TKC200TM — compatible with Ingersoll RHKW 1003, Ø40 mm, 4 flutes (Teknik Makina) T-slot cutter TKC200TM designed for machining T-slots and T-nuts with indexable inserts, suitable for industrial milling and CNC setups T-slot cutter TKC200TM by Teknik Makina Compatible with Ingersoll RHKW 1003 inserts Ø40 mm diameter with 4 cutting edges 20 mm shank and secure Torx M4x10 fixing Consistent T-slot geometry with indexable inserts The TKC200TM is built to deliver repeatable T-slot profiles by using indexable inserts (RHKW 1003), which allow fast edge changes and consistent geometry without regrinding. The combination of a Ø40 mm cutter body and 4 cutting edges ensures a balanced cut, reducing chatter and producing clean slot walls. Indexable inserts reduce downtime because worn edges are simply rotated or replaced, making this tooling choice efficient for batch production and repeated set-ups. Stable clamping for reduced vibration and improved tool life A 20 mm shank provides the rigidity required for stable milling, particularly when working on medium-duty steel components. The cutter is secured using a Torx M4x10 screw and a M3.5 locking screw, tightened with a T15 Torx key, which ensures a reliable clamp of the insert seat and minimises the risk of movement under load. The result is improved surface quality and extended insert life, achieved through a mechanically robust connection between cutter, insert and toolholder. Smooth integration into CNC tool systems and production workflows Designed for straightforward integration with common milling interfaces, this cutter is compatible with Ingersoll-manufactured inserts, simplifying procurement and tool management in mixed-tool shops. The modular nature of using indexable inserts means tooling inventories can be reduced while maintaining flexibility. Technical teams benefit from predictable set-up times and easy reconditioning of tooling components, supporting continuous production with minimal interruption. Contact Metav Werkzeuge for specification matching and to arrange the TKC200TM with the correct Ingersoll RHKW 1003 inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TKC200TM Manufacturer: Teknik Makina Brand: Teknik Makina Diameter: 40 mm Cutting edges: 4 Overall length: 100 mm Shank diameter: 20 mm Weight: 0.285 kg Insert type: RHKW 1003 Compatible insert maker: Ingersoll Locking screw: M3.5 Torx screw: M4x10 Torx key: T15 Application: T-slot / T-nut milling FAQ What inserts are recommended for this cutter? The cutter is specified for Ingersoll RHKW 1003 indexable inserts; these inserts are compatible with the cutter geometry and deliver the expected performance. Can the cutter be used in CNC milling machines? Yes, the TKC200TM is suitable for CNC milling when mounted in the correct toolholder and run at appropriate speeds for the selected insert grade and workpiece material. How is the insert secured in the cutter? An M4x10 Torx screw secures the insert seat while an M3.5 locking screw provides additional retention; a T15 Torx key is used for tightening. What benefits do indexable inserts provide over solid cutters? Indexable inserts allow rapid edge changes, predictable geometry, and lower downtime compared with solid cutters; replacement inserts restore cutting performance without regrinding. Is the shank size compatible with standard collets? The cutter features a 20 mm shank, which is compatible with standard collet and chuck systems designed for that shank diameter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise T‑slot machining thanks to a 40 mm diameter cutter with a rigid 25 mm shank and simple insert replacement; order directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. T-slot cutter – 40 mm diameter, 120 mm overall length (Teknik Makina) The T-slot cutter is designed for reliable machining of T‑slots and grooves in industrial milling applications, engineered for insert-based cutting and compatible with Korloy inserts. 40 mm diameter for deep T‑slots 120 mm overall length for extended reach 25 mm shank for rigid clamping Compatible with Korloy inserts Consistent accuracy for repeatable slotting The milling tool delivers repeatable slot geometry through its 40 mm diameter and two cutting edges, which together reduce runout and vibration during cut‑in and slot finishing. The cutting edge height 2 mm supports precise seating of the slot head while limiting radial overcut, so machining tolerances remain stable across batches. This combination of geometry and edge height helps maintain slot profile integrity when multiple identical features are required. Quick insert changes reduce machine downtime Designed for insert‑based operation, the cutter accepts Korloy inserts, enabling fast replacement without regrinding. The clamping mechanism is served with a 6 Allen hex key for secure, repeatable tightening, while the 25 mm shank ensures the holder and spindle retain rigidity during high feed passes. Short tool change cycles translate directly into higher machine utilisation and lower handling time between operations. Robust reach and clean chip evacuation for efficient milling With a 120 mm overall length the tool reaches deeper pockets and accommodates typical fixturing arrangements without sacrificing stability. The two cutting edges balance material removal rate and chip control: fewer flutes increase chip space for effective evacuation, which supports continuous cutting in slot profiles. This geometry is beneficial where continuous, reliable slot production is required and contributes to a predictable cycle time per part. Practical guidance and typical uses for the TKC297TM The TKC297TM is suitable where T‑slots or slot heads must be produced using insert tooling; the tool type is commonly used in fixtures, machine beds and component assemblies requiring transverse grooves. Thanks to its insert compatibility and robust shank, the cutter is well suited to workshop and production environments where tool changes are frequent and setup consistency is essential. The SKU TKC297TM identifies this specific configuration for procurement and inventory control. Contact Metav Werkzeuge for tailored tooling advice and to secure the Teknik Makina TKC297TM T‑slot cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TKC297TM Label: 40 mm T‑slot cutter L120 mm Manufacturer: Teknik Makina Dimensions & core data Diameter: 40 mm Overall length: 120 mm Shank diameter: 25 mm Cutting edges: 2 Cutting edge height: 2 mm ECLASS: 21180605 Features & compatibility Compatible inserts: Korloy Hex key: 6 Allen Product type: T‑slot cutter UID: TKC297TM FAQ What insert types does the cutter accept? The cutter accepts Korloy inserts as listed; the TKC297TM is configured for standard Korloy indexable heads to simplify procurement and replacement. How is the cutter clamped and serviced? Clamping of the insert uses a 6 Allen hex key for secure tightening; the TKC297TM supports fast insert changes without full tool removal from the holder. What length and shank ensure rigidity for deep slots? The 120 mm overall length combined with a 25 mm shank provides the reach required for deeper slots while maintaining sufficient rigidity for stable machining. Which operations are best suited to this tool? The tool is intended for industrial T‑slot milling and groove production where insert‑based cutters are preferred for repeatable, high‑volume work. How is the product identified for ordering? Order using the SKU TKC297TM; the designation links the configuration, dimensions and Korloy compatibility for clear procurement. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 40 mm cutter diameter with indexable CCMT 09T3 inserts and a sturdy 25 mm shank, this tool delivers efficient, repeatable T-slot machining; order the T-slot cutter directly via Metav Werkzeuge or consult the team for application advice. T-slot cutter — Teknik Makina, 40 mm diameter, CCMT 09T3 compatible T-slot cutter for precise T-slot and head-slot machining on milling centres and machining centres Compatible with CCMT 09T3 indexable inserts 40 mm cutter diameter for stable slotting 25 mm shank and 110 mm overall length Four cutting edges for balanced cutting forces Faster slot production with indexable inserts The cutter is designed around indexable inserts to reduce downtime and tooling costs. Using CCMT 09T3 inserts means only the insert needs replacement when worn, while the cutter body remains in service; this yields lower consumable expenditure and faster turnaround compared with solid cutters. The four-flute layout provides smoother chip evacuation and consistent cutting forces, which helps to maintain repeatable slot profiles and reduces cycle time in serial production. Stable clamping and runout control for accurate slots A robust 25 mm shank and a measured 110 mm overall length improve tool stability in the spindle, which translates into better surface quality and reduced vibration during T-slot operations. The cutter’s 40 mm diameter and cutting-edge height of 17 mm deliver the necessary engagement for typical T-slot geometries. These dimensions, together with the tool’s balanced geometry, support precise axial and radial positioning when machining fixtures or machine tables. Practical workshop benefits and maintenance ease Maintenance is simplified by the use of a single Torx fixing system: the cutter secures inserts with an M3.5x9 Torx screw and requires a T15 key for replacement, enabling quick index changes on the shop floor. The tool’s 0.509 kg mass and compact 110 mm length make it straightforward to handle and fit into typical toolholders. Compatibility with standard CCMT inserts ensures broad availability of grades for various materials and cooling strategies, offering flexibility without bespoke tooling investments. For procurement or machining consultation regarding the Teknik Makina T-slot cutter (TKC106TM), contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com for fast, expert support Technical data Article number: TKC106TM Manufacturer: Teknik Makina Facts Cutter diameter: 40 mm Number of cutting edges: 4 Overall length: 110 mm Shank diameter: 25 mm Cutting shank diameter: 20 mm Cutting length (shaft): 50 mm Cutting-edge height: 17 mm Weight: 0.509 kg Compatible inserts: CCMT 09T3 Torx screw: M3.5x9 Torx key: T15 Special features Indexable insert concept for low running costs Four-flute geometry for smooth chip flow Compact, balanced design for reduced vibration Straightforward maintenance with Torx fixing FAQ What inserts are used with this T-slot cutter? The cutter accepts CCMT 09T3 indexable inserts; this compatibility allows use of common carbide grades for different materials. What are the main dimensions and weight of the tool? Key dimensions: 40 mm cutter diameter, 25 mm shank, 110 mm overall length; weight 0.509 kg. Which screw and key are required for insert changes? Insert clamping uses an M3.5x9 Torx screw and a T15 Torx key for secure, repeatable fastening. Is the cutter suitable for high-volume production? The indexable-insert design and four-flute geometry make the cutter well suited to serial production where reduced downtime and consistent slot quality are needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-capacity T‑slot machining combines a 40 mm diameter with internal coolant to cut cycle times and improve surface quality; the solid 32 mm shank and 250 mm overall length provide the rigidity needed for deep, repeatable slots. Order the T‑nut cutter directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. T‑nut cutter TKC172TM — 40 mm diameter, internal coolant (Teknik Makina) T‑nut cutter TKC172TM is a precision milling tool for producing T‑slots using TCMT 16T3 indexable inserts, engineered for industrial and workshop milling operations. 40 mm cutter diameter for wide T‑slots Internal coolant for improved chip evacuation Compatible with TCMT 16T3 indexable inserts 32 mm shank for rigid clamping, 250 mm overall Faster, repeatable T‑slot production for series work The TKC172TM is designed to deliver consistent results across repeated cycles. The 40 mm diameter and three cutting edges produce efficient material removal while the 55° cutting angle reduces cutting forces, enabling stable feeds on machine tables and fixtures. This results in a predictable machining process that supports lean production and shorter setup times. For shops focused on throughput, the cutter’s geometry translates directly into measurable productivity gains and consistent slot geometry. Coolant-fed cutting to extend insert life and improve chip control Built with internal coolant, the tool feeds cutting fluid directly to the cutting zone, improving chip evacuation and heat dissipation. This targeted cooling preserves the edge life of the TCMT 16T3 inserts and reduces thermal loading on the workpiece, which leads to better surface finish and fewer stoppages for insert changes. The combination of coolant delivery and a 32 mm shank increases process stability, lowering vibration and enabling higher material removal rates where appropriate. Practical insert system and secure retention for workshop ease Compatibility with TCMT 16T3 indexable inserts makes reconditioning straightforward and cost‑effective: inserts are changed quickly and the cutter body accommodates standard replacement parts. Retention is secured with a M3.5x8.5 Torx screw and a T15 Torx key, providing a reliable clamping interface that minimises downtime during maintenance. With an overall length of 250 mm, the tool reaches deeper slots without compromising rigidity, making it suitable for both fixture production and machine table maintenance tasks. For coolant‑fed, high‑stability T‑slot milling from Teknik Makina, request supply and application advice from Metav Werkzeuge — direct delivery from Emmerich and personalised consultancy are available to ensure the TKC172TM fits specific process needs. Technical data Article number: TKC172TM SKU: TKC172TM Manufacturer: Teknik Makina Product: T‑nut cutter Label: 40mm T‑Nut Fräser TCMT 16T3 L250mm mit Innenkühlung Facts Cutter diameter: 40 mm Shank diameter: 32 mm Overall length: 250 mm Cutting length (shank): 50 mm Weight: 1.465 kg Cutting edges: 3 Cutting angle: 55° Torx screw: M3.5x8.5 Special features Internal coolant For TCMT 16T3 indexable inserts Torx key: T15 Indexable insert system Robust shank for secure clamping FAQ Which inserts are compatible with this cutter? The cutter is compatible with TCMT 16T3 indexable inserts and is designed to accept standard TCMT seating for efficient replacement and consistent cutting geometry. How does internal coolant benefit machining performance? Internal coolant delivers fluid directly to the cutting zone; for the TKC172TM this improves chip evacuation, reduces thermal stress on the insert and workpiece, and can extend insert life. What clamping interface secures the inserts? Inserts are secured with a M3.5x8.5 Torx screw tightened using a T15 key, providing a reliable retention method that minimises downtime during insert changes. Is the tool suitable for deep T‑slots on machine tables? With a 250 mm overall length and a 32 mm shank the cutter provides the reach and rigidity required for deeper T‑slot machining while maintaining stable cutting conditions. How many cutting edges does the tool have and what is the cutting angle? The body carries three cutting edges and a 55° cutting angle, a combination that balances material removal with stable cutting forces for repeatable slot quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from stable, repeatable T-slot machining thanks to the combination of a Ø 40 mm cutting diameter and a 25 mm shank, delivering consistent slot geometry and secure clamping; order the cutter directly via Metav Werkzeuge or contact our consultants for application advice. T-slot milling cutter TKC268TM – Ø 40 mm, M16 threaded connection (Teknik Makina) T-slot milling cutter TKC268TM for precision slotting and profile machining in industrial milling and CNC operations. Ø 40 mm cutting diameter for consistent slots 25 mm shank for secure clamping M16 threaded connection for easy mounting Consistent slot geometry for reliable production The cutter is engineered to produce uniform T-slots with minimal variation. The Ø 40 mm diameter combined with a four-flute design ensures a balanced cut and reduced vibration, which supports repeatability across batches. Stable slot profiles reduce rework and downstream assembly issues, while the 65 mm overall length offers sufficient reach for deep or recessed slots without compromising rigidity. This consistency translates directly into fewer rejects and a smoother production flow. Stable clamping and efficient performance A 25 mm shank provides a robust interface for standard tool holders, improving concentricity and tool life under higher feed rates. The M16 thread facilitates secure attachment of modular heads or adapters, enabling quick changeovers and straightforward integration into existing setups. With a low mass of 0.164 kg, the cutter minimises dynamic imbalance, allowing higher spindle speeds and steady surface finish without excessive toolholder strain. Indexable system compatibility and straightforward maintenance The tool is compatible with Korloy indexable inserts, allowing fast insert changes and the use of proven carbide grades for diverse machining tasks. The two-millimetre cutting edge height provides a predictable cut depth per pass, simplifying process planning. Replacement inserts and routine checks keep the tool performing to specification, extending service intervals and reducing downtime. Technical documentation and insert selection guidance are available to support correct setup. Contact Metav Werkzeuge for tailored integration advice and supply from Emmerich – phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss the TKC268TM and suitable insert grades Technical data Article number: TKC268TM Name: 40 mm T-slot milling cutter L 65 mm Manufacturer: Teknik Makina Core specifications Diameter: 40 mm Overall length: 65 mm Shank diameter: 25 mm Cutting edges: 4 Cutting edge height: 2 mm Thread: M16 Weight: 0.164 kg Special features T-slot milling cutter design Compatible with Korloy indexable inserts M16 threaded connection Four cutting edges for balanced cutting FAQ How is the cutter mounted? The cutter is mounted via its M16 thread and clamped using a toolholder accepting a 25 mm shank; the combination provides a secure and concentric setup for machining. Which inserts fit this tool? This tool accepts Korloy indexable inserts; the TKC268TM head is designed for quick insert changes and standard insert geometries. What are the key dimensions to consider when planning a job? Key dimensions are Ø 40 mm diameter and 65 mm overall length, with a 25 mm shank and a 2 mm cutting edge height influencing depth of cut and reach. How many cutting edges does the cutter have and what is the benefit? The cutter has four cutting edges, which produce a balanced cut, reduce vibration and improve surface finish, particularly at higher feeds. Is the cutter suitable for CNC milling operations? Yes, the cutter’s design and shank interface make it well suited for use in milling machines and machining centres where repeatable T-slot production is required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No: 9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a precision-oriented, versatile thread milling solution that combines compatibility with multiple insert sizes and robust toolholding for consistent cycle times; order the cutter directly via Metav Werkzeuge or contact our consultants for application support. DC216TM — Thread milling cutter Ø40 mm with indexable inserts (Teknik Makina) A DC216TM thread milling cutter for CNC metalworking, designed to accept indexable inserts for flexible thread production across a range of applications Thread milling cutter for indexable inserts S14–S40 40 mm nominal diameter for deep thread profiles 130 mm overall length, compact design 32 mm shank for secure holder clamping Faster thread production through adaptable insert compatibility The combination of indexable inserts compatibility and a sizeable cutting diameter means the tool is optimised for efficient cycle times in serial production. By accepting S14, S21, S30 and S40 insert sizes, the cutter reduces tooling changeover and inventory complexity, which translates into tangible productivity gains on CNC lathes and milling machines. This adaptability supports an improved cost-benefit ratio for workshops that need to switch between metric and imperial thread forms or varying material families without stocking multiple dedicated thread cutters. Secure clamping and dimensional stability for repeatable accuracy A robust 32 mm shank and a 130 mm overall length deliver stable toolholding, reducing chatter and preserving thread form during interrupted cuts. Stable clamping minimises run-out and contributes directly to repeatable surface finish and tolerance compliance in threaded components. For users not specialised in toolholder selection, the tool’s standard shank allows straightforward integration into common holders, ensuring the thread profile is produced consistently across batches and lowering scrap risk from poor fixation. Practical maintenance and quick indexable insert changes The cutter design uses standard fastenings (Torx M5x12 screws tightened with a T20 key) which simplifies insert replacement and maintenance routines. Quick insert changes shorten downtime and let production teams maintain throughput without specialised tooling for the changeover. Clear mechanical fixings also support reproducible clamping torque, which helps maintain insert seating and tool life; this delivers operational confidence and reduces the frequency of unscheduled interventions. Application range and recommended use cases With a nominal diameter of Ø40 mm, this thread mill is suited to medium-to-large threaded features in components manufactured from steels and common alloys where indexable inserts provide economic advantages. The tool serves job shops and manufacturers seeking scalable threading solutions that can adapt to various thread sizes by swapping insert types, ensuring versatility for wearing parts, housings and mechanical assemblies. When paired with appropriate feeds and speeds on CNC platforms, the cutter provides a balance of material removal rate and thread accuracy that supports both prototyping and series production. For tailored technical advice on the Teknik Makina DC216TM thread milling cutter and to discuss suitable inserts or holder options, contact Metav Werkzeuge for personalised support from Emmerich. Technical data Article number: DC216TM Name: Thread milling cutter For indexable inserts: for S14, S21, S30 and S40 Indexable Inserts Manufacturer: Teknik Makina Core data Diameter: 40 mm Overall length: 130 mm Shank diameter: 32 mm Torx screw: M5x12 Torx key: T20 SKU: DC216TM Special features Compatible insert types: S14, S21, S30, S40 Designed for CNC thread milling Robust shank for secure clamping Quick-change insert fastening (Torx) FAQ What insert sizes are compatible with this cutter? The DC216TM accepts indexable inserts in sizes S14, S21, S30 and S40, enabling quick adaptation to different thread forms and production needs. What diameter and overall length does the tool feature? The thread milling cutter has a nominal diameter of 40 mm and an overall length of 130 mm, suited to medium-to-large threaded features. Which clamping and fastening standards are used for insert changes? Insert clamping uses Torx M5x12 screws with a T20 key, allowing secure and repeatable insert replacement on the DC216TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust 40 mm diameter, 80 mm cutting length and proven compatibility with SPMG 1104 indexable inserts for efficient, repeatable hole-making; order directly via Metav Werkzeuge or consult our specialists for cutting data and holder recommendations. U940TM insert drill body — 40 mm diameter, 32 mm shank (Teknik Makina) U940TM insert drill body for medium‑deep, indexable drilling in metalworking and CNC applications 40 mm diameter for productive metal removal 80 mm effective cutting length for medium‑deep holes 32 mm shank for standard toolholders and secure clamping Compatible with SPMG 1104 indexable inserts Accurate, repeatable holes through indexable insert technology The U940TM insert drill body is engineered for consistent hole quality by combining a substantial 40 mm diameter with an 80 mm cutting length. Using indexable inserts such as SPMG 1104 enables fast insert changing and consistent cutting geometry, which reduces setup time and ensures reproducible hole tolerances. For operations that prioritise cycle time and part uniformity, the replaceable insert system delivers predictable results and a lower cost per hole compared with solid tools. Rigidity and mounting that stabilise the machining process A 32 mm shank diameter and a shank length of 58 mm provide secure clamping in conventional toolholders, reducing runout and vibration during drilling. The tool’s overall length of 178 mm and mass (approx. 1.02 kg) are balanced to maintain stability while allowing sufficient reach for standard machining envelopes. Improved rigidity directly translates into better surface finish and longer insert life, making the tool suitable for serial production where process stability is critical. Flexible tooling economy with broad insert compatibility Compatibility with insert manufacturers Taegutec and YG‑1 widens sourcing options and reduces dependence on a single supplier. The use of standard SPMG 1104 inserts simplifies stock management: fewer spare parts, faster changeovers and predictable tooling costs. For manufacturers seeking scalable solutions, the insert system supports straightforward tool optimisation — swap inserts for different grades or coatings without replacing the drill body, preserving capital investment in the holder. Practical integration into production and quality workflows The U940TM’s specifications make it straightforward to integrate into existing indexable drilling setups and CNC workflows. The tool’s geometry supports reliable chip evacuation over the 80 mm cutting length, while the defined shank can be clamped using standard fixtures to maintain concentricity. For technicians and process planners, the indexable approach reduces downtime for resharpening and allows planned insert changes to fit maintenance windows, improving overall equipment effectiveness. Contact Metav Werkzeuge for tailored cutting data, holder compatibility checks and delivery options for the Teknik Makina U940TM insert drill body; Metav’s specialists at Parkring 45 in Emmerich are available by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U940TM Manufacturer: Teknik Makina Product designation: Insert drill body (Vollbohrer) eClass: 21180201 Dimensions and core data Diameter: 40 mm Overall length: 178 mm Cutting length: 80 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.02 kg Compatibility and features Compatible inserts: SPMG 1104 Compatible insert manufacturers: Taegutec, YG‑1 Suitable for indexable insert drilling systems FAQ Which inserts fit the tool and which brands are supported? The U940TM insert drill body accepts SPMG 1104 inserts; compatible manufacturers listed for this tool include Taegutec and YG‑1, providing options for grades and coatings. What are the key dimensions for clamping and setup? Key dimensions are a 40 mm diameter, 32 mm shank diameter, 58 mm shank length, 80 mm cutting length and an overall length of 178 mm, which assists in selecting suitable holders and setting offsets. Is the tool suitable for medium‑deep hole machining? With an 80 mm cutting length the U940TM is designed for medium‑deep holes where indexable inserts offer productivity and economical insert changes compared with regrinding solid drills. How does the indexable system reduce tooling costs? Using replaceable SPMG 1104 inserts on the U940TM reduces expenditure on complete tools by allowing only the insert to be replaced when worn, and enables grade changes to match workpiece materials without replacing the drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise T-slot milling with the robust 40 mm cutting diameter and a 25 mm shank for secure clamping; the result is reliable slot geometry and efficient cycle times. Order the cutter directly via Metav Werkzeuge or consult Metav's specialists for application-specific advice. T-slot cutter TKC249TM — 40 mm, L120 mm (Teknik Makina) A T-slot cutter designed for controlled T-slot milling in machine tables and profile systems. 40 mm cutting diameter 120 mm overall length 25 mm shank diameter Two cutting edges, 60° angle Increase throughput with consistent T-slot geometry The TKC249TM is engineered to deliver repeatable slot profiles through a combination of a 40 mm cutting diameter and two cutting edges, which balance material removal and surface finish. A 60° cutting angle helps define the slot flank geometry with reduced burr formation; this is especially beneficial where subsequent assembly or sliding fit is required. By selecting a cutter with these parameters, cycle times can be shortened while maintaining the dimensional consistency expected in serial production and precision workshops. Secure clamping for reduced runout and improved surface finish A 25 mm shank paired with a 120 mm overall length provides a stable interface with standard milling holders. Secure clamping of the shank reduces radial runout, which directly improves concentricity and prolongs tool life. Stability during cutting translates into better surface appearance of the machined slot and fewer rework operations, supporting leaner manufacturing processes and predictable results in repetitive machining tasks. Simple retention and maintenance for uninterrupted operation Retention and service are straightforward: the cutter uses a T15 key for the Torx screw and a M3.5x8.5 screw for insert or head retention. These standardised small parts simplify replacement and torque procedures, allowing maintenance to be performed quickly at the bench. The tool’s modest mass also makes handling and changeover fast, contributing to shorter set-up intervals and higher machine uptime in busy workshops. Optimised for workshop efficiency and adaptability Designed as a focused solution for T-slot creation, the cutter combines dimensional clarity with everyday usability. The geometry reduces secondary operations by producing a ready-to-use slot profile, which is particularly advantageous where time-to-assembly matters. Operators and production planners benefit from the cutter’s balanced specification: dimensional stability, predictable wear characteristics, and compatibility with common clamping systems help integrate the tool into existing machining routines without lengthy requalification. Contact Metav Werkzeuge for tailored application advice on the TKC249TM T-slot cutter and secure supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TKC249TM Product: T-slot cutter Brand: Teknik Makina Label: 40 mm T-slot cutter L120 mm Core specifications Diameter: 40 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length (shank): 30 mm Number of cutting edges: 2 Cutting angle: 60° Weight: 0.44 kg Materials & features Torx key: T15 Retention screw: M3.5x8.5 Article code: eClass 21180605 Product type: T-slot cutter UID: TKC249TM FAQ What slot diameter does the cutter produce? The cutter produces slots based on a 40 mm cutting diameter; the exact finished slot size depends on machine settings and depth of cut. Is the shank suitable for standard milling holders? The 25 mm shank is intended for secure clamping in common tool holders and collet chucks, providing reduced runout and stable cutting. How many cutting edges are on the tool and what is the angle? The tool has two cutting edges with a 60° cutting angle, a combination chosen to balance removal rate and surface finish for typical T-slot profiles. Which screw type secures the cutter components? Retention is via a Torx screw sized M3.5x8.5, tightened with a T15 Torx key as specified for the design. Can this cutter be used for long series production? Yes, the cutter’s stable geometry and 25 mm shank support repeatable results; regular inspection of the retention screw and cutting edges is recommended to sustain performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise compatibility with MGMN 200 indexable inserts, a compact 40 mm cutting diameter and a robust 25 mm shank for reliable, repeatable T-slot machining — order via Metav Werkzeuge or request expert advice from our consultants in Emmerich. T-slot cutter for MGMN 200 indexable inserts — 40 mm, L65 mm (Teknik Makina) A T-slot cutter designed to machine T-nuts and T-slots using MGMN 200 indexable inserts, optimised for workshop and small-series production. 40 mm cutting diameter for standard T-slots Compatible with MGMN 200 indexable inserts 25 mm shank diameter for rigid clamping M16 thread for secure insert mounting Consistent cut quality through optimised insert compatibility The tool is engineered around the MGMN 200 insert format, providing a predictable cutting geometry that simplifies process planning. With 2 cutting edges and a 2 mm cutting-edge height, the design balances material removal and surface integrity. Using standardised Korloy inserts reduces qualification time for tooling and ensures fast replacement when an edge is spent, which keeps machine downtime to a minimum. The result is improved throughput and consistent slot profiles across batches. Rigid mounting and reduced vibration for longer life A 25 mm shank provides a solid clamp area for collets or shrink-fit holders, increasing rigidity and reducing chatter during slotting operations. The M16 thread secures the insert head for positive seating and repeatable positioning. With an overall length of 65 mm, the tool keeps overhang modest for many set-ups, helping to maintain dimensional accuracy. These mechanical choices translate into fewer rejected parts and less time spent on rework. Practical handling and serviceability in the workshop The cutter’s compact mass (0.138 kg) makes it easy to fit and handle during set-up while keeping spindle load low in typical milling machines. The required Allen key size is 6 mm, simplifying insert changes and ensuring safe torque application for clamping. Because the cutter uses indexable inserts, maintenance is limited to periodic insert replacement rather than regrinding, which reduces tooling inventory complexity and speeds up turnaround. For bespoke set-ups or compatibility checks, Metav’s technical team can advise on holders and machine parameters. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Makina T-slot cutter into production and for assistance with insert sourcing and clamping recommendations Technical data Article number: TKC278TM Product: T-slot cutter for MGMN 200 indexable inserts Manufacturer: Teknik Makina Label: 40mm T-Nut Fräser MGMN 200 L65mm Facts Diameter: 40 mm Overall length: 65 mm Shank diameter: 25 mm Cutting edges: 2 Cutting edge height: 2 mm Weight: 0.138 kg Thread: M16 SKU: TKC278TM Special features Compatible with MGMN 200 indexable inserts Suitable for Korloy inserts Allen key size: 6 mm FAQ Which inserts fit this cutter? The cutter is designed for MGMN 200 indexable inserts and is compatible with Korloy insert types specified for that geometry. What shank diameter is required for secure clamping? A 25 mm shank provides the clamp diameter; use holders or collets rated for 25 mm to ensure rigidity for the cutter. What is the overall length and typical application? The tool has a 65 mm overall length and is intended for machining T-slots and T-nuts in workshop and small-series milling operations. How many cutting edges does the cutter have and what is the edge height? The cutter features 2 cutting edges with a 2 mm cutting-edge height, optimised for stable material removal and clean slot walls. What thread is used to secure the insert head? The cutter uses an M16 thread for secure and repeatable insert head mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take the robustness of a 41 mm tool body together with a 32 mm shank and 300 mm overall length to maintain stable boring cycles and reduced vibration; the compatibility with VER27 indexable inserts ensures fast replacement of cutting edges and predictable runtime. Order the K345-5TM via Metav Werkzeuge or consult our advisers for application-specific setup. Boring bar K345-5TM — 41 mm, L 300 mm (Teknik Makina) Boring bar K345-5TM for secure machining with VER27 indexable inserts, designed for medium-deep boring tasks and stable toolholding 41 mm diameter body for rigidity Compatible with VER27 indexable inserts 300 mm overall length for extended reach 32 mm shank diameter for firm clamping Stable cutting performance for consistent cycle times The solid design provides a rigid toolbody that reduces chatter and maintains concentricity throughout the cut. With a 41 mm diameter and an overall length of 300 mm, the bar is engineered to deliver predictable results in repetitive operations; this stability translates directly into reduced rework and improved part quality. The use of VER27 indexable inserts means cutting edges can be exchanged without regrinding, which keeps spindle downtime to a minimum and supports continuous production. Fast set-up and secure clamping to save machine time Clamping is simplified by the 32 mm shank and a dedicated clamping area, with the top insert clamping width at 25 mm ensuring the cutting head sits firmly. The required Torx T20 connection standardises the tightening procedure and shortens tool changes. These design choices result in shorter set-up times on the machine and more predictable tool life, aiding shop-floor scheduling and increasing throughput. Compatibility with established insert systems reduces inventory complexity and speeds maintenance. Workshop-ready construction and practical handling Weighing 1.95 kg, the bar balances mass and handling for both manual and automated tool changes. The geometry supports insertion of VER27 indexable inserts and is identified under K345-5TM, making reordering straightforward. The tool is produced by Teknik Makina to machining-oriented tolerances suitable for production environments; documentation and SKU labelling support traceability and inventory control. For operations requiring extended reach and reliable repeatability, this bar provides a robust platform for efficient boring cycles. Contact Metav Werkzeuge for bespoke machining advice and to secure the K345-5TM 41 mm boring bar from Teknik Cutting Tools; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for prompt assistance and dispatch from Emmerich Technical data Article number: K345-5TM Product type: Boring bar Brand: Teknik Makina Core data Diameter: 41 mm Overall length: 300 mm Shank diameter: 32 mm Clamp/head width: 25 mm Weight: 1.95 kg Special features Compatibility: VER27 indexable inserts Torx key: T20 Label: 41mm boring bar VER27 L300mm Category: Bohrstangen / Boring bars FAQ Which insert type fits this boring bar? This boring bar accepts VER27 indexable inserts; the K345-5TM is configured for that insert family and straightforward edge replacement. What are the main dimensions to check for holder compatibility? Key dimensions are 41 mm body diameter, 32 mm shank diameter and 300 mm overall length for reach and clamping planning. Which toolholder or collet is required for the shank? The 32 mm shank requires a holder compatible with a 32 mm shank diameter and a clamping system able to secure the bar for boring operations. What fastener is used for the insert clamping? Insert clamping uses a Torx T20 interface; ensure the correct bit is available for secure tightening. How is the product identified for reordering? Reorder by SKU K345-5TM, labelled as a 41 mm boring bar for VER27 inserts and supplied by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust clamping, precise 3 mm parting capability and a stable 32 mm shank for consistent cycle times; order directly through Metav Werkzeuge or consult our specialists for application advice. Stechklemmhalter K626TM — Parting tool holder with 32 mm shank and 50 mm cutting height by Teknik Makina Stechklemmhalter K626TM is designed as a compact, high-stability parting tool holder for standard turning centres, enabling controlled chip separation and repeatable grooving operations. 32 mm shank for stable mounting 50 mm cutting height for deep operations Accepts 3C indexable inserts 3 mm cutting width for precise parting Stable mounting for reliable parting cycles A solid mounting interface is decisive for predictable parting results. The holder features a 32 mm shank and an overall length of 250 mm, creating a rigid connection to the tool post and reducing vibration during cut-off operations. The combination of shaft dimensions and mass (1.56 kg) improves parting accuracy and surface finish, while the substantial 50 mm cutting height provides clearance and tool projection options for deeper cuts. In practice, a stable toolholder reduces scrap rates and machine downtime by keeping the insert engagement consistent throughout each cycle. Fast insert changes and reduced machine downtime Clamping design and insert compatibility determine shop-floor efficiency. This tool accepts 3C indexable inserts and is matched to a clamping unit 3C-R S229, allowing secure clamping with minimal adjustment time. The 3 mm cutting width supports narrow parting and grooving tasks where material waste is minimised and cutting forces are concentrated. Rapid insert replacement and clear geometric references mean less time at the machine and quicker return to full production, which directly improves throughput and lowers per-part machining costs. Designed for predictable results in everyday turning Integration with standard bar designations (bar: S32S) simplifies tool selection and replacement across multiple lathes. The holder’s geometry and clamping principle are intended for consistent chip control and repeatable set-up: once configured, repeatability is ensured by the mechanical interfaces rather than by trial adjustments. For engineers and workshop managers, this means a reliable base for process documentation and quality assurance—beneficial when establishing machining parameters, SPC checks or when training personnel on stable parting routines. Contact Metav Werkzeuge for application guidance and to secure the Teknik Makina parting tool holder K626TM; expert advice and ordering assistance are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K626TM Manufacturer: Teknik Makina Designation: Stechklemmhalter Manufacturer sku: K626TM Core data Shank diameter: 32 mm Cutting height: 50 mm Cutting width: 3 mm Overall length: 250 mm Diameter: 41 mm Weight: 1.56 kg Special features For indexable inserts: 3C Clamping designation: 3C-R S229 Bar designation ISO: S32S Suitable for parting and grooving operations FAQ What insert type does this holder accept? The Stechklemmhalter K626TM accepts 3C indexable inserts, secured with the compatible clamping unit 3C-R S229 for reliable seating. Which shank diameter is required for installation? The holder is manufactured with a 32 mm shank, matching standard tool-post mounts for secure installation and reduced vibration. How deep can the holder support cutting operations? With a 50 mm cutting height the holder is suitable for moderate-depth parting and grooving tasks while maintaining rigidity. Is this holder suitable for narrow parting applications? Yes, the 3 mm cutting width supports narrow parting widths where controlled chip evacuation and minimal material loss are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust, indexable design combined with a long cutting reach and secure 32 mm shank for consistent holemaking in production environments; order directly via Metav Werkzeuge or consult our specialists for application advice. Indexable drill U186TM — Ø 41 mm, 123 mm cutting length (Teknik Makina) The Indexable drill U186TM is an insert-drilling solution engineered for demanding holemaking tasks where fast insert changes and repeatable results are required Ø 41 mm cutting diameter 123 mm effective cutting length Compatible with Korloy WCM-06T3 inserts Robust 32 mm shank for secure clamping High-efficiency holemaking with replaceable inserts The U186TM is designed as an indexable drill to deliver efficient material removal while reducing tooling costs. By using replaceable inserts such as Korloy WCM-06T3, cutting edges can be renewed in seconds without regrinding, which lowers per-hole costs and shortens machine downtime. The tool’s geometry supports stable chip evacuation and predictable cutting forces; this means cycle times can be optimised and process planning becomes more reliable. For production-focused shops, the combination of insert economy and predictable performance is a clear operational advantage. Stable clamping and consistent surface quality A substantial 32 mm shank provides secure clamping and reduces vibration during spindle rotation, which helps maintain hole tolerance and surface finish across long runs. With a 41 mm nominal diameter and a 123 mm cutting length, the tool reaches deeper bores while the 232 mm overall length preserves access to recessed features. These dimensions support both tooling rigidity and reach, so hole positional accuracy and roundness are improved. Selecting the correct clamping system and ensuring runout is minimised will further enhance repeatability on the shop floor. Practical integration and straightforward maintenance This indexable solution has been configured for straightforward integration into CNC drilling cycles and machining centres. Insert seating and clamp design are optimised for quick replacement of WCM-06T3 inserts to keep set-up time to a minimum. Routine inspection of the insert pockets and a clean coolant supply extend component life and maintain cutting stability. If clarification is needed about insert grades or cycle parameters, technical guidance is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to ensure correct selection and safe operation. For application support or purchase coordination from Metav Werkzeuge in Emmerich, please contact our specialists at +49 2822 7131930 or info@metav-werkzeuge.com to check compatibility and delivery options for the Teknik Makina U186TM. Technical Data Article number: U186TM Manufacturer: Teknik Makina Type: Indexable drill Facts Diameter: 41 mm Cutting length: 123 mm Total length: 232 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.465 kg Special features Compatible with Korloy WCM-06T3 inserts Designed for quick insert replacement Suited for CNC drilling cycles FAQ Which inserts fit this drill? The drill accepts Korloy WCM-06T3 inserts; the seating is specified for this insert type to ensure correct geometry and chip control. What is the maximum effective drilling depth? The effective cutting length is 123 mm, which defines the practical drilling depth without extended tooling or special adapters. Which shank size is required for clamping? A 32 mm shank is provided for secure clamping; appropriate collet or holder selection is advised to minimise runout. Is the tool suitable for CNC machining centres? Yes, the indexable design and dimensions (overall length 232 mm) make it suitable for integration in CNC drilling cycles and machining centres. How are worn inserts replaced? Worn inserts are replaced by loosening the clamp screw, exchanging the WCM-06T3 insert and re-torquing per the tool manufacturer’s instructions to maintain cutting geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Einschraubfräser für LNMU 0303 Wendeplatten Einschraubfräser für präzise Innenkühlung und universelle Fräsaufgaben mit LNMU 0303 Wendeplatten 42 mm Durchmesser für vielseitige Fräsanwendungen Innenkühlung erhöht Standzeit und Spanabfuhr Kompatibel mit LNMU 0303 Wendeplatten von Tungaloy sechs Schneiden für gleichmäßigen Materialabtrag Höhere Produktivität durch optimierte Schneidgeometrie Die Kombination aus sechs Schneiden und einer Schneidenhöhe von 40 mm ermöglicht gleichmäßige Schnittkräfte und eine stabile Spanbildung. Dadurch lassen sich Vorschub und Schnitttiefe wirtschaftlich ausnutzen, ohne die Prozesssicherheit zu gefährden. Insbesondere bei Mehrpassbearbeitungen reduziert diese Konstruktion Rüstzeiten und erhöht die Gesamtdurchsatzrate in der Fertigung. Die präzise Zerspanung verbessert Oberflächenqualität und Wiederholgenauigkeit. Innenkühlung für konstante Bearbeitungsbedingungen Die integrierte Innenkühlung führt das Kühlmittel direkt zur Schneide und sorgt so für effektive Wärmeabfuhr und verbesserte Spanabfuhr. Das Ergebnis ist geringerer Werkzeugverschleiß und stabilere Schnittbedingungen, gerade bei anspruchsvollen Werkstoffen oder unter erhöhter Schnittgeschwindigkeit. Die Möglichkeit, Kühlmittel gezielt einzusetzen, erleichtert die Prozessoptimierung und trägt zu längeren Standzeiten und planbaren Produktionszyklen bei. Kompatibilität mit LNMU 0303 und Tungaloy Wendeplatten Dieses Werkzeug ist speziell ausgelegt für die Aufnahme von LNMU 0303 Indexplatten und wurde auf Kompatibilität mit den Einsätzen von Tungaloy abgestimmt. Die klare Zuordnung zu dieser Plattengröße vereinfacht die Werkzeugauswahl in der Werkstatt und ermöglicht schnellen Plattenwechsel ohne zusätzliche Adapter. Anwender profitieren von bewährten Plattensorten und einer breiten Auswahl an Schneidstoff- und Beschichtungsoptionen der Plattenhersteller. Montage, Handhabung und Betriebsfreundlichkeit Der Fräskopf lässt sich mit der mitgelieferten Befestigung sicher montieren; die Torx Schraube M2,5x7 wird mit dem Torx Schlüssel T8 angezogen, was einfachen und reproduzierbaren Austausch der Wendeplatten erlaubt. Die Gewindeaufnahme mit einer Höhe von 23 mm und einem Gewinde von 16 gewährleistet eine formschlüssige Verbindung zum Halter. Gesamtlänge 63 mm und ein Durchmesser von 42 mm erleichtern die Integration in gängige Fräsaufbauten. Für rationelle Fertigungsprozesse empfehlen wir den innengekühlten Einschraubfräser von Teknik Makina, kompatibel mit LNMU 0303 Wendeplatten von Tungaloy — persönliche Beratung und Lieferung durch Metav Werkzeuge sorgen für schnelle Verfügbarkeit und passgenaue Einsatzempfehlungen Produktmerkmale Artikelnummer: VT308-1TM Bezeichnung: Einschraubfräser für LNMU 0303 Wendeplatten Hersteller: Teknik Makina Produktart: Einschraubfräser Daten Durchmesser: 42 mm Gesamtlänge: 63 mm Schneiden: 6 Schneidenhöhe: 40 mm Gewindehöhe: 23 mm Gewinde: 16 Besonderheiten Innenkühlung: Kühlmittelzufuhr zur Schneide Passend für Wendeplatten: LNMU 0303 Passend für Wendeplatten Hersteller: Tungaloy Torx Schraube: M2,5x7 (Befestigung der Wendeplatte) Torx Schlüssel: T8 (zum Anziehen der Torx Schraube) FAQ Ist der Fräser mit LNMU 0303 Wendeplatten kompatibel? Ja, der Einschraubfräser ist für die Aufnahme von LNMU 0303 Wendeplatten ausgelegt und bietet eine direkte Kompatibilität mit den Standardmaßen dieser Platten. Kann ich Wendeplatten von Tungaloy verwenden? Der Fräser wurde so konstruiert, dass er mit Einsätzen von Tungaloy harmoniert; für die optimale Auswahl empfiehlt sich eine Abstimmung der Plattensorte auf das Werkstückmaterial. Wie erfolgt der Wendeplattenwechsel? Die Wendeplatte wird mit einer Torx Schraube M2,5x7 befestigt und mit dem Torx Schlüssel T8 sicher angezogen, was schnellen und reproduzierbaren Wechsel erlaubt. Welche Abmessungen sind für die Halterung relevant? Wichtige Maße sind der Durchmesser 42 mm, die Gesamtlänge 63 mm sowie die Gewindehöhe 23 mm und das Gewinde 16 für die Aufnahme in handelsübliche Halter. Eignet sich das Werkzeug für hohe Schnittgeschwindigkeiten? Die Innenkühlung unterstützt höhere Schnittparameter durch effiziente Wärmeabfuhr; die tatsächlichen Schnittwerte hängen jedoch von Werkstückmaterial, Beschichtung der Wendeplatte und Maschinengattung ab. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Kombination aus Wirtschaftlichkeit, hoher Standzeit und einfacher Handhabung für reibungslose Fräsprozesse; passend für Tungaloy Wendeplatten vom Typ LNMU 0303. Beratung und Bestellung über Metav Werkzeuge möglich. Einschraubfräser für LNMU 0303 Wendeplatten Der Einschraubfräser ist ein robustes Werkzeug zur wirtschaftlichen Planbearbeitung und wurde speziell für die Aufnahme von LNMU 0303 Wendeplatten entwickelt Einschraubfräser »LNMU 0303« kompatibel mit Tungaloy 42 mm Durchmesser für hohe Materialabträge 6 Schneiden für ruhigen Lauf und gleichmäßigen Span Gesamtlänge 63 mm, Schneidenhöhe 40 mm M16 Gewinde, Einschraubhöhe 23 mm Präzision und Standzeit für effiziente Fertigung Mit einem Durchmesser von 42 mm und 6 Schneiden bietet dieses Werkzeug eine ausgewogene Kombination aus Zerspanleistung und Laufruhe. Die Anzahl der Schneiden reduziert die Schnittkräfte und sorgt für eine konstantere Oberfläche an bearbeiteten Teilen. Durch die größere Schneidenzahl steigt die Standzeit der Wendeplatten, was die Werkzeugwechselintervalle verlängert und die Produktivität in der Fertigung erhöht. Die Abstimmung von Schneidengeometrie und Trägermaterial führt zu einer stabilen Spanabfuhr und einem gleichmäßigen Schnittbild. Einfache Montage und zuverlässige Verbindung Die Konstruktion mit M16 Gewinde und einer Einschraubhöhe von 23 mm vereinfacht die Montage in passenden Haltern und gewährleistet festen Sitz während des Betriebs. Die Gesamtlänge von 63 mm und die Schneidenhöhe von 40 mm ermöglichen gleichzeitig tiefe Schnitte und gute Zugänglichkeit an Werkstückkanten. Die Verwendung standardisierter Befestigungselemente reduziert Stillstandzeiten und erleichtert die Ersatzteilversorgung. Durch die klare Mechanik werden Vibrationen minimiert und die Wiederholgenauigkeit bei Serie verbessert. Kompatibilität mit Tungaloy Wendeplatten und Einsatzgebiete Das Werkzeug ist ausgelegt für Wendeplatten des Typs LNMU 0303 und eignet sich ausdrücklich für Platten des Herstellers Tungaloy, wodurch sich bewährte Schneidstoff- und Beschichtungsvarianten nutzen lassen. Diese Kompatibilität ermöglicht den Einsatz in der Fein- und Grobbearbeitung von Stahl und legierten Werkstoffen sowie in vielen allgemeinen Fräsaufgaben. Anwender profitieren von der Verfügbarkeit etablierter Plattentypen und dem breiten Sortiment an Beschichtungen für unterschiedliche Schnittbedingungen. Handling, Befestigung und Wartungshinweise Für die Befestigung werden Torx Elemente verwendet: Torx Schlüssel T8 und Torx Schraube M2,5x7 sind Teil der Handhabung und erleichtern den Plattenwechsel ohne Spezialwerkzeug. Regelmäßige Sichtkontrolle der Schraubverbindungen und das korrekte Anzugsdrehmoment sichern die Lebensdauer des Fräsers und der Wendeplatten. Eine saubere Schnittstelle zwischen Halter und Fräskörper verhindert unkontrollierte Schwingungen und sorgt für reproduzierbare Oberflächenqualität. Technische Beratung zur optimalen Einstellung ist über Metav verfügbar. Empfehlung: Der 42 mm Fräser von Teknik Makina ist ideal für präzise Planfräsungen mit LNMU 0303 Wendeplatten von Tungaloy — Beratung und Bestellung über Metav Werkzeuge GmbH, eMail info@metav-werkzeuge.com, Tel +49 2822 7131930_ Produktmerkmale Artikelnummer: VT308TM Bezeichnung: Einschraubfräser für LNMU 0303 Wendeplatten Marke: Teknik Makina Produktart: Einschraubfräser Fakten Durchmesser: 42 mm Gesamtlänge: 63 mm Schneiden: 6 Schneidenhöhe: 40 mm Gewinde: M16 Einschraubhöhe: 23 mm Gewicht: 0,321 kg Besonderheiten Passend für Wendeplatten: LNMU 0303 Passend für Wendeplatten Hersteller: Tungaloy (Original Wendeplatten Hersteller) Torx Schlüssel: T8 Torx Schraube: M2,5x7 SKU: VT308TM FAQ Ist der Fräser mit anderen Wendeplattenformaten kompatibel? Der Einschraubfräser ist speziell für LNMU 0303 Wendeplatten ausgelegt; andere Formate erfordern eine Prüfung der Plattenaufnahme und können abweichen. Welche Vorteile bieten die 6 Schneiden im Vergleich zu weniger Schneiden? Sechs Schneiden reduzieren die Schnittbelastung pro Schneide, führen zu ruhigerem Lauf und erhöhen die Standzeit der Wendeplatten bei gleichbleibender Oberflächenqualität. Wie wird die Wendeplatte sicher befestigt? Die Wendeplatte wird mit der vorgesehenen Torx Schraube M2,5x7 befestigt; empfohlen wird der Einsatz eines Torx Schlüssels T8 mit passendem Anzugsdrehmoment zur Sicherstellung des festen Sitzes. Für welche Werkstoffe ist das Werkzeug geeignet? Der Fräser ist für allgemeine Fräsaufgaben konzipiert und kann für Stahl und legierte Werkstoffe verwendet werden; die endgültige Einsatzempfehlung richtet sich nach gewählter Wendeplatten- und Beschichtungsvariante. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact design, reliable insert compatibility and internal coolant delivery for consistent face milling in confined set-ups; the 42 mm diameter, four-edge cutting concept and 90° cutting angle make it an efficient choice for standard finishing operations. Order supply or request bespoke advice via Metav Werkzeuge for seamless procurement and technical support. Face-milling head T382TM (42 mm) with internal coolant — for SDNW 1205 indexable inserts by Teknik Makina The Face-milling head T382TM is a compact cutter head engineered for face milling with SDNW 1205 indexable inserts, offering internal coolant and a short overall length for stable machining in confined tool envelopes. 42 mm diameter for compact setups Internal coolant for improved chip evacuation 4 cutting edges for consistent material removal Compatible with Hitachi SDNW 1205 inserts Stable performance in tight tool envelopes The compact 42 mm diameter and short 40 mm overall length reduce overhang and vibration, improving surface finish and repeatability in small setups. A reduced projection means the milling assembly requires less counterbalance and produces fewer deflection-related deviations, which is particularly useful for precise finishing passes and where fixture space is limited. The low mass (0.235 kg) contributes to dynamic stability during acceleration and deceleration phases. Reliable productivity through proven insert compatibility Designed for the SDNW 1205 family of indexable inserts and compatible with Hitachi-supplied grades, the head accommodates four cutting edges that allow multiple indexings before replacement. The 90° cutting angle provides a true face-milling geometry that simplifies programme planning and achieves uniform material removal across the workpiece, reducing cycle time fluctuations and minimising rework. Coolant-through design for longer tool life and cleaner machining The internal coolant channel directs coolant to the cutting zone, enhancing heat dissipation and chip control. Improved cooling reduces thermal wear on the insert cutting edge and supports more consistent edge retention, which translates into longer service intervals and fewer unscheduled stops. In addition, focused coolant flow helps to evacuate chips from the cutting zone, supporting better surface quality and reduced risk of recutting. Secure fastening and straightforward maintenance Assembly uses Torx T15 drive screws (M4x10), providing positive engagement during insertion and maintenance operations and ensuring repeatable clamping torque. The robust fixing method supports consistent seat orientation for the inserts and simplifies changeover procedures on the shop floor. The tool is identified as SKU T382TM, enabling straightforward stock control and reordering through established procurement channels. Contact Metav Werkzeuge for delivery options and technical guidance on the Teknik Makina face-milling head T382TM with internal coolant, and benefit from Metav’s European distribution and specialist advice. Technical data SKU: T382TM Product type: Face-milling head Manufacturer: Teknik Makina Description: for SDNW 1205 Indexable Inserts Numbers / Core technical data Diameter: 42 mm Overall length: 40 mm Weight: 0.235 kg Number of cutting edges: 4 Cutting angle: 90° Special features / Versions Internal coolant (through-coolant) Compatible with SDNW 1205 inserts Compatible with Hitachi insert variants Fastening: Torx T15, screw M4x10 FAQ What insert type fits this cutter head? The cutter head is designed for SDNW 1205 indexable inserts and accepts compatible grades from Hitachi for standard finishing applications. Is the tool suitable for confined workspaces? Yes, the compact 42 mm diameter and 40 mm overall length make the milling head appropriate for tight set-ups where reduced overhang is required. Does the head provide coolant to the insert? The unit features internal coolant to the cutting zone, supporting chip evacuation and improved thermal control at the edge. How many cutting edges are available before insert replacement? The head accepts inserts with four cutting edges, enabling multiple indexings to extend service intervals. Which fastening hardware is used for insert clamping? Fastening is carried out with Torx T15 screws, specification M4x10, ensuring secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com