Gibt es einen Hahn und Kolb Online Shop?

Benefit from precise, long-reach drilling combined with reliable insert compatibility and secure clamping for consistent production throughput; order the tool directly via Metav Werkzeuge or consult the technical team for application support. Vollbohrer U192TM — Indexable insert drill body with Ø 44 mm and 132 mm cutting length (Teknik Makina) The Vollbohrer U192TM is an indexable drill body designed for industrial drilling tasks, compatible with Korloy WCM-06T3 inserts and intended for integration into CNC and production drilling setups Ø 44 mm cutting diameter 132 mm effective cutting length 32 mm shank diameter for secure clamping Compatible with Korloy WCM-06T3 inserts Robust construction, weight 1.916 kg Increased productivity through extended cutting reach The U192TM drill body delivers a 132 mm cutting length paired with a Ø 44 mm drill diameter, enabling deep or stepped holes without frequent tool changes. The extended effective length reduces cycle interruptions and supports continuous operation in series production. By combining long reach with a stable body design, the tool helps to maintain consistent chip evacuation and stable cutting conditions, which in turn contributes to measurable productivity gains and a favourable cost-per-hole ratio. Stable clamping and repeatable runout control A 32 mm shank diameter with a 58 mm shank length ensures secure clamping in standard toolholders, improving concentricity and minimising runout. The relatively heavy construction (approx. 1.916 kg) increases mass damping, which helps to reduce vibration in moderate-duty drilling operations. These mechanical characteristics support repeatable hole quality and dimensional consistency across batches, making the drill body suitable for demanding repeat-production contexts where process stability is critical. Economical indexable system with Korloy compatibility The body accepts Korloy WCM-06T3 indexable inserts, allowing only the cutting tips to be replaced rather than the entire tool. This approach lowers tooling expenses and shortens maintenance intervals while preserving cutting-edge geometry. Compatibility with an established insert designation simplifies spare-part logistics and reduces setup time when inserts are exchanged, yielding a clear operational advantage for workshops and production lines seeking efficient tool maintenance. Compact overall dimensions for integration and handling With an overall length of 242 mm, the drill body balances reach with manageable tool envelope for installations in multi-axis machines and gang-tooling setups. The combination of measured overall length and a robust body design supports straightforward storage and handling procedures while contributing to safe, predictable machine integration. The tool's specifications make it well suited for incorporation into standard cutting-tool inventories and for coordinated supply via established distributors. For application advice, delivery options and near-site availability of the Teknik Makina U192TM, contact Metav Werkzeuge for tailored technical guidance and fast dispatch from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930. Technical data Article number: U192TM Manufacturer: Teknik Makina Product name: Vollbohrer Compatible insert manufacturer: Korloy Compatible insert type: WCM-06T3 Facts Diameter: 44 mm Cutting length: 132 mm Overall length: 242 mm Shank diameter: 32 mm Shank length: 58 mm Weight: 1.916 kg Special features Indexable insert drill body Compatible with Korloy WCM-06T3 inserts Robust construction for production use FAQ What insert type fits this drill body? The drill body accepts Korloy WCM-06T3 inserts; the U192TM is supplied as an indexable system designed for that insert designation. Which shank size is specified for clamping? Clamping is specified for a 32 mm shank diameter with a 58 mm shank length on the U192TM to ensure secure toolholder engagement. What are the main dimensions to check before machine installation? Key dimensions are Ø 44 mm diameter, 132 mm cutting length and 242 mm overall length for the U192TM drill body. Is the tool suited for series production? Yes, the indexable design and long cutting length make the U192TM suitable for series production where reduced tool-change frequency and consistent hole quality are required. How does insert replacement affect operating costs? Using replaceable Korloy inserts on the U192TM lowers overall tooling costs because only worn inserts are replaced, reducing material waste and downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of large cutting capacity and a long cutting reach for efficient internal machining; the high rigidity and compatibility with CCMT 09T3 indexable inserts support reproducible results and reduced set-up times. Order via Metav Werkzeuge or consult the team for application-specific guidance. Boring tool TKB122TM by Teknik Makina — Ø 56 mm capacity, for CCMT 09T3 inserts Boring tool TKB122TM designed for precision internal machining in production and workshop environments, providing extended cutting reach and stable support for indexable inserts. Compatible with CCMT 09T3 inserts Max cutting diameter Ø 56 mm Shaft diameter 32 mm Cutting length 200 mm Large cutting capacity for fewer re‑set operations The TKB122TM offers a max cutting diameter of Ø 56 mm, enabling larger internal bores without multiple tool changes. This capacity reduces non-productive time and simplifies process planning in batch production or repair work. The compatibility with CCMT 09T3 indexable inserts means inserts can be replaced quickly when worn, preserving toolholder alignment and avoiding extended downtime. For shops seeking predictable cycle times, the combination of insert system and cutting reach translates into measurable efficiency gains. Stiff shaft and extended reach for steady cutting performance A substantial shaft diameter of 32 mm and a cutting length of 200 mm give the tool a favourable stiffness-to-length ratio. Increased rigidity reduces chatter and improves surface finish during internal machining; the design supports consistent chip evacuation when paired with suitable insert geometry. The tool’s overall length 260 mm and mass (listed as weight 2.385 kg) contribute to stable cutting dynamics, particularly when machining demanding profiles. The result is improved dimensional control and fewer reworks, which directly benefits production reliability. Efficient integration and supply from a trusted partner The TKB122TM is designed for straightforward integration into existing tooling setups that accept CCMT insert formats. Its use of a proven insert standard supports flexibility: the same insert grade can be used across multiple toolholders to simplify inventory. Metav Werkzeuge supplies this Teknik Makina tool from Emmerich with an emphasis on dependable logistics and technical support. Metav’s role as a precision partner is reflected in a broad product range and a track record of thousands of satisfied industrial customers, ensuring the boring bar arrives promptly and ready for installation. For a technical assessment or to secure supply of the Teknik Makina TKB122TM, contact Metav Werkzeuge for tailored advice and ordering from Emmerich. Technical data SKU: TKB122TM Manufacturer: Teknik Makina Max cutting diameter: 56 mm Nominal diameter: 45 mm Shaft diameter: 32 mm Cutting length: 200 mm Overall length: 260 mm Weight: 2.385 kg Special features Compatible insert type: CCMT 09T3 Indexable insert system for fast replacement Designed for internal boring applications Robust shaft geometry for reduced vibration FAQ What insert type fits this boring bar? The TKB122TM is designed for CCMT 09T3 indexable inserts, allowing quick replacement and consistent cutting geometry. Can the boring bar handle deep internal bores? With a cutting length of 200 mm and overall length of 260 mm, the tool is intended for extended internal reach while maintaining stiffness. How does shaft diameter affect performance? A shaft diameter of 32 mm increases rigidity and reduces deflection, which improves surface finish and dimensional accuracy during boring operations. Is the TKB122TM suitable for production use? Yes; the combination of a large cutting capacity, indexable inserts and a stable shaft design supports reproducible results in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 32 mm shank for high rigidity, a 70 mm cutting length for deeper bore finishing and compatibility with CCMT 09T3 indexable inserts to reduce tooling costs and downtime. Order the Ausbohrwerkzeug directly via Metav Werkzeuge or consult our specialists for application advice. Ausbohrwerkzeug TKB118TM – Internal boring bar, indexable system, Ø up to 56 mm (Teknik Makina) The Ausbohrwerkzeug TKB118TM is an internal boring bar designed for precision bore enlargement and finishing using indexable CCMT 09T3 inserts; suited to workshop and production environments where repeatability and fast insert changes are required Indexable for CCMT 09T3 inserts Max cutting diameter 56 mm 32 mm shank diameter for rigid clamping 70 mm cutting length for deep bores Precision bore finishing with indexable inserts The tooling is engineered to deliver consistent bore geometry through a rigid 32 mm shank and a substantial cutting reach. By accepting CCMT 09T3 indexable inserts, the system separates cutting edge performance from the tool body: worn cutting edges are replaced quickly while the holder remains in use. This approach reduces per-hole cost and supports continuous production where repeatability matters. The 56 mm maximum cutting diameter and 70 mm effective cutting length ensure compatibility with a wide range of internal machining tasks, offering a predictable process window for setup and programming. Faster cycle times and lower operating costs Interchangeable carbide inserts provide the primary economic benefit: reduced regrind cycles, simplified inventory of cutting edges and minimal downtime for tool reconditioning. The indexable format used by this boring bar enables quick insert indexing or replacement, which can shorten maintenance intervals and maintain cutting performance during long runs. For operational planners, the combination of insert availability and a robust holder means fewer full-tool changes and improved machine uptime without sacrificing bore quality or surface finish. Stable support and reliable machining performance A compact overall length of 130 mm and a mass of 1.035 kg contribute to the holder's stability in the toolpost or turret, reducing vibration and improving surface integrity. The substantial shank diameter enhances clamping stiffness, which is especially beneficial when machining harder or interrupted cuts. The construction supports steady tool life for the insert and consistent dimensional results. Where process reliability and predictable tolerances are required, the tool’s geometry and mass distribution assist in holding form and concentricity throughout production batches. Discuss application requirements with Metav Werkzeuge for a tailored recommendation on the Teknik Makina TKB118TM and compatibility with existing insert stocks — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TKB118TM Manufacturer: Teknik Makina Name: Ausbohrwerkzeug Facts Max cutting diameter: 56 mm Shank diameter: 32 mm Cutting length: 70 mm Overall length: 130 mm Weight: 1.035 kg Nominal diameter: 45 Special features Compatible inserts: CCMT 09T3 Indexable insert system Designed for internal boring and finishing FAQ What inserts fit this boring bar? The boring bar accepts CCMT 09T3 indexable carbide inserts, enabling quick edge changes and cost-effective resharpening cycles. What is the maximum cutting diameter? The Ausbohrwerkzeug TKB118TM is specified for a maximum cutting diameter of 56 mm. How long is the effective cutting reach? The tool provides a cutting length of 70 mm, suitable for deeper bore operations where extended reach is required. What shank diameter ensures clamping rigidity? A 32 mm shank diameter gives the holder high rigidity for stable internal machining and improved surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining compatibility with CCMT 09T3 indexable inserts, a sturdy 45 mm shank and a 90 mm maximum cutting diameter, this boring tool delivers efficient, repeatable machining for medium‑diameter bores; order directly via Metav Werkzeuge or consult their specialists for selection and setup assistance. Boring Tool for CCMT 09T3 Indexable Inserts — 45 mm Ø, 182 mm Length (Teknik Makina) The boring tool for CCMT 09T3 indexable inserts is designed for precise internal and external boring in turning applications, optimised for stable clamping and quick insert changes 45 mm shank for stable clamping Compatible with CCMT 09T3 inserts Up to 90 mm cutting diameter Compact overall length 182 mm Precision and throughput for medium‑diameter bores The boring tool accepts CCMT 09T3 indexable inserts and is dimensioned to support consistent bore production across short to medium runs. A 45 mm shank provides a rigid interface with the holder, reducing deflection during cutting, while the 90 mm maximum cutting diameter expands the operational range without the need for multiple setups. With an overall length of 182 mm and a mass suited to robust machining (weight 2.168 kg), the design promotes repeatable process parameters and predictable cycle times, enabling planners to specify feeds and speeds with confidence. Stable clamping reduces vibration and extends service intervals A toolholder and bar that transfer forces effectively into the machine spindle yield measurable improvements in surface finish and component conformity. This configuration improves tool life by lowering chatter and peak loads on insert corners; combined with quick, indexable inserts, it minimises downtime for grade changes. The option to select carbide grades for roughing or finishing within the CCMT family makes the system adaptable to varying workpiece materials and order sizes, helping production managers balance cost per part against finish requirements. Straightforward integration into the production line Classification data and clear dimensional specifications simplify procurement and fixture design: measurements for shank diameter, cutting diameter and cutting height are supplied for immediate use in CAM setups and jigs. As part of a machine shop’s tooling kit, the unit supports efficient workflows by reducing set‑up complexity and streamlining insert logistics. For operations seeking reliable, economical boring performance, the combination of solid mechanical design and indexable inserts technology offers a pragmatic route to steadier output and lower per‑part tooling costs. For procurement and technical matching of Teknik Makina boring tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed advice and supply coordination Technical Data SKU: TKB181TM Label: 45mm Ausbohrwerkzeug CCMT 09T3 L182mm Manufacturer: Teknik Makina Dimensions & weight Shank diameter: 45 mm Overall length: 182 mm Max cutting diameter: 90 mm Cutting height: 60 mm Weight: 2.168 kg Features & classification Compatible inserts: CCMT 09T3 Product type: Boring tool eClass: 21181208 FAQ Which indexable inserts are required? The tool uses CCMT 09T3 indexable inserts; the system is designed for quick insert changes to suit roughing or finishing operations with SKU TKB181TM from Teknik Makina. What is the maximum cutting diameter achievable? Maximum cutting diameter is 90 mm, enabling bore work in the medium diameter range without additional tooling stages. What are the shank and overall length dimensions? Shank diameter is 45 mm and overall length is 182 mm, information that assists in holder selection and fixture planning. Is the tool suited for internal and external boring? The geometry and dimensions support typical internal and external boring tasks in turning setups, offering stable clamping and predictable cutting behaviour. How heavy is the tool and what does that imply for handling? Weight is 2.168 kg; the mass contributes to stability during cutting and should be considered when selecting toolholders and balancing assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a genuine Teknik Makina cartridge that ensures correct seating for CCMT 09T3 inserts and precise compatibility with boring tools in the 45–56 mm range; this reduces changeover uncertainty and helps maintain production continuity. Order the cartridge directly via Metav Werkzeuge or consult the technical team for application advice. Cartridge for Boring Tool 45–56 CCMT 09T3 — Teknik Makina replacement module with CCMT insert fit The Cartridge for Boring Tool 45–56 CCMT 09T3 is a replacement cartridge designed to accept CCMT 09T3 inserts and to integrate with 45–56 mm boring toolholders for turning and milling support. Compatible with CCMT 09T3 inserts Fits boring tool 45–56 mm range Genuine Teknik Makina component Secure fit and proven compatibility for uninterrupted production A correctly matched cartridge reduces the risk of incorrect insert seating and vibration-related issues. The unit is designed around the CCMT 09T3 insert geometry to provide stable seating and repeatable positioning, which is essential for consistent cutting performance. For procurement and inventory management, compatibility with the 45–56 mm tool range simplifies stocking, lowering administrative complexity while supporting stable production runs. Emphasis on a genuine manufacturer part means fitting tolerances and interface geometry align with the original toolholder design, supporting predictable tool life and process stability. Practical benefits at the toolholder level Replacing a worn or damaged module with a genuine cartridge restores the original interface geometry and helps to avoid compensatory adjustments during setup. The cartridge supports quick replacement routines that can reduce cumulative machine downtime during tool change operations. In practice, this translates to fewer interruptions in machining sequences and more reliable dimensional results from the initial cuts. Where process repeatability matters, a dedicated replacement part matched to the insert designation contributes directly to operational efficiency and reduced rework. Easy maintenance and clearer stock decisions Using a branded cartridge from Teknik Makina makes maintenance cycles more straightforward: spare identification, ordering, and storage rely on established part identifiers rather than improvised substitutions. Clear labelling and the SKU KR106TM enable traceable procurement and easier replenishment planning. For buyers and workshop managers seeking to streamline vendor relations, keeping a single, manufacturer-specific replacement item for the 45–56 mm tool family reduces the variety of spare parts required and simplifies staff training on correct replacement procedures. Confidence through supplier partnership and quality assurance Sourcing components via an experienced distributor ensures parts arrive verified and ready for installation. Metav’s role as a precision partner offers a reliable supply channel and technical consultancy for selection and compatibility checks. That background, combined with a proven manufacturer part, supports both immediate operational needs and longer-term process reliability. Opting for original replacement cartridges helps protect machining integrity and fosters predictable outcomes across diverse turning and boring tasks. Contact Metav Werkzeuge for availability of the Teknik Makina cartridge KR106TM and for application guidance tailored to the intended boring tool 45–56 CCMT 09T3 setup — technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: KR106TM Part name: Cartridge (Kartusche) Designation: for Boring Tool 45-56 CCMT 09T3 Manufacturer: Teknik Makina Core specifications Bore range compatibility: 45–56 mm Insert designation: CCMT 09T3 Special features Replacement cartridge for boring toolholders Genuine Teknik Makina component SKU for ordering: KR106TM FAQ Is this cartridge compatible with CCMT 09T3 inserts only? The cartridge is specified for use with CCMT 09T3 inserts and the interface is designed to accept that insert geometry for the 45–56 mm tool range. Which boring tool range does this module fit? Compatibility is stated for boring tools sized 45–56 mm, matching common toolholder families that accept CCMT 09T3 inserts. What is the manufacturer of the cartridge KR106TM? The cartridge is a Teknik Makina component, listed under SKU KR106TM for clear identification and procurement. Can the cartridge restore original toolholder performance? Replacing a worn module with this genuine cartridge reinstates the designed seating geometry for inserts, supporting repeatable cutting performance and assembly fit. How should the part be ordered for workshops in Europe? Order via Metav Werkzeuge using the SKU KR106TM; the distributor can confirm availability and dispatch details. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, indexable-insert solution that combines 45 mm cutting diameter and a 40 mm shank for stable drilling and fewer tool changes; order directly via Metav Werkzeuge or consult our technical team for application advice. Drill bar S40T STIR (STI for IR/ER Indexable Inserts) – 45 mm diameter, 300 mm overall length (Teknik Makina) The S40T STIR drill bar is a right-hand indexable-insert holder engineered for IR/ER 22 inserts, intended for precision hole-making and production drilling in workshop and industrial environments *For IR/ER 22 indexable inserts *45 mm cutting diameter *300 mm overall length, 40 mm shank *Right-hand orientation, robust 60 mm cutting height Reliable indexable-insert performance for production drilling The S40T STIR is designed to accept IR/ER 22 indexable inserts, providing a practical balance between cutting capacity and tool economy. Using indexable inserts reduces downtime for resharpening and keeps inventory manageable while maintaining consistent hole quality. The 45 mm cutting diameter and 60 mm cutting height allow for stable engagement in through-holes and interrupted cuts, and the right-hand configuration matches standard spindle rotations in most machining centres. This configuration translates to measurable improvements in cycle stability and fewer unscheduled tool changes, supporting higher throughput in repetitive drilling tasks. Stiff shank design that improves hole accuracy A solid 40 mm shank delivers rigidity where it matters: at the tool-to-spindle interface. Increased rigidity minimises deflection under load, which directly benefits positional accuracy and surface finish in bores. The 300 mm overall length gives reach without excessive overhang, reducing vibration risk in deep-hole applications. For workshops without specialist toolholders, the standard shank diameter simplifies mounting and promotes repeatable clamping values, which means fewer scrap parts and faster setup times on the shopfloor. Compatibility and operational clarity for engineers and buyers Compatibility with the common 22 IR insert size simplifies tooling decisions across milling and turning centres; the holder’s ISO designation S40T STIR clarifies its role in established tooling systems. Specifying a single holder type for a range of components reduces tool-change complexity and allows production planners to forecast insert consumption more accurately. The indexable-insert approach preserves cutting-edge geometry without altering the holder, so maintenance is limited to insert replacement rather than complete tool refurbishment, lowering total lifecycle effort. Robustness and workshop suitability With a mass of 2.831 kg, the holder indicates substantial build quality while remaining manageable for manual handling during tool changes. Its construction is optimised for frequent use in industrial environments rather than occasional hobby tasks; the rigidity and geometry balance sustained cutting forces and thermal loads to maintain consistent performance. For operations requiring dependable repeatability and simplified inventory, this indexable-insert drill bar offers a pragmatic solution that supports workflow continuity and reduces the need for multiple specialist tools. For tailored application advice or to secure reliable delivery from Emmerich, contact Metav Werkzeuge for a consultation on integrating the S40T STIR into existing processes—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K360-1TM Manufacturer: Teknik Makina ISO designation: S40T STIR Numbers / Core Technical Data Cutting diameter: 45 mm Shank diameter: 40 mm Overall length: 300 mm Cutting height: 60 mm Weight: 2.831 kg Cutting direction: right Designs / Special features STI for IR/ER indexable inserts Compatible with 22 IR indexable inserts Right-hand orientation SKU: K360-1TM FAQ Which insert type fits this holder? The holder is compatible with IR/ER 22 indexable inserts; the S40T STIR accepts STI-style insert seats designed for that insert size. What are the key dimensions to check for toolholder compatibility? Check the 45 mm cutting diameter, 40 mm shank diameter and 300 mm overall length to ensure correct clearance and clamping in the machine spindle and toolholder. Is the shank size suitable for standard toolholders? The 40 mm shank is a common industrial size that fits many conventional toolholder systems and ensures a rigid connection for improved bore accuracy. Can this holder be used for interrupted cuts or tough materials? The geometry and 60 mm cutting height support interrupted cuts, while indexable inserts can be selected specifically for tougher materials; insert specification should match the intended workpiece. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure ISO 25-22 interface and the 154 mm overall length to improve tool stability and reach in milling operations; the robust mass of 3.776 kg adds rigidity for repeatable results. Order the holder directly via Metav Werkzeuge or consult our specialists for compatibility checks. Fräseraufnahme ISO 25-22 – Teknik Makina tool holder with ISO 25-22 interface and 154 mm length The Fräseraufnahme ISO 25-22 is a precision tool holder engineered for secure clamping of milling cutters in ISO 25 spindle systems, offering extended reach and enhanced rigidity for CNC and conventional milling tasks. ISO 25-22 interface for secure connection 154 mm overall length for deep-reach work Solid mass 3.776 kg for improved stability Reliable clamping for consistent component quality A well‑executed clamping solution reduces vibration and improves surface finish; the ISO 25-22 interface on this holder provides a standardised connection that ensures repeatable seating and torque transmission. By combining a standard interface with notable mass, the design promotes stability during cutting, which lowers the risk of chatter and dimensional drift. As a result, throughput improves and scrap rates fall, a direct operational advantage for production environments seeking predictable part quality. Extended reach without sacrificing rigidity The 154 mm overall length is aimed at operations that require additional reach, such as step milling, deep pocketing or tooling across large workpieces. Increased reach often compromises stiffness, but the holder’s mass contributes to rigidity, maintaining cutting geometry and tool life. For engineers evaluating fixture and tool stacks, the clear numerical specification of length makes layout and collision checks straightforward during CAM setup and machine programming. Straightforward integration into workshop set-ups Built for compatibility with ISO 25 tooling systems, this tool holder is suitable for standard CNC tool magazines and manual tool changes alike. Technical identification is provided by SKU M302TM, and the holder is manufactured by Teknik Makina, which supports consistency across batches. For detailed machine-matching or spindle-interface questions, Metav Werkzeuge can provide clarifications by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm fitment and delivery options. Practical advantages for production planning Selecting a standardised holder reduces the variety of adapters and collets required on the shop floor, simplifying inventory and changeover processes. The combination of a common ISO interface and measurable dimensions enables planners to calculate tool reach and clearance precisely, aiding in faster set-up times and fewer trial runs. Where repeatability and predictable tool behaviour matter, the specification-driven approach supports efficient, low‑risk production ramps. Discuss the Teknik Makina ISO 25-22 tool holder with Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data Article number: M302TM Product: Fräseraufnahme (tool holder) Model designation: ISO 25-22 Manufacturer: Teknik Makina Dimensions & weight Overall length: 154 mm Shank / clamping diameter: 45 mm Weight: 3.776 kg Features & compatibility Compatible with ISO 25 spindle/tool systems Intended for milling cutter clamping Label: Fräseraufnahme ISO 25-22 SKU: M302TM FAQ What spindle interface does the holder use? The holder uses the ISO 25-22 interface; the specification ensures compatibility with ISO 25 tooling systems for standardised clamping. Is this product suitable for deep‑reach milling? Yes, the 154 mm overall length is designed to provide additional reach while the mass helps retain rigidity during machining. Which manufacturer produces this tool holder? This holder is manufactured by Teknik Makina and is supplied under SKU M302TM. How does the holder improve machining stability? The combined effect of the standard ISO 25-22 interface and the holder’s mass (3.776 kg) increases damping and reduces vibration, resulting in better surface finish and more consistent dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable solution that combines stable engagement and straightforward maintenance: a 45 mm cutting diameter with 4 flutes and a 75° cutting angle provides consistent material removal, while the 25 mm shank and precise Torx clamping enable rapid insert changes and reliable seating—order directly via Metav Werkzeuge or request application advice from our technical team. Shaft milling cutter S348TM – Indexable insert milling cutter, Ø45 mm, 4 flutes (Teknik Makina) Shaft milling cutter S348TM designed for heavy-duty indexable insert milling with APKT 1003 style inserts, suited to versatile milling applications where stable engagement and fast insert replacement are priorities Ø45 mm cutting diameter for high stock removal Compatible with APKT 1003 indexable inserts (Korloy) 75° cutting angle for secure cutting engagement Secure clamping via M2.5x5.5 Torx screw, T8 key Increase throughput with a stable 75° cutting geometry The S348TM is engineered to keep cutting forces predictable: the 75° cutting angle reduces radial shock and promotes steady chip formation, while the 4 flutes provide a balanced distribution of cutting load. With a Ø45 mm cutting diameter and a 35 mm effective cutting length, the tool achieves higher material removal rates with fewer vibrations compared with less optimised geometries. This translates into shorter cycle times and reduced need for secondary passes, supporting more efficient production planning and machine utilisation. Quick setup and reliable insert system for minimal downtime Designed for indexable-insert workflows, the cutter accepts APKT 1003 inserts and uses a Torx clamping screw M2.5x5.5 tightened with a T8 key for positive, repeatable seating. The 25 mm shank and 100 mm overall length ensure secure mounting in standard toolholders while keeping the assembly compact for operator handling. The modular insert system means worn cutting edges are replaced in seconds, improving uptime and simplifying tool inventory management for maintenance teams. Robust geometry that supports consistent machining results Although lightweight at 0.535 kg, the tool’s geometry and flute configuration have been optimised for balance and steady engagement across a range of milling operations. The tool’s 35 mm cutting length provides a good compromise between reach and rigidity, making it suitable for shoulder milling and light profiling without unnecessary overhang. The combination of precise clamp hardware and engineered cutter body produces reproducible results job after job, helping to maintain surface quality and dimensional stability on recurring production runs. Contact Metav Werkzeuge for availability of the Teknik Cutting Tools S348TM shaft milling cutter and for tailored recommendations on insert selection and toolholder setup Technical data SKU: S348TM Eclass: 21180806 ETIM: EC011860 Facts Cutting diameter: 45 mm Number of cutting edges: 4 Shank diameter: 25 mm Cutting length: 35 mm Overall length: 100 mm Weight: 0.535 kg Special features Compatible inserts: APKT 1003 (Korloy) Cutting angle: 75° Torx screw: M2.5x5.5 Torx key size: T8 FAQ Which indexable inserts fit this cutter? The S348TM accepts APKT 1003 indexable inserts; Korloy-compatible grades are commonly used with this cutter. What are the key dimensions to check for toolholder compatibility? Check the 25 mm shank diameter and the 100 mm overall length when selecting a collet or holder for the S348TM to ensure secure clamping and sufficient rigidity. Which screw and key are required for insert clamping? Insert clamping is performed with a M2.5x5.5 Torx screw using a T8 Torx key, ensuring consistent and repeatable seating of the insert. How long is the effective cutting edge and what does that mean for reach? The S348TM offers a 35 mm cutting length, providing a balance between reach and rigidity suitable for shoulder milling and moderate-depth passes. Is the cutter suitable for heavy removal operations? The cutter’s Ø45 mm diameter and 4-flute layout support effective stock removal; correct cutting data and secure clamping are essential for heavy cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine a sturdy 25 mm shank and a 45 mm cutting diameter with three cutting edges for stable, efficient milling; order the shank milling cutter S132TM directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter S132TM — indexable-insert cutter, 45 mm diameter (Teknik Makina) Shank milling cutter S132TM is a robust indexable-insert milling tool designed for precision machining with TPKN 1103–2204 inserts in CNC and milling setups Compatible with TPKN 1103–2204 inserts 45 mm cutting diameter Shank diameter 25 mm Stable mounting and predictable machining accuracy The 25 mm shank and balanced geometry ensure a secure clamping interface that reduces vibration during cutting. A stable holder dimension combined with the 45 mm outside diameter provides consistent engagement with the workpiece, which translates into repeatable surface quality and extended insert life. For production environments where cycle-time consistency matters, the tool’s design reduces the need for frequent re‑measuring and corrective passes, helping to keep machining tolerances tight. Quick insert changes and straightforward upkeep Indexable inserts are replaced rather than regrinded, cutting downtime and per‑part cost. The S132TM secures inserts with an M6x17 fastening screw that is accessed using a 4 mm Allen key, allowing fast, tool‑based insert changes on the shop floor. The modular concept simplifies maintenance planning: a worn cutting edge is swapped in minutes, restoring cutting performance without the need for specialist grinding, so throughput is maintained and operational costs are reduced. Controlled cutting performance with three cutting edges Equipped with three cutting edges, the cutter delivers a balanced chip load per tooth and predictable material removal rates. The multi‑edge arrangement helps distribute cutting forces evenly, which supports higher feed rates at comparable surface finishes when set up correctly. In practice, this means fewer passes may be required to achieve the desired profile, improving overall machining efficiency while preserving insert geometry. Practical dimensions for machine compatibility and handling With an overall length of 120 mm and a cutting length of 45 mm, the tool suits a wide range of milling stations where reach and rigidity must be balanced. The tool’s weight of 0.606 kg is light enough for routine handling but substantial enough to assist dampening of minor spindle vibrations. Whether integrated into high‑speed cycles or shorter production runs, the cutter’s specifications favour straightforward tool management and predictable set‑up times. Contact Metav Werkzeuge today to discuss how the Teknik Makina S132TM can be integrated into current tooling strategies and to arrange delivery from Emmerich — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: S132TM Manufacturer: Teknik Makina For inserts: TPKN 1103–2204 Indexable Inserts Weight: 0.606 kg Core data Diameter: 45 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Cutting edges: 3 Special features Fastening screw: M6x17 Tool for fastening: 4 mm Allen key Indexable insert compatibility: TPKN 1103–2204 FAQ Which inserts fit this cutter? The S132TM is designed for use with TPKN 1103–2204 indexable inserts and secures them reliably for repeatable cutting conditions. What is the shank size and why does it matter? The tool has a 25 mm shank, which provides a robust clamping interface for reduced vibration and improved surface finish during milling operations. How many cutting edges does the tool have? This cutter uses three cutting edges, offering balanced tooth load and steady material removal rates. What fastening hardware is required for insert changes? Insert retention uses an M6x17 screw and is adjusted with a 4 mm Allen key for quick, tool‑assisted replacement. What are the overall dimensions and weight? Overall length is 120 mm, cutting length 45 mm, and weight 0.606 kg, delivering a good balance of reach and rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 40 mm shank and a substantial 60 mm cutting height for stable, heavy‑duty internal turning; the SIL S40T design ensures reliable compatibility with 16 ER indexable inserts and fast changeovers. Order the tool via Metav Werkzeuge or consult Metav's specialists for application advice. Boring bar SIL S40T by Teknik Cutting Tools — 40 mm shank, left‑hand A SIL S40T boring bar designed for left‑hand internal turning with 16 ER indexable inserts, suitable for CNC lathes and precision workshop applications SIL S40T design for 16 ER inserts 40 mm shank for rigid clamping 60 mm cutting height for deep cuts Left‑hand cutting direction Stable clamping for improved surface finish and tool life The combination of a 40 mm shank and a robust construction delivers reduced vibration and greater rigidity during internal turning, which directly benefits surface finish and cutter life. With a 300 mm overall length and a mass of 2.839 kg, this tool balances reach and stability for medium‑depth boring operations. Operators and process planners will notice fewer reworks and more consistent cycle times when a rigid bar is used instead of undersized alternatives. Fast insert changes and predictable cutting performance Engineered specifically for 16 ER indexable inserts, the SIL geometry simplifies insert seating and repeatability, shortening downtime at tool change. The 60 mm cutting height provides a deep, secure insert pocket for heavy cuts and chip control, enabling efficient material removal rates without compromising safety. This configuration supports standard ER16 clamping arrangements and integrates smoothly into existing toolholding systems. Left‑hand orientation for tailored turning strategies A left‑hand cutting direction suits specific machining setups and complements toolpaths where reverse orientation improves chip flow or access. The left feed orientation, combined with the tool’s geometry, allows reliable engagement in internal boring tasks on CNC lathes and turning centres. The design is particularly useful when machining features that require a left‑hand approach to meet fixture or lathe‑axis constraints. Order the Teknik Cutting Tools SIL S40T boring bar (SKU K333TM) through Metav Werkzeuge for reliable supply and application guidance — Metav's specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to discuss machine compatibility and setup Technical data Article number: K333TM Manufacturer: Teknik Cutting Tools Model designation: SIL S40T Description: SIL for 16-22ER Indexable Inserts Dimensions & mass Shank diameter: 40 mm Diameter: 45 mm Cutting height: 60 mm Overall length: 300 mm Weight: 2.839 kg Cutting direction: left Compatibility & features Compatible inserts: 16 ER Collet/holder designation: ER16 Suitable for indexable insert boring For CNC/lathes internal turning FAQ Which indexable inserts fit this tool? The SIL S40T boring bar from Teknik Cutting Tools is specified for 16 ER indexable inserts and is designed to accommodate the seating and clamping geometry typical for that size. What are the key mounting dimensions? Relevant dimensions are a 40 mm shank diameter, 45 mm diameter, 300 mm overall length and 60 mm cutting height, which determine clamping and reach requirements for the machine setup. Is the cutting direction important for setup? Yes; the tool is manufactured for left‑hand cutting and should be used in operations and toolpaths that call for left‑hand engagement to ensure correct chip evacuation and cutting forces. Which toolholders are compatible? The bar is compatible with ER16 clamping systems and integrates into standard ER16 collet holders and corresponding tool posts on lathes and machining centres. Can the tool be used on CNC lathes for medium‑duty production? Yes; the SIL S40T boring bar is built for CNC and lathe internal turning in production environments where a rigid shank and reliable insert seating are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The robust combination of a 45 mm cutting diameter, a 135 mm cutting length and a stout 40 mm shank ensures stable drilling performance and predictable tool life; order the drill directly via Metav Werkzeuge or contact our consultants for application advice. Indexable drill body (Vollbohrer) – Ø 45 mm, 40 mm shank – Teknik Makina An indexable drill body designed for medium‑to‑heavy duty drilling where replaceable Korloy inserts reduce downtime and running costs 45 mm cutting diameter 135 mm cutting length 40 mm shank diameter Compatible with Korloy WCM‑06T3 inserts Precision and stability for reliable holemaking The heavy‑duty drill body delivers consistent hole quality through a combination of a wide 45 mm diameter and a substantial 40 mm shank, which together reduce run‑out and increase clamping rigidity. For production environments where repeatability matters, the instrumented geometry supports steady cutting conditions and predictable results. The solid overall length of 247 mm and the specified cutting length of 135 mm permit deep machining without frequent tool changes, while the tool mass of 2.238 kg contributes to vibration damping during engagement. These characteristics translate into stable cycle times and fewer scrap parts in batch production. Economic advantage through indexable inserts By accepting WCM‑06T3 indexable inserts from Korloy, the drill body minimises tooling expenditure and maintenance time. Worn inserts are exchanged rapidly without removing the entire drill from the spindle, reducing machine downtime and inventory of complete tools. The insert system also enables tailored edge geometry choices to match process requirements, improving material removal rates or surface finish as required. This approach supports a clear cost‑benefit logic: replacement of small inserts rather than whole drills keeps running costs down while maintaining high cutting performance. Integration and setup benefits for workshop workflows The drill’s 40 mm shank diameter and 68 mm specified attachment length simplify clamping into standard holders and reduce the need for special adaptors. The overall tool geometry is designed for straightforward installation and predictable balancing, making it suitable for conventional spindles and many CNC toolholders found in machine shops. Compatibility notes such as the accepted Korloy WCM‑06T3 insert type are explicitly stated to support rapid procurement and correct tool setup. Technical continuity from cutting length through to shank dimensions aids process planning and tool management in serial production. Choose the Teknik Makina indexable drill body via Metav Werkzeuge for dependable supply and application support — contact Metav Werkzeuge’s specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored machining advice Technical data Article number: U194TM Manufacturer: Teknik Makina Product: Indexable drill body (translated name) Core dimensions Diameter: 45 mm Cutting length: 135 mm Shank diameter: 40 mm Shank attachment length: 68 mm Overall length: 247 mm Weight: 2.238 kg Compatibility & features Compatible inserts: WCM‑06T3 Compatible insert manufacturer: Korloy FAQ What insert type fits this drill body? The drill body accepts Korloy WCM‑06T3 indexable inserts; this specification is supplied with the Teknik Makina U194TM item. What are the key dimensions to check before ordering? Verify the 45 mm cutting diameter, 40 mm shank diameter and the 247 mm overall length to ensure correct holder fit and required drilling depth. Is the tool suitable for deep hole drilling in production? With a 135 mm cutting length and a robust shank, the design of the Teknik Makina indexable drill body supports deeper holes with improved stability compared with shorter instruments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise fitment and simple maintenance: the 45 mm diameter and compatibility with MGMN 300 indexable inserts ensure efficient T-slot production, while the M16 mounting and 25 mm shank deliver stable clamping. Order the cutter directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. T-slot cutter for MGMN 300 indexable inserts — 45 mm, L65 mm (Teknik Makina) The T-slot cutter for MGMN 300 indexable inserts is engineered for straightforward T-slot milling in CNC machining centres and milling machines, offering reliable insert change and consistent slot geometry. 45 mm diameter for wide T-slots Compatible with MGMN 300 indexable inserts M16 mounting thread for secure attachment 25 mm shank for stable clamping Durable design for consistent slot profiles The cutter has been developed to provide repeatable slot geometry with minimal setup time. The combination of a 45 mm cutting diameter and 2 cutting edges results in balanced cutting forces that reduce vibration during machining. Because the tool accepts MGMN 300 indexable inserts, individual cutting edges can be replaced quickly, which lowers consumable costs compared with solid tools. The 25 mm shank and M16 thread give a secure connection to standard holders, ensuring the cutter is held rigidly and that concentricity is maintained across the full L65 mm overall length. Practical compatibility and maintenance benefits Compatibility with Korloy inserts and a standard indexable-insert system simplifies stock management in the workshop. Insert changes are performed with common tools and do not require specialist fixtures; a 6 mm Allen key is specified for clamping and unclamping. This modular approach means that downtime is limited to insert replacement rather than full-tool reconditioning, promoting higher availability on production lines. The cutter’s modest mass (approximately 0.142 kg) contributes to reduced spindle load while maintaining the stiffness needed for accurate slot milling. Integration into production workflows Installation and tool handling are straightforward: the tool is mounted via its M16 thread and secured in either a dedicated holder or an appropriate adapter; the 25 mm shank dimension is compatible with common clamping systems. For workshops that prioritise predictable cycle times, the replaceable-insert concept allows maintenance to be scheduled without interrupting machine availability. Technical documentation and clear labelling support inventory control and traceability, making the tool a pragmatic choice for OEMs and subcontractors who require dependable T-slot milling components. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Makina T-slot cutter TKC284TM from our Emmerich stock Technical Data SKU: TKC284TM Description: 45mm T-slot cutter MGMN 300 L65mm Product type: T-slot cutter Manufacturer: Teknik Makina Core dimensions Diameter: 45 mm Overall length: 65 mm Shank diameter: 25 mm Cutting edges: 2 Cutting height: 3 mm Weight: 0.142 kg Thread: M16 Compatibility & features For MGMN 300 indexable inserts Compatible insert manufacturer: Korloy Allen key: 6 mm FAQ Which inserts fit this cutter? The cutter accepts MGMN 300 indexable inserts; Korloy inserts that conform to the MGMN 300 geometry are suitable. How is the tool mounted in the holder? Mounting is via the M16 threaded connection and the 25 mm shank is clamped in a standard holder or adapter for secure radial support. What tools are required for insert changes? Insert clamping and removal are carried out with a 6 mm Allen key supplied or commonly available in workshops. Can this cutter be used on standard CNC milling machines? Yes, the cutter is designed for integration in CNC machining centres and conventional milling machines using appropriate holders. How does the replaceable-insert concept benefit production? Replaceable inserts reduce downtime and consumable cost because individual cutting edges are changed instead of replacing the entire tool body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable, large-diameter insert drill that combines proven insert compatibility with a long cutting reach for efficient deep-hole machining; order directly via Metav Werkzeuge or request technical advice for machine pairing. Indexable drill U196TM – Ø 46 mm, 138 mm cutting length (Teknik Cutting Tools) Indexable drill U196TM designed for demanding large-diameter drilling tasks with insert compatibility for industrial production Indexable design for Korloy WCM-0804 inserts Ø 46 mm for large-diameter drilling Cutting length 138 mm for deep holes Robust 40 mm shank for secure clamping Stable large-diameter performance for reliable holemaking The indexable drilling tool is engineered to deliver consistent results when machining larger bores. With a nominal Ø 46 mm diameter and 138 mm cutting length, the tool provides an extended engagement zone that reduces the need for multiple passes. Users benefit from a predictable cutting process and improved cycle-time planning due to the tool’s geometry, which supports controlled chip evacuation and steady feed rates. This focus on measurable performance helps maintain part tolerances and reduces rework. Insert compatibility that supports fast tool changes and low running costs Compatibility with Korloy WCM-0804 inserts means quick blade replacement and straightforward reconditioning of cutting edges. The insert-based concept reduces downtime compared with regrinding solid cutters and keeps consumable costs transparent. For workshops transitioning to indexable systems, the result is a clearer cost-per-hole calculation and simplified inventory: spare inserts replace the need for frequent tool reconditioning while preserving edge geometry and repeatability across batches. Secure mounting and rigid setup for repeatable accuracy A substantial shank Ø 40 mm and an overall length of 251 mm provide the stiffness required for stable clamping and reduced vibration during cutting. The combination of a well-dimensioned shank and a shank length of 68 mm simplifies toolholder selection and improves concentricity, which is crucial when producing tight-tolerance holes. The tool’s mass (approx. 2.276 kg) also contributes to damping, helping to protect cutting edges and maintain dimensional accuracy over longer runs. Practical fit for production workshops and machining centres This insert drill is suitable for industrial settings where larger bore diameters are needed reliably and repeatedly. The tool’s design favours quick set-up changes, predictable maintenance cycles and a straightforward replacement strategy based on WCM-0804 inserts. For procurement and planning departments, the clear compatibility with Korloy inserts and the robust mechanical design support better lead-time forecasting and sustained throughput when integrated into a standardised tooling set-up. For robust large-diameter drilling choose Teknik Cutting Tools’ indexable solution and contact Metav Werkzeuge for personalised machine pairing and supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: U196TM Manufacturer: Teknik Makina Diameter: 46 mm Cutting length: 138 mm Overall length: 251 mm Shank diameter: 40 mm Shank length: 68 mm Weight: 2.276 kg Compatible insert: WCM-0804 Compatible insert maker: Korloy Product type: Indexable drill Brand: Teknik Cutting Tools FAQ What is the nominal diameter and cutting reach of this tool? The indexable drill U196TM has a nominal diameter of 46 mm and a cutting length of 138 mm, providing an extended reach for deep-hole operations. Which inserts are required for the U196TM? This tool is designed for Korloy WCM-0804 inserts; using the specified insert type ensures correct seating and expected cutting performance. Which shank size is required for secure clamping? The U196TM features a shank diameter of 40 mm and a shank length of 68 mm, suitable for rigid toolholder connections common in machining centres. Is the U196TM intended for high-volume production? Yes, the insert-based concept of the U196TM supports rapid insert changes and predictable maintenance, making it appropriate for sustained production runs. How does the tool support dimensional repeatability? A combination of a robust shank, precise insert seating and controlled geometry reduces runout and vibration, contributing to consistent hole quality across batches. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise clamping, stable 40 mm shank and compatibility with Korloy 4C MGM inserts to maintain consistent groove quality in series production. Order the grooving clamping holder directly via Metav Werkzeuge or ask the technical consultants for application-specific advice. Stechklemmhalter K616TM – Grooving clamping holder with 4 mm cutting width (Teknik Makina) The Stechklemmhalter is a robust grooving clamping holder for CNC turning applications, designed to accept 4C MGM inserts and to provide rigid support for precision parting and grooving operations. Solid 40 mm shank for stable clamping Compatible with Korloy 4C MGM inserts Cutting width 4 mm for precise grooving Overall length 300 mm for deep turning operations Maximum stability for repeatable grooves and reduced vibration The holder is engineered around a 40 mm shank and a substantial Ø47 mm body, which together increase stiffness at the tool tip and reduce chatter under load. This rigidity translates into consistent groove geometry and predictable tool life when machining repeat batches. The design also contributes to safer set‑up on CNC lathes, as the mass distribution and the weight of 2.942 kg damp vibrations that would otherwise affect surface finish. For manufacturers seeking measurable improvements in process stability, the combination of shank diameter and overall mass offers a clear productivity advantage. Fast insert mounting and proven insert compatibility to cut set‑up time Fitted for the MGM clamping system and the ISO bar designation S40T 4C‑R, the holder accepts Korloy 4C MGM inserts, enabling quick replacement and secure clamping without additional adaptors. The 4 mm cutting width and 60 mm cutting height are optimised for narrow grooving and parting tasks, allowing accurate control of chip formation and groove dimensions. The straightforward interface between holder and insert reduces set‑up time and limits the need for repeated adjustments, which supports higher uptime and a faster route to production readiness. Built for deeper turning tasks while maintaining precision With an overall length of 300 mm, the tool is suitable for operations that require reach beyond short overhangs, while the geometry of the clamping block keeps the cutting edge firmly located. The bar designation S40T 4C‑R indicates a standardised shank form for integration into existing toolposts and turret systems, simplifying implementation on the shop floor. The holder’s balance of length and stiffness helps to preserve dimensional accuracy in groove depth and wall straightness, making it a reliable choice for both repeat manufacturing and prototyping runs where groove integrity matters. Contact Metav Werkzeuge for a tailored recommendation on Teknik Cutting Tools' grooving clamping holder K616TM — technical advice and order support available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K616TM Manufacturer: Teknik Makina Product: Stechklemmhalter Compatible inserts: Korloy 4C MGM Facts Shaft diameter: 40 mm Overall length: 300 mm Body diameter: 47 mm Cutting width: 4 mm Cutting height: 60 mm Weight: 2.942 kg Special features ISO designation: S40T 4C-R Clamping type: MGM Designed for grooving and parting applications Ready for use in CNC turning setups FAQ Which inserts fit this grooving clamping holder? The Stechklemmhalter K616TM accepts Korloy 4C MGM inserts via the MGM clamping system, ensuring secure seating and rapid index changes. What are the key dimensional features to check before ordering? Check the 40 mm shank diameter, 300 mm overall length and 4 mm cutting width to confirm compatibility with the lathe turret and the required groove dimensions. Is the holder suitable for extended overhangs? The 300 mm overall length provides extended reach for deeper turning operations while the substantial body diameter and mass help preserve stability and groove accuracy. How does the S40T 4C‑R designation affect mounting? The S40T 4C‑R designation denotes a standardised shank and bar form that aligns with common toolpost and turret interfaces, simplifying mechanical integration on compatible machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, long cutting reach and compatibility with standard Korloy inserts for reliable, repeatable holemaking; order directly via Metav Werkzeuge or ask our consultants for application advice. Indexable drill body U198TM — Ø 47 mm, long cutting reach, Teknik Makina The Indexable drill body U198TM is designed for industrial CNC drilling where insert-based cutting delivers fast material removal and straightforward maintenance *Indexable design for WCM-0804 inserts *Ø 47 mm nominal diameter *141 mm effective cutting length *Robust 40 mm shank for stable clamping High, predictable removal rates with insert-based cutting The U198TM is built for efficient holemaking: its Ø47 mm nominal diameter combined with a 141 mm cutting length offers an extended reach that supports deep-hole operations without frequent retooling. Using replaceable WCM-0804 inserts from Korloy means cutting edges are exchanged rather than reground, which reduces cumulative tool cost and keeps cycle times low. For machining planners this translates into measurable throughput gains and easier inventory management when standard inserts are stocked. Stable clamping for concentric holes and less rework A substantial 40 mm shank provides secure seating in heavy-duty toolholders, improving runout and repeatability during drilling cycles. The tool’s overall proportions — with a 68 mm shank engagement and a 254 mm total length — help maintain concentricity in deep cuts, lowering scrap rates and secondary finishing operations. Where hole tolerance and surface integrity matter, the tool body’s mass and geometry contribute to consistent results across batch runs. Simple upkeep and reduced production interruptions Because the design relies on indexable inserts, maintenance is quick: worn cutting edges are swapped in minutes, restoring cutting performance without lengthy downtime. The system lowers the requirement for resharpening logistics and extends the productive life of the tool body. For workshops aiming to balance uptime and cost control, an insert-based approach offers predictable tool consumption and straightforward spare-part planning. Reliable supply and partner support for production continuity Sourcing through Metav adds a further operational advantage: central European warehousing and procurement processes that streamline reorder cycles and reduce lead times. Metav’s catalogue breadth and quality filtering at the Emmerich location help ensure consistent tool availability, supported by long-term experience supplying industry and trade. This support is particularly useful when integrating the U198TM into a wider tooling strategy or when standardising inserts across multiple machines. For application-specific recommendations on the Teknik Makina indexable drill body U198TM and to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge GmbH in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on inserts, clamping and integration into existing toolholders Technical Data Article number: U198TM Manufacturer: Teknik Makina Data Nominal diameter: 47 mm Total length: 254 mm Cutting length: 141 mm Shank diameter: 40 mm Shank engagement length: 68 mm Weight: 1.919 kg Special features Compatible inserts: WCM-0804 Compatible insert manufacturer: Korloy Indexable insert drill body design FAQ Which inserts fit this drill body? The U198TM accepts WCM-0804 indexable inserts; Korloy inserts specified for that seat size are fully compatible with the Teknik Makina drill body. Can the tool be used in standard 40 mm holders? Yes, the U198TM features a 40 mm shank intended for secure clamping in standard straight-shank toolholders and adaptors. How does insert replacement affect uptime? Replacing indexable inserts on the U198TM restores cutting performance quickly, reducing machine downtime compared with regrinding solid tools. Is the U198TM suitable for deep-hole drilling applications? With a 141 mm cutting length and a total length of 254 mm, the U198TM is designed for extended-reach drilling where deeper holes are required while maintaining stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust clamping with a stable 40 mm shank and a precise 5 mm cutting width to ensure reliable parting and grooving operations; order this clamping parting toolholder via Metav Werkzeuge or consult the specialists for integration advice. Stechklemmhalter K622TM – Clamping parting toolholder with 40 mm shank and 5 mm cutting width (Teknik Makina) A Stechklemmhalter engineered for secure parting and grooving on lathes, compatible with Korloy 5C MGM indexable inserts and designed for straightforward integration into existing tool setups 40 mm shank for secure lathe clamping 5 mm cutting width for narrow parting cuts 60 mm cutting height for deep grooves Compatible with Korloy 5C MGM inserts Stable clamping for repeatable parting performance The holder is built around a robust 40 mm shank, which provides a solid interface with standard turret and toolpost fixtures. The shank designation S40T 5C-R describes the adopted mounting form and ensures consistent datum location when exchanged between stations. With a mass of 2.936 kg, the assembly dampens vibration during cut-off operations and helps to maintain tool position under load. This mechanical stability translates directly into tighter tolerances and extended insert life in high-repeat production runs. Narrow & deep cuts with predictable chip control Designed for narrow parting cuts, the 5 mm cutting width delivers accurate, material-efficient grooves while the 60 mm cutting height allows deeper engagements where required. The combination of these dimensions supports effective chip formation and evacuation when paired with compatible indexable tips. The toolholder’s 300 mm overall length and 47 mm diameter balance reach and rigidity, making it suitable for both short-run and batch turning where precise cross-section control is needed. Seamless compatibility and workshop efficiency Compatibility with Korloy 5C MGM indexable inserts and an MGM-style clamp simplifies insert procurement and changeover routines. The holder is identified by SKU K622TM and is sparingly designed to match common MGM clamping systems, so replacement inserts and clamp hardware from established suppliers fit without modification. This compatibility reduces machine downtime and supports lean tooling practices in metalworking and subcontract turning operations. Contact Metav Werkzeuge today for tailored tooling advice on this Teknik Makina clamping parting toolholder (SKU K622TM) and to arrange prompt supply from Emmerich for immediate workshop use Technical data Article number: K622TM Manufacturer: Teknik Makina Dimensions & weight Shank diameter: 40 mm Cutting width: 5 mm Cutting height: 60 mm Overall length: 300 mm Diameter: 47 mm Weight: 2.936 kg Compatibility & features Compatible with Korloy 5C MGM inserts Clamping type: MGM Shank designation: S40T 5C-R SKU: K622TM FAQ What lathe fittings are required for this toolholder? The Stechklemmhalter K622TM is specified with a 40 mm shank and S40T 5C-R designation; it is intended for turrets and toolposts that accept a 40 mm cylindrical shank. Which indexable inserts fit this holder? This clamping parting toolholder is compatible with Korloy 5C MGM indexable inserts; the MGM clamping form is supported to allow immediate use with standard Korloy tips. Is the holder suitable for deep-parting operations? With a 60 mm cutting height and a rigid 40 mm shank, the holder is designed to manage deeper groove and parting operations while maintaining stability. What is the overall length and how does that affect setup? The overall length is 300 mm, providing reach for various turning setups while preserving rigidity for consistent cutting conditions. Which SKU should be referenced when ordering or requesting technical data? Reference K622TM when enquiring about this Teknik Makina clamping parting toolholder to ensure correct identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable boring solution combining a compact 25 mm shank, a 64 mm cutting length and compatibility with CCMT 09T3 inserts to maintain production continuity and repeatable bore quality; order the boring tool directly via Metav Werkzeuge or ask our consultants if needed. Boring tool TKB112TM – Indexable internal boring bar, compatible with CCMT 09T3 Boring tool TKB112TM is engineered for precise internal machining and finishing operations where stable clamping and a long cutting reach are required Indexable CCMT 09T3 compatibility Ø 37 mm effective diameter 25 mm shank for secure clamping 64 mm cutting length for deep bores Stable internal boring for consistent bore results The TKB112TM is a purpose-built internal boring bar that combines a slender profile with measured rigidity to support accurate machining cycles. Its 25 mm shank is designed for secure fixture in standard toolholders, which reduces micro‑movement and helps preserve repeatability across batches. The tool’s geometry, tailored for CCMT 09T3 indexable inserts, permits rapid insert changes and consistent cutting edges, which shortens downtime and simplifies tool management in production environments. Extended reach for deeper bores with maintained stability With a 64 mm cutting length and an overall length of 120 mm, this boring bar offers an extended working reach while keeping the assembly compact and manageable. The combination of an effective diameter at Ø 37 mm and a cutting‑edge configuration suited to indexable inserts allows operators to perform pocketing and finishing operations in confined internal spaces without sacrificing surface integrity. The tool’s balance between reach and shaft dimension is optimised for machining tasks where access is limited but dimensional control remains critical. Practical handling and fast insert changeover to aid throughput Weighing approximately 0.661 kg, the bar provides a lightweight handling experience without compromising on structural support during cuts. Compatibility with the widely used CCMT 09T3 insert format ensures easy sourcing and predictable cutting behaviour, supporting faster changeovers and reduced tool inventory complexity. The indexable‑insert approach also separates cutting edge life from the tool body, lowering life‑cycle costs and simplifying maintenance procedures in the workshop. For fast, reliable supply and technical guidance on integrating the Teknik Makina TKB112TM boring tool into current tooling setups, contact Metav Werkzeuge in Emmerich via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: TKB112TM Manufacturer: Teknik Makina Facts Diameter: 37 mm Maximum cutting diameter: 48 mm Shank diameter: 25 mm Cutting length: 64 mm Overall length: 120 mm Weight: 0.661 kg Special features Compatibility with CCMT 09T3 indexable inserts Designed for internal boring and finishing Indexable insert concept for quick changeover FAQ What insert type does this boring bar use? The TKB112TM accepts CCMT 09T3 indexable inserts, enabling straightforward insert replacement and standardised cutting geometry. What are the key dimensions to check for machine compatibility? Relevant dimensions for fitting are the 25 mm shank diameter, overall length of 120 mm, and the effective diameter of 37 mm. Is the TKB112TM suitable for deep internal bores? The 64 mm cutting length and extended overall length make the bar suitable for deeper internal machining tasks while maintaining stability. How does the indexable insert system benefit production? Indexable inserts such as CCMT 09T3 allow rapid edge renewal, reduced tool downtime and simplified inventory, improving throughput and cost efficiency. Can the TKB112TM be used with standard toolholders? The 25 mm shank is sized for common clamping systems; verify toolholder bore dimensions and clamping capacity for secure fitting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable cutting performance, broad IR27 insert compatibility and an extended reach for consistent turning results; order the K347-1TM directly via Metav Werkzeuge or consult the specialists for application advice. K347-1TM boring bar (SIR S40T) — 48 mm Ø, 300 mm overall length by Teknik Makina A K347-1TM boring bar engineered for right-hand turning with SIR clamping for IR indexable inserts, ideal for medium-duty lathe and turning-centre applications. SIR clamping for IR27 indexable inserts 48 mm outer diameter for stable cutting 300 mm overall length for extended reach Right-hand cutting orientation for standard lathes Engineered stability for consistent material removal The bar delivers stable performance by combining a substantial 48 mm outer diameter with a robust shank, reducing vibration during cutting. This geometry is particularly effective when machining interrupted cuts or harder materials where chatter compromises surface finish. The resulting process reliability helps to maintain dimensional tolerances over longer runs, supporting predictable cycle times and reduced scrap rates. Secure clamping and wide insert compatibility A SIR clamping system provides straightforward insert retention and repeatable seat location, optimised for IR27 inserts to ensure secure engagement and predictable cutting geometry. The clamping arrangement, combined with the specified Torx T20 drive and M5x18 fastening, allows efficient insert changes and reliable torque transmission, which benefits both tool life and operator safety in repetitive tool swaps. Practical design for workshop productivity and serviceability With a 300 mm overall length and a 40 mm shank diameter, the bar balances reach and rigidity for access into deeper workpieces without sacrificing stability. The modular nature of the clamping plate (U‑plate TA065) simplifies maintenance and reduces downtime; spare parts such as the clamping screw and plate are standardised, enabling fast replacement. The compact, service-friendly layout supports fleet standardisation on turning centres and manual lathes alike. Contact Metav Werkzeuge for availability, technical matching and local delivery of the K347-1TM boring bar; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: K347-1TM Name: Boring bar (SIR for IR indexable inserts) Manufacturer: Teknik Makina Dimensions & weight Outer diameter: 48 mm Shank diameter: 40 mm Overall length: 300 mm Cutting height: 60 mm Weight: 2.89 kg Features & compatibility SIR clamping for IR indexable inserts Compatible with 27 IR inserts Clamping holder designation: IR27 ISO designation: SIR S40T Cutting direction: right Torx key: T20 Torx screw: M5x18 U‑plate: TA065 FAQ Which inserts are compatible with this boring bar? The K347-1TM boring bar is designed for IR27 indexable inserts and uses a SIR clamping system to secure the insert reliably. Is the cutting direction right-hand or left-hand? This tool is specified for right-hand cutting, suitable for standard lathe and turning-centre orientations. What are the key dimensions for machine setup? Key setup data: 48 mm outer diameter, 40 mm shank diameter and 300 mm overall length for the K347-1TM boring bar. How is the insert secured to the bar? Insert retention is achieved via the SIR clamping mechanism with a Torx T20 fastener and M5x18 screw paired with the TA065 clamping plate. Can this bar be used for extended-reach turning tasks? Yes, the 300 mm overall length provides extended reach while the robust diameter maintains cutting stability for deeper turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust build and precise insert compatibility to maintain stable, repeatable drilling operations; benefit from the large cutting length for deeper holes and the secure 40 mm shank for reliable clamping. Order the tool via Metav Werkzeuge or consult the Metav team for holder and insert recommendations. U200TM Vollbohrer — Indexable insert drill, Ø 48 mm, 144 mm cutting length (Teknik Makina) U200TM Vollbohrer provides a purpose-built solution for machining centres and toolrooms requiring stable, repeatable holemaking with replaceable Korloy inserts Ø 48 mm cutting diameter Compatible with Korloy WCM-0804 inserts 144 mm effective cutting length 40 mm shank diameter and 68 mm shank length High-performance drilling with measurable stability The tool is configured to deliver a stable drilling platform: the Ø 48 mm diameter together with a substantial overall length of 258 mm increases rigidity for medium- to deep-hole tasks. The 144 mm cutting length gives extended reach without sacrificing control, helping to reduce set-up frequency and minimise cycle-time losses. These dimensions translate into consistent hole quality and less rework in series production, providing a clear efficiency advantage for machining operations that prioritise throughput. Clear compatibility reduces procurement risk Designed for insert-based cutting, the drill accepts Korloy WCM-0804 inserts, enabling quick index changes and reduced tooling downtime. Using replaceable inserts allows separation of body and cutting geometry decisions: operators can keep the robust drill body in service while changing cutting grades to suit material or finish requirements. This approach supports predictable maintenance planning and lowers long-term tooling cost compared with single-piece alternatives. Shank and handling engineered for secure clamping The drill features a 40 mm shank diameter and a 68 mm shank length, values that align with a wide range of standard holders and heavy-duty tool posts. The relatively high mass of 2.486 kg contributes to stability when clamped, while the shank dimensions facilitate straightforward integration into existing toolchains. The combination of secure clamping and balanced mass reduces vibration risk, which in turn extends insert life and maintains hole accuracy over long runs. Practical application: where the design pays off This configuration is aimed at workshops and production lines that require reliable performance for deeper or repetitive drilling tasks. The tool’s geometry and insert compatibility make it suitable for batch production and mixed-series work where changeover speed and predictable machining outcomes matter. The modular nature of insert systems supports quick adaptation to different alloys and finish specifications without replacing the complete drill body. Contact Metav Werkzeuge to verify holder compatibility and secure tailored recommendations for the Teknik Makina U200TM; the Metav team in Emmerich can advise on suitable inserts, holders and delivery options Technical data Article number: U200TM Manufacturer: Teknik Makina Product name: Vollbohrer Facts Diameter: 48 mm Overall length: 258 mm Cutting length: 144 mm Shank diameter: 40 mm Shank length: 68 mm Weight: 2.486 kg Special features Compatible inserts: Korloy WCM-0804 Shank suited to standard 40 mm holders Designed for insert-based drilling FAQ What inserts does the U200TM accept? The U200TM is compatible with Korloy WCM-0804 inserts, allowing rapid index changes and flexible cutting-grade selection. Is the U200TM suitable for deep-hole drilling? With a 144 mm cutting length and 258 mm overall length, the drill is configured for deeper and repetitive holemaking while maintaining stability. Which shank size is required for clamping the drill? The tool uses a 40 mm shank diameter with a 68 mm shank length; these dimensions align with common heavy-duty holders. How does insert use affect maintenance and costs? Using replaceable Korloy inserts on the U200TM reduces downtime for regrinding and lowers long-term tooling expense because the body remains in service while cutting edges are exchanged Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise parting performance and robust clamping: the holder’s 3 mm cutting width and 60 mm cutting height deliver repeatable grooves while the 40 mm shank diameter ensures stable mounting in heavy‑duty setups; order the tool directly via Metav Werkzeuge or consult the team for application advice. Clamping parting tool holder K609TM by Teknik Makina — 3 mm cutting width, 60 mm cutting height A robust clamping parting tool holder designed for industrial grooving and parting operations, compatible with Korloy 3C MGM indexable inserts and built for stable performance in CNC turning applications. 3 mm cutting width for precise parting 60 mm cutting height for deep grooves 40 mm shank diameter for stable clamping Compatible with 3C MGM indexable inserts Consistent, precise parting for repeatable results The holder’s 3 mm cutting width paired with a 60 mm cutting height provides a focused cutting geometry for controlled chip formation and minimal side play. This combination reduces rework by keeping the cut profile consistent across batches. Compatibility with indexable inserts means cutting edges can be renewed without regrinding the body, which shortens machine downtime and supports predictable cycle times. For users seeking measurable improvements in process reliability, this tool body gives a clear engineering advantage. Stable mounting for reduced vibration and longer tool life A 40 mm shank diameter and a substantial mass (approx. 2.94 kg) increase rigidity at the toolholder–spindle interface, lowering chatter and improving surface finish during parting operations. The holder’s geometry and clamping concept are engineered to secure the insert firmly, translating into steadier cutting forces and extended insert life. Operators will find setup tolerances easier to maintain when body stiffness reduces deflection under load, a pragmatic gain in production environments that require repeatable accuracy. Straightforward integration with existing tool setups With an overall length of 300 mm and a body diameter of 48 mm, this holder fits common lathe tool posts and modular tool systems used in series production. The shank designation S40T 3C‑R and the MGM clamping interface facilitate quick identification and interchange with matching carriers and accessories. Because the unit accepts 3C MGM style inserts and is listed as compatible with Korloy insert specifications, it aligns with widely available insert grades to suit varied materials and cutting conditions, simplifying procurement and inventory management. Built for workshop and industrial use Manufactured by Teknik Makina, the K609TM is intended for repetitive parting and grooving tasks where secure clamping and dimensional stability matter. Its compact cutting width combined with substantial cut height allows concentrated operations on slender workpieces as well as deeper groove machining. The design supports production workflows that value uptime and consistent tolerances, making the holder a reliable component in both contract workshops and in‑house production lines. For procurement and technical queries regarding the Teknik Makina K609TM clamping parting tool holder, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility with specific inserts and machine tool setups. Technical data Article number: K609TM Manufacturer: Teknik Makina Facts Overall length: 300 mm Weight: 2.94 kg Shank diameter: 40 mm Cutting width: 3 mm Cutting height: 60 mm Body diameter: 48 mm Special features Compatible inserts: 3C MGM Suitable insert supplier: Korloy Shank designation: S40T 3C‑R Application: parting / grooving FAQ What inserts fit this clamping parting tool holder? The holder accepts 3C MGM style indexable inserts; it is specified as compatible with Korloy inserts and the MGM clamping interface. Is the tool suitable for heavy‑duty parting on larger diameters? The K609TM’s 40 mm shank diameter and robust body mass support stable parting operations; suitability for a specific workpiece diameter depends on machine rigidity and the chosen insert grade. How does the shank designation S40T 3C‑R affect compatibility? S40T 3C‑R describes the shank and mounting form; matching tool posts and carriers that accept S40T shanks will accommodate the holder without modification. Can the clamping concept reduce insert runout and improve finish? The clamping design for MGM inserts secures the cutting edge precisely, which helps to reduce runout and contributes to a more consistent surface finish under correct setup conditions. What dimensions are most relevant when planning a retrofit into an existing tool turret? Key dimensions are the 40 mm shank diameter, 300 mm overall length, and 48 mm body diameter to ensure the holder fits the turret envelope and maintains clearance during parting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of robust indexable‑insert compatibility and rigid mounting geometry: a 48 mm cutting diameter paired with a 40 mm shank and a 153 mm overall length delivers stable thread forms and predictable cycle times. The Torx fixing (M5x18, T20) reduces set‑up effort. Order the tool directly via Metav Werkzeuge or consult the technical team for process integration. Thread milling cutter DC209TM — for S12, S14, S21, S30 and S40 indexable inserts, Ø 48 mm (Teknik Makina) A Thread milling cutter DC209TM engineered for industrial thread milling tasks, compatible with a range of indexable inserts and built for repeatable performance in production environments Thread mill for S12–S40 indexable inserts Ø 48 mm cutting diameter 40 mm shank for rigid mounting Torx fixing M5x18 with T20 key Stable geometry for consistent thread quality The cutter’s construction focuses on stable geometry to maintain thread accuracy across serial production. With a 48 mm nominal cutting diameter and a 153 mm overall length, the design balances reach with rigidity, reducing vibration and improving surface finish. This stability supports predictable tool life and lowers the risk of premature insert wear, which in turn benefits process reliability and scrap reduction in small‑batch and series production. Fast insert changes to reduce downtime Quick and secure insert replacement is enabled by the Torx fixing system: M5x18 screws tightened with a T20 key. The use of standardised indexable inserts for S12, S14, S21, S30 and S40 formats permits straightforward stocking of spare tips and rapid re‑turn to cut. The result is reduced set‑up time and easier maintenance planning, which helps keep machining cells productive and simplifies shift handovers in multi‑operator environments. Engineered for production reliability A 40 mm shank enables a rigid clamping interface in appropriate holders, supporting repeatability and stable axial load transfer during thread milling cycles. The cutter’s proportions are chosen to suit workshop toolholders while preserving the cutting geometry required for consistent thread form generation. The robust mounting contributes directly to surface quality and tool life, supporting predictable machining costs and fewer process interventions. Practical handling and application notes The tool is intended for conventional thread milling operations using indexable inserts; the modular approach allows different insert grades to be chosen for specific workpiece materials and cutting conditions. The 40 mm shank provides secure locking in compatible toolholders, and the Torx screw arrangement simplifies routine checks. Where insert grade selection or holder compatibility requires clarification, refer to the machining strategy or consult technical advice to match cutting data with production demands. Contact Metav Werkzeuge for supply and machining advice on the Teknik Makina DC209TM thread milling cutter; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific setups Technical Data Article number: DC209TM Manufacturer: Teknik Makina eClass: 21180805 ETIM: EC011860 Core measurements Diameter: 48 mm Overall length: 153 mm Shank diameter (Ø): 40 mm Torx screw: M5x18 Torx key: T20 Compatibility & features For S12, S14, S21, S30 and S40 indexable inserts Tool type: Thread milling cutter SKU: DC209TM FAQ Which insert sizes are compatible with this cutter? The cutter is compatible with S12, S14, S21, S30 and S40 indexable inserts; the article DC209TM accepts these standard insert formats for flexible grade and geometry selection. How is the insert secured to the cutter body? Inserts are fixed with an M5x18 Torx screw and tightened using a T20 key, providing a secure and easily serviceable connection. What are the key dimensions to check when mounting? Ensure a holder suitable for a 40 mm shank diameter and sufficient clamp length for the 153 mm overall length; these dimensions are central to achieving the cutter’s designed rigidity. Is the cutter suitable for serial production? Yes; the DC209TM is designed with a rigid shank and stable cutting geometry to support repeatable thread milling in production environments. What should be considered when selecting inserts for different materials? Insert grade and coating should be matched to workpiece material and cutting conditions; the DC209TM accepts standard S‑series inserts so grades can be selected to optimise performance and tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise thread milling, secure clamping and simple insert compatibility for reliable production runs; benefit from the combination of a Ø48 mm cutting diameter, a 40 mm shank and robust Torx fastening — order the tool directly via Metav Werkzeuge or consult the application specialists for tailored advice. Thread milling cutter DC213TM — Ø48 mm, 40 mm shank, for S21, S30 and S40 indexable inserts (Teknik Makina) A Thread milling cutter DC213TM designed for efficient thread generation in CNC operations, compatible with S21, S30 and S40 indexable inserts and engineered for stable clamping and predictable tool life. Precision Ø48 mm thread diameter 40 mm shank for stable clamping Compatible with S21, S30, S40 inserts Torx M5x18 fastening with T20 key Faster, more economical thread production with indexable inserts Thread milling with indexable tooling reduces component rejects and lowers per-thread cost by allowing individual cutting edges to be replaced. The combination of an indexable insert system and the tool’s geometry supports repeatable thread milling cycles on modern CNC lathes and milling centres. Because inserts for different thread profiles can be selected independently, this solution is suitable for mixed production where flexibility and predictable consumable costs matter. The result is a measurable improvement in process efficiency while maintaining component quality. Stable machining through a robust interface and diameter control A consistent clamping interface is essential when producing threads to tolerance. The DC213TM offers a shank Ø 40 mm that provides secure attachment in standard toolholders, reducing run-out and vibration. With a Ø48 mm cutting diameter the tool maintains centreline stability during entry and exit, which helps to preserve flank form and surface finish. This mechanical reliability translates into fewer reworks and longer uninterrupted machining cycles — a decisive advantage in serial production. Quick, repeatable insert retention minimises downtime Tool change and maintenance time are cut by using a single Torx M5x18 screw for insert retention, tightened with a T20 key. The straightforward fastening method simplifies workshop routines, shortens downtime during insert changes and reduces the risk of incorrect assembly. Clear mechanical interfaces and standardised fastenings also make it easier to document maintenance intervals in machine schedules, supporting predictable uptime and easier spare-part planning. Designed for integration into CNC workflows and robust shop floors With an overall length of 210 mm, the tool provides the reach required for many turret and milling spindle set-ups while still offering the rigidity needed for consistent thread form. As a product from Teknik Makina, the cutter is conceived for professional environments where compatibility with S21, S30 and S40 indexable inserts is a central requirement. The construction supports inline process control and is suitable for workshops seeking to centralise tool inventories without sacrificing the ability to adapt to varied thread profiles. Contact Metav Werkzeuge for application-specific guidance on the DC213TM and for help selecting the correct insert grade and clamping arrangement to match production requirements — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: DC213TM Manufacturer: Teknik Makina Product type: Thread milling cutter Facts Diameter: 48 mm Overall length: 210 mm Shank diameter: 40 mm Torx screw: M5x18 Torx key: T20 Special features For S21, S30 and S40 indexable inserts Indexable insert fastening system Compact overall length for turret/spindle use Standard Torx retention for quick insert changes FAQ What insert types fit this cutter? The cutter is compatible with S21, S30 and S40 indexable inserts as specified for flexible thread machining. Is the shank size suitable for standard toolholders? Yes, the tool has a 40 mm shank diameter designed for standard clamping systems to ensure stable retention. Which fastening is used for the insert? Insert retention is secured by a Torx M5x18 screw, tightened with a T20 key to provide repeatable clamping. What is the overall length and how does it affect setup? The overall length is 210 mm, offering sufficient reach for many turret and milling spindle set-ups while balancing rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 49 mm cutting diameter and a 300 mm overall length to achieve stable, repeatable internal boring with VER27 indexable inserts; order the drill bar directly via Metav Werkzeuge or request technical advice from the sales team. Drill bar for VER27 indexable inserts — 49 mm diameter, L300 mm (Teknik Makina) Drill bar engineered for indexable-insert boring operations, compatible with VER27 inserts and suited to production and workshop machining tasks. 49 mm nominal diameter for rigid cutting 300 mm overall length for deeper reaches Compatible with VER27 indexable inserts 40 mm shank diameter for secure mounting Stable, high-precision boring through larger diameter and length The tool’s 49 mm nominal diameter combined with a 300 mm overall length provides a favourable stiffness-to-length ratio that supports stable cutting in internal boring applications. By accepting VER27 indexable inserts, the system separates cutting geometry from the bar itself, enabling fast insert changes and consistent edge geometry for repeatable results. Indexable inserts reduce setup time and materials waste compared with brazed tips, while enabling easy replacement when wear occurs. This configuration benefits production runs where maintaining surface finish and dimensional accuracy across multiple parts is critical. Secure mounting and quick insert handling to reduce downtime A 40 mm shank ensures robust seating in standard holders, minimising micro-movement that can generate chatter or uneven tool wear. The clamping head is 25 mm wide, which provides a compact interface for the insert seat and promotes even clamping forces across the cutting edge. Clamping screws are tightened with a T20 Torx key, specified for repeatable torque application and straightforward maintenance. These design choices translate into fewer interruptions on the shop floor, lower rework rates and a measurable improvement in cycle-time efficiency for indexable-insert operations. Integration into workshop tooling and production lines Designed for machine-shop environments, the bar is compatible with common tool posts and boring heads where a 40 mm shank is accepted, facilitating straightforward integration into existing setups. The overall mass of the assembly (approx. 3.11 kg) contributes to inertial stability during cutting, while the modular nature of indexable inserts supports economical stocking strategies: replacement inserts rather than whole-tool renewals. Specification-led procurement and clear technical data simplify purchasing and spare-part planning, which aligns with Metav’s approach to reliable supply and centralised workshop provisioning. For ordering and compatibility checks, choose Teknik Makina’s robust 49 mm drill bar and contact Metav Werkzeuge for detailed integration support and procurement assistance. Technical data Article number: K345-6TM Label: 49mm Bohrstange VER27 L300mm Product type: Drill bar Brand: Teknik Makina Diameter: 49 mm Overall length: 300 mm Shank diameter: 40 mm Clamping head width: 25 mm Weight: 3.11 kg eClass: 21180806 Compatible with VER27 indexable inserts Torx key required: T20 Category: Drill bars FAQ Which indexable inserts fit the bar? The bar is compatible with VER27 indexable inserts as specified for the Tekniк Makina K345-6TM drill bar. What are the main dimensions of the tool? The tool features a 49 mm diameter and an overall length of 300 mm, with a 40 mm shank diameter. What clamping interface is used for the inserts? Insert clamping is handled via a 25 mm clamping head with screws requiring a T20 Torx key for secure tightening. Is the shank suitable for standard toolholders? A 40 mm shank is specified to ensure secure mounting in holders and tool posts designed for that shank size. What advantages do indexable inserts provide in this setup? Using indexable inserts allows rapid edge replacement, consistent cutting geometry and cost-efficient spare-part stocking compared with fixed-tip tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a wide Ø 49 mm cutting diameter, a deep 147 mm cutting length and a robust 40 mm shank for steady, high‑throughput drilling in production environments; order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. Vollbohrer (Indexable Drill) U201TM — Ø 49 mm, 261 mm overall length (Teknik Makina) The Vollbohrer (Indexable Drill) U201TM is an industrial indexable drill designed for deep-hole and heavy-duty drilling operations where insert replacement and stable toolholding reduce downtime and running costs Ø 49 mm drill diameter Compatible with Korloy WCM-0804 inserts 147 mm cutting length for deep holes 40 mm shank with 261 mm overall length Consistent throughput for deep-hole machining With a substantial Ø 49 mm diameter and 147 mm cutting length, this indexable solution provides stable metal removal for prolonged cycles. The tool’s geometry is optimised for axial rigidity, which reduces vibration and improves hole accuracy; this leads to fewer reworks and steadier component quality. Such construction supports uninterrupted production runs and a reliable machining window for finishing and roughing passes. Economical machining through insert compatibility Compatibility with Korloy WCM-0804 inserts converts tool performance into cost efficiency: worn cutting edges are replaced quickly without discarding the body, lowering consumable costs and minimising machine downtime. An indexable design separates cutting geometry from the tool body, enabling tailored insert grades for specific materials and processes while preserving the holder for many cycles — a decisive advantage in batch production and repair workshops. Secure clamping and dynamic balance for superior surface finish A 40 mm shank and 68 mm shank length combine with the tool mass to provide secure clamping and reduced runout. The resulting stable interface between spindle and tool improves concentricity and surface finish in hole walls, which is particularly beneficial when tight geometric tolerances are required. The tool’s mass distribution also assists in vibration damping during deep cuts, extending insert life and stabilising cycle times. Designed for production workshops and jobbing shops This indexable drill is aimed at industrial users who value predictable performance and easy serviceability. The substantial 261 mm overall length offers reach for through and semi‑through holes while retaining the mechanical stability required in production environments. As an engineered component within a wider tooling system, the holder is suited to repeatable manufacturing processes and integrates into standard tool change routines without complex setup. Discuss application requirements with Metav Werkzeuge to determine whether Teknik Cutting Tools’ U201TM indexable drill best fits the intended machining task and to arrange reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U201TM Name: Vollbohrer Manufacturer: Teknik Makina SKU: U201TM Numeric specifications Diameter: 49 mm Overall length: 261 mm Cutting length: 147 mm Shank diameter: 40 mm Shank length: 68 mm Weight: 5.562 kg Features and compatibility Compatible inserts: WCM- 0804 Compatible insert manufacturer: Korloy Product type: Indexable drill FAQ What hole diameter does this tool produce? The tool produces holes with a nominal diameter of 49 mm, as specified for the U201TM indexable drill. Which inserts are compatible with the holder? The holder accepts Korloy WCM-0804 indexable inserts, enabling fast replacement and flexible grade selection. How deep can this drill cut in a single pass? The effective cutting length is 147 mm; the overall length of the tool is 261 mm, providing reach for deep-hole operations. What shank dimensions ensure secure clamping? The tool features a 40 mm shank diameter with a 68 mm shank length, designed for robust clamping and reduced runout. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com